swh:1:snp:13806c77fd4b7f42b1e985e730bd615fd52cfac1
- v5.9-rc8
- v5.9-rc7
- v5.9-rc6
- v5.9-rc5
- v5.9-rc4
- v5.9-rc3
- v5.9-rc2
- v5.9-rc1
- v5.9
- v5.8-rc7
- v5.8-rc6
- v5.8-rc5
- v5.8-rc4
- v5.8-rc3
- v5.8-rc2
- v5.8-rc1
- v5.8
- v5.7-rc7
- v5.7-rc6
- v5.7-rc5
- v5.7-rc4
- v5.7-rc3
- v5.7-rc2
- v5.7-rc1
- v5.7
- v5.6-rc7
- v5.6-rc6
- v5.6-rc5
- v5.6-rc4
- v5.6-rc3
- v5.6-rc2
- v5.6-rc1
- v5.6
- v5.5-rc7
- v5.5-rc6
- v5.5-rc5
- v5.5-rc4
- v5.5-rc3
- v5.5-rc2
- v5.5-rc1
- v5.5
- v5.4-rc8
- v5.4-rc7
- v5.4-rc6
- v5.4-rc5
- v5.4-rc4
- v5.4-rc3
- v5.4-rc2
- v5.4-rc1
- v5.4
- v5.3-rc8
- v5.3-rc7
- v5.3-rc6
- v5.3-rc5
- v5.3-rc4
- v5.3-rc3
- v5.3-rc2
- v5.3-rc1
- v5.3
- v5.2-rc7
- v5.2-rc6
- v5.2-rc5
- v5.2-rc4
- v5.2-rc3
- v5.2-rc2
- v5.2-rc1
- v5.2
- v5.12-rc6
- v5.12-rc5
- v5.12-rc4
- v5.12-rc3
- v5.12-rc2
- v5.12-rc1
- v5.11-rc7
- v5.11-rc6
- v5.11-rc5
- v5.11-rc4
- v5.11-rc3
- v5.11-rc2
- v5.11-rc1
- v5.11
- v5.10-rc7
- v5.10-rc6
- v5.10-rc5
- v5.10-rc4
- v5.10-rc3
- v5.10-rc2
- v5.10-rc1
- v5.10
- v5.1-rc7
- v5.1-rc6
- v5.1-rc5
- v5.1-rc4
- v5.1-rc3
- v5.1-rc2
- v5.1-rc1
- v5.1
- v5.0-rc8
- v5.0-rc7
- v5.0-rc6
- v5.0-rc5
- v5.0-rc4
- v5.0-rc3
- v5.0-rc2
- v5.0-rc1
- v5.0
- v4.9-rc8
- v4.9-rc7
- v4.9-rc6
- v4.9-rc5
- v4.9-rc4
- v4.9-rc3
- v4.9-rc2
- v4.9-rc1
- v4.9
- v4.8-rc8
- v4.8-rc7
- v4.8-rc6
- v4.8-rc5
- v4.8-rc4
- v4.8-rc3
- v4.8-rc2
- v4.8-rc1
- v4.8
- v4.7-rc7
- v4.7-rc6
- v4.7-rc5
- v4.7-rc4
- v4.7-rc3
- v4.7-rc2
- v4.7-rc1
- v4.7
- v4.6-rc7
- v4.6-rc6
- v4.6-rc5
- v4.6-rc4
- v4.6-rc3
- v4.6-rc2
- v4.6-rc1
- v4.6
- v4.5-rc7
- v4.5-rc6
- v4.5-rc5
- v4.5-rc4
- v4.5-rc3
- v4.5-rc2
- v4.5-rc1
- v4.5
- v4.4-rc8
- v4.4-rc7
- v4.4-rc6
- v4.4-rc5
- v4.4-rc4
- v4.4-rc3
- v4.4-rc2
- v4.4-rc1
- v4.4
- v4.3-rc7
- v4.3-rc6
- v4.3-rc5
- v4.3-rc4
- v4.3-rc3
- v4.3-rc2
- v4.3-rc1
- v4.3
- v4.20-rc7
- v4.20-rc6
- v4.20-rc5
- v4.20-rc4
- v4.20-rc3
- v4.20-rc2
- v4.20-rc1
- v4.20
- v4.2-rc8
- v4.2-rc7
- v4.2-rc6
- v4.2-rc5
- v4.2-rc4
- v4.2-rc3
- v4.2-rc2
- v4.2-rc1
- v4.2
- v4.19-rc8
- v4.19-rc7
- v4.19-rc6
- v4.19-rc5
- v4.19-rc4
- v4.19-rc3
- v4.19-rc2
- v4.19-rc1
- v4.19
- v4.18-rc8
- v4.18-rc7
- v4.18-rc6
- v4.18-rc5
- v4.18-rc4
- v4.18-rc3
- v4.18-rc2
- v4.18-rc1
- v4.18
- v4.17-rc7
- v4.17-rc6
- v4.17-rc5
- v4.17-rc4
- v4.17-rc3
- v4.17-rc2
- v4.17-rc1
- v4.17
- v4.16-rc7
- v4.16-rc6
- v4.16-rc5
- v4.16-rc4
- v4.16-rc3
- v4.16-rc2
- v4.16-rc1
- v4.16
- v4.15-rc9
- v4.15-rc8
- v4.15-rc7
- v4.15-rc6
- v4.15-rc5
- v4.15-rc4
- v4.15-rc3
- v4.15-rc2
- v4.15-rc1
- v4.15
- v4.14-rc8
- v4.14-rc7
- v4.14-rc6
- v4.14-rc5
- v4.14-rc4
- v4.14-rc3
- v4.14-rc2
- v4.14-rc1
- v4.14
- v4.13-rc7
- v4.13-rc6
- v4.13-rc5
- v4.13-rc4
- v4.13-rc3
- v4.13-rc2
- v4.13-rc1
- v4.13
- v4.12-rc7
- v4.12-rc6
- v4.12-rc5
- v4.12-rc4
- v4.12-rc3
- v4.12-rc2
- v4.12-rc1
- v4.12
- v4.11-rc8
- v4.11-rc7
- v4.11-rc6
- v4.11-rc5
- v4.11-rc4
- v4.11-rc3
- v4.11-rc2
- v4.11-rc1
- v4.11
- v4.10-rc8
- v4.10-rc7
- v4.10-rc6
- v4.10-rc5
- v4.10-rc4
- v4.10-rc3
- v4.10-rc2
- v4.10-rc1
- v4.10
- v4.1-rc8
- v4.1-rc7
- v4.1-rc6
- v4.1-rc5
- v4.1-rc4
- v4.1-rc3
- v4.1-rc2
- v4.1-rc1
- v4.1
- v4.0-rc7
- v4.0-rc6
- v4.0-rc5
- v4.0-rc4
- v4.0-rc3
- v4.0-rc2
- v4.0-rc1
- v4.0
- v3.9-rc8
- v3.9-rc7
- v3.9-rc6
- v3.9-rc5
- v3.9-rc4
- v3.9-rc3
- v3.9-rc2
- v3.9-rc1
- v3.9
- v3.8-rc7
- v3.8-rc6
- v3.8-rc5
- v3.8-rc4
- v3.8-rc3
- v3.8-rc2
- v3.8-rc1
- v3.8
- v3.7-rc8
- v3.7-rc7
- v3.7-rc6
- v3.7-rc5
- v3.7-rc4
- v3.7-rc3
- v3.7-rc2
- v3.7-rc1
- v3.7
- v3.6-rc7
- v3.6-rc6
- v3.6-rc5
- v3.6-rc4
- v3.6-rc3
- v3.6-rc2
- v3.6-rc1
- v3.6
- v3.5-rc7
- v3.5-rc6
- v3.5-rc5
- v3.5-rc4
- v3.5-rc3
- v3.5-rc2
- v3.5-rc1
- v3.5
- v3.4-rc7
- v3.4-rc6
- v3.4-rc5
- v3.4-rc4
- v3.4-rc3
- v3.4-rc2
- v3.4-rc1
- v3.4
- v3.3-rc7
- v3.3-rc6
- v3.3-rc5
- v3.3-rc4
- v3.3-rc3
- v3.3-rc2
- v3.3-rc1
- v3.3
- v3.2-rc7
- v3.2-rc6
- v3.2-rc5
- v3.2-rc4
- v3.2-rc3
- v3.2-rc2
- v3.2-rc1
- v3.2
- v3.19-rc7
- v3.19-rc6
- v3.19-rc5
- v3.19-rc4
- v3.19-rc3
- v3.19-rc2
- v3.19-rc1
- v3.19
- v3.18-rc7
- v3.18-rc6
- v3.18-rc5
- v3.18-rc4
- v3.18-rc3
- v3.18-rc2
- v3.18-rc1
- v3.18
- v3.17-rc7
- v3.17-rc6
- v3.17-rc5
- v3.17-rc4
- v3.17-rc3
- v3.17-rc2
- v3.17-rc1
- v3.17
- v3.16-rc7
- v3.16-rc6
- v3.16-rc5
- v3.16-rc4
- v3.16-rc3
- v3.16-rc2
- v3.16-rc1
- v3.16
- v3.15-rc8
- v3.15-rc7
- v3.15-rc6
- v3.15-rc5
- v3.15-rc4
- v3.15-rc3
- v3.15-rc2
- v3.15-rc1
- v3.15
- v3.14-rc8
- v3.14-rc7
- v3.14-rc6
- v3.14-rc5
- v3.14-rc4
- v3.14-rc3
- v3.14-rc2
- v3.14-rc1
- v3.14
- v3.13-rc8
- v3.13-rc7
- v3.13-rc6
- v3.13-rc5
- v3.13-rc4
- v3.13-rc3
- v3.13-rc2
- v3.13-rc1
- v3.13
- v3.12-rc7
- v3.12-rc6
- v3.12-rc5
- v3.12-rc4
- v3.12-rc3
- v3.12-rc2
- v3.12-rc1
- v3.12
- v3.11-rc7
- v3.11-rc6
- v3.11-rc5
- v3.11-rc4
- v3.11-rc3
- v3.11-rc2
- v3.11-rc1
- v3.11
- v3.10-rc7
- v3.10-rc6
- v3.10-rc5
- v3.10-rc4
- v3.10-rc3
- v3.10-rc2
- v3.10-rc1
- v3.10
- v3.1-rc9
- v3.1-rc8
- v3.1-rc7
- v3.1-rc6
- v3.1-rc5
- v3.1-rc4
- v3.1-rc3
- v3.1-rc2
- v3.1-rc10
- v3.1-rc1
- v3.1
- v3.0-rc7
- v3.0-rc6
- v3.0-rc5
- v3.0-rc4
- v3.0-rc3
- v3.0-rc2
- v3.0-rc1
- v3.0
- v2.6.39-rc7
- v2.6.39-rc6
- v2.6.39-rc5
- v2.6.39-rc4
- v2.6.39-rc3
- v2.6.39-rc2
- v2.6.39-rc1
- v2.6.39
- v2.6.38-rc8
- v2.6.38-rc7
- v2.6.38-rc6
- v2.6.38-rc5
- v2.6.38-rc4
- v2.6.38-rc3
- v2.6.38-rc2
- v2.6.38-rc1
- v2.6.38
- v2.6.37-rc8
- v2.6.37-rc7
- v2.6.37-rc6
- v2.6.37-rc5
- v2.6.37-rc4
- v2.6.37-rc3
- v2.6.37-rc2
- v2.6.37-rc1
- v2.6.37
- v2.6.36-rc8
- v2.6.36-rc7
- v2.6.36-rc6
- v2.6.36-rc5
- v2.6.36-rc4
- v2.6.36-rc3
- v2.6.36-rc2
- v2.6.36-rc1
- v2.6.36
- v2.6.35-rc6
- v2.6.35-rc5
- v2.6.35-rc4
- v2.6.35-rc3
- v2.6.35-rc2
- v2.6.35-rc1
- v2.6.35
- v2.6.34-rc7
- v2.6.34-rc6
- v2.6.34-rc5
- v2.6.34-rc4
- v2.6.34-rc3
- v2.6.34-rc2
- v2.6.34-rc1
- v2.6.34
- v2.6.33-rc8
- v2.6.33-rc7
- v2.6.33-rc6
- v2.6.33-rc5
- v2.6.33-rc4
- v2.6.33-rc3
- v2.6.33-rc2
- v2.6.33-rc1
- v2.6.33
- v2.6.32-rc8
- v2.6.32-rc7
- v2.6.32-rc6
- v2.6.32-rc5
- v2.6.32-rc4
- v2.6.32-rc3
- v2.6.32-rc1
- v2.6.32
- v2.6.31-rc9
- v2.6.31-rc8
- v2.6.31-rc7
- v2.6.31-rc6
- v2.6.31-rc5
- v2.6.31-rc4
- v2.6.31-rc3
- v2.6.31-rc2
- v2.6.31-rc1
- v2.6.31
- v2.6.30-rc8
- v2.6.30-rc7
- v2.6.30-rc6
- v2.6.30-rc5
- v2.6.30-rc4
- v2.6.30-rc3
- v2.6.30-rc2
- v2.6.30-rc1
- v2.6.30
- v2.6.29-rc8
- v2.6.29-rc7
- v2.6.29-rc6
- v2.6.29-rc5
- v2.6.29-rc4
- v2.6.29-rc3
- v2.6.29-rc2
- v2.6.29-rc1
- v2.6.29
- v2.6.28-rc9
- v2.6.28-rc8
- v2.6.28-rc7
- v2.6.28-rc6
- v2.6.28-rc5
- v2.6.28-rc4
- v2.6.28-rc3
- v2.6.28-rc2
- v2.6.28-rc1
- v2.6.28
- v2.6.27-rc9
- v2.6.27-rc8
- v2.6.27-rc7
- v2.6.27-rc6
- v2.6.27-rc5
- v2.6.27-rc4
- v2.6.27-rc3
- v2.6.27-rc2
- v2.6.27-rc1
- v2.6.27
- v2.6.26-rc9
- v2.6.26-rc8
- v2.6.26-rc7
- v2.6.26-rc6
- v2.6.26-rc5
- v2.6.26-rc4
- v2.6.26-rc3
- v2.6.26-rc2
- v2.6.26-rc1
- v2.6.26
- v2.6.25-rc9
- v2.6.25-rc8
- v2.6.25-rc7
- v2.6.25-rc6
- v2.6.25-rc5
- v2.6.25-rc4
- v2.6.25-rc3
- v2.6.25-rc2
- v2.6.25-rc1
- v2.6.25
- v2.6.24-rc8
- v2.6.24-rc7
- v2.6.24-rc6
- v2.6.24-rc5
- v2.6.24-rc4
- v2.6.24-rc3
- v2.6.24-rc2
- v2.6.24-rc1
- v2.6.24
- v2.6.23-rc9
- v2.6.23-rc8
- v2.6.23-rc7
- v2.6.23-rc6
- v2.6.23-rc5
- v2.6.23-rc4
- v2.6.23-rc3
- v2.6.23-rc2
- v2.6.23-rc1
- v2.6.23
- v2.6.22-rc7
- v2.6.22-rc6
- v2.6.22-rc5
- v2.6.22-rc4
- v2.6.22-rc3
- v2.6.22-rc2
- v2.6.22-rc1
- v2.6.22
- v2.6.21-rc7
- v2.6.21-rc6
- v2.6.21-rc5
- v2.6.21-rc4
- v2.6.21-rc3
- v2.6.21-rc2
- v2.6.21-rc1
- v2.6.21
- v2.6.20-rc7
- v2.6.20-rc6
- v2.6.20-rc5
- v2.6.20-rc4
- v2.6.20-rc3
- v2.6.20-rc2
- v2.6.20-rc1
- v2.6.20
- v2.6.19-rc6
- v2.6.19-rc5
- v2.6.19-rc4
- v2.6.19-rc3
- v2.6.19-rc2
- v2.6.19-rc1
- v2.6.19
- v2.6.18-rc7
- v2.6.18-rc6
- v2.6.18-rc5
- v2.6.18-rc4
- v2.6.18-rc3
- v2.6.18-rc2
- v2.6.18-rc1
- v2.6.18
- v2.6.17-rc6
- v2.6.17-rc5
- v2.6.17-rc4
- v2.6.17-rc3
- v2.6.17-rc2
- v2.6.17-rc1
- v2.6.17
- v2.6.16-rc6
- v2.6.16-rc5
- v2.6.16-rc4
- v2.6.16-rc3
- v2.6.16-rc2
- v2.6.16-rc1
- v2.6.16
- v2.6.15-rc7
- v2.6.15-rc6
- v2.6.15-rc5
- v2.6.15-rc4
- v2.6.15-rc3
- v2.6.15-rc2
- v2.6.15-rc1
- v2.6.15
- v2.6.14-rc5
- v2.6.14-rc4
- v2.6.14-rc3
- v2.6.14-rc2
- v2.6.14-rc1
- v2.6.14
- v2.6.13-rc7
- v2.6.13-rc6
- v2.6.13-rc5
- v2.6.13-rc4
- v2.6.13-rc3
- v2.6.13-rc2
- v2.6.13-rc1
- v2.6.13
- v2.6.12-rc6
- v2.6.12-rc5
- v2.6.12-rc4
- v2.6.12-rc3
- v2.6.12-rc2
- v2.6.12
- v2.6.11-tree
Permalinks
To reference or cite the objects present in the Software Heritage archive, permalinks based on SoftWare Hash IDentifiers (SWHIDs) must be used.
