Skip to main content

Browse the archive

swh:1:snp:c3bf2749e3476071fa748f67b0ffa2fdc5fe49d9
sort by:
Revision Author Date Message Commit Date
14c7cca Liu Bo 11 September 2011, 14:52:24 UTC Btrfs: fix an oops when deleting snapshots We can reproduce this oops via the following steps: $ mkfs.btrfs /dev/sdb7 $ mount /dev/sdb7 /mnt/btrfs $ for ((i=0; i<3; i++)); do btrfs sub snap /mnt/btrfs /mnt/btrfs/s_$i; done $ rm -fr /mnt/btrfs/* $ rm -fr /mnt/btrfs/* then we'll get ------------[ cut here ]------------ kernel BUG at fs/btrfs/inode.c:2264! [...] Call Trace: [<ffffffffa05578c7>] btrfs_rmdir+0xf7/0x1b0 [btrfs] [<ffffffff81150b95>] vfs_rmdir+0xa5/0xf0 [<ffffffff81153cc3>] do_rmdir+0x123/0x140 [<ffffffff81145ac7>] ? fput+0x197/0x260 [<ffffffff810aecff>] ? audit_syscall_entry+0x1bf/0x1f0 [<ffffffff81153d0d>] sys_unlinkat+0x2d/0x40 [<ffffffff8147896b>] system_call_fastpath+0x16/0x1b RIP [<ffffffffa054f7b9>] btrfs_orphan_add+0x179/0x1a0 [btrfs] When it comes to btrfs_lookup_dentry, we may set a snapshot's inode->i_ino to BTRFS_EMPTY_SUBVOL_DIR_OBJECTID instead of BTRFS_FIRST_FREE_OBJECTID, while the snapshot's location.objectid remains unchanged. However, btrfs_ino() does not take this into account, and returns a wrong ino, and causes the oops. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 11 September 2011, 14:52:24 UTC
f1e490a Josef Bacik 18 August 2011, 14:36:39 UTC Btrfs: set i_size properly when fallocating and we already xfstests exposed a problem with preallocate when it fallocates a range that already has an extent. We don't set the new i_size properly because we see that we already have an extent. This isn't right and we should update i_size if the space already exists. With this patch we now pass xfstests 075. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 18 August 2011, 14:36:39 UTC
f81c9cd Sage Weil 10 August 2011, 18:04:04 UTC Btrfs: truncate pages from clone ioctl target range We need to truncate page cache pages for the clone ioctl target range or else we'll confuse ourselves to no end. If the old data was cached, we used to still see it (until remount). If the page was partially updated we used to get a mix of old and new data. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com> 17 August 2011, 01:09:31 UTC
0e58885 Miao Xie 05 August 2011, 09:32:37 UTC Btrfs: fix uninitialized sync_pending sync_pending is uninitialized before it be used, fix it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 17 August 2011, 01:09:31 UTC
bb3ac5a Miao Xie 05 August 2011, 09:32:35 UTC Btrfs: fix wrong free space information Btrfs subtracted the size of the allocated space twice when it allocated the space from the bitmap in the cluster, it broke the free space information and led to oops finally. And this patch also fixes the bug that ctl->free_space was subtracted without lock. Reported-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 17 August 2011, 01:09:31 UTC
f4ac904 Dan Carpenter 05 August 2011, 14:19:00 UTC btrfs: memory leak in btrfs_add_inode_defrag() We don't use the defrag struct on this path. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 17 August 2011, 01:09:15 UTC
c97c291 Li Zefan 03 August 2011, 08:11:41 UTC Btrfs: use plain page_address() in header fields setget functions We've stopped using highmem for extent buffers. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 17 August 2011, 01:09:15 UTC
cb1b69f Tsutomu Itoh 09 August 2011, 07:11:13 UTC Btrfs: forced readonly when btrfs_drop_snapshot() fails The filesystem turns readonly instead of returning the error to the caller when detected error in btrfs_drop_snapshot(). and, because the caller doesn't check the error, the function type is changed to 'void'. Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 17 August 2011, 01:09:15 UTC
cdcb725 liubo 03 August 2011, 10:15:25 UTC Btrfs: check if there is enough space for balancing smarter When checking if there is enough space for balancing a block group, since we do not take raid types into consideration, we do not account corrent amounts of space that we needed. This makes us do some extra work before we get ENOSPC. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 17 August 2011, 01:09:15 UTC
38c01b9 liubo 02 August 2011, 02:39:03 UTC Btrfs: fix a bug of balance on full multi-disk partitions When balancing, we'll first try to shrink devices for some space, but if it is working on a full multi-disk partition with raid protection, we may encounter a bug, that is, while shrinking, total_bytes may be less than bytes_used, and btrfs may allocate a dev extent that accesses out of device's bounds. Then we will not be able to write or read the data which stores at the end of the device, and get the followings: device fsid 0939f071-7ea3-46c8-95df-f176d773bfb6 devid 1 transid 10 /dev/sdb5 Btrfs detected SSD devices, enabling SSD mode btrfs: relocating block group 476315648 flags 9 btrfs: found 4 extents attempt to access beyond end of device sdb5: rw=145, want=546176, limit=546147 attempt to access beyond end of device sdb5: rw=145, want=546304, limit=546147 attempt to access beyond end of device sdb5: rw=145, want=546432, limit=546147 attempt to access beyond end of device sdb5: rw=145, want=546560, limit=546147 attempt to access beyond end of device Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 17 August 2011, 01:09:15 UTC
34f3e4f liubo 06 August 2011, 08:35:23 UTC Btrfs: fix an oops of log replay When btrfs recovers from a crash, it may hit the oops below: ------------[ cut here ]------------ kernel BUG at fs/btrfs/inode.c:4580! [...] RIP: 0010:[<ffffffffa03df251>] [<ffffffffa03df251>] btrfs_add_link+0x161/0x1c0 [btrfs] [...] Call Trace: [<ffffffffa03e7b31>] ? btrfs_inode_ref_index+0x31/0x80 [btrfs] [<ffffffffa04054e9>] add_inode_ref+0x319/0x3f0 [btrfs] [<ffffffffa0407087>] replay_one_buffer+0x2c7/0x390 [btrfs] [<ffffffffa040444a>] walk_down_log_tree+0x32a/0x480 [btrfs] [<ffffffffa0404695>] walk_log_tree+0xf5/0x240 [btrfs] [<ffffffffa0406cc0>] btrfs_recover_log_trees+0x250/0x350 [btrfs] [<ffffffffa0406dc0>] ? btrfs_recover_log_trees+0x350/0x350 [btrfs] [<ffffffffa03d18b2>] open_ctree+0x1442/0x17d0 [btrfs] [...] This comes from that while replaying an inode ref item, we forget to check those old conflicting DIR_ITEM and DIR_INDEX items in fs/file tree, then we will come to conflict corners which lead to BUG_ON(). Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Tested-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Chris Mason <chris.mason@oracle.com> 17 August 2011, 01:09:15 UTC
