https://github.com/virtualagc/virtualagc
Revision 66d8e606a8d996ded60bc81d5edf319142a5fad9 authored by Ron Burkey on 04 October 2021, 11:49:55 UTC, committed by Ron Burkey on 04 October 2021, 11:49:55 UTC
Tip revision: 66d8e606a8d996ded60bc81d5edf319142a5fad9 authored by Ron Burkey on 04 October 2021, 11:49:55 UTC
Merge branch 'master' of https://github.com/virtualagc/virtualagc
Merge branch 'master' of https://github.com/virtualagc/virtualagc
Tip revision: 66d8e60
agc_debugger.c
/*
Copyright 2008,2016 Onno Hommes:1
This file is part of yaAGC.
yaAGC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
yaAGC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with yaAGC; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
In addition, as a special exception, permission is granted to
link the code of this program with the Orbiter SDK library (or with
modified versions of the Orbiter SDK library that use the same license as
the Orbiter SDK library), and distribute linked combinations including
the two. You must obey the GNU General Public License in all respects for
all of the code used other than the Orbiter SDK library. If you modify
this file, you may extend this exception to your version of the file,
but you are not obligated to do so. If you do not wish to do so, delete
this exception statement from your version.
Filename: agc_debugger.c
Purpose: This is module implements the debugger behavior.
Compiler: GNU gcc.
Contact: Onno Hommes
Reference: http://virtualagc.googlecode.com
Mods: 12/05/08 OH Began work.
07/01/09 OH Allow Address request using symbol
07/17/16 RSB A usage of the symbol 'Before'
was commented out since it wasn't
being used and was generating
compiler warnings.
08/01/16 RSB Initialized an uninitialized variable.
01/29/17 MAS Switched off the infinite loop check if
alarms aren't inhibited (so the TC Trap
can do its thing).
*/
#include <stdio.h>
#include <stdlib.h>
#include <ctype.h>
#include <string.h>
#include <signal.h>
#include "agc_cli.h"
#include "agc_help.h"
#include "agc_engine.h"
#include "agc_symtab.h"
#include "agc_debug.h"
#include "agc_debugger.h"
#include "agc_disassembler.h"
#include "agc_gdbmi.h"
#include "agc_simulator.h"
extern int SymbolTableSize;
extern Symbol_t *SymbolTable;
extern char *SourcePathName; /* Owned by agc_symtab */
static Debugger_t Debugger;
static Frame_t *Frames;
int LogCount = 0;
static int LogLast = -1;
// JMS: Variables pertaining to the symbol table loaded
int HaveSymbols = 0; // 1 if we have a symbol table
char *SymbolFile; // The name of the symbol table file
/* These globals will be deprecated when debugger is mature */
//int DebugMode;
FILE *FromFiles[MAX_FROMFILES];
FILE *LogFile = NULL;
int NumFromFiles = 1;
#define INT_MAIN 0
#define INT_TIMER6 1
#define INT_TIMER5 2
#define INT_TIMER3 3
#define INT_TIMER4 4
#define INT_KEYBD1 5
#define INT_KEYBD2 6
#define INT_UPLINK 7
#define INT_DNLINK 8
#define INT_RADAR 9
#define INT_JOYSTK 10
static char s1[129], s2[129], s3[129], s4[129], s5[129];
static int BreakPending = 0;
/* Prompt String
* Allow the prompt to be changed in gdb/mi mode
*/
char agcPrompt[16] = "(agc) ";
char s[129], sraw[129], slast[129];
Breakpoint_t Breakpoints[MAX_BREAKPOINTS];
int NumBreakpoints = 0;
/*
* My substitute for fgets, for use when stdin is unblocked.
*/
static void
rfgets (agc_t * State, char *Buffer, int MaxSize, FILE * fp)
{
int c = 0, Count = 0;
char *s;
MaxSize--;
while (1)
{
/* While waiting for character input, continue to look for client connects
* and disconnects.
*/
while ((fp != stdin && EOF == (c = fgetc (fp)))
|| (fp == stdin && Buffer != (s = nbfgets (Buffer, MaxSize))))
{
/* If we have redirected console input, and the file of source data is
* exhausted, then reattach the console.
*/
if (NumFromFiles > 1 && fp == FromFiles[NumFromFiles - 1])
{
NumFromFiles--;
//printf ("Keystroke source-file closed.\n");
if (NumFromFiles == 1)
{
// printf ("The keyboard has been reattached.\n> ");
}
fclose (fp);
fp = FromFiles[NumFromFiles - 1];
}
else
{
#ifdef WIN32
Sleep (10);
#else
struct timespec req, rem;
req.tv_sec = 0;
req.tv_nsec = 10000000;
nanosleep (&req, &rem);
#endif // WIN32
}
ChannelRoutine (State);
}
if (fp == stdin && s != NULL)
return;
Buffer[Count] = c;
if (c == '\n' || Count >= MaxSize)
{
Buffer[Count] = 0;
return;
}
Count++;
}
}
/**
* Put the Debugger into the Run state.