Select below a type of object currently browsed in order to display its associated SWHID and permalink.
Revision | Author | Date | Message | Commit Date |
---|---|---|---|---|
bbf5c97 | Linus Torvalds | 11 October 2020, 21:15:50 UTC | Linux 5.9 | 11 October 2020, 21:15:50 UTC |
3dd0130 | Linus Torvalds | 11 October 2020, 18:18:04 UTC | Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "Five fixes. Subsystems affected by this patch series: MAINTAINERS, mm/pagemap, mm/swap, and mm/hugetlb" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: khugepaged: recalculate min_free_kbytes after memory hotplug as expected by khugepaged mm: validate inode in mapping_set_error() mm: mmap: Fix general protection fault in unlink_file_vma() MAINTAINERS: Antoine Tenart's email address MAINTAINERS: change hardening mailing list | 11 October 2020, 18:18:04 UTC |
5b697f8 | Linus Torvalds | 11 October 2020, 18:11:35 UTC | Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fix from Al Viro: "Fixes an obvious bug (memory leak introduced in 5.8)" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: pipe: Fix memory leaks in create_pipe_files() | 11 October 2020, 18:11:35 UTC |
c120ec1 | Linus Torvalds | 11 October 2020, 17:53:37 UTC | Merge tag 'x86-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two fixes: - Fix a (hopefully final) IRQ state tracking bug vs MCE handling - Fix a documentation link" * tag 'x86-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation/x86: Fix incorrect references to zero-page.txt x86/mce: Use idtentry_nmi_enter/exit() | 11 October 2020, 17:53:37 UTC |
aa5c3a2 | Linus Torvalds | 11 October 2020, 17:43:37 UTC | Merge tag 'perf-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Ingo Molnar: "Fix an error handling bug that can cause a lockup if a CPU is offline (doh ...)" * tag 'perf-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix task_function_call() error handling | 11 October 2020, 17:43:37 UTC |
4aab2be | Vijay Balakrishna | 11 October 2020, 06:16:40 UTC | mm: khugepaged: recalculate min_free_kbytes after memory hotplug as expected by khugepaged When memory is hotplug added or removed the min_free_kbytes should be recalculated based on what is expected by khugepaged. Currently after hotplug, min_free_kbytes will be set to a lower default and higher default set when THP enabled is lost. This change restores min_free_kbytes as expected for THP consumers. [vijayb@linux.microsoft.com: v5] Link: https://lkml.kernel.org/r/1601398153-5517-1-git-send-email-vijayb@linux.microsoft.com Fixes: f000565adb77 ("thp: set recommended min free kbytes") Signed-off-by: Vijay Balakrishna <vijayb@linux.microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Allen Pais <apais@microsoft.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Song Liu <songliubraving@fb.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/1600305709-2319-2-git-send-email-vijayb@linux.microsoft.com Link: https://lkml.kernel.org/r/1600204258-13683-1-git-send-email-vijayb@linux.microsoft.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 October 2020, 17:31:11 UTC |
8b7b2eb | Minchan Kim | 11 October 2020, 06:16:37 UTC | mm: validate inode in mapping_set_error() The swap address_space doesn't have host. Thus, it makes kernel crash once swap write meets error. Fix it. Fixes: 735e4ae5ba28 ("vfs: track per-sb writeback errors and report them to syncfs") Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Jeff Layton <jlayton@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Andres Freund <andres@anarazel.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: David Howells <dhowells@redhat.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201010000650.750063-1-minchan@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 October 2020, 17:31:10 UTC |
bc4fe4c | Miaohe Lin | 11 October 2020, 06:16:34 UTC | mm: mmap: Fix general protection fault in unlink_file_vma() The syzbot reported the below general protection fault: general protection fault, probably for non-canonical address 0xe00eeaee0000003b: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x00777770000001d8-0x00777770000001df] CPU: 1 PID: 10488 Comm: syz-executor721 Not tainted 5.9.0-rc3-syzkaller #0 RIP: 0010:unlink_file_vma+0x57/0xb0 mm/mmap.c:164 Call Trace: free_pgtables+0x1b3/0x2f0 mm/memory.c:415 exit_mmap+0x2c0/0x530 mm/mmap.c:3184 __mmput+0x122/0x470 kernel/fork.c:1076 mmput+0x53/0x60 kernel/fork.c:1097 exit_mm kernel/exit.c:483 [inline] do_exit+0xa8b/0x29f0 kernel/exit.c:793 do_group_exit+0x125/0x310 kernel/exit.c:903 get_signal+0x428/0x1f00 kernel/signal.c:2757 arch_do_signal+0x82/0x2520 arch/x86/kernel/signal.c:811 exit_to_user_mode_loop kernel/entry/common.c:136 [inline] exit_to_user_mode_prepare+0x1ae/0x200 kernel/entry/common.c:167 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:242 entry_SYSCALL_64_after_hwframe+0x44/0xa9 It's because the ->mmap() callback can change vma->vm_file and fput the original file. But the commit d70cec898324 ("mm: mmap: merge vma after call_mmap() if possible") failed to catch this case and always fput() the original file, hence add an extra fput(). [ Thanks Hillf for pointing this extra fput() out. ] Fixes: d70cec898324 ("mm: mmap: merge vma after call_mmap() if possible") Reported-by: syzbot+c5d5a51dcbb558ca0cb5@syzkaller.appspotmail.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christian König <ckoenig.leichtzumerken@gmail.com> Cc: Hongxiang Lou <louhongxiang@huawei.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: John Hubbard <jhubbard@nvidia.com> Link: https://lkml.kernel.org/r/20200916090733.31427-1-linmiaohe@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 October 2020, 17:31:10 UTC |
512b557 | Antoine Tenart | 11 October 2020, 06:16:30 UTC | MAINTAINERS: Antoine Tenart's email address Use my kernel.org address instead of my bootlin.com one. Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/20201005164533.16811-1-atenart@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 October 2020, 17:31:10 UTC |
ae4a380 | Kees Cook | 11 October 2020, 06:16:27 UTC | MAINTAINERS: change hardening mailing list As more email from git history gets aimed at the OpenWall kernel-hardening@ list, there has been a desire to separate "new topics" from "on-going" work. To handle this, the superset of hardening email topics are now to be directed to linux-hardening@vger.kernel.org. Update the MAINTAINERS file and the .mailmap to accomplish this, so that linux-hardening@ can be treated like any other regular upstream kernel development list. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Emese Revfy <re.emese@gmail.com> Cc: "Tobin C. Harding" <me@tobin.cc> Cc: Tycho Andersen <tycho@tycho.pizza> Cc: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/linux-hardening/202010051443.279CC265D@keescook/ Link: https://lkml.kernel.org/r/20201006000012.2768958-1-keescook@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 October 2020, 17:31:10 UTC |
da69003 | Linus Torvalds | 10 October 2020, 23:09:12 UTC | Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Some more driver bugfixes for I2C. Including a revert - the updated series for it will come during the next merge window" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: owl: Clear NACK and BUS error bits Revert "i2c: imx: Fix reset of I2SR_IAL flag" i2c: meson: fixup rate calculation with filter delay i2c: meson: keep peripheral clock enabled i2c: meson: fix clock setting overwrite i2c: imx: Fix reset of I2SR_IAL flag | 10 October 2020, 23:09:12 UTC |
64b7f67 | Vladimir Zapolskiy | 10 October 2020, 18:25:54 UTC | cifs: Fix incomplete memory allocation on setxattr path On setxattr() syscall path due to an apprent typo the size of a dynamically allocated memory chunk for storing struct smb2_file_full_ea_info object is computed incorrectly, to be more precise the first addend is the size of a pointer instead of the wanted object size. Coincidentally it makes no difference on 64-bit platforms, however on 32-bit targets the following memcpy() writes 4 bytes of data outside of the dynamically allocated memory. ============================================================================= BUG kmalloc-16 (Not tainted): Redzone overwritten ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: 0x79e69a6f-0x9e5cdecf @offset=368. First byte 0x73 instead of 0xcc INFO: Slab 0xd36d2454 objects=85 used=51 fp=0xf7d0fc7a flags=0x35000201 INFO: Object 0x6f171df3 @offset=352 fp=0x00000000 Redzone 5d4ff02d: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 6f171df3: 00 00 00 00 00 05 06 00 73 6e 72 75 62 00 66 69 ........snrub.fi Redzone 79e69a6f: 73 68 32 0a sh2. Padding 56254d82: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 0 PID: 8196 Comm: attr Tainted: G B 5.9.0-rc8+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 Call Trace: dump_stack+0x54/0x6e print_trailer+0x12c/0x134 check_bytes_and_report.cold+0x3e/0x69 check_object+0x18c/0x250 free_debug_processing+0xfe/0x230 __slab_free+0x1c0/0x300 kfree+0x1d3/0x220 smb2_set_ea+0x27d/0x540 cifs_xattr_set+0x57f/0x620 __vfs_setxattr+0x4e/0x60 __vfs_setxattr_noperm+0x4e/0x100 __vfs_setxattr_locked+0xae/0xd0 vfs_setxattr+0x4e/0xe0 setxattr+0x12c/0x1a0 path_setxattr+0xa4/0xc0 __ia32_sys_lsetxattr+0x1d/0x20 __do_fast_syscall_32+0x40/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 Fixes: 5517554e4313 ("cifs: Add support for writing attributes on SMB2+") Signed-off-by: Vladimir Zapolskiy <vladimir@tuxera.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 10 October 2020, 22:52:54 UTC |
033b5d7 | Hugh Dickins | 10 October 2020, 03:07:59 UTC | mm/khugepaged: fix filemap page_to_pgoff(page) != offset There have been elusive reports of filemap_fault() hitting its VM_BUG_ON_PAGE(page_to_pgoff(page) != offset, page) on kernels built with CONFIG_READ_ONLY_THP_FOR_FS=y. Suren has hit it on a kernel with CONFIG_READ_ONLY_THP_FOR_FS=y and CONFIG_NUMA is not set: and he has analyzed it down to how khugepaged without NUMA reuses the same huge page after collapse_file() failed (whereas NUMA targets its allocation to the respective node each time). And most of us were usually testing with CONFIG_NUMA=y kernels. collapse_file(old start) new_page = khugepaged_alloc_page(hpage) __SetPageLocked(new_page) new_page->index = start // hpage->index=old offset new_page->mapping = mapping xas_store(&xas, new_page) filemap_fault page = find_get_page(mapping, offset) // if offset falls inside hpage then // compound_head(page) == hpage lock_page_maybe_drop_mmap() __lock_page(page) // collapse fails xas_store(&xas, old page) new_page->mapping = NULL unlock_page(new_page) collapse_file(new start) new_page = khugepaged_alloc_page(hpage) __SetPageLocked(new_page) new_page->index = start // hpage->index=new offset new_page->mapping = mapping // mapping becomes valid again // since compound_head(page) == hpage // page_to_pgoff(page) got changed VM_BUG_ON_PAGE(page_to_pgoff(page) != offset) An initial patch replaced __SetPageLocked() by lock_page(), which did fix the race which Suren illustrates above. But testing showed that it's not good enough: if the racing task's __lock_page() gets delayed long after its find_get_page(), then it may follow collapse_file(new start)'s successful final unlock_page(), and crash on the same VM_BUG_ON_PAGE. It could be fixed by relaxing filemap_fault()'s VM_BUG_ON_PAGE to a check and retry (as is done for mapping), with similar relaxations in find_lock_entry() and pagecache_get_page(): but it's not obvious what else might get caught out; and khugepaged non-NUMA appears to be unique in exposing a page to page cache, then revoking, without going through a full cycle of freeing before reuse. Instead, non-NUMA khugepaged_prealloc_page() release the old page if anyone else has a reference to it (1% of cases when I tested). Although never reported on huge tmpfs, I believe its find_lock_entry() has been at similar risk; but huge tmpfs does not rely on khugepaged for its normal working nearly so much as READ_ONLY_THP_FOR_FS does. Reported-by: Denis Lisov <dennis.lissov@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206569 Link: https://lore.kernel.org/linux-mm/?q=20200219144635.3b7417145de19b65f258c943%40linux-foundation.org Reported-by: Qian Cai <cai@lca.pw> Link: https://lore.kernel.org/linux-xfs/?q=20200616013309.GB815%40lca.pw Reported-and-analyzed-by: Suren Baghdasaryan <surenb@google.com> Fixes: 87c460a0bded ("mm/khugepaged: collapse_shmem() without freezing new_page") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # v4.9+ Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 10 October 2020, 22:52:54 UTC |
f5b3f43 | Cristian Ciocaltea | 08 October 2020, 21:44:39 UTC | i2c: owl: Clear NACK and BUS error bits When the NACK and BUS error bits are set by the hardware, the driver is responsible for clearing them by writing "1" into the corresponding status registers. Hence perform the necessary operations in owl_i2c_interrupt(). Fixes: d211e62af466 ("i2c: Add Actions Semiconductor Owl family S900 I2C driver") Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> | 10 October 2020, 11:15:46 UTC |
5a02e7c | Wolfram Sang | 10 October 2020, 11:03:54 UTC | Revert "i2c: imx: Fix reset of I2SR_IAL flag" This reverts commit fa4d30556883f2eaab425b88ba9904865a4d00f3. An updated version was sent. So, revert this version and give the new version more time for testing. Signed-off-by: Wolfram Sang <wsa@kernel.org> | 10 October 2020, 11:03:54 UTC |
