Skip to main content

Browse the archive

swh:1:snp:38ae39f9fd01a4b0ef06fab5668b65bf4c2aca03
sort by:
Revision Author Date Message Commit Date
0723d4a FUJITA Tomonori 09 October 2008, 02:25:42 UTC [SCSI] 3w-xxxx: remove unnecessary local_irq_save/restore for scsi sg copy API Since the commit 50bed2e2862a8f3a4f7d683d0d27292e71ef18b9 (sg: disable interrupts inside sg_copy_buffer), no need to disable interrupts before calling scsi_sg_copy_from_buffer. So we can simplify tw_transfer_internal, which disables interrupts just for scsi_sg_copy_from_buffer. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>\ Acked-by: Adam Radford <linuxraid@amcc.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:17 UTC
aa198bf Randy Dunlap 13 October 2008, 16:15:09 UTC [SCSI] fix netlink kernel-doc Fix kernel-doc warning: the function short description must be on one line and the previous comment is not kernel-doc but it was confusing scripts/kernel-doc. Warning(lin2627-g3-kdocfixes//drivers/scsi/scsi_netlink.c:221): No description found for parameter 'skb' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:17 UTC
10dab22 Jamie Wellnitz 12 September 2008, 01:39:36 UTC [SCSI] sd: Fix handling of NO_SENSE check condition The current handling of NO_SENSE check condition is the same as RECOVERED_ERROR, and assumes that in both cases, the I/O was fully transferred. We have seen cases of arrays returning with NO_SENSE (no error), but the I/O was not completely transferred, thus residual set. Thus, rather than return good_bytes as the entire transfer, set good_bytes to 0, so that the midlayer then applies the residual in calculating the transfer, and for sd, will fail the I/O and fall into a retry path. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:17 UTC
6c5121b Kiyoshi Ueda 04 October 2008, 18:11:35 UTC [SCSI] export busy state via q->lld_busy_fn() This patch implements q->lld_busy_fn() for scsi mid layer to export its busy state for request stacking drivers. For efficiency, no lock is taken to check the busy state of shost/starget/sdev, since the returned value is not guaranteed and may be changed after request stacking drivers call the function, regardless of taking lock or not. When scsi can't dispatch I/Os anymore and needs to kill I/Os (e.g. !sdev), scsi needs to return 'not busy'. Otherwise, request stacking drivers may hold requests forever. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:16 UTC
9d11251 Kiyoshi Ueda 04 October 2008, 18:11:06 UTC [SCSI] refactor sdev/starget/shost busy checking This patch refactors the busy checking codes of scsi_device, Scsi_Host and scsi_target. There should be no functional change. This is a preparation for another patch which exports scsi's busy state to the block layer for request stacking drivers. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:16 UTC
22ab019 Bernd Schubert 23 September 2008, 13:28:58 UTC [SCSI] mptfusion: Increase scsi-timeouts, similariy to the LSI 4.x driver. Make SPI timeout 10s the same as SAS Signed-off-by: Bernd Schubert <bs@q-leap.de> Acked-by: "Prakash, Sathya" <Sathya.Prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:16 UTC
7583221 thomas schorpp 03 October 2008, 21:45:29 UTC [SCSI] aic7xxx: Take the LED out of diagnostic mode on PM resume Take the Diag/Activity-LED of the HBA out of diagnostic mode on PM resume after successful PM resume from standby and HBA restart, it remained always on before. If something fails before complete recovery, it should remain on, since it is a diagnostics LED, reason for the used higher layer for the clear. Signed-off-by: thomas.schorpp@gmail.com Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:16 UTC
d91ab4e Alan Cox 23 September 2008, 16:26:30 UTC [SCSI] aic79xx: user visible misuse wrong SI units (not disk size!) MHZ not Mhz for SI unit pedants Closes bug #6422 Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:15 UTC
d777aaf Akinobu Mita 22 September 2008, 21:56:47 UTC [SCSI] ipr: use memory_read_from_buffer() Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:15 UTC
3ba7f18 Harvey Harrison 22 September 2008, 21:56:46 UTC [SCSI] aic79xx: fix shadowed variables OK to just reuse the outer declaration as it is never used again. drivers/scsi/aic7xxx/aic79xx_pci.c:340:12: warning: symbol 'devconfig' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_pci.c:299:12: originally declared here targpcistat is always assigned just before use, remove the inner declaration. drivers/scsi/aic7xxx/aic79xx_pci.c:486:9: warning: symbol 'targpcistat' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_pci.c:429:9: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:15 UTC
678e80a Harvey Harrison 22 September 2008, 21:56:45 UTC [SCSI] aic79xx: fix shadowed variables, add statics Redeclared within different if/else blocks, safe to reuse the original from beginning of function. drivers/scsi/aic7xxx/aic79xx_core.c:2475:10: warning: symbol 'scbid' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_core.c:2399:10: originally declared here drivers/scsi/aic7xxx/aic79xx_core.c:2586:10: warning: symbol 'scbid' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_core.c:2399:10: originally declared here drivers/scsi/aic7xxx/aic79xx_core.c:2587:15: warning: symbol 'scb' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_core.c:2393:13: originally declared here Use caminfo for the outer declaration, the redeclared version is iterating over all initiator/target pairs (devices) which. drivers/scsi/aic7xxx/aic79xx_core.c:8857:23: warning: symbol 'devinfo' shadows an earlier one drivers/scsi/aic7xxx/aic79xx_core.c:8711:21: originally declared here Forward declaration was already marked static, make the definition match. drivers/scsi/aic7xxx/aic79xx_core.c:3693:1: warning: symbol 'ahd_devlimited_syncrate' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:13 UTC
060ae85 Denys Vlasenko 22 September 2008, 21:56:42 UTC [SCSI] aic7xxx: update *_shipped files Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:12 UTC
