Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
482458f wyqwxj 08 June 2017, 09:22:35 UTC Merge pull request #2 from torvalds/master merge master 08 June 2017, 09:22:34 UTC
b29794e Linus Torvalds 06 June 2017, 21:30:17 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Made TCP congestion control documentation match current reality, from Anmol Sarma. 2) Various build warning and failure fixes from Arnd Bergmann. 3) Fix SKB list leak in ipv6_gso_segment(). 4) Use after free in ravb driver, from Eugeniu Rosca. 5) Don't use udp_poll() in ping protocol driver, from Eric Dumazet. 6) Don't crash in PCI error recovery of cxgb4 driver, from Guilherme Piccoli. 7) _SRC_NAT_DONE_BIT needs to be cleared using atomics, from Liping Zhang. 8) Use after free in vxlan deletion, from Mark Bloch. 9) Fix ordering of NAPI poll enabled in ethoc driver, from Max Filippov. 10) Fix stmmac hangs with TSO, from Niklas Cassel. 11) Fix crash in CALIPSO ipv6, from Richard Haines. 12) Clear nh_flags properly on mpls link up. From Roopa Prabhu. 13) Fix regression in sk_err socket error queue handling, noticed by ping applications. From Soheil Hassas Yeganeh. 14) Update mlx4/mlx5 MAINTAINERS information. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (78 commits) net: stmmac: fix a broken u32 less than zero check net: stmmac: fix completely hung TX when using TSO net: ethoc: enable NAPI before poll may be scheduled net: bridge: fix a null pointer dereference in br_afspec ravb: Fix use-after-free on `ifconfig eth0 down` net/ipv6: Fix CALIPSO causing GPF with datagram support net: stmmac: ensure jumbo_frm error return is correctly checked for -ve value Revert "sit: reload iphdr in ipip6_rcv" i40e/i40evf: proper update of the page_offset field i40e: Fix state flags for bit set and clean operations of PF iwlwifi: fix host command memory leaks iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265 iwlwifi: mvm: clear new beacon command template struct iwlwifi: mvm: don't fail when removing a key from an inexisting sta iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3 iwlwifi: mvm: fix firmware debug restart recording iwlwifi: tt: move ucode_loaded check under mutex iwlwifi: mvm: support ibss in dqa mode iwlwifi: mvm: Fix command queue number on d0i3 flow iwlwifi: mvm: rs: start using LQ command color ... 06 June 2017, 21:30:17 UTC
e87f327 Linus Torvalds 06 June 2017, 21:28:18 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull sparc fixes from David Miller: 1) Fix TLB context wrap races, from Pavel Tatashin. 2) Cure some gcc-7 build issues. 3) Handle invalid setup_hugepagesz command line values properly, from Liam R Howlett. 4) Copy TSB using the correct address shift for the huge TSB, from Mike Kravetz. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: delete old wrap code sparc64: new context wrap sparc64: add per-cpu mm of secondary contexts sparc64: redefine first version sparc64: combine activate_mm and switch_mm sparc64: reset mm cpumask after wrap sparc/mm/hugepages: Fix setup_hugepagesz for invalid values. sparc: Machine description indices can vary sparc64: mm: fix copy_tsb to correctly copy huge page TSBs arch/sparc: support NR_CPUS = 4096 sparc64: Add __multi3 for gcc 7.x and later. sparc64: Fix build warnings with gcc 7. arch/sparc: increase CONFIG_NODES_SHIFT on SPARC64 to 5 06 June 2017, 21:28:18 UTC
abb2ea7 David Rientjes 06 June 2017, 20:36:24 UTC compiler, clang: suppress warning for unused static inline functions GCC explicitly does not warn for unused static inline functions for -Wunused-function. The manual states: Warn whenever a static function is declared but not defined or a non-inline static function is unused. Clang does warn for static inline functions that are unused. It turns out that suppressing the warnings avoids potentially complex #ifdef directives, which also reduces LOC. Suppress the warning for clang. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 June 2017, 21:09:22 UTC
b3aefc2 David S. Miller 06 June 2017, 20:45:48 UTC Merge branch 'sparc64-context-wrap-fixes' Pavel Tatashin says: ==================== sparc64: context wrap fixes This patch series contains fixes for context wrap: when we are out of context ids, and need to get a new version. It fixes memory corruption issues which happen when more than number of context ids (currently set to 8K) number of processes are started simultaneously, and processes can get a wrong context. sparc64: new context wrap: - contains explanation of new wrap method, and also explanation of races that it solves sparc64: reset mm cpumask after wrap - explains issue of not reseting cpu mask on a wrap ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 20:45:48 UTC
0197e41 Pavel Tatashin 31 May 2017, 15:25:25 UTC sparc64: delete old wrap code The old method that is using xcall and softint to get new context id is deleted, as it is replaced by a method of using per_cpu_secondary_mm without xcall to perform the context wrap. Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 20:45:29 UTC
a0582f2 Pavel Tatashin 31 May 2017, 15:25:24 UTC sparc64: new context wrap The current wrap implementation has a race issue: it is called outside of the ctx_alloc_lock, and also does not wait for all CPUs to complete the wrap. This means that a thread can get a new context with a new version and another thread might still be running with the same context. The problem is especially severe on CPUs with shared TLBs, like sun4v. I used the following test to very quickly reproduce the problem: - start over 8K processes (must be more than context IDs) - write and read values at a memory location in every process. Very quickly memory corruptions start happening, and what we read back does not equal what we wrote. Several approaches were explored before settling on this one: Approach 1: Move smp_new_mmu_context_version() inside ctx_alloc_lock, and wait for every process to complete the wrap. (Note: every CPU must WAIT before leaving smp_new_mmu_context_version_client() until every one arrives). This approach ends up with deadlocks, as some threads own locks which other threads are waiting for, and they never receive softint until these threads exit smp_new_mmu_context_version_client(). Since we do not allow the exit, deadlock happens. Approach 2: Handle wrap right during mondo interrupt. Use etrap/rtrap to enter into into C code, and issue new versions to every CPU. This approach adds some overhead to runtime: in switch_mm() we must add some checks to make sure that versions have not changed due to wrap while we were loading the new secondary context. (could be protected by PSTATE_IE but that degrades performance as on M7 and older CPUs as it takes 50 cycles for each access). Also, we still need a global per-cpu array of MMs to know where we need to load new contexts, otherwise we can change context to a thread that is going way (if we received mondo between switch_mm() and switch_to() time). Finally, there are some issues with window registers in rtrap() when context IDs are changed during CPU mondo time. The approach in this patch is the simplest and has almost no impact on runtime. We use the array with mm's where last secondary contexts were loaded onto CPUs and bump their versions to the new generation without changing context IDs. If a new process comes in to get a context ID, it will go through get_new_mmu_context() because of version mismatch. But the running processes do not need to be interrupted. And wrap is quicker as we do not need to xcall and wait for everyone to receive and complete wrap. Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 20:45:29 UTC
7a5b4bb Pavel Tatashin 31 May 2017, 15:25:23 UTC sparc64: add per-cpu mm of secondary contexts The new wrap is going to use information from this array to figure out mm's that currently have valid secondary contexts setup. Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 20:45:29 UTC
c441523 Pavel Tatashin 31 May 2017, 15:25:22 UTC sparc64: redefine first version CTX_FIRST_VERSION defines the first context version, but also it defines first context. This patch redefines it to only include the first context version. Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 20:45:28 UTC
14d0334 Pavel Tatashin 31 May 2017, 15:25:21 UTC sparc64: combine activate_mm and switch_mm The only difference between these two functions is that in activate_mm we unconditionally flush context. However, there is no need to keep this difference after fixing a bug where cpumask was not reset on a wrap. So, in this patch we combine these. Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 20:45:28 UTC
5889748 Pavel Tatashin 31 May 2017, 15:25:20 UTC sparc64: reset mm cpumask after wrap After a wrap (getting a new context version) a process must get a new context id, which means that we would need to flush the context id from the TLB before running for the first time with this ID on every CPU. But, we use mm_cpumask to determine if this process has been running on this CPU before, and this mask is not reset after a wrap. So, there are two possible fixes for this issue: 1. Clear mm cpumask whenever mm gets a new context id 2. Unconditionally flush context every time process is running on a CPU This patch implements the first solution Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 20:45:28 UTC
f322980 Liam R. Howlett 30 May 2017, 19:45:00 UTC sparc/mm/hugepages: Fix setup_hugepagesz for invalid values. hugetlb_bad_size needs to be called on invalid values. Also change the pr_warn to a pr_err to better align with other platforms. Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 20:45:03 UTC
c982aa9 James Clarke 29 May 2017, 19:17:56 UTC sparc: Machine description indices can vary VIO devices were being looked up by their index in the machine description node block, but this often varies over time as devices are added and removed. Instead, store the ID and look up using the type, config handle and ID. Signed-off-by: James Clarke <jrtc27@jrtc27.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112541 Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 20:45:03 UTC
654f480 Mike Kravetz 02 June 2017, 21:51:12 UTC sparc64: mm: fix copy_tsb to correctly copy huge page TSBs When a TSB grows beyond its current capacity, a new TSB is allocated and copy_tsb is called to copy entries from the old TSB to the new. A hash shift based on page size is used to calculate the index of an entry in the TSB. copy_tsb has hard coded PAGE_SHIFT in these calculations. However, for huge page TSBs the value REAL_HPAGE_SHIFT should be used. As a result, when copy_tsb is called for a huge page TSB the entries are placed at the incorrect index in the newly allocated TSB. When doing hardware table walk, the MMU does not match these entries and we end up in the TSB miss handling code. This code will then create and write an entry to the correct index in the TSB. We take a performance hit for the table walk miss and recreation of these entries. Pass a new parameter to copy_tsb that is the page size shift to be used when copying the TSB. Suggested-by: Anthony Yznaga <anthony.yznaga@oracle.com> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 20:45:02 UTC
c79a137 Jane Chu 06 June 2017, 20:32:29 UTC arch/sparc: support NR_CPUS = 4096 Linux SPARC64 limits NR_CPUS to 4064 because init_cpu_send_mondo_info() only allocates a single page for NR_CPUS mondo entries. Thus we cannot use all 4096 CPUs on some SPARC platforms. To fix, allocate (2^order) pages where order is set according to the size of cpu_list for possible cpus. Since cpu_list_pa and cpu_mondo_block_pa are not used in asm code, there are no imm13 offsets from the base PA that will break because they can only reach one page. Orabug: 25505750 Signed-off-by: Jane Chu <jane.chu@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Atish Patra <atish.patra@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 20:41:47 UTC
1d3028f Colin Ian King 06 June 2017, 13:10:49 UTC net: stmmac: fix a broken u32 less than zero check The check that queue is less or equal to zero is always true because queue is a u32; queue is decremented and will wrap around and never go -ve. Fix this by making queue an int. Detected by CoverityScan, CID#1428988 ("Unsigned compared against 0") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 20:26:28 UTC
426849e Niklas Cassel 06 June 2017, 07:25:00 UTC net: stmmac: fix completely hung TX when using TSO stmmac_tso_allocator can fail to set the Last Descriptor bit on a descriptor that actually was the last descriptor. This happens when the buffer of the last descriptor ends up having a size of exactly TSO_MAX_BUFF_SIZE. When the IP eventually reaches the next last descriptor, which actually has the bit set, the DMA will hang. When the DMA hangs, we get a tx timeout, however, since stmmac does not do a complete reset of the IP in stmmac_tx_timeout, we end up in a state with completely hung TX. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 20:24:09 UTC
d220b94 Max Filippov 06 June 2017, 01:31:16 UTC net: ethoc: enable NAPI before poll may be scheduled ethoc_reset enables device interrupts, ethoc_interrupt may schedule a NAPI poll before NAPI is enabled in the ethoc_open, which results in device being unable to send or receive anything until it's closed and reopened. In case the device is flooded with ingress packets it may be unable to recover at all. Move napi_enable above ethoc_reset in the ethoc_open to fix that. Fixes: a1702857724f ("net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 20:22:51 UTC
1020ce3 Nikolay Aleksandrov 05 June 2017, 22:26:24 UTC net: bridge: fix a null pointer dereference in br_afspec We might call br_afspec() with p == NULL which is a valid use case if the action is on the bridge device itself, but the bridge tunnel code dereferences the p pointer without checking, so check if p is null first. Reported-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Fixes: efa5356b0d97 ("bridge: per vlan dst_metadata netlink support") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 20:05:31 UTC
79514ef Eugeniu Rosca 05 June 2017, 22:08:10 UTC ravb: Fix use-after-free on `ifconfig eth0 down` Commit a47b70ea86bd ("ravb: unmap descriptors when freeing rings") has introduced the issue seen in [1] reproduced on H3ULCB board. Fix this by relocating the RX skb ringbuffer free operation, so that swiotlb page unmapping can be done first. Freeing of aligned TX buffers is not relevant to the issue seen in [1]. Still, reposition TX free calls as well, to have all kfree() operations performed consistently _after_ dma_unmap_*()/dma_free_*(). [1] Console screenshot with the problem reproduced: salvator-x login: root root@salvator-x:~# ifconfig eth0 up Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: \ attached PHY driver [Micrel KSZ9031 Gigabit PHY] \ (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=235) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready root@salvator-x:~# root@salvator-x:~# ifconfig eth0 down ================================================================== BUG: KASAN: use-after-free in swiotlb_tbl_unmap_single+0xc4/0x35c Write of size 1538 at addr ffff8006d884f780 by task ifconfig/1649 CPU: 0 PID: 1649 Comm: ifconfig Not tainted 4.12.0-rc4-00004-g112eb07287d1 #32 Hardware name: Renesas H3ULCB board based on r8a7795 (DT) Call trace: [<ffff20000808f11c>] dump_backtrace+0x0/0x3a4 [<ffff20000808f4d4>] show_stack+0x14/0x1c [<ffff20000865970c>] dump_stack+0xf8/0x150 [<ffff20000831f8b0>] print_address_description+0x7c/0x330 [<ffff200008320010>] kasan_report+0x2e0/0x2f4 [<ffff20000831eac0>] check_memory_region+0x20/0x14c [<ffff20000831f054>] memcpy+0x48/0x68 [<ffff20000869ed50>] swiotlb_tbl_unmap_single+0xc4/0x35c [<ffff20000869fcf4>] unmap_single+0x90/0xa4 [<ffff20000869fd14>] swiotlb_unmap_page+0xc/0x14 [<ffff2000080a2974>] __swiotlb_unmap_page+0xcc/0xe4 [<ffff2000088acdb8>] ravb_ring_free+0x514/0x870 [<ffff2000088b25dc>] ravb_close+0x288/0x36c [<ffff200008aaf8c4>] __dev_close_many+0x14c/0x174 [<ffff200008aaf9b4>] __dev_close+0xc8/0x144 [<ffff200008ac2100>] __dev_change_flags+0xd8/0x194 [<ffff200008ac221c>] dev_change_flags+0x60/0xb0 [<ffff200008ba2dec>] devinet_ioctl+0x484/0x9d4 [<ffff200008ba7b78>] inet_ioctl+0x190/0x194 [<ffff200008a78c44>] sock_do_ioctl+0x78/0xa8 [<ffff200008a7a128>] sock_ioctl+0x110/0x3c4 [<ffff200008365a70>] vfs_ioctl+0x90/0xa0 [<ffff200008365dbc>] do_vfs_ioctl+0x148/0xc38 [<ffff2000083668f0>] SyS_ioctl+0x44/0x74 [<ffff200008083770>] el0_svc_naked+0x24/0x28 The buggy address belongs to the page: page:ffff7e001b6213c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffff7e001b6213e0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8006d884f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff8006d884f780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8006d884f800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint root@salvator-x:~# Fixes: a47b70ea86bd ("ravb: unmap descriptors when freeing rings") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 20:02:22 UTC
e3ebdb2 Richard Haines 05 June 2017, 15:44:40 UTC net/ipv6: Fix CALIPSO causing GPF with datagram support When using CALIPSO with IPPROTO_UDP it is possible to trigger a GPF as the IP header may have moved. Also update the payload length after adding the CALIPSO option. Signed-off-by: Richard Haines <richard_c_haines@btinternet.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 19:18:20 UTC
5942381 Colin Ian King 05 June 2017, 09:04:52 UTC net: stmmac: ensure jumbo_frm error return is correctly checked for -ve value The current comparison of entry < 0 will never be true since entry is an unsigned integer. Make entry an int to ensure -ve error return values from the call to jumbo_frm are correctly being caught. Detected by CoverityScan, CID#1238760 ("Macro compares unsigned to 0") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 19:13:46 UTC
7b868fe David S. Miller 06 June 2017, 16:53:20 UTC Merge tag 'wireless-drivers-for-davem-2017-06-06' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.12 It has been a slow start of cycle and this the first set of fixes for 4.12. Nothing really major here. wcn36xx * fix an issue with module reload brcmfmac * fix aligment regression on 64 bit systems iwlwifi * fixes for memory leaks, runtime PM, memory initialisation and other smaller problems * fix IBSS on devices using DQA mode (7260 and up) * fix the minimum firmware API requirement for 7265D, 3168, 8000 and 8265 ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 16:53:20 UTC
84c6c30 Linus Torvalds 06 June 2017, 16:37:44 UTC Merge tag 'media/v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Some bug fixes: - Don't fail build if atomisp has warnings - Some CEC Kconfig changes to allow it to be used by DRM without media dependencies - A race fix at RC initialization code - A driver fix at rainshadow-cec IMHO, the one that affects most people in this series is a build fix: if you try to build the Kernel with W=1 or using gcc7 and all[yes|mod]config, build will fail due to -Werror at atomisp makefiles" * tag 'media/v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] rc-core: race condition during ir_raw_event_register() [media] cec: drop MEDIA_CEC_DEBUG [media] cec: rename MEDIA_CEC_NOTIFIER to CEC_NOTIFIER [media] cec: select CEC_CORE instead of depend on it [media] rainshadow-cec: ensure exit_loop is intialized [media] atomisp: don't treat warnings as errors 06 June 2017, 16:37:44 UTC
80971df David S. Miller 06 June 2017, 16:12:57 UTC Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2017-06-06 This series contains fixes to i40e and i40evf only. Mauro S. M. Rodrigues fixes a flood in the kernel log which was introduced in a previous commit because of a mistaken substitution of __I40E_VSI_DOWN instead of __I40E_DOWN when testing the state of the PF. Björn Töpel fixes an issue introduced in a previous commit where the offset was incorrect and could lead to data corruption for architectures using PAGE_SIZE larger than 8191. Fixed the issue by updating the page_offset correctly using the proper setting for truesize. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 16:12:57 UTC
f4eb17e David S. Miller 06 June 2017, 15:34:06 UTC Revert "sit: reload iphdr in ipip6_rcv" This reverts commit b699d0035836f6712917a41e7ae58d84359b8ff9. As per Eric Dumazet, the pskb_may_pull() is a NOP in this particular case, so the 'iph' reload is unnecessary. Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2017, 15:34:06 UTC
2aae918 Björn Töpel 15 May 2017, 04:52:00 UTC i40e/i40evf: proper update of the page_offset field In f8b45b74cc62 ("i40e/i40evf: Use build_skb to build frames") i40e_build_skb updates the page_offset field with an incorrect offset, which can lead to data corruption. This patch updates page_offset correctly, by properly setting truesize. Note that the bug only appears on architectures where PAGE_SIZE is 8192 or larger. Fixes: f8b45b74cc62 ("i40e/i40evf: Use build_skb to build frames") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 06 June 2017, 09:49:15 UTC
