swh:1:snp:77163734605b0ec556b01d897b7bb4a7e30d46b6

sort by:
Revision Author Date Message Commit Date
610603a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: "Fix a regression and update the MAINTAINERS entry for fuse" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: update mailing list in MAINTAINERS fuse: Fix return value from fuse_get_user_pages() 03 May 2016, 21:23:58 UTC
1248ded Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: "Fixes for the HID subsystem: - regression fix for Wacom driver; commit introduced in 4.6-rc1 mistakenly removed line that should be kept. Fix by Ping Cheng - two device-specific quirks, by Ping Cheng and Nazar Mokrynskyi" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wacom: add missed stylus_in_proximity line back HID: Fix boot delay for Creative SB Omni Surround 5.1 with quirk HID: wacom: Add support for DTK-1651 03 May 2016, 18:06:01 UTC
1f6211a Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One small bug fix for the imx6qp CAN clk definition that was causing failures and division by zeros in the kernel on those devices" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: imx6q: fix typo in CAN clock definition 03 May 2016, 17:58:29 UTC
eff6ca9 HID: wacom: add missed stylus_in_proximity line back Commit 7e12978 ("HID: wacom: break out wacom_intuos_get_tool_type") by accident removed stylus_in_proximity flag for Intuos series while shuffling the code around. Fix that by reintroducing that flag setting in wacom_intuos_inout(), where it originally was. Fixes: 7e12978 ("HID: wacom: break out wacom_intuos_get_tool_type") Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 03 May 2016, 10:03:44 UTC
4441f63 fuse: update mailing list in MAINTAINERS The fuse mailing list seems not to be open anymore. The discussion on fuse-devel@... is mostly userspace related anyway. Reported-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> 03 May 2016, 09:19:33 UTC
689de1d Minimal fix-up of bad hashing behavior of hash_64() This is a fairly minimal fixup to the horribly bad behavior of hash_64() with certain input patterns. In particular, because the multiplicative value used for the 64-bit hash was intentionally bit-sparse (so that the multiply could be done with shifts and adds on architectures without hardware multipliers), some bits did not get spread out very much. In particular, certain fairly common bit ranges in the input (roughly bits 12-20: commonly with the most information in them when you hash things like byte offsets in files or memory that have block factors that mean that the low bits are often zero) would not necessarily show up much in the result. There's a bigger patch-series brewing to fix up things more completely, but this is the fairly minimal fix for the 64-bit hashing problem. It simply picks a much better constant multiplier, spreading the bits out a lot better. NOTE! For 32-bit architectures, the bad old hash_64() remains the same for now, since 64-bit multiplies are expensive. The bigger hashing cleanup will replace the 32-bit case with something better. The new constants were picked by George Spelvin who wrote that bigger cleanup series. I just picked out the constants and part of the comment from that series. Cc: stable@vger.kernel.org Cc: George Spelvin <linux@horizon.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 May 2016, 20:01:51 UTC
98bcf28 Merge tag 'md/4.6-rc6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md Pull MD fixes from Shaohua Li: "This update includes several trival fixes. The only important one is to fix MD bio merge, which has big performance impact" * tag 'md/4.6-rc6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: raid5: delete unnecessary warnning MD: make bio mergeable md/raid0: remove empty line printk from dump_zones md/raid0: fix uninitialized variable bug 02 May 2016, 19:22:51 UTC
33656a1 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF fix from Jan Kara: "A fix of a regression in UDF that got introduced in 4.6-rc1 by one of the charset encoding fixes" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fix conversion of 'dstring' fields to UTF8 02 May 2016, 16:59:57 UTC
5f40adb Merge tag 'gpio-v4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here are some late but important fixes for the v4.6 kernel series. ACPI and RCAR, so two driver fixes (PM related) and a self-evident string lookup fix for ACPI GPIOs: - A serious ACPI fix targeted for stable: lookup strings were being free'd. - Revert two patches from the RCAR driver" * tag 'gpio-v4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpiolib-acpi: Duplicate con_id string when adding it to the crs lookup list Revert "gpio: rcar: Fine-grained Runtime PM support" Revert "gpio: rcar: Add Runtime PM handling for interrupts" 02 May 2016, 16:54:22 UTC
9c5d1bc Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) MODULE_FIRMWARE firmware string not correct for iwlwifi 8000 chips, from Sara Sharon. 2) Fix SKB size checks in batman-adv stack on receive, from Sven Eckelmann. 3) Leak fix on mac80211 interface add error paths, from Johannes Berg. 4) Cannot invoke napi_disable() with BH disabled in myri10ge driver, fix from Stanislaw Gruszka. 5) Fix sign extension problem when computing feature masks in net_gso_ok(), from Marcelo Ricardo Leitner. 6) lan78xx driver doesn't count packets and packet lengths in its statistics properly, fix from Woojung Huh. 7) Fix the buffer allocation sizes in pegasus USB driver, from Petko Manolov. 8) Fix refcount overflows in bpf, from Alexei Starovoitov. 9) Unified dst cache handling introduced a preempt warning in ip_tunnel, fix by resetting rather then setting the cached route. From Paolo Abeni. 10) Listener hash collision test fix in soreuseport, from Craig Gallak * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) gre: do not pull header in ICMP error processing net: Implement net_dbg_ratelimited() for CONFIG_DYNAMIC_DEBUG case tipc: only process unicast on intended node cxgb3: fix out of bounds read net/smscx5xx: use the device tree for mac address soreuseport: Fix TCP listener hash collision net: l2tp: fix reversed udp6 checksum flags ip_tunnel: fix preempt warning in ip tunnel creation/updating samples/bpf: fix trace_output example bpf: fix check_map_func_compatibility logic bpf: fix refcnt overflow drivers: net: cpsw: use of_phy_connect() in fixed-link case dt: cpsw: phy-handle, phy_id, and fixed-link are mutually exclusive drivers: net: cpsw: don't ignore phy-mode if phy-handle is used drivers: net: cpsw: fix segfault in case of bad phy-handle drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac config MAINTAINERS: net: Change maintainer for GRETH 10/100/1G Ethernet MAC device driver gre: reject GUE and FOU in collect metadata mode pegasus: fixes reported packet length pegasus: fixes URB buffer allocation size; ... 02 May 2016, 16:40:42 UTC
ba22906 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull sparc fixes from David Miller: 1) Fix panics with SR-IOV, from Babu Moger. 2) Wire up preadv2/pwritev2. 3) Allow proper auto-loading of VIO devices, from John Paul Adrian Glaubitz. 4) Recognize Sonoma cpus, from Khalid Aziz. 5) Fix bootup regressions caused by syscall trace fixes made recently. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix bootup regressions on some Kconfig combinations. sparc64: recognize and support Sonoma CPU type sparc: Implement and wire up vio_hotplug for vio. sparc: Implement and wire up modalias_show for vio. sparc/pci: Refactor dev_archdata initialization into pci_init_dev_archdata sparc/defconfigs: Remove CONFIG_IPV6_PRIVACY sparc: Write up preadv2/pwritev2 syscalls. sparc/PCI: Fix for panic while enabling SR-IOV 02 May 2016, 16:32:50 UTC
b7f8fe2 gre: do not pull header in ICMP error processing iptunnel_pull_header expects that IP header was already pulled; with this expectation, it pulls the tunnel header. This is not true in gre_err. Furthermore, ipv4_update_pmtu and ipv4_redirect expect that skb->data points to the IP header. We cannot pull the tunnel header in this path. It's just a matter of not calling iptunnel_pull_header - we don't need any of its effects. Fixes: bda7bb463436 ("gre: Allow multiple protocol listener for gre protocol.") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 May 2016, 04:19:58 UTC
2c94b53 net: Implement net_dbg_ratelimited() for CONFIG_DYNAMIC_DEBUG case Prior to commit d92cff89a0c8 ("net_dbg_ratelimited: turn into no-op when !DEBUG") the implementation of net_dbg_ratelimited() was buggy for both the DEBUG and CONFIG_DYNAMIC_DEBUG cases. The bug was that net_ratelimit() was being called and, despite returning true, nothing was being printed to the console. This resulted in messages like the following - "net_ratelimit: %d callbacks suppressed" with no other output nearby. After commit d92cff89a0c8 ("net_dbg_ratelimited: turn into no-op when !DEBUG") the bug is fixed for the DEBUG case. However, there's no output at all for CONFIG_DYNAMIC_DEBUG case. This patch restores debug output (if enabled) for the CONFIG_DYNAMIC_DEBUG case. Add a definition of net_dbg_ratelimited() for the CONFIG_DYNAMIC_DEBUG case. The implementation takes care to check that dynamic debugging is enabled before calling net_ratelimit(). Fixes: d92cff89a0c8 ("net_dbg_ratelimited: turn into no-op when !DEBUG") Signed-off-by: Tim Bingham <tbingham@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 May 2016, 01:34:01 UTC
efe7905 tipc: only process unicast on intended node We have observed complete lock up of broadcast-link transmission due to unacknowledged packets never being removed from the 'transmq' queue. This is traced to nodes having their ack field set beyond the sequence number of packets that have actually been transmitted to them. Consider an example where node 1 has sent 10 packets to node 2 on a link and node 3 has sent 20 packets to node 2 on another link. We see examples of an ack from node 2 destined for node 3 being treated as an ack from node 2 at node 1. This leads to the ack on the node 1 to node 2 link being increased to 20 even though we have only sent 10 packets. When node 1 does get around to sending further packets, none of the packets with sequence numbers less than 21 are actually removed from the transmq. To resolve this we reinstate some code lost in commit d999297c3dbb ("tipc: reduce locking scope during packet reception") which ensures that only messages destined for the receiving node are processed by that node. This prevents the sequence numbers from getting out of sync and resolves the packet leakage, thereby resolving the broadcast-link transmission lock-ups we observed. While we are aware that this change only patches over a root problem that we still haven't identified, this is a sanity test that it is always legitimate to do. It will remain in the code even after we identify and fix the real problem. Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: John Thompson <john.thompson@alliedtelesis.co.nz> Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 May 2016, 01:03:30 UTC
0b86a2a cxgb3: fix out of bounds read An out of bounds read of 2 bytes was discovered in cxgb3 with KASAN. t3_config_rss() expects both arrays it gets as parameters to have terminators. setup_rss(), the caller, forgets to add a terminator to one of the arrays. Thankfully the iteration in t3_config_rss() stops anyway, but in the last iteration the check for the terminator is an out of bounds read. Add the missing terminator to rspq_map[]. Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 May 2016, 00:59:43 UTC
c489565 net/smscx5xx: use the device tree for mac address This takes the MAC address for smsc75xx/smsc95xx USB network devices from a the device tree. This is required to get a usable persistent address on the popular beagleboard, whose hardware designers accidentally forgot that an ethernet device really requires an a MAC address to be functional. The Raspberry Pi also ships smsc9514 without a serial EEPROM, stores the MAC address in ROM accessible via VC4 firmware. The smsc75xx and smsc95xx drivers are just two copies of the same code, so better fix both. [lkundrak@v3.sk: updated to use of_get_property() as per suggestion from Arnd, reworded the message and comments a bit] Tested-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: David S. Miller <davem@davemloft.net> 02 May 2016, 00:57:45 UTC
90e5d0d soreuseport: Fix TCP listener hash collision I forgot to include a check for listener port equality when deciding if two sockets should belong to the same reuseport group. This was not caught previously because it's only necessary when two listening sockets for the same user happen to hash to the same listener bucket. The same error does not exist in the UDP path. Fixes: c125e80b8868("soreuseport: fast reuseport TCP socket selection") Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 May 2016, 23:36:54 UTC
018f825 net: l2tp: fix reversed udp6 checksum flags This patch fixes a bug which causes the behavior of whether to ignore udp6 checksum of udp6 encapsulated l2tp tunnel contrary to what userspace program requests. When the flag `L2TP_ATTR_UDP_ZERO_CSUM6_RX` is set by userspace, it is expected that udp6 checksums of received packets of the l2tp tunnel to create should be ignored. In `l2tp_netlink.c`: `l2tp_nl_cmd_tunnel_create()`, `cfg.udp6_zero_rx_checksums` is set according to the flag, and then passed to `l2tp_core.c`: `l2tp_tunnel_create()` and then `l2tp_tunnel_sock_create()`. In `l2tp_tunnel_sock_create()`, `udp_conf.use_udp6_rx_checksums` is set the same to `cfg.udp6_zero_rx_checksums`. However, if we want the checksum to be ignored, `udp_conf.use_udp6_rx_checksums` should be set to `false`, i.e. be set to the contrary. Similarly, the same should be done to `udp_conf.use_udp6_tx_checksums`. Signed-off-by: Miao Wang <shankerwangmiao@gmail.com> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 May 2016, 23:32:16 UTC
04974df Linux 4.6-rc6 01 May 2016, 22:52:31 UTC
da9373d Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal fixes from Eduardo Valentin: "A couple of minor fixes for the thermal subsystem. Specifics in this pull request: - Fixes in hisilicon thermal driver - More fixes of unsigned to int type change in thermal_core.c" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: use %d to print S32 parameters thermal: hisilicon: increase temperature resolution 01 May 2016, 01:57:42 UTC
7df89e9 gpiolib-acpi: Duplicate con_id string when adding it to the crs lookup list Calling gpiod_get() from a module and then unloading the module leads to an oops due to acpi_can_fallback_to_crs() storing the pointer to the passed 'con_id' string onto acpi_crs_lookup_list. The next guy to come along will then try to access the string but the memory may now be gone with the module. Make a copy of the passed string instead, and store the copy on the list. BUG: unable to handle kernel paging request at ffffffffa03e7855 IP: [<ffffffff81338322>] strcmp+0x12/0x30 PGD 2a07067 PUD 2a08063 PMD 74720067 PTE 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: i915(+) drm_kms_helper drm intel_gtt snd_hda_codec snd_hda_core i2c_algo_bit syscopya rea sysfillrect sysimgblt fb_sys_fops agpgart snd_soc_sst_bytcr_rt5640 coretemp hwmon intel_rapl intel_soc_dts_thermal punit_atom_debug snd_soc_rt5640 snd_soc_rl6231 serio snd_intel_sst_acpi snd_intel_sst_core video snd_soc_sst_mfld_platf orm snd_soc_sst_match backlight int3402_thermal processor_thermal_device int3403_thermal int3400_thermal acpi_thermal_r el snd_soc_core intel_soc_dts_iosf int340x_thermal_zone snd_compress i2c_hid hid snd_pcm snd_timer snd soundcore evdev sch_fq_codel efivarfs ipv6 autofs4 [last unloaded: drm] CPU: 2 PID: 3064 Comm: modprobe Tainted: G U W 4.6.0-rc3-ffrd-ipvr+ #302 Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLAKFF81.X64.0088.R10.1403240443 FFD8 _X64_R_2014_13_1_00 03/24/2014 task: ffff8800701cd200 ti: ffff880070034000 task.ti: ffff880070034000 RIP: 0010:[<ffffffff81338322>] [<ffffffff81338322>] strcmp+0x12/0x30 RSP: 0000:ffff880070037748 EFLAGS: 00010286 RAX: 0000000080000000 RBX: ffff88007a342800 RCX: 0000000000000006 RDX: 0000000000000006 RSI: ffffffffa054f856 RDI: ffffffffa03e7856 RBP: ffff880070037748 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa054f855 R13: ffff88007281cae0 R14: 0000000000000010 R15: ffffffffffffffea FS: 00007faa51447700(0000) GS:ffff880079300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa03e7855 CR3: 0000000041eba000 CR4: 00000000001006e0 Stack: ffff880070037770 ffffffff8136ad28 ffffffffa054f855 0000000000000000 ffff88007a0a2098 ffff8800700377e8 ffffffff8136852e ffff88007a342800 00000007700377a0 ffff8800700377a0 ffffffff81412442 70672d6c656e6170 Call Trace: [<ffffffff8136ad28>] acpi_can_fallback_to_crs+0x88/0x100 [<ffffffff8136852e>] gpiod_get_index+0x25e/0x310 [<ffffffff81412442>] ? mipi_dsi_attach+0x22/0x30 [<ffffffff813685f2>] gpiod_get+0x12/0x20 [<ffffffffa04fcf41>] intel_dsi_init+0x421/0x480 [i915] [<ffffffffa04d3783>] intel_modeset_init+0x853/0x16b0 [i915] [<ffffffffa0504864>] ? intel_setup_gmbus+0x214/0x260 [i915] [<ffffffffa0510158>] i915_driver_load+0xdc8/0x19b0 [i915] [<ffffffff8160fb53>] ? _raw_spin_unlock_irqrestore+0x43/0x70 [<ffffffffa026b13b>] drm_dev_register+0xab/0xc0 [drm] [<ffffffffa026d7b3>] drm_get_pci_dev+0x93/0x1f0 [drm] [<ffffffff8160fb53>] ? _raw_spin_unlock_irqrestore+0x43/0x70 [<ffffffffa043f1f4>] i915_pci_probe+0x34/0x50 [i915] [<ffffffff81379751>] pci_device_probe+0x91/0x100 [<ffffffff8141a75a>] driver_probe_device+0x20a/0x2d0 [<ffffffff8141a8be>] __driver_attach+0x9e/0xb0 [<ffffffff8141a820>] ? driver_probe_device+0x2d0/0x2d0 [<ffffffff81418439>] bus_for_each_dev+0x69/0xa0 [<ffffffff8141a04e>] driver_attach+0x1e/0x20 [<ffffffff81419c20>] bus_add_driver+0x1c0/0x240 [<ffffffff8141b6d0>] driver_register+0x60/0xe0 [<ffffffff81377d20>] __pci_register_driver+0x60/0x70 [<ffffffffa026d9f4>] drm_pci_init+0xe4/0x110 [drm] [<ffffffff810ce04e>] ? trace_hardirqs_on+0xe/0x10 [<ffffffffa02f1000>] ? 0xffffffffa02f1000 [<ffffffffa02f1094>] i915_init+0x94/0x9b [i915] [<ffffffff810003bb>] do_one_initcall+0x8b/0x1c0 [<ffffffff810eb616>] ? rcu_read_lock_sched_held+0x86/0x90 [<ffffffff811de6d6>] ? kmem_cache_alloc_trace+0x1f6/0x270 [<ffffffff81183826>] do_init_module+0x60/0x1dc [<ffffffff81115a8d>] load_module+0x1d0d/0x2390 [<ffffffff811120b0>] ? __symbol_put+0x70/0x70 [<ffffffff811f41b2>] ? kernel_read_file+0x92/0x120 [<ffffffff811162f4>] SYSC_finit_module+0xa4/0xb0 [<ffffffff8111631e>] SyS_finit_module+0xe/0x10 [<ffffffff81001ff3>] do_syscall_64+0x63/0x350 [<ffffffff816103da>] entry_SYSCALL64_slow_path+0x25/0x25 Code: f7 48 8d 76 01 48 8d 52 01 0f b6 4e ff 84 c9 88 4a ff 75 ed 5d c3 0f 1f 00 55 48 89 e5 eb 04 84 c0 74 18 48 8d 7f 01 48 8d 76 01 <0f> b6 47 ff 3a 46 ff 74 eb 19 c0 83 c8 01 5d c3 31 c0 5d c3 66 RIP [<ffffffff81338322>] strcmp+0x12/0x30 RSP <ffff880070037748> CR2: ffffffffa03e7855 v2: Make the copied con_id const Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: stable@vger.kernel.org Fixes: 10cf4899f8af ("gpiolib: tighten up ACPI legacy gpio lookups") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 30 April 2016, 11:51:59 UTC
1b46bac Merge tag 'powerpc-4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "A few more powerpc fixes for 4.6: - cxl: Keep IRQ mappings on context teardown from Michael Neuling - cxl: Poll for outstanding IRQs when detaching a context from Michael Neuling - Wire up preadv2 and pwritev2 syscalls from Rui Salvaterra" * tag 'powerpc-4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: wire up preadv2 and pwritev2 syscalls cxl: Poll for outstanding IRQs when detaching a context cxl: Keep IRQ mappings on context teardown 30 April 2016, 01:50:08 UTC
65c4cbe Merge tag 'edac_fix_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC fix from Borislav Petkov: "Make sure sb_edac and i7core_edac do not terminate MCE processing on the decoding callchain prematurely" * tag 'edac_fix_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callback 30 April 2016, 00:59:26 UTC
b49a519 Merge tag 'pm+acpi-4.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "One revert of a recent cpufreq commit that introduced a regression and a fix for intel_pstate's Turbo Activation Ratio handling code. Specifics: - Revert cpufreq commit that attempted to fix a problem in the ondemand/conservative governor code, but did that incorrectly and introduced another problem instead (Rafael Wysocki). - Fix incorrect decoding of MSR contents related to the Turbo Activation Ratio (TAR) handling in the intel_pstate driver (Srinivas Pandruvada)" * tag 'pm+acpi-4.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Fix processing for turbo activation ratio Revert "cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC" 30 April 2016, 00:39:51 UTC
a8feb78 Merge tag 'mmc-v4.6-rc4' of git://git.linaro.org/people/ulf.hansson/mmc Pull MMC fixes from Ulf Hansson: "Here are a two MMC host fixes: - sdhci-acpi: Reduce Baytrail eMMC/SD/SDIO hangs - sunxi: Disable eMMC HS-DDR for Allwinner A80" * tag 'mmc-v4.6-rc4' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: sunxi: Disable eMMC HS-DDR (MMC_CAP_1_8V_DDR) for Allwinner A80 mmc: sdhci-acpi: Reduce Baytrail eMMC/SD/SDIO hangs 30 April 2016, 00:32:19 UTC
b9cc335 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "A few fixes all over the place: radeon is probably the biggest standout, it's a fix for screen corruption or hung black outputs so I thought it was worth pulling in. Otherwise some amdgpu power control fixes, some misc vmwgfx fixes, one etnaviv fix, one virtio-gpu fix, two DP MST fixes, and a single TTM fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Fix order of operation drm/vmwgfx: use vmw_cmd_dx_cid_check for query commands. drm/vmwgfx: Enable SVGA_3D_CMD_DX_SET_PREDICATION drm/amdgpu: disable vm interrupts with vm_fault_stop=2 drm/amdgpu: print a message if ATPX dGPU power control is missing Revert "drm/amdgpu: disable runtime pm on PX laptops without dGPU power control" drm/radeon: fix vertical bars appear on monitor (v2) drm/ttm: fix kref count mess in ttm_bo_move_to_lru_tail drm/virtio: send vblank event after crtc updates drm/dp/mst: Restore primary hub guid on resume drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1() drm/etnaviv: don't move linear memory window on 3D cores without MC2.0 30 April 2016, 00:18:55 UTC
925d96a Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "Final set of -rc fixes for 4.6. I've collected up a number of patches that are all pretty small with the exception of only a couple. The hfi1 driver has a number of important patches, and it is what really drives the line count of this pull request up. These are all small and I've got this kernel built and running in the test lab (I have most of the hardware, I think nes is the only thing in this patch set that I can't say I've personally tested and have up and running). Summary: - A number of collected fixes for oopses, memory corruptions, deadlocks, etc. All of these fixes are small (many only 5-10 lines), obvious, and tested. - Fix for the security issue related to the use of write for bi-directional communications" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: RDMA/nes: don't leak skb if carrier down IB/security: Restrict use of the write() interface IB/hfi1: Use kernel default llseek for ui device IB/hfi1: Don't attempt to free resources if initialization failed IB/hfi1: Fix missing lock/unlock in verbs drain callback IB/rdmavt: Fix send scheduling IB/hfi1: Prevent unpinning of wrong pages IB/hfi1: Fix deadlock caused by locking with wrong scope IB/hfi1: Prevent NULL pointer deferences in caching code MAINTAINERS: Update iser/isert maintainer contact info IB/mlx5: Expose correct max_sge_rd limit RDMA/iw_cxgb4: Fix bar2 virt addr calculation for T4 chips iw_cxgb4: handle draining an idle qp iw_cxgb3: initialize ibdev.iwcm->ifname for port mapping iw_cxgb4: initialize ibdev.iwcm->ifname for port mapping IB/core: Don't drain non-existent rq queue-pair IB/core: Fix oops in ib_cache_gid_set_default_gid 30 April 2016, 00:07:54 UTC
b8a0b8e raid5: delete unnecessary warnning If device has R5_LOCKED set, it's legit device has R5_SkipCopy set and page != orig_page. After R5_LOCKED is clear, handle_stripe_clean_event will clear the SkipCopy flag and set page to orig_page. So the warning is unnecessary. Reported-by: Joey Liao <joeyliao@qnap.com> Signed-off-by: Shaohua Li <shli@fb.com> 29 April 2016, 21:18:03 UTC
