Skip to main content

Browse the archive

swh:1:snp:c3bf2749e3476071fa748f67b0ffa2fdc5fe49d9
sort by:
Revision Author Date Message Commit Date
ab7e2db Linus Torvalds 16 August 2011, 18:14:44 UTC Merge branch 'kvm-updates/3.1' of git://git.kernel.org/pub/scm/virt/kvm/kvm * 'kvm-updates/3.1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: uses TASKSTATS, depends on NET KVM: fix TASK_DELAY_ACCT kconfig warning 16 August 2011, 18:14:44 UTC
4bc9b07 Linus Torvalds 16 August 2011, 17:40:29 UTC Merge branch 'fixallnoconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'fixallnoconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix "allnoconfig" build 16 August 2011, 17:40:29 UTC
22cfb0b Bernd Schubert 16 August 2011, 10:56:54 UTC IPoIB: Fix possible NULL dereference in ipoib_start_xmit() Fix a bug introduced in 69cce1d14049 ("net: Abstract dst->neighbour accesses behind helpers.") where we might dereference skb_dst(skb) even if it is NULL, which causes: [ 240.944030] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [ 240.948007] IP: [<ffffffffa0366ce9>] ipoib_start_xmit+0x39/0x280 [ib_ipoib] [...] [ 240.948007] Call Trace: [ 240.948007] <IRQ> [ 240.948007] [<ffffffff812cd5e0>] dev_hard_start_xmit+0x2a0/0x590 [ 240.948007] [<ffffffff8131f680>] ? arp_create+0x70/0x200 [ 240.948007] [<ffffffff812e8e1f>] sch_direct_xmit+0xef/0x1c0 Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=41212 Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de> Signed-off-by: Roland Dreier <roland@purestorage.com> 16 August 2011, 17:19:20 UTC
df3d8ae Randy Dunlap 02 August 2011, 19:54:31 UTC KVM: uses TASKSTATS, depends on NET CONFIG_TASKSTATS just had a change to use netlink, including a change to "depends on NET". Since "select" does not follow dependencies, KVM also needs to depend on NET to prevent build errors when CONFIG_NET is not enabled. Sample of the reported "undefined reference" build errors: taskstats.c:(.text+0x8f686): undefined reference to `nla_put' taskstats.c:(.text+0x8f721): undefined reference to `nla_reserve' taskstats.c:(.text+0x8f8fb): undefined reference to `init_net' taskstats.c:(.text+0x8f905): undefined reference to `netlink_unicast' taskstats.c:(.text+0x8f934): undefined reference to `kfree_skb' taskstats.c:(.text+0x8f9e9): undefined reference to `skb_clone' taskstats.c:(.text+0x90060): undefined reference to `__alloc_skb' taskstats.c:(.text+0x901e9): undefined reference to `skb_put' taskstats.c:(.init.text+0x4665): undefined reference to `genl_register_family' taskstats.c:(.init.text+0x4699): undefined reference to `genl_register_ops' taskstats.c:(.init.text+0x4710): undefined reference to `genl_unregister_ops' taskstats.c:(.init.text+0x471c): undefined reference to `genl_unregister_family' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> 16 August 2011, 16:00:41 UTC
4fec0e0 Randy Dunlap 16 August 2011, 04:41:43 UTC xen: self-balloon needs module.h Fix build errors (found when CONFIG_SYSFS is not enabled): drivers/xen/xen-selfballoon.c:446: warning: data definition has no type or storage class drivers/xen/xen-selfballoon.c:446: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' drivers/xen/xen-selfballoon.c:446: warning: parameter names (without types) in function declaration drivers/xen/xen-selfballoon.c:485: error: expected declaration specifiers or '...' before string constant drivers/xen/xen-selfballoon.c:485: warning: data definition has no type or storage class drivers/xen/xen-selfballoon.c:485: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/xen/xen-selfballoon.c:485: warning: function declaration isn't a prototype Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 August 2011, 14:23:34 UTC
c3585aa Alan Cox 16 August 2011, 13:18:48 UTC gma500: kill MIPI interface types Kirill Shutemov found problems with the non-upstream IMG driver where the use of extra DRM encoder/connector types caused random crashes when the DRM layer tried to display their matching name. This removes the MIPI types matching the changes Pauli Nieminen made to the non upstream driver set. As Pauli points out: " MIPI (or DSI) is protocol specification on top of LVDS serial bus. That makes it resonable to call MIPI connectors and encoders LVDS." (and indeed they may also be HDMI convertors or similar when we want to report a more useful to end user result) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 August 2011, 14:22:16 UTC
fa71f44 Jeff Layton 08 August 2011, 15:50:24 UTC cifs: demote cERROR in build_path_from_dentry to cFYI Running the cthon tests on a recent kernel caused this message to pop occasionally: CIFS VFS: did not end path lookup where expected namelen is 0 Some added debugging showed that namelen and dfsplen were both 0 when this occurred. That means that the read_seqretry returned true. Assuming that the comment inside the if statement is true, this should be harmless and just means that we raced with a rename. If that is the case, then there's no need for alarm and we can demote this to cFYI. While we're at it, print the dfsplen too so that we can see what happened here if the message pops during debugging. Cc: stable@kernel.org Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> 16 August 2011, 13:07:24 UTC
c503ad4 Takashi Iwai 16 August 2011, 12:23:20 UTC ALSA: hda - Fix duplicated capture-volume creation for ALC268 models Fix the duplicated creation of capture-mixer elements for some static ALC268 configurations. The capture mixers must be put to cap_mixer field instead of mixers array. Signed-off-by: Takashi Iwai <tiwai@suse.de> 16 August 2011, 12:23:20 UTC
b5ddbf4 Stephen Rothwell 15 August 2011, 23:36:06 UTC regmap: using module facilities requires module.h Commit b33f9cbd67ba ("regmap: Specify a module license") added a MODULES_LICENSE to this file without adding an include of module.h. module.h should have been included anyway, since this file has EXPORT_SYMBOLs as well. With the pending module.h split up, this would probably have caused build problems. Cc: Stephen Warren <swarren@nvidia.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 August 2011, 02:28:17 UTC
870d3be Linus Torvalds 16 August 2011, 02:24:42 UTC Merge branch 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs * 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs: Docs: MSI-HOWTO: MSI -> MSIs Docs: MSI-HOWTO: Insert a comma Docs: MSI-HOWTO: can -> could Docs: MSI-HOWTO: Use `unknown ...' rather than `... know about.' Docs: MSI-HOWTO: may -> might Docs: MSI-HOWTO: Insert a comma Docs: MSI-HOWTO: API -> function Docs: MSI-HOWTO: , -> ; Docs: MSI-HOWTO: Move a sentence to another paragraph Docs: MSI-HOWTO: Insert `that' Docs: MSI-HOWTO: Offset modifier with a comma, and insert `yet' for emphasis Docs: MSI-HOWTO: Put the `because' subordinate clause first Docs: MSI-HOWTO: Streamline some wording Docs: MSI-HOWTO: `asked for' -> `requested' Docs: MSI-HOWTO: Use present tense and streamline some wording Docs: MSI-HOWTO: Use the subjunctive, and change `can' to `may' 16 August 2011, 02:24:42 UTC
edb5811 Linus Torvalds 16 August 2011, 02:16:01 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Set HAVE_C_RECORDMCOUNT sparc32: unbreak arch_write_unlock() sparc64: remove unnecessary macros from spinlock_64.h 16 August 2011, 02:16:01 UTC
291b63c Linus Torvalds 16 August 2011, 02:14:18 UTC Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915: Cannot set clock gating under UMS drm/i915: Can't do accurate vblank timestamps with UMS Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support. drm/i915: split out PCH refclk update code drm/i915: show interrupt info on IVB drm/i915: Remove unused 'reg' argument to dp_pipe_enabled drm/i915: Fix PCH port pipe select in CPT disable paths drm/i915: Leave LVDS registers unlocked drm/i915: Wait for LVDS panel power sequence 16 August 2011, 02:14:18 UTC