7b61ab8 Denys Vlasenko 22 September 2008, 21:56:41 UTC [SCSI] aic7xxx: update .reg files Update .reg files, marking unused registers with dont_generate_debug_code. Comment explains how to use it. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:12 UTC
fa25b99 Denys Vlasenko 22 September 2008, 21:56:40 UTC [SCSI] aic7xxx: introduce "dont_generate_debug_code" keyword in aicasm parser aic7xxx still contains ~30kb of dead code if pretty printing of registers is requested. These patches deal with it. Size differences: text data bss dec hex filename DEBUG_ENABLE+PRETTY_PRINT: 234697 2362 1188 238247 3a2a7 linux-2.6.26-rc8-/drivers/scsi/aic7xxx/built-in.o 205092 2362 1188 208642 32f02 linux-2.6.26-rc8/drivers/scsi/aic7xxx/built-in.o NO_DEBUG_ENABLE+PRETTY_PRINT: 227272 2362 1172 230806 38596 linux-2.6.26-rc8-/drivers/scsi/aic7xxx/built-in.o 197671 2362 1172 201205 311f5 linux-2.6.26-rc8/drivers/scsi/aic7xxx/built-in.o DEBUG_ENABLE+NO_PRETTY_PRINT: 192457 2362 1188 196007 2fda7 linux-2.6.26-rc8-/drivers/scsi/aic7xxx/built-in.o 192457 2362 1188 196007 2fda7 linux-2.6.26-rc8/drivers/scsi/aic7xxx/built-in.o NO_DEBUG_ENABLE+NO_PRETTY_PRINT: 185040 2362 1172 188574 2e09e linux-2.6.26-rc8-/drivers/scsi/aic7xxx/built-in.o 185040 2362 1172 188574 2e09e linux-2.6.26-rc8/drivers/scsi/aic7xxx/built-in.o This patch: Introduce "dont_generate_debug_code" keyword in aicasm parser. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:12 UTC
5a36756 Chandra Seetharaman 22 August 2008, 06:12:40 UTC [SCSI] scsi_dh: Initialize path state to be passive when path is not owned Set the path state to be passive when we learn that the controller does not own the path to the LUN. This will avoid sending even a single i/o thru the passive path at the probe time. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:42:11 UTC
32c356d James Bottomley 19 August 2008, 22:58:13 UTC [SCSI] fix removable device inability to detect disk changes On Tue, 12 Aug 2008 15:08:14 +0200 Giuliano Pochini <pochini@shiny.it> wrote: > Fujitsu magneto-optical drive, Adaptec 29160 and > Linux Jay 2.6.26 #7 SMP Sun Aug 10 18:34:22 CEST 2008 ppc 7455, altivec supported PowerMac3,6 GNU/Linux > > When I insert a disk and I mount it, scsi_test_unit_ready() is called and > the do-while loop gets sshdr->sense_key == UNIT_ATTENTION in the first > cycle and 0 in the second one. So the if below misses the UNIT_ATTENTION > and sdev->changed = 1 is not executed. At this point bad things can > happen... I'm not sure how to fix this. Any clue ? The problem is essentially caused by us eating UNIT_ATTENTION conditions in scsi_test_unit_ready(). Fix by updating the ->changed flag when this happens if the media is removable. [pochini@shiny.it: updates to tidy up patch] Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 23 October 2008, 16:41:16 UTC
26e9a39 Linus Torvalds 17 October 2008, 16:50:12 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (25 commits) staging: at76_usb wireless driver Staging: workaround build system bug Staging: Lindent sxg.c Staging: SLICOSS: Call pci_release_regions at driver exit Staging: SLICOSS: Fix remaining type names Staging: SLICOSS: Fix warnings due to static usage Staging: SLICOSS: lots of checkpatch fixes Staging: go7007 v4l fixes Staging: Fix gcc warnings in sxg Staging: add echo cancelation module Staging: add wlan-ng prism2 usb driver Staging: add w35und wifi driver Staging: USB/IP: add host driver Staging: USB/IP: add client driver Staging: USB/IP: add common functions needed Staging: add the go7007 video driver Staging: add me4000 pci data collection driver Staging: add me4000 firmware files Staging: add sxg network driver Staging: add Alacritech slicoss network driver ... Fixed up conflicts due to taint flags changes and MAINTAINERS cleanup in MAINTAINERS, include/linux/kernel.h and kernel/panic.c. 17 October 2008, 16:50:12 UTC
bdbf0ac Linus Torvalds 17 October 2008, 16:33:39 UTC Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6 * 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (47 commits) hwmon: (adm1026) Prevent log spamming hwmon: (adm1026) Fix debug messages hwmon: (adm1029) Use mask for fan_div value hwmon: (adt7470) Add documentation hwmon: (ibmaem) Automatically load on IBM systems via DMI hwmon: (ibmpex) Automatically load on IBM systems via DMI hwmon: (w83781d) Use new style driver binding hwmon: (w83781d) Stop abusing struct i2c_client for ISA devices hwmon: (w83781d) Make ISA interface depend on CONFIG_ISA hwmon: (w83781d) Additional information about AS99127F PWM hwmon: (w83781d) Detect alias chips hwmon: (w83781d) Refactor beep enable handling hwmon: Drop dead links to old National Semiconductor chip datasheets hwmon: (w83791d) add support for thermal cruise mode hwmon: (w83791d) add pwm_enable support hwmon: (w83791d) add manual PWM support hwmon: (w83791d) fan 4/5 pins can also be used for gpio hwmon: (max1619) Use inline functions instead of macros hwmon: (it87) Fix thermal sensor type values hwmon: (lm78) Convert to a new-style i2c driver ... 17 October 2008, 16:33:39 UTC
8eb88c8 Linus Torvalds 17 October 2008, 16:30:35 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Fix debugfs_create_dir's error checking method for sound/soc/ ALSA: ASoC: Convert playpaq_wm8510 to bulk route registration API ALSA: kernel docs: fix sound/core/ kernel-doc ALSA: Handle NULL jacks in snd_jack_report() ALSA: hda - Fix PCM type of Nvidia HDMI devices 17 October 2008, 16:30:35 UTC
c53dbf5 Linus Torvalds 17 October 2008, 16:29:55 UTC Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block * 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: remove __generic_unplug_device() from exports block: move q->unplug_work initialization blktrace: pass zfcp driver data blktrace: add support for driver data block: fix current kernel-doc warnings block: only call ->request_fn when the queue is not stopped block: simplify string handling in elv_iosched_store() block: fix kernel-doc for blk_alloc_devt() block: fix nr_phys_segments miscalculation bug block: add partition attribute for partition number block: add BIG FAT WARNING to CONFIG_DEBUG_BLOCK_EXT_DEVT softirq: Add support for triggering softirq work on softirqs. 17 October 2008, 16:29:55 UTC