9e6c9c0 Mauro S. M. Rodrigues 13 May 2017, 02:26:56 UTC i40e: Fix state flags for bit set and clean operations of PF Commit 0da36b9774cc ("i40e: use DECLARE_BITMAP for state fields") introduced changes in the way i40e works with state flags converting them to bitmaps using kernel bitmap API. This change introduced a regression due to a mistaken substitution using __I40E_VSI_DOWN instead of __I40E_DOWN when testing state of a PF at i40e_reset_subtask() function. This caused a flood in the kernel log with the follow message: [49.013] i40e 0002:01:00.0: bad reset request 0x00000020 Commit d19cb64b9222 ("i40e: separate PF and VSI state flags") also introduced some misuse of the VSI and PF flags, so both could be considered as the offenders. This patch simply fixes the flags where it makes sense by changing __I40E_VSI_DOWN to __I40E_DOWN. Fixes: 0da36b9774cc ("i40e: use DECLARE_BITMAP for state fields") Fixes: d19cb64b9222 ("i40e: separate PF and VSI state flags") Reviewed-by: "Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 06 June 2017, 09:45:32 UTC
ba7b238 Linus Torvalds 05 June 2017, 22:37:03 UTC Merge branch 'for-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "Two cgroup fixes. One to address RCU delay of cpuset removal affecting userland visible behaviors. The other fixes a race condition between controller disable and cgroup removal" * 'for-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: consider dying css as offline cgroup: Prevent kill_css() from being called more than once 05 June 2017, 22:37:03 UTC
e543c8a Linus Torvalds 05 June 2017, 22:31:14 UTC Merge branch 'for-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: - Revert of sata_mv devm_ioremap_resource() conversion. It made init fail if there are overlapping resources which led to detection failures on some setups. - A workaround for an Acer laptop which sometimes reports corrupt port map. - Other non-critical fixes. * 'for-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: fix error checking in in ata_parse_force_one() Revert "ata: sata_mv: Convert to devm_ioremap_resource()" ata: libahci: properly propagate return value of platform_get_irq() ata: sata_rcar: Handle return value of clk_prepare_enable ahci: Acer SA5-271 SSD Not Detected Fix 05 June 2017, 22:31:14 UTC
dc89481 Kalle Valo 05 June 2017, 19:21:25 UTC Merge tag 'iwlwifi-for-kalle-2017-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes Fixes for 4.12: * Some memory leaks; * IBSS support; * Some bugzilla bugs; * Some runtime PM fixes; * Rate-scaling issues; * Some locking problems; 05 June 2017, 19:21:25 UTC
dc1cd1d Shahar S Matityahu 06 April 2017, 10:35:38 UTC iwlwifi: fix host command memory leaks Sending host command with CMD_WANT_SKB flag demands the release of the response buffer with iwl_free_resp function. The patch adds the memory release in all the relevant places Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> 05 June 2017, 18:47:10 UTC
1509880 Luca Coelho 25 April 2017, 07:18:10 UTC iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265 In a previous commit, we removed support for API versions earlier than 22 for these NICs. By mistake, the *_UCODE_API_MIN definitions were set to 17. Fix that. Fixes: 4b87e5af638b ("iwlwifi: remove support for fw older than -17 and -22") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> 05 June 2017, 18:47:10 UTC
40cbeca Johannes Berg 31 March 2017, 08:47:35 UTC iwlwifi: mvm: clear new beacon command template struct Clear the struct so that all reserved fields are zero when we send the struct down to the device. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> 05 June 2017, 18:47:09 UTC
71793b7 Luca Coelho 30 March 2017, 09:04:47 UTC iwlwifi: mvm: don't fail when removing a key from an inexisting sta The iwl_mvm_remove_sta_key() function handles removing a key when the sta doesn't exist anymore. Mistakenly, this was changed to return an error while fixing another bug. If the mvm_sta doesn't exist, we continue normally, but just don't try to remove the igtk key. Fixes: cd4d23c1ea9b ("iwlwifi: mvm: Fix removal of IGTK") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> 05 June 2017, 18:47:09 UTC
e4c49c4 Luca Coelho 24 March 2017, 09:01:45 UTC iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3 We only need to handle d0i3 entry and exit during suspend resume if system_pm is set to IWL_PLAT_PM_MODE_D0I3, otherwise d0i3 entry failures will cause suspend to fail. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=194791 Signed-off-by: Luca Coelho <luciano.coelho@intel.com> 05 June 2017, 18:47:08 UTC
addce85 Emmanuel Grumbach 29 March 2017, 07:21:09 UTC iwlwifi: mvm: fix firmware debug restart recording When we want to stop the recording of the firmware debug and restart it later without reloading the firmware we don't need to resend the configuration that comes with host commands. Sending those commands confused the hardware and led to an NMI 0x66. Change the flow as following: * read the relevant registers (DBGC_IN_SAMPLE, DBGC_OUT_CTRL) * clear those registers * wait for the hardware to complete its write to the buffer * get the data * restore the value of those registers (to restart the recording) For early start (where the configuration is already compiled in the firmware), we don't need to set those registers after the firmware has been loaded, but only when we want to restart the recording without having restarted the firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> 05 June 2017, 18:47:08 UTC
d995440 Johannes Berg 22 March 2017, 21:00:10 UTC iwlwifi: tt: move ucode_loaded check under mutex The ucode_loaded check should be under the mutex, since it can otherwise change state after we looked at it and before we got the mutex. Fix that. Fixes: 5c89e7bc557e ("iwlwifi: mvm: add registration to cooling device") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> 05 June 2017, 18:47:07 UTC
ee48b72 Liad Kaufman 21 March 2017, 15:13:16 UTC iwlwifi: mvm: support ibss in dqa mode Allow working IBSS also when working in DQA mode. This is done by setting it to treat the queues the same as a BSS AP treats the queues. Fixes: 7948b87308a4 ("iwlwifi: mvm: enable dynamic queue allocation mode") Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> 05 June 2017, 18:47:06 UTC
c72c37b Haim Dreyfuss 16 March 2017, 15:26:03 UTC iwlwifi: mvm: Fix command queue number on d0i3 flow During d0i3 flow we flush all the queue except from the command queue. Currently, in this flow the command queue is hard coded to 9. In DQA the command queue number has changed from 9 to 0. Fix that. This fixes a problem in runtime PM resume flow. Fixes: 097129c9e625 ("iwlwifi: mvm: move cmd queue to be #0 in dqa mode") Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> 05 June 2017, 18:46:10 UTC
ea42d1c Gregory Greenman 06 March 2017, 09:15:41 UTC iwlwifi: mvm: rs: start using LQ command color Up until now, the driver was comparing the rate reported by the FW and the rate of the latest LQ command to avoid processing data belonging to the old LQ command. Recently, FW changed the meaning of the initial rate field in tx response and it holds the actual rate (which is not necessarily the initial rate of LQ's rate table). Use instead LQ cmd color to be able to filter out tx responses/BA notifications which where sent during earlier LQ commands' time frame. This fixes some throughput degradation in noisy environments. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> 05 June 2017, 18:45:41 UTC
1b4af13 David S. Miller 05 June 2017, 18:28:57 UTC sparc64: Add __multi3 for gcc 7.x and later. Reported-by: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2017, 18:30:33 UTC
112eb07 Linus Torvalds 05 June 2017, 18:19:40 UTC Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: "Three fixes this time around: - Two fixes for noMMU, fixing the decompressor header layout, and preventing a build error with some configurations. - Fixing the hyp-stub updates that went in during the merge window for platforms that use MCPM" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8677/1: boot/compressed: fix decompressor header layout for v7-M ARM: 8676/1: NOMMU: provide pgprot_device() macro ARM: 8675/1: MCPM: ensure not to enter __hyp_soft_restart from loopback and cpu_power_down 05 June 2017, 18:19:40 UTC
269f988 Ido Shamay 05 June 2017, 07:44:56 UTC net/mlx4: Check if Granular QoS per VF has been enabled before updating QP qos_vport The Granular QoS per VF feature must be enabled in FW before it can be used. Thus, the driver cannot modify a QP's qos_vport value (via the UPDATE_QP FW command) if the feature has not been enabled -- the FW returns an error if this is attempted. Fixes: 08068cd5683f ("net/mlx4: Added qos_vport QP configuration in VST mode") Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2017, 15:29:54 UTC
6c6ab3e Randy Dunlap 05 June 2017, 02:46:53 UTC net: phy: fix kernel-doc warnings Fix kernel-doc warnings (typo) in drivers/net/phy/phy.c: ..//drivers/net/phy/phy.c:259: warning: No description found for parameter 'features' ..//drivers/net/phy/phy.c:259: warning: Excess function parameter 'feature' description in 'phy_lookup_setting' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2017, 15:28:50 UTC
6044bd4 Haishuang Yan 05 June 2017, 00:57:21 UTC devlink: fix potential memort leak We must free allocated skb when genlmsg_put() return fails. Fixes: 1555d204e743 ("devlink: Support for pipeline debug (dpipe)") Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2017, 15:24:28 UTC
1e0ce2a Anmol Sarma 03 June 2017, 12:10:54 UTC net: Update TCP congestion control documentation Update tcp.txt to fix mandatory congestion control ops and default CCA selection. Also, fix comment in tcp.h for undo_cwnd. Signed-off-by: Anmol Sarma <me@anmolsarma.in> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2017, 14:53:24 UTC
06a4b6d Ard Biesheuvel 24 May 2017, 14:31:57 UTC ARM: 8677/1: boot/compressed: fix decompressor header layout for v7-M As reported by Patrice, the header layout of the decompressor is incorrect when building for v7-M. In this case, the __nop macro resolves to 'mov r0, r0', which is emitted as a narrow encoding, resulting in the header data fields to end up at lower offsets than required. Given the variety of targets we need to support with the same code, the startup sequence is a bit of a jumble, and uses instructions and macros whose encoding widths cannot be specified (badr), or only exist in a narrow encoding (bx) So force the use of a wide encoding in __nop, and replace the start sequence with a simple jump to the label marking the start of code, preceded by a Thumb2 mode switch if required (using explicit wide encodings where appropriate). The label itself can be moved to the start of code [where it belongs] due to the larger range of branch instructions as compared to adr instructions. Reported-by: Patrice CHOTARD <patrice.chotard@st.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> 05 June 2017, 09:29:40 UTC
7ef4783 Vladimir Murzin 24 May 2017, 09:30:18 UTC ARM: 8676/1: NOMMU: provide pgprot_device() macro NOMMU build leads to the following error: CC drivers/pci/mmap.o drivers/pci/mmap.c: In function 'pci_mmap_resource_range': drivers/pci/mmap.c:60:3: error: implicit declaration of function 'pgprot_device' [-Werror=implicit-function-declaration] vma->vm_page_prot = pgprot_device(vma->vm_page_prot); ^ cc1: some warnings being treated as errors scripts/Makefile.build:302: recipe for target 'drivers/pci/mmap.o' failed make[2]: *** [drivers/pci/mmap.o] Error 1 scripts/Makefile.build:561: recipe for target 'drivers/pci' failed make[1]: *** [drivers/pci] Error 2 Makefile:1016: recipe for target 'drivers' failed make: *** [drivers] Error 2 Fix it with support of pgprot_device() macro for NOMMU. Fixes: 00d2904ffeac ("ARM/PCI: Use generic pci_mmap_resource_range()") Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> 05 June 2017, 09:29:40 UTC
6dc06c0 Talat Batheesh 04 June 2017, 11:30:07 UTC net/mlx4: Fix the check in attaching steering rules Our previous patch (cited below) introduced a regression for RAW Eth QPs. Fix it by checking if the QP number provided by user-space exists, hence allowing steering rules to be added for valid QPs only. Fixes: 89c557687a32 ("net/mlx4_en: Avoid adding steering rules with invalid ring") Reported-by: Or Gerlitz <gerlitz.or@gmail.com> Signed-off-by: Talat Batheesh <talatb@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2017, 03:10:05 UTC
b699d00 Haishuang Yan 04 June 2017, 06:43:43 UTC sit: reload iphdr in ipip6_rcv Since iptunnel_pull_header() can call pskb_may_pull(), we must reload any pointer that was related to skb->head. Fixes: a09a4c8dd1ec ("tunnels: Remove encapsulation offloads on decap") Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2017, 03:04:31 UTC
77d4b1d Eric Dumazet 03 June 2017, 16:29:25 UTC net: ping: do not abuse udp_poll() Alexander reported various KASAN messages triggered in recent kernels The problem is that ping sockets should not use udp_poll() in the first place, and recent changes in UDP stack finally exposed this old bug. Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Fixes: 6d0bfe226116 ("net: ipv6: Add IPv6 support to the ping socket.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Sasha Levin <alexander.levin@verizon.com> Cc: Solar Designer <solar@openwall.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Lorenzo Colitti <lorenzo@google.com> Acked-By: Lorenzo Colitti <lorenzo@google.com> Tested-By: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2017, 02:56:55 UTC
b07ac98 Florian Fainelli 03 June 2017, 05:05:23 UTC net: dsa: Fix stale cpu_switch reference after unbind then bind Commit 9520ed8fb841 ("net: dsa: use cpu_switch instead of ds[0]") replaced the use of dst->ds[0] with dst->cpu_switch since that is functionally equivalent, however, we can now run into an use after free scenario after unbinding then rebinding the switch driver. The use after free happens because we do correctly initialize dst->cpu_switch the first time we probe in dsa_cpu_parse(), then we unbind the driver: dsa_dst_unapply() is called, and we rebind again. dst->cpu_switch now points to a freed "ds" structure, and so when we finally dereference it in dsa_cpu_port_ethtool_setup(), we oops. To fix this, simply set dst->cpu_switch to NULL in dsa_dst_unapply() which guarantees that we always correctly re-assign dst->cpu_switch in dsa_cpu_parse(). Fixes: 9520ed8fb841 ("net: dsa: use cpu_switch instead of ds[0]") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2017, 02:55:17 UTC
e3e86b5 David S. Miller 05 June 2017, 01:41:10 UTC ipv6: Fix leak in ipv6_gso_segment(). If ip6_find_1stfragopt() fails and we return an error we have to free up 'segs' because nobody else is going to. Fixes: 2423496af35d ("ipv6: Prevent overrun when parsing v6 header options") Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2017, 01:41:10 UTC
9a1c44d Eric Garver 02 June 2017, 18:54:10 UTC geneve: fix needed_headroom and max_mtu for collect_metadata Since commit 9b4437a5b870 ("geneve: Unify LWT and netdev handling.") when using COLLECT_METADATA geneve devices are created with too small of a needed_headroom and too large of a max_mtu. This is because ip_tunnel_info_af() is not valid with the device level info when using COLLECT_METADATA and we mistakenly fall into the IPv4 case. For COLLECT_METADATA, always use the worst case of ipv6 since both sockets are created. Fixes: 9b4437a5b870 ("geneve: Unify LWT and netdev handling.") Signed-off-by: Eric Garver <e@erig.me> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2017, 00:03:09 UTC
38b2579 Soheil Hassas Yeganeh 02 June 2017, 16:38:22 UTC sock: reset sk_err when the error queue is empty Prior to f5f99309fa74 (sock: do not set sk_err in sock_dequeue_err_skb), sk_err was reset to the error of the skb on the head of the error queue. Applications, most notably ping, are relying on this behavior to reset sk_err for ICMP packets. Set sk_err to the ICMP error when there is an ICMP packet at the head of the error queue. Fixes: f5f99309fa74 (sock: do not set sk_err in sock_dequeue_err_skb) Reported-by: Cyril Hrubis <chrubis@suse.cz> Tested-by: Cyril Hrubis <chrubis@suse.cz> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2017, 00:01:53 UTC
a7c0b8b Michal Hocko 02 June 2017, 15:54:08 UTC amd-xgbe: use PAGE_ALLOC_COSTLY_ORDER in xgbe_map_rx_buffer xgbe_map_rx_buffer is rather confused about what PAGE_ALLOC_COSTLY_ORDER means. It uses PAGE_ALLOC_COSTLY_ORDER-1 assuming that PAGE_ALLOC_COSTLY_ORDER is the first costly order which is not the case actually because orders larger than that are costly. And even that applies only to sleeping allocations which is not the case here. We simply do not perform any costly operations like reclaim or compaction for those. Simplify the code by dropping the order calculation and use PAGE_ALLOC_COSTLY_ORDER directly. Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2017, 00:01:00 UTC
5f733ee Liam McBirnie 01 June 2017, 05:36:01 UTC ip6_tunnel: fix traffic class routing for tunnels ip6_route_output() requires that the flowlabel contains the traffic class for policy routing. Commit 0e9a709560db ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets") removed the code which previously added the traffic class to the flowlabel. The traffic class is added here because only route lookup needs the flowlabel to contain the traffic class. Fixes: 0e9a709560db ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets") Signed-off-by: Liam McBirnie <liam.mcbirnie@boeing.com> Acked-by: Peter Dawson <peter.a.dawson@boeing.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 June 2017, 23:49:33 UTC
3c2993b Linus Torvalds 04 June 2017, 23:47:43 UTC Linux 4.12-rc4 04 June 2017, 23:47:43 UTC
239e250 Richard Narron 04 June 2017, 23:23:18 UTC fs/ufs: Set UFS default maximum bytes per file This fixes a problem with reading files larger than 2GB from a UFS-2 file system: https://bugzilla.kernel.org/show_bug.cgi?id=195721 The incorrect UFS s_maxsize limit became a problem as of commit c2a9737f45e2 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") which started using s_maxbytes to avoid a page index overflow in do_generic_file_read(). That caused files to be truncated on UFS-2 file systems because the default maximum file size is 2GB (MAX_NON_LFS) and UFS didn't update it. Here I simply increase the default to a common value used by other file systems. Signed-off-by: Richard Narron <comet.berkeley@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will B <will.brokenbourgh2877@gmail.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <stable@vger.kernel.org> # v4.9 and backports of c2a9737f45e2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 June 2017, 23:33:54 UTC
2460966 Timur Tabi 01 June 2017, 21:08:13 UTC net: qcom/emac: do not use hardware mdio automatic polling Use software polling (PHY_POLL) to check for link state changes instead of relying on the EMAC's hardware polling feature. Some PHY drivers are unable to get a functioning link because the HW polling is not robust enough. The EMAC is able to poll the PHY on the MDIO bus looking for link state changes (via the Link Status bit in the Status Register at address 0x1). When the link state changes, the EMAC triggers an interrupt and tells the driver what the new state is. The feature eliminates the need for software to poll the MDIO bus. Unfortunately, this feature is incompatible with phylib, because it ignores everything that the PHY core and PHY drivers are trying to do. In particular: 1. It assumes a compatible register set, so PHYs with different registers may not work. 2. It doesn't allow for hardware errata that have work-arounds implemented in the PHY driver. 3. It doesn't support multiple register pages. If the PHY core switches the register set to another page, the EMAC won't know the page has changed and will still attempt to read the same PHY register. 4. It only checks the copper side of the link, not the SGMII side. Some PHY drivers (e.g. at803x) may also check the SGMII side, and report the link as not ready during autonegotiation if the SGMII link is still down. Phylib then waits for another interrupt to query the PHY again, but the EMAC won't send another interrupt because it thinks the link is up. Cc: stable@vger.kernel.org # 4.11.x Tested-by: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net> 04 June 2017, 23:32:09 UTC
125f42b Linus Torvalds 04 June 2017, 18:56:53 UTC Merge tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client bugfixes from Trond Myklebust: "Bugfixes include: - Fix a typo in commit e092693443b ("NFS append COMMIT after synchronous COPY") that breaks copy offload - Fix the connect error propagation in xs_tcp_setup_socket() - Fix a lock leak in nfs40_walk_client_list - Verify that pNFS requests lie within the offset range of the layout segment" * tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs: Mark unnecessarily extern functions as static SUNRPC: ensure correct error is reported by xs_tcp_setup_socket() NFSv4.0: Fix a lock leak in nfs40_walk_client_list pnfs: Fix the check for requests in range of layout segment xprtrdma: Delete an error message for a failed memory allocation in xprt_rdma_bc_setup() pNFS/flexfiles: missing error code in ff_layout_alloc_lseg() NFS fix COMMIT after COPY 04 June 2017, 18:56:53 UTC
3c06e6c Linus Torvalds 04 June 2017, 18:41:41 UTC Merge tag 'tty-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty fix from Greg KH: "Here is a single tty core fix for 4.12-rc4. It reverts a patch that a lot of people reported as causing lockdep and other warnings. Right after I reverted this in my tree, it seems like another "correct" fix might have shown up, but it's too late in the release cycle to be messing with tty core locking, so let's just revert this for now to go back how things always have been and try it again for 4.13. This has not been in linux-next as I only reverted it a few hours ago" * tag 'tty-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: fix port buffer locking" 04 June 2017, 18:41:41 UTC