cedf03b Randy Dunlap 15 August 2011, 17:18:46 UTC x86: fix mm/fault.c build arch/x86/mm/fault.c needs to include asm/vsyscall.h to fix a build error: arch/x86/mm/fault.c: In function '__bad_area_nosemaphore': arch/x86/mm/fault.c:728: error: 'VSYSCALL_START' undeclared (first use in this function) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 August 2011, 02:10:50 UTC
178a296 David S. Miller 15 August 2011, 21:45:17 UTC sparc64: Set HAVE_C_RECORDMCOUNT Signed-off-by: David S. Miller <davem@davemloft.net> 15 August 2011, 21:45:17 UTC
3f6aa0b Mikael Pettersson 15 August 2011, 10:11:50 UTC sparc32: unbreak arch_write_unlock() The sparc32 version of arch_write_unlock() is just a plain assignment. Unfortunately this allows the compiler to schedule side-effects in a protected region to occur after the HW-level unlock, which is broken. E.g., the following trivial test case gets miscompiled: #include <linux/spinlock.h> rwlock_t lock; int counter; void foo(void) { write_lock(&lock); ++counter; write_unlock(&lock); } Fixed by adding a compiler memory barrier to arch_write_unlock(). The sparc64 version combines the barrier and assignment into a single asm(), and implements the operation as a static inline, so that's what I did too. Compile-tested with sparc32_defconfig + CONFIG_SMP=y. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net> 15 August 2011, 21:35:19 UTC
a0fba3e Mikael Pettersson 15 August 2011, 10:10:31 UTC sparc64: remove unnecessary macros from spinlock_64.h The sparc64 spinlock_64.h contains a number of operations defined first as static inline functions, and then as macros with the same names and parameters as the functions. Maybe this was needed at some point in the past, but now nothing seems to depend on these macros (checked with a recursive grep looking for ifdefs on these names). Other archs don't define these identity-macros. So this patch deletes these unnecessary macros. Compile-tested with sparc64_defconfig. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net> 15 August 2011, 21:35:18 UTC
4853aba Jeff Moyer 15 August 2011, 19:37:25 UTC block: fix flush machinery for stacking drivers with differring flush flags Commit ae1b1539622fb46e51b4d13b3f9e5f4c713f86ae, block: reimplement FLUSH/FUA to support merge, introduced a performance regression when running any sort of fsyncing workload using dm-multipath and certain storage (in our case, an HP EVA). The test I ran was fs_mark, and it dropped from ~800 files/sec on ext4 to ~100 files/sec. It turns out that dm-multipath always advertised flush+fua support, and passed commands on down the stack, where those flags used to get stripped off. The above commit changed that behavior: static inline struct request *__elv_next_request(struct request_queue *q) { struct request *rq; while (1) { - while (!list_empty(&q->queue_head)) { + if (!list_empty(&q->queue_head)) { rq = list_entry_rq(q->queue_head.next); - if (!(rq->cmd_flags & (REQ_FLUSH | REQ_FUA)) || - (rq->cmd_flags & REQ_FLUSH_SEQ)) - return rq; - rq = blk_do_flush(q, rq); - if (rq) - return rq; + return rq; } Note that previously, a command would come in here, have REQ_FLUSH|REQ_FUA set, and then get handed off to blk_do_flush: struct request *blk_do_flush(struct request_queue *q, struct request *rq) { unsigned int fflags = q->flush_flags; /* may change, cache it */ bool has_flush = fflags & REQ_FLUSH, has_fua = fflags & REQ_FUA; bool do_preflush = has_flush && (rq->cmd_flags & REQ_FLUSH); bool do_postflush = has_flush && !has_fua && (rq->cmd_flags & REQ_FUA); unsigned skip = 0; ... if (blk_rq_sectors(rq) && !do_preflush && !do_postflush) { rq->cmd_flags &= ~REQ_FLUSH; if (!has_fua) rq->cmd_flags &= ~REQ_FUA; return rq; } So, the flush machinery was bypassed in such cases (q->flush_flags == 0 && rq->cmd_flags & (REQ_FLUSH|REQ_FUA)). Now, however, we don't get into the flush machinery at all. Instead, __elv_next_request just hands a request with flush and fua bits set to the scsi_request_fn, even if the underlying request_queue does not support flush or fua. The agreed upon approach is to fix the flush machinery to allow stacking. While this isn't used in practice (since there is only one request-based dm target, and that target will now reflect the flush flags of the underlying device), it does future-proof the solution, and make it function as designed. In order to make this work, I had to add a field to the struct request, inside the flush structure (to store the original req->end_io). Shaohua had suggested overloading the union with rb_node and completion_data, but the completion data is used by device mapper and can also be used by other drivers. So, I didn't see a way around the additional field. I tested this patch on an HP EVA with both ext4 and xfs, and it recovers the lost performance. Comments and other testers, as always, are appreciated. Cheers, Jeff Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> 15 August 2011, 19:37:25 UTC
92b79f4 Keith Packard 13 August 2011, 00:07:18 UTC drm/i915: Cannot set clock gating under UMS The clock gating functions are only assigned under KMS, so don't try to call them under UMS. Signed-off-by: Keith Packard <keithp@keithp.com> Tested-by: Justin P. Mattock <justinmattock@gmail.com> 15 August 2011, 19:10:27 UTC
c3613de Keith Packard 13 August 2011, 00:05:54 UTC drm/i915: Can't do accurate vblank timestamps with UMS Disable this feature when KMS is not running by setting the driver->get_vblank_timestamp function pointer to NULL. Signed-off-by: Keith Packard <keithp@keithp.com> Tested-by: Justin P. Mattock <justinmattock@gmail.com> 15 August 2011, 19:10:26 UTC
aaa6fd2 Matthew Garrett 12 August 2011, 10:11:33 UTC Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Airlie <airlied@linux.ie> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> Tested-by: Michel Alexandre Salim <salimma@fedoraproject.org> Tested-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Keith Packard <keithp@keithp.com> 15 August 2011, 19:10:25 UTC
2f6a123 Linus Torvalds 15 August 2011, 15:46:11 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: allow booting guest with CONFIG_RELOCATABLE=y virtio: Add text copy of spec to Documentation/virtual. 15 August 2011, 15:46:11 UTC
6f02bfc Linus Torvalds 15 August 2011, 15:40:49 UTC Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: fix DMA unmapping in an error path firewire: cdev: fix 32 bit userland on 64 bit kernel compat corner cases 15 August 2011, 15:40:49 UTC
a0b3447 Linus Torvalds 15 August 2011, 15:40:24 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6: jfs: flush journal completely before releasing metadata inodes 15 August 2011, 15:40:24 UTC
4cb5aa1 Linus Torvalds 15 August 2011, 15:39:10 UTC Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: don't try to be smart in the hpd handler drm/radeon: re-POST the asic on Apple hardware when booted via EFI drm/radeon: Allow panel preferred EDID to override BIOS native mode drm/radeon/kms: make some watermark messages debug only drm/radeon/kms: fix regression is handling >2 heads on cedar/caicos drm/radeon/kms: don't enable connectors that are off in the hotplug handler 15 August 2011, 15:39:10 UTC
aa2b1cf Linus Torvalds 15 August 2011, 15:36:30 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: Do not set cifs/ntfs acl using a file handle (try #4) [CIFS] Cleanup use of CONFIG_CIFS_STATS2 ifdef to make transport routines more readable 15 August 2011, 15:36:30 UTC
259a534 Linus Torvalds 15 August 2011, 15:35:54 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Specify a module license regmap: Fix bulk reads 15 August 2011, 15:35:54 UTC
