https://github.com/torvalds/linux
Revision 68752b24f51a71d4f350a764d890b670f59062c5 authored by Yunsheng Lin on 19 October 2021, 14:16:33 UTC, committed by David S. Miller on 20 October 2021, 10:38:11 UTC
Currently when there is a rx page allocation failure, it is
possible that polling may be stopped if there is no more packet
to be reveiced, which may cause queue stall problem under memory
pressure.

This patch makes sure polling is scheduled again when there is
any rx page allocation failure, and polling will try to allocate
receive buffers until it succeeds.

Now the allocation retry is added, it is unnecessary to do the rx
page allocation at the end of rx cleaning, so remove it. And reset
the unused_count to zero after calling hns3_nic_alloc_rx_buffers()
to avoid calling hns3_nic_alloc_rx_buffers() repeatedly under
memory pressure.

Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent 9f9f0f1
Raw File
Tip revision: 68752b24f51a71d4f350a764d890b670f59062c5 authored by Yunsheng Lin on 19 October 2021, 14:16:33 UTC
net: hns3: schedule the polling again when allocation fails
Tip revision: 68752b2
linear_ranges.c
// SPDX-License-Identifier: GPL-2.0
/*
 * helpers to map values in a linear range to range index
 *
 * Original idea borrowed from regulator framework
 *
 * It might be useful if we could support also inversely proportional ranges?
 * Copyright 2020 ROHM Semiconductors
 */

#include <linux/errno.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/linear_range.h>
#include <linux/module.h>

/**
 * linear_range_values_in_range - return the amount of values in a range
 * @r:		pointer to linear range where values are counted
 *
 * Compute the amount of values in range pointed by @r. Note, values can
 * be all equal - range with selectors 0,...,2 with step 0 still contains
 * 3 values even though they are all equal.
 *
 * Return: the amount of values in range pointed by @r
 */
unsigned int linear_range_values_in_range(const struct linear_range *r)
{
	if (!r)
		return 0;
	return r->max_sel - r->min_sel + 1;
}
EXPORT_SYMBOL_GPL(linear_range_values_in_range);

/**
 * linear_range_values_in_range_array - return the amount of values in ranges
 * @r:		pointer to array of linear ranges where values are counted
 * @ranges:	amount of ranges we include in computation.
 *
 * Compute the amount of values in ranges pointed by @r. Note, values can
 * be all equal - range with selectors 0,...,2 with step 0 still contains
 * 3 values even though they are all equal.
 *
 * Return: the amount of values in first @ranges ranges pointed by @r
 */
unsigned int linear_range_values_in_range_array(const struct linear_range *r,
						int ranges)
{
	int i, values_in_range = 0;

	for (i = 0; i < ranges; i++) {
		int values;

		values = linear_range_values_in_range(&r[i]);
		if (!values)
			return values;

		values_in_range += values;
	}
	return values_in_range;
}
EXPORT_SYMBOL_GPL(linear_range_values_in_range_array);

/**
 * linear_range_get_max_value - return the largest value in a range
 * @r:		pointer to linear range where value is looked from
 *
 * Return: the largest value in the given range
 */
unsigned int linear_range_get_max_value(const struct linear_range *r)
{
	return r->min + (r->max_sel - r->min_sel) * r->step;
}
EXPORT_SYMBOL_GPL(linear_range_get_max_value);

/**
 * linear_range_get_value - fetch a value from given range
 * @r:		pointer to linear range where value is looked from
 * @selector:	selector for which the value is searched
 * @val:	address where found value is updated
 *
 * Search given ranges for value which matches given selector.
 *
 * Return: 0 on success, -EINVAL given selector is not found from any of the
 * ranges.
 */
int linear_range_get_value(const struct linear_range *r, unsigned int selector,
			   unsigned int *val)
{
	if (r->min_sel > selector || r->max_sel < selector)
		return -EINVAL;

	*val = r->min + (selector - r->min_sel) * r->step;

	return 0;
}
EXPORT_SYMBOL_GPL(linear_range_get_value);

/**
 * linear_range_get_value_array - fetch a value from array of ranges
 * @r:		pointer to array of linear ranges where value is looked from
 * @ranges:	amount of ranges in an array
 * @selector:	selector for which the value is searched
 * @val:	address where found value is updated
 *
 * Search through an array of ranges for value which matches given selector.
 *
 * Return: 0 on success, -EINVAL given selector is not found from any of the
 * ranges.
 */
int linear_range_get_value_array(const struct linear_range *r, int ranges,
				 unsigned int selector, unsigned int *val)
{
	int i;

	for (i = 0; i < ranges; i++)
		if (r[i].min_sel <= selector && r[i].max_sel >= selector)
			return linear_range_get_value(&r[i], selector, val);

	return -EINVAL;
}
EXPORT_SYMBOL_GPL(linear_range_get_value_array);