1d003af Merge branch 'akpm' (patches from Andrew) Merge fixes from Andrew Morton: "20 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: Documentation/sysctl/vm.txt: update numa_zonelist_order description lib/stackdepot.c: allow the stack trace hash to be zero rapidio: fix potential NULL pointer dereference mm/memory-failure: fix race with compound page split/merge ocfs2/dlm: return zero if deref_done message is successfully handled Ananth has moved kcov: don't profile branches in kcov kcov: don't trace the code coverage code mm: wake kcompactd before kswapd's short sleep .mailmap: add Frank Rowand mm/hwpoison: fix wrong num_poisoned_pages accounting mm: call swap_slot_free_notify() with page lock held mm: vmscan: reclaim highmem zone if buffer_heads is over limit numa: fix /proc/<pid>/numa_maps for THP mm/huge_memory: replace VM_NO_THP VM_BUG_ON with actual VMA check mailmap: fix Krzysztof Kozlowski's misspelled name thp: keep huge zero page pinned until tlb flush mm: exclude HugeTLB pages from THP page_mapped() logic kexec: export OFFSET(page.compound_head) to find out compound tail page kexec: update VMCOREINFO for compound_order/dtor 29 April 2016, 18:21:22 UTC
f27337e ip_tunnel: fix preempt warning in ip tunnel creation/updating After the commit e09acddf873b ("ip_tunnel: replace dst_cache with generic implementation"), a preemption debug warning is triggered on ip4 tunnels updating; the dst cache helper needs to be invoked in unpreemptible context. We don't need to load the cache on tunnel update, so this commit fixes the warning replacing the load with a dst cache reset, which is preempt safe. Fixes: e09acddf873b ("ip_tunnel: replace dst_cache with generic implementation") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 April 2016, 18:11:46 UTC
c4fc195 EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callback Both of these drivers can return NOTIFY_BAD, but this terminates processing other callbacks that were registered later on the chain. Since the driver did nothing to log the error it seems wrong to prevent other interested parties from seeing it. E.g. neither of them had even bothered to check the type of the error to see if it was a memory error before the return NOTIFY_BAD. Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/72937355dd92318d2630979666063f8a2853495b.1461864507.git.tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de> 29 April 2016, 13:43:10 UTC
81be193 Merge branch 'pm-cpufreq-fixes' * pm-cpufreq-fixes: cpufreq: intel_pstate: Fix processing for turbo activation ratio Revert "cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC" 29 April 2016, 12:22:25 UTC
ea99697 Merge branch 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux into drm-fixes A few fixes for 4.6. - revert amdgpu PX commit that was previously reverted on the radeon side - cleaned up version of the NI+ MC update display fix for radeon - TTM kref fix * 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: disable vm interrupts with vm_fault_stop=2 drm/amdgpu: print a message if ATPX dGPU power control is missing Revert "drm/amdgpu: disable runtime pm on PX laptops without dGPU power control" drm/radeon: fix vertical bars appear on monitor (v2) drm/ttm: fix kref count mess in ttm_bo_move_to_lru_tail 29 April 2016, 04:31:44 UTC
d8ba5d6 Merge branch 'drm-vmwgfx-fixes' of git://people.freedesktop.org/~syeh/repos_linux into drm-fixes three misc vmwgfx fixes * 'drm-vmwgfx-fixes' of git://people.freedesktop.org/~syeh/repos_linux: drm/vmwgfx: Fix order of operation drm/vmwgfx: use vmw_cmd_dx_cid_check for query commands. drm/vmwgfx: Enable SVGA_3D_CMD_DX_SET_PREDICATION 29 April 2016, 04:27:50 UTC
92c19ea Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two boot crash fixes and an IRQ handling crash fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Handle zero vector gracefully in clear_vector_irq() Revert "x86/mm/32: Set NX in __supported_pte_mask before enabling paging" xen/qspinlock: Don't kick CPU if IRQ is not initialized 29 April 2016, 03:24:27 UTC
814dd94 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "x86 PMU driver fixes plus a core code race fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix incorrect lbr_sel_mask value perf/x86/intel/pt: Don't die on VMXON perf/core: Fix perf_event_open() vs. execve() race perf/x86/amd: Set the size of event map array to PERF_COUNT_HW_MAX perf/core: Make sysctl_perf_cpu_time_max_percent conform to documentation perf/x86/intel/rapl: Add missing Haswell model perf/x86/intel: Add model number for Skylake Server to perf 29 April 2016, 03:19:04 UTC
2113cae Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Two lockdep fixes" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Fix lock_chain::base size locking/lockdep: Fix ->irq_context calculation 29 April 2016, 02:59:17 UTC
8f3603a Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fix from Ingo Molnar: "This fixes a bug in the efivars code" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Fix out-of-bounds read in variable_matches() 29 April 2016, 02:54:50 UTC
ba14e96 Merge tag 'media/v4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Some regression fixes: - videobuf2 core: avoid the risk of going past buffer on multi-planes and fix rw mode - fix support for 4K formats at V4L2 core - fix a trouble at davinci_fpe, caused by a bad patch - usbvision: revert a patch with a partial fixup. The fixup patch was merged already, and this one has some issues" * tag 'media/v4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] vb2-memops: Fix over allocation of frame vectors [media] media: vb2: Fix regression on poll() for RW mode [media] v4l2-dv-timings.h: fix polarity for 4k formats [media] davinci_vpfe: Revert "staging: media: davinci_vpfe: remove,unnecessary ret variable" [media] usbvision: revert commit 588afcc1 [media] videobuf2-v4l2: Verify planes array in buffer dequeueing [media] videobuf2-core: Check user space planes array in dqbuf 29 April 2016, 02:44:47 UTC
e1f14a5 Merge tag 'sound-4.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Usually we get a big collection of fixes for ASoC once during rc. And this is it. At this time, most of fixes are about Intel Skylake ASoC driver, which is a new and still on-going development. Along with it, a slight large LOC is seen in legacy HD-audio driver, but it's merely a code move to the upper layer. Other than that, the rest are small or trivial fixes to various drivers, in addition to an ASoC dapm debugfs code fix" * tag 'sound-4.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits) ALSA: hda - Update BCLK also at hotplug for i915 HSW/BDW ALSA: hda - Add dock support for ThinkPad X260 ASoC: wm5102: Free compressed IRQ in CODEC remove ASoC: arizona: Free speaker thermal IRQs in CODEC remove ASoC: Intel: Skylake: Fix ibs/obs calc for non-integral sampling rates ASoC: Intel: sst: fix a loop timeout in sst_hsw_stream_reset() ASoC: Intel: Skylake: Fix to turn OFF codec power when entering S3 ASoC: hdac_hdmi: Fix codec power state in S3 during playback ASoC: hdac_hdmi: Fix to use dev_pm ops instead soc pm ASoC: wm8962: Correct typo when setting DSPCLK rate ASoC: nau8825: Fix jack detection across suspend ASoC: Intel: Skylake: Fix DSP resource de-allocation ASoC: Intel: Skylake: Fix for unloading module only when it is loaded ASoC: Intel: Skylake: Fix kbuild dependency ASoC: dapm: Make sure we have a card when displaying component widgets ASoC: rt5640: Correct the digital interface data select ASoC: Intel: Skylake: remove call to pci_dev_put ASoC: Intel: Skylake: Call i915 exit last ASoC: Intel: Skylake: Unmap the address last ASoC: Intel: Skylake: Freeup properly on skl_dsp_free ... 29 April 2016, 02:38:45 UTC
7c88a29 Documentation/sysctl/vm.txt: update numa_zonelist_order description Commit 3193913ce62c ("mm: page_alloc: default node-ordering on 64-bit NUMA, zone-ordering on 32-bit") changes the default value of numa_zonelist_order. Update the document. Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
33334e2 lib/stackdepot.c: allow the stack trace hash to be zero Do not bail out from depot_save_stack() if the stack trace has zero hash. Initially depot_save_stack() silently dropped stack traces with zero hashes, however there's actually no point in reserving this zero value. Reported-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Alexander Potapenko <glider@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
99f23c2 rapidio: fix potential NULL pointer dereference The change fixes improper check for a returned error value by class_create() function, which on error returns ERR_PTR() value, thus the original check always results in a dead code on error path. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