*/
void
DbgSetRunState (void)
{
Debugger.RunState = 1;
}
void
DbgDisplayVersion (void)
{
printf ("Apollo Guidance Computer simulation, ver. " NVER ", built "
__DATE__ " " __TIME__ "\n"
"Copyright (C) 2003-2009 Ronald S. Burkey, Onno Hommes.\n"
"yaAGC is free software, covered by the GNU General Public License, and you are\n"
"welcome to change it and/or distribute copies of it under certain conditions.\n");
printf (
"Refer to http://www.ibiblio.org/apollo/index.html for additional information.\n");
}
int
DbgHasBreakEvent ()
{
int BreakFlag = 0;
if (Debugger.State->PendFlag)
BreakFlag = 0;
else
{
if (SingleStepCounter == 0)
{
// if(Debugger.RunState) printf ("Stepped.\n");
BreakFlag = 1;
}
else
{
int Value;
Value = DbgGetFromZ (Debugger.State);
/* Detect certain types of impending infinite loops. */
if (InhibitAlarms && !(Value & 0177777) && !Debugger.State->Erasable[0][0])
{
/* Infinite Loop break on next instruction */
BreakFlag = DebugMode = 1;
}
else
{
if (SingleStepCounter > 0)
SingleStepCounter--;
if (DebugMode)
BreakFlag = DbgMonitorBreakpoints ();
}
}
}
if (BreakPending)
{
BreakPending = 0;
BreakFlag = 1;
}
return BreakFlag;
}
/**
* Delete a breakpoint from the debugger based on the BreapointId
* \param The breakpoint identifier
*/
void
DbgDeleteBreakpoint (int bp)
{
int i, j;
for (i = 0; i < NumBreakpoints; i++)
if (Breakpoints[i].Id == bp)
{
NumBreakpoints--;
for (j = i; j < NumBreakpoints; j++)
{
Breakpoints[j] = Breakpoints[j + 1];
}
break;
}
}
void
DbgHitBreakpoint (Breakpoint_t* bp)
{
bp->Hits++;
if (bp->Disposition == BP_DELETE)
{
DbgDeleteBreakpoint (bp->Id);
}
}
/* Normalize data in s and return sraw pointer */
char *
DbgNormalizeCmdString (char *s)
{
int i;
char *ss;
/* Normalize the strings by getting rid of leading, trailing
or duplicated spaces. */
i = sscanf (s, "%s%s%s%s%s", s1, s2, s3, s4, s5);
if (i == 1)
strcpy (s, s1);
else if (i == 2)
sprintf (s, "%s %s", s1, s2);
else if (i == 3)
sprintf (s, "%s %s %s", s1, s2, s3);
else if (i == 4)
sprintf (s, "%s %s %s %s", s1, s2, s3, s4);
else if (i == 5)
sprintf (s, "%s %s %s %s %s", s1, s2, s3, s4, s5);
else
s[0] = 0;
strcpy (sraw, s);
for (ss = s; *ss; *ss = toupper (*ss), ss++)
;
return sraw;
}
/*
* Get the value stored at an address, as specified by a Breakpoint_t.
*/
unsigned short
DbgGetWatch (agc_t * State, Breakpoint_t * bp)
{
int Address12, vRegBB;
Address12 = (bp->Address12 & 07777);
vRegBB = (bp->vRegBB & 07777);
int16_t Value = 0;
/* First check if it is fixed erasable */
if (Address12 <= 01377)
{
Value = (State->Erasable[Address12 / 0400][Address12 & 0377]);
}
/* Check if it is Switched erasable */
else if (Address12 <= 01777)
{
Value = (State->Erasable[vRegBB & 07][Address12 & 0377]);
}
/* Return value of address or default 0 */
return (Value);
}
/*
* Gets the value at the instruction pointer. The INDEX is automatically added,
* and the Extracode bit is used as the 16th bit.
*/
int
DbgGetFromZ (agc_t * State)
{
int CurrentZ, Bank, Value;
CurrentZ = (State->Erasable[0][RegZ] & 07777);
// Print the address.
if (CurrentZ < 01400)
{
Bank = CurrentZ / 0400;
Value = State->Erasable[Bank][CurrentZ & 0377];
}
else if (CurrentZ >= 04000)
{
Bank = 2 + (CurrentZ - 04000) / 02000;
Value = State->Fixed[Bank][CurrentZ & 01777];
}
else if (CurrentZ < 02000)
{
Bank = (7 & State->Erasable[0][RegBB]);
Value = State->Erasable[Bank][CurrentZ & 0377];
}
else
{
Bank = (31 & (State->Erasable[0][RegBB] >> 10));
if (0x18 == (Bank & 0x18) && (State->OutputChannel7 & 0100))
{
Bank += 0x08;
}
Value = State->Fixed[Bank][CurrentZ & 01777];
}
Value = OverflowCorrected (
AddSP16 (SignExtend (Value), SignExtend (State->IndexValue)));
Value = (Value & 077777);
/* Extracode? */
if (State->ExtraCode)
Value |= 0100000;
/* Indexed? */
if (State->IndexValue)
Value |= 0200000;
/* Positive overflow? */
if (0040000 == (0140000 & State->Erasable[0][RegA]))
Value |= 0400000;
/* Negative overflow? */
if (0100000 == (0140000 & State->Erasable[0][RegA]))
Value |= 01000000;
/* Sign of Accumulator */
if (0 != (0100000 & State->Erasable[0][RegA]))
Value |= 02000000;
/* Signs of Accumulator and L disagree. */
if (0 != (0100000 & (State->Erasable[0][RegL] ^ State->Erasable[0][RegA])))
{
Value |= 04000000;
}
/* Inside of an ISR? */
if (State->InIsr)
Value |= 010000000;
return (Value);
}
/**
* The Frames array is used to cache and look up the Frame Labels
* when trying to display the frame trace or current location
*/
static Frame_t *
DbgInitFrameData (void)
{
int i;
unsigned LinearAddr;
if (Debugger.HaveSymbols)
{
char *FrameName = NULL;
Symbol_t *Symbol;
Frames = (Frame_t *) malloc (38912 * sizeof(Frame_t));
if (Frames)
{
/* First Clean Frames */
for (i = 0; i < 38912; i++)
Frames[i].Name = NULL;
/* Vecter Table Frames */
Frames[0].Name = "MAIN";
Frames[4].Name = "TIMER6";
Frames[8].Name = "TIMER5";
Frames[12].Name = "TIMER3";
Frames[16].Name = "TIMER4";
Frames[20].Name = "KEYBD1";
Frames[24].Name = "KEYBD2";
Frames[28].Name = "UPLINK";
Frames[32].Name = "DNLINK";
Frames[36].Name = "RADAR";
Frames[40].Name = "JOYSTK";
/* First find all the Labels and Populate Frames */
for (i = 0; i < SymbolTableSize; i++)
{
Symbol = &SymbolTable[i];
if (Symbol->Type == SYMBOL_LABEL)
{
LinearAddr = DbgLinearFixedAddr (Symbol->Value.SReg,
Symbol->Value.FB,
Symbol->Value.Super);
Frames[LinearAddr - 2048].Name = Symbol->Name;
}
}
/* Next Fill all the remaining Empty Frames */
for (i = 0; i < 38912; i++)
{
if (Frames[i].Name != NULL)
FrameName = Frames[i].Name;
else
Frames[i].Name = FrameName;
}
}
}
return (Frames);
}
char *
DbgGetFrameNameByAddr (unsigned LinearAddr)
{
char *FrameName = NULL;
if (LinearAddr >= 2048 && LinearAddr < 40960)
FrameName = Frames[LinearAddr - 2048].Name;
return (FrameName);
}
/**
* Return the symbol line of the head of the current stack
*/
SymbolLine_t *
DbgResolveCurrentLine (void)
{
int CurrentZ = Debugger.State->Erasable[0][RegZ] & 07777;
int FB = 037 & (Debugger.State->Erasable[0][RegBB] >> 10);
int SBB = (Debugger.State->OutputChannel7 & 0100) ? 1 : 0;
return (ResolveLineAGC (CurrentZ, FB, SBB));
}
/**
* This function returns the frame name offset which is the offset in words
* from the start of the function. In the case of the AGC assembly this
* means the offset counted in words since the last label definition. Since
* The label is used as the frame name this allows the disassembly command
* to build the <FrameName+Offset> string. Examples
* <DOFSTART+00> The frame is at the same address as the label definition.
* <GOPROG+12> The frame is 12 words passed the address of GOPROG
*
* The Offset can only be calculated if the symbols were loaded. In all other
* cases the Offset will be 0.
*
* \param[in] LinearAddr A Pseudo linear address
* \retval The offset of the frame name.
*/
int
DbgGetFrameNameOffsetByAddr (unsigned LinearAddr)
{
int Offset = 0;
char *FrameName;
/* Get the Frame Name for the current address */
FrameName = DbgGetFrameNameByAddr (LinearAddr);
/* Start counting until the Frame Name changes which gives the offset */
while (FrameName == DbgGetFrameNameByAddr (--LinearAddr))
++Offset;
/* Do the obvious and return the calculated offset */
return (Offset);
}
/**
* This function returns the current value of the program counter which is the
* address of next instruction to be executed.
*
* /retval The current program counter (PC)
*/
unsigned
DbgGetCurrentProgramCounter (void)
{
int CurrentZ = Debugger.State->Erasable[0][RegZ] & 07777;
int FB = 037 & (Debugger.State->Erasable[0][RegBB] >> 10);
int SBB = (Debugger.State->OutputChannel7 & 0100) ? 1 : 0;
return (DbgLinearFixedAddr (CurrentZ, FB, SBB));
}
/**
* Catch the SIGINT Signal to stop running and return to debug mode
*/
static void
DbgCatchSignal (int sig)
{
BreakPending = 1; /* Make sure Break only happens when we want it */
nbfgets_ready (agcPrompt);
signal (sig, DbgCatchSignal);
}
int
DbgInitialize (Options_t * Options, agc_t * State)
{
Debugger.Options = Options;
Debugger.RunState = 0;
Debugger.State = State;
/* Will remove these variables when debugger is mature */
SingleStepCounter = 0;
DebugMode = 1;
/* if the symbolfile is provided load the symbol table */
if (Options->symtab)
{
/* Set the old global vars */
SymbolFile = Options->symtab;
HaveSymbols = 1;
/* Reset and attempt to load the symbol table */
ResetSymbolTable ();
if (ReadSymbolTable (Options->symtab))
HaveSymbols = 0; /* Default is 0 */
/* In the future Have Symbols will only be used by the Debugger */
Debugger.HaveSymbols = HaveSymbols;
DbgInitFrameData ();
}
/* setvbuf (stdout, OutBuf, _IOLBF, sizeof (OutBuf)); */
FromFiles[0] = stdin;
/* Allow a command file to be used with initial debugger commands */
if (Options->fromfile != NULL)
{
if (NumFromFiles < MAX_FROMFILES)
{
FromFiles[NumFromFiles] = fopen (Options->fromfile, "r");
if (FromFiles[NumFromFiles] != NULL)
NumFromFiles++;
}
}
/* If a new source path is given then apply this to prevent the
* default source path from the symbol table to be used.
*/
if (Options->directory != NULL)
SourcePathName = Options->directory;
/* Add the AGC starting point */
BacktraceAdd (State, 0);
/* Register the SIGINT to be handled by AGC Debugger */
signal (SIGINT, DbgCatchSignal);
return 0;
}
int
DbgMonitorBreakpoints (void)
{
int Break;
int CurrentZ;
int CurrentBB;
int i;
int Value;
SymbolLine_t *Line;
Value = DbgGetFromZ (Debugger.State);
CurrentZ = Debugger.State->Erasable[0][RegZ];
CurrentBB = (Debugger.State->Erasable[0][RegBB] & 076007)
| (Debugger.State->InputChannel[7] & 0100);
for (Break = i = 0; i < NumBreakpoints; i++)
{
Line = Breakpoints[i].Line;
if (Breakpoints[i].WatchBreak == 2
&& DbgCheckBreakpoint (&Breakpoints[i]))
{
// Pattern!
if (Breakpoints[i].Address12 == (Value & Breakpoints[i].vRegBB))
{
printf ("Hit pattern, Value=" PAT " Mask=" PAT
".\n",
Breakpoints[i].Address12, Breakpoints[i].vRegBB);
DbgHitBreakpoint (&Breakpoints[i]);
Break = 1;
break;
}
}
else if (Breakpoints[i].WatchBreak == 0
&& DbgCheckBreakpoint (&Breakpoints[i]))
{
int Address12, vRegBB;
int CurrentFB, vCurrentFB;
Address12 = Breakpoints[i].Address12;
if (Address12 != CurrentZ)
continue;
if (Address12 < 01400)
{
GdbmiDisplayBreakpointForLine (Line, i + 1);
DbgHitBreakpoint (&Breakpoints[i]);
Break = 1;
break;
}
if (Address12 >= 04000)
{
GdbmiDisplayBreakpointForLine (Line, i + 1);
DbgHitBreakpoint (&Breakpoints[i]);
Break = 1;
break;
}
vRegBB = Breakpoints[i].vRegBB;
if (Address12 >= 01400 && Address12 < 02000
&& (vRegBB & 7) == (CurrentBB & 7))
{
// JMS: I'm not convinced yet that we can have a
// breakpoint in erasable memory that has a symbol
if (Breakpoints[i].Symbol != NULL)
printf ("Hit breakpoint %s at E%o,%05o.\n",
Breakpoints[i].Symbol->Name, CurrentBB & 7, Address12);
else
printf ("Hit breakpoint at E%o,%05o.\n", CurrentBB & 7,
Address12);
DbgHitBreakpoint (&Breakpoints[i]);
Break = 1;
break;
}
CurrentFB = (CurrentBB >> 10) & 037;
if (CurrentFB >= 030 && (CurrentBB & 0100))
CurrentFB += 010;
vCurrentFB = (vRegBB >> 10) & 037;
if (vCurrentFB >= 030 && (vRegBB & 0100))
vCurrentFB += 010;
if (Address12 >= 02000 && Address12 < 04000
&& CurrentFB == vCurrentFB)
{
int Bank;
Bank = (CurrentBB >> 10) & 037;
if (0 != (CurrentBB & 0100) && Bank >= 030)
Bank += 010;
// if (Breakpoints[i].Symbol != NULL)
// printf ("Hit breakpoint %s at %02o,%05o.\n",
// Breakpoints[i].Symbol->Name, Bank, Address12);
// else
// printf ("Hit breakpoint ot %02o,%05o.\n", Bank, Address12);
GdbmiDisplayBreakpointForLine (Line, i + 1);
DbgHitBreakpoint (&Breakpoints[i]);
Break = 1;
break;
}
}
else if ((Breakpoints[i].WatchBreak == 1
&& DbgCheckBreakpoint (&Breakpoints[i])
&& Breakpoints[i].WatchValue
!= DbgGetWatch (Debugger.State, &Breakpoints[i]))
|| (Breakpoints[i].WatchBreak == 3
&& Breakpoints[i].WatchValue
== DbgGetWatch (Debugger.State, &Breakpoints[i])))
{
int Address12, vRegBB, Before, After;
Address12 = Breakpoints[i].Address12;
Before = (Breakpoints[i].WatchValue & 077777);
After = (DbgGetWatch (Debugger.State, &Breakpoints[i]) & 077777);
if (Address12 < 01400)
{
if (Breakpoints[i].Symbol != NULL)
printf ("Hit watchpoint %s at %05o, %06o -> %06o.\n",
Breakpoints[i].Symbol->Name, Address12, Before, After);
else
printf ("Hit watchpoint at %05o, %06o -> %06o.\n", Address12,
Before, After);
if (Breakpoints[i].WatchBreak == 1)
Breakpoints[i].WatchValue = DbgGetWatch (Debugger.State,
&Breakpoints[i]);
DbgHitBreakpoint (&Breakpoints[i]);
Break = 1;
break;
}
vRegBB = Breakpoints[i].vRegBB;
if (Address12 >= 01400 && Address12 < 02000
&& (vRegBB & 7) == (CurrentBB & 7))
{
if (Breakpoints[i].Symbol == NULL)
printf ("Hit watchpoint at E%o,%05o, %06o -> %06o.\n",
CurrentBB & 7, Address12, Before, After);
else
printf ("Hit watchpoint %s at E%o,%05o, %06o -> %06o.\n",
Breakpoints[i].Symbol->Name, CurrentBB & 7, Address12,
Before, After);
if (Breakpoints[i].WatchBreak == 1)
Breakpoints[i].WatchValue = DbgGetWatch (Debugger.State,
&Breakpoints[i]);
DbgHitBreakpoint (&Breakpoints[i]);
Break = 1;
break;
}
}
else if ((Breakpoints[i].WatchBreak == 4
&& DbgCheckBreakpoint (&Breakpoints[i])
&& Breakpoints[i].WatchValue
!= DbgGetWatch (Debugger.State, &Breakpoints[i])))
{
int Address12, vRegBB, /*Before,*/After;
Address12 = Breakpoints[i].Address12;
//Before = (Breakpoints[i].WatchValue & 077777);
After = (DbgGetWatch (Debugger.State, &Breakpoints[i]) & 077777);
if (Address12 < 01400)
{
if (Breakpoints[i].Symbol != NULL)
printf ("%s=%06o\n", Breakpoints[i].Symbol->Name, After);
else
printf ("(%05o)=%06o\n", Address12, After);
Breakpoints[i].WatchValue = DbgGetWatch (Debugger.State,
&Breakpoints[i]);
}
else
{
vRegBB = Breakpoints[i].vRegBB;
if (Address12 >= 01400 && Address12 < 02000
&& (vRegBB & 7) == (CurrentBB & 7))
{
if (Breakpoints[i].Symbol == NULL)
printf ("(E%o,%05o)=%06o\n", CurrentBB & 7, Address12,
After);
else
printf ("%s=%06o\n", Breakpoints[i].Symbol->Name, After);
Breakpoints[i].WatchValue = DbgGetWatch (Debugger.State,
&Breakpoints[i]);
}
}
}
}
return (Break);
}
int
DbgCheckBreakpoint (Breakpoint_t* bp)
{
return (bp->Enable == 'y');
}
void
DbgDisplayInnerFrame (void)
{
// If we have the symbol table, then print out the actual source,
// rather than just a disassembly
if (Debugger.Options->symtab && Debugger.HaveSymbols)
{
// Resolve the current program counter into an entry into
// the program line table. We pass in the current value of
// the Z register, but also need the BB register and the
// super-bank bit to resolve addresses.
int CurrentZ = Debugger.State->Erasable[0][RegZ] & 07777;
int FB = 037 & (Debugger.State->Erasable[0][RegBB] >> 10);
int SBB = (Debugger.State->OutputChannel7 & 0100) ? 1 : 0;
/* Get the SymbolLine for the InnerFrame */
SymbolLine_t *Line = ResolveLineAGC (CurrentZ, FB, SBB);
// There are several ways this can fail, and if either does we
// just want to disasemble: if we didn't find the line in the
// table or if ListSource() fails.
if (Line)
{
/* Load the actual Source Line */
LoadSourceLine (Line->FileName, Line->LineNumber);
if (Debugger.RunState)
{
if (Debugger.Options->fullname)
GdbmiPrintFullNameFrame (Line);
else
GdbmiPrintSourceFrame (Line);
}
}
}
else
Disassemble (Debugger.State);
}
Address_t
DbgNativeAddr (unsigned linear_addr)
{
Address_t agc_addr;
if (linear_addr > 0117777)
{
agc_addr.Invalid = 1;
agc_addr.Address = 0;
}
else if (linear_addr > 07777) /* Must be Common Fixed */
{
agc_addr.Banked = 1;
agc_addr.Unbanked = 0;
agc_addr.Address = 1;
agc_addr.Invalid = 0;
agc_addr.Fixed = 1;
agc_addr.Erasable = 0;
agc_addr.FB = (linear_addr - 010000) / 02000;
agc_addr.SReg = (linear_addr - agc_addr.FB * 02000) - 06000;
if (agc_addr.FB > 037) /* Do we need to set the Extension Bit */
{
agc_addr.FB = agc_addr.FB - 010;
agc_addr.Super = 01;
}
else
agc_addr.Super = 0;
}
else if (linear_addr > 03777) /* Must be Fixed Fixed */
{
agc_addr.Banked = 0;
agc_addr.Unbanked = 1;
agc_addr.Address = 1;
agc_addr.Invalid = 0;
agc_addr.Fixed = 1;
agc_addr.Erasable = 0;
agc_addr.FB = linear_addr / 02000; /* Allows for faster Value access later */
agc_addr.Super = 0;
agc_addr.SReg = linear_addr;
}
else /* Map to Eraseable memory */
{
agc_addr.Banked = 1;
agc_addr.Unbanked = 0;
agc_addr.Address = 1;
agc_addr.Invalid = 0;
agc_addr.Fixed = 0;
agc_addr.Erasable = 1;
agc_addr.EB = linear_addr / 0400; /* Allows for faster Value access later */
agc_addr.SReg = linear_addr - agc_addr.EB * 0400 + 01400;
}
return agc_addr;
}
/**
* Return the Virtual Linear Pseudo address. According to
* AGC Memo #9 page 5. with the exception of Fixed banked
* 02 and 03; I kept linear address 014000-017777 this
* way you can still notice you were dealing with a banked
* address. However the value for address 04000 and 14000
* will give you the same result.
*/
unsigned
DbgLinearAddr (Address_t * agc_addr)
{
unsigned LinearAddress = ~((unsigned) 0); /* Default invalid Address */
if (agc_addr->SReg < 01400) /* Must be Unbanked Eraseable */
{
LinearAddress = agc_addr->SReg;
}
else if (agc_addr->SReg < 02000) /* Must be Banked Eraseable */
{
LinearAddress = agc_addr->EB * 0400 + agc_addr->SReg - 01400;
}
else if (agc_addr->SReg < 04000) /* Must be Banked fixed memory */
{
if (agc_addr->FB < 030)
LinearAddress = 06000 + agc_addr->FB * 02000 + agc_addr->SReg;
else
LinearAddress = 06000 + (agc_addr->FB + agc_addr->Super * 010) * 02000
+ agc_addr->SReg;
}
else if (agc_addr->SReg < 07777) /* Must be fixed fixed */
{
LinearAddress = agc_addr->SReg;
}
return LinearAddress;
}
unsigned
DbgLinearFixedAddr (unsigned agc_sreg, unsigned agc_fb, unsigned agc_super)
{
Address_t agc_addr;
agc_addr.Fixed = 1;
agc_addr.Banked = 1;
agc_addr.SReg = agc_sreg;
agc_addr.FB = agc_fb;
agc_addr.Super = agc_super;
return DbgLinearAddr (&agc_addr);
}
unsigned
DbgLinearEraseableAddr (unsigned agc_sreg, unsigned agc_eb)
{
Address_t agc_addr;
agc_addr.Erasable = 1;
agc_addr.Banked = 1;
agc_addr.SReg = agc_sreg;
agc_addr.EB = agc_eb;
return DbgLinearAddr (&agc_addr);
}
unsigned short
DbgGetValueByAddress (unsigned gdbmi_addr)
{
Address_t agc_addr;
unsigned short Value = 0;
/* if in Eraseable use Eraseable value */
agc_addr = DbgNativeAddr (gdbmi_addr);
if (agc_addr.Erasable == 1)
{
Value = Debugger.State->Erasable[agc_addr.EB][agc_addr.SReg - 01400];
}
else /* Must be fixed memory */
{
if (agc_addr.Unbanked == 1) /* Check for Fixed Fixed */
{
/* remember the FB should already be fine (see gdbmiNativeAddr */
Value = Debugger.State->Fixed[agc_addr.FB][agc_addr.SReg - 04000];
}
else /* This is Common Fixed */
{
Value =
Debugger.State->Fixed[agc_addr.FB + agc_addr.Super * 010][agc_addr.SReg
- 02000];
}
}
return Value;
}
/**
* This function returns the linear pseudo address based on an address string
* The address string could be the string representation of a linear address
* or be the original AGC see bank address string.
*
* Examples:
* 0x800 is a hex linear address
* 04000 is an octal linear address
* 2048 is a decimal linear address
* 12,2345 is a banked fixed address
* E4,1456 is a banked switched address
*
* Notice that for the original AGC addressing you can't use the notation for
* unswitched or common fixed memory. However these locations are also
* accessible in the switched region. The term pseudo address from from
* the original AGC memo.
*/
unsigned
DbgLinearAddrFromAddrStr (char *addr_str)
{
unsigned Address = ~((unsigned) 0);
unsigned Bank, SReg;
Symbol_t *Symbol = NULL;
Address_t *agc_addr;
/* First determine if this address is a pseudo address or a banked
* address by checking the existence of a comma (i.e. banked address )
*/
if (strstr (addr_str, ",") != NULL)
{
/* Try Eraseable translation first then fixed */
if (2 == sscanf (addr_str, "E%o,%o", &Bank, &SReg))
{
/* Validate Bank and SReg for Eraseable Memory */
if (Bank < 8)
Address = DbgLinearEraseableAddr (SReg, Bank);
}
else if (2 == sscanf (addr_str, "%o,%o", &Bank, &SReg))
{
/* Validate Bank and SReg for Fixed Memory */
if (Bank < 044)
Address = DbgLinearFixedAddr (SReg, Bank, 0);
}
}
else if (strstr (addr_str, "&") != NULL)
{
/* Looks like a symbol based address */
addr_str++;
Symbol = ResolveSymbol (addr_str,
SYMBOL_VARIABLE | SYMBOL_REGISTER | SYMBOL_CONSTANT);
if (Symbol)
{
agc_addr = &Symbol->Value;
Address = DbgLinearAddr (agc_addr);
}
}
else
Address = strtol (addr_str, 0, 0); /* It is a pseudo address */
return Address;
}
void
DbgSetValueByAddress (unsigned gdbmi_addr, unsigned short value)
{
Address_t agc_addr;
agc_addr = DbgNativeAddr (gdbmi_addr);
if (agc_addr.Erasable == 1)
{
Debugger.State->Erasable[agc_addr.EB][agc_addr.SReg - 01400] = value;
}
else /* Must be fixed memory */
{
if (agc_addr.Unbanked == 1) /* Check for Fixed Fixed */
{
/* remember the FB should already be fine (see gdbmiNativeAddr */
Debugger.State->Fixed[agc_addr.FB][agc_addr.SReg - 04000] = value;
}
else /* This is Common Fixed */
{
Debugger.State->Fixed[agc_addr.FB + agc_addr.Super * 010][agc_addr.SReg
- 02000] = value;
}
}
}
void
DbgDisplayPrompt (void)
{
if (NumFromFiles == 1)
{
// JMS: Tell the thread which is actually reading the input from
// stdin to actually go ahead and read. At this point, we know that
// the last debugging command has been processed.
printf ("%s", agcPrompt);
fflush (stdout);
nbfgets_ready (agcPrompt);
}
}
char *
DbgGetCmdString (void)
{
strcpy (slast, sraw);
s[sizeof(s) - 1] = 0;
rfgets (Debugger.State, s, sizeof(s) - 1, FromFiles[NumFromFiles - 1]);
/* Use last command if just newline */
if (strlen (s) == 0)
strcpy (s, slast);
return s;
}
static void
DbgProcessLog ()
{
if (LogFile != NULL)
{
int Bank, Address, NewLast;
Bank = 077777
& (((Debugger.State->Erasable[0][RegBB])
| Debugger.State->OutputChannel7));
Address = 077777 & (Debugger.State->Erasable[0][RegZ]);
NewLast = (Bank << 15) | Address;
if (NewLast != LogLast)
{
LogLast = NewLast;
fprintf (LogFile, "%05o %05o\n", Bank, Address);
LogCount--;
if (LogCount <= 0)
{
fclose (LogFile);
LogFile = NULL;
printf ("Logging completed.\n");
}
}
}
}
extern int DebuggerInterruptMasks[11];
int
DbgExecute ()
{
char *s;
char *sraw;
int Break;
int PatternValue, PatternMask;
int i, j;
//char FileName[MAX_FILE_LENGTH + 1];
char SymbolName[129];
Break = DbgHasBreakEvent ();
if (Break && !DebugDsky)
{
// char OverflowChar, OverflowCharQ;
SingleStepCounter = -1;
DbgDisplayInnerFrame ();
while (1)
{
/* Display the AGC prompt */
DbgDisplayPrompt ();
/* Read the Command String */
s = DbgGetCmdString ();
/* Get rid of leading,trailing or duplicated spaces but keep backup */
sraw = DbgNormalizeCmdString (s);
/* Update Simulator Time */
SimUpdateTime ();
if (s[0] == '#' || s[0] == 0)
continue;
if (GdbmiHelp (s) > 0) continue;
else if (1 == sscanf (s, "LOG%d", &i))
{
if (LogFile != NULL)
printf ("Logging is already in progress.\n");
else
{
LogFile = fopen ("yaAGC.log", "w");
if (LogFile == NULL)
printf ("The log file cannot be created.\n");
else if (i < 1)
{
printf ("Log count out of range.\n");
fclose (LogFile);
LogFile = NULL;
}
else
LogCount = i;
}
}
else if (!strncmp (s, "FROMFILE ", 9))
{
if (NumFromFiles < MAX_FROMFILES)
{
FromFiles[NumFromFiles] = fopen (&sraw[9], "r");
if (FromFiles[NumFromFiles] == NULL)
printf ("Cannot open keystroke file \"%s\".\n", &sraw[9]);
else
{
NumFromFiles++;
printf ("Now taking keystrokes from \"%s\".\n", &sraw[9]);
}
}
else
printf (
"Too many nested FROMFILE commands, discarding \"%s\".\n",
&sraw[9]);
}
else if (1 == sscanf (s, "STEP%o", &i)
|| 1 == sscanf (s, "NEXT%o", &i))
{
Debugger.RunState = 1;
if (i >= 1)
SingleStepCounter = i - 1;
else
printf ("The step-count must be 1 or greater.\n");
break;
}
else if (!strcmp (s, "STEP") || !strcmp (s, "NEXT")
|| !strcmp (s, "S") || !strcmp (s, "N"))
{
Debugger.RunState = 1;
SingleStepCounter = 0;
break;
}
// else if (!strcmp (s, "QUIT") || !strcmp (s, "EXIT"))
// return (0);
else if (!strncmp (s, "SYMBOL-FILE", 11))
{
char Dummy[12];
// JMS: We need to use the raw formatted string because
// we need to preserve case for the file name
if (2 == sscanf (sraw, "%s %s", Dummy, SymbolFile))
{
ResetSymbolTable ();
if (!ReadSymbolTable (SymbolFile))
HaveSymbols = 1;
else
HaveSymbols = 0;
}
}
else if (1 == sscanf (s, "SYM-DUMP%s", SymbolName))
{
// JMS: Dumps the symbols to the screen
if (HaveSymbols)
DumpSymbols (SymbolName, ARCH_AGC);
else
printf ("No symbol table loaded.\n");
}
// else if (1 == sscanf (s, "FILES%s", FileName))
// {
// // JMS: 07.30
// // Dumps the files to the screen
// if (HaveSymbols)
// DumpFiles (FileName);
// else
// printf ("No symbol table loaded.\n");
// }
else if (2 == sscanf (s, "DELETE%o%o", &i, &j))
{
PatternValue = (i & PATTERN_SIZE);
PatternMask = (j & PATTERN_SIZE);
for (i = 0; i < NumBreakpoints; i++)
if (Breakpoints[i].WatchBreak == 2
&& Breakpoints[i].Address12 == PatternValue
&& Breakpoints[i].vRegBB == PatternMask)
{
printf ("Pattern " PAT "," PAT
" has been deleted.\n",
PatternValue, PatternMask);
NumBreakpoints--;
for (; i < NumBreakpoints; i++)
Breakpoints[i] = Breakpoints[i + 1];
i = -1;
break;
}
if (i != -1)
printf ("Pattern not found.\n");
}
else if (2 == sscanf (s, "PATTERN%o%o", &i, &j))
{
PatternValue = (i & PATTERN_SIZE);
PatternMask = (j & PATTERN_SIZE);
// First, see if the pattern has already been defined.
for (i = 0; i < NumBreakpoints; i++)
if (Breakpoints[i].WatchBreak == 2
&& Breakpoints[i].Address12 == PatternValue
&& Breakpoints[i].vRegBB == PatternMask)
{
printf ("This pattern has already been defined.\n");
break;
}
if (i == NumBreakpoints)
{
if (NumBreakpoints >= MAX_BREAKPOINTS)
printf ("The maximum number of breakpoints/watchpoints/"
"patterns has already been reached.\n");
else
{
printf ("Setting pattern " PAT "," PAT ".\n",
PatternValue, PatternMask);
Breakpoints[NumBreakpoints].WatchBreak = 2;
Breakpoints[NumBreakpoints].Address12 = PatternValue;
Breakpoints[NumBreakpoints].Symbol = NULL;
Breakpoints[NumBreakpoints].Line = NULL;
Breakpoints[NumBreakpoints].vRegBB = PatternMask;
NumBreakpoints++;
}
}
}
// else if (!strcmp (s, "CONT") || !strcmp (s, "RUN"))
// {
// /* Only print the thread info if debugevents are on */
// Debugger.RunState = 1;
// break;
// }
else if (!strncmp (s, "COREDUMP ", 9))
MakeCoreDump (Debugger.State, &sraw[9]);
// else if (!strcmp (s, "INTERRUPTS"))
// {
// if (!DebuggerInterruptMasks[0])
// printf ("The debugger is blocking all interrupts.\n");
// else
// printf ("The debugger is allowing interrupts.\n");
// printf ("Debugger interrupt mask:");
// for (i = 1; i <= NUM_INTERRUPT_TYPES; i++)
// printf (" %d", !DebuggerInterruptMasks[i]);
// printf ("\n");
// printf ("Interrupt-request flags:");
// for (i = 1; i <= NUM_INTERRUPT_TYPES; i++)
// printf (" %d", State.InterruptRequests[i]);
// printf ("\n");
// if (State.InIsr)
// printf ("In ISR #%d.\n", State.InterruptRequests[0]);
// else
// printf ("Last ISR: #%d.\n",
// State.InterruptRequests[0]);
// }
else if (1 == sscanf (s, "INTON%d", &i))
{
if (i < 1 || i > NUM_INTERRUPT_TYPES)
printf ("Only interrupt types 1 to %d are used.\n",
NUM_INTERRUPT_TYPES);
else if (Debugger.State->InterruptRequests[i])
printf ("Interrupt %d already requested.\n", i);
else
{
printf ("Interrupt %d request-flag set.\n", i);
Debugger.State->InterruptRequests[i] = 1;
}
}
else if (1 == sscanf (s, "INTOFF%d", &i))
{
if (i < 1 || i > NUM_INTERRUPT_TYPES)
printf ("Only interrupt types 1 to %d are used.\n",
NUM_INTERRUPT_TYPES);
else if (!Debugger.State->InterruptRequests[i])
printf ("Interrupt %d not requested.\n", i);
else
{
printf ("Interrupt %d request-flag cleared.\n", i);
Debugger.State->InterruptRequests[i] = 0;
}
}
else if (1 == sscanf (s, "MASKON%d", &i))
{
if (i < 0 || i > NUM_INTERRUPT_TYPES)
printf ("Only interrupt types 0 to %d are used.\n",
NUM_INTERRUPT_TYPES);
else
DebuggerInterruptMasks[i] = 0;
}
else if (1 == sscanf (s, "MASKOFF%d", &i))
{
if (i < 0 || i > NUM_INTERRUPT_TYPES)
printf ("Only interrupt types 0 to %d are used.\n",
NUM_INTERRUPT_TYPES);
else
DebuggerInterruptMasks[i] = 1;
}
else if (!strcmp (s, "BACKTRACES"))
BacktraceDisplay (Debugger.State, MAX_BACKTRACE_POINTS);
else if (1 == sscanf (s, "BACKTRACE%d", &i))
{
int j;
if (0 != (j = BacktraceRestore (Debugger.State, i)))
printf ("Error %d restoring backtrace point #%d.\n", j, i);
else
{
printf ("Backtrace point #%d restored.\n", i);
for (j = 0; j < NumBreakpoints; j++)
if (Breakpoints[j].WatchBreak == 1
|| Breakpoints[j].WatchBreak == 4)
Breakpoints[j].WatchValue = DbgGetWatch (Debugger.State,
&Breakpoints[j]);
}
Debugger.State->PendFlag = SingleStepCounter = 0;
Break = 1;
SimSetCycleCount (SIM_CYCLECOUNT_AGC);
return (1);
}
else
{
GdbmiResult result = GdbmiInterpreter (Debugger.State, s, sraw);
switch (result)
{
// case gdbmiCmdUnhandled:
// break;
// case gdbmiCmdError:
// break;
// case gdbmiCmdDone:
// fflush(stdout);
// break;
//// case gdbmiCmdNext:
//// case gdbmiCmdStep:
//// Debugger.RunState = 1;
//// SingleStepCounter = 0;
//// break;
// case gdbmiCmdContinue:
case GdbmiCmdRun:
Debugger.RunState = 1;
break;
case GdbmiCmdQuit:
// return(0);
exit (0);
default:
fflush (stdout);
break;
}
if (result == GdbmiCmdRun)
break;
// if ( result < gdbmiCmdDone )
// {
// printf ("Undefined command: \"%s\". Try \"help\".\n", sraw );
// }
// else
// {
//
//
// fflush(stdout);
// }
}
}
DbgProcessLog ();
}
return (0);
}
Computing file changes ...
