/*
 *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 *
 *<LicenseText>
 *
 * CitcomS by Louis Moresi, Shijie Zhong, Lijie Han, Eh Tan,
 * Clint Conrad, Michael Gurnis, and Eun-seo Choi.
 * Copyright (C) 1994-2005, California Institute of Technology.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 *</LicenseText>
 *
 *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 */
#include "element_definitions.h"
#include "global_defs.h"
#include <math.h>

#include "lith_age.h"
#ifdef USE_GGRD
#include "ggrd_handling.h"
#endif
/* ========================================== */

void horizontal_bc(struct All_variables *,float *[],int,int,float,unsigned int,char,int,int);
void assign_internal_bc(struct All_variables *,int );
static void velocity_apply_periodic_bcs();
static void temperature_apply_periodic_bcs();
void read_temperature_boundary_from_file(struct All_variables *);
void read_velocity_boundary_from_file(struct All_variables *);

/* ========================================== */

void full_velocity_boundary_conditions(E)
     struct All_variables *E;
{
  void velocity_imp_vert_bc();
  void velocity_apply_periodicapply_periodic_bcs();

  void apply_side_sbc();

  int j,noz,lv,k,node;

  for(lv=E->mesh.gridmax;lv>=E->mesh.gridmin;lv--)
    for (j=1;j<=E->sphere.caps_per_proc;j++)     {
      noz = E->lmesh.NOZ[lv];
      if(E->mesh.topvbc != 1) {	/* free slip top */
	horizontal_bc(E,E->sphere.cap[j].VB,noz,1,0.0,VBX,0,lv,j);
	horizontal_bc(E,E->sphere.cap[j].VB,noz,3,0.0,VBZ,1,lv,j);
	horizontal_bc(E,E->sphere.cap[j].VB,noz,2,0.0,VBY,0,lv,j);
	horizontal_bc(E,E->sphere.cap[j].VB,noz,1,E->control.VBXtopval,SBX,1,lv,j);
	horizontal_bc(E,E->sphere.cap[j].VB,noz,3,0.0,SBZ,0,lv,j);
	horizontal_bc(E,E->sphere.cap[j].VB,noz,2,E->control.VBYtopval,SBY,1,lv,j);
      }
      if(E->mesh.botvbc != 1) {	/* free slip bottom */
        horizontal_bc(E,E->sphere.cap[j].VB,1,1,0.0,VBX,0,lv,j);
        horizontal_bc(E,E->sphere.cap[j].VB,1,3,0.0,VBZ,1,lv,j);
        horizontal_bc(E,E->sphere.cap[j].VB,1,2,0.0,VBY,0,lv,j);
        horizontal_bc(E,E->sphere.cap[j].VB,1,1,E->control.VBXbotval,SBX,1,lv,j);
        horizontal_bc(E,E->sphere.cap[j].VB,1,3,0.0,SBZ,0,lv,j);
        horizontal_bc(E,E->sphere.cap[j].VB,1,2,E->control.VBYbotval,SBY,1,lv,j);
        }

      if(E->mesh.topvbc == 1) {	/* velocity/no slip BC */
        horizontal_bc(E,E->sphere.cap[j].VB,noz,1,E->control.VBXtopval,VBX,1,lv,j);
        horizontal_bc(E,E->sphere.cap[j].VB,noz,3,0.0,VBZ,1,lv,j);
        horizontal_bc(E,E->sphere.cap[j].VB,noz,2,E->control.VBYtopval,VBY,1,lv,j);
        horizontal_bc(E,E->sphere.cap[j].VB,noz,1,0.0,SBX,0,lv,j);
        horizontal_bc(E,E->sphere.cap[j].VB,noz,3,0.0,SBZ,0,lv,j);
        horizontal_bc(E,E->sphere.cap[j].VB,noz,2,0.0,SBY,0,lv,j);

        if(E->control.vbcs_file){ /* this should either only be called
				     once, or the input routines need
				     to be told what to do for each
				     multigrid level and cap. it might
				     be easiest to call only once and
				     have routines deal with multigrid
				  */
	  if((lv == E->mesh.gridmin) && (j == E->sphere.caps_per_proc))
	     read_velocity_boundary_from_file(E);
	}
      }

      if(E->mesh.botvbc == 1) {	/* velocity bottom BC */
        horizontal_bc(E,E->sphere.cap[j].VB,1,1,E->control.VBXbotval,VBX,1,lv,j);
        horizontal_bc(E,E->sphere.cap[j].VB,1,3,0.0,VBZ,1,lv,j);
        horizontal_bc(E,E->sphere.cap[j].VB,1,2,E->control.VBYbotval,VBY,1,lv,j);
        horizontal_bc(E,E->sphere.cap[j].VB,1,1,0.0,SBX,0,lv,j);
        horizontal_bc(E,E->sphere.cap[j].VB,1,3,0.0,SBZ,0,lv,j);
        horizontal_bc(E,E->sphere.cap[j].VB,1,2,0.0,SBY,0,lv,j);
        }
      }    /* end for j and lv */

      if(E->control.side_sbcs)
	apply_side_sbc(E);

/* if(E->control.verbose) { */
/*  for (j=1;j<=E->sphere.caps_per_proc;j++) */
/*    for (node=1;node<=E->lmesh.nno;node++) */
/*       fprintf(E->fp_out,"m=%d VB== %d %g %g %g flag %u %u %u\n",j,node,E->sphere.cap[j].VB[1][node],E->sphere.cap[j].VB[2][node],E->sphere.cap[j].VB[3][node],E->node[j][node]&VBX,E->node[j][node]&VBY,E->node[j][node]&VBZ); */
/*  fflush(E->fp_out); */
/* } */

  /* If any imposed internal velocity structure it goes here */

      
      /*
	apply stress or velocity boundary conditions, read from file
	settings are to be implemented in those routines (will only do
	anything at present, if E->mesh.toplayerbc != 0
      */
      assign_internal_bc(E,1);
#ifdef USE_GGRD	
      if(E->control.ggrd.vtop_control) /* assign stress or velocity BCs */
	ggrd_read_vtop_from_file(E,1);
#endif
   return; }

/* ========================================== */

void full_temperature_boundary_conditions(E)
     struct All_variables *E;
{
  void temperatures_conform_bcs();
  void temperature_imposed_vert_bcs();
  int j,lev,noz;

  lev = E->mesh.levmax;
  for (j=1;j<=E->sphere.caps_per_proc;j++)    {
    noz = E->lmesh.noz;
    if(E->mesh.toptbc == 1)    {
      horizontal_bc(E,E->sphere.cap[j].TB,noz,3,E->control.TBCtopval,TBZ,1,lev,j);
      horizontal_bc(E,E->sphere.cap[j].TB,noz,3,E->control.TBCtopval,FBZ,0,lev,j);
      if(E->control.tbcs_file)
          read_temperature_boundary_from_file(E);
      }
    else   {
      horizontal_bc(E,E->sphere.cap[j].TB,noz,3,E->control.TBCtopval,TBZ,0,lev,j);
      horizontal_bc(E,E->sphere.cap[j].TB,noz,3,E->control.TBCtopval,FBZ,1,lev,j);
      }

    if(E->mesh.bottbc == 1)    {
      horizontal_bc(E,E->sphere.cap[j].TB,1,3,E->control.TBCbotval,TBZ,1,lev,j);
      horizontal_bc(E,E->sphere.cap[j].TB,1,3,E->control.TBCbotval,FBZ,0,lev,j);
      }
    else        {
      horizontal_bc(E,E->sphere.cap[j].TB,1,3,E->control.TBCbotval,TBZ,0,lev,j);
      horizontal_bc(E,E->sphere.cap[j].TB,1,3,E->control.TBCbotval,FBZ,1,lev,j);
      }

    if(E->control.lith_age_time==1)  {

   /* set the regions in which to use lithosphere files to determine temperature
   note that this is called if the lithosphere age in inputted every time step
   OR it is only maintained in the boundary regions */
      lith_age_temperature_bound_adj(E,lev);
    }


    }     /* end for j */

  temperatures_conform_bcs(E);
  E->temperatures_conform_bcs = temperatures_conform_bcs;

   return; }


/*  =========================================================  */


static void velocity_apply_periodic_bcs(E)
    struct All_variables *E;
{
  fprintf(E->fp,"Periodic boundary conditions\n");

  return;
  }

static void temperature_apply_periodic_bcs(E)
    struct All_variables *E;
{
 fprintf(E->fp,"Periodic temperature boundary conditions\n");

  return;
  }





/* version */
/* $Id$ */

/* End of file  */