Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
5945b28 Arnaud Ebalard 10 December 2014, 23:54:02 UTC drivers/rtc/rtc-isl12057.c: fix masking of register values When Intersil ISL12057 support was added by commit 70e123373c05 ("rtc: Add support for Intersil ISL12057 I2C RTC chip"), two masks for time registers values imported from the device were either wrong or omitted, leading to additional bits from those registers to impact read values: - mask for hour register value when reading it in AM/PM mode. As AM/PM mode is not the usual mode used by the driver, this error would only have an impact on an externally configured RTC hour later read by the driver. - mask for month value. The lack of masking would provide an erroneous value if century bit is set. This patch fixes those two masks. Fixes: 70e123373c05 ("rtc: Add support for Intersil ISL12057 I2C RTC chip") Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:15 UTC
dd01a1c Tomas Novotny 10 December 2014, 23:53:59 UTC of: add vendor prefix for Pericom Technology Signed-off-by: Tomas Novotny <tomas@novotny.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:15 UTC
f4199f8 Tomas Novotny 10 December 2014, 23:53:57 UTC rtc: ds1307: add support for mcp7940x chips MCP7940x is same RTC as MCP7941x. The difference is that MCP7941x chips contain additional EEPROM on a different i2c address. DS1307 driver already supports MCP7941x, so just add a new i2c device id and rename functions and defines accordingly. Signed-off-by: Tomas Novotny <tomas@novotny.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:15 UTC
920f91e Søren Andersen 10 December 2014, 23:53:54 UTC drivers/rtc/rtc-ds1374.c: add watchdog support Add support for the watchdog functionality of the DS1374 rtc. Based on the m41t80 watchdog functionality Note: watchdog uses the same registers as alarm. [akpm@linux-foundation.org: don't forget mutex_unlock() in ds1374_wdt_open() error path] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Soeren Andersen <san@rosetechnology.dk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:15 UTC
e9bc736 Barry Song 10 December 2014, 23:53:51 UTC drivers/rtc/rtc-sirfsoc.c: replace local_irq_disable by spin_lock_irq for SMP safety Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: hao liu <hao.liu@csr.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:15 UTC
09e427f hao liu 10 December 2014, 23:53:49 UTC drivers/rtc/rtc-sirfsoc.c: add alarm_irq_enable support Add missed alarm_irq_enable() callback for CSR SiRFSoC RTCs. [akpm@linux-foundation.org: remove unneeded cast] Signed-off-by: hao liu <hao.liu@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:15 UTC
a45d528 Jan Kardell 10 December 2014, 23:53:46 UTC rtc: pcf8563: clear expired alarm at boot time In case the card is woken up of the rtc alarm, the devm_rtc_device_register function detects it as a pending alarm about a month in the future. Fix this by clearing the alarm in module probe. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:15 UTC
ff0bc50 Jan Kardell 10 December 2014, 23:53:43 UTC rtc: pcf8563: save battery power According to Haoyu hym8563 datasheet this saves som power. Might be importat to battery life. And maybe it works for the NXP part as well. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:15 UTC
599cda5 Jan Kardell 10 December 2014, 23:53:40 UTC rtc: pcf8563: handle consequeces of lacking second alarm reg To guarantee that a set alarm occurs in the future, the set alarm time is rounded up to the nearest minute. Also we cannot handle UIE as it requires second precision. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:15 UTC
c7aef4f Jan Kardell 10 December 2014, 23:53:37 UTC rtc: pcf8563: fix wrong time from read_alarm Incorrect mask was used for hour and monthday fields. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:15 UTC
45ef045 Jan Kardell 10 December 2014, 23:53:34 UTC rtc: pcf8563: fix write of invalid bits to ST2 reg The NXP datasheet says: "Bits labeled as N should always be written with logic 0." At least one of those bits is sometime read as a 1, therfore violating this rule. To fix this we mask away those bits. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:15 UTC
17a1e5e Jan Kardell 10 December 2014, 23:53:31 UTC rtc: pcf8563: remove leftover code Remove some code that was left from before block read/write was used. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:14 UTC
672e2b1 Johan Hovold 10 December 2014, 23:53:29 UTC ARM: dts: am335x-boneblack: enable power off and rtc wake up Configure the RTC as system-power controller, which allows the system to be powered off as well as woken up again on subsequent RTC alarms. Note that the PMIC needs to be put in SLEEP (rather than OFF) mode to maintain RTC power. Specifically, this means that the PMIC ti,pmic-shutdown-controller property must be left unset in order to be able to wake up on RTC alarms. Tested on BeagleBone Black (rev A5). Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:14 UTC
6ac7b4a Johan Hovold 10 December 2014, 23:53:25 UTC ARM: dts: am33xx: update rtc-node compatible property Enable am33xx specific RTC features (e.g. PMIC control) by adding "ti,am3352-rtc" to the compatible property of the rtc node. Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:14 UTC
0125138 Johan Hovold 10 December 2014, 23:53:22 UTC rtc: omap: add copyright entry Add myself to the list of copyright holders. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:14 UTC
10211ae Johan Hovold 10 December 2014, 23:53:19 UTC rtc: omap: fix minor coding style issues Fix minor coding style issues like comment style, indentation and remove a few unnecessary casts. Also drop the 1 from OMAP1 in the driver description. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:14 UTC
8ad5c72 Johan Hovold 10 December 2014, 23:53:16 UTC rtc: omap: enable wake-up from power off The ALARM interrupt must not be disabled during shutdown in order to be able to power up the system using an RTC alarm. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:14 UTC
222a12f Johan Hovold 10 December 2014, 23:53:13 UTC rtc: omap: add support for pmic_power_en Add new property "ti,system-power-controller" to register the RTC as a power-off handler. Some RTC IP revisions can control an external PMIC via the pmic_power_en pin, which can be configured to transition to OFF on ALARM2 events and back to ON on subsequent ALARM (wakealarm) events. This is based on earlier work by Colin Foe-Parker and AnilKumar Ch. [1] [1] https://www.mail-archive.com/linux-omap@vger.kernel.org/msg82127.html [akpm@linux-foundation.org: add comment] Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Colin Foe-Parker <colin.foeparker@logicpd.com> Cc: AnilKumar Ch <anilkumar@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:14 UTC
