Skip to main content

Browse the archive

swh:1:snp:c3bf2749e3476071fa748f67b0ffa2fdc5fe49d9
sort by:
Revision Author Date Message Commit Date
d48b97b Linus Torvalds 06 May 2012, 22:07:32 UTC Linux 3.4-rc6 06 May 2012, 22:07:32 UTC
18b15fc Linus Torvalds 06 May 2012, 19:19:38 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes form Peter Anvin * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver x86, relocs: Remove an unused variable asm-generic: Use __BITS_PER_LONG in statfs.h x86/amd: Re-enable CPU topology extensions in case BIOS has disabled it 06 May 2012, 19:19:38 UTC
271fd5d Linus Torvalds 06 May 2012, 17:20:07 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "The big ones here are a memory leak we introduced in rc1, and a scheduling while atomic if the transid on disk doesn't match the transid we expected. This happens for corrupt blocks, or out of date disks. It also fixes up the ioctl definition for our ioctl to resolve logical inode numbers. The __u32 was a merging error and doesn't match what we ship in the progs." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: avoid sleeping in verify_parent_transid while atomic Btrfs: fix crash in scrub repair code when device is missing btrfs: Fix mismatching struct members in ioctl.h Btrfs: fix page leak when allocing extent buffers Btrfs: Add properly locking around add_root_to_dirty_list 06 May 2012, 17:20:07 UTC
ce7e5d2 Al Viro 06 May 2012, 16:20:00 UTC x86: fix broken TASK_SIZE for ia32_aout Setting TIF_IA32 in load_aout_binary() used to be enough; these days TASK_SIZE is controlled by TIF_ADDR32 and that one doesn't get set there. Switch to use of set_personality_ia32()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 May 2012, 17:15:18 UTC
b9fab91 Chris Mason 06 May 2012, 11:23:47 UTC Btrfs: avoid sleeping in verify_parent_transid while atomic verify_parent_transid needs to lock the extent range to make sure no IO is underway, and so it can safely clear the uptodate bits if our checks fail. But, a few callers are using it with spinlocks held. Most of the time, the generation numbers are going to match, and we don't want to switch to a blocking lock just for the error case. This adds an atomic flag to verify_parent_transid, and changes it to return EAGAIN if it needs to block to properly verifiy things. Signed-off-by: Chris Mason <chris.mason@oracle.com> 06 May 2012, 11:23:47 UTC
03cb00b Linus Torvalds 05 May 2012, 23:34:38 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha Pull alpha fixes from Matt Turner: "My alpha tree is back up (after taking quite some time to get my GPG key signed). It contains just some simple fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: silence 'const' warning in sys_marvel.c alpha: include module.h to fix modpost on Tsunami alpha: properly define get/set_rtc_time on Marvel/SMP alpha: VGA_HOSE depends on VGA_CONSOLE 05 May 2012, 23:34:38 UTC
49a5f3c Jiri Slaby 05 May 2012, 20:49:10 UTC TTY: pdc_cons, fix regression in close The test in pdc_console_tty_close '!tty->count' was always wrong because tty->count is decremented after tty->ops->close is called and thus can never be zero. Hence the 'then' branch was never executed and the timer never deleted. This did not matter until commit 5dd5bc40f3b6 ("TTY: pdc_cons, use tty_port"). There we needed to set TTY in tty_port to NULL, but this never happened due to the bug above. So change the test to really trigger at the last close by changing the condition to 'tty->count == 1'. Well, the driver should not touch tty->count at all. It should use tty_port->count and count open count there itself. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-and-tested-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 May 2012, 23:21:21 UTC
1c2f954 Linus Torvalds 05 May 2012, 17:07:06 UTC Merge tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound sound fixes from Takashi Iwai: "As good as nothing exciting here; just a few trivial fixes for various ASoC stuff." * tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: omap-pcm: Free dma buffers in case of error. ASoC: s3c2412-i2s: Fix dai registration ASoC: wm8350: Don't use locally allocated codec struct ASoC: tlv312aic23: unbreak resume ASoC: bf5xx-ssm2602: Set DAI format ASoC: core: check of_property_count_strings failure ASoC: dt: sgtl5000.txt: Add description for 'reg' field ASoC: wm_hubs: Make sure we don't disable differential line outputs 05 May 2012, 17:07:06 UTC
59068e3 Linus Torvalds 05 May 2012, 17:06:06 UTC Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull an ACPI patch from Len Brown: "It fixes a D3 issue new in 3.4-rc1." By Lin Ming via Len Brown: * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: ACPI: Fix D3hot v D3cold confusion 05 May 2012, 17:06:06 UTC
377485f Sasha Levin 05 May 2012, 15:06:35 UTC init: don't try mounting device as nfs root unless type fully matches Currently, we'll try mounting any device who's major device number is UNNAMED_MAJOR as NFS root. This would happen for non-NFS devices as well (such as 9p devices) but it wouldn't cause any issues since mounting the device as NFS would fail quickly and the code proceeded to doing the proper mount: [ 101.522716] VFS: Unable to mount root fs via NFS, trying floppy. [ 101.534499] VFS: Mounted root (9p filesystem) on device 0:18. Commit 6829a048102a ("NFS: Retry mounting NFSROOT") introduced retries when mounting NFS root, which means that now we don't immediately fail and instead it takes an additional 90+ seconds until we stop retrying, which has revealed the issue this patch fixes. This meant that it would take an additional 90 seconds to boot when we're not using a device type which gets detected in order before NFS. This patch modifies the NFS type check to require device type to be 'Root_NFS' instead of requiring the device to have an UNNAMED_MAJOR major. This makes boot process cleaner since we now won't go through the NFS mounting code at all when the device isn't an NFS root ("/dev/nfs"). Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 May 2012, 17:04:40 UTC
e9e7183 Takashi Iwai 05 May 2012, 09:27:26 UTC Merge branch 'fix/asoc' into for-linus 05 May 2012, 09:27:26 UTC
b339583 Takashi Iwai 05 May 2012, 09:26:50 UTC Merge branch 'for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc into fix/asoc 05 May 2012, 09:26:50 UTC
20c7694 Takashi Iwai 05 May 2012, 09:25:17 UTC Merge tag 'asoc-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for 3.4 Nothing terribly exciting here, a bunch of small and simple fixes scattered around the place. 05 May 2012, 09:25:17 UTC
1cc0c99 Lin Ming 23 April 2012, 01:03:49 UTC ACPI: Fix D3hot v D3cold confusion Before this patch, ACPI_STATE_D3 incorrectly referenced D3hot in some places, but D3cold in other places. After this patch, ACPI_STATE_D3 always means ACPI_STATE_D3_COLD; and all references to D3hot use ACPI_STATE_D3_HOT. ACPI's _PR3 method is used to enter both D3hot and D3cold states. What distinguishes D3hot from D3cold is the presence _PR3 (Power Resources for D3hot) If these resources are all ON, then the state is D3hot. If _PR3 is not present, or all _PR0 resources for the devices are OFF, then the state is D3cold. This patch applies after Linux-3.4-rc1. A future syntax cleanup may remove ACPI_STATE_D3 to emphasize that it always means ACPI_STATE_D3_COLD. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Len Brown <len.brown@intel.com> 05 May 2012, 05:19:52 UTC