e00811b Linus Torvalds 04 June 2017, 18:37:42 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: - a couple of regression fixes in synaptics and axp20x-pek drivers - try to ease transition from PS/2 to RMI for Synaptics touchpad users by ensuring we do not try to activate RMI mode when RMI SMBus support is not enabled, and nag users a bit to enable it - plus a couple of other changes that seemed worthwhile for this release * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: axp20x-pek - switch to acpi_dev_present and check for ACPI0011 too Input: axp20x-pek - only check for "INTCFD9" ACPI device on Cherry Trail Input: tm2-touchkey - use LEN_ON as boolean value instead of LED_FULL Input: synaptics - tell users to report when they should be using rmi-smbus Input: synaptics - warn the users when there is a better mode Input: synaptics - keep PS/2 around when RMI4_SMB is not enabled Input: synaptics - clear device info before filling in Input: silead - disable interrupt during suspend 04 June 2017, 18:37:42 UTC
9f03b2c Linus Torvalds 04 June 2017, 18:29:32 UTC Merge tag 'rtc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixlet from Alexandre Belloni: "A single patch, not really a fix but I don't think there is any reason to delay it. Change the mailing list address" * tag 'rtc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: MAINTAINERS: update RTC mailing list 04 June 2017, 18:29:32 UTC
963761a Sean Young 24 May 2017, 09:24:51 UTC [media] rc-core: race condition during ir_raw_event_register() A rc device can call ir_raw_event_handle() after rc_allocate_device(), but before rc_register_device() has completed. This is racey because rcdev->raw is set before rcdev->raw->thread has a valid value. Cc: stable@kernel.org Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> 04 June 2017, 18:25:38 UTC
20249f8 Hans Verkuil 28 May 2017, 08:52:16 UTC [media] cec: drop MEDIA_CEC_DEBUG Just depend on DEBUG_FS, no need to invent a new kernel config. Especially since CEC can be enabled by drm without enabling MEDIA_SUPPORT. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> 04 June 2017, 18:23:36 UTC
e94c328 Hans Verkuil 28 May 2017, 08:58:04 UTC [media] cec: rename MEDIA_CEC_NOTIFIER to CEC_NOTIFIER This config option is strictly speaking independent of the media subsystem since it can be used by drm as well. Besides, it looks odd when drivers select CEC_CORE and MEDIA_CEC_NOTIFIER, that's inconsistent naming. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> 04 June 2017, 18:23:35 UTC
9177e51 Hans Verkuil 28 May 2017, 08:48:37 UTC [media] cec: select CEC_CORE instead of depend on it The CEC framework is used by both drm and media. That makes it tricky to get the dependencies right. This patch moves the CEC_CORE and MEDIA_CEC_NOTIFIER config options out of the media menu and instead drivers that want to use CEC should select CEC_CORE and MEDIA_CEC_NOTIFIER (if needed). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> 04 June 2017, 18:23:33 UTC
ca33784 Colin Ian King 19 May 2017, 17:45:15 UTC [media] rainshadow-cec: ensure exit_loop is intialized exit_loop is not being initialized, so it contains garbage. Ensure it is initialized to false. Detected by CoverityScan, CID#1436409 ("Uninitialized scalar variable") Fixes: ea6a69defd3311 ("[media] rainshadow-cec: avoid -Wmaybe-uninitialized warning") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> 04 June 2017, 18:23:32 UTC
f224c57 Mauro Carvalho Chehab 18 May 2017, 08:40:18 UTC [media] atomisp: don't treat warnings as errors Several atomisp files use: ccflags-y += -Werror As, on media, our usual procedure is to use W=1, and atomisp has *a lot* of warnings with such flag enabled,like: ./drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/system_local.h:62:26: warning: 'DDR_BASE' defined but not used [-Wunused-const-variable=] At the end, it causes our build to fail, impacting our workflow. So, remove this crap. If one wants to force -Werror, he can still build with it enabled by passing a parameter to make. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> 04 June 2017, 18:23:32 UTC
1f915b7 Linus Torvalds 04 June 2017, 18:15:43 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is nine fixes, seven of which are for the qedi driver (new as of 4.10) the other two are a use after free in the cxgbi drivers and a potential NULL dereference in the rdac device handler" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libcxgbi: fix skb use after free scsi: qedi: Fix endpoint NULL panic during recovery. scsi: qedi: set max_fin_rt default value scsi: qedi: Set firmware tcp msl timer value. scsi: qedi: Fix endpoint NULL panic in qedi_set_path. scsi: qedi: Set dma_boundary to 0xfff. scsi: qedi: Correctly set firmware max supported BDs. scsi: qedi: Fix bad pte call trace when iscsiuio is stopped. scsi: scsi_dh_rdac: Use ctlr directly in rdac_failover_get() 04 June 2017, 18:15:43 UTC
55cbdaf Linus Torvalds 04 June 2017, 17:41:32 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "For the most part this is just a minor -rc cycle for the rdma subsystem. Even given that this is all of the -rc patches since the merge window closed, it's still only about 25 patches: - Multiple i40iw, nes, iw_cxgb4, hfi1, qib, mlx4, mlx5 fixes - A few upper layer protocol fixes (IPoIB, iSER, SRP) - A modest number of core fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (26 commits) RDMA/SA: Fix kernel panic in CMA request handler flow RDMA/umem: Fix missing mmap_sem in get umem ODP call RDMA/core: not to set page dirty bit if it's already set. RDMA/uverbs: Declare local function static and add brackets to sizeof RDMA/netlink: Reduce exposure of RDMA netlink functions RDMA/srp: Fix NULL deref at srp_destroy_qp() RDMA/IPoIB: Limit the ipoib_dev_uninit_default scope RDMA/IPoIB: Replace netdev_priv with ipoib_priv for ipoib_get_link_ksettings RDMA/qedr: add null check before pointer dereference RDMA/mlx5: set UMR wqe fence according to HCA cap net/mlx5: Define interface bits for fencing UMR wqe RDMA/mlx4: Fix MAD tunneling when SRIOV is enabled RDMA/qib,hfi1: Fix MR reference count leak on write with immediate RDMA/hfi1: Defer setting VL15 credits to link-up interrupt RDMA/hfi1: change PCI bar addr assignments to Linux API functions RDMA/hfi1: fix array termination by appending NULL to attr array RDMA/iw_cxgb4: fix the calculation of ipv6 header size RDMA/iw_cxgb4: calculate t4_eq_status_entries properly RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers RDMA/nes: ACK MPA Reply frame ... 04 June 2017, 17:41:32 UTC
fc098af Greg Kroah-Hartman 04 June 2017, 08:23:25 UTC Revert "tty: fix port buffer locking" This reverts commit 925bb1ce47f429f69aad35876df7ecd8c53deb7e. It causes lots of warnings and problems so for now, let's just revert it. Reported-by: <valdis.kletnieks@vt.edu> Reported-by: Russell King <linux@armlinux.org.uk> Reported-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 04 June 2017, 08:23:25 UTC
4f253e1 Jan Kara 16 May 2017, 10:18:11 UTC nfs: Mark unnecessarily extern functions as static nfs_initialise_sb() and nfs_clone_super() are declared as extern even though they are used only in fs/nfs/super.c. Mark them as static. Also remove explicit 'inline' directive from nfs_initialise_sb() and leave it upto compiler to decide whether inlining is worth it. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> 03 June 2017, 20:06:38 UTC
ea094f3 Linus Torvalds 03 June 2017, 15:45:03 UTC Merge tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "A couple of patches for the aspeed pwm fan driver" * tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (aspeed-pwm-tacho) make fan/pwm names start with index 1 hwmon: (aspeed-pwm-tacho) Call of_node_put() on a node not claimed hwmon: (aspeed-pwm-tacho) On read failure return -ETIMEDOUT hwmon: (aspeed-pwm-tacho) Select REGMAP 03 June 2017, 15:45:03 UTC
cc54874 Linus Torvalds 03 June 2017, 15:42:30 UTC Merge tag 'for-linus-20170602' of git://git.infradead.org/linux-mtd Pull MTD fixes from Brian Norris: "NAND updates from Boris: tango fixes: - Add missing MODULE_DEVICE_TABLE() in tango_nand.c - Update the number of corrected bitflips core fixes: - Fix a long standing memory leak in nand_scan_tail() - Fix several bugs introduced by the per-vendor init/detection infrastructure (introduced in 4.12) - Add a static specifier to nand_ooblayout_lp_hamming_ops definition" * tag 'for-linus-20170602' of git://git.infradead.org/linux-mtd: mtd: nand: make nand_ooblayout_lp_hamming_ops static mtd: nand: tango: Update ecc_stats.corrected mtd: nand: tango: Export OF device ID table as module aliases mtd: nand: samsung: warn about un-parseable ECC info mtd: nand: free vendor-specific resources in init failure paths mtd: nand: drop unneeded module.h include mtd: nand: don't leak buffers when ->scan_bbt() fails 03 June 2017, 15:42:30 UTC
5f348fa Stefan Schaeckeler 02 June 2017, 19:43:28 UTC hwmon: (aspeed-pwm-tacho) make fan/pwm names start with index 1 Make fan and pwm names in sysfs start with index 1 in accordance to Documentation/hwmon/sysfs-interface conventions. Current implementation starts with index 0, making tools such as sensors(1) skip the first fan. Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com> Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: Guenter Roeck <linux@roeck-us.net> 03 June 2017, 10:55:43 UTC
4d58e73 Stefan Schaeckeler 02 June 2017, 19:42:08 UTC hwmon: (aspeed-pwm-tacho) Call of_node_put() on a node not claimed Call of_node_put() on a node claimed with of_node_get() or by any other means such as for_each_child_of_node(). Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com> Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: Guenter Roeck <linux@roeck-us.net> 03 June 2017, 10:54:00 UTC
0fd5f22 Hans de Goede 03 June 2017, 00:50:22 UTC Input: axp20x-pek - switch to acpi_dev_present and check for ACPI0011 too acpi_dev_found checks that there is a matching ACPI node, but it may be disabled (_STA method returns 0) in which case the soc_button_array driver will not bind to it and axp20x-pek should handle the power-button. This commit switches from acpi_dev_found to acpi_dev_present to avoid not registering an input-dev for the powerbutton when there is a disabled PNP0C40 device. The ACPI-6.0 standard defines a standard gpio button device using the ACPI0011 HID replacing the custom PNP0C40 gpio device, many newer devices define both PNP0C40 and ACPI0011 devices enabling one or the other depending on whether the BIOS thinks it is going to boot Android or Windows. This commit adds a check for the ACPI0011 device, so that if either device is present *and* enabled we don't register an input-dev for the powerbutton. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 03 June 2017, 00:53:20 UTC
