To reference or cite the objects present in the Software Heritage archive, permalinks based on SoftWare Heritage persistent IDentifiers (SWHIDs) must be used instead of copying and pasting the url from the address bar of the browser (as there is no guarantee the current URI scheme will remain the same over time).
Select below a type of object currently browsed in order to display its associated SWHID and permalink.
Further work in converting tracer code to C++
CitcomS NEWS -- history of user-visible changes. 2009-05-10 Please send CitcomS.py bug reports to firstname.lastname@example.org. Version 3.1.0 * Converting temperature and composition to seismic velocities. The seismic velocities output can be uploaded to CIG seismic portal for SPECFEM3D simulation to generate synthetic seismograms. See Cookbook 10 in the manual. * Allowing tracers in global model with nproc > 2 by changing the mesh slightly. * The convergence of Stokes solver is controlled by parameter "accuracy" in [CitcomS.solver.vsolver]. "tole_compressibility" is not used anymore. Also, the norms of div(u), u, and p are no longer dependent on the grid size. * Adding self-gravitational effect on geoid, contributed by Shijie Zhong. See Cookbook 8 in the manual. * Adding Consistent-Boundary-Flux (CBF) method to compute dynamic topography, contributed by Shijie Zhong. See Cookbook 8 in the manual. * Better convergence for the nested solver calculation. See Cookbook 9 in the manual. * Adding GMT/netcdf grd input for surface velocity boundary conditions, initial temperature, material dependence and local Rayleigh number in surface layers, contributed by Thorsten Becker. * Adding capability to read in time- and geographic-dependent, top surface temperature boundary conditions, contributed by Mike Gurnis. * Allowing multi-component chemical viscosity. * Optimizing the speed. Cookbook 8 becomes 13% faster than v3.0.3. * Moving input parameter "mantle_temp" from [CitcomS.solver.param] to [CitcomS.solver.ic] section. * visual/project_geoid starts from degree-2 spherical harmonics. * Fixed several bugs in the code and manual. Important bug fix includes: - A memory bug in visual/project_geoid.c, fixed by Thorsten Becker. - Initial temperature "tic_method=0" for regional model applied sinusoidal perturbations to 0th processor only. - Initial temperature "tic_method=1" for regional model generated a top thermal boundary layer 25x older than specfied by "half_space_age". - Compiling with both HDF5 and Exchanger support will crash Cookbook 9 (Issue 528). - Insufficient error checking when reading input files (Issue 265, reported by Clint Conrad). - Installation bug: Python.h and system header not properly checked by configure script (Isse 45, reported by Vlad Manea and Ricardo Arevalo). - Manual fixes: description of rheol=4 (Isse 152, reported by James Robert), energy equation (Issue 162 & 164, reported by Dan Bower), documented all "tic_method" and "rheol" options. Version 3.0.3 * Fixed issue 158: incorrect E->control.fi_max with coor=1. In regional model, when coor=1 is used and nodex is not equal to nodey, the maximum value of phi coordinate is set incorrectly. These parts of the code are affected: - the initial temperature of regional model with tic_method 0 or 2. - the tracer module of regional model. - the lith_age module of regional model. * Fixed a bug in geoid when nprocz>1. The geoid contribution due to topography would contain artitrary result if more than one processor in z direction is used. * Fixed a dead-lock problem in full-regional coupling model. * visual/project_geoid.c: Fixed a typo in memory allocation that led to core dump. Changed the order of input arguments to match the manual. * Closed *.tracer_log.* files before the program exits. More details can be found in CIG Issue Tracker (http://geodynamics.org/roundup/issues/). Version 3.0.2 * Fixed a bug in HDF5 output which causes compilation error (Issue 131); * Fixed a bug in normalizing the tracer coordinate (Issue 139); * Fixed a behavior regression when using lith_age=1 and tic_method=-1; * Greatly reduced the number of tracers per elemente that is required for thermo-chemical convection (Issue 140). More details can be found in CIG Issue Tracker (http://geodynamics.org/roundup/issues/). Version 3.0.1 * A header file for the exchanger was missing in v3.0.0. Version 3.0.0 This release of CitcomS (3.0) contains many new features, including: * two implementations of compressible convection, one by Wei Leng and Shijie Zhong and the other by Eh Tan (Cookbook 8); * the ability to resume computation from previous checkpoints (Cookbook 8); * multi-component chemical convection; * a fixed non-Newtonian solver; * an exchanger package for solver coupling (Cookbook 9); * removing the rigid body rotation component from the velocity by Shijie Zhong (Cookbook 8); * an option to disable monitoring of maximum temperature (Cookbook 9); * a rheology option for pseudo-plasiticity, composition dependent viscosity and heat generation, compressed ASCII output, and an easier way for mesh refinement for the radial coordinate by Thorsten Becker. There are additional seven backward-incompatible changes. Among them, the first four will affect the results. The same input file will