Skip to main content

Browse the archive

swh:1:snp:3c665ee4f67729f27f2e40193ab88e7298cf0fef
sort by:
Revision Author Date Message Commit Date
bb86bf2 Ralf Baechle 25 April 2009, 09:25:34 UTC MIPS: Fix highmem. Commit 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0 (kernel.org) rsp. b3594a089f1c17ff919f8f78505c3f20e1f6f8ce (linux-mips.org): > From: Chris Dearman <chris@mips.com> > Date: Wed, 19 Sep 2007 00:58:24 +0100 > Subject: [PATCH] [MIPS] Allow setting of the cache attribute at run time. > > Slightly tacky, but there is a precedent in the sparc archirecture code. introduces the variable _page_cachable_default, which defaults to zero and. is used to create the prototype PTE for __kmap_atomic in arch/mips/mm/init.c:kmap_init before initialization in arch/mips/mm/c-r4k.c:coherency_setup, so the default value of 0 will be used as the CCA of kmap atomic pages which on many processors is not a defined CCA value and may result in writes to kmap_atomic pages getting corrupted. Debugged by Jon Fraser (jfraser@broadcom.com). Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:29 UTC
0b54352 Ralf Baechle 30 April 2009, 00:16:19 UTC MIPS: Fix sign-extension bug in 32-bit kernel on 32-bit hardware. Probably nobody does arithmetic on cp0 register values so this has never bitten. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:29 UTC
5c5dd1d Shane McDonald 28 April 2009, 23:00:27 UTC MIPS: MSP71xx: Remove the RAMROOT functions The RAMROOT function was a successful but non-portable attempt to append the root filesystem to the end of the kernel image. The preferred and portable solution is to use an initramfs instead. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:29 UTC
1a4ba06 Ralf Baechle 28 April 2009, 17:28:33 UTC MIPS: Use -mno-check-zero-division I don't think that in 15 years of Linux/MIPS the zero division checking code generated by gcc by default has ever caught anything. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:28 UTC
05e4140 Ralf Baechle 28 April 2009, 17:38:35 UTC MIPS: Set compiler options only after the compiler prefix has ben set. Otherwise indigestable options might be passed to the host compiler. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:28 UTC
165533c Ralf Baechle 28 April 2009, 15:31:50 UTC MIPS: IP27: Get rid of #ident. Gcc 4.4.0 doesn't like it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:28 UTC
ef41f46 Ralf Baechle 28 April 2009, 12:17:54 UTC MIPS: uaccess: Switch lock annotations to might_fault(). Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:28 UTC
005076a Shane McDonald 28 April 2009, 05:52:25 UTC MIPS: MSP71xx: Resolve use of non-existent GPIO routines in msp71xx reset There have been a number of compile problems with the msp71xx configuration ever since it was included in the linux-mips.org repository. This patch resolves compilation problems with attempting to reset the board using non-existent GPIO routines. This patch has been compile-tested against the current HEAD. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:28 UTC
01caec8 Shane McDonald 28 April 2009, 05:50:21 UTC MIPS: MSP71xx: Resolve multiple definition of plat_timer_setup There have been a number of compile problems with the msp71xx configuration ever since it was included in the linux-mips.org repository. This patch resolves the "multiple definition of plat_timer_setup" problem, and creates the required get_c0_compare_int function. This patch has been compile-tested against the current HEAD. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:28 UTC
ed01b3d Ralf Baechle 27 April 2009, 14:46:21 UTC MIPS: Make uaccess.h slightly more sparse friendly. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:28 UTC
d0aab92 Ralf Baechle 27 April 2009, 13:31:34 UTC MIPS: Make access_ok() sideeffect proof. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:27 UTC
1699e5c Thomas Bogendoerfer 21 April 2009, 21:31:12 UTC MIPS: IP27: Fix clash with NMI_OFFSET from hardirq.h There was already a define for NMI_OFFSET in asm/sn/addr.h, which now clashes with linux/hardirq.h. Rename the one in sn/addr.h to fix IP27 builds.. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:27 UTC
ad058e9 Manuel Lauss 22 April 2009, 06:01:48 UTC MIPS: Alchemy: Timer build fix Fix breakage introduced by 8e19608e8b5c001e4a66ce482edc474f05fb7355. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:27 UTC
237e5a3 Ralf Baechle 20 April 2009, 11:43:05 UTC MIPS: Kconfig: Delete duplicate definition of RWSEM_GENERIC_SPINLOCK. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:27 UTC
c52399b Ralf Baechle 02 April 2009, 12:07:10 UTC MIPS: Cavium: Add support for 8k and 32k page sizes. Beyond the requirements of the architecture standard Cavium also supports 8k and 32k pages. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: David Daney <ddaney@caviumnetworks.com> 14 May 2009, 12:50:27 UTC
740ebe4 Atsushi Nemoto 02 April 2009, 16:01:21 UTC MIPS: TXx9: Fix possible overflow in clock calculations Addition of -fwrapv option in 2.6.29 discloses possible overflow with signed arithmetics. For example, result of "a * 6 / 12" (int a = 400000000) is 200000000 without -fwrapv but -157913941 with -fwrapv. Change some variable to unsigned to avoid such overflows. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:27 UTC
4f29c05 Atsushi Nemoto 22 January 2009, 15:42:11 UTC MIPS: Synchronize dma_map_page and dma_map_single Synchronize dma_map_page/dma_unmap_page and dma_map_single/dma_unmap_single. This will reduce unnecessary writebacks and invalidates. [Ralf: make dma_unmap_page an inline function.] Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:26 UTC
47740eb Ralf Baechle 19 April 2009, 01:21:22 UTC MIPS: Enable CLO / CLZ instructions via separate CPU property This is useful for IDT RC32332, RC32334 and NEC VR5500 processors which do not implement the full MIPS32 / MIPS64 architecture. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:26 UTC
5d57c31 Zhang Le 15 April 2009, 09:01:52 UTC MIPS: Loongson 2 needs no hazard barriers. Quoting from Loongson2FUserGuide.pdf: 5.22.1 Hazards The processor detects most of the pipeline hazards in hardware, including CP0 hazards and load hazards. No NOP instructions are required to correct instruction sequences. Signed-off-by: Zhang Le <r0bertz@gentoo.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:26 UTC
6cec2a0 Atsushi Nemoto 11 April 2009, 14:31:50 UTC MIPS: Do not include seccomp.h from compat.h The compat.h does not need seccomp.h since TIF_32BIT was moved to thread_info.h This fixes a build error of 64-bit kernel without CONFIG_SECCOMP. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: : David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:26 UTC
dfe99b9 Atsushi Nemoto 15 April 2009, 17:22:21 UTC MIPS: RBTX4939: Fix typo in system name Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:26 UTC
c7d1673 David Daney 16 April 2009, 16:20:17 UTC MIPS: Compat: Use generic 32-bit wrapers for sys_timerfd_{g,s}ettime The LTP timerfd01 test is failing (blocking forever) on the 32-bit ABIs. We need to use the compat_* wrappers for these system calls. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:25 UTC
592e527 Ralf Baechle 05 April 2009, 22:31:22 UTC MIPS: Fix build error if CONFIG_CEVT_R4K is undefined. Introduced by 99aa5029937ee926e3b249369e208d7013cd381b. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:25 UTC
a575b84 Zhang Le 02 April 2009, 07:41:45 UTC MIPS: Add Loongson cpu-feature-overrides.h I have taken Wu Zhangjin's and Philippe Vachon's version as references, did a little modification and tested on 16K page size kernel. It works well. Unfornately although it already has defined cpu_has_dc_aliases as 1, 4k page size still not working. More work needed here. Signed-off-by: Zhang Le <r0bertz@gentoo.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:25 UTC
7fc7316 Ralf Baechle 01 April 2009, 14:11:53 UTC MIPS: Print the actual detected I-cache associativity on bootup. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:25 UTC
b6d57ae Dmitri Vorobiev 30 March 2009, 19:53:26 UTC MIPS: gbe: Make needlessly global symbols static in drivers/video/gbefb.c The following symbols are needlessly defined global: default_mode default_var gbe_mem_phys gbe_turn_off gbefb_exit gbefb_init gbefb_setup This error was noticed by namespacecheck when compiling ip32_defconfig. This patch makes the symbols static. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:25 UTC
ae53738 Dmitri Vorobiev 30 March 2009, 19:53:25 UTC MIPS: IP32: Fix needlessly global symbols in arch/mips/sgi-ip32/ip32-irq.c The following symbols are needlessly defined global: cpuerr_irq and memerr_irq. This patch makes the symbols static. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:25 UTC
36a09d7 Dmitri Vorobiev 30 March 2009, 19:53:24 UTC MIPS: IP32: ip32_be_handler symbol is needlessly defined global The file arch/mips/sgi-ip32/ip32-berr.c needlessly defines the function ip32_be_handler() as global, and this patch makes it static. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:25 UTC
1291417 Dmitri Vorobiev 30 March 2009, 19:53:23 UTC MIPS: IP32: Two symbols can become static The file arch/mips/mm/sc-rm7k.c needlessly defines two global symbols: rm7k_sc_ops rm7k_tcache_enabled This patch makes these symbols static. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:24 UTC
1d9c114 Manuel Lauss 31 March 2009, 16:44:36 UTC MIPS: au1xxx-ide: Fix build with CONFIG_PM au1xxx_power_dev_t? is never defined; get rid of all PM stuff as well since it is not in the driver source anyway. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:24 UTC
d16797b Manuel Lauss 31 March 2009, 16:51:28 UTC MIPS: Alchemy: Add missing Au1200 GPIO203 interrupt Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:24 UTC
b7863ee Manuel Lauss 31 March 2009, 16:51:27 UTC MIPS: Alchemy: Fix AU1100 interrupt numbers off-by-one Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:24 UTC
bcf1180 Kevin D. Kissell 31 March 2009, 11:10:32 UTC MIPS: SMTC: Fix xxx_clockevent_init() naming conflict for SMTC Commit 779e7d41ad004946603da139da99ba775f74cb1c created a name collision in SMTC builds. The attached patch corrects this in a a not-too-terribly-ugly manner. Note that the SMTC case has to come first, because CEVT_R4K will also be true. Signed-off-by: Kevin D. Kissell <kevink@paralogos.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:24 UTC
c34e6e8 Kevin D. Kissell 31 March 2009, 10:59:24 UTC MIPS: SMTC: Bring set/clear/change_c0_## return value semantics uptodate. Signed-off-by: Kevin D. Kissell <kevink@paralogos.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 May 2009, 12:50:24 UTC
45d4474 Linus Torvalds 14 May 2009, 00:07:28 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6: xtensa: Fix linker script to include .literal sections xtensa: update s6105_defconfig for ccount calibration xtensa: implement ccount calibration for s6000 xtensa: fix wrong extern declaration renamed in code using it xtensa: register gpio chip before use xtensa: always use correct stack pointer for stack traces xtensa: Fix checksum header file xtensa: Fix architecture specific Kconfig 14 May 2009, 00:07:28 UTC
210af91 Linus Torvalds 13 May 2009, 23:33:25 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus * git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus: Squashfs: cody tidying, remove commented out line in Makefile Squashfs: check page size is not larger than the filesystem block size Squashfs: fix breakage when page size > metadata block size 13 May 2009, 23:33:25 UTC
a6aeeeb Linus Torvalds 13 May 2009, 23:32:57 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: destroy bdi on error 13 May 2009, 23:32:57 UTC
f6cab83 Linus Torvalds 13 May 2009, 23:32:30 UTC Merge branch 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvm * 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Remove port 80 passthrough KVM: Make EFER reads safe when EFER does not exist KVM: Fix NX support reporting KVM: SVM: Fix cross vendor migration issue with unusable bit 13 May 2009, 23:32:30 UTC
014049a Linus Torvalds 13 May 2009, 23:32:16 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: check size of array structured data exchanged via ioctls nilfs2: fix lock order reversal in nilfs_clean_segments ioctl nilfs2: fix possible circular locking for get information ioctls nilfs2: ensure to clear dirty state when deleting metadata file block nilfs2: fix circular locking dependency of writer mutex nilfs2: fix possible recovery failure due to block creation without writer 13 May 2009, 23:32:16 UTC
c98861f Linus Torvalds 13 May 2009, 23:31:12 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Don't overwrite fast registration page list when posting work request RDMA/cxgb3: Don't complete flushed send work requests twice 13 May 2009, 23:31:12 UTC
0a40a55 Linus Torvalds 13 May 2009, 23:30:43 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-2.6: drm/i915: automatically select FRAMEBUFFER_CONSOLE if !EMBEDDED 13 May 2009, 23:30:43 UTC
8be741b Roland Dreier 13 May 2009, 22:16:17 UTC Merge branches 'cxgb3' and 'mlx4' into for-linus 13 May 2009, 22:16:17 UTC
0f18132 Linus Torvalds 13 May 2009, 15:29:12 UTC Revert "Ignore madvise(MADV_WILLNEED) for hugetlbfs-backed regions" This reverts commit a425a638c858fd10370b573bde81df3ba500e271. Now that the previous commit removed the "readpage" actor for hugetlb files, read-ahead will no longer mess up the mapping, and there's no longer any reason to treat hugetlbfs mappings specially. Tested-and-acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 May 2009, 15:29:12 UTC
f2deae9 Mel Gorman 13 May 2009, 14:56:10 UTC Remove implementation of readpage from the hugetlbfs_aops The core VM assumes the page size used by the address_space in inode->i_mapping is PAGE_SIZE but hugetlbfs breaks this assumption by inserting pages into the page cache at offsets the core VM considers unexpected. This would not be a problem except that hugetlbfs also provide a ->readpage implementation. As it exists, the core VM can assume the base page size is being used, allocate pages on behalf of the filesystem, insert them into the page cache and call ->readpage to populate them. These pages are the wrong size and at the wrong offset for hugetlbfs causing confusion. This patch deletes the ->readpage implementation for hugetlbfs on the grounds the core VM should not be allocating and populating pages on behalf of hugetlbfs. There should be no existing users of the ->readpage implementation so it should not cause a regression. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 May 2009, 15:04:45 UTC
e5d2875 Phillip Lougher 13 May 2009, 02:25:20 UTC Squashfs: cody tidying, remove commented out line in Makefile Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk> 13 May 2009, 02:25:20 UTC
fffb47b Phillip Lougher 13 May 2009, 01:59:26 UTC Squashfs: check page size is not larger than the filesystem block size Normally the block size (by default 128K) will be larger than the page size, unless a non-standard block size has been specified in Mksquashfs, and the page size is larger than 4K. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk> 13 May 2009, 01:59:26 UTC
a37b06d Doug Chapman 13 May 2009, 01:56:39 UTC Squashfs: fix breakage when page size > metadata block size Squashfs is broken on any system where the page size is larger than the metadata size (8192). This is easily fixed by ensuring cache->pages is always > 0. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Doug Chapman <doug.chapman@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk> 13 May 2009, 01:56:39 UTC
a4f1cb9 Linus Torvalds 13 May 2009, 00:12:54 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: add NOGET quirk for devices from CH Products HID: fix dropped device-specific quirks 13 May 2009, 00:12:54 UTC
bd99f5e Linus Torvalds 13 May 2009, 00:12:36 UTC Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dma: fix ipu_idmac.c to not discard the last queued buffer ioatdma: fix "ioatdma frees DMA memory with wrong function" ipu_idmac: Use disable_irq_nosync() from within irq handlers. dmatest: fix max channels handling 13 May 2009, 00:12:36 UTC
2ea3f86 Linus Torvalds 13 May 2009, 00:11:56 UTC Merge branch 'for-2.6.30' of git://linux-nfs.org/~bfields/linux * 'for-2.6.30' of git://linux-nfs.org/~bfields/linux: nfsd: silence lockdep warning lockd: fix list corruption on lockd restart nfsd4: check for negative dentry before use in nfsv4 readdir nfsd41: slots are freed with session svcrdma: clean up error paths. svcrdma: Fix dma map direction for rdma read targets 13 May 2009, 00:11:56 UTC
ad567ff Guennadi Liakhovetski 12 May 2009, 07:16:29 UTC dma: fix ipu_idmac.c to not discard the last queued buffer This also fixes the case of a single queued buffer, for example, when taking a single frame snapshot with the mx3_camera driver. Reported-by: Agustin Ferrin Pozuelo <gatoguan-os@yahoo.com> Tested-by: Agustin Ferrin Pozuelo <gatoguan-os@yahoo.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 12 May 2009, 21:41:48 UTC
4f005db Maciej Sosnowski 23 April 2009, 10:31:51 UTC ioatdma: fix "ioatdma frees DMA memory with wrong function" as reported by Alexander Beregalov <a.beregalov@gmail.com> ioatdma 0000:00:08.0: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000007f76f800] [size=2000 bytes] [map ped as single] [unmapped as page] The ioatdma driver was unmapping all regions (either allocated as page or single) using unmap_page. This patch lets dma driver recognize if unmap_single or unmap_page should be used. It introduces two new dma control flags: DMA_COMPL_SRC_UNMAP_SINGLE and DMA_COMPL_DEST_UNMAP_SINGLE. They should be set to indicate dma driver to do dma-unmapping as single (first one for the source, tha latter for the destination). If respective flag is not set, the driver assumes dma-unmapping as page. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Tested-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 12 May 2009, 21:41:47 UTC
bfe3891 Davide Libenzi 12 May 2009, 20:19:44 UTC epoll: fix size check in epoll_create() Fix a size check WRT the manual pages. This was inadvertently broken by commit 9fe5ad9c8cef9ad5873d8ee55d1cf00d9b607df0 ("flag parameters add-on: remove epoll_create size param"). Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: <Hiroyuki.Mach@gmail.com> Cc: rohit verma <rohit.170309@gmail.com> Cc: Ulrich Drepper <drepper@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 May 2009, 21:11:35 UTC
ee1ef82 Harald Welte 12 May 2009, 20:19:42 UTC viafb: make it work on x86_64 Fix a bug in viafb on x86_64 builds (e.g. for VIA Nano CPU). You cannot make the assumption that sizeof(unsigned int) == sizeof(unsigned long), so the parsing of the default mode (640x480) fails, leading to a division by zero during insmod of the driver. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Cc: <JosephChan@via.com.tw> Cc: <ScottFang@viatech.com.cn> Cc: Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 May 2009, 21:11:35 UTC
ee83126 Jean Delvare 12 May 2009, 20:19:41 UTC fbdev: remove outdated advice about I2C configuration The required I2C modules are now selected automatically by the means of select statements in Kconfig, so there is no point in confusing the users with options he/she would be supposed to enable manually. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 May 2009, 21:11:35 UTC
9aa7a7d Tejun Heo 12 May 2009, 20:19:39 UTC alpha: unbreak percpu again Commit 9b8de7479d0dbab1ed98b5b015d44232c9d3d08e ("FRV: Fix the section attribute on UP DECLARE_PER_CPU()") cleaned up DECLARE/DEFINE_PER_CPU() macros and in the process made alpha percpu.h include include/asm-generic/percpu.h which breaks compilation due to duplicate definitions. Remove inclusion of generic asm helper file and define whatever necessary in alpha header proper. In the longer term, percpu definitions will be unified and all these little subtlties will be removed. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: David Howells <dhowells@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 May 2009, 21:11:35 UTC
f993004 Kim Kyuwon 12 May 2009, 20:19:38 UTC rtc: rtc-twl4030 don't mask alarm interrupts on suspend This patch enables the alarm interrupt of TWL4030 RTC to wake up the system from suspend. You can test this patch with following command. # echo +10 > /sys/class/rtc/rtc0/wakealarm; echo mem > /sys/power/state; Signed-off-by: Kim Kyuwon <q1.kim@samsung.com> Acked-by: David Brownell <david-b@pacbell.net> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 May 2009, 21:11:35 UTC
ecf4667 Arnd Bergmann 12 May 2009, 20:19:37 UTC syscalls.h add the missing sys_pipe2 declaration In order to build the generic syscall table, we need a declaration for every system call. sys_pipe2 was added without a proper declaration, so add this to syscalls.h now. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 May 2009, 21:11:35 UTC
7348d82 Daniel Ribeiro 12 May 2009, 20:19:36 UTC pxa2xx_spi: prevent panic case setup() fails setup() may fail before ctldata is set, causing a kernel panic on cleanup(). Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 May 2009, 21:11:34 UTC
816dc3c Linus Torvalds 12 May 2009, 18:21:51 UTC Merge branch 'i2c-for-2630-rc5' of git://aeryn.fluff.org.uk/bjdooks/linux * 'i2c-for-2630-rc5' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c-cpm: Pass dev ptr to dma_*_coherent rather than NULL i2c: Enable i2c-s3c2410 for S3C64XX too i2c-mpc: bug fix for MPC52xx clock setting and printout i2c-pxa.c: timeouts off by 1 12 May 2009, 18:21:51 UTC
3b4334e Linus Torvalds 12 May 2009, 18:21:24 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: tsc2007 - fix locking in hrtimer handler Input: atkbd - add force release keys quirk for Amilo Xi 3650 Input: ff-memless - fix signed to unsigned bit overflow Input: joydev - blacklist digitizers 12 May 2009, 18:21:24 UTC
f29ce72 Jesse Barnes 12 May 2009, 16:08:31 UTC drm/i915: automatically select FRAMEBUFFER_CONSOLE if !EMBEDDED People keep getting bitten by this, so just auto-select it by default, assuming most configurations will actually want a console. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> 12 May 2009, 16:08:31 UTC
34fd5da Dan Carpenter 12 May 2009, 10:33:39 UTC Remove unreached code in drivers/net/mlx4/en_rx.c Remove the return after the goto. We want the goto because it frees memory as well as returning err. Found by smatch (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 May 2009, 14:38:09 UTC
78f3cdf Chris Zankel 21 April 2009, 07:34:15 UTC xtensa: Fix linker script to include .literal sections Fix resembles implementation from Marc Gauthier and Piet Denaly: In the Xtensa architecture, assembly generates literals which must always precede the code (the L32R instruction that loads them only uses negative PC-relative offsets). For any *.text section, literals are placed in a corresponding *.literal section. The linker script (vmlinux.lds) must place these in the correct order. It must also combine them, when the *.text section can be larger than L32R's 256 kB range. For example, this doesn't work: *(.literal) *(.text) because L32R instructions at the end of .text can't reach the literals. The linker can solve this if they are combined in parentheses, like this: *(.literal .text) because it is now allowed mix literals in .text to bring them in range. None of this is done by standard vmlinux.lds.h macros such as TEXT_TEXT and INIT_TEXT. To avoid replicating the logic of that header file, we instead post-process the generated linker script to convert *(xxx.text) to *(xxx.literal xxx.text) for the following text sections: .text .ref.text .*init.text .*exit.text .text.* using a sed script. To do this we must override the default rule for vmlinux.lds (see scripts/Makefile.build and the top-level Makefile) to insert this extra step. Signed-off-by: Marc Gauthier <marc@tensilica.com> Signed-off-by: Pete Delaney <piet@tensilica.com> Signed-off-by: Chris Zankel <chris@zankel.net> 12 May 2009, 06:40:33 UTC
866e514 Oskar Schirmer 11 May 2009, 13:43:37 UTC xtensa: update s6105_defconfig for ccount calibration The previous patch enabled ccount calibration for the s6000 variant. This patch updates the defconfig for the s6105 platform to reflect this change. Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net> 12 May 2009, 05:00:22 UTC
b070a03 Oskar Schirmer 11 May 2009, 13:43:36 UTC xtensa: implement ccount calibration for s6000 Calculate core frequency from timers at boot time instead of assuming a fixed frequency. This is useful as the true frequency is set up by the boot loader, thus variable. Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net> 12 May 2009, 05:00:17 UTC
d15f05e Oskar Schirmer 11 May 2009, 13:43:35 UTC xtensa: fix wrong extern declaration renamed in code using it The variable ccount_nsec has been renamed to nsec_per_ccount in arch/xtensa/kernel/time.c in 2b8aea74 (2007-08-05), but the fix failed to rename the variable in arch/xtensa/include/asm/timex.h as well. Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net> 12 May 2009, 05:00:11 UTC
1fb137c Johannes Weiner 11 May 2009, 13:43:34 UTC xtensa: register gpio chip before use Platform initialization sets up the LED heartbeat that is controlled via GPIO. Requesting the GPIO pins fails, however, as the chip is only initialized later by a device_initcall(). Fix this up by exporting the initialization function. Let the platform set up the chip before it starts using it. Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net> 12 May 2009, 05:00:07 UTC
586411d Johannes Weiner 11 May 2009, 13:43:33 UTC xtensa: always use correct stack pointer for stack traces Commit '28a0ce7 xtensa: use correct stack pointer for stack traces' changed the stack tracer from always reading the stack pointer register to always using the saved value in the task descriptor. The author was too dense to consider the fact that the saved stack value is stale for a running process und thus unusable for 'current'. What we do now is to use the stack pointer register (a1) for when the task is unknown - we can't help it then - or when the task is 'current'. For everything else use the saved stack pointer value contained in the task descriptor. Signed-off-by: Johannes Weiner <jw@emlix.com> Signed-off-by: Chris Zankel <chris@zankel.net> 12 May 2009, 04:59:43 UTC
7dbe5c5 Chris Zankel 16 April 2009, 07:28:09 UTC xtensa: Fix checksum header file We need to add a "memory" dependency (barrier) in assembly macros that access (read or write) memory. Otherwise, the compiler might ill-optimize the order of memory accesses. Signed-off-by: Chris Zankel <chris@zankel.net> 12 May 2009, 04:48:23 UTC
35e71f9 Chris Zankel 16 April 2009, 07:25:39 UTC xtensa: Fix architecture specific Kconfig Move a misplace endmenu marker to enable platform options and disable PCI and automatic calibrating for the XT2K board. The on-board PCI bridge is somewhat broken, anyway, and the calibrating relies on some whacky usage of the serial port. Signed-off-by: Chris Zankel <chris@zankel.net> 12 May 2009, 04:48:17 UTC
36521c2 Mark Ware 21 April 2009, 12:49:02 UTC i2c-cpm: Pass dev ptr to dma_*_coherent rather than NULL Recent DMA changes result in a BUG() when NULL is passed to dma_alloc_coherent in place of a device. Signed-off-by: Mark Ware <mware@elphinstone.net> [ben-linux@fluff.org: fix patch moves] Signed-off-by: Ben Dooks <ben-linux@fluff.org> 11 May 2009, 23:36:04 UTC
89bc5d4 Mark Brown 09 April 2009, 16:03:24 UTC i2c: Enable i2c-s3c2410 for S3C64XX too This controller is also present on the S3C64xx series processors so enable the driver in Kconfig for those platforms. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 11 May 2009, 23:36:03 UTC
1904b03 Wolfgang Grandegger 09 April 2009, 09:59:52 UTC i2c-mpc: bug fix for MPC52xx clock setting and printout The clock setting did not work for the MPC52xx due to a stupid bug. Furthermore, the dev info output "clock=0" for old device trees was misleading. This patch fixes both issues. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 11 May 2009, 23:35:56 UTC
705a76d Thierry Reding 11 May 2009, 15:36:39 UTC Input: tsc2007 - fix locking in hrtimer handler Now that hrtimers are always running in hard irq context we can't unconditionally enable interrupts at the end of the timer function. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> 11 May 2009, 22:35:48 UTC
9166d0f Adrian Batzill 11 May 2009, 22:22:16 UTC Input: atkbd - add force release keys quirk for Amilo Xi 3650 Signed-off-by: Adrian Batzill <agib@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> 11 May 2009, 22:30:45 UTC
8daed1e J. Bruce Fields 11 May 2009, 20:10:19 UTC nfsd: silence lockdep warning Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> 11 May 2009, 21:23:14 UTC
1d80cac Linus Torvalds 11 May 2009, 19:43:41 UTC Merge branch 'for-linus' of git://repo.or.cz/cris-mirror * 'for-linus' of git://repo.or.cz/cris-mirror: CRISv32: Fix typo compile error in ARTPEC-3 gpio driver. CRIS: Wire up syscalls signalfd4 to writev. CRISv32: Remove obsolete vcs_hook.o from Makefile CRIS: Merge machine dependent boot/compressed and boot/rescue 11 May 2009, 19:43:41 UTC
7b5ca22 Linus Torvalds 11 May 2009, 19:42:55 UTC Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_piix: The Sony TZ90 needs the cable type hardcoding ata_piix: ICH7 does not support correct MWDMA timings Avoid world-writable sysfs files in libata driver. libata: fix suspend/resume for ATA SEMB devices libata: clear ering on resume pata_pdc202xx_old: fix UDMA33 handling sata_mv: use new sata phy register settings for new devices libata: fix attach error handling 11 May 2009, 19:42:55 UTC
2b79bc4 Jeff Mahoney 11 May 2009, 18:25:34 UTC dup2: Fix return value with oldfd == newfd and invalid fd The return value of dup2 when oldfd == newfd and the fd isn't valid is not getting properly sign extended. We end up with 4294967287 instead of -EBADF. I've reproduced this on SLE11 (2.6.27.21), openSUSE Factory (2.6.29-rc5), and Ubuntu 9.04 (2.6.28). This patch uses a signed int for the error value so it is properly extended. Commit 6c5d0512a091480c9f981162227fdb1c9d70e555 introduced this regression. Reported-by: Jiri Dluhos <jdluhos@novell.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 May 2009, 19:18:06 UTC
124a6ee Alan Cox 06 May 2009, 16:09:41 UTC ata_piix: The Sony TZ90 needs the cable type hardcoding The Sony TZ90 needs the cable type hardcoding. See bug #12734 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 11 May 2009, 18:31:36 UTC
c611bed Alan Cox 06 May 2009, 16:08:44 UTC ata_piix: ICH7 does not support correct MWDMA timings See Errata documentation. The recommended workaround is to use PIO4 instead which will we automatically do by flagging this mode not available. Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 11 May 2009, 18:31:34 UTC
ea7a5ed Vitaly Mayatskikh 04 May 2009, 13:48:45 UTC Avoid world-writable sysfs files in libata driver. Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 11 May 2009, 18:31:31 UTC
f0d0613 Borislav Petkov 26 April 2009, 14:33:34 UTC libata: fix suspend/resume for ATA SEMB devices 79b42babbac2a5a522b8e269fb2811b6e1063030 fixed identifying ATA devices reporting 3c/c3 signature which belongs to SEMB devices now. However, suspending the machine with such device (WDC WD2500AAJS-6 01.0) fails with the following: hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/66 mode selected sd 1:0:0:0: [sda] Starting disk ata5: SATA link down (SStatus 0 SControl 300) ata1: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata2: softreset failed (device not ready) ata2: failed due to HW bug, retry pmp=0 ata4: softreset failed (device not ready) ata4: failed due to HW bug, retry pmp=0 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: class mismatch 1 != 7 ata2.00: revalidation failed (errno=-19) ata2: limiting SATA link speed to 1.5 Gbps ata4.00: configured for UDMA/133 ata2: softreset failed (device not ready) ata2: failed due to HW bug, retry pmp=0 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: class mismatch 1 != 7 ata2.00: revalidation failed (errno=-19) ata2.00: disabled sd 1:0:0:0: rejecting I/O to offline device sd 1:0:0:0: [sda] START_STOP FAILED sd 1:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00 PM: Device 1:0:0:0 failed to thaw: error 65536 sd 3:0:0:0: [sdb] Starting disk due to a class mismatch in ata_dev_revalidate(). Fix it by adding the ATA_DEV_SEMB device class to the check. CC: Tejun Heo <htejun@gmail.com> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 11 May 2009, 18:31:10 UTC
6f9c1ea Tejun Heo 23 April 2009, 00:55:28 UTC libata: clear ering on resume Error timestamps are in jiffies which doesn't run while suspended and PHY events during resume isn't too uncommon. When the two are combined, it can lead to unnecessary speed downs if the machine is suspended and resumed repeatedly. Clear error history on resume. This was reported and verified in bnc#486803 by Vladimir Botka. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Vladimir Botka <vbotka@novell.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 11 May 2009, 18:30:59 UTC
6ad58b2 Bartlomiej Zolnierkiewicz 20 April 2009, 20:31:25 UTC pata_pdc202xx_old: fix UDMA33 handling The original driver doesn't use 66 MHz clock for UDMA33. [ The alternative solution would be to adjust UDMA33 timings for 66 MHz clock but I think that it is safer to stick with old & tested behavior for now. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 11 May 2009, 18:30:07 UTC
29b7e43 Martin Michlmayr 04 May 2009, 18:58:50 UTC sata_mv: use new sata phy register settings for new devices Marvell's new SoC (65 nano) needs different settings for its SATA PHY registers. Tested-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 11 May 2009, 18:29:41 UTC
842faa6 Tejun Heo 09 May 2009, 16:06:54 UTC libata: fix attach error handling New device attach path in ata_eh_revalidate_and_attach() is divided into two separate loops because ATA requires IDENTIFY to be issued to slave first while the user expects to see device probe messages from the master device. new_mask is used to track which devices are the new ones between the first loop and the second. This usually works well but if an error occurs during configuration stage, ata_dev_revalidate_and_attach() returns with error code and forgets new_mask. On the retry run, dev->class is set and new_mask for the device is clear, so the device just gets revalidated and thus ends up skipping post-configuration procedure including scheduling of SCSI_HOTPLUG for the device. When this occurs, ATA part of probing works fine but SCSI probing usually doesn't happen and makes the device unreachable. The behavior has been around for a very long time but it has been uncovered with the recent addition of 1_5_GBPS horkage which uses -EAGAIN return value from ata_dev_configure() to restart the probing sequence after forcing cable speed. This can be fixed by making sure dev->class is permanently set only after all configurations are successfully complete. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Tim Connors <tconnors+linuxkml@astro.swin.edu.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 11 May 2009, 18:26:01 UTC
83aca8f Ryusuke Konishi 11 May 2009, 14:24:47 UTC nilfs2: check size of array structured data exchanged via ioctls Although some ioctls of nilfs2 exchange data in the form of indirectly referenced array, some of them lack size check on the array elements. This inserts the missing checks and rejects requests if data of ioctl does not have a valid format. We usually don't have to check size of structures that we associated with ioctl commands because the size is tested implicitly for identifying ioctl command; the checks this patch adds are for the cases where the implicit check is not applied. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> 11 May 2009, 16:48:54 UTC
b820aab Alan Stern 06 May 2009, 19:48:49 UTC HID: add NOGET quirk for devices from CH Products This patch (as1240) adds the NOGET quirk for three devices from CH Products: the Pro pedals, the Combatstick joystick, and the Flight-Sim yoke. Without these quirks, the devices haven't worked for many kernel releases. Sometimes replugging them after boot-up would get them to work and sometimes they wouldn't work at all. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Sean Hildebrand <silverwraithii@gmail.com> Reported-by: Sid Boyce <sboyce@blueyonder.co.uk> Tested-by: Sean Hildebrand <silverwraithii@gmail.com> Tested-by: Sid Boyce <sboyce@blueyonder.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 11 May 2009, 15:09:21 UTC
f520899 Zoltan Karcagi 06 May 2009, 14:30:21 UTC HID: fix dropped device-specific quirks Device-specific quirks are set up correctly in their respective vendor-specific driver, then get overwritten in usbhid_parse(). This is only issue for device-specific NOGET quirks being set by driver for a few devices out there. Signed-off-by: Zoltan Karcagi <zkr@freemail.hu> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 11 May 2009, 15:09:17 UTC
fd18de5 David Woodhouse 10 May 2009, 22:57:41 UTC intel-iommu: PAE memory corruption fix PAGE_MASK is 0xFFFFF000 on i386 -- even with PAE. So it's not sufficient to ensure that you use phys_addr_t or uint64_t everywhere you handle physical addresses -- you also have to avoid using the construct 'addr & PAGE_MASK', because that will strip the high 32 bits of the address. This patch avoids that problem by using PHYSICAL_PAGE_MASK instead of PAGE_MASK where appropriate. It leaves '& PAGE_MASK' in a few instances that don't matter -- where it's being used on the virtual bus addresses we're dishing out, which are 32-bit anyway. Since PHYSICAL_PAGE_MASK is not present on other architectures, we have to define it (to PAGE_MASK) if it's not already defined. Maybe it would be better just to fix PAGE_MASK for i386/PAE? Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 May 2009, 14:51:01 UTC
99f85a2 Avi Kivity 11 May 2009, 11:21:10 UTC KVM: SVM: Remove port 80 passthrough KVM optimizes guest port 80 accesses by passthing them through to the host. Some AMD machines die on port 80 writes, allowing the guest to hard-lock the host. Remove the port passthrough to avoid the problem. Cc: stable@kernel.org Reported-by: Piotr Jaroszyński <p.jaroszynski@gmail.com> Tested-by: Piotr Jaroszyński <p.jaroszynski@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com> 11 May 2009, 11:40:51 UTC
e286e86 Avi Kivity 03 May 2009, 15:50:55 UTC KVM: Make EFER reads safe when EFER does not exist Some processors don't have EFER; don't oops if userspace wants us to read EFER when we check NX. Cc: stable@kernel.org Signed-off-by: Avi Kivity <avi@redhat.com> 11 May 2009, 08:19:00 UTC
334b8ad Avi Kivity 03 May 2009, 13:34:21 UTC KVM: Fix NX support reporting NX support is bit 20, not bit 1. Signed-off-by: Avi Kivity <avi@redhat.com> 11 May 2009, 08:18:48 UTC
19bca6a Andre Przywara 28 April 2009, 10:45:30 UTC KVM: SVM: Fix cross vendor migration issue with unusable bit AMDs VMCB does not have an explicit unusable segment descriptor field, so we emulate it by using "not present". This has to be setup before the fixups, because this field is used there. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com> 11 May 2009, 08:18:04 UTC
