| 606135a | Linus Torvalds | 28 February 2007, 04:59:12 UTC | Linux 2.6.21-rc2 Too many changes for comfort since -rc1. Some missed merges, and some just annoyingly big fixes since. This is not how an -rc2 should look. Need to really calm things down! | 28 February 2007, 04:59:12 UTC |
| bb4c18c | David S. Miller | 26 February 2007, 22:55:06 UTC | [SPARC64]: Fix PCI interrupts on E450 et al. When the PCI controller OBP node lacks an interrupt-map and interrupt-map-mask property, we need to form the INO by hand. The PCI swizzle logic was not doing that properly. This was a regression added by the of_device code. Signed-off-by: David S. Miller <davem@davemloft.net> | 27 February 2007, 17:46:52 UTC |
| d3dcc2c | Linus Torvalds | 27 February 2007, 15:45:09 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart * master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] fix compile errors | 27 February 2007, 15:45:09 UTC |
| ce27002 | Linus Torvalds | 27 February 2007, 15:39:04 UTC | Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (52 commits) netxen: do_rom_fast_write error handling natsemi: Fix detection of vanilla natsemi cards net: remove a collection of unneeded #undef REALLY_SLOW_IO stuff chelsio: Fix non-NAPI compile cxgb3 - Feed Rx free list with pages cxgb3 - Recovery from HW starvation of response queue entries. cxgb3 - Unmap offload packets when they are freed cxgb3 - FW version update cxgb3 - private ioctl cleanup cxgb3 - manage sysfs attributes per port S2IO: Restoring the mac address in s2io_reset S2IO: Avoid printing the Enhanced statistics for Xframe I card. S2IO: Making LED off during LINK_DOWN notification. S2IO: Added a loadable parameter to enable or disable vlan stripping in frame. S2IO: Optimized the delay to wait for command completion S2IO: Fixes for MSI and MSIX qla3xxx: Bumping driver version number qla3xxx: Kernic Panic on pSeries under stress conditions qla3xxx: bugfix tx reset after stress conditions. qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send() ... | 27 February 2007, 15:39:04 UTC |
| 6c1586b | Linus Torvalds | 27 February 2007, 15:38:40 UTC | Merge branch 'jffs-maint' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'jffs-maint' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: remove the jffs MAINTAINERS entry | 27 February 2007, 15:38:40 UTC |
| f8dfdd5 | Stephen Hemminger | 26 February 2007, 22:51:56 UTC | netxen: do_rom_fast_write error handling Compiler warning spots real error! The function do_rom_fast_read called in do_rom_fast_write can fail and leave data1 unset. This causes a compile warning. The correct thing is to propagate the error out. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:38:33 UTC |
| 6eaf6fc | Adrian Bunk | 25 February 2007, 00:08:47 UTC | remove the jffs MAINTAINERS entry This patch removes the MAINTAINERS entry for the removed jffs filesystem. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:36:47 UTC |
| 36c843d | Mark Brown | 25 February 2007, 15:37:27 UTC | natsemi: Fix detection of vanilla natsemi cards Bob Tracy <rct@gherkin.frus.com> reported that the addition of support for Aculab E1/T1 cPCI carrier cards broke detection of vanilla natsemi cards. This patch fixes that: the problem is that the driver-specific ta in the PCI device table is an index into a second table and this had not been updated for the vanilla cards. This patch fixes the problem minimally. Signed-Off-By: Mark Brown <broonie@sirena.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:30:43 UTC |
| b882add | Alan | 20 February 2007, 18:08:57 UTC | net: remove a collection of unneeded #undef REALLY_SLOW_IO stuff Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:30:42 UTC |
| 54d3e56 | Roland Dreier | 26 February 2007, 22:58:49 UTC | chelsio: Fix non-NAPI compile Chelsio without NAPI enabled has been broken (won't compile) since 3de00b89 ("chelsio: NAPI speed improvement"): drivers/net/chelsio/sge.c: In function `t1_interrupt`: drivers/net/chelsio/sge.c:1716: error: `Q` undeclared (first use in this function) The change below seems to add back in the declaration and initialization of `Q` that was removed by mistake, and at least makes the driver compile for me, although I have no hardware and hence no way to test whether this actually works. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:27:13 UTC |
| e0994eb | Divy Le Ray | 25 February 2007, 00:44:17 UTC | cxgb3 - Feed Rx free list with pages Populate Rx free list with pages. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:27:12 UTC |
| bae73f4 | Divy Le Ray | 25 February 2007, 00:44:12 UTC | cxgb3 - Recovery from HW starvation of response queue entries. Improve the traffic recovery after the HW ran out of response queue entries. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:27:12 UTC |
| 99d7cf3 | Divy Le Ray | 25 February 2007, 00:44:06 UTC | cxgb3 - Unmap offload packets when they are freed Offload packets may be DMAed long after their SGE Tx descriptors are done so they must remain mapped until they are freed rather than until their descriptors are freed. Unmap such packets through an skb destructor. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:27:12 UTC |
| 75d8626 | Divy Le Ray | 26 February 2007, 00:32:37 UTC | cxgb3 - FW version update Update FW version to 3.2 Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:27:12 UTC |
| 1825494 | Divy Le Ray | 25 February 2007, 00:43:56 UTC | cxgb3 - private ioctl cleanup Clean up some private ioctls. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:27:12 UTC |
| 896392e | Divy Le Ray | 25 February 2007, 00:43:50 UTC | cxgb3 - manage sysfs attributes per port sysfs attributes are now managed per port, no longer per adapter. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:27:12 UTC |
| d8d70ca | Sivakumar Subramani | 24 February 2007, 07:04:24 UTC | S2IO: Restoring the mac address in s2io_reset - Restore in s2io_reset, the mac address assigned during s2io_open. Earlier, it was getting overwritten to the factory default (read from the eeprom) and subsequently dropping received frames. - Fixed the typo in calling rtnl_unlock in s2io_set_link function. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:27:12 UTC |
| fa1f0cb | Sivakumar Subramani | 24 February 2007, 07:03:22 UTC | S2IO: Avoid printing the Enhanced statistics for Xframe I card. - Enhanced Statistics are supported only for Xframe II (Herculas) card. Add condition check such Enhanced statistics will included only in the case of Xframe II card. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:27:11 UTC |
| ac1f90d | Sivakumar Subramani | 24 February 2007, 07:01:31 UTC | S2IO: Making LED off during LINK_DOWN notification. - Turning off LED for LINK_DOWN notification - Return from rxd_owner_bit_reset function if call to set_rxd_buffer_pointer fails with ENOMEM Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:27:11 UTC |
| 926930b | Sivakumar Subramani | 24 February 2007, 06:59:39 UTC | S2IO: Added a loadable parameter to enable or disable vlan stripping in frame. - Added code to not to strip vlan tag when driver is in promiscuous mode - Added module loadable parameter 'vlan_tag_strip" through which user can enable or disable vlan stripping irrespective of mode ( promiscuous or non-promiscuous ). Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:27:11 UTC |
| 9fc93a4 | Sivakumar Subramani | 24 February 2007, 06:57:32 UTC | S2IO: Optimized the delay to wait for command completion - Optimized delay to wait for command completion so as to reduce the initialization wait time. - Disable differentiated services steering. By default RMAC is configured to steer traffic with certain DS codes to other queues. Driver must initialize the DS memory to 0 to make sure that DS steering will not be used by default. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:27:11 UTC |
| fb6a825 | Sivakumar Subramani | 24 February 2007, 06:51:50 UTC | S2IO: Fixes for MSI and MSIX - Added debug statements to print a debug message if the MSI/MSI-X vector (or) data is zero. - This patch removes the code that will enable NAPI for the case of single ring and MSI-X / MSI case. There are some issue in the enabling NAPI with MSI/MSI-X. So we are turning off NAPI in the case of MSI/MSI-X. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:27:11 UTC |
| ed227dc | Benjamin Li | 26 February 2007, 19:06:43 UTC | qla3xxx: Bumping driver version number Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:21:45 UTC |
| e8f4df2 | Benjamin Li | 26 February 2007, 19:06:42 UTC | qla3xxx: Kernic Panic on pSeries under stress conditions To reproduce this panic consistently, we run an intensive network application like 'netperf'. After waiting for a couple of seconds, you will see a stack trace and a kernel panic where we are calling pci_unmap_single() in ql_poll(). Changes: 1) Check the flags on the Response MAC IO Control block to check for errors 2) Ensure that if we are on the 4022 we only use one segment 3) Before, we were reading the memory mapped producer index register everytime we iterated in the loop when clearing the queue. We should only be iterating to a known point, not as the producer index is being updated. Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:21:45 UTC |
| 63b66d1 | Ron Mercer | 26 February 2007, 19:06:41 UTC | qla3xxx: bugfix tx reset after stress conditions. To Reproduce the Problem: To reproduce this panic consistently, we run an intensive network application like 'netperf' and then switch to a different console. After waiting for a couple of seconds, you will see a tx reset has occured. Reason: We enable interrupts even if we were not running. Solution: Now we will enable interrupts only after we are ready to give up the poll routine. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:21:44 UTC |
| 0f8ab89 | Benjamin Li | 26 February 2007, 19:06:40 UTC | qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send() pci_map_single() could fail. We need to properly check the return code from pci_map_single(). If we can not properly map this address, then we should cleanup and return the proper return code. Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:21:44 UTC |
| 3e71f6d | Ron Mercer | 26 February 2007, 19:06:39 UTC | qla3xxx: bugfix: Fixed jumbo frame handling for 3032 chip. The scatter/gather lists were not being build correctly. When large frames spanned several buffers the chip would panic. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:21:44 UTC |
| 9791633 | Ron Mercer | 26 February 2007, 19:06:38 UTC | qla3xxx: Clean up receive process. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:21:44 UTC |
| 1357bfc | Ron Mercer | 26 February 2007, 19:06:37 UTC | qla3xxx: Dynamically size the rx buffer queue based on the MTU. This change removes use of constants for rx buffer queue size and instead calculates the queue length based on what he MTU is set to. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:21:44 UTC |
| cb8bac1 | Ron Mercer | 26 February 2007, 19:06:36 UTC | qla3xxx: Remove API to change MTU. This network device driver shares the same hardware as the qla4xxx iSCSI driver. Changing the MTU via the device interface will cause qla4xxx to crash as there is no way to make notification. Users wishing to change the MTU must do so using an iSCSI utility such as Qlogic SanSurfer. This forces the user to unload/reload this network device driver after the MTU value has been changed in flash. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:21:44 UTC |
| 04f1077 | Benjamin Li | 26 February 2007, 19:06:35 UTC | qla3xxx: Fix deadlock issue on error paths 1) Fix deadlock issue when in QL_RESET_ACTIVE state and traversing through the Link State Machine 2) Fix deadlock issue when ethtool would call ql_get_settings() 3) Fix deadlock issue when adaptor is ifup'ed but adaptor fails to initialize Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:21:44 UTC |
| cd238fa | Benjamin Li | 26 February 2007, 19:06:33 UTC | qla3xxx: Changed to use netdev_alloc_skb() from dev_alloc_skb Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:21:43 UTC |
| d2d76b8 | Benjamin Li | 26 February 2007, 19:06:32 UTC | qla3xxx: Remove unnecessary memset() in qla3xxx_send() We do not need to zero out the 64 byte MAC request I/O control block. By zeroing out the control block and setting it to proper fields is redundant work. This is because in the qla3xxx_send() function we will already set the proper fields in this structure. The unused fields are not looked at by the hardware and do not need to be zeroed out. Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:21:43 UTC |
| 546faf0 | Benjamin Li | 26 February 2007, 19:06:31 UTC | qla3xxx: Return proper error codes when the 4022/4032 is being probed The return code was not properly set when when allocating memory or mapping memory failed. Depending on the stack, the return code would sometimes return 0, which indicates everything was ok, when in fact there was an error. This would cause trouble when the module was removed. Now, we will pass back the proper return code when an error occurs during the PCI probe. Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:21:43 UTC |
| 908b637 | Ralf Baechle | 26 February 2007, 19:52:06 UTC | Alignment in mv643xx_eth The driver contains this little piece of candy: #if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_NOT_COHERENT_CACHE) #define ETH_DMA_ALIGN L1_CACHE_BYTES #else #define ETH_DMA_ALIGN 8 #endif Any reason why we're not using dma_get_cache_alignment() instead? Ralf Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:21:25 UTC |
| 92b0c4e | Ralf Baechle | 26 February 2007, 01:50:34 UTC | sgiseeq: Don't include unnecessary headerfiles. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:21:25 UTC |
| e9eb70c | Timur Tabi | 21 February 2007, 20:40:12 UTC | ucc_geth: use of_get_mac_address() Update ucc_geth_probe() to use function of_get_mac_address() to obtain the MAC address. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:21:25 UTC |
| f19841f | Stephen Hemminger | 23 February 2007, 22:04:54 UTC | skge: comma consistency Use comma's consistently. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:04 UTC |
| c4cd29d | Stephen Hemminger | 23 February 2007, 22:03:00 UTC | skge: fix transmitter flow control It looks like the skge driver inherited another bug from the sk98lin code. If I send from 1000mbit port to a machine on 100mbit port, the switch should be doing hardware flow control, but no pause frames show up in the statistics. This is the analog of the recent sky2 fixes. The device needs to listen for multicast pause frames and then not discard them. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:04 UTC |
| 9dc6f0e | Brice Goglin | 21 February 2007, 17:05:17 UTC | myri10ge: workaround buggy adopted firmwares Work around a bug which occurs when adopting firmware versions 1.4.4 though 1.4.11 where broadcasts are filtered as if they were multicasts. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:04 UTC |
| b1adf03 | Amit S. Kale | 21 February 2007, 14:54:06 UTC | NetXen: Driver ifconfig fix Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:04 UTC |
| 9de0661 | Amit S. Kale | 21 February 2007, 14:37:06 UTC | NetXen: Driver unload fixes Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:04 UTC |
| fa30248 | Linas Vepstas | 20 February 2007, 22:45:27 UTC | spidernet: maintainership Update driver support contact info. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:04 UTC |
| 7376e73 | Linas Vepstas | 20 February 2007, 22:42:59 UTC | spidernet: janitorial, typos Janitorial patch. Undo long lines, fix typo in err msg. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:03 UTC |
| 5c8e98f | Linas Vepstas | 20 February 2007, 22:41:59 UTC | spidernet: transmit race Multiple threads performing a transmit can race into the spidernet tx ring cleanup code. This puts the relevant check under a lock. Signed-off-by: Linas Vepstas <lins@austin.ibm.com> Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:03 UTC |
| d9c199e | Linas Vepstas | 20 February 2007, 22:41:03 UTC | spidernet: fix racy double-free of skb It appears that under certain circumstances, a race will result in a double-free of an skb. This patch null's out the skb pointer upon the skb free, avoiding the inadvertent deref of bogus data. The next patch fixes the actual race. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:03 UTC |
| 4cb6f9e | Linas Vepstas | 20 February 2007, 22:40:06 UTC | spidernet: separate hardware state from driver state. This patch separates the hardware descriptor state from the driver descriptor state, per (old) suggestion from Ben Herrenschmidt. This compiles and boots and seems to work. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:03 UTC |
| 4b23a55 | Jens Osterkamp | 20 February 2007, 22:39:13 UTC | spidernet: move medium variable into card struct This moves the medium variable into the spidernet card structure. It renames the GMII_ variables to BCM54XX specific ones. Signed-off-by: Jens Osterkamp <jens@de.ibm.com> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:03 UTC |
| fc8e13d | Ishizaki Kou | 20 February 2007, 22:37:42 UTC | spidernet: remove txram full logging This patches removes logging for SPIDER_NET_GTMFLLINT interrupts. Since the interrupts are not irregular, and they happen frequently when using 100Mbps network switches. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:03 UTC |
| 3342cf0 | Kou Ishizaki | 20 February 2007, 22:36:14 UTC | spidernet: spidernet: add support for Celleb This patch adds or changes some HW specific settings for spider_net on Celleb. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:03 UTC |
| 3cf761d | Kou Ishizaki | 20 February 2007, 22:34:50 UTC | spidernet: load firmware when open This patch moves calling init_firmware() from spider_net_probe() to spider_net_open() so as to use the driver by built-in. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:03 UTC |
| abdb66b | Kou Ishizaki | 20 February 2007, 22:33:41 UTC | spidernet: autoneg support for Celleb Add auto negotiation support for Celleb. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:02 UTC |
| d406eaf | Linas Vepstas | 20 February 2007, 22:32:00 UTC | spidernet: compile break. As of 2.6.20-git4, the spider_net driver does not compile. This appears to be due to some archaic usage involving kobjects. It also fixes a nasty double-free during ifdown of the interface. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:02 UTC |
| eb5b5b2 | Jens Osterkamp | 20 February 2007, 22:30:50 UTC | sungem_phy: support bcm5461 phy, autoneg. This version moves the medium variable to the card specific structure and changes the GMII_* to BCM54XX_* #defines. This patch adds improved version of enable_fiber for both the 5421 and the 5461 phy. It is now possible to specify with these wether you want autonegotiation or not. This is needed for bladecenter switches where some expect autonegotiation and some dont seem to like this at all. Depending on this flag it sets phy->autoneg accordingly for the fiber mode. More importantly it implements proper read_link and poll_link functions for both phys which can handle both copper and fiber mode by determining the medium first and then branching to the required functions. For fiber they all work fine, for copper they are not tested but return the result of the genmii_* function anyway which is supposed to work. The patch moves the genmii_* functions around to avoid foreward declarations. Signed-off-by: Jens Osterkamp <jens@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:02 UTC |