b73b636 Linus Torvalds 17 October 2008, 16:09:48 UTC Merge branch 'for-linus' of git://www.jni.nu/cris * 'for-linus' of git://www.jni.nu/cris: CRIS: proper defconfig setup [CRIS] Rename boot-linkscripts and fix the path to them. 17 October 2008, 16:09:48 UTC
ed09441 Linus Torvalds 17 October 2008, 16:00:23 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits) [SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n libiscsi: fix locking in iscsi_eh_device_reset libiscsi: check reason why we are stopping iscsi session to determine error value [SCSI] iscsi_tcp: return a descriptive error value during connection errors [SCSI] libiscsi: rename host reset to target reset [SCSI] iscsi class: fix endpoint id handling [SCSI] libiscsi: Support drivers initiating session removal [SCSI] libiscsi: fix data corruption when target has to resend data-in packets [SCSI] sd: Switch kernel printing level for DIF messages [SCSI] sd: Correctly handle all combinations of DIF and DIX [SCSI] sd: Always print actual protection_type [SCSI] sd: Issue correct protection operation [SCSI] scsi_error: fix target reset handling [SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc vendor events [SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handling [SCSI] lpfc 8.2.8 v2 : Revert target busy in favor of transport disrupted [SCSI] scsi_dh_alua: remove REQ_NOMERGE [SCSI] lpfc 8.2.8 : update driver version to 8.2.8 [SCSI] lpfc 8.2.8 : Add MSI-X support [SCSI] lpfc 8.2.8 : Update driver to use new Host byte error code DID_TRANSPORT_DISRUPTED ... 17 October 2008, 16:00:23 UTC
b225ee5 Linus Torvalds 17 October 2008, 15:58:52 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely) ipv4: Add a missing rcu_assign_pointer() in routing cache. [netdrvr] ibmtr: PCMCIA IBMTR is ok on 64bit xen-netfront: Avoid unaligned accesses to IP header lmc: copy_*_user under spinlock [netdrvr] myri10ge, ixgbe: remove broken select INTEL_IOATDMA 17 October 2008, 15:58:52 UTC
a0cf354 Jean Delvare 17 October 2008, 15:51:20 UTC hwmon: (adm1026) Prevent log spamming When debugging is enabled, the adm1026 driver currently logs the message "Setting VID from GPIO11-15" 108 times each time you run "sensors". Once should be enough. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Philip Pokorny <ppokorny@penguincomputing.com> 17 October 2008, 15:51:20 UTC
885fe4b Jean Delvare 17 October 2008, 15:51:20 UTC hwmon: (adm1026) Fix debug messages * Add missing new-line to one debug message. * Remove leading colon from 3 debug messages. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Philip Pokorny <ppokorny@penguincomputing.com> 17 October 2008, 15:51:20 UTC
366716e Corentin Labbe 17 October 2008, 15:51:20 UTC hwmon: (adm1029) Use mask for fan_div value This is my patch for testing correct values of fan div in adm1029 and prevent a division by 0 for some (unlikely) register values. Signed-off-by: Corentin Labbe <corentin.labbe@geomatys.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:20 UTC
d664a48 Darrick J. Wong 17 October 2008, 15:51:20 UTC hwmon: (adt7470) Add documentation Add at least the bare minimum of documentation for this chip. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:20 UTC
21d93c1 Darrick J. Wong 17 October 2008, 15:51:19 UTC hwmon: (ibmaem) Automatically load on IBM systems via DMI Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:19 UTC
ff92136 Darrick J. Wong 17 October 2008, 15:51:19 UTC hwmon: (ibmpex) Automatically load on IBM systems via DMI Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:19 UTC
0217eae Wolfgang Grandegger 17 October 2008, 15:51:19 UTC hwmon: (w83781d) Use new style driver binding This patch modifies the w83781d driver to use new style driver binding. Substantial code modifications are required to deal with the new interface, especially legacy device detection. [JD: largely edited to make the patch smaller and to get the driver to work again on ISA devices.] Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:19 UTC
360782d Jean Delvare 17 October 2008, 15:51:19 UTC hwmon: (w83781d) Stop abusing struct i2c_client for ISA devices Upcoming changes to the I2C part of the w83781d driver will cause ISA devices to no longer have a struct i2c_client at hand. So, we must stop (ab)using it now. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Wolfgang Grandegger <wg@grandegger.com> 17 October 2008, 15:51:19 UTC
443850c Wolfgang Grandegger 17 October 2008, 15:51:18 UTC hwmon: (w83781d) Make ISA interface depend on CONFIG_ISA Probing the ISA bus on systems without ISA bus may hang the system. This patch makes the ISA bus related code depend on the kernel configuration parameter CONFIG_ISA. It moves ISA bus related code into one #ifdef CONFIG_ISA ... #endif block and adds some helper function. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:18 UTC
10c08f9 Jean Delvare 17 October 2008, 15:51:18 UTC hwmon: (w83781d) Additional information about AS99127F PWM This information was provided in lm-sensors ticket #2350: http://www.lm-sensors.org/ticket/2350 This is IMHO still not enough to be able to safely implement fan control support for the AS99127F, but this is valuable information so I am adding it to the documentation. Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:18 UTC
c656620 Jean Delvare 17 October 2008, 15:51:18 UTC hwmon: (w83781d) Detect alias chips The W83781D and W83782D can be accessed either on the I2C bus or the ISA bus. We must not access the same chip through both interfaces. So far we were relying on the user passing the correct ignore parameter to skip the registration of the I2C interface as suggested by sensors-detect, but this is fragile: the user may load the w83781d driver without running sensors-detect, and the i2c bus numbers are not stable across reboots and hardware changes. So, better detect alias chips in the driver directly, and skip any I2C chip which is obviously an alias of the ISA chip. This is done by comparing the value of 26 selected registers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Wolfgang Grandegger <wg@grandegger.com> 17 October 2008, 15:51:18 UTC
