Revision f00b534ded60bd0a23c2fa8dec4ece52aa7d235f authored by Stephane Grosjean on 01 December 2016, 10:41:12 UTC, committed by Marc Kleine-Budde on 01 December 2016, 13:12:20 UTC
This adds support for PEAK-System PCAN-USB X6 USB to CAN interface. The CAN FD adapter PCAN-USB X6 allows the connection of up to 6 CAN FD or CAN networks to a computer via USB. The interface is installed in an aluminum profile casing and is shipped in versions with D-Sub connectors or M12 circular connectors. The PCAN-USB X6 registers in the USB sub-system as if 3x PCAN-USB-Pro FD adapters were plugged. So, this patch: - updates the PEAK_USB entry of the corresponding Kconfig file - defines and adds the device id. of the PCAN-USB X6 (0x0014) into the table of supported device ids - defines and adds the new software structure implementing the PCAN-USB X6, which is obviously a clone of the software structure implementing the PCAN-USB Pro FD. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
1 parent fe5b406
File | Mode | Size |
---|---|---|
Documentation | ||
arch | ||
block | ||
certs | ||
crypto | ||
drivers | ||
firmware | ||
fs | ||
include | ||
init | ||
ipc | ||
kernel | ||
lib | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
tools | ||
usr | ||
virt | ||
.cocciconfig | -rw-r--r-- | 59 bytes |
.get_maintainer.ignore | -rw-r--r-- | 31 bytes |
.gitattributes | -rw-r--r-- | 30 bytes |
.gitignore | -rw-r--r-- | 1.3 KB |
.mailmap | -rw-r--r-- | 7.5 KB |
COPYING | -rw-r--r-- | 18.3 KB |
CREDITS | -rw-r--r-- | 96.0 KB |
Kbuild | -rw-r--r-- | 2.8 KB |
Kconfig | -rw-r--r-- | 252 bytes |
MAINTAINERS | -rw-r--r-- | 373.8 KB |
Makefile | -rw-r--r-- | 57.5 KB |
README | -rw-r--r-- | 17.9 KB |
REPORTING-BUGS | -rw-r--r-- | 7.3 KB |
Computing file changes ...