| 6fedae1 | Ayaz Abdulla | 20 February 2007, 08:34:44 UTC | forcedeth: fix checksum feature in mcp65 This patch removes checksum offload feature in mcp65 chipsets as they are not supported in hw. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:02 UTC |
| caf9646 | Ayaz Abdulla | 20 February 2007, 08:34:40 UTC | forcedeth: disable msix There seems to be an issue when both MSI-X is enabled and NAPI is configured. This patch disables MSI-X until the issue is root caused. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:02 UTC |
| e0379a1 | Ayaz Abdulla | 20 February 2007, 08:34:30 UTC | forcedeth: fixed missing call in napi poll The napi poll routine was missing the call to the optimized rx process routine. This patch adds the missing call for the optimized path. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:16:02 UTC |
| 420e852 | Jeff Garzik | 24 February 2007, 22:02:16 UTC | [netdrvr] tc35815: fix obvious bugs * clear_page() use is wrong. We might have multiple pages. Use memset() instead. * Call pci_unregister_driver() in module exit. Signed-off-by: Jeff Garzik <jeff@garzik.org> | 27 February 2007, 09:11:05 UTC |
| e047d1c | Ryusuke Konishi | 27 February 2007, 05:13:02 UTC | [AGPGART] fix compile errors This fixes the following compile failures of agpgart drivers. These errors were inserted by the recent AGPGART constification patch. drivers/char/agp/uninorth-agp.c:492: error: expected '{' before 'const' drivers/char/agp/uninorth-agp.c:517: error: expected '{' before 'const' drivers/char/agp/uninorth-agp.c: In function 'agp_uninorth_probe': drivers/char/agp/uninorth-agp.c:634: error: 'u3_agp_driver' undeclared (first use in this function) drivers/char/agp/uninorth-agp.c:634: error: (Each undeclared identifier is reported only once drivers/char/agp/uninorth-agp.c:634: error: for each function it appears in.) drivers/char/agp/uninorth-agp.c:636: error: 'uninorth_agp_driver' undeclared (first use in this function) Signed-off-by: Ryusuke Konishi <ryusuke@osrg.net> Signed-off-by: Dave Jones <davej@redhat.com> | 27 February 2007, 05:36:00 UTC |
| 0136322 | Kyle McMartin | 27 February 2007, 03:21:22 UTC | [PARISC] clocksource: Move update_cr16_clocksource later in boot smp_cpus_done is too early for us... before we even do a device inventory! Move update_cr16_clocksource into the tail end of processor_probe() and stub it out on CONFIG_SMP=n builds. Verified that clocksource0 is properly updated to use jiffies on an SMP build. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> | 27 February 2007, 03:21:22 UTC |
| fb55a0d | Kyle McMartin | 27 February 2007, 02:29:26 UTC | [PARISC] parisc-agp: Fix thinko const-ifying Can't really blame davej for mucking this up... static-ify it while we're at it, which would have prevented this... Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> | 27 February 2007, 02:29:26 UTC |
| b2a8289 | Kyle McMartin | 27 February 2007, 02:24:56 UTC | [PARISC] time: clocksource lost update_callback So move the code to be called by smp_cpus_done, which is after we've figured out if there's more than one cpu actually present. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> | 27 February 2007, 02:24:56 UTC |
| 87c8174 | Kyle McMartin | 27 February 2007, 01:15:18 UTC | [PARISC] time: Convert clocksource is_continuous to flag Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> | 27 February 2007, 01:15:18 UTC |
| 00d1f3c | Kyle McMartin | 27 February 2007, 01:10:42 UTC | [PARISC] clocksource_cr16: Use clocksource_change_rating() Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> | 27 February 2007, 01:10:42 UTC |
| 0ff851e | Kyle McMartin | 27 February 2007, 01:08:46 UTC | [PARISC] Remove __read_mostly annotation from command_line Who cares if it's in the read mostly section when it's going to be discarded anyway? Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> | 27 February 2007, 01:08:46 UTC |
| c68644d | Ralf Baechle | 26 February 2007, 20:46:34 UTC | [MIPS] Make SMTC_IDLE_HOOK_DEBUG a proper option in Kconfig.debug. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 26 February 2007, 23:06:06 UTC |
| e016c38 | Ralf Baechle | 24 February 2007, 21:15:11 UTC | [MIPS] Fix foobar in wiring up compat_sys_epoll_pwait syscall. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 26 February 2007, 23:06:06 UTC |
| b772e6d | Ralf Baechle | 24 February 2007, 21:04:04 UTC | [MIPS] Always fixup unaligned accesses in kernel mode. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 26 February 2007, 23:06:06 UTC |
| 9b43fb6 | Thomas Bogendoerfer | 23 February 2007, 18:58:48 UTC | [MIPS] Fix dma_sync_*_for_device() functions Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 26 February 2007, 23:06:06 UTC |
| 40139bd | Robert P. J. Day | 24 February 2007, 11:17:09 UTC | [MIPS] Remove unreferenced _IOC_SLMASK macro in ioctl.h. Delete the definition of the apparently unreferenced macro _IOC_SLMASK. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 26 February 2007, 23:06:06 UTC |
| f13cc01 | Thomas Bogendoerfer | 23 February 2007, 20:39:38 UTC | [MIPS] SNI: MIPS_CPU_IRQ_BASE cleanup Use MIPS_CPU_IRQ_BASE instead of own define. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 26 February 2007, 23:06:06 UTC |
| 3dac256 | Ralf Baechle | 23 February 2007, 14:12:32 UTC | [MIPS] RTLX: Delete multiple definition of ret shaddowing each other. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 26 February 2007, 23:06:06 UTC |
| c4c4018 | Ralf Baechle | 23 February 2007, 13:40:45 UTC | [MIPS] RTLX, VPE: Make open actually atomic. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 26 February 2007, 23:06:06 UTC |
| cbc8413 | Thomas Koeller | 23 February 2007, 00:39:41 UTC | [MIPS] excite: Set serial driver iotype to UPIO_RM9000 Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 26 February 2007, 23:06:06 UTC |
| be91589 | Thomas Koeller | 23 February 2007, 00:40:34 UTC | [MIPS] excite: Rename CONFIG option This change is purely cosmetical. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 26 February 2007, 23:06:05 UTC |
| 4419708 | Atsushi Nemoto | 22 February 2007, 16:13:17 UTC | [MIPS] Mark pcibios_fixup_device_resources() as __devinit pcibios_fixup_device_resources() is called by pcibios_fixup_bus() which is marked as __devinit. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 26 February 2007, 23:06:05 UTC |
| d2af363 | Atsushi Nemoto | 22 February 2007, 15:39:48 UTC | [MIPS] Kill redundant EXTRA_AFLAGS Many Makefiles in arch/mips have EXTRA_AFLAGS := $(CFLAGS) line. This is redundant while AFLAGS contains $(cflags-y) and any options only listed in CFLAGS (not in cflags-y) should be unnecessary for asm sources. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 26 February 2007, 23:06:05 UTC |
| 67e2ccc | Ralf Baechle | 22 February 2007, 14:19:48 UTC | [MIPS] RTLX: Handle signals when sleeping. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 26 February 2007, 23:06:05 UTC |
| cc39cb1 | Yoichi Yuasa | 22 February 2007, 13:31:00 UTC | [MIPS] TB0287: Enable SM501 driver support in defconfig Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 26 February 2007, 23:06:04 UTC |
| 6f366c1 | Linus Torvalds | 26 February 2007, 22:58:03 UTC | Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (51 commits) [libata] bump versions [libata] Trim trailing whitespace. [libata] sata_mv: Fix 50xx irq mask [libata] sata_mv: don't touch reserved bits in EDMA config register libata: Use new id_to_dma_mode function to tidy reporting in more drivers (minimally tested) pata_pcmcia: Fix oops in 2.6.21-rc1 Add id_to_dma_mode function for printing DMA modes sata_promise: simplify port setup sata_promise: fix 20619 new EH merge error [libata] ACPI: remove needless ->qc_issue hook existence test sata_vsc: refactor vsc_sata_interrupt and hook up error handling sata_sil: ignore and clear spurious IRQs while executing commands by polling sata_mv: fix pci_enable_msi() error handling pata_amd: fix an obvious bug in cable detection [libata] ata_piix: remove duplicate PCI IDs sata_nv: complain on spurious completion notifiers libata: test major version in ata_id_is_sata() sata_nv: kill old private BMDMA helper functions libata: fix remaining ap->id ahci: consider SDB FIS containing spurious NCQ completions HSM violation (regenerated) ... | 26 February 2007, 22:58:03 UTC |
| 221dee2 | Linus Torvalds | 26 February 2007, 22:55:48 UTC | Revert "[CPUFREQ] constify cpufreq_driver where possible." This reverts commit aeeddc1435c37fa3fc844f31d39c185b08de4158, which was half-baked and broken. It just resulted in compile errors, since cpufreq_register_driver() still changes the 'driver_data' by setting bits in the flags field. So claiming it is 'const' _really_ doesn't work. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 26 February 2007, 22:55:48 UTC |
| 6f8c480 | Linus Torvalds | 26 February 2007, 22:17:50 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq * master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] constify some data tables. [CPUFREQ] constify cpufreq_driver where possible. {rd,wr}msr_on_cpu SMP=n optimization [CPUFREQ] cpufreq_ondemand.c: don't use _WORK_NAR rdmsr_on_cpu, wrmsr_on_cpu [CPUFREQ] Revert default on deprecated config X86_SPEEDSTEP_CENTRINO_ACPI | 26 February 2007, 22:17:50 UTC |
