https://github.com/geodynamics/citcoms
Revision 5992bf0133c1abd57bd9318a743532f875a2603b authored by Rajesh Kommu on 05 March 2014, 00:26:55 UTC, committed by Rajesh Kommu on 05 March 2014, 00:26:55 UTC
Added missing parameters to the Py2C conversion tool Cookbook 4 has been fixed to get rid of the "solver not converging" warnings.
1 parent 83b32f9
Tip revision: 5992bf0133c1abd57bd9318a743532f875a2603b authored by Rajesh Kommu on 05 March 2014, 00:26:55 UTC
Added the LaTex source for the manual.
Added the LaTex source for the manual.
Tip revision: 5992bf0
Makefile
# Makefile.in generated by automake 1.13.3 from Makefile.am.
# examples/Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
# $Id$
am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/CitcomS
pkgincludedir = $(includedir)/CitcomS
pkglibdir = $(libdir)/CitcomS
pkglibexecdir = $(libexecdir)/CitcomS
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-unknown-linux-gnu
host_triplet = x86_64-unknown-linux-gnu
subdir = examples
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
$(nobase_dist_examples_DATA) README
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/cit_hdf.m4 \
$(top_srcdir)/m4/cit_mpi.m4 $(top_srcdir)/m4/cit_python.m4 \
$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
am__installdirs = "$(DESTDIR)$(examplesdir)"
DATA = $(nobase_dist_examples_DATA)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /home/rakuko/CitcomS-GitHub-python_removal/aux-config/missing aclocal-1.13
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 1
AR = ar
AUTOCONF = ${SHELL} /home/rakuko/CitcomS-GitHub-python_removal/aux-config/missing autoconf
AUTOHEADER = ${SHELL} /home/rakuko/CitcomS-GitHub-python_removal/aux-config/missing autoheader
AUTOMAKE = ${SHELL} /home/rakuko/CitcomS-GitHub-python_removal/aux-config/missing automake-1.13
AWK = gawk
CC = mpicc
CCDEPMODE = depmode=gcc3
CFLAGS = -DH5_USE_16_API
CPP = mpicc -E
CPPFLAGS = -DUSE_GZDIR
CXX = mpicxx
CXXCPP = mpicxx -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = false
DSYMUTIL =
DUMPBIN =
ECHO_C =
ECHO_N = -n
ECHO_T =
EGREP = /bin/grep -E
EXEEXT =
FGREP = /bin/grep -F
GREP = /bin/grep
HC_HOME =
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /usr/bin/ld -m elf_x86_64
LDFLAGS =
LIBOBJS =
LIBS = -lm -lz -lhdf5
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO =
LN_S = ln -s
LTLIBOBJS =
MAKEINFO = ${SHELL} /home/rakuko/CitcomS-GitHub-python_removal/aux-config/missing makeinfo
MANIFEST_TOOL = :
MKDIR_P = /bin/mkdir -p
NM = /usr/bin/nm -B
NMEDIT =
OBJDUMP = objdump
OBJEXT = o
OTOOL =
OTOOL64 =
PACKAGE = CitcomS
PACKAGE_BUGREPORT = cig-mc@geodynamics.org
PACKAGE_NAME = CitcomS
PACKAGE_STRING = CitcomS 3.2.0
PACKAGE_TARNAME = CitcomS
PACKAGE_URL =
PACKAGE_VERSION = 3.2.0
PATH_SEPARATOR = :
PHDF5_HOME =
PYCONFIG =
PYTHON =
PYTHONPATH = /home/rakuko/91code/lib/python2.7/site-packages
PYTHON_BLDLIBRARY =
PYTHON_EGG_CFLAGS =
PYTHON_EGG_CPPFLAGS =
PYTHON_EGG_LDFLAGS =
PYTHON_EGG_LIBS =
PYTHON_EGG_PYXFLAGS =
PYTHON_EXEC_PREFIX =
PYTHON_INCDIR =
PYTHON_LA_LDFLAGS =
PYTHON_LDFLAGS =
PYTHON_LDLAST =
PYTHON_LDLIBRARY =
PYTHON_LIBDIR =
PYTHON_LIBP =
PYTHON_LIBPL =
PYTHON_LIBS =
PYTHON_LINKFORSHARED =
PYTHON_MODLIBS =
PYTHON_PLATFORM =
PYTHON_PREFIX =
PYTHON_SYSLIBS =
PYTHON_VERSION =
RANLIB = ranlib
SED = /bin/sed
SET_MAKE =
SHELL = /bin/bash
STRIP = strip
VERSION = 3.2.0
abs_builddir = /home/rakuko/CitcomS-GitHub-python_removal/examples
abs_srcdir = /home/rakuko/CitcomS-GitHub-python_removal/examples
abs_top_builddir = /home/rakuko/CitcomS-GitHub-python_removal
abs_top_srcdir = /home/rakuko/CitcomS-GitHub-python_removal
ac_ct_AR = ar
ac_ct_CC = mpicc
ac_ct_CXX = mpicxx
ac_ct_DUMPBIN =
am__include = include
am__leading_dot = .
am__quote =
am__tar = $${TAR-tar} chof - "$$tardir"
am__untar = $${TAR-tar} xf -
bindir = ${exec_prefix}/bin
build = x86_64-unknown-linux-gnu
build_alias =
build_cpu = x86_64
build_os = linux-gnu
build_vendor = unknown
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = x86_64-unknown-linux-gnu
host_alias =
host_cpu = x86_64
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/rakuko/CitcomS-GitHub-python_removal/aux-config/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = $(MKDIR_P)
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgpyexecdir =
pkgpythondir =
pkgsysconfdir =
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
pyexecdir =
pythondir =
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target_alias =
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
examplesdir = $(pkgdatadir)/examples
nobase_dist_examples_DATA = \
Cookbook1/cookbook1.cfg \
Cookbook2/cookbook2.cfg \
Cookbook3/cookbook3.cfg \
Cookbook4/cookbook4.cfg \
Cookbook4/coor.dat \
Cookbook5/cookbook5.cfg \
Cookbook5/coor.dat \
Cookbook5/ic/cookbook5.velo.0.0 \
Cookbook5/ic/cookbook5.velo.1.0 \
Cookbook5/velocity/bvel.dat0 \
Cookbook5/velocity/bvel.dat1 \
Cookbook5/velocity/bvel.dat10 \
Cookbook5/velocity/bvel.dat11 \
Cookbook5/velocity/bvel.dat12 \
Cookbook5/velocity/bvel.dat13 \
Cookbook5/velocity/bvel.dat14 \
Cookbook5/velocity/bvel.dat15 \
Cookbook5/velocity/bvel.dat16 \
Cookbook5/velocity/bvel.dat17 \
Cookbook5/velocity/bvel.dat18 \
Cookbook5/velocity/bvel.dat19 \
Cookbook5/velocity/bvel.dat2 \
Cookbook5/velocity/bvel.dat20 \
Cookbook5/velocity/bvel.dat21 \
Cookbook5/velocity/bvel.dat22 \
Cookbook5/velocity/bvel.dat23 \
Cookbook5/velocity/bvel.dat24 \
Cookbook5/velocity/bvel.dat25 \
Cookbook5/velocity/bvel.dat26 \
Cookbook5/velocity/bvel.dat27 \
Cookbook5/velocity/bvel.dat28 \
Cookbook5/velocity/bvel.dat29 \
Cookbook5/velocity/bvel.dat3 \
Cookbook5/velocity/bvel.dat30 \
Cookbook5/velocity/bvel.dat31 \
Cookbook5/velocity/bvel.dat32 \
Cookbook5/velocity/bvel.dat33 \
Cookbook5/velocity/bvel.dat34 \
Cookbook5/velocity/bvel.dat35 \
Cookbook5/velocity/bvel.dat36 \
Cookbook5/velocity/bvel.dat37 \
Cookbook5/velocity/bvel.dat38 \
Cookbook5/velocity/bvel.dat39 \
Cookbook5/velocity/bvel.dat4 \
Cookbook5/velocity/bvel.dat40 \
Cookbook5/velocity/bvel.dat41 \
Cookbook5/velocity/bvel.dat42 \
Cookbook5/velocity/bvel.dat43 \
Cookbook5/velocity/bvel.dat44 \
Cookbook5/velocity/bvel.dat45 \
Cookbook5/velocity/bvel.dat46 \
Cookbook5/velocity/bvel.dat47 \
Cookbook5/velocity/bvel.dat48 \
Cookbook5/velocity/bvel.dat49 \
Cookbook5/velocity/bvel.dat5 \
Cookbook5/velocity/bvel.dat50 \
Cookbook5/velocity/bvel.dat51 \
Cookbook5/velocity/bvel.dat52 \
Cookbook5/velocity/bvel.dat53 \
Cookbook5/velocity/bvel.dat54 \
Cookbook5/velocity/bvel.dat55 \
Cookbook5/velocity/bvel.dat56 \
Cookbook5/velocity/bvel.dat6 \
Cookbook5/velocity/bvel.dat7 \
Cookbook5/velocity/bvel.dat8 \
Cookbook5/velocity/bvel.dat9 \
Cookbook6/cookbook6.cfg \
Cookbook6/coord.dat \
Cookbook6/README \
Cookbook7/cookbook7.cfg \
Cookbook8/cookbook8.cfg \
Cookbook8/coord.dat \
Cookbook9/cookbook9.cfg \
Cookbook9/ic/cntn.velo.0.0 \
Cookbook9/ic/cntn.velo.1.0 \
Cookbook9/ic/embd.velo.0.0 \
Cookbook9/ic/embd.velo.1.0 \
Cookbook9/velocity/bvel.dat0 \
Cookbook9/velocity/bvel.dat1 \
example0.cfg \
example1.cfg \
Full/input.sample \
Full/machine.sample \
Full/velbc/README \
Full/velbc/velbc_full.tar.gz \
Regional/input.sample \
Regional/machines.sample \
Regional/velbc/README \
Regional/velbc/velbc_regional.tar.gz
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign examples/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign examples/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
install-nobase_dist_examplesDATA: $(nobase_dist_examples_DATA)
@$(NORMAL_INSTALL)
@list='$(nobase_dist_examples_DATA)'; test -n "$(examplesdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(examplesdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(examplesdir)" || exit 1; \
fi; \
$(am__nobase_list) | while read dir files; do \
xfiles=; for file in $$files; do \
if test -f "$$file"; then xfiles="$$xfiles $$file"; \
else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
test -z "$$xfiles" || { \
test "x$$dir" = x. || { \
echo " $(MKDIR_P) '$(DESTDIR)$(examplesdir)/$$dir'"; \
$(MKDIR_P) "$(DESTDIR)$(examplesdir)/$$dir"; }; \
echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(examplesdir)/$$dir'"; \
$(INSTALL_DATA) $$xfiles "$(DESTDIR)$(examplesdir)/$$dir" || exit $$?; }; \
done
uninstall-nobase_dist_examplesDATA:
@$(NORMAL_UNINSTALL)
@list='$(nobase_dist_examples_DATA)'; test -n "$(examplesdir)" || list=; \
$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
dir='$(DESTDIR)$(examplesdir)'; $(am__uninstall_files_from_dir)
tags TAGS:
ctags CTAGS:
cscope cscopelist:
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(DATA)
installdirs:
for dir in "$(DESTDIR)$(examplesdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am: install-nobase_dist_examplesDATA
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am:
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-nobase_dist_examplesDATA
.MAKE: install-am install-strip
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
cscopelist-am ctags-am distclean distclean-generic \
distclean-libtool distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-info install-info-am install-man \
install-nobase_dist_examplesDATA install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
uninstall-am uninstall-nobase_dist_examplesDATA
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Computing file changes ...