The web-platform-tests Project [![IRC chat](https://goo.gl/6nCIks)](http://irc.w3.org/?channels=testing)
==============================

The web-platform-tests Project is a W3C-coordinated attempt to build a
cross-browser testsuite for the Web-platform stack. Writing tests in a way
that allows them to be run in all browsers gives browser projects
confidence that they are shipping software that is compatible with other
implementations, and that later implementations will be compatible with
their implementations. This in turn gives Web authors/developers
confidence that they can actually rely on the Web platform to deliver on
the promise of working across browsers and devices without needing extra
layers of abstraction to paper over the gaps left by specification
editors and implementors.

Setting Up the Repo
===================

Clone or otherwise get https://github.com/web-platform-tests/wpt.

Note: because of the frequent creation and deletion of branches in this
repo, it is recommended to "prune" stale branches when fetching updates,
i.e. use `git pull --prune` (or `git fetch -p && git merge`).

Running the Tests
=================

The tests are designed to be run from your local computer. The test
environment requires [Python 2.7+](http://www.python.org/downloads) (but not Python 3.x).

On Windows, be sure to add the Python directory (`c:\python2x`, by default) to
your `%Path%` [Environment Variable](http://www.computerhope.com/issues/ch000549.htm),
and read the [Windows Notes](#windows-notes) section below.

To get the tests running, you need to set up the test domains in your
[`hosts` file](http://en.wikipedia.org/wiki/Hosts_%28file%29%23Location_in_the_file_system).

The necessary content can be generated with `./wpt make-hosts-file`; on
Windows, you will need to precede the prior command with `python` or
the path to the Python binary (`python wpt make-hosts-file`).

For example, on most UNIX-like systems, you can setup the hosts file with:

```bash
./wpt make-hosts-file | sudo tee -a /etc/hosts
```

And on Windows (this must be run in a PowerShell session with Administrator privileges):

```bash
python wpt make-hosts-file | Out-File $env:systemroot\System32\drivers\etc\hosts -Encoding ascii -Append
```

If you are behind a proxy, you also need to make sure the domains above are
excluded from your proxy lookups.


Running Tests Manually
======================

The test server can be started using
```
./wpt serve
```

**On Windows**: You will need to precede the prior command with
`python` or the path to the python binary.
```bash
python wpt serve
```

This will start HTTP servers on two ports and a websockets server on
one port. By default the web servers start on ports 8000 and 8443 and
the other ports are randomly-chosen free ports. Tests must be loaded
from the *first* HTTP server in the output. To change the ports,
create a `config.json` file in the wpt root directory, and add
port definitions of your choice e.g.:

```
{
  "ports": {
    "http": [1234, "auto"],
    "https":[5678]
  }
}
```

After your `hosts` file is configured, the servers will be locally accessible at:

http://web-platform.test:8000/<br>
https://web-platform.test:8443/ *

\**See [Trusting Root CA](#trusting-root-ca)*

Running Tests Automatically
---------------------------

Tests can be run automatically in a browser using the `run` command of
the `wpt` script in the root of the checkout. This requires the hosts
file setup documented above, but you must *not* have the
test server already running when calling `wpt run`. The basic command
line syntax is:

```bash
./wpt run product [tests]
```

**On Windows**: You will need to precede the prior command with
`python` or the path to the python binary.
```bash
python wpt run product [tests]
```

where `product` is currently `firefox` or `chrome` and `[tests]` is a
list of paths to tests. This will attempt to automatically locate a
browser instance and install required dependencies. The command is
very configurable; for example to specify a particular binary use
`wpt run --binary=path product`. The full range of options can be see
with `wpt run --help` and `wpt run --wptrunner-help`.

Not all dependencies can be automatically installed; in particular the
`certutil` tool required to run https tests with Firefox must be
installed using a system package manager or similar.

On Debian/Ubuntu certutil may be installed using:

```
sudo apt install libnss3-tools
```

And on macOS with homebrew using:

```
brew install nss
```

On other platforms, download the firefox archive and common.tests.tar.gz
archive for your platform from
[Mozilla CI](https://archive.mozilla.org/pub/firefox/nightly/latest-mozilla-central/).

Then extract `certutil[.exe]` from the tests.tar.gz package and
`libnss3[.so|.dll|.dynlib]` and put the former on your path and the latter on
your library path.


Command Line Tools
==================

The `wpt` command provides a frontend to a variety of tools for
working with and running web-platform-tests. Some of the most useful
commands are:

* `wpt serve` - For starting the wpt http server
* `wpt run` - For running tests in a browser
* `wpt lint` - For running the lint against all tests
* `wpt manifest` - For updating or generating a `MANIFEST.json` test manifest
* `wpt install` - For installing the latest release of a browser or
  webdriver server on the local machine.

<span id="submodules">Submodules</span>
=======================================

Some optional components of web-platform-tests (test components from
third party software and pieces of the CSS build system) are included
as submodules. To obtain these components run the following in the
root of your checkout:

```
git submodule update --init --recursive
```

Prior to commit `39d07eb01fab607ab1ffd092051cded1bdd64d78` submodules
were required for basic functionality. If you are working with an
older checkout, the above command is required in all cases.

When moving between a commit prior to `39d07eb` and one after it git
may complain

```
$ git checkout master
error: The following untracked working tree files would be overwritten by checkout:
[…]
```

...followed by a long list of files. To avoid this error, remove
the `resources` and `tools` directories before switching branches:

```
$ rm -r resources/ tools/
$ git checkout master
Switched to branch 'master'
Your branch is up-to-date with 'origin/master'
```

When moving in the opposite direction, i.e. to a commit that does have
submodules, you will need to `git submodule update`, as above. If git
throws an error like:

```
fatal: No url found for submodule path 'resources/webidl2/test/widlproc' in .gitmodules
Failed to recurse into submodule path 'resources/webidl2'
fatal: No url found for submodule path 'tools/html5lib' in .gitmodules
Failed to recurse into submodule path 'resources'
Failed to recurse into submodule path 'tools'
```

...then remove the `tools` and `resources` directories, as above.

<span id="windows-notes">Windows Notes</span>
=============================================

On Windows `wpt` commands must be prefixed with `python` or the path
to the python binary (if `python` is not in your `%PATH%`).

```bash
python wpt [command]
```

Alternatively, you may also use
[Bash on Ubuntu on Windows](https://msdn.microsoft.com/en-us/commandline/wsl/about)
in the Windows 10 Anniversary Update build, then access your windows
partition from there to launch `wpt` commands.

Please make sure git and your text editor do not automatically convert
line endings, as it will cause lint errors. For git, please set
`git config core.autocrlf false` in your working tree.

Certificates
============

By default pre-generated certificates for the web-platform.test domain
are provided in [`tools/certs`](tools/certs). If you wish to generate new
certificates for any reason it's possible to use OpenSSL when starting
the server, or starting a test run, by providing the
`--ssl-type=openssl` argument to the `wpt serve` or `wpt run`
commands.

If you installed OpenSSL in such a way that running `openssl` at a
command line doesn't work, you also need to adjust the path to the
OpenSSL binary. This can be done by adding a section to `config.json`
like:

```
"ssl": {"openssl": {"binary": "/path/to/openssl"}}
```

On Windows using OpenSSL typically requires installing an OpenSSL distribution.
[Shining Light](https://slproweb.com/products/Win32OpenSSL.html)
provide a convenient installer that is known to work, but requires a
little extra setup, i.e.:

Run the installer for Win32_OpenSSL_v1.1.0b (30MB). During installation,
change the default location for where to Copy OpenSSL Dlls from the
System directory to the /bin directory.

After installation, ensure that the path to OpenSSL (typically,
this will be `C:\OpenSSL-Win32\bin`) is in your `%Path%`
[Environment Variable](http://www.computerhope.com/issues/ch000549.htm).
If you forget to do this part, you will most likely see a 'File Not Found'
error when you start wptserve.

Finally, set the path value in the server configuration file to the
default OpenSSL configuration file location. To do this create a file
called `config.json`.  Then add the OpenSSL configuration below,
ensuring that the key `ssl/openssl/base_conf_path` has a value that is
the path to the OpenSSL config file (typically this will be
`C:\\OpenSSL-Win32\\bin\\openssl.cfg`):

```
{
  "ssl": {
    "type": "openssl",
    "encrypt_after_connect": false,
    "openssl": {
      "openssl_binary": "openssl",
      "base_path: "_certs",
      "force_regenerate": false,
      "base_conf_path": "C:\\OpenSSL-Win32\\bin\\openssl.cfg"
    },
  },
}
```

### Trusting Root CA

To prevent browser SSL warnings when running HTTPS tests locally, the
web-platform-tests Root CA file `cacert.pem` in [tools/certs](tools/certs)
must be added as a trusted certificate in your OS/browser.

**NOTE**: The CA should not be installed in any browser profile used
outside of tests, since it may be used to generate fake
certificates. For browsers that use the OS certificate store, tests
should therefore not be run manually outside a dedicated OS instance
(e.g. a VM). To avoid this problem when running tests in Chrome or
Firefox use `wpt run`, which disables certificate checks and therefore
doesn't require the root CA to be trusted.

Publication
===========

The master branch is automatically synced to http://w3c-test.org/.

Pull requests are
[automatically mirrored](http://w3c-test.org/submissions/) except those
that modify sensitive resources (such as `.py`). The latter require
someone with merge access to comment with "LGTM" or "w3c-test:mirror" to
indicate the pull request has been checked.

Finding Things
==============

Each top-level directory matches the shortname used by a standard, with
some exceptions. (Typically the shortname is from the standard's
corresponding GitHub repository.)

For some of the specifications, the tree under the top-level directory
represents the sections of the respective documents, using the section
IDs for directory names, with a maximum of three levels deep.

So if you're looking for tests in HTML for "The History interface",
they will be under `html/browsers/history/the-history-interface/`.

Various resources that tests depend on are in `common`, `images`, and
`fonts`.

Branches
========

In the vast majority of cases the **only** upstream branch that you
should need to care about is `master`. If you see other branches in
the repository, you can generally safely ignore them.

Contributing
============

Save the Web, Write Some Tests!

Absolutely everyone is welcome (and even encouraged) to contribute to
test development, so long as you fulfill the contribution requirements
detailed in the [Contributing Guidelines][contributing]. No test is
too small or too simple, especially if it corresponds to something for
which you've noted an interoperability bug in a browser.

The way to contribute is just as usual:

* Fork this repository (and make sure you're still relatively in sync
  with it if you forked a while ago).
* Create a branch for your changes:
  `git checkout -b topic`.
* Make your changes.
* Run the lint script described below.
* Commit locally and push that to your repo.
* Send in a pull request based on the above.

Issues with web-platform-tests
------------------------------

If you spot an issue with a test and are not comfortable providing a
pull request per above to fix it, please
[file a new issue](https://github.com/web-platform-tests/wpt/issues/new).
Thank you!

Lint tool
---------

We have a lint tool for catching common mistakes in test files. You
can run it manually by starting the `lint` executable from the root of
your local web-platform-tests working directory like this:

```
./wpt lint
```

The lint tool is also run automatically for every submitted pull
request, and reviewers will not merge branches with tests that have
lint errors, so you must fix any errors the lint tool reports.

In the unusual case of error reports for things essential to a
certain test or that for other exceptional reasons shouldn't prevent
a merge of a test, update and commit the `lint.whitelist` file in the
web-platform-tests root directory to suppress the error reports.

For more details, see the [lint-tool documentation][lint-tool].

[lint-tool]: https://web-platform-tests.org/writing-tests/lint-tool.html

Adding command-line scripts ("tools" subdirs)
---------------------------------------------

Sometimes you may want to add a script to the repository that's meant
to be used from the command line, not from a browser (e.g., a script
for generating test files). If you want to ensure (e.g., for security
reasons) that such scripts won't be handled by the HTTP server, but
will instead only be usable from the command line, then place them in
either:

* the `tools` subdir at the root of the repository, or

* the `tools` subdir at the root of any top-level directory in the
  repository which contains the tests the script is meant to be used
  with

Any files in those `tools` directories won't be handled by the HTTP
server; instead the server will return a 404 if a user navigates to
the URL for a file within them.