6f24f89 Greg Kroah-Hartman 04 May 2012, 19:09:39 UTC hfsplus: Fix potential buffer overflows Commit ec81aecb2966 ("hfs: fix a potential buffer overflow") fixed a few potential buffer overflows in the hfs filesystem. But as Timo Warns pointed out, these changes also need to be made on the hfsplus filesystem as well. Reported-by: Timo Warns <warns@pre-sense.de> Acked-by: WANG Cong <amwang@redhat.com> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Sage Weil <sage@newdream.net> Cc: Eugene Teo <eteo@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dave Anderson <anderson@redhat.com> Cc: stable <stable@vger.kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 May 2012, 00:11:24 UTC
f756beb Linus Torvalds 04 May 2012, 22:35:09 UTC Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner. * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rtc: Fix possible null pointer dereference in rtc-mpc5121.c 04 May 2012, 22:35:09 UTC
c6de168 Linus Torvalds 04 May 2012, 22:34:21 UTC Merge git://git.samba.org/sfrench/cifs-2.6 Pull CIFS fixes from Steve French. * git://git.samba.org/sfrench/cifs-2.6: fs/cifs: fix parsing of dfs referrals cifs: make sure we ignore the credentials= and cred= options [CIFS] Update cifs version to 1.78 cifs - check S_AUTOMOUNT in revalidate cifs: add missing initialization of server->req_lock cifs: don't cap ra_pages at the same level as default_backing_dev_info CIFS: Fix indentation in cifs_show_options 04 May 2012, 22:34:21 UTC
a03a09b Dave Jones 04 May 2012, 16:04:17 UTC CPU frequency drivers MAINTAINERS update Remove myself as cpufreq maintainer. x86 driver changes can go through the regular x86/ACPI trees. ARM driver changes through the ARM trees. cpufreq core changes are rare these days, and can just go to lkml/direct. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 May 2012, 22:33:45 UTC
4f988f1 Linus Torvalds 04 May 2012, 22:13:54 UTC seqlock: add 'raw_seqcount_begin()' function The normal read_seqcount_begin() function will wait for any current writers to exit their critical region by looping until the sequence count is even. That "wait for sequence count to stabilize" is the right thing to do if the read-locker will just retry the whole operation on contention: no point in doing a potentially expensive reader sequence if we know at the beginning that we'll just end up re-doing it all. HOWEVER. Some users don't actually retry the operation, but instead will abort and do the operation with proper locking. So the sequence count case may be the optimistic quick case, but in the presense of writers you may want to do full locking in order to guarantee forward progress. The prime example of this would be the RCU name lookup. And in that case, you may well be better off without the "retry early", and are in a rush to instead get to the failure handling. Thus this "raw" interface that just returns the sequence number without testing it - it just forces the low bit to zero so that read_seqcount_retry() will always fail such a "active concurrent writer" scenario. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 May 2012, 22:13:54 UTC
2f62427 Linus Torvalds 04 May 2012, 21:46:02 UTC Fix __read_seqcount_begin() to use ACCESS_ONCE for sequence value read We really need to use a ACCESS_ONCE() on the sequence value read in __read_seqcount_begin(), because otherwise the compiler might end up reloading the value in between the test and the return of it. As a result, it might end up returning an odd value (which means that a write is in progress). If the reader is then fast enough that that odd value is still the current one when the read_seqcount_retry() is done, we might end up with a "successful" read sequence, even despite the concurrent write being active. In practice this probably never really happens - there just isn't anything else going on around the read of the sequence count, and the common case is that we end up having a read barrier immediately afterwards. So the code sequence in which gcc might decide to reaload from memory is small, and there's no reason to believe it would ever actually do the reload. But if the compiler ever were to decide to do so, it would be incredibly annoying to debug. Let's just make sure. Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 May 2012, 21:46:02 UTC
ab27a20 Yong Wang 04 May 2012, 21:02:44 UTC intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND So that the power button still wakes up the platform. Signed-off-by: Pierre Tardy <pierre.tardy@intel.com> Link: http://lkml.kernel.org/r/20120504210244.F2EA5A018B@akpm.mtv.corp.google.com Tested-by: Kangkai Yin <kangkai.yin@intel.com> Tested-by: Yong Wang <yong.y.wang@intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> 04 May 2012, 21:40:52 UTC
d1d0589 Bjarke Istrup Pedersen 04 May 2012, 21:01:45 UTC arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver It seems that there was an error with the active_low = 1 for the LED, since it should be set to 0 (meaning that active is high, since 0 is false, hence the confusion. The wiki article about it confuses it, since it contradicts itself, regarding what turns on the LED. I have tested 3.4-rc2 on my net5501 with this patch, and it makes the LED behave correctly, where "none" turns it off, and "default-on" turns it on, when echoed onto the trigger "file" in /sys/class/leds. Signed-off-by: Bjarke Istrup Pedersen <gurligebis@gentoo.org> Link: http://lkml.kernel.org/r/20120504210146.62186A018B@akpm.mtv.corp.google.com Cc: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> 04 May 2012, 21:40:07 UTC
ea9947b Stefan Behrens 04 May 2012, 19:16:07 UTC Btrfs: fix crash in scrub repair code when device is missing Fix that when scrub tries to repair an I/O or checksum error and one of the devices containing the mirror is missing, it crashes in bio_add_page because the bdev is a NULL pointer for missing devices. Reported-by: Marco L. Crociani <marco.crociani@gmail.com> Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com> 04 May 2012, 19:16:07 UTC
d04b1de Alexander Block 04 May 2012, 19:16:06 UTC btrfs: Fix mismatching struct members in ioctl.h Fix the size members of btrfs_ioctl_ino_path_args and btrfs_ioctl_logical_ino_args. The user space btrfs-progs utilities used __u64 and the kernel headers used __u32 before. Signed-off-by: Alexander Block <ablock84@googlemail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 04 May 2012, 19:16:06 UTC
17de39a Josef Bacik 04 May 2012, 19:16:06 UTC Btrfs: fix page leak when allocing extent buffers If we happen to alloc a extent buffer and then alloc a page and notice that page is already attached to an extent buffer, we will only unlock it and free our existing eb. Any pages currently attached to that eb will be properly freed, but we don't do the page_cache_release() on the page where we noticed the other extent buffer which can cause us to leak pages and I hope cause the weird issues we've been seeing in this area. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 04 May 2012, 19:16:06 UTC
e5846fc Chris Mason 03 May 2012, 16:08:48 UTC Btrfs: Add properly locking around add_root_to_dirty_list add_root_to_dirty_list happens once at the very beginning of the transaction, but it is still racey. Signed-off-by: Chris Mason <chris.mason@oracle.com> 04 May 2012, 19:14:11 UTC