6f2f486 | Linus Torvalds | 10 October 2020, 01:05:12 UTC | Merge tag 'spi-fix-v5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fix from Mark Brown: "One last minute fix for v5.9 which has been causing crashes in test systems with the fsl-dspi driver when they hit deferred probe (and which I probably let cook in next a bit longer than is ideal). And an update to MAINTAINERS reflecting Serge's extensive and detailed recent work on the DesignWare driver" * tag 'spi-fix-v5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: MAINTAINERS: Add maintainer of DW APB SSI driver spi: fsl-dspi: fix NULL pointer dereference | 10 October 2020, 01:05:12 UTC |
8a5f78d | Linus Torvalds | 09 October 2020, 18:49:22 UTC | Merge tag 'riscv-for-linus-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "Two fixes this week: - A fix to actually reserve the device tree's memory. Without this the device tree can be overwritten on systems that don't otherwise reserve it. This issue should only manifest on !MMU systems. - A workaround for a BUG() that triggers when the memory that originally contained initdata is freed and later repurposed. This triggers a BUG() on builds that had HARDENED_USERCOPY enabled" * tag 'riscv-for-linus-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fixup bootup failure with HARDENED_USERCOPY RISC-V: Make sure memblock reserves the memory containing DT | 09 October 2020, 18:49:22 UTC |
277e570 | Linus Torvalds | 09 October 2020, 18:38:07 UTC | Merge tag 'for-v5.9-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply fix from Sebastian Reichel: "Just a single change to revert enablement of packet error checking for battery data on Chromebooks, since some of their embedded controllers do not handle it correctly" * tag 'for-v5.9-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: sbs-battery: chromebook workaround for PEC | 09 October 2020, 18:38:07 UTC |
d813a8c | Linus Torvalds | 09 October 2020, 18:33:48 UTC | Merge tag 'gpio-v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Some late fixes: one IRQ issue and one compilation issue for UML. - Fix a compilation issue with User Mode Linux - Handle spurious interrupts properly in the PCA953x driver" * tag 'gpio-v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: pca953x: Survive spurious interrupts gpiolib: Disable compat ->read() code in UML case | 09 October 2020, 18:33:48 UTC |
f318052 | Linus Torvalds | 09 October 2020, 17:10:52 UTC | Merge tag 'mmc-v5.9-rc4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fix from Ulf Hansson: "Assign a proper discard granularity rather than incorrectly set it to zero" * tag 'mmc-v5.9-rc4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: don't set limits.discard_granularity as 0 | 09 October 2020, 17:10:52 UTC |
fd330b1 | Linus Torvalds | 09 October 2020, 16:59:36 UTC | Merge tag 'drm-fixes-2020-10-09' of git://anongit.freedesktop.org/drm/drm Pull amdgpu drm fixes from Dave Airlie: "Fixes trickling in this week. Alex had a final fix for the newest GPU they introduced in rc1, along with one build regression and one crasher fix. Cross my fingers that's it for 5.9: - Fix a crash on renoir if you override the IP discovery parameter - Fix the build on ARC platforms - Display fix for Sienna Cichlid" * tag 'drm-fixes-2020-10-09' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Change ABM config init interface drm/amdgpu/swsmu: fix ARC build errors drm/amdgpu: fix NULL pointer dereference for Renoir | 09 October 2020, 16:59:36 UTC |
4243219 | Coly Li | 02 October 2020, 01:38:52 UTC | mmc: core: don't set limits.discard_granularity as 0 In mmc_queue_setup_discard() the mmc driver queue's discard_granularity might be set as 0 (when card->pref_erase > max_discard) while the mmc device still declares to support discard operation. This is buggy and triggered the following kernel warning message, WARNING: CPU: 0 PID: 135 at __blkdev_issue_discard+0x200/0x294 CPU: 0 PID: 135 Comm: f2fs_discard-17 Not tainted 5.9.0-rc6 #1 Hardware name: Google Kevin (DT) pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--) pc : __blkdev_issue_discard+0x200/0x294 lr : __blkdev_issue_discard+0x54/0x294 sp : ffff800011dd3b10 x29: ffff800011dd3b10 x28: 0000000000000000 x27: ffff800011dd3cc4 x26: ffff800011dd3e18 x25: 000000000004e69b x24: 0000000000000c40 x23: ffff0000f1deaaf0 x22: ffff0000f2849200 x21: 00000000002734d8 x20: 0000000000000008 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000394 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 00000000000008b0 x9 : ffff800011dd3cb0 x8 : 000000000004e69b x7 : 0000000000000000 x6 : ffff0000f1926400 x5 : ffff0000f1940800 x4 : 0000000000000000 x3 : 0000000000000c40 x2 : 0000000000000008 x1 : 00000000002734d8 x0 : 0000000000000000 Call trace: __blkdev_issue_discard+0x200/0x294 __submit_discard_cmd+0x128/0x374 __issue_discard_cmd_orderly+0x188/0x244 __issue_discard_cmd+0x2e8/0x33c issue_discard_thread+0xe8/0x2f0 kthread+0x11c/0x120 ret_from_fork+0x10/0x1c ---[ end trace e4c8023d33dfe77a ]--- This patch fixes the issue by setting discard_granularity as SECTOR_SIZE instead of 0 when (card->pref_erase > max_discard) is true. Now no more complain from __blkdev_issue_discard() for the improper value of discard granularity. This issue is exposed after commit b35fd7422c2f ("block: check queue's limits.discard_granularity in __blkdev_issue_discard()"), a "Fixes:" tag is also added for the commit to make sure people won't miss this patch after applying the change of __blkdev_issue_discard(). Fixes: e056a1b5b67b ("mmc: queue: let host controllers specify maximum discard timeout") Fixes: b35fd7422c2f ("block: check queue's limits.discard_granularity in __blkdev_issue_discard()"). Reported-and-tested-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20201002013852.51968-1-colyli@suse.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> | 09 October 2020, 06:26:09 UTC |
6d6b8b9 | Kajol Jain | 27 August 2020, 06:47:32 UTC | perf: Fix task_function_call() error handling The error handling introduced by commit: 2ed6edd33a21 ("perf: Add cond_resched() to task_function_call()") looses any return value from smp_call_function_single() that is not {0, -EINVAL}. This is a problem because it will return -EXNIO when the target CPU is offline. Worse, in that case it'll turn into an infinite loop. Fixes: 2ed6edd33a21 ("perf: Add cond_resched() to task_function_call()") Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Barret Rhoden <brho@google.com> Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: https://lkml.kernel.org/r/20200827064732.20860-1-kjain@linux.ibm.com | 09 October 2020, 06:18:33 UTC |
dded93f | Dave Airlie | 09 October 2020, 03:02:49 UTC | Merge tag 'amd-drm-fixes-5.9-2020-10-08' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-10-08: amdgpu: - Fix a crash on renoir if you override the IP discovery parameter - Fix the build on ARC platforms - Display fix for Sienna Cichlid Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201009024917.3984-1-alexander.deucher@amd.com | 09 October 2020, 03:02:49 UTC |
583090b | Linus Torvalds | 09 October 2020, 01:48:34 UTC | Merge tag 'block5.9-2020-10-08' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "A few fixes that should go into this release: - NVMe controller error path reference fix (Chaitanya) - Fix regression with IBM partitions on non-dasd devices (Christoph) - Fix a missing clear in the compat CDROM packet structure (Peilin)" * tag 'block5.9-2020-10-08' of git://git.kernel.dk/linux-block: partitions/ibm: fix non-DASD devices nvme-core: put ctrl ref when module ref get fail block/scsi-ioctl: Fix kernel-infoleak in scsi_put_cdrom_generic_arg() | 09 October 2020, 01:48:34 UTC |
e3f2396 | Sebastian Reichel | 04 October 2020, 22:46:01 UTC | power: supply: sbs-battery: chromebook workaround for PEC Looks like the I2C tunnel implementation from Chromebook's embedded controller does not handle PEC correctly. Fix this by disabling PEC for batteries behind those I2C tunnels as a workaround. Note, that some Chromebooks actually have been reported to have working PEC support (with I2C tunnel). Since the problem has not yet been fully understood this simply reverts all Chromebooks to not use PEC for now. Reported-by: "Milan P. Stanić" <mps@arvanta.net> Reported-by: Vicente Bergas <vicencb@gmail.com> CC: Enric Balletbo i Serra <enric.balletbo@collabora.com> Fixes: 7222bd603dd2 ("power: supply: sbs-battery: add PEC support") Tested-by: Vicente Bergas <vicencb@gmail.com> Tested-by: "Milan P. Stanić" <mps@arvanta.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> | 08 October 2020, 23:09:37 UTC |
3fdd47c | Linus Torvalds | 08 October 2020, 21:25:46 UTC | Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull vhost fixes from Michael Tsirkin: "Some last minute vhost,vdpa fixes. The last two of them haven't been in next but they do seem kind of obvious, very small and safe, fix bugs reported in the field, and they are both in a new mlx5 vdpa driver, so it's not like we can introduce regressions" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Fix dependency on MLX5_CORE vdpa/mlx5: should keep avail_index despite device status vhost-vdpa: fix page pinning leakage in error path vhost-vdpa: fix vhost_vdpa_map() on error condition vhost: Don't call log_access_ok() when using IOTLB vhost: Use vhost_get_used_size() in vhost_vring_set_addr() vhost: Don't call access_ok() when using IOTLB vhost vdpa: fix vhost_vdpa_open error handling | 08 October 2020, 21:25:46 UTC |
33c8256 | Yongqiang Sun | 31 July 2020, 17:57:05 UTC | drm/amd/display: Change ABM config init interface [Why & How] change abm config init interface to support multiple ABMs. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 08 October 2020, 21:15:52 UTC |
6288c1d | Linus Torvalds | 08 October 2020, 21:11:21 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "One more set of fixes from the networking tree: - add missing input validation in nl80211_del_key(), preventing out-of-bounds access - last minute fix / improvement of a MRP netlink (uAPI) interface introduced in 5.9 (current) release - fix "unresolved symbol" build error under CONFIG_NET w/o CONFIG_INET due to missing tcp_timewait_sock and inet_timewait_sock BTF. - fix 32 bit sub-register bounds tracking in the bpf verifier for OR case - tcp: fix receive window update in tcp_add_backlog() - openvswitch: handle DNAT tuple collision in conntrack-related code - r8169: wait for potential PHY reset to finish after applying a FW file, avoiding unexpected PHY behaviour and failures later on - mscc: fix tail dropping watermarks for Ocelot switches - avoid use-after-free in macsec code after a call to the GRO layer - avoid use-after-free in sctp error paths - add a device id for Cellient MPL200 WWAN card - rxrpc fixes: - fix the xdr encoding of the contents read from an rxrpc key - fix a BUG() for a unsupported encoding type. - fix missing _bh lock annotations. - fix acceptance handling for an incoming call where the incoming call is encrypted. - the server token keyring isn't network namespaced - it belongs to the server, so there's no need. Namespacing it means that request_key() fails to find it. - fix a leak of the server keyring" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (21 commits) net: usb: qmi_wwan: add Cellient MPL200 card macsec: avoid use-after-free in macsec_handle_frame() r8169: consider that PHY reset may still be in progress after applying firmware openvswitch: handle DNAT tuple collision sctp: fix sctp_auth_init_hmacs() error path bridge: Netlink interface fix. net: wireless: nl80211: fix out-of-bounds access in nl80211_del_key() bpf: Fix scalar32_min_max_or bounds tracking tcp: fix receive window update in tcp_add_backlog() net: usb: rtl8150: set random MAC address when set_ethernet_addr() fails mptcp: more DATA FIN fixes net: mscc: ocelot: warn when encoding an out-of-bounds watermark value net: mscc: ocelot: divide watermark value by 60 when writing to SYS_ATOP net: qrtr: ns: Fix the incorrect usage of rcu_read_lock() rxrpc: Fix server keyring leak rxrpc: The server keyring isn't network-namespaced rxrpc: Fix accept on a connection that need securing rxrpc: Fix some missing _bh annotations on locking conn->state_lock rxrpc: Downgrade the BUG() for unsupported token type in rxrpc_read() rxrpc: Fix rxkad token xdr encoding ... | 08 October 2020, 21:11:21 UTC |
aff9077 | Eli Cohen | 07 October 2020, 06:40:11 UTC | vdpa/mlx5: Fix dependency on MLX5_CORE Remove propmt for selecting MLX5_VDPA by the user and modify MLX5_VDPA_NET to select MLX5_VDPA. Also modify MLX5_VDPA_NET to depend on mlx5_core. This fixes an issue where configuration sets 'y' for MLX5_VDPA_NET while MLX5_CORE is compiled as a module causing link errors. Reported-by: kernel test robot <lkp@intel.com> Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 device")s Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20201007064011.GA50074@mtl-vdi-166.wap.labs.mlnx Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 08 October 2020, 20:02:00 UTC |
3176e97 | Si-Wei Liu | 01 October 2020, 20:18:31 UTC | vdpa/mlx5: should keep avail_index despite device status A VM with mlx5 vDPA has below warnings while being reset: vhost VQ 0 ring restore failed: -1: Resource temporarily unavailable (11) vhost VQ 1 ring restore failed: -1: Resource temporarily unavailable (11) We should allow userspace emulating the virtio device be able to get to vq's avail_index, regardless of vDPA device status. Save the index that was last seen when virtq was stopped, so that userspace doesn't complain. Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Link: https://lore.kernel.org/r/1601583511-15138-1-git-send-email-si-wei.liu@oracle.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eli Cohen <elic@nvidia.com> | 08 October 2020, 20:02:00 UTC |
