https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
52a93d3 Linux 6.5-rc5 06 August 2023, 22:07:51 UTC
0108963 Merge tag 'v6.5-rc5.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: - Fix a wrong check for O_TMPFILE during RESOLVE_CACHED lookup - Clean up directory iterators and clarify file_needs_f_pos_lock() * tag 'v6.5-rc5.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: rely on ->iterate_shared to determine f_pos locking vfs: get rid of old '->iterate' directory operation proc: fix missing conversion to 'iterate_shared' open: make RESOLVE_CACHED correctly test for O_TMPFILE 06 August 2023, 17:43:52 UTC
7d84d1b fs: rely on ->iterate_shared to determine f_pos locking Now that we removed ->iterate we don't need to check for either ->iterate or ->iterate_shared in file_needs_f_pos_lock(). Simply check for ->iterate_shared instead. This will tell us whether we need to unconditionally take the lock. Not just does it allow us to avoid checking f_inode's mode it also actually clearly shows that we're locking because of readdir. Signed-off-by: Christian Brauner <brauner@kernel.org> 06 August 2023, 13:08:36 UTC
3e32715 vfs: get rid of old '->iterate' directory operation All users now just use '->iterate_shared()', which only takes the directory inode lock for reading. Filesystems that never got convered to shared mode now instead use a wrapper that drops the lock, re-takes it in write mode, calls the old function, and then downgrades the lock back to read mode. This way the VFS layer and other callers no longer need to care about filesystems that never got converted to the modern era. The filesystems that use the new wrapper are ceph, coda, exfat, jfs, ntfs, ocfs2, overlayfs, and vboxsf. Honestly, several of them look like they really could just iterate their directories in shared mode and skip the wrapper entirely, but the point of this change is to not change semantics or fix filesystems that haven't been fixed in the last 7+ years, but to finally get rid of the dual iterators. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christian Brauner <brauner@kernel.org> 06 August 2023, 13:08:35 UTC
0a2c2ba proc: fix missing conversion to 'iterate_shared' I'm looking at the directory handling due to the discussion about f_pos locking (see commit 797964253d35: "file: reinstate f_pos locking optimization for regular files"), and wanting to clean that up. And one source of ugliness is how we were supposed to move filesystems over to the '->iterate_shared()' function that only takes the inode lock for reading many many years ago, but several filesystems still use the bad old '->iterate()' that takes the inode lock for exclusive access. See commit 6192269444eb ("introduce a parallel variant of ->iterate()") that also added some documentation stating Old method is only used if the new one is absent; eventually it will be removed. Switch while you still can; the old one won't stay. and that was back in April 2016. Here we are, many years later, and the old version is still clearly sadly alive and well. Now, some of those old style iterators are probably just because the filesystem may end up having per-inode mutable data that it uses for iterating a directory, but at least one case is just a mistake. Al switched over most filesystems to use '->iterate_shared()' back when it was introduced. In particular, the /proc filesystem was converted as one of the first ones in commit f50752eaa0b0 ("switch all procfs directories ->iterate_shared()"). But then later one new user of '->iterate()' was then re-introduced by commit 6d9c939dbe4d ("procfs: add smack subdir to attrs"). And that's clearly not what we wanted, since that new case just uses the same 'proc_pident_readdir()' and 'proc_pident_lookup()' helper functions that other /proc pident directories use, and they are most definitely safe to use with the inode lock held shared. So just fix it. This still leaves a fair number of oddball filesystems using the old-style directory iterator (ceph, coda, exfat, jfs, ntfs, ocfs2, overlayfs, and vboxsf), but at least we don't have any remaining in the core filesystems. I'm going to add a wrapper function that just drops the read-lock and takes it as a write lock, so that we can clean up the core vfs layer and make all the ugly 'this filesystem needs exclusive inode locking' be just filesystem-internal warts. I just didn't want to make that conversion when we still had a core user left. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christian Brauner <brauner@kernel.org> 06 August 2023, 13:08:35 UTC
a0fc452 open: make RESOLVE_CACHED correctly test for O_TMPFILE O_TMPFILE is actually __O_TMPFILE|O_DIRECTORY. This means that the old fast-path check for RESOLVE_CACHED would reject all users passing O_DIRECTORY with -EAGAIN, when in fact the intended test was to check for __O_TMPFILE. Cc: stable@vger.kernel.org # v5.12+ Fixes: 99668f618062 ("fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED") Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Message-Id: <20230806-resolve_cached-o_tmpfile-v1-1-7ba16308465e@cyphar.com> Signed-off-by: Christian Brauner <brauner@kernel.org> 06 August 2023, 13:08:35 UTC
f0ab9f3 Merge tag 'rust-fixes-6.5-rc5' of https://github.com/Rust-for-Linux/linux Pull rust fixes from Miguel Ojeda: - Allocator: prevent mis-aligned allocation - Types: delete 'ForeignOwnable::borrow_mut'. A sound replacement is planned for the merge window - Build: fix bindgen error with UBSAN_BOUNDS_STRICT * tag 'rust-fixes-6.5-rc5' of https://github.com/Rust-for-Linux/linux: rust: fix bindgen build error with UBSAN_BOUNDS_STRICT rust: delete `ForeignOwnable::borrow_mut` rust: allocator: Prevent mis-aligned allocation 06 August 2023, 02:28:02 UTC
fb0d919 Merge tag 'ata-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata fix from Damien Le Moal: - Prevent the scsi disk driver from issuing a START STOP UNIT command for ATA devices during system resume as this causes various issues reported by multiple users. * tag 'ata-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata,scsi: do not issue START STOP UNIT on resume 06 August 2023, 01:45:18 UTC
f6a6916 Merge tag '6.5-rc4-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6 Pull smb client fix from Steve French: - Fix DFS interlink problem (different namespace) * tag '6.5-rc4-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6: smb: client: fix dfs link mount against w2k8 05 August 2023, 20:44:06 UTC
251a94f Merge tag 'powerpc-6.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix vmemmap altmap boundary check which could cause memory hotunplug failure - Create a dummy stackframe to fix ftrace stack unwind - Fix secondary thread bringup for Book3E ELFv2 kernels - Use early_ioremap/unmap() in via_calibrate_decr() Thanks to Aneesh Kumar K.V, Benjamin Gray, Christophe Leroy, David Hildenbrand, and Naveen N Rao. * tag 'powerpc-6.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powermac: Use early_* IO variants in via_calibrate_decr() powerpc/64e: Fix secondary thread bringup for ELFv2 kernels powerpc/ftrace: Create a dummy stackframe to fix stack unwind powerpc/mm/altmap: Fix altmap boundary check 05 August 2023, 20:16:17 UTC
947c2a8 Merge tag 'parisc-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - early fixmap preallocation to fix boot failures on kernel >= 6.4 - remove DMA leftover code in parport_gsc - drop old comments and code style fixes * tag 'parisc-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: unaligned: Add required spaces after ',' parport: gsc: remove DMA leftover code parisc: pci-dma: remove unused and dead EISA code and comment parisc/mm: preallocate fixmap page tables at init 05 August 2023, 20:09:05 UTC
c9d26d8 Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A few clk driver fixes for some SoC clk drivers: - Change a usleep() to udelay() to avoid scheduling while atomic in the Amlogic PLL code - Revert a patch to the Mediatek MT8183 driver that caused an out-of-bounds write - Return the right error value when devm_of_iomap() fails in imx93_clocks_probe() - Constrain the Kconfig for the fixed mmio clk so that it depends on HAS_IOMEM and can't be compiled on architectures such as s390" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: fixed-mmio: make COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM clk: imx93: Propagate correct error in imx93_clocks_probe() clk: mediatek: mt8183: Add back SSPM related clocks clk: meson: change usleep_range() to udelay() for atomic context 05 August 2023, 02:35:09 UTC
024ff30 Merge tag 'hyperv-fixes-signed-20230804' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Fix a bug in a python script for Hyper-V (Ani Sinha) - Workaround a bug in Hyper-V when IBT is enabled (Michael Kelley) - Fix an issue parsing MP table when Linux runs in VTL2 (Saurabh Sengar) - Several cleanup patches (Nischala Yelchuri, Kameron Carr, YueHaibing, ZhiHu) * tag 'hyperv-fixes-signed-20230804' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Remove unused extern declaration vmbus_ontimer() x86/hyperv: add noop functions to x86_init mpparse functions vmbus_testing: fix wrong python syntax for integer value comparison x86/hyperv: fix a warning in mshyperv.h x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction x86/hyperv: Improve code for referencing hyperv_pcpu_input_arg Drivers: hv: Change hv_free_hyperv_page() to take void * argument 05 August 2023, 00:16:14 UTC
e661f98 Merge tag 'riscv-for-linus-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A pair of fixes for build-related failures in the selftests - A fix for a sparse warning in acpi_os_ioremap() - A fix to restore the kernel PA offset in vmcoreinfo, to fix crash handling * tag 'riscv-for-linus-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: Documentation: kdump: Add va_kernel_pa_offset for RISCV64 riscv: Export va_kernel_pa_offset in vmcoreinfo RISC-V: ACPI: Fix acpi_os_ioremap to return iomem address selftests: riscv: Fix compilation error with vstate_exec_nolibc.c selftests/riscv: fix potential build failure during the "emit_tests" step 04 August 2023, 23:04:37 UTC
ea4f142 Merge tag 'pm-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a sparse warning triggered by the TPMI interface recently added to the Intel RAPL power capping driver (Zhang Rui)" * tag 'pm-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap: intel_rapl: Fix a sparse warning in TPMI interface 04 August 2023, 22:54:03 UTC
e6fda52 Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "More SVE/SME fixes for ptrace() and for the (potentially future) case where SME is implemented in hardware without SVE support" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/fpsimd: Sync and zero pad FPSIMD state for streaming SVE arm64/fpsimd: Sync FPSIMD state with SVE for SME only systems arm64/ptrace: Don't enable SVE when setting streaming SVE arm64/ptrace: Flush FP state when setting ZT0 arm64/fpsimd: Clear SME state in the target task when setting the VL 04 August 2023, 19:11:40 UTC