produce slightly different results in v3.0.0 than in v2.2.2. * the viscosity field at element level is not smoothed (this might slow down the convergence but will represent the viscosity field more accurately); * the Lenardic filter on temperature is disabled by default; * the rigid body rotation component is removed from the velocity by default; * use of a better pseudo-random number generator to generate the initial tracer; * the type of input parameter coor is changed from a boolean to an integer; * setting restart=on will resume the computation from the checkpoint files and will not need the tracer files (the old way of reading initial temperature from velo files can be achieved by tic_method=-1); * the input parameter reset_initial_composition becomes obsolete. Version 2.2.2 * A bug in geoid calculation is fixed. The buoyancy contribution on geoid was not correctly zeroed before every geoid calculation. This caused the geoid at former timestep accumulated over the later timestep. (Issue 114) * The pressure, stress, and composition output, if enabled, will be combined by "autocombine.py" script as well. The combined output is stored in opt-files, similar to the cap-files. (Issue 99) * Generating random tracers is sped up. This should avoid a potential problem of "too many tries?" error when the domain size of a processor is much smaller (<1%) than the size of the whole sphere. Version 2.2.1 * One example, Cookbook7, was missing in v2.2.0. Version 2.2.0 * A new feature to track particles in the flow (code donated by Allen McNamara and Shijie Zhong). * A new feature to use the tracers to compute composition field and compute thermo-chemical convection (code donated by Allen McNamara and Shijie Zhong). A new cookcook (Cookbook7) in the manual introduces how to use this feature. * New feature to use the tracers to define the low viscosity wedges/channels in the subduction zones (code donated by Vlad Manea). * Fixes of sevearal bugs: issue 72, 73, 75, 77 and 81. See the Geodynamics Roundup issue tracker (http://geodynamics.org/roundup) and the file ChangeLog for details. Important bug fixes include: - 'make install' broken for non-pyred CitcomS. (Issue 72) - 'autocombine.py' did not work in Ubuntu 6.10. (Issue 73) - Velocity b.c not scaled correctly when age becomes negative. When using file_vbcs=on and the age becomes negative (passing the present time), the read-in velocity BC was not scaled properly. Usually the boundary velocity became ~1000x smaller than it should be. (Issue 77) - Errors in the manual. The manual failed to document the unit of the vbc_file is in cm/yr. The manual contained a small error in the description of the header of the coor_file. (Issue 75 and 81) Version 2.1.0 * The filenames of post-processed and combined data are changed slightly. For example, "model.cap0.100" is renamed to "model.cap00.100", "model.cap6.100" is renamed to "model.cap06.100", and "model.cap11.100" is unchanged. * A new input parameter "datadir" specifies the path of output files. The "datafile" input parameter (cannot contain path) specifies the filename prefix of the output files. In v2.0.x and before, "datafile" is used to specify the path and filename prefix of output files. This change is not backward compatible. Users need to change their old input file to run it. * Improved build procedure. The CitComS executable embeds python interpreter by default and is statically linked with MPI library, which improves the portability of the code. * New input format (INI-styled .cfg) * No need to specify launcher.nodes anymore, it is calculated from the mesher properties. * Support of binary format output (using HDF5 library). * Additional data output (including: geoid, stress, pressure, and horizontal average) can be enabled/disabled by changing the input parameters. * Scripts (using GMT commands) to plot 2-D cross sections of temperature field. * Added/removed a few input parameters (all in solver.const component) for computing geoid. Removed "layerd" and "wdensity" and added "radius", "density_above" and "density_below". * Fixes for several bugs: issue 30, 35, 42, 44 and 55. See the Geodynamics Roundup issue tracker (http://geodynamics.org/roundup) and the file ChangeLog for details. Important bug fixes include: - Inconsistent times in C and Pyre. When 'fixed_timestep' is set and the grid resolution is insufficient, the Pyre part of CitComS could give the wrong model time. (Issue 35) - Accidental deletion of surf files by batchsurf.py. batchsurf.py is a script to combine the surf files. If the current working directory happens to be the output directory of CitcomS, the script would delete the original surf files. (Issue 55) Version 2.0.2 * Fixes for several minor bugs: issues 7, 8, 9, 10, 11, 12, and 13. Most of these are installation-related. See the Geodynamics Roundup issue tracker (http://geodynamics.org/roundup) and the file ChangeLog for details. Version 2.0.1 * CitComS.py is now distributed under the GNU General Public License. See the file COPYING for copying conditions. * CitComS.py now uses the GNU Build System (Autoconf, Automake, and Libtool). See the file INSTALL for building and installation instructions. Local variables: version-control: never mode: indented-text end: