Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
70365d4 cth103 03 November 2017, 21:16:17 UTC this code very very a lot fast 03 November 2017, 21:16:17 UTC
d4c2e9f Linus Torvalds 03 November 2017, 20:56:15 UTC Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One fix for USB clks on Uniphier PXs3 SoCs" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: uniphier: fix clock data for PXs3 03 November 2017, 20:56:15 UTC
81ca2ca Linus Torvalds 03 November 2017, 17:36:43 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile fixes from Chris Metcalf: "Two one-line bug fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: Implement ->set_state_oneshot_stopped() tile: pass machine size to sparse 03 November 2017, 17:36:43 UTC
01073ac Linus Torvalds 03 November 2017, 17:26:40 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One minor fix in the error leg of the qla2xxx driver (it oopses the system if we get an error trying to start the internal kernel thread). The fix is minor because the problem isn't often encountered in the field (although it can be induced by inserting the module in a low memory environment)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix oops in qla2x00_probe_one error path 03 November 2017, 17:26:40 UTC
777a45b Chris Metcalf 03 November 2017, 17:20:54 UTC arch/tile: Implement ->set_state_oneshot_stopped() set_state_oneshot_stopped() is called by the clkevt core, when the next event is required at an expiry time of 'KTIME_MAX'. This normally happens with NO_HZ_{IDLE|FULL} in both LOWRES/HIGHRES modes. This patch makes the clockevent device to stop on such an event, to avoid spurious interrupts, as explained by: commit 8fff52fd5093 ("clockevents: Introduce CLOCK_EVT_STATE_ONESHOT_STOPPED state"). Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> 03 November 2017, 17:20:54 UTC
866ba84 Linus Torvalds 03 November 2017, 16:25:53 UTC Merge tag 'powerpc-4.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 4.14. This is bigger than I like to send at rc7, but that's at least partly because I didn't send any fixes last week. If it wasn't for the IMC driver, which is new and getting heavy testing, the diffstat would look a bit better. I've also added ftrace on big endian to my test suite, so we shouldn't break that again in future. - A fix to the handling of misaligned paste instructions (P9 only), where a change to a #define has caused the check for the instruction to always fail. - The preempt handling was unbalanced in the radix THP flush (P9 only). Though we don't generally use preempt we want to keep it working as much as possible. - Two fixes for IMC (P9 only), one when booting with restricted number of CPUs and one in the error handling when initialisation fails due to firmware etc. - A revert to fix function_graph on big endian machines, and then a rework of the reverted patch to fix kprobes blacklist handling on big endian machines. Thanks to: Anju T Sudhakar, Guilherme G. Piccoli, Madhavan Srinivasan, Naveen N. Rao, Nicholas Piggin, Paul Mackerras" * tag 'powerpc-4.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/perf: Fix core-imc hotplug callback failure during imc initialization powerpc/kprobes: Dereference function pointers only if the address does not belong to kernel text Revert "powerpc64/elfv1: Only dereference function descriptor for non-text symbols" powerpc/64s/radix: Fix preempt imbalance in TLB flush powerpc: Fix check for copy/paste instructions in alignment handler powerpc/perf: Fix IMC allocation routine 03 November 2017, 16:25:53 UTC
3f46540 Linus Torvalds 03 November 2017, 16:19:20 UTC Merge tag 'mmc-v4.14-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "Fix dw_mmc request timeout issues" * tag 'mmc-v4.14-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: dw_mmc: Fix the DTO timeout calculation mmc: dw_mmc: Add locking to the CTO timer mmc: dw_mmc: Fix the CTO timeout calculation mmc: dw_mmc: cancel the CTO timer after a voltage switch 03 November 2017, 16:19:20 UTC
e65a139 Linus Torvalds 03 November 2017, 16:14:22 UTC Merge tag 'drm-fixes-for-v4.14-rc8' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: - one nouveau regression fix - some amdgpu fixes for stable to fix hangs on some harvested Polaris GPUs - a set of KASAN and regression fixes for i915, their CI system seems to be working pretty well now. * tag 'drm-fixes-for-v4.14-rc8' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: allow harvesting check for Polaris VCE drm/amdgpu: return -ENOENT from uvd 6.0 early init for harvesting drm/i915: Check incoming alignment for unfenced buffers (on i915gm) drm/nouveau/kms/nv50: use the correct state for base channel notifier setup drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr) drm/i915: Hold rcu_read_lock when iterating over the radixtree (objects) drm/i915/edp: read edp display control registers unconditionally drm/i915: Do not rely on wm preservation for ILK watermarks drm/i915: Cancel the modeset retry work during modeset cleanup 03 November 2017, 16:14:22 UTC
7ba3ebf Linus Torvalds 03 November 2017, 16:09:21 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: "Hopefully this is the last batch of networking fixes for 4.14 Fingers crossed... 1) Fix stmmac to use the proper sized OF property read, from Bhadram Varka. 2) Fix use after free in net scheduler tc action code, from Cong Wang. 3) Fix SKB control block mangling in tcp_make_synack(). 4) Use proper locking in fib_dump_info(), from Florian Westphal. 5) Fix IPG encodings in systemport driver, from Florian Fainelli. 6) Fix division by zero in NV TCP congestion control module, from Konstantin Khlebnikov. 7) Fix use after free in nf_reject_ipv4, from Tejaswi Tanikella" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: systemport: Correct IPG length settings tcp: do not mangle skb->cb[] in tcp_make_synack() fib: fib_dump_info can no longer use __in_dev_get_rtnl stmmac: use of_property_read_u32 instead of read_u8 net_sched: hold netns refcnt for each action net_sched: acquire RTNL in tc_action_net_exit() net: vrf: correct FRA_L3MDEV encode type tcp_nv: fix division by zero in tcpnv_acked() netfilter: nf_reject_ipv4: Fix use-after-free in send_reset netfilter: nft_set_hash: disable fast_ops for 2-len keys 03 November 2017, 16:09:21 UTC
f0395d5 Linus Torvalds 03 November 2017, 16:03:50 UTC Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "7 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, swap: fix race between swap count continuation operations mm/huge_memory.c: deposit page table when copying a PMD migration entry initramfs: fix initramfs rebuilds w/ compression after disabling fs/hugetlbfs/inode.c: fix hwpoison reserve accounting ocfs2: fstrim: Fix start offset of first cluster group during fstrim mm, /proc/pid/pagemap: fix soft dirty marking for PMD migration entry userfaultfd: hugetlbfs: prevent UFFDIO_COPY to fill beyond the end of i_size 03 November 2017, 16:03:50 UTC
fb615d6 Paul Burton 26 October 2017, 00:04:33 UTC Update MIPS email addresses MIPS will soon not be a part of Imagination Technologies, and as such many @imgtec.com email addresses will no longer be valid. This patch updates the addresses for those who: - Have 10 or more patches in mainline authored using an @imgtec.com email address, or any patches dated within the past year. - Are still with Imagination but leaving as part of the MIPS business unit, as determined from an internal email address list. - Haven't already updated their email address (ie. JamesH) or expressed a desire to be excluded (ie. Maciej). - Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt & myself. New addresses are of the form firstname.lastname@mips.com, and all verified against an internal email address list. An entry is added to .mailmap for each person such that get_maintainer.pl will report the new addresses rather than @imgtec.com addresses which will soon be dead. Instances of the affected addresses throughout the tree are then mechanically replaced with the new @mips.com address. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@mips.com> Acked-by: Dengcheng Zhu <dengcheng.zhu@mips.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Matt Redfearn <matt.redfearn@mips.com> Acked-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 November 2017, 16:02:30 UTC
941f5f0 Rafael J. Wysocki 03 November 2017, 15:35:49 UTC x86: CPU: Fix up "cpu MHz" in /proc/cpuinfo Commit 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") is not sufficient to restore the previous behavior of "cpu MHz" in /proc/cpuinfo on x86 due to some changes made after the commit it has reverted. To address this, make the code in question use arch_freq_get_on_cpu() which also is used by cpufreq for reporting the current frequency of CPUs and since that function doesn't really depend on cpufreq in any way, drop the CONFIG_CPU_FREQ dependency for the object file containing it. Also refactor arch_freq_get_on_cpu() somewhat to avoid IPIs and return cached values right away if it is called very often over a short time (to prevent user space from triggering IPI storms through it). Fixes: 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") Cc: stable@kernel.org # 4.13 - together with 890da9cf0983 Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 November 2017, 15:50:13 UTC
2628bd6 Huang Ying 02 November 2017, 22:59:50 UTC mm, swap: fix race between swap count continuation operations One page may store a set of entries of the sis->swap_map (swap_info_struct->swap_map) in multiple swap clusters. If some of the entries has sis->swap_map[offset] > SWAP_MAP_MAX, multiple pages will be used to store the set of entries of the sis->swap_map. And the pages are linked with page->lru. This is called swap count continuation. To access the pages which store the set of entries of the sis->swap_map simultaneously, previously, sis->lock is used. But to improve the scalability of __swap_duplicate(), swap cluster lock may be used in swap_count_continued() now. This may race with add_swap_count_continuation() which operates on a nearby swap cluster, in which the sis->swap_map entries are stored in the same page. The race can cause wrong swap count in practice, thus cause unfreeable swap entries or software lockup, etc. To fix the race, a new spin lock called cont_lock is added to struct swap_info_struct to protect the swap count continuation page list. This is a lock at the swap device level, so the scalability isn't very well. But it is still much better than the original sis->lock, because it is only acquired/released when swap count continuation is used. Which is considered rare in practice. If it turns out that the scalability becomes an issue for some workloads, we can split the lock into some more fine grained locks. Link: http://lkml.kernel.org/r/20171017081320.28133-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 November 2017, 14:39:19 UTC
dd8a67f Zi Yan 02 November 2017, 22:59:47 UTC mm/huge_memory.c: deposit page table when copying a PMD migration entry We need to deposit pre-allocated PTE page table when a PMD migration entry is copied in copy_huge_pmd(). Otherwise, we will leak the pre-allocated page and cause a NULL pointer dereference later in zap_huge_pmd(). The missing counters during PMD migration entry copy process are added as well. The bug report is here: https://lkml.org/lkml/2017/10/29/214 Link: http://lkml.kernel.org/r/20171030144636.4836-1-zi.yan@sent.com Fixes: 84c3fc4e9c563 ("mm: thp: check pmd migration entry in common path") Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 November 2017, 14:39:19 UTC
e08b187 Florian Fainelli 02 November 2017, 22:59:44 UTC initramfs: fix initramfs rebuilds w/ compression after disabling This is a follow-up to commit 57ddfdaa9a72 ("initramfs: fix disabling of initramfs (and its compression)"). This particular commit fixed the use case where we build the kernel with an initramfs with no compression, and then we build the kernel with no initramfs. Now this still left us with the same case as described here: http://lkml.kernel.org/r/20170521033337.6197-1-f.fainelli@gmail.com not working with initramfs compression. This can be seen by the following steps/timestamps: https://www.spinics.net/lists/kernel/msg2598153.html .initramfs_data.cpio.gz.cmd is correct: cmd_usr/initramfs_data.cpio.gz := /bin/bash ./scripts/gen_initramfs_list.sh -o usr/initramfs_data.cpio.gz -u 1000 -g 1000 /home/fainelli/work/uclinux-rootfs/romfs /home/fainelli/work/uclinux-rootfs/misc/initramfs.dev and was generated the first time we did generate the gzip initramfs, so the command has not changed, nor its arguments, so we just don't call it, no initramfs cpio is re-generated as a consequence. The fix for this problem is just to properly keep track of the .initramfs_cpio_data.d file by suffixing it with the compression extension. This takes care of properly tracking dependencies such that the initramfs get (re)generated any time files are added/deleted etc. Link: http://lkml.kernel.org/r/20170930033936.6722-1-f.fainelli@gmail.com Fixes: db2aa7fd15e8 ("initramfs: allow again choice of the embedded initramfs compression algorithm") Fixes: 9e3596b0c653 ("kbuild: initramfs cleanup, set target from Kconfig") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: "Francisco Blas Izquierdo Riera (klondike)" <klondike@xiscosoft.net> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 November 2017, 14:39:19 UTC
ab615a5 Mike Kravetz 02 November 2017, 22:59:41 UTC fs/hugetlbfs/inode.c: fix hwpoison reserve accounting Calling madvise(MADV_HWPOISON) on a hugetlbfs page will result in bad (negative) reserved huge page counts. This may not happen immediately, but may happen later when the underlying file is removed or filesystem unmounted. For example: AnonHugePages: 0 kB ShmemHugePages: 0 kB HugePages_Total: 1 HugePages_Free: 0 HugePages_Rsvd: 18446744073709551615 HugePages_Surp: 0 Hugepagesize: 2048 kB In routine hugetlbfs_error_remove_page(), hugetlb_fix_reserve_counts is called after remove_huge_page. hugetlb_fix_reserve_counts is designed to only be called/used only if a failure is returned from hugetlb_unreserve_pages. Therefore, call hugetlb_unreserve_pages as required and only call hugetlb_fix_reserve_counts in the unlikely event that hugetlb_unreserve_pages returns an error. Link: http://lkml.kernel.org/r/20171019230007.17043-2-mike.kravetz@oracle.com Fixes: 78bb920344b8 ("mm: hwpoison: dissolve in-use hugepage in unrecoverable memory error") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 November 2017, 14:39:19 UTC
105ddc9 Ashish Samant 02 November 2017, 22:59:37 UTC ocfs2: fstrim: Fix start offset of first cluster group during fstrim The first cluster group descriptor is not stored at the start of the group but at an offset from the start. We need to take this into account while doing fstrim on the first cluster group. Otherwise we will wrongly start fstrim a few blocks after the desired start block and the range can cross over into the next cluster group and zero out the group descriptor there. This can cause filesytem corruption that cannot be fixed by fsck. Link: http://lkml.kernel.org/r/1507835579-7308-1-git-send-email-ashish.samant@oracle.com Signed-off-by: Ashish Samant <ashish.samant@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 November 2017, 14:39:19 UTC
b83d7e4 Huang Ying 02 November 2017, 22:59:34 UTC mm, /proc/pid/pagemap: fix soft dirty marking for PMD migration entry When the pagetable is walked in the implementation of /proc/<pid>/pagemap, pmd_soft_dirty() is used for both the PMD huge page map and the PMD migration entries. That is wrong, pmd_swp_soft_dirty() should be used for the PMD migration entries instead because the different page table entry flag is used. As a result, /proc/pid/pagemap may report incorrect soft dirty information for PMD migration entries. Link: http://lkml.kernel.org/r/20171017081818.31795-1-ying.huang@intel.com Fixes: 84c3fc4e9c56 ("mm: thp: check pmd migration entry in common path") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Hugh Dickins <hughd@google.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Daniel Colascione <dancol@google.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 November 2017, 14:39:19 UTC
1e39214 Andrea Arcangeli 02 November 2017, 22:59:29 UTC userfaultfd: hugetlbfs: prevent UFFDIO_COPY to fill beyond the end of i_size This oops: kernel BUG at fs/hugetlbfs/inode.c:484! RIP: remove_inode_hugepages+0x3d0/0x410 Call Trace: hugetlbfs_setattr+0xd9/0x130 notify_change+0x292/0x410 do_truncate+0x65/0xa0 do_sys_ftruncate.constprop.3+0x11a/0x180 SyS_ftruncate+0xe/0x10 tracesys+0xd9/0xde was caused by the lack of i_size check in hugetlb_mcopy_atomic_pte. mmap() can still succeed beyond the end of the i_size after vmtruncate zapped vmas in those ranges, but the faults must not succeed, and that includes UFFDIO_COPY. We could differentiate the retval to userland to represent a SIGBUS like a page fault would do (vs SIGSEGV), but it doesn't seem very useful and we'd need to pick a random retval as there's no meaningful syscall retval that would differentiate from SIGSEGV and SIGBUS, there's just -EFAULT. Link: http://lkml.kernel.org/r/20171016223914.2421-2-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 November 2017, 14:39:19 UTC
93824c8 Florian Fainelli 02 November 2017, 23:08:40 UTC net: systemport: Correct IPG length settings Due to a documentation mistake, the IPG length was set to 0x12 while it should have been 12 (decimal). This would affect short packet (64B typically) performance since the IPG was bigger than necessary. Fixes: 44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 November 2017, 05:30:02 UTC
3b11775 Eric Dumazet 02 November 2017, 19:30:25 UTC tcp: do not mangle skb->cb[] in tcp_make_synack() Christoph Paasch sent a patch to address the following issue : tcp_make_synack() is leaving some TCP private info in skb->cb[], then send the packet by other means than tcp_transmit_skb() tcp_transmit_skb() makes sure to clear skb->cb[] to not confuse IPv4/IPV6 stacks, but we have no such cleanup for SYNACK. tcp_make_synack() should not use tcp_init_nondata_skb() : tcp_init_nondata_skb() really should be limited to skbs put in write/rtx queues (the ones that are only sent via tcp_transmit_skb()) This patch fixes the issue and should even save few cpu cycles ;) Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 November 2017, 05:29:01 UTC
25dd169 Florian Westphal 02 November 2017, 15:02:20 UTC fib: fib_dump_info can no longer use __in_dev_get_rtnl syzbot reported yet another regression added with DOIT_UNLOCKED. When nexthop is marked as dead, fib_dump_info uses __in_dev_get_rtnl(): ./include/linux/inetdevice.h:230 suspicious rcu_dereference_protected() usage! rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz-executor2/23859: #0: (rcu_read_lock){....}, at: [<ffffffff840283f0>] inet_rtm_getroute+0xaa0/0x2d70 net/ipv4/route.c:2738 [..] lockdep_rcu_suspicious+0x123/0x170 kernel/locking/lockdep.c:4665 __in_dev_get_rtnl include/linux/inetdevice.h:230 [inline] fib_dump_info+0x1136/0x13d0 net/ipv4/fib_semantics.c:1377 inet_rtm_getroute+0xf97/0x2d70 net/ipv4/route.c:2785 .. This isn't safe anymore, callers either hold RTNL mutex or rcu read lock, so these spots must use rcu_dereference_rtnl() or plain rcu_derefence() (plus unconditional rcu read lock). This does the latter. Fixes: 394f51abb3d04f ("ipv4: route: set ipv4 RTM_GETROUTE to not use rtnl") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> 03 November 2017, 05:27:46 UTC
