https://github.com/charguer/ocaml
Tip revision: 98ab56329071643bd41516d6a4072d7f66267c04 authored by Damien Doligez on 21 January 2008, 14:15:59 UTC
resize that does not refresh the values
resize that does not refresh the values
Tip revision: 98ab563
configure
#! /bin/sh
#########################################################################
# #
# Objective Caml #
# #
# Xavier Leroy, projet Cristal, INRIA Rocquencourt #
# #
# Copyright 1999 Institut National de Recherche en Informatique et #
# en Automatique. All rights reserved. This file is distributed #
# under the terms of the GNU Library General Public License, with #
# the special exception on linking described in file LICENSE. #
# #
#########################################################################
# $Id$
configure_options="$*"
prefix=/usr/local
bindir=''
libdir=''
mandir=''
manext=1
host_type=unknown
ccoption=''
cclibs=''
curseslibs=''
mathlib='-lm'
dllib=''
x11_include_dir=''
x11_lib_dir=''
tk_wanted=yes
pthread_wanted=yes
tk_defs=''
tk_libs=''
tk_x11=yes
dl_defs=''
verbose=no
withcurses=yes
withsharedlibs=yes
gcc_warnings="-Wall"
# Try to turn internationalization off, can cause config.guess to malfunction!
unset LANG
unset LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES LC_MONETARY LC_NUMERIC LC_TIME
# Turn off some MacOS X debugging stuff, same reason
unset RC_TRACE_ARCHIVES RC_TRACE_DYLIBS RC_TRACE_PREBINDING_DISABLED
# Parse command-line arguments
while : ; do
case "$1" in
"") break;;
-prefix|--prefix)
prefix=$2; shift;;
-bindir|--bindir)
bindir=$2; shift;;
-libdir|--libdir)
libdir=$2; shift;;
-mandir|--mandir)
case "$2" in
*/man[1-9ln])
mandir=`echo $2 | sed -e 's|^\(.*\)/man.$|\1|'`
manext=`echo $2 | sed -e 's/^.*\(.\)$/\1/'`;;
*)
mandir=$2
manext=1;;
esac
shift;;
-host*|--host*)
host_type=$2; shift;;
-cc*)
ccoption="$2"; shift;;
-lib*)
cclibs="$2 $cclibs"; shift;;
-no-curses)
withcurses=no;;
-no-shared-libs)
withsharedlibs=no;;
-x11include*|--x11include*)
x11_include_dir=$2; shift;;
-x11lib*|--x11lib*)
x11_lib_dir=$2; shift;;
-with-pthread*|--with-pthread*)
;; # Ignored for backward compatibility
-no-pthread*|--no-pthread*)
pthread_wanted=no;;
-no-tk|--no-tk)
tk_wanted=no;;
-tkdefs*|--tkdefs*)
tk_defs=$2; shift;;
-tklibs*|--tklibs*)
tk_libs=$2; shift;;
-tk-no-x11|--tk-no-x11)
tk_x11=no;;
-dldefs*|--dldefs*)
dl_defs="$2"; shift;;
-dllibs*|--dllibs*)
dllib="$2"; shift;;
-verbose|--verbose)
verbose=yes;;
*) echo "Unknown option \"$1\"." 1>&2; exit 2;;
esac
shift
done
# Sanity checks
case "$prefix" in
/*) ;;
*) echo "The -prefix directory must be absolute." 1>&2; exit 2;;
esac
case "$bindir" in
/*) ;;
"") ;;
*) echo "The -bindir directory must be absolute." 1>&2; exit 2;;
esac
case "$libdir" in
/*) ;;
"") ;;
*) echo "The -libdir directory must be absolute." 1>&2; exit 2;;
esac
case "$mandir" in
/*) ;;
"") ;;
*) echo "The -mandir directory must be absolute." 1>&2; exit 2;;
esac
# Generate the files
cd config/auto-aux
rm -f s.h m.h Makefile
touch s.h m.h Makefile
# Write options to Makefile
echo "# generated by ./configure $configure_options" >> Makefile
# Where to install
echo "PREFIX=$prefix" >> Makefile
case "$bindir" in
"") echo 'BINDIR=$(PREFIX)/bin' >> Makefile
bindir="$prefix/bin";;
*) echo "BINDIR=$bindir" >> Makefile;;
esac
case "$libdir" in
"") echo 'LIBDIR=$(PREFIX)/lib/ocaml' >> Makefile
libdir="$prefix/lib/ocaml";;
*) echo "LIBDIR=$libdir" >> Makefile;;
esac
echo 'STUBLIBDIR=$(LIBDIR)/stublibs' >> Makefile
case "$mandir" in
"") echo 'MANDIR=$(PREFIX)/man' >> Makefile
mandir="$prefix/man";;
*) echo "MANDIR=$mandir" >> Makefile;;
esac
echo "MANEXT=$manext" >> Makefile
# Determine the system type
if test "$host_type" = "unknown"; then
if host_type=`../gnu/config.guess`; then :; else
echo "Cannot guess host type"
echo "You must specify one with the -host option"
exit 2
fi
fi
if host=`../gnu/config.sub $host_type`; then :; else
echo "Please specify the correct host type with the -host option"
exit 2
fi
echo "Configuring for a $host ..."
# Do we have gcc?
if test -z "$ccoption"; then
if sh ./searchpath gcc; then
echo "gcc found"
cc=gcc
else
cc=cc
fi
else
cc="$ccoption"
fi
# Check for buggy versions of GCC
buggycc="no"
case "$host,$cc" in
i[3456]86-*-*,gcc*)
case `$cc --version` in
2.7.2.1) cat <<'EOF'
WARNING: you are using gcc version 2.7.2.1 on an Intel x86 processor.
This version of gcc is known to generate incorrect code for the
Objective Caml runtime system on some Intel x86 machines. (The symptom
is a crash of boot/ocamlc when compiling stdlib/pervasives.mli.)
In particular, the version of gcc 2.7.2.1 that comes with
Linux RedHat 4.x / Intel is affected by this problem.
Other Linux distributions might also be affected.
If you are using one of these configurations, you are strongly advised
to use another version of gcc, such as 2.95, which are
known to work well with Objective Caml.
Press <enter> to proceed or <interrupt> to stop.
EOF
read reply;;
2.96*) cat <<'EOF'
WARNING: you are using gcc version 2.96 on an Intel x86 processor.
Certain patched versions of gcc 2.96 are known to generate incorrect
code for the Objective Caml runtime system. (The symptom is a segmentation
violation on boot/ocamlc.) Those incorrectly patched versions can be found
in RedHat 7.2 and Mandrake 8.0 and 8.1; other Linux distributions
might also be affected. (See bug #57760 on bugzilla.redhat.com)
Auto-configuration will now select gcc compiler flags that work around
the problem. Still, if you observe segmentation faults while running
ocamlc or ocamlopt, you are advised to try another version of gcc,
such as 2.95.3 or 3.2.
