Skip to main content

Browse the archive

https://github.com/tendermint/tendermint
05 April 2024, 22:58:32 UTC
sort by:
Revision Author Date Message Commit Date
eb0d2f0 Thane Thomson 18 December 2022, 14:18:31 UTC Rename to "Data Companion Push API" Signed-off-by: Thane Thomson <connect@thanethomson.com> 18 December 2022, 14:18:31 UTC
763ab86 Thane Thomson 26 November 2022, 14:31:08 UTC Apply suggestions from code review Signed-off-by: Thane Thomson <connect@thanethomson.com> 26 November 2022, 14:31:34 UTC
008b137 Thane Thomson 26 November 2022, 14:30:45 UTC Add ADR-082 to ADR index as proposed Signed-off-by: Thane Thomson <connect@thanethomson.com> 26 November 2022, 14:31:34 UTC
01c6d0c Thane Thomson 15 September 2022, 23:05:46 UTC Add "Follow-Up Work" section Signed-off-by: Thane Thomson <connect@thanethomson.com> 26 November 2022, 14:31:33 UTC
13ccad9 Thane Thomson 15 September 2022, 22:59:16 UTC Update "Alternative Approaches" section with more detail Signed-off-by: Thane Thomson <connect@thanethomson.com> 26 November 2022, 14:31:33 UTC
f44584e Thane Thomson 15 September 2022, 15:05:42 UTC Add more pros/cons from discussion Signed-off-by: Thane Thomson <connect@thanethomson.com> 26 November 2022, 14:31:33 UTC
f0802a5 Thane Thomson 11 September 2022, 17:11:22 UTC First draft of ADR-082 Signed-off-by: Thane Thomson <connect@thanethomson.com> 26 November 2022, 14:31:32 UTC
9d01a68 AdamKorcz 25 November 2022, 16:43:34 UTC Update oss-fuzz-build.sh (#9745) Fixes the tendermint OSS-Fuzz build by adjusting for some infra changes that were made in OSS-Fuzz. --- #### PR checklist - [ ] Tests written/updated, or no tests needed - [ ] `CHANGELOG_PENDING.md` updated, or no changelog entry needed - [ ] Updated relevant documentation (`docs/`) and code comments, or no documentation updates needed 25 November 2022, 16:43:34 UTC
8fd66a6 Jacob Gadikian 24 November 2022, 14:53:57 UTC make format (#9744) ## NOTE: this pr exclusively runs commands from the makefile found here This PR ONLY runs `make format` ... then `make mockery` Its purpose is to ensure that the review scope of other PR's, which changed .go files and thus triggered the linter that only runs conditionally, have smaller review scopes, and should be merged before: https://github.com/tendermint/tendermint/pull/9738 https://github.com/tendermint/tendermint/pull/9739 https://github.com/tendermint/tendermint/pull/9742 --- #### PR checklist - [x] Tests written/updated, or no tests needed - [x] `CHANGELOG_PENDING.md` updated, or no changelog entry needed - [x] Updated relevant documentation (`docs/`) and code comments, or no documentation updates needed 24 November 2022, 14:53:57 UTC
f7bb065 Jacob Gadikian 24 November 2022, 14:30:40 UTC p2p: fix logspam (#9756) Since starting off as a wee validator, I've been mystified by the volume of p2p logspam, which often makes it impossible to monitor other tasks. Thus, routine p2p events, have been cast into the land of debug. --- #### PR checklist - [x] Tests written/updated, or no tests needed - [x] `CHANGELOG_PENDING.md` updated, or no changelog entry needed - [x] Updated relevant documentation (`docs/`) and code comments, or no documentation updates needed 24 November 2022, 14:30:40 UTC
4af7568 JayT106 24 November 2022, 13:23:46 UTC statesync: convert apphash to hex string in log (#9591) noticed this place is still printing unreadable apphash, convert to hex string --- #### PR checklist - [ ] Tests written/updated, or no tests needed - [ ] `CHANGELOG_PENDING.md` updated, or no changelog entry needed - [ ] Updated relevant documentation (`docs/`) and code comments, or no documentation updates needed 24 November 2022, 13:23:46 UTC
3e76698 Jacob Gadikian 24 November 2022, 13:01:46 UTC Delete release_notes.md (#9753) Co-authored-by: Thane Thomson <connect@thanethomson.com> 24 November 2022, 13:01:46 UTC
2d036c5 JayT106 23 November 2022, 15:59:58 UTC cli: fix abci help (#9717) * fix abci-cli help * add test * fix script * debugging CI * revert the changes for verifying CI * update pending log Co-authored-by: Sergio Mena <sergio@informal.systems> 23 November 2022, 15:59:58 UTC
12f0c4a dependabot[bot] 22 November 2022, 18:32:31 UTC build(deps): Bump github.com/btcsuite/btcd/btcec/v2 from 2.3.1 to 2.3.2 (#9730) Bumps [github.com/btcsuite/btcd/btcec/v2](https://github.com/btcsuite/btcd) from 2.3.1 to 2.3.2. - [Release notes](https://github.com/btcsuite/btcd/releases) - [Changelog](https://github.com/btcsuite/btcd/blob/master/CHANGES) - [Commits](https://github.com/btcsuite/btcd/compare/btcec/v2.3.1...btcec/v2.3.2) --- updated-dependencies: - dependency-name: github.com/btcsuite/btcd/btcec/v2 dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> 22 November 2022, 18:32:31 UTC
7769467 dependabot[bot] 22 November 2022, 18:22:06 UTC build(deps): Bump github.com/btcsuite/btcd/btcutil from 1.1.2 to 1.1.3 (#9729) Bumps [github.com/btcsuite/btcd/btcutil](https://github.com/btcsuite/btcd) from 1.1.2 to 1.1.3. - [Release notes](https://github.com/btcsuite/btcd/releases) - [Changelog](https://github.com/btcsuite/btcd/blob/master/CHANGES) - [Commits](https://github.com/btcsuite/btcd/compare/btcutil/v1.1.2...btcutil/v1.1.3) --- updated-dependencies: - dependency-name: github.com/btcsuite/btcd/btcutil dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> 22 November 2022, 18:22:06 UTC
d16f175 dependabot[bot] 22 November 2022, 17:21:05 UTC build(deps): Bump github.com/cosmos/gogoproto from 1.4.2 to 1.4.3 (#9728) Bumps [github.com/cosmos/gogoproto](https://github.com/cosmos/gogoproto) from 1.4.2 to 1.4.3. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/cosmos/gogoproto/releases">github.com/cosmos/gogoproto's releases</a>.</em></p> <blockquote> <h2>v1.4.3</h2> <h3>Bug Fixes</h3> <ul> <li><a href="https://github-redirect.dependabot.com/cosmos/gogoproto/pull/24">#24</a> Fix <code>CompactTextString</code> panics with nested Anys and private fields.</li> <li><a href="https://github-redirect.dependabot.com/cosmos/gogoproto/pull/14">#14</a> Fix <code>make regenerate</code>.</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/cosmos/gogoproto/blob/main/CHANGELOG.md">github.com/cosmos/gogoproto's changelog</a>.</em></p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/cosmos/gogoproto/commit/1c0272593e387aeb68b5470509513a0d22a7420e"><code>1c02725</code></a> fix: fix <code>CompactTextString</code> panics with nested Anys and private fields (<a href="https://github-redirect.dependabot.com/cosmos/gogoproto/issues/24">#24</a>)</li> <li><a href="https://github.com/cosmos/gogoproto/commit/b5eb9e6f58ee8c176e79330b0ced07735130a908"><code>b5eb9e6</code></a> fix: fix <code>make regenerate</code> (<a href="https://github-redirect.dependabot.com/cosmos/gogoproto/issues/14">#14</a>)</li> <li><a href="https://github.com/cosmos/gogoproto/commit/a14993478f40695898ed8a86931094b6656e8a5d"><code>a149934</code></a> chore(deps): bump bufbuild/buf-setup-action from 1.8.0 to 1.9.0 (<a href="https://github-redirect.dependabot.com/cosmos/gogoproto/issues/23">#23</a>)</li> <li><a href="https://github.com/cosmos/gogoproto/commit/f8f123e02214c364f1464849fa1643b45e8f8928"><code>f8f123e</code></a> chore(deps): bump amannn/action-semantic-pull-request from 5.0.1 to 5.0.2 (<a href="https://github-redirect.dependabot.com/cosmos/gogoproto/issues/22">#22</a>)</li> <li><a href="https://github.com/cosmos/gogoproto/commit/6884d250505275b9b560465b9424053f7d691afc"><code>6884d25</code></a> chore(deps): bump google.golang.org/grpc from 1.50.0 to 1.50.1 (<a href="https://github-redirect.dependabot.com/cosmos/gogoproto/issues/21">#21</a>)</li> <li><a href="https://github.com/cosmos/gogoproto/commit/c0a5a75024187cd13419a04365953a8fdc99fd98"><code>c0a5a75</code></a> chore(deps): bump amannn/action-semantic-pull-request from 5.0.0 to 5.0.1 (<a href="https://github-redirect.dependabot.com/cosmos/gogoproto/issues/20">#20</a>)</li> <li><a href="https://github.com/cosmos/gogoproto/commit/c2a18447f3586aa33b4e8fcba5cc1c31b3b93e8a"><code>c2a1844</code></a> chore(deps): bump amannn/action-semantic-pull-request from 4.6.0 to 5.0.0 (<a href="https://github-redirect.dependabot.com/cosmos/gogoproto/issues/19">#19</a>)</li> <li><a href="https://github.com/cosmos/gogoproto/commit/aa8e9b1be6eb5738698d270114c93433a5421bc2"><code>aa8e9b1</code></a> chore(deps): bump google.golang.org/grpc from 1.49.0 to 1.50.0 (<a href="https://github-redirect.dependabot.com/cosmos/gogoproto/issues/18">#18</a>)</li> <li><a href="https://github.com/cosmos/gogoproto/commit/adee73738b3c97131d3754293934324cc81d0ca8"><code>adee737</code></a> chore(deps): bump amannn/action-semantic-pull-request from 4.5.0 to 4.6.0 (<a href="https://github-redirect.dependabot.com/cosmos/gogoproto/issues/17">#17</a>)</li> <li><a href="https://github.com/cosmos/gogoproto/commit/802691b05b6a770823dc471a704f82110a44f6f4"><code>802691b</code></a> chore(deps): bump bufbuild/buf-setup-action from 1.7.0 to 1.8.0 (<a href="https://github-redirect.dependabot.com/cosmos/gogoproto/issues/16">#16</a>)</li> <li>See full diff in <a href="https://github.com/cosmos/gogoproto/compare/v1.4.2...v1.4.3">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=github.com/cosmos/gogoproto&package-manager=go_modules&previous-version=1.4.2&new-version=1.4.3)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 22 November 2022, 17:21:05 UTC
cc0c478 dependabot[bot] 22 November 2022, 17:10:27 UTC build(deps): Bump golang.org/x/crypto from 0.2.0 to 0.3.0 (#9727) Bumps [golang.org/x/crypto](https://github.com/golang/crypto) from 0.2.0 to 0.3.0. - [Release notes](https://github.com/golang/crypto/releases) - [Commits](https://github.com/golang/crypto/compare/v0.2.0...v0.3.0) --- updated-dependencies: - dependency-name: golang.org/x/crypto dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> 22 November 2022, 17:10:27 UTC
b9dcddd dependabot[bot] 22 November 2022, 16:27:56 UTC build(deps): Bump google.golang.org/grpc from 1.50.1 to 1.51.0 (#9726) Bumps [google.golang.org/grpc](https://github.com/grpc/grpc-go) from 1.50.1 to 1.51.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/grpc/grpc-go/releases">google.golang.org/grpc's releases</a>.</em></p> <blockquote> <h2>Release 1.51.0</h2> <h1>Behavior Changes</h1> <ul> <li>xds: NACK EDS resources with duplicate addresses in accordance with a recent spec change (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5715">#5715</a>) <ul> <li>Special Thanks: <a href="https://github.com/erni27"><code>@​erni27</code></a></li> </ul> </li> <li>grpc: restrict status codes that can be generated by the control plane (gRFC A54) (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5653">#5653</a>)</li> </ul> <h1>New Features</h1> <ul> <li>client: set grpc-accept-encoding header with all registered compressors (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5541">#5541</a>) <ul> <li>Special Thanks: <a href="https://github.com/jronak"><code>@​jronak</code></a></li> </ul> </li> <li>xds/weightedtarget: return a more meaningful error when all child policies are in <code>TRANSIENT_FAILURE</code> (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5711">#5711</a>)</li> <li>gcp/observability: add &quot;started rpcs&quot; metric (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5768">#5768</a>)</li> <li>xds: de-experimentalize the google-c2p-resolver (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5707">#5707</a>)</li> <li>balancer: add experimental Producer types and methods (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5669">#5669</a>)</li> <li>orca: provide a way for LB policies to receive OOB load reports (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5669">#5669</a>)</li> </ul> <h1>Bug Fixes</h1> <ul> <li>go.mod: upgrade x/text dependency to address <a href="https://www.cve.org/CVERecord?id=CVE-2022-32149">CVE 2022-32149</a> (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5769">#5769</a>)</li> <li>client: fix race that could lead to an incorrect connection state if it was closed immediately after the server's HTTP/2 preface was received (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5714">#5714</a>) <ul> <li>Special Thanks: <a href="https://github.com/fuweid"><code>@​fuweid</code></a></li> </ul> </li> <li>xds: ensure sum of the weights of all EDS localities at the same priority level does not exceed uint32 max (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5703">#5703</a>) <ul> <li>Special Thanks: <a href="https://github.com/erni27"><code>@​erni27</code></a></li> </ul> </li> <li>client: fix binary logging bug which logs a server header on a trailers-only response (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5763">#5763</a>)</li> <li>balancer/priority: fix a bug where unreleased references to removed child policies (and associated state) was causing a memory leak (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5682">#5682</a>)</li> <li>xds/google-c2p: validate URI schema for no authorities (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5756">#5756</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/grpc/grpc-go/commit/eeb9afa1f6b6388152955eeca8926e36ca94c768"><code>eeb9afa</code></a> Change version to 1.51.0 (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5782">#5782</a>)</li> <li><a href="https://github.com/grpc/grpc-go/commit/72812fe3aa93756aca9382ff07d0a3a54eff0b96"><code>72812fe</code></a> gcp/observability: filter logging from cloud ops endpoints calls (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5765">#5765</a>)</li> <li><a href="https://github.com/grpc/grpc-go/commit/0ae33e69dc6542a4e7a92f30e335376431d2ea4d"><code>0ae33e6</code></a> xdsclient: remove unused test code (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5772">#5772</a>)</li> <li><a href="https://github.com/grpc/grpc-go/commit/824f44910d8c300989893d0b3a8ddbea6bee9c8f"><code>824f449</code></a> go.mod: upgrade x/text to v0.4 to address CVE (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5769">#5769</a>)</li> <li><a href="https://github.com/grpc/grpc-go/commit/7f23df022299ea52c9cd00ebe77f5f5cccbb85dc"><code>7f23df0</code></a> xdsclient: switch xdsclient watch deadlock test to e2e style (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5697">#5697</a>)</li> <li><a href="https://github.com/grpc/grpc-go/commit/32f969e8f3f94359b589d85d27a8dd5cbd5c003b"><code>32f969e</code></a> o11y: Added started rpc metric in o11y plugin (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5768">#5768</a>)</li> <li><a href="https://github.com/grpc/grpc-go/commit/b597a8e1d0ce3f63ef8a7b62a23ca1fcc3a60678"><code>b597a8e</code></a> xdsclient: improve authority watchers test (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5700">#5700</a>)</li> <li><a href="https://github.com/grpc/grpc-go/commit/e41e8940c0c481d954a7c23973cd5440b2f0d138"><code>e41e894</code></a> orca: create ORCA producer for LB policies to use to receive OOB load reports...</li> <li><a href="https://github.com/grpc/grpc-go/commit/36d14dbf6665119337650b37629beced691661c4"><code>36d14db</code></a> Fix binary logging bug which logs a server header on a trailers only response...</li> <li><a href="https://github.com/grpc/grpc-go/commit/fcb8bdf7219c76d2b608d45317427cbbd6e69d6c"><code>fcb8bdf</code></a> xds/google-c2p: validate url for no authorities (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5756">#5756</a>)</li> <li>Additional commits viewable in <a href="https://github.com/grpc/grpc-go/compare/v1.50.1...v1.51.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=google.golang.org/grpc&package-manager=go_modules&previous-version=1.50.1&new-version=1.51.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 22 November 2022, 16:27:56 UTC
34ca3fb dependabot[bot] 21 November 2022, 14:56:27 UTC build(deps): Bump github.com/vektra/mockery/v2 from 2.14.1 to 2.15.0 (#9725) Bumps [github.com/vektra/mockery/v2](https://github.com/vektra/mockery) from 2.14.1 to 2.15.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/vektra/mockery/releases">github.com/vektra/mockery/v2's releases</a>.</em></p> <blockquote> <h2>v2.15.0</h2> <h2>Changelog</h2> <ul> <li>e9abbc5 Add multiarch container builds</li> <li>a55c02d Merge pull request <a href="https://github-redirect.dependabot.com/vektra/mockery/issues/515">#515</a> from mathieupost/master</li> <li>1951b28 Merge pull request <a href="https://github-redirect.dependabot.com/vektra/mockery/issues/518">#518</a> from arbourd/add-multiarch-builds</li> <li>434dc3b update to go 1.19</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/vektra/mockery/commit/1951b2850871bc97d132ddfef1f268b7e9aef7bc"><code>1951b28</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/vektra/mockery/issues/518">#518</a> from arbourd/add-multiarch-builds</li> <li><a href="https://github.com/vektra/mockery/commit/a55c02d74a3cfff16ff8cd1706f9ba1d57274ef9"><code>a55c02d</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/vektra/mockery/issues/515">#515</a> from mathieupost/master</li> <li><a href="https://github.com/vektra/mockery/commit/e9abbc5fde5f2bd3aea9b8af3bdc45fa6df1d807"><code>e9abbc5</code></a> Add multiarch container builds</li> <li><a href="https://github.com/vektra/mockery/commit/434dc3bb14cae912e650e9f7bb27072a1061ca26"><code>434dc3b</code></a> update to go 1.19</li> <li>See full diff in <a href="https://github.com/vektra/mockery/compare/v2.14.1...v2.15.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=github.com/vektra/mockery/v2&package-manager=go_modules&previous-version=2.14.1&new-version=2.15.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 21 November 2022, 14:56:27 UTC
