https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
bfa76d4 Linux 3.19 09 February 2015, 02:54:22 UTC
da2d96d Merge tag 'nios2-fixes-v3.19-final' of git://git.rocketboards.org/linux-socfpga-next Pull nios2 fix from Ley Foon Tan: "This fixes incorrect behavior of some user programs" * tag 'nios2-fixes-v3.19-final' of git://git.rocketboards.org/linux-socfpga-next: nios2: fix unhandled signals 09 February 2015, 02:45:16 UTC
cdecbb3 Merge git://git.kvack.org/~bcrl/aio-fixes Pull aio nested sleep annotation from Ben LaHaise, * git://git.kvack.org/~bcrl/aio-fixes: aio: annotate aio_read_event_ring for sleep patterns 09 February 2015, 02:27:58 UTC
4e02370 Merge tag 'trace-fixes-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fixes from Steven Rostedt: "During testing Sedat Dilek hit a "suspicious RCU usage" splat that pointed out a real bug. During suspend and resume the tlb_flush tracepoint is called when the CPU is going offline. As the CPU has been noted as offline, RCU is ignoring that CPU, which means that it can not use RCU protected locks. When tracepoints are activated, they require RCU locking, and if RCU is ignoring a CPU that runs a tracepoint, there is a chance that the tracepoint could cause corruption. The solution was to change the tracepoint into a TRACE_EVENT_CONDITION() which allows us to check a condition to determine if the tracepoint should be called or not. If the condition is not met, the rcu protected code will not be executed. By adding the condition "cpu_online(smp_processor_id())", this will prevent the RCU protected code from being executed if the CPU is marked offline. After adding this, another bug was discovered. As RCU checks rcu callers, if a rcu call is not done, there is no check (obviously). We found that tracepoints could be added in RCU ignored locations and not have lockdep complain until the tracepoint is activated. This missed places where tracepoints were added in places they should not have been. To fix this, code was added in 3.18 that if lockdep is enabled, any tracepoint will still call the rcu checks even if the tracepoint is not enabled. The bug here, is that the check does not take the CONDITION into account. As the condition may prevent tracepoints from being activated in RCU ignored areas (as the one patch does), we get false positives when we enable lockdep and hit a tracepoint that the condition prevents it from being called in a RCU ignored location. The fix for this is to add the CONDITION to the rcu checks, even if the tracepoint is not enabled" * tag 'trace-fixes-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: x86/tlb/trace: Do not trace on CPU that is offline tracing: Add condition check to RCU lockdep checks 09 February 2015, 02:08:14 UTC
a3248d6 nios2: fix unhandled signals Follow other architectures for user fault handling. Signed-off-by: Chung-Ling Tang <cltang@codesourcery.com> Acked-by: Ley Foon Tan <lftan@altera.com> 09 February 2015, 01:47:05 UTC
6c8465a x86/tlb/trace: Do not trace on CPU that is offline When taking a CPU down for suspend and resume, a tracepoint may be called when the CPU has been designated offline. As tracepoints require RCU for protection, they must not be called if the current CPU is offline. Unfortunately, trace_tlb_flush() is called in this scenario as was noted by LOCKDEP: ... Disabling non-boot CPUs ... intel_pstate CPU 1 exiting =============================== smpboot: CPU 1 didn't die... [ INFO: suspicious RCU usage. ] 3.19.0-rc7-next-20150204.1-iniza-small #1 Not tainted ------------------------------- include/trace/events/tlb.h:35 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 0 no locks held by swapper/1/0. stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.19.0-rc7-next-20150204.1-iniza-small #1 Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 0000000000000001 ffff88011a44fe18 ffffffff817e370d 0000000000000011 ffff88011a448290 ffff88011a44fe48 ffffffff810d6847 ffff8800c66b9600 0000000000000001 ffff88011a44c000 ffffffff81cb3900 ffff88011a44fe78 Call Trace: [<ffffffff817e370d>] dump_stack+0x4c/0x65 [<ffffffff810d6847>] lockdep_rcu_suspicious+0xe7/0x120 [<ffffffff810b71a5>] idle_task_exit+0x205/0x2c0 [<ffffffff81054c4e>] play_dead_common+0xe/0x50 [<ffffffff81054ca5>] native_play_dead+0x15/0x140 [<ffffffff8102963f>] arch_cpu_idle_dead+0xf/0x20 [<ffffffff810cd89e>] cpu_startup_entry+0x37e/0x580 [<ffffffff81053e20>] start_secondary+0x140/0x150 intel_pstate CPU 2 exiting ... By converting the tlb_flush tracepoint to a TRACE_EVENT_CONDITION where the condition is cpu_online(smp_processor_id()), we can avoid calling RCU protected code when the CPU is offline. Link: http://lkml.kernel.org/r/CA+icZUUGiGDoL5NU8RuxKzFjoLjEKRtUWx=JB8B9a0EQv-eGzQ@mail.gmail.com Cc: stable@vger.kernel.org # 3.17+ Fixes: d17d8f9dedb9 "x86/mm: Add tracepoints for TLB flushes" Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Suggested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Hansen <dave@sr71.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 08 February 2015, 00:34:55 UTC
a05d59a tracing: Add condition check to RCU lockdep checks The trace_tlb_flush() tracepoint can be called when a CPU is going offline. When a CPU is offline, RCU is no longer watching that CPU and since the tracepoint is protected by RCU, it must not be called. To prevent the tlb_flush tracepoint from being called when the CPU is offline, it was converted to a TRACE_EVENT_CONDITION where the condition checks if the CPU is online before calling the tracepoint. Unfortunately, this was not enough to stop lockdep from complaining about it. Even though the RCU protected code of the tracepoint will never be called, the condition is hidden within the tracepoint, and even though the condition prevents RCU code from being called, the lockdep checks are outside the tracepoint (this is to test tracepoints even when they are not enabled). Even though tracepoints should be checked to be RCU safe when they are not enabled, the condition should still be considered when checking RCU. Link: http://lkml.kernel.org/r/CA+icZUUGiGDoL5NU8RuxKzFjoLjEKRtUWx=JB8B9a0EQv-eGzQ@mail.gmail.com Fixes: 3a630178fd5f "tracing: generate RCU warnings even when tracepoints are disabled" Cc: stable@vger.kernel.org # 3.18+ Acked-by: Dave Hansen <dave@sr71.net> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 08 February 2015, 00:34:25 UTC
0b1ce1a Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull one more infiniband revert from Roland Dreier: "One more last-second RDMA change for 3.19: Yann realized that the previous revert of new userspace ABI did not go far enough, and we're still exposing a change that we don't want. Revert even closer to 3.18 interface to make sure we get things right in the long run" Yann Droneaud pipes up: "I hope this could go in v3.19 as, at this stage, we don't want to expose any bits of this ABI in a released kernel" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: Revert "IB/core: Add support for extended query device caps" 07 February 2015, 19:10:40 UTC
bdfeb5a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fix from Chris Mason: "Forrest Liu tracked down a missing blk_finish_plug in the btrfs logging code. This isn't a new bug, and it's hard to hit. But, it's safe enough for inclusion now, and in my for-linus branch" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: add missing blk_finish_plug in btrfs_sync_log() 07 February 2015, 19:04:48 UTC
26cdd1f Merge branches 'timers-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer and x86 fix from Ingo Molnar: "A CLOCK_TAI early expiry fix and an x86 microcode driver oops fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimer: Fix incorrect tai offset calculation for non high-res timer systems * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode: Return error from driver init code when loader is disabled 06 February 2015, 21:56:02 UTC
396e909 Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Fix deadline parameter modification handling sched/wait: Remove might_sleep() from wait_event_cmd() sched: Fix crash if cpuset_cpumask_can_shrink() is passed an empty cpumask sched/fair: Avoid using uninitialized variable in preferred_group_nid() 06 February 2015, 21:34:26 UTC
