Revision 9f28ffc03e93343ac04874fda9edb7affea45165 authored by David S. Miller on 19 December 2012, 23:19:11 UTC, committed by David S. Miller on 19 December 2012, 23:19:11 UTC
The basic scheme of the block mode assembler is that we start by enabling the FPU, loading the key into the floating point registers, then iterate calling the encrypt/decrypt routine for each block. For the 256-bit key cases, we run short on registers in the unrolled loops. So the {ENCRYPT,DECRYPT}_256_2() macros reload the key registers that get clobbered. The unrolled macros, {ENCRYPT,DECRYPT}_256(), are not mindful of this. So if we have a mix of multi-block and single-block calls, the single-block unrolled 256-bit encrypt/decrypt can run with some of the key registers clobbered. Handle this by always explicitly loading those registers before using the non-unrolled 256-bit macro. This was discovered thanks to all of the new test cases added by Jussi Kivilinna. Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent 4a9d194
ep93xx_wdt.c
/*
* Watchdog driver for Cirrus Logic EP93xx family of devices.
*
* Copyright (c) 2004 Ray Lehtiniemi
* Copyright (c) 2006 Tower Technologies
* Based on ep93xx driver, bits from alim7101_wdt.c
*
* Authors: Ray Lehtiniemi <rayl@mail.com>,
* Alessandro Zummo <a.zummo@towertech.it>
*
* Copyright (c) 2012 H Hartley Sweeten <hsweeten@visionengravers.com>
* Convert to a platform device and use the watchdog framework API
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
* This watchdog fires after 250msec, which is a too short interval
* for us to rely on the user space daemon alone. So we ping the
* wdt each ~200msec and eventually stop doing it if the user space
* daemon dies.
*
* TODO:
*
* - Test last reset from watchdog status
* - Add a few missing ioctls
*/
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/timer.h>
#include <linux/io.h>
#define WDT_VERSION "0.4"
/* default timeout (secs) */
#define WDT_TIMEOUT 30
static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
static unsigned int timeout = WDT_TIMEOUT;
module_param(timeout, uint, 0);
MODULE_PARM_DESC(timeout,
"Watchdog timeout in seconds. (1<=timeout<=3600, default="
__MODULE_STRING(WDT_TIMEOUT) ")");
static void __iomem *mmio_base;
static struct timer_list timer;
static unsigned long next_heartbeat;
#define EP93XX_WATCHDOG 0x00
#define EP93XX_WDSTATUS 0x04
/* reset the wdt every ~200ms - the heartbeat of the device is 0.250 seconds*/
#define WDT_INTERVAL (HZ/5)
static void ep93xx_wdt_timer_ping(unsigned long data)
{
if (time_before(jiffies, next_heartbeat))
writel(0x5555, mmio_base + EP93XX_WATCHDOG);
/* Re-set the timer interval */
mod_timer(&timer, jiffies + WDT_INTERVAL);
}
static int ep93xx_wdt_start(struct watchdog_device *wdd)
{
next_heartbeat = jiffies + (timeout * HZ);
writel(0xaaaa, mmio_base + EP93XX_WATCHDOG);
mod_timer(&timer, jiffies + WDT_INTERVAL);
return 0;
}
static int ep93xx_wdt_stop(struct watchdog_device *wdd)
{
del_timer_sync(&timer);
writel(0xaa55, mmio_base + EP93XX_WATCHDOG);
return 0;
}
static int ep93xx_wdt_keepalive(struct watchdog_device *wdd)
{
/* user land ping */
next_heartbeat = jiffies + (timeout * HZ);
return 0;
}
static const struct watchdog_info ep93xx_wdt_ident = {
.options = WDIOF_CARDRESET |
WDIOF_MAGICCLOSE |
WDIOF_KEEPALIVEPING,
.identity = "EP93xx Watchdog",
};
static struct watchdog_ops ep93xx_wdt_ops = {
.owner = THIS_MODULE,
.start = ep93xx_wdt_start,
.stop = ep93xx_wdt_stop,
.ping = ep93xx_wdt_keepalive,
};
static struct watchdog_device ep93xx_wdt_wdd = {
.info = &ep93xx_wdt_ident,
.ops = &ep93xx_wdt_ops,
};
static int ep93xx_wdt_probe(struct platform_device *pdev)
{
struct resource *res;
unsigned long val;
int err;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENXIO;
if (!devm_request_mem_region(&pdev->dev, res->start,
resource_size(res), pdev->name))
return -EBUSY;
mmio_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
if (!mmio_base)
return -ENXIO;
if (timeout < 1 || timeout > 3600) {
timeout = WDT_TIMEOUT;
dev_warn(&pdev->dev,
"timeout value must be 1<=x<=3600, using %d\n",
timeout);
}
val = readl(mmio_base + EP93XX_WATCHDOG);
ep93xx_wdt_wdd.bootstatus = (val & 0x01) ? WDIOF_CARDRESET : 0;
ep93xx_wdt_wdd.timeout = timeout;
watchdog_set_nowayout(&ep93xx_wdt_wdd, nowayout);
setup_timer(&timer, ep93xx_wdt_timer_ping, 1);
err = watchdog_register_device(&ep93xx_wdt_wdd);
if (err)
return err;
dev_info(&pdev->dev,
"EP93XX watchdog, driver version " WDT_VERSION "%s\n",
(val & 0x08) ? " (nCS1 disable detected)" : "");
return 0;
}
static int ep93xx_wdt_remove(struct platform_device *pdev)
{
watchdog_unregister_device(&ep93xx_wdt_wdd);
return 0;
}
static struct platform_driver ep93xx_wdt_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "ep93xx-wdt",
},
.probe = ep93xx_wdt_probe,
.remove = ep93xx_wdt_remove,
};
module_platform_driver(ep93xx_wdt_driver);
MODULE_AUTHOR("Ray Lehtiniemi <rayl@mail.com>,"
"Alessandro Zummo <a.zummo@towertech.it>,"
"H Hartley Sweeten <hsweeten@visionengravers.com>");
MODULE_DESCRIPTION("EP93xx Watchdog");
MODULE_LICENSE("GPL");
MODULE_VERSION(WDT_VERSION);
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...