8d4b313 Hans de Goede 03 June 2017, 00:18:47 UTC Input: axp20x-pek - only check for "INTCFD9" ACPI device on Cherry Trail Commit 9b13a4ca8d2c ("Input: axp20x-pek - do not register input device on some systems") added a check for the INTCFD9 ACPI device which also handles the powerbutton as on some systems the powerbutton is connected to both the PMIC, handled by axp20x-pek, and to a gpio on the SoC, handled by soc_button_array which attaches itself to the INTCFD9 ACPI device. Testing + comparing DSDTs has shown that this only happens on Cherry Trail devices with an AXP288 PMIC, the AXP288 PMIC is also used on Bay Trail devices but there the power button is only connected to the PMIC and not handled by soc_button_array. This means that the INTCFD9 check has caused a regression on Bay Trail devices, causing power-button presses to no longer be seen. This commit fixes this by limiting the check to devices where the ACPI node for the AXP288 contains a _HRV (hardware revision) attribute with a value of 3 which indicates we are dealing with a Cherry Trail platform. Fixes: 9b13a4ca8d2c ("Input: axp20x-pek - do not register input ...") Reported-by: Сергей Трусов <t.rus76@ya.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 03 June 2017, 00:53:19 UTC
eadcbfa Dmitry Torokhov 03 June 2017, 00:49:10 UTC Merge tag 'v4.12-rc3' into for-linus Merge with mainline to get acpi_dev_present() needed by patches to axp20x-pek driver. 03 June 2017, 00:49:10 UTC
104c08b Linus Torvalds 02 June 2017, 23:36:23 UTC Merge tag 'acpi-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert one more problematic commit related to the ACPI-based handling of laptop lids and make some unuseful error messages coming from ACPICA go away. Specifics: - Revert one more commit related to the ACPI-based handling of laptop lids that changed the default behavior on laptops that booted with closed lids and introduced a regression there (Benjamin Tissoires). - Add a missing acpi_put_table() to the code implementing the /sys/firmware/acpi/tables interface to prevent a counter in the ACPICA core from overflowing (Dan Williams). - Drop error messages printed by ACPICA on acpi_get_table() reference counting mismatches as they need not indicate real errors at this point (Lv Zheng)" * tag 'acpi-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Tables: Fix regression introduced by a too early mechanism enabling Revert "ACPI / button: Change default behavior to lid_init_state=open" ACPI / sysfs: fix acpi_get_table() leak / acpi-sysfs denial of service 02 June 2017, 23:36:23 UTC
89af529 Linus Torvalds 02 June 2017, 23:33:33 UTC Merge tag 'pm-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix two bugs in error code paths in the cpufreq core and in the kirkwood-cpufreq driver. Specifics: - Make cpufreq_register_driver() return an error if the ->init() calls fail for all CPUs to prevent non-functional drivers from hanging around for no reason (David Arcari). - Make kirkwood-cpufreq check the return value of clk_prepare_enable() (which may fail) as appropriate (Arvind Yadav)" * tag 'pm-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable() cpufreq: cpufreq_register_driver() should return -ENODEV if init fails 02 June 2017, 23:33:33 UTC
5a4829b Linus Torvalds 02 June 2017, 23:19:47 UTC Merge tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull /dev/random bug fix from Ted Ts'o: "Fix a race on architectures with prioritized interrupts (such as m68k) which can causes crashes in drivers/char/random.c:get_reg()" * tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: fix race in drivers/char/random.c:get_reg() 02 June 2017, 23:19:47 UTC
f219764 Linus Torvalds 02 June 2017, 22:49:46 UTC Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: scripts/gdb: make lx-dmesg command work (reliably) mm: consider memblock reservations for deferred memory initialization sizing mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified mlock: fix mlock count can not decrease in race condition mm/migrate: fix refcount handling when !hugepage_migration_supported() dax: fix race between colliding PMD & PTE entries mm: avoid spurious 'bad pmd' warning messages mm/page_alloc.c: make sure OOM victim can try allocations with no watermarks once pcmcia: remove left-over %Z format slub/memcg: cure the brainless abuse of sysfs attributes initramfs: fix disabling of initramfs (and its compression) mm: clarify why we want kmalloc before falling backto vmallock frv: declare jiffies to be located in the .data section include/linux/gfp.h: fix ___GFP_NOLOCKDEP value ksm: prevent crash after write_protect_page fails 02 June 2017, 22:49:46 UTC
d6c9708 André Draszik 02 June 2017, 21:46:51 UTC scripts/gdb: make lx-dmesg command work (reliably) lx-dmesg needs access to the log_buf symbol from printk.c. Unfortunately, the symbol log_buf also exists in BPF's verifier.c and hence gdb can pick one or the other. If it happens to pick BPF's log_buf, lx-dmesg doesn't work: (gdb) lx-dmesg Python Exception <class 'gdb.MemoryError'> Cannot access memory at address 0x0: Error occurred in Python command: Cannot access memory at address 0x0 (gdb) p log_buf $15 = 0x0 Luckily, GDB has a way to deal with this, see https://sourceware.org/gdb/onlinedocs/gdb/Symbols.html (gdb) info variables ^log_buf$ All variables matching regular expression "^log_buf$": File <linux.git>/kernel/bpf/verifier.c: static char *log_buf; File <linux.git>/kernel/printk/printk.c: static char *log_buf; (gdb) p 'verifier.c'::log_buf $1 = 0x0 (gdb) p 'printk.c'::log_buf $2 = 0x811a6aa0 <__log_buf> "" (gdb) p &log_buf $3 = (char **) 0x8120fe40 <log_buf> (gdb) p &'verifier.c'::log_buf $4 = (char **) 0x8120fe40 <log_buf> (gdb) p &'printk.c'::log_buf $5 = (char **) 0x8048b7d0 <log_buf> By being explicit about the location of the symbol, we can make lx-dmesg work again. While at it, do the same for the other symbols we need from printk.c Link: http://lkml.kernel.org/r/20170526112222.3414-1-git@andred.net Signed-off-by: André Draszik <git@andred.net> Tested-by: Kieran Bingham <kieran@bingham.xyz> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2017, 22:07:38 UTC
864b9a3 Michal Hocko 02 June 2017, 21:46:49 UTC mm: consider memblock reservations for deferred memory initialization sizing We have seen an early OOM killer invocation on ppc64 systems with crashkernel=4096M: kthreadd invoked oom-killer: gfp_mask=0x16040c0(GFP_KERNEL|__GFP_COMP|__GFP_NOTRACK), nodemask=7, order=0, oom_score_adj=0 kthreadd cpuset=/ mems_allowed=7 CPU: 0 PID: 2 Comm: kthreadd Not tainted 4.4.68-1.gd7fe927-default #1 Call Trace: dump_stack+0xb0/0xf0 (unreliable) dump_header+0xb0/0x258 out_of_memory+0x5f0/0x640 __alloc_pages_nodemask+0xa8c/0xc80 kmem_getpages+0x84/0x1a0 fallback_alloc+0x2a4/0x320 kmem_cache_alloc_node+0xc0/0x2e0 copy_process.isra.25+0x260/0x1b30 _do_fork+0x94/0x470 kernel_thread+0x48/0x60 kthreadd+0x264/0x330 ret_from_kernel_thread+0x5c/0xa4 Mem-Info: active_anon:0 inactive_anon:0 isolated_anon:0 active_file:0 inactive_file:0 isolated_file:0 unevictable:0 dirty:0 writeback:0 unstable:0 slab_reclaimable:5 slab_unreclaimable:73 mapped:0 shmem:0 pagetables:0 bounce:0 free:0 free_pcp:0 free_cma:0 Node 7 DMA free:0kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:52428800kB managed:110016kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:320kB slab_unreclaimable:4672kB kernel_stack:1152kB pagetables:0kB unstable:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes lowmem_reserve[]: 0 0 0 0 Node 7 DMA: 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 0kB 0 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 0kB Total swap = 0kB 819200 pages RAM 0 pages HighMem/MovableOnly 817481 pages reserved 0 pages cma reserved 0 pages hwpoisoned the reason is that the managed memory is too low (only 110MB) while the rest of the the 50GB is still waiting for the deferred intialization to be done. update_defer_init estimates the initial memoty to initialize to 2GB at least but it doesn't consider any memory allocated in that range. In this particular case we've had Reserving 4096MB of memory at 128MB for crashkernel (System RAM: 51200MB) so the low 2GB is mostly depleted. Fix this by considering memblock allocations in the initial static initialization estimation. Move the max_initialise to reset_deferred_meminit and implement a simple memblock_reserved_memory helper which iterates all reserved blocks and sums the size of all that start below the given address. The cumulative size is than added on top of the initial estimation. This is still not ideal because reset_deferred_meminit doesn't consider holes and so reservation might be above the initial estimation whihch we ignore but let's make the logic simpler until we really need to handle more complicated cases. Fixes: 3a80a7fa7989 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set") Link: http://lkml.kernel.org/r/20170531104010.GI27783@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@suse.de> Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2017, 22:07:38 UTC
9a291a7 James Morse 02 June 2017, 21:46:46 UTC mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified KVM uses get_user_pages() to resolve its stage2 faults. KVM sets the FOLL_HWPOISON flag causing faultin_page() to return -EHWPOISON when it finds a VM_FAULT_HWPOISON. KVM handles these hwpoison pages as a special case. (check_user_page_hwpoison()) When huge pages are involved, this doesn't work so well. get_user_pages() calls follow_hugetlb_page(), which stops early if it receives VM_FAULT_HWPOISON from hugetlb_fault(), eventually returning -EFAULT to the caller. The step to map this to -EHWPOISON based on the FOLL_ flags is missing. The hwpoison special case is skipped, and -EFAULT is returned to user-space, causing Qemu or kvmtool to exit. Instead, move this VM_FAULT_ to errno mapping code into a header file and use it from faultin_page() and follow_hugetlb_page(). With this, KVM works as expected. This isn't a problem for arm64 today as we haven't enabled MEMORY_FAILURE, but I can't see any reason this doesn't happen on x86 too, so I think this should be a fix. This doesn't apply earlier than stable's v4.11.1 due to all sorts of cleanup. [james.morse@arm.com: add vm_fault_to_errno() call to faultin_page()] suggested. Link: http://lkml.kernel.org/r/20170525171035.16359-1-james.morse@arm.com [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170524160900.28786-1-james.morse@arm.com Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> [4.11.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2017, 22:07:38 UTC