29f12c4 Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core kernel fixes from Ingo Molnar: "Two liblockdep fixes and a CPU hotplug race fix" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/liblockdep: don't include host headers tools/liblockdep: ignore generated .so file smpboot: Add missing get_online_cpus() in smpboot_register_percpu_thread() 06 February 2015, 21:06:10 UTC
2af613d Merge tag 'sound-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Hopefully the final pull request for 3.19: this ended up with a slightly higher volume than wished, but I put them all as they are either stable or 3.19 regression fixes. Most of commits are from ASoC, and have been stewed for a while in linux-next. The only change in the common code is the regression fixes for ASoC AC97 stuff wrt device registrations. The rest are device-specific, mostly small fixes in various ASoC drivers and ak411x on ice1724 boards" * tag 'sound-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: Intel: fix sst firmware path for cht-bsw-rt5672 ARM: dts: Fix I2S1, I2S2 compatible for exynos4 SoCs ASoC: sgtl5000: add delay before first I2C access MAINTAINERS: ASoC: add maintainer for Intel BDW/HSW ASoC driver ASoC: atmel_ssc_dai: fix the setting for DSP mode ASoC: sgtl5000: Use shift mask when setting codec mode ASoC: tlv320aic3x: Fix data delay configuration ALSA: ak411x: Fix stall in work callback ASoC: Intel: Used lock version to update shim registers ASoC: wm8731: init mutex in i2c init path ASoC: atmel_ssc_dai: fix start event for I2S mode ASoC: rt5640: Add RT5642 ACPI ID for Intel Baytrail ASoC: wm97xx: Reset AC'97 device before registering it ASoC: Add support for allocating AC'97 device before registering it 06 February 2015, 20:50:37 UTC
48beb12 Merge branch 'akpm' (patches from Andrew Morton) Merge misc fixes from Andrew Morton: "7 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/debug_pagealloc: fix build failure on ppc and some other archs nilfs2: fix deadlock of segment constructor over I_SYNC flag MAINTAINERS: remove SUPERH website memcg, shmem: fix shmem migration to use lrucare mm: export "high_memory" symbol on !MMU .mailmap: update Konstantin Khlebnikov's email address mm: pagewalk: call pte_hole() for VM_PFNMAP during walk_page_range 06 February 2015, 16:52:53 UTC
dbf3b7d Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fixes from Ralf Baechle: "The pending MIPS fixes for 3.19. All across the field and nothing particularly severe or dramatic" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (23 commits) IRQCHIP: mips-gic: Avoid rerouting timer IRQs for smp-cmp MIPS: Fix syscall_get_nr for the syscall exit tracing. MIPS: elf2ecoff: Ignore PT_MIPS_ABIFLAGS program headers. MIPS: elf2ecoff: Rewrite main processing loop to switch. MIPS: fork: Fix MSA/FPU/DSP context duplication race MIPS: Fix C0_Pagegrain[IEC] support. MIPS: traps: Fix inline asm ctc1 missing .set hardfloat MIPS: mipsregs.h: Add write_32bit_cp1_register() MIPS: Fix kernel lockup or crash after CPU offline/online MIPS: OCTEON: fix kernel crash when offlining a CPU MIPS: ARC: Fix build error. MIPS: IRQ: Fix disable_irq on CPU IRQs MIPS: smp-mt,smp-cmp: Enable all HW IRQs on secondary CPUs MIPS: Fix restart of indirect syscalls MIPS: ELF: fix loading o32 binaries on 64-bit kernels MIPS: mips-cm: Fix sparse warnings MIPS: Kconfig: Fix recursive dependency. MIPS: Compat: Fix build error if CONFIG_MIPS32_COMPAT but no compat ABI. MIPS: JZ4740: Fixup #include's (sparse) MIPS: Wire up execveat(2). ... 06 February 2015, 16:28:54 UTC
43c6116 Revert "IB/core: Add support for extended query device caps" While commit 7e36ef8205ff ("IB/core: Temporarily disable ex_query_device uverb") is correct as it makes the extended QUERY_DEVICE uverb (which came as part of commit 5a77abf9a97a ("IB/core: Add support for extended query device caps") and commit 860f10a799c8 ("IB/core: Add flags for on demand paging support")) not available to userspace, it doesn't address the initial issue regarding ib_copy_to_udata() [1][2]. Additionally, further discussions around this new uverb seems to conclude it would require a different data structure than the one currently described in <rdma/ib_user_verbs.h> [3]. Both of these issues require a revert of the changes, so this patch partially reverts commit 8cdd312cfed7 ("IB/mlx5: Implement the ODP capability query verb") and commit 860f10a799c8 ("IB/core: Add flags for on demand paging support") and fully reverts commit 5a77abf9a97a ("IB/core: Add support for extended query device caps"). [1] "Re: [PATCH v3 06/17] IB/core: Add support for extended query device caps" http://mid.gmane.org/1418733236.2779.26.camel@opteya.com [2] "Re: [PATCH] IB/core: Temporarily disable ex_query_device uverb" http://mid.gmane.org/1423067503.3030.83.camel@opteya.com [3] "RE: [PATCH v1 1/5] IB/uverbs: ex_query_device: answer must not depend on request's comp_mask" http://mid.gmane.org/2807E5FD2F6FDA4886F6618EAC48510E0CC12C30@CRSMSX101.amr.corp.intel.com Cc: Eli Cohen <eli@mellanox.com> Cc: Haggai Eran <haggaie@mellanox.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com> 06 February 2015, 08:54:33 UTC
7b02190 mm/debug_pagealloc: fix build failure on ppc and some other archs Kim Phillips reported following build failure. LD init/built-in.o mm/built-in.o: In function `free_pages_prepare': mm/page_alloc.c:770: undefined reference to `.kernel_map_pages' mm/built-in.o: In function `prep_new_page': mm/page_alloc.c:933: undefined reference to `.kernel_map_pages' mm/built-in.o: In function `map_pages': mm/compaction.c:61: undefined reference to `.kernel_map_pages' make: *** [vmlinux] Error 1 Reason for this problem is that commit 031bc5743f15 ("mm/debug-pagealloc: make debug-pagealloc boottime configurable") forgot to remove the old declaration of kernel_map_pages() for some architectures. This patch removes them to fix build failure. Reported-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: David Miller <davem@davemloft.net> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 February 2015, 21:35:30 UTC
7ef3ff2 nilfs2: fix deadlock of segment constructor over I_SYNC flag Nilfs2 eventually hangs in a stress test with fsstress program. This issue was caused by the following deadlock over I_SYNC flag between nilfs_segctor_thread() and writeback_sb_inodes(): nilfs_segctor_thread() nilfs_segctor_thread_construct() nilfs_segctor_unlock() nilfs_dispose_list() iput() iput_final() evict() inode_wait_for_writeback() * wait for I_SYNC flag writeback_sb_inodes() * set I_SYNC flag on inode->i_state __writeback_single_inode() do_writepages() nilfs_writepages() nilfs_construct_dsync_segment() nilfs_segctor_sync() * wait for completion of segment constructor inode_sync_complete() * clear I_SYNC flag after __writeback_single_inode() completed writeback_sb_inodes() calls do_writepages() for dirty inodes after setting I_SYNC flag on inode->i_state. do_writepages() in turn calls nilfs_writepages(), which can run segment constructor and wait for its completion. On the other hand, segment constructor calls iput(), which can call evict() and wait for the I_SYNC flag on inode_wait_for_writeback(). Since segment constructor doesn't know when I_SYNC will be set, it cannot know whether iput() will block or not unless inode->i_nlink has a non-zero count. We can prevent evict() from being called in iput() by implementing sop->drop_inode(), but it's not preferable to leave inodes with i_nlink == 0 for long periods because it even defers file truncation and inode deallocation. So, this instead resolves the deadlock by calling iput() asynchronously with a workqueue for inodes with i_nlink == 0. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 February 2015, 21:35:29 UTC
81cca6f MAINTAINERS: remove SUPERH website The mentioned website only displays information about buying and selling domains. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 February 2015, 21:35:29 UTC
f5e03a4 memcg, shmem: fix shmem migration to use lrucare It has been reported that 965GM might trigger VM_BUG_ON_PAGE(!lrucare && PageLRU(oldpage), oldpage) in mem_cgroup_migrate when shmem wants to replace a swap cache page because of shmem_should_replace_page (the page is allocated from an inappropriate zone). shmem_replace_page expects that the oldpage is not on LRU list and calls mem_cgroup_migrate without lrucare. This is obviously incorrect because swapcache pages might be on the LRU list (e.g. swapin readahead page). Fix this by enabling lrucare for the migration in shmem_replace_page. Also clarify that lrucare should be used even if one of the pages might be on LRU list. The BUG_ON will trigger only when CONFIG_DEBUG_VM is enabled but even without that the migration code might leave the old page on an inappropriate memcg' LRU which is not that critical because the page would get removed with its last reference but it is still confusing. Fixes: 0a31bc97c80c ("mm: memcontrol: rewrite uncharge API") Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-by: Dave Airlie <airlied@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> [3.17+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 February 2015, 21:35:29 UTC
944b687 mm: export "high_memory" symbol on !MMU The symbol 'high_memory' is provided on both MMU- and NOMMU-kernels, but only one of them is exported, which leads to module build errors in drivers that work fine built-in: ERROR: "high_memory" [drivers/net/virtio_net.ko] undefined! ERROR: "high_memory" [drivers/net/ppp/ppp_mppe.ko] undefined! ERROR: "high_memory" [drivers/mtd/nand/nand.ko] undefined! ERROR: "high_memory" [crypto/tcrypt.ko] undefined! ERROR: "high_memory" [crypto/cts.ko] undefined! This exports the symbol to get these to work on NOMMU as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Greg Ungerer <gerg@uclinux.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 February 2015, 21:35:29 UTC
21d543f .mailmap: update Konstantin Khlebnikov's email address get_maintainer.pl returns k.khlebnikov@samsung.com via git history, for which emails get rejected: RCPT TO:<k.khlebnikov@samsung.com> 550 5.1.1 Recipient address rejected: User unknown Use his other address that passes vger's mxverify: RCPT TO:<koct9i@gmail.com> 250 2.1.5 OK ir10si13843754pbc.62 - gsmtp and add his old email address in the wrong email address field. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 February 2015, 21:35:29 UTC
23aaed6 mm: pagewalk: call pte_hole() for VM_PFNMAP during walk_page_range walk_page_range() silently skips vma having VM_PFNMAP set, which leads to undesirable behaviour at client end (who called walk_page_range). Userspace applications get the wrong data, so the effect is like just confusing users (if the applications just display the data) or sometimes killing the processes (if the applications do something with misunderstanding virtual addresses due to the wrong data.) For example for pagemap_read, when no callbacks are called against VM_PFNMAP vma, pagemap_read may prepare pagemap data for next virtual address range at wrong index. Eventually userspace may get wrong pagemap data for a task. Corresponding to a VM_PFNMAP marked vma region, kernel may report mappings from subsequent vma regions. User space in turn may account more pages (than really are) to the task. In my case I was using procmem, procrack (Android utility) which uses pagemap interface to account RSS pages of a task. Due to this bug it was giving a wrong picture for vmas (with VM_PFNMAP set). Fixes: a9ff785e4437 ("mm/pagewalk.c: walk_page_range should avoid VM_PFNMAP areas") Signed-off-by: Shiraz Hashim <shashim@codeaurora.org> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> [3.10+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 February 2015, 21:35:29 UTC
d2255c0 Merge tag 'asoc-fix-ac97-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: AC'97 fixes These are rather too large for this late in the release cycle but they're clear, well understood and have been tested to fix a regression which was introduced for v3.19. The details are all in Lars' changelog and they've been cooking in -next for a while, to a large extent out of conservatism about the size. 05 February 2015, 20:31:19 UTC
deb0873 Merge tag 'asoc-fix-intel-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fix for Intel firmware name Another one liner that arrived after the earlier pull request. There's a trivial conflict with my -next branch, I'll send a pull request with that resolution and some other new stuff before Monday. 05 February 2015, 20:30:43 UTC
08c191d Merge tag 'asoc-fix-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.19 A few last minute fixes for v3.19, all driver specific. None of them stand out particularly - it's all the standard people who are affected will care stuff. The Samsung fix is a DT only fix for the audio controller, it's being merged via the ASoC tree due to process messups (the submitter sent it at the end of a tangentally related series rather than separately to the ARM folks) in order to make sure that it gets to people sooner. 05 February 2015, 20:29:33 UTC
5c2b063 ASoC: Intel: fix sst firmware path for cht-bsw-rt5672 All sst firmware is provided under the intel directory of the linux-firmware tree. By default this directory structure is kept when installing on a target system. Change the path to expect a default linux-firmware installation. Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> 05 February 2015, 20:16:21 UTC
c503ca5 Merge remote-tracking branch 'asoc/fix/samsung' into asoc-linus 05 February 2015, 19:36:29 UTC
fddcd30 ARM: dts: Fix I2S1, I2S2 compatible for exynos4 SoCs I2S1, I2S2 on Exynos4 SoC series have limited functionality compared to I2S0, "samsung,s3c6410-i2s" compatible should be used for them. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org 05 February 2015, 19:36:00 UTC
b2dde2f Merge remote-tracking branch 'asoc/fix/wm8731' into asoc-linus 05 February 2015, 19:34:53 UTC
125e7f1 Merge remote-tracking branch 'asoc/fix/tlv320aic3x' into asoc-linus 05 February 2015, 19:34:46 UTC
4b871df Merge remote-tracking branch 'asoc/fix/sgtl5000' into asoc-linus 05 February 2015, 19:34:40 UTC
542af23 Merge remote-tracking branch 'asoc/fix/rt5640' into asoc-linus 05 February 2015, 19:34:34 UTC
57e6ef3 Merge remote-tracking branch 'asoc/fix/intel' into asoc-linus 05 February 2015, 19:34:10 UTC
8c61779 Merge remote-tracking branch 'asoc/fix/atmel' into asoc-linus 05 February 2015, 19:33:44 UTC
9d82f5e MMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Stretch ACKs can kill performance with Reno and CUBIC congestion control, largely due to LRO and GRO. Fix from Neal Cardwell. 2) Fix userland breakage because we accidently emit zero length netlink messages from the bridging code. From Roopa Prabhu. 3) Carry handling in generic csum_tcpudp_nofold is broken, fix from Karl Beldan. 4) Remove bogus dev_set_net() calls from CAIF driver, from Nicolas Dichtel. 5) Make sure PPP deflation never returns a length greater then the output buffer, otherwise we overflow and trigger skb_over_panic(). Fix from Florian Westphal. 6) COSA driver needs VIRT_TO_BUS Kconfig dependencies, from Arnd Bergmann. 7) Don't increase route cached MTU on datagram too big ICMPs. From Li Wei. 8) Fix error path leaks in nf_tables, from Pablo Neira Ayuso. 9) Fix bitmask handling regression in netlink that broke things like acpi userland tools. From Pablo Neira Ayuso. 10) Wrong header pointer passed to param_type2af() in SCTP code, from Saran Maruti Ramanara. 11) Stacked vlans not handled correctly by vlan_get_protocol(), from Toshiaki Makita. 12) Add missing DMA memory barrier to xgene driver, from Iyappan Subramanian. 13) Fix crash in rate estimators, from Eric Dumazet. 14) We've been adding various workarounds, one after another, for the change which added the per-net tcp_sock. It was meant to reduce socket contention but added lots of problems. Reduce this instead to a proper per-cpu socket and that rids us of all the daemons. From Eric Dumazet. 15) Fix memory corruption and OOPS in mlx4 driver, from Jack Morgenstein. 16) When we disabled UFO in the virtio_net device, it introduces some serious performance regressions. The orignal problem was IPV6 fragment ID generation, so fix that properly instead. From Vlad Yasevich. 17) sr9700 driver build breaks on xtensa because it defines macros with the same name as those used by the arch code. Use more unique names. From Chen Gang. 18) Fix endianness in new virio 1.0 mode of the vhost net driver, from Michael S Tsirkin. 19) Several sysctls were setting the maxlen attribute incorrectly, from Sasha Levin. 20) Don't accept an FQ scheduler quantum of zero, that leads to crashes. From Kenneth Klette Jonassen. 21) Fix dumping of non-existing actions in the packet scheduler classifier. From Ignacy Gawędzki. 22) Return the write work_done value when doing TX work in the qlcnic driver. 23) ip6gre_err accesses the info field with the wrong endianness, from Sabrina Dubroca. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits) sit: fix some __be16/u16 mismatches ipv6: fix sparse errors in ip6_make_flowlabel() net: remove some sparse warnings flow_keys: n_proto type should be __be16 ip6_gre: fix endianness errors in ip6gre_err qlcnic: Fix NAPI poll routine for Tx completion amd-xgbe: Set RSS enablement based on hardware features amd-xgbe: Adjust for zero-based traffic class count cls_api.c: Fix dumping of non-existing actions' stats. pkt_sched: fq: avoid hang when quantum 0 net: rds: use correct size for max unacked packets and bytes vhost/net: fix up num_buffers endian-ness gianfar: correct the bad expression while writing bit-pattern net: usb: sr9700: Use 'SR_' prefix for the common register macros Revert "drivers/net: Disable UFO through virtio" Revert "drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets" ipv6: Select fragment id during UFO segmentation if not set. xen-netback: stop the guest rx thread after a fatal error net/mlx4_core: Fix kernel Oops (mem corruption) when working with more than 80 VFs isdn: off by one in connect_res() ... 05 February 2015, 19:23:45 UTC
14365ea Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This patch set is fixing two serious problems which have turned up late in the release cycle. The first fixes a problem with 4k sector disks where the transfer length (amount of data sent to the disk) was getting increased every time the disk was revalidated leading to potential for overflows. The other is a regression oops fix for some of our last merge window code" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sd: Fix max transfer length for 4k disks scsi: fix device handler detach oops 05 February 2015, 19:17:15 UTC
42345d6 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Radeon and amdkfd fixes. Radeon ones mostly for oops in some test/benchmark functions since fencing changes, and one regression fix for old GPUs, There is one cirrus regression fix, the 32bpp broke userspace, so this hides it behind a module option for the few users who care. I'm off for a few days, so this is probably the final pull I have, if I see fixes from Intel I'll forward the pull as I should have email" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/cirrus: Limit modes depending on bpp option drm/radeon: fix the crash in test functions drm/radeon: fix the crash in benchmark functions drm/radeon: properly set vm fragment size for TN/RL drm/radeon: don't init gpuvm if accel is disabled (v3) drm/radeon: fix PLLs on RS880 and older v2 drm/amdkfd: Don't create BUG due to incorrect user parameter drm/amdkfd: max num of queues can't be 0 drm/amdkfd: Fix bug in accounting of queues 05 February 2015, 19:11:44 UTC
d445d46 Merge tag 'spi-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A couple of driver specific fixes: - Disable DMA mode for i.MX6DL chips due to a hardware bug. - Don't use devm_kzalloc() outside of bind/unbind paths in the fsl-dspi driver, fixing memory leaks" * tag 'spi-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: imx: use pio mode for i.mx6dl spi: spi-fsl-dspi: Remove usage of devm_kzalloc 05 February 2015, 19:07:25 UTC
e7394c7 Merge tag 'pm+acpi-3.19-fin' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI power management fix from Rafael Wysocki: "This is a revert of an ACPI Low-power Subsystem (LPSS) driver change that was supposed to improve power management of the LPSS DMA controller, but introduced more serious problems. Since fixing them turns out to be non-trivial, it is better to revert the commit in question at this point and try to fix the original issue differently in the next cycle" * tag 'pm+acpi-3.19-fin' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / LPSS: introduce a 'proxy' device to power on LPSS for DMA" 05 February 2015, 18:57:29 UTC
f3c2352 Merge tag 'pci-v3.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Enumeration - Scan all device numbers on NEC as well as Stratus (Charlotte Richardson) Resource management - Handle read-only BARs on AMD CS553x devices (Myron Stowe) Synopsys DesignWare - Reject MSI-X IRQs (Lucas Stach)" * tag 'pci-v3.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Handle read-only BARs on AMD CS553x devices PCI: Add NEC variants to Stratus ftServer PCIe DMI check PCI: designware: Reject MSI-X IRQs 05 February 2015, 18:23:12 UTC
1b6af71 IRQCHIP: mips-gic: Avoid rerouting timer IRQs for smp-cmp Commit e9de688dac65 ("irqchip: mips-gic: Support local interrupts") changed the GIC irqchip driver so that all local interrupts were routed to the same CPU pin used for external interrupts. Unfortunately this causes a regression when smp-cmp is used. The CPUs are started by the bootloader and put in a timer based waiting poll loop, but when their timer interrupts are rerouted to a different IRQ pin which is not unmasked they never wake up. Since smp-cmp support is deprecated and everybody who was using it should be switching to smp-cps which brings up the secondary CPUs without bootloader assistance, I've gone for the simple fix which can be easily removed once smp-cmp is removed, rather than a fully generic fix. In __gic_init() the local GIC_VPE_TIMER_MAP register is read to find the boot-time routing of the local timer interrupt, and a chained handler is added to that CPU pin as well as the normal one. Signed-off-by: James Hogan <james.hogan@imgtec.com> Fixes: e9de688dac65 ("irqchip: mips-gic: Support local interrupts") Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Patchwork: https://patchwork.linux-mips.org/patch/9081/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 05 February 2015, 13:37:35 UTC
a409cae sit: fix some __be16/u16 mismatches Fixes following sparse warnings : net/ipv6/sit.c:1509:32: warning: incorrect type in assignment (different base types) net/ipv6/sit.c:1509:32: expected restricted __be16 [usertype] sport net/ipv6/sit.c:1509:32: got unsigned short net/ipv6/sit.c:1514:32: warning: incorrect type in assignment (different base types) net/ipv6/sit.c:1514:32: expected restricted __be16 [usertype] dport net/ipv6/sit.c:1514:32: got unsigned short net/ipv6/sit.c:1711:38: warning: incorrect type in argument 3 (different base types) net/ipv6/sit.c:1711:38: expected unsigned short [unsigned] [usertype] value net/ipv6/sit.c:1711:38: got restricted __be16 [usertype] sport net/ipv6/sit.c:1713:38: warning: incorrect type in argument 3 (different base types) net/ipv6/sit.c:1713:38: expected unsigned short [unsigned] [usertype] value net/ipv6/sit.c:1713:38: got restricted __be16 [usertype] dport Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 February 2015, 08:43:14 UTC
6776514 ipv6: fix sparse errors in ip6_make_flowlabel() include/net/ipv6.h:713:22: warning: incorrect type in assignment (different base types) include/net/ipv6.h:713:22: expected restricted __be32 [usertype] hash include/net/ipv6.h:713:22: got unsigned int include/net/ipv6.h:719:25: warning: restricted __be32 degrades to integer include/net/ipv6.h:719:22: warning: invalid assignment: ^= include/net/ipv6.h:719:22: left side has type restricted __be32 include/net/ipv6.h:719:22: right side has type unsigned int Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 February 2015, 08:42:28 UTC
2ce1ee1 net: remove some sparse warnings netdev_adjacent_add_links() and netdev_adjacent_del_links() are static. queue->qdisc has __rcu annotation, need to use RCU_INIT_POINTER() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 February 2015, 08:41:17 UTC