f0f376f Linus Torvalds 04 May 2012, 14:57:13 UTC Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Some minor fixes from Intel and a radeon fix. I have the nouveau fix for the i2c regression queued for next week, its mostly a revert and seems to work on the system it was originally introduced for thanks to some i2c core changes." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: clarify and extend wb setup on APUs and NI+ asics drm/i915: enable dip before writing data on gen4 fixing dmi match for hp t5745 and hp st5747 thin client drm/i915: Only enable IPS polling for gen5 drm/i915: Do not read non-existent DPLL registers on PCH hardware 04 May 2012, 14:57:13 UTC
0854224 Linus Torvalds 04 May 2012, 14:56:22 UTC Merge tag 'md-3.4-fixes' of git://neil.brown.name/md Pull one small fix for md/bitmaps from NeilBrown: "This fixes a regression that was introduced in the merge window." * tag 'md-3.4-fixes' of git://neil.brown.name/md: md/bitmap: fix calculation of 'chunks' - missing shift. 04 May 2012, 14:56:22 UTC
f462204 Linus Torvalds 04 May 2012, 14:50:50 UTC Merge branch 'fix-unmapped-word-at-a-time' Jana Saout confirmed that this fixes the page faults he saw. His problem was triggered by ocfs2 and autofs symlink lookups, where the symlink allocation was at the end of a page. But the deeper reason seems to be the use of Xen-PV, which is what then causes him to have all these unmapped pages, which is what then makes it a problem when the unaligned word-at-a-time code fetches data past the end of a page. * fix-unmapped-word-at-a-time: vfs: make word-at-a-time accesses handle a non-existing page 04 May 2012, 14:50:50 UTC
fad9365 Oleg Matcovschi 25 April 2012, 02:02:02 UTC ASoC: omap-pcm: Free dma buffers in case of error. Signed-off-by: Oleg Matcovschi <oleg.matcovschi@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com> 04 May 2012, 11:09:28 UTC
c994ead Alex Deucher 03 May 2012, 21:06:28 UTC drm/radeon: clarify and extend wb setup on APUs and NI+ asics Use family rather than DCE check for clarity, also always use wb on APUs, there will never be AGP variants. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 04 May 2012, 08:36:11 UTC
b16b1b6 NeilBrown 04 May 2012, 07:03:18 UTC md/bitmap: fix calculation of 'chunks' - missing shift. commit 61a0d80c "md/bitmap: discard CHUNK_BLOCK_SHIFT macro" replaced CHUNK_BLOCK_RATIO() by the same text that was replacing CHUNK_BLOCK_SHIFT() - which is clearly wrong. The result is that 'chunks' is often too small by 1, which can sometimes result in a crash (not sure how). So use the correct replacement, and get rid of CHUNK_BLOCK_RATIO which is no longe used. Reported-by: Karl Newman <siliconfiend@gmail.com> Tested-by: Karl Newman <siliconfiend@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> 04 May 2012, 07:03:18 UTC
d8f2799 Stefan Metzmacher 03 May 2012, 22:19:28 UTC fs/cifs: fix parsing of dfs referrals The problem was that the first referral was parsed more than once and so the caller tried the same referrals multiple times. The problem was introduced partly by commit 066ce6899484d9026acd6ba3a8dbbedb33d7ae1b, where 'ref += le16_to_cpu(ref->Size);' got lost, but that was also wrong... Cc: <stable@vger.kernel.org> Signed-off-by: Stefan Metzmacher <metze@samba.org> Tested-by: Björn Jacke <bj@sernet.de> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> 04 May 2012, 03:47:39 UTC
0a6ba09 Linus Torvalds 04 May 2012, 00:21:05 UTC Merge tag 'mfd-for-linus-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull second set of MFD fixes from Samuel Ortiz: "This time we only have a one liner fixing an omap-usb build error." * tag 'mfd-for-linus-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Fix build breakage in omap-usb-host.c 04 May 2012, 00:21:05 UTC
65e62b5 Linus Torvalds 04 May 2012, 00:19:48 UTC Merge branch 'efi-vars' from Matthew Garrett * efi-vars: efivars: Improve variable validation 04 May 2012, 00:19:48 UTC
54b3a4d Matthew Garrett 03 May 2012, 20:50:46 UTC efivars: Improve variable validation Ben Hutchings pointed out that the validation in efivars was inadequate - most obviously, an entry with size 0 would server as a DoS against the kernel. Improve this based on his suggestions. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 May 2012, 00:19:19 UTC
6b4c555 Linus Torvalds 04 May 2012, 00:16:52 UTC Merge tag 'tag/upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull libata fixes from Jeff Garzik: 1) Fix regression that could cause a misdiagnosis, which in turn could lead to an erroneous 3.0 Gbps -> 1.5 downshift, particularly when hotplug and suspend/resume is involved. 2) Fix a regression that led to ata%d controller ids being numbered one larger than in <= 3.4-rc3 (oh, the horror!). Controller ids should now be as expected. 3) add some DT, PCI id's 4) ata/pata_arasan_cf: minor cpp fixing/cleaning * tag 'tag/upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata: ahci_platform: Add synopsys ahci controller in DT's compatible list ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros libata: init ata_print_id to 0 ahci: Detect Marvell 88SE9172 SATA controller libata: skip old error history when counting probe trials 04 May 2012, 00:16:52 UTC
4e78f00 Linus Torvalds 04 May 2012, 00:15:47 UTC Merge branch 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux Pull i2c embedded fixes from Wolfram Sang: "Here are some typical i2c driver bugfixes for 3.4. Missed clock handling, improper timeout fixes, hardware wrokarounds... All patches have been in linux-next for a few days, too." * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c: mxs: disable QUEUE when sending is done i2c: mxs: handle spurious interrupt i2c-eg20t: Modify MODULE_AUTHOR's email address i2c-eg20t: change timeout value 50msec to 1000msec i2c: tegra: Add delay before resetting the controller after NACK i2c: pnx: Disable clk in suspend 04 May 2012, 00:15:47 UTC
f5645b5 Linus Torvalds 04 May 2012, 00:14:55 UTC Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Just some regression fixes from Ben along with a variable that gcc failed to spot is uninitialised." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: nouveau: initialise has_optimus variable. drm/nv10/gpio: fix thinko in mask for gpio lines 2-9 nvc0/fb: shut up PMFB interrupt after the first occurrence drm/nouveau/hdmi: use correct hdmi regs for nvaa/nvac drm/nouveau/bios: fix regression on some nv4x board 04 May 2012, 00:14:55 UTC
c42f1d4 Linus Torvalds 04 May 2012, 00:10:39 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Transfer padding was wrong for full-speed USB in ASIX driver, fix from Ingo van Lil. 2) Propagate the negative packet offset fix into the PowerPC BPF JIT. From Jan Seiffert. 3) dl2k driver's private ioctls were letting unprivileged tasks make MII writes and other ugly bits like that. Fix from Jeff Mahoney. 4) Fix TX VLAN and RX packet drops in ucc_geth, from Joakim Tjernlund. 5) OOPS and network namespace fixes in IPVS from Hans Schillstrom and Julian Anastasov. 6) Fix races and sleeping in locked context bugs in drop_monitor, from Neil Horman. 7) Fix link status indication in smsc95xx driver, from Paolo Pisati. 8) Fix bridge netfilter OOPS, from Peter Huang. 9) L2TP sendmsg can return on error conditions with the socket lock held, oops. Fix from Sasha Levin. 10) udp_diag should return meaningful values for socket memory usage, from Shan Wei. 11) Eric Dumazet is so awesome he gets his own section: Socket memory cgroup code (I never should have applied those patches, grumble...) made erroneous changes to sk_sockets_allocated_read_positive(). It was changed to use percpu_counter_sum_positive (which requires BH disabling) instead of percpu_counter_read_positive (which does not). Revert back to avoid crashes and lockdep warnings. Adjust the default tcp_adv_win_scale and tcp_rmem[2] values to fix throughput regressions. This is necessary as a result of our more precise skb->truesize tracking. Fix SKB leak in netem packet scheduler. 12) New device IDs for various bluetooth devices, from Manoj Iyer, AceLan Kao, and Steven Harms. 13) Fix command completion race in ipw2200, from Stanislav Yakovlev. 14) Fix rtlwifi oops on unload, from Larry Finger. 15) Fix hard_mtu when adjusting hard_header_len in smsc95xx driver. From Stephane Fillod. 16) ehea driver registers it's IRQ before all the necessary state is setup, resulting in crashes. Fix from Thadeu Lima de Souza Cascardo. 17) Fix PHY connection failures in davinci_emac driver, from Anatolij Gustschin. 18) Missing break; in switch statement in bluetooth's hci_cmd_complete_evt(). Fix from Szymon Janc. 19) Fix queue programming in iwlwifi, from Johannes Berg. 20) Interrupt throttling defaults not being actually programmed into the hardware, fix from Jeff Kirsher and Ying Cai. 21) TLAN driver SKB encoding in descriptor busted on 64-bit, fix from Benjamin Poirier. 22) Fix blind status block RX producer pointer deref in TG3 driver, from Matt Carlson. 23) Promisc and multicast are busted on ehea, fixes from Thadeu Lima de Souza Cascardo. 24) Fix crashes in 6lowpan, from Alexander Smirnov. 25) tcp_complete_cwr() needs to be careful to not rewind the CWND to ssthresh if ssthresh has the "infinite" value. Fix from Yuchung Cheng. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) sungem: Fix WakeOnLan tcp: change tcp_adv_win_scale and tcp_rmem[2] net: l2tp: unlock socket lock before returning from l2tp_ip_sendmsg drop_monitor: prevent init path from scheduling on the wrong cpu usbnet: fix failure handling in usbnet_probe usbnet: fix leak of transfer buffer of dev->interrupt ucc_geth: Add 16 bytes to max TX frame for VLANs net: ucc_geth, increase no. of HW RX descriptors netem: fix possible skb leak sky2: fix receive length error in mixed non-VLAN/VLAN traffic sky2: propogate rx hash when packet is copied net: fix two typos in skbuff.h cxgb3: Don't call cxgb_vlan_mode until q locks are initialized ixgbe: fix calling skb_put on nonlinear skb assertion bug ixgbe: Fix a memory leak in IEEE DCB igbvf: fix the bug when initializing the igbvf smsc75xx: enable mac to detect speed/duplex from phy smsc75xx: declare smsc75xx's MII as GMII capable smsc75xx: fix phy interrupt acknowledge smsc75xx: fix phy init reset loop ... 04 May 2012, 00:10:39 UTC
913a904 Linus Torvalds 04 May 2012, 00:08:58 UTC Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix OOPS seen in coretemp driver if the CPU core ID is too large" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (coretemp) Increase CPU core limit hwmon: (coretemp) fix oops on cpu unplug 04 May 2012, 00:08:58 UTC
e419b4c Linus Torvalds 03 May 2012, 17:16:43 UTC vfs: make word-at-a-time accesses handle a non-existing page It turns out that there are more cases than CONFIG_DEBUG_PAGEALLOC that can have holes in the kernel address space: it seems to happen easily with Xen, and it looks like the AMD gart64 code will also punch holes dynamically. Actually hitting that case is still very unlikely, so just do the access, and take an exception and fix it up for the very unlikely case of it being a page-crosser with no next page. And hey, this abstraction might even help other architectures that have other issues with unaligned word accesses than the possible missing next page. IOW, this could do the byte order magic too. Peter Anvin fixed a thinko in the shifting for the exception case. Reported-and-tested-by: Jana Saout <jana@saout.de> Cc: Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 May 2012, 21:01:40 UTC
a557b97 Jeff Layton 02 May 2012, 18:02:40 UTC cifs: make sure we ignore the credentials= and cred= options Older mount.cifs programs passed this on to the kernel after parsing the file. Make sure the kernel ignores that option. Should fix: https://bugzilla.kernel.org/show_bug.cgi?id=43195 Cc: Sachin Prabhu <sprabhu@redhat.com> Reported-by: Ronald <ronald645@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> 03 May 2012, 18:50:01 UTC
f966424 Steve French 02 May 2012, 16:58:19 UTC [CIFS] Update cifs version to 1.78 Signed-off-by: Steve French <sfrench@us.ibm.com> 03 May 2012, 18:50:01 UTC
936ad90 Ian Kent 02 May 2012, 11:19:09 UTC cifs - check S_AUTOMOUNT in revalidate When revalidating a dentry, if the inode wasn't known to be a dfs entry when the dentry was instantiated, such as when created via ->readdir(), the DCACHE_NEED_AUTOMOUNT flag needs to be set on the dentry in ->d_revalidate(). The false return from cifs_d_revalidate(), due to the inode now being marked with the S_AUTOMOUNT flag, might not invalidate the dentry if there is a concurrent unlazy path walk. This is because the dentry reference count will be at least 2 in this case causing d_invalidate() to return EBUSY. So the asumption that the dentry will be discarded then correctly instantiated via ->lookup() might not hold. Signed-off-by: Ian Kent <raven@themaw.net> Reviewed-by: Jeff Layton <jlayton@redhat.com> Cc: Steve French <smfrench@gmail.com> Cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <sfrench@us.ibm.com> 03 May 2012, 18:49:47 UTC
5f098a3 Viresh Kumar 21 April 2012, 12:10:12 UTC ata: ahci_platform: Add synopsys ahci controller in DT's compatible list SPEAr13xx series of SoCs contain Synopsys AHCI SATA Controller which shares ahci_platform driver with other controller versions. This patch updates DT compatible list for ahci_platform. It also updates and renames binding documentation to more generic name. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 03 May 2012, 18:08:53 UTC
fb9751d Viresh Kumar 21 April 2012, 12:10:09 UTC ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros #ifdef, #endif is not required in definition/usage of arasan_cf_pm_ops. So, move this definition and its usage outside of them. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 03 May 2012, 18:08:03 UTC
a78f57a Tero Roponen 22 April 2012, 08:38:00 UTC libata: init ata_print_id to 0 When comparing the dmesg between 3.4-rc3 and 3.4-rc4 I found the following differences: -ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47 -ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47 -ata3: DUMMY +ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47 +ata3: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47 ata4: DUMMY ata5: DUMMY -ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47 +ata6: DUMMY +ata7: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47 The change of numbering comes from commit 85d6725b7c0d7e3f ("libata: make ata_print_id atomic") that changed lines like ap->print_id = ata_print_id++; to ap->print_id = atomic_inc_return(&ata_print_id); As the latter behaves like ++ata_print_id, we must initialize it to zero to start the numbering from one. Signed-off-by: Tero Roponen <tero.roponen@gmail.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 03 May 2012, 18:07:59 UTC
642d892 Matt Johnson 27 April 2012, 06:42:30 UTC ahci: Detect Marvell 88SE9172 SATA controller The Marvell 88SE9172 SATA controller (PCI ID 1b4b 917a) already worked once it was detected, but was missing an ahci_pci_tbl entry. Boot tested on a Gigabyte Z68X-UD3H-B3 motherboard. Signed-off-by: Matt Johnson <johnso87@illinois.edu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 03 May 2012, 18:07:40 UTC