d5e2003 Josef Bacik 04 August 2011, 14:52:27 UTC Btrfs: detect wether a device supports discard We have a problem where if a user specifies discard but doesn't actually support it we will return EOPNOTSUPP from btrfs_discard_extent. This is a problem because this gets called (in a fashion) from the tree log recovery code, which has a nice little BUG_ON(ret) after it, which causes us to fail the tree log replay. So instead detect wether our devices support discard when we're adding them and then don't issue discards if we know that the device doesn't support it. And just for good measure set ret = 0 in btrfs_issue_discard just in case we still get EOPNOTSUPP so we don't screw anybody up like this again. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 17 August 2011, 01:09:15 UTC
2ab1ba6 Chris Mason 04 August 2011, 18:28:36 UTC Btrfs: force unplugs when switching from high to regular priority bios Btrfs does bio submissions from a worker thread, and each device has a list of high priority bios and regular priority bios. Synchronous writes go to the high priority thread while async writes go to regular list. This commit brings back an explicit unplug any time we switch from high to regular priority, which makes it easier for the block layer to give us low latencies. Signed-off-by: Chris Mason <chris.mason@oracle.com> 05 August 2011, 17:48:18 UTC
0d10ee2 Josef Bacik 01 August 2011, 18:37:36 UTC Btrfs: don't call writepages from within write_full_page When doing a writepage we call writepages to try and write out any other dirty pages in the area. This could cause problems where we commit a transaction and then have somebody else dirtying metadata in the area as we could end up writing out a lot more than we care about, which could cause latency on anybody who is waiting for the transaction to completely finish committing. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:37:36 UTC
341d14f Mitch Harder 12 July 2011, 19:43:45 UTC Btrfs: Remove unused variable 'last_index' in file.c The variable 'last_index' is calculated in the __btrfs_buffered_write function and passed as a parameter to the prepare_pages function, but is not used anywhere in the prepare_pages function. Remove instances of 'last_index' in these functions. Signed-off-by: Mitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:32:39 UTC
69261c4 Xiao Guangrong 14 July 2011, 03:19:45 UTC Btrfs: clean up for find_first_extent_bit() find_first_extent_bit() and find_first_extent_bit_state() share most of the code, and we can just make the former call the latter. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:32:39 UTC
ded91f0 Xiao Guangrong 14 July 2011, 03:19:27 UTC Btrfs: clean up for wait_extent_bit() We can just use cond_resched_lock(). Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:32:38 UTC
3150b69 Xiao Guangrong 14 July 2011, 03:19:08 UTC Btrfs: clean up for insert_state() Don't duplicate set_state_bits(). Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:32:30 UTC
3a6d457 Xiao Guangrong 14 July 2011, 03:18:52 UTC Btrfs: remove unused members from struct extent_state These members are not used at all. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:50 UTC
4d2c8f6 Li Zefan 14 July 2011, 03:18:33 UTC Btrfs: clean up code for merging extent maps unpin_extent_cache() and add_extent_mapping() shares the same code that merges extent maps. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:50 UTC
ed64f06 Li Zefan 14 July 2011, 03:18:15 UTC Btrfs: clean up code for extent_map lookup lookup_extent_map() and search_extent_map() can share most of code. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:49 UTC
7e016a0 Li Zefan 14 July 2011, 03:18:03 UTC Btrfs: clean up search_extent_mapping() rb_node returned by __tree_search() can be a valid pointer or NULL, but won't be some errno. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:49 UTC
85d85a7 Li Zefan 14 July 2011, 03:17:52 UTC Btrfs: remove redundant code for dir item lookup When we search a dir item with a specific hash code, we can just return NULL without further checking if btrfs_search_slot() returns 1. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:48 UTC
9b89d95 Li Zefan 14 July 2011, 03:17:39 UTC Btrfs: make acl functions really no-op if acl is not enabled So there's no overhead for something we don't use. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:48 UTC
15de900 Li Zefan 14 July 2011, 03:17:27 UTC Btrfs: remove remaining ref-cache code Since commit f2a97a9dbd86eb1ef956bdf20e05c507b32beb96 ("btrfs: remove all unused functions"), there's no extern functions at all in ref-cache.c, so just remove the remaining dead code. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:47 UTC
b9c8300 Li Zefan 14 July 2011, 03:17:14 UTC Btrfs: remove a BUG_ON() in btrfs_commit_transaction() wait_for_commit() always returns 0. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:47 UTC
72d63ed Li Zefan 14 July 2011, 03:17:00 UTC Btrfs: use wait_event() Use wait_event() when possible to avoid code duplication. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:46 UTC
e55179b Li Zefan 14 July 2011, 03:16:47 UTC Btrfs: check the nodatasum flag when writing compressed files If mounting with nodatasum option, we won't csum file data for general write or direct-io write, and this rule should also be applied when writing compressed files. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:46 UTC
77906a5 Li Zefan 14 July 2011, 03:16:00 UTC Btrfs: copy string correctly in INO_LOOKUP ioctl Memory areas [ptr, ptr+total_len] and [name, name+total_len] may overlap, so it's wrong to use memcpy(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:45 UTC
b783e62 Josef Bacik 13 July 2011, 15:03:50 UTC Btrfs: don't print the leaf if we had an error In __btrfs_free_extent we will print the leaf if we fail to find the extent we wanted, but the problem is if we get an error we won't have a leaf so often this leads to a NULL pointer dereference and we lose the error that actually occurred. So only print the leaf if ret > 0, which means we didn't find the item we were looking for but we didn't error either. This way the error is preserved. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:45 UTC
bf5f32e Mark Fasheh 14 July 2011, 21:23:06 UTC btrfs: make btrfs_set_root_node void This is fairly trivial - btrfs_set_root_node() - always returns zero so we can just make it void. All callers ignore the return code now anyway. I also made sure to check that none of the functions that btrfs_set_root_node() calls returns an error that we might have needed to catch and pass back. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:44 UTC
ff1f2b4 liubo 27 July 2011, 09:49:18 UTC Btrfs: fix oops while writing data to SSD partitions Here I have a two SSD-partitions btrfs, and they are defaultly set to "data=raid0, metadata=raid1", then I try to fill my btrfs partition till "No space left on device", via "dd if=/dev/zero of=/mnt/btrfs/tmp". I get an oops panic from kernel BUG at fs/btrfs/extent-tree.c:5199!, which refers to find_free_extent's BUG_ON(index != get_block_group_index(block_group)); In SSD mode, in order to find enough space to alloc, we may check the block_group cache which has been checked sometime before, but the index is not updated, where it hits the BUG_ON. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Acked-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:44 UTC