If you want to add a script for use with a particular set of tests but
there isn't yet any `tools` subdir at the root of a top-level
directory in the repository containing those tests, you can create a
`tools` subdir at the root of that top-level directory and place your
scripts there.

For example, if you wanted to add a script for use with tests in the
`notifications` directory, create the `notifications/tools` subdir and
put your script there.

Test Review
===========

We can sometimes take a little while to go through pull requests
because we have to go through all the tests and ensure that they match
the specification correctly. But we look at all of them, and take
everything that we can.

META.yml files are used only to indicate who should be notified of pull
requests.  If you are interested in receiving notifications of proposed
changes to tests in a given directory, feel free to add yourself to the
META.yml file. Anyone with expertise in the specification under test can
approve a pull request.  In particular, if a test change has already
been adequately reviewed "upstream" in another repository, it can be
pushed here without any further review by supplying a link to the
upstream review.

Search filters to find things to review:

* [Open PRs (excluding vendor exports)](https://github.com/web-platform-tests/wpt/pulls?utf8=%E2%9C%93&q=is%3Apr+is%3Aopen+-label%3A%22mozilla%3Agecko-sync%22+-label%3A%22chromium-export%22+-label%3A%22webkit-export%22+-label%3A%22servo-export%22+-label%3Avendor-imports)
* [Reviewed but still open PRs (excluding vendor exports)](https://github.com/web-platform-tests/wpt/pulls?utf8=%E2%9C%93&q=is%3Apr+is%3Aopen+-label%3Amozilla%3Agecko-sync+-label%3Achromium-export+-label%3Awebkit-export+-label%3Aservo-export+-label%3Avendor-imports+review%3Aapproved+-label%3A%22do+not+merge+yet%22+-label%3A%22status%3Aneeds-spec-decision%22) (Merge? Something left to fix? Ping other reviewer?)
* [Open PRs without reviewers](https://github.com/web-platform-tests/wpt/pulls?q=is%3Apr+is%3Aopen+label%3Astatus%3Aneeds-reviewers)
* [Open PRs with label `infra` (excluding vendor exports)](https://github.com/web-platform-tests/wpt/pulls?utf8=%E2%9C%93&q=is%3Apr+is%3Aopen+label%3Ainfra+-label%3A%22mozilla%3Agecko-sync%22+-label%3A%22chromium-export%22+-label%3A%22webkit-export%22+-label%3A%22servo-export%22+-label%3Avendor-imports)
* [Open PRs with label `docs` (excluding vendor exports)](https://github.com/web-platform-tests/wpt/pulls?utf8=%E2%9C%93&q=is%3Apr+is%3Aopen+label%3Adocs+-label%3A%22mozilla%3Agecko-sync%22+-label%3A%22chromium-export%22+-label%3A%22webkit-export%22+-label%3A%22servo-export%22+-label%3Avendor-imports)

Getting Involved
================

If you wish to contribute actively, you're very welcome to join the
public-test-infra@w3.org mailing list (low traffic) by
[signing up to our mailing list](mailto:public-test-infra-request@w3.org?subject=subscribe).
The mailing list is [archived][mailarchive].

Join us on irc #testing ([irc.w3.org][ircw3org], port 6665). The channel
is [archived][ircarchive].

[contributing]: https://github.com/web-platform-tests/wpt/blob/master/CONTRIBUTING.md
[ircw3org]: https://www.w3.org/wiki/IRC
[ircarchive]: https://w3.logbot.info/testing
[mailarchive]: https://lists.w3.org/Archives/Public/public-test-infra/

Documentation
=============

* [How to write and review tests](https://web-platform-tests.org/)
* [Documentation for the wptserve server](http://wptserve.readthedocs.org/en/latest/)