EOF
buggycc="gcc.2.96";;
esac;;
esac
# Configure the bytecode compiler
bytecc="$cc"
bytecccompopts=""
bytecclinkopts=""
ostype="Unix"
exe=""
case "$bytecc,$host" in
cc,*-*-nextstep*)
# GNU C extensions disabled, but __GNUC__ still defined!
bytecccompopts="-fno-defer-pop $gcc_warnings -U__GNUC__ -posix"
bytecclinkopts="-posix";;
*,*-*-rhapsody*)
# Almost the same as NeXTStep
bytecccompopts="-fno-defer-pop $gcc_warnings -DSHRINKED_GNUC"
mathlib="";;
*,*-*-darwin*)
# Almost the same as rhapsody
bytecccompopts="-fno-defer-pop -no-cpp-precomp $gcc_warnings"
mathlib="";;
*,*-*-beos*)
bytecccompopts="-fno-defer-pop $gcc_warnings"
# No -lm library
mathlib="";;
gcc,alpha*-*-osf*)
bytecccompopts="-fno-defer-pop $gcc_warnings"
if cc="$bytecc" sh ./hasgot -mieee; then
bytecccompopts="-mieee $bytecccompopts";
fi
# Put code and static data in lower 4GB
bytecclinkopts="-Wl,-T,12000000 -Wl,-D,14000000"
# Tell gcc that we can use 32-bit code addresses for threaded code
echo "#define ARCH_CODE32" >> m.h;;
cc,alpha*-*-osf*)
bytecccompopts="-std1 -ieee";;
gcc,alpha*-*-linux*)
if cc="$bytecc" sh ./hasgot -mieee; then
bytecccompopts="-mieee $bytecccompopts";
fi;;
cc,mips-*-irix6*)
# Add -n32 flag to ensure compatibility with native-code compiler
bytecccompopts="-n32"
# Turn off warning "unused library"
bytecclinkopts="-n32 -Wl,-woff,84";;
cc*,mips-*-irix6*)
# (For those who want to force "cc -64")
# Turn off warning "unused library"
bytecclinkopts="-Wl,-woff,84";;
*,alpha*-*-unicos*)
# For the Cray T3E
bytecccompopts="-DUMK";;
gcc*,powerpc-*-aix*)
# Avoid name-space pollution by requiring Unix98-conformant includes
bytecccompopts="-fno-defer-pop $gcc_warnings -D_XOPEN_SOURCE=500";;
*,powerpc-*-aix*)
bytecccompopts="-D_XOPEN_SOURCE=500";;
gcc*,*-*-cygwin*)
bytecccompopts="-fno-defer-pop $gcc_warnings -U_WIN32"
exe=".exe"
ostype="Cygwin";;
gcc*,x86_64-*-linux*)
bytecccompopts="-fno-defer-pop $gcc_warnings"
# Tell gcc that we can use 32-bit code addresses for threaded code
# unless we are compiled for a shared library (-fPIC option)
echo "#ifndef __PIC__" >> m.h
echo "# define ARCH_CODE32" >> m.h
echo "#endif" >> m.h;;
gcc*)
bytecccompopts="-fno-defer-pop $gcc_warnings";;
esac
# Configure compiler to use in further tests
cc="$bytecc -O $bytecclinkopts"
export cc cclibs verbose
# Check C compiler
sh ./runtest ansi.c
case $? in
0) echo "The C compiler is ANSI-compliant.";;
1) echo "The C compiler $cc is not ANSI-compliant."
echo "You need an ANSI C compiler to build Objective Caml."
exit 2;;
*) echo "Unable to compile the test program."
echo "Make sure the C compiler $cc is properly installed."
exit 2;;
esac
# Check the sizes of data types
echo "Checking the sizes of integers and pointers..."
set `sh ./runtest sizes.c`
case "$2,$3" in
4,4) echo "OK, this is a regular 32 bit architecture."
echo "#undef ARCH_SIXTYFOUR" >> m.h;;
*,8) echo "Wow! A 64 bit architecture!"
echo "#define ARCH_SIXTYFOUR" >> m.h;;
*,*) echo "This architecture seems to be neither 32 bits nor 64 bits."
echo "Objective Caml won't run on this architecture."
exit 2;;
*) echo "Unable to compile the test program."
echo "Make sure the C compiler $cc is properly installed."
exit 2;;
esac
if test $1 != 4 && test $2 != 4 && test $4 != 4; then
echo "Sorry, we can't find a 32-bit integer type"
echo "(sizeof(short) = $4, sizeof(int) = $1, sizeof(long) = $2)"
echo "Objective Caml won't run on this architecture."
exit 2
fi
echo "#define SIZEOF_INT $1" >> m.h
echo "#define SIZEOF_LONG $2" >> m.h
echo "#define SIZEOF_PTR $3" >> m.h
echo "#define SIZEOF_SHORT $4" >> m.h
if test $2 = 8; then
echo "#define ARCH_INT64_TYPE long" >> m.h
echo "#define ARCH_UINT64_TYPE unsigned long" >> m.h
echo '#define ARCH_INT64_PRINTF_FORMAT "l"' >> m.h
int64_native=true
else
sh ./runtest longlong.c
case $? in
0) echo "64-bit \"long long\" integer type found (printf with \"%ll\")."
echo "#define ARCH_INT64_TYPE long long" >> m.h
echo "#define ARCH_UINT64_TYPE unsigned long long" >> m.h
echo '#define ARCH_INT64_PRINTF_FORMAT "ll"' >> m.h
int64_native=true;;
1) echo "64-bit \"long long\" integer type found (printf with \"%q\")."
echo "#define ARCH_INT64_TYPE long long" >> m.h
echo "#define ARCH_UINT64_TYPE unsigned long long" >> m.h
echo '#define ARCH_INT64_PRINTF_FORMAT "q"' >> m.h
int64_native=true;;
2) echo "64-bit \"long long\" integer type found (but no printf)."
echo "#define ARCH_INT64_TYPE long long" >> m.h
echo "#define ARCH_UINT64_TYPE unsigned long long" >> m.h
echo '#undef ARCH_INT64_PRINTF_FORMAT' >> m.h
int64_native=true;;
*) echo "No suitable 64-bit integer type found, will use software emulation."
echo "#undef ARCH_INT64_TYPE" >> m.h
echo "#undef ARCH_UINT64_TYPE" >> m.h
echo '#undef ARCH_INT64_PRINTF_FORMAT' >> m.h
int64_native=false;;
esac
fi
if test $3 = 8 && test $int64_native = false; then
echo "This architecture has 64-bit pointers but no 64-bit integer type."
echo "Objective Caml won't run on this architecture."
exit 2
fi
# Determine endianness
sh ./runtest endian.c
case $? in
0) echo "This is a big-endian architecture."
echo "#define ARCH_BIG_ENDIAN" >> m.h;;
1) echo "This is a little-endian architecture."
echo "#undef ARCH_BIG_ENDIAN" >> m.h;;
2) echo "This architecture seems to be neither big endian nor little endian."
echo "Objective Caml won't run on this architecture."
exit 2;;
*) echo "Something went wrong during endianness determination."