28802e7 | Wilken Gottwalt | 08 October 2020, 07:21:38 UTC | net: usb: qmi_wwan: add Cellient MPL200 card Add usb ids of the Cellient MPL200 card. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@mailbox.org> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 08 October 2020, 19:26:31 UTC |
c7cc920 | Eric Dumazet | 07 October 2020, 08:42:46 UTC | macsec: avoid use-after-free in macsec_handle_frame() De-referencing skb after call to gro_cells_receive() is not allowed. We need to fetch skb->len earlier. Fixes: 5491e7c6b1a9 ("macsec: enable GRO and RPS on macsec devices") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 08 October 2020, 19:21:08 UTC |
47dda78 | Heiner Kallweit | 07 October 2020, 11:34:51 UTC | r8169: consider that PHY reset may still be in progress after applying firmware Some firmware files trigger a PHY soft reset and don't wait for it to be finished. PHY register writes directly after applying the firmware may fail or provide unexpected results therefore. Fix this by waiting for bit BMCR_RESET to be cleared after applying firmware. There's nothing wrong with the referenced change, it's just that the fix will apply cleanly only after this change. Fixes: 89fbd26cca7e ("r8169: fix firmware not resetting tp->ocp_base") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 08 October 2020, 19:20:51 UTC |
8aa7b52 | Dumitru Ceara | 07 October 2020, 15:48:03 UTC | openvswitch: handle DNAT tuple collision With multiple DNAT rules it's possible that after destination translation the resulting tuples collide. For example, two openvswitch flows: nw_dst=10.0.0.10,tp_dst=10, actions=ct(commit,table=2,nat(dst=20.0.0.1:20)) nw_dst=10.0.0.20,tp_dst=10, actions=ct(commit,table=2,nat(dst=20.0.0.1:20)) Assuming two TCP clients initiating the following connections: 10.0.0.10:5000->10.0.0.10:10 10.0.0.10:5000->10.0.0.20:10 Both tuples would translate to 10.0.0.10:5000->20.0.0.1:20 causing nf_conntrack_confirm() to fail because of tuple collision. Netfilter handles this case by allocating a null binding for SNAT at egress by default. Perform the same operation in openvswitch for DNAT if no explicit SNAT is requested by the user and allocate a null binding for SNAT for packets in the "original" direction. Reported-at: https://bugzilla.redhat.com/1877128 Suggested-by: Florian Westphal <fw@strlen.de> Fixes: 05752523e565 ("openvswitch: Interface with NAT.") Signed-off-by: Dumitru Ceara <dceara@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 08 October 2020, 19:20:35 UTC |
d42ee76 | Eric Dumazet | 08 October 2020, 08:38:31 UTC | sctp: fix sctp_auth_init_hmacs() error path After freeing ep->auth_hmacs we have to clear the pointer or risk use-after-free as reported by syzbot: BUG: KASAN: use-after-free in sctp_auth_destroy_hmacs net/sctp/auth.c:509 [inline] BUG: KASAN: use-after-free in sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] BUG: KASAN: use-after-free in sctp_auth_free+0x17e/0x1d0 net/sctp/auth.c:1070 Read of size 8 at addr ffff8880a8ff52c0 by task syz-executor941/6874 CPU: 0 PID: 6874 Comm: syz-executor941 Not tainted 5.9.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 sctp_auth_destroy_hmacs net/sctp/auth.c:509 [inline] sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] sctp_auth_free+0x17e/0x1d0 net/sctp/auth.c:1070 sctp_endpoint_destroy+0x95/0x240 net/sctp/endpointola.c:203 sctp_endpoint_put net/sctp/endpointola.c:236 [inline] sctp_endpoint_free+0xd6/0x110 net/sctp/endpointola.c:183 sctp_destroy_sock+0x9c/0x3c0 net/sctp/socket.c:4981 sctp_v6_destroy_sock+0x11/0x20 net/sctp/socket.c:9415 sk_common_release+0x64/0x390 net/core/sock.c:3254 sctp_close+0x4ce/0x8b0 net/sctp/socket.c:1533 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 inet6_release+0x4c/0x70 net/ipv6/af_inet6.c:475 __sock_release+0xcd/0x280 net/socket.c:596 sock_close+0x18/0x20 net/socket.c:1277 __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 exit_task_work include/linux/task_work.h:25 [inline] do_exit+0xb7d/0x29f0 kernel/exit.c:806 do_group_exit+0x125/0x310 kernel/exit.c:903 __do_sys_exit_group kernel/exit.c:914 [inline] __se_sys_exit_group kernel/exit.c:912 [inline] __x64_sys_exit_group+0x3a/0x50 kernel/exit.c:912 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x43f278 Code: Bad RIP value. RSP: 002b:00007fffe0995c38 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000000000043f278 RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 RBP: 00000000004bf068 R08: 00000000000000e7 R09: ffffffffffffffd0 R10: 0000000020000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00000000006d1180 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 6874: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:461 kmem_cache_alloc_trace+0x174/0x300 mm/slab.c:3554 kmalloc include/linux/slab.h:554 [inline] kmalloc_array include/linux/slab.h:593 [inline] kcalloc include/linux/slab.h:605 [inline] sctp_auth_init_hmacs+0xdb/0x3b0 net/sctp/auth.c:464 sctp_auth_init+0x8a/0x4a0 net/sctp/auth.c:1049 sctp_setsockopt_auth_supported net/sctp/socket.c:4354 [inline] sctp_setsockopt+0x477e/0x97f0 net/sctp/socket.c:4631 __sys_setsockopt+0x2db/0x610 net/socket.c:2132 __do_sys_setsockopt net/socket.c:2143 [inline] __se_sys_setsockopt net/socket.c:2140 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2140 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 6874: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xd8/0x120 mm/kasan/common.c:422 __cache_free mm/slab.c:3422 [inline] kfree+0x10e/0x2b0 mm/slab.c:3760 sctp_auth_destroy_hmacs net/sctp/auth.c:511 [inline] sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] sctp_auth_init_hmacs net/sctp/auth.c:496 [inline] sctp_auth_init_hmacs+0x2b7/0x3b0 net/sctp/auth.c:454 sctp_auth_init+0x8a/0x4a0 net/sctp/auth.c:1049 sctp_setsockopt_auth_supported net/sctp/socket.c:4354 [inline] sctp_setsockopt+0x477e/0x97f0 net/sctp/socket.c:4631 __sys_setsockopt+0x2db/0x610 net/socket.c:2132 __do_sys_setsockopt net/socket.c:2143 [inline] __se_sys_setsockopt net/socket.c:2140 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2140 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1f485649f529 ("[SCTP]: Implement SCTP-AUTH internals") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 08 October 2020, 19:19:51 UTC |
a9e54cb | Jakub Kicinski | 08 October 2020, 19:18:34 UTC | Merge tag 'mac80211-for-net-2020-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== pull-request: mac80211 2020-10-08 A single fix for missing input validation in nl80211. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 08 October 2020, 19:18:34 UTC |
cfe90f4 | Jakub Kicinski | 08 October 2020, 19:05:37 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2020-10-08 The main changes are: 1) Fix "unresolved symbol" build error under CONFIG_NET w/o CONFIG_INET due to missing tcp_timewait_sock and inet_timewait_sock BTF, from Yonghong Song. 2) Fix 32 bit sub-register bounds tracking for OR case, from Daniel Borkmann. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 08 October 2020, 19:05:37 UTC |
b6c02ef | Henrik Bjoernlund | 07 October 2020, 12:07:00 UTC | bridge: Netlink interface fix. This commit is correcting NETLINK br_fill_ifinfo() to be able to handle 'filter_mask' with multiple flags asserted. Fixes: 36a8e8e265420 ("bridge: Extend br_fill_ifinfo to return MPR status") Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Suggested-by: Nikolay Aleksandrov <nikolay@nvidia.com> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 08 October 2020, 19:05:07 UTC |
3d006ee | Linus Torvalds | 08 October 2020, 18:14:17 UTC | Merge tag 'drm-fixes-2020-10-08' of git://anongit.freedesktop.org/drm/drm Pull drm nouveau fixes from Dave Airlie: "Karol found two last minute nouveau fixes, they both fix crashes, the TTM one follows what other drivers do already, and the other is for bailing on load on unrecognised chipsets. - fix crash in TTM alloc fail path - return error earlier for unknown chipsets" * tag 'drm-fixes-2020-10-08' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/mem: guard against NULL pointer access in mem_del drm/nouveau/device: return error for unknown chipsets | 08 October 2020, 18:14:17 UTC |
b9e3aa2 | Linus Torvalds | 08 October 2020, 18:10:13 UTC | Merge tag 'exfat-for-5.9-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat Pull exfat fixes from Namjae Jeon: - Fix use of uninitialized spinlock on error path - Fix missing err assignment in exfat_build_inode() * tag 'exfat-for-5.9-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: fix use of uninitialized spinlock on error path exfat: fix pointer error checking | 08 October 2020, 18:10:13 UTC |
86f0a5f | Linus Torvalds | 08 October 2020, 18:01:53 UTC | Merge tag 'for-linus-5.9b-rc9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "One fix for a regression when booting as a Xen guest on ARM64 introduced probably during the 5.9 cycle. It is very low risk as it is modifying Xen specific code only. The exact commit introducing the bug hasn't been identified yet, but everything was fine in 5.8 and only in 5.9 some configurations started to fail" * tag 'for-linus-5.9b-rc9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: arm/arm64: xen: Fix to convert percpu address to gfn correctly | 08 October 2020, 18:01:53 UTC |
ec0fa0b | David Howells | 07 October 2020, 13:22:12 UTC | afs: Fix deadlock between writeback and truncate The afs filesystem has a lock[*] that it uses to serialise I/O operations going to the server (vnode->io_lock), as the server will only perform one modification operation at a time on any given file or directory. This prevents the the filesystem from filling up all the call slots to a server with calls that aren't going to be executed in parallel anyway, thereby allowing operations on other files to obtain slots. [*] Note that is probably redundant for directories at least since i_rwsem is used to serialise directory modifications and lookup/reading vs modification. The server does allow parallel non-modification ops, however. When a file truncation op completes, we truncate the in-memory copy of the file to match - but we do it whilst still holding the io_lock, the idea being to prevent races with other operations. However, if writeback starts in a worker thread simultaneously with truncation (whilst notify_change() is called with i_rwsem locked, writeback pays it no heed), it may manage to set PG_writeback bits on the pages that will get truncated before afs_setattr_success() manages to call truncate_pagecache(). Truncate will then wait for those pages - whilst still inside io_lock: # cat /proc/8837/stack [<0>] wait_on_page_bit_common+0x184/0x1e7 [<0>] truncate_inode_pages_range+0x37f/0x3eb [<0>] truncate_pagecache+0x3c/0x53 [<0>] afs_setattr_success+0x4d/0x6e [<0>] afs_wait_for_operation+0xd8/0x169 [<0>] afs_do_sync_operation+0x16/0x1f [<0>] afs_setattr+0x1fb/0x25d [<0>] notify_change+0x2cf/0x3c4 [<0>] do_truncate+0x7f/0xb2 [<0>] do_sys_ftruncate+0xd1/0x104 [<0>] do_syscall_64+0x2d/0x3a [<0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 The writeback operation, however, stalls indefinitely because it needs to get the io_lock to proceed: # cat /proc/5940/stack [<0>] afs_get_io_locks+0x58/0x1ae [<0>] afs_begin_vnode_operation+0xc7/0xd1 [<0>] afs_store_data+0x1b2/0x2a3 [<0>] afs_write_back_from_locked_page+0x418/0x57c [<0>] afs_writepages_region+0x196/0x224 [<0>] afs_writepages+0x74/0x156 [<0>] do_writepages+0x2d/0x56 [<0>] __writeback_single_inode+0x84/0x207 [<0>] writeback_sb_inodes+0x238/0x3cf [<0>] __writeback_inodes_wb+0x68/0x9f [<0>] wb_writeback+0x145/0x26c [<0>] wb_do_writeback+0x16a/0x194 [<0>] wb_workfn+0x74/0x177 [<0>] process_one_work+0x174/0x264 [<0>] worker_thread+0x117/0x1b9 [<0>] kthread+0xec/0xf1 [<0>] ret_from_fork+0x1f/0x30 and thus deadlock has occurred. Note that whilst afs_setattr() calls filemap_write_and_wait(), the fact that the caller is holding i_rwsem doesn't preclude more pages being dirtied through an mmap'd region. Fix this by: (1) Use the vnode validate_lock to mediate access between afs_setattr() and afs_writepages(): (a) Exclusively lock validate_lock in afs_setattr() around the whole RPC operation. (b) If WB_SYNC_ALL isn't set on entry to afs_writepages(), trying to shared-lock validate_lock and returning immediately if we couldn't get it. (c) If WB_SYNC_ALL is set, wait for the lock. The validate_lock is also used to validate a file and to zap its cache if the file was altered by a third party, so it's probably a good fit for this. (2) Move the truncation outside of the io_lock in setattr, using the same hook as is used for local directory editing. This requires the old i_size to be retained in the operation record as we commit the revised status to the inode members inside the io_lock still, but we still need to know if we reduced the file size. Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 October 2020, 17:50:55 UTC |