f4575d3 flow_keys: n_proto type should be __be16 (struct flow_keys)->n_proto is in network order, use proper type for this. Fixes following sparse errors : net/core/flow_dissector.c:139:39: warning: incorrect type in assignment (different base types) net/core/flow_dissector.c:139:39: expected unsigned short [unsigned] [usertype] n_proto net/core/flow_dissector.c:139:39: got restricted __be16 [assigned] [usertype] proto net/core/flow_dissector.c:237:23: warning: incorrect type in assignment (different base types) net/core/flow_dissector.c:237:23: expected unsigned short [unsigned] [usertype] n_proto net/core/flow_dissector.c:237:23: got restricted __be16 [assigned] [usertype] proto Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: e0f31d849867 ("flow_keys: Record IP layer protocol in skb_flow_dissect()") Signed-off-by: David S. Miller <davem@davemloft.net> 05 February 2015, 08:40:22 UTC
d1e158e ip6_gre: fix endianness errors in ip6gre_err info is in network byte order, change it back to host byte order before use. In particular, the current code sets the MTU of the tunnel to a wrong (too big) value. Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 February 2015, 08:33:10 UTC
f31ec95 qlcnic: Fix NAPI poll routine for Tx completion After d75b1ade567f ("net: less interrupt masking in NAPI") driver's NAPI poll routine is expected to return exact budget value if it wants to be re-called. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Fixes: d75b1ade567f ("net: less interrupt masking in NAPI") Signed-off-by: David S. Miller <davem@davemloft.net> 05 February 2015, 08:24:08 UTC
2d926c1 hrtimer: Fix incorrect tai offset calculation for non high-res timer systems I noticed some CLOCK_TAI timer test failures on one of my less-frequently used configurations. And after digging in I found in 76f4108892d9 (Cleanup hrtimer accessors to the timekepeing state), the hrtimer_get_softirq_time tai offset calucation was incorrectly rewritten, as the tai offset we return shold be from CLOCK_MONOTONIC, and not CLOCK_REALTIME. This results in CLOCK_TAI timers expiring early on non-highres capable machines. This patch fixes the issue, calculating the tai time properly from the monotonic base. Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable <stable@vger.kernel.org> # 3.17+ Link: http://lkml.kernel.org/r/1423097126-10236-1-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 05 February 2015, 07:39:37 UTC
cf180b8 amd-xgbe: Set RSS enablement based on hardware features The RSS support requires enablement based on the features reported by the hardware. The setting of this flag is missing. Add support to set the RSS enablement flag based on the reported hardware features. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 February 2015, 04:31:51 UTC
211fcf6 amd-xgbe: Adjust for zero-based traffic class count The number of traffic classes reported by the hardware is zero-based so increment the value returned to get an actual count. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 February 2015, 04:28:14 UTC
b057df2 cls_api.c: Fix dumping of non-existing actions' stats. In tcf_exts_dump_stats(), ensure that exts->actions is not empty before accessing the first element of that list and calling tcf_action_copy_stats() on it. This fixes some random segvs when adding filters of type "basic" with no particular action. This also fixes the dumping of those "no-action" filters, which more often than not made calls to tcf_action_copy_stats() fail and consequently netlink attributes added by the caller to be removed by a call to nla_nest_cancel(). Fixes: 33be62715991 ("net_sched: act: use standard struct list_head") Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 February 2015, 04:26:12 UTC
3725a26 pkt_sched: fq: avoid hang when quantum 0 Configuring fq with quantum 0 hangs the system, presumably because of a non-interruptible infinite loop. Either way quantum 0 does not make sense. Reproduce with: sudo tc qdisc add dev lo root fq quantum 0 initial_quantum 0 ping 127.0.0.1 Signed-off-by: Kenneth Klette Jonassen <kennetkl@ifi.uio.no> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 February 2015, 04:07:39 UTC
3da5ab5 Btrfs: add missing blk_finish_plug in btrfs_sync_log() Add missing blk_finish_plug in btrfs_sync_log() Signed-off-by: Forrest Liu <forrestl@synology.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com> 05 February 2015, 02:02:37 UTC
7f551b1 drm/cirrus: Limit modes depending on bpp option The commit [8975626ea35a: drm/cirrus: allow 32bpp framebuffers for cirrus drm] broke X modesetting driver because cirrus driver still provides the full list of modes up to 1280x1024 while the 32bpp can support only up to 800x600. We might be able to filter out the invalid modes in mode_valid callback, but unfortunately the bpp in question can't be referred there for now (let me know if there is a better way to retrieve the bpp for the probed fb). So, instead, this patch adds the bpp module option to specify the maximal bpp explicitly and limits the resolutions in get_modes depending on its value. The default value is set to 24 so that the existing stuff keeps working. If you need a new 32bpp feature, specify cirrus.bpp=32 option explicitly. Fixes: 8975626ea35a ('drm/cirrus: allow 32bpp framebuffers for cirrus drm') Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com> 05 February 2015, 00:39:00 UTC
db27ebb net: rds: use correct size for max unacked packets and bytes Max unacked packets/bytes is an int while sizeof(long) was used in the sysctl table. This means that when they were getting read we'd also leak kernel memory to userspace along with the timeout values. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 February 2015, 00:07:27 UTC
5201aa4 vhost/net: fix up num_buffers endian-ness In virtio 1.0 mode, when mergeable buffers are enabled on a big-endian host, num_buffers wasn't byte-swapped correctly, so large incoming packets got corrupted. To fix, fill it in within hdr - this also makes sure it gets the correct type. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 February 2015, 21:59:31 UTC
75300ad gianfar: correct the bad expression while writing bit-pattern This patch correct the bad expression while writing the bit-pattern from software's buffer to hardware registers. Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 February 2015, 21:55:24 UTC
06b19b1 net: usb: sr9700: Use 'SR_' prefix for the common register macros The commone register macors (e.g. RSR) is too commont to drivers, it may be conflict with the architectures (e.g. xtensa, sh). The related warnings (with allmodconfig under xtensa): CC [M] drivers/net/usb/sr9700.o In file included from drivers/net/usb/sr9700.c:24:0: drivers/net/usb/sr9700.h:65:0: warning: "RSR" redefined #define RSR 0x06 ^ In file included from ./arch/xtensa/include/asm/bitops.h:22:0, from include/linux/bitops.h:36, from include/linux/kernel.h:10, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/net/usb/sr9700.c:13: ./arch/xtensa/include/asm/processor.h:190:0: note: this is the location of the previous definition #define RSR(v,sr) __asm__ __volatile__ ("rsr %0,"__stringify(sr) : "=a"(v)); ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 February 2015, 21:53:02 UTC
d426a84 Merge remote-tracking branches 'spi/fix/fsl-dspi' and 'spi/fix/imx' into spi-linus 04 February 2015, 20:57:31 UTC
5ee0e96 Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "Three small cifs fixes. One fixes a hang under stress, and the other two are security related" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix MUST SecurityFlags filtering Complete oplock break jobs before closing file handle cifs: use memzero_explicit to clear stack buffer 04 February 2015, 18:22:08 UTC
5659c0e Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: "A number of ARM fixes, the biggest is fixing a regression caused by appended DT blobs exceeding 64K, causing the decompressor fixup code to fail to patch the DT blob. Another important fix is for the ASID allocator from Will Deacon which prevents some rare crashes seen on some systems. Lastly, there's a build fix for v7M systems when printk support is disabled. The last two remaining fixes are more cosmetic - the IOMMU one prevents an annoying harmless warning message, and we disable the kernel strict memory permissions on non-MMU which can't support it anyway" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8299/1: mm: ensure local active ASID is marked as allocated on rollover ARM: 8298/1: ARM_KERNMEM_PERMS only works with MMU enabled ARM: 8295/1: fix v7M build for !CONFIG_PRINTK ARM: 8294/1: ATAG_DTB_COMPAT: remove the DT workspace's hardcoded 64KB size ARM: 8288/1: dma-mapping: don't detach devices without an IOMMU during teardown 04 February 2015, 17:42:55 UTC