61cfea9 WuBo 26 July 2011, 03:30:11 UTC Btrfs: Protect the readonly flag of block group The access for ro in btrfs_block_group_cache should be protected because of the racy lock in relocation. Signed-off-by: Wu Bo <wu.bo@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:43 UTC
1bf8504 Jeff Mahoney 21 July 2011, 16:56:09 UTC btrfs: Make extent-io callbacks that never fail return void The set/clear bit and the extent split/merge hooks only ever return 0. Changing them to return void simplifies the error handling cases later. This patch changes the hook prototypes, the single implementation of each, and the functions that call them to return void instead. Since all four of these hooks execute under a spinlock, they're necessarily simple. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:43 UTC
b6973aa Li Zefan 20 July 2011, 03:46:35 UTC Btrfs: fix readahead in file defrag We passed the wrong value to btrfs_force_ra(). Fix this by changing the argument of btrfs_force_ra() from last_index to nr_page. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:42 UTC
b532402 Tsutomu Itoh 19 July 2011, 07:27:20 UTC Btrfs: return error to caller when btrfs_unlink() failes When btrfs_unlink_inode() and btrfs_orphan_add() in btrfs_unlink() are error, the error code is returned to the caller instead of BUG_ON(). Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:42 UTC
a0f98dd Wanlong Gao 18 July 2011, 12:19:35 UTC Btrfs:don't check the return value of __btrfs_add_inode_defrag Don't need to check the return value of __btrfs_add_inode_defrag(), since it will always return 0. Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 01 August 2011, 18:30:41 UTC
b43b31b Chris Mason 01 August 2011, 18:27:34 UTC Merge branch 'alloc_path' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/btrfs-error-handling into for-linus 01 August 2011, 18:27:34 UTC
ff95acb Chris Mason 27 July 2011, 20:13:10 UTC Merge branch 'integration' into for-linus 27 July 2011, 20:18:13 UTC
75c195a Chris Mason 27 July 2011, 19:57:44 UTC Btrfs: make sure reserve_metadata_bytes doesn't leak out strange errors The btrfs transaction code will return any errors that come from reserve_metadata_bytes. We need to make sure we don't return funny things like 1 or EAGAIN. Signed-off-by: Chris Mason <chris.mason@oracle.com> 27 July 2011, 20:11:41 UTC
2cf8572 Chris Mason 26 July 2011, 19:35:09 UTC Btrfs: use the commit_root for reading free_space_inode crcs Now that we are using regular file crcs for the free space cache, we can deadlock if we try to read the free_space_inode while we are updating the crc tree. This commit fixes things by using the commit_root to read the crcs. This is safe because we the free space cache file would already be loaded if that block group had been changed in the current transaction. Signed-off-by: Chris Mason <chris.mason@oracle.com> 27 July 2011, 16:46:48 UTC
19b6caf Chris Mason 25 July 2011, 10:50:50 UTC Btrfs: reduce extent_state lock contention for metadata For metadata buffers that don't straddle pages (all of them), btrfs can safely use the page uptodate bits and extent_buffer uptodate bit instead of needing to use the extent_state tree. This greatly reduces contention on the state tree lock. Signed-off-by: Chris Mason <chris.mason@oracle.com> 27 July 2011, 16:46:47 UTC
31533fb Chris Mason 26 July 2011, 20:01:59 UTC Btrfs: remove lockdep magic from btrfs_next_leaf Before the reader/writer locks, btrfs_next_leaf needed to keep the path blocking to avoid making lockdep upset. Now that btrfs_next_leaf only takes read locks, this isn't required. Signed-off-by: Chris Mason <chris.mason@oracle.com> 27 July 2011, 16:46:47 UTC
85d4e46 Chris Mason 26 July 2011, 20:11:19 UTC Btrfs: make a lockdep class for each root This patch was originally from Tejun Heo. lockdep complains about the btrfs locking because we sometimes take btree locks from two different trees at the same time. The current classes are based only on level in the btree, which isn't enough information for lockdep to figure out if the lock is safe. This patch makes a class for each type of tree, and lumps all the FS trees that actually have files and directories into the same class. Signed-off-by: Chris Mason <chris.mason@oracle.com> 27 July 2011, 16:46:46 UTC
bd68151 Chris Mason 16 July 2011, 19:23:14 UTC Btrfs: switch the btrfs tree locks to reader/writer The btrfs metadata btree is the source of significant lock contention, especially in the root node. This commit changes our locking to use a reader/writer lock. The lock is built on top of rw spinlocks, and it extends the lock tracking to remember if we have a read lock or a write lock when we go to blocking. Atomics count the number of blocking readers or writers at any given time. It removes all of the adaptive spinning from the old code and uses only the spinning/blocking hints inside of btrfs to decide when it should continue spinning. In read heavy workloads this is dramatically faster. In write heavy workloads we're still faster because of less contention on the root node lock. We suffer slightly in dbench because we schedule more often during write locks, but all other benchmarks so far are improved. Signed-off-by: Chris Mason <chris.mason@oracle.com> 27 July 2011, 16:46:46 UTC
81317fd Josef Bacik 24 July 2011, 19:45:34 UTC Btrfs: fix deadlock when throttling transactions Hit this nice little deadlock. What happens is this __btrfs_end_transaction with throttle set, --use_count so it equals 0 btrfs_commit_transaction <somebody else actually manages to start the commit> btrfs_end_transaction --use_count so now its -1 <== BAD we just return and wait on the transaction This is bad because we just return after our use_count is -1 and don't let go of our num_writer count on the transaction, so the guy committing the transaction just sits there forever. Fix this by inc'ing our use_count if we're going to call commit_transaction so that if we call btrfs_end_transaction it's valid. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 27 July 2011, 16:46:46 UTC
a659171 Chris Mason 19 July 2011, 16:04:14 UTC Btrfs: stop using highmem for extent_buffers The extent_buffers have a very complex interface where we use HIGHMEM for metadata and try to cache a kmap mapping to access the memory. The next commit adds reader/writer locks, and concurrent use of this kmap cache would make it even more complex. This commit drops the ability to use HIGHMEM with extent buffers, and rips out all of the related code. Signed-off-by: Chris Mason <chris.mason@oracle.com> 27 July 2011, 16:46:45 UTC
199c36e Miao Xie 15 July 2011, 10:34:36 UTC Btrfs: fix BUG_ON() caused by ENOSPC when relocating space When we balanced the chunks across the devices, BUG_ON() in __finish_chunk_alloc() was triggered. ------------[ cut here ]------------ kernel BUG at fs/btrfs/volumes.c:2568! [SNIP] Call Trace: [<ffffffffa049525e>] btrfs_alloc_chunk+0x8e/0xa0 [btrfs] [<ffffffffa04546b0>] do_chunk_alloc+0x330/0x3a0 [btrfs] [<ffffffffa045c654>] btrfs_reserve_extent+0xb4/0x1f0 [btrfs] [<ffffffffa045c86b>] btrfs_alloc_free_block+0xdb/0x350 [btrfs] [<ffffffffa048a8d8>] ? read_extent_buffer+0xd8/0x1d0 [btrfs] [<ffffffffa04476fd>] __btrfs_cow_block+0x14d/0x5e0 [btrfs] [<ffffffffa044660d>] ? read_block_for_search+0x14d/0x4d0 [btrfs] [<ffffffffa0447c9b>] btrfs_cow_block+0x10b/0x240 [btrfs] [<ffffffffa044dd5e>] btrfs_search_slot+0x49e/0x7a0 [btrfs] [<ffffffffa044f07d>] btrfs_insert_empty_items+0x8d/0xf0 [btrfs] [<ffffffffa045e973>] insert_with_overflow+0x43/0x110 [btrfs] [<ffffffffa045eb0d>] btrfs_insert_dir_item+0xcd/0x1f0 [btrfs] [<ffffffffa0489bd0>] ? map_extent_buffer+0xb0/0xc0 [btrfs] [<ffffffff812276ad>] ? rb_insert_color+0x9d/0x160 [<ffffffffa046cc40>] ? inode_tree_add+0xf0/0x150 [btrfs] [<ffffffffa0474801>] btrfs_add_link+0xc1/0x1c0 [btrfs] [<ffffffff811dacac>] ? security_inode_init_security+0x1c/0x30 [<ffffffffa04a28aa>] ? btrfs_init_acl+0x4a/0x180 [btrfs] [<ffffffffa047492f>] btrfs_add_nondir+0x2f/0x70 [btrfs] [<ffffffffa046af16>] ? btrfs_init_inode_security+0x46/0x60 [btrfs] [<ffffffffa0474ac0>] btrfs_create+0x150/0x1d0 [btrfs] [<ffffffff81159c63>] ? generic_permission+0x23/0xb0 [<ffffffff8115b415>] vfs_create+0xa5/0xc0 [<ffffffff8115ce6e>] do_last+0x5fe/0x880 [<ffffffff8115dc0d>] path_openat+0xcd/0x3d0 [<ffffffff8115e029>] do_filp_open+0x49/0xa0 [<ffffffff8116a965>] ? alloc_fd+0x95/0x160 [<ffffffff8114f0c7>] do_sys_open+0x107/0x1e0 [<ffffffff810bcc3f>] ? audit_syscall_entry+0x1bf/0x1f0 [<ffffffff8114f1e0>] sys_open+0x20/0x30 [<ffffffff81484ec2>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa049444a>] __finish_chunk_alloc+0x20a/0x220 [btrfs] The reason is: Task1 Space balance task do_chunk_alloc() __finish_chunk_alloc() update device info in the chunk tree alloc system metadata block relocate system metadata block group set system metadata block group readonly, This block group is the only one that can allocate space. So there is no free space that can be allocated now. find no space and don't try to alloc new chunk, and then return ENOSPC BUG_ON() in __finish_chunk_alloc() was triggered. Fix this bug by allocating a new system metadata chunk before relocating the old one if we find there is no free space which can be allocated after setting the old block group to be read-only. Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 27 July 2011, 16:46:45 UTC
f7aaa06 Josef Bacik 15 July 2011, 21:26:38 UTC Btrfs: tag pages for writeback in sync Everybody else does this, we need to do it too. If we're syncing, we need to tag the pages we're going to write for writeback so we don't end up writing the same stuff over and over again if somebody is constantly redirtying our file. This will keep us from having latencies with heavy sync workloads. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 27 July 2011, 16:46:44 UTC
9e0baf6 Josef Bacik 15 July 2011, 15:16:44 UTC Btrfs: fix enospc problems with delalloc So I had this brilliant idea to use atomic counters for outstanding and reserved extents, but this turned out to be a bad idea. Consider this where we have 1 outstanding extent and 1 reserved extent Reserver Releaser atomic_dec(outstanding) now 0 atomic_read(outstanding)+1 get 1 atomic_read(reserved) get 1 don't actually reserve anything because they are the same atomic_cmpxchg(reserved, 1, 0) atomic_inc(outstanding) atomic_add(0, reserved) free reserved space for 1 extent Then the reserver now has no actual space reserved for it, and when it goes to finish the ordered IO it won't have enough space to do it's allocation and you get those lovely warnings. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 27 July 2011, 16:46:44 UTC
a599142 Josef Bacik 15 July 2011, 16:01:03 UTC Btrfs: don't flush delalloc arbitrarily Kill the check to see if we have 512mb of reserved space in delalloc and shrink_delalloc if we do. This causes unexpected latencies and we have other logic to see if we need to throttle. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 27 July 2011, 16:46:43 UTC
a94733d Josef Bacik 11 July 2011, 14:47:06 UTC Btrfs: use find_or_create_page instead of grab_cache_page grab_cache_page will use mapping_gfp_mask(), which for all inodes is set to GFP_HIGHUSER_MOVABLE. So instead use find_or_create_page in all cases where we need GFP_NOFS so we don't deadlock. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> 27 July 2011, 16:46:43 UTC
bab39bf Josef Bacik 30 June 2011, 18:42:28 UTC Btrfs: use a worker thread to do caching A user reported a deadlock when copying a bunch of files. This is because they were low on memory and kthreadd got hung up trying to migrate pages for an allocation when starting the caching kthread. The page was locked by the person starting the caching kthread. To fix this we just need to use the async thread stuff so that the threads are already created and we don't have to worry about deadlocks. Thanks, Reported-by: Roman Mamedov <rm@romanrm.ru> Signed-off-by: Josef Bacik <josef@redhat.com> 27 July 2011, 16:46:25 UTC
38a1a91 Mark Fasheh 13 July 2011, 17:59:59 UTC btrfs: don't BUG_ON allocation errors in btrfs_drop_snapshot In addition to properly handling allocation failure from btrfs_alloc_path, I also fixed up the kzalloc error handling code immediately below it. Signed-off-by: Mark Fasheh <mfasheh@suse.com> 25 July 2011, 21:35:15 UTC
92b8e89 Mark Fasheh 12 July 2011, 17:57:59 UTC btrfs: Don't BUG_ON alloc_path errors in find_next_chunk I also removed the BUG_ON from error return of find_next_chunk in init_first_rw_device(). It turns out that the only caller of init_first_rw_device() also BUGS on any nonzero return so no actual behavior change has occurred here. do_chunk_alloc() also needed an update since it calls btrfs_alloc_chunk() which can now return -ENOMEM. Instead of setting space_info->full on any error from btrfs_alloc_chunk() I catch and return every error value _except_ -ENOSPC. Thanks goes to Tsutomu Itoh for pointing that issue out. Signed-off-by: Mark Fasheh <mfasheh@suse.com> 25 July 2011, 21:34:54 UTC
02f8c6a Linus Torvalds 22 July 2011, 02:17:23 UTC Linux 3.0 22 July 2011, 02:17:23 UTC
1f922d0 Linus Torvalds 22 July 2011, 00:20:57 UTC Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: sparc,kgdbts: fix compile regression with kgdb test suite 22 July 2011, 00:20:57 UTC