echo "You'll have to figure out endianness yourself"
echo "(option ARCH_BIG_ENDIAN in m.h).";;
esac
# Determine alignment constraints
case "$host" in
sparc*-*-*|hppa*-*-*)
# On Sparc V9 with certain versions of gcc, determination of double
# alignment is not reliable (PR#1521), hence force it.
# Same goes for hppa.
# But there's a knack (PR#2572):
# if we're in 64-bit mode (sizeof(long) == 8),
# we must not doubleword-align floats...
if test $2 = 8; then
echo "Doubles can be word-aligned."
echo "#undef ARCH_ALIGN_DOUBLE" >> m.h
else
echo "Doubles must be doubleword-aligned."
echo "#define ARCH_ALIGN_DOUBLE" >> m.h
fi;;
*)
sh ./runtest dblalign.c
case $? in
0) echo "Doubles can be word-aligned."
echo "#undef ARCH_ALIGN_DOUBLE" >> m.h;;
1) echo "Doubles must be doubleword-aligned."
echo "#define ARCH_ALIGN_DOUBLE" >> m.h;;
*) echo "Something went wrong during alignment determination for doubles."
echo "I'm going to assume this architecture has alignment constraints over doubles."
echo "That's a safe bet: Objective Caml will work even if"
echo "this architecture has actually no alignment constraints."
echo "#define ARCH_ALIGN_DOUBLE" >> m.h;;
esac;;
esac
if $int64_native; then
case "$host" in
sparc*-*-*|hppa*-*-*)
if test $2 = 8; then
echo "64-bit integers can be word-aligned."
echo "#undef ARCH_ALIGN_INT64" >> m.h
else
echo "64-bit integers must be doubleword-aligned."
echo "#define ARCH_ALIGN_INT64" >> m.h
fi;;
*)
sh ./runtest int64align.c
case $? in
0) echo "64-bit integers can be word-aligned."
echo "#undef ARCH_ALIGN_INT64" >> m.h;;
1) echo "64-bit integers must be doubleword-aligned."
echo "#define ARCH_ALIGN_INT64" >> m.h;;
*) echo "Something went wrong during alignment determination for 64-bit integers."
echo "I'm going to assume this architecture has alignment constraints."
echo "That's a safe bet: Objective Caml will work even if"
echo "this architecture has actually no alignment constraints."
echo "#define ARCH_ALIGN_INT64" >> m.h;;
esac
esac
else
echo "#undef ARCH_ALIGN_INT64" >> m.h
fi
# Check semantics of division and modulus
sh ./runtest divmod.c
case $? in
0) echo "Native division and modulus have round-towards-zero semantics, will use them."
echo "#undef NONSTANDARD_DIV_MOD" >> m.h;;
1) echo "Native division and modulus do not have round-towards-zero semantics, will use software emulation."
echo "#define NONSTANDARD_DIV_MOD" >> m.h;;
*) echo "Something went wrong while checking native division and modulus, please report it."
echo "#define NONSTANDARD_DIV_MOD" >> m.h;;
esac
# Shared library support
shared_libraries_supported=false
dl_needs_underscore=false
sharedcccompopts=''
mksharedlib=''
byteccrpath=''
mksharedlibrpath=''
if test $withsharedlibs = "yes"; then
case "$host" in
*-*-linux-gnu|*-*-linux|*-*-freebsd[3-9]*|*-*-gnu*)
sharedcccompopts="-fPIC"
mksharedlib="$bytecc -shared -o"
bytecclinkopts="$bytecclinkopts -Wl,-E"
byteccrpath="-Wl,-rpath,"
mksharedlibrpath="-Wl,-rpath,"
shared_libraries_supported=true;;
alpha*-*-osf*)
case "$bytecc" in
gcc*)
sharedcccompopts="-fPIC"
mksharedlib="$bytecc -shared -o"
byteccrpath="-Wl,-rpath,"
mksharedlibrpath="-Wl,-rpath,"
shared_libraries_supported=true;;
cc*)
sharedcccompopts=""
mksharedlib="ld -shared -expect_unresolved '*' -o"
byteccrpath="-Wl,-rpath,"
mksharedlibrpath="-rpath "
shared_libraries_supported=true;;
esac;;
*-*-solaris2*)
case "$bytecc" in
gcc*)
sharedcccompopts="-fPIC"
if sh ./solaris-ld; then
mksharedlib="$bytecc -shared -o"
byteccrpath="-R"
mksharedlibrpath="-R"
else
mksharedlib="$bytecc -shared -o"
bytecclinkopts="$bytecclinkopts -Wl,-E"
byteccrpath="-Wl,-rpath,"
mksharedlibrpath="-Wl,-rpath,"
fi
shared_libraries_supported=true;;
*)
sharedcccompopts="-KPIC"
byteccrpath="-R"
mksharedlibrpath="-R"
mksharedlib="/usr/ccs/bin/ld -G -o"
shared_libraries_supported=true;;
esac;;
mips*-*-irix[56]*)
case "$bytecc" in
cc*) sharedcccompopts="";;
gcc*) sharedcccompopts="-fPIC";;
esac
mksharedlib="ld -shared -rdata_shared -o"
byteccrpath="-Wl,-rpath,"
mksharedlibrpath="-rpath "
shared_libraries_supported=true;;
powerpc-apple-darwin*)
mksharedlib="cc -bundle -flat_namespace -undefined suppress -o"
bytecccompopts="$dl_defs $bytecccompopts"
#sharedcccompopts="-fnocommon"
dl_needs_underscore=true
shared_libraries_supported=true;;
esac
fi
# Further machine-specific hacks
case "$host" in
ia64-*-linux*|alpha*-*-linux*|x86_64-*-linux*)
echo "Will use mmap() instead of malloc() for allocation of major heap chunks."
