Revision d57019d1858a6f9b3ca05d76d793466ae428cfa3 authored by Sergei Shtylyov on 22 March 2016, 21:44:40 UTC, committed by David S. Miller on 23 March 2016, 17:38:40 UTC
The driver of course "knows" that the chip's reset signal is active low,
so  it drives the GPIO to 0  to reset the PHY and to 1 otherwise; however
all this will only work iff the GPIO  is  specified as active-high in the
device tree!  I think both the driver and the device trees (if there are
any -- I was unable to find them) need to be fixed in this case...

Fixes: 13a56b449325 ("net: phy: at803x: Add support for hardware reset")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent 9a34921
History
File Mode Size
9p
adfs
affs
afs
autofs4
befs
bfs
btrfs
cachefiles
ceph
cifs
coda
configfs
cramfs
debugfs
devpts
dlm
ecryptfs
efivarfs
efs
exofs
exportfs
ext2
ext4
f2fs
fat
freevxfs
fscache
fuse
gfs2
hfs
hfsplus
hostfs
hpfs
hugetlbfs
isofs
jbd2
jffs2
jfs
kernfs
lockd
logfs
minix
ncpfs
nfs
nfs_common
nfsd
nilfs2
nls
notify
ntfs
ocfs2
omfs
openpromfs
overlayfs
proc
pstore
qnx4
qnx6
quota
ramfs
reiserfs
romfs
squashfs
sysfs
sysv
tracefs
ubifs
udf
ufs
xfs
Kconfig -rw-r--r-- 6.9 KB
Kconfig.binfmt -rw-r--r-- 7.0 KB
Makefile -rw-r--r-- 4.1 KB
aio.c -rw-r--r-- 43.0 KB
anon_inodes.c -rw-r--r-- 4.9 KB
attr.c -rw-r--r-- 7.9 KB
bad_inode.c -rw-r--r-- 4.7 KB
binfmt_aout.c -rw-r--r-- 10.8 KB
binfmt_elf.c -rw-r--r-- 60.7 KB
binfmt_elf_fdpic.c -rw-r--r-- 47.8 KB
binfmt_em86.c -rw-r--r-- 2.8 KB
binfmt_flat.c -rw-r--r-- 26.4 KB
binfmt_misc.c -rw-r--r-- 17.4 KB
binfmt_script.c -rw-r--r-- 3.0 KB
block_dev.c -rw-r--r-- 48.6 KB
buffer.c -rw-r--r-- 88.6 KB
char_dev.c -rw-r--r-- 13.3 KB
compat.c -rw-r--r-- 37.1 KB
compat_binfmt_elf.c -rw-r--r-- 3.7 KB
compat_ioctl.c -rw-r--r-- 45.3 KB
coredump.c -rw-r--r-- 19.9 KB
dax.c -rw-r--r-- 31.9 KB
dcache.c -rw-r--r-- 89.1 KB
dcookies.c -rw-r--r-- 6.9 KB
direct-io.c -rw-r--r-- 38.3 KB
drop_caches.c -rw-r--r-- 1.6 KB
eventfd.c -rw-r--r-- 11.2 KB
eventpoll.c -rw-r--r-- 60.1 KB
exec.c -rw-r--r-- 42.4 KB
fcntl.c -rw-r--r-- 16.7 KB
fhandle.c -rw-r--r-- 6.5 KB
file.c -rw-r--r-- 23.5 KB
file_table.c -rw-r--r-- 8.5 KB
filesystems.c -rw-r--r-- 6.4 KB
fs-writeback.c -rw-r--r-- 68.4 KB
fs_pin.c -rw-r--r-- 2.0 KB
fs_struct.c -rw-r--r-- 3.3 KB
inode.c -rw-r--r-- 53.1 KB
internal.h -rw-r--r-- 3.8 KB
ioctl.c -rw-r--r-- 17.1 KB
libfs.c -rw-r--r-- 30.3 KB
locks.c -rw-r--r-- 71.5 KB
mbcache.c -rw-r--r-- 11.9 KB
mount.h -rw-r--r-- 3.5 KB
mpage.c -rw-r--r-- 20.3 KB
namei.c -rw-r--r-- 115.9 KB
namespace.c -rw-r--r-- 81.6 KB
no-block.c -rw-r--r-- 688 bytes
nsfs.c -rw-r--r-- 3.7 KB
open.c -rw-r--r-- 26.8 KB
pipe.c -rw-r--r-- 26.3 KB
pnode.c -rw-r--r-- 11.3 KB
pnode.h -rw-r--r-- 1.8 KB
posix_acl.c -rw-r--r-- 19.6 KB
proc_namespace.c -rw-r--r-- 7.7 KB
read_write.c -rw-r--r-- 36.4 KB
readdir.c -rw-r--r-- 6.9 KB
select.c -rw-r--r-- 25.3 KB
seq_file.c -rw-r--r-- 22.4 KB
signalfd.c -rw-r--r-- 9.2 KB
splice.c -rw-r--r-- 46.2 KB
stack.c -rw-r--r-- 2.5 KB
stat.c -rw-r--r-- 11.9 KB
statfs.c -rw-r--r-- 5.3 KB
super.c -rw-r--r-- 35.0 KB
sync.c -rw-r--r-- 9.9 KB
timerfd.c -rw-r--r-- 13.0 KB
userfaultfd.c -rw-r--r-- 35.1 KB
utimes.c -rw-r--r-- 5.9 KB
xattr.c -rw-r--r-- 23.2 KB

back to top