c253a89 Johan Hovold 10 December 2014, 23:53:10 UTC rtc: omap: add helper to read 32-bit registers Add helper to read full register width. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:14 UTC
cbbe326 Johan Hovold 10 December 2014, 23:53:07 UTC rtc: omap: add helper to read raw bcd time Add helper to read raw BCD time that can be used in interrupt context. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:14 UTC
9291e34 Johan Hovold 10 December 2014, 23:53:04 UTC rtc: omap: silence bogus power-up reset message at probe Some legacy RTC IP revisions has a power-up reset flag in the status register that later revisions lack. As this flag is always read back as set on later revisions (or is overloaded with a different flag), make sure to only clear the flag and print the info message on legacy platforms. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:14 UTC
2153f94 Johan Hovold 10 December 2014, 23:53:01 UTC rtc: omap: add structured device-type info Add structured device-type info to encode IP-block revision differences. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:14 UTC
a430ca2 Johan Hovold 10 December 2014, 23:52:58 UTC rtc: omap: remove DRIVER_NAME macro Remove DRIVER_NAME macro which was used for unrelated strings (e.g. id-table entry and module name), but not for related ones (e.g. module name and alias). Also move the module alias to the other module-info entries. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:14 UTC
55ba953 Johan Hovold 10 December 2014, 23:52:55 UTC rtc: omap: add device abstraction Add struct omap_rtc to hold previously global data as well as the IP-block feature flags. Also convert the register-access macros to proper inline helper functions. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:13 UTC
d17a82e Johan Hovold 10 December 2014, 23:52:52 UTC rtc: omap: make platform-device id table const Make platform-device id table const. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:13 UTC
397b630 Johan Hovold 10 December 2014, 23:52:49 UTC rtc: omap: use dev_info Use dev_info rather than pr_info. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:13 UTC
8777340 Johan Hovold 10 December 2014, 23:52:46 UTC rtc: omap: remove unused register-base define Remove register-base define, which is no longer used. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:13 UTC
4390ce0 Johan Hovold 10 December 2014, 23:52:43 UTC rtc: omap: fix class-device registration Make sure not to register the class device until after the device has been configured. Currently, the device is not fully configured (e.g. 24-hour mode) when the class device is registered, something which involves driver callbacks for example to read the current time. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:13 UTC
437b37a Johan Hovold 10 December 2014, 23:52:40 UTC rtc: omap: clean up probe error handling Remove some debug messages and return errors from subsystems rather than always fail with -EIO. Note that the class-registration error has already been logged by rtc core. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:13 UTC
1ed8b5d Johan Hovold 10 December 2014, 23:52:36 UTC rtc: omap: fix interrupt disable at probe Use writel instead of writeb when disabling interrupts at probe as ALARM2 is not cleared otherwise on some IP-block revisions (e.g. AM3352). Note that the driver currently never enables the ALARM2 interrupt. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:13 UTC
7ecd9a3 Johan Hovold 10 December 2014, 23:52:33 UTC rtc: omap: fix missing wakealarm attribute The platform device must be registered as wakeup capable before registering the class device, or the wakealarm attribute will not be created. Also make sure to unregister the wakeup source on probe errors. Fixes: 1d2e2b65d098 ("rtc: omap: restore back (hard-code) wakeup support") Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:13 UTC
44c63a5 Johan Hovold 10 December 2014, 23:52:30 UTC rtc: omap: fix clock-source configuration This series fixes a few issues with the omap rtc-driver, cleans up a bit, adds device abstraction, and finally adds support for the PMIC control feature found in some revisions of this RTC IP block. Ultimately, this allows for powering off the Beaglebone and waking it up again on RTC alarms. This patch (of 20): Make sure not to reset the clock-source configuration when enabling the 32kHz clock mux. Until the clock source can be configured through device tree we must not overwrite settings made by the bootloader (e.g. clock-source selection). Fixes: cd914bba03d8 ("drivers/rtc/rtc-omap.c: add support for enabling 32khz clock") Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:13 UTC
16682c8 Hyogi Gim 10 December 2014, 23:52:27 UTC drivers/rtc/interface.c: check the validation of rtc_time in __rtc_read_time Some rtc devices always return '0' when rtc_class_ops.read_time is called. So if rtc_time isn't verified in callback, rtc interface cannot know whether rtc_time is valid. Check rtc_time by using 'rtc_valid_tm' in '__rtc_read_time'. And add the message for debugging. Signed-off-by: Hyogi Gim <hyogi.gim@lge.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:13 UTC
0e95325 Guo Zeng 10 December 2014, 23:52:24 UTC drivers/rtc/rtc-sirfsoc.c: move hardware initilization earlier in probe Move rtc register to be later than hardware initialization. The reason is that devm_rtc_device_register() will do read_time() which is a callback accessing hardware. This sometimes causes a hang in the hardware related callback. Signed-off-by: Guo Zeng <guo.zeng@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:13 UTC
a682e9c Jan Kara 10 December 2014, 23:52:22 UTC ncpfs: return proper error from NCP_IOC_SETROOT ioctl If some error happens in NCP_IOC_SETROOT ioctl, the appropriate error return value is then (in most cases) just overwritten before we return. This can result in reporting success to userspace although error happened. This bug was introduced by commit 2e54eb96e2c8 ("BKL: Remove BKL from ncpfs"). Propagate the errors correctly. Coverity id: 1226925. Fixes: 2e54eb96e2c80 ("BKL: Remove BKL from ncpfs") Signed-off-by: Jan Kara <jack@suse.cz> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:13 UTC
6ef4536 Andy Lutomirski 10 December 2014, 23:52:19 UTC init: allow CONFIG_INIT_FALLBACK=n to disable defaults if init= fails If a user puts init=/whatever on the command line and /whatever can't be run, then the kernel will try a few default options before giving up. If init=/whatever came from a bootloader prompt, then this is unexpected but probably harmless. On the other hand, if it comes from a script (e.g. a tool like virtme or perhaps a future kselftest script), then the fallbacks are likely to exist, but they'll do the wrong thing. For example, they might unexpectedly invoke systemd. This adds a config option CONFIG_INIT_FALLBACK. If unset, then a failure to run the specified init= process be fatal. The tentative plan is to remove CONFIG_INIT_FALLBACK for 3.20. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Rob Landley <rob@landley.net> Cc: Chuck Ebbert <cebbert.lkml@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:12 UTC
52f5592 Jungseung Lee 10 December 2014, 23:52:16 UTC fs/binfmt_elf.c: fix internal inconsistency relating to vma dump size vma_dump_size() has been used several times on actual dumper and it is supposed to return the same value for the same vma. But vma_dump_size() could return different values for same vma. The known problem case is concurrent shared memory removal. If a vma is used for a shared memory and that shared memory is removed between writing program header and dumping vma memory, this will result in a dump file which is internally consistent. To fix the problem, we set baseline to get dump size and store the size into vma_filesz and always use the same vma dump size which is stored in vma_filsz. The consistnecy with reality is not actually guranteed, but it's tolerable since that is fully consistent with base line. Signed-off-by: Jungseung Lee <js07.lee@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:12 UTC
f7e1ad1 Andrew Morton 10 December 2014, 23:52:13 UTC fs/binfmt_misc.c: use GFP_KERNEL instead of GFP_USER GFP_USER means "honour cpuset nodes-allowed beancounting". These are regular old kernel objects and there seems no reason to give them this treatment. Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:12 UTC
e6084d4 Mike Frysinger 10 December 2014, 23:52:10 UTC binfmt_misc: clean up code style a bit Clean up various coding style issues that checkpatch complains about. No functional changes here. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:12 UTC
6b899c4 Mike Frysinger 10 December 2014, 23:52:08 UTC binfmt_misc: add comments & debug logs When trying to develop a custom format handler, the errors returned all effectively get bucketed as EINVAL with no kernel messages. The other errors (ENOMEM/EFAULT) are internal/obvious and basic. Thus any time a bad handler is rejected, the developer has to walk the dense code and try to guess where it went wrong. Needing to dive into kernel code is itself a fairly high barrier for a lot of people. To improve this situation, let's deploy extensive pr_debug markers at logical parse points, and add comments to the dense parsing logic. It let's you see exactly where the parsing aborts, the string the kernel received (useful when dealing with shell code), how it translated the buffers to binary data, and how it will apply the mask at runtime. Some example output: $ echo ':qemu-foo:M::\x7fELF\xAD\xAD\x01\x00:\xff\xff\xff\xff\xff\x00\xff\x00:/usr/bin/qemu-foo:POC' > register $ dmesg binfmt_misc: register: received 92 bytes binfmt_misc: register: delim: 0x3a {:} binfmt_misc: register: name: {qemu-foo} binfmt_misc: register: type: M (magic) binfmt_misc: register: offset: 0x0 binfmt_misc: register: magic[raw]: 5c 78 37 66 45 4c 46 5c 78 41 44 5c 78 41 44 5c \x7fELF\xAD\xAD\ binfmt_misc: register: magic[raw]: 78 30 31 5c 78 30 30 00 x01\x00. binfmt_misc: register: mask[raw]: 5c 78 66 66 5c 78 66 66 5c 78 66 66 5c 78 66 66 \xff\xff\xff\xff binfmt_misc: register: mask[raw]: 5c 78 66 66 5c 78 30 30 5c 78 66 66 5c 78 30 30 \xff\x00\xff\x00 binfmt_misc: register: mask[raw]: 00 . binfmt_misc: register: magic/mask length: 8 binfmt_misc: register: magic[decoded]: 7f 45 4c 46 ad ad 01 00 .ELF.... binfmt_misc: register: mask[decoded]: ff ff ff ff ff 00 ff 00 ........ binfmt_misc: register: magic[masked]: 7f 45 4c 46 ad 00 01 00 .ELF.... binfmt_misc: register: interpreter: {/usr/bin/qemu-foo} binfmt_misc: register: flag: P (preserve argv0) binfmt_misc: register: flag: O (open binary) binfmt_misc: register: flag: C (preserve creds) The [raw] lines show us exactly what was received from userspace. The lines after that show us how the kernel has decoded things. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:12 UTC
5e4f6ba Joe Perches 10 December 2014, 23:52:05 UTC checkpatch: add ability to --fix (coalesce) string fragments on multiple lines Add --fix option to coalesce string fragments. This does not coalesce string fragments that have newline terminations or are otherwise exempted. Other miscellanea: o move all the string tests together. o fix get_quoted_string function for tab characters o fix concatination typo Signed-off-by: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:12 UTC
b75ac61 Joe Perches 10 December 2014, 23:52:02 UTC checkpatch: add --strict "pointer comparison to NULL" test It seems there are more and more uses of "if (!ptr)" in preference to "if (ptr == NULL)" so add a --strict test to emit a message when using the latter form. This also finds (ptr != NULL). Fix it too if desired. Signed-off-by: Joe Perches <joe@perches.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:12 UTC
90ad30e Joe Perches 10 December 2014, 23:51:59 UTC checkpatch: add test for consecutive string fragments Emit a warning when single line string coalescing occurs. Code that uses compiler string concatenation on a single line like: printk("foo" "bar"); is generally better to read concatenated like: printk("foobar"); Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:12 UTC
0ab9019 Joe Perches 10 December 2014, 23:51:57 UTC checkpatch: add --strict preference for #defines using BIT(foo) Using BIT(foo) and BIT_ULL(bar) is more common now. Suggest using these macros over #defines with 1<<value. Add a --fix option too. Signed-off-by: Joe Perches <joe@perches.com> Cc: David Miller <davem@davemloft.net> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:12 UTC
f512357 Julius Werner 10 December 2014, 23:51:54 UTC checkpatch: allow certain SI units with three characters Checkpatch flags CamelCase identifiers in strict mode, but it has a feature to ignore parts with only two characters to allow for SI units like mV or uA. Unfortunately, not all SI units fit in two characters, and not all are lower case followed by upper case. This patch adds hardcoded detection for frequency and 1024-based size units (Hz/KHz/MHz/GHz/THz and KiB/MiB/GiB/TiB), since allowing any three character combinations might be too lenient. The list can later be expanded as needed. Signed-off-by: Julius Werner <jwerner@chromium.org> Acked-by: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:12 UTC
ea4acbb Joe Perches 10 December 2014, 23:51:51 UTC checkpatch: Add --strict test for function pointer calling style Peter Hurley wrote: The use of older function ptr calling style, (*fn)(), makes static analysis more error-prone; replace with modern fn() style. So make checkpatch emit a --strict test for that condition. Update the unnecessary parentheses test for dereferencing objects at the same time and create a $fix mechanism too. Signed-off-by: Joe Perches <joe@perches.com> Cc: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:12 UTC
e0d975b Joe Perches 10 December 2014, 23:51:49 UTC checkpatch: reduce MAINTAINERS update message frequency When files are being added/moved/deleted and a patch contains an update to the MAINTAINERS file, assume it's to update the MAINTAINERS file correctly and do not emit the "does MAINTAINERS need updating?" message. Reported by many people. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:12 UTC
abb08a5 Joe Perches 10 December 2014, 23:51:46 UTC checkpatch: try to avoid mask and shift errors Shift has a higher precedence that mask so warn when a mask then shift operation is done without parentheses around the mask. This test works well for a right shift, but the left shift is pretty commonly done correctly so only warn on the right shift. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:11 UTC
36061e3 Joe Perches 10 December 2014, 23:51:43 UTC checkpatch: fix use via symlink, make missing spelling file non-fatal Commit 66b47b4a9dad ("checkpatch: look for common misspellings") made it difficult to use checkpatch via a symlink. Fix that and make a missing spelling.txt file non-fatal. Emit a warning when the spelling.txt file can not be opened. Reference: http://xkcd.com/1172/ Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:11 UTC
15160f9 Fabio Estevam 10 December 2014, 23:51:40 UTC checkpatch: improve warning message for "needless if" case Add an 'and' to the sentence so that it looks better: WARNING: debugfs_remove(NULL) is safe and this check is probably not required Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:11 UTC
04941aa Joe Perches 10 December 2014, 23:51:37 UTC checkpatch: improve test for no space after cast sizeof(foo) is not a cast, allow a space after it. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:11 UTC
619a908 Joe Perches 10 December 2014, 23:51:35 UTC checkpatch: add error on use of attribute((weak)) or __weak declarations Using weak declarations can have unintended link defects. The __weak on the declaration causes non-weak definitions to become weak. Emit an error on its use. Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:11 UTC
2381097 Joe Perches 10 December 2014, 23:51:32 UTC checkpatch: add an error test for no space before comma Using code like: int foo , bar; is not preferred to: int foo, bar; so emit an error on this style. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:11 UTC
69c953c Rasmus Villemoes 10 December 2014, 23:51:29 UTC lib/lcm.c: lcm(n,0)=lcm(0,n) is 0, not n Return the mathematically correct answer when an argument is 0. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:11 UTC
74a5fef Rasmus Villemoes 10 December 2014, 23:51:27 UTC lib/lcm.c: ensure correct result whenever it fits Ensure that lcm(a,b) returns the mathematically correct result, provided it fits in an unsigned long. The current version returns garbage if a*b overflows, even if the final result would fit. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:11 UTC
7b212ed Joe Perches 10 December 2014, 23:51:24 UTC MAINTAINERS: update ivtv mailing lists as subscriber-only Mark these as subscriber-only mailing lists. Signed-off-by: Joe Perches <joe@perches.com> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:11 UTC
f099755 Alex Elder 10 December 2014, 23:51:21 UTC printk: drop logbuf_cpu volatile qualifier Pranith Kumar posted a patch in which removed the "volatile" qualifier for the "logbuf_cpu" variable in vprintk_emit(). https://lkml.org/lkml/2014/11/13/894 In his patch, he used ACCESS_ONCE() for all references to that symbol to provide whatever protection was intended. There was some discussion that followed, and in the end Steven Rostedt concluded that not only was "volatile" not needed, neither was it required to use ACCESS_ONCE(). I offered an elaborate description that concluded Steven was right, and Pranith asked me to submit an alternative patch. And this is it. The basic reason "volatile" is not needed is that "logbuf_cpu" has static storage duration, and vprintk_emit() is an exported interface. This means that the value of logbuf_cpu must be read from memory the first time it is used in a particular call of vprintk_emit(). The variable's value is read only once in that function, when it's read it'll be the copy from memory (or cache). In addition, the value of "logbuf_cpu" is only ever written under protection of a spinlock. So the value that is read is the "real" value (and not an out-of-date cached one). If its value is not UINT_MAX, it is the current CPU's processor id, and it will have been last written by the running CPU. Signed-off-by: Alex Elder <elder@linaro.org> Reported-by: Pranith Kumar <bobby.prani@gmail.com> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Petr Mladek <pmladek@suse.cz> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:11 UTC
a39d4a8 Joe Perches 10 December 2014, 23:50:15 UTC printk: add and use LOGLEVEL_<level> defines for KERN_<LEVEL> equivalents Use #defines instead of magic values. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:11 UTC
f80e696 Joe Perches 10 December 2014, 23:59:59 UTC tile: use pr_warn instead of pr_warning Use the more common pr_warn. Coalesce formats, realign arguments. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:11 UTC
4b3ed61 Joe Perches 10 December 2014, 23:59:56 UTC tile: neaten early_printk uses Coalesce the formats and align arguments. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:10 UTC
1dc6244 Joe Perches 10 December 2014, 23:45:53 UTC printk: remove used-once early_vprintk Eliminate the unlikely possibility of message interleaving for early_printk/early_vprintk use. early_vprintk can be done via the %pV extension so remove this unnecessary function and change early_printk to have the equivalent vprintk code. All uses of early_printk already end with a newline so also remove the unnecessary newline from the early_printk function. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:10 UTC
9e3961a Prarit Bhargava 10 December 2014, 23:45:50 UTC kernel: add panic_on_warn There have been several times where I have had to rebuild a kernel to cause a panic when hitting a WARN() in the code in order to get a crash dump from a system. Sometimes this is easy to do, other times (such as in the case of a remote admin) it is not trivial to send new images to the user. A much easier method would be a switch to change the WARN() over to a panic. This makes debugging easier in that I can now test the actual image the WARN() was seen on and I do not have to engage in remote debugging. This patch adds a panic_on_warn kernel parameter and /proc/sys/kernel/panic_on_warn calls panic() in the warn_slowpath_common() path. The function will still print out the location of the warning. An example of the panic_on_warn output: The first line below is from the WARN_ON() to output the WARN_ON()'s location. After that the panic() output is displayed. WARNING: CPU: 30 PID: 11698 at /home/prarit/dummy_module/dummy-module.c:25 init_dummy+0x1f/0x30 [dummy_module]() Kernel panic - not syncing: panic_on_warn set ... CPU: 30 PID: 11698 Comm: insmod Tainted: G W OE 3.17.0+ #57 Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013 0000000000000000 000000008e3f87df ffff88080f093c38 ffffffff81665190 0000000000000000 ffffffff818aea3d ffff88080f093cb8 ffffffff8165e2ec ffffffff00000008 ffff88080f093cc8 ffff88080f093c68 000000008e3f87df Call Trace: [<ffffffff81665190>] dump_stack+0x46/0x58 [<ffffffff8165e2ec>] panic+0xd0/0x204 [<ffffffffa038e05f>] ? init_dummy+0x1f/0x30 [dummy_module] [<ffffffff81076b90>] warn_slowpath_common+0xd0/0xd0 [<ffffffffa038e040>] ? dummy_greetings+0x40/0x40 [dummy_module] [<ffffffff81076c8a>] warn_slowpath_null+0x1a/0x20 [<ffffffffa038e05f>] init_dummy+0x1f/0x30 [dummy_module] [<ffffffff81002144>] do_one_initcall+0xd4/0x210 [<ffffffff811b52c2>] ? __vunmap+0xc2/0x110 [<ffffffff810f8889>] load_module+0x16a9/0x1b30 [<ffffffff810f3d30>] ? store_uevent+0x70/0x70 [<ffffffff810f49b9>] ? copy_module_from_fd.isra.44+0x129/0x180 [<ffffffff810f8ec6>] SyS_finit_module+0xa6/0xd0 [<ffffffff8166cf29>] system_call_fastpath+0x12/0x17 Successfully tested by me. hpa said: There is another very valid use for this: many operators would rather a machine shuts down than being potentially compromised either functionally or security-wise. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Fabian Frederick <fabf@skynet.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:10 UTC
f938612 Yann Droneaud 10 December 2014, 23:45:47 UTC include/linux/file.h: remove get_unused_fd() macro Macro get_unused_fd() is used to allocate a file descriptor with default flags. Those default flags (0) don't enable close-on-exec. This can be seen as an unsafe default: in most case close-on-exec should be enabled to not leak file descriptor across exec(). It would be better to have a "safer" default set of flags, eg. O_CLOEXEC must be used to enable close-on-exec. Instead this patch removes get_unused_fd() so that out of tree modules won't be affect by a runtime behavor change which might introduce other kind of bugs: it's better to catch the change at build time, making it easier to fix. Removing the macro will also promote use of get_unused_fd_flags() (or anon_inode_getfd()) with flags provided by userspace. Or, if flags cannot be given by userspace, with flags set to O_CLOEXEC by default. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:10 UTC
8d10a03 Yann Droneaud 10 December 2014, 23:45:44 UTC fs/file.c: replace get_unused_fd() with get_unused_fd_flags(0) This patch replaces calls to get_unused_fd() with equivalent call to get_unused_fd_flags(0) to preserve current behavor for existing code. In a further patch, get_unused_fd() will be removed so that new code start using get_unused_fd_flags(), with the hope O_CLOEXEC could be used, either by default or choosen by userspace. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:10 UTC
c6cb898 Yann Droneaud 10 December 2014, 23:45:42 UTC binfmt_misc: replace get_unused_fd() with get_unused_fd_flags(0) This patch replaces calls to get_unused_fd() with equivalent call to get_unused_fd_flags(0) to preserve current behavor for existing code. In a further patch, get_unused_fd() will be removed so that new code start using get_unused_fd_flags(), with the hope O_CLOEXEC could be used, either by default or choosen by userspace. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:10 UTC
6b9cdf3 Yann Droneaud 10 December 2014, 23:45:39 UTC ppc/cell: replace get_unused_fd() with get_unused_fd_flags(0) This patch replaces calls to get_unused_fd() with equivalent call to get_unused_fd_flags(0) to preserve current behavor for existing code. In a further patch, get_unused_fd() will be removed so that new code start using get_unused_fd_flags(), with the hope O_CLOEXEC could be used, either by default or choosen by userspace. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:10 UTC
aeb682d Yann Droneaud 10 December 2014, 23:45:36 UTC ia64: replace get_unused_fd() with get_unused_fd_flags(0) This patch replaces calls to get_unused_fd() with equivalent call to get_unused_fd_flags(0) to preserve current behavor for existing code. In a further patch, get_unused_fd() will be removed so that new code start using get_unused_fd_flags(), with the hope O_CLOEXEC could be used, either by default or choosen by userspace. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:10 UTC
7c8bd23 Oleg Nesterov 10 December 2014, 23:45:33 UTC exit: ptrace: shift "reap dead" code from exit_ptrace() to forget_original_parent() Now that forget_original_parent() uses ->ptrace_entry for EXIT_DEAD tasks, we can simply pass "dead_children" list to exit_ptrace() and remove another release_task() loop. Plus this way we do not need to drop and reacquire tasklist_lock. Also shift the list_empty(ptraced) check, if we want this optimization it makes sense to eliminate the function call altogether. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com>, Cc: Sterling Alexander <stalexan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@hack.frob.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:10 UTC
2831096 Oleg Nesterov 10 December 2014, 23:45:30 UTC exit: reparent: cleanup the usage of reparent_leader() 1. Now that reparent_leader() doesn't abuse ->sibling we can shift list_move_tail() from reparent_leader() to forget_original_parent() and turn it into a single list_splice_tail_init(). This also makes BUG_ON(!list_empty()) and list_for_each_entry_safe() unnecessary. 2. This also allows to shift the same_thread_group() check, it looks a bit more clear in the caller. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com>, Cc: Sterling Alexander <stalexan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@hack.frob.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:10 UTC
57a0591 Oleg Nesterov 10 December 2014, 23:45:27 UTC exit: reparent: cleanup the changing of ->parent 1. Cosmetic, but "if (t->parent == father)" looks a bit confusing. We need to change t->parent if and only if t is not traced. 2. If we actually want this BUG_ON() to ensure that parent/ptrace match each other, then we should also take ptrace_reparented() case into account too. 3. Change this code to use for_each_thread() instead of deprecated while_each_thread(). [dan.carpenter@oracle.com: silence a bogus static checker warning] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com>, Cc: Sterling Alexander <stalexan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@hack.frob.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:10 UTC
dc2fd4b Oleg Nesterov 10 December 2014, 23:45:24 UTC exit: reparent: use ->ptrace_entry rather than ->sibling for EXIT_DEAD tasks reparent_leader() reuses ->sibling as a list node to add an EXIT_DEAD task into dead_children list we are going to release. This obviously removes the dead task from its real_parent->children list and this is even good; the parent can do nothing with the EXIT_DEAD reparented zombie, it only makes do_wait() slower. But, this also means that it can not be reparented once again, so if its new parent dies too nobody will update ->parent/real_parent, they can point to the freed memory even before release_task() we are going to call, this breaks the code which relies on pid_alive() to access ->real_parent/parent. Fortunately this is mostly theoretical, this can only happen if init or PR_SET_CHILD_SUBREAPER process ignores SIGCHLD and the new parent sub-thread exits right after we drop tasklist_lock. Change this code to use ->ptrace_entry instead, we know that the child is not traced so nobody can ever use this member. This also allows to unify this logic with exit_ptrace(), see the next changes. Note: we really need to change release_task() to nullify real_parent/ parent/group_leader pointers, but we need to change the current users first somehow. And it would be better to reap this zombie immediately but release_task_locked() we need is complicated by proc_flush_task(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com>, Cc: Sterling Alexander <stalexan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@hack.frob.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:10 UTC
a90e984 Oleg Nesterov 10 December 2014, 23:45:21 UTC sched_show_task: fix unsafe usage of ->real_parent rcu_read_lock() can not protect p->real_parent if release_task(p) was already called, change sched_show_task() to check pis_alive() like other users do. Note: we need some helpers to cleanup the code like this. And it seems that that the usage of cpu_curr(cpu) in dump_cpu_task() is not safe too. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com>, Cc: Sterling Alexander <stalexan@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Roland McGrath <roland@hack.frob.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:09 UTC
abdba6e Oleg Nesterov 10 December 2014, 23:45:18 UTC proc: task_state: ptrace_parent() doesn't need pid_alive() check p->ptrace != 0 means that release_task(p) was not called, so pid_alive() buys nothing and we can remove this check. Other callers already use it directly without additional checks. Note: with or without this patch ptrace_parent() can return the pointer to the freed task, this will be explained/fixed later. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com>, Cc: Sterling Alexander <stalexan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@hack.frob.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:09 UTC
b0fafc1 Oleg Nesterov 10 December 2014, 23:45:15 UTC proc: task_state: move the main seq_printf() outside of rcu_read_lock() task_state() does seq_printf() under rcu_read_lock(), but this is only needed for task_tgid_nr_ns() and task_numa_group_id(). We can calculate tgid/ngid and drop rcu lock. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com>, Cc: Sterling Alexander <stalexan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@hack.frob.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:09 UTC
0f4a0d5 Oleg Nesterov 10 December 2014, 23:45:12 UTC proc: task_state: deuglify the max_fds calculation 1. The usage of fdt looks very ugly, it can't be NULL if ->files is not NULL. We can use "unsigned int max_fds" instead. 2. This also allows to move seq_printf(max_fds) outside of task_lock() and join it with the previous seq_printf(). See also the next patch. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com>, Cc: Sterling Alexander <stalexan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@hack.frob.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:09 UTC
4af1036 Oleg Nesterov 10 December 2014, 23:45:10 UTC proc: task_state: read cred->group_info outside of task_lock() task_state() reads cred->group_info under task_lock() because a long ago it was task_struct->group_info and it was actually protected by task->alloc_lock. Today this task_unlock() after rcu_read_unlock() just adds the confusion, move task_unlock() up. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com>, Cc: Sterling Alexander <stalexan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@hack.frob.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:09 UTC
2fc1e94 Nicolas Dichtel 10 December 2014, 23:45:07 UTC fs/proc.c: use rb_entry_safe() instead of rb_entry() Better to use existing macro that rewriting them. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:09 UTC
b208d54 Debabrata Banerjee 10 December 2014, 23:45:04 UTC procfs: fix error handling of proc_register() proc_register() error paths are leaking inodes and directory refcounts. Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:09 UTC
710585d Nicolas Dichtel 10 December 2014, 23:45:01 UTC fs/proc: use a rb tree for the directory entries When a lot of netdevices are created, one of the bottleneck is the creation of proc entries. This serie aims to accelerate this part. The current implementation for the directories in /proc is using a single linked list. This is slow when handling directories with large numbers of entries (eg netdevice-related entries when lots of tunnels are opened). This patch replaces this linked list by a red-black tree. Here are some numbers: dummy30000.batch contains 30 000 times 'link add type dummy'. Before the patch: $ time ip -b dummy30000.batch real 2m31.950s user 0m0.440s sys 2m21.440s $ time rmmod dummy real 1m35.764s user 0m0.000s sys 1m24.088s After the patch: $ time ip -b dummy30000.batch real 2m0.874s user 0m0.448s sys 1m49.720s $ time rmmod dummy real 1m13.988s user 0m0.000s sys 1m1.008s The idea of improving this part was suggested by Thierry Herbelot. [akpm@linux-foundation.org: initialise proc_root.subdir at compile time] Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: Thierry Herbelot <thierry.herbelot@6wind.com>. Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:09 UTC
9edad6e Johannes Weiner 10 December 2014, 23:44:58 UTC mm: move page->mem_cgroup bad page handling into generic code Now that the external page_cgroup data structure and its lookup is gone, let the generic bad_page() check for page->mem_cgroup sanity. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Tejun Heo <tj@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:09 UTC
5d1ea48 Johannes Weiner 10 December 2014, 23:44:55 UTC mm: page_cgroup: rename file to mm/swap_cgroup.c Now that the external page_cgroup data structure and its lookup is gone, the only code remaining in there is swap slot accounting. Rename it and move the conditional compilation into mm/Makefile. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Tejun Heo <tj@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:09 UTC
1306a85 Johannes Weiner 10 December 2014, 23:44:52 UTC mm: embed the memcg pointer directly into struct page Memory cgroups used to have 5 per-page pointers. To allow users to disable that amount of overhead during runtime, those pointers were allocated in a separate array, with a translation layer between them and struct page. There is now only one page pointer remaining: the memcg pointer, that indicates which cgroup the page is associated with when charged. The complexity of runtime allocation and the runtime translation overhead is no longer justified to save that *potential* 0.19% of memory. With CONFIG_SLUB, page->mem_cgroup actually sits in the doubleword padding after the page->private member and doesn't even increase struct page, and then this patch actually saves space. Remaining users that care can still compile their kernels without CONFIG_MEMCG. text data bss dec hex filename 8828345 1725264 983040 11536649 b00909 vmlinux.old 8827425 1725264 966656 11519345 afc571 vmlinux.new [mhocko@suse.cz: update Documentation/cgroups/memory.txt] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Tejun Heo <tj@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:09 UTC
22811c6 Johannes Weiner 10 December 2014, 23:44:50 UTC mm: memcontrol: remove stale page_cgroup_lock comment There is no cgroup-specific page lock anymore. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:08 UTC
a1ad289 Li Haifeng 10 December 2014, 23:44:47 UTC mm/frontswap.c: fix the condition in BUG_ON The largest index of swap device is MAX_SWAPFILES-1. So the type should be less than MAX_SWAPFILES. Signed-off-by: Haifeng Li <omycle@gmail.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:08 UTC
26086de Wei Yuan 10 December 2014, 23:44:44 UTC mm: fix a spelling mistake Signed-off-by Wei Yuan <weiyuan.wei@huawei.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:08 UTC
569f48b Hillf Danton 10 December 2014, 23:44:41 UTC mm: hugetlb: fix __unmap_hugepage_range() First, after flushing TLB, we have no need to scan pte from start again. Second, before bail out loop, the address is forwarded one step. Signed-off-by: Hillf Danton <hillf.zj@alibaba-inc.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:08 UTC
e4bd6a0 Michal Hocko 10 December 2014, 23:44:39 UTC mm, memcg: fix potential undefined behaviour in page stat accounting Since commit d7365e783edb ("mm: memcontrol: fix missed end-writeback page accounting") mem_cgroup_end_page_stat consumes locked and flags variables directly rather than via pointers which might trigger C undefined behavior as those variables are initialized only in the slow path of mem_cgroup_begin_page_stat. Although mem_cgroup_end_page_stat handles parameters correctly and touches them only when they hold a sensible value it is caller which loads a potentially uninitialized value which then might allow compiler to do crazy things. I haven't seen any warning from gcc and it seems that the current version (4.9) doesn't exploit this type undefined behavior but Sasha has reported the following: UBSan: Undefined behaviour in mm/rmap.c:1084:2 load of value 255 is not a valid value for type '_Bool' CPU: 4 PID: 8304 Comm: rngd Not tainted 3.18.0-rc2-next-20141029-sasha-00039-g77ed13d-dirty #1427 Call Trace: dump_stack (lib/dump_stack.c:52) ubsan_epilogue (lib/ubsan.c:159) __ubsan_handle_load_invalid_value (lib/ubsan.c:482) page_remove_rmap (mm/rmap.c:1084 mm/rmap.c:1096) unmap_page_range (./arch/x86/include/asm/atomic.h:27 include/linux/mm.h:463 mm/memory.c:1146 mm/memory.c:1258 mm/memory.c:1279 mm/memory.c:1303) unmap_single_vma (mm/memory.c:1348) unmap_vmas (mm/memory.c:1377 (discriminator 3)) exit_mmap (mm/mmap.c:2837) mmput (kernel/fork.c:659) do_exit (./arch/x86/include/asm/thread_info.h:168 kernel/exit.c:462 kernel/exit.c:747) do_group_exit (include/linux/sched.h:775 kernel/exit.c:873) SyS_exit_group (kernel/exit.c:901) tracesys_phase2 (arch/x86/kernel/entry_64.S:529) Fix this by using pointer parameters for both locked and flags and be more robust for future compiler changes even though the current code is implemented correctly. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:08 UTC
c164e03 Kirill A. Shutemov 10 December 2014, 23:44:36 UTC mm: fix huge zero page accounting in smaps report As a small zero page, huge zero page should not be accounted in smaps report as normal page. For small pages we rely on vm_normal_page() to filter out zero page, but vm_normal_page() is not designed to handle pmds. We only get here due hackish cast pmd to pte in smaps_pte_range() -- pte and pmd format is not necessary compatible on each and every architecture. Let's add separate codepath to handle pmds. follow_trans_huge_pmd() will detect huge zero page for us. We would need pmd_dirty() helper to do this properly. The patch adds it to THP-enabled architectures which don't yet have one. [akpm@linux-foundation.org: use do_div to fix 32-bit build] Signed-off-by: "Kirill A. Shutemov" <kirill@shutemov.name> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengwei Yin <yfw.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:08 UTC
2314b42 Johannes Weiner 10 December 2014, 23:44:33 UTC mm: memcontrol: drop bogus RCU locking from mem_cgroup_same_or_subtree() None of the mem_cgroup_same_or_subtree() callers actually require it to take the RCU lock, either because they hold it themselves or they have css references. Remove it. To make the API change clear, rename the leftover helper to mem_cgroup_is_descendant() to match cgroup_is_descendant(). Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:08 UTC
413918b Johannes Weiner 10 December 2014, 23:44:30 UTC mm: memcontrol: pull the NULL check from __mem_cgroup_same_or_subtree() The NULL in mm_match_cgroup() comes from a possibly exiting mm->owner. It makes a lot more sense to check where it's looked up, rather than check for it in __mem_cgroup_same_or_subtree() where it's unexpected. No other callsite passes NULL to __mem_cgroup_same_or_subtree(). Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:08 UTC
c01f46c Johannes Weiner 10 December 2014, 23:44:27 UTC mm: memcontrol: remove bogus NULL check after mem_cgroup_from_task() That function acts like a typecast - unless NULL is passed in, no NULL can come out. task_in_mem_cgroup() callers don't pass NULL tasks. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Michal Hocko <mhocko@suse.cz Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:08 UTC
312722c Johannes Weiner 10 December 2014, 23:44:25 UTC mm: memcontrol: shorten the page statistics update slowpath While moving charges from one memcg to another, page stat updates must acquire the old memcg's move_lock to prevent double accounting. That situation is denoted by an increased memcg->move_accounting. However, the charge moving code declares this way too early for now, even before summing up the RSS and pre-allocating destination charges. Shorten this slowpath mode by increasing memcg->move_accounting only right before walking the task's address space with the intention of actually moving the pages. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:08 UTC
e544a4e Kirill A. Shutemov 10 December 2014, 23:44:22 UTC thp: do not mark zero-page pmd write-protected explicitly Zero pages can be used only in anonymous mappings, which never have writable vma->vm_page_prot: see protection_map in mm/mmap.c and __PX1X definitions. Let's drop redundant pmd_wrprotect() in set_huge_zero_page(). Signed-off-by: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:08 UTC
b047501 Vladimir Davydov 10 December 2014, 23:44:19 UTC memcg: use generic slab iterators for showing slabinfo Let's use generic slab_start/next/stop for showing memcg caches info. In contrast to the current implementation, this will work even if all memcg caches' info doesn't fit into a seq buffer (a page), plus it simply looks neater. Actually, the main reason I do this isn't mere cleanup. I'm going to zap the memcg_slab_caches list, because I find it useless provided we have the slab_caches list, and this patch is a step in this direction. It should be noted that before this patch an attempt to read memory.kmem.slabinfo of a cgroup that doesn't have kmem limit set resulted in -EIO, while after this patch it will silently show nothing except the header, but I don't think it will frustrate anyone. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:07 UTC
4ef461e Vladimir Davydov 10 December 2014, 23:44:16 UTC memcg: remove mem_cgroup_reclaimable check from soft reclaim mem_cgroup_reclaimable() checks whether a cgroup has reclaimable pages on *any* NUMA node. However, the only place where it's called is mem_cgroup_soft_reclaim(), which tries to reclaim memory from a *specific* zone. So the way it is used is incorrect - it will return true even if the cgroup doesn't have pages on the zone we're scanning. I think we can get rid of this check completely, because mem_cgroup_shrink_node_zone(), which is called by mem_cgroup_soft_reclaim() if mem_cgroup_reclaimable() returns true, is equivalent to shrink_lruvec(), which exits almost immediately if the lruvec passed to it is empty. So there's no need to optimize anything here. Besides, we don't have such a check in the general scan path (shrink_zone) either. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:07 UTC
97ad2be Sasha Levin 10 December 2014, 23:44:13 UTC mm, hugetlb: correct bit shift in hstate_sizelog() hstate_sizelog() would shift left an int rather than long, triggering undefined behaviour and passing an incorrect value when the requested page size was more than 4GB, thus breaking >4GB pages. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:07 UTC
247b144 Johannes Weiner 10 December 2014, 23:44:11 UTC mm: memcontrol: fold mem_cgroup_start_move()/mem_cgroup_end_move() Having these functions and their documentation split out and somewhere makes it harder, not easier, to follow what's going on. Inline them directly where charge moving is prepared and finished, and put an explanation right next to it. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:07 UTC
4e2f245 Johannes Weiner 10 December 2014, 23:44:08 UTC mm: memcontrol: don't pass a NULL memcg to mem_cgroup_end_move() mem_cgroup_end_move() checks if the passed memcg is NULL, along with a lengthy comment to explain why this seemingly non-sensical situation is even possible. Check in cancel_attach() itself whether can_attach() set up the move context or not, it's a lot more obvious from there. Then remove the check and comment in mem_cgroup_end_move(). Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:07 UTC
354a478 Johannes Weiner 10 December 2014, 23:44:05 UTC mm: memcontrol: inline memcg->move_lock locking The wrappers around taking and dropping the memcg->move_lock spinlock add nothing of value. Inline the spinlock calls into the callsites. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:07 UTC
2983331 Johannes Weiner 10 December 2014, 23:44:02 UTC mm: memcontrol: remove unnecessary PCG_USED pc->mem_cgroup valid flag pc->mem_cgroup had to be left intact after uncharge for the final LRU removal, and !PCG_USED indicated whether the page was uncharged. But since commit 0a31bc97c80c ("mm: memcontrol: rewrite uncharge API") pages are uncharged after the final LRU removal. Uncharge can simply clear the pointer and the PCG_USED/PageCgroupUsed sites can test that instead. Because this is the last page_cgroup flag, this patch reduces the memcg per-page overhead to a single pointer. [akpm@linux-foundation.org: remove unneeded initialization of `memcg', per Michal] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 December 2014, 01:41:07 UTC
back to top