echo "#define USE_MMAP_INSTEAD_OF_MALLOC" >> s.h;;
esac
# Configure the native-code compiler
arch=none
model=default
system=unknown
case "$host" in
alpha*-*-osf*) arch=alpha; system=digital;;
alpha*-*-linux*) arch=alpha; system=linux;;
alpha*-*-gnu*) arch=alpha; system=gnu;;
alpha*-*-freebsd*) arch=alpha; system=freebsd;;
alpha*-*-netbsd*) arch=alpha; system=netbsd;;
alpha*-*-openbsd*) arch=alpha; system=openbsd;;
sparc*-*-sunos4.*) arch=sparc; system=sunos;;
sparc*-*-solaris2.*) arch=sparc; system=solaris;;
sparc*-*-*bsd*) arch=sparc; system=bsd;;
sparc*-*-linux*) arch=sparc; system=linux;;
sparc*-*-gnu*) arch=sparc; system=gnu;;
i[3456]86-*-linux*) arch=i386; system=linux_`sh ./runtest elf.c`;;
i[3456]86-*-*bsd*) arch=i386; system=bsd_`sh ./runtest elf.c`;;
i[3456]86-*-nextstep*) arch=i386; system=nextstep;;
i[3456]86-*-solaris*) arch=i386; system=solaris;;
i[3456]86-*-beos*) arch=i386; system=beos;;
i[3456]86-*-cygwin*) arch=i386; system=cygwin;;
i[3456]86-*-darwin*) arch=i386; system=macosx;;
i[3456]86-*-gnu*) arch=i386; system=gnu;;
mips-*-irix6*) arch=mips; system=irix;;
hppa1.1-*-hpux*) arch=hppa; system=hpux;;
hppa2.0*-*-hpux*) arch=hppa; system=hpux;;
hppa*-*-linux*) arch=hppa; system=linux;;
hppa*-*-gnu*) arch=hppa; system=gnu;;
powerpc-*-linux*) arch=power; model=ppc; system=elf;;
powerpc-*-netbsd*) arch=power; model=ppc; system=bsd;;
powerpc-*-rhapsody*) arch=power; model=ppc; system=rhapsody;;
powerpc-*-darwin*) arch=power; model=ppc; system=rhapsody;;
arm*-*-linux*) arch=arm; system=linux;;
arm*-*-gnu*) arch=arm; system=gnu;;
ia64-*-linux*) arch=ia64; system=linux;;
ia64-*-gnu*) arch=ia64; system=gnu;;
ia64-*-freebsd*) arch=ia64; system=freebsd;;
x86_64-*-linux*) arch=amd64; system=linux;;
x86_64-*-gnu*) arch=amd64; system=gnu;;
x86_64-*-freebsd*) arch=amd64; system=freebsd;;
x86_64-*-openbsd*) arch=amd64; system=openbsd;;
esac
if test -z "$ccoption"; then
case "$arch,$system,$cc" in
alpha,digital,gcc*) nativecc=cc;;
mips,*,gcc*) nativecc=cc;;
*) nativecc="$bytecc";;
esac
else
nativecc="$ccoption"
fi
nativecccompopts=''
nativecclinkopts=''
nativeccrpath="$byteccrpath"
case "$arch,$nativecc,$system,$host_type" in
alpha,cc*,digital,*) nativecccompopts=-std1;;
mips,cc*,irix,*) nativecccompopts=-n32
nativecclinkopts="-n32 -Wl,-woff,84";;
*,*,nextstep,*) nativecccompopts="$gcc_warnings -U__GNUC__ -posix"
nativecclinkopts="-posix";;
*,*,rhapsody,*darwin[1-5].*)
nativecccompopts="$gcc_warnings -DSHRINKED_GNUC";;
*,*,rhapsody,*)
nativecccompopts="$gcc_warnings -DDARWIN_VERSION_6 $dl_defs";;
*,gcc*,cygwin,*) nativecccompopts="$gcc_warnings -U_WIN32";;
*,gcc*,*,*) nativecccompopts="$gcc_warnings";;
esac
asflags=''
aspp='$(AS)'
asppflags=''
asppprofflags='-DPROFILING'
case "$arch,$model,$system" in
alpha,*,digital) asflags='-O2'; asppflags='-O2 -DSYS_$(SYSTEM)';
asppprofflags='-pg -DPROFILING';;
alpha,*,linux) aspp='gcc'; asppflags='-c -DSYS_$(SYSTEM)';;
alpha,*,gnu) aspp='gcc'; asppflags='-c -DSYS_$(SYSTEM)';;
alpha,*,freebsd) aspp='gcc'; asppflags='-c -DSYS_$(SYSTEM)';;
alpha,*,netbsd) aspp='gcc'; asppflags='-c -DSYS_$(SYSTEM)';;
alpha,*,openbsd) aspp='gcc'; asppflags='-c -DSYS_$(SYSTEM)';;
mips,*,irix) asflags='-n32 -O2'; asppflags="$asflags";;
sparc,*,bsd) aspp='gcc'; asppflags='-c -DSYS_$(SYSTEM)';;
sparc,*,linux) aspp='gcc'; asppflags='-c -DSYS_$(SYSTEM)';;
sparc,*,gnu) aspp='gcc'; asppflags='-c -DSYS_$(SYSTEM)';;
sparc,*,*) case "$cc" in
gcc*) aspp='gcc'; asppflags='-c -DSYS_$(SYSTEM)';;
*) asppflags='-P -DSYS_$(SYSTEM)';;
esac;;
i386,*,solaris) aspp='/usr/ccs/bin/as'; asppflags='-P -DSYS_$(SYSTEM)';;
i386,*,*) aspp='gcc'; asppflags='-c -DSYS_$(SYSTEM)';;
hppa,*,*) aspp="$cc"; asppflags='-traditional -c -DSYS_$(SYSTEM)';;
power,*,elf) aspp='gcc'; asppflags='-c';;
power,*,bsd) aspp='gcc'; asppflags='-c -DSYS_$(SYSTEM)';;
power,*,rhapsody) ;;
arm,*,linux) aspp='gcc'; asppflags='-c -DSYS_$(SYSTEM)';;
arm,*,gnu) aspp='gcc'; asppflags='-c -DSYS_$(SYSTEM)';;
ia64,*,*) asflags=-xexplicit
aspp='gcc'; asppflags='-c -DSYS_$(SYSTEM) -Wa,-xexplicit';;
amd64,*,*) aspp='gcc'; asppflags='-c -DSYS_$(SYSTEM)';;
esac
cc_profile='-pg'
case "$arch,$model,$system" in
alpha,*,digital) profiling='prof';;
i386,*,linux_elf) profiling='prof';;
i386,*,gnu) profiling='prof';;
i386,*,bsd_elf) profiling='prof';;
sparc,*,solaris)
profiling='prof'
case "$nativecc" in gcc*) ;; *) cc_profile='-xpg';; esac;;
amd64,*,linux) profiling='prof';;
amd64,*,gnu) profiling='prof';;
*) profiling='noprof';;
esac
# Where is ranlib?
if sh ./searchpath ranlib; then
echo "ranlib found"
echo "RANLIB=ranlib" >> Makefile
echo "RANLIBCMD=ranlib" >> Makefile
else
echo "ranlib not used"
echo "RANLIB=ar rs" >> Makefile
echo "RANLIBCMD=" >> Makefile
fi
# Do #! scripts work?
if (SHELL=/bin/sh; export SHELL; (./sharpbang || ./sharpbang2) >/dev/null); then
echo "#! appears to work in shell scripts"
case "$host" in
*-*-sunos*|*-*-unicos*)
echo "We won't use it, though, because under SunOS and Unicos it breaks"
echo "on pathnames longer than 30 characters"
echo "SHARPBANGSCRIPTS=false" >> Makefile;;
*-*-cygwin*)
echo "We won't use it, though, because of conflicts with .exe extension"
echo "under Cygwin"
echo "SHARPBANGSCRIPTS=false" >> Makefile;;
*)
echo "SHARPBANGSCRIPTS=true" >> Makefile;;
esac
else
echo "No support for #! in shell scripts"
echo "SHARPBANGSCRIPTS=false" >> Makefile
fi
# Write the OS type (Unix or Cygwin)
echo "#define OCAML_OS_TYPE \"$ostype\"" >> s.h
echo "#define OCAML_STDLIB_DIR \"$libdir\"" >> s.h
# Use 64-bit file offset if possible
bytecccompopts="$bytecccompopts -D_FILE_OFFSET_BITS=64"
nativecccompopts="$nativecccompopts -D_FILE_OFFSET_BITS=64"
# Check the semantics of signal handlers
if sh ./hasgot sigaction sigprocmask; then
echo "POSIX signal handling found."