e73b49e Bhadram Varka 02 November 2017, 07:22:13 UTC stmmac: use of_property_read_u32 instead of read_u8 Numbers in DT are stored in “cells” which are 32-bits in size. of_property_read_u8 does not work properly because of endianness problem. This causes it to always return 0 with little-endian architectures. Fix it by using of_property_read_u32() OF API. Signed-off-by: Bhadram Varka <vbhadram@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 November 2017, 05:15:06 UTC
2f2b1ae David S. Miller 03 November 2017, 01:30:39 UTC Merge branch 'net-sched-use-after-free' Cong Wang says: ==================== net_sched: fix a use-after-free for tc actions This patchset fixes a use-after-free reported by Lucas and closes potential races too. Please see each patch for details. ==================== Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 November 2017, 01:30:39 UTC
ceffcc5 Cong Wang 01 November 2017, 17:23:50 UTC net_sched: hold netns refcnt for each action TC actions have been destroyed asynchronously for a long time, previously in a RCU callback and now in a workqueue. If we don't hold a refcnt for its netns, we could use the per netns data structure, struct tcf_idrinfo, after it has been freed by netns workqueue. Hold refcnt to ensure netns destroy happens after all actions are gone. Fixes: ddf97ccdd7cb ("net_sched: add network namespace support for tc actions") Reported-by: Lucas Bates <lucasb@mojatatu.com> Tested-by: Lucas Bates <lucasb@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 November 2017, 01:30:38 UTC
a159d3c Cong Wang 01 November 2017, 17:23:49 UTC net_sched: acquire RTNL in tc_action_net_exit() I forgot to acquire RTNL in tc_action_net_exit() which leads that action ops->cleanup() is not always called with RTNL. This usually is not a big deal because this function is called after all netns refcnt are gone, but given RTNL protects more than just actions, add it for safety and consistency. Also add an assertion to catch other potential bugs. Fixes: ddf97ccdd7cb ("net_sched: add network namespace support for tc actions") Reported-by: Lucas Bates <lucasb@mojatatu.com> Tested-by: Lucas Bates <lucasb@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 November 2017, 01:30:38 UTC
7ecb37f Madhavan Srinivasan 02 November 2017, 12:12:26 UTC powerpc/perf: Fix core-imc hotplug callback failure during imc initialization Call trace observed during boot: nest_capp0_imc performance monitor hardware support registered nest_capp1_imc performance monitor hardware support registered core_imc memory allocation for cpu 56 failed Unable to handle kernel paging request for data at address 0xffa400010 Faulting instruction address: 0xc000000000bf3294 0:mon> e cpu 0x0: Vector: 300 (Data Access) at [c000000ff38ff8d0] pc: c000000000bf3294: mutex_lock+0x34/0x90 lr: c000000000bf3288: mutex_lock+0x28/0x90 sp: c000000ff38ffb50 msr: 9000000002009033 dar: ffa400010 dsisr: 80000 current = 0xc000000ff383de00 paca = 0xc000000007ae0000 softe: 0 irq_happened: 0x01 pid = 13, comm = cpuhp/0 Linux version 4.11.0-39.el7a.ppc64le (mockbuild@ppc-058.build.eng.bos.redhat.com) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) ) #1 SMP Tue Oct 3 07:42:44 EDT 2017 0:mon> t [c000000ff38ffb80] c0000000002ddfac perf_pmu_migrate_context+0xac/0x470 [c000000ff38ffc40] c00000000011385c ppc_core_imc_cpu_offline+0x1ac/0x1e0 [c000000ff38ffc90] c000000000125758 cpuhp_invoke_callback+0x198/0x5d0 [c000000ff38ffd00] c00000000012782c cpuhp_thread_fun+0x8c/0x3d0 [c000000ff38ffd60] c0000000001678d0 smpboot_thread_fn+0x290/0x2a0 [c000000ff38ffdc0] c00000000015ee78 kthread+0x168/0x1b0 [c000000ff38ffe30] c00000000000b368 ret_from_kernel_thread+0x5c/0x74 While registering the cpuhoplug callbacks for core-imc, if we fails in the cpuhotplug online path for any random core (either because opal call to initialize the core-imc counters fails or because memory allocation fails for that core), ppc_core_imc_cpu_offline() will get invoked for other cpus who successfully returned from cpuhotplug online path. But in the ppc_core_imc_cpu_offline() path we are trying to migrate the event context, when core-imc counters are not even initialized. Thus creating the above stack dump. Add a check to see if core-imc counters are enabled or not in the cpuhotplug offline path before migrating the context to handle this failing scenario. Fixes: 885dcd709ba9 ("powerpc/perf: Add nest IMC PMU support") Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 02 November 2017, 22:38:05 UTC
5cb0512 Linus Torvalds 02 November 2017, 21:10:37 UTC Kbuild: don't pass "-C" to preprocessor when processing linker scripts For some odd historical reason, we preprocessed the linker scripts with "-C", which keeps comments around. That makes no sense, since the comments are not meaningful for the build anyway. And it actually breaks things, since linker scripts can't have C++ style "//" comments in them, so keeping comments after preprocessing now limits us in odd and surprising ways in our header files for no good reason. The -C option goes back to pre-git and pre-bitkeeper times, but seems to have been historically used (along with "-traditional") for some odd-ball architectures (ia64, MIPS and SH). It probably didn't matter back then either, but might possibly have been used to minimize the difference between the original file and the pre-processed result. The reason for this may be lost in time, but let's not perpetuate it only because we can't remember why we did this crazy thing. This was triggered by the recent addition of SPDX lines to the source tree, where people apparently were confused about why header files couldn't use the C++ comment format. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 November 2017, 21:10:37 UTC
890da9c Linus Torvalds 02 November 2017, 21:06:32 UTC Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"" This reverts commit 51204e0639c49ada02fd823782ad673b6326d748. There wasn't really any good reason for it, and people are complaining (rightly) that it broke existing practice. Cc: Len Brown <len.brown@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 November 2017, 21:06:32 UTC
6daa083 Linus Torvalds 02 November 2017, 19:01:26 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Check addr_limit in arm64 __dump_instr()" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: ensure __dump_instr() checks addr_limit 02 November 2017, 19:01:26 UTC
7a7003b Mark Rutland 02 November 2017, 16:12:03 UTC arm64: ensure __dump_instr() checks addr_limit It's possible for a user to deliberately trigger __dump_instr with a chosen kernel address. Let's avoid problems resulting from this by using get_user() rather than __get_user(), ensuring that we don't erroneously access kernel memory. Where we use __dump_instr() on kernel text, we already switch to KERNEL_DS, so this shouldn't adversely affect those cases. Fixes: 60ffc30d5652810d ("arm64: Exception handling") Cc: stable@vger.kernel.org Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 02 November 2017, 18:33:08 UTC
ead7515 Linus Torvalds 02 November 2017, 17:04:46 UTC Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license 02 November 2017, 17:04:46 UTC
fdebad1 Linus Torvalds 02 November 2017, 16:33:23 UTC Merge tag 'linux-kselftest-4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fix from Shuah Khan: "This consists of a single fix to a regression to printing individual test results to the console. An earlier commit changed it to printing just the summary of results, which will negatively impact users that rely on console log to look at the individual test failures. This fix makes it optional to print summary and by default results get printed to the console" * tag 'linux-kselftest-4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: lib.mk: print individual test results to console by default 02 November 2017, 16:33:23 UTC
0f07e10 Linus Torvalds 02 November 2017, 14:45:48 UTC Merge tag 'sound-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Unfortunately we still have received a significant amount of changes at the late stage, but at least all are small and clear fixes. There are two fixes for ALSA core stuff, yet another timer race fix and sequencer lockdep annotation fix. Both are spotted by syzkaller, and not too serious but better to paper over quickly. All other commits are about ASoC drivers, most notably, a revert of RT5514 hotword control that was included in 4.14-rc (due to a kind of abuse of kctl TLV ABI), together with topology API fixes and other device-specific small fixes that should go for stable, too" * tag 'sound-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: seq: Fix nested rwsem annotation for lockdep splat ALSA: timer: Add missing mutex lock for compat ioctls ASoC: rt5616: fix 0x91 default value ASoC: rt5659: connect LOUT Amp with Charge Pump ASoC: rt5659: register power bit of LOUT Amp ASoC: rt5663: Change the dev getting function in rt5663_irq ASoC: rt5514: Revert Hotword Model control ASoC: topology: Fix a potential memory leak in 'soc_tplg_dapm_widget_denum_create()' ASoC: topology: Fix a potential NULL pointer dereference in 'soc_tplg_dapm_widget_denum_create()' ASoC: rt5514-spi: check irq status to schedule data copy ASoC: adau17x1: Workaround for noise bug in ADC 02 November 2017, 14:45:48 UTC
6965f1a Linus Torvalds 02 November 2017, 14:43:40 UTC Merge branch 'fixes-v4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull key handling fixes from James Morris: "Fixes for the Keys subsystem by Eric Biggers" * 'fixes-v4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: fix out-of-bounds read during ASN.1 parsing KEYS: trusted: fix writing past end of buffer in trusted_read() KEYS: return full count in keyring_read() if buffer is too small 02 November 2017, 14:43:40 UTC
e78c38f Jiri Slaby 23 October 2017, 11:41:51 UTC futex: futex_wake_op, do not fail on invalid op In commit 30d6e0a4190d ("futex: Remove duplicated code and fix undefined behaviour"), I let FUTEX_WAKE_OP to fail on invalid op. Namely when op should be considered as shift and the shift is out of range (< 0 or > 31). But strace's test suite does this madness: futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xa0caffee); futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xbadfaced); futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xffffffff); When I pick the first 0xa0caffee, it decodes as: 0x80000000 & 0xa0caffee: oparg is shift 0x70000000 & 0xa0caffee: op is FUTEX_OP_OR 0x0f000000 & 0xa0caffee: cmp is FUTEX_OP_CMP_EQ 0x00fff000 & 0xa0caffee: oparg is sign-extended 0xcaf = -849 0x00000fff & 0xa0caffee: cmparg is sign-extended 0xfee = -18 That means the op tries to do this: (futex |= (1 << (-849))) == -18 which is completely bogus. The new check of op in the code is: if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) { if (oparg < 0 || oparg > 31) return -EINVAL; oparg = 1 << oparg; } which results obviously in the "Invalid argument" errno: FAIL: futex =========== futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xa0caffee) = -1: Invalid argument futex.test: failed test: ../futex failed with code 1 So let us soften the failure to print only a (ratelimited) message, crop the value and continue as if it were right. When userspace keeps up, we can switch this to return -EINVAL again. [v2] Do not return 0 immediatelly, proceed with the cropped value. Fixes: 30d6e0a4190d ("futex: Remove duplicated code and fix undefined behaviour") Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 November 2017, 14:41:50 UTC
e2be04c Greg Kroah-Hartman 01 November 2017, 14:09:13 UTC License cleanup: add SPDX license identifier to uapi header files with a license Many user space API headers have licensing information, which is either incomplete, badly formatted or just a shorthand for referring to the license under which the file is supposed to be. This makes it hard for compliance tools to determine the correct license. Update these files with an SPDX license identifier. The identifier was chosen based on the license information in the file. GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license identifier with the added 'WITH Linux-syscall-note' exception, which is the officially assigned exception identifier for the kernel syscall exception: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". This exception makes it possible to include GPL headers into non GPL code, without confusing license compliance tools. Headers which have either explicit dual licensing or are just licensed under a non GPL license are updated with the corresponding SPDX identifier and the GPLv2 with syscall exception identifier. The format is: ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE) SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. The update does not remove existing license information as this has to be done on a case by case basis and the copyright holders might have to be consulted. This will happen in a separate step. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 02 November 2017, 10:20:11 UTC
6f52b16 Greg Kroah-Hartman 01 November 2017, 14:08:43 UTC License cleanup: add SPDX license identifier to uapi header files with no license Many user space API headers are missing licensing information, which makes it hard for compliance tools to determine the correct license. By default are files without license information under the default license of the kernel, which is GPLV2. Marking them GPLV2 would exclude them from being included in non GPLV2 code, which is obviously not intended. The user space API headers fall under the syscall exception which is in the kernels COPYING file: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". otherwise syscall usage would not be possible. Update the files which contain no license information with an SPDX license identifier. The chosen identifier is 'GPL-2.0 WITH Linux-syscall-note' which is the officially assigned identifier for the Linux syscall exception. SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 02 November 2017, 10:19:54 UTC
b244131 Greg Kroah-Hartman 01 November 2017, 14:07:57 UTC License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 02 November 2017, 10:10:55 UTC
2eb9eab Eric Biggers 02 November 2017, 00:47:19 UTC KEYS: fix out-of-bounds read during ASN.1 parsing syzkaller with KASAN reported an out-of-bounds read in asn1_ber_decoder(). It can be reproduced by the following command, assuming CONFIG_X509_CERTIFICATE_PARSER=y and CONFIG_KASAN=y: keyctl add asymmetric desc $'\x30\x30' @s The bug is that the length of an ASN.1 data value isn't validated in the case where it is encoded using the short form, causing the decoder to read past the end of the input buffer. Fix it by validating the length. The bug report was: BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x10cb/0x1730 lib/asn1_decoder.c:233 Read of size 1 at addr ffff88003cccfa02 by task syz-executor0/6818 CPU: 1 PID: 6818 Comm: syz-executor0 Not tainted 4.14.0-rc7-00008-g5f479447d983 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0xb3/0x10b lib/dump_stack.c:52 print_address_description+0x79/0x2a0 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x236/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:427 asn1_ber_decoder+0x10cb/0x1730 lib/asn1_decoder.c:233 x509_cert_parse+0x1db/0x650 crypto/asymmetric_keys/x509_cert_parser.c:89 x509_key_preparse+0x64/0x7a0 crypto/asymmetric_keys/x509_public_key.c:174 asymmetric_key_preparse+0xcb/0x1a0 crypto/asymmetric_keys/asymmetric_type.c:388 key_create_or_update+0x347/0xb20 security/keys/key.c:855 SYSC_add_key security/keys/keyctl.c:122 [inline] SyS_add_key+0x1cd/0x340 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x447c89 RSP: 002b:00007fca7a5d3bd8 EFLAGS: 00000246 ORIG_RAX: 00000000000000f8 RAX: ffffffffffffffda RBX: 00007fca7a5d46cc RCX: 0000000000447c89 RDX: 0000000020006f4a RSI: 0000000020006000 RDI: 0000000020001ff5 RBP: 0000000000000046 R08: fffffffffffffffd R09: 0000000000000000 R10: 0000000000000002 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007fca7a5d49c0 R15: 00007fca7a5d4700 Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder") Cc: <stable@vger.kernel.org> # v3.7+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com> 02 November 2017, 09:58:08 UTC
a3c812f Eric Biggers 02 November 2017, 00:47:12 UTC KEYS: trusted: fix writing past end of buffer in trusted_read() When calling keyctl_read() on a key of type "trusted", if the user-supplied buffer was too small, the kernel ignored the buffer length and just wrote past the end of the buffer, potentially corrupting userspace memory. Fix it by instead returning the size required, as per the documentation for keyctl_read(). We also don't even fill the buffer at all in this case, as this is slightly easier to implement than doing a short read, and either behavior appears to be permitted. It also makes it match the behavior of the "encrypted" key type. Fixes: d00a1c72f7f4 ("keys: add new trusted key-type") Reported-by: Ben Hutchings <ben@decadent.org.uk> Cc: <stable@vger.kernel.org> # v2.6.38+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Signed-off-by: James Morris <james.l.morris@oracle.com> 02 November 2017, 09:58:07 UTC
3239b6f Eric Biggers 02 November 2017, 00:47:03 UTC KEYS: return full count in keyring_read() if buffer is too small Commit e645016abc80 ("KEYS: fix writing past end of user-supplied buffer in keyring_read()") made keyring_read() stop corrupting userspace memory when the user-supplied buffer is too small. However it also made the return value in that case be the short buffer size rather than the size required, yet keyctl_read() is actually documented to return the size required. Therefore, switch it over to the documented behavior. Note that for now we continue to have it fill the short buffer, since it did that before (pre-v3.13) and dump_key_tree_aux() in keyutils arguably relies on it. Fixes: e645016abc80 ("KEYS: fix writing past end of user-supplied buffer in keyring_read()") Reported-by: Ben Hutchings <ben@decadent.org.uk> Cc: <stable@vger.kernel.org> # v3.13+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Signed-off-by: James Morris <james.l.morris@oracle.com> 02 November 2017, 09:58:05 UTC
74784da David S. Miller 02 November 2017, 07:52:41 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains two one-liner fixes for your net tree, they are: 1) Disable fast hash operations for 2-bytes length keys which is leading to incorrect lookups in nf_tables, from Anatole Denis. 2) Reload pointer ipv4 header after ip_route_me_harder() given this may result in use-after-free due to skbuff header reallocation, patch from Tejaswi Tanikella. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 02 November 2017, 07:52:41 UTC
18129a2 Jeff Barnhill 01 November 2017, 14:58:09 UTC net: vrf: correct FRA_L3MDEV encode type FRA_L3MDEV is defined as U8, but is being added as a U32 attribute. On big endian architecture, this results in the l3mdev entry not being added to the FIB rules. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 November 2017, 07:20:53 UTC
4eebff2 Konstantin Khlebnikov 01 November 2017, 13:32:15 UTC tcp_nv: fix division by zero in tcpnv_acked() Average RTT could become zero. This happened in real life at least twice. This patch treats zero as 1us. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Lawrence Brakmo <Brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 November 2017, 07:16:27 UTC
9cc0696 Dave Airlie 02 November 2017, 04:40:12 UTC Merge branch 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux into drm-fixes Just two small patches for stable to fix the driver failing to load on polaris cards with harvested VCE or UVD blocks. * 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: allow harvesting check for Polaris VCE drm/amdgpu: return -ENOENT from uvd 6.0 early init for harvesting 02 November 2017, 04:40:12 UTC