33d8881 Jason Wessel 19 July 2011, 20:43:16 UTC sparc,kgdbts: fix compile regression with kgdb test suite Commit 63ab25ebbc (kgdbts: unify/generalize gdb breakpoint adjustment) introduced a compile regression on sparc. kgdbts.c: In function 'check_and_rewind_pc': kgdbts.c:307: error: implicit declaration of function 'instruction_pointer_set' Simply add the correct macro definition for instruction pointer on the Sparc architecture. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: David S. Miller <davem@davemloft.net> 21 July 2011, 22:29:49 UTC
2bafc7a Linus Torvalds 21 July 2011, 21:28:01 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: CIFS: Fix wrong length in cifs_iovec_read 21 July 2011, 21:28:01 UTC
57a6fa9 Linus Torvalds 21 July 2011, 19:25:39 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Make Dell Latitude E6420 use reboot=pci x86: Make Dell Latitude E5420 use reboot=pci 21 July 2011, 19:25:39 UTC
a536877 H. Peter Anvin 21 July 2011, 18:22:21 UTC x86: Make Dell Latitude E6420 use reboot=pci Yet another variant of the Dell Latitude series which requires reboot=pci. From the E5420 bug report by Daniel J Blueman: > The E6420 is affected also (same platform, different casing and > features), which provides an external confirmation of the issue; I can > submit a patch for that later or include it if you prefer: > http://linux.koolsolutions.com/2009/08/04/howto-fix-linux-hangfreeze-during-reboots-and-restarts/ Reported-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: <stable@kernel.org> 21 July 2011, 18:47:17 UTC
b7798d2 Daniel J Blueman 13 May 2011, 01:04:59 UTC x86: Make Dell Latitude E5420 use reboot=pci Rebooting on the Dell E5420 often hangs with the keyboard or ACPI methods, but is reliable via the PCI method. [ hpa: this was deferred because we believed for a long time that the recent reshuffling of the boot priorities in commit 660e34cebf0a11d54f2d5dd8838607452355f321 fixed this platform. Unfortunately that turned out to be incorrect. ] Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Link: http://lkml.kernel.org/r/1305248699-2347-1-git-send-email-daniel.blueman@gmail.com Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: <stable@kernel.org> 21 July 2011, 18:45:49 UTC
ad21b11 Linus Torvalds 21 July 2011, 18:07:18 UTC Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915: Fix unfenced alignment on pre-G33 hardware drm/i915: Add quirk to disable SSC on Lenovo U160 LVDS 21 July 2011, 18:07:18 UTC
b91da88 Linus Torvalds 21 July 2011, 18:01:42 UTC vfs: drop conditional inode prefetch in __do_lookup_rcu It seems to hurt performance in real life. Yes, the inode will be used later, but the conditional doesn't seem to predict all that well (negative dentries are not uncommon) and it looks like the cost of prefetching is simply higher than depending on the cache doing the right thing. As usual. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 July 2011, 18:01:42 UTC
b307d46 Jan Beulich 21 July 2011, 14:02:43 UTC FS-Cache: Fix __fscache_uncache_all_inode_pages()'s outer loop The compiler, at least for ix86 and m68k, validly warns that the comparison: next <= (loff_t)-1 is always true (and it's always true also for x86-64 and probably all other arches - as long as pgoff_t isn't wider than loff_t). The intention appears to be to avoid wrapping of "next", so rather than eliminating the pointless comparison, fix the loop to indeed get exited when "next" would otherwise wrap. On m68k the following warning is observed: fs/fscache/page.c: In function '__fscache_uncache_all_inode_pages': fs/fscache/page.c:979: warning: comparison is always false due to limited range of data type Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Suresh Jayaraman <sjayaraman@suse.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 July 2011, 17:59:16 UTC
2cebaa5 Pavel Shilovsky 20 July 2011, 14:24:09 UTC CIFS: Fix wrong length in cifs_iovec_read Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> 21 July 2011, 00:48:05 UTC
cf6ace1 Linus Torvalds 20 July 2011, 22:56:25 UTC Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: signal: align __lock_task_sighand() irq disabling and RCU softirq,rcu: Inform RCU of irq_exit() activity sched: Add irq_{enter,exit}() to scheduler_ipi() rcu: protect __rcu_read_unlock() against scheduler-using irq handlers rcu: Streamline code produced by __rcu_read_unlock() rcu: Fix RCU_BOOST race handling current->rcu_read_unlock_special rcu: decrease rcu_report_exp_rnp coupling with scheduler 20 July 2011, 22:56:25 UTC
acc11ea Linus Torvalds 20 July 2011, 22:55:48 UTC Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Avoid creating superfluous NUMA domains on non-NUMA systems sched: Allow for overlapping sched_domain spans sched: Break out cpu_power from the sched_group structure 20 July 2011, 22:55:48 UTC
919d25a Linus Torvalds 20 July 2011, 22:33:59 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86. reboot: Make Dell Latitude E6320 use reboot=pci x86, doc only: Correct real-mode kernel header offset for init_size x86: Disable AMD_NUMA for 32bit for now 20 July 2011, 22:33:59 UTC
d1e9ae4 Ingo Molnar 20 July 2011, 18:59:26 UTC Merge branch 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu into core/urgent 20 July 2011, 18:59:26 UTC
a841796 Paul E. McKenney 19 July 2011, 10:25:36 UTC signal: align __lock_task_sighand() irq disabling and RCU The __lock_task_sighand() function calls rcu_read_lock() with interrupts and preemption enabled, but later calls rcu_read_unlock() with interrupts disabled. It is therefore possible that this RCU read-side critical section will be preempted and later RCU priority boosted, which means that rcu_read_unlock() will call rt_mutex_unlock() in order to deboost itself, but with interrupts disabled. This results in lockdep splats, so this commit nests the RCU read-side critical section within the interrupt-disabled region of code. This prevents the RCU read-side critical section from being preempted, and thus prevents the attempt to deboost with interrupts disabled. It is quite possible that a better long-term fix is to make rt_mutex_unlock() disable irqs when acquiring the rt_mutex structure's ->wait_lock. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> 20 July 2011, 18:04:54 UTC