f3c64ed | Linus Torvalds | 28 September 2020, 19:50:03 UTC | mm: avoid early COW write protect games during fork() In commit 70e806e4e645 ("mm: Do early cow for pinned pages during fork() for ptes") we write-protected the PTE before doing the page pinning check, in order to avoid a race with concurrent fast-GUP pinning (which doesn't take the mm semaphore or the page table lock). That trick doesn't actually work - it doesn't handle memory ordering properly, and doing so would be prohibitively expensive. It also isn't really needed. While we're moving in the direction of allowing and supporting page pinning without marking the pinned area with MADV_DONTFORK, the fact is that we've never really supported this kind of odd "concurrent fork() and page pinning", and doing the serialization on a pte level is just wrong. We can add serialization with a per-mm sequence counter, so we know how to solve that race properly, but we'll do that at a more appropriate time. Right now this just removes the write protect games. It also turns out that the write protect games actually break on Power, as reported by Aneesh Kumar: "Architecture like ppc64 expects set_pte_at to be not used for updating a valid pte. This is further explained in commit 56eecdb912b5 ("mm: Use ptep/pmdp_set_numa() for updating _PAGE_NUMA bit")" and the code triggered a warning there: WARNING: CPU: 0 PID: 30613 at arch/powerpc/mm/pgtable.c:185 set_pte_at+0x2a8/0x3a0 arch/powerpc/mm/pgtable.c:185 Call Trace: copy_present_page mm/memory.c:857 [inline] copy_present_pte mm/memory.c:899 [inline] copy_pte_range mm/memory.c:1014 [inline] copy_pmd_range mm/memory.c:1092 [inline] copy_pud_range mm/memory.c:1127 [inline] copy_p4d_range mm/memory.c:1150 [inline] copy_page_range+0x1f6c/0x2cc0 mm/memory.c:1212 dup_mmap kernel/fork.c:592 [inline] dup_mm+0x77c/0xab0 kernel/fork.c:1355 copy_mm kernel/fork.c:1411 [inline] copy_process+0x1f00/0x2740 kernel/fork.c:2070 _do_fork+0xc4/0x10b0 kernel/fork.c:2429 Link: https://lore.kernel.org/lkml/CAHk-=wiWr+gO0Ro4LvnJBMs90OiePNyrE3E+pJvc9PzdBShdmw@mail.gmail.com/ Link: https://lore.kernel.org/linuxppc-dev/20201008092541.398079-1-aneesh.kumar@linux.ibm.com/ Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Tested-by: Leon Romanovsky <leonro@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Kirill Shutemov <kirill@shutemov.name> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 October 2020, 17:11:32 UTC |
3dc289f | Anant Thazhemadam | 07 October 2020, 03:54:01 UTC | net: wireless: nl80211: fix out-of-bounds access in nl80211_del_key() In nl80211_parse_key(), key.idx is first initialized as -1. If this value of key.idx remains unmodified and gets returned, and nl80211_key_allowed() also returns 0, then rdev_del_key() gets called with key.idx = -1. This causes an out-of-bounds array access. Handle this issue by checking if the value of key.idx after nl80211_parse_key() is called and return -EINVAL if key.idx < 0. Cc: stable@vger.kernel.org Reported-by: syzbot+b1bb342d1d097516cbda@syzkaller.appspotmail.com Tested-by: syzbot+b1bb342d1d097516cbda@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201007035401.9522-1-anant.thazhemadam@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> | 08 October 2020, 10:37:25 UTC |
1334d3b | Nicolas Belin | 07 October 2020, 08:07:51 UTC | i2c: meson: fixup rate calculation with filter delay Apparently, 15 cycles of the peripheral clock are used by the controller for sampling and filtering. Because this was not known before, the rate calculation is slightly off. Clean up and fix the calculation taking this filtering delay into account. Fixes: 30021e3707a7 ("i2c: add support for Amlogic Meson I2C controller") Signed-off-by: Nicolas Belin <nbelin@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> | 08 October 2020, 09:57:23 UTC |
79e137b | Jerome Brunet | 07 October 2020, 08:07:50 UTC | i2c: meson: keep peripheral clock enabled SCL rate appears to be different than what is expected. For example, We get 164kHz on i2c3 of the vim3 when 400kHz is expected. This is partially due to the peripheral clock being disabled when the clock is set. Let's keep the peripheral clock on after probe to fix the problem. This does not affect the SCL output which is still gated when i2c is idle. Fixes: 09af1c2fa490 ("i2c: meson: set clock divider in probe instead of setting it for each transfer") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> | 08 October 2020, 09:57:14 UTC |
28683e8 | Jerome Brunet | 07 October 2020, 08:07:49 UTC | i2c: meson: fix clock setting overwrite When the slave address is written in do_start(), SLAVE_ADDR is written completely. This may overwrite some setting related to the clock rate or signal filtering. Fix this by writing only the bits related to slave address. To avoid causing unexpected changed, explicitly disable filtering or high/low clock mode which may have been left over by the bootloader. Fixes: 30021e3707a7 ("i2c: add support for Amlogic Meson I2C controller") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> | 08 October 2020, 09:57:06 UTC |
fa4d305 | Christian Eggers | 07 October 2020, 08:45:22 UTC | i2c: imx: Fix reset of I2SR_IAL flag According to the "VFxxx Controller Reference Manual" (and the comment block starting at line 97), Vybrid requires writing a one for clearing an interrupt flag. Syncing the method for clearing I2SR_IIF in i2c_imx_isr(). Signed-off-by: Christian Eggers <ceggers@arri.de> Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang <wsa@kernel.org> | 08 October 2020, 09:54:54 UTC |
5b9fbeb | Daniel Borkmann | 07 October 2020, 13:48:58 UTC | bpf: Fix scalar32_min_max_or bounds tracking Simon reported an issue with the current scalar32_min_max_or() implementation. That is, compared to the other 32 bit subreg tracking functions, the code in scalar32_min_max_or() stands out that it's using the 64 bit registers instead of 32 bit ones. This leads to bounds tracking issues, for example: [...] 8: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 8: (79) r1 = *(u64 *)(r0 +0) R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 9: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 9: (b7) r0 = 1 10: R0_w=inv1 R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 10: (18) r2 = 0x600000002 12: R0_w=inv1 R1_w=inv(id=0) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 12: (ad) if r1 < r2 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: (95) exit 14: R0_w=inv1 R1_w=inv(id=0,umax_value=25769803777,var_off=(0x0; 0x7ffffffff)) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 14: (25) if r1 > 0x0 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: (95) exit 16: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=25769803777,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 16: (47) r1 |= 0 17: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=32212254719,var_off=(0x1; 0x700000000),s32_max_value=1,u32_max_value=1) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm [...] The bound tests on the map value force the upper unsigned bound to be 25769803777 in 64 bit (0b11000000000000000000000000000000001) and then lower one to be 1. By using OR they are truncated and thus result in the range [1,1] for the 32 bit reg tracker. This is incorrect given the only thing we know is that the value must be positive and thus 2147483647 (0b1111111111111111111111111111111) at max for the subregs. Fix it by using the {u,s}32_{min,max}_value vars instead. This also makes sense, for example, for the case where we update dst_reg->s32_{min,max}_value in the else branch we need to use the newly computed dst_reg->u32_{min,max}_value as we know that these are positive. Previously, in the else branch the 64 bit values of umin_value=1 and umax_value=32212254719 were used and latter got truncated to be 1 as upper bound there. After the fix the subreg range is now correct: [...] 8: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 8: (79) r1 = *(u64 *)(r0 +0) R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 9: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 9: (b7) r0 = 1 10: R0_w=inv1 R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 10: (18) r2 = 0x600000002 12: R0_w=inv1 R1_w=inv(id=0) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 12: (ad) if r1 < r2 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: (95) exit 14: R0_w=inv1 R1_w=inv(id=0,umax_value=25769803777,var_off=(0x0; 0x7ffffffff)) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 14: (25) if r1 > 0x0 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: (95) exit 16: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=25769803777,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 16: (47) r1 |= 0 17: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=32212254719,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm [...] Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Simon Scannell <scannell.smn@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> | 08 October 2020, 09:02:53 UTC |
dcba603 | Alex Deucher | 06 October 2020, 13:20:47 UTC | drm/amdgpu/swsmu: fix ARC build errors We want to use the dev_* functions here rather than the pr_* variants. Switch to using dev_warn() which mirrors what we do on other asics. Fixes the following build errors on ARC: ../drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c: In function 'navi10_fill_i2c_req': ../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration] ../drivers/gpu/drm/amd/amdgpu/../powerplay/sienna_cichlid_ppt.c: In function 'sienna_cichlid_fill_i2c_req': ../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration] Reported-by: kernel test robot <lkp@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Evan Quan <evan.quan@amd.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 07 October 2020, 21:04:27 UTC |
33eade2 | Dirk Gouders | 01 October 2020, 19:55:25 UTC | drm/amdgpu: fix NULL pointer dereference for Renoir Commit c1cf79ca5ced46 ("drm/amdgpu: use IP discovery table for renoir") introduced a NULL pointer dereference when booting with amdgpu.discovery=0, because it removed the call of vega10_reg_base_init() for that case. Fix this by calling that funcion if amdgpu_discovery == 0 in addition to the case that amdgpu_discovery_reg_base_init() failed. Fixes: c1cf79ca5ced46 ("drm/amdgpu: use IP discovery table for renoir") Signed-off-by: Dirk Gouders <dirk@gouders.net> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 07 October 2020, 21:03:08 UTC |
e0894cd | Jens Axboe | 07 October 2020, 14:24:09 UTC | Merge tag 'nvme-5.9-2020-10-07' of git://git.infradead.org/nvme into block-5.9 Pull NVMe fix from Christoph: "nvme fix for 5.9: - fix a recently introduced controller leak (Logan Gunthorpe)" * tag 'nvme-5.9-2020-10-07' of git://git.infradead.org/nvme: nvme-core: put ctrl ref when module ref get fail | 07 October 2020, 14:24:09 UTC |
7370997 | Christoph Hellwig | 07 October 2020, 12:40:09 UTC | partitions/ibm: fix non-DASD devices Don't error out if the dasd_biodasdinfo symbol is not available. Cc: stable@vger.kernel.org Fixes: 26d7e28e3820 ("s390/dasd: remove ioctl_by_bdev calls") Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 07 October 2020, 13:55:35 UTC |
8b81edd | Marc Zyngier | 05 October 2020, 14:02:17 UTC | gpio: pca953x: Survive spurious interrupts The pca953x driver never checks the result of irq_find_mapping(), which returns 0 when no mapping is found. When a spurious interrupt is delivered (which can happen under obscure circumstances), the kernel explodes as it still tries to handle the error code as a real interrupt. Handle this particular case and warn on spurious interrupts. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201005140217.1390851-1-maz@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 07 October 2020, 09:47:41 UTC |
47e538d | Andy Shevchenko | 05 October 2020, 13:10:44 UTC | gpiolib: Disable compat ->read() code in UML case It appears that UML (arch/um) has no compat.h header defined and hence can't compile a recently provided piece of code in GPIO library. Disable compat ->read() code in UML case to avoid compilation errors. While at it, use pattern which is already being used in the kernel elsewhere. Fixes: 5ad284ab3a01 ("gpiolib: Fix line event handling in syscall compatible mode") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20201005131044.87276-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 07 October 2020, 09:42:03 UTC |
4bab690 | Chaitanya Kulkarni | 06 October 2020, 23:36:47 UTC | nvme-core: put ctrl ref when module ref get fail When try_module_get() fails in the nvme_dev_open() it returns without releasing the ctrl reference which was taken earlier. Put the ctrl reference which is taken before calling the try_module_get() in the error return code path. Fixes: 52a3974feb1a "nvme-core: get/put ctrl and transport module in nvme_dev_open/release()" Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Christoph Hellwig <hch@lst.de> | 07 October 2020, 05:55:40 UTC |
d10285a | Karol Herbst | 06 October 2020, 22:05:28 UTC | drm/nouveau/mem: guard against NULL pointer access in mem_del other drivers seems to do something similar Signed-off-by: Karol Herbst <kherbst@redhat.com> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Dave Airlie <airlied@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201006220528.13925-2-kherbst@redhat.com | 07 October 2020, 05:33:09 UTC |
c3e0276 | Karol Herbst | 06 October 2020, 22:05:27 UTC | drm/nouveau/device: return error for unknown chipsets Previously the code relied on device->pri to be NULL and to fail probing later. We really should just return an error inside nvkm_device_ctor for unsupported GPUs. Fixes: 24d5ff40a732 ("drm/nouveau/device: rework mmio mapping code to get rid of second map") Signed-off-by: Karol Herbst <kherbst@redhat.com> Cc: dann frazier <dann.frazier@canonical.com> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Dave Airlie <airlied@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Jeremy Cline <jcline@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201006220528.13925-1-kherbst@redhat.com | 07 October 2020, 05:33:00 UTC |