32bec2a Leo Liu 01 November 2017, 01:12:35 UTC drm/amdgpu: allow harvesting check for Polaris VCE Fixes init failures on Polaris cards with harvested VCE blocks. Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 02 November 2017, 03:37:16 UTC
cb4b02d Leo Liu 01 November 2017, 01:03:39 UTC drm/amdgpu: return -ENOENT from uvd 6.0 early init for harvesting Fixes init failures on polaris cards with harvested UVD. Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 02 November 2017, 03:37:00 UTC
96ffbbf Dave Airlie 02 November 2017, 01:33:57 UTC Merge tag 'drm-intel-fixes-2017-11-01' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Fixes for Stable: - Fix KBL Blank Screen (Jani) - Fix FIFO Underrun on SNB (Maarten) Other fixes: - Fix GPU Hang on i915gm (Chris) - Fix gem_tiled_pread_pwrite IGT case (Chris) - Cancel modeset retry work during modeset clean-up (Manasi) * tag 'drm-intel-fixes-2017-11-01' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Check incoming alignment for unfenced buffers (on i915gm) drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr) drm/i915: Hold rcu_read_lock when iterating over the radixtree (objects) drm/i915/edp: read edp display control registers unconditionally drm/i915: Do not rely on wm preservation for ILK watermarks drm/i915: Cancel the modeset retry work during modeset cleanup 02 November 2017, 01:33:57 UTC
3a99df9 Linus Torvalds 01 November 2017, 23:04:27 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull signal bugfix from Eric Biederman: "When making the generic support for SIGEMT conditional on the presence of SIGEMT I made a typo that causes it to fail to activate. It was noticed comparatively quickly but the bug report just made it to me today" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Fix name of SIGEMT in #if defined() check 01 November 2017, 23:04:27 UTC
c3aff08 Andrew Clayton 01 November 2017, 15:49:59 UTC signal: Fix name of SIGEMT in #if defined() check Commit cc731525f26a ("signal: Remove kernel interal si_code magic") added a check for SIGMET and NSIGEMT being defined. That SIGMET should in fact be SIGEMT, with SIGEMT being defined in arch/{alpha,mips,sparc}/include/uapi/asm/signal.h This was actually pointed out by BenHutchings in a lwn.net comment here https://lwn.net/Comments/734608/ Fixes: cc731525f26a ("signal: Remove kernel interal si_code magic") Signed-off-by: Andrew Clayton <andrew@digital-domain.net> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> 01 November 2017, 22:04:57 UTC
1cc1570 Linus Torvalds 01 November 2017, 21:46:38 UTC Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "A few fixes that should go into this series: - Regression fix for ide-cd, ensuring that a request is fully initialized. From Hongxu. - Ditto fix for virtio_blk, from Bart. - NVMe fix from Keith, ensuring that we set the right block size on revalidation. If the block size changed, we'd be in trouble without it. - NVMe rdma fix from Sagi, fixing a potential hang while the controller is being removed" * 'for-linus' of git://git.kernel.dk/linux-block: ide:ide-cd: fix kernel panic resulting from missing scsi_req_init nvme: Fix setting logical block format when revalidating virtio_blk: Fix an SG_IO regression nvme-rdma: fix possible hang when issuing commands during ctrl removal 01 November 2017, 21:46:38 UTC
bb5cf33 Chris Wilson 31 October 2017, 10:36:07 UTC drm/i915: Check incoming alignment for unfenced buffers (on i915gm) In case the object has changed tiling between calls to execbuf, we need to check if the existing offset inside the GTT matches the new tiling constraint. We even need to do this for "unfenced" tiled objects, where the 3D commands use an implied fence and so the object still needs to match the physical fence restrictions on alignment (only required for gen2 and early gen3). In commit 2889caa92321 ("drm/i915: Eliminate lots of iterations over the execobjects array"), the idea was to remove the second guessing and only set the NEEDS_MAP flag when required. However, the entire check for an unusable offset for fencing was removed and not just the secondary check. I.e. /* avoid costly ping-pong once a batch bo ended up non-mappable */ if (entry->flags & __EXEC_OBJECT_NEEDS_MAP && !i915_vma_is_map_and_fenceable(vma)) return !only_mappable_for_reloc(entry->flags); was entirely removed as the ping-pong between execbuf passes was fixed, but its primary purpose in forcing unaligned unfenced access to be rebound was forgotten. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103502 Fixes: 2889caa92321 ("drm/i915: Eliminate lots of iterations over the execobjects array") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171031103607.17836-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 1d033beb20d6d5885587a02a393b6598d766a382) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> 01 November 2017, 17:28:28 UTC
a53a0ab Takashi Iwai 01 November 2017, 16:43:20 UTC Merge tag 'asoc-fix-v4.14-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.14 A bunch of fixes here, mostly device specific ones (the biggest one being the revert of the hotword support for rt5514), with a couple of core fixes for potential issues with corrupted or otherwise invalid topology files. 01 November 2017, 16:43:20 UTC
4f2ba5d Linus Torvalds 01 November 2017, 15:29:01 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix refcounting in xfrm_bundle_lookup() when using a dummy bundle, from Steffen Klassert. 2) Fix crypto header handling in rx data frames in ath10k driver, from Vasanthakumar Thiagarajan. 3) Fix use after free of qdisc when we defer tcp_chain_flush() to a workqueue. From Cong Wang. 4) Fix double free in lapbether driver, from Pan Bian. 5) Sanitize TUNSETSNDBUF values, from Craig Gallek. 6) Fix refcounting when addrconf_permanent_addr() calls ipv6_del_addr(). From Eric Dumazet. 7) Fix MTU probing bug in TCP that goes back to 2007, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tcp: fix tcp_mtu_probe() vs highest_sack ipv6: addrconf: increment ifp refcount before ipv6_del_addr() tun/tap: sanitize TUNSETSNDBUF input mlxsw: i2c: Fix buffer increment counter for write transaction mlxsw: reg: Add high and low temperature thresholds MAINTAINERS: Remove Yotam from mlxfw MAINTAINERS: Update Yotam's E-mail net: hns: set correct return value net: lapbether: fix double free bpf: remove SK_REDIRECT from UAPI net: phy: marvell: Only configure RGMII delays when using RGMII xfrm: Fix GSO for IPsec with GRE tunnel. tc-testing: fix arg to ip command: -s -> -n net_sched: remove tcf_block_put_deferred() l2tp: hold tunnel in pppol2tp_connect() Revert "ath10k: fix napi_poll budget overflow" ath10k: rebuild crypto header in rx data frames wcn36xx: Remove unnecessary rcu_read_unlock in wcn36xx_bss_info_changed xfrm: Clear sk_dst_cache when applying per-socket policy. xfrm: Fix xfrm_dst_cache memleak 01 November 2017, 15:29:01 UTC
cb0631f Vlastimil Babka 01 November 2017, 07:21:25 UTC x86/mm: fix use-after-free of vma during userfaultfd fault Syzkaller with KASAN has reported a use-after-free of vma->vm_flags in __do_page_fault() with the following reproducer: mmap(&(0x7f0000000000/0xfff000)=nil, 0xfff000, 0x3, 0x32, 0xffffffffffffffff, 0x0) mmap(&(0x7f0000011000/0x3000)=nil, 0x3000, 0x1, 0x32, 0xffffffffffffffff, 0x0) r0 = userfaultfd(0x0) ioctl$UFFDIO_API(r0, 0xc018aa3f, &(0x7f0000002000-0x18)={0xaa, 0x0, 0x0}) ioctl$UFFDIO_REGISTER(r0, 0xc020aa00, &(0x7f0000019000)={{&(0x7f0000012000/0x2000)=nil, 0x2000}, 0x1, 0x0}) r1 = gettid() syz_open_dev$evdev(&(0x7f0000013000-0x12)="2f6465762f696e7075742f6576656e742300", 0x0, 0x0) tkill(r1, 0x7) The vma should be pinned by mmap_sem, but handle_userfault() might (in a return to userspace scenario) release it and then acquire again, so when we return to __do_page_fault() (with other result than VM_FAULT_RETRY), the vma might be gone. Specifically, per Andrea the scenario is "A return to userland to repeat the page fault later with a VM_FAULT_NOPAGE retval (potentially after handling any pending signal during the return to userland). The return to userland is identified whenever FAULT_FLAG_USER|FAULT_FLAG_KILLABLE are both set in vmf->flags" However, since commit a3c4fb7c9c2e ("x86/mm: Fix fault error path using unsafe vma pointer") there is a vma_pkey() read of vma->vm_flags after that point, which can thus become use-after-free. Fix this by moving the read before calling handle_mm_fault(). Reported-by: syzbot <bot+6a5269ce759a7bb12754ed9622076dc93f65a1f6@syzkaller.appspotmail.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Fixes: 3c4fb7c9c2e ("x86/mm: Fix fault error path using unsafe vma pointer") Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 November 2017, 15:09:58 UTC
89db69d Linus Torvalds 01 November 2017, 14:59:39 UTC Merge tag 'smb3-file-name-too-long-fix' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fix from Steve French: "smb3 file name too long fix" * tag 'smb3-file-name-too-long-fix' of git://git.samba.org/sfrench/cifs-2.6: cifs: check MaxPathNameComponentLength != 0 before using it 01 November 2017, 14:59:39 UTC
79d7334 Hongxu Jia 31 October 2017, 07:39:40 UTC ide:ide-cd: fix kernel panic resulting from missing scsi_req_init Since we split the scsi_request out of struct request, while the standard prep_rq_fn builds 10 byte cmds, it missed to invoke scsi_req_init() to initialize certain fields of a scsi_request structure (.__cmd[], .cmd, .cmd_len and .sense_len but no other members of struct scsi_request). An example panic on virtual machines (qemu/virtualbox) to boot from IDE cdrom: ... [ 8.754381] Call Trace: [ 8.755419] blk_peek_request+0x182/0x2e0 [ 8.755863] blk_fetch_request+0x1c/0x40 [ 8.756148] ? ktime_get+0x40/0xa0 [ 8.756385] do_ide_request+0x37d/0x660 [ 8.756704] ? cfq_group_service_tree_add+0x98/0xc0 [ 8.757011] ? cfq_service_tree_add+0x1e5/0x2c0 [ 8.757313] ? ktime_get+0x40/0xa0 [ 8.757544] __blk_run_queue+0x3d/0x60 [ 8.757837] queue_unplugged+0x2f/0xc0 [ 8.758088] blk_flush_plug_list+0x1f4/0x240 [ 8.758362] blk_finish_plug+0x2c/0x40 ... [ 8.770906] RIP: ide_cdrom_prep_fn+0x63/0x180 RSP: ffff92aec018bae8 [ 8.772329] ---[ end trace 6408481e551a85c9 ]--- ... Fixes: 82ed4db499b8 ("block: split scsi_request out of struct request") Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 01 November 2017, 14:21:58 UTC