ec433f0 Peter Zijlstra 19 July 2011, 22:32:00 UTC softirq,rcu: Inform RCU of irq_exit() activity The rcu_read_unlock_special() function relies on in_irq() to exclude scheduler activity from interrupt level. This fails because exit_irq() can invoke the scheduler after clearing the preempt_count() bits that in_irq() uses to determine that it is at interrupt level. This situation can result in failures as follows: $task IRQ SoftIRQ rcu_read_lock() /* do stuff */ <preempt> |= UNLOCK_BLOCKED rcu_read_unlock() --t->rcu_read_lock_nesting irq_enter(); /* do stuff, don't use RCU */ irq_exit(); sub_preempt_count(IRQ_EXIT_OFFSET); invoke_softirq() ttwu(); spin_lock_irq(&pi->lock) rcu_read_lock(); /* do stuff */ rcu_read_unlock(); rcu_read_unlock_special() rcu_report_exp_rnp() ttwu() spin_lock_irq(&pi->lock) /* deadlock */ rcu_read_unlock_special(t); Ed can simply trigger this 'easy' because invoke_softirq() immediately does a ttwu() of ksoftirqd/# instead of doing the in-place softirq stuff first, but even without that the above happens. Cure this by also excluding softirqs from the rcu_read_unlock_special() handler and ensuring the force_irqthreads ksoftirqd/# wakeup is done from full softirq context. [ Alternatively, delaying the ->rcu_read_lock_nesting decrement until after the special handling would make the thing more robust in the face of interrupts as well. And there is a separate patch for that. ] Cc: Thomas Gleixner <tglx@linutronix.de> Reported-and-tested-by: Ed Tomlinson <edt@aei.ca> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> 20 July 2011, 17:50:12 UTC
c5d753a Peter Zijlstra 19 July 2011, 22:07:25 UTC sched: Add irq_{enter,exit}() to scheduler_ipi() Ensure scheduler_ipi() calls irq_{enter,exit} when it does some actual work. Traditionally we never did any actual work from the resched IPI and all magic happened in the return from interrupt path. Now that we do do some work, we need to ensure irq_{enter,exit} are called so that we don't confuse things. This affects things like timekeeping, NO_HZ and RCU, basically everything with a hook in irq_enter/exit. Explicit examples of things going wrong are: sched_clock_cpu() -- has a callback when leaving NO_HZ state to take a new reading from GTOD and TSC. Without this callback, time is stuck in the past. RCU -- needs in_irq() to work in order to avoid some nasty deadlocks Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> 20 July 2011, 17:50:11 UTC
10f39bb Paul E. McKenney 18 July 2011, 04:14:35 UTC rcu: protect __rcu_read_unlock() against scheduler-using irq handlers The addition of RCU read-side critical sections within runqueue and priority-inheritance lock critical sections introduced some deadlock cycles, for example, involving interrupts from __rcu_read_unlock() where the interrupt handlers call wake_up(). This situation can cause the instance of __rcu_read_unlock() invoked from interrupt to do some of the processing that would otherwise have been carried out by the task-level instance of __rcu_read_unlock(). When the interrupt-level instance of __rcu_read_unlock() is called with a scheduler lock held from interrupt-entry/exit situations where in_irq() returns false, deadlock can result. This commit resolves these deadlocks by using negative values of the per-task ->rcu_read_lock_nesting counter to indicate that an instance of __rcu_read_unlock() is in flight, which in turn prevents instances from interrupt handlers from doing any special processing. This patch is inspired by Steven Rostedt's earlier patch that similarly made __rcu_read_unlock() guard against interrupt-mediated recursion (see https://lkml.org/lkml/2011/7/15/326), but this commit refines Steven's approach to avoid the need for preemption disabling on the __rcu_read_unlock() fastpath and to also avoid the need for manipulating a separate per-CPU variable. This patch avoids need for preempt_disable() by instead using negative values of the per-task ->rcu_read_lock_nesting counter. Note that nested rcu_read_lock()/rcu_read_unlock() pairs are still permitted, but they will never see ->rcu_read_lock_nesting go to zero, and will therefore never invoke rcu_read_unlock_special(), thus preventing them from seeing the RCU_READ_UNLOCK_BLOCKED bit should it be set in ->rcu_read_unlock_special. This patch also adds a check for ->rcu_read_unlock_special being negative in rcu_check_callbacks(), thus preventing the RCU_READ_UNLOCK_NEED_QS bit from being set should a scheduling-clock interrupt occur while __rcu_read_unlock() is exiting from an outermost RCU read-side critical section. Of course, __rcu_read_unlock() can be preempted during the time that ->rcu_read_lock_nesting is negative. This could result in the setting of the RCU_READ_UNLOCK_BLOCKED bit after __rcu_read_unlock() checks it, and would also result it this task being queued on the corresponding rcu_node structure's blkd_tasks list. Therefore, some later RCU read-side critical section would enter rcu_read_unlock_special() to clean up -- which could result in deadlock if that critical section happened to be in the scheduler where the runqueue or priority-inheritance locks were held. This situation is dealt with by making rcu_preempt_note_context_switch() check for negative ->rcu_read_lock_nesting, thus refraining from queuing the task (and from setting RCU_READ_UNLOCK_BLOCKED) if we are already exiting from the outermost RCU read-side critical section (in other words, we really are no longer actually in that RCU read-side critical section). In addition, rcu_preempt_note_context_switch() invokes rcu_read_unlock_special() to carry out the cleanup in this case, which clears out the ->rcu_read_unlock_special bits and dequeues the task (if necessary), in turn avoiding needless delay of the current RCU grace period and needless RCU priority boosting. It is still illegal to call rcu_read_unlock() while holding a scheduler lock if the prior RCU read-side critical section has ever had either preemption or irqs enabled. However, the common use case is legal, namely where then entire RCU read-side critical section executes with irqs disabled, for example, when the scheduler lock is held across the entire lifetime of the RCU read-side critical section. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> 20 July 2011, 17:50:11 UTC
d110235 Peter Zijlstra 20 July 2011, 16:42:57 UTC sched: Avoid creating superfluous NUMA domains on non-NUMA systems When creating sched_domains, stop when we've covered the entire target span instead of continuing to create domains, only to later find they're redundant and throw them away again. This avoids single node systems from touching funny NUMA sched_domain creation code and reduces the risks of the new SD_OVERLAP code. Requested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Anton Blanchard <anton@samba.org> Cc: mahesh@linux.vnet.ibm.com Cc: benh@kernel.crashing.org Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1311180177.29152.57.camel@twins Signed-off-by: Ingo Molnar <mingo@elte.hu> 20 July 2011, 16:54:33 UTC
