Revision 0361bdfddca20c8855ea3bdbbbc9c999912b10ff authored by Wanpeng Li on 18 April 2022, 07:42:32 UTC, committed by Paolo Bonzini on 21 April 2022, 17:16:14 UTC
MSR_KVM_POLL_CONTROL is cleared on reset, thus reverting guests to host-side polling after suspend/resume. Non-bootstrap CPUs are restored correctly by the haltpoll driver because they are hot-unplugged during suspend and hot-plugged during resume; however, the BSP is not hotpluggable and remains in host-sde polling mode after the guest resume. The makes the guest pay for the cost of vmexits every time the guest enters idle. Fix it by recording BSP's haltpoll state and resuming it during guest resume. Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1650267752-46796-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
1 parent a413a62
File | Mode | Size |
---|---|---|
atomic | ||
basic | ||
clang-tools | ||
coccinelle | ||
dtc | ||
dummy-tools | ||
gcc-plugins | ||
gdb | ||
genksyms | ||
kconfig | ||
ksymoops | ||
mod | ||
package | ||
selinux | ||
tracing | ||
.gitignore | -rw-r--r-- | 146 bytes |
Kbuild.include | -rw-r--r-- | 7.3 KB |
Kconfig.include | -rw-r--r-- | 2.6 KB |
Lindent | -rwxr-xr-x | 502 bytes |
Makefile | -rw-r--r-- | 1.4 KB |
Makefile.asm-generic | -rw-r--r-- | 1.8 KB |
Makefile.build | -rw-r--r-- | 19.4 KB |
Makefile.clang | -rw-r--r-- | 1.7 KB |
Makefile.clean | -rw-r--r-- | 2.2 KB |
Makefile.compiler | -rw-r--r-- | 2.7 KB |
Makefile.debug | -rw-r--r-- | 706 bytes |
Makefile.dtbinst | -rw-r--r-- | 999 bytes |
Makefile.extrawarn | -rw-r--r-- | 2.9 KB |
Makefile.gcc-plugins | -rw-r--r-- | 2.7 KB |
Makefile.headersinst | -rw-r--r-- | 2.9 KB |
Makefile.host | -rw-r--r-- | 4.6 KB |
Makefile.kasan | -rw-r--r-- | 1.7 KB |
Makefile.kcov | -rw-r--r-- | 333 bytes |
Makefile.kcsan | -rw-r--r-- | 1004 bytes |
Makefile.lib | -rw-r--r-- | 18.7 KB |
Makefile.modfinal | -rw-r--r-- | 2.7 KB |
Makefile.modinst | -rw-r--r-- | 2.4 KB |
Makefile.modpost | -rw-r--r-- | 4.4 KB |
Makefile.package | -rw-r--r-- | 6.9 KB |
Makefile.ubsan | -rw-r--r-- | 770 bytes |
Makefile.userprogs | -rw-r--r-- | 1.6 KB |
adjust_autoksyms.sh | -rwxr-xr-x | 2.1 KB |
as-version.sh | -rwxr-xr-x | 2.0 KB |
asn1_compiler.c | -rw-r--r-- | 35.3 KB |
bin2c.c | -rw-r--r-- | 743 bytes |
bloat-o-meter | -rwxr-xr-x | 3.4 KB |
bootgraph.pl | -rwxr-xr-x | 5.6 KB |
bpf_doc.py | -rwxr-xr-x | 29.2 KB |
cc-can-link.sh | -rwxr-xr-x | 166 bytes |
cc-version.sh | -rwxr-xr-x | 1.5 KB |
check-sysctl-docs | -rwxr-xr-x | 4.4 KB |
check_extable.sh | -rwxr-xr-x | 4.9 KB |
checkdeclares.pl | -rwxr-xr-x | 1.1 KB |
checkincludes.pl | -rwxr-xr-x | 1.9 KB |
checkkconfigsymbols.py | -rwxr-xr-x | 15.4 KB |
checkpatch.pl | -rwxr-xr-x | 225.5 KB |
checkstack.pl | -rwxr-xr-x | 5.9 KB |
checksyscalls.sh | -rwxr-xr-x | 7.4 KB |
checkversion.pl | -rwxr-xr-x | 2.2 KB |
cleanfile | -rwxr-xr-x | 3.5 KB |
cleanpatch | -rwxr-xr-x | 5.1 KB |
coccicheck | -rwxr-xr-x | 7.9 KB |
config | -rwxr-xr-x | 4.7 KB |
const_structs.checkpatch | -rw-r--r-- | 1.4 KB |
decode_stacktrace.sh | -rwxr-xr-x | 6.6 KB |
decodecode | -rwxr-xr-x | 2.9 KB |
depmod.sh | -rwxr-xr-x | 1.4 KB |
dev-needs.sh | -rwxr-xr-x | 6.1 KB |
diffconfig | -rwxr-xr-x | 3.7 KB |
documentation-file-ref-check | -rwxr-xr-x | 5.7 KB |
export_report.pl | -rwxr-xr-x | 4.5 KB |
extract-ikconfig | -rwxr-xr-x | 1.7 KB |
extract-module-sig.pl | -rwxr-xr-x | 3.7 KB |
extract-sys-certs.pl | -rwxr-xr-x | 3.7 KB |
extract-vmlinux | -rwxr-xr-x | 1.7 KB |
extract_xc3028.pl | -rwxr-xr-x | 44.6 KB |
faddr2line | -rwxr-xr-x | 6.2 KB |
file-size.sh | -rwxr-xr-x | 86 bytes |
find-unused-docs.sh | -rwxr-xr-x | 1.3 KB |
gcc-goto.sh | -rwxr-xr-x | 511 bytes |
gcc-ld | -rwxr-xr-x | 711 bytes |
gcc-x86_32-has-stack-protector.sh | -rwxr-xr-x | 408 bytes |
gcc-x86_64-has-stack-protector.sh | -rwxr-xr-x | 198 bytes |
gen_autoksyms.sh | -rwxr-xr-x | 1.4 KB |
gen_ksymdeps.sh | -rwxr-xr-x | 556 bytes |
generate_initcall_order.pl | -rwxr-xr-x | 5.9 KB |
get_abi.pl | -rwxr-xr-x | 25.3 KB |
get_dvb_firmware | -rwxr-xr-x | 24.5 KB |
get_feat.pl | -rwxr-xr-x | 14.6 KB |
get_maintainer.pl | -rwxr-xr-x | 67.1 KB |
gfp-translate | -rwxr-xr-x | 1.7 KB |
headerdep.pl | -rwxr-xr-x | 3.5 KB |
headers_install.sh | -rwxr-xr-x | 3.4 KB |
insert-sys-cert.c | -rw-r--r-- | 8.9 KB |
jobserver-exec | -rwxr-xr-x | 2.2 KB |
kallsyms.c | -rw-r--r-- | 18.1 KB |
kernel-doc | -rwxr-xr-x | 65.9 KB |
ld-version.sh | -rwxr-xr-x | 1.7 KB |
leaking_addresses.pl | -rwxr-xr-x | 12.8 KB |
link-vmlinux.sh | -rwxr-xr-x | 10.9 KB |
makelst | -rwxr-xr-x | 808 bytes |
markup_oops.pl | -rwxr-xr-x | 7.9 KB |
min-tool-version.sh | -rwxr-xr-x | 558 bytes |
mkcompile_h | -rwxr-xr-x | 2.6 KB |
mksysmap | -rwxr-xr-x | 1.3 KB |
mkuboot.sh | -rwxr-xr-x | 414 bytes |
module.lds.S | -rw-r--r-- | 1.5 KB |
modules-check.sh | -rwxr-xr-x | 427 bytes |
nsdeps | -rw-r--r-- | 1.7 KB |
objdiff | -rwxr-xr-x | 2.8 KB |
pahole-flags.sh | -rwxr-xr-x | 585 bytes |
pahole-version.sh | -rwxr-xr-x | 269 bytes |
parse-maintainers.pl | -rwxr-xr-x | 4.5 KB |
patch-kernel | -rwxr-xr-x | 9.9 KB |
profile2linkerlist.pl | -rwxr-xr-x | 414 bytes |
prune-kernel | -rwxr-xr-x | 708 bytes |
recordmcount.c | -rw-r--r-- | 16.7 KB |
recordmcount.h | -rw-r--r-- | 19.4 KB |
recordmcount.pl | -rwxr-xr-x | 17.5 KB |
remove-stale-files | -rwxr-xr-x | 1.6 KB |
setlocalversion | -rwxr-xr-x | 3.6 KB |
show_delta | -rwxr-xr-x | 3.0 KB |
sign-file.c | -rw-r--r-- | 9.8 KB |
sorttable.c | -rw-r--r-- | 7.6 KB |
sorttable.h | -rw-r--r-- | 12.9 KB |
spdxcheck-test.sh | -rw-r--r-- | 277 bytes |
spdxcheck.py | -rwxr-xr-x | 10.1 KB |
spelling.txt | -rw-r--r-- | 32.5 KB |
sphinx-pre-install | -rwxr-xr-x | 24.4 KB |
split-man.pl | -rwxr-xr-x | 604 bytes |
stackdelta | -rwxr-xr-x | 1.8 KB |
stackusage | -rwxr-xr-x | 794 bytes |
subarch.include | -rw-r--r-- | 619 bytes |
syscallhdr.sh | -rwxr-xr-x | 1.9 KB |
syscallnr.sh | -rwxr-xr-x | 1.5 KB |
syscalltbl.sh | -rwxr-xr-x | 1.5 KB |
tags.sh | -rwxr-xr-x | 10.4 KB |
test_fortify.sh | -rw-r--r-- | 2.2 KB |
tools-support-relr.sh | -rwxr-xr-x | 546 bytes |
unifdef.c | -rw-r--r-- | 34.8 KB |
ver_linux | -rwxr-xr-x | 2.6 KB |
xen-hypercalls.sh | -rwxr-xr-x | 386 bytes |
xz_wrap.sh | -rwxr-xr-x | 563 bytes |
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...