echo "#define POSIX_SIGNALS" >> s.h
else
if sh ./runtest signals.c; then
echo "Signals have the BSD semantics."
echo "#define BSD_SIGNALS" >> s.h
else
echo "Signals have the System V semantics."
fi
if sh ./hasgot sigsetmask; then
echo "sigsetmask() found"
echo "#define HAS_SIGSETMASK" >> s.h
fi
fi
# For the sys module
if sh ./hasgot getrusage; then
echo "getrusage() found."
echo "#define HAS_GETRUSAGE" >> s.h
fi
if sh ./hasgot times; then
echo "times() found."
echo "#define HAS_TIMES" >> s.h
fi
# For the terminfo module
if test "$withcurses" = "yes"; then
for libs in "" "-lcurses" "-ltermcap" "-lcurses -ltermcap" "-lncurses"; do
if sh ./hasgot $libs tgetent tgetstr tgetnum tputs; then
echo "termcap functions found (with libraries '$libs')"
echo "#define HAS_TERMCAP" >> s.h
curseslibs="${libs}"
break
fi
done
fi
# Configuration for the libraries
otherlibraries="unix str num dynlink bigarray"
# For the Unix library
has_sockets=no
if sh ./hasgot socket socketpair bind listen accept connect; then
echo "You have BSD sockets."
echo "#define HAS_SOCKETS" >> s.h
has_sockets=yes
elif sh ./hasgot -lnsl -lsocket socket socketpair bind listen accept connect; then
echo "You have BSD sockets (with libraries '-lnsl -lsocket')"
cclibs="$cclibs -lnsl -lsocket"
echo "#define HAS_SOCKETS" >> s.h
has_sockets=yes
fi
if sh ./hasgot -i sys/socket.h -t socklen_t; then
echo "socklen_t is defined in <sys/socket.h>"
echo "#define HAS_SOCKLEN_T" >> s.h
fi
if sh ./hasgot inet_aton; then
echo "inet_aton() found."
echo "#define HAS_INET_ATON" >> s.h
fi
if sh ./hasgot -i sys/types.h -i sys/socket.h -i netinet/in.h \
-t 'struct sockaddr_in6' \
&& sh ./hasgot getaddrinfo getnameinfo inet_pton inet_ntop; then
echo "IPv6 is supported."
echo "#define HAS_IPV6" >> s.h
fi
if sh ./hasgot -i unistd.h; then
echo "unistd.h found."
echo "#define HAS_UNISTD" >> s.h
fi
if sh ./hasgot -i sys/types.h -t off_t; then
echo "off_t is defined in <sys/types.h>"
echo "#define HAS_OFF_T" >> s.h
fi
if sh ./hasgot -i sys/types.h -i dirent.h; then
echo "dirent.h found."
echo "#define HAS_DIRENT" >> s.h
fi
if sh ./hasgot rewinddir; then
echo "rewinddir() found."
echo "#define HAS_REWINDDIR" >> s.h
fi
if sh ./hasgot lockf; then
echo "lockf() found."
echo "#define HAS_LOCKF" >> s.h
fi
if sh ./hasgot mkfifo; then
echo "mkfifo() found."
echo "#define HAS_MKFIFO" >> s.h
fi
if sh ./hasgot getcwd; then
echo "getcwd() found."
echo "#define HAS_GETCWD" >> s.h
fi
if sh ./hasgot getwd; then
echo "getwd() found."
echo "#define HAS_GETWD" >> s.h
fi
if sh ./hasgot getpriority setpriority; then
echo "getpriority() found."
echo "#define HAS_GETPRIORITY" >> s.h
fi
if sh ./hasgot -i sys/types.h -i utime.h && sh ./hasgot utime; then
echo "utime() found."
echo "#define HAS_UTIME" >> s.h
fi
if sh ./hasgot utimes; then
echo "utimes() found."
echo "#define HAS_UTIMES" >> s.h
fi
if sh ./hasgot dup2; then
echo "dup2() found."
echo "#define HAS_DUP2" >> s.h
fi
if sh ./hasgot fchmod fchown; then
echo "fchmod() found."
echo "#define HAS_FCHMOD" >> s.h
fi
if sh ./hasgot truncate ftruncate; then
echo "truncate() found."
echo "#define HAS_TRUNCATE" >> s.h
fi
select_include=''
if sh ./hasgot -i sys/types.h -i sys/select.h; then
echo "sys/select.h found."
echo "#define HAS_SYS_SELECT_H" >> s.h
select_include='-i sys/select.h'
fi
has_select=no
if sh ./hasgot select && \
sh ./hasgot -i sys/types.h $select_include -t fd_set ; then
echo "select() found."
echo "#define HAS_SELECT" >> s.h
has_select=yes
fi
if sh ./hasgot symlink readlink lstat; then
echo "symlink() found."
echo "#define HAS_SYMLINK" >> s.h
fi
has_wait=no
if sh ./hasgot waitpid; then
echo "waitpid() found."
echo "#define HAS_WAITPID" >> s.h
has_wait=yes
fi
if sh ./hasgot wait4; then
echo "wait4() found."
echo "#define HAS_WAIT4" >> s.h
has_wait=yes
fi
if sh ./hasgot -i limits.h && sh ./runtest getgroups.c; then
echo "getgroups() found."
echo "#define HAS_GETGROUPS" >> s.h
fi
if sh ./hasgot -i termios.h &&
sh ./hasgot tcgetattr tcsetattr tcsendbreak tcflush tcflow; then
echo "POSIX termios found."
echo "#define HAS_TERMIOS" >> s.h
fi
# Async I/O under OSF1 3.x are so buggy that the test program hangs...
testasyncio=true
if test -f /usr/bin/uname; then
case "`/usr/bin/uname -s -r`" in
"OSF1 V3."*) testasyncio=false;;
esac
fi
if $testasyncio && sh ./runtest async_io.c; then
echo "Asynchronous I/O are supported."
echo "#define HAS_ASYNC_IO" >> s.h
fi
has_setitimer=no
if sh ./hasgot setitimer; then
echo "setitimer() found."
echo "#define HAS_SETITIMER" >> s.h
has_setitimer="yes"
fi
if sh ./hasgot gethostname; then
echo "gethostname() found."
echo "#define HAS_GETHOSTNAME" >> s.h
fi
if sh ./hasgot -i sys/utsname.h && sh ./hasgot uname; then
echo "uname() found."
echo "#define HAS_UNAME" >> s.h
fi
has_gettimeofday=no
if sh ./hasgot gettimeofday; then
echo "gettimeofday() found."