6868225 Lin Ming 03 May 2012, 14:15:07 UTC libata: skip old error history when counting probe trials Commit d902747("[libata] Add ATA transport class") introduced ATA_EFLAG_OLD_ER to mark entries in the error ring as cleared. But ata_count_probe_trials_cb() didn't check this flag and it still counts the old error history. So wrong probe trials count is returned and it causes problem, for example, SATA link speed is slowed down from 3.0Gbps to 1.5Gbps. Fix it by checking ATA_EFLAG_OLD_ER in ata_count_probe_trials_cb(). Cc: stable <stable@vger.kernel.org> # 2.6.37+ Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 03 May 2012, 18:05:58 UTC
b6bb962 Dave Airlie 03 May 2012, 16:27:02 UTC Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: enable dip before writing data on gen4 fixing dmi match for hp t5745 and hp st5747 thin client drm/i915: Only enable IPS polling for gen5 drm/i915: Do not read non-existent DPLL registers on PCH hardware 03 May 2012, 16:27:02 UTC
c1230df Paulo Zanoni 03 May 2012, 01:55:43 UTC drm/i915: enable dip before writing data on gen4 While testing with the intel_infoframes tool on gen4, I see that when video DIP is disabled, what we write to the DATA memory is not exactly what we read back later. This regression has been introduce in commit 64a8fc0145a1d0fdc25fc9367c2e6c621955fb3b Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Thu Sep 22 11:16:00 2011 +0530 drm/i915: fix ILK+ infoframe support That commit was setting VIDEO_DIP_CTL to 0 when initializing, which caused the problem. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43947 Cc: stable@kernel.org Tested-by: Yang Guang <guang.a.yang@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> [danvet: Pimped commit message by using the usual commit citation layout.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 03 May 2012, 13:55:38 UTC
addde4e Dave Airlie 02 May 2012, 19:26:24 UTC nouveau: initialise has_optimus variable. We should initialise this to 0 really to avoid getting false positives. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 03 May 2012, 08:30:58 UTC
5a8887d Gerard Lledo 28 April 2012, 08:52:37 UTC sungem: Fix WakeOnLan WakeOnLan was broken in this driver because gp->asleep_wol is a 1-bit bitfield and it was being assigned WAKE_MAGIC, which is (1 << 5). gp->asleep_wol remains 0 and the machine never wakes up. Fixed by casting gp->wake_on_lan to bool. Tested on an iBook G4. Signed-off-by: Gerard Lledo <gerard.lledo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 May 2012, 05:42:55 UTC
b49960a Eric Dumazet 02 May 2012, 02:28:41 UTC tcp: change tcp_adv_win_scale and tcp_rmem[2] tcp_adv_win_scale default value is 2, meaning we expect a good citizen skb to have skb->len / skb->truesize ratio of 75% (3/4) In 2.6 kernels we (mis)accounted for typical MSS=1460 frame : 1536 + 64 + 256 = 1856 'estimated truesize', and 1856 * 3/4 = 1392. So these skbs were considered as not bloated. With recent truesize fixes, a typical MSS=1460 frame truesize is now the more precise : 2048 + 256 = 2304. But 2304 * 3/4 = 1728. So these skb are not good citizen anymore, because 1460 < 1728 (GRO can escape this problem because it build skbs with a too low truesize.) This also means tcp advertises a too optimistic window for a given allocated rcvspace : When receiving frames, sk_rmem_alloc can hit sk_rcvbuf limit and we call tcp_prune_queue()/tcp_collapse() too often, especially when application is slow to drain its receive queue or in case of losses (netperf is fast, scp is slow). This is a major latency source. We should adjust the len/truesize ratio to 50% instead of 75% This patch : 1) changes tcp_adv_win_scale default to 1 instead of 2 2) increase tcp_rmem[2] limit from 4MB to 6MB to take into account better truesize tracking and to allow autotuning tcp receive window to reach same value than before. Note that same amount of kernel memory is consumed compared to 2.6 kernels. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 May 2012, 01:08:58 UTC
84768ed Sasha Levin 02 May 2012, 03:58:43 UTC net: l2tp: unlock socket lock before returning from l2tp_ip_sendmsg l2tp_ip_sendmsg could return without releasing socket lock, making it all the way to userspace, and generating the following warning: [ 130.891594] ================================================ [ 130.894569] [ BUG: lock held when returning to user space! ] [ 130.897257] 3.4.0-rc5-next-20120501-sasha #104 Tainted: G W [ 130.900336] ------------------------------------------------ [ 130.902996] trinity/8384 is leaving the kernel with locks still held! [ 130.906106] 1 lock held by trinity/8384: [ 130.907924] #0: (sk_lock-AF_INET){+.+.+.}, at: [<ffffffff82b9503f>] l2tp_ip_sendmsg+0x2f/0x550 Introduced by commit 2f16270 ("l2tp: Fix locking in l2tp_ip.c"). Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 May 2012, 01:04:33 UTC
4fdcfa1 Neil Horman 01 May 2012, 08:18:02 UTC drop_monitor: prevent init path from scheduling on the wrong cpu I just noticed after some recent updates, that the init path for the drop monitor protocol has a minor error. drop monitor maintains a per cpu structure, that gets initalized from a single cpu. Normally this is fine, as the protocol isn't in use yet, but I recently made a change that causes a failed skb allocation to reschedule itself . Given the current code, the implication is that this workqueue reschedule will take place on the wrong cpu. If drop monitor is used early during the boot process, its possible that two cpus will access a single per-cpu structure in parallel, possibly leading to data corruption. This patch fixes the situation, by storing the cpu number that a given instance of this per-cpu data should be accessed from. In the case of a need for a reschedule, the cpu stored in the struct is assigned the rescheule, rather than the currently executing cpu Tested successfully by myself. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> 03 May 2012, 01:02:48 UTC
a472384 tom.leiming@gmail.com 29 April 2012, 22:51:03 UTC usbnet: fix failure handling in usbnet_probe If register_netdev returns failure, the dev->interrupt and its transfer buffer should be released, so just fix it. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 May 2012, 00:13:04 UTC
720f3d7 tom.leiming@gmail.com 29 April 2012, 22:51:02 UTC usbnet: fix leak of transfer buffer of dev->interrupt The transfer buffer of dev->interrupt is allocated in .probe path, but not freed in .disconnet path, so mark the interrupt URB as URB_FREE_BUFFER to free the buffer when the URB is destroyed. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> 03 May 2012, 00:13:03 UTC
70f8002 Joakim Tjernlund 29 April 2012, 22:36:55 UTC ucc_geth: Add 16 bytes to max TX frame for VLANs Creating a VLAN interface on top of ucc_geth adds 4 bytes to the frame and the HW controller is not prepared to TX a frame bigger than 1518 bytes which is 4 bytes too small for a full VLAN frame. Add 16 bytes which will handle the a simple VLAN and leaves 12 bytes for future expansion. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David S. Miller <davem@davemloft.net> 03 May 2012, 00:09:04 UTC
5bbdc05 Joakim Tjernlund 29 April 2012, 22:36:54 UTC net: ucc_geth, increase no. of HW RX descriptors In a busy network we see ucc_geth is dropping RX pkgs every now and then. Increase the RX queues HW descriptors from 16 to 32 to deal with this. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David S. Miller <davem@davemloft.net> 03 May 2012, 00:09:04 UTC
ac001e7 Linus Torvalds 02 May 2012, 20:48:33 UTC Merge tag 'usb-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here are two EHCI Tegra driver patches for your tree. The first is a bit big, but the majority is just moving code around. It is needed due to the other EHCI core changes that went in way back in 3.4-rc1, so this driver will now properly handle suspend/resume, as it was broken. The other one is a minor bugfix that resolves an warning that people have been seeing." * tag 'usb-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: ehci-tegra: remove redundant gpio_set_value EHCI: update PM methods in ehci-tegra.c 02 May 2012, 20:48:33 UTC
c89ff23 Linus Torvalds 02 May 2012, 20:47:49 UTC Merge tag 'tty-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull a TTY fix from Greg Kroah-Hartman: "This is a deadlock bugfix that was easy to hit, and that the vt layer lock rework got wrong, so it reverts the logic back to the way it was in 3.3 and earlier kernels to prevent problems." * tag 'tty-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vt: Fix deadlock on scroll-lock 02 May 2012, 20:47:49 UTC
2f2be27 Matt Turner 02 May 2012, 02:12:12 UTC alpha: silence 'const' warning in sys_marvel.c warning: passing argument 1 of 'pci_find_capability' discards 'const' qualifier from pointer target type Signed-off-by: Matt Turner <mattst88@gmail.com> 02 May 2012, 19:54:06 UTC
8fa1964 Jim Faulkner 02 May 2012, 01:58:08 UTC alpha: include module.h to fix modpost on Tsunami Signed-off-by: Jim Faulkner <jfaulkne@ccs.neu.edu> Signed-off-by: Matt Turner <mattst88@gmail.com> 02 May 2012, 19:54:06 UTC
f8eafb5 Matt Turner 02 May 2012, 01:52:26 UTC alpha: properly define get/set_rtc_time on Marvel/SMP The marvel_get_rtc_time and marvel_set_rtc_time are static, but they're available through Marvel's machine vector. Reported-by: Raúl Porcel <armin76@gentoo.org> Signed-off-by: Matt Turner <mattst88@gmail.com> 02 May 2012, 19:54:05 UTC
dd7f1fe Matt Turner 02 May 2012, 01:28:59 UTC alpha: VGA_HOSE depends on VGA_CONSOLE arch/alpha/kernel/console.c:locate_and_init_vga uses vga_con, causing build failures if VGA_CONSOLE was not set and MARVEL, TITAN, DP264, or GENERIC alpha system types were set. Reported-by: Raúl Porcel <armin76@gentoo.org> Signed-off-by: Matt Turner <mattst88@gmail.com> 02 May 2012, 19:54:05 UTC
6200497 Marc Gariepy 01 May 2012, 17:37:57 UTC fixing dmi match for hp t5745 and hp st5747 thin client Match the correct information which is DMI_PRODUCT_NAME instead of DMI_BOARD_NAME See dmidecode information on launchpad for both thin client: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/911920 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/911916 Signed-off-by: Marc Gariepy <mgariepy@ubuntu.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 02 May 2012, 19:41:33 UTC
529acf5 Linus Torvalds 02 May 2012, 15:17:57 UTC Merge tag 'nfs-for-3.4-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client bugfixes from Trond Myklebust: - Fixes for the NFSv4 security negotiation - Use the correct hostname when mounting from a private namespace - NFS net namespace bugfixes for the pipefs filesystem - NFSv4 GETACL bugfixes - IPv6 bugfix for NFSv4 referrals * tag 'nfs-for-3.4-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4.1: Use the correct hostname in the client identifier string SUNRPC: RPC client must use the current utsname hostname string NFS: get module in idmap PipeFS notifier callback NFS: Remove unused function nfs_lookup_with_sec() NFS: Honor the authflavor set in the clone mount data NFS: Fix following referral mount points with different security NFS: Do secinfo as part of lookup NFS: Handle exceptions coming out of nfs4_proc_fs_locations() NFS: Fix SECINFO_NO_NAME SUNRPC: traverse clients tree on PipeFS event SUNRPC: set per-net PipeFS superblock before notification SUNRPC: skip clients with program without PipeFS entries SUNRPC: skip dead but not buried clients on PipeFS events Avoid beyond bounds copy while caching ACL Avoid reading past buffer when calling GETACL fix page number calculation bug for block layout decode buffer NFSv4.1 fix page number calculation bug for filelayout decode buffers pnfs-obj: Remove unused variable from objlayout_get_deviceinfo() nfs4: fix referrals on mounts that use IPv6 addrs 02 May 2012, 15:17:57 UTC
e90f3b6 Chris Wilson 30 April 2012, 18:35:02 UTC drm/i915: Only enable IPS polling for gen5 On SandyBridge IPS was entirely implemented in hardware and not reliant on the driver monitoring power consumption and feeding back desired run states, so the hardware is able to adapt quicker and more flexibly. Which is a huge relief for us as we no longer have to carry empirically derived magic algorithms. Yet despite the advance in technology, the driver was still doing its IPS polling on all machines. Restrict it to the only supported hardware, Clarkdale/Arrandale. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Andrey Rahmatullin <wrar@wrar.name> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49025 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 02 May 2012, 12:37:52 UTC
074b5e1 Chris Wilson 02 May 2012, 11:07:06 UTC drm/i915: Do not read non-existent DPLL registers on PCH hardware We only execute intel_decrease_pllclock for pre-PCH hardware, typically gen4 mobiles. However, in the variable declaration we did read from the non-PCH DPLL register, quite naughty and detected by SandyBridge. Reported-and-tested-by: Andrey Rahmatullin <wrar@wrar.name> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49025 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 02 May 2012, 12:37:51 UTC
58fa015 Jeff Layton 01 May 2012, 21:41:16 UTC cifs: add missing initialization of server->req_lock Cc: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> 02 May 2012, 03:29:51 UTC
8f71465 Jeff Layton 01 May 2012, 21:41:49 UTC cifs: don't cap ra_pages at the same level as default_backing_dev_info While testing, I've found that even when we are able to negotiate a much larger rsize with the server, on-the-wire reads often end up being capped at 128k because of ra_pages being capped at that level. Lifting this restriction gave almost a twofold increase in sequential read performance on my craptactular KVM test rig with a 1M rsize. I think this is safe since the actual ra_pages that the VM requests is run through max_sane_readahead() prior to submitting the I/O. Under memory pressure we should end up with large readahead requests being suppressed anyway. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> 02 May 2012, 03:27:54 UTC
156d179 Sachin Prabhu 25 April 2012, 11:10:14 UTC CIFS: Fix indentation in cifs_show_options Trivial patch which fixes a misplaced tab in cifs_show_options(). Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> 02 May 2012, 03:19:43 UTC
b821861 Linus Torvalds 02 May 2012, 02:43:34 UTC Merge tag 'ktest-for-v3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull two bug fixes in ktest from Steven Rostedt. * tag 'ktest-for-v3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Fix reboot on success stopping all reboots ktest.pl: Fix combined usage of BISECT_REVERSE and BISECT_SKIP 02 May 2012, 02:43:34 UTC
208d501 Linus Torvalds 02 May 2012, 00:24:05 UTC Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fixes from Ralf Baechle: "misc fixes some of which are also applicable to 3.3 and removal of an unused function. This has been sitting in -next for ages with no complaints. Also there are no known regressions due to these patches" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Remove get_current_pgd(). MIPS: ath79: fix AR933X WMAC reset code MIPS: JZ4740: Fix the JZ4740_IRQ_DMA macro MIPS: Use set_current_blocked() and block_sigmask() 02 May 2012, 00:24:05 UTC
076e777 John W. Linville 01 May 2012, 18:14:05 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 01 May 2012, 18:14:05 UTC
04c235c Stephen Warren 30 April 2012, 23:24:10 UTC USB: ehci-tegra: remove redundant gpio_set_value The immediately preceding gpio_direction_output() already set the value, so there's no need to repeat it. This also prevents gpio_set_value() from WARNing when the GPIO is sleepable (e.g. is on an I2C expander); the set direction API is always sleepable, but plain set_value isn't. Cc: <stable@vger.kernel.org> # v3.3 Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 01 May 2012, 18:11:51 UTC
ebf20de Alan Stern 01 May 2012, 15:28:49 UTC EHCI: update PM methods in ehci-tegra.c This patch (as1547) rearranges the Power Management parts of the ehci-tegra driver to match the conventions used in other EHCI platform drivers. In particular, the controller should not be powered down by the root hub's suspend routine; the controller's power level should be managed by the controller's own PM methods. The end result of the patch is that the standard ehci_bus_suspend() and ehci_bus_resume() methods can be used instead of special-purpose routines. The driver now uses the standard dev_pm_ops methods instead of legacy power management. Since there is no supported wakeup mechanism for the controller, runtime suspend is forbidden by default (this can be overridden via sysfs, if desired). These adjustments are needed in order to make ehci-tegra compatible with recent changes to the USB core. The core now checks the root hub's status following bus suspend; if the controller is automatically powered down during bus suspend then the check will fail and the root hub will be resumed immediately. Doing the controller power-down in a separate method avoids this problem. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 01 May 2012, 18:06:36 UTC
84f904e Alan Cox 01 May 2012, 15:12:19 UTC vt: Fix deadlock on scroll-lock Fixing the locking accidentally replaced a race in the scroll lock handling with a deadlock. Turn it back into a race for now. The basic problem is that there are two paths into the tty stop/start helpers. One via the tty layer ^S/^Q handling where we need to take the kbd_event_lock and one via the special keyboard handler for fn_hold where we already hold it. Probably we need to split out into a separate LED lock but for now just go back to the race as it's a bit close to release. Reported-by: Clemens Ladisch <clemens@ladisch.de> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 01 May 2012, 18:01:28 UTC
116a0fc Eric Dumazet 29 April 2012, 09:08:22 UTC netem: fix possible skb leak skb_checksum_help(skb) can return an error, we must free skb in this case. qdisc_drop(skb, sch) can also be feeded with a NULL skb (if skb_unshare() failed), so lets use this generic helper. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> 01 May 2012, 17:40:48 UTC
e072b3f stephen hemminger 30 April 2012, 06:47:37 UTC sky2: fix receive length error in mixed non-VLAN/VLAN traffic Bug: The VLAN bit of the MAC RX Status Word is unreliable in several older supported chips. Sometimes the VLAN bit is not set for valid VLAN packets and also sometimes the VLAN bit is set for non-VLAN packets that came after a VLAN packet. This results in a receive length error when VLAN hardware tagging is enabled. Fix: Variation on original fix proposed by Mirko. The VLAN information is decoded in the status loop, and can be applied to the received SKB there. This eliminates the need for the separate tag field in the interface data structure. The tag has to be copied and cleared if packet is copied. This version checked out with vlan and normal traffic. Note: vlan_tx_tag_present should be renamed vlan_tag_present, but that is outside scope of this. Reported-by: Mirko Lindner <mlindner@marvell.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 May 2012, 17:39:13 UTC
3f42941 stephen hemminger 30 April 2012, 05:49:45 UTC sky2: propogate rx hash when packet is copied When a small packet is received, the driver copies it to a new skb to allow reusing the full size Rx buffer. The copy was propogating the checksum offload but not the receive hash information. The bug is impact was mostly harmless and therefore not observed until reviewing this area of code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 May 2012, 17:39:13 UTC
bdc71c9 Guenter Roeck 01 May 2012, 15:15:42 UTC hwmon: (coretemp) Increase CPU core limit CPU core ID is used to index the core_data[] array. The core ID is, however, not sequential; 10-core CPUS can have a core ID as high as 25. Increase the limit to 32 to be able to deal with current CPUs. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@vger.kernel.org # 3.0+ Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Durgadoss R <durgadoss.r@intel.com> 01 May 2012, 16:16:14 UTC
b704871 Kirill A. Shutemov 30 April 2012, 13:18:01 UTC hwmon: (coretemp) fix oops on cpu unplug coretemp tries to access core_data array beyond bounds on cpu unplug if core id of the cpu if more than NUM_REAL_CORES-1. BUG: unable to handle kernel NULL pointer dereference at 000000000000013c IP: [<ffffffffa00159af>] coretemp_cpu_callback+0x93/0x1ba [coretemp] PGD 673e5a067 PUD 66e9b3067 PMD 0 Oops: 0000 [#1] SMP CPU 79 Modules linked in: sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter nf_conntrack_ipv4 nf_defrag_ipv4 ip6_tables xt_state nf_conntrack coretemp crc32c_intel asix tpm_tis pcspkr usbnet iTCO_wdt i2c_i801 microcode mii joydev tpm i2c_core iTCO_vendor_support tpm_bios i7core_edac igb ioatdma edac_core dca megaraid_sas [last unloaded: oprofile] Pid: 3315, comm: set-cpus Tainted: G W 3.4.0-rc5+ #2 QCI QSSC-S4R/QSSC-S4R RIP: 0010:[<ffffffffa00159af>] [<ffffffffa00159af>] coretemp_cpu_callback+0x93/0x1ba [coretemp] RSP: 0018:ffff880472fb3d48 EFLAGS: 00010246 RAX: 0000000000000124 RBX: 0000000000000034 RCX: 00000000ffffffff RDX: 0000000000000000 RSI: 0000000000000046 RDI: 0000000000000246 RBP: ffff880472fb3d88 R08: ffff88077fcd36c0 R09: 0000000000000001 R10: ffffffff8184bc48 R11: 0000000000000000 R12: ffff880273095800 R13: 0000000000000013 R14: ffff8802730a1810 R15: 0000000000000000 FS: 00007f694a20f720(0000) GS:ffff88077fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000000013c CR3: 000000067209b000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process set-cpus (pid: 3315, threadinfo ffff880472fb2000, task ffff880471fa0000) Stack: ffff880277b4c308 0000000000000003 ffff880472fb3d88 0000000000000005 0000000000000034 00000000ffffffd1 ffffffff81cadc70 ffff880472fb3e14 ffff880472fb3dc8 ffffffff8161f48d ffff880471fa0000 0000000000000034 Call Trace: [<ffffffff8161f48d>] notifier_call_chain+0x4d/0x70 [<ffffffff8107f1be>] __raw_notifier_call_chain+0xe/0x10 [<ffffffff81059d30>] __cpu_notify+0x20/0x40 [<ffffffff815fa251>] _cpu_down+0x81/0x270 [<ffffffff815fa477>] cpu_down+0x37/0x50 [<ffffffff815fd6a3>] store_online+0x63/0xc0 [<ffffffff813c7078>] dev_attr_store+0x18/0x30 [<ffffffff811f02cf>] sysfs_write_file+0xef/0x170 [<ffffffff81180443>] vfs_write+0xb3/0x180 [<ffffffff8118076a>] sys_write+0x4a/0x90 [<ffffffff816236a9>] system_call_fastpath+0x16/0x1b Code: 48 c7 c7 94 60 01 a0 44 0f b7 ac 10 ac 00 00 00 31 c0 e8 41 b7 5f e1 41 83 c5 02 49 63 c5 49 8b 44 c4 10 48 85 c0 74 56 45 31 ff <39> 58 18 75 4e eb 1f 49 63 d7 4c 89 f7 48 89 45 c8 48 6b d2 28 RIP [<ffffffffa00159af>] coretemp_cpu_callback+0x93/0x1ba [coretemp] RSP <ffff880472fb3d48> CR2: 000000000000013c Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> 01 May 2012, 15:18:05 UTC