c8273a2 Merge tag 'mtd/fixes-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fixes from Miquel Raynal: "Raw NAND fixes: - fsl_upm: Fix an off-by one test in fun_exec_op() - Rockchip: - Align hwecc vs. raw page helper layouts - Fix oobfree offset and description - Meson: Fix OOB available bytes for ECC - Omap ELM: Fix incorrect type in assignment SPI-NOR fix: - Avoid holes in struct spi_mem_op Hyperbus fix: - Add Tudor as reviewer in MAINTAINERS SPI-NAND fixes: - Winbond and Toshiba: Fix ecc_get_status" * tag 'mtd/fixes-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: fsl_upm: Fix an off-by one test in fun_exec_op() mtd: spi-nor: avoid holes in struct spi_mem_op MAINTAINERS: Add myself as reviewer for HYPERBUS mtd: rawnand: rockchip: Align hwecc vs. raw page helper layouts mtd: rawnand: rockchip: fix oobfree offset and description mtd: rawnand: meson: fix OOB available bytes for ECC mtd: rawnand: omap_elm: Fix incorrect type in assignment mtd: spinand: winbond: Fix ecc_get_status mtd: spinand: toshiba: Fix ecc_get_status 04 August 2023, 19:01:26 UTC
4142fc6 Merge tag 'drm-fixes-2023-08-04' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Small set of fixes this week, i915 and a few misc ones. I didn't see an amd pull so maybe next week it'll have a few more on that driver. ttm: - NULL ptr deref fix panel: - add missing MODULE_DEVICE_TABLE imx/ipuv3: - timing fix i915: - Fix bug in getting msg length in AUX CH registers handler - Gen12 AUX invalidation fixes - Fix premature release of request's reusable memory" * tag 'drm-fixes-2023-08-04' of git://anongit.freedesktop.org/drm/drm: drm/panel: samsung-s6d7aa0: Add MODULE_DEVICE_TABLE drm/i915: Fix premature release of request's reusable memory drm/i915/gt: Support aux invalidation on all engines drm/i915/gt: Poll aux invalidation register bit on invalidation drm/i915/gt: Enable the CCS_FLUSH bit in the pipe control and in the CS drm/i915/gt: Rename flags with bit_group_X according to the datasheet drm/i915/gt: Ensure memory quiesced before invalidation drm/i915: Add the gen12_needs_ccs_aux_inv helper drm/i915/gt: Cleanup aux invalidation registers drm/i915/gvt: Fix bug in getting msg length in AUX CH registers handler drm/imx/ipuv3: Fix front porch adjustment upon hactive aligning drm/ttm: check null pointer before accessing when swapping 04 August 2023, 18:50:22 UTC
4593f3c Merge tag 'ceph-for-6.5-rc5' of https://github.com/ceph/ceph-client Pull ceph fixes from Ilya Dryomov: "Two patches to improve RBD exclusive lock interaction with osd_request_timeout option and another fix to reduce the potential for erroneous blocklisting -- this time in CephFS. All going to stable" * tag 'ceph-for-6.5-rc5' of https://github.com/ceph/ceph-client: libceph: fix potential hang in ceph_osdc_notify() rbd: prevent busy loop when requesting exclusive lock ceph: defer stopping mdsc delayed_work 04 August 2023, 18:29:38 UTC
7979642 file: reinstate f_pos locking optimization for regular files In commit 20ea1e7d13c1 ("file: always lock position for FMODE_ATOMIC_POS") we ended up always taking the file pos lock, because pidfd_getfd() could get a reference to the file even when it didn't have an elevated file count due to threading of other sharing cases. But Mateusz Guzik reports that the extra locking is actually measurable, so let's re-introduce the optimization, and only force the locking for directory traversal. Directories need the lock for correctness reasons, while regular files only need it for "POSIX semantics". Since pidfd_getfd() is about debuggers etc special things that are _way_ outside of POSIX, we can relax the rules for that case. Reported-by: Mateusz Guzik <mjguzik@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/linux-fsdevel/20230803095311.ijpvhx3fyrbkasul@f/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 August 2023, 18:22:14 UTC
69af56a arm64/fpsimd: Sync and zero pad FPSIMD state for streaming SVE We have a function sve_sync_from_fpsimd_zeropad() which is used by the ptrace code to update the SVE state when the user writes to the the FPSIMD register set. Currently this checks that the task has SVE enabled but this will miss updates for tasks which have streaming SVE enabled if SVE has not been enabled for the thread, also do the conversion if the task has streaming SVE enabled. Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-3-49df214bfb3e@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 04 August 2023, 15:18:32 UTC
507ea5d arm64/fpsimd: Sync FPSIMD state with SVE for SME only systems Currently we guard FPSIMD/SVE state conversions with a check for the system supporting SVE but SME only systems may need to sync streaming mode SVE state so add a check for SME support too. These functions are only used by the ptrace code. Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-2-49df214bfb3e@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 04 August 2023, 15:18:31 UTC
045aecd arm64/ptrace: Don't enable SVE when setting streaming SVE Systems which implement SME without also implementing SVE are architecturally valid but were not initially supported by the kernel, unfortunately we missed one issue in the ptrace code. The SVE register setting code is shared between SVE and streaming mode SVE. When we set full SVE register state we currently enable TIF_SVE unconditionally, in the case where streaming SVE is being configured on a system that supports vanilla SVE this is not an issue since we always initialise enough state for both vector lengths but on a system which only support SME it will result in us attempting to restore the SVE vector length after having set streaming SVE registers. Fix this by making the enabling of SVE conditional on setting SVE vector state. If we set streaming SVE state and SVE was not already enabled this will result in a SVE access trap on next use of normal SVE, this will cause us to flush our register state but this is fine since the only way to trigger a SVE access trap would be to exit streaming mode which will cause the in register state to be flushed anyway. Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-1-49df214bfb3e@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 04 August 2023, 15:18:31 UTC
b055448 rust: fix bindgen build error with UBSAN_BOUNDS_STRICT With commit 2d47c6956ab3 ("ubsan: Tighten UBSAN_BOUNDS on GCC") if CONFIG_UBSAN is enabled and gcc supports -fsanitize=bounds-strict, we can trigger the following build error due to bindgen lacking support for this additional build option: BINDGEN rust/bindings/bindings_generated.rs error: unsupported argument 'bounds-strict' to option '-fsanitize=' Fix by adding -fsanitize=bounds-strict to the list of skipped gcc flags for bindgen. Fixes: 2d47c6956ab3 ("ubsan: Tighten UBSAN_BOUNDS on GCC") Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Link: https://lore.kernel.org/r/20230711071914.133946-1-andrea.righi@canonical.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> 04 August 2023, 15:10:50 UTC
1d24eb2 rust: delete `ForeignOwnable::borrow_mut` We discovered that the current design of `borrow_mut` is problematic. This patch removes it until a better solution can be found. Specifically, the current design gives you access to a `&mut T`, which lets you change where the `ForeignOwnable` points (e.g., with `core::mem::swap`). No upcoming user of this API intended to make that possible, making all of them unsound. Signed-off-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Gary Guo <gary@garyguo.net> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Fixes: 0fc4424d24a2 ("rust: types: introduce `ForeignOwnable`") Link: https://lore.kernel.org/r/20230706094615.3080784-1-aliceryhl@google.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> 04 August 2023, 15:10:50 UTC
b3d8aa8 rust: allocator: Prevent mis-aligned allocation Currently the rust allocator simply passes the size of the type Layout to krealloc(), and in theory the alignment requirement from the type Layout may be larger than the guarantee provided by SLAB, which means the allocated object is mis-aligned. Fix this by adjusting the allocation size to the nearest power of two, which SLAB always guarantees a size-aligned allocation. And because Rust guarantees that the original size must be a multiple of alignment and the alignment must be a power of two, then the alignment requirement is satisfied. Suggested-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: "Andreas Hindborg (Samsung)" <nmi@metaspace.dk> Signed-off-by: "Andreas Hindborg (Samsung)" <nmi@metaspace.dk> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Cc: stable@vger.kernel.org # v6.1+ Acked-by: Vlastimil Babka <vbabka@suse.cz> Fixes: 247b365dc8dc ("rust: add `kernel` crate") Link: https://github.com/Rust-for-Linux/linux/issues/974 Link: https://lore.kernel.org/r/20230730012905.643822-2-boqun.feng@gmail.com [ Applied rewording of comment as discussed in the mailing list. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> 04 August 2023, 15:10:31 UTC
1958b0f Merge tag 'drm-intel-fixes-2023-08-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix bug in getting msg length in AUX CH registers handler [gvt] (Yan Zhao) - Gen12 AUX invalidation fixes [gt] (Andi Shyti, Jonathan Cavitt) - Fix premature release of request's reusable memory (Janusz Krzysztofik) - Merge tag 'gvt-fixes-2023-08-02' of https://github.com/intel/gvt-linux into drm-intel-fixes (Tvrtko Ursulin) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZMtkxWGuUKpaRMmo@tursulin-desk 03 August 2023, 23:38:38 UTC
062ff85 Merge tag 'drm-misc-fixes-2023-08-03' of ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes A NULL pointer dereference fix for TTM, a timings fix for imx/ipuv3 and the addition of a MODULE_DEVICE_TABLE for the samsung-s6d7aa0 panel. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/ztfogof2dhtlvjwe73mvd2jp5kbldhkkav7k5culuseqblwpti@qfobohwx3c3j 03 August 2023, 23:27:04 UTC
c1a515d Merge tag 'perf-tools-fixes-for-v6.5-2-2023-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix segfault in the powerpc specific arch_skip_callchain_idx function. The patch doing the reference count init/exit that went into 6.5 missed this function. - Fix regression reading the arm64 PMU cpu slots in sysfs, a patch removing some code duplication ended up duplicating the /sysfs prefix for these files. - Fix grouping of events related to topdown, addressing a regression on the CSV output produced by 'perf stat' noticed on the downstream tool toplev. - Fix the uprobe_from_different_cu 'perf test' entry, it is failing when gcc isn't available, so we need to check that and skip the test if it is not installed. * tag 'perf-tools-fixes-for-v6.5-2-2023-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf test parse-events: Test complex name has required event format perf pmus: Create placholder regardless of scanning core_only perf test uprobe_from_different_cu: Skip if there is no gcc perf parse-events: Only move force grouped evsels when sorting perf parse-events: When fixing group leaders always set the leader perf parse-events: Extra care around force grouped events perf callchain powerpc: Fix addr location init during arch_skip_callchain_idx function perf pmu arm64: Fix reading the PMU cpu slots in sysfs 03 August 2023, 22:47:39 UTC
638c191 Merge tag 'cxl-fixes-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull cxl fixes from Vishal Verma: - Fixup the Sanitixe device ABI that was merged for v6.5 to hide some sysfs files when the necessary support is missing. Update the ABI documentation around this as well. * tag 'cxl-fixes-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/memdev: Only show sanitize sysfs files when supported cxl/memdev: Document security state in kern-doc cxl/memdev: Improve sanitize ABI descriptions 03 August 2023, 22:41:48 UTC
999f663 Merge tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and wireless. Nothing scary here. Feels like the first wave of regressions from v6.5 is addressed - one outstanding fix still to come in TLS for the sendpage rework. Current release - regressions: - udp: fix __ip_append_data()'s handling of MSG_SPLICE_PAGES - dsa: fix older DSA drivers using phylink Previous releases - regressions: - gro: fix misuse of CB in udp socket lookup - mlx5: unregister devlink params in case interface is down - Revert "wifi: ath11k: Enable threaded NAPI" Previous releases - always broken: - sched: cls_u32: fix match key mis-addressing - sched: bind logic fixes for cls_fw, cls_u32 and cls_route - add bound checks to a number of places which hand-parse netlink - bpf: disable preemption in perf_event_output helpers code - qed: fix scheduling in a tasklet while getting stats - avoid using APIs which are not hardirq-safe in couple of drivers, when we may be in a hard IRQ (netconsole) - wifi: cfg80211: fix return value in scan logic, avoid page allocator warning - wifi: mt76: mt7615: do not advertise 5 GHz on first PHY of MT7615D (DBDC) Misc: - drop handful of inactive maintainers, put some new in place" * tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (98 commits) MAINTAINERS: update TUN/TAP maintainers test/vsock: remove vsock_perf executable on `make clean` tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen tcp_metrics: annotate data-races around tm->tcpm_net tcp_metrics: annotate data-races around tm->tcpm_vals[] tcp_metrics: annotate data-races around tm->tcpm_lock tcp_metrics: annotate data-races around tm->tcpm_stamp tcp_metrics: fix addr_same() helper prestera: fix fallback to previous version on same major version udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES net/mlx5e: Set proper IPsec source port in L4 selector net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio net/mlx5: fs_core: Make find_closest_ft more generic wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1() vxlan: Fix nexthop hash size ip6mr: Fix skb_under_panic in ip6mr_cache_report() s390/qeth: Don't call dev_close/dev_open (DOWN/UP) net: tap_open(): set sk_uid from current_fsuid() net: tun_chr_open(): set sk_uid from current_fsuid() net: dcb: choose correct policy to parse DCB_ATTR_BCN ... 03 August 2023, 21:00:02 UTC
0765c5f MAINTAINERS: update TUN/TAP maintainers Willem and Jason have agreed to take over the maintainer duties for TUN/TAP, thank you! There's an existing entry for TUN/TAP which only covers the user mode Linux implementation. Since we haven't heard from Maxim on the list for almost a decade, extend that entry and take it over, rather than adding a new one. Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20230802182843.4193099-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 03 August 2023, 18:57:38 UTC
3932f22 Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Martin KaFai Lau says: ==================== pull-request: bpf 2023-08-03 We've added 5 non-merge commits during the last 7 day(s) which contain a total of 3 files changed, 37 insertions(+), 20 deletions(-). The main changes are: 1) Disable preemption in perf_event_output helpers code, from Jiri Olsa 2) Add length check for SK_DIAG_BPF_STORAGE_REQ_MAP_FD parsing, from Lin Ma 3) Multiple warning splat fixes in cpumap from Hou Tao * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, cpumap: Handle skb as well when clean up ptr_ring bpf, cpumap: Make sure kthread is running before map update returns bpf: Add length check for SK_DIAG_BPF_STORAGE_REQ_MAP_FD parsing bpf: Disable preemption in bpf_event_output bpf: Disable preemption in bpf_perf_event_output ==================== Link: https://lore.kernel.org/r/20230803181429.994607-1-martin.lau@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> 03 August 2023, 18:22:53 UTC
0d48a84 Merge tag 'wireless-2023-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.5 We did some house cleaning in MAINTAINERS file so several patches about that. Few regressions fixed and also fix some recently enabled memcpy() warnings. Only small commits and nothing special standing out. * tag 'wireless-2023-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1() wifi: ray_cs: Replace 1-element array with flexible array MAINTAINERS: add Jeff as ath10k, ath11k and ath12k maintainer MAINTAINERS: wifi: mark mlw8k as orphan MAINTAINERS: wifi: mark b43 as orphan MAINTAINERS: wifi: mark zd1211rw as orphan MAINTAINERS: wifi: mark wl3501 as orphan MAINTAINERS: wifi: mark rndis_wlan as orphan MAINTAINERS: wifi: mark ar5523 as orphan MAINTAINERS: wifi: mark cw1200 as orphan MAINTAINERS: wifi: atmel: mark as orphan MAINTAINERS: wifi: rtw88: change Ping as the maintainer Revert "wifi: ath6k: silence false positive -Wno-dangling-pointer warning on GCC 12" wifi: cfg80211: Fix return value in scan logic Revert "wifi: ath11k: Enable threaded NAPI" MAINTAINERS: Update mwifiex maintainer list wifi: mt76: mt7615: do not advertise 5 GHz on first phy of MT7615D (DBDC) ==================== Link: https://lore.kernel.org/r/20230803140058.57476C433C9@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 03 August 2023, 18:05:46 UTC
3c50c8b test/vsock: remove vsock_perf executable on `make clean` We forgot to add vsock_perf to the rm command in the `clean` target, so now we have a left over after `make clean` in tools/testing/vsock. Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility") Cc: AVKrasnov@sberdevices.ru Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Link: https://lore.kernel.org/r/20230803085454.30897-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 03 August 2023, 18:04:42 UTC
374297e Merge branch 'tcp_metrics-series-of-fixes' Eric Dumazet says: ==================== tcp_metrics: series of fixes This series contains a fix for addr_same() and various data-race annotations. We still have to address races over tm->tcpm_saddr and tm->tcpm_daddr later. ==================== Link: https://lore.kernel.org/r/20230802131500.1478140-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 03 August 2023, 17:58:27 UTC
ddf251f tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen Whenever tcpm_new() reclaims an old entry, tcpm_suck_dst() would overwrite data that could be read from tcp_fastopen_cache_get() or tcp_metrics_fill_info(). We need to acquire fastopen_seqlock to maintain consistency. For newly allocated objects, tcpm_new() can switch to kzalloc() to avoid an extra fastopen_seqlock acquisition. Fixes: 1fe4c481ba63 ("net-tcp: Fast Open client - cookie cache") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230802131500.1478140-7-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 03 August 2023, 17:58:24 UTC
d5d986c tcp_metrics: annotate data-races around tm->tcpm_net tm->tcpm_net can be read or written locklessly. Instead of changing write_pnet() and read_pnet() and potentially hurt performance, add the needed READ_ONCE()/WRITE_ONCE() in tm_net() and tcpm_new(). Fixes: 849e8a0ca8d5 ("tcp_metrics: Add a field tcpm_net and verify it matches on lookup") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230802131500.1478140-6-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 03 August 2023, 17:58:24 UTC
8c4d04f tcp_metrics: annotate data-races around tm->tcpm_vals[] tm->tcpm_vals[] values can be read or written locklessly. Add needed READ_ONCE()/WRITE_ONCE() to document this, and force use of tcp_metric_get() and tcp_metric_set() Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 03 August 2023, 17:58:24 UTC
285ce11 tcp_metrics: annotate data-races around tm->tcpm_lock tm->tcpm_lock can be read or written locklessly. Add needed READ_ONCE()/WRITE_ONCE() to document this. Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230802131500.1478140-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 03 August 2023, 17:58:24 UTC
949ad62 tcp_metrics: annotate data-races around tm->tcpm_stamp tm->tcpm_stamp can be read or written locklessly. Add needed READ_ONCE()/WRITE_ONCE() to document this. Also constify tcpm_check_stamp() dst argument. Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230802131500.1478140-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 03 August 2023, 17:58:24 UTC
e663809 tcp_metrics: fix addr_same() helper Because v4 and v6 families use separate inetpeer trees (respectively net->ipv4.peers and net->ipv6.peers), inetpeer_addr_cmp(a, b) assumes a & b share the same family. tcp_metrics use a common hash table, where entries can have different families. We must therefore make sure to not call inetpeer_addr_cmp() if the families do not match. Fixes: d39d14ffa24c ("net: Add helper function to compare inetpeer addresses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230802131500.1478140-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 03 August 2023, 17:58:24 UTC
b755c25 prestera: fix fallback to previous version on same major version When both supported and previous version have the same major version, and the firmwares are missing, the driver ends in a loop requesting the same (previous) version over and over again: [ 76.327413] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.1.img firmware, fall-back to previous 4.0 version [ 76.339802] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version [ 76.352162] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version [ 76.364502] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version [ 76.376848] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version [ 76.389183] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version [ 76.401522] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version [ 76.413860] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version [ 76.426199] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version ... Fix this by inverting the check to that we aren't yet at the previous version, and also check the minor version. This also catches the case where both versions are the same, as it was after commit bb5dbf2cc64d ("net: marvell: prestera: add firmware v4.0 support"). With this fix applied: [ 88.499622] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.1.img firmware, fall-back to previous 4.0 version [ 88.511995] Prestera DX 0000:01:00.0: failed to request previous firmware: mrvl/prestera/mvsw_prestera_fw-v4.0.img [ 88.522403] Prestera DX: probe of 0000:01:00.0 failed with error -2 Fixes: 47f26018a414 ("net: marvell: prestera: try to load previous fw version") Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de> Acked-by: Elad Nachman <enachman@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Taras Chornyi <taras.chornyi@plvision.eu> Link: https://lore.kernel.org/r/20230802092357.163944-1-jonas.gorski@bisdn.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> 03 August 2023, 17:56:49 UTC
7bafbd4 Merge tag 'nfsd-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: - Fix tmpfs splice read support * tag 'nfsd-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: Fix reading via splice 03 August 2023, 16:26:34 UTC
556c942 Merge tag 'erofs-for-6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fixes from Gao Xiang: - Fix data corruption caused by insufficient decompression on deduplicated compressed extents - Drop a useless s_magic checking in erofs_kill_sb() * tag 'erofs-for-6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: drop unnecessary WARN_ON() in erofs_kill_sb() erofs: fix wrong primary bvec selection on deduplicated extents 03 August 2023, 16:20:50 UTC
5e0ba14 Merge tag 's390-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Split kernel large page mappings into 4k mappings in case debug pagealloc is enabled again. This got accidentally removed by commit bb1520d581a3 ("s390/mm: start kernel with DAT enabled") - Fix error handling in KVM's sthyi handling - Add missing include to s390's uapi ptrace.h - Update defconfigs * tag 's390-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ptrace: add missing linux/const.h include KVM: s390: fix sthyi error handling s390: update defconfigs s390/vmem: split pages when debug pagealloc is enabled 03 August 2023, 16:06:38 UTC
89a65c3 arm64/ptrace: Flush FP state when setting ZT0 When setting ZT0 via ptrace we do not currently force a reload of the floating point register state from memory, do that to ensure that the newly set value gets loaded into the registers on next task execution. The function was templated off the function for FPSIMD which due to our providing the option of embedding a FPSIMD regset within the SVE regset does not directly include the flush. Fixes: f90b529bcbe5 ("arm64/sme: Implement ZT0 ptrace support") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-zt0-flush-v1-1-72e854eaf96e@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 03 August 2023, 14:42:14 UTC
c9bb40b arm64/fpsimd: Clear SME state in the target task when setting the VL When setting SME vector lengths we clear TIF_SME to reenable SME traps, doing a reallocation of the backing storage on next use. We do this using clear_thread_flag() which operates on the current thread, meaning that when setting the vector length via ptrace we may both not force traps for the target task and force a spurious flush of any SME state that the tracing task may have. Clear the flag in the target task. Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers") Reported-by: David Spickett <David.Spickett@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-tif-sme-v1-1-88312fd6fbfd@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 03 August 2023, 14:41:03 UTC
99b2f15 parisc: unaligned: Add required spaces after ',' Fix checkpatch warnings: unaligned.c:475: ERROR: space required after that ',' Signed-off-by: Yu Han <hanyu001@208suo.com> Signed-off-by: Helge Deller <deller@gmx.de> 03 August 2023, 12:40:37 UTC
2e1b1d7 parport: gsc: remove DMA leftover code This driver does not actually work with DMA mode, but still tries to call ISA DMA interface functions that are stubbed out on parisc, resulting in a W=1 build warning: drivers/parport/parport_gsc.c: In function 'parport_remove_chip': drivers/parport/parport_gsc.c:389:20: warning: suggest braces around empty body in an 'if' statement [-Wempty-body] 389 | free_dma(p->dma); Remove the corresponding code as a prerequisite for turning on -Wempty-body by default in all kernels. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Helge Deller <deller@gmx.de> 03 August 2023, 12:40:37 UTC
ce9ff57 parisc: pci-dma: remove unused and dead EISA code and comment Clearly, this code isn't needed, but it gives a false positive when grepping the complete source tree for coherent_dma_mask. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Signed-off-by: Helge Deller <deller@gmx.de> 03 August 2023, 12:40:37 UTC
c2ff2b7 parisc/mm: preallocate fixmap page tables at init Christoph Biedl reported early OOM on recent kernels: swapper: page allocation failure: order:0, mode:0x100(__GFP_ZERO), nodemask=(null) CPU: 0 PID: 0 Comm: swapper Not tainted 6.3.0-rc4+ #16 Hardware name: 9000/785/C3600 Backtrace: [<10408594>] show_stack+0x48/0x5c [<10e152d8>] dump_stack_lvl+0x48/0x64 [<10e15318>] dump_stack+0x24/0x34 [<105cf7f8>] warn_alloc+0x10c/0x1c8 [<105d068c>] __alloc_pages+0xbbc/0xcf8 [<105d0e4c>] __get_free_pages+0x28/0x78 [<105ad10c>] __pte_alloc_kernel+0x30/0x98 [<10406934>] set_fixmap+0xec/0xf4 [<10411ad4>] patch_map.constprop.0+0xa8/0xdc [<10411bb0>] __patch_text_multiple+0xa8/0x208 [<10411d78>] patch_text+0x30/0x48 [<1041246c>] arch_jump_label_transform+0x90/0xcc [<1056f734>] jump_label_update+0xd4/0x184 [<1056fc9c>] static_key_enable_cpuslocked+0xc0/0x110 [<1056fd08>] static_key_enable+0x1c/0x2c [<1011362c>] init_mem_debugging_and_hardening+0xdc/0xf8 [<1010141c>] start_kernel+0x5f0/0xa98 [<10105da8>] start_parisc+0xb8/0xe4 Mem-Info: active_anon:0 inactive_anon:0 isolated_anon:0 active_file:0 inactive_file:0 isolated_file:0 unevictable:0 dirty:0 writeback:0 slab_reclaimable:0 slab_unreclaimable:0 mapped:0 shmem:0 pagetables:0 sec_pagetables:0 bounce:0 kernel_misc_reclaimable:0 free:0 free_pcp:0 free_cma:0 Node 0 active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:0kB dirty:0kB writeback:0kB shmem:0kB +writeback_tmp:0kB kernel_stack:0kB pagetables:0kB sec_pagetables:0kB all_unreclaimable? no Normal free:0kB boost:0kB min:0kB low:0kB high:0kB reserved_highatomic:0KB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB +present:1048576kB managed:1039360kB mlocked:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 0 Normal: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB 0 total pagecache pages 0 pages in swap cache Free swap = 0kB Total swap = 0kB 262144 pages RAM 0 pages HighMem/MovableOnly 2304 pages reserved Backtrace: [<10411d78>] patch_text+0x30/0x48 [<1041246c>] arch_jump_label_transform+0x90/0xcc [<1056f734>] jump_label_update+0xd4/0x184 [<1056fc9c>] static_key_enable_cpuslocked+0xc0/0x110 [<1056fd08>] static_key_enable+0x1c/0x2c [<1011362c>] init_mem_debugging_and_hardening+0xdc/0xf8 [<1010141c>] start_kernel+0x5f0/0xa98 [<10105da8>] start_parisc+0xb8/0xe4 Kernel Fault: Code=15 (Data TLB miss fault) at addr 0f7fe3c0 CPU: 0 PID: 0 Comm: swapper Not tainted 6.3.0-rc4+ #16 Hardware name: 9000/785/C3600 This happens because patching static key code temporarily maps it via fixmap and if it happens before page allocator is initialized set_fixmap() cannot allocate memory using pte_alloc_kernel(). Make sure that fixmap page tables are preallocated early so that pte_offset_kernel() in set_fixmap() never resorts to pte allocation. Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Helge Deller <deller@gmx.de> Tested-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Tested-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> # v6.4+ 03 August 2023, 12:40:37 UTC
0f71c9c udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES __ip_append_data() can get into an infinite loop when asked to splice into a partially-built UDP message that has more than the frag-limit data and up to the MTU limit. Something like: pipe(pfd); sfd = socket(AF_INET, SOCK_DGRAM, 0); connect(sfd, ...); send(sfd, buffer, 8161, MSG_CONFIRM|MSG_MORE); write(pfd[1], buffer, 8); splice(pfd[0], 0, sfd, 0, 0x4ffe0ul, 0); where the amount of data given to send() is dependent on the MTU size (in this instance an interface with an MTU of 8192). The problem is that the calculation of the amount to copy in __ip_append_data() goes negative in two places, and, in the second place, this gets subtracted from the length remaining, thereby increasing it. This happens when pagedlen > 0 (which happens for MSG_ZEROCOPY and MSG_SPLICE_PAGES), because the terms in: copy = datalen - transhdrlen - fraggap - pagedlen; then mostly cancel when pagedlen is substituted for, leaving just -fraggap. This causes: length -= copy + transhdrlen; to increase the length to more than the amount of data in msg->msg_iter, which causes skb_splice_from_iter() to be unable to fill the request and it returns less than 'copied' - which means that length never gets to 0 and we never exit the loop. Fix this by: (1) Insert a note about the dodgy calculation of 'copy'. (2) If MSG_SPLICE_PAGES, clear copy if it is negative from the above equation, so that 'offset' isn't regressed and 'length' isn't increased, which will mean that length and thus copy should match the amount left in the iterator. (3) When handling MSG_SPLICE_PAGES, give a warning and return -EIO if we're asked to splice more than is in the iterator. It might be better to not give the warning or even just give a 'short' write. [!] Note that this ought to also affect MSG_ZEROCOPY, but MSG_ZEROCOPY avoids the problem by simply assuming that everything asked for got copied, not just the amount that was in the iterator. This is a potential bug for the future. Fixes: 7ac7c987850c ("udp: Convert udp_sendpage() to use MSG_SPLICE_PAGES") Reported-by: syzbot+f527b971b4bdc8e79f9e@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/000000000000881d0606004541d1@google.com/ Signed-off-by: David Howells <dhowells@redhat.com> cc: David Ahern <dsahern@kernel.org> cc: Jens Axboe <axboe@kernel.dk> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/1420063.1690904933@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> 03 August 2023, 02:19:32 UTC
a2d9831 Merge branch 'mlx5-ipsec-fixes' Leon Romanovsky says: ==================== mlx5 IPsec fixes The following patches are combination of Jianbo's work on IPsec eswitch mode together with our internal review toward addition of TCP protocol selectors support to IPSec packet offload. Despite not-being fix, the first patch helps us to make second one more clear, so I'm asking to apply it anyway as part of this series. ==================== Link: https://lore.kernel.org/r/cover.1690803944.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 03 August 2023, 01:38:45 UTC
62da083 net/mlx5e: Set proper IPsec source port in L4 selector Fix typo in setup_fte_upper_proto_match() where destination UDP port was used instead of source port. Fixes: a7385187a386 ("net/mlx5e: IPsec, support upper protocol selector field offload") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/ffc024a4d192113103f392b0502688366ca88c1f.1690803944.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 03 August 2023, 01:38:42 UTC
c635ca4 net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio In the cited commit, new type of FS_TYPE_PRIO_CHAINS fs_prio was added to support multiple parallel namespaces for multi-chains. And we skip all the flow tables under the fs_node of this type unconditionally, when searching for the next or previous flow table to connect for a new table. As this search function is also used for find new root table when the old one is being deleted, it will skip the entire FS_TYPE_PRIO_CHAINS fs_node next to the old root. However, new root table should be chosen from it if there is any table in it. Fix it by skipping only the flow tables in the same FS_TYPE_PRIO_CHAINS fs_node when finding the closest FT for a fs_node. Besides, complete the connecting from FTs of previous priority of prio because there should be multiple prevs after this fs_prio type is introduced. And also the next FT should be chosen from the first flow table next to the prio in the same FS_TYPE_PRIO_CHAINS fs_prio, if this prio is the first child. Fixes: 328edb499f99 ("net/mlx5: Split FDB fast path prio to multiple namespaces") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/7a95754df479e722038996c97c97b062b372591f.1690803944.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 03 August 2023, 01:38:42 UTC
618d28a net/mlx5: fs_core: Make find_closest_ft more generic As find_closest_ft_recursive is called to find the closest FT, the first parameter of find_closest_ft can be changed from fs_prio to fs_node. Thus this function is extended to find the closest FT for the nodes of any type, not only prios, but also the sub namespaces. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/d3962c2b443ec8dde7a740dc742a1f052d5e256c.1690803944.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 03 August 2023, 01:38:42 UTC