70feee0 Yisheng Xie 02 June 2017, 21:46:43 UTC mlock: fix mlock count can not decrease in race condition Kefeng reported that when running the follow test, the mlock count in meminfo will increase permanently: [1] testcase linux:~ # cat test_mlockal grep Mlocked /proc/meminfo for j in `seq 0 10` do for i in `seq 4 15` do ./p_mlockall >> log & done sleep 0.2 done # wait some time to let mlock counter decrease and 5s may not enough sleep 5 grep Mlocked /proc/meminfo linux:~ # cat p_mlockall.c #include <sys/mman.h> #include <stdlib.h> #include <stdio.h> #define SPACE_LEN 4096 int main(int argc, char ** argv) { int ret; void *adr = malloc(SPACE_LEN); if (!adr) return -1; ret = mlockall(MCL_CURRENT | MCL_FUTURE); printf("mlcokall ret = %d\n", ret); ret = munlockall(); printf("munlcokall ret = %d\n", ret); free(adr); return 0; } In __munlock_pagevec() we should decrement NR_MLOCK for each page where we clear the PageMlocked flag. Commit 1ebb7cc6a583 ("mm: munlock: batch NR_MLOCK zone state updates") has introduced a bug where we don't decrement NR_MLOCK for pages where we clear the flag, but fail to isolate them from the lru list (e.g. when the pages are on some other cpu's percpu pagevec). Since PageMlocked stays cleared, the NR_MLOCK accounting gets permanently disrupted by this. Fix it by counting the number of page whose PageMlock flag is cleared. Fixes: 1ebb7cc6a583 (" mm: munlock: batch NR_MLOCK zone state updates") Link: http://lkml.kernel.org/r/1495678405-54569-1-git-send-email-xieyisheng1@huawei.com Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joern Engel <joern@logfs.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michel Lespinasse <walken@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: zhongjiang <zhongjiang@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2017, 22:07:38 UTC
30809f5 Punit Agrawal 02 June 2017, 21:46:40 UTC mm/migrate: fix refcount handling when !hugepage_migration_supported() On failing to migrate a page, soft_offline_huge_page() performs the necessary update to the hugepage ref-count. But when !hugepage_migration_supported() , unmap_and_move_hugepage() also decrements the page ref-count for the hugepage. The combined behaviour leaves the ref-count in an inconsistent state. This leads to soft lockups when running the overcommitted hugepage test from mce-tests suite. Soft offlining pfn 0x83ed600 at process virtual address 0x400000000000 soft offline: 0x83ed600: migration failed 1, type 1fffc00000008008 (uptodate|head) INFO: rcu_preempt detected stalls on CPUs/tasks: Tasks blocked on level-0 rcu_node (CPUs 0-7): P2715 (detected by 7, t=5254 jiffies, g=963, c=962, q=321) thugetlb_overco R running task 0 2715 2685 0x00000008 Call trace: dump_backtrace+0x0/0x268 show_stack+0x24/0x30 sched_show_task+0x134/0x180 rcu_print_detail_task_stall_rnp+0x54/0x7c rcu_check_callbacks+0xa74/0xb08 update_process_times+0x34/0x60 tick_sched_handle.isra.7+0x38/0x70 tick_sched_timer+0x4c/0x98 __hrtimer_run_queues+0xc0/0x300 hrtimer_interrupt+0xac/0x228 arch_timer_handler_phys+0x3c/0x50 handle_percpu_devid_irq+0x8c/0x290 generic_handle_irq+0x34/0x50 __handle_domain_irq+0x68/0xc0 gic_handle_irq+0x5c/0xb0 Address this by changing the putback_active_hugepage() in soft_offline_huge_page() to putback_movable_pages(). This only triggers on systems that enable memory failure handling (ARCH_SUPPORTS_MEMORY_FAILURE) but not hugepage migration (!ARCH_ENABLE_HUGEPAGE_MIGRATION). I imagine this wasn't triggered as there aren't many systems running this configuration. [akpm@linux-foundation.org: remove dead comment, per Naoya] Link: http://lkml.kernel.org/r/20170525135146.32011-1-punit.agrawal@arm.com Reported-by: Manoj Iyer <manoj.iyer@canonical.com> Tested-by: Manoj Iyer <manoj.iyer@canonical.com> Suggested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> [3.14+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2017, 22:07:38 UTC
e209392 Ross Zwisler 02 June 2017, 21:46:37 UTC dax: fix race between colliding PMD & PTE entries We currently have two related PMD vs PTE races in the DAX code. These can both be easily triggered by having two threads reading and writing simultaneously to the same private mapping, with the key being that private mapping reads can be handled with PMDs but private mapping writes are always handled with PTEs so that we can COW. Here is the first race: CPU 0 CPU 1 (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK handle_pte_fault() passes check for pmd_devmap() (private mapping read) __handle_mm_fault() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD dax_iomap_pte_fault() does a PTE fault, but we already have a DAX PMD installed in our page tables at this spot. Here's the second race: CPU 0 CPU 1 (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() handle_pte_fault() dax_iomap_pte_fault() inserts PTE dax_iomap_pmd_fault() inserts PMD, but we already have a PTE at this spot. The core of the issue is that while there is isolation between faults to the same range in the DAX fault handlers via our DAX entry locking, there is no isolation between faults in the code in mm/memory.c. This means for instance that this code in __handle_mm_fault() can run: if (pmd_none(*vmf.pmd) && transparent_hugepage_enabled(vma)) { ret = create_huge_pmd(&vmf); But by the time we actually get to run the fault handler called by create_huge_pmd(), the PMD is no longer pmd_none() because a racing PTE fault has installed a normal PMD here as a parent. This is the cause of the 2nd race. The first race is similar - there is the following check in handle_pte_fault(): } else { /* See comment in pte_alloc_one_map() */ if (pmd_devmap(*vmf->pmd) || pmd_trans_unstable(vmf->pmd)) return 0; So if a pmd_devmap() PMD (a DAX PMD) has been installed at vmf->pmd, we will bail and retry the fault. This is correct, but there is nothing preventing the PMD from being installed after this check but before we actually get to the DAX PTE fault handlers. In my testing these races result in the following types of errors: BUG: Bad rss-counter state mm:ffff8800a817d280 idx:1 val:1 BUG: non-zero nr_ptes on freeing mm: 15 Fix this issue by having the DAX fault handlers verify that it is safe to continue their fault after they have taken an entry lock to block other racing faults. [ross.zwisler@linux.intel.com: improve fix for colliding PMD & PTE entries] Link: http://lkml.kernel.org/r/20170526195932.32178-1-ross.zwisler@linux.intel.com Link: http://lkml.kernel.org/r/20170522215749.23516-2-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: Pawel Lebioda <pawel.lebioda@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Pawel Lebioda <pawel.lebioda@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Xiong Zhou <xzhou@redhat.com> Cc: Eryu Guan <eguan@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2017, 22:07:37 UTC
d0f0931 Ross Zwisler 02 June 2017, 21:46:34 UTC mm: avoid spurious 'bad pmd' warning messages When the pmd_devmap() checks were added by 5c7fb56e5e3f ("mm, dax: dax-pmd vs thp-pmd vs hugetlbfs-pmd") to add better support for DAX huge pages, they were all added to the end of if() statements after existing pmd_trans_huge() checks. So, things like: - if (pmd_trans_huge(*pmd)) + if (pmd_trans_huge(*pmd) || pmd_devmap(*pmd)) When further checks were added after pmd_trans_unstable() checks by commit 7267ec008b5c ("mm: postpone page table allocation until we have page to map") they were also added at the end of the conditional: + if (pmd_trans_unstable(fe->pmd) || pmd_devmap(*fe->pmd)) This ordering is fine for pmd_trans_huge(), but doesn't work for pmd_trans_unstable(). This is because DAX huge pages trip the bad_pmd() check inside of pmd_none_or_trans_huge_or_clear_bad() (called by pmd_trans_unstable()), which prints out a warning and returns 1. So, we do end up doing the right thing, but only after spamming dmesg with suspicious looking messages: mm/pgtable-generic.c:39: bad pmd ffff8808daa49b88(84000001006000a5) Reorder these checks in a helper so that pmd_devmap() is checked first, avoiding the error messages, and add a comment explaining why the ordering is important. Fixes: commit 7267ec008b5c ("mm: postpone page table allocation until we have page to map") Link: http://lkml.kernel.org/r/20170522215749.23516-1-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Pawel Lebioda <pawel.lebioda@intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Xiong Zhou <xzhou@redhat.com> Cc: Eryu Guan <eguan@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2017, 22:07:37 UTC
c288983 Tetsuo Handa 02 June 2017, 21:46:31 UTC mm/page_alloc.c: make sure OOM victim can try allocations with no watermarks once Roman Gushchin has reported that the OOM killer can trivially selects next OOM victim when a thread doing memory allocation from page fault path was selected as first OOM victim. allocate invoked oom-killer: gfp_mask=0x14280ca(GFP_HIGHUSER_MOVABLE|__GFP_ZERO), nodemask=(null), order=0, oom_score_adj=0 allocate cpuset=/ mems_allowed=0 CPU: 1 PID: 492 Comm: allocate Not tainted 4.12.0-rc1-mm1+ #181 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: oom_kill_process+0x219/0x3e0 out_of_memory+0x11d/0x480 __alloc_pages_slowpath+0xc84/0xd40 __alloc_pages_nodemask+0x245/0x260 alloc_pages_vma+0xa2/0x270 __handle_mm_fault+0xca9/0x10c0 handle_mm_fault+0xf3/0x210 __do_page_fault+0x240/0x4e0 trace_do_page_fault+0x37/0xe0 do_async_page_fault+0x19/0x70 async_page_fault+0x28/0x30 ... Out of memory: Kill process 492 (allocate) score 899 or sacrifice child Killed process 492 (allocate) total-vm:2052368kB, anon-rss:1894576kB, file-rss:4kB, shmem-rss:0kB allocate: page allocation failure: order:0, mode:0x14280ca(GFP_HIGHUSER_MOVABLE|__GFP_ZERO), nodemask=(null) allocate cpuset=/ mems_allowed=0 CPU: 1 PID: 492 Comm: allocate Not tainted 4.12.0-rc1-mm1+ #181 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: __alloc_pages_slowpath+0xd32/0xd40 __alloc_pages_nodemask+0x245/0x260 alloc_pages_vma+0xa2/0x270 __handle_mm_fault+0xca9/0x10c0 handle_mm_fault+0xf3/0x210 __do_page_fault+0x240/0x4e0 trace_do_page_fault+0x37/0xe0 do_async_page_fault+0x19/0x70 async_page_fault+0x28/0x30 ... oom_reaper: reaped process 492 (allocate), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB ... allocate invoked oom-killer: gfp_mask=0x0(), nodemask=(null), order=0, oom_score_adj=0 allocate cpuset=/ mems_allowed=0 CPU: 1 PID: 492 Comm: allocate Not tainted 4.12.0-rc1-mm1+ #181 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: oom_kill_process+0x219/0x3e0 out_of_memory+0x11d/0x480 pagefault_out_of_memory+0x68/0x80 mm_fault_error+0x8f/0x190 ? handle_mm_fault+0xf3/0x210 __do_page_fault+0x4b2/0x4e0 trace_do_page_fault+0x37/0xe0 do_async_page_fault+0x19/0x70 async_page_fault+0x28/0x30 ... Out of memory: Kill process 233 (firewalld) score 10 or sacrifice child Killed process 233 (firewalld) total-vm:246076kB, anon-rss:20956kB, file-rss:0kB, shmem-rss:0kB There is a race window that the OOM reaper completes reclaiming the first victim's memory while nothing but mutex_trylock() prevents the first victim from calling out_of_memory() from pagefault_out_of_memory() after memory allocation for page fault path failed due to being selected as an OOM victim. This is a side effect of commit 9a67f6488eca926f ("mm: consolidate GFP_NOFAIL checks in the allocator slowpath") because that commit silently changed the behavior from /* Avoid allocations with no watermarks from looping endlessly */ to /* * Give up allocations without trying memory reserves if selected * as an OOM victim */ in __alloc_pages_slowpath() by moving the location to check TIF_MEMDIE flag. I have noticed this change but I didn't post a patch because I thought it is an acceptable change other than noise by warn_alloc() because !