/**
 * linear_range_get_selector_low - return linear range selector for value
 * @r:		pointer to linear range where selector is looked from
 * @val:	value for which the selector is searched
 * @selector:	address where found selector value is updated
 * @found:	flag to indicate that given value was in the range
 *
 * Return selector for which range value is closest match for given
 * input value. Value is matching if it is equal or smaller than given
 * value. If given value is in the range, then @found is set true.
 *
 * Return: 0 on success, -EINVAL if range is invalid or does not contain
 * value smaller or equal to given value
 */
int linear_range_get_selector_low(const struct linear_range *r,
				  unsigned int val, unsigned int *selector,
				  bool *found)
{
	*found = false;

	if (r->min > val)
		return -EINVAL;

	if (linear_range_get_max_value(r) < val) {
		*selector = r->max_sel;
		return 0;
	}

	*found = true;

	if (r->step == 0)
		*selector = r->min_sel;
	else
		*selector = (val - r->min) / r->step + r->min_sel;

	return 0;
}
EXPORT_SYMBOL_GPL(linear_range_get_selector_low);

/**
 * linear_range_get_selector_low_array - return linear range selector for value
 * @r:		pointer to array of linear ranges where selector is looked from
 * @ranges:	amount of ranges to scan from array
 * @val:	value for which the selector is searched
 * @selector:	address where found selector value is updated
 * @found:	flag to indicate that given value was in the range
 *
 * Scan array of ranges for selector for which range value matches given
 * input value. Value is matching if it is equal or smaller than given
 * value. If given value is found to be in a range scanning is stopped and
 * @found is set true. If a range with values smaller than given value is found
 * but the range max is being smaller than given value, then the range's
 * biggest selector is updated to @selector but scanning ranges is continued
 * and @found is set to false.
 *
 * Return: 0 on success, -EINVAL if range array is invalid or does not contain
 * range with a value smaller or equal to given value
 */
int linear_range_get_selector_low_array(const struct linear_range *r,
					int ranges, unsigned int val,
					unsigned int *selector, bool *found)
{
	int i;
	int ret = -EINVAL;

	for (i = 0; i < ranges; i++) {
		int tmpret;

		tmpret = linear_range_get_selector_low(&r[i], val, selector,
						       found);
		if (!tmpret)
			ret = 0;

		if (*found)
			break;
	}

	return ret;
}
EXPORT_SYMBOL_GPL(linear_range_get_selector_low_array);

/**
 * linear_range_get_selector_high - return linear range selector for value
 * @r:		pointer to linear range where selector is looked from
 * @val:	value for which the selector is searched
 * @selector:	address where found selector value is updated
 * @found:	flag to indicate that given value was in the range
 *
 * Return selector for which range value is closest match for given
 * input value. Value is matching if it is equal or higher than given
 * value. If given value is in the range, then @found is set true.
 *
 * Return: 0 on success, -EINVAL if range is invalid or does not contain
 * value greater or equal to given value
 */
int linear_range_get_selector_high(const struct linear_range *r,
				   unsigned int val, unsigned int *selector,
				   bool *found)
{
	*found = false;

	if (linear_range_get_max_value(r) < val)
		return -EINVAL;

	if (r->min > val) {
		*selector = r->min_sel;
		return 0;
	}

	*found = true;

	if (r->step == 0)
		*selector = r->max_sel;
	else
		*selector = DIV_ROUND_UP(val - r->min, r->step) + r->min_sel;

	return 0;
}
EXPORT_SYMBOL_GPL(linear_range_get_selector_high);

/**
 * linear_range_get_selector_within - return linear range selector for value
 * @r:		pointer to linear range where selector is looked from
 * @val:	value for which the selector is searched
 * @selector:	address where found selector value is updated
 *
 * Return selector for which range value is closest match for given
 * input value. Value is matching if it is equal or lower than given
 * value. But return maximum selector if given value is higher than
 * maximum value.
 */
void linear_range_get_selector_within(const struct linear_range *r,
				      unsigned int val, unsigned int *selector)
{
	if (r->min > val) {
		*selector = r->min_sel;
		return;
	}

	if (linear_range_get_max_value(r) < val) {
		*selector = r->max_sel;
		return;
	}

	if (r->step == 0)
		*selector = r->min_sel;
	else
		*selector = (val - r->min) / r->step + r->min_sel;
}
EXPORT_SYMBOL_GPL(linear_range_get_selector_within);

MODULE_DESCRIPTION("linear-ranges helper");
MODULE_LICENSE("GPL");
back to top