| 038c068 | Linus Torvalds | 26 February 2007, 21:19:17 UTC | Merge master.kernel.org:/home/rmk/linux-2.6-arm * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] CLPS7500 doesn't have IO ports [ARM] Fix more apm-emulation.h [ARM] 4234/1: Introduce get_irqnr_preamble and arch_ret_to_user for ns9xxx. [ARM] 4233/1: nand/s3c2410.c: warning fix [ARM] 4226/1: initial .data and .bss mappings of XIP kernel should be TEXT_OFFSET [ARM] 4224/2: allow XIP kernel to boot again [ARM] 4232/1: AT91: Generic GPIO bug [ARM] 4231/1: AT91: Merge and typo fixes. [ARM] 4229/1: S3C2410: Add MACH_QT2410 to s3c2410_defconfig [ARM] 4228/2: S3C24XX: update s3c2410_defconfig for 2.6.21-rc1 | 26 February 2007, 21:19:17 UTC |
| 5992fd1 | Linus Torvalds | 26 February 2007, 21:18:43 UTC | Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Correct debugging output when path record lookup fails RDMA/cxgb3: Stop the EP Timer on BAD CLOSE RDMA/cxgb3: cleanups RDMA/cma: Remove unused node_guid from cma_device structure IB/cm: Remove ca_guid from cm_device structure RDMA/cma: Request reversible paths only IB/core: Set hop limit in ib_init_ah_from_wc correctly IB/uverbs: Return correct error for invalid PD in register MR IPoIB: Remove unused local_rate tracking IPoIB/cm: Improve small message bandwidth IB/mthca: Make 2 functions static | 26 February 2007, 21:18:43 UTC |
| e416988 | Russell King | 26 February 2007, 21:07:30 UTC | [ARM] CLPS7500 doesn't have IO ports Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 26 February 2007, 21:07:30 UTC |
| 61fde51 | Russell King | 26 February 2007, 21:04:29 UTC | [ARM] Fix more apm-emulation.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 26 February 2007, 21:04:29 UTC |
| eafb4f1 | Alan | 21 February 2007, 16:41:23 UTC | [PATCH] Fix oops in pata_pcmcia The change to the devres layer re-orders the execution of cleanup functions and in turn causes the pcmcia layer to oops as it zaps a pointer now needed later on. We simply leave the pointer alone. Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 26 February 2007, 21:02:08 UTC |
| 8cd0ae0 | Rusty Russell | 23 February 2007, 03:12:02 UTC | [PATCH] Make hvc_console.c compile on non-powerpc: Remove NO_IRQ Paulus preferred this over #defining NO_IRQ in the file, since that's 0 for powerpc anyway. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 26 February 2007, 20:58:33 UTC |
| 843613b | Roland Dreier | 26 February 2007, 20:57:08 UTC | IPoIB: Correct debugging output when path record lookup fails If path_rec_completion() is passed a non-NULL path record pointer along with an unsuccessful status value, the tracing code incorrectly prints the (invalid) DLID from the path record rather than the more interesting status code. The actual logic of the function correctly uses the path record only if the status indicates a successful lookup. Signed-off-by: Roland Dreier <rolandd@cisco.com> | 26 February 2007, 20:57:08 UTC |
| 62fa4dc | Ondrej Zajicek | 22 February 2007, 16:00:41 UTC | [PATCH] Fix build-failure in drivers/video/s3fb.c Toralf Förster pointed out that drivers/video/s3fb.c would fail to compile: > ... > CC drivers/video/s3fb.o > drivers/video/s3fb.c: In function `s3_pci_remove': > drivers/video/s3fb.c:1003: warning: unused variable `par' > drivers/video/s3fb.c: In function `s3fb_setup': > drivers/video/s3fb.c:1141: error: `mtrr' undeclared (first use in this function) > drivers/video/s3fb.c:1141: error: (Each undeclared identifier is reported only once > drivers/video/s3fb.c:1141: error: for each function it appears in.) > make[2]: *** [drivers/video/s3fb.o] Error 1 > make[1]: *** [drivers/video] Error 2 > make: *** [drivers] Error 2 Here is fix, it also fixes broken boot options. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 26 February 2007, 20:56:46 UTC |
| 2516512 | Ingo Molnar | 22 February 2007, 08:38:22 UTC | [PATCH] x86: add -freg-struct-return to CFLAGS Jeremy Fitzhardinge suggested the use of -freg-struct-return, which does structure-returns (such as when using pte_t) in registers instead of on the stack. that is indeed so, and this option reduced the kernel size a bit: text data bss dec hex filename 4799506 543456 3760128 9103090 8ae6f2 vmlinux.before 4798117 543456 3760128 9101701 8ae185 vmlinux.after the resulting kernel booted fine on my testbox. Lets go for it. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 26 February 2007, 20:53:30 UTC |
| 38bed54 | Ingo Molnar | 22 February 2007, 08:09:34 UTC | [PATCH] add MAINTAINERS entry for high-res timers, clockevents, dynticks Thomas is the maintainer and primary author of the high-res timers, clockevents and dynticks code. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 26 February 2007, 20:53:30 UTC |
