Revision ed8fe20205ac054bf585156709de3913d1890f30 authored by Heiner Kallweit on 28 February 2019, 06:39:15 UTC, committed by David S. Miller on 02 March 2019, 05:37:05 UTC
When debugging another issue I faced an interrupt storm in this driver (88E6390, port 9 in SGMII mode), consisting of alternating link-up / link-down interrupts. Analysis showed that the driver wanted to set a cmode that was set already. But so far mv88e6390x_port_set_cmode() doesn't check this and powers down SERDES, what causes the link to break, and eventually results in the described interrupt storm. Fix this by checking whether the cmode actually changes. We want that the very first call to mv88e6390x_port_set_cmode() always configures the registers, therefore initialize port.cmode with a value that is different from any supported cmode value. We have to take care that we only init the ports cmode once chip->info->num_ports is set. v2: - add small helper and init the number of actual ports only Fixes: 364e9d7776a3 ("net: dsa: mv88e6xxx: Power on/off SERDES on cmode change") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent 5e1a99e
File | Mode | Size |
---|---|---|
Documentation | ||
LICENSES | ||
arch | ||
block | ||
certs | ||
crypto | ||
drivers | ||
firmware | ||
fs | ||
include | ||
init | ||
ipc | ||
kernel | ||
lib | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
tools | ||
usr | ||
virt | ||
.clang-format | -rw-r--r-- | 13.9 KB |
.cocciconfig | -rw-r--r-- | 59 bytes |
.get_maintainer.ignore | -rw-r--r-- | 31 bytes |
.gitattributes | -rw-r--r-- | 30 bytes |
.gitignore | -rw-r--r-- | 1.5 KB |
.mailmap | -rw-r--r-- | 10.7 KB |
COPYING | -rw-r--r-- | 423 bytes |
CREDITS | -rw-r--r-- | 96.8 KB |
Kbuild | -rw-r--r-- | 1.7 KB |
Kconfig | -rw-r--r-- | 563 bytes |
MAINTAINERS | -rw-r--r-- | 482.5 KB |
Makefile | -rw-r--r-- | 59.1 KB |
README | -rw-r--r-- | 727 bytes |
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...