2fbbbf1 Jean Delvare 17 October 2008, 15:51:18 UTC hwmon: (w83781d) Refactor beep enable handling We can handle the beep enable bit as any other beep mask bit for slightly smaller code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Wolfgang Grandegger <wg@grandegger.com> 17 October 2008, 15:51:18 UTC
6aa693b Jean Delvare 17 October 2008, 15:51:17 UTC hwmon: Drop dead links to old National Semiconductor chip datasheets Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:17 UTC
a5a4598 Marc Hulsman 17 October 2008, 15:51:17 UTC hwmon: (w83791d) add support for thermal cruise mode Add support to set target temperature and tolerance for thermal cruise mode. Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:17 UTC
b5938f8 Marc Hulsman 17 October 2008, 15:51:17 UTC hwmon: (w83791d) add pwm_enable support Add support for pwm_enable. Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:17 UTC
6495ce1 Marc Hulsman 17 October 2008, 15:51:17 UTC hwmon: (w83791d) add manual PWM support Add PWM manual control. Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:17 UTC
6e1ecd9 Marc Hulsman 17 October 2008, 15:51:16 UTC hwmon: (w83791d) fan 4/5 pins can also be used for gpio Pins fan/pwm 4-5 can be in use as GPIO. If that is the case, do not create their sysfs-interface. Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:16 UTC
a80e8ee Andrew Morton 17 October 2008, 15:51:16 UTC hwmon: (max1619) Use inline functions instead of macros Macros evaluating their arguments more than once are evil. Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:16 UTC
4ed1077 Jean Delvare 17 October 2008, 15:51:16 UTC hwmon: (it87) Fix thermal sensor type values The it87 driver doesn't follow the standard sensor type values as documented in Documentation/hwmon/sysfs-interface. It uses value 2 for thermistors instead of value 4. This causes "sensors" to tell the user that the chip is setup for a transistor while it is actually setup for a thermistor. Using value 4 for thermistors solves the problem. For compatibility reasons, we still accept value 2 but emit a warning message so that users update their configuration files. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com> 17 October 2008, 15:51:16 UTC
0c6e973 Jean Delvare 17 October 2008, 15:51:16 UTC hwmon: (lm78) Convert to a new-style i2c driver The new-style lm78 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:16 UTC
6e1b502 Jean Delvare 17 October 2008, 15:51:15 UTC hwmon: (lm78) Stop abusing struct i2c_client for ISA devices Upcoming changes to the I2C part of the lm78 driver will cause ISA devices to no longer have a struct i2c_client at hand. So, we must stop (ab)using it now. Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:15 UTC
ad3273b Jean Delvare 17 October 2008, 15:51:15 UTC hwmon: (lm78) Prevent misdetection of Winbond chips The LM78 detection is relatively weak, and sometimes recent Winbond chips can be misdetected as an LM78. We have had repeated reports of this happening. We have an explicit check against this for the ISA access, do the same for I2C access now. Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:15 UTC
18c73f9 Jean Delvare 17 October 2008, 15:51:15 UTC hwmon: (lm78) Detect alias chips The LM78 and LM79 can be accessed either on the I2C bus or the ISA bus. We must not access the same chip through both interfaces. So far we were relying on the user passing the correct ignore parameter to skip the registration of the I2C interface as suggested by sensors-detect, but this is fragile: the user may load the lm78 driver without running sensors-detect, and the i2c bus numbers are not stable across reboots and hardware changes. So, better detect alias chips in the driver directly, and skip any I2C chip which is obviously an alias of the ISA chip. This is done by comparing the value of 26 selected registers. Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:15 UTC
47c1553 Jean Delvare 17 October 2008, 15:51:15 UTC hwmon: (lm78) Fix I/O resource conflict with PNP Only request I/O ports 0x295-0x296 instead of the full I/O address range. This solves a conflict with PNP resources on a few motherboards. Also request the I/O ports in two parts (4 low ports, 4 high ports) during device detection, otherwise the PNP resource make the request (and thus the detection) fail. This is the exact same fix that was applied to driver w83781d in March 2008 to address the same problem: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2961cb22ef02850d90e7a12c28a14d74e327df8d Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:15 UTC
f908037 Jean Delvare 17 October 2008, 15:51:14 UTC hwmon: (lm85) Better label names Label names ERROR1 and ERROR3 aren't exactly explicit. Change them for better names that indicate what we are up to. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at> 17 October 2008, 15:51:14 UTC
1b92ada Jean Delvare 17 October 2008, 15:51:14 UTC hwmon: (lm85) Simplify RANGE_TO_REG Function RANGE_TO_REG can easily be simplified. Credits go to Herbert Poetzl for indirectly suggesting this to me. I tested that the new implementation returns the same result as the original implementation for all input values. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at> 17 October 2008, 15:51:14 UTC
67712d0 Jean Delvare 17 October 2008, 15:51:14 UTC hwmon: (lm85) Convert to a new-style i2c driver The new-style lm85 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at> 17 October 2008, 15:51:14 UTC
8a0795d Jean Delvare 17 October 2008, 15:51:14 UTC hwmon: (lm85) Support different PWM frequency tables The Analog Devices and SMSC devices supported by the lm85 driver do not have the same PWM frequency table as the National Semiconductor devices. Add support for per-device frequency tables. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at> 17 October 2008, 15:51:14 UTC