c2e7e00 mm/memory-failure: fix race with compound page split/merge get_hwpoison_page() must recheck relation between head and tail pages. n-horiguchi said: without this recheck, the race causes kernel to pin an irrelevant page, and finally makes kernel crash for refcount mismatch. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
b734136 ocfs2/dlm: return zero if deref_done message is successfully handled dlm_deref_lockres_done_handler() should return zero if the message is successfully handled. Fixes: 60d663cb5273 ("ocfs2/dlm: add DEREF_DONE message"). Signed-off-by: xuejiufei <xuejiufei@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
a320817 Ananth has moved The current ID is going away soon... update email address Signed-off-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
36f05ae kcov: don't profile branches in kcov Profiling 'if' statements in __sanitizer_cov_trace_pc() leads to unbound recursion and crash: __sanitizer_cov_trace_pc() -> ftrace_likely_update -> __sanitizer_cov_trace_pc() ... Define DISABLE_BRANCH_PROFILING to disable this tracer. Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
bdab42d kcov: don't trace the code coverage code Kcov causes the compiler to add a call to __sanitizer_cov_trace_pc() in every basic block. Ftrace patches in a call to _mcount() to each function it has annotated. Letting these mechanisms annotate each other is a bad thing. Break the loop by adding 'notrace' to __sanitizer_cov_trace_pc() so that ftrace won't try to patch this code. This patch lets arm64 with KCOV and STACK_TRACER boot. Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
fd901c9 mm: wake kcompactd before kswapd's short sleep When kswapd goes to sleep it checks if the node is balanced and at first it sleeps only for HZ/10 time, then rechecks if the node is still balanced and nobody has woken it during the initial sleep. Only then it goes fully sleep until an allocation slowpath wakes it up again. For higher-order allocations, waking up kcompactd is done only before the full sleep. This turns out to be an issue in case another high-order allocation fails during the initial sleep. It will wake kswapd up, however kswapd considers the zone balanced from the order-0 perspective, and will just quickly try to sleep again. So if there's a longer stream of high-order allocations hitting the slowpath and waking up kswapd, it might never actually wake up kcompactd, which may be considered a regression from kswapd-based compaction. In the worst case, it might be that a single allocation that cannot direct reclaim/compact itself is waking kswapd in the retry loop and preventing kcompactd from being woken up and unblocking it. This patch makes sure kcompactd is woken up in such situations by simply moving the wakeup before the short initial sleep. More efficient solution would be to wake kcompactd immediately instead of kswapd if the node is already order-0 balanced, but in that case we should also move reset_isolation_suitable() call to kcompactd so it's not adding to the allocator's latency. Since it's late in the 4.6 cycle, let's go with the simpler change for now. Fixes: accf62422b3a ("mm, kswapd: replace kswapd compaction with waking up kcompactd") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
eeb68d1 .mailmap: add Frank Rowand Set current email address to replace obsolete email addresses. Signed-off-by: Frank Rowand <frank.rowand@sonymobile.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
d7e6948 mm/hwpoison: fix wrong num_poisoned_pages accounting Currently, migration code increses num_poisoned_pages on *failed* migration page as well as successfully migrated one at the trial of memory-failure. It will make the stat wrong. As well, it marks the page as PG_HWPoison even if the migration trial failed. It would mean we cannot recover the corrupted page using memory-failure facility. This patches fixes it. Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
b06bad1 mm: call swap_slot_free_notify() with page lock held Kyeongdon reported below error which is BUG_ON(!PageSwapCache(page)) in page_swap_info. The reason is that page_endio in rw_page unlocks the page if read I/O is completed so we need to hold a PG_lock again to check PageSwapCache. Otherwise, the page can be removed from swapcache. Kernel BUG at c00f9040 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 4 PID: 13446 Comm: RenderThread Tainted: G W 3.10.84-g9f14aec-dirty #73 task: c3b73200 ti: dd192000 task.ti: dd192000 PC is at page_swap_info+0x10/0x2c LR is at swap_slot_free_notify+0x18/0x6c pc : [<c00f9040>] lr : [<c00f5560>] psr: 400f0113 sp : dd193d78 ip : c2deb1e4 fp : da015180 r10: 00000000 r9 : 000200da r8 : c120fe08 r7 : 00000000 r6 : 00000000 r5 : c249a6c0 r4 : = c249a6c0 r3 : 00000000 r2 : 40080009 r1 : 200f0113 r0 : = c249a6c0 ..<snip> .. Call Trace: page_swap_info+0x10/0x2c swap_slot_free_notify+0x18/0x6c swap_readpage+0x90/0x11c read_swap_cache_async+0x134/0x1ac swapin_readahead+0x70/0xb0 handle_pte_fault+0x320/0x6fc handle_mm_fault+0xc0/0xf0 do_page_fault+0x11c/0x36c do_DataAbort+0x34/0x118 Fixes: 3f2b1a04f44933f2 ("zram: revive swap_slot_free_notify") Signed-off-by: Minchan Kim <minchan@kernel.org> Tested-by: Kyeongdon Kim <kyeongdon.kim@lge.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
7bf52fb mm: vmscan: reclaim highmem zone if buffer_heads is over limit We have been reclaimed highmem zone if buffer_heads is over limit but commit 6b4f7799c6a5 ("mm: vmscan: invoke slab shrinkers from shrink_zone()") changed the behavior so it doesn't reclaim highmem zone although buffer_heads is over the limit. This patch restores the logic. Fixes: 6b4f7799c6a5 ("mm: vmscan: invoke slab shrinkers from shrink_zone()") Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
28093f9 numa: fix /proc/<pid>/numa_maps for THP In gather_pte_stats() a THP pmd is cast into a pte, which is wrong because the layouts may differ depending on the architecture. On s390 this will lead to inaccurate numa_maps accounting in /proc because of misguided pte_present() and pte_dirty() checks on the fake pte. On other architectures pte_present() and pte_dirty() may work by chance, but there may be an issue with direct-access (dax) mappings w/o underlying struct pages when HAVE_PTE_SPECIAL is set and THP is available. In vm_normal_page() the fake pte will be checked with pte_special() and because there is no "special" bit in a pmd, this will always return false and the VM_PFNMAP | VM_MIXEDMAP checking will be skipped. On dax mappings w/o struct pages, an invalid struct page pointer would then be returned that can crash the kernel. This patch fixes the numa_maps THP handling by introducing new "_pmd" variants of the can_gather_numa_stats() and vm_normal_page() functions. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> [4.3+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
3486b85 mm/huge_memory: replace VM_NO_THP VM_BUG_ON with actual VMA check Khugepaged detects own VMAs by checking vm_file and vm_ops but this way it cannot distinguish private /dev/zero mappings from other special mappings like /dev/hpet which has no vm_ops and popultes PTEs in mmap. This fixes false-positive VM_BUG_ON and prevents installing THP where they are not expected. Link: http://lkml.kernel.org/r/CACT4Y+ZmuZMV5CjSFOeXviwQdABAgT7T+StKfTqan9YDtgEi5g@mail.gmail.com Fixes: 78f11a255749 ("mm: thp: fix /dev/zero MAP_PRIVATE and vm_flags cleanups") Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
314e9b7 mailmap: fix Krzysztof Kozlowski's misspelled name Patchwork introduced a garbled Polish character in commit 1e3012d0fdc5 ("crypto: s5p-sss - Use memcpy_toio for iomem annotated memory") so fix the mail mapping. Additionally prefer to use kernel.org account for personal work, instead of my gmail address. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
aa88b68 thp: keep huge zero page pinned until tlb flush Andrea has found[1] a race condition on MMU-gather based TLB flush vs split_huge_page() or shrinker which frees huge zero under us (patch 1/2 and 2/2 respectively). With new THP refcounting, we don't need patch 1/2: mmu_gather keeps the page pinned until flush is complete and the pin prevents the page from being split under us. We still need patch 2/2. This is simplified version of Andrea's patch. We don't need fancy encoding. [1] http://lkml.kernel.org/r/1447938052-22165-1-git-send-email-aarcange@redhat.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
66ee95d mm: exclude HugeTLB pages from THP page_mapped() logic HugeTLB pages cannot be split, so we use the compound_mapcount to track rmaps. Currently page_mapped() will check the compound_mapcount, but will also go through the constituent pages of a THP compound page and query the individual _mapcount's too. Unfortunately, page_mapped() does not distinguish between HugeTLB and THP compound pages and assumes that a compound page always needs to have HPAGE_PMD_NR pages querying. For most cases when dealing with HugeTLB this is just inefficient, but for scenarios where the HugeTLB page size is less than the pmd block size (e.g. when using contiguous bit on ARM) this can lead to crashes. This patch adjusts the page_mapped function such that we skip the unnecessary THP reference checks for HugeTLB pages. Fixes: e1534ae95004 ("mm: differentiate page_mapped() from page_mapcount() for compound pages") Signed-off-by: Steve Capper <steve.capper@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
d7f5351 kexec: export OFFSET(page.compound_head) to find out compound tail page PageAnon() always look at head page to check PAGE_MAPPING_ANON and tail page's page->mapping has just a poisoned data since commit 1c290f642101 ("mm: sanitize page->mapping for tail pages"). If makedumpfile checks page->mapping of a compound tail page to distinguish anonymous page as usual, it must fail in newer kernel. So it's necessary to export OFFSET(page.compound_head) to avoid checking compound tail pages. The problem is that unnecessary hugepages won't be removed from a dump file in kernels 4.5.x and later. This means that extra disk space would be consumed. It's a problem, but not critical. Signed-off-by: Atsushi Kumagai <ats-kumagai@wm.jp.nec.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
8639a84 kexec: update VMCOREINFO for compound_order/dtor makedumpfile refers page.lru.next to get the order of compound pages for page filtering. However, now the order is stored in page.compound_order, hence VMCOREINFO should be updated to export the offset of page.compound_order. The fact is, page.compound_order was introduced already in kernel 4.0, but the offset of it was the same as page.lru.next until kernel 4.3, so this was not actual problem. The above can be said also for page.lru.prev and page.compound_dtor, it's necessary to detect hugetlbfs pages. Further, the content was changed from direct address to the ID which means dtor. The problem is that unnecessary hugepages won't be removed from a dump file in kernels 4.4.x and later. This means that extra disk space would be consumed. It's a problem, but not critical. Signed-off-by: Atsushi Kumagai <ats-kumagai@wm.jp.nec.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 April 2016, 02:34:04 UTC
6fa9bff Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes from Sage Weil: "There is a lifecycle fix in the auth code, a fix for a narrow race condition on map, and a helpful message in the log when there is a feature mismatch (which happens frequently now that the default server-side options have changed)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: report unsupported features to syslog rbd: fix rbd map vs notify races libceph: make authorizer destruction independent of ceph_auth_client 29 April 2016, 01:59:24 UTC
cf681c2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Three more bug fixes for 4.6 - Due to a race in the dynamic page table code a multi-threaded program can cause a translation specification exception. With panic_on_oops a user space program can crash the system. - An information leak with the /dev/sclp device. - A use after free in the s390 PCI code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/sclp_ctl: fix potential information leak with /dev/sclp s390/mm: fix asce_bits handling with dynamic pagetable levels s390/pci: fix use after free in dma_init 29 April 2016, 01:52:11 UTC
4c8bb95 RDMA/nes: don't leak skb if carrier down Alternatively one could free the skb, OTOH I don't think this test is useful so just remove it. Cc: <linux-rdma@vger.kernel.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Doug Ledford <dledford@redhat.com> 29 April 2016, 01:11:09 UTC
1dfcd83 Merge branch 'bpf-fixes' Alexei Starovoitov says: ==================== bpf: fix several bugs First two patches address bugs found by Jann Horn. Last patch is a minor samples fix spotted during the testing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:29:46 UTC
569cc39 samples/bpf: fix trace_output example llvm cannot always recognize memset as builtin function and optimize it away, so just delete it. It was a leftover from testing of bpf_perf_event_output() with large data structures. Fixes: 39111695b1b8 ("samples: bpf: add bpf_perf_event_output example") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:29:45 UTC
6aff67c bpf: fix check_map_func_compatibility logic The commit 35578d798400 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU conuter") introduced clever way to check bpf_helper<->map_type compatibility. Later on commit a43eec304259 ("bpf: introduce bpf_perf_event_output() helper") adjusted the logic and inadvertently broke it. Get rid of the clever bool compare and go back to two-way check from map and from helper perspective. Fixes: a43eec304259 ("bpf: introduce bpf_perf_event_output() helper") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:29:45 UTC
92117d8 bpf: fix refcnt overflow On a system with >32Gbyte of phyiscal memory and infinite RLIMIT_MEMLOCK, the malicious application may overflow 32-bit bpf program refcnt. It's also possible to overflow map refcnt on 1Tb system. Impose 32k hard limit which means that the same bpf program or map cannot be shared by more than 32k processes. Fixes: 1be7f75d1668 ("bpf: enable non-root eBPF programs") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:29:45 UTC
bd34cf6 Merge branch 'cpsw-phy-handle-fixes' David Rivshin says: ==================== drivers: net: cpsw: phy-handle fixes This series fixes a number of related issues around using phy-handle properties in cpsw emac nodes. Patch 1 fixes a bug if more than one slave is used, and either slave uses the phy-handle property in the devicetree. Patch 2 fixes a NULL pointer dereference which can occur if a phy-handle property is used and of_phy_connect() return NULL, such as with a bad devicetree. Patch 3 fixes an issue where the phy-mode property would be ignored if a phy-handle property was used. This also fixes a bogus error message that would be emitted. Patch 4 fixes makes the binding documentation more explicit that exactly one PHY property should be used, and also marks phy_id as deprecated. Patch 5 cleans up the fixed-link case to work like the now-fixed phy-handle case. I have tested on the following hardware configurations: - (EVMSK) dual emac, phy_id property in both slaves - (EVMSK) dual emac, phy-handle property in both slaves - (EVMSK) a bad phy-handle property pointing to &mmc1 - (EVMSK) phy_id property with incorrect PHY address - (BeagleBoneBlack) single emac, phy_id property - (custom) single emac, fixed-link subnode Andrew Goodbody reported testing v2 on a board that doesn't use dual_emac mode, but with 2 PHYs using phy-handle properties [1]. Nicolas Chauvet reported testing v2 on an HP t410 (dm8148). Markus Brunner reported testing v1 on the following [2]: - emac0 with phy_id and emac1 with fixed phy - emac0 with phy-handle and emac1 with fixed phy - emac0 with fixed phy and emac1 with fixed phy [1] https://lkml.org/lkml/2016/4/22/537 [2] http://www.spinics.net/lists/netdev/msg357890.html ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:27:31 UTC
06cd6d6 drivers: net: cpsw: use of_phy_connect() in fixed-link case If a fixed-link DT subnode is used, the phy_device was looked up so that a PHY ID string could be constructed and passed to phy_connect(). This is not necessary, as the device_node can be passed directly to of_phy_connect() instead. This reuses the same codepath as if the phy-handle DT property was used. Signed-off-by: David Rivshin <drivshin@allworx.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Andrew Goodbody <andrew.goodbody@cambrionix.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:27:30 UTC
a5d2cb3 dt: cpsw: phy-handle, phy_id, and fixed-link are mutually exclusive The phy-handle, phy_id, and fixed-link properties are mutually exclusive, and only one need be specified. Make this clear in the binding doc. Also mark the phy_id property as deprecated, as phy-handle should be used instead. Signed-off-by: David Rivshin <drivshin@allworx.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:27:30 UTC
ae092b5 drivers: net: cpsw: don't ignore phy-mode if phy-handle is used The phy-mode emac property was only being processed in the phy_id or fixed-link cases. However if phy-handle was specified instead, an error message would complain about the lack of phy_id or fixed-link, and then jump past the of_get_phy_mode(). This would result in the PHY mode defaulting to MII, regardless of what the devicetree specified. Fixes: 9e42f715264f ("drivers: net: cpsw: add phy-handle parsing") Signed-off-by: David Rivshin <drivshin@allworx.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Andrew Goodbody <andrew.goodbody@cambrionix.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:27:30 UTC
d733f75 drivers: net: cpsw: fix segfault in case of bad phy-handle If an emac node has a phy-handle property that points to something which is not a phy, then a segmentation fault will occur when the interface is brought up. This is because while phy_connect() will return ERR_PTR() on failure, of_phy_connect() will return NULL. The common error check uses IS_ERR(), and so missed when of_phy_connect() fails. The NULL pointer is then dereferenced. Also, the common error message referenced slave->data->phy_id, which would be empty in the case of phy-handle. Instead, use the name of the device_node as a useful identifier. And in the phy_id case add the error code for completeness. Fixes: 9e42f715264f ("drivers: net: cpsw: add phy-handle parsing") Signed-off-by: David Rivshin <drivshin@allworx.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:27:29 UTC
552165b drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac config Commit 9e42f715264ff158478fa30eaed847f6e131366b ("drivers: net: cpsw: add phy-handle parsing") saved the "phy-handle" phandle into a new cpsw_priv field. However, phy connections are per-slave, so the phy_node field should be in cpsw_slave_data rather than cpsw_priv. This would go unnoticed in a single emac configuration. But in dual_emac mode, the last "phy-handle" property parsed for either slave would be used by both of them, causing them both to refer to the same phy_device. Fixes: 9e42f715264f ("drivers: net: cpsw: add phy-handle parsing") Signed-off-by: David Rivshin <drivshin@allworx.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Andrew Goodbody <andrew.goodbody@cambrionix.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:27:29 UTC
bbdd09e MAINTAINERS: net: Change maintainer for GRETH 10/100/1G Ethernet MAC device driver Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:11:53 UTC
946b636 gre: reject GUE and FOU in collect metadata mode The collect metadata mode does not support GUE nor FOU. This might be implemented later; until then, we should reject such config. I think this is okay to be changed. It's unlikely anyone has such configuration (as it doesn't work anyway) and we may need a way to distinguish whether it's supported or not by the kernel later. For backwards compatibility with iproute2, it's not possible to just check the attribute presence (iproute2 always includes the attribute), the actual value has to be checked, too. Fixes: 2e15ea390e6f4 ("ip_gre: Add support to collect tunnel metadata.") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:09:37 UTC
47ff580 Merge branch 'pegasus-sizes' Petko Manolov says: ==================== pegasus: correct buffer & packet sizes As noticed by Lincoln Ramsay <a1291762@gmail.com> some old (usb 1.1) Pegasus based devices may actually return more bytes than the specified in the datasheet amount. That would not be a problem if the allocated space for the SKB was equal to the parameter passed to usb_fill_bulk_urb(). Some poor bugger (i really hope it was not me, but 'git blame' is useless in this case, so anyway) decided to add '+ 8' to the buffer length parameter. Sometimes the usb transfer overflows and corrupts the socket structure, leading to kernel panic. The above doesn't seem to happen for newer (Pegasus2 based) devices which did help this bug to hide for so long. The new default is to not include the CRC at the end of each received package. So far CRC has been ignored which makes no sense to do it in a first place. The patch is against v4.6-rc5 and was tested on ADM8515 device by transferring multiple gigabytes of data over a couple of days without any complaints from the kernel. Please apply it to whatever net tree you deem fit. Changes since v1: - split the patch in two parts; - corrected the subject lines; Changes since v2: - do not append CRC by default (based on a discussion with Johannes Berg); ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:05:25 UTC
1a8deec pegasus: fixes reported packet length The default Pegasus setup was to append the status and CRC at the end of each received packet. The status bits are used to update various stats, but CRC has been ignored. The new default is to not append CRC at the end of RX packets. Signed-off-by: Petko Manolov <petkan@mip-labs.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:05:25 UTC
b7302ca pegasus: fixes URB buffer allocation size; usb_fill_bulk_urb() receives buffer length parameter 8 bytes larger than what's allocated by alloc_skb(); This seems to be a problem with older (pegasus usb-1.1) devices, which may silently return more data than the maximal packet length. Reported-by: Lincoln Ramsay <a1291762@gmail.com> Signed-off-by: Petko Manolov <petkan@mip-labs.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:05:24 UTC
6c76f3d Merge branch 'gre-lwt-fixes' Jiri Benc says: ==================== gre: fix lwtunnel support This patchset fixes a few bugs in ipgre metadata mode implementation. As an example, in this setup: ip a a 192.168.1.1/24 dev eth0 ip l a gre1 type gre external ip l s gre1 up ip a a 192.168.99.1/24 dev gre1 ip r a 192.168.99.2/32 encap ip dst 192.168.1.2 ttl 10 dev gre1 ping 192.168.99.2 the traffic does not go through before this patchset and does as expected with it applied. v3: Back to v1 in order not to break existing users. Dropped patch 3, will be fixed in iproute2 instead. v2: Rejecting invalid configuration, added patch 3, dropped patch for ETH_P_TEB (will target net-next). ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:02:45 UTC
2090714 gre: build header correctly for collect metadata tunnels In ipgre (i.e. not gretap) + collect metadata mode, the skb was assumed to contain Ethernet header and was encapsulated as ETH_P_TEB. This is not the case, the interface is ARPHRD_IPGRE and the protocol to be used for encapsulation is skb->protocol. Fixes: 2e15ea390e6f4 ("ip_gre: Add support to collect tunnel metadata.") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:02:45 UTC
a64b04d gre: do not assign header_ops in collect metadata mode In ipgre mode (i.e. not gretap) with collect metadata flag set, the tunnel is incorrectly assumed to be mGRE in NBMA mode (see commit 6a5f44d7a048c). This is not the case, we're controlling the encapsulation addresses by lwtunnel metadata. And anyway, assigning dev->header_ops in collect metadata mode does not make sense. Although it would be more user firendly to reject requests that specify both the collect metadata flag and a remote/local IP address, this would break current users of gretap or introduce ugly code and differences in handling ipgre and gretap configuration. Keep the current behavior of remote/local IP address being ignored in such case. v3: Back to v1, added explanation paragraph. v2: Reject configuration specifying both remote/local address and collect metadata flag. Fixes: 2e15ea390e6f4 ("ip_gre: Add support to collect tunnel metadata.") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 21:02:44 UTC
12395d0 Merge tag 'mac80211-for-davem-2016-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just a single fix, for a per-CPU memory leak in a (root user triggerable) error case. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 20:55:26 UTC