ec351c8 Merge tag 'soc-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A couple of platforms get a lone dts fix each: - SoCFPGA: Fix incorrect I2C property for SCL signal - Renesas: Fix interrupt names for MTU3 channels on RZ/G2L and RZ/V2L. - Juno/Vexpress: remove a dangling symlink - at91: sam9x60 SoC detection compatible strings - nspire: Fix arm primecell compatible string On the NXP i.MX platform, there multiple issues that get addressed: - A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU frequency of sk-imx53 board - Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux - A couple of imx8mm-venice fixes from Tim Harvey to diable disp_blk_ctrl - A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct VPU label and gpio-line-names - Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as bus_power_dev child, so that runtime PM can translate into the necessary GPC power domain action On the driver side, there are two fixes for tegra memory controller drivers addressing regressions from the merge window, a couple of minor correctness fixes for SCMI and SMCCC firmware, as well as a build fix for an lcd backlight driver" * tag 'soc-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits) backlight: corgi_lcd: fix missing prototype memory: tegra: make icc_set_bw return zero if BWMGR not supported arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels dt-bindings: serial: atmel,at91-usart: update compatible for sam9x60 ARM: dts: at91: sam9x60: fix the SOC detection ARM: dts: nspire: Fix arm primecell compatible string firmware: arm_scmi: Fix chan_free cleanup on SMC firmware: arm_scmi: Drop OF node reference in the transport channel setup soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child ARM: dts: nxp/imx: limit sk-imx53 supported frequencies firmware: arm_scmi: Fix signed error return values handling firmware: smccc: Fix use of uninitialised results structure arm64: dts: freescale: Fix VPU G2 clock arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux arm64: dts: phycore-imx8mm: Correction in gpio-line-names arm64: dts: phycore-imx8mm: Label typo-fix of VPU ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlink ... 03 August 2023, 01:21:12 UTC
a4e98a3 Merge tag 'bitmap-6.5-rc5' of https://github.com:/norov/linux Pull bitmap fixes from Yury Norov: - Fix for bitmap documentation - Fix for kernel build under certain configurations * tag 'bitmap-6.5-rc5' of https://github.com:/norov/linux: lib/bitmap: workaround const_eval test build failure cpumask: eliminate kernel-doc warnings 03 August 2023, 01:10:26 UTC
6ad0f2f Drivers: hv: vmbus: Remove unused extern declaration vmbus_ontimer() Since commit 30fbee49b071 ("Staging: hv: vmbus: Get rid of the unused function vmbus_ontimer()") this is not used anymore, so can remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20230725142108.27280-1-yuehaibing@huawei.com Signed-off-by: Wei Liu <wei.liu@kernel.org> 02 August 2023, 23:29:08 UTC
9e2d0c3 x86/hyperv: add noop functions to x86_init mpparse functions Hyper-V can run VMs at different privilege "levels" known as Virtual Trust Levels (VTL). Sometimes, it chooses to run two different VMs at different levels but they share some of their address space. In such setups VTL2 (higher level VM) has visibility of all of the VTL0 (level 0) memory space. When the CONFIG_X86_MPPARSE is enabled for VTL2, the VTL2 kernel performs a search within the low memory to locate MP tables. However, in systems where VTL0 manages the low memory and may contain valid tables, this scanning can result in incorrect MP table information being provided to the VTL2 kernel, mistakenly considering VTL0's MP table as its own Add noop functions to avoid MP parse scan by VTL2. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/r/1687537688-5397-1-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> 02 August 2023, 23:09:53 UTC
640c503 Documentation: kdump: Add va_kernel_pa_offset for RISCV64 RISC-V Linux exports "va_kernel_pa_offset" in vmcoreinfo to help Crash-utility translate the kernel virtual address correctly. Here adds the definition of "va_kernel_pa_offset". Fixes: 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") Link: https://lore.kernel.org/linux-riscv/20230724040649.220279-1-suagrfillet@gmail.com/ Signed-off-by: Song Shuai <suagrfillet@gmail.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230724100917.309061-2-suagrfillet@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 02 August 2023, 20:50:37 UTC
fbe7d19 riscv: Export va_kernel_pa_offset in vmcoreinfo Since RISC-V Linux v6.4, the commit 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") changes phys_ram_base from the physical start of the kernel to the actual start of the DRAM. The Crash-utility's VTOP() still uses phys_ram_base and kernel_map.virt_addr to translate kernel virtual address, that failed the Crash with Linux v6.4 [1]. Export kernel_map.va_kernel_pa_offset in vmcoreinfo to help Crash translate the kernel virtual address correctly. Fixes: 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") Link: https://lore.kernel.org/linux-riscv/20230724040649.220279-1-suagrfillet@gmail.com/ [1] Signed-off-by: Song Shuai <suagrfillet@gmail.com> Reviewed-by: Xianting Tian  <xianting.tian@linux.alibaba.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230724100917.309061-1-suagrfillet@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 02 August 2023, 20:50:31 UTC
568701f RISC-V: ACPI: Fix acpi_os_ioremap to return iomem address acpi_os_ioremap() currently is a wrapper to memremap() on RISC-V. But the callers of acpi_os_ioremap() expect it to return __iomem address and hence sparse tool reports a new warning. Fix this issue by type casting to __iomem type. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202307230357.egcTAefj-lkp@intel.com/ Fixes: a91a9ffbd3a5 ("RISC-V: Add support to build the ACPI core") Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230724100346.1302937-1-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 02 August 2023, 20:49:43 UTC
2569606 selftests: riscv: Fix compilation error with vstate_exec_nolibc.c The following error happens: In file included from vstate_exec_nolibc.c:2: /usr/include/riscv64-linux-gnu/sys/prctl.h:42:12: error: conflicting types for ‘prctl’; h ave ‘int(int, ...)’ 42 | extern int prctl (int __option, ...) __THROW; | ^~~~~ In file included from ./../../../../include/nolibc/nolibc.h:99, from <command-line>: ./../../../../include/nolibc/sys.h:892:5: note: previous definition of ‘prctl’ with type ‘int(int, long unsigned int, long unsigned int, long unsigned int, long unsigned int) ’ 892 | int prctl(int option, unsigned long arg2, unsigned long arg3, | ^~~~~ Fix this by not including <sys/prctl.h>, which is not needed here since prctl syscall is directly called using its number. Fixes: 7cf6198ce22d ("selftests: Test RISC-V Vector prctl interface") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230713115829.110421-1-alexghiti@rivosinc.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 02 August 2023, 20:48:10 UTC
8c82d2b selftests/riscv: fix potential build failure during the "emit_tests" step The riscv selftests (which were modeled after the arm64 selftests) are improperly declaring the "emit_tests" target to depend upon the "all" target. This approach, when combined with commit 9fc96c7c19df ("selftests: error out if kernel header files are not yet built"), has caused build failures [1] on arm64, and is likely to cause similar failures for riscv. To fix this, simply remove the unnecessary "all" dependency from the emit_tests target. The dependency is still effectively honored, because again, invocation is via "install", which also depends upon "all". An alternative approach would be to harden the emit_tests target so that it can depend upon "all", but that's a lot more complicated and hard to get right, and doesn't seem worth it, especially given that emit_tests should probably not be overridden at all. [1] https://lore.kernel.org/20230710-kselftest-fix-arm64-v1-1-48e872844f25@kernel.org Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230712193514.740033-1-jhubbard@nvidia.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 02 August 2023, 20:47:47 UTC
4b95459 Merge tag 'exfat-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat Pull exfat fixes from Namjae Jeon: - Fix page allocation failure from allocation bitmap by using kvmalloc_array/kvfree - Add the check to validate if filename entries exceeds max filename length - Fix potential deadlock condition from dir_emit*() * tag 'exfat-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: release s_lock before calling dir_emit() exfat: check if filename entries exceeds max filename length exfat: use kvmalloc_array/kvfree instead of kmalloc_array/kfree 02 August 2023, 18:43:06 UTC
11260c3 smb: client: fix dfs link mount against w2k8 Customer reported that they couldn't mount their DFS link that was seen by the client as a DFS interlink -- special form of DFS link where its single target may point to a different DFS namespace -- and it turned out that it was just a regular DFS link where its referral header flags missed the StorageServers bit thus making the client think it couldn't tree connect to target directly without requiring further referrals. When the DFS link referral header flags misses the StoraServers bit and its target doesn't respond to any referrals, then tree connect to it. Fixes: a1c0d00572fc ("cifs: share dfs connections and supers") Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> 02 August 2023, 18:36:12 UTC
79d65ee Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three small fixes, all in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: pm80xx: Fix error return code in pm8001_pci_probe() scsi: zfcp: Defer fc_rport blocking until after ADISC response scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices 02 August 2023, 18:04:27 UTC
79e8328 word-at-a-time: use the same return type for has_zero regardless of endianness Compiling big-endian targets with Clang produces the diagnostic: fs/namei.c:2173:13: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] } while (!(has_zero(a, &adata, &constants) | has_zero(b, &bdata, &constants))); ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ || fs/namei.c:2173:13: note: cast one or both operands to int to silence this warning It appears that when has_zero was introduced, two definitions were produced with different signatures (in particular different return types). Looking at the usage in hash_name() in fs/namei.c, I suspect that has_zero() is meant to be invoked twice per while loop iteration; using logical-or would not update `bdata` when `a` did not have zeros. So I think it's preferred to always return an unsigned long rather than a bool than update the while loop in hash_name() to use a logical-or rather than bitwise-or. [ Also changed powerpc version to do the same - Linus ] Link: https://github.com/ClangBuiltLinux/linux/issues/1832 Link: https://lore.kernel.org/lkml/20230801-bitwise-v1-1-799bec468dc4@google.com/ Fixes: 36126f8f2ed8 ("word-at-a-time: make the interfaces truly generic") Debugged-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 August 2023, 17:23:36 UTC
86582e6 powerpc/powermac: Use early_* IO variants in via_calibrate_decr() On a powermac platform, via the call path: start_kernel() time_init() ppc_md.calibrate_decr() (pmac_calibrate_decr) via_calibrate_decr() ioremap() and iounmap() are called. The unmap can enable interrupts unexpectedly (cond_resched() in vunmap_pmd_range()), which causes a warning later in the boot sequence in start_kernel(). Use the early_* variants of these IO functions to prevent this. The issue is pre-existing, but is surfaced by commit 721255b9826b ("genirq: Use a maple tree for interrupt descriptor management"). Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230706010816.72682-1-bgray@linux.ibm.com 02 August 2023, 12:57:22 UTC
16e455a wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1() Using brcmfmac with 6.5-rc3 on a brcmfmac43241b4-sdio triggers a backtrace caused by the following field-spanning warning: memcpy: detected field-spanning write (size 120) of single field "&params_le->channel_list[0]" at drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:1072 (size 2) The driver still works after this warning. The warning was introduced by the new field-spanning write checks which were enabled recently. Fix this by replacing the channel_list[1] declaration at the end of the struct with a flexible array declaration. Most users of struct brcmf_scan_params_le calculate the size to alloc using the size of the non flex-array part of the struct + needed extra space, so they do not care about sizeof(struct brcmf_scan_params_le). brcmf_notify_escan_complete() however uses the struct on the stack, expecting there to be room for at least 1 entry in the channel-list to store the special -1 abort channel-id. To make this work use an anonymous union with a padding member added + the actual channel_list flexible array. Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230729140500.27892-1-hdegoede@redhat.com 02 August 2023, 10:34:16 UTC
0756384 vxlan: Fix nexthop hash size The nexthop code expects a 31 bit hash, such as what is returned by fib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hash returned by skb_get_hash() can lead to problems related to the fact that 'int hash' is a negative number when the MSB is set. In the case of hash threshold nexthop groups, nexthop_select_path_hthr() will disproportionately select the first nexthop group entry. In the case of resilient nexthop groups, nexthop_select_path_res() may do an out of bounds access in nh_buckets[], for example: hash = -912054133 num_nh_buckets = 2 bucket_index = 65535 which leads to the following panic: BUG: unable to handle page fault for address: ffffc900025910c8 PGD 100000067 P4D 100000067 PUD 10026b067 PMD 0 Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI CPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:nexthop_select_path+0x197/0xbf0 Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85 RSP: 0018:ffff88810c36f260 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8 RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219 R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0 R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900 FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc900025910c8 CR3: 0000000129d00000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x1ee/0x5c0 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? __pfx_page_fault_oops+0x10/0x10 ? search_bpf_extables+0xfe/0x1c0 ? fixup_exception+0x3b/0x470 ? exc_page_fault+0xf6/0x110 ? asm_exc_page_fault+0x26/0x30 ? nexthop_select_path+0x197/0xbf0 ? nexthop_select_path+0x197/0xbf0 ? lock_is_held_type+0xe7/0x140 vxlan_xmit+0x5b2/0x2340 ? __lock_acquire+0x92b/0x3370 ? __pfx_vxlan_xmit+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_register_lock_class+0x10/0x10 ? skb_network_protocol+0xce/0x2d0 ? dev_hard_start_xmit+0xca/0x350 ? __pfx_vxlan_xmit+0x10/0x10 dev_hard_start_xmit+0xca/0x350 __dev_queue_xmit+0x513/0x1e20 ? __pfx___dev_queue_xmit+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? mark_held_locks+0x44/0x90 ? skb_push+0x4c/0x80 ? eth_header+0x81/0xe0 ? __pfx_eth_header+0x10/0x10 ? neigh_resolve_output+0x215/0x310 ? ip6_finish_output2+0x2ba/0xc90 ip6_finish_output2+0x2ba/0xc90 ? lock_release+0x236/0x3e0 ? ip6_mtu+0xbb/0x240 ? __pfx_ip6_finish_output2+0x10/0x10 ? find_held_lock+0x83/0xa0 ? lock_is_held_type+0xe7/0x140 ip6_finish_output+0x1ee/0x780 ip6_output+0x138/0x460 ? __pfx_ip6_output+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_ip6_finish_output+0x10/0x10 NF_HOOK.constprop.0+0xc0/0x420 ? __pfx_NF_HOOK.constprop.0+0x10/0x10 ? ndisc_send_skb+0x2c0/0x960 ? __pfx_lock_release+0x10/0x10 ? __local_bh_enable_ip+0x93/0x110 ? lock_is_held_type+0xe7/0x140 ndisc_send_skb+0x4be/0x960 ? __pfx_ndisc_send_skb+0x10/0x10 ? mark_held_locks+0x65/0x90 ? find_held_lock+0x83/0xa0 ndisc_send_ns+0xb0/0x110 ? __pfx_ndisc_send_ns+0x10/0x10 addrconf_dad_work+0x631/0x8e0 ? lock_acquire+0x180/0x3f0 ? __pfx_addrconf_dad_work+0x10/0x10 ? mark_held_locks+0x24/0x90 process_one_work+0x582/0x9c0 ? __pfx_process_one_work+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? mark_held_locks+0x24/0x90 worker_thread+0x93/0x630 ? __kthread_parkme+0xdc/0x100 ? __pfx_worker_thread+0x10/0x10 kthread+0x1a5/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 RIP: 0000:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0000:0000000000000000 EFLAGS: 00000000 ORIG_RAX: 0000000000000000 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: CR2: ffffc900025910c8 ---[ end trace 0000000000000000 ]--- RIP: 0010:nexthop_select_path+0x197/0xbf0 Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85 RSP: 0018:ffff88810c36f260 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8 RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219 R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0 R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900 FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000129d00000 CR4: 0000000000750ee0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x2ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fix this problem by ensuring the MSB of hash is 0 using a right shift - the same approach used in fib_multipath_hash() and rt6_multipath_hash(). Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 02 August 2023, 09:58:26 UTC
30e0191 ip6mr: Fix skb_under_panic in ip6mr_cache_report() skbuff: skb_under_panic: text:ffffffff88771f69 len:56 put:-4 head:ffff88805f86a800 data:ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:192! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a #236 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x152/0x1d0 Call Trace: <TASK> skb_push+0xc4/0xe0 ip6mr_cache_report+0xd69/0x19b0 reg_vif_xmit+0x406/0x690 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 vlan_dev_hard_start_xmit+0x3ab/0x5c0 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 neigh_connected_output+0x3ed/0x570 ip6_finish_output2+0x5b5/0x1950 ip6_finish_output+0x693/0x11c0 ip6_output+0x24b/0x880 NF_HOOK.constprop.0+0xfd/0x530 ndisc_send_skb+0x9db/0x1400 ndisc_send_rs+0x12a/0x6c0 addrconf_dad_completed+0x3c9/0xea0 addrconf_dad_work+0x849/0x1420 process_one_work+0xa22/0x16e0 worker_thread+0x679/0x10c0 ret_from_fork+0x28/0x60 ret_from_fork_asm+0x11/0x20 When setup a vlan device on dev pim6reg, DAD ns packet may sent on reg_vif_xmit(). reg_vif_xmit() ip6mr_cache_report() skb_push(skb, -skb_network_offset(pkt));//skb_network_offset(pkt) is 4 And skb_push declared as: void *skb_push(struct sk_buff *skb, unsigned int len); skb->data -= len; //0xffff88805f86a84c - 0xfffffffc = 0xffff887f5f86a850 skb->data is set to 0xffff887f5f86a850, which is invalid mem addr, lead to skb_push() fails. Fixes: 14fb64e1f449 ("[IPV6] MROUTE: Support PIM-SM (SSM).") Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 August 2023, 09:35:21 UTC
1cfef80 s390/qeth: Don't call dev_close/dev_open (DOWN/UP) dev_close() and dev_open() are issued to change the interface state to DOWN or UP (dev->flags IFF_UP). When the netdev is set DOWN it loses e.g its Ipv6 addresses and routes. We don't want this in cases of device recovery (triggered by hardware or software) or when the qeth device is set offline. Setting a qeth device offline or online and device recovery actions call netif_device_detach() and/or netif_device_attach(). That will reset or set the LOWER_UP indication i.e. change the dev->state Bit __LINK_STATE_PRESENT. That is enough to e.g. cause bond failovers, and still preserves the interface settings that are handled by the network stack. Don't call dev_open() nor dev_close() from the qeth device driver. Let the network stack handle this. Fixes: d4560150cb47 ("s390/qeth: call dev_close() during recovery") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 August 2023, 09:12:51 UTC
666c135 Merge branch 'tun-tap-uid' Laszlo Ersek says: ==================== tun/tap: set sk_uid from current_fsuid() The original patches fixing CVE-2023-1076 are incorrect in my opinion. This small series fixes them up; see the individual commit messages for explanation. I have a very elaborate test procedure demonstrating the problem for both tun and tap; it involves libvirt, qemu, and "crash". I can share that procedure if necessary, but it's indeed quite long (I wrote it originally for our QE team). The patches in this series are supposed to "re-fix" CVE-2023-1076; given that said CVE is classified as Low Impact (CVSSv3=5.5), I'm posting this publicly, and not suggesting any embargo. Red Hat Product Security may assign a new CVE number later. I've tested the patches on top of v6.5-rc4, with "crash" built at commit c74f375e0ef7. Cc: Eric Dumazet <edumazet@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Pietro Borrello <borrello@diag.uniroma1.it> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 02 August 2023, 09:06:06 UTC
5c9241f net: tap_open(): set sk_uid from current_fsuid() Commit 66b2c338adce initializes the "sk_uid" field in the protocol socket (struct sock) from the "/dev/tapX" device node's owner UID. Per original commit 86741ec25462 ("net: core: Add a UID field to struct sock.", 2016-11-04), that's wrong: the idea is to cache the UID of the userspace process that creates the socket. Commit 86741ec25462 mentions socket() and accept(); with "tap", the action that creates the socket is open("/dev/tapX"). Therefore the device node's owner UID is irrelevant. In most cases, "/dev/tapX" will be owned by root, so in practice, commit 66b2c338adce has no observable effect: - before, "sk_uid" would be zero, due to undefined behavior (CVE-2023-1076), - after, "sk_uid" would be zero, due to "/dev/tapX" being owned by root. What matters is the (fs)UID of the process performing the open(), so cache that in "sk_uid". Cc: Eric Dumazet <edumazet@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Pietro Borrello <borrello@diag.uniroma1.it> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 66b2c338adce ("tap: tap_open(): correctly initialize socket uid") Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 August 2023, 09:06:06 UTC
9bc3047 net: tun_chr_open(): set sk_uid from current_fsuid() Commit a096ccca6e50 initializes the "sk_uid" field in the protocol socket (struct sock) from the "/dev/net/tun" device node's owner UID. Per original commit 86741ec25462 ("net: core: Add a UID field to struct sock.", 2016-11-04), that's wrong: the idea is to cache the UID of the userspace process that creates the socket. Commit 86741ec25462 mentions socket() and accept(); with "tun", the action that creates the socket is open("/dev/net/tun"). Therefore the device node's owner UID is irrelevant. In most cases, "/dev/net/tun" will be owned by root, so in practice, commit a096ccca6e50 has no observable effect: - before, "sk_uid" would be zero, due to undefined behavior (CVE-2023-1076), - after, "sk_uid" would be zero, due to "/dev/net/tun" being owned by root. What matters is the (fs)UID of the process performing the open(), so cache that in "sk_uid". Cc: Eric Dumazet <edumazet@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Pietro Borrello <borrello@diag.uniroma1.it> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Fixes: a096ccca6e50 ("tun: tun_chr_open(): correctly initialize socket uid") Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 August 2023, 09:06:06 UTC
c71b7aa drm/panel: samsung-s6d7aa0: Add MODULE_DEVICE_TABLE The driver can be built as a module, however the lack of the MODULE_DEVICE_TABLE macro prevents it from being automatically probed from the DT in such case. Add the missed macro to make sure the module can load automatically. Fixes: 6810bb390282 ("drm/panel: Add Samsung S6D7AA0 panel controller driver") Signed-off-by: Nikita Travkin <nikita@trvn.ru> Acked-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230802-gt5-panel-dtable-v1-1-c0a765c175e2@trvn.ru 02 August 2023, 08:56:50 UTC
0a85890 ata,scsi: do not issue START STOP UNIT on resume During system resume, ata_port_pm_resume() triggers ata EH to 1) Resume the controller 2) Reset and rescan the ports 3) Revalidate devices This EH execution is started asynchronously from ata_port_pm_resume(), which means that when sd_resume() is executed, none or only part of the above processing may have been executed. However, sd_resume() issues a START STOP UNIT to wake up the drive from sleep mode. This command is translated to ATA with ata_scsi_start_stop_xlat() and issued to the device. However, depending on the state of execution of the EH process and revalidation triggerred by ata_port_pm_resume(), two things may happen: 1) The START STOP UNIT fails if it is received before the controller has been reenabled at the beginning of the EH execution. This is visible with error messages like: ata10.00: device reported invalid CHS sector 0 sd 9:0:0:0: [sdc] Start/Stop Unit failed: Result: hostbyte=DID_OK driverbyte=DRIVER_OK sd 9:0:0:0: [sdc] Sense Key : Illegal Request [current] sd 9:0:0:0: [sdc] Add. Sense: Unaligned write command sd 9:0:0:0: PM: dpm_run_callback(): scsi_bus_resume+0x0/0x90 returns -5 sd 9:0:0:0: PM: failed to resume async: error -5 2) The START STOP UNIT command is received while the EH process is on-going, which mean that it is stopped and must wait for its completion, at which point the command is rather useless as the drive is already fully spun up already. This case results also in a significant delay in sd_resume() which is observable by users as the entire system resume completion is delayed. Given that ATA devices will be woken up by libata activity on resume, sd_resume() has no need to issue a START STOP UNIT command, which solves the above mentioned problems. Do not issue this command by introducing the new scsi_device flag no_start_on_resume and setting this flag to 1 in ata_scsi_dev_config(). sd_resume() is modified to issue a START STOP UNIT command only if this flag is not set. Reported-by: Paul Ausbeck <paula@soe.ucsc.edu> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215880 Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Tanner Watkins <dalzot@gmail.com> Tested-by: Paul Ausbeck <paula@soe.ucsc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> 02 August 2023, 08:01:12 UTC
0bc057e Merge tag 'gvt-fixes-2023-08-02' of https://github.com/intel/gvt-linux into drm-intel-fixes gvt-fixes-2023-08-02 - Fix bug to get AUX CH register message length (Yan) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZMnvf46JqgeIuTir@debian-scheme 02 August 2023, 07:14:57 UTC
e6e2843 libceph: fix potential hang in ceph_osdc_notify() If the cluster becomes unavailable, ceph_osdc_notify() may hang even with osd_request_timeout option set because linger_notify_finish_wait() waits for MWatchNotify NOTIFY_COMPLETE message with no associated OSD request in flight -- it's completely asynchronous. Introduce an additional timeout, derived from the specified notify timeout. While at it, switch both waits to killable which is more correct. Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Reviewed-by: Xiubo Li <xiubli@redhat.com> 02 August 2023, 07:07:34 UTC
9d01e07 rbd: prevent busy loop when requesting exclusive lock Due to rbd_try_acquire_lock() effectively swallowing all but EBLOCKLISTED error from rbd_try_lock() ("request lock anyway") and rbd_request_lock() returning ETIMEDOUT error not only for an actual notify timeout but also when the lock owner doesn't respond, a busy loop inside of rbd_acquire_lock() between rbd_try_acquire_lock() and rbd_request_lock() is possible. Requesting the lock on EBUSY error (returned by get_lock_owner_info() if an incompatible lock or invalid lock owner is detected) makes very little sense. The same goes for ETIMEDOUT error (might pop up pretty much anywhere if osd_request_timeout option is set) and many others. Just fail I/O requests on rbd_dev->acquiring_list immediately on any error from rbd_try_lock(). Cc: stable@vger.kernel.org # 588159009d5b: rbd: retrieve and check lock owner twice before blocklisting Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn> 02 August 2023, 07:07:34 UTC
31d49ba net: dcb: choose correct policy to parse DCB_ATTR_BCN The dcbnl_bcn_setcfg uses erroneous policy to parse tb[DCB_ATTR_BCN], which is introduced in commit 859ee3c43812 ("DCB: Add support for DCB BCN"). Please see the comment in below code static int dcbnl_bcn_setcfg(...) { ... ret = nla_parse_nested_deprecated(..., dcbnl_pfc_up_nest, .. ) // !!! dcbnl_pfc_up_nest for attributes // DCB_PFC_UP_ATTR_0 to DCB_PFC_UP_ATTR_ALL in enum dcbnl_pfc_up_attrs ... for (i = DCB_BCN_ATTR_RP_0; i <= DCB_BCN_ATTR_RP_7; i++) { // !!! DCB_BCN_ATTR_RP_0 to DCB_BCN_ATTR_RP_7 in enum dcbnl_bcn_attrs ... value_byte = nla_get_u8(data[i]); ... } ... for (i = DCB_BCN_ATTR_BCNA_0; i <= DCB_BCN_ATTR_RI; i++) { // !!! DCB_BCN_ATTR_BCNA_0 to DCB_BCN_ATTR_RI in enum dcbnl_bcn_attrs ... value_int = nla_get_u32(data[i]); ... } ... } That is, the nla_parse_nested_deprecated uses dcbnl_pfc_up_nest attributes to parse nlattr defined in dcbnl_pfc_up_attrs. But the following access code fetch each nlattr as dcbnl_bcn_attrs attributes. By looking up the associated nla_policy for dcbnl_bcn_attrs. We can find the beginning part of these two policies are "same". static const struct nla_policy dcbnl_pfc_up_nest[...] = { [DCB_PFC_UP_ATTR_0] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_1] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_2] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_3] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_4] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_5] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_6] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_7] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_ALL] = {.type = NLA_FLAG}, }; static const struct nla_policy dcbnl_bcn_nest[...] = { [DCB_BCN_ATTR_RP_0] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_1] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_2] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_3] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_4] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_5] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_6] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_7] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_ALL] = {.type = NLA_FLAG}, // from here is somewhat different [DCB_BCN_ATTR_BCNA_0] = {.type = NLA_U32}, ... [DCB_BCN_ATTR_ALL] = {.type = NLA_FLAG}, }; Therefore, the current code is buggy and this nla_parse_nested_deprecated could overflow the dcbnl_pfc_up_nest and use the adjacent nla_policy to parse attributes from DCB_BCN_ATTR_BCNA_0. Hence use the correct policy dcbnl_bcn_nest to parse the nested tb[DCB_ATTR_BCN] TLV. Fixes: 859ee3c43812 ("DCB: Add support for DCB BCN") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230801013248.87240-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> 02 August 2023, 04:07:46 UTC
e7e607b ceph: defer stopping mdsc delayed_work Flushing the dirty buffer may take a long time if the cluster is overloaded or if there is network issue. So we should ping the MDSs periodically to keep alive, else the MDS will blocklist the kclient. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/61843 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> 01 August 2023, 22:13:02 UTC
4a4474e Merge branch 'bnxt_en-2-xdp-bug-fixes' Michael Chan says: ==================== bnxt_en: 2 XDP bug fixes The first patch fixes XDP page pool logic on systems with page size >= 64K. The second patch fixes the max_mtu setting when an XDP program supporting multi buffers is attached. ==================== Link: https://lore.kernel.org/r/20230731142043.58855-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 01 August 2023, 22:05:00 UTC
08450ea bnxt_en: Fix max_mtu setting for multi-buf XDP The existing code does not allow the MTU to be set to the maximum even after an XDP program supporting multiple buffers is attached. Fix it to set the netdev->max_mtu to the maximum value if the attached XDP program supports mutiple buffers, regardless of the current MTU value. Also use a local variable dev instead of repeatedly using bp->dev. Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20230731142043.58855-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 01 August 2023, 22:04:58 UTC
f6974b4 bnxt_en: Fix page pool logic for page size >= 64K The RXBD length field on all bnxt chips is 16-bit and so we cannot support a full page when the native page size is 64K or greater. The non-XDP (non page pool) code path has logic to handle this but the XDP page pool code path does not handle this. Add the missing logic to use page_pool_dev_alloc_frag() to allocate 32K chunks if the page size is 64K or greater. Fixes: 9f4b28301ce6 ("bnxt: XDP multibuffer enablement") Link: https://lore.kernel.org/netdev/20230728231829.235716-2-michael.chan@broadcom.com/ Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20230731142043.58855-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 01 August 2023, 22:04:58 UTC
3ff1617 selftest: net: Assert on a proper value in so_incoming_cpu.c. Dan Carpenter reported an error spotted by Smatch. ./tools/testing/selftests/net/so_incoming_cpu.c:163 create_clients() error: uninitialized symbol 'ret'. The returned value of sched_setaffinity() should be checked with ASSERT_EQ(), but the value was not saved in a proper variable, resulting in an error above. Let's save the returned value of with sched_setaffinity(). Fixes: 6df96146b202 ("selftest: Add test for SO_INCOMING_CPU.") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-kselftest/fe376760-33b6-4fc9-88e8-178e809af1ac@moroto.mountain/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230731181553.5392-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 01 August 2023, 22:02:58 UTC
f3bb775 net: netsec: Ignore 'phy-mode' on SynQuacer in DT mode As documented in acd7aaf51b20 ("netsec: ignore 'phy-mode' device property on ACPI systems") the SocioNext SynQuacer platform ships with firmware defining the PHY mode as RGMII even though the physical configuration of the PHY is for TX and RX delays. Since bbc4d71d63549bc ("net: phy: realtek: fix rtl8211e rx/tx delay config") this has caused misconfiguration of the PHY, rendering the network unusable. This was worked around for ACPI by ignoring the phy-mode property but the system is also used with DT. For DT instead if we're running on a SynQuacer force a working PHY mode, as well as the standard EDK2 firmware with DT there are also some of these systems that use u-boot and might not initialise the PHY if not netbooting. Newer firmware imagaes for at least EDK2 are available from Linaro so print a warning when doing this. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230731-synquacer-net-v3-1-944be5f06428@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 01 August 2023, 21:59:45 UTC
0b6291a net: korina: handle clk prepare error in korina_probe() in korina_probe(), the return value of clk_prepare_enable() should be checked since it might fail. we can use devm_clk_get_optional_enabled() instead of devm_clk_get_optional() and clk_prepare_enable() to automatically handle the error. Fixes: e4cd854ec487 ("net: korina: Get mdio input clock via common clock framework") Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Link: https://lore.kernel.org/r/20230731090535.21416-1-ruc_gongyuanjun@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 01 August 2023, 21:58:34 UTC
b99225b USB: zaurus: Add ID for A-300/B-500/C-700 The SL-A300, B500/5600, and C700 devices no longer auto-load because of "usbnet: Remove over-broad module alias from zaurus." This patch adds IDs for those 3 devices. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217632 Fixes: 16adf5d07987 ("usbnet: Remove over-broad module alias from zaurus.") Signed-off-by: Ross Maynard <bids.7405@bigpond.com> Cc: stable@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/69b5423b-2013-9fc9-9569-58e707d9bafb@bigpond.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 01 August 2023, 21:44:27 UTC
ef45e84 net: ll_temac: fix error checking of irq_of_parse_and_map() Most kernel functions return negative error codes but some irq functions return zero on error. In this code irq_of_parse_and_map(), returns zero and platform_get_irq() returns negative error codes. We need to handle both cases appropriately. Fixes: 8425c41d1ef7 ("net: ll_temac: Extend support to non-device-tree platforms") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Esben Haabendal <esben@geanix.com> Reviewed-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Harini Katakam <harini.katakam@amd.com> Link: https://lore.kernel.org/r/3d0aef75-06e0-45a5-a2a6-2cc4738d4143@moroto.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org> 01 August 2023, 21:38:17 UTC
388acb4 s390/ptrace: add missing linux/const.h include Adrian Reber reported the following CRIU build bug after commit b8af5999779d ("s390/ptrace: make all psw related defines also available for asm"): compel/arch/s390/src/lib/infect.c: In function 'arch_can_dump_task': compel/arch/s390/src/lib/infect.c:523:25: error: 'UL' undeclared (first use in this function) 523 | if (psw->mask & PSW_MASK_RI) { | ^~~~~~~~~~~ Add the missing linux/const.h include to fix this. Reported-by: Adrian Reber <areber@redhat.com> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2225745 Link: https://github.com/checkpoint-restore/criu/pull/2232 Tested-by: Adrian Reber <areber@redhat.com> Fixes: b8af5999779d ("s390/ptrace: make all psw related defines also available for asm") Link: https://lore.kernel.org/r/20230731183926.330932-1-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> 01 August 2023, 14:47:03 UTC
1d7dd5a wifi: ray_cs: Replace 1-element array with flexible array The trailing array member of struct tx_buf was defined as a 1-element array, but used as a flexible array. This was resulting in build warnings: In function 'fortify_memset_chk', inlined from 'memset_io' at /kisskb/src/arch/mips/include/asm/io.h:486:2, inlined from 'build_auth_frame' at /kisskb/src/drivers/net/wireless/legacy/ray_cs.c:2697:2: /kisskb/src/include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 493 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Replace it with an actual flexible array. Binary difference comparison shows a single change in output: │ drivers/net/wireless/legacy/ray_cs.c:883 │ lea 0x1c(%rbp),%r13d │ - cmp $0x7c3,%r13d │ + cmp $0x7c4,%r13d This is from: if (len + TX_HEADER_LENGTH > TX_BUF_SIZE) { specifically: #define TX_BUF_SIZE (2048 - sizeof(struct tx_msg)) This appears to have been originally buggy, so the change is correct. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Closes: https://lore.kernel.org/all/88f83d73-781d-bdc-126-aa629cb368c@linux-m68k.org Cc: Kalle Valo <kvalo@kernel.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230728231245.never.309-kees@kernel.org 01 August 2023, 13:40:13 UTC
16e95a6 powercap: intel_rapl: Fix a sparse warning in TPMI interface Depends on the interface used, the RAPL registers can be either MSR indexes or memory mapped IO addresses. Current RAPL common code uses u64 to save both MSR and memory mapped IO registers. With this, when handling register address with an __iomem annotation, it triggers a sparse warning like below: sparse warnings: (new ones prefixed by >>) >> drivers/powercap/intel_rapl_tpmi.c:141:41: sparse: sparse: incorrect type in initializer (different address spaces) @@ expected unsigned long long [usertype] *tpmi_rapl_regs @@ got void [noderef] __iomem * @@ drivers/powercap/intel_rapl_tpmi.c:141:41: sparse: expected unsigned long long [usertype] *tpmi_rapl_regs drivers/powercap/intel_rapl_tpmi.c:141:41: sparse: got void [noderef] __iomem * Fix the problem by using a union to save the registers instead. Suggested-by: David Laight <David.Laight@ACULAB.COM> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202307031405.dy3druuy-lkp@intel.com/ Tested-by: Wang Wendy <wendy.wang@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 01 August 2023, 11:45:08 UTC
2dc0bc1 powerpc/64e: Fix secondary thread bringup for ELFv2 kernels When booting on e6500 with an ELF v2 ABI kernel, the secondary threads do not start correctly: [ 0.051118] smp: Bringing up secondary CPUs ... [ 5.072700] Processor 1 is stuck. This occurs because the startup code is written to use function descriptors when loading the entry point for the secondary threads. When building with ELF v2 ABI there are no function descriptors, and the code loads junk values for the entry point address. Fix it by using ppc_function_entry() in C, and DOTSYM() in asm, both of which work correctly for ELF v2 ABI as well as ELF v1 ABI kernels. Fixes: 8c5fa3b5c4df ("powerpc/64: Make ELFv2 the default for big-endian builds") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230801102650.48705-1-mpe@ellerman.id.au 01 August 2023, 11:01:27 UTC
a337b64 drm/i915: Fix premature release of request's reusable memory Infinite waits for completion of GPU activity have been observed in CI, mostly inside __i915_active_wait(), triggered by igt@gem_barrier_race or igt@perf@stress-open-close. Root cause analysis, based of ftrace dumps generated with a lot of extra trace_printk() calls added to the code, revealed loops of request dependencies being accidentally built, preventing the requests from being processed, each waiting for completion of another one's activity. After we substitute a new request for a last active one tracked on a timeline, we set up a dependency of our new request to wait on completion of current activity of that previous one. While doing that, we must take care of keeping the old request still in memory until we use its attributes for setting up that await dependency, or we can happen to set up the await dependency on an unrelated request that already reuses the memory previously allocated to the old one, already released. Combined with perf adding consecutive kernel context remote requests to different user context timelines, unresolvable loops of await dependencies can be built, leading do infinite waits. We obtain a pointer to the previous request to wait upon when we substitute it with a pointer to our new request in an active tracker, e.g. in intel_timeline.last_request. In some processing paths we protect that old request from being freed before we use it by getting a reference to it under RCU protection, but in others, e.g. __i915_request_commit() -> __i915_request_add_to_timeline() -> __i915_request_ensure_ordering(), we don't. But anyway, since the requests' memory is SLAB_FAILSAFE_BY_RCU, that RCU protection is not sufficient against reuse of memory. We could protect i915_request's memory from being prematurely reused by calling its release function via call_rcu() and using rcu_read_lock() consequently, as proposed in v1. However, that approach leads to significant (up to 10 times) increase of SLAB utilization by i915_request SLAB cache. Another potential approach is to take a reference to the previous active fence. When updating an active fence tracker, we first lock the new fence, substitute a pointer of the current active fence with the new one, then we lock the substituted fence. With this approach, there is a time window after the substitution and before the lock when the request can be concurrently released by an interrupt handler and its memory reused, then we may happen to lock and return a new, unrelated request. Always get a reference to the current active fence first, before replacing it with a new one. Having it protected from premature release and reuse, lock it and then replace with the new one but only if not yet signalled via a potential concurrent interrupt nor replaced with another one by a potential concurrent thread, otherwise retry, starting from getting a reference to the new current one. Adjust users to not get a reference to the previous active fence themselves and always put the reference got by __i915_active_fence_set() when no longer needed. v3: Fix lockdep splat reports and other issues caused by incorrect use of try_cmpxchg() (use (cmpxchg() != prev) instead) v2: Protect request's memory by getting a reference to it in favor of delegating its release to call_rcu() (Chris) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8211 Fixes: df9f85d8582e ("drm/i915: Serialise i915_active_fence_set() with itself") Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.6+ Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230720093543.832147-2-janusz.krzysztofik@linux.intel.com (cherry picked from commit 946e047a3d88d46d15b5c5af0414098e12b243f7) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> 01 August 2023, 09:56:34 UTC
6a35f22 drm/i915/gt: Support aux invalidation on all engines Perform some refactoring with the purpose of keeping in one single place all the operations around the aux table invalidation. With this refactoring add more engines where the invalidation should be performed. Fixes: 972282c4cf24 ("drm/i915/gen12: Add aux table invalidate for all engines") Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Jonathan Cavitt <jonathan.cavitt@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: <stable@vger.kernel.org> # v5.8+ Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230725001950.1014671-8-andi.shyti@linux.intel.com (cherry picked from commit 76ff7789d6e63d1a10b3b58f5c70b2e640c7a880) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> 01 August 2023, 09:50:23 UTC
0fde2f2 drm/i915/gt: Poll aux invalidation register bit on invalidation For platforms that use Aux CCS, wait for aux invalidation to complete by checking the aux invalidation register bit is cleared. Fixes: 972282c4cf24 ("drm/i915/gen12: Add aux table invalidate for all engines") Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.8+ Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230725001950.1014671-7-andi.shyti@linux.intel.com (cherry picked from commit d459c86f00aa98028d155a012c65dc42f7c37e76) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> 01 August 2023, 09:50:16 UTC
back to top