4f6b828 Ryusuke Konishi 10 May 2009, 13:41:43 UTC nilfs2: fix lock order reversal in nilfs_clean_segments ioctl This is a companion patch to ("nilfs2: fix possible circular locking for get information ioctls"). This corrects lock order reversal between mm->mmap_sem and nilfs->ns_segctor_sem in nilfs_clean_segments() which was detected by lockdep check: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.30-rc3-nilfs-00003-g360bdc1 #7 ------------------------------------------------------- mmap/5294 is trying to acquire lock: (&nilfs->ns_segctor_sem){++++.+}, at: [<d0d0e846>] nilfs_transaction_begin+0xb6/0x10c [nilfs2] but task is already holding lock: (&mm->mmap_sem){++++++}, at: [<c043700a>] do_page_fault+0x1d8/0x30a which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mm->mmap_sem){++++++}: [<c01470a5>] __lock_acquire+0x1066/0x13b0 [<c01474a9>] lock_acquire+0xba/0xdd [<c01836bc>] might_fault+0x68/0x88 [<c023c61d>] copy_from_user+0x2a/0x111 [<d0d120d0>] nilfs_ioctl_prepare_clean_segments+0x1d/0xf1 [nilfs2] [<d0d0e2aa>] nilfs_clean_segments+0x6d/0x1b9 [nilfs2] [<d0d11f68>] nilfs_ioctl+0x2ad/0x318 [nilfs2] [<c01a3be7>] vfs_ioctl+0x22/0x69 [<c01a408e>] do_vfs_ioctl+0x460/0x499 [<c01a4107>] sys_ioctl+0x40/0x5a [<c01031a4>] sysenter_do_call+0x12/0x38 [<ffffffff>] 0xffffffff -> #0 (&nilfs->ns_segctor_sem){++++.+}: [<c0146e0b>] __lock_acquire+0xdcc/0x13b0 [<c01474a9>] lock_acquire+0xba/0xdd [<c0433f1d>] down_read+0x2a/0x3e [<d0d0e846>] nilfs_transaction_begin+0xb6/0x10c [nilfs2] [<d0cfe0e5>] nilfs_page_mkwrite+0xe7/0x154 [nilfs2] [<c0183b0b>] __do_fault+0x165/0x376 [<c01855cd>] handle_mm_fault+0x287/0x5d1 [<c043712d>] do_page_fault+0x2fb/0x30a [<c0435462>] error_code+0x72/0x78 [<ffffffff>] 0xffffffff where nilfs_clean_segments() holds: nilfs->ns_segctor_sem -> copy_from_user() --> page fault -> mm->mmap_sem And, page fault path may hold: page fault -> mm->mmap_sem --> nilfs_page_mkwrite() -> nilfs->ns_segctor_sem Even though nilfs_clean_segments() does not perform write access on given user pages, it may cause deadlock because nilfs->ns_segctor_sem is shared per device and mm->mmap_sem can be shared with other tasks. To avoid this problem, this patch moves all calls of copy_from_user() outside the nilfs->ns_segctor_sem lock in the ioctl. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> 11 May 2009, 05:54:41 UTC
47eb6b9 Ryusuke Konishi 29 April 2009, 17:21:00 UTC nilfs2: fix possible circular locking for get information ioctls This is one of two patches which are to correct possible circular locking between mm->mmap_sem and nilfs->ns_segctor_sem. The problem was detected by lockdep check as follows: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.30-rc3-nilfs-00002-g3552613 #6 ------------------------------------------------------- mmap/5418 is trying to acquire lock: (&nilfs->ns_segctor_sem){++++.+}, at: [<d0d0e852>] nilfs_transaction_begin+0xb6/0x10c [nilfs2] but task is already holding lock: (&mm->mmap_sem){++++++}, at: [<c043700a>] do_page_fault+0x1d8/0x30a which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mm->mmap_sem){++++++}: [<c01470a5>] __lock_acquire+0x1066/0x13b0 [<c01474a9>] lock_acquire+0xba/0xdd [<c01836bc>] might_fault+0x68/0x88 [<c023c730>] copy_to_user+0x2c/0xfc [<d0d11b4f>] nilfs_ioctl_wrap_copy+0x103/0x160 [nilfs2] [<d0d11fa9>] nilfs_ioctl+0x30a/0x3b0 [nilfs2] [<c01a3be7>] vfs_ioctl+0x22/0x69 [<c01a408e>] do_vfs_ioctl+0x460/0x499 [<c01a4107>] sys_ioctl+0x40/0x5a [<c01031a4>] sysenter_do_call+0x12/0x38 [<ffffffff>] 0xffffffff -> #0 (&nilfs->ns_segctor_sem){++++.+}: [<c0146e0b>] __lock_acquire+0xdcc/0x13b0 [<c01474a9>] lock_acquire+0xba/0xdd [<c0433f1d>] down_read+0x2a/0x3e [<d0d0e852>] nilfs_transaction_begin+0xb6/0x10c [nilfs2] [<d0cfe0e5>] nilfs_page_mkwrite+0xe7/0x154 [nilfs2] [<c0183b0b>] __do_fault+0x165/0x376 [<c01855cd>] handle_mm_fault+0x287/0x5d1 [<c043712d>] do_page_fault+0x2fb/0x30a [<c0435462>] error_code+0x72/0x78 [<ffffffff>] 0xffffffff other info that might help us debug this: 1 lock held by mmap/5418: #0: (&mm->mmap_sem){++++++}, at: [<c043700a>] do_page_fault+0x1d8/0x30a stack backtrace: Pid: 5418, comm: mmap Not tainted 2.6.30-rc3-nilfs-00002-g3552613 #6 Call Trace: [<c0432145>] ? printk+0xf/0x12 [<c0145c48>] print_circular_bug_tail+0xaa/0xb5 [<c0146e0b>] __lock_acquire+0xdcc/0x13b0 [<d0d10149>] ? nilfs_sufile_get_stat+0x1e/0x105 [nilfs2] [<c013b59a>] ? up_read+0x16/0x2c [<d0d10225>] ? nilfs_sufile_get_stat+0xfa/0x105 [nilfs2] [<c01474a9>] lock_acquire+0xba/0xdd [<d0d0e852>] ? nilfs_transaction_begin+0xb6/0x10c [nilfs2] [<c0433f1d>] down_read+0x2a/0x3e [<d0d0e852>] ? nilfs_transaction_begin+0xb6/0x10c [nilfs2] [<d0d0e852>] nilfs_transaction_begin+0xb6/0x10c [nilfs2] [<d0cfe0e5>] nilfs_page_mkwrite+0xe7/0x154 [nilfs2] [<c0183b0b>] __do_fault+0x165/0x376 [<c01855cd>] handle_mm_fault+0x287/0x5d1 [<c043700a>] ? do_page_fault+0x1d8/0x30a [<c013b54f>] ? down_read_trylock+0x39/0x43 [<c043712d>] do_page_fault+0x2fb/0x30a [<c0436e32>] ? do_page_fault+0x0/0x30a [<c0435462>] error_code+0x72/0x78 [<c0436e32>] ? do_page_fault+0x0/0x30a This makes the lock granularity of nilfs->ns_segctor_sem finer than that of the mmap semaphore for ioctl commands except nilfs_clean_segments(). The successive patch ("nilfs2: fix lock order reversal in nilfs_clean_segments ioctl") is required to fully resolve the problem. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> 11 May 2009, 03:57:46 UTC
a4d7749 Linus Torvalds 10 May 2009, 17:49:53 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: comedi: David doesn't want to get comedi patches Staging: rtl8187se: Fix compilation warnings and procfs directory leak Staging: rt2870: new device id Staging: w35und: unregister device from the ieee80211 stack upon ->disconnect() 10 May 2009, 17:49:53 UTC
6580cd5 Linus Torvalds 10 May 2009, 17:49:41 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: usb-serial: ftdi_sio: fix reference counting of ftdi_private USB: unusual_devs: extend nokia 6288 bcd range USB: Gadget: fix UTF conversion in the usbstring library USB: Fix makefile so that CONFIG_WDM and CONFIG_TMC work. USB: ftdi_sio: add vendor/product id for the Marvell SheevaPlug USB: cxacru: Fix negative dB output 10 May 2009, 17:49:41 UTC
back to top