9d9491a Douglas Anderson 12 October 2017, 20:11:17 UTC mmc: dw_mmc: Fix the DTO timeout calculation Just like the CTO timeout calculation introduced recently, the DTO timeout calculation was incorrect. It used "bus_hz" but, as far as I can tell, it's supposed to use the card clock. Let's account for the div value, which is documented as 2x the value stored in the register, or 1 if the register is 0. NOTE: This was likely not terribly important until commit 16a34574c6ca ("mmc: dw_mmc: remove the quirks flags") landed because "DIV" is documented on Rockchip SoCs (the ones that used to define the quirk) to always be 0 or 1. ...and, in fact, it's documented to only be 1 with EMMC in 8-bit DDR52 mode. Thus before the quirk was applied to everyone it was mostly OK to ignore the DIV value. I haven't personally observed any problems that are fixed by this patch but I also haven't tested this anywhere with a DIV other an 0. AKA: this problem was found simply by code inspection and I have no failing test cases that are fixed by it. Presumably this could fix real bugs for someone out there, though. Fixes: 16a34574c6ca ("mmc: dw_mmc: remove the quirks flags") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 01 November 2017, 14:13:45 UTC
b817d93 Mark Brown 01 November 2017, 13:36:16 UTC Merge remote-tracking branches 'asoc/fix/topology', 'asoc/fix/adau17x1', 'asoc/fix/rt5514', 'asoc/fix/rt5616', 'asoc/fix/rt5659' and 'asoc/fix/rt5663' into tmp 01 November 2017, 13:36:16 UTC
2b7cda9 Eric Dumazet 31 October 2017, 06:08:20 UTC tcp: fix tcp_mtu_probe() vs highest_sack Based on SNMP values provided by Roman, Yuchung made the observation that some crashes in tcp_sacktag_walk() might be caused by MTU probing. Looking at tcp_mtu_probe(), I found that when a new skb was placed in front of the write queue, we were not updating tcp highest sack. If one skb is freed because all its content was copied to the new skb (for MTU probing), then tp->highest_sack could point to a now freed skb. Bad things would then happen, including infinite loops. This patch renames tcp_highest_sack_combine() and uses it from tcp_mtu_probe() to fix the bug. Note that I also removed one test against tp->sacked_out, since we want to replace tp->highest_sack regardless of whatever condition, since keeping a stale pointer to freed skb is a recipe for disaster. Fixes: a47e5a988a57 ("[TCP]: Convert highest_sack to sk_buff to allow direct access") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Reported-by: Roman Gushchin <guro@fb.com> Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 November 2017, 12:18:34 UTC
e669b86 Eric Dumazet 31 October 2017, 05:47:09 UTC ipv6: addrconf: increment ifp refcount before ipv6_del_addr() In the (unlikely) event fixup_permanent_addr() returns a failure, addrconf_permanent_addr() calls ipv6_del_addr() without the mandatory call to in6_ifa_hold(), leading to a refcount error, spotted by syzkaller : WARNING: CPU: 1 PID: 3142 at lib/refcount.c:227 refcount_dec+0x4c/0x50 lib/refcount.c:227 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 3142 Comm: ip Not tainted 4.14.0-rc4-next-20171009+ #33 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:181 __warn+0x1c4/0x1e0 kernel/panic.c:544 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:178 do_trap_no_signal arch/x86/kernel/traps.c:212 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:261 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:298 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:311 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:refcount_dec+0x4c/0x50 lib/refcount.c:227 RSP: 0018:ffff8801ca49e680 EFLAGS: 00010286 RAX: 000000000000002c RBX: ffff8801d07cfcdc RCX: 0000000000000000 RDX: 000000000000002c RSI: 1ffff10039493c90 RDI: ffffed0039493cc4 RBP: ffff8801ca49e688 R08: ffff8801ca49dd70 R09: 0000000000000000 R10: ffff8801ca49df58 R11: 0000000000000000 R12: 1ffff10039493cd9 R13: ffff8801ca49e6e8 R14: ffff8801ca49e7e8 R15: ffff8801d07cfcdc __in6_ifa_put include/net/addrconf.h:369 [inline] ipv6_del_addr+0x42b/0xb60 net/ipv6/addrconf.c:1208 addrconf_permanent_addr net/ipv6/addrconf.c:3327 [inline] addrconf_notify+0x1c66/0x2190 net/ipv6/addrconf.c:3393 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x32/0x60 net/core/dev.c:1697 call_netdevice_notifiers net/core/dev.c:1715 [inline] __dev_notify_flags+0x15d/0x430 net/core/dev.c:6843 dev_change_flags+0xf5/0x140 net/core/dev.c:6879 do_setlink+0xa1b/0x38e0 net/core/rtnetlink.c:2113 rtnl_newlink+0xf0d/0x1a40 net/core/rtnetlink.c:2661 rtnetlink_rcv_msg+0x733/0x1090 net/core/rtnetlink.c:4301 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2408 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4313 netlink_unicast_kernel net/netlink/af_netlink.c:1273 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1299 netlink_sendmsg+0xa4a/0xe70 net/netlink/af_netlink.c:1862 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x75b/0x8a0 net/socket.c:2049 __sys_sendmsg+0xe5/0x210 net/socket.c:2083 SYSC_sendmsg net/socket.c:2094 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2090 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7fa9174d3320 RSP: 002b:00007ffe302ae9e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffe302b2ae0 RCX: 00007fa9174d3320 RDX: 0000000000000000 RSI: 00007ffe302aea20 RDI: 0000000000000016 RBP: 0000000000000082 R08: 0000000000000000 R09: 000000000000000f R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe302b32a0 R13: 0000000000000000 R14: 00007ffe302b2ab8 R15: 00007ffe302b32b8 Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Ahern <dsahern@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 November 2017, 12:18:13 UTC
9316192 Craig Gallek 30 October 2017, 22:50:11 UTC tun/tap: sanitize TUNSETSNDBUF input Syzkaller found several variants of the lockup below by setting negative values with the TUNSETSNDBUF ioctl. This patch adds a sanity check to both the tun and tap versions of this ioctl. watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [repro:2389] Modules linked in: irq event stamp: 329692056 hardirqs last enabled at (329692055): [<ffffffff824b8381>] _raw_spin_unlock_irqrestore+0x31/0x75 hardirqs last disabled at (329692056): [<ffffffff824b9e58>] apic_timer_interrupt+0x98/0xb0 softirqs last enabled at (35659740): [<ffffffff824bc958>] __do_softirq+0x328/0x48c softirqs last disabled at (35659731): [<ffffffff811c796c>] irq_exit+0xbc/0xd0 CPU: 0 PID: 2389 Comm: repro Not tainted 4.14.0-rc7 #23 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880009452140 task.stack: ffff880006a20000 RIP: 0010:_raw_spin_lock_irqsave+0x11/0x80 RSP: 0018:ffff880006a27c50 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff10 RAX: ffff880009ac68d0 RBX: ffff880006a27ce0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff880006a27ce0 RDI: ffff880009ac6900 RBP: ffff880006a27c60 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 000000000063ff00 R12: ffff880009ac6900 R13: ffff880006a27cf8 R14: 0000000000000001 R15: ffff880006a27cf8 FS: 00007f4be4838700(0000) GS:ffff88000cc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020101000 CR3: 0000000009616000 CR4: 00000000000006f0 Call Trace: prepare_to_wait+0x26/0xc0 sock_alloc_send_pskb+0x14e/0x270 ? remove_wait_queue+0x60/0x60 tun_get_user+0x2cc/0x19d0 ? __tun_get+0x60/0x1b0 tun_chr_write_iter+0x57/0x86 __vfs_write+0x156/0x1e0 vfs_write+0xf7/0x230 SyS_write+0x57/0xd0 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7f4be4356df9 RSP: 002b:00007ffc18101c08 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4be4356df9 RDX: 0000000000000046 RSI: 0000000020101000 RDI: 0000000000000005 RBP: 00007ffc18101c40 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000293 R12: 0000559c75f64780 R13: 00007ffc18101d30 R14: 0000000000000000 R15: 0000000000000000 Fixes: 33dccbb050bb ("tun: Limit amount of queued packets per device") Fixes: 20d29d7a916a ("net: macvtap driver") Signed-off-by: Craig Gallek <kraig@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 November 2017, 11:52:36 UTC
d70eaa3 Vadim Pasternak 01 November 2017, 11:10:42 UTC mlxsw: i2c: Fix buffer increment counter for write transaction It fixes a problem for the last chunk where 'chunk_size' is smaller than MLXSW_I2C_BLK_MAX and data is copied to the wrong offset, overriding previous data. Fixes: 6882b0aee180 ("mlxsw: Introduce support for I2C bus") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 November 2017, 11:40:58 UTC
7400bb4 Tejaswi Tanikella 23 October 2017, 06:16:03 UTC netfilter: nf_reject_ipv4: Fix use-after-free in send_reset niph is not updated after pskb_expand_head changes the skb head. It still points to the freed data, which is then used to update tot_len and checksum. This could cause use-after-free poison crash. Update niph, if ip_route_me_harder does not fail. This only affects the interaction with REJECT targets and br_netfilter. Signed-off-by: Tejaswi Tanikella <tejaswit@codeaurora.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 01 November 2017, 11:15:29 UTC
122f00c David S. Miller 01 November 2017, 10:27:46 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2017-11-01 1) Fix a memleak when a packet matches a policy without a matching state. 2) Reset the socket cached dst_entry when inserting a socket policy, otherwise the policy might be ignored. From Jonathan Basseri. 3) Fix GSO for a IPsec, GRE tunnel combination. We reset the encapsulation field at the skb too erly, as a result GRE does not segment GSO packets. Fix this by resetting the the encapsulation field right before the transformation where the inner headers get invalid. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 01 November 2017, 10:27:46 UTC