echo "#define HAS_GETTIMEOFDAY" >> s.h
has_gettimeofday="yes"
fi
if sh ./hasgot mktime; then
echo "mktime() found."
echo "#define HAS_MKTIME" >> s.h
fi
case "$host" in
*-*-cygwin*) ;; # setsid emulation under Cygwin breaks the debugger
*) if sh ./hasgot setsid; then
echo "setsid() found."
echo "#define HAS_SETSID" >> s.h
fi;;
esac
if sh ./hasgot putenv; then
echo "putenv() found."
echo "#define HAS_PUTENV" >> s.h
fi
if sh ./hasgot -i locale.h && sh ./hasgot setlocale; then
echo "setlocale() and <locale.h> found."
echo "#define HAS_LOCALE" >> s.h
fi
if sh ./hasgot -i mach-o/dyld.h && sh ./hasgot NSLinkModule; then
echo "NSLinkModule() found. Using darwin dynamic loading."
echo "#define HAS_NSLINKMODULE" >> s.h
elif sh ./hasgot $dllib dlopen; then
echo "dlopen() found."
elif sh ./hasgot $dllib -ldl dlopen; then
echo "dlopen() found in -ldl."
dllib="$dllib -ldl"
else
shared_libraries_supported=no
fi
if $shared_libraries_supported; then
echo "Dynamic loading of shared libraries is supported."
echo "#define SUPPORT_DYNAMIC_LINKING" >> s.h
if $dl_needs_underscore; then
echo '#define DL_NEEDS_UNDERSCORE' >>s.h
fi
fi
if sh ./hasgot -i sys/types.h -i sys/mman.h && sh ./hasgot mmap munmap; then
echo "mmap() found."
echo "#define HAS_MMAP" >> s.h
fi
nargs=none
for i in 5 6; do
if sh ./trycompile -DNUM_ARGS=${i} gethostbyname.c; then nargs=$i; break; fi
done
if test $nargs != "none"; then
echo "gethostbyname_r() found (with ${nargs} arguments)."
echo "#define HAS_GETHOSTBYNAME_R $nargs" >> s.h
fi
nargs=none
for i in 7 8; do
if sh ./trycompile -DNUM_ARGS=${i} gethostbyaddr.c; then nargs=$i; break; fi
done
if test $nargs != "none"; then
echo "gethostbyaddr_r() found (with ${nargs} arguments)."
echo "#define HAS_GETHOSTBYADDR_R $nargs" >> s.h
fi
# Determine if the debugger is supported
if test "$has_sockets" = "yes"; then
echo "Replay debugger supported."
debugger="ocamldebugger"
else
echo "No replay debugger (missing system calls)"
debugger=""
fi
# Determine if system stack overflows can be detected
case "$arch,$system" in
i386,linux_elf|amd64,linux)
echo "System stack overflow can be detected."
echo "#define HAS_STACK_OVERFLOW_DETECTION" >> s.h;;
*)
echo "Cannot detect system stack overflow.";;
esac
# Determine the target architecture for the "num" library
case "$host" in
alpha*-*-*) bng_arch=alpha; bng_asm_level=1;;
i[3456]86-*-*) bng_arch=ia32
if sh ./trycompile ia32sse2.c
then bng_asm_level=2
else bng_asm_level=1
fi;;
mips-*-*) bng_arch=mips; bng_asm_level=1;;
powerpc-*-*) bng_arch=ppc; bng_asm_level=1;;
sparc*-*-*) bng_arch=sparc; bng_asm_level=1;;
x86_64-*-*) bng_arch=amd64; bng_asm_level=1;;
*) bng_arch=generic; bng_asm_level=0;;
esac
echo "BNG_ARCH=$bng_arch" >> Makefile
echo "BNG_ASM_LEVEL=$bng_asm_level" >> Makefile
# Determine if the POSIX threads library is supported
systhread_support=false
if test "$pthread_wanted" = "yes"; then
case "$host" in
*-*-solaris*) pthread_link="-lpthread -lposix4";;
*-*-freebsd*) pthread_link="-pthread";;
*-*-openbsd*) pthread_link="-pthread";;
*) pthread_link="-lpthread";;
esac
if ./hasgot -i pthread.h $pthread_link pthread_self; then
echo "POSIX threads library supported."
systhread_support=true
otherlibraries="$otherlibraries systhreads"
bytecccompopts="$bytecccompopts -D_REENTRANT"
nativecccompopts="$nativecccompopts -D_REENTRANT"
case "$host" in
*-*-freebsd*)
bytecccompopts="$bytecccompopts -D_THREAD_SAFE"
nativecccompopts="$nativecccompopts -D_THREAD_SAFE";;
*-*-openbsd*)
bytecccompopts="$bytecccompopts -pthread"
asppflags="$asppflags -pthread"
nativecccompopts="$nativecccompopts -pthread";;
esac
echo "Options for linking with POSIX threads: $pthread_link"
echo "PTHREAD_LINK=$pthread_link" >> Makefile
if sh ./hasgot $pthread_link sigwait; then
echo "sigwait() found"
echo "#define HAS_SIGWAIT" >> s.h
fi
else
echo "POSIX threads not found."
pthread_link=""
fi
fi
# Determine if the bytecode thread library is supported
if test "$has_select" = "yes" \
&& test "$has_setitimer" = "yes" \
&& test "$has_gettimeofday" = "yes" \
&& test "$has_wait" = "yes"; then
echo "Bytecode threads library supported."
otherlibraries="$otherlibraries threads"
else
echo "Bytecode threads library not supported (missing system calls)"
fi
# Determine the location of X include files and libraries
x11_include="not found"
x11_link="not found"
for dir in \
$x11_include_dir \
\
/usr/X11R6/include \
/usr/include/X11R6 \
/usr/local/X11R6/include \
/usr/local/include/X11R6 \
/opt/X11R6/include \
\
/usr/X11/include \
/usr/include/X11 \
/usr/local/X11/include \
/usr/local/include/X11 \
/opt/X11/include \
\
/usr/X11R5/include \
/usr/include/X11R5 \
/usr/local/X11R5/include \
/usr/local/include/X11R5 \
/usr/local/x11r5/include \
/opt/X11R5/include \
\
/usr/X11R4/include \
/usr/include/X11R4 \
/usr/local/X11R4/include \
/usr/local/include/X11R4 \
\
/usr/X386/include \
/usr/x386/include \
/usr/XFree86/include/X11 \
\
/usr/include \
/usr/local/include \
/usr/unsupported/include \
/usr/athena/include \
/usr/lpp/Xamples/include \
\
/usr/openwin/include \
/usr/openwin/share/include \
; \
do
if test -f $dir/X11/X.h; then
x11_include=$dir
break
fi
done
if test "$x11_include" = "not found"; then
x11_try_lib_dir=''
else
x11_try_lib_dir=`echo $x11_include | sed -e 's|include|lib|'`
fi
for dir in \
$x11_lib_dir \
$x11_try_lib_dir \
\
/usr/X11R6/lib64 \
/usr/X11R6/lib \
/usr/lib/X11R6 \
/usr/local/X11R6/lib \
/usr/local/lib/X11R6 \
/opt/X11R6/lib \
\
/usr/X11/lib \
/usr/lib/X11 \
/usr/local/X11/lib \
/usr/local/lib/X11 \
/opt/X11/lib \
\
/usr/X11R5/lib \
/usr/lib/X11R5 \
/usr/local/X11R5/lib \
/usr/local/lib/X11R5 \
/usr/local/x11r5/lib \
/opt/X11R5/lib \
\
/usr/X11R4/lib \
/usr/lib/X11R4 \
/usr/local/X11R4/lib \
/usr/local/lib/X11R4 \
\
/usr/X386/lib \
/usr/x386/lib \
/usr/XFree86/lib/X11 \
\
/usr/lib \
/usr/local/lib \
/usr/unsupported/lib \
/usr/athena/lib \
/usr/lpp/Xamples/lib \
/lib/usr/lib/X11 \
\
/usr/openwin/lib \
/usr/openwin/share/lib \
; \
do
if test -f $dir/libX11.a || \
test -f $dir/libX11.so || \
test -f $dir/libX11.dll.a || \
test -f $dir/libX11.sa; then
if test $dir = /usr/lib; then
x11_link="-lX11"
else
x11_link="-L$dir -lX11"
x11_libs="-L$dir"
fi
break
fi
done
if test "$x11_include" = "not found" || test "$x11_link" = "not found"
then
echo "X11 not found, the \"graph\" library will not be supported."