c2d9f17 MIPS: Fix syscall_get_nr for the syscall exit tracing. Register 2 is alredy overwritten by the return value when syscall_trace_leave() is called. Signed-off-by: Lars Persson <larper@axis.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9187/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 04 February 2015, 15:40:09 UTC
26f7c4b MIPS: elf2ecoff: Ignore PT_MIPS_ABIFLAGS program headers. These are generated by very recent toolchains and result in an error message when attenpting to convert a kernel from ELF to ECOFF. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 04 February 2015, 13:42:12 UTC
06a40ed MIPS: elf2ecoff: Rewrite main processing loop to switch. The if construct was getting hard to read and would be getting even more complex with the next bug fix. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 04 February 2015, 13:42:06 UTC
4c122f4 Merge branch 'virtio_net_ufo' Vladislav Yasevich says: ==================== Restore UFO support to virtio_net devices commit 3d0ad09412ffe00c9afa201d01effdb6023d09b4 Author: Ben Hutchings <ben@decadent.org.uk> Date: Thu Oct 30 18:27:12 2014 +0000 drivers/net: Disable UFO through virtio Turned off UFO support to virtio-net based devices due to issues with IPv6 fragment id generation for UFO packets. The issue was that IPv6 UFO/GSO implementation expects the fragment id to be supplied in skb_shinfo(). However, for packets generated by the VMs, the fragment id is not supplied which causes all IPv6 fragments to have the id of 0. The problem is that turning off UFO support on tap/macvtap as well as virtio devices caused issues with migrations. Migrations would fail when moving a vm from a kernel supporting expecting UFO to work to the newer kernels that disabled UFO. This series provides a partial solution to address the migration issue. The series allows us to track whether skb_shinfo()->ip6_frag_id has been set by treating value of 0 as unset. This lets GSO code to generate fragment ids if they are necessary (ex: packet was generated by VM or packet socket). Since v3: - Resolved build issue when IPv6 is a module. - Removed trailing white space. Since v2: - Rebase and rebuild to make sure everything works. No changes to the patches were done. Since v1: - Removed the skb bit and use value of 0 as tracker. - Used Eric's suggestion to set fragment id as 0x80000000 if id generation procedure yeilded a 0 result. - Consolidated ipv6 id genration code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 04 February 2015, 07:06:49 UTC
e3e3c42 Revert "drivers/net: Disable UFO through virtio" This reverts commit 3d0ad09412ffe00c9afa201d01effdb6023d09b4. Now that GSO functionality can correctly track if the fragment id has been selected and select a fragment id if necessary, we can re-enable UFO on tap/macvap and virtio devices. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 February 2015, 07:06:43 UTC
72f6510 Revert "drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets" This reverts commit 5188cd44c55db3e92cd9e77a40b5baa7ed4340f7. Now that GSO layer can track if fragment id has been selected and can allocate one if necessary, we don't need to do this in tap and macvtap. This reverts most of the code and only keeps the new ipv6 fragment id generation function that is still needed. Fixes: 3d0ad09412ff (drivers/net: Disable UFO through virtio) Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 February 2015, 07:06:43 UTC
0508c07 ipv6: Select fragment id during UFO segmentation if not set. If the IPv6 fragment id has not been set and we perform fragmentation due to UFO, select a new fragment id. We now consider a fragment id of 0 as unset and if id selection process returns 0 (after all the pertrubations), we set it to 0x80000000, thus giving us ample space not to create collisions with the next packet we may have to fragment. When doing UFO integrity checking, we also select the fragment id if it has not be set yet. This is stored into the skb_shinfo() thus allowing UFO to function correclty. This patch also removes duplicate fragment id generation code and moves ipv6_select_ident() into the header as it may be used during GSO. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 February 2015, 07:06:43 UTC
40767b0 sched/deadline: Fix deadline parameter modification handling Commit 67dfa1b756f2 ("sched/deadline: Implement cancel_dl_timer() to use in switched_from_dl()") removed the hrtimer_try_cancel() function call out from init_dl_task_timer(), which gets called from __setparam_dl(). The result is that we can now re-init the timer while its active -- this is bad and corrupts timer state. Furthermore; changing the parameters of an active deadline task is tricky in that you want to maintain guarantees, while immediately effective change would allow one to circumvent the CBS guarantees -- this too is bad, as one (bad) task should not be able to affect the others. Rework things to avoid both problems. We only need to initialize the timer once, so move that to __sched_fork() for new tasks. Then make sure __setparam_dl() doesn't affect the current running state but only updates the parameters used to calculate the next scheduling period -- this guarantees the CBS functions as expected (albeit slightly pessimistic). This however means we need to make sure __dl_clear_params() needs to reset the active state otherwise new (and tasks flipping between classes) will not properly (re)compute their first instance. Todo: close class flipping CBS hole. Todo: implement delayed BW release. Reported-by: Luca Abeni <luca.abeni@unitn.it> Acked-by: Juri Lelli <juri.lelli@arm.com> Tested-by: Luca Abeni <luca.abeni@unitn.it> Fixes: 67dfa1b756f2 ("sched/deadline: Implement cancel_dl_timer() to use in switched_from_dl()") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Kirill Tkhai <tkhai@yandex.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20150128140803.GF23038@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> 04 February 2015, 06:42:48 UTC
135818b Merge branch 'liblockdep-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux into core/urgent Pull liblockdep fixes from Sasha Levin. Signed-off-by: Ingo Molnar <mingo@kernel.org> 04 February 2015, 05:57:24 UTC
dc6d684 Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband reverts from Roland Dreier: "Last minute InfiniBand/RDMA changes for 3.19: - Revert IPoIB driver back to 3.18 state. We had a number of fixes go into 3.19, but they introduced regressions. We tried to get everything fixed up but ran out of time, so we'll try again for 3.20. - Similarly, turn off the new "extended query port" verb. Late in the cycle we realized the ABI is not quite right, and rather than freeze something in a rush and make a mistake, we'll take a bit more time and get it right in 3.20" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/core: Temporarily disable ex_query_device uverb Revert "IPoIB: Consolidate rtnl_lock tasks in workqueue" Revert "IPoIB: Make the carrier_on_task race aware" Revert "IPoIB: fix MCAST_FLAG_BUSY usage" Revert "IPoIB: fix mcast_dev_flush/mcast_restart_task race" Revert "IPoIB: change init sequence ordering" Revert "IPoIB: Use dedicated workqueues per interface" Revert "IPoIB: Make ipoib_mcast_stop_thread flush the workqueue" Revert "IPoIB: No longer use flush as a parameter" 04 February 2015, 04:12:57 UTC
59acf65 Merge tag 'md/3.19-fixes' of git://neil.brown.name/md Pull two fixes for md from Neil Brown: - Another live lock, needs backporting - work-around false positive with new warnings. * tag 'md/3.19-fixes' of git://neil.brown.name/md: md/bitmap: fix a might_sleep() warning. md/raid5: fix another livelock caused by non-aligned writes. 04 February 2015, 03:54:57 UTC
06cf35f PCI: Handle read-only BARs on AMD CS553x devices Some AMD CS553x devices have read-only BARs because of a firmware or hardware defect. There's a workaround in quirk_cs5536_vsa(), but it no longer works after 36e8164882ca ("PCI: Restore detection of read-only BARs"). Prior to 36e8164882ca, we filled in res->start; afterwards we leave it zeroed out. The quirk only updated the size, so the driver tried to use a region starting at zero, which didn't work. Expand quirk_cs5536_vsa() to read the base addresses from the BARs and hard-code the sizes. On Nix's system BAR 2's read-only value is 0x6200. Prior to 36e8164882ca, we interpret that as a 512-byte BAR based on the lowest-order bit set. Per datasheet sec 5.6.1, that BAR (MFGPT) requires only 64 bytes; use that to avoid clearing any address bits if a platform uses only 64-byte alignment. [bhelgaas: changelog, reduce BAR 2 size to 64] Fixes: 36e8164882ca ("PCI: Restore detection of read-only BARs") Link: https://bugzilla.kernel.org/show_bug.cgi?id=85991#c4 Link: http://support.amd.com/TechDocs/31506_cs5535_databook.pdf Link: http://support.amd.com/TechDocs/33238G_cs5536_db.pdf Reported-and-tested-by: Nix <nix@esperi.org.uk> Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v.2.6.27+ 04 February 2015, 02:28:02 UTC
9c9ce76 aio: annotate aio_read_event_ring for sleep patterns Under CONFIG_DEBUG_ATOMIC_SLEEP=y, aio_read_event_ring() will throw warnings like the following due to being called from wait_event context: WARNING: CPU: 0 PID: 16006 at kernel/sched/core.c:7300 __might_sleep+0x7f/0x90() do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff810d85a3>] prepare_to_wait_event+0x63/0x110 Modules linked in: CPU: 0 PID: 16006 Comm: aio-dio-fcntl-r Not tainted 3.19.0-rc6-dgc+ #705 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffffffff821c0372 ffff88003c117cd8 ffffffff81daf2bd 000000000000d8d8 ffff88003c117d28 ffff88003c117d18 ffffffff8109beda ffff88003c117cf8 ffffffff821c115e 0000000000000061 0000000000000000 00007ffffe4aa300 Call Trace: [<ffffffff81daf2bd>] dump_stack+0x4c/0x65 [<ffffffff8109beda>] warn_slowpath_common+0x8a/0xc0 [<ffffffff8109bf56>] warn_slowpath_fmt+0x46/0x50 [<ffffffff810d85a3>] ? prepare_to_wait_event+0x63/0x110 [<ffffffff810d85a3>] ? prepare_to_wait_event+0x63/0x110 [<ffffffff810bdfcf>] __might_sleep+0x7f/0x90 [<ffffffff81db8344>] mutex_lock+0x24/0x45 [<ffffffff81216b7c>] aio_read_events+0x4c/0x290 [<ffffffff81216fac>] read_events+0x1ec/0x220 [<ffffffff810d8650>] ? prepare_to_wait_event+0x110/0x110 [<ffffffff810fdb10>] ? hrtimer_get_res+0x50/0x50 [<ffffffff8121899d>] SyS_io_getevents+0x4d/0xb0 [<ffffffff81dba5a9>] system_call_fastpath+0x12/0x17 ---[ end trace bde69eaf655a4fea ]--- There is not actually a bug here, so annotate the code to tell the debug logic that everything is just fine and not to fire a false positive. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> 04 February 2015, 00:29:05 UTC
0f98c38 Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull final block layer fixes from Jens Axboe: "Unfortunately the hctx/ctx lifetime fix from last pull had some issues. This pull request contains a revert of the problematic commit, and a proper rewrite of it. The rewrite has been tested by the users complaining about the regression, and it works fine now. Additionally, I've run testing on all the blk-mq use cases for it and it passes. So we should definitely get this into 3.19, to avoid regression for some cases" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: release mq's kobjects in blk_release_queue() Revert "blk-mq: fix hctx/ctx kobject use-after-free" 03 February 2015, 19:36:57 UTC
0dc17d1 Merge tag 'gpio-v3.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio fixes from Linus Walleij: "Yet more GPIO fixes for the v3.19 series. There is a high bug-spot activity in GPIO this merge window, much due to Johan Hovolds spearheading into actually exercising the removal path for GPIO chips, something that was never really exercised before. The other two fixes are augmenting erroneous behaviours in two specific drivers for minor systems. Summary from signed tag: - Two fixes stabilizing that which was never stable before: removal of GPIO chips, now let's stop leaking memory. - Make sure OMAP IRQs are usable when the irqchip API is used orthogonally to the gpiochip API. - Provide a default GPIO base for the mcp23s08 driver" * tag 'gpio-v3.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: sysfs: fix memory leak in gpiod_sysfs_set_active_low gpio: sysfs: fix memory leak in gpiod_export_link gpio: mcp23s08: handle default gpio base gpio: omap: Fix bad device access with setup_irq() 03 February 2015, 19:26:54 UTC
ecb7b12 Merge branches 'ipoib' and 'odp' into for-next 03 February 2015, 17:29:25 UTC
7e36ef8 IB/core: Temporarily disable ex_query_device uverb Commit 5a77abf9a97a ("IB/core: Add support for extended query device caps") added a new extended verb to query the capabilities of RDMA devices, but the semantics of this verb are still under debate [1]. Don't expose this verb to userspace until the ABI is nailed down. [1] [PATCH v1 0/5] IB/core: extended query device caps cleanup for v3.19 http://www.spinics.net/lists/linux-rdma/msg22904.html Signed-off-by: Haggai Eran <haggaie@mellanox.com> Reviewed-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com> 03 February 2015, 17:29:11 UTC
3df2da9 Revert "ACPI / LPSS: introduce a 'proxy' device to power on LPSS for DMA" Revert commit 6c17ee44d524 (ACPI / LPSS: introduce a 'proxy' device to power on LPSS for DMA), as it introduced registration and probe ordering problems between devices on the LPSS that may lead to full hard system hang on boot in some cases. 03 February 2015, 13:29:43 UTC
58cc9c9 ASoC: sgtl5000: add delay before first I2C access To quote from section 1.3.1 of the data sheet: The SGTL5000 has an internal reset that is deasserted 8 SYS_MCLK cycles after all power rails have been brought up. After this time, communication can start ... 1.0us represents 8 SYS_MCLK cycles at the minimum 8.0 MHz SYS_MCLK. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org 03 February 2015, 13:08:41 UTC
8e64806 ARM: 8299/1: mm: ensure local active ASID is marked as allocated on rollover Commit e1a5848e3398 ("ARM: 7924/1: mm: don't bother with reserved ttbr0 when running with LPAE") removed the use of the reserved TTBR0 value for LPAE systems, since the ASID is held in the TTBR and can be updated atomicly with the pgd of the next mm. Unfortunately, this patch forgot to update flush_context, which deliberately avoids marking the local active ASID as allocated, since we used to switch via ASID zero and didn't need to allocate the ASID of the previous mm. The side-effect of this is that we can allocate the same ASID to the next mm and, between flushing the local TLB and updating TTBR0, we can perform speculative TLB fills for userspace nG mappings using the page table of the previous mm. The consequence of this is that the next mm can erroneously hit some mappings of the previous mm. Note that this was made significantly harder to hit by a391263cd84e ("ARM: 8203/1: mm: try to re-use old ASID assignments following a rollover") but is still theoretically possible. This patch fixes the problem by removing the code from flush_context that forces the allocated ASID to zero for the local CPU. Many thanks to the Broadcom guys for tracking this one down. Fixes: e1a5848e3398 ("ARM: 7924/1: mm: don't bother with reserved ttbr0 when running with LPAE") Cc: <stable@vger.kernel.org> # v3.14+ Reported-by: Raymond Ngun <rngun@broadcom.com> Tested-by: Raymond Ngun <rngun@broadcom.com> Reviewed-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 03 February 2015, 12:57:33 UTC
a02bb40 spi: imx: use pio mode for i.mx6dl For TKT238285 hardware issue which may cause txfifo store data twice can only be caught on i.mx6dl, we use pio mode instead of DMA mode on i.mx6dl. Fixes: f62caccd12c17e4 (spi: spi-imx: add DMA support) Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org 03 February 2015, 12:17:01 UTC
3e87523 sched/wait: Remove might_sleep() from wait_event_cmd() The patch e22b886a8a43 ("sched/wait: Add might_sleep() checks") introduced a bug in the raid5 subsystem. The function raid5_quiesce() (and resize_stripes()) uses the 'cmd' part to release and acquire a spinlock (so we call the sleep primitives in atomic context), and therefore we cannot do the might_sleep() check. Remove it. Fixes: e22b886a8a43 ("sched/wait: Add might_sleep() checks") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1502020935580.13510@file01.intranet.prod.int.rdu2.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 03 February 2015, 11:14:25 UTC