e6c4dcb Naveen N. Rao 30 October 2017, 15:12:09 UTC powerpc/kprobes: Dereference function pointers only if the address does not belong to kernel text This makes the changes introduced in commit 83e840c770f2c5 ("powerpc64/elfv1: Only dereference function descriptor for non-text symbols") to be specific to the kprobe subsystem. We previously changed ppc_function_entry() to always check the provided address to confirm if it needed to be dereferenced. This is actually only an issue for kprobe blacklisted asm labels (through use of _ASM_NOKPROBE_SYMBOL) and can cause other issues with ftrace. Also, the additional checks are not really necessary for our other uses. As such, move this check to the kprobes subsystem. Fixes: 83e840c770f2 ("powerpc64/elfv1: Only dereference function descriptor for non-text symbols") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 01 November 2017, 04:51:03 UTC
63be1a8 Naveen N. Rao 30 October 2017, 15:12:08 UTC Revert "powerpc64/elfv1: Only dereference function descriptor for non-text symbols" This reverts commit 83e840c770f2c5 ("powerpc64/elfv1: Only dereference function descriptor for non-text symbols"). Chandan reported that on newer kernels, trying to enable function_graph tracer on ppc64 (BE) locks up the system with the following trace: Unable to handle kernel paging request for data at address 0x600000002fa30010 Faulting instruction address: 0xc0000000001f1300 Thread overran stack, or stack corrupted Oops: Kernel access of bad area, sig: 11 [#1] BE SMP NR_CPUS=2048 DEBUG_PAGEALLOC NUMA pSeries Modules linked in: CPU: 1 PID: 6586 Comm: bash Not tainted 4.14.0-rc3-00162-g6e51f1f-dirty #20 task: c000000625c07200 task.stack: c000000625c07310 NIP: c0000000001f1300 LR: c000000000121cac CTR: c000000000061af8 REGS: c000000625c088c0 TRAP: 0380 Not tainted (4.14.0-rc3-00162-g6e51f1f-dirty) MSR: 8000000000001032 <SF,ME,IR,DR,RI> CR: 28002848 XER: 00000000 CFAR: c0000000001f1320 SOFTE: 0 ... NIP [c0000000001f1300] .__is_insn_slot_addr+0x30/0x90 LR [c000000000121cac] .kernel_text_address+0x18c/0x1c0 Call Trace: [c000000625c08b40] [c0000000001bd040] .is_module_text_address+0x20/0x40 (unreliable) [c000000625c08bc0] [c000000000121cac] .kernel_text_address+0x18c/0x1c0 [c000000625c08c50] [c000000000061960] .prepare_ftrace_return+0x50/0x130 [c000000625c08cf0] [c000000000061b10] .ftrace_graph_caller+0x14/0x34 [c000000625c08d60] [c000000000121b40] .kernel_text_address+0x20/0x1c0 [c000000625c08df0] [c000000000061960] .prepare_ftrace_return+0x50/0x130 ... [c000000625c0ab30] [c000000000061960] .prepare_ftrace_return+0x50/0x130 [c000000625c0abd0] [c000000000061b10] .ftrace_graph_caller+0x14/0x34 [c000000625c0ac40] [c000000000121b40] .kernel_text_address+0x20/0x1c0 [c000000625c0acd0] [c000000000061960] .prepare_ftrace_return+0x50/0x130 [c000000625c0ad70] [c000000000061b10] .ftrace_graph_caller+0x14/0x34 [c000000625c0ade0] [c000000000121b40] .kernel_text_address+0x20/0x1c0 This is because ftrace is using ppc_function_entry() for obtaining the address of return_to_handler() in prepare_ftrace_return(). The call to kernel_text_address() itself gets traced and we end up in a recursive loop. Fixes: 83e840c770f2 ("powerpc64/elfv1: Only dereference function descriptor for non-text symbols") Cc: stable@vger.kernel.org # v4.13+ Reported-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 01 November 2017, 04:50:12 UTC
62b0e92 Ido Schimmel 30 October 2017, 09:51:18 UTC mlxsw: reg: Add high and low temperature thresholds The ASIC has the ability to generate events whenever a sensor indicates the temperature goes above or below its high or low thresholds, respectively. In new firmware versions the firmware enforces a minimum of 5 degrees Celsius difference between both thresholds. Make the driver conform to this requirement. Note that this is required even when the events are disabled, as in certain systems interrupts are generated via GPIO based on these thresholds. Fixes: 85926f877040 ("mlxsw: reg: Add definition of temperature management registers") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 November 2017, 03:25:43 UTC
1cf098b Yuval Mintz 30 October 2017, 09:41:37 UTC MAINTAINERS: Remove Yotam from mlxfw Provide a mailing list for maintenance of the module instead. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 November 2017, 03:19:03 UTC
f1fd20c Yotam Gigi 30 October 2017, 09:41:36 UTC MAINTAINERS: Update Yotam's E-mail For the time being I will be available in my private mail. Update both the MAINTAINERS file and the individual modules MODULE_AUTHOR directive with the new address. Signed-off-by: Yotam Gigi <yotam.gi@gmail.com> Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 November 2017, 03:19:03 UTC
d2083d0 Pan Bian 30 October 2017, 08:50:01 UTC net: hns: set correct return value The function of_parse_phandle() returns a NULL pointer if it cannot resolve a phandle property to a device_node pointer. In function hns_nic_dev_probe(), its return value is passed to PTR_ERR to extract the error code. However, in this case, the extracted error code will always be zero, which is unexpected. Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 01 November 2017, 03:17:44 UTC
7db8874 Pan Bian 29 October 2017, 13:57:22 UTC net: lapbether: fix double free The function netdev_priv() returns the private data of the device. The memory to store the private data is allocated in alloc_netdev() and is released in netdev_free(). Calling kfree() on the return value of netdev_priv() after netdev_free() results in a double free bug. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 November 2017, 03:11:02 UTC
04686ef John Fastabend 01 November 2017, 02:17:31 UTC bpf: remove SK_REDIRECT from UAPI Now that SK_REDIRECT is no longer a valid return code. Remove it from the UAPI completely. Then do a namespace remapping internal to sockmap so SK_REDIRECT is no longer externally visible. Patchs primary change is to do a namechange from SK_REDIRECT to __SK_REDIRECT Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 November 2017, 02:43:50 UTC
14fc0ab Andrew Lunn 31 October 2017, 19:31:28 UTC net: phy: marvell: Only configure RGMII delays when using RGMII The fix 5987feb38aa5 ("net: phy: marvell: logical vs bitwise OR typo") uncovered another bug in the Marvell PHY driver, which broke the Marvell OpenRD platform. It relies on the bootloader configuring the RGMII delays and does not specify a phy-mode in its device tree. The PHY driver should only configure RGMII delays if the phy mode indicates it is using RGMII. Without anything in device tree, the mv643xx Ethernet driver defaults to GMII. Fixes: 5987feb38aa5 ("net: phy: marvell: logical vs bitwise OR typo") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 November 2017, 02:26:08 UTC
b34a264 David S. Miller 01 November 2017, 01:51:36 UTC Merge tag 'wireless-drivers-for-davem-2017-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.14 The most important here is the security vulnerabitility fix for ath10k. ath10k * fix security vulnerability with missing PN check on certain hardware * revert ath10k napi fix as it caused regressions on QCA6174 wcn36xx * remove unnecessary rcu_read_unlock() from error path ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 01 November 2017, 01:51:36 UTC
25dd1aa Dave Airlie 01 November 2017, 00:05:03 UTC Merge branch 'linux-4.14' of git://github.com/skeggsb/linux into drm-fixes single nouveau regression fix. * 'linux-4.14' of git://github.com/skeggsb/linux: drm/nouveau/kms/nv50: use the correct state for base channel notifier setup 01 November 2017, 00:05:03 UTC
d324c5b Ben Skeggs 31 October 2017, 23:12:25 UTC drm/nouveau/kms/nv50: use the correct state for base channel notifier setup Fixes: 857263 ("drm/nouveau: Handle drm_atomic_helper_swap_state failure") Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Tested-by: Lyude Paul <lyude@redhat.com> Reviewed by: Lyude Paul <lyude@redhat.com> 31 October 2017, 23:18:33 UTC
7c404c6 Linus Torvalds 31 October 2017, 22:52:48 UTC Merge tag 'pm-reverts-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management commit reverts from Rafael Wysocki: "Since Geert reports additional problems with my PM QoS fix from the last week that have not been addressed by the most recent fixup on top of it, they both should better be reverted now and let's fix the original issue properly in 4.15. This reverts two recent PM QoS commits one of which introduced multiple problems and the other one fixed some, but not all of them (Rafael Wysocki)" * tag 'pm-reverts-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "PM / QoS: Fix device resume latency PM QoS" Revert "PM / QoS: Fix default runtime_pm device resume latency" 31 October 2017, 22:52:48 UTC
ea82daf Luc Van Oostenryck 31 October 2017, 17:22:23 UTC tile: pass machine size to sparse By default, sparse assumes a 64bit machine when compiled on x86-64 and 32bit when compiled on anything else. This can of course create all sort of problems, like issuing false warnings like: 'constant ... is so big it is unsigned long long' or 'shift too big (32) for type unsigned long' when the architecture is 64bit while sparse was compiled on a 32bit machine, or worse, to not emit legitimate warnings in the reverse situation. Fix this by passing to sparse the appropriate -m32/-m64 flag. To: Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> 31 October 2017, 20:54:03 UTC