8ff006e | Namjae Jeon | 29 September 2020, 00:09:49 UTC | exfat: fix use of uninitialized spinlock on error path syzbot reported warning message: Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1d6/0x29e lib/dump_stack.c:118 register_lock_class+0xf06/0x1520 kernel/locking/lockdep.c:893 __lock_acquire+0xfd/0x2ae0 kernel/locking/lockdep.c:4320 lock_acquire+0x148/0x720 kernel/locking/lockdep.c:5029 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:354 [inline] exfat_cache_inval_inode+0x30/0x280 fs/exfat/cache.c:226 exfat_evict_inode+0x124/0x270 fs/exfat/inode.c:660 evict+0x2bb/0x6d0 fs/inode.c:576 exfat_fill_super+0x1e07/0x27d0 fs/exfat/super.c:681 get_tree_bdev+0x3e9/0x5f0 fs/super.c:1342 vfs_get_tree+0x88/0x270 fs/super.c:1547 do_new_mount fs/namespace.c:2875 [inline] path_mount+0x179d/0x29e0 fs/namespace.c:3192 do_mount fs/namespace.c:3205 [inline] __do_sys_mount fs/namespace.c:3413 [inline] __se_sys_mount+0x126/0x180 fs/namespace.c:3390 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 If exfat_read_root() returns an error, spinlock is used in exfat_evict_inode() without initialization. This patch combines exfat_cache_init_inode() with exfat_inode_init_once() to initialize spinlock by slab constructor. Fixes: c35b6810c495 ("exfat: add exfat cache") Cc: stable@vger.kernel.org # v5.7+ Reported-by: syzbot <syzbot+b91107320911a26c9a95@syzkaller.appspotmail.com> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> | 07 October 2020, 05:27:13 UTC |
d6c9efd | Tetsuhiro Kohada | 26 August 2020, 01:18:29 UTC | exfat: fix pointer error checking Fix missing result check of exfat_build_inode(). And use PTR_ERR_OR_ZERO instead of PTR_ERR. Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> | 07 October 2020, 05:26:55 UTC |
5a06771 | Masami Hiramatsu | 06 October 2020, 06:49:31 UTC | arm/arm64: xen: Fix to convert percpu address to gfn correctly Use per_cpu_ptr_to_phys() instead of virt_to_phys() for per-cpu address conversion. In xen_starting_cpu(), per-cpu xen_vcpu_info address is converted to gfn by virt_to_gfn() macro. However, since the virt_to_gfn(v) assumes the given virtual address is in linear mapped kernel memory area, it can not convert the per-cpu memory if it is allocated on vmalloc area. This depends on CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK. If it is enabled, the first chunk of percpu memory is linear mapped. In the other case, that is allocated from vmalloc area. Moreover, if the first chunk of percpu has run out until allocating xen_vcpu_info, it will be allocated on the 2nd chunk, which is based on kernel memory or vmalloc memory (depends on CONFIG_NEED_PER_CPU_KM). Without this fix and kernel configured to use vmalloc area for the percpu memory, the Dom0 kernel will fail to boot with following errors. [ 0.466172] Xen: initializing cpu0 [ 0.469601] ------------[ cut here ]------------ [ 0.474295] WARNING: CPU: 0 PID: 1 at arch/arm64/xen/../../arm/xen/enlighten.c:153 xen_starting_cpu+0x160/0x180 [ 0.484435] Modules linked in: [ 0.487565] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc4+ #4 [ 0.493895] Hardware name: Socionext Developer Box (DT) [ 0.499194] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--) [ 0.504836] pc : xen_starting_cpu+0x160/0x180 [ 0.509263] lr : xen_starting_cpu+0xb0/0x180 [ 0.513599] sp : ffff8000116cbb60 [ 0.516984] x29: ffff8000116cbb60 x28: ffff80000abec000 [ 0.522366] x27: 0000000000000000 x26: 0000000000000000 [ 0.527754] x25: ffff80001156c000 x24: fffffdffbfcdb600 [ 0.533129] x23: 0000000000000000 x22: 0000000000000000 [ 0.538511] x21: ffff8000113a99c8 x20: ffff800010fe4f68 [ 0.543892] x19: ffff8000113a9988 x18: 0000000000000010 [ 0.549274] x17: 0000000094fe0f81 x16: 00000000deadbeef [ 0.554655] x15: ffffffffffffffff x14: 0720072007200720 [ 0.560037] x13: 0720072007200720 x12: 0720072007200720 [ 0.565418] x11: 0720072007200720 x10: 0720072007200720 [ 0.570801] x9 : ffff8000100fbdc0 x8 : ffff800010715208 [ 0.576182] x7 : 0000000000000054 x6 : ffff00001b790f00 [ 0.581564] x5 : ffff800010bbf880 x4 : 0000000000000000 [ 0.586945] x3 : 0000000000000000 x2 : ffff80000abec000 [ 0.592327] x1 : 000000000000002f x0 : 0000800000000000 [ 0.597716] Call trace: [ 0.600232] xen_starting_cpu+0x160/0x180 [ 0.604309] cpuhp_invoke_callback+0xac/0x640 [ 0.608736] cpuhp_issue_call+0xf4/0x150 [ 0.612728] __cpuhp_setup_state_cpuslocked+0x128/0x2c8 [ 0.618030] __cpuhp_setup_state+0x84/0xf8 [ 0.622192] xen_guest_init+0x324/0x364 [ 0.626097] do_one_initcall+0x54/0x250 [ 0.630003] kernel_init_freeable+0x12c/0x2c8 [ 0.634428] kernel_init+0x1c/0x128 [ 0.637988] ret_from_fork+0x10/0x18 [ 0.641635] ---[ end trace d95b5309a33f8b27 ]--- [ 0.646337] ------------[ cut here ]------------ [ 0.651005] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:158! [ 0.657697] Internal error: Oops - BUG: 0 [#1] SMP [ 0.662548] Modules linked in: [ 0.665676] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.9.0-rc4+ #4 [ 0.673398] Hardware name: Socionext Developer Box (DT) [ 0.678695] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--) [ 0.684338] pc : xen_starting_cpu+0x178/0x180 [ 0.688765] lr : xen_starting_cpu+0x144/0x180 [ 0.693188] sp : ffff8000116cbb60 [ 0.696573] x29: ffff8000116cbb60 x28: ffff80000abec000 [ 0.701955] x27: 0000000000000000 x26: 0000000000000000 [ 0.707344] x25: ffff80001156c000 x24: fffffdffbfcdb600 [ 0.712718] x23: 0000000000000000 x22: 0000000000000000 [ 0.718107] x21: ffff8000113a99c8 x20: ffff800010fe4f68 [ 0.723481] x19: ffff8000113a9988 x18: 0000000000000010 [ 0.728863] x17: 0000000094fe0f81 x16: 00000000deadbeef [ 0.734245] x15: ffffffffffffffff x14: 0720072007200720 [ 0.739626] x13: 0720072007200720 x12: 0720072007200720 [ 0.745008] x11: 0720072007200720 x10: 0720072007200720 [ 0.750390] x9 : ffff8000100fbdc0 x8 : ffff800010715208 [ 0.755771] x7 : 0000000000000054 x6 : ffff00001b790f00 [ 0.761153] x5 : ffff800010bbf880 x4 : 0000000000000000 [ 0.766534] x3 : 0000000000000000 x2 : 00000000deadbeef [ 0.771916] x1 : 00000000deadbeef x0 : ffffffffffffffea [ 0.777304] Call trace: [ 0.779819] xen_starting_cpu+0x178/0x180 [ 0.783898] cpuhp_invoke_callback+0xac/0x640 [ 0.788325] cpuhp_issue_call+0xf4/0x150 [ 0.792317] __cpuhp_setup_state_cpuslocked+0x128/0x2c8 [ 0.797619] __cpuhp_setup_state+0x84/0xf8 [ 0.801779] xen_guest_init+0x324/0x364 [ 0.805683] do_one_initcall+0x54/0x250 [ 0.809590] kernel_init_freeable+0x12c/0x2c8 [ 0.814016] kernel_init+0x1c/0x128 [ 0.817583] ret_from_fork+0x10/0x18 [ 0.821226] Code: d0006980 f9427c00 cb000300 17ffffea (d4210000) [ 0.827415] ---[ end trace d95b5309a33f8b28 ]--- [ 0.832076] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.839815] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/160196697165.60224.17470743378683334995.stgit@devnote2 Signed-off-by: Juergen Gross <jgross@suse.com> | 07 October 2020, 05:08:43 UTC |
8481446 | Guo Ren | 06 October 2020, 16:49:33 UTC | riscv: Fixup bootup failure with HARDENED_USERCOPY 6184358da000 ("riscv: Fixup static_obj() fail") attempted to elide a lockdep failure by rearranging our kernel image to place all initdata within [_stext, _end], thus triggering lockdep to treat these as static objects. These objects are released and eventually reallocated, causing check_kernel_text_object() to trigger a BUG(). This backs out the change to make [_stext, _end] all-encompassing, instead just moving initdata. This results in initdata being outside of [__init_begin, __init_end], which means initdata can't be freed. Link: https://lore.kernel.org/linux-riscv/1593266228-61125-1-git-send-email-guoren@kernel.org/T/#t Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Reported-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: Aurelien Jarno <aurelien@aurel32.net> [Palmer: Clean up commit text] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> | 07 October 2020, 01:34:00 UTC |
c85fb28 | Linus Torvalds | 06 October 2020, 19:09:29 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Fix a kernel panic in the AES crypto code caused by a BR tail call not matching the target BTI instruction (when branch target identification is enabled)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: crypto: arm64: Use x16 with indirect branch to bti_c | 06 October 2020, 19:09:29 UTC |
6ec37e6 | Linus Torvalds | 06 October 2020, 19:00:52 UTC | Merge tag 'platform-drivers-x86-v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull another x86 platform driver fix from Hans de Goede: "One final pdx86 fix for Tablet Mode reporting regressions (which make the keyboard and touchpad unusable) on various Asus notebooks. These regressions were caused by the asus-nb-wmi and the intel-vbtn drivers both receiving recent patches to start reporting Tablet Mode / to report it on more models. Due to a miscommunication between Andy and me, Andy's earlier pull-req only contained the fix for the intel-vbtn driver and not the fix for the asus-nb-wmi code. This fix has been tested as a downstream patch in Fedora kernels for approx two weeks with no problems being reported" * tag 'platform-drivers-x86-v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: asus-wmi: Fix SW_TABLET_MODE always reporting 1 on many different models | 06 October 2020, 19:00:52 UTC |
f1e141e | Linus Torvalds | 06 October 2020, 18:05:44 UTC | Merge tag 'drm-fixes-2020-10-06-1' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Daniel queued these up last week and I took a long weekend so didn't get them out, but fixing the OOB access on get font seems like something we should land and it's cc'ed stable as well. The other big change is a partial revert for a regression on android on the clcd fbdev driver, and one other docs fix. fbdev: - Re-add FB_ARMCLCD for android - Fix global-out-of-bounds read in fbcon_get_font() core: - Small doc fix" * tag 'drm-fixes-2020-10-06-1' of git://anongit.freedesktop.org/drm/drm: drm: drm_dsc.h: fix a kernel-doc markup Partially revert "video: fbdev: amba-clcd: Retire elder CLCD driver" fbcon: Fix global-out-of-bounds read in fbcon_get_font() Fonts: Support FONT_EXTRA_WORDS macros for built-in fonts fbdev, newport_con: Move FONT_EXTRA_WORDS macros into linux/font.h | 06 October 2020, 18:05:44 UTC |
4013c14 | Linus Torvalds | 05 October 2020, 17:56:22 UTC | usermodehelper: reset umask to default before executing user process Kernel threads intentionally do CLONE_FS in order to follow any changes that 'init' does to set up the root directory (or cwd). It is admittedly a bit odd, but it avoids the situation where 'init' does some extensive setup to initialize the system environment, and then we execute a usermode helper program, and it uses the original FS setup from boot time that may be very limited and incomplete. [ Both Al Viro and Eric Biederman point out that 'pivot_root()' will follow the root regardless, since it fixes up other users of root (see chroot_fs_refs() for details), but overmounting root and doing a chroot() would not. ] However, Vegard Nossum noticed that the CLONE_FS not only means that we follow the root and current working directories, it also means we share umask with whatever init changed it to. That wasn't intentional. Just reset umask to the original default (0022) before actually starting the usermode helper program. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 06 October 2020, 17:31:52 UTC |
d1a819a | Linus Torvalds | 05 October 2020, 18:26:27 UTC | splice: teach splice pipe reading about empty pipe buffers Tetsuo Handa reports that splice() can return 0 before the real EOF, if the data in the splice source pipe is an empty pipe buffer. That empty pipe buffer case doesn't happen in any normal situation, but you can trigger it by doing a write to a pipe that fails due to a page fault. Tetsuo has a test-case to show the behavior: #define _GNU_SOURCE #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> int main(int argc, char *argv[]) { const int fd = open("/tmp/testfile", O_WRONLY | O_CREAT, 0600); int pipe_fd[2] = { -1, -1 }; pipe(pipe_fd); write(pipe_fd[1], NULL, 4096); /* This splice() should wait unless interrupted. */ return !splice(pipe_fd[0], NULL, fd, NULL, 65536, 0); } which results in write(5, NULL, 4096) = -1 EFAULT (Bad address) splice(4, NULL, 3, NULL, 65536, 0) = 0 and this can confuse splice() users into believing they have hit EOF prematurely. The issue was introduced when the pipe write code started pre-allocating the pipe buffers before copying data from user space. This is modified verion of Tetsuo's original patch. Fixes: a194dfe6e6f6 ("pipe: Rearrange sequence in pipe_write() to preallocate slot") Link:https://lore.kernel.org/linux-fsdevel/20201005121339.4063-1-penguin-kernel@I-love.SAKURA.ne.jp/ Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Acked-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 06 October 2020, 17:27:22 UTC |
39e4716 | Jeremy Linton | 06 October 2020, 16:33:26 UTC | crypto: arm64: Use x16 with indirect branch to bti_c The AES code uses a 'br x7' as part of a function called by a macro. That branch needs a bti_j as a target. This results in a panic as seen below. Using x16 (or x17) with an indirect branch keeps the target bti_c. Bad mode in Synchronous Abort handler detected on CPU1, code 0x34000003 -- BTI CPU: 1 PID: 265 Comm: cryptomgr_test Not tainted 5.8.11-300.fc33.aarch64 #1 pstate: 20400c05 (nzCv daif +PAN -UAO BTYPE=j-) pc : aesbs_encrypt8+0x0/0x5f0 [aes_neon_bs] lr : aesbs_xts_encrypt+0x48/0xe0 [aes_neon_bs] sp : ffff80001052b730 aesbs_encrypt8+0x0/0x5f0 [aes_neon_bs] __xts_crypt+0xb0/0x2dc [aes_neon_bs] xts_encrypt+0x28/0x3c [aes_neon_bs] crypto_skcipher_encrypt+0x50/0x84 simd_skcipher_encrypt+0xc8/0xe0 crypto_skcipher_encrypt+0x50/0x84 test_skcipher_vec_cfg+0x224/0x5f0 test_skcipher+0xbc/0x120 alg_test_skcipher+0xa0/0x1b0 alg_test+0x3dc/0x47c cryptomgr_test+0x38/0x60 Fixes: 0e89640b640d ("crypto: arm64 - Use modern annotations for assembly functions") Cc: <stable@vger.kernel.org> # 5.6.x- Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Suggested-by: Dave P Martin <Dave.Martin@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20201006163326.2780619-1-jeremy.linton@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 06 October 2020, 17:14:47 UTC |