x11_include=""
else
echo "Location of X11 include files: $x11_include/X11"
echo "Options for linking with X11: $x11_link"
otherlibraries="$otherlibraries graph"
if test "$x11_include" = "/usr/include"; then
x11_include=""
else
x11_include="-I$x11_include"
fi
echo "X11_INCLUDES=$x11_include" >> Makefile
echo "X11_LINK=$x11_link" >> Makefile
fi
# See if we can compile the dbm library
dbm_include="not found"
dbm_link="not found"
use_gdbm_ndbm=no
for dir in /usr/include /usr/include/db1 /usr/include/gdbm; do
if test -f $dir/ndbm.h; then
dbm_include=$dir
if sh ./hasgot dbm_open; then
dbm_link=""
elif sh ./hasgot -lndbm dbm_open; then
dbm_link="-lndbm"
elif sh ./hasgot -ldb1 dbm_open; then
dbm_link="-ldb1"
elif sh ./hasgot -lgdbm dbm_open; then
dbm_link="-lgdbm"
elif sh ./hasgot -lgdbm_compat -lgdbm dbm_open; then
dbm_link="-lgdbm_compat -lgdbm"
fi
break
fi
if test -f $dir/gdbm-ndbm.h; then
dbm_include=$dir
use_gdbm_ndbm=yes
if sh ./hasgot -lgdbm_compat -lgdbm dbm_open; then
dbm_link="-lgdbm_compat -lgdbm"
fi
break
fi
done
if test "$dbm_include" = "not found" || test "$dbm_link" = "not found"; then
echo "NDBM not found, the \"dbm\" library will not be supported."
else
echo "NDBM found (in $dbm_include)"
if test "$dbm_include" = "/usr/include"; then
dbm_include=""
else
dbm_include="-I$dbm_include"
fi
echo "DBM_INCLUDES=$dbm_include" >> Makefile
echo "DBM_LINK=$dbm_link" >> Makefile
if test "$use_gdbm_ndbm" = "yes"; then
echo "#define DBM_USES_GDBM_NDBM" >> s.h
fi
otherlibraries="$otherlibraries dbm"
fi
# Look for tcl/tk
echo "Configuring LablTk..."
if test $tk_wanted = no; then
has_tk=false
elif test $tk_x11 = no; then
has_tk=true
elif test "$x11_include" = "not found" || test "$x11_link" = "not found"; then
echo "X11 not found."
has_tk=false
else
tk_x11_include="$x11_include"
tk_x11_libs="$x11_libs -lX11"
has_tk=true
fi
if test $has_tk = true; then
tcl_version=''
tcl_version=`sh ./runtest $tk_defs $tk_x11_include tclversion.c`
for tk_incs in \
"-I/usr/local/include" \
"-I/usr/local/include/tcl8.4 -I/usr/local/include/tk8.4" \
"-I/usr/include/tcl8.4 -I/usr/include/tk8.4" \
"-I/usr/local/include/tcl8.3 -I/usr/local/include/tk8.3" \
"-I/usr/include/tcl8.3 -I/usr/include/tk8.3" \
"-I/usr/local/include/tcl8.2 -I/usr/local/include/tk8.2" \
"-I/usr/include/tcl8.2 -I/usr/include/tk8.2" \
"-I/sw/include"
do if test -z "$tcl_version"; then
tk_defs="$tk_incs"
tcl_version=`sh ./runtest $tk_defs $tk_x11_include tclversion.c`
fi; done
if test -n "$tcl_version" && test "x$tcl_version" != "xnone"; then
echo "tcl.h and tk.h version $tcl_version found with \"$tk_defs\"."
case $tcl_version in
7.5) tclmaj=7 tclmin=5 tkmaj=4 tkmin=1 ;;
7.6) tclmaj=7 tclmin=6 tkmaj=4 tkmin=2 ;;
8.0) tclmaj=8 tclmin=0 tkmaj=8 tkmin=0 ;;
8.1) tclmaj=8 tclmin=1 tkmaj=8 tkmin=1 ;;
8.2) tclmaj=8 tclmin=2 tkmaj=8 tkmin=2 ;;
8.3) tclmaj=8 tclmin=3 tkmaj=8 tkmin=3 ;;
8.4) tclmaj=8 tclmin=4 tkmaj=8 tkmin=4 ;;
*) echo "This version is not known."; has_tk=false ;;
esac
else
echo "tcl.h and/or tk.h not found."
has_tk=false
fi
fi
tkauxlibs="$mathlib $dllib"
tcllib=''
tklib=''
if test $has_tk = true; then
if test -n "$tk_libs" && \
sh ./hasgot $tk_libs $tk_x11_libs $tkauxlibs Tcl_DoOneEvent
then tk_libs="$tk_libs $dllib"
elif sh ./hasgot $tk_libs -ltcl$tclmaj.$tclmin $tkauxlibs Tcl_DoOneEvent
then
tk_libs="$tk_libs -ltk$tkmaj.$tkmin -ltcl$tclmaj.$tclmin $dllib"
elif sh ./hasgot $tk_libs -ltcl$tclmaj$tclmin $tkauxlibs Tcl_DoOneEvent
then
tk_libs="$tk_libs -ltk$tkmaj$tkmin -ltcl$tclmaj$tclmin $dllib"
elif test -z "$tk_libs" && tk_libs=-L/usr/local/lib && \
sh ./hasgot $tk_libs -ltcl$tclmaj.$tclmin $tkauxlibs Tcl_DoOneEvent
then
tk_libs="$tk_libs -ltk$tkmaj.$tkmin -ltcl$tclmaj.$tclmin $dllib"
elif sh ./hasgot $tk_libs -ltcl$tclmaj$tclmin $tkauxlibs Tcl_DoOneEvent
then
tk_libs="$tk_libs -ltk$tkmaj$tkmin -ltcl$tclmaj$tclmin $dllib"
elif sh ./hasgot -L/sw/lib $tk_libs -ltcl$tclmaj.$tclmin $tkauxlibs \
Tcl_DoOneEvent
then tk_libs="-L/sw/lib -ltk$tkmaj.$tkmin -ltcl$tclmaj.$tclmin $dllib"
else
echo "Tcl library not found."