a05d7df net: phy: at803x: only the AT8030 needs a hardware reset on link change Commit 13a56b44 ("at803x: Add support for hardware reset") added a work-around for a hardware bug on the AT8030. However, the work-around was being called for all 803x PHYs, even those that don't need it. Function at803x_link_change_notify() checks to make sure that it only resets the PHY on the 8030, but it makes more sense to not call that function at all if it isn't needed. Signed-off-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 20:48:21 UTC
956a7ff Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-merge Antonio Quartulli says: ==================== In this patchset you can find the following fixes: 1) check skb size to avoid reading beyond its border when delivering payloads, by Sven Eckelmann 2) initialize last_seen time in neigh_node object to prevent cleanup routine from accidentally purge it, by Marek Lindner 3) release "recently added" slave interfaces upon virtual/batman interface shutdown, by Sven Eckelmann 4) properly decrease router object reference counter upon routing table update, by Sven Eckelmann 5) release queue slots when purging OGM packets of deactivating slave interface, by Linus Lüssing Patch 2 and 3 have no "Fixes:" tag because the offending commits date back to when batman-adv was not yet officially in the net tree. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 20:42:40 UTC
eb63efb ps3_gelic: fix memcpy parameter The size allocated for target->hwinfo and the number of bytes copied in it should be consistent. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 20:37:56 UTC
14437e3 lan78xx: workaround of forced 100 Full/Half duplex mode error At forced 100 Full & Half duplex mode, chip may fail to set mode correctly when cable is switched between long(~50+m) and short one. As workaround, set to 10 before setting to 100 at forced 100 F/H mode. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 20:36:12 UTC
74d79a2 lan78xx: fix statistics counter error Fix rx_bytes, tx_bytes and tx_frames error in netdev.stats. - rx_bytes counted bytes excluding size of struct ethhdr. - tx_packets didn't count multiple packets in a single urb - tx_bytes included 8 bytes of extra commands. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 20:36:11 UTC
1d9619d net: dsa: mv88e6xxx: fix uninitialized error return The error return err is not initialized and there is a possibility that err is not assigned causing mv88e6xxx_port_bridge_join to return a garbage error return status. Fix this by initializing err to 0. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 20:29:20 UTC
7b74834 net: fix net_gso_ok for new GSO types. Fix casting in net_gso_ok. Otherwise the shift on gso_type << NETIF_F_GSO_SHIFT may hit the 32th bit and make it look like a INT_MIN, which is then promoted from signed to uint64 which is 0xffffffff80000000, resulting in wrong behavior when it is and'ed with the feature itself, as in: This test app: #include <stdio.h> #include <stdint.h> int main(int argc, char **argv) { uint64_t feature1; uint64_t feature2; int gso_type = 1 << 15; feature1 = gso_type << 16; feature2 = (uint64_t)gso_type << 16; printf("%lx %lx\n", feature1, feature2); return 0; } Gives: ffffffff80000000 80000000 So that this: return (features & feature) == feature; Actually works on more bits than expected and invalid ones. Fix is to promote it earlier. Issue noted while rebasing SCTP GSO patch but posting separetely as someone else may experience this meanwhile. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 19:53:17 UTC
62522ef net: ethernet: davinci_emac: Fix devioctl while in fixed link When configured in fixed link, the DaVinci emac driver sets the priv->phydev to NULL and further ioctl calls to the phy_mii_ioctl() causes the kernel to crash. Cc: Brian Hutchinson <b.hutchman@gmail.com> Fixes: 1bb6aa56bb38 ("net: davinci_emac: Add support for fixed-link PHY") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 19:51:25 UTC
eee66af Merge tag 'wireless-drivers-for-davem-2016-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.6 ath9k * fix a couple release old throughput regression on ar9281 iwlwifi * add new device IDs for 8265 * fix a NULL pointer dereference when paging firmware asserts * remove a WARNING on gscan capabilities * fix MODULE_FIRMWARE for 8260 ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 18:23:27 UTC
e00f801 MAINTAINERS: net: update sfc maintainers Add myself and Edward Cree as maintainers. Remove Shradha Shah, who is on extended leave. Cc: David S. Miller <davem@davemloft.net> Cc: Edward Cree <ecree@solarflare.com> Cc: Shradha Shah <sshah@solarflare.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 18:21:15 UTC
dcb4123 sfc: disable RSS when unsupported When certain firmware variants are selected (via the sfboot utility) the SFC7000 and SFC8000 series NICs don't support RSS. The driver still tries (and fails) to insert filters with the RSS flag, and the NIC fails to pass traffic. When the firmware reports RSS_LIMITED suppress allocating a default RSS context. The absence of an RSS context is picked up in filter insertion and RSS flags are discarded. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 18:21:15 UTC
4be2b49 myri10ge: fix sleeping with bh disabled napi_disable() can not be called with bh disabled, move locking just around myri10ge_ss_lock_napi() . Patches fixes following bug: [ 114.278378] BUG: sleeping function called from invalid context at net/core/dev.c:4383 <snip> [ 114.313712] Call Trace: [ 114.314943] [<ffffffff817010ce>] dump_stack+0x19/0x1b [ 114.317673] [<ffffffff810ce7f3>] __might_sleep+0x173/0x230 [ 114.320566] [<ffffffff815b3117>] napi_disable+0x27/0x90 [ 114.323254] [<ffffffffa01e437f>] myri10ge_close+0xbf/0x3f0 [myri10ge] Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Hyong-Youb Kim <hykim@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 18:21:14 UTC
edb9a1b Documentation: networking: fix spelling mistakes Signed-off-by: Eric Engestrom <eric@engestrom.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 28 April 2016, 18:21:13 UTC
7851496 drm/vmwgfx: Fix order of operation mode->hdisplay * (var->bits_per_pixel + 7) gets evaluated before the division, potentially making the pitch larger than it should be. Since the original intention is to do a div-round-up, just use the macro instead. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> 28 April 2016, 18:07:30 UTC
e02e588 drm/vmwgfx: use vmw_cmd_dx_cid_check for query commands. Instead of calling vmw_cmd_ok, call vmw_cmd_dx_cid_check to validate the context id for query commands. Signed-off-by: Charmaine Lee <charmainel@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> 28 April 2016, 18:07:23 UTC
1883598 drm/vmwgfx: Enable SVGA_3D_CMD_DX_SET_PREDICATION Fixes piglit tests nv_conditional_render-* crashes. Signed-off-by: Charmaine Lee <charmainel@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> 28 April 2016, 18:07:15 UTC
e6bd18f IB/security: Restrict use of the write() interface The drivers/infiniband stack uses write() as a replacement for bi-directional ioctl(). This is not safe. There are ways to trigger write calls that result in the return structure that is normally written to user space being shunted off to user specified kernel memory instead. For the immediate repair, detect and deny suspicious accesses to the write API. For long term, update the user space libraries and the kernel API to something that doesn't present the same security vulnerabilities (likely a structured ioctl() interface). The impacted uAPI interfaces are generally only available if hardware from drivers/infiniband is installed in the system. Reported-by: Jann Horn <jann@thejh.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [ Expanded check to all known write() entry points ] Cc: stable@vger.kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com> 28 April 2016, 16:03:16 UTC
7723d8c IB/hfi1: Use kernel default llseek for ui device The ui device llseek had a mistake with SEEK_END and did not fully follow seek semantics. Correct all this by using a kernel supplied function for fixed size devices. Cc: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 28 April 2016, 16:00:39 UTC
back to top