d91dc43 | David S. Miller | 06 October 2020, 13:18:20 UTC | Merge tag 'rxrpc-fixes-20201005' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Miscellaneous fixes Here are some miscellaneous rxrpc fixes: (1) Fix the xdr encoding of the contents read from an rxrpc key. (2) Fix a BUG() for a unsupported encoding type. (3) Fix missing _bh lock annotations. (4) Fix acceptance handling for an incoming call where the incoming call is encrypted. (5) The server token keyring isn't network namespaced - it belongs to the server, so there's no need. Namespacing it means that request_key() fails to find it. (6) Fix a leak of the server keyring. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 06 October 2020, 13:18:20 UTC |
86bccd0 | Eric Dumazet | 05 October 2020, 13:48:13 UTC | tcp: fix receive window update in tcp_add_backlog() We got reports from GKE customers flows being reset by netfilter conntrack unless nf_conntrack_tcp_be_liberal is set to 1. Traces seemed to suggest ACK packet being dropped by the packet capture, or more likely that ACK were received in the wrong order. wscale=7, SYN and SYNACK not shown here. This ACK allows the sender to send 1871*128 bytes from seq 51359321 : New right edge of the window -> 51359321+1871*128=51598809 09:17:23.389210 IP A > B: Flags [.], ack 51359321, win 1871, options [nop,nop,TS val 10 ecr 999], length 0 09:17:23.389212 IP B > A: Flags [.], seq 51422681:51424089, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 1408 09:17:23.389214 IP A > B: Flags [.], ack 51422681, win 1376, options [nop,nop,TS val 10 ecr 999], length 0 09:17:23.389253 IP B > A: Flags [.], seq 51424089:51488857, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 64768 09:17:23.389272 IP A > B: Flags [.], ack 51488857, win 859, options [nop,nop,TS val 10 ecr 999], length 0 09:17:23.389275 IP B > A: Flags [.], seq 51488857:51521241, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 32384 Receiver now allows to send 606*128=77568 from seq 51521241 : New right edge of the window -> 51521241+606*128=51598809 09:17:23.389296 IP A > B: Flags [.], ack 51521241, win 606, options [nop,nop,TS val 10 ecr 999], length 0 09:17:23.389308 IP B > A: Flags [.], seq 51521241:51553625, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 32384 It seems the sender exceeds RWIN allowance, since 51611353 > 51598809 09:17:23.389346 IP B > A: Flags [.], seq 51553625:51611353, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 57728 09:17:23.389356 IP B > A: Flags [.], seq 51611353:51618393, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 7040 09:17:23.389367 IP A > B: Flags [.], ack 51611353, win 0, options [nop,nop,TS val 10 ecr 999], length 0 netfilter conntrack is not happy and sends RST 09:17:23.389389 IP A > B: Flags [R], seq 92176528, win 0, length 0 09:17:23.389488 IP B > A: Flags [R], seq 174478967, win 0, length 0 Now imagine ACK were delivered out of order and tcp_add_backlog() sets window based on wrong packet. New right edge of the window -> 51521241+859*128=51631193 Normally TCP stack handles OOO packets just fine, but it turns out tcp_add_backlog() does not. It can update the window field of the aggregated packet even if the ACK sequence of the last received packet is too old. Many thanks to Alexandre Ferrieux for independently reporting the issue and suggesting a fix. Fixes: 4f693b55c3d2 ("tcp: implement coalescing on backlog queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 October 2020, 13:11:58 UTC |
f45a424 | Anant Thazhemadam | 05 October 2020, 13:29:58 UTC | net: usb: rtl8150: set random MAC address when set_ethernet_addr() fails When get_registers() fails in set_ethernet_addr(),the uninitialized value of node_id gets copied over as the address. So, check the return value of get_registers(). If get_registers() executed successfully (i.e., it returns sizeof(node_id)), copy over the MAC address using ether_addr_copy() (instead of using memcpy()). Else, if get_registers() failed instead, a randomly generated MAC address is set as the MAC address instead. Reported-by: syzbot+abbc768b560c84d92fd3@syzkaller.appspotmail.com Tested-by: syzbot+abbc768b560c84d92fd3@syzkaller.appspotmail.com Acked-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 October 2020, 13:10:21 UTC |
017512a | Paolo Abeni | 05 October 2020, 10:01:06 UTC | mptcp: more DATA FIN fixes Currently data fin on data packet are not handled properly: the 'rcv_data_fin_seq' field is interpreted as the last sequence number carrying a valid data, but for data fin packet with valid maps we currently store map_seq + map_len, that is, the next value. The 'write_seq' fields carries instead the value subseguent to the last valid byte, so in mptcp_write_data_fin() we never detect correctly the last DSS map. Fixes: 7279da6145bb ("mptcp: Use MPTCP-level flag for sending DATA_FIN") Fixes: 1a49b2c2a501 ("mptcp: Handle incoming 32-bit DATA_FIN values") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 October 2020, 13:06:59 UTC |
c88c5ed | David S. Miller | 06 October 2020, 13:05:47 UTC | Merge branch 'Fix-tail-dropping-watermarks-for-Ocelot-switches' Vladimir Oltean says: ==================== Fix tail dropping watermarks for Ocelot switches This series adds a missing division by 60, and a warning to prevent that in the future. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 06 October 2020, 13:05:47 UTC |
0132649 | Vladimir Oltean | 05 October 2020, 09:09:12 UTC | net: mscc: ocelot: warn when encoding an out-of-bounds watermark value There is an upper bound to the value that a watermark may hold. That upper bound is not immediately obvious during configuration, and it might be possible to have accidental truncation. Actually this has happened already, add a warning to prevent it from happening again. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 October 2020, 13:05:47 UTC |
601e984 | Vladimir Oltean | 05 October 2020, 09:09:11 UTC | net: mscc: ocelot: divide watermark value by 60 when writing to SYS_ATOP Tail dropping is enabled for a port when: 1. A source port consumes more packet buffers than the watermark encoded in SYS:PORT:ATOP_CFG.ATOP. AND 2. Total memory use exceeds the consumption watermark encoded in SYS:PAUSE_CFG:ATOP_TOT_CFG. The unit of these watermarks is a 60 byte memory cell. That unit is programmed properly into ATOP_TOT_CFG, but not into ATOP. Actually when written into ATOP, it would get truncated and wrap around. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 October 2020, 13:05:47 UTC |
082bb94 | Manivannan Sadhasivam | 05 October 2020, 07:16:42 UTC | net: qrtr: ns: Fix the incorrect usage of rcu_read_lock() The rcu_read_lock() is not supposed to lock the kernel_sendmsg() API since it has the lock_sock() in qrtr_sendmsg() which will sleep. Hence, fix it by excluding the locking for kernel_sendmsg(). While at it, let's also use radix_tree_deref_retry() to confirm the validity of the pointer returned by radix_tree_deref_slot() and use radix_tree_iter_resume() to resume iterating the tree properly before releasing the lock as suggested by Doug. Fixes: a7809ff90ce6 ("net: qrtr: ns: Protect radix_tree_deref_slot() using rcu read locks") Reported-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Alex Elder <elder@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 October 2020, 13:01:35 UTC |
1797d58 | Hans de Goede | 16 September 2020, 14:14:39 UTC | platform/x86: asus-wmi: Fix SW_TABLET_MODE always reporting 1 on many different models Commit b0dbd97de1f1 ("platform/x86: asus-wmi: Add support for SW_TABLET_MODE") added support for reporting SW_TABLET_MODE using the Asus 0x00120063 WMI-device-id to see if various transformer models were docked into their keyboard-dock (SW_TABLET_MODE=0) or if they were being used as a tablet. The new SW_TABLET_MODE support (naively?) assumed that non Transformer devices would either not support the 0x00120063 WMI-device-id at all, or would NOT set ASUS_WMI_DSTS_PRESENCE_BIT in their reply when querying the device-id. Unfortunately this is not true and we have received many bug reports about this change causing the asus-wmi driver to always report SW_TABLET_MODE=1 on non Transformer devices. This causes libinput to think that these are 360 degree hinges style 2-in-1s folded into tablet-mode. Making libinput suppress keyboard and touchpad events from the builtin keyboard and touchpad. So effectively this causes the keyboard and touchpad to not work on many non Transformer Asus models. This commit fixes this by using the existing DMI based quirk mechanism in asus-nb-wmi.c to allow using the 0x00120063 device-id for reporting SW_TABLET_MODE on Transformer models and ignoring it on all other models. Fixes: b0dbd97de1f1 ("platform/x86: asus-wmi: Add support for SW_TABLET_MODE") Link: https://patchwork.kernel.org/patch/11780901/ BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209011 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1876997 Reported-by: Samuel Čavoj <samuel@cavoj.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 06 October 2020, 07:48:05 UTC |
86fdf61 | Dave Airlie | 06 October 2020, 02:34:58 UTC | Merge tag 'drm-misc-fixes-2020-10-01' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.9: - Small doc fix. - Re-add FB_ARMCLCD for android. - Fix global-out-of-bounds read in fbcon_get_font(). Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8585daa2-fcbc-3924-ac4f-e7b5668808e0@linux.intel.com | 06 October 2020, 02:38:28 UTC |
7575fdd | Linus Torvalds | 05 October 2020, 18:54:20 UTC | Merge tag 'platform-drivers-x86-v5.9-2' of git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Andy Shevchenko: "We have some fixes for Tablet Mode reporting in particular, that users are complaining a lot about. Summary: - Attempt #3 of enabling Tablet Mode reporting w/o regressions - Improve battery recognition code in ASUS WMI driver - Fix Kconfig dependency warning for Fujitsu and LG laptop drivers - Add fixes in Thinkpad ACPI driver for _BCL method and NVRAM polling - Fix power supply extended topology in Mellanox driver - Fix memory leak in OLPC EC driver - Avoid static struct device in Intel PMC core driver - Add support for the touchscreen found in MPMAN Converter9 2-in-1 - Update MAINTAINERS to reflect the real state of affairs" * tag 'platform-drivers-x86-v5.9-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: thinkpad_acpi: re-initialize ACPI buffer size when reuse MAINTAINERS: Add Mark Gross and Hans de Goede as x86 platform drivers maintainers platform/x86: intel-vbtn: Switch to an allow-list for SW_TABLET_MODE reporting platform/x86: intel-vbtn: Revert "Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360" platform/x86: intel_pmc_core: do not create a static struct device platform/x86: mlx-platform: Fix extended topology configuration for power supply units platform/x86: pcengines-apuv2: Fix typo on define of AMD_FCH_GPIO_REG_GPIO55_DEVSLP0 platform/x86: fix kconfig dependency warning for FUJITSU_LAPTOP platform/x86: fix kconfig dependency warning for LG_LAPTOP platform/x86: thinkpad_acpi: initialize tp_nvram_state variable platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360 platform/x86: asus-wmi: Add BATC battery name to the list of supported platform/x86: asus-nb-wmi: Revert "Do not load on Asus T100TA and T200TA" platform/x86: touchscreen_dmi: Add info for the MPMAN Converter9 2-in-1 Documentation: laptops: thinkpad-acpi: fix underline length build warning Platform: OLPC: Fix memleak in olpc_ec_probe | 05 October 2020, 18:54:20 UTC |
165563c | Linus Torvalds | 05 October 2020, 18:27:14 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from David Miller: 1) Make sure SKB control block is in the proper state during IPSEC ESP-in-TCP encapsulation. From Sabrina Dubroca. 2) Various kinds of attributes were not being cloned properly when we build new xfrm_state objects from existing ones. Fix from Antony Antony. 3) Make sure to keep BTF sections, from Tony Ambardar. 4) TX DMA channels need proper locking in lantiq driver, from Hauke Mehrtens. 5) Honour route MTU during forwarding, always. From Maciej Żenczykowski. 6) Fix races in kTLS which can result in crashes, from Rohit Maheshwari. 7) Skip TCP DSACKs with rediculous sequence ranges, from Priyaranjan Jha. 8) Use correct address family in xfrm state lookups, from Herbert Xu. 9) A bridge FDB flush should not clear out user managed fdb entries with the ext_learn flag set, from Nikolay Aleksandrov. 10) Fix nested locking of netdev address lists, from Taehee Yoo. 11) Fix handling of 32-bit DATA_FIN values in mptcp, from Mat Martineau. 12) Fix r8169 data corruptions on RTL8402 chips, from Heiner Kallweit. 13) Don't free command entries in mlx5 while comp handler could still be running, from Eran Ben Elisha. 14) Error flow of request_irq() in mlx5 is busted, due to an off by one we try to free and IRQ never allocated. From Maor Gottlieb. 15) Fix leak when dumping netlink policies, from Johannes Berg. 16) Sendpage cannot be performed when a page is a slab page, or the page count is < 1. Some subsystems such as nvme were doing so. Create a "sendpage_ok()" helper and use it as needed, from Coly Li. 17) Don't leak request socket when using syncookes with mptcp, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits) net/core: check length before updating Ethertype in skb_mpls_{push,pop} net: mvneta: fix double free of txq->buf net_sched: check error pointer in tcf_dump_walker() net: team: fix memory leak in __team_options_register net: typhoon: Fix a typo Typoon --> Typhoon net: hinic: fix DEVLINK build errors net: stmmac: Modify configuration method of EEE timers tcp: fix syn cookied MPTCP request socket leak libceph: use sendpage_ok() in ceph_tcp_sendpage() scsi: libiscsi: use sendpage_ok() in iscsi_tcp_segment_map() drbd: code cleanup by using sendpage_ok() to check page for kernel_sendpage() tcp: use sendpage_ok() to detect misused .sendpage nvme-tcp: check page by sendpage_ok() before calling kernel_sendpage() net: add WARN_ONCE in kernel_sendpage() for improper zero-copy send net: introduce helper sendpage_ok() in include/linux/net.h net: usb: pegasus: Proper error handing when setting pegasus' MAC address net: core: document two new elements of struct net_device netlink: fix policy dump leak net/mlx5e: Fix race condition on nhe->n pointer in neigh update net/mlx5e: Fix VLAN create flow ... | 05 October 2020, 18:27:14 UTC |
38b1dc4 | David Howells | 02 October 2020, 13:04:51 UTC | rxrpc: Fix server keyring leak If someone calls setsockopt() twice to set a server key keyring, the first keyring is leaked. Fix it to return an error instead if the server key keyring is already set. Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com> | 05 October 2020, 16:09:22 UTC |
fea9911 | David Howells | 30 September 2020, 18:52:08 UTC | rxrpc: The server keyring isn't network-namespaced The keyring containing the server's tokens isn't network-namespaced, so it shouldn't be looked up with a network namespace. It is expected to be owned specifically by the server, so namespacing is unnecessary. Fixes: a58946c158a0 ("keys: Pass the network namespace into request_key mechanism") Signed-off-by: David Howells <dhowells@redhat.com> | 05 October 2020, 15:36:06 UTC |
2d914c1 | David Howells | 30 September 2020, 20:27:18 UTC | rxrpc: Fix accept on a connection that need securing When a new incoming call arrives at an userspace rxrpc socket on a new connection that has a security class set, the code currently pushes it onto the accept queue to hold a ref on it for the socket. This doesn't work, however, as recvmsg() pops it off, notices that it's in the SERVER_SECURING state and discards the ref. This means that the call runs out of refs too early and the kernel oopses. By contrast, a kernel rxrpc socket manually pre-charges the incoming call pool with calls that already have user call IDs assigned, so they are ref'd by the call tree on the socket. Change the mode of operation for userspace rxrpc server sockets to work like this too. Although this is a UAPI change, server sockets aren't currently functional. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: David Howells <dhowells@redhat.com> | 05 October 2020, 15:35:57 UTC |
fa1d113 | David Howells | 01 October 2020, 10:57:40 UTC | rxrpc: Fix some missing _bh annotations on locking conn->state_lock conn->state_lock may be taken in softirq mode, but a previous patch replaced an outer lock in the response-packet event handling code, and lost the _bh from that when doing so. Fix this by applying the _bh annotation to the state_lock locking. Fixes: a1399f8bb033 ("rxrpc: Call channels should have separate call number spaces") Signed-off-by: David Howells <dhowells@redhat.com> | 05 October 2020, 15:34:32 UTC |
9a059cd | David Howells | 08 September 2020, 21:09:04 UTC | rxrpc: Downgrade the BUG() for unsupported token type in rxrpc_read() If rxrpc_read() (which allows KEYCTL_READ to read a key), sees a token of a type it doesn't recognise, it can BUG in a couple of places, which is unnecessary as it can easily get back to userspace. Fix this to print an error message instead. Fixes: 99455153d067 ("RxRPC: Parse security index 5 keys (Kerberos 5)") Signed-off-by: David Howells <dhowells@redhat.com> | 05 October 2020, 15:33:37 UTC |
5630511 | Marc Dionne | 04 September 2020, 17:01:24 UTC | rxrpc: Fix rxkad token xdr encoding The session key should be encoded with just the 8 data bytes and no length; ENCODE_DATA precedes it with a 4 byte length, which confuses some existing tools that try to parse this format. Add an ENCODE_BYTES macro that does not include a length, and use it for the key. Also adjust the expected length. Note that commit 774521f353e1d ("rxrpc: Fix an assertion in rxrpc_read()") had fixed a BUG by changing the length rather than fixing the encoding. The original length was correct. Fixes: 99455153d067 ("RxRPC: Parse security index 5 keys (Kerberos 5)") Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> | 05 October 2020, 15:33:28 UTC |
1c33524 | Serge Semin | 02 October 2020, 21:16:47 UTC | MAINTAINERS: Add maintainer of DW APB SSI driver Add myself as a maintainer of the Synopsis DesignWare APB SSI driver. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201002211648.24320-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org> | 05 October 2020, 12:22:59 UTC |
720ef73 | Aaron Ma | 02 October 2020, 17:09:16 UTC | platform/x86: thinkpad_acpi: re-initialize ACPI buffer size when reuse Evaluating ACPI _BCL could fail, then ACPI buffer size will be set to 0. When reuse this ACPI buffer, AE_BUFFER_OVERFLOW will be triggered. Re-initialize buffer size will make ACPI evaluate successfully. Fixes: 46445b6b896fd ("thinkpad-acpi: fix handle locate for video and query of _BCL") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> | 05 October 2020, 09:20:42 UTC |
a78c6f5 | Atish Patra | 01 October 2020, 19:04:56 UTC | RISC-V: Make sure memblock reserves the memory containing DT Currently, the memory containing DT is not reserved. Thus, that region of memory can be reallocated or reused for other purposes. This may result in corrupted DT for nommu virt board in Qemu. We may not face any issue in kendryte as DT is embedded in the kernel image for that. Fixes: 6bd33e1ece52 ("riscv: add nommu support") Cc: stable@vger.kernel.org Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> | 04 October 2020, 23:19:28 UTC |
549738f | Linus Torvalds | 04 October 2020, 23:04:34 UTC | Linux 5.9-rc8 | 04 October 2020, 23:04:34 UTC |
4296adc | Guillaume Nault | 02 October 2020, 19:53:08 UTC | net/core: check length before updating Ethertype in skb_mpls_{push,pop} Openvswitch allows to drop a packet's Ethernet header, therefore skb_mpls_push() and skb_mpls_pop() might be called with ethernet=true and mac_len=0. In that case the pointer passed to skb_mod_eth_type() doesn't point to an Ethernet header and the new Ethertype is written at unexpected locations. Fix this by verifying that mac_len is big enough to contain an Ethernet header. Fixes: fa4e0f8855fc ("net/sched: fix corrupted L2 header with MPLS 'push' and 'pop' actions") Signed-off-by: Guillaume Nault <gnault@redhat.com> Acked-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 04 October 2020, 22:09:26 UTC |
f4544e5 | Tom Rix | 03 October 2020, 18:51:21 UTC | net: mvneta: fix double free of txq->buf clang static analysis reports this problem: drivers/net/ethernet/marvell/mvneta.c:3465:2: warning: Attempt to free released memory kfree(txq->buf); ^~~~~~~~~~~~~~~ When mvneta_txq_sw_init() fails to alloc txq->tso_hdrs, it frees without poisoning txq->buf. The error is caught in the mvneta_setup_txqs() caller which handles the error by cleaning up all of the txqs with a call to mvneta_txq_sw_deinit which also frees txq->buf. Since mvneta_txq_sw_deinit is a general cleaner, all of the partial cleaning in mvneta_txq_sw_deinit()'s error handling is not needed. Fixes: 2adb719d74f6 ("net: mvneta: Implement software TSO") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 04 October 2020, 22:07:19 UTC |
580e427 | Cong Wang | 02 October 2020, 19:13:34 UTC | net_sched: check error pointer in tcf_dump_walker() Although we take RTNL on dump path, it is possible to skip RTNL on insertion path. So the following race condition is possible: rtnl_lock() // no rtnl lock mutex_lock(&idrinfo->lock); // insert ERR_PTR(-EBUSY) mutex_unlock(&idrinfo->lock); tc_dump_action() rtnl_unlock() So we have to skip those temporary -EBUSY entries on dump path too. Reported-and-tested-by: syzbot+b47bc4f247856fb4d9e1@syzkaller.appspotmail.com Fixes: 0fedc63fadf0 ("net_sched: commit action insertions together") Cc: Vlad Buslov <vladbu@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 04 October 2020, 21:53:06 UTC |
9a9e774 | Anant Thazhemadam | 04 October 2020, 20:55:36 UTC | net: team: fix memory leak in __team_options_register The variable "i" isn't initialized back correctly after the first loop under the label inst_rollback gets executed. The value of "i" is assigned to be option_count - 1, and the ensuing loop (under alloc_rollback) begins by initializing i--. Thus, the value of i when the loop begins execution will now become i = option_count - 2. Thus, when kfree(dst_opts[i]) is called in the second loop in this order, (i.e., inst_rollback followed by alloc_rollback), dst_optsp[option_count - 2] is the first element freed, and dst_opts[option_count - 1] does not get freed, and thus, a memory leak is caused. This memory leak can be fixed, by assigning i = option_count (instead of option_count - 1). Fixes: 80f7c6683fe0 ("team: add support for per-port options") Reported-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com Tested-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 04 October 2020, 21:47:22 UTC |
7ed9e3d | Si-Wei Liu | 03 October 2020, 05:02:10 UTC | vhost-vdpa: fix page pinning leakage in error path Pinned pages are not properly accounted particularly when mapping error occurs on IOTLB update. Clean up dangling pinned pages for the error path. As the inflight pinned pages, specifically for memory region that strides across multiple chunks, would need more than one free page for book keeping and accounting. For simplicity, pin pages for all memory in the IOVA range in one go rather than have multiple pin_user_pages calls to make up the entire region. This way it's easier to track and account the pages already mapped, particularly for clean-up in the error path. Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Link: https://lore.kernel.org/r/1601701330-16837-3-git-send-email-si-wei.liu@oracle.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 04 October 2020, 07:47:02 UTC |
1477c8a | Si-Wei Liu | 03 October 2020, 05:02:09 UTC | vhost-vdpa: fix vhost_vdpa_map() on error condition vhost_vdpa_map() should remove the iotlb entry just added if the corresponding mapping fails to set up properly. Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Link: https://lore.kernel.org/r/1601701330-16837-2-git-send-email-si-wei.liu@oracle.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 04 October 2020, 07:47:02 UTC |
ab51225 | Greg Kurz | 03 October 2020, 10:02:13 UTC | vhost: Don't call log_access_ok() when using IOTLB When the IOTLB device is enabled, the log_guest_addr that is passed by userspace to the VHOST_SET_VRING_ADDR ioctl, and which is then written to vq->log_addr, is a GIOVA. All writes to this address are translated by log_user() to writes to an HVA, and then ultimately logged through the corresponding GPAs in log_write_hva(). No logging will ever occur with vq->log_addr in this case. It is thus wrong to pass vq->log_addr and log_guest_addr to log_access_vq() which assumes they are actual GPAs. Introduce a new vq_log_used_access_ok() helper that only checks accesses to the log for the used structure when there isn't an IOTLB device around. Signed-off-by: Greg Kurz <groug@kaod.org> Link: https://lore.kernel.org/r/160171933385.284610.10189082586063280867.stgit@bahia.lan Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 04 October 2020, 07:45:20 UTC |
71878fa | Greg Kurz | 03 October 2020, 10:02:03 UTC | vhost: Use vhost_get_used_size() in vhost_vring_set_addr() The open-coded computation of the used size doesn't take the event into account when the VIRTIO_RING_F_EVENT_IDX feature is present. Fix that by using vhost_get_used_size(). Fixes: 8ea8cf89e19a ("vhost: support event index") Cc: stable@vger.kernel.org Signed-off-by: Greg Kurz <groug@kaod.org> Link: https://lore.kernel.org/r/160171932300.284610.11846106312938909461.stgit@bahia.lan Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 04 October 2020, 07:44:25 UTC |
0210a8d | Greg Kurz | 03 October 2020, 10:01:52 UTC | vhost: Don't call access_ok() when using IOTLB When the IOTLB device is enabled, the vring addresses we get from userspace are GIOVAs. It is thus wrong to pass them down to access_ok() which only takes HVAs. Access validation is done at prefetch time with IOTLB. Teach vq_access_ok() about that by moving the (vq->iotlb) check from vhost_vq_access_ok() to vq_access_ok(). This prevents vhost_vring_set_addr() to fail when verifying the accesses. No behavior change for vhost_vq_access_ok(). BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1883084 Fixes: 6b1e6cc7855b ("vhost: new device IOTLB API") Cc: jasowang@redhat.com CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Greg Kurz <groug@kaod.org> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/160171931213.284610.2052489816407219136.stgit@bahia.lan Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 04 October 2020, 07:43:03 UTC |