has_tk=false
fi
fi
if test $has_tk = true; then
if sh ./hasgot $tk_libs $tk_x11_libs $tkauxlibs Tk_SetGrid; then
echo "Tcl/Tk libraries found."
elif sh ./hasgot -L/sw/lib $tk_libs $tk_x11_libs $tkauxlibs Tk_SetGrid; then
tk_libs="-L/sw/lib $tk_libs"
echo "Tcl/Tk libraries found."
else
echo "Tcl library found."
echo "Tk library not found."
has_tk=false
fi
fi
if test $has_tk = true; then
if test $tk_x11 = yes; then
echo "TK_DEFS=$tk_defs "'$(X11_INCLUDES)' >> Makefile
echo "TK_LINK=$tk_libs "'$(X11_LINK)' >> Makefile
else
echo "TK_DEFS=$tk_defs" >> Makefile
echo "TK_LINK=$tk_libs" >> Makefile
fi
otherlibraries="$otherlibraries labltk"
else
echo "Configuration failed, LablTk will not be built."
fi
# Begin Camlp4
(
cd ../../camlp4/config
EXE=$exe ./configure_batch -prefix "$prefix" -bindir "$bindir" -libdir "$libdir" -mandir "$mandir" -ocaml-top ../.. > /dev/null
)
case $? in
0) echo "Camlp4 correctly configured.";;
*) echo "Warning: Camlp4 configuration terminated with error code $?";;
esac
# End Camlp4
# Final twiddling of compiler options to work around known bugs
nativeccprofopts="$nativecccompopts"
case "$buggycc" in
gcc.2.96)
bytecccompopts="$bytecccompopts -fomit-frame-pointer"
nativecccompopts="$nativecccompopts -fomit-frame-pointer";;
esac
# Finish generated files
cclibs="$cclibs $mathlib"
echo "BYTECC=$bytecc" >> Makefile
echo "BYTECCCOMPOPTS=$bytecccompopts" >> Makefile
echo "BYTECCLINKOPTS=$bytecclinkopts" >> Makefile
echo "BYTECCLIBS=$cclibs $dllib $curseslibs $pthread_link" >> Makefile
echo "BYTECCRPATH=$byteccrpath" >> Makefile
echo "EXE=$exe" >> Makefile
echo "SUPPORTS_SHARED_LIBRARIES=$shared_libraries_supported" >> Makefile
echo "SHAREDCCCOMPOPTS=$sharedcccompopts" >> Makefile
echo "MKSHAREDLIB=$mksharedlib" >> Makefile
echo "MKSHAREDLIBRPATH=$mksharedlibrpath" >> Makefile
echo "ARCH=$arch" >> Makefile
echo "MODEL=$model" >> Makefile
echo "SYSTEM=$system" >> Makefile
echo "NATIVECC=$nativecc" >> Makefile
echo "NATIVECCCOMPOPTS=$nativecccompopts" >> Makefile
echo "NATIVECCPROFOPTS=$nativeccprofopts" >> Makefile
echo "NATIVECCLINKOPTS=$nativecclinkopts" >> Makefile
echo "NATIVECCRPATH=$nativeccrpath" >> Makefile
echo "NATIVECCLIBS=$cclibs $dllib" >> Makefile
echo "ASFLAGS=$asflags" >> Makefile
echo "ASPP=$aspp" >> Makefile
echo "ASPPFLAGS=$asppflags" >> Makefile
echo "ASPPPROFFLAGS=$asppprofflags" >> Makefile
echo "PROFILING=$profiling" >> Makefile
echo "DYNLINKOPTS=$dllib" >> Makefile
echo "OTHERLIBRARIES=$otherlibraries" >> Makefile
echo "DEBUGGER=$debugger" >> Makefile
echo "CC_PROFILE=$cc_profile" >> Makefile
echo "SYSTHREAD_SUPPORT=$systhread_support" >>Makefile
rm -f tst hasgot.c
rm -f ../m.h ../s.h ../Makefile
mv m.h s.h Makefile ..
# Print a summary
echo
echo "** Configuration summary **"
echo
echo "Directories where Objective Caml will be installed:"
echo " binaries.................. $bindir"
echo " standard library.......... $libdir"
echo " manual pages.............. $mandir (with extension .$manext)"
echo "Configuration for the bytecode compiler:"
echo " C compiler used........... $bytecc"
echo " options for compiling..... $bytecccompopts"
echo " options for linking....... $bytecclinkopts $cclibs $dllib $curseslibs $pthread_link"
if $shared_libraries_supported; then
echo " shared libraries are supported"
echo " options for compiling..... $sharedcccompopts $bytecccompopts"
echo " command for building...... $mksharedlib lib.so $mksharedlibrpath/a/path objs"
else
echo " shared libraries not supported"
fi
echo "Configuration for the native-code compiler:"
if test "$arch" = "none"; then
echo " (not supported on this platform)"
else
if test "$model" = "default"; then
echo " hardware architecture..... $arch"
else
echo " hardware architecture..... $arch ($model)"
fi
if test "$system" = "unknown"; then : ; else
echo " OS variant................ $system"
fi
echo " C compiler used........... $nativecc"
echo " options for compiling..... $nativecccompopts"
echo " options for linking....... $nativecclinkopts $cclibs"
echo " assembler ................ \$(AS) $asflags"
echo " preprocessed assembler ... $aspp $asppflags"
if test "$profiling" = "prof"; then
echo " profiling with gprof ..... supported"
else
echo " profiling with gprof ..... not supported"
fi
fi
if test "$debugger" = "ocamldebugger"; then
echo "Source-level replay debugger: supported"
else
echo "Source-level replay debugger: not supported"
fi
echo "Additional libraries supported:"
echo " $otherlibraries"
echo "Configuration for the \"num\" library:"
echo " target architecture ...... $bng_arch (asm level $bng_asm_level)"
if test "$x11_include" != "not found" && test "$x11_lib" != "not found"; then
echo "Configuration for the \"graph\" library:"
echo " options for compiling .... $x11_include"
echo " options for linking ...... $x11_link"
fi
if test $has_tk = true; then
echo "Configuration for the \"labltk\" library:"
echo " use tcl/tk version ....... $tcl_version"
echo " options for compiling .... $tk_defs"
echo " options for linking ...... $tk_libs"
else
echo "The \"labltk\" library: not supported"
fi
echo
echo "** Objective Caml configuration completed successfully **"
echo