__GFP_NOFAIL allocations are allowed to fail. But we overlooked that failing memory allocation from page fault path makes difference due to the race window explained above. While it might be possible to add a check to pagefault_out_of_memory() that prevents the first victim from calling out_of_memory() or remove out_of_memory() from pagefault_out_of_memory(), changing pagefault_out_of_memory() does not suppress noise by warn_alloc() when allocating thread was selected as an OOM victim. There is little point with printing similar backtraces and memory information from both out_of_memory() and warn_alloc(). Instead, if we guarantee that current thread can try allocations with no watermarks once when current thread looping inside __alloc_pages_slowpath() was selected as an OOM victim, we can follow "who can use memory reserves" rules and suppress noise by warn_alloc() and prevent memory allocations from page fault path from calling pagefault_out_of_memory(). If we take the comment literally, this patch would do - if (test_thread_flag(TIF_MEMDIE)) - goto nopage; + if (alloc_flags == ALLOC_NO_WATERMARKS || (gfp_mask & __GFP_NOMEMALLOC)) + goto nopage; because gfp_pfmemalloc_allowed() returns false if __GFP_NOMEMALLOC is given. But if I recall correctly (I couldn't find the message), the condition is meant to apply to only OOM victims despite the comment. Therefore, this patch preserves TIF_MEMDIE check. Fixes: 9a67f6488eca926f ("mm: consolidate GFP_NOFAIL checks in the allocator slowpath") Link: http://lkml.kernel.org/r/201705192112.IAF69238.OQOHSJLFOFFMtV@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: Roman Gushchin <guro@fb.com> Tested-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <stable@vger.kernel.org> [4.11] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2017, 22:07:37 UTC
ff5a201 Nicolas Iooss 02 June 2017, 21:46:28 UTC pcmcia: remove left-over %Z format Commit 5b5e0928f742 ("lib/vsprintf.c: remove %Z support") removed some usages of format %Z but forgot "%.2Zx". This makes clang 4.0 reports a -Wformat-extra-args warning because it does not know about %Z. Replace %Z with %z. Link: http://lkml.kernel.org/r/20170520090946.22562-1-nicolas.iooss_linux@m4x.org Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Harald Welte <laforge@gnumonks.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2017, 22:07:37 UTC
478fe30 Thomas Gleixner 02 June 2017, 21:46:25 UTC slub/memcg: cure the brainless abuse of sysfs attributes memcg_propagate_slab_attrs() abuses the sysfs attribute file functions to propagate settings from the root kmem_cache to a newly created kmem_cache. It does that with: attr->show(root, buf); attr->store(new, buf, strlen(bug); Aside of being a lazy and absurd hackery this is broken because it does not check the return value of the show() function. Some of the show() functions return 0 w/o touching the buffer. That means in such a case the store function is called with the stale content of the previous show(). That causes nonsense like invoking kmem_cache_shrink() on a newly created kmem_cache. In the worst case it would cause handing in an uninitialized buffer. This should be rewritten proper by adding a propagate() callback to those slub_attributes which must be propagated and avoid that insane conversion to and from ASCII, but that's too large for a hot fix. Check at least the return value of the show() function, so calling store() with stale content is prevented. Steven said: "It can cause a deadlock with get_online_cpus() that has been uncovered by recent cpu hotplug and lockdep changes that Thomas and Peter have been doing. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpu_hotplug.lock); lock(slab_mutex); lock(cpu_hotplug.lock); lock(slab_mutex); *** DEADLOCK ***" Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705201244540.2255@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2017, 22:07:37 UTC
57ddfda Florian Fainelli 02 June 2017, 21:46:22 UTC initramfs: fix disabling of initramfs (and its compression) Commit db2aa7fd15e8 ("initramfs: allow again choice of the embedded initram compression algorithm") introduced the possibility to select the initramfs compression algorithm from Kconfig and while this is a nice feature it broke the use case described below. Here is what my build system does: - kernel is initially configured not to have an initramfs included - build the user space root file system - re-configure the kernel to have an initramfs included (CONFIG_INITRAMFS_SOURCE="/path/to/romfs") and set relevant CONFIG_INITRAMFS options, in my case, no compression option (CONFIG_INITRAMFS_COMPRESSION_NONE) - kernel is re-built with these options -> kernel+initramfs image is copied - kernel is re-built again without these options -> kernel image is copied Building a kernel without an initramfs means setting this option: CONFIG_INITRAMFS_SOURCE="" (and this one only) whereas building a kernel with an initramfs means setting these options: CONFIG_INITRAMFS_SOURCE="/home/fainelli/work/uclinux-rootfs/romfs /home/fainelli/work/uclinux-rootfs/misc/initramfs.dev" CONFIG_INITRAMFS_ROOT_UID=1000 CONFIG_INITRAMFS_ROOT_GID=1000 CONFIG_INITRAMFS_COMPRESSION_NONE=y CONFIG_INITRAMFS_COMPRESSION="" Commit db2aa7fd15e85 ("initramfs: allow again choice of the embedded initram compression algorithm") is problematic because CONFIG_INITRAMFS_COMPRESSION which is used to determine the initramfs_data.cpio extension/compression is a string, and due to how Kconfig works it will evaluate in order, how to assign it. Setting CONFIG_INITRAMFS_COMPRESSION_NONE with CONFIG_INITRAMFS_SOURCE="" cannot possibly work (because of the depends on INITRAMFS_SOURCE!="" imposed on CONFIG_INITRAMFS_COMPRESSION ) yet we still get CONFIG_INITRAMFS_COMPRESSION assigned to ".gz" because CONFIG_RD_GZIP=y is set in my kernel, even when there is no initramfs being built. So we basically end-up generating two initramfs_data.cpio* files, one without extension, and one with .gz. This causes usr/Makefile to track usr/initramfs_data.cpio.gz, and not usr/initramfs_data.cpio anymore, that is also largely problematic after 9e3596b0c6539e ("kbuild: initramfs cleanup, set target from Kconfig") because we used to track all possible initramfs_data files in the $(targets) variable before that commit. The end result is that the kernel with an initramfs clearly does not contain what we expect it to, it has a stale initramfs_data.cpio file built into it, and we keep re-generating an initramfs_data.cpio.gz file which is not the one that we want to include in the kernel image proper. The fix consists in hiding CONFIG_INITRAMFS_COMPRESSION when CONFIG_INITRAMFS_SOURCE="". This puts us back in a state to the pre-4.10 behavior where we can properly disable and re-enable initramfs within the same kernel .config file, and be in control of what CONFIG_INITRAMFS_COMPRESSION is set to. Fixes: db2aa7fd15e8 ("initramfs: allow again choice of the embedded initram compression algorithm") Fixes: 9e3596b0c653 ("kbuild: initramfs cleanup, set target from Kconfig") Link: http://lkml.kernel.org/r/20170521033337.6197-1-f.fainelli@gmail.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nicholas Piggin <npiggin@gmail.com> Cc: P J P <ppandit@redhat.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Michal Marek <mmarek@suse.cz> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2017, 22:07:37 UTC
4f4f2ba Michal Hocko 02 June 2017, 21:46:19 UTC mm: clarify why we want kmalloc before falling backto vmallock While converting drm_[cm]alloc* helpers to kvmalloc* variants Chris Wilson has wondered why we want to try kmalloc before vmalloc fallback even for larger allocations requests. Let's clarify that one larger physically contiguous block is less likely to fragment memory than many scattered pages which can prevent more large blocks from being created. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170517080932.21423-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2017, 22:07:37 UTC
60b0a8c Matthias Kaehlcke 02 June 2017, 21:46:16 UTC frv: declare jiffies to be located in the .data section Commit 7c30f352c852 ("jiffies.h: declare jiffies and jiffies_64 with ____cacheline_aligned_in_smp") removed a section specification from the jiffies declaration that caused conflicts on some platforms. Unfortunately this change broke the build for frv: kernel/built-in.o: In function `__do_softirq': (.text+0x6460): relocation truncated to fit: R_FRV_GPREL12 against symbol `jiffies' defined in *ABS* section in .tmp_vmlinux1 kernel/built-in.o: In function `__do_softirq': (.text+0x6574): relocation truncated to fit: R_FRV_GPREL12 against symbol `jiffies' defined in *ABS* section in .tmp_vmlinux1 kernel/built-in.o: In function `pwq_activate_delayed_work': workqueue.c:(.text+0x15b9c): relocation truncated to fit: R_FRV_GPREL12 against symbol `jiffies' defined in *ABS* section in .tmp_vmlinux1 ... Add __jiffy_arch_data to the declaration of jiffies and use it on frv to include the section specification. For all other platforms __jiffy_arch_data (currently) has no effect. Fixes: 7c30f352c852 ("jiffies.h: declare jiffies and jiffies_64 with ____cacheline_aligned_in_smp") Link: http://lkml.kernel.org/r/20170516221333.177280-1-mka@chromium.org Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: David Howells <dhowells@redhat.com> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2017, 22:07:37 UTC
1bde33e Michal Hocko 02 June 2017, 21:46:13 UTC include/linux/gfp.h: fix ___GFP_NOLOCKDEP value Igor Stoppa has noticed that __GFP_NOLOCKDEP can use a lower bit. At the time commit 7e7844226f10 ("lockdep: allow to disable reclaim lockup detection") was written we still had __GFP_OTHER_NODE but I have removed it in commit 41b6167e8f74 ("mm: get rid of __GFP_OTHER_NODE") and forgot to lower the bit value. The current value is outside of __GFP_BITS_SHIFT so it cannot be used actually. Fixes: 7e7844226f10 ("lockdep: allow to disable reclaim lockup detection") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Igor Stoppa <igor.stoppa@nokia.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2017, 22:07:37 UTC
back to top