d961949 Eric Dumazet 30 April 2012, 21:29:16 UTC net: fix two typos in skbuff.h fix kernel doc typos in function names Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 May 2012, 13:40:19 UTC
759a3cc Steven Rostedt 01 May 2012, 12:20:12 UTC ktest: Fix reboot on success stopping all reboots The change to let individual tests decide to reboot the machine on success of the entire test also prevented errors from rebooting when an error was detected. The "no_reboot" variable was only cleared if the test had reboot_on_success set. But the no_reboot variable also prevents the test rebooting when an error was detected even when REBOOT_ON_ERROR was set. Add a new "reboot_success" variable that is used to determine if the test should reboot on success and not touch the no_reboot variable. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 01 May 2012, 12:25:48 UTC
5158ba3 Russ Dill 24 April 2012, 02:43:00 UTC ktest.pl: Fix combined usage of BISECT_REVERSE and BISECT_SKIP When BISECT_REVERSE and BISECT_SKIP are used together with boot or test testing, build failures are treated as boot or test failures and 'git bisect bad' is executed instead of 'git bisect skip'. This is because the $ret value of -1 is treated as a build failure, but the $reverse_bisect logic does not properly handle this. Simple fix, only invert it if it is positive. Link: http://lkml.kernel.org/r/1335235380-8509-1-git-send-email-Russ.Dill@ti.com Signed-off-by: Russ Dill <Russ.Dill@ti.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 01 May 2012, 12:25:44 UTC
e658624 Dave Airlie 01 May 2012, 11:25:06 UTC Merge branch 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes * 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nv10/gpio: fix thinko in mask for gpio lines 2-9 nvc0/fb: shut up PMFB interrupt after the first occurrence drm/nouveau/hdmi: use correct hdmi regs for nvaa/nvac drm/nouveau/bios: fix regression on some nv4x board 01 May 2012, 11:25:06 UTC
13176a8 Russ Dill 22 April 2012, 08:48:18 UTC mfd: Fix build breakage in omap-usb-host.c 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' removes the include for linux/gpio.h from omap-usb-host.c. This include indirectly includes plat/cpu.h which is required by omap-usb-host.c. Fix the build breakage by including it directly. Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Russ Dill <Russ.Dill@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 01 May 2012, 09:55:04 UTC
60158e6 Roland Dreier 30 April 2012, 07:15:47 UTC cxgb3: Don't call cxgb_vlan_mode until q locks are initialized The driver calls cxgb_vlan_mode() from init_one(). This calls into synchronize_rx(), which locks all the q locks, but the q locks are not initialized until cxgb_up() -> setup_sge_qsets(). So move the call to cxgb_vlan_mode() into cxgb_up(), after the call to setup_sge_qsets(). We also move the body of these functions up higher to avoid having to a forward declaration. This was found because of the lockdep warning: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 323, comm: work_for_cpu Not tainted 3.4.0-rc5 #28 Call Trace: [<ffffffff8106e767>] register_lock_class+0x108/0x2d0 [<ffffffff8106ff42>] __lock_acquire+0xd3/0xd06 [<ffffffff81070fd0>] lock_acquire+0xbf/0xfe [<ffffffff813862a6>] _raw_spin_lock_irq+0x36/0x45 [<ffffffffa01e71aa>] cxgb_vlan_mode+0x96/0xcb [cxgb3] [<ffffffffa01f90eb>] init_one+0x8c4/0x980 [cxgb3] [<ffffffff811fcbf0>] local_pci_probe+0x3f/0x70 [<ffffffff81042206>] do_work_for_cpu+0x10/0x22 [<ffffffff810482de>] kthread+0xa1/0xa9 [<ffffffff8138e234>] kernel_thread_helper+0x4/0x10 Contrary to what lockdep says, the code is not fine: we are locking an uninitialized spinlock. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 May 2012, 02:08:44 UTC
787cb2a David S. Miller 01 May 2012, 02:04:20 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net 01 May 2012, 02:04:20 UTC
441e171 Yi Zou 20 April 2012, 05:48:08 UTC ixgbe: fix calling skb_put on nonlinear skb assertion bug With the support to bounce buffer added, the skb is coming as nonlinear in the case of non-DDPed data frames for FCoE, which is mostly ok as the FCoE stack would take care of that. However, for target mode, we have to set the FC CRC and FC EOF field to allow the protocol stack to not drop the frame for the last data frame of that sequence. So fix this by linearizing the skb first before doing skb_put(). Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 01 May 2012, 01:54:52 UTC
2b1588c Alexander Duyck 17 March 2012, 02:39:16 UTC ixgbe: Fix a memory leak in IEEE DCB The driver was freeing memory in shutdown instead of remove. As a result we were leaking memory if IEEE DCB was enabled and we loaded/unloaded the driver. This change moves the freeing of the memory into the remove routine where it belongs. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 01 May 2012, 01:54:43 UTC
9bd1be4 Samuel Liao 27 April 2012, 17:09:27 UTC igbvf: fix the bug when initializing the igbvf Maybe it's a typo, but it cause that igbvf can't be initialized successfully. Set perm_addr value using valid dev_addr, although which is equal to hw.mac.addr. Signed-off-by: Samuel Liao <samuelliao@tencent.com> Signed-off-by: Shan Wei <davidshan@tencent.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 01 May 2012, 01:54:31 UTC
2f3a081 Steve Glendinning 30 April 2012, 07:56:56 UTC smsc75xx: enable mac to detect speed/duplex from phy This patch sets the automatic speed and duplex detection bits in MAC_CR to enable the mac to determine its speed automatically from the phy. Note this must be done BEFORE the receiver or transmitter is enabled. Signed-off-by: Stephane Fillod <fillods@users.sf.net> Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net> 01 May 2012, 01:52:42 UTC
c0b92e4 Steve Glendinning 30 April 2012, 07:56:55 UTC smsc75xx: declare smsc75xx's MII as GMII capable also explicitly set the phy to advertise 1000 speeds Signed-off-by: Stephane Fillod <fillods@users.sf.net> Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net> 01 May 2012, 01:52:42 UTC
b140504 Steve Glendinning 30 April 2012, 07:56:54 UTC smsc75xx: fix phy interrupt acknowledge smsc75xx phy interrupt acknowledge needs an mdio_write to clear PHY_INT_SRC instead of just a read like in smsc95xx. Signed-off-by: Stephane Fillod <fillods@users.sf.net> Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net> 01 May 2012, 01:52:41 UTC
8a1d59d Steve Glendinning 30 April 2012, 07:56:53 UTC smsc75xx: fix phy init reset loop fix bug in phy_init loop that was ignoring BMCR reset bit, akin to smsc95xx's d946092000698fd204d82a9d239103c656fb63bf Signed-off-by: Stephane Fillod <fillods@users.sf.net> Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net> 01 May 2012, 01:52:40 UTC
4f49add Steve Glendinning 30 April 2012, 07:56:52 UTC smsc75xx: add more information to register io failure warnings Signed-off-by: Stephane Fillod <fillods@users.sf.net> Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net> 01 May 2012, 01:52:40 UTC
back to top