d5811e8 Alex Deucher 13 August 2011, 17:36:13 UTC drm/radeon/kms: don't try to be smart in the hpd handler Attempting to try and turn off disconnected display hw in the hotput handler lead to more problems than it helped. For now just register an event and only attempt the do something interesting with DP. Other connectors are just too problematic: - Some systems have an HPD pin assigned to LVDS, but it's rarely if ever connected properly and we don't really care about hpd events on LVDS anyway since it's always connected. - The HPD pin is wired up correctly for eDP, but we don't really have to do anything since the events since it's always connected. - Some HPD pins fire more than once when you connect/disconnect - etc. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=39882 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 15 August 2011, 08:44:12 UTC
eade7b2 Daniel T Chen 15 August 2011, 02:43:01 UTC ALSA: ac97: Add HP Compaq dc5100 SFF(PT003AW) to Headphone Jack Sense whitelist BugLink: https://bugs.launchpad.net/bugs/826081 The original reporter needs 'Headphone Jack Sense' enabled to have audible audio, so add his PCI SSID to the whitelist. Reported-and-tested-by: Muhammad Khurram Khan Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 15 August 2011, 08:26:37 UTC
e22a539 Rusty Russell 15 August 2011, 00:45:10 UTC lguest: allow booting guest with CONFIG_RELOCATABLE=y The CONFIG_RELOCATABLE code tries to align the unpack destination to the value of 'kernel_alignment' in the setup_hdr. If that's 0, it tries to unpack to address 0, which in fact causes the gunzip code to call 'error("Out of memory while allocating output buffer")'. The bootloader (ie. the lguest Launcher in this case) should be doing setting this field; the normal bzImage is 16M, we can use the same. Reported-by: Stefanos Geraggelos <sgerag@cslab.ece.ntua.gr> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org 15 August 2011, 00:45:10 UTC
c3c53a0 Rusty Russell 15 August 2011, 00:45:10 UTC virtio: Add text copy of spec to Documentation/virtual. As suggested by Christoph Hellwig. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 15 August 2011, 00:45:10 UTC
93ee7a9 Linus Torvalds 14 August 2011, 22:09:08 UTC Linux 3.1-rc2 14 August 2011, 22:09:08 UTC
f982f91 Clemens Ladisch 21 June 2011, 20:09:50 UTC mm: fix wrong vmap address calculations with odd NR_CPUS values Commit db64fe02258f ("mm: rewrite vmap layer") introduced code that does address calculations under the assumption that VMAP_BLOCK_SIZE is a power of two. However, this might not be true if CONFIG_NR_CPUS is not set to a power of two. Wrong vmap_block index/offset values could lead to memory corruption. However, this has never been observed in practice (or never been diagnosed correctly); what caught this was the BUG_ON in vb_alloc() that checks for inconsistent vmap_block indices. To fix this, ensure that VMAP_BLOCK_SIZE always is a power of two. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=31572 Reported-by: Pavel Kysilka <goldenfish@linuxsoft.cz> Reported-by: Matias A. Fonzo <selk@dragora.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Nick Piggin <npiggin@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: 2.6.28+ <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2011, 19:32:52 UTC
97c24d1 Linus Torvalds 14 August 2011, 19:28:15 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: remove unused "ddr" parameter in struct mmc_ios mmc: dw_mmc: Fix DDR mode support. mmc: core: use defined R1_STATE_PRG macro for card status mmc: sdhci: use f_max instead of host->clock for timeouts mmc: sdhci: move timeout_clk calculation farther down mmc: sdhci: check host->clock before using it as a denominator mmc: Revert "mmc: sdhci: Fix SDHCI_QUIRK_TIMEOUT_USES_SDCLK" mmc: tmio: eliminate unused variable 'mmc' warning mmc: esdhc-imx: fix card interrupt loss on freescale eSDHC mmc: sdhci-s3c: Fix build for header change mmc: dw_mmc: Fix mask in IDMAC_SET_BUFFER1_SIZE macro mmc: cb710: fix possible pci_dev leak in cb710_pci_configure() mmc: core: Detect eMMC v4.5 ext_csd entries mmc: mmc_test: avoid stalled file in debugfs mmc: sdhci-s3c: add BROKEN_ADMA_ZEROLEN_DESC quirk mmc: sdhci: pxav3: controller needs 32 bit ADMA addressing mmc: sdhci: fix retuning timer wrongly deleted in sdhci_tasklet_finish 14 August 2011, 19:28:15 UTC
da6094e Daniel Mack 14 August 2011, 09:31:16 UTC ALSA: snd_usb_caiaq: track submitted output urbs The snd_usb_caiaq driver currently assumes that output urbs are serviced in time and doesn't track when and whether they are given back by the USB core. That usually works fine, but due to temporary limitations of the XHCI stack, we faced that urbs were submitted more than once with this approach. As it's no good practice to fire and forget urbs anyway, this patch introduces a proper bit mask to track which requests have been submitted and given back. That alone however doesn't make the driver work in case the host controller is broken and doesn't give back urbs at all, and the output stream will stop once all pre-allocated output urbs are consumed. But it does prevent crashes of the controller stack in such cases. See http://bugzilla.kernel.org/show_bug.cgi?id=40702 for more details. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Matej Laitl <matej@laitl.cz> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> 14 August 2011, 16:10:43 UTC
17f2ae7 Rafael J. Wysocki 14 August 2011, 11:34:31 UTC PM / Domains: Fix build for CONFIG_PM_RUNTIME unset Function genpd_queue_power_off_work() is not defined for CONFIG_PM_RUNTIME, so pm_genpd_poweroff_unused() causes a build error to happen in that case. Fix the problem by making pm_genpd_poweroff_unused() depend on CONFIG_PM_RUNTIME too. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 14 August 2011, 11:34:31 UTC
bdc2209 Ingo Molnar 14 August 2011, 09:48:29 UTC Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent 14 August 2011, 09:48:29 UTC
91d85ea Linus Torvalds 14 August 2011, 01:37:28 UTC Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (ibmaem) add missing kfree hwmon: (pmbus/lm25066) Ignore byte writes to non-zero pages hwmon: (pmbus) Virtualize pmbus_write_byte 14 August 2011, 01:37:28 UTC
1798778 Linus Torvalds 14 August 2011, 01:36:28 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: Fix compile warning in wm8750.c ASoC: omap: Update e-mail address of Jarkko Nikula ASoC: SAMSUNG: Add I2S0 internal dma driver ASoC: Terminate WM8750 SPI device ID table ASoC: Add missing break in WM8994 probe ALSA: snd-usb-caiaq: Correct offset fields of outbound iso_frame_desc ALSA: azt3328 - adjust error handling code to include debugging code ALSA: hda - Add CONFIG_SND_HDA_POWER_SAVE to stac_vrefout_set() ALSA: usb-audio - Add quirk for BOSS Micro BR-80 ASoC: Fix typo in wm8750 spi_ids ASoC: Fix warning in Speyside WM8962 ASoC: Fix SPI driver binding for WM8987 ASoC: Fix binding of WM8750 on Jive ASoC: WM8903: Free IRQ on device removal ASoC: Tegra: wm8903 machine driver: Allow re-insertion of module ASoC: Tegra: tegra_pcm_deallocate_dma_buffer: Don't OOPS 14 August 2011, 01:36:28 UTC
4c74916 Marcos Souza 13 August 2011, 19:34:59 UTC Documentation: befs.txt: no maintainer, orphaned Remove the name of Sergey Kostyliov as maintainer of befs. In the MAINTAINERS file, befs is orphaned. Signed-off-by: Marcos Souza <marcos.mage@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2011, 01:34:03 UTC
399e1d9 Ralf Thielow 13 August 2011, 19:34:57 UTC Documentation: SubmittingDrivers: fix Linus's git tree URL Change resource URL to new git tree - (http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git). Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2011, 01:34:03 UTC
4126dac Sergiu Iordache 13 August 2011, 19:34:56 UTC Documentation: add Ramoops usage description Add a documentation file describing the usage of Ramoops Signed-off-by: Sergiu Iordache <sergiu@chromium.org> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2011, 01:34:03 UTC
6989b5b Paul Mcquade 13 August 2011, 19:34:54 UTC Documentation: email-clients: Add better Thunderbird information Add better Thunderbird information. Add Thunderbird Registry instructions to: Enable UTF8 & Preformat mode Disable HTML mode Signed-off-by: Paul McQuade <paulmcquad@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2011, 01:34:03 UTC
1629024 Randy Dunlap 13 August 2011, 19:34:52 UTC Documentation: kernel-parameters.txt cleanups General cleanups to kernel-parameters.txt: - add missing $ARCH that are being used/referenced - alphabetize the parameter restrictions list - spell "IA-64" as listed in arch/ia64/Kconfig instead of "IA64" - remove trailing whitespace - use hyphen in 32-bit etc. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2011, 01:34:02 UTC
ac1667d Stephen Boyd 13 August 2011, 19:34:50 UTC Documentation: add ARM user_debug to kernel-parameters.txt Usually kernel parameters are documented in kernel-parameters.txt but user_debug is only documented in the Kconfig. Document the option and point to the Kconfig help text for more info. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2011, 01:34:02 UTC
3c8429a Luis de Bethencourt 13 August 2011, 19:34:47 UTC Documentation: drop Linux Source Driver from kernel-docs references Dropping LSD (Linux Source Driver) since it hasn't been available for a long time. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2011, 01:34:02 UTC
db12fb8 Zac Storer 13 August 2011, 19:34:45 UTC Documentation: fix spelling error in SubmittingPatches Fixed a spelling error. Signed-off-by: Zac Storer <zac.3.14159@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2011, 01:34:02 UTC
7fd781e Jaehoon Chung 08 August 2011, 09:10:52 UTC mmc: remove unused "ddr" parameter in struct mmc_ios "mmc: dw_mmc: Fix DDR mode support" removed the last user. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org> 13 August 2011, 18:50:32 UTC
6daa777 Seungwon Jeon 05 August 2011, 03:35:03 UTC mmc: dw_mmc: Fix DDR mode support. Host driver can't get a hint of DDR mode through ios->ddr flag anymore. ios->timing is currently used to inform DDR mode as a substitute. And capability of MMC_CAP_MMC_HIGHSPEED is added for DDR support. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org> 13 August 2011, 18:50:32 UTC
7435bb7 Jaehoon Chung 10 August 2011, 09:46:28 UTC mmc: core: use defined R1_STATE_PRG macro for card status Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org> 13 August 2011, 18:50:31 UTC
65be3fe Andy Shevchenko 03 August 2011, 15:36:01 UTC mmc: sdhci: use f_max instead of host->clock for timeouts When timeout_clk is calculated the host->clock could be zero. So, instead of host->clock the calculation now uses mmc->f_max. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Chris Ball <cjb@laptop.org> 13 August 2011, 18:50:30 UTC
272308c Andy Shevchenko 03 August 2011, 15:36:00 UTC mmc: sdhci: move timeout_clk calculation farther down This moves the calculation below the assignment of mmc->f_max, which we need for calculating timeout_clk in the next patch in this series. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chris Ball <cjb@laptop.org> 13 August 2011, 18:50:29 UTC
78a2ca2 Andy Shevchenko 03 August 2011, 15:35:59 UTC mmc: sdhci: check host->clock before using it as a denominator Sometimes host->clock could be zero which is a legal situation. This patch checks host->clock before usage as a denominator when timeout is calculated. A similar patch is applied for mmc core (see commit e9b8684, "mmc: fix division by zero in MMC core"). Without this patch, the execution of the sdhci_calc_timeout could end up with a backtrace: <0>[ 4.014319] divide error: 0000 [#1] PREEMPT SMP <4>[ 4.014352] Modules linked in: g_ether <4>[ 4.014376] <4>[ 4.014393] Pid: 33, comm: kworker/u:2 Not tainted 3.0.0+ #646 <4>[ 4.014421] EIP: 0060:[<c12fa38e>] EFLAGS: 00010046 CPU: 1 <4>[ 4.014449] EIP is at sdhci_calc_timeout+0x2e/0x100 <4>[ 4.014468] EAX: 00000000 EBX: f5930fc8 ECX: 00000000 EDX: 00000000 <4>[ 4.014488] ESI: f5291de8 EDI: f5291db8 EBP: f5291c6c ESP: f5291c50 <4>[ 4.014508] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 <0>[ 4.014529] Process kworker/u:2 (pid: 33, ti=f5290000 task=f53065a0 task.ti=f5290000) <0>[ 4.014546] Stack: <4>[ 4.014557] 00000082 c1054fdd f5291c78 04000000 f5930fc8 f5291de8 f5291db8 f5291cac <4>[ 4.014611] c12fab7c c107a98b f5291c88 c13b6d3f f593109c f5882000 f5291cac c1054fdd <4>[ 4.014663] 00000000 00000000 f5882000 00000082 f5930fc8 f5291db8 0000000a f5291ccc <0>[ 4.014716] Call Trace: <4>[ 4.014743] [<c1054fdd>] ? mod_timer+0x11d/0x380 <4>[ 4.014770] [<c12fab7c>] sdhci_prepare_data+0x2c/0x3a0 <4>[ 4.014798] [<c107a98b>] ? trace_hardirqs_off+0xb/0x10 <4>[ 4.014827] [<c13b6d3f>] ? _raw_spin_unlock_irqrestore+0x2f/0x60 <4>[ 4.014854] [<c1054fdd>] ? mod_timer+0x11d/0x380 <4>[ 4.014880] [<c12fc7db>] sdhci_send_command+0xdb/0x210 <4>[ 4.014906] [<c12fd5f3>] sdhci_request+0xc3/0x150 <4>[ 4.014932] [<c12ec56a>] mmc_start_request+0xda/0x200 <4>[ 4.014960] [<c120d7c2>] ? __raw_spin_lock_init+0x32/0x60 <4>[ 4.014989] [<c1066a85>] ? __init_waitqueue_head+0x35/0x50 <4>[ 4.015015] [<c12ec70b>] mmc_wait_for_req+0x7b/0x90 <4>[ 4.015045] [<c12f0c67>] mmc_send_cxd_data+0xf7/0x130 <4>[ 4.015076] [<c12ecbc0>] ? mmc_erase+0x140/0x140 <4>[ 4.015102] [<c12f139d>] mmc_send_ext_csd+0x1d/0x20 <4>[ 4.015125] [<c12efef0>] mmc_get_ext_csd+0x70/0x140 <4>[ 4.015151] [<c12effe8>] mmc_compare_ext_csds+0x28/0x190 <4>[ 4.015176] [<c12f039f>] mmc_init_card+0x24f/0x650 <4>[ 4.015201] [<c13b6d5d>] ? _raw_spin_unlock_irqrestore+0x4d/0x60 <4>[ 4.015226] [<c107fd9c>] ? trace_hardirqs_on_caller+0x11c/0x160 <4>[ 4.015255] [<c12f09a4>] mmc_attach_mmc+0xa4/0x190 <4>[ 4.015282] [<c12ee3f0>] mmc_rescan+0x210/0x240 <4>[ 4.015311] [<c105f9b6>] process_one_work+0x176/0x550 <4>[ 4.015336] [<c105f93a>] ? process_one_work+0xfa/0x550 <4>[ 4.015360] [<c12ee1e0>] ? mmc_init_erase+0x140/0x140 <4>[ 4.015385] [<c1061c2a>] worker_thread+0x12a/0x2c0 <4>[ 4.015410] [<c1061b00>] ? manage_workers.clone.18+0x100/0x100 <4>[ 4.015437] [<c1066244>] kthread+0x74/0x80 <4>[ 4.015463] [<c10661d0>] ? __init_kthread_worker+0x60/0x60 <4>[ 4.015490] [<c13b7dfa>] kernel_thread_helper+0x6/0xd <0>[ 4.015507] Code: 57 89 d7 56 53 89 c3 83 ec 10 8b 40 04 8b 72 28 f6 c4 10 89 45 f0 0f 85 91 00 00 00 85 f6 0f 84 c1 00 00 00 8b 4e 04 31 d2 89 c8 <f7> 73 58 ba d3 4d 62 10 89 c1 8b 06 f7 e2 c1 ea 06 01 d1 f7 45 <0>[ 4.015829] EIP: [<c12fa38e>] sdhci_calc_timeout+0x2e/0x100 SS:ESP 0068:f5291c50 Reported-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chris Ball <cjb@laptop.org> 13 August 2011, 18:50:28 UTC
83cbcd9 Andy Shevchenko 03 August 2011, 15:35:58 UTC mmc: Revert "mmc: sdhci: Fix SDHCI_QUIRK_TIMEOUT_USES_SDCLK" This reverts commit 4b01681c7764, which introduced a new potential divide by zero in the process of fixing one. The subsequent commits attempt to fix the issue properly. Signed-off-by: Chris Ball <cjb@laptop.org> 13 August 2011, 18:50:27 UTC
4906baf Axel Lin 03 August 2011, 06:48:58 UTC mmc: tmio: eliminate unused variable 'mmc' warning Fix below compile warning: CC drivers/mmc/host/tmio_mmc.o drivers/mmc/host/tmio_mmc.c: In function 'tmio_mmc_suspend': drivers/mmc/host/tmio_mmc.c:30: warning: unused variable 'mmc' drivers/mmc/host/tmio_mmc.c: In function 'tmio_mmc_resume': drivers/mmc/host/tmio_mmc.c:45: warning: unused variable 'mmc' Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org> 13 August 2011, 18:50:27 UTC
0d58864 Tony Lin 11 August 2011, 20:45:59 UTC mmc: esdhc-imx: fix card interrupt loss on freescale eSDHC Apply a workaround for the imx eSDHC controller to avoid missing card interrupts. This makes SDIO work. Signed-off-by: Tony Lin <tony.lin@freescale.com> Signed-off-by: Chris Ball <cjb@laptop.org> 13 August 2011, 18:50:26 UTC
55156d2 Mark Brown 29 July 2011, 14:35:00 UTC mmc: sdhci-s3c: Fix build for header change A header change has removed an implicit inclusion of module.h, breaking the build due to the use of THIS_MODULE. Fix that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Chris Ball <cjb@laptop.org> 13 August 2011, 18:50:25 UTC
9b7bbe1 Shashidhar Hiremath 29 July 2011, 12:49:50 UTC mmc: dw_mmc: Fix mask in IDMAC_SET_BUFFER1_SIZE macro The mask used inside this macro was assuming Buffer_Size1's [BS1's] width to be 14 bits, it is actually 13 bits. Modify masks used in IDMAC_SET_BUFFER1_SIZE such that they use only 13 bits instead of current 14. Signed-off-by: Shashidhar Hiremath <shashidharh@vayavyalabs.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org> 13 August 2011, 18:50:24 UTC
1ccd4b7 Michał Mirosław 28 July 2011, 18:55:27 UTC mmc: cb710: fix possible pci_dev leak in cb710_pci_configure() Reported-by: Julia Lawall <julia@diku.dk> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Chris Ball <cjb@laptop.org> 13 August 2011, 18:50:23 UTC
38ca285 Kyungmin Park 26 July 2011, 08:12:37 UTC mmc: core: Detect eMMC v4.5 ext_csd entries The eMMC v4.5 Spec is released now: EXT_CSD_REV Extended CSD Revision 255-7 Reserved 6 Revision 1.6 (for MMC v4.5) 5 Revision 1.5 (for MMV v4.41) ... Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org> 13 August 2011, 18:50:22 UTC
d5a5bd1 Andy Shevchenko 22 July 2011, 13:13:36 UTC mmc: mmc_test: avoid stalled file in debugfs During card removal and inserting cycle the test file in the debugfs could be stalled until the host driver removes it. Let's keep the file in the linked list and destroy it when card is removed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> 13 August 2011, 18:50:22 UTC
7199e2b Jaehoon Chung 12 July 2011, 08:30:47 UTC mmc: sdhci-s3c: add BROKEN_ADMA_ZEROLEN_DESC quirk Samsung SoCs need to set BROKEN_ADMA_ZEROLEN_DESC. (If ADMA operation is more than 65535, maybe set by zero.) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org> 13 August 2011, 18:50:21 UTC
606a15e Philip Rakity 11 July 2011, 21:47:54 UTC mmc: sdhci: pxav3: controller needs 32 bit ADMA addressing Enable the quirk. (Best used in conjunction with patch downgrading ADMA to SDMA when transfer is not aligned.) Signed-off-by: Philip Rakity <prakity@marvell.com> Acked-by: Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org> 13 August 2011, 18:50:20 UTC
7886961 Aaron Lu 11 July 2011, 05:27:11 UTC mmc: sdhci: fix retuning timer wrongly deleted in sdhci_tasklet_finish Currently, the retuning timer for retuning mode 1 will be deleted in function sdhci_tasklet_finish after a mmc request done, which will make retuning timing never trigger again. This patch fixed this problem. Signed-off-by: Aaron Lu <Aaron.Lu@amd.com> Reviewed-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org> 13 August 2011, 18:50:19 UTC
9dd75f1 Theodore Ts'o 13 August 2011, 16:58:21 UTC ext4: fix nomblk_io_submit option so it correctly converts uninit blocks Bug discovered by Jan Kara: Finally, commit 1449032be17abb69116dbc393f67ceb8bd034f92 returned back the old IO submission code but apparently it forgot to return the old handling of uninitialized buffers so we unconditionnaly call block_write_full_page() without specifying end_io function. So AFAICS we never convert unwritten extents to written in some cases. For example when I mount the fs as: mount -t ext4 -o nomblk_io_submit,dioread_nolock /dev/ubdb /mnt and do int fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC, 0600); char buf[1024]; memset(buf, 'a', sizeof(buf)); fallocate(fd, 0, 0, 16384); write(fd, buf, sizeof(buf)); I get a file full of zeros (after remounting the filesystem so that pagecache is dropped) instead of seeing the first KB contain 'a's. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org 13 August 2011, 16:58:21 UTC
32c80b3 Tao Ma 13 August 2011, 16:30:59 UTC ext4: Resolve the hang of direct i/o read in handling EXT4_IO_END_UNWRITTEN. EXT4_IO_END_UNWRITTEN flag set and the increase of i_aiodio_unwritten should be done simultaneously since ext4_end_io_nolock always clear the flag and decrease the counter in the same time. We don't increase i_aiodio_unwritten when setting EXT4_IO_END_UNWRITTEN so it will go nagative and causes some process to wait forever. Part of the patch came from Eric in his e-mail, but it doesn't fix the problem met by Michael actually. http://marc.info/?l=linux-ext4&m=131316851417460&w=2 Reported-and-Tested-by: Michael Tokarev<mjt@tls.msk.ru> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org 13 August 2011, 16:30:59 UTC
2581fdc Jiaying Zhang 13 August 2011, 16:17:13 UTC ext4: call ext4_ioend_wait and ext4_flush_completed_IO in ext4_evict_inode Flush inode's i_completed_io_list before calling ext4_io_wait to prevent the following deadlock scenario: A page fault happens while some process is writing inode A. During page fault, shrink_icache_memory is called that in turn evicts another inode B. Inode B has some pending io_end work so it calls ext4_ioend_wait() that waits for inode B's i_ioend_count to become zero. However, inode B's ioend work was queued behind some of inode A's ioend work on the same cpu's ext4-dio-unwritten workqueue. As the ext4-dio-unwritten thread on that cpu is processing inode A's ioend work, it tries to grab inode A's i_mutex lock. Since the i_mutex lock of inode A is still hold before the page fault happened, we enter a deadlock. Also moves ext4_flush_completed_IO and ext4_ioend_wait from ext4_destroy_inode() to ext4_evict_inode(). During inode deleteion, ext4_evict_inode() is called before ext4_destroy_inode() and in ext4_evict_inode(), we may call ext4_truncate() without holding i_mutex lock. As a result, there is a race between flush_completed_IO that is called from ext4_ext_truncate() and ext4_end_io_work, which may cause corruption on an io_end structure. This change moves ext4_flush_completed_IO and ext4_ioend_wait from ext4_destroy_inode() to ext4_evict_inode() to resolve the race between ext4_truncate() and ext4_end_io_work during inode deletion. Signed-off-by: Jiaying Zhang <jiayingz@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org 13 August 2011, 16:17:13 UTC
441c850 Curt Wohlgemuth 13 August 2011, 15:25:18 UTC ext4: Fix ext4_should_writeback_data() for no-journal mode ext4_should_writeback_data() had an incorrect sequence of tests to determine if it should return 0 or 1: in particular, even in no-journal mode, 0 was being returned for a non-regular-file inode. This meant that, in non-journal mode, we would use ext4_journalled_aops for directories, symlinks, and other non-regular files. However, calling journalled aop callbacks when there is no valid handle, can cause problems. This would cause a kernel crash with Jan Kara's commit 2d859db3e4 ("ext4: fix data corruption in inodes with journalled data"), because we now dereference 'handle' in ext4_journalled_write_end(). I also added BUG_ONs to check for a valid handle in the obviously journal-only aops callbacks. I tested this running xfstests with a scratch device in these modes: - no-journal - data=ordered - data=writeback - data=journal All work fine; the data=journal run has many failures and a crash in xfstests 074, but this is no different from a vanilla kernel. Signed-off-by: Curt Wohlgemuth <curtw@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org 13 August 2011, 15:25:18 UTC
aaff120 Stefan Richter 07 August 2011, 13:20:18 UTC firewire: core: handle ack_busy when fetching the Config ROM Some older Panasonic made camcorders (Panasonic AG-EZ30 and NV-DX110, Grundig Scenos DLC 2000) reject requests with ack_busy_X if a request is sent immediately after they sent a response to a prior transaction. This causes firewire-core to fail probing of the camcorder with "giving up on config rom for node id ...". Consequently, programs like kino or dvgrab are unaware of the presence of a camcorder. Such transaction failures happen also with the ieee1394 driver stack (of the 2.4...2.6 kernel series until 2.6.36 inclusive) but with a lower likelihood, such that kino or dvgrab are generally able to use these camcorders via the older driver stack. The cause for firewire-ohci's or firewire-core's worse behavior is not yet known. Gap count optimization in firewire-core is not the cause. Perhaps the slightly higher latency of transaction completion in the older stack plays a role. (ieee1394: AR-resp DMA context tasklet -> packet completion ktread -> user process; firewire-core: tasklet -> user process.) This change introduces retries and delays after ack_busy_X into firewire-core's Config ROM reader, such that at least firewire-core's probing and /dev/fw* creation are successful. This still leaves the problem that userland processes are facing transaction failures. gscanbus's built-in retry routines deal with them successfully, but neither kino's nor dvgrab's do ever succeed. But at least DV capture with "dvgrab -noavc -card 0" works now. Live video preview in kino works too, but not actual capture. One way to prevent Configuration ROM reading failures in application programs is to modify libraw1394 to synthesize read responses by means of firewire-core's Configuration ROM cache. This would only leave CMP and FCP transaction failures as a potential problem source for applications. Reported-and-tested-by: Thomas Seilund <tps@netmaster.dk> Reported-and-tested-by: René Fritz <rene@colorcube.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> 13 August 2011, 11:53:30 UTC
73e0881 Linus Torvalds 13 August 2011, 04:59:09 UTC Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6 * 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: dt: add empty of_get_property for non-dt 13 August 2011, 04:59:09 UTC
e211bc8 Linus Torvalds 13 August 2011, 04:56:53 UTC Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (30 commits) USB: Serial: Add PID(0xF7C0) to FTDI SIO driver for a zeitcontrol-device USB: Serial: Add device ID for Sierra Wireless MC8305 USB: Serial: Added device ID for Qualcomm Modem in Sagemcom's HiLo3G usb/host/pci-quirks.c: correct annotation of `ehci_dmi_nohandoff_table' USB: option driver: add PID for Vodafone-Huawei K4511 USB: option driver: add PID for Vodafone-Huawei K4510 USB: option driver: add PID for Vodafone-Huawei K3771 USB: option driver: add PID for Vodafone-Huawei K3770 usb: serial: ftdi_sio.c: For the FT232H FTDI_SIO_SET_BAUDRATE_REQUEST, index needs to be shifted too usb/isp1760: Added missing call to usb_hcd_check_unlink_urb() during unlink USB: EHCI: Fix test mode sequence USB: ftdi_sio: fix minor typo in get_ftdi_divisor USB: at91_udc: include linux/prefetch.h explicitly USB: usb-storage: unusual_devs entry for ARM V2M motherboard. usb/ehci-mxc: add missing inclusion of mach/hardware.h USB: assign instead of equal in usbtmc.c usb: renesas_usbhs: fixup usbhsg_for_each_uep 1st pos usb: renesas_usbhs: fix DMA build by including dma-mapping.h usb: gadget: net2272 - Correct includes usb: musb: fix oops on musb_gadget_pullup ... 13 August 2011, 04:56:53 UTC
8c70aac Linus Torvalds 13 August 2011, 03:55:49 UTC Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: zcache: Fix build error when sysfs is not defined zcache: Use div_u64 for 64-bit division staging:rts_pstor: fix thread synchronization flow drivers:staging:solo6x10:add the missed slab.h staging: zcache: include module.h for MODULE_LICENSE drivers/staging/hv/blkvsc_drv.c: eliminate NULL pointer dereference Staging: Add clk API note to nvec/TODO drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsparser.c: adjust array index staging: more missing slab.h inclusions drivers/staging/solo6x10/p2m.c needs slab.h drivers/staging/solo6x10/core.c needs slab.h drivers/staging/dt3155v4l/dt3155v4l.c needs slab.h drivers/staging/speakup/devsynth.c: fix "buffer size is not provably correct" error Staging: iio: add some unlocks to raw_read() functions staging: ft1000_proc needs asm/io.h for inw/outw on sparc staging: rtl8192u: declare MODULE_FIRMWARE gma500: Fix clashes with DRM updates staging: zcache: module is GPL staging: fix zcache building 13 August 2011, 03:55:49 UTC
06e727d Linus Torvalds 13 August 2011, 03:46:24 UTC Merge branch 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-tip * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-tip: x86-64: Rework vsyscall emulation and add vsyscall= parameter x86-64: Wire up getcpu syscall x86: Remove unnecessary compile flag tweaks for vsyscall code x86-64: Add vsyscall:emulate_vsyscall trace event x86-64: Add user_64bit_mode paravirt op x86-64, xen: Enable the vvar mapping x86-64: Work around gold bug 13023 x86-64: Move the "user" vsyscall segment out of the data segment. x86-64: Pad vDSO to a page boundary 13 August 2011, 03:46:24 UTC
e68ff9c Linus Torvalds 13 August 2011, 03:43:01 UTC Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs * 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: replace xfs_buf_geterror() with bp->b_error xfs: Check the return value of xfs_buf_read() for NULL "xfs: fix error handling for synchronous writes" revisited xfs: set cursor in xfs_ail_splice() even when AIL was empty xfs: Remove the macro XFS_BUFTARG_NAME xfs: Remove the macro XFS_BUF_TARGET xfs: Remove the macro XFS_BUF_SET_TARGET Replace the macro XFS_BUF_ISPINNED with helper xfs_buf_ispinned xfs: Remove the macro XFS_BUF_SET_PTR xfs: Remove the macro XFS_BUF_PTR xfs: Remove macro XFS_BUF_SET_START xfs: Remove macro XFS_BUF_HOLD xfs: Remove macro XFS_BUF_BUSY and family xfs: Remove the macro XFS_BUF_ERROR and family xfs: Remove the macro XFS_BUF_BFLAGS 13 August 2011, 03:43:01 UTC
c44efba Linus Torvalds 13 August 2011, 03:42:02 UTC Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (32 commits) ARM: mmp: Change the way we use timer 0 as clockevent timer. ARM: mmp: Switch to using timer 1 as clocksource timer. ARM: mmp: Also start timer 1 on boot. ARM: pxa168/gplugd: free correct GPIO ARM: pxa168/gplugd: get rid of mfp-gplugd.h ARM: pxa: fix logic error in PJ4 iWMMXt handling mach-sa1100: fix PCI build problem omap: timer: Set dmtimer used as clocksource in autoreload mode OMAP3: am3517crane: remove NULL board_mux from board file arm: mach-omap2: mux: use kstrdup() arch:arm:plat-omap:iovmm: remove unused variable 'va' Update Nook Color machine 3284 to common Encore name am3505/3517: Various platform defines for UART4 OMAP: hwmod: fix build break on non-OMAP4 multi-OMAP2 builds OMAP: Fix linking error in twl-common.c for OMAP2/3/4 only builds iMX: Fix build for iMX53 ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage OMAP2+: PM: SmartReflex: use put_sync_suspend for IRQ-safe disabling OMAP3: beagle: don't touch omap_device internals OMAP1: enable GENERIC_IRQ_CHIP ... 13 August 2011, 03:42:02 UTC
c59d87c Christoph Hellwig 12 August 2011, 21:21:35 UTC xfs: remove subdirectories Use the move from Linux 2.6 to Linux 3.x as an excuse to kill the annoying subdirectories in the XFS source code. Besides the large amount of file rename the only changes are to the Makefile, a few files including headers with the subdirectory prefix, and the binary sysctl compat code that includes a header under fs/xfs/ from kernel/. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com> 12 August 2011, 21:21:35 UTC
06f8e2d Alex Elder 12 August 2011, 18:57:55 UTC xfs: don't expect xfs headers to be in subdirectories Fix up some #include directives in preparation for moving a few header files out of xfs source subdirectories. Note that "xfs_linux.h" also got its quoting convention for included files switched. Signed-off-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> 12 August 2011, 18:57:55 UTC
e570280 Chandra Seetharaman 03 August 2011, 02:18:34 UTC xfs: replace xfs_buf_geterror() with bp->b_error Since we just checked bp for NULL, it is ok to replace xfs_buf_geterror() with bp->b_error in these places. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Alex Elder <aelder@sgi.com> 12 August 2011, 18:39:40 UTC
ac4d688 Chandra Seetharaman 03 August 2011, 02:18:29 UTC xfs: Check the return value of xfs_buf_read() for NULL Check the return value of xfs_buf_read() for NULL and return ENOMEM if it is NULL. This is necessary in a few spots to avoid subsequent code blindly dereferencing the null buffer pointer. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Alex Elder <aelder@sgi.com> 12 August 2011, 18:39:29 UTC
696314c Arnd Bergmann 12 August 2011, 18:37:43 UTC Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into fixes 12 August 2011, 18:37:43 UTC
c012cdc Takashi Iwai 12 August 2011, 16:26:38 UTC Merge branch 'fix/asoc' into for-linus 12 August 2011, 16:26:38 UTC
f6b864a Takashi Iwai 12 August 2011, 16:22:10 UTC ASoC: Fix compile warning in wm8750.c sound/soc/codecs/wm8750.c:784:2: warning: missing braces around initializer sound/soc/codecs/wm8750.c:784:2: warning: (near initialization for ‘wm8750_spi_ids[2].name’) It's because struct spi_device_id.name is a char array, not a pointer, while the driver initializes explicitly with 0. Signed-off-by: Takashi Iwai <tiwai@suse.de> 12 August 2011, 16:22:10 UTC
419bb4e Arnd Bergmann 12 August 2011, 15:49:38 UTC Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into fixes 12 August 2011, 15:49:38 UTC
143ed29 Arnd Bergmann 12 August 2011, 15:45:44 UTC Merge branch 'imx-fixes-for-arnd' of git://git.pengutronix.de/git/imx/linux-2.6 into fixes 12 August 2011, 15:45:44 UTC
ce8a84e Linus Torvalds 12 August 2011, 13:43:53 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) e1000e: increase driver version number e1000e: alternate MAC address update e1000e: do not disable receiver on 82574/82583 e1000e: alternate MAC address does not work on device id 0x1060 PCnet: Fix section mismatch bnx2x: disable dcb on 578xx since not supported yet bnx2x: properly clean indirect addresses bnx2x: prevent race between undi_unload and load flows bnx2x: fix select_queue when FCoE is disabled bnx2x: init FCOE FP only once ipv4: some rt_iif -> rt_route_iif conversions net/bridge/netfilter/ebtables.c: use available error handling code net/netlabel/netlabel_kapi.c: add missing cleanup code net/irda: sh_sir: tidyup compile warning net/irda: sh_sir: add missing header net/irda: sh_irda: add missing header slcan: ldisc generated skbs are received in softirq context scm: Capture the full credentials of the scm sender tcp: initialize variable ecn_ok in syncookies path drivers/net/wireless/wl1251: add missing kfree ... 12 August 2011, 13:43:53 UTC
a01e836 Stefan Richter 11 August 2011, 18:40:42 UTC firewire: ohci: fix DMA unmapping in an error path If request_irq failed, we would pass wrong arguments to dma_free_coherent. https://bugzilla.redhat.com/show_bug.cgi?id=728185 Reported-by: Mads Kiilerich Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> 12 August 2011, 13:30:08 UTC
9c1176b Stefan Richter 10 August 2011, 22:06:04 UTC firewire: cdev: fix 32 bit userland on 64 bit kernel compat corner cases Clemens points out that we need to use compat_ptr() in order to safely cast from u64 to addresses of a 32-bit usermode client. Before, our conversion went wrong - in practice if the client cast from pointer to integer such that sign-extension happened, (libraw1394 and libdc1394 at least were not doing that, IOW were not affected) or - in theory on s390 (which doesn't have FireWire though) and on the tile architecture, regardless of what the client does. The bug would usually be observed as the initial get_info ioctl failing with "Bad address" (EFAULT). Reported-by: Carl Karsten <carl@personnelware.com> Reported-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> 12 August 2011, 13:30:08 UTC
3f4460a Masami Hiramatsu 11 August 2011, 11:03:18 UTC perf probe: Filter out redundant inline-instances With gcc4.6, some instances of concrete inlined function looks redundant and broken, because it appears inside of a concrete instance and its call_file and call_line are same as the original abstruct's decl_file and decl_line respectively. e.g. [ d1aa] subprogram external (flag) Yes name (strp) "add_timer" decl_file (data1) 2 ;here is original decl_line (data2) 847 ;line and file prototyped (flag) Yes inline (data1) inlined (1) sibling (ref4) [ d1c6] ... [ 11d84] subprogram abstract_origin (ref4) [ d1aa] ; concrete instance low_pc (addr) .text+0x000000000000246f <add_timer> high_pc (addr) .text+0x000000000000248b <mod_timer_pending> frame_base (block1) [ 0] call_frame_cfa sibling (ref4) [ 11dd9] [ 11d9f] formal_parameter abstract_origin (ref4) [ d1b9] location (data4) location list [ 701b] [ 11da8] inlined_subroutine abstract_origin (ref4) [ d1aa] ; redundant instance low_pc (addr) .text+0x000000000000247e <add_timer+0xf> high_pc (addr) .text+0x0000000000002480 <add_timer+0x11> call_file (data1) 2 ; call line and file call_line (data2) 847 ; are same as above Those redundant instances leads unwilling results; e.g. find probe points inside of functions even if we specify a function entry as below; $ perf probe -V add_timer Available variables at add_timer @<add_timer+0> struct timer_list* timer @<add_timer+15> (No matched variables) So, this filters out those redundant instances based on call-site and decl-site information. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20110811110317.19900.59525.stgit@fedora15 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 12 August 2011, 12:34:35 UTC
db0d2c6 Masami Hiramatsu 11 August 2011, 11:03:11 UTC perf probe: Search concrete out-of-line instances gcc 4.6 generates a concrete out-of-line instance when there is a function which is implicitly inlined somewhere but also has its own instance. The concrete out-of-line instance means that it has an abstract origin of the function which is referred by not only inlined-subroutines but also a concrete subprogram. Since current dwarf_func_inline_instances() can find only instances of inlined-subroutines, this introduces new die_walk_instances() to find both of subprogram and inlined-subroutines. e.g. without this, Available variables at sched_group_rt_period @<cpu_rt_period_read_uint+9> struct task_group* tg perf probe failed to find actual subprogram instance of sched_group_rt_period(). With this, Available variables at sched_group_rt_period @<cpu_rt_period_read_uint+9> struct task_group* tg @<sched_group_rt_period+0> struct task_group* tg Now it found the sched_group_rt_period() itself. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20110811110311.19900.63997.stgit@fedora15 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 12 August 2011, 12:32:10 UTC
f182e3e Masami Hiramatsu 11 August 2011, 11:03:05 UTC perf probe: Avoid searching variables in intermediate scopes Fix variable searching logic to search one in inner than local scope or global(CU) scope. In the other words, skip searching in intermediate scopes. e.g., in the following code, int var1; void inline infunc(int i) { i++; <--- [A] } void func(void) { int var1, var2; infunc(var2); } At [A], "var1" should point the global variable "var1", however, if user mis-typed as "var2", variable search should be failed. However, current logic searches variable infunc() scope, global scope, and then func() scope. Thus, it can find "var2" variable in func() scope. This may not be what user expects. So, it would better not search outer scopes except outermost (compile unit) scope which contains only global variables, when it failed to find given variable in local scope. E.g. Without this: $ perf probe -V pre_schedule --externs > without.vars With this: $ perf probe -V pre_schedule --externs > with.vars Check the diff: $ diff without.vars with.vars 88d87 < int cpu 133d131 < long unsigned int* switch_count These vars are actually in the scope of schedule(), the caller of pre_schedule(). Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20110811110305.19900.94374.stgit@fedora15 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 12 August 2011, 12:29:34 UTC
221d061 Masami Hiramatsu 11 August 2011, 11:02:59 UTC perf probe: Fix to search local variables in appropriate scope Fix perf probe to search local variables in appropriate local inlined function scope. For example, pre_schedule() has only 2 local variables, as below; $ perf probe -L pre_schedule <pre_schedule@/home/mhiramat/ksrc/linux-2.6/kernel/sched.c:0> 0 static inline void pre_schedule(struct rq *rq, struct task_struct *prev) { 2 if (prev->sched_class->pre_schedule) 3 prev->sched_class->pre_schedule(rq, prev); } However, current perf probe shows 4 local variables on pre_schedule(), because it searches variables in the caller(schedule()) scope. $ perf probe -V pre_schedule Available variables at pre_schedule @<schedule+445> int cpu long unsigned int* switch_count struct rq* rq struct task_struct* prev This patch fixes this issue by searching variables in the local scope of the instance of inlined function. Here is the result. $ perf probe -V pre_schedule Available variables at pre_schedule @<schedule+445> struct rq* rq struct task_struct* prev Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20110811110259.19900.85664.stgit@fedora15 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 12 August 2011, 12:28:45 UTC
13e27d7 Masami Hiramatsu 11 August 2011, 11:02:53 UTC perf probe: Warn when more than one line are given Check multiple --lines option and print warning informing that only the first specified --line option is valid. Changes from the 1st post: - Accept only the first option instead of the last. - Fix warning message according to David's comment. - Mark as a bugfix. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20110811110253.19900.96192.stgit@fedora15 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 12 August 2011, 12:27:11 UTC
36c0c58 Masami Hiramatsu 11 August 2011, 11:02:47 UTC perf probe: Fix to walk all inline instances Fix line-range collector to walk all instances of inlined function, because some execution paths can be optimized out depending on the function argument of instances. E.g.) inline_func (arg) { if (arg) do_something; else do_another; } func_A() { inline_func(1) } func_B() { inline_func(0) } In this case, func_A may have only do_something code and func_B may have only do_another. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20110811110247.19900.93702.stgit@fedora15 Signed-off-by: Masami Hiramatsu <masami.hiramatsu@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 12 August 2011, 12:25:38 UTC
b0e9cb2 Masami Hiramatsu 11 August 2011, 11:02:41 UTC perf probe: Fix to search nested inlined functions in CU Fix perf probe to walk through the lines of all nested inlined function call sites and declared lines when a whole CU is passed to the line walker. The die_walk_lines() can have two different type of DIEs, subprogram (or inlined-subroutine) DIE and CU DIE. If a caller passes a subprogram DIE, this means that the walker walk on lines of given subprogram. In this case, it just needs to search on direct children of DIE tree for finding call-site information of inlined function which directly called from given subprogram. On the other hand, if a caller passes a CU DIE to the walker, this means that the walker have to walk on all lines in the source files included in given CU DIE. In this case, it has to search whole DIE trees of all subprograms to find the call-site information of all nested inlined functions. Without this patch: $ perf probe --line kernel/cpu.c:151-157 </home/mhiramat/ksrc/linux-2.6/kernel/cpu.c:151> static int cpu_notify(unsigned long val, void *v) { 154 return __cpu_notify(val, v, -1, NULL); } With this: $ perf probe --line kernel/cpu.c:151-157 </home/mhiramat/ksrc/linux-2.6/kernel/cpu.c:151> 152 static int cpu_notify(unsigned long val, void *v) { 154 return __cpu_notify(val, v, -1, NULL); } As you can see, --line option with source line range shows the declared lines as probe-able. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20110811110241.19900.34994.stgit@fedora15 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 12 August 2011, 12:23:39 UTC
a128405 Masami Hiramatsu 11 August 2011, 11:02:35 UTC perf probe: Fix line walker to check CU correctly Fix line walker to check whether a given DIE is CU or not. Actually this function accepts CU, subprogram and inlined_subroutine DIEs. Without this fix, perf probe always fails to analyze lines on inlined functions; $ perf probe -L pre_schedule Debuginfo analysis failed. (-2) Error: Failed to show lines. (-2) This fixes that bug, as below. $ perf probe -L pre_schedule <pre_schedule@/home/mhiramat/ksrc/linux-2.6/kernel/sched.c:0> 0 static inline void pre_schedule(struct rq *rq, struct task_struct *prev { 2 if (prev->sched_class->pre_schedule) 3 prev->sched_class->pre_schedule(rq, prev); } /* rq->lock is NOT held, but preemption is disabled */ Changes from v1: - Update against current tip tree.(Fix dwarf-aux.c) Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20110811110235.19900.20614.stgit@fedora15 Signed-off-by: Masami Hiramatsu <masami.hiramatsu@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 12 August 2011, 12:22:46 UTC
8afa2a7 Masami Hiramatsu 11 August 2011, 11:02:29 UTC perf probe: Fix a memory leak for scopes array Fix a memory leak for scopes array when it finds a variable in the global scope. Reviewed-by: Pekka Enberg <penberg@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20110811110229.19900.63019.stgit@fedora15 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 12 August 2011, 12:21:15 UTC
e9b52ef Vasiliy Kulikov 11 August 2011, 20:55:37 UTC perf: fix temporary file ownership check A file in /tmp/ might be a symlink, so lstat() should be used instead of stat(). Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20110811205537.GA22864@albatros Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 12 August 2011, 11:28:17 UTC
bcc65fd Matthew Garrett 08 August 2011, 16:21:16 UTC drm/radeon: re-POST the asic on Apple hardware when booted via EFI At least some Apples program the GPU into a state that wedges the engine once userspace starts trying to perform accelerated operations. Executing the Atom init scripts gets the hardware back into a working state. The same hardware works fine when booted via BIOS emulation, so let's just execute the init scripts on Apples when we're using EFI. Signed-off-by: Matthew Garrett <mjg@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 12 August 2011, 10:04:29 UTC
13bb943 Matthew Garrett 08 August 2011, 16:21:15 UTC drm/radeon: Allow panel preferred EDID to override BIOS native mode We have two sources of information about panel capabilities on mobile radeon - the BIOS, which gives us a native mode, and the panel's preferred mode. In theory these two will always match, but there's some corner cases where the BIOS hasn't been fully initialised and so the native mode in it ends up with default values. However, if we get a panel with reasonable EDID, it's probably the case that the panel's preferred mode does actually represent the panel capabilities. This patch handles that case by replacing the native mode with the panel's preferred mode if the resolutions don't match. Systems without a valid internal panel EDID will still use the BIOS native mode. Signed-off-by: Matthew Garrett <mjg@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 12 August 2011, 10:02:46 UTC
92bdfd4 Alex Deucher 04 August 2011, 17:28:40 UTC drm/radeon/kms: make some watermark messages debug only Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 12 August 2011, 09:49:43 UTC
33ae182 Alex Deucher 11 August 2011, 14:01:03 UTC drm/radeon/kms: fix regression is handling >2 heads on cedar/caicos Need to add support for 4 crtcs when setting the possible crtcs for the encoders. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 12 August 2011, 09:48:08 UTC
back to top