a323335 Shuah Khan 30 October 2017, 23:42:43 UTC selftests: lib.mk: print individual test results to console by default Change run_tests to print individual test results to console by default. Introduce "summary" option to print individual test results to a file /tmp/test_name and just print the summary to the console. This change is necessary to support use-cases where test machines get rebooted once tests are run and the console log should contain the full results. In the following example, individual test results with "summary=1" option are written to /tmp/kcmp_test make --silent TARGETS=kcmp kselftest TAP version 13 selftests: kcmp_test ======================================== pid1: 30126 pid2: 30127 FD: 2 FILES: 2 VM: 1 FS: 2 SIGHAND: 2 IO: 0 SYSVSEM: 0 INV: -1 PASS: 0 returned as expected PASS: 0 returned as expected FAIL: 0 expected but -1 returned (Invalid argument) Pass 2 Fail 1 Xfail 0 Xpass 0 Skip 0 Error 0 1..3 Bail out! Pass 2 Fail 1 Xfail 0 Xpass 0 Skip 0 Error 0 1..3 Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 1..0 ok 1..1 selftests: kcmp_test [PASS] make --silent TARGETS=kcmp summary=1 kselftest TAP version 13 selftests: kcmp_test ======================================== ok 1..1 selftests: kcmp_test [PASS] Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> 31 October 2017, 19:24:00 UTC
287683d Leon Romanovsky 31 October 2017, 18:09:54 UTC RDMA/nldev: Enforce device index check for port callback IB device index is nldev's handler and it should be checked always. Fixes: c3f66f7b0052 ("RDMA/netlink: Implement nldev port doit callback") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Doug Ledford <dledford@redhat.com> [ Applying directly, since Doug fried his SSD's and is rebuilding - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 31 October 2017, 19:12:55 UTC
d5919dc Rafael J. Wysocki 31 October 2017, 17:26:15 UTC Revert "PM / QoS: Fix device resume latency PM QoS" This reverts commit 0cc2b4e5a020 (PM / QoS: Fix device resume latency PM QoS) as it introduced regressions on multiple systems and the fix-up in commit 2a9a86d5c813 (PM / QoS: Fix default runtime_pm device resume latency) does not address all of them. The original problem that commit 0cc2b4e5a020 was attempting to fix will be addressed later. Fixes: 0cc2b4e5a020 (PM / QoS: Fix device resume latency PM QoS) Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 31 October 2017, 17:35:40 UTC
5ba2572 Rafael J. Wysocki 31 October 2017, 17:24:38 UTC Revert "PM / QoS: Fix default runtime_pm device resume latency" This reverts commit 2a9a86d5c813 (PM / QoS: Fix default runtime_pm device resume latency) as the commit it depends on is going to be reverted. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 31 October 2017, 17:24:38 UTC
c29f56b Kalle Valo 31 October 2017, 14:26:48 UTC Merge ath-current from ath.git ath.git fixes for 4.14. Major changes: ath10k * fix security vulnerability with missing PN check on certain hardware * revert ath10k napi fix as it caused regressions on QCA6174 wcn36xx * remove unnecessary rcu_read_unlock() from error path 31 October 2017, 14:26:48 UTC
e2532b4 Douglas Miller 20 October 2017, 13:17:22 UTC scsi: qla2xxx: Fix oops in qla2x00_probe_one error path On error, kthread_create() returns an errno-encoded pointer, not NULL. The routine qla2x00_probe_one() detects the error case and jumps to probe_failed, but has already assigned the return value from kthread_create() to ha->dpc_thread. Then probe_failed checks to see if ha->dpc_thread is not NULL before doing cleanup on it. Since in the error case this is also not NULL, it ends up trying to access an invalid task pointer. Solution is to assign NULL to ha->dpc_thread in the error path to avoid kthread cleanup in that case. Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 31 October 2017, 12:06:07 UTC
73b9fc4 Steffen Klassert 30 October 2017, 09:04:04 UTC xfrm: Fix GSO for IPsec with GRE tunnel. We reset the encapsulation field of the skb too early in xfrm_output. As a result, the GRE GSO handler does not segment the packets. This leads to a performance drop down. We fix this by resetting the encapsulation field right before we do the transformation, when the inner headers become invalid. Fixes: f1bd7d659ef0 ("xfrm: Add encapsulation header offsets while SKB is not encrypted") Reported-by: Vicente De Luca <vdeluca@zendesk.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> 31 October 2017, 08:20:35 UTC
1f20f9f Takashi Iwai 29 October 2017, 10:10:43 UTC ALSA: seq: Fix nested rwsem annotation for lockdep splat syzkaller reported the lockdep splat due to the possible deadlock of grp->list_mutex of each sequencer client object. Actually this is rather a false-positive report due to the missing nested lock annotations. The sequencer client may deliver the event directly to another client which takes another own lock. For addressing this issue, this patch replaces the simple down_read() with down_read_nested(). As a lock subclass, the already existing "hop" can be re-used, which indicates the depth of the call. Reference: http://lkml.kernel.org/r/089e082686ac9b482e055c832617@google.com Reported-by: syzbot <bot+7feb8de6b4d6bf810cf098bef942cc387e79d0ad@syzkaller.appspotmail.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 31 October 2017, 08:09:10 UTC
79fb051 Takashi Iwai 29 October 2017, 10:02:04 UTC ALSA: timer: Add missing mutex lock for compat ioctls The races among ioctl and other operations were protected by the commit af368027a49a ("ALSA: timer: Fix race among timer ioctls") and later fixes, but one code path was forgotten in the scenario: the 32bit compat ioctl. As syzkaller recently spotted, a very similar use-after-free may happen with the combination of compat ioctls. The fix is simply to apply the same ioctl_lock to the compat_ioctl callback, too. Fixes: af368027a49a ("ALSA: timer: Fix race among timer ioctls") Reference: http://lkml.kernel.org/r/089e082686ac9b482e055c832617@google.com Reported-by: syzbot <bot+e5f3c9783e7048a74233054febbe9f1bdf54b6da@syzkaller.appspotmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 31 October 2017, 07:28:16 UTC
518828f Brenda J. Butler 30 October 2017, 21:59:22 UTC tc-testing: fix arg to ip command: -s -> -n Fixes: 31c2611b66e0 ("selftests: Introduce a new test case to tc testsuite") Fixes: 76b903ee198d ("selftests: Introduce tc testsuite") Signed-off-by: Brenda J. Butler <bjb@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 31 October 2017, 02:12:52 UTC
822e86d Cong Wang 30 October 2017, 18:10:09 UTC net_sched: remove tcf_block_put_deferred() In commit 7aa0045dadb6 ("net_sched: introduce a workqueue for RCU callbacks of tc filter") I defer tcf_chain_flush() to a workqueue, this causes a use-after-free because qdisc is already destroyed after we queue this work. The tcf_block_put_deferred() is no longer necessary after we get RTNL for each tc filter destroy work, no others could jump in at this point. Same for tcf_chain_hold(), we are fully serialized now. This also reduces one indirection therefore makes the code more readable. Note this brings back a rcu_barrier(), however comparing to the code prior to commit 7aa0045dadb6 we still reduced one rcu_barrier(). For net-next, we can consider to refcnt tcf block to avoid it. Fixes: 7aa0045dadb6 ("net_sched: introduce a workqueue for RCU callbacks of tc filter") Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Pirko <jiri@resnulli.us> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 31 October 2017, 02:06:01 UTC
f9e56ba Guillaume Nault 30 October 2017, 16:58:58 UTC l2tp: hold tunnel in pppol2tp_connect() Use l2tp_tunnel_get() in pppol2tp_connect() to ensure the tunnel isn't going to disappear while processing the rest of the function. Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 31 October 2017, 01:59:52 UTC
5f47944 Linus Torvalds 30 October 2017, 23:38:03 UTC Merge tag 'pm-urgent-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "This fixes new breakage introduced by the most recent PM QoS fix in which, embarrassingly enough, I forgot to update dev_pm_qos_raw_read_value() to return the right default for devices with no PM QoS constraints at all which prevents runtime PM from suspending those devices (fix from Tero Kristo)" * tag 'pm-urgent-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / QoS: Fix default runtime_pm device resume latency 30 October 2017, 23:38:03 UTC
dc35b11 Chris Wilson 26 October 2017, 13:00:32 UTC drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr) Kasan spotted [IGT] gem_tiled_pread_pwrite: exiting, ret=0 ================================================================== BUG: KASAN: use-after-free in __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] Read of size 8 at addr ffff8801359da310 by task kworker/3:2/182 CPU: 3 PID: 182 Comm: kworker/3:2 Tainted: G U 4.14.0-rc6-CI-Custom_3340+ #1 Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 Workqueue: events __i915_gem_free_work [i915] Call Trace: dump_stack+0x68/0xa0 print_address_description+0x78/0x290 ? __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] kasan_report+0x23d/0x350 __asan_report_load8_noabort+0x19/0x20 __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] ? i915_gem_object_truncate+0x100/0x100 [i915] ? lock_acquire+0x380/0x380 __i915_gem_object_put_pages+0x30d/0x530 [i915] __i915_gem_free_objects+0x551/0xbd0 [i915] ? lock_acquire+0x13e/0x380 __i915_gem_free_work+0x4e/0x70 [i915] process_one_work+0x6f6/0x1590 ? pwq_dec_nr_in_flight+0x2b0/0x2b0 worker_thread+0xe6/0xe90 ? pci_mmcfg_check_reserved+0x110/0x110 kthread+0x309/0x410 ? process_one_work+0x1590/0x1590 ? kthread_create_on_node+0xb0/0xb0 ret_from_fork+0x27/0x40 Allocated by task 1801: save_stack_trace+0x1b/0x20 kasan_kmalloc+0xee/0x190 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0xdc/0x2e0 radix_tree_node_alloc.constprop.12+0x48/0x330 __radix_tree_create+0x274/0x480 __radix_tree_insert+0xa2/0x610 i915_gem_object_get_sg+0x224/0x670 [i915] i915_gem_object_get_page+0xb5/0x1c0 [i915] i915_gem_pread_ioctl+0x822/0xf60 [i915] drm_ioctl_kernel+0x13f/0x1c0 drm_ioctl+0x6cf/0x980 do_vfs_ioