Revision 2284bbd0cf3981462dc6d729c89851c66b05a66a authored by Leon Schuermann on 11 January 2021, 19:03:15 UTC, committed by Jakub Kicinski on 13 January 2021, 04:00:51 UTC
This commit enables the use of the r8153_ecm driver, introduced with
commit c1aedf015ebdd0 ("net/usb/r8153_ecm: support ECM mode for
RTL8153") for the Lenovo Powered USB-C Hub (17ef:721e) based on the
Realtek RTL8153B chip.
This results in the following driver preference:
- if r8152 is available, use the r8152 driver
- if r8152 is not available, use the r8153_ecm driver
This is done to prevent the NIC from constantly sending pause frames
when the host system enters standby (fixed by using the r8152 driver
in "r8152: Add Lenovo Powered USB-C Travel Hub"), while still allowing
the device to work with the r8153_ecm driver as a fallback.
Signed-off-by: Leon Schuermann <leon@is.currently.online>
Tested-by: Leon Schuermann <leon@is.currently.online>
Link: https://lore.kernel.org/r/20210111190312.12589-3-leon@is.currently.online
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1 parent cb82a54
| File | Mode | Size |
|---|---|---|
| Makefile | -rw-r--r-- | 214 bytes |
| berlin2-avpll.c | -rw-r--r-- | 10.5 KB |
| berlin2-avpll.h | -rw-r--r-- | 686 bytes |
| berlin2-div.c | -rw-r--r-- | 6.8 KB |
| berlin2-div.h | -rw-r--r-- | 1.8 KB |
| berlin2-pll.c | -rw-r--r-- | 2.4 KB |
| berlin2-pll.h | -rw-r--r-- | 565 bytes |
| bg2.c | -rw-r--r-- | 18.6 KB |
| bg2q.c | -rw-r--r-- | 10.2 KB |
| common.h | -rw-r--r-- | 416 bytes |
Computing file changes ...