e3589f6 Peter Zijlstra 15 July 2011, 08:35:52 UTC sched: Allow for overlapping sched_domain spans Allow for sched_domain spans that overlap by giving such domains their own sched_group list instead of sharing the sched_groups amongst each-other. This is needed for machines with more than 16 nodes, because sched_domain_node_span() will generate a node mask from the 16 nearest nodes without regard if these masks have any overlap. Currently sched_domains have a sched_group that maps to their child sched_domain span, and since there is no overlap we share the sched_group between the sched_domains of the various CPUs. If however there is overlap, we would need to link the sched_group list in different ways for each cpu, and hence sharing isn't possible. In order to solve this, allocate private sched_groups for each CPU's sched_domain but have the sched_groups share a sched_group_power structure such that we can uniquely track the power. Reported-and-tested-by: Anton Blanchard <anton@samba.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-08bxqw9wis3qti9u5inifh3y@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu> 20 July 2011, 16:32:41 UTC
9c3f75c Peter Zijlstra 14 July 2011, 11:00:06 UTC sched: Break out cpu_power from the sched_group structure In order to prepare for non-unique sched_groups per domain, we need to carry the cpu_power elsewhere, so put a level of indirection in. Reported-and-tested-by: Anton Blanchard <anton@samba.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-qkho2byuhe4482fuknss40ad@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu> 20 July 2011, 16:32:40 UTC
e6625fa Linus Torvalds 20 July 2011, 05:10:28 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: fix file mode calculation 20 July 2011, 05:10:28 UTC
47126d8 Linus Torvalds 20 July 2011, 05:10:05 UTC Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: davinci: DM365 EVM: fix video input mux bits ARM: davinci: Check for NULL return from irq_alloc_generic_chip arm: davinci: Fix low level gpio irq handlers' argument 20 July 2011, 05:10:05 UTC
4746efd Shaohua Li 19 July 2011, 15:49:26 UTC vmscan: fix a livelock in kswapd I'm running a workload which triggers a lot of swap in a machine with 4 nodes. After I kill the workload, I found a kswapd livelock. Sometimes kswapd3 or kswapd2 are keeping running and I can't access filesystem, but most memory is free. This looks like a regression since commit 08951e545918c159 ("mm: vmscan: correct check for kswapd sleeping in sleeping_prematurely"). Node 2 and 3 have only ZONE_NORMAL, but balance_pgdat() will return 0 for classzone_idx. The reason is end_zone in balance_pgdat() is 0 by default, if all zones have watermark ok, end_zone will keep 0. Later sleeping_prematurely() always returns true. Because this is an order 3 wakeup, and if classzone_idx is 0, both balanced_pages and present_pages in pgdat_balanced() are 0. We add a special case here. If a zone has no page, we think it's balanced. This fixes the livelock. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 20 July 2011, 05:09:31 UTC
f7b8863 Akinobu Mita 19 July 2011, 15:49:25 UTC fs/libfs.c: fix simple_attr_write() on 32bit machines Assume that /sys/kernel/debug/dummy64 is debugfs file created by debugfs_create_x64(). # cd /sys/kernel/debug # echo 0x1234567812345678 > dummy64 # cat dummy64 0x0000000012345678 # echo 0x80000000 > dummy64 # cat dummy64 0xffffffff80000000 A value larger than INT_MAX cannot be written to the debugfs file created by debugfs_create_u64 or debugfs_create_x64 on 32bit machine. Because simple_attr_write() uses simple_strtol() for the conversion. To fix this, use simple_strtoll() instead. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 20 July 2011, 05:09:30 UTC
e501f29 Linus Torvalds 20 July 2011, 04:50:21 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: vfs: fix race in rcu lookup of pruned dentry Fix cifs_get_root() [ Edited the last commit to get rid of a 'unused variable "seq"' warning due to Al editing the patch. - Linus ] 20 July 2011, 04:50:21 UTC
5943026 Linus Torvalds 18 July 2011, 22:43:29 UTC vfs: fix race in rcu lookup of pruned dentry Don't update *inode in __follow_mount_rcu() until we'd verified that there is mountpoint there. Kudos to Hugh Dickins for catching that one in the first place and eventually figuring out the solution (and catching a braino in the earlier version of patch). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 20 July 2011, 04:49:01 UTC
be0e1e2 Paul E. McKenney 21 May 2011, 12:57:18 UTC rcu: Streamline code produced by __rcu_read_unlock() Given some common flag combinations, particularly -Os, gcc will inline rcu_read_unlock_special() despite its being in an unlikely() clause. Use noinline to prohibit this misoptimization. In addition, move the second barrier() in __rcu_read_unlock() so that it is not on the common-case code path. This will allow the compiler to generate better code for the common-case path through __rcu_read_unlock(). Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> 20 July 2011, 04:38:53 UTC
7765be2 Paul E. McKenney 14 July 2011, 19:24:11 UTC rcu: Fix RCU_BOOST race handling current->rcu_read_unlock_special The RCU_BOOST commits for TREE_PREEMPT_RCU introduced an other-task write to a new RCU_READ_UNLOCK_BOOSTED bit in the task_struct structure's ->rcu_read_unlock_special field, but, as noted by Steven Rostedt, without correctly synchronizing all accesses to ->rcu_read_unlock_special. This could result in bits in ->rcu_read_unlock_special being spuriously set and cleared due to conflicting accesses, which in turn could result in deadlocks between the rcu_node structure's ->lock and the scheduler's rq and pi locks. These deadlocks would result from RCU incorrectly believing that the just-ended RCU read-side critical section had been preempted and/or boosted. If that RCU read-side critical section was executed with either rq or pi locks held, RCU's ensuing (incorrect) calls to the scheduler would cause the scheduler to attempt to once again acquire the rq and pi locks, resulting in deadlock. More complex deadlock cycles are also possible, involving multiple rq and pi locks as well as locks from multiple rcu_node structures. This commit fixes synchronization by creating ->rcu_boosted field in task_struct that is accessed and modified only when holding the ->lock in the rcu_node structure on which the task is queued (on that rcu_node structure's ->blkd_tasks list). This results in tasks accessing only their own current->rcu_read_unlock_special fields, making unsynchronized access once again legal, and keeping the rcu_read_unlock() fastpath free of atomic instructions and memory barriers. The reason that the rcu_read_unlock() fastpath does not need to access the new current->rcu_boosted field is that this new field cannot be non-zero unless the RCU_READ_UNLOCK_BLOCKED bit is set in the current->rcu_read_unlock_special field. Therefore, rcu_read_unlock() need only test current->rcu_read_unlock_special: if that is zero, then current->rcu_boosted must also be zero. This bug does not affect TINY_PREEMPT_RCU because this implementation of RCU accesses current->rcu_read_unlock_special with irqs disabled, thus preventing races on the !SMP systems that TINY_PREEMPT_RCU runs on. Maybe-reported-by: Dave Jones <davej@redhat.com> Maybe-reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> 20 July 2011, 04:38:52 UTC