fc8df9a Sergio Mena 21 November 2022, 14:12:06 UTC Fix spec in ProcessProposal (#9716) 21 November 2022, 14:12:06 UTC
b85e13a nashqueue 21 November 2022, 11:10:11 UTC Fix Examples for Proposer Selection Specs (#9375) This PR resolves #9346 Co-authored-by: Adi Seredinschi <adizere@gmail.com> Co-authored-by: Adi Seredinschi <a@seredinschi.net> 21 November 2022, 11:10:11 UTC
20ffa4f Adi Seredinschi 20 November 2022, 14:39:14 UTC Remove useless whitespace in Websocket output (#9720) * First try at #9696 * Brief explanation * Removed all prettified JSON RPC responses * Fixes for failing tests. Adapted the assertions in - TestWriteRPCResponseHTTP - TestWriteRPCResponseHTTPError to work with non-pretty JSON-RPC output * Added changelog pending entry * Update CHANGELOG_PENDING.md Co-authored-by: Thane Thomson <connect@thanethomson.com> 20 November 2022, 14:39:14 UTC
f9bfdf4 Lasaro Camargos 18 November 2022, 15:06:56 UTC docs: updates go.md and go-built-in.md as part of issue 9272 (#9688) * Updates the go.md and go-built-in.md tutorials. This is heavily based on the latest version of the tutorial from branch v0.35.0-rc0 * Includes section for Prepare and ProcessProposal * Updates output of abci-cli example * Removes broken example in JS * Fixes mentions to 1/3 and 2/3 and other small edits 18 November 2022, 15:06:56 UTC
2b4436d Callum Waters 17 November 2022, 12:17:50 UTC update metrics docs to include new metrics (#9710) 17 November 2022, 12:17:50 UTC
627b776 dependabot[bot] 15 November 2022, 18:48:01 UTC build(deps): Bump pillow from 9.2.0 to 9.3.0 in /scripts/qa/reporting (#9705) Bumps [pillow](https://github.com/python-pillow/Pillow) from 9.2.0 to 9.3.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/python-pillow/Pillow/releases">pillow's releases</a>.</em></p> <blockquote> <h2>9.3.0</h2> <p><a href="https://pillow.readthedocs.io/en/stable/releasenotes/9.3.0.html">https://pillow.readthedocs.io/en/stable/releasenotes/9.3.0.html</a></p> <h2>Changes</h2> <ul> <li>Initialize libtiff buffer when saving <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6699">#6699</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Limit SAMPLESPERPIXEL to avoid runtime DOS <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6700">#6700</a> [<a href="https://github.com/wiredfool"><code>@​wiredfool</code></a>]</li> <li>Inline fname2char to fix memory leak <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6329">#6329</a> [<a href="https://github.com/nulano"><code>@​nulano</code></a>]</li> <li>Fix memory leaks related to text features <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6330">#6330</a> [<a href="https://github.com/nulano"><code>@​nulano</code></a>]</li> <li>Use double quotes for version check on old CPython on Windows <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6695">#6695</a> [<a href="https://github.com/hugovk"><code>@​hugovk</code></a>]</li> <li>GHA: replace deprecated set-output command with GITHUB_OUTPUT file <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6697">#6697</a> [<a href="https://github.com/nulano"><code>@​nulano</code></a>]</li> <li>Remove backup implementation of Round for Windows platforms <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6693">#6693</a> [<a href="https://github.com/cgohlke"><code>@​cgohlke</code></a>]</li> <li>Upload fribidi.dll to GitHub Actions <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6532">#6532</a> [<a href="https://github.com/nulano"><code>@​nulano</code></a>]</li> <li>Fixed set_variation_by_name offset <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6445">#6445</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Windows build improvements <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6562">#6562</a> [<a href="https://github.com/nulano"><code>@​nulano</code></a>]</li> <li>Fix malloc in _imagingft.c:font_setvaraxes <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6690">#6690</a> [<a href="https://github.com/cgohlke"><code>@​cgohlke</code></a>]</li> <li>Only use ASCII characters in C source file <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6691">#6691</a> [<a href="https://github.com/cgohlke"><code>@​cgohlke</code></a>]</li> <li>Release Python GIL when converting images using matrix operations <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6418">#6418</a> [<a href="https://github.com/hmaarrfk"><code>@​hmaarrfk</code></a>]</li> <li>Added ExifTags enums <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6630">#6630</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Do not modify previous frame when calculating delta in PNG <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6683">#6683</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Added support for reading BMP images with RLE4 compression <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6674">#6674</a> [<a href="https://github.com/npjg"><code>@​npjg</code></a>]</li> <li>Decode JPEG compressed BLP1 data in original mode <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6678">#6678</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>pylint warnings <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6659">#6659</a> [<a href="https://github.com/marksmayo"><code>@​marksmayo</code></a>]</li> <li>Added GPS TIFF tag info <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6661">#6661</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Added conversion between RGB/RGBA/RGBX and LAB <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6647">#6647</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Do not attempt normalization if mode is already normal <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6644">#6644</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Fixed seeking to an L frame in a GIF <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6576">#6576</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Consider all frames when selecting mode for PNG save_all <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6610">#6610</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Don't reassign crc on ChunkStream close <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6627">#6627</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Raise a warning if NumPy failed to raise an error during conversion <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6594">#6594</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Only read a maximum of 100 bytes at a time in IMT header <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6623">#6623</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Show all frames in ImageShow <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6611">#6611</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Allow FLI palette chunk to not be first <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6626">#6626</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>If first GIF frame has transparency for RGB_ALWAYS loading strategy, use RGBA mode <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6592">#6592</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Round box position to integer when pasting embedded color <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6517">#6517</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Removed EXIF prefix when saving WebP <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6582">#6582</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Pad IM palette to 768 bytes when saving <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6579">#6579</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Added DDS BC6H reading <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6449">#6449</a> [<a href="https://github.com/ShadelessFox"><code>@​ShadelessFox</code></a>]</li> <li>Added support for opening WhiteIsZero 16-bit integer TIFF images <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6642">#6642</a> [<a href="https://github.com/JayWiz"><code>@​JayWiz</code></a>]</li> <li>Raise an error when allocating translucent color to RGB palette <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6654">#6654</a> [<a href="https://github.com/jsbueno"><code>@​jsbueno</code></a>]</li> <li>Moved mode check outside of loops <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6650">#6650</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Added reading of TIFF child images <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6569">#6569</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Improved ImageOps palette handling <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6596">#6596</a> [<a href="https://github.com/PososikTeam"><code>@​PososikTeam</code></a>]</li> <li>Defer parsing of palette into colors <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6567">#6567</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Apply transparency to P images in ImageTk.PhotoImage <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6559">#6559</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Use rounding in ImageOps contain() and pad() <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6522">#6522</a> [<a href="https://github.com/bibinhashley"><code>@​bibinhashley</code></a>]</li> <li>Fixed GIF remapping to palette with duplicate entries <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6548">#6548</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Allow remap_palette() to return an image with less than 256 palette entries <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6543">#6543</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> <li>Corrected BMP and TGA palette size when saving <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6500">#6500</a> [<a href="https://github.com/radarhere"><code>@​radarhere</code></a>]</li> </ul> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/python-pillow/Pillow/blob/main/CHANGES.rst">pillow's changelog</a>.</em></p> <blockquote> <h2>9.3.0 (2022-10-29)</h2> <ul> <li> <p>Limit SAMPLESPERPIXEL to avoid runtime DOS <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6700">#6700</a> [wiredfool]</p> </li> <li> <p>Initialize libtiff buffer when saving <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6699">#6699</a> [radarhere]</p> </li> <li> <p>Inline fname2char to fix memory leak <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6329">#6329</a> [nulano]</p> </li> <li> <p>Fix memory leaks related to text features <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6330">#6330</a> [nulano]</p> </li> <li> <p>Use double quotes for version check on old CPython on Windows <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6695">#6695</a> [hugovk]</p> </li> <li> <p>Remove backup implementation of Round for Windows platforms <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6693">#6693</a> [cgohlke]</p> </li> <li> <p>Fixed set_variation_by_name offset <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6445">#6445</a> [radarhere]</p> </li> <li> <p>Fix malloc in _imagingft.c:font_setvaraxes <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6690">#6690</a> [cgohlke]</p> </li> <li> <p>Release Python GIL when converting images using matrix operations <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6418">#6418</a> [hmaarrfk]</p> </li> <li> <p>Added ExifTags enums <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6630">#6630</a> [radarhere]</p> </li> <li> <p>Do not modify previous frame when calculating delta in PNG <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6683">#6683</a> [radarhere]</p> </li> <li> <p>Added support for reading BMP images with RLE4 compression <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6674">#6674</a> [npjg, radarhere]</p> </li> <li> <p>Decode JPEG compressed BLP1 data in original mode <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6678">#6678</a> [radarhere]</p> </li> <li> <p>Added GPS TIFF tag info <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6661">#6661</a> [radarhere]</p> </li> <li> <p>Added conversion between RGB/RGBA/RGBX and LAB <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6647">#6647</a> [radarhere]</p> </li> <li> <p>Do not attempt normalization if mode is already normal <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6644">#6644</a> [radarhere]</p> </li> </ul> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/python-pillow/Pillow/commit/d594f4cb8dc47fb0c69ae58d9fff86faae4515bd"><code>d594f4c</code></a> Update CHANGES.rst [ci skip]</li> <li><a href="https://github.com/python-pillow/Pillow/commit/909dc64ed5f676169aa3d9b0c26f132a06321b83"><code>909dc64</code></a> 9.3.0 version bump</li> <li><a href="https://github.com/python-pillow/Pillow/commit/1a51ce7b955c65c8f2c6bc7772735b197b8a6aa3"><code>1a51ce7</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6699">#6699</a> from hugovk/security-libtiff_buffer</li> <li><a href="https://github.com/python-pillow/Pillow/commit/2444cddab2f83f28687c7c20871574acbb6dbcf3"><code>2444cdd</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/python-pillow/Pillow/issues/6700">#6700</a> from hugovk/security-samples_per_pixel-sec</li> <li><a href="https://github.com/python-pillow/Pillow/commit/744f455830871d61a8de0a5e629d4c2e33817cbb"><code>744f455</code></a> Added release notes</li> <li><a href="https://github.com/python-pillow/Pillow/commit/0846bfae48513f2f51ca8547ed3b8954fa501fda"><code>0846bfa</code></a> Add to release notes</li> <li><a href="https://github.com/python-pillow/Pillow/commit/799a6a01052cea3f417a571d7c64cd14acc18c64"><code>799a6a0</code></a> Fix linting</li> <li><a href="https://github.com/python-pillow/Pillow/commit/00b25fd3ac3648bc28eff5d4c4d816e605e3f05f"><code>00b25fd</code></a> Hide UserWarning in logs</li> <li><a href="https://github.com/python-pillow/Pillow/commit/05b175ef88c22f5c416bc9b8d5b897dea1abbf2c"><code>05b175e</code></a> Tighter test case</li> <li><a href="https://github.com/python-pillow/Pillow/commit/13f2c5ae14901c89c38f898496102afd9daeaf6d"><code>13f2c5a</code></a> Prevent DOS with large SAMPLESPERPIXEL in Tiff IFD</li> <li>Additional commits viewable in <a href="https://github.com/python-pillow/Pillow/compare/9.2.0...9.3.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pillow&package-manager=pip&previous-version=9.2.0&new-version=9.3.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) You can disable automated security fix PRs for this repo from the [Security Alerts page](https://github.com/tendermint/tendermint/network/alerts). </details> 15 November 2022, 18:48:01 UTC
755e147 dependabot[bot] 15 November 2022, 14:27:40 UTC build(deps): Bump golang.org/x/crypto from 0.1.0 to 0.2.0 (#9700) Bumps [golang.org/x/crypto](https://github.com/golang/crypto) from 0.1.0 to 0.2.0. <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/golang/crypto/commit/183a9b70cc805eca27c9474ce65820b468a28795"><code>183a9b7</code></a> go.mod: update golang.org/x dependencies</li> <li><a href="https://github.com/golang/crypto/commit/334521b960a2a4412e9e7486c89e9981cf160ddb"><code>334521b</code></a> ssh: fix typo</li> <li><a href="https://github.com/golang/crypto/commit/a3485e174077e5296d3d4a43ca31d2d21b40be2c"><code>a3485e1</code></a> all: use math/bits.RotateLeft</li> <li>See full diff in <a href="https://github.com/golang/crypto/compare/v0.1.0...v0.2.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=golang.org/x/crypto&package-manager=go_modules&previous-version=0.1.0&new-version=0.2.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 15 November 2022, 14:27:40 UTC
b07e1fa dependabot[bot] 15 November 2022, 13:37:23 UTC build(deps): Bump github.com/prometheus/client_golang from 1.13.1 to 1.14.0 (#9701) Bumps [github.com/prometheus/client_golang](https://github.com/prometheus/client_golang) from 1.13.1 to 1.14.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/prometheus/client_golang/releases">github.com/prometheus/client_golang's releases</a>.</em></p> <blockquote> <h2>1.14.0 / 2022-11-08</h2> <p>It might look like a small release, but it's quite opposite 😱 There were many non user facing changes and fixes and enormous work from engineers from Grafana to add native histograms in 💪🏾 Enjoy! 😍</p> <h2>What's Changed</h2> <ul> <li>[FEATURE] Add Support for Native Histograms. <a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1150">#1150</a></li> <li>[CHANGE] Extend <code>prometheus.Registry</code> to implement <code>prometheus.Collector</code> interface. <a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1103">#1103</a></li> </ul> <h2>New Contributors</h2> <ul> <li><a href="https://github.com/hairyhenderson"><code>@​hairyhenderson</code></a> made their first contribution in <a href="https://github-redirect.dependabot.com/prometheus/client_golang/pull/1118">prometheus/client_golang#1118</a></li> <li><a href="https://github.com/rfratto"><code>@​rfratto</code></a> made their first contribution in <a href="https://github-redirect.dependabot.com/prometheus/client_golang/pull/1103">prometheus/client_golang#1103</a></li> <li><a href="https://github.com/donotnoot"><code>@​donotnoot</code></a> made their first contribution in <a href="https://github-redirect.dependabot.com/prometheus/client_golang/pull/1125">prometheus/client_golang#1125</a></li> <li><a href="https://github.com/rogerogers"><code>@​rogerogers</code></a> made their first contribution in <a href="https://github-redirect.dependabot.com/prometheus/client_golang/pull/1130">prometheus/client_golang#1130</a></li> <li><a href="https://github.com/balintzs"><code>@​balintzs</code></a> made their first contribution in <a href="https://github-redirect.dependabot.com/prometheus/client_golang/pull/1148">prometheus/client_golang#1148</a></li> <li><a href="https://github.com/fstab"><code>@​fstab</code></a> made their first contribution in <a href="https://github-redirect.dependabot.com/prometheus/client_golang/pull/1146">prometheus/client_golang#1146</a></li> <li><a href="https://github.com/jessicalins"><code>@​jessicalins</code></a> made their first contribution in <a href="https://github-redirect.dependabot.com/prometheus/client_golang/pull/1152">prometheus/client_golang#1152</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/prometheus/client_golang/compare/v1.13.1...v1.14.0">https://github.com/prometheus/client_golang/compare/v1.13.1...v1.14.0</a></p> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/prometheus/client_golang/blob/main/CHANGELOG.md">github.com/prometheus/client_golang's changelog</a>.</em></p> <blockquote> <h2>1.14.0 / 2022-11-08</h2> <ul> <li>[FEATURE] Add Support for Native Histograms. <a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1150">#1150</a></li> <li>[CHANGE] Extend <code>prometheus.Registry</code> to implement <code>prometheus.Collector</code> interface. <a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1103">#1103</a></li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/prometheus/client_golang/commit/254e5468413f19fb75cdad45f5ddc0b8c975188c"><code>254e546</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1162">#1162</a> from kakkoyun/cut-1.14.0</li> <li><a href="https://github.com/prometheus/client_golang/commit/c8a3d321a03310f9e9a25a4b2da05aa3518c1c7b"><code>c8a3d32</code></a> Cut v1.14.0</li> <li><a href="https://github.com/prometheus/client_golang/commit/07d3a8149489c760003c27ef91025fda7da42172"><code>07d3a81</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1161">#1161</a> from prometheus/release-1.13</li> <li><a href="https://github.com/prometheus/client_golang/commit/870469ecf91e06e7f587b507971049b1383ae386"><code>870469e</code></a> Test and support 1.19 (<a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1160">#1160</a>)</li> <li><a href="https://github.com/prometheus/client_golang/commit/b785d0c8289996c6529f1f58e402b77ed0b82f5c"><code>b785d0c</code></a> Fix go_collector_latest_test Fail on go1.19 (<a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1136">#1136</a>)</li> <li><a href="https://github.com/prometheus/client_golang/commit/4d54769c6b78afe13bb19481c6acf99b573b6a72"><code>4d54769</code></a> Fix float64 comparison test failure on archs using FMA (<a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1133">#1133</a>)</li> <li><a href="https://github.com/prometheus/client_golang/commit/5f202eefdb5dcb9b5b26d4d7c3351d1e5a0d9bc7"><code>5f202ee</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1150">#1150</a> from prometheus/sparsehistogram</li> <li><a href="https://github.com/prometheus/client_golang/commit/fffb76cafec47c92b6d5cace647164ea3f9ed845"><code>fffb76c</code></a> Merge branch 'main' into sparsehistogram</li> <li><a href="https://github.com/prometheus/client_golang/commit/e92a8c7f4836260163f82ba84f33b62c2787af2d"><code>e92a8c7</code></a> Avoid the term 'sparse' where possible</li> <li><a href="https://github.com/prometheus/client_golang/commit/0859bb8f37dd4bd135f5eaba07a2560a7df22753"><code>0859bb8</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1152">#1152</a> from jessicalins/update-to-custom-reg</li> <li>Additional commits viewable in <a href="https://github.com/prometheus/client_golang/compare/v1.13.1...v1.14.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=github.com/prometheus/client_golang&package-manager=go_modules&previous-version=1.13.1&new-version=1.14.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 15 November 2022, 13:37:23 UTC
ae164bf dependabot[bot] 15 November 2022, 12:47:46 UTC build(deps): Bump github.com/btcsuite/btcd/btcec/v2 from 2.3.0 to 2.3.1 (#9702) 15 November 2022, 12:47:46 UTC
eb14a95 dependabot[bot] 15 November 2022, 12:06:53 UTC build(deps): Bump golang.org/x/net from 0.1.0 to 0.2.0 (#9703) 15 November 2022, 12:06:53 UTC
a7dc8aa Lasaro Camargos 14 November 2022, 19:28:42 UTC Disambiguates wording in EndBlock (#9698) The current text gives margin to committing changes to the app state during EndBlock, but it should only happen during Commit. Also, PrepareProposal is not allowed to modify transactions, but only the transaction set. 14 November 2022, 19:28:42 UTC
d324430 Thane Thomson 11 November 2022, 14:06:34 UTC Update codeowners to include Adi and Lásaro (#9697) Signed-off-by: Thane Thomson <connect@thanethomson.com> Signed-off-by: Thane Thomson <connect@thanethomson.com> 11 November 2022, 14:06:34 UTC
99a7ac8 Callum Waters 10 November 2022, 18:13:15 UTC metrics: add separate statesync and blocksync metrics (#9682) 10 November 2022, 18:13:15 UTC
f12588a Callum Waters 10 November 2022, 15:59:10 UTC config: add bootstrap peers (#9680) 10 November 2022, 15:59:10 UTC
d534285 Thane Thomson 10 November 2022, 13:05:15 UTC Forward-port v0.34.23 changelog entry (#9685) From #9684. [Rendered](https://github.com/tendermint/tendermint/blob/thane/v0.34.23-changelog/CHANGELOG.md#v03423) --- #### PR checklist - [x] Tests written/updated, or no tests needed - [x] `CHANGELOG_PENDING.md` updated, or no changelog entry needed - [x] Updated relevant documentation (`docs/`) and code comments, or no documentation updates needed 10 November 2022, 13:05:15 UTC
ffae184 JayT106 09 November 2022, 23:50:25 UTC fix check_tx cache problem (#9690) 09 November 2022, 23:50:25 UTC
c6a0dc8 Thane Thomson 09 November 2022, 12:07:41 UTC docs: Add supported versions to README (#9677) Signed-off-by: Thane Thomson <connect@thanethomson.com> Signed-off-by: Thane Thomson <connect@thanethomson.com> 09 November 2022, 12:07:41 UTC
3aa6c81 Thane Thomson 08 November 2022, 22:43:17 UTC docs: Add new per-message type P2P metrics (#9676) * docs: Monospace metric names Signed-off-by: Thane Thomson <connect@thanethomson.com> * docs: Consistently capitalize metric types Signed-off-by: Thane Thomson <connect@thanethomson.com> * docs: Monospace metric tags Signed-off-by: Thane Thomson <connect@thanethomson.com> * docs: Fix underscores in metrics page Signed-off-by: Thane Thomson <connect@thanethomson.com> * docs: Make metric description capitalization consistent Signed-off-by: Thane Thomson <connect@thanethomson.com> * docs: Add new per-message P2P metrics Signed-off-by: Thane Thomson <connect@thanethomson.com> Signed-off-by: Thane Thomson <connect@thanethomson.com> 08 November 2022, 22:43:17 UTC
ff0f988 dependabot[bot] 07 November 2022, 13:44:11 UTC build(deps): Bump github.com/prometheus/client_golang from 1.13.0 to 1.13.1 (#9672) Bumps [github.com/prometheus/client_golang](https://github.com/prometheus/client_golang) from 1.13.0 to 1.13.1. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/prometheus/client_golang/releases">github.com/prometheus/client_golang's releases</a>.</em></p> <blockquote> <h2>1.13.1 / 2022-11-02</h2> <ul> <li>[BUGFIX] Fix race condition with Exemplar in Counter. <a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1146">#1146</a></li> <li>[BUGFIX] Fix <code>CumulativeCount</code> value of <code>+Inf</code> bucket created from exemplar. <a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1148">#1148</a></li> <li>[BUGFIX] Fix double-counting bug in <code>promhttp.InstrumentRoundTripperCounter</code>. <a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1118">#1118</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/prometheus/client_golang/compare/v1.13.0...v1.13.1">https://github.com/prometheus/client_golang/compare/v1.13.0...v1.13.1</a></p> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/prometheus/client_golang/blob/v1.13.1/CHANGELOG.md">github.com/prometheus/client_golang's changelog</a>.</em></p> <blockquote> <h2>1.13.1 / 2022-11-01</h2> <ul> <li>[BUGFIX] Fix race condition with Exemplar in Counter. <a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1146">#1146</a></li> <li>[BUGFIX] Fix <code>CumulativeCount</code> value of <code>+Inf</code> bucket created from exemplar. <a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1148">#1148</a></li> <li>[BUGFIX] Fix double-counting bug in <code>promhttp.InstrumentRoundTripperCounter</code>. <a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1118">#1118</a></li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/prometheus/client_golang/commit/53e51c4f5338f760a766232610e574b00ea720d8"><code>53e51c4</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1157">#1157</a> from prometheus/cut-1.13.1</li> <li><a href="https://github.com/prometheus/client_golang/commit/79ca0eb2ba90a9c1754d29177d0bfe3afb425449"><code>79ca0eb</code></a> Added tip from Björn + Grammarly.</li> <li><a href="https://github.com/prometheus/client_golang/commit/078f11f85b2cb5d535f5856903e73b758a8f0568"><code>078f11f</code></a> Cut 1.13.1 release (+ documenting release process).</li> <li><a href="https://github.com/prometheus/client_golang/commit/ddd7f0edcd31dd27b31ee9c54b5c22d44258d5d1"><code>ddd7f0e</code></a> Fix race condition with Exemplar in Counter (<a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1146">#1146</a>)</li> <li><a href="https://github.com/prometheus/client_golang/commit/1f93f64580770181b19e685e1a243923fb61d476"><code>1f93f64</code></a> Fix <code>CumulativeCount</code> value of <code>+Inf</code> bucket created from exemplar (<a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1148">#1148</a>)</li> <li><a href="https://github.com/prometheus/client_golang/commit/8cc2b6c472a5d4cfc3d9fe37c5a23f7239faf707"><code>8cc2b6c</code></a> Fix double-counting bug in promhttp.InstrumentRoundTripperCounter (<a href="https://github-redirect.dependabot.com/prometheus/client_golang/issues/1118">#1118</a>)</li> <li>See full diff in <a href="https://github.com/prometheus/client_golang/compare/v1.13.0...v1.13.1">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=github.com/prometheus/client_golang&package-manager=go_modules&previous-version=1.13.0&new-version=1.13.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 07 November 2022, 13:44:11 UTC
0beac72 dependabot[bot] 07 November 2022, 11:57:42 UTC build(deps): Bump github.com/gofrs/uuid from 4.3.0+incompatible to 4.3.1+incompatible (#9671) Bumps [github.com/gofrs/uuid](https://github.com/gofrs/uuid) from 4.3.0+incompatible to 4.3.1+incompatible. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/gofrs/uuid/releases">github.com/gofrs/uuid's releases</a>.</em></p> <blockquote> <h2>v4.3.1</h2> <ul> <li>Update UUIDv7 to use unix millisecond calculation that is friendly to legacy go versions by <a href="https://github.com/convto"><code>@​convto</code></a> Full Changelog: v4.3.0...v4.3.1</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/gofrs/uuid/commit/e1079f31cfcadf78856b9866d15574dd6546e29b"><code>e1079f3</code></a> Use legacy go versions compatible unix millisecond calculation (<a href="https://github-redirect.dependabot.com/gofrs/uuid/issues/104">#104</a>)</li> <li>See full diff in <a href="https://github.com/gofrs/uuid/compare/v4.3.0...v4.3.1">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=github.com/gofrs/uuid&package-manager=go_modules&previous-version=4.3.0+incompatible&new-version=4.3.1+incompatible)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 07 November 2022, 11:57:42 UTC
45071d1 Thane Thomson 07 November 2022, 11:46:55 UTC abci: Add unsynchronized local client (#9660) * Remove extra interface cast Signed-off-by: Thane Thomson <connect@thanethomson.com> * Remove irrelevant comment Signed-off-by: Thane Thomson <connect@thanethomson.com> * abci: Add unsynchronized local client Signed-off-by: Thane Thomson <connect@thanethomson.com> * proxy: Add unsync local client creator Signed-off-by: Thane Thomson <connect@thanethomson.com> * e2e: Add sync app for use with unsync local client Signed-off-by: Thane Thomson <connect@thanethomson.com> * abci: Elaborate on mutex param in unsync local client Signed-off-by: Thane Thomson <connect@thanethomson.com> * proxy: Remove unnecessary comment Signed-off-by: Thane Thomson <connect@thanethomson.com> * abcicli: Remove unnecessary mutex param from unsync client Signed-off-by: Thane Thomson <connect@thanethomson.com> * ci/e2e: Explicitly use sync app for validator04 Signed-off-by: Thane Thomson <connect@thanethomson.com> * e2e: Ensure app is definitely the E2E app Signed-off-by: Thane Thomson <connect@thanethomson.com> Signed-off-by: Thane Thomson <connect@thanethomson.com> 07 November 2022, 11:46:55 UTC
5a9a84e dependabot[bot] 07 November 2022, 11:18:51 UTC build(deps): Bump github.com/spf13/viper from 1.13.0 to 1.14.0 (#9670) Bumps [github.com/spf13/viper](https://github.com/spf13/viper) from 1.13.0 to 1.14.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/spf13/viper/releases">github.com/spf13/viper's releases</a>.</em></p> <blockquote> <h2>v1.14.0</h2> <h2>What's Changed</h2> <h3>Enhancements 🚀</h3> <ul> <li>feat: make Viper compile on platforms unsupported by fsnotify by <a href="https://github.com/sagikazarmark"><code>@​sagikazarmark</code></a> in <a href="https://github-redirect.dependabot.com/spf13/viper/pull/1457">spf13/viper#1457</a></li> <li>Fsnotify improvements by <a href="https://github.com/sagikazarmark"><code>@​sagikazarmark</code></a> in <a href="https://github-redirect.dependabot.com/spf13/viper/pull/1458">spf13/viper#1458</a></li> <li>Disable watch on appengine by <a href="https://github.com/sagikazarmark"><code>@​sagikazarmark</code></a> in <a href="https://github-redirect.dependabot.com/spf13/viper/pull/1460">spf13/viper#1460</a></li> </ul> <h3>Breaking Changes 🛠</h3> <ul> <li>Drop support for Go 1.15 by <a href="https://github.com/sagikazarmark"><code>@​sagikazarmark</code></a> in <a href="https://github-redirect.dependabot.com/spf13/viper/pull/1428">spf13/viper#1428</a></li> </ul> <h3>Dependency Updates ⬆️</h3> <ul> <li>build(deps): bump github.com/spf13/afero from 1.8.2 to 1.9.2 by <a href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a href="https://github-redirect.dependabot.com/spf13/viper/pull/1406">spf13/viper#1406</a></li> <li>build(deps): bump github.com/sagikazarmark/crypt from 0.6.0 to 0.7.0 by <a href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a href="https://github-redirect.dependabot.com/spf13/viper/pull/1437">spf13/viper#1437</a></li> <li>build(deps): bump github.com/stretchr/testify from 1.8.0 to 1.8.1 by <a href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a href="https://github-redirect.dependabot.com/spf13/viper/pull/1453">spf13/viper#1453</a></li> <li>build(deps): bump github.com/fsnotify/fsnotify from 1.5.4 to 1.6.0 by <a href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a href="https://github-redirect.dependabot.com/spf13/viper/pull/1449">spf13/viper#1449</a></li> <li>chore: update crypt by <a href="https://github.com/sagikazarmark"><code>@​sagikazarmark</code></a> in <a href="https://github-redirect.dependabot.com/spf13/viper/pull/1461">spf13/viper#1461</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/spf13/viper/compare/v1.13.0...v1.14.0">https://github.com/spf13/viper/compare/v1.13.0...v1.14.0</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/spf13/viper/commit/b89e554a96abde447ad13a26dcc59fd00375e555"><code>b89e554</code></a> chore: update crypt</li> <li><a href="https://github.com/spf13/viper/commit/db9f89ac41895a5f8f60c8445c6fed349e4ba19e"><code>db9f89a</code></a> chore: disable watch on appengine</li> <li><a href="https://github.com/spf13/viper/commit/4b8d14881e10288b24eddd0873b0c0ce4710a333"><code>4b8d148</code></a> refactor: use new Has fsnotify method for event matching</li> <li><a href="https://github.com/spf13/viper/commit/2e99a57324e6bbe3013d3fcba7713274fbf82066"><code>2e99a57</code></a> refactor: rename watch file to unsupported</li> <li><a href="https://github.com/spf13/viper/commit/dcb7f30f39751d61fe3a6c6d0568973736042e65"><code>dcb7f30</code></a> feat: fix compilation for all platforms unsupported by fsnotify</li> <li><a href="https://github.com/spf13/viper/commit/2e04739b68e9094f42360918c25b44d11db4f7db"><code>2e04739</code></a> ci: drop dedicated wasm build</li> <li><a href="https://github.com/spf13/viper/commit/b2234f214f6048d5bab7d676e66fc81c55b3332a"><code>b2234f2</code></a> ci: add build for aix</li> <li><a href="https://github.com/spf13/viper/commit/52009d34937352d756f2c2ec160662585f6cdf0a"><code>52009d3</code></a> feat: disable watcher on aix</li> <li><a href="https://github.com/spf13/viper/commit/b274f639e0fd0b8308abeeea120f7e9ff84d42a9"><code>b274f63</code></a> build(deps): bump github.com/fsnotify/fsnotify from 1.5.4 to 1.6.0</li> <li><a href="https://github.com/spf13/viper/commit/7c62cfdbac2169039411f196bc639d5e5618ea23"><code>7c62cfd</code></a> build(deps): bump github.com/stretchr/testify from 1.8.0 to 1.8.1</li> <li>Additional commits viewable in <a href="https://github.com/spf13/viper/compare/v1.13.0...v1.14.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=github.com/spf13/viper&package-manager=go_modules&previous-version=1.13.0&new-version=1.14.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 07 November 2022, 11:18:51 UTC
f008a27 dependabot[bot] 07 November 2022, 11:08:39 UTC build(deps): Bump slackapi/slack-github-action from 1.22.0 to 1.23.0 (#9669) Bumps [slackapi/slack-github-action](https://github.com/slackapi/slack-github-action) from 1.22.0 to 1.23.0. - [Release notes](https://github.com/slackapi/slack-github-action/releases) - [Commits](https://github.com/slackapi/slack-github-action/compare/v1.22...v1.23.0) --- updated-dependencies: - dependency-name: slackapi/slack-github-action dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> 07 November 2022, 11:08:39 UTC
816c6ba Thane Thomson 03 November 2022, 17:19:44 UTC rpc: Add caching support (#9650) * Set cache control in the HTTP-RPC response header * Add a simply cache policy to the RPC routes * add a condition to check the RPC request has default height settings * fix cherry pick error * update pending log * use options struct intead of single parameter * refacor FuncOptions to functional options * add functional options in WebSocket RPC function * revert doc * replace deprecated function call * revise functional options * remove unuse comment * fix revised error * adjust cache-control settings * Update rpc/jsonrpc/server/http_json_handler.go Co-authored-by: Thane Thomson <connect@thanethomson.com> * linter: Fix false positive Signed-off-by: Thane Thomson <connect@thanethomson.com> * rpc: Separate cacheable and non-cacheable HTTP response writers Allows us to roll this change out in a non-API-breaking way, since this is an additive change. Signed-off-by: Thane Thomson <connect@thanethomson.com> * rpc: Ensure consistent caching strategy Ensure a consistent caching strategy across both JSONRPC- and URI-based requests. This requires a bit of a refactor of the previous caching logic, which is complicated a little by the complex reflection-based approach taken in the Tendermint RPC. Signed-off-by: Thane Thomson <connect@thanethomson.com> * rpc: Add more tests for caching Signed-off-by: Thane Thomson <connect@thanethomson.com> * Update CHANGELOG_PENDING Signed-off-by: Thane Thomson <connect@thanethomson.com> * light: Sync routes config with RPC core Signed-off-by: Thane Thomson <connect@thanethomson.com> * rpc: Update OpenAPI docs Signed-off-by: Thane Thomson <connect@thanethomson.com> Signed-off-by: Thane Thomson <connect@thanethomson.com> Co-authored-by: jayt106 <jaytseng106@gmail.com> Co-authored-by: jay tseng <jay.tseng@crypto.com> Co-authored-by: JayT106 <JayT106@users.noreply.github.com> 03 November 2022, 17:19:44 UTC
9ec9085 Lasaro Camargos 03 November 2022, 17:07:45 UTC Moves the PBTS ADR to Accepted list (#9654) ditto --- #### PR checklist - [x] Tests written/updated, or no tests needed - [x] `CHANGELOG_PENDING.md` updated, or no changelog entry needed - [x] Updated relevant documentation (`docs/`) and code comments, or no documentation updates needed 03 November 2022, 17:07:45 UTC
f58ba4d Lasaro Camargos 03 November 2022, 16:35:22 UTC Removes space in hyperlink (#9653) Simple formatting issue. --- #### PR checklist - [x] Tests written/updated, or no tests needed - [x] `CHANGELOG_PENDING.md` updated, or no changelog entry needed - [x] Updated relevant documentation (`docs/`) and code comments, or no documentation updates needed 03 November 2022, 16:35:22 UTC
6bde634 Daniel 03 November 2022, 15:46:42 UTC Documentation of p2p layer in Tendermint v0.34 (#9348) * spec: overview of p2p in v0.34 (#9120) * Iniital comments on v0.34 p2p * Added conf, updated text * Moved everything to spec * Update README.md * spec: overview of the p2p implementation in v0.34 (#9126) * Spec: p2p v0.34 doc, switch initial documentation * Spec: p2p v0.34 doc, list of source files * Spec: p2p v0.34 doc, transport documentation * Spec: p2p v0.34 doc, transport error handling * Spec: p2p v0.34 doc, PEX initial documentation * PEX protocol documentation is a separated file * PEX reactor documentation with a general documentation, including the address book and its role as (outbound) peer manager. * Spec: p2p v0.34 doc, PEX protocol documentation * Spec: p2p v0.34 doc, PEX protocol on seed nodes * Spec: p2p v0.34 doc, address book * Spec: p2p v0.34 doc, address book, more details * Spec: p2p v0.34 doc, address book persistence * Spec: p2p v0.34 doc, address book random samples * Spec: p2p v0.34 doc, status of this documentation * Spec: p2p v0.34 doc, pex reactor documentation * Spec: p2p v0.34 doc, addressing PR #9126 comments Co-authored-by: Jasmina Malicevic <jasmina.dustinac@gmail.com> * Spec: p2p v0.34 doc, peer manager, outbound peers Co-authored-by: Daniel Cason <cason@gandria> Co-authored-by: Jasmina Malicevic <jasmina.dustinac@gmail.com> * spec:p2p v0.34 introduction (#9319) * restructure README.md initial * Fix typos * Reorganization * spec: overview of p2p in v0.34 (#9120) * Iniital comments on v0.34 p2p * Added conf, updated text * Moved everything to spec * Update README.md * spec: overview of the p2p implementation in v0.34 (#9126) * Spec: p2p v0.34 doc, switch initial documentation * Spec: p2p v0.34 doc, list of source files * Spec: p2p v0.34 doc, transport documentation * Spec: p2p v0.34 doc, transport error handling * Spec: p2p v0.34 doc, PEX initial documentation * PEX protocol documentation is a separated file * PEX reactor documentation with a general documentation, including the address book and its role as (outbound) peer manager. * Spec: p2p v0.34 doc, PEX protocol documentation * Spec: p2p v0.34 doc, PEX protocol on seed nodes * Spec: p2p v0.34 doc, address book * Spec: p2p v0.34 doc, address book, more details * Spec: p2p v0.34 doc, address book persistence * Spec: p2p v0.34 doc, address book random samples * Spec: p2p v0.34 doc, status of this documentation * Spec: p2p v0.34 doc, pex reactor documentation * Spec: p2p v0.34 doc, addressing PR #9126 comments Co-authored-by: Jasmina Malicevic <jasmina.dustinac@gmail.com> * Spec: p2p v0.34 doc, peer manager, outbound peers Co-authored-by: Daniel Cason <cason@gandria> Co-authored-by: Jasmina Malicevic <jasmina.dustinac@gmail.com> * spec:p2p v0.34 introduction (#9319) * restructure README.md initial * Fix typos * Reorganization * spec: p2p v0.34, addressbook review * spec: p2p v0.34, peer manager review * spec: p2p v0.34, peer manager review * spec: p2p v0.34, peer manager review * spec: p2p v0.34, peer manager review * spec: p2p v0.34, peer manager review * spec: p2p v0.34, peer manager review * spec: p2p v0.34, peer manager review * Filled config description * spec: p2p v0.34, transport review * spec: p2p v0.34, switch review * spec: p2p v0.34, overview, first version * spec: p2p v0.34, peer manager review * spec: p2p v0.34, shorter readme * Configuration update * Configuration update * Shortened README * spec: p2p v0.34, readme intro * spec: p2p v0.34, readme contents * spec: p2p v0.34, readme references * spec: p2p readme points to v0.34 * spec: p2p, v0.34, fixing brokend markdown links * Makrdown fix * Apply suggestions from code review Co-authored-by: Adi Seredinschi <adizere@gmail.com> Co-authored-by: Zarko Milosevic <zarko@informal.systems> * spec: p2p v0.34, address book new intro * spec: p2p v0.34, address book buckets summary * spec: p2p v0.34, peer manager, issue link * spec: p2p v0.34, fixing links * spec: p2p v0.34, addressing comments from reviews * spec: p2p v0.34, addressing comments from reviews * Apply suggestions from Jasmina's code review Co-authored-by: Jasmina Malicevic <jasmina.dustinac@gmail.com> * spec: p2p v0.34, addressing comments from reviews * Apply suggestions from code review Co-authored-by: Sergio Mena <sergio@informal.systems> * Apply suggestions from code review Co-authored-by: Jasmina Malicevic <jasmina.dustinac@gmail.com> Co-authored-by: Sergio Mena <sergio@informal.systems> * spec: p2p, v0.34, address book section reorganized * spec: p2p, v0.34, addressing review comments * Typos * Typo * spec: p2p, v0.34, address book markbad Co-authored-by: Jasmina Malicevic <jasmina.dustinac@gmail.com> Co-authored-by: Daniel Cason <cason@gandria> Co-authored-by: Adi Seredinschi <adizere@gmail.com> Co-authored-by: Zarko Milosevic <zarko@informal.systems> Co-authored-by: Sergio Mena <sergio@informal.systems> 03 November 2022, 15:46:42 UTC
d704c0a Rootul P 02 November 2022, 11:25:05 UTC docs: describe undocumented `MempoolConfig` fields (#9598) * docs: describe undocumented MempoolConfig fields Co-authored-by: Jasmina Malicevic <jasmina.dustinac@gmail.com> 02 November 2022, 11:25:05 UTC
629cdc7 Jasmina Malicevic 02 November 2022, 09:49:25 UTC spec/abci: Removed reference to Finalize block (#9656) * spec/abci: Removed reference to Finalize block * Update spec/abci/abci++_methods.md Co-authored-by: Sergio Mena <sergio@informal.systems> Co-authored-by: Sergio Mena <sergio@informal.systems> 02 November 2022, 09:49:25 UTC
c8f9f06 dependabot[bot] 31 October 2022, 20:04:34 UTC build(deps): Bump github.com/vektra/mockery/v2 from 2.14.0 to 2.14.1 (#9649) Bumps [github.com/vektra/mockery/v2](https://github.com/vektra/mockery) from 2.14.0 to 2.14.1. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/vektra/mockery/releases">github.com/vektra/mockery/v2's releases</a>.</em></p> <blockquote> <h2>v2.14.1</h2> <h2>Changelog</h2> <ul> <li>1361e94 Merge pull request <a href="https://github-redirect.dependabot.com/vektra/mockery/issues/493">#493</a> from CorentinClabaut/doc</li> <li>546b334 Merge pull request <a href="https://github-redirect.dependabot.com/vektra/mockery/issues/496">#496</a> from ccoVeille/typos</li> <li>94c17ff Merge pull request <a href="https://github-redirect.dependabot.com/vektra/mockery/issues/511">#511</a> from acln0/respect-dumb-terminal</li> <li>178902b PR update</li> <li>464ea71 Slightly improve documentation</li> <li>c60fce5 cmd: respect TERM=dumb by not using colors</li> <li>4ca0450 fix typos and style in documentation, test and error reporting</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/vektra/mockery/commit/94c17ff51f0fac0dbcecfc7e56397167b6905ecb"><code>94c17ff</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/vektra/mockery/issues/511">#511</a> from acln0/respect-dumb-terminal</li> <li><a href="https://github.com/vektra/mockery/commit/c60fce57fa3be76f90bdec579a45a3b6712496c2"><code>c60fce5</code></a> cmd: respect TERM=dumb by not using colors</li> <li><a href="https://github.com/vektra/mockery/commit/546b33489df53ed09e5714f46872e368ecb4b632"><code>546b334</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/vektra/mockery/issues/496">#496</a> from ccoVeille/typos</li> <li><a href="https://github.com/vektra/mockery/commit/4ca0450f9bbbd2a535c10921f05121dbbb5b95fd"><code>4ca0450</code></a> fix typos and style in documentation, test and error reporting</li> <li><a href="https://github.com/vektra/mockery/commit/1361e94bd2c5b9e977c7d03f1ff7ecc74ac566c7"><code>1361e94</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/vektra/mockery/issues/493">#493</a> from CorentinClabaut/doc</li> <li><a href="https://github.com/vektra/mockery/commit/178902b330f3deebf3dcee7b8b09db94b1a4ab32"><code>178902b</code></a> PR update</li> <li><a href="https://github.com/vektra/mockery/commit/464ea71ef6138388f6bf51de074962cfb2168568"><code>464ea71</code></a> Slightly improve documentation</li> <li>See full diff in <a href="https://github.com/vektra/mockery/compare/v2.14.0...v2.14.1">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=github.com/vektra/mockery/v2&package-manager=go_modules&previous-version=2.14.0&new-version=2.14.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 31 October 2022, 20:04:34 UTC
f138cb9 Thane Thomson 31 October 2022, 19:27:49 UTC ci: Run Markdown link checker nightly (#9642) * ci: Run Markdown link checker nightly Signed-off-by: Thane Thomson <connect@thanethomson.com> * ci: Switch to Informal Systems fork of link checker Signed-off-by: Thane Thomson <connect@thanethomson.com> * Update link checker config to work with GitHub As per https://github.com/tcort/markdown-link-check/issues/201#issuecomment-1110242146 Signed-off-by: Thane Thomson <connect@thanethomson.com> Signed-off-by: Thane Thomson <connect@thanethomson.com> 31 October 2022, 19:27:49 UTC
83b7f4a Thane Thomson 28 October 2022, 15:01:16 UTC ci: Fix linter complaint (#9645) Fixes a very silly linter complaint that makes absolutely no sense and is blocking the merging of several PRs. --- #### PR checklist - [x] Tests written/updated, or no tests needed - [x] `CHANGELOG_PENDING.md` updated, or no changelog entry needed - [x] Updated relevant documentation (`docs/`) and code comments, or no documentation updates needed 28 October 2022, 15:01:16 UTC
09b8708 William Banfield 27 October 2022, 19:46:15 UTC p2p: add a per-message type send and receive metric (#9622) * p2p: ressurrect the p2p envelope and use to calculate message metric Co-authored-by: Callum Waters <cmwaters19@gmail.com> 27 October 2022, 19:46:15 UTC
d95e423 dependabot[bot] 27 October 2022, 15:17:45 UTC build(deps): Bump github.com/spf13/cobra from 1.6.0 to 1.6.1 (#9635) Bumps [github.com/spf13/cobra](https://github.com/spf13/cobra) from 1.6.0 to 1.6.1. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/spf13/cobra/releases">github.com/spf13/cobra's releases</a>.</em></p> <blockquote> <h2>v1.6.1</h2> <h3>Bug fixes 🐛</h3> <ul> <li>Fixes a panic when <code>AddGroup</code> isn't called before <code>AddCommand(my-sub-command)</code> is executed. This can happen within more complex cobra file structures that have many different <code>init</code>s to be executed. Now, the check for groups has been moved to <code>ExecuteC</code> and provides more flexibility when working with grouped commands - <a href="https://github.com/marckhouzam"><code>@​marckhouzam</code></a> (and shout out to <a href="https://github.com/aawsome"><code>@​aawsome</code></a>, <a href="https://github.com/andig"><code>@​andig</code></a> and <a href="https://github.com/KINGSABRI"><code>@​KINGSABRI</code></a> for a deep investigation into this! 👏🏼)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/spf13/cobra/commit/b43be995ebb4bee335a787bd44498b91aef7619c"><code>b43be99</code></a> Check for group presence after full initialization (<a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1839">#1839</a>) (<a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1841">#1841</a>)</li> <li>See full diff in <a href="https://github.com/spf13/cobra/compare/v1.6.0...v1.6.1">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=github.com/spf13/cobra&package-manager=go_modules&previous-version=1.6.0&new-version=1.6.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 27 October 2022, 15:17:45 UTC
95bd4b6 Callum Waters 27 October 2022, 14:50:27 UTC node: improve pprof lifecycle (#9628) 27 October 2022, 14:50:27 UTC
98ad5f1 dependabot[bot] 27 October 2022, 11:50:20 UTC build(deps): Bump github.com/btcsuite/btcd/btcec/v2 from 2.2.1 to 2.3.0 (#9634) Bumps [github.com/btcsuite/btcd/btcec/v2](https://github.com/btcsuite/btcd) from 2.2.1 to 2.3.0. <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/btcsuite/btcd/commit/2cc19083f2b72b544c00dc2bc2ff59b01ba6d3c2"><code>2cc1908</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/btcsuite/btcd/issues/1894">#1894</a> from Roasbeef/musig2-1-0</li> <li><a href="https://github.com/btcsuite/btcd/commit/eef9fbc5c9f517d8bc03d79ce96854e151d735cf"><code>eef9fbc</code></a> btcec/schnorr/musig2: always pass in priv key for early nonce gen</li> <li><a href="https://github.com/btcsuite/btcd/commit/323871ff16408b4cb03c3f43faa3daa57541ee24"><code>323871f</code></a> btcec/musig2: remove old canned test vector code</li> <li><a href="https://github.com/btcsuite/btcd/commit/5d895bbea5fa186712f61c4cbcbfdccd6de1cda8"><code>5d895bb</code></a> btcec/schnorr/musig2: add sig combine test vectors</li> <li><a href="https://github.com/btcsuite/btcd/commit/ca28a98425aca171343ab6cb525ac3dbdf0bb397"><code>ca28a98</code></a> btcec/schnorr/musig2: add sig verify+sign test vectors</li> <li><a href="https://github.com/btcsuite/btcd/commit/cc12483f0aae6d8f5e08bac15ceb8309b6589c8c"><code>cc12483</code></a> btcec/schnorr/musig2: add key tweak sign test vectors</li> <li><a href="https://github.com/btcsuite/btcd/commit/4e55273815ee5d33969fc371742dc0e43cd30bd5"><code>4e55273</code></a> btcec/schnorr/musig2: update key agg test vectors to musig2 1.0.0</li> <li><a href="https://github.com/btcsuite/btcd/commit/3d9f4484dfd6d01d07cffa90498f7595467cc190"><code>3d9f448</code></a> btcec/schnorr/musig: update nonce test vectors to musig2 1.0.0</li> <li><a href="https://github.com/btcsuite/btcd/commit/1567f200557d22b81f0b5cdcf0a9986cb83445b2"><code>1567f20</code></a> btcec/schnorr/musig2: update to musig 1.0.0</li> <li><a href="https://github.com/btcsuite/btcd/commit/a34e7779163e159a41774e26778a2abf788620c0"><code>a34e777</code></a> btcec/schnorr/musig2: update musig2 impl to version 0.7.0</li> <li>Additional commits viewable in <a href="https://github.com/btcsuite/btcd/compare/btcec/v2.2.1...btcec/v2.3.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=github.com/btcsuite/btcd/btcec/v2&package-manager=go_modules&previous-version=2.2.1&new-version=2.3.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 27 October 2022, 11:50:20 UTC
82c29db Thane Thomson 26 October 2022, 21:04:28 UTC ci: Add Slack notifications when releases and pre-releases are cut (#9596) Automatically notify the team when pre-releases and releases are cut. [Pre-release notification rendered](https://app.slack.com/block-kit-builder/TREF53MTJ#%7B%22blocks%22:%5B%7B%22type%22:%22section%22,%22text%22:%7B%22type%22:%22mrkdwn%22,%22text%22:%22:sparkles:%20New%20Tendermint%20pre-release:%20%3Chttps://github.com/tendermint/tendermint/releases/tag/v0.37.0-rc1%7Cv0.37.0-rc1%3E%22%7D%7D%5D%7D) [Release notification rendered](https://app.slack.com/block-kit-builder/TREF53MTJ#%7B%22blocks%22:%5B%7B%22type%22:%22section%22,%22text%22:%7B%22type%22:%22mrkdwn%22,%22text%22:%22:rocket:%20New%20Tendermint%20release:%20%3Chttps://github.com/tendermint/tendermint/releases/tag/v0.34.22%7Cv0.34.22%3E%22%7D%7D%5D%7D) --- #### PR checklist - [x] Tests written/updated, or no tests needed - [x] `CHANGELOG_PENDING.md` updated, or no changelog entry needed - [x] Updated relevant documentation (`docs/`) and code comments, or no documentation updates needed 26 October 2022, 21:04:28 UTC
160a33f Thane Thomson 26 October 2022, 21:02:42 UTC ci: Only allow automated security-related dependency updates on release branches (#9600) At present we allow automated dependency updates on release branches via Dependabot. This seems fine for `main`, but is risky for release branches. This PR enables _daily_ checks for security-related dependency updates on release branches, but only performs automated non-security-related updates for `main` (weekly). --- #### PR checklist - [x] Tests written/updated, or no tests needed - [x] `CHANGELOG_PENDING.md` updated, or no changelog entry needed - [x] Updated relevant documentation (`docs/`) and code comments, or no documentation updates needed 26 October 2022, 21:02:42 UTC
13bd4b6 William Banfield 26 October 2022, 17:36:39 UTC github: remove forked version of gosec (#9629) 26 October 2022, 17:36:39 UTC
bc15531 dependabot[bot] 26 October 2022, 12:01:17 UTC build(deps): Bump docker/setup-buildx-action from 2.1.0 to 2.2.1 (#9612) 26 October 2022, 12:01:17 UTC
716a624 dependabot[bot] 26 October 2022, 11:48:19 UTC build(deps): Bump bufbuild/buf-setup-action from 1.8.0 to 1.9.0 (#9613) 26 October 2022, 11:48:19 UTC
58b9e4f dependabot[bot] 26 October 2022, 09:45:43 UTC build(deps): Bump github.com/bufbuild/buf from 1.8.0 to 1.9.0 (#9615) Bumps [github.com/bufbuild/buf](https://github.com/bufbuild/buf) from 1.8.0 to 1.9.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/bufbuild/buf/releases">github.com/bufbuild/buf's releases</a>.</em></p> <blockquote> <h2>v1.9.0</h2> <ul> <li> <p>New compiler that is faster and uses less memory than the outgoing one.</p> <ul> <li>When generating source code info, the new compiler is 20% faster, and allocates 13% less memory.</li> <li>If <em>not</em> generating source code info, the new compiler is 50% faster and allocates 35% less memory.</li> <li>In addition to allocating less memory through the course of a compilation, the new compiler releases some memory much earlier, allowing it to be garbage collected much sooner. This means that by the end of a very large compilation process, less than half as much memory is live/pinned to the heap, decreasing overall memory pressure.</li> </ul> <p>The new compiler also addresses a few bugs where Buf would accept proto sources that protoc would reject:</p> <ul> <li>In proto3 files, field and enum names undergo a validation that they are sufficiently different so that there will be no conflicts in JSON names.</li> <li>Fully-qualified names of elements (like a message, enum, or service) may not conflict with package names.</li> <li>A oneof or extend block may not contain empty statements.</li> <li>Package names may not be &gt;= 512 characters in length or contain &gt; 100 dots.</li> <li>Nesting depth of messages may not be &gt; 32.</li> <li>Field types and method input/output types may not refer to synthetic map entry messages.</li> </ul> </li> <li> <p>Push lint and breaking configuration to the registry.</p> </li> <li> <p>Include <code>LICENSE</code> file in the module on <code>buf push</code>.</p> </li> <li> <p>Formatter better edits/preserves whitespace around inline comments.</p> </li> <li> <p>Formatter correctly indents multi-line block (C-style) comments.</p> </li> <li> <p>Formatter now indents trailing comments at the end of an indented block body (including contents of message and array literals and elements in compact options) the same as the rest of the body (instead of out one level, like the closing punctuation).</p> </li> <li> <p>Formatter uses a compact, single-line representation for array and message literals in option values that are sufficiently simple (single scalar element or field).</p> </li> <li> <p><code>buf beta convert</code> flags have changed from <code>--input</code> to <code>--from</code> and <code>--output</code>/<code>-o</code> to <code>--to</code></p> </li> <li> <p>Fully qualified type names now must be passed to the <code>input</code> argument and <code>--type</code> flag separately</p> </li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/bufbuild/buf/blob/main/CHANGELOG.md">github.com/bufbuild/buf's changelog</a>.</em></p> <blockquote> <h2>[v1.9.0] - 2022-10-19</h2> <ul> <li> <p>New compiler that is faster and uses less memory than the outgoing one.</p> <ul> <li>When generating source code info, the new compiler is 20% faster, and allocates 13% less memory.</li> <li>If <em>not</em> generating source code info, the new compiler is 50% faster and allocates 35% less memory.</li> <li>In addition to allocating less memory through the course of a compilation, the new compiler releases some memory much earlier, allowing it to be garbage collected much sooner. This means that by the end of a very large compilation process, less than half as much memory is live/pinned to the heap, decreasing overall memory pressure.</li> </ul> <p>The new compiler also addresses a few bugs where Buf would accept proto sources that protoc would reject:</p> <ul> <li>In proto3 files, field and enum names undergo a validation that they are sufficiently different so that there will be no conflicts in JSON names.</li> <li>Fully-qualified names of elements (like a message, enum, or service) may not conflict with package names.</li> <li>A oneof or extend block may not contain empty statements.</li> <li>Package names may not be &gt;= 512 characters in length or contain &gt; 100 dots.</li> <li>Nesting depth of messages may not be &gt; 32.</li> <li>Field types and method input/output types may not refer to synthetic map entry messages.</li> </ul> </li> <li> <p>Push lint and breaking configuration to the registry.</p> </li> <li> <p>Include <code>LICENSE</code> file in the module on <code>buf push</code>.</p> </li> <li> <p>Formatter better edits/preserves whitespace around inline comments.</p> </li> <li> <p>Formatter correctly indents multi-line block (C-style) comments.</p> </li> <li> <p>Formatter now indents trailing comments at the end of an indented block body (including contents of message and array literals and elements in compact options) the same as the rest of the body (instead of out one level, like the closing punctuation).</p> </li> <li> <p>Formatter uses a compact, single-line representation for array and message literals in option values that are sufficiently simple (single scalar element or field).</p> </li> <li> <p><code>buf beta convert</code> flags have changed from <code>--input</code> to <code>--from</code> and <code>--output</code>/<code>-o</code> to <code>--to</code></p> </li> <li> <p>fully qualified type names now must be parsed to the <code>input</code> argument and <code>--type</code> flag separately</p> </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/bufbuild/buf/commit/0d39fac763025d6e86f7145d9836c9214a628c12"><code>0d39fac</code></a> Update to v1.9.0 (<a href="https://github-redirect.dependabot.com/bufbuild/buf/issues/1511">#1511</a>)</li> <li><a href="https://github.com/bufbuild/buf/commit/9033632c0f387f82fd120565e579524346c1e1da"><code>9033632</code></a> Update CHANGELOG.md (<a href="https://github-redirect.dependabot.com/bufbuild/buf/issues/1510">#1510</a>)</li> <li><a href="https://github.com/bufbuild/buf/commit/3bafb05ee5fd81dae3467639a06c3734d8f02e39"><code>3bafb05</code></a> Update CHANGELOG.md (<a href="https://github-redirect.dependabot.com/bufbuild/buf/issues/1501">#1501</a>)</li> <li><a href="https://github.com/bufbuild/buf/commit/ff03a69a0fcfaa620f4067b602755dd00c3e6430"><code>ff03a69</code></a> Use protocompile as the compiler (<a href="https://github-redirect.dependabot.com/bufbuild/buf/issues/1463">#1463</a>)</li> <li><a href="https://github.com/bufbuild/buf/commit/bda6cf66c4a97158ce6ec7d4d09cb4b0ff2b8585"><code>bda6cf6</code></a> avoid panic in OptionExtensionDescriptor (<a href="https://github-redirect.dependabot.com/bufbuild/buf/issues/1506">#1506</a>)</li> <li><a href="https://github.com/bufbuild/buf/commit/a39cbab60f20bed1e1754969b35983d922d8ff39"><code>a39cbab</code></a> BSR-578/Protobuf definition for updating metadata (<a href="https://github-redirect.dependabot.com/bufbuild/buf/issues/1483">#1483</a>)</li> <li><a href="https://github.com/bufbuild/buf/commit/e7889dcecf4c7e9391f72c0a184e03304884e9b7"><code>e7889dc</code></a> move convert command tests to where commands are tested (<a href="https://github-redirect.dependabot.com/bufbuild/buf/issues/1507">#1507</a>)</li> <li><a href="https://github.com/bufbuild/buf/commit/85bed0978099217d64f54fd066db6aeab5df8cc4"><code>85bed09</code></a> Change field option packed type to optional</li> <li><a href="https://github.com/bufbuild/buf/commit/760da6748b7d871b644bcad690f739b95d66b3a1"><code>760da67</code></a> bufmodule: test NewModuleForBucket (<a href="https://github-redirect.dependabot.com/bufbuild/buf/issues/1486">#1486</a>)</li> <li><a href="https://github.com/bufbuild/buf/commit/045f5685fc1ce5a31ace893f5e1d4aa1ed0756b5"><code>045f568</code></a> update makego and go dependencies (<a href="https://github-redirect.dependabot.com/bufbuild/buf/issues/1495">#1495</a>)</li> <li>Additional commits viewable in <a href="https://github.com/bufbuild/buf/compare/v1.8.0...v1.9.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=github.com/bufbuild/buf&package-manager=go_modules&previous-version=1.8.0&new-version=1.9.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 26 October 2022, 09:45:43 UTC
6a46a76 dependabot[bot] 26 October 2022, 09:14:58 UTC build(deps): Bump github.com/prometheus/client_model from 0.2.0 to 0.3.0 (#9617) 26 October 2022, 09:14:58 UTC
0d4db7a Callum Waters 26 October 2022, 08:31:06 UTC remove trust package (#9625) 26 October 2022, 08:31:06 UTC
40a59d1 dependabot[bot] 25 October 2022, 15:30:54 UTC build(deps): Bump github.com/stretchr/testify from 1.8.0 to 1.8.1 (#9614) 25 October 2022, 15:30:54 UTC
f670920 William Banfield 25 October 2022, 14:19:10 UTC e2e: configurable IP addresses for e2e testnet generator (#9592) * add the infrastructure types * add infra data to testnetload * extract infrastructure generation from manifest creation * add infrastructure type and data flags * rename docker ifd constructor * implement read ifd from file * add 'provider' field to the infrastructure data file to disable ip range check * return error from infrastructure from data file function * remove ifd from Setup * implement a basic infra provider with a simple setup command * remove misbehavior remnants * use manifest instead of file in all places * include cidr block range in the infrastructure data * nolint gosec * gosec * lint 25 October 2022, 14:19:10 UTC
2c40ca5 dependabot[bot] 25 October 2022, 14:06:35 UTC build(deps): Bump github.com/BurntSushi/toml from 1.2.0 to 1.2.1 (#9616) Bumps [github.com/BurntSushi/toml](https://github.com/BurntSushi/toml) from 1.2.0 to 1.2.1. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/BurntSushi/toml/releases">github.com/BurntSushi/toml's releases</a>.</em></p> <blockquote> <h2>v1.2.1</h2> <p>This release fixes the <code>omitempty</code> struct tag on an uncomparable type panicking.</p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/BurntSushi/toml/commit/74c008f3d2dcb9c295248aada067301a0d810932"><code>74c008f</code></a> Test Go 1.19; gofmt 1.19</li> <li><a href="https://github.com/BurntSushi/toml/commit/8de7f4a34c172a761a315154970f2ff5f2f32b0f"><code>8de7f4a</code></a> Update tests a little bit and add comment</li> <li><a href="https://github.com/BurntSushi/toml/commit/8bbca55db535f5fb9a35b0267dda7ba82c4ffd60"><code>8bbca55</code></a> add a check for uncomparable empty structs</li> <li><a href="https://github.com/BurntSushi/toml/commit/17ef72d8f765b7400d9a9b3cd3eba5028a2bcd84"><code>17ef72d</code></a> Tweak docs to use Go 1.19 syntax</li> <li><a href="https://github.com/BurntSushi/toml/commit/1ba7f5b05951c7331f4eefea9bce295e2cb141f2"><code>1ba7f5b</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/BurntSushi/toml/issues/367">#367</a> from zhsj/fix-32</li> <li><a href="https://github.com/BurntSushi/toml/commit/473c10f5a3a879603fb084c86a9a3b0508a85813"><code>473c10f</code></a> Fix test on 32 bit arch</li> <li><a href="https://github.com/BurntSushi/toml/commit/360c9e349664b57aac916a5c41aac8702b179c09"><code>360c9e3</code></a> Don't return error on uncomparable types: just silently ignore like before</li> <li><a href="https://github.com/BurntSushi/toml/commit/929b0a7b987e054a2d17a5ad552d054f82b91b2f"><code>929b0a7</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/BurntSushi/toml/issues/361">#361</a> from BurntSushi/p-omitempty</li> <li><a href="https://github.com/BurntSushi/toml/commit/8d9ffad36d84d870dd2d7740d5ecc6fd8626d3c8"><code>8d9ffad</code></a> Don't panic with 'omitempty' and uncomparable type</li> <li>See full diff in <a href="https://github.com/BurntSushi/toml/compare/v1.2.0...v1.2.1">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=github.com/BurntSushi/toml&package-manager=go_modules&previous-version=1.2.0&new-version=1.2.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 25 October 2022, 14:06:35 UTC
3136b7a Sergio Mena 25 October 2022, 10:44:55 UTC Revert `make proto-gen` in #9590 (#9621) 25 October 2022, 10:44:55 UTC
af2981a Rootul P 24 October 2022, 08:19:23 UTC docs: remove outdated comment (#9597) https://github.com/tendermint/tendermint/issues/8775 was resolved and backported so I think this comment is no longer applicable. 24 October 2022, 08:19:23 UTC
3bd2153 Rootul P 21 October 2022, 20:33:37 UTC docs: clarify `BlockIDFlag` variants (#9590) * docs: clarify BlockIDFlag variants * Update proto/tendermint/types/types.proto Co-authored-by: Sergio Mena <sergio@informal.systems> * Update proto/tendermint/types/types.proto Co-authored-by: Sergio Mena <sergio@informal.systems> * Update spec/core/data_structures.md Co-authored-by: Sergio Mena <sergio@informal.systems> * Update spec/core/data_structures.md Co-authored-by: Sergio Mena <sergio@informal.systems> * make proto-gen Co-authored-by: Sergio Mena <sergio@informal.systems> 21 October 2022, 20:33:37 UTC
301211c dependabot[bot] 19 October 2022, 21:49:06 UTC build(deps): Bump google.golang.org/grpc from 1.50.0 to 1.50.1 (#9567) Bumps [google.golang.org/grpc](https://github.com/grpc/grpc-go) from 1.50.0 to 1.50.1. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/grpc/grpc-go/releases">google.golang.org/grpc's releases</a>.</em></p> <blockquote> <h2>Release 1.50.1</h2> <p>New Features</p> <ul> <li>gcp/observability: support new configuration defined in public preview user guide</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/grpc/grpc-go/commit/4c776ec01572d55249df309251900554b46adb41"><code>4c776ec</code></a> Cherry-pick observability changes from master to v1.50.x and update version t...</li> <li><a href="https://github.com/grpc/grpc-go/commit/6576007e5601072d8ddf9a01720851cd12e2b7bc"><code>6576007</code></a> Change version to 1.50.1-dev (<a href="https://github-redirect.dependabot.com/grpc/grpc-go/issues/5686">#5686</a>)</li> <li>See full diff in <a href="https://github.com/grpc/grpc-go/compare/v1.50.0...v1.50.1">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=google.golang.org/grpc&package-manager=go_modules&previous-version=1.50.0&new-version=1.50.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 19 October 2022, 21:49:06 UTC
58ee42c dependabot[bot] 19 October 2022, 21:38:25 UTC build(deps): Bump github.com/spf13/cobra from 1.5.0 to 1.6.0 (#9566) Bumps [github.com/spf13/cobra](https://github.com/spf13/cobra) from 1.5.0 to 1.6.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/spf13/cobra/releases">github.com/spf13/cobra's releases</a>.</em></p> <blockquote> <h2>v1.6.0</h2> <h3>Summer 2022 Release</h3> <p>Some exciting changes make their way to Cobra! Command completions continue to get better and better (including adding <code>--help</code> and <code>--version</code> automatic flags to the completions list). Grouping is now possible in your help output as well! And you can now use the <code>OnFinalize</code> method to cleanup things when all &quot;work&quot; is done. Checkout the full changelog below:</p> <hr /> <h4>Features 🌠</h4> <ul> <li>Add groups for commands in help: <a href="https://github.com/aawsome"><code>@​aawsome</code></a> <a href="https://github.com/marckhouzam"><code>@​marckhouzam</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1003">#1003</a></li> <li>Support for case-insensitive command names: <a href="https://github.com/YuviGold"><code>@​YuviGold</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1802">#1802</a></li> <li>Expose <code>ValidateRequiredFlags</code> and <code>ValidateFlagGroups</code>: <a href="https://github.com/skeetwu"><code>@​skeetwu</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1760">#1760</a></li> <li>Add <code>--version</code> flag to help output: <a href="https://github.com/fnickels"><code>@​fnickels</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1707">#1707</a></li> <li>Add <code>--help</code> and <code>--version</code> flag in completions: <a href="https://github.com/marckhouzam"><code>@​marckhouzam</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1813">#1813</a></li> <li>Add <code>OnFinalize</code> method: <a href="https://github.com/yann-soubeyrand"><code>@​yann-soubeyrand</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1788">#1788</a></li> <li>Allow user to add completion for powershell alias: <a href="https://github.com/marckhouzam"><code>@​marckhouzam</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1621">#1621</a></li> <li>Make <code>InitDefaultcompletionCmd</code> public: <a href="https://github.com/gssbzn"><code>@​gssbzn</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1467">#1467</a></li> </ul> <h4>Deprecation 👎🏼</h4> <ul> <li><code>ExactValidArgs</code> is deprecated (but not being removed entirely). This is abit nuanced, so checkout <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1643">#1643</a> for further information and the <a href="https://github.com/spf13/cobra/blob/main/user_guide.md">updated <code>user_guide.md</code></a> on how this may affect you (and how you can take advantage of the <em>correct</em> behavior in the validators): <a href="https://github.com/umarcor"><code>@​umarcor</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1643">#1643</a></li> </ul> <h4>Bug fixes 🐛</h4> <ul> <li>Fix (bash-v2) <code>activeHelp</code> length check syntax: <a href="https://github.com/scop"><code>@​scop</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1762">#1762</a></li> <li>Fix correct command path in <code>see_also</code> for yaml documentation: <a href="https://github.com/zregvart"><code>@​zregvart</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1771">#1771</a></li> <li>Fix showing flags that shadow parent persistent flag in child help messaging: <a href="https://github.com/brianpursley"><code>@​brianpursley</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1776">#1776</a></li> </ul> <h4>Dependencies 🗳️</h4> <ul> <li>Upgrade to use <code>gopkg.in/yaml.v3</code>: <a href="https://github.com/tklauser"><code>@​tklauser</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1766">#1766</a></li> </ul> <h4>Testing 🤔</h4> <ul> <li>Test on Golang 1.19: <a href="https://github.com/umarcor"><code>@​umarcor</code></a> &amp; <a href="https://github.com/jpmcb"><code>@​jpmcb</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1782">#1782</a></li> <li>Renamed powershell completion tests: <a href="https://github.com/marckhouzam"><code>@​marckhouzam</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1803">#1803</a></li> <li>Use <code>action/setup-go</code> cache: <a href="https://github.com/umarcor"><code>@​umarcor</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1783">#1783</a></li> <li>Add <code>workflow_dispatch</code> to CI actions: <a href="https://github.com/umarcor"><code>@​umarcor</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1387">#1387</a></li> <li>Add minimum GitHub token permissions for workflows: <a href="https://github.com/varunsh-coder"><code>@​varunsh-coder</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1792">#1792</a></li> </ul> <h4>Docs ✏️</h4> <ul> <li>Fixup spelling for GitHub CLI: <a href="https://github.com/eltociear"><code>@​eltociear</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1744">#1744</a></li> <li>Clarify <code>SetContext</code> documentation: <a href="https://github.com/katexochen"><code>@​katexochen</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1748">#1748</a></li> <li>Instruct user to <code>go install</code> for binary: <a href="https://github.com/marckhouzam"><code>@​marckhouzam</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1726">#1726</a></li> <li>User guide cleanup: <a href="https://github.com/marckhouzam"><code>@​marckhouzam</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1656">#1656</a></li> <li>Document option to hide the default completion command: <a href="https://github.com/marckhouzam"><code>@​marckhouzam</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1779">#1779</a></li> </ul> <h4>Misc 💭</h4> <ul> <li>Add KubeVirt, CloudQuery, Cilium, Okteto, Zitadel, Allero to projects using cobra: <a href="https://github.com/maiqueb"><code>@​maiqueb</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1741">#1741</a>, <a href="https://github.com/yevgenypats"><code>@​yevgenypats</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1742">#1742</a>, <a href="https://github.com/tklauser"><code>@​tklauser</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1745">#1745</a>, <a href="https://github.com/jLopezbarb"><code>@​jLopezbarb</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1759">#1759</a>, <a href="https://github.com/fforootd"><code>@​fforootd</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1772">#1772</a>, <a href="https://github.com/dimabru"><code>@​dimabru</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1819">#1819</a></li> <li>Use correct stale action <code>exempt</code> yaml keys: <a href="https://github.com/jpmcb"><code>@​jpmcb</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1800">#1800</a></li> <li>Add missing license headers: <a href="https://github.com/umarcor"><code>@​umarcor</code></a> <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1809">#1809</a></li> </ul> <p><em>Note:</em> Per <a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1804">#1804</a>, we will be moving away from &quot;seasonal&quot; releases and doing more generic point release targets. Continue to track the milestones and issues in the <code>spf13/cobra</code> GitHub repository for more information!</p> <p>Great work everyone! Cobra would never be possible without your contributions! 🐍</p> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/spf13/cobra/commit/860791844ed3a2e544a9b9bbbcb14144a948ad20"><code>8607918</code></a> feat: make InitDefaultCompletionCmd public (<a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1467">#1467</a>)</li> <li><a href="https://github.com/spf13/cobra/commit/2169adb5749372c64cdd303864ae8a444da6350f"><code>2169adb</code></a> Add groups for commands in help (<a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1003">#1003</a>)</li> <li><a href="https://github.com/spf13/cobra/commit/212ea4078323771dc49b6f25a41d84efbaac3a4c"><code>212ea40</code></a> Include --help and --version flag in completion (<a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1813">#1813</a>)</li> <li><a href="https://github.com/spf13/cobra/commit/d4040ad8dbc351b7eb88b2ffcff6f3642bce8ce1"><code>d4040ad</code></a> Allow user to add completion for powershell alias (<a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1621">#1621</a>)</li> <li><a href="https://github.com/spf13/cobra/commit/23fc5e099f7bb8b8f979e3928cb1078b9c939daa"><code>23fc5e0</code></a> ci: add minimum GitHub token permissions for workflows (<a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1792">#1792</a>)</li> <li><a href="https://github.com/spf13/cobra/commit/93d1913fb03362f97e95aeacc7d1541764cafc2f"><code>93d1913</code></a> Add OnFinalize method (<a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1788">#1788</a>)</li> <li><a href="https://github.com/spf13/cobra/commit/07034fee4995578a771c4185dab38cc16ac3f420"><code>07034fe</code></a> build(deps): bump actions/stale from 5 to 6 (<a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1815">#1815</a>)</li> <li><a href="https://github.com/spf13/cobra/commit/3dc9761b36e8975006cd9b47d3b55b9751050a1e"><code>3dc9761</code></a> Add allero to list of projects using cobra (<a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1819">#1819</a>)</li> <li><a href="https://github.com/spf13/cobra/commit/7039e1fa214cfc1de404ed6540158c8fda64a758"><code>7039e1f</code></a> Add '--version' flag to Help output (<a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1707">#1707</a>)</li> <li><a href="https://github.com/spf13/cobra/commit/fce8d8aeb08dc6afe413cc0af67a7fbb3cffec4c"><code>fce8d8a</code></a> Expose ValidateRequiredFlags and ValidateFlagGroups (<a href="https://github-redirect.dependabot.com/spf13/cobra/issues/1760">#1760</a>)</li> <li>Additional commits viewable in <a href="https://github.com/spf13/cobra/compare/v1.5.0...v1.6.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=github.com/spf13/cobra&package-manager=go_modules&previous-version=1.5.0&new-version=1.6.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 19 October 2022, 21:38:25 UTC
6e38fff dependabot[bot] 19 October 2022, 21:29:43 UTC build(deps): Bump docker/login-action from 2.0.0 to 2.1.0 (#9565) Bumps [docker/login-action](https://github.com/docker/login-action) from 2.0.0 to 2.1.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/docker/login-action/releases">docker/login-action's releases</a>.</em></p> <blockquote> <h2>v2.1.0</h2> <h2>What's Changed</h2> <ul> <li>Ensure AWS temp credentials are redacted in workflow logs by <a href="https://github.com/crazy-max"><code>@​crazy-max</code></a> (<a href="https://github-redirect.dependabot.com/docker/login-action/issues/275">#275</a>)</li> <li>Bump <code>@​actions/core</code> from 1.6.0 to 1.10.0 (<a href="https://github-redirect.dependabot.com/docker/login-action/issues/252">#252</a> <a href="https://github-redirect.dependabot.com/docker/login-action/issues/292">#292</a>)</li> <li>Bump <code>@​aws-sdk/client-ecr</code> from 3.53.0 to 3.186.0 (<a href="https://github-redirect.dependabot.com/docker/login-action/issues/298">#298</a>)</li> <li>Bump <code>@​aws-sdk/client-ecr-public</code> from 3.53.0 to 3.186.0 (<a href="https://github-redirect.dependabot.com/docker/login-action/issues/299">#299</a>)</li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/docker/login-action/compare/v2.0.0...v2.1.0">https://github.com/docker/login-action/compare/v2.0.0...v2.1.0</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/docker/login-action/commit/f4ef78c080cd8ba55a85445d5b36e214a81df20a"><code>f4ef78c</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/docker/login-action/issues/299">#299</a> from docker/dependabot/npm_and_yarn/aws-sdk/client-ec...</li> <li><a href="https://github.com/docker/login-action/commit/9ad4ce3929bc07d004540e2ebe754234848335e2"><code>9ad4ce3</code></a> Update generated content</li> <li><a href="https://github.com/docker/login-action/commit/884eadd4f88fc6034a7a1ba10fbd2fd69404b94b"><code>884eadd</code></a> Bump <code>@​aws-sdk/client-ecr-public</code> from 3.53.0 to 3.186.0</li> <li><a href="https://github.com/docker/login-action/commit/a266232f5c33001624fdfca7a1d9e5c5612a20ac"><code>a266232</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/docker/login-action/issues/298">#298</a> from docker/dependabot/npm_and_yarn/aws-sdk/client-ec...</li> <li><a href="https://github.com/docker/login-action/commit/f97efcfbf9cb420547dae40adf642fc2366c979a"><code>f97efcf</code></a> Update generated content</li> <li><a href="https://github.com/docker/login-action/commit/5ae789beac0ced16338cc5996b168a5785de8ae9"><code>5ae789b</code></a> Bump <code>@​aws-sdk/client-ecr</code> from 3.53.0 to 3.186.0</li> <li><a href="https://github.com/docker/login-action/commit/71c23b5b3471683fb0acf7a6c821f834735aec44"><code>71c23b5</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/docker/login-action/issues/292">#292</a> from docker/dependabot/npm_and_yarn/actions/core-1.10.0</li> <li><a href="https://github.com/docker/login-action/commit/6401d70aab8811e905cbf52b0eae2c58bc274b5b"><code>6401d70</code></a> Update generated content</li> <li><a href="https://github.com/docker/login-action/commit/67e8909cc694e896d07b96876522f898972abbfd"><code>67e8909</code></a> Bump <code>@​actions/core</code> from 1.9.1 to 1.10.0</li> <li><a href="https://github.com/docker/login-action/commit/21f251affc0769ccac8a1cf17e937592fb492337"><code>21f251a</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/docker/login-action/issues/275">#275</a> from crazy-max/redact-aws-creds</li> <li>Additional commits viewable in <a href="https://github.com/docker/login-action/compare/v2.0.0...v2.1.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=docker/login-action&package-manager=github_actions&previous-version=2.0.0&new-version=2.1.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 19 October 2022, 21:29:43 UTC
93ab364 dependabot[bot] 19 October 2022, 21:28:32 UTC build(deps): Bump slackapi/slack-github-action from 1.22.0 to 1.23.0 (#9564) Bumps [slackapi/slack-github-action](https://github.com/slackapi/slack-github-action) from 1.22.0 to 1.23.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/slackapi/slack-github-action/releases">slackapi/slack-github-action's releases</a>.</em></p> <blockquote> <h2>Slack Send V1.23.0</h2> <h2>What's Changed</h2> <ul> <li>Bump node from 12 to 16 by <a href="https://github.com/quinnjn"><code>@​quinnjn</code></a> in <a href="https://github-redirect.dependabot.com/slackapi/slack-github-action/pull/128">slackapi/slack-github-action#128</a></li> <li>Bump eslint from 8.23.0 to 8.24.0 by <a href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a href="https://github-redirect.dependabot.com/slackapi/slack-github-action/pull/135">slackapi/slack-github-action#135</a></li> <li>Bump <code>@​actions/core</code> from 1.9.1 to 1.10.0 by <a href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a href="https://github-redirect.dependabot.com/slackapi/slack-github-action/pull/134">slackapi/slack-github-action#134</a></li> <li>Bump <code>@​actions/github</code> from 5.0.3 to 5.1.1 by <a href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a href="https://github-redirect.dependabot.com/slackapi/slack-github-action/pull/133">slackapi/slack-github-action#133</a></li> <li>Use https proxy agent by <a href="https://github.com/EHitchcockIAG"><code>@​EHitchcockIAG</code></a> in <a href="https://github-redirect.dependabot.com/slackapi/slack-github-action/pull/132">slackapi/slack-github-action#132</a></li> <li>Release v1.23.0 by <a href="https://github.com/hello-ashleyintech"><code>@​hello-ashleyintech</code></a> in <a href="https://github-redirect.dependabot.com/slackapi/slack-github-action/pull/139">slackapi/slack-github-action#139</a></li> </ul> <h2>New Contributors</h2> <ul> <li><a href="https://github.com/quinnjn"><code>@​quinnjn</code></a> made their first contribution in <a href="https://github-redirect.dependabot.com/slackapi/slack-github-action/pull/128">slackapi/slack-github-action#128</a></li> <li><a href="https://github.com/EHitchcockIAG"><code>@​EHitchcockIAG</code></a> made their first contribution in <a href="https://github-redirect.dependabot.com/slackapi/slack-github-action/pull/132">slackapi/slack-github-action#132</a></li> <li><a href="https://github.com/hello-ashleyintech"><code>@​hello-ashleyintech</code></a> made their first contribution in <a href="https://github-redirect.dependabot.com/slackapi/slack-github-action/pull/139">slackapi/slack-github-action#139</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/slackapi/slack-github-action/compare/v1.22.0...v1.23.0">https://github.com/slackapi/slack-github-action/compare/v1.22.0...v1.23.0</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/slackapi/slack-github-action/commit/007b2c3c751a190b6f0f040e47ed024deaa72844"><code>007b2c3</code></a> Automatic compilation</li> <li><a href="https://github.com/slackapi/slack-github-action/commit/60532b08440640e81b9241aa38a57d95ddaa5693"><code>60532b0</code></a> Release v1.23.0 (<a href="https://github-redirect.dependabot.com/slackapi/slack-github-action/issues/139">#139</a>)</li> <li><a href="https://github.com/slackapi/slack-github-action/commit/acb114ffb5579419fcd58ce2b3ab7f96b019c72f"><code>acb114f</code></a> Use https proxy agent (<a href="https://github-redirect.dependabot.com/slackapi/slack-github-action/issues/132">#132</a>)</li> <li><a href="https://github.com/slackapi/slack-github-action/commit/0ae8044e6f4bda8d748e93c8d8fbc1d4a3b63f39"><code>0ae8044</code></a> Improve README to clearly mention a channel ID is required for updating messages</li> <li><a href="https://github.com/slackapi/slack-github-action/commit/71bf093cd307dcc8678be6828cff8f4b8e4b2db0"><code>71bf093</code></a> Bump <code>@​actions/github</code> from 5.0.3 to 5.1.1 (<a href="https://github-redirect.dependabot.com/slackapi/slack-github-action/issues/133">#133</a>)</li> <li><a href="https://github.com/slackapi/slack-github-action/commit/9dba6b6137b6402046f9ce8c2e8d665ab2872dc3"><code>9dba6b6</code></a> Bump <code>@​actions/core</code> from 1.9.1 to 1.10.0 (<a href="https://github-redirect.dependabot.com/slackapi/slack-github-action/issues/134">#134</a>)</li> <li><a href="https://github.com/slackapi/slack-github-action/commit/7190fb233e475abadf69e73b1ee0846b8410f1e8"><code>7190fb2</code></a> Bump eslint from 8.23.0 to 8.24.0 (<a href="https://github-redirect.dependabot.com/slackapi/slack-github-action/issues/135">#135</a>)</li> <li><a href="https://github.com/slackapi/slack-github-action/commit/a764c057f3667abde4c57b733b27840e10acecf1"><code>a764c05</code></a> Bump node from 12 to 16 (<a href="https://github-redirect.dependabot.com/slackapi/slack-github-action/issues/128">#128</a>)</li> <li><a href="https://github.com/slackapi/slack-github-action/commit/eb1a153fadd2fb3c2b13f11086096b958c4495e3"><code>eb1a153</code></a> Add language to the maintainers guide about milestone management.</li> <li>See full diff in <a href="https://github.com/slackapi/slack-github-action/compare/v1.22.0...v1.23.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=slackapi/slack-github-action&package-manager=github_actions&previous-version=1.22.0&new-version=1.23.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 19 October 2022, 21:28:32 UTC
1c60efc dependabot[bot] 19 October 2022, 21:27:11 UTC build(deps): Bump styfle/cancel-workflow-action from 0.10.1 to 0.11.0 (#9561) Bumps [styfle/cancel-workflow-action](https://github.com/styfle/cancel-workflow-action) from 0.10.1 to 0.11.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/styfle/cancel-workflow-action/releases">styfle/cancel-workflow-action's releases</a>.</em></p> <blockquote> <h2>0.11.0</h2> <h3>Minor Changes</h3> <ul> <li>Update to Node 16: <a href="https://github-redirect.dependabot.com/styfle/cancel-workflow-action/issues/186">#186</a></li> <li>Chore: rebuild: 1e0e690cd3756927cda56ad0033137ff1268c477</li> <li>Chore(deps-dev): bump typescript from 4.8.3 to 4.8.4: <a href="https://github-redirect.dependabot.com/styfle/cancel-workflow-action/issues/181">#181</a></li> <li>Chore(deps): bump <code>@​actions/github</code> from 5.1.0 to 5.1.1: <a href="https://github-redirect.dependabot.com/styfle/cancel-workflow-action/issues/182">#182</a></li> <li>Chore(deps): bump <code>@​actions/core</code> from 1.9.1 to 1.10.0: <a href="https://github-redirect.dependabot.com/styfle/cancel-workflow-action/issues/183">#183</a></li> </ul> <h3>Credits</h3> <p>Huge thanks to <a href="https://github.com/mattjohnsonpint"><code>@​mattjohnsonpint</code></a> for helping!</p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/styfle/cancel-workflow-action/commit/b173b6ec0100793626c2d9e6b90435061f4fc3e5"><code>b173b6e</code></a> 0.11.0</li> <li><a href="https://github.com/styfle/cancel-workflow-action/commit/1e0e690cd3756927cda56ad0033137ff1268c477"><code>1e0e690</code></a> chore: rebuild</li> <li><a href="https://github.com/styfle/cancel-workflow-action/commit/4e668e5dc322d61817bde42d6129da4c694eea11"><code>4e668e5</code></a> Update to Node 16 (<a href="https://github-redirect.dependabot.com/styfle/cancel-workflow-action/issues/186">#186</a>)</li> <li><a href="https://github.com/styfle/cancel-workflow-action/commit/f78dcd888e10edaadffa867cb225a0db55007f9b"><code>f78dcd8</code></a> chore(deps): bump <code>@​actions/core</code> from 1.9.1 to 1.10.0 (<a href="https://github-redirect.dependabot.com/styfle/cancel-workflow-action/issues/183">#183</a>)</li> <li><a href="https://github.com/styfle/cancel-workflow-action/commit/6b6782c03d0135287ddb07d261711f9baacc0913"><code>6b6782c</code></a> chore(deps): bump <code>@​actions/github</code> from 5.1.0 to 5.1.1 (<a href="https://github-redirect.dependabot.com/styfle/cancel-workflow-action/issues/182">#182</a>)</li> <li><a href="https://github.com/styfle/cancel-workflow-action/commit/1a300fe93c43ece33271d25d7dee65b8f7731839"><code>1a300fe</code></a> chore(deps-dev): bump typescript from 4.8.3 to 4.8.4 (<a href="https://github-redirect.dependabot.com/styfle/cancel-workflow-action/issues/181">#181</a>)</li> <li>See full diff in <a href="https://github.com/styfle/cancel-workflow-action/compare/0.10.1...0.11.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=styfle/cancel-workflow-action&package-manager=github_actions&previous-version=0.10.1&new-version=0.11.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 19 October 2022, 21:27:11 UTC
6768b98 dependabot[bot] 19 October 2022, 21:25:52 UTC build(deps): Bump docker/setup-buildx-action from 2.0.0 to 2.1.0 (#9563) Bumps [docker/setup-buildx-action](https://github.com/docker/setup-buildx-action) from 2.0.0 to 2.1.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/docker/setup-buildx-action/releases">docker/setup-buildx-action's releases</a>.</em></p> <blockquote> <h2>v2.1.0</h2> <h2>What's Changed</h2> <ul> <li>Auth support for tls endpoint by <a href="https://github.com/crazy-max"><code>@​crazy-max</code></a> (<a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/164">#164</a>)</li> <li>Nodes metadata JSON ouput by <a href="https://github.com/crazy-max"><code>@​crazy-max</code></a> (<a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/162">#162</a>) <ul> <li><code>endpoint</code>, <code>status</code> and <code>flags</code> outputs are deprecated. Use <code>nodes</code> output instead.</li> </ul> </li> <li>Skip setting buildkitd flags and config for remote driver by <a href="https://github.com/crazy-max"><code>@​crazy-max</code></a> (<a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/161">#161</a>)</li> <li>Move args logic to context module and add tests by <a href="https://github.com/crazy-max"><code>@​crazy-max</code></a> (<a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/169">#169</a>)</li> <li>Remove workaround for <code>setOutput</code> by <a href="https://github.com/crazy-max"><code>@​crazy-max</code></a> (<a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/170">#170</a>)</li> <li>Fix deprecated <code>fs.rmdir</code> by <a href="https://github.com/crazy-max"><code>@​crazy-max</code></a> (<a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/171">#171</a>)</li> <li>Docs: clarify install option by <a href="https://github.com/rodrigc"><code>@​rodrigc</code></a> in (<a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/152">#152</a>)</li> <li>Bump <code>@​actions/core</code> from 1.6.0 to 1.10.0 (<a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/151">#151</a> <a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/157">#157</a> <a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/167">#167</a>)</li> <li>Bump <code>@​actions/tool-cache</code> from 1.7.2 to 2.0.1 (<a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/150">#150</a>)</li> <li>Bump <code>@​actions/http-client</code> from 1.0.11 to 2.0.1 (<a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/149">#149</a>)</li> <li>Bump uuid from 8.3.2 to 9.0.0 (<a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/159">#159</a>)</li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/docker/setup-buildx-action/compare/v2.0.0...v2.1.0">https://github.com/docker/setup-buildx-action/compare/v2.0.0...v2.1.0</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/docker/setup-buildx-action/commit/95cb08cb2672c73d4ffd2f422e6d11953d2a9c70"><code>95cb08c</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/171">#171</a> from crazy-max/rmsync</li> <li><a href="https://github.com/docker/setup-buildx-action/commit/eb5c2a6eeae6f46e63ee461dabd0b1617de25ec5"><code>eb5c2a6</code></a> Fix deprecated fs.rmdir</li> <li><a href="https://github.com/docker/setup-buildx-action/commit/83612bea36a38592c0852c00a3c3597f1eeec257"><code>83612be</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/170">#170</a> from crazy-max/setOutput</li> <li><a href="https://github.com/docker/setup-buildx-action/commit/40fefd8a58d8d96fec8ac78e02c3e525d4ff3453"><code>40fefd8</code></a> Remove workaround for setOutput</li> <li><a href="https://github.com/docker/setup-buildx-action/commit/90a1e4619e9c0444b0b549de1737f4df8df24f8f"><code>90a1e46</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/169">#169</a> from crazy-max/context-module</li> <li><a href="https://github.com/docker/setup-buildx-action/commit/5a9fc405758950b77ecd0108de66eaf98e6e60bc"><code>5a9fc40</code></a> move args logic to context module and add tests</li> <li><a href="https://github.com/docker/setup-buildx-action/commit/6c48dad5f09ec0ab0892a98158d3ecc6504008ea"><code>6c48dad</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/159">#159</a> from docker/dependabot/npm_and_yarn/uuid-9.0.0</li> <li><a href="https://github.com/docker/setup-buildx-action/commit/16c2ddbfa762b44ed004646a6e933912595f55f9"><code>16c2ddb</code></a> update generated content</li> <li><a href="https://github.com/docker/setup-buildx-action/commit/0fe8589bf44bd9243a334331d06443de900bb9a2"><code>0fe8589</code></a> Bump uuid from 8.3.2 to 9.0.0</li> <li><a href="https://github.com/docker/setup-buildx-action/commit/f3692cbe433bdedc0d6300c45d643177842f52b7"><code>f3692cb</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/docker/setup-buildx-action/issues/167">#167</a> from docker/dependabot/npm_and_yarn/actions/core-1.10.0</li> <li>Additional commits viewable in <a href="https://github.com/docker/setup-buildx-action/compare/v2.0.0...v2.1.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=docker/setup-buildx-action&package-manager=github_actions&previous-version=2.0.0&new-version=2.1.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 19 October 2022, 21:25:52 UTC
3cdfbda dependabot[bot] 19 October 2022, 21:24:16 UTC build(deps): Bump docker/build-push-action from 3.1.1 to 3.2.0 (#9562) Bumps [docker/build-push-action](https://github.com/docker/build-push-action) from 3.1.1 to 3.2.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/docker/build-push-action/releases">docker/build-push-action's releases</a>.</em></p> <blockquote> <h2>v3.2.0</h2> <h2>What's Changed</h2> <ul> <li>Remove workaround for <code>setOutput</code> by <a href="https://github.com/crazy-max"><code>@​crazy-max</code></a> (<a href="https://github-redirect.dependabot.com/docker/build-push-action/issues/704">#704</a>)</li> <li>Docs: fix Git context link and add more details about subdir support by <a href="https://github.com/crazy-max"><code>@​crazy-max</code></a> (<a href="https://github-redirect.dependabot.com/docker/build-push-action/issues/685">#685</a>)</li> <li>Docs: named context by <a href="https://github.com/baibaratsky"><code>@​baibaratsky</code></a> and <a href="https://github.com/crazy-max"><code>@​crazy-max</code></a> (<a href="https://github-redirect.dependabot.com/docker/build-push-action/issues/665">#665</a>)</li> <li>Bump <code>@​actions/core</code> from 1.9.0 to 1.10.0 (<a href="https://github-redirect.dependabot.com/docker/build-push-action/issues/667">#667</a> <a href="https://github-redirect.dependabot.com/docker/build-push-action/issues/695">#695</a>)</li> <li>Bump <code>@​actions/github</code> from 5.0.3 to 5.1.1 (<a href="https://github-redirect.dependabot.com/docker/build-push-action/issues/696">#696</a>)</li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/docker/build-push-action/compare/v3.1.1...v3.2.0">https://github.com/docker/build-push-action/compare/v3.1.1...v3.2.0</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/docker/build-push-action/commit/c56af957549030174b10d6867f20e78cfd7debc5"><code>c56af95</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/docker/build-push-action/issues/704">#704</a> from crazy-max/setOutput</li> <li><a href="https://github.com/docker/build-push-action/commit/75aaa63262c61b07bea51f366dc4ac9b99562fe2"><code>75aaa63</code></a> Remove workaround for setOutput</li> <li><a href="https://github.com/docker/build-push-action/commit/f97d6e28502c8746b733983684d72fa7aa55e591"><code>f97d6e2</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/docker/build-push-action/issues/700">#700</a> from crazy-max/update-docs</li> <li><a href="https://github.com/docker/build-push-action/commit/47c00d78bfb0dbb514c150a184f4336e812147a6"><code>47c00d7</code></a> ci: secret job to check for invalid secrets</li> <li><a href="https://github.com/docker/build-push-action/commit/871b930e7a4dec810558105aa88b244f705f3529"><code>871b930</code></a> docs: update links and layout</li> <li><a href="https://github.com/docker/build-push-action/commit/105bf59b00f9b5bec960a9498145073428a3ec7b"><code>105bf59</code></a> docs: copy between registries with buildx</li> <li><a href="https://github.com/docker/build-push-action/commit/48888e0b1305dca3a741ceb3b5a04ea336cd2626"><code>48888e0</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/docker/build-push-action/issues/699">#699</a> from crazy-max/docs-outputs</li> <li><a href="https://github.com/docker/build-push-action/commit/6b820ad47e852ec2f9347594c76cc4ecdbcf1ec2"><code>6b820ad</code></a> docs: note about multiple outputs</li> <li><a href="https://github.com/docker/build-push-action/commit/e1a10350ee85060d246eaf050ae1561f55e73aeb"><code>e1a1035</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/docker/build-push-action/issues/665">#665</a> from baibaratsky/patch-1</li> <li><a href="https://github.com/docker/build-push-action/commit/0f5a7d48d5bf7b6abae4f9325152dee483752fd3"><code>0f5a7d4</code></a> docs: named contexts</li> <li>Additional commits viewable in <a href="https://github.com/docker/build-push-action/compare/v3.1.1...v3.2.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=docker/build-push-action&package-manager=github_actions&previous-version=3.1.1&new-version=3.2.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 19 October 2022, 21:24:16 UTC
4552cfc Thane Thomson 19 October 2022, 15:25:03 UTC Update changelog with v0.34.22 entry (#9588) Adds the changelog entry from #9583 to the changelog on `main`. --- #### PR checklist - [x] Tests written/updated, or no tests needed - [x] `CHANGELOG_PENDING.md` updated, or no changelog entry needed - [x] Updated relevant documentation (`docs/`) and code comments, or no documentation updates needed 19 October 2022, 15:25:03 UTC
91fba07 Sergio Mena 19 October 2022, 09:16:52 UTC Fix some broken links in docs (#9579) Some links that the linter found as broken are replaced by working ones that point to the same contents --- #### PR checklist - [x] Tests written/updated, or no tests needed - [x] `CHANGELOG_PENDING.md` updated, or no changelog entry needed - [x] Updated relevant documentation (`docs/`) and code comments, or no documentation updates needed 19 October 2022, 09:16:52 UTC
5df9c41 Sergio Mena 18 October 2022, 16:02:24 UTC Fix tested version in 200 node test + added prometheus problem as found during QA (#9582) 18 October 2022, 16:02:24 UTC
c8f2032 Rootul P 18 October 2022, 14:08:55 UTC fix: header link (#9574) Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com> 18 October 2022, 14:08:55 UTC
b06e1ce Sergio Mena 17 October 2022, 20:08:51 UTC QA Process report for v0.37.x (and baseline for v0.34.x) (#9499) * 1st version. 200 nodes. Missing rotating node * Small fixes * Addressed @jmalicevic's comment * Explain in method how to set the tmint version to test. Improve result section * 1st version of how to run the 'rotating node' testnet * Apply suggestions from @williambanfield Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com> * Addressed @williambanfield's comments * Added reference to Unix load metric * Added total TXs * Fixed some 'png's that got swapped. Excluded '.*-node-exporter' processes from memory plots * Report for rotating node * Adressed remaining comments from @williambanfield * Cosmetic * Addressed some of @thanethomson's comments * Re-executed the 200 node tests and updated the corresponding sections of the report * Ignore Python virtualenv directories Signed-off-by: Thane Thomson <connect@thanethomson.com> * Add latency vs throughput script Signed-off-by: Thane Thomson <connect@thanethomson.com> * Add README for latency vs throughput script Signed-off-by: Thane Thomson <connect@thanethomson.com> * Fix local links to folders Signed-off-by: Thane Thomson <connect@thanethomson.com> * v034: only have one level-1 heading Signed-off-by: Thane Thomson <connect@thanethomson.com> * Adjust headings Signed-off-by: Thane Thomson <connect@thanethomson.com> * v0.37.x: add links to issues/PRs Signed-off-by: Thane Thomson <connect@thanethomson.com> * v0.37.x: add note about bug being present in v0.34 Signed-off-by: Thane Thomson <connect@thanethomson.com> * method: adjust heading depths Signed-off-by: Thane Thomson <connect@thanethomson.com> * Show data points on latency vs throughput plot Signed-off-by: Thane Thomson <connect@thanethomson.com> * Add latency vs throughput plots Signed-off-by: Thane Thomson <connect@thanethomson.com> * Correct mentioning of v0.34.21 and add heading Signed-off-by: Thane Thomson <connect@thanethomson.com> * Refactor latency vs throughput script Update the latency vs throughput script to rather generate plots from the "raw" CSV output from the loadtime reporting tool as opposed to the separated CSV files from the experimental method. Also update the relevant documentation, and regenerate the images from the raw CSV data (resulting in pretty much the same plots as the previous ones). Signed-off-by: Thane Thomson <connect@thanethomson.com> * Remove unused default duration const Signed-off-by: Thane Thomson <connect@thanethomson.com> * Adjust experiment start time to be more accurate and re-plot latency vs throughput Signed-off-by: Thane Thomson <connect@thanethomson.com> * Addressed @williambanfield's comments * Apply suggestions from code review Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com> * Apply suggestions from code review Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com> * scripts: Update latency vs throughput readme for clarity Signed-off-by: Thane Thomson <connect@thanethomson.com> Signed-off-by: Thane Thomson <connect@thanethomson.com> Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com> Co-authored-by: Thane Thomson <connect@thanethomson.com> 17 October 2022, 20:08:51 UTC
6ea968d Thane Thomson 17 October 2022, 11:42:08 UTC ci: Update Slack nightly failure messages (#9551) It's mostly not true that a particular commit _caused_ a failure, so I've changed the wording here. --- #### PR checklist - [x] Tests written/updated, or no tests needed - [x] `CHANGELOG_PENDING.md` updated, or no changelog entry needed - [x] Updated relevant documentation (`docs/`) and code comments, or no documentation updates needed 17 October 2022, 11:42:08 UTC
b42c439 Sergio Mena 12 October 2022, 17:58:50 UTC Fix TX payload for DO testnets (#9540) * Added print * Fix unmarshall * Fix unmarshalling * Simplified steps to unmarshall * minor * Use 'encoding/hex' * Forget about C, this is Go! * gosec warning * Set maximum payload size * nosec annotation 12 October 2022, 17:58:50 UTC
387bf67 omahs 11 October 2022, 11:54:03 UTC Fix: typos (#9536) * Fix: typos Fix: typos * Fix: minor typo Fix: minor typo 11 October 2022, 11:54:03 UTC
4f3e87b Sergio Mena 10 October 2022, 14:21:06 UTC Add changelog entry (#9535) 10 October 2022, 14:21:06 UTC
a371b1e William Banfield 10 October 2022, 12:58:24 UTC blocksync: retry requests after timeout (#9518) * blocksync: retry requests after timeout * Minimize changes to re-send block request after timeout * TO REVERT: reduce queue capacity * Add reset * Revert "TO REVERT: reduce queue capacity" This reverts commit dd0fee56924c958bed2ab7733e1917eb88fb5957. * 30 seconds * don't reset the timer * Update blocksync/pool.go Co-authored-by: Callum Waters <cmwaters19@gmail.com> Co-authored-by: Sergio Mena <sergio@informal.systems> Co-authored-by: Callum Waters <cmwaters19@gmail.com> 10 October 2022, 12:58:24 UTC
9dd99e9 dependabot[bot] 10 October 2022, 08:59:44 UTC build(deps): Bump google.golang.org/grpc from 1.49.0 to 1.50.0 (#9529) 10 October 2022, 08:59:44 UTC
4fd19a2 Callum Waters 07 October 2022, 13:54:44 UTC indexer: move deduplication functionality purely to the kvindexer (#9473) 07 October 2022, 13:54:44 UTC
8d26460 Callum Waters 06 October 2022, 08:44:12 UTC rename blockchain to blocksync in certain areas (#9512) 06 October 2022, 08:44:12 UTC
c0bdb24 Jasmina Malicevic 06 October 2022, 07:02:08 UTC security/p2p: prevent peers who errored being added to the peer_set (#9500) * Mark failed removal of peer to address security bug Co-authored-by: Callum Waters <cmwaters19@gmail.com> 06 October 2022, 07:02:08 UTC
cdd3479 Sergio Mena 05 October 2022, 19:16:45 UTC Extend the load report tool to include transactions' hashes (#9509) * Add transaction hash to raw data * Add hash in formatted output * Cosmetic 05 October 2022, 19:16:45 UTC
b1dc5a6 Giuliano 05 October 2022, 09:38:21 UTC fix wrong axioms (#9511) Co-authored-by: Josef Widder <44643235+josef-widder@users.noreply.github.com> 05 October 2022, 09:38:21 UTC
abbeb91 samricotta 04 October 2022, 15:57:09 UTC Use evidence period when pruning (#9505) * Added logic so when pruning, the evidence period is taken into consideration and only deletes unecessary data 04 October 2022, 15:57:09 UTC
a02cc30 Callum Waters 04 October 2022, 13:01:32 UTC config: use a different source of versioning (#9486) 04 October 2022, 13:01:32 UTC
5c23ffb mmsqe 04 October 2022, 09:03:03 UTC Remove the PEG query implementation. (#7336) (#9478) 04 October 2022, 09:03:03 UTC
45518db dependabot[bot] 03 October 2022, 09:03:48 UTC build(deps): Bump styfle/cancel-workflow-action from 0.10.0 to 0.10.1 (#9501) Bumps [styfle/cancel-workflow-action](https://github.com/styfle/cancel-workflow-action) from 0.10.0 to 0.10.1. - [Release notes](https://github.com/styfle/cancel-workflow-action/releases) - [Commits](https://github.com/styfle/cancel-workflow-action/compare/0.10.0...0.10.1) --- updated-dependencies: - dependency-name: styfle/cancel-workflow-action dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> 03 October 2022, 09:03:48 UTC
f76f653 Thane Thomson 28 September 2022, 14:07:06 UTC ci: Only notify on nightly E2E failures (#9495) Signed-off-by: Thane Thomson <connect@thanethomson.com> Signed-off-by: Thane Thomson <connect@thanethomson.com> 28 September 2022, 14:07:06 UTC
20ffe9e dependabot[bot] 27 September 2022, 15:51:22 UTC build(deps): Bump actions/stale from 5 to 6 (#9493) Bumps [actions/stale](https://github.com/actions/stale) from 5 to 6. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/actions/stale/releases">actions/stale's releases</a>.</em></p> <blockquote> <h2>v6.0.0</h2> <p>:warning: Breaking change :warning:</p> <p>Issues/PRs default <code>close-issue-reason</code> is now <code>not_planned</code>(<a href="https://github-redirect.dependabot.com/actions/stale/issues/789">#789</a>)</p> <h2>V5.2.0</h2> <p>Features: New option <code>include-only-assigned</code> enables users to process only issues/PRs that are already assigned. If there is no assignees and this option is set, issue will not be processed per: <a href="https://github-redirect.dependabot.com/actions/stale/issues/596">issue/596</a></p> <p>Fixes: Fix date comparison edge case <a href="https://github-redirect.dependabot.com/actions/stale/pull/816">PR/816</a></p> <p>Dependency Updates: <a href="https://github-redirect.dependabot.com/actions/stale/pull/812">PR/812</a></p> <h2>Fix issue when days-before-close is more than days-before-stale</h2> <p>fixes a bug introduced in <a href="https://github-redirect.dependabot.com/actions/stale/issues/717">#717</a></p> <p>fixed in <a href="https://github-redirect.dependabot.com/actions/stale/issues/775">#775</a></p> <h2>v5.1.0</h2> <h1>[5.1.0]</h1> <p><a href="https://github-redirect.dependabot.com/actions/stale/issues/696">Don't process stale issues right after they're marked stale</a> Add close-issue-reason option <a href="https://github-redirect.dependabot.com/actions/stale/pull/764">#764</a><a href="https://github-redirect.dependabot.com/actions/stale/pull/772">#772</a> Various dependabot/dependency updates</p> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/actions/stale/blob/main/CHANGELOG.md">actions/stale's changelog</a>.</em></p> <blockquote> <h1>Changelog</h1> <h1>[6.0.0]</h1> <p>:warning: Breaking change :warning:</p> <p>Issues/PRs default <code>close-issue-reason</code> is now <code>not_planned</code>(<a href="https://github-redirect.dependabot.com/actions/stale/issues/789">#789</a>)</p> <h1>[5.1.0]</h1> <p><a href="https://github-redirect.dependabot.com/actions/stale/issues/696">Don't process stale issues right after they're marked stale</a> [Add close-issue-reason option]<a href="https://github-redirect.dependabot.com/actions/stale/pull/764">#764</a><a href="https://github-redirect.dependabot.com/actions/stale/pull/772">#772</a> Various dependabot/dependency updates</p> <h2><a href="https://github.com/actions/stale/compare/v3.0.19...v4.1.0">4.1.0</a> (2021-07-14)</h2> <h2>Features</h2> <ul> <li><a href="https://github.com/actions/stale/commit/9912fa74d1c01b5d6187793d97441019cbe325d0">Ability to exempt draft PRs</a></li> </ul> <h2><a href="https://github.com/actions/stale/compare/v3.0.19...v4.0.0">4.0.0</a> (2021-07-14)</h2> <h3>Features</h3> <ul> <li><strong>options:</strong> simplify config by removing skip stale message options (<a href="https://github-redirect.dependabot.com/actions/stale/issues/457">#457</a>) (<a href="https://github.com/actions/stale/commit/6ec637d238067ab8cc96c9289dcdac280bbd3f4a">6ec637d</a>), closes <a href="https://github-redirect.dependabot.com/actions/stale/issues/405">#405</a> <a href="https://github-redirect.dependabot.com/actions/stale/issues/455">#455</a></li> <li><strong>output:</strong> print output parameters (<a href="https://github-redirect.dependabot.com/actions/stale/issues/458">#458</a>) (<a href="https://github.com/actions/stale/commit/3e6d35b685f0b2fa1a69be893fa07d3d85e05ee0">3e6d35b</a>)</li> </ul> <h3>Bug Fixes</h3> <ul> <li><strong>dry-run:</strong> forbid mutations in dry-run (<a href="https://github-redirect.dependabot.com/actions/stale/issues/500">#500</a>) (<a href="https://github.com/actions/stale/commit/f1017f33dd159ea51366375120c3e6981d7c3097">f1017f3</a>), closes <a href="https://github-redirect.dependabot.com/actions/stale/issues/499">#499</a></li> <li><strong>logs:</strong> coloured logs (<a href="https://github-redirect.dependabot.com/actions/stale/issues/465">#465</a>) (<a href="https://github.com/actions/stale/commit/5fbbfba142860ea6512549e96e36e3540c314132">5fbbfba</a>)</li> <li><strong>operations:</strong> fail fast the current batch to respect the operations limit (<a href="https://github-redirect.dependabot.com/actions/stale/issues/474">#474</a>) (<a href="https://github.com/actions/stale/commit/5f6f311ca6aa75babadfc7bac6edf5d85fa3f35d">5f6f311</a>), closes <a href="https://github-redirect.dependabot.com/actions/stale/issues/466">#466</a></li> <li><strong>label comparison</strong>: make label comparison case insensitive <a href="https://github-redirect.dependabot.com/actions/stale/pull/517">#517</a>, closes <a href="https://github-redirect.dependabot.com/actions/stale/pull/516">#516</a></li> <li><strong>filtering comments by actor could have strange behavior</strong>: &quot;stale&quot; comments are now detected based on if the message is the stale message not <em>who</em> made the comment(<a href="https://github-redirect.dependabot.com/actions/stale/pull/519">#519</a>), fixes <a href="https://github-redirect.dependabot.com/actions/stale/pull/441">#441</a>, <a href="https://github-redirect.dependabot.com/actions/stale/pull/509">#509</a>, <a href="https://github-redirect.dependabot.com/actions/stale/pull/518">#518</a></li> </ul> <h3>Breaking Changes</h3> <ul> <li>The options <code>skip-stale-issue-message</code> and <code>skip-stale-pr-message</code> were removed. Instead, setting the options <code>stale-issue-message</code> and <code>stale-pr-message</code> will be enough to let the stale workflow add a comment. If the options are unset, a comment will not be added which was the equivalent of setting <code>skip-stale-issue-message</code> to <code>true</code>.</li> <li>The <code>operations-per-run</code> option will be more effective. After migrating, you could face a failed-fast process workflow if you let the default value (30) or set it to a small number. In that case, you will see a warning at the end of the logs (if enabled) indicating that the workflow was stopped sooner to avoid consuming too much API calls. In most cases, you can just increase this limit to make sure to process everything in a single run.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/actions/stale/commit/3de2653986ebd134983c79fe2be5d45cc3d9f4e1"><code>3de2653</code></a> Update changelog for v6.0.0 (<a href="https://github-redirect.dependabot.com/actions/stale/issues/829">#829</a>)</li> <li><a href="https://github.com/actions/stale/commit/02e44c81cc3144e8817a5686f3d7c24658f6f1e6"><code>02e44c8</code></a> fix(options)!: Make <code>not_planned</code> the default <code>close-issue-reason</code> (<a href="https://github-redirect.dependabot.com/actions/stale/issues/807">#807</a>)</li> <li>See full diff in <a href="https://github.com/actions/stale/compare/v5...v6">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=actions/stale&package-manager=github_actions&previous-version=5&new-version=6)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 27 September 2022, 15:51:22 UTC
af5281d Callum Waters 26 September 2022, 15:58:52 UTC statesync: convert snapshot hashes to hex strings for logging (#9471) 26 September 2022, 15:58:52 UTC
ed68aad Emmanuel T Odeke 23 September 2022, 20:26:55 UTC .github/workflows: add cosmos/gosec vulnerability scanner for each Push/PR (#9464) Adds a code vulnerability scanner that'll flag issues and issue advisories from cosmos/gosec https://github.com/cosmos/gosec 23 September 2022, 20:26:55 UTC
back to top