| b0138a6 | Linus Torvalds | 26 February 2007, 20:48:06 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (78 commits) [PARISC] Use symbolic last syscall in __NR_Linux_syscalls [PARISC] Add missing statfs64 and fstatfs64 syscalls Revert "[PARISC] Optimize TLB flush on SMP systems" [PARISC] Compat signal fixes for 64-bit parisc [PARISC] Reorder syscalls to match unistd.h Revert "[PATCH] make kernel/signal.c:kill_proc_info() static" [PARISC] fix sys_rt_sigqueueinfo [PARISC] fix section mismatch warnings in harmony sound driver [PARISC] do not export get_register/set_register [PARISC] add ENTRY()/ENDPROC() and simplify assembly of HP/UX emulation code [PARISC] convert to use CONFIG_64BIT instead of __LP64__ [PARISC] use CONFIG_64BIT instead of __LP64__ [PARISC] add ASM_EXCEPTIONTABLE_ENTRY() macro [PARISC] more ENTRY(), ENDPROC(), END() conversions [PARISC] fix ENTRY() and ENDPROC() for 64bit-parisc [PARISC] Fixes /proc/cpuinfo cache output on B160L [PARISC] implement standard ENTRY(), END() and ENDPROC() [PARISC] kill ENTRY_SYS_CPUS [PARISC] clean up debugging printks in smp.c [PARISC] factor syscall_restart code out of do_signal ... Fix conflict in include/linux/sched.h due to kill_proc_info() being made publicly available to PARISC again. | 26 February 2007, 20:48:06 UTC |
| 6572d6d | Mikael Pettersson | 25 February 2007, 11:49:01 UTC | [PATCH] CREDITS: update my email address Update my email address in CREDITS to one that works. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 26 February 2007, 20:36:41 UTC |
| f15e66b | Richard Knutsson | 24 February 2007, 10:46:06 UTC | [PATCH] drivers/mfd/sm501.c: Replace pci_module_init with pci_register_driver Replace pci_module_init with pci_register_driver Signed-off-by: Richard Knutson <ricknu-0@student.ltu.se> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 26 February 2007, 20:35:47 UTC |
| 5d5dde2 | Linus Torvalds | 26 February 2007, 20:23:08 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits) [XFRM]: Fix oops in xfrm4_dst_destroy() [XFRM_TUNNEL]: Reload header pointer after pskb_may_pull/pskb_expand_head [IPV4]: Use random32() in net/ipv4/multipath [BRIDGE]: eliminate workqueue for carrier check [BRIDGE]: get rid of miscdevice include [IPV6]: Fix __ipv6_addr_type() export in correct place. [IPV4] devinet: Register inetdev earlier. [IPV6] ADDRCONF: Register inet6_dev earlier. [IPV6] ADDRCONF: Manage prefix route corresponding to address manually added. [IPV6] IP6TUNNEL: Use update_pmtu() of dst on xmit. [IPV6] ADDRCONF: Statically link __ipv6_addr_type() for sunrpc subsystem. [IPV4]: Correct links in net/ipv4/Kconfig [SCTP]: Strike the transport before updating rto. [SCTP]: Fix connection hang/slowdown with PR-SCTP [TCP]: Fix MD5 signature pool locking. [TG3]: TSO workaround fixes. [AF_PACKET]: Remove unnecessary casts. [IPV6]: Adjust inet6_exit() cleanup sequence against inet6_init() [IPSEC]: More fix is needed for __xfrm6_bundle_create(). [IRDA] net/irda/: proper prototypes ... | 26 February 2007, 20:23:08 UTC |
| aef8811 | Bernhard Walle | 26 February 2007, 20:10:32 UTC | [XFRM]: Fix oops in xfrm4_dst_destroy() With 2.6.21-rc1, I get an oops when running 'ifdown eth0' and an IPsec connection is active. If I shut down the connection before running 'ifdown eth0', then there's no problem. The critical operation of this script is to kill dhcpd. The problem is probably caused by commit with git identifier 4337226228e1cfc1d70ee975789c6bd070fb597c (Linus tree) "[IPSEC]: IPv4 over IPv6 IPsec tunnel". This patch fixes that oops. I don't know the network code of the Linux kernel in deep, so if that fix is wrong, please change it. But please fix the oops. :) Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 February 2007, 20:10:32 UTC |
| dafdcfb | Linus Torvalds | 26 February 2007, 20:06:43 UTC | Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jmorris/selinux-2.6 * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jmorris/selinux-2.6: Always initialize scontext and scontext_len Reassign printk levels in selinux kernel code | 26 February 2007, 20:06:43 UTC |
| c90c69a | Linus Torvalds | 26 February 2007, 20:06:08 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC] uctrl: Check request_irq() return value. [SPARC64]: Update defconfig. [SPARC64] bbc_i2c: Fix kenvctrld eating %100 cpu. [SPARC64]: Fix arch_teardown_msi_irq(). [SPARC64]: virt_irq_free only needed when CONFIG_PCI_MSI [SPARC]: Remove the broken SUN_AURORA driver. | 26 February 2007, 20:06:08 UTC |
| 6842ac6 | Linus Torvalds | 26 February 2007, 19:45:50 UTC | Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds * 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Add support for Cobalt Server front LED leds: Add IPAQ h1940 LEDs support | 26 February 2007, 19:45:50 UTC |