42b5212 xen-netback: stop the guest rx thread after a fatal error After commit e9d8b2c2968499c1f96563e6522c56958d5a1d0d (xen-netback: disable rogue vif in kthread context), a fatal (protocol) error would leave the guest Rx thread spinning, wasting CPU time. Commit ecf08d2dbb96d5a4b4bcc53a39e8d29cc8fef02e (xen-netback: reintroduce guest Rx stall detection) made this even worse by removing a cond_resched() from this path. Since a fatal error is non-recoverable, just allow the guest Rx thread to exit. This requires taking additional refs to the task so the thread exiting early is handled safely. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reported-by: Julien Grall <julien.grall@linaro.org> Tested-by: Julien Grall <julien.grall@linaro.org> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 February 2015, 03:39:04 UTC
5a2e87b net/mlx4_core: Fix kernel Oops (mem corruption) when working with more than 80 VFs Commit de966c592802 (net/mlx4_core: Support more than 64 VFs) was meant to allow up to 126 VFs. However, due to leaving MLX4_MFUNC_MAX too low, using more than 80 VFs resulted in memory corruptions (and Oopses) when more than 80 VFs were requested. In addition, the number of slaves was left too high. This commit fixes these issues. Fixes: de966c592802 ("net/mlx4_core: Support more than 64 VFs") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 February 2015, 03:38:04 UTC
c101cff isdn: off by one in connect_res() The bug here is that we use "Reject" as the index into the cau_t[] array in the else path. Since the cau_t[] has 9 elements if Reject == 9 then we are reading beyond the end of the array. My understanding of the code is that it's saying that if Reject is 1 or too high then that's invalid and we should hang up. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 February 2015, 03:33:18 UTC
3ae5582 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree, they are: 1) Validate hooks for nf_tables NAT expressions, otherwise users can crash the kernel when using them from the wrong hook. We already got one user trapped on this when configuring masquerading. 2) Fix a BUG splat in nf_tables with CONFIG_DEBUG_PREEMPT=y. Reported by Andreas Schultz. 3) Avoid unnecessary reroute of traffic in the local input path in IPVS that triggers a crash in in xfrm. Reported by Florian Wiessner and fixes by Julian Anastasov. 4) Fix memory and module refcount leak from the error path of nf_tables_newchain(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 03 February 2015, 03:30:53 UTC
e6b02be Documentation: Update netlink_mmap.txt Update netlink_mmap.txt wrt. commit 4682a0358639b29cf ("netlink: Always copy on mmap TX."). Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David S. Miller <davem@davemloft.net> 03 February 2015, 02:50:00 UTC
44ba582 sunvnet: set queue mapping when doing packet copies This patch fixes a bug where vnet_skb_shape() didn't set the already-selected queue mapping when a packet copy was required. This results in using the wrong queue index for stops/starts, hung tx queues and watchdog timeouts under heavy load. Signed-off-by: David L Stevens <david.stevens@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 February 2015, 02:20:35 UTC
61132bf qlge: Fix qlge_update_hw_vlan_features to handle if interface is down Currently qlge_update_hw_vlan_features() will always first put the interface down, then update features and then bring it up again. But it is possible to hit this code while the adapter is down and this causes a non-paired call to napi_disable(), which will get stuck. This patch fixes it by skipping these down/up actions if the interface is already down. Fixes: a45adbe8d352 ("qlge: Enhance nested VLAN (Q-in-Q) handling.") Cc: Harish Patil <harish.patil@qlogic.com> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 February 2015, 01:51:14 UTC
8664096 Merge tag 'drm-amdkfd-fixes-2015-02-02' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes Three small fixes that came up during last week, nothing scary: - Accidently incremented a counter instead of decrementing it (copy-paste error) - Module parameter of max num of queues must be at least 1 and not 0 - Don't do BUG() as a result from wrong user input * tag 'drm-amdkfd-fixes-2015-02-02' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: Don't create BUG due to incorrect user parameter drm/amdkfd: max num of queues can't be 0 drm/amdkfd: Fix bug in accounting of queues 03 February 2015, 01:21:11 UTC
92773fc Merge branch 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux into drm-fixes One last round of fixes for radeon for 3.19: - fix some fallout from the reservation object integration on the test/benchmark options - fix a crash in the gpu vm code if gfx init fails - fix a pll issue that leads to a blank screen on older IGP parts * 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix the crash in test functions drm/radeon: fix the crash in benchmark functions drm/radeon: properly set vm fragment size for TN/RL drm/radeon: don't init gpuvm if accel is disabled (v3) drm/radeon: fix PLLs on RS880 and older v2 03 February 2015, 01:20:39 UTC
92b712b drm/radeon: fix the crash in test functions radeon_copy_dma and radeon_copy_blit must be called with a valid reservation object. Otherwise a crash will be provoked. We borrow the object from vram BO. bug: https://bugs.freedesktop.org/show_bug.cgi?id=88464 Cc: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 02 February 2015, 16:39:36 UTC
3f5e1b4 drm/radeon: fix the crash in benchmark functions radeon_copy_dma and radeon_copy_blit must be called with a valid reservation object. Otherwise a crash will be provoked. We borrow the object from destination BO. bug: https://bugs.freedesktop.org/show_bug.cgi?id=88464 Cc: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 02 February 2015, 16:39:35 UTC
a124d06 drm/radeon: properly set vm fragment size for TN/RL Should be the same as cayman. We don't use VM by default on NI parts so this isn't critical. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 02 February 2015, 16:39:34 UTC
544143f drm/radeon: don't init gpuvm if accel is disabled (v3) If acceleration is disabled, it does not make sense to init gpuvm since nothing will use it. Moreover, if radeon_vm_init() gets called it uses accel to try and clear the pde tables, etc. which results in a bug. v2: handle vm_fini as well v3: handle bo_open/close as well Bug: https://bugs.freedesktop.org/show_bug.cgi?id=88786 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 02 February 2015, 16:39:33 UTC
72edd83 drm/radeon: fix PLLs on RS880 and older v2 This is a workaround for RS880 and older chips which seem to have an additional limit on the minimum PLL input frequency. v2: fix signed/unsigned warning bugs: https://bugzilla.kernel.org/show_bug.cgi?id=91861 https://bugzilla.kernel.org/show_bug.cgi?id=83461 Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 02 February 2015, 16:39:33 UTC
51ac3d2 PCI: Add NEC variants to Stratus ftServer PCIe DMI check NEC OEMs the same platforms as Stratus does, which have multiple devices on some PCIe buses under downstream ports. Link: https://bugzilla.kernel.org/show_bug.cgi?id=51331 Fixes: 1278998f8ff6 ("PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check)") Signed-off-by: Charlotte Richardson <charlotte.richardson@stratus.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.5+ CC: Myron Stowe <myron.stowe@redhat.com> 02 February 2015, 15:36:23 UTC
3a9794d sd: Fix max transfer length for 4k disks The following patch fixes an issue observed with 4k sector disks where the max_hw_sectors attribute was getting set too large in sd_revalidate_disk. Since sdkp->max_xfer_blocks is in units of SCSI logical blocks and queue_max_hw_sectors is in units of 512 byte blocks, on a 4k sector disk, every time we went through sd_revalidate_disk, we were taking the current value of queue_max_hw_sectors and increasing it by a factor of 8. Fix this by only shifting sdkp->max_xfer_blocks. Cc: stable@vger.kernel.org Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> 02 February 2015, 12:46:29 UTC
back to top