86010c9 Jean Delvare 17 October 2008, 15:51:13 UTC hwmon: (lm85) Select the closest PWM frequency The LM85 and compatible chips only support 8 arbitrary PWM frequencies. The algorithm to pick one of them based on the user input is not optimum. Improve it to always pick the closest supported frequency. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at> 17 October 2008, 15:51:13 UTC
34e7dc6 Jean Delvare 17 October 2008, 15:51:13 UTC hwmon: (lm85) Implement the standard PWM frequency interface Implement the standard PWM frequency interface: pwm[1-*]_freq in units of 1 Hz, instead of the non-standard pwm[1-*]_auto_pwm_freq in units of 0.1 Hz. The old naming was not only non-standard, it was also confusing, because it suggested that the frequency value only applied in automatic fan speed mode, which isn't true. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at> 17 October 2008, 15:51:13 UTC
69fc1fe Jean Delvare 17 October 2008, 15:51:13 UTC hwmon: (lm85) Rework the device detection Rework the device detection to make it clearer and faster in the general case (when a known device is found.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Herbert Poetzl <herbert@13thfloor.at> 17 October 2008, 15:51:13 UTC
dbee356 Dmitry Torokhov 17 October 2008, 15:51:13 UTC hwmon: (ams) Simplify IRQ handling routine Simplify the IRQ handling routine of ams driver. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:13 UTC
ee4cd32 Dmitry Torokhov 17 October 2008, 15:51:12 UTC hwmon: (ams) Fix locking issues Use a separate mutex to serialize input device creation/removal, otheriwse we deadlock if we try to remove input device while it is being polled. Also do not take ams_info.lock when it is not needed. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:12 UTC
0a02002 Dmitry Torokhov 17 October 2008, 15:51:12 UTC hwmon: (ams) Fix permissions on 'joystick' module parameter We should not allow writes to the 'joystick' module parameters since writing there will not trigger creation of the input device. Disable writes since we provide alternative way of enabling input device via AMS device's sysfs attribute. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:12 UTC
810ad7b Jean Delvare 17 October 2008, 15:51:12 UTC hwmon: (ams) Convert to a new-style i2c driver The legacy i2c binding model is phasing out, so the ams driver needs to be converted to a new-style i2c driver. Here is a naive approach of this conversion. Basically it is moving the i2c device creation from the ams driver to the i2c-powermac driver. This should work, but I suspect we could come up with something cleaner by declaring the i2c device as part of the platform setup. This could be done later by someone more familiar with openfirmware-based platforms than I am myself. One nice thing brought by this conversion is that the ams driver should be loaded automatically on systems where is is needed (at least when the I2C interface to the chip is used) providing coldplug-aware user-space environment. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Cc: Stelian Pop <stelian@popies.net> Cc: Michael Hanselmann <linux-kernel@hansmi.ch> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> 17 October 2008, 15:51:12 UTC
47064d6 Ben Hutchings 17 October 2008, 15:51:12 UTC hwmon: (lm87) Add support for configuration through platform_data The lm87 driver normally assumes that firmware configured the chip correctly. Since this is not always the case, alllow platform code to set the channel register value via platform_data. All other configuration registers can be changed after driver initialisation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:12 UTC
d2cac80 Ben Hutchings 17 October 2008, 15:51:11 UTC hwmon: (lm87) Restore original configuration register on removal This means that if we have to start the monitor when probed, we also stop it on removal. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:11 UTC
49ae6cc Ben Hutchings 17 October 2008, 15:51:11 UTC hwmon: (lm87) Fix masking of config register in lm87_init_client() lm87_init_client() conditionally sets the Start bit and clears the INT#_Clear bit in the Config 1 register. The condition should be that either of these bits needs changing, but currently it checks the (self-clearing) Initialization bit instead of INT#_Clear. Fix the condition and also ensure we never set the Initialization bit. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:11 UTC
4b4e7a7 Jean Delvare 17 October 2008, 15:51:11 UTC hwmon: (lm90) Don't spam the kernel log Degrade the "Unsupported chip" message from info to debug level. There's nothing wrong with this, so no need to bother the user. Also make the message slightly more descriptive. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Martyn Welch <martyn.welch@gefanuc.com> 17 October 2008, 15:51:11 UTC
271dabf Ben Hutchings 17 October 2008, 15:51:11 UTC hwmon: (lm90) Support MAX6646, MAX6647 and MAX6649 These Maxim chips are similar to MAX6657 but use unsigned temperature values to allow for readings up to 145 degrees. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 17 October 2008, 15:51:11 UTC
9d4d383 Ben Hutchings 17 October 2008, 15:51:10 UTC hwmon: (lm90) Rename temperature conversion functions to match usage The encoding of temperatures varies between chips and modes. So do not use "temp1" or "temp2" in the names of the conversion functions, but specify the encoding. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Martyn Welch <martyn.welch@gefanuc.com> 17 October 2008, 15:51:10 UTC
23b2d47 Nate Case 17 October 2008, 15:51:10 UTC hwmon: (lm90) Support ADT7461 in extended mode Support ADT7461 in extended temperature range mode, which will change the range of readings from 0..127 to -64..191 degC. Adjust the register conversion functions accordingly. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Martyn Welch <martyn.welch@gefanuc.com> 17 October 2008, 15:51:10 UTC