131906b Paul E. McKenney 17 July 2011, 09:05:49 UTC rcu: decrease rcu_report_exp_rnp coupling with scheduler PREEMPT_RCU read-side critical sections blocking an expedited grace period invoke rcu_report_exp_rnp(). When the last such critical section has completed, rcu_report_exp_rnp() invokes the scheduler to wake up the task that invoked synchronize_rcu_expedited() -- needlessly holding the root rcu_node structure's lock while doing so, thus needlessly providing a way for RCU and the scheduler to deadlock. This commit therefore releases the root rcu_node structure's lock before calling wake_up(). Reported-by: Ed Tomlinson <edt@aei.ca> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> 20 July 2011, 04:38:51 UTC
38be7a7 Sage Weil 19 July 2011, 18:25:04 UTC ceph: fix file mode calculation open(2) must always include one of O_RDONLY, O_WRONLY, or O_RDWR. No need for any O_APPEND special case. Passing O_WRONLY|O_RDWR is undefined according to the man page, but the Linux VFS interprets this as O_RDWR, so we'll do the same. This fixes open(2) with flags O_RDWR|O_APPEND, which was incorrectly being translated to readonly. Reported-by: Fyodor Ustinov <ufm@ufm.su> Signed-off-by: Sage Weil <sage@newdream.net> 19 July 2011, 18:25:04 UTC
9daedd8 Jon Povey 19 July 2011, 03:30:11 UTC davinci: DM365 EVM: fix video input mux bits Video input mux settings for tvp7002 and imager inputs were swapped. Comment was correct. Tested on EVM with tvp7002 input. Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Acked-by: Manjunath Hadli <manjunath.hadli@ti.com> Cc: stable@kernel.org Signed-off-by: Sekhar Nori <nsekhar@ti.com> 19 July 2011, 08:30:29 UTC
33e1e5e Todd Poynor 17 July 2011, 05:39:35 UTC ARM: davinci: Check for NULL return from irq_alloc_generic_chip Avoid NULL dereference of irq_alloc_generic_chip return in low memory conditions. Signed-off-by: Todd Poynor <toddpoynor@google.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> 19 July 2011, 07:19:00 UTC
e28f871 Chris Wilson 18 July 2011, 20:11:49 UTC drm/i915: Fix unfenced alignment on pre-G33 hardware Align unfenced buffers on older hardware to the power-of-two object size. The docs suggest that it should be possible to align only to a power-of-two tile height, but using the already computed fence size is easier and always correct. We also have to make sure that we unbind misaligned buffers upon tiling changes. In order to prevent a repetition of this bug, we change the interface to the alignment computation routines to force the caller to provide the requested alignment and size of the GTT binding rather than assume the current values on the object. Reported-and-tested-by: Sitosfe Wheeler <sitsofe@yahoo.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36326 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Keith Packard <keithp@keithp.com> 18 July 2011, 21:02:06 UTC
3a5c374 Linus Torvalds 18 July 2011, 20:29:26 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: pppoe: Must flush connections when MAC address changes too. include/linux/sdla.h: remove the prototype of sdla() tulip: dmfe: Remove old log spamming pr_debugs 18 July 2011, 20:29:26 UTC
680ba7c David S. Miller 18 July 2011, 18:48:28 UTC pppoe: Must flush connections when MAC address changes too. Kernel bugzilla: 39252 Signed-off-by: David S. Miller <davem@davemloft.net> 18 July 2011, 18:48:28 UTC
a07c796 WANG Cong 16 July 2011, 22:22:20 UTC include/linux/sdla.h: remove the prototype of sdla() `make headers_check` complains that linux-2.6/usr/include/linux/sdla.h:116: userspace cannot reference function or variable defined in the kernel this is due to that there is no such a kernel function, void sdla(void *cfg_info, char *dev, struct frad_conf *conf, int quiet); I don't know why we have it in a kernel header, so remove it. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 July 2011, 18:06:03 UTC
fec11dd Al Viro 18 July 2011, 17:50:40 UTC Fix cifs_get_root() Add missing ->i_mutex, convert to lookup_one_len() instead of (broken) open-coded analog, cope with getting something like a//b as relative pathname. Simplify the hell out of it, while we are there... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Jeff Layton <jlayton@redhat.com> 18 July 2011, 17:51:58 UTC
0b8f627 Joe Perches 18 July 2011, 17:44:44 UTC tulip: dmfe: Remove old log spamming pr_debugs Commit 726b65ad444d ("tulip: Convert uses of KERN_DEBUG") enabled some old previously inactive uses of pr_debug converted by commit dde7c8ef1679 ("tulip/dmfe.c: Use dev_<level> and pr_<level>"). Remove these pr_debugs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 July 2011, 17:44:44 UTC
dc6b845 Mauro Carvalho Chehab 17 July 2011, 03:24:37 UTC si4713-i2c: avoid potential buffer overflow on si4713 While compiling it with Fedora 15, I noticed this issue: inlined from ‘si4713_write_econtrol_string’ at drivers/media/radio/si4713-i2c.c:1065:24: arch/x86/include/asm/uaccess_32.h:211:26: error: call to ‘copy_from_user_overflow’ declared with attribute error: copy_from_user() buffer size is not provably correct Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Eugene Teo <eugeneteo@kernel.sg> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 July 2011, 16:12:21 UTC
524196d Linus Torvalds 18 July 2011, 16:05:59 UTC Merge branch 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: Correct WM8994 MICBIAS supply widget hookup ASoC: Fix shift in WM8958 accessory detection default implementation ASoC: sh: fsi-hdmi: fixup snd_soc_card name ASoC: sh: fsi-da7210: fixup snd_soc_card name ASoC: sh: fsi-ak4642: fixup snd_soc_card name 18 July 2011, 16:05:59 UTC
d36c301 Linus Torvalds 18 July 2011, 16:03:15 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: hppfs_lookup(): don't open-code lookup_one_len() hppfs: fix dentry leak cramfs: get_cramfs_inode() returns ERR_PTR() on failure ufs should use d_splice_alias() fix exofs ->get_parent() ceph analog of cifs build_path_from_dentry() race fix cifs: build_path_from_dentry() race fix 18 July 2011, 16:03:15 UTC
a406721 Linus Torvalds 18 July 2011, 16:02:58 UTC Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (max1111) Fix race condition causing NULL pointer exception hwmon: (it87) Fix label group removal hwmon: (asus_atk0110) Fix memory leak 18 July 2011, 16:02:58 UTC
0916a5e Al Viro 18 July 2011, 02:27:22 UTC hppfs_lookup(): don't open-code lookup_one_len() ... and it's getting it wrong, too - missing ->d_revalidate() calls when it's dealing with filesystem (procfs) that has non-trivial ->d_revalidate()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 18 July 2011, 03:22:48 UTC
back to top