cea50fe Nate Case 17 October 2008, 15:51:10 UTC hwmon: (lm90) Convert some macros to static functions Use static functions instead of the TEMPx_FROM_REG* and TEMPx_TO_REG* macros. This will ensure type safety and eliminate any side effects from arguments passed in since the macros referenced 'val' multiple times. This change should not affect functionality. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Martyn Welch <martyn.welch@gefanuc.com> 17 October 2008, 15:51:10 UTC
a874a10 Jean Delvare 17 October 2008, 15:51:10 UTC hwmon: (lm90) Update datasheet links Update the links to the datasheet of some of the devices supported by the lm90 driver. Also remove the links from the driver itself, so that we don't have to update them twice each time they change. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Martyn Welch <martyn.welch@gefanuc.com> 17 October 2008, 15:51:10 UTC
5f502a8 Jean Delvare 17 October 2008, 15:51:09 UTC hwmon: (lm90) Don't access nonexistent registers on Maxim chips The Maxim chips supported by the lm90 driver have 8-bit high and low remote limit values, not 11-bit as the other chips have. So stop reading from and writing to registers that do not exist on these chips. Also round the limit values set by the user properly. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Martyn Welch <martyn.welch@gefanuc.com> 17 October 2008, 15:51:09 UTC
f65e170 Jean Delvare 17 October 2008, 15:51:09 UTC hwmon: (lm90) Support the extra resolution bits of MAX6657 The Maxim MAX6657, MAX6658 and MAX6659 have extra resolution bits for the local temperature measurement. Let the lm90 driver read them and export them to user-space. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Martyn Welch <martyn.welch@gefanuc.com> 17 October 2008, 15:51:09 UTC
6388a38 Jean Delvare 17 October 2008, 15:51:09 UTC hwmon: (lm90) Move 16-bit value read to a separate function Move the code which aggregates two 8-bit register values into a 16-bit value to a separate function. We'll need to do it a second time soon and I don't want to duplicate the code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Martyn Welch <martyn.welch@gefanuc.com> 17 October 2008, 15:51:09 UTC
219b22b Takashi Iwai 17 October 2008, 15:24:23 UTC Merge branch 'topic/asoc' into for-linus 17 October 2008, 15:24:23 UTC
7c2dfee Zhaolei 17 October 2008, 13:04:55 UTC ALSA: Fix debugfs_create_dir's error checking method for sound/soc/ debugfs_create_dir() returns NULL if an error occurs, returns -ENODEV when debugfs is not enabled in the kernel. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 17 October 2008, 15:23:48 UTC
2190521 Takashi Iwai 17 October 2008, 14:28:20 UTC Merge branches 'topic/asoc', 'topic/hda' and 'topic/misc-fixes' into for-linus 17 October 2008, 14:28:20 UTC
f73e2d1 Jens Axboe 17 October 2008, 12:03:08 UTC block: remove __generic_unplug_device() from exports The only out-of-core user is IDE, and that should be using blk_start_queueing() instead. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 17 October 2008, 12:03:08 UTC
713ada9 Peter Zijlstra 16 October 2008, 11:44:57 UTC block: move q->unplug_work initialization modprobe loop; rmmod loop effectively creates a blk_queue and destroys it which results in q->unplug_work being canceled without it ever being initialized. Therefore, move the initialization of q->unplug_work from blk_queue_make_request() to blk_alloc_queue*(). Reported-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 17 October 2008, 06:46:57 UTC
0997f1c Stefan Raspl 16 October 2008, 06:23:39 UTC blktrace: pass zfcp driver data This patch writes the channel and fabric latencies in nanoseconds per request via blktrace for later analysis. The utilization of the inbound and outbound adapter queue is also reported. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 17 October 2008, 06:46:57 UTC
756f824 Stefan Raspl 16 October 2008, 06:23:21 UTC blktrace: add support for driver data This patch adds the new api call blk_add_driver_data() to blktrace. It allows to trace device driver-specific binary data. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 17 October 2008, 06:46:57 UTC
496aa8a Randy Dunlap 16 October 2008, 05:46:23 UTC block: fix current kernel-doc warnings Fix block kernel-doc warnings: Warning(linux-2.6.27-git4//fs/block_dev.c:1272): No description found for parameter 'path' Warning(linux-2.6.27-git4//block/blk-core.c:1021): No description found for parameter 'cpu' Warning(linux-2.6.27-git4//block/blk-core.c:1021): No description found for parameter 'part' Warning(/var/linsrc/linux-2.6.27-git4//block/genhd.c:544): No description found for parameter 'partno' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 17 October 2008, 06:46:57 UTC
80a4b58 Jens Axboe 14 October 2008, 07:51:06 UTC block: only call ->request_fn when the queue is not stopped Callers should use either blk_run_queue/__blk_run_queue, or blk_start_queueing() to invoke request handling instead of calling ->request_fn() directly as that does not take the queue stopped flag into account. Also add appropriate comments on the above functions to detail their usage. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 17 October 2008, 06:46:57 UTC
ee2e992 Li Zefan 14 October 2008, 06:49:56 UTC block: simplify string handling in elv_iosched_store() strlcpy() guarantees the dest buffer is NULL teminated. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 17 October 2008, 06:46:57 UTC
e6d6384 Li Zefan 14 October 2008, 06:49:34 UTC block: fix kernel-doc for blk_alloc_devt() No argument 'gfp_mask' for blk_alloc_devt(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 17 October 2008, 06:46:56 UTC
8677142 FUJITA Tomonori 13 October 2008, 12:19:05 UTC block: fix nr_phys_segments miscalculation bug This fixes the bug reported by Nikanth Karthikesan <knikanth@suse.de>: http://lkml.org/lkml/2008/10/2/203 The root cause of the bug is that blk_phys_contig_segment miscalculates q->max_segment_size. blk_phys_contig_segment checks: req->biotail->bi_size + next_req->bio->bi_size > q->max_segment_size But blk_recalc_rq_segments might expect that req->biotail and the previous bio in the req are supposed be merged into one segment. blk_recalc_rq_segments might also expect that next_req->bio and the next bio in the next_req are supposed be merged into one segment. In such case, we merge two requests that can't be merged here. Later, blk_rq_map_sg gives more segments than it should. We need to keep track of segment size in blk_recalc_rq_segments and use it to see if two requests can be merged. This patch implements it in the similar way that we used to do for hw merging (virtual merging). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 17 October 2008, 06:46:56 UTC
0fc71e3 Tejun Heo 13 October 2008, 11:27:59 UTC block: add partition attribute for partition number With extended devt, finding out the partition number becomes a bit more challenging as subtracting the minor number from that of the parent device doesn't work anymore. The only thing left is parsing the partition name which is brittle and not exactly universal (some have '-' between the device name and partition number while others don't). This patch introduced partition attribute which contains the partition number of the device. This should make finding partitions and its index easier. This problem and solution were suggested by H. Peter Anvin. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 17 October 2008, 06:46:56 UTC
0e11e34 Tejun Heo 13 October 2008, 08:46:01 UTC block: add BIG FAT WARNING to CONFIG_DEBUG_BLOCK_EXT_DEVT CONFIG_DEBUG_BLOCK_EXT_DEVT can break booting even on some modern distros. Add BIG FAT WARNING to keep people at a safe distance. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 17 October 2008, 06:46:56 UTC
54514a7 David S. Miller 24 September 2008, 05:15:57 UTC softirq: Add support for triggering softirq work on softirqs. This is basically a genericization of Jens Axboe's block layer remote softirq changes. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> 17 October 2008, 06:46:56 UTC
2e532d6 Linus Torvalds 16 October 2008, 23:11:43 UTC {pci,pnp} quirks.c: don't use deprecated print_fn_descriptor_symbol() I dunno how this missed Bjorn and his quest to use %pF in commit c80cfb0406c01bb5da91bfe30f5cb1fd96831138 ("vsprintf: use new vsprintf symbolic function pointer format"), but it did. So use %pF in the two remaining places that still tried to print out function pointers by hand. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 October 2008, 23:11:43 UTC
52ad096 Linus Torvalds 16 October 2008, 22:39:20 UTC Merge git://git.linux-nfs.org/projects/trondmy/nfs-2.6 * git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (53 commits) NFS: Fix a resolution problem with nfs_inode->cache_change_attribute NFS: Fix the resolution problem with nfs_inode_attrs_need_update() NFS: Changes to inode->i_nlinks must set the NFS_INO_INVALID_ATTR flag RPC/RDMA: ensure connection attempt is complete before signalling. RPC/RDMA: correct the reconnect timer backoff RPC/RDMA: optionally emit useful transport info upon connect/disconnect. RPC/RDMA: reformat a debug printk to keep lines together. RPC/RDMA: harden connection logic against missing/late rdma_cm upcalls. RPC/RDMA: fix connect/reconnect resource leak. RPC/RDMA: return a consistent error, when connect fails. RPC/RDMA: adhere to protocol for unpadded client trailing write chunks. RPC/RDMA: avoid an oops due to disconnect racing with async upcalls. RPC/RDMA: maintain the RPC task bytes-sent statistic. RPC/RDMA: suppress retransmit on RPC/RDMA clients. RPC/RDMA: fix connection IRD/ORD setting RPC/RDMA: support FRMR client memory registration. RPC/RDMA: check selected memory registration mode at runtime. RPC/RDMA: add data types and new FRMR memory registration enum. RPC/RDMA: refactor the inline memory registration code. NFS: fix nfs_parse_ip_address() corner case ... 16 October 2008, 22:39:20 UTC
8cde1ad Linus Torvalds 16 October 2008, 22:38:48 UTC Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched_clock: prevent scd->clock from moving backwards 16 October 2008, 22:38:48 UTC
6bb7a93 Linus Torvalds 16 October 2008, 22:36:58 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: us122l: fix missing unlock in usb_stream_hwdep_vm_fault() ALSA: hda - Fix quirk lists for realtek codecs ALSA: hda - Add support of ALC272 ALSA: hda - Add ALC887 support ALSA: hda - Add ALC1200 support ALSA: hda - Fix PCI SSID of ASUS M90V ALSA: hda - Add auto mic switch in realtek auto-probe mode ALSA: Fix pxa2xx-ac97-lib.c compilation ALSA: ASoC: Hide TLV320AIC26 configuration option for non-OpenFirwmare users ALSA: hda: fix nid variable warning ALSA: ASoC: Fix compile-time warning for tlv320aic23.c 16 October 2008, 22:36:58 UTC
08d19f5 Linus Torvalds 16 October 2008, 22:36:00 UTC Merge branch 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (134 commits) KVM: ia64: Add intel iommu support for guests. KVM: ia64: add directed mmio range support for kvm guests KVM: ia64: Make pmt table be able to hold physical mmio entries. KVM: Move irqchip_in_kernel() from ioapic.h to irq.h KVM: Separate irq ack notification out of arch/x86/kvm/irq.c KVM: Change is_mmio_pfn to kvm_is_mmio_pfn, and make it common for all archs KVM: Move device assignment logic to common code KVM: Device Assignment: Move vtd.c from arch/x86/kvm/ to virt/kvm/ KVM: VMX: enable invlpg exiting if EPT is disabled KVM: x86: Silence various LAPIC-related host kernel messages KVM: Device Assignment: Map mmio pages into VT-d page table KVM: PIC: enhance IPI avoidance KVM: MMU: add "oos_shadow" parameter to disable oos KVM: MMU: speed up mmu_unsync_walk KVM: MMU: out of sync shadow core KVM: MMU: mmu_convert_notrap helper KVM: MMU: awareness of new kvm_mmu_zap_page behaviour KVM: MMU: mmu_parent_walk KVM: x86: trap invlpg KVM: MMU: sync roots on mmu reload ... 16 October 2008, 22:36:00 UTC
1c95e1b Linus Torvalds 16 October 2008, 22:32:46 UTC Fix kernel/softirq.c printk format warning properly This fixes the broken 77af7e3403e7314c47b0c07fbc5e4ef21d939532 ("softirq, warning fix: correct a format to avoid a warning") fix correctly. The type of a pointer subtraction is not "int", nor is it "long". It can be either (or something else). It's "ptrdiff_t", and the printk format for it is "%td". Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 October 2008, 22:32:46 UTC
95a5afc Johannes Berg 16 October 2008, 22:24:51 UTC net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely) Some code here depends on CONFIG_KMOD to not try to load protocol modules or similar, replace by CONFIG_MODULES where more than just request_module depends on CONFIG_KMOD and and also use try_then_request_module in ebtables. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> 16 October 2008, 22:24:51 UTC
e533b22 Linus Torvalds 16 October 2008, 22:17:40 UTC Merge branch 'core-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: do_generic_file_read: s/EINTR/EIO/ if lock_page_killable() fails softirq, warning fix: correct a format to avoid a warning softirqs, debug: preemption check x86, pci-hotplug, calgary / rio: fix EBDA ioremap() IO resources, x86: ioremap sanity check to catch mapping requests exceeding, fix IO resources, x86: ioremap sanity check to catch mapping requests exceeding the BAR sizes softlockup: Documentation/sysctl/kernel.txt: fix softlockup_thresh description dmi scan: warn about too early calls to dmi_check_system() generic: redefine resource_size_t as phys_addr_t generic: make PFN_PHYS explicitly return phys_addr_t generic: add phys_addr_t for holding physical addresses softirq: allocate less vectors IO resources: fix/remove printk printk: robustify printk, update comment printk: robustify printk, fix #2 printk: robustify printk, fix printk: robustify printk Fixed up conflicts in: arch/powerpc/include/asm/types.h arch/powerpc/platforms/Kconfig.cputype manually. 16 October 2008, 22:17:40 UTC
0999d97 Linus Torvalds 16 October 2008, 22:08:45 UTC Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix compat-vdso x86/mm: unify init task OOM handling x86/mm: do not trigger a kernel warning if user-space disables interrupts and generates a page fault 16 October 2008, 22:08:45 UTC
70a3075 Julia Lawall 15 October 2008, 15:51:04 UTC FRV: Eliminate NULL test and memset after alloc_bootmem As noted by Akinobu Mita in patch b1fceac2b9e04d278316b2faddf276015fc06e3b, alloc_bootmem and related functions never return NULL and always return a zeroed region of memory. Thus a NULL test or memset after calls to these functions is unnecessary. arch/frv/mm/init.c | 2 -- 1 file changed, 2 deletions(-) This was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; statement S; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) ... when != E ( - BUG_ON (E == NULL); | - if (E == NULL) S ) @@ expression E,E1; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) ... when != E - memset(E,0,E1); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 October 2008, 22:06:54 UTC
cb76d5a Harvey Harrison 15 October 2008, 15:50:59 UTC FRV: Switch unaligned access to the packed-struct implementation Switch unaligned access to the packed-struct implementation for BE accesses as this reduces the size of the kernel a little. LE still uses the byte shift. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 October 2008, 22:06:54 UTC
c9af956 David Howells 15 October 2008, 15:50:53 UTC FRV: Provide dma_map_page() for NOMMU and fix comments Provide dma_map_page() for the NOMMU-mode FRV arch. Also do some fixing on the comments attached to the various DMA functions for both MMU and NOMMU mode FRV code. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 October 2008, 22:06:54 UTC
9bd8f9c Bjorn Helgaas 15 October 2008, 15:50:48 UTC frv: use generic pci_enable_resources() Use the generic pci_enable_resources() instead of the arch-specific code. Unlike this arch-specific code, the generic version: - checks PCI_NUM_RESOURCES (11), not 6, resources - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set - skips ROM resources unless IORESOURCE_ROM_ENABLE is set - checks for resource collisions with "!r->parent" Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 October 2008, 22:06:54 UTC
1eee21a Linus Torvalds 16 October 2008, 22:02:24 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: Add more documentation to firewire-cdev.h firewire: fix ioctl() return code firewire: fix setting tag and sy in iso transmission firewire: fw-sbp2: fix another small generation access bug firewire: fw-sbp2: enforce s/g segment size limit firewire: fw_send_request_sync() ieee1394: survive a few seconds connection loss ieee1394: nodemgr clean up class iterators ieee1394: dv1394, video1394: remove unnecessary expressions ieee1394: raw1394: make write() thread-safe ieee1394: raw1394: narrow down the state_mutex protected region ieee1394: raw1394: replace BKL by local mutex, make ioctl() and mmap() thread-safe ieee1394: sbp2: enforce s/g segment size limit ieee1394: sbp2: check for DMA mapping failures ieee1394: sbp2: stricter dma_sync ieee1394: Use DIV_ROUND_UP 16 October 2008, 22:02:24 UTC
9d85db2 Harvey Harrison 16 October 2008, 20:40:35 UTC lib: remove defining macros for strict_strto?? Open-code them rather than using defining macros. The function bodies are now next to their kerneldoc comments as a bonus. Add casts to the signed cases as they call into the unsigned versions. Avoids the sparse warnings: lib/vsprintf.c:249:1: warning: incorrect type in argument 3 (different signedness) lib/vsprintf.c:249:1: expected unsigned long *res lib/vsprintf.c:249:1: got long *res lib/vsprintf.c:249:1: warning: incorrect type in argument 3 (different signedness) lib/vsprintf.c:249:1: expected unsigned long *res lib/vsprintf.c:249:1: got long *res lib/vsprintf.c:251:1: warning: incorrect type in argument 3 (different signedness) lib/vsprintf.c:251:1: expected unsigned long long *res lib/vsprintf.c:251:1: got long long *res lib/vsprintf.c:251:1: warning: incorrect type in argument 3 (different signedness) lib/vsprintf.c:251:1: expected unsigned long long *res lib/vsprintf.c:251:1: got long long *res Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 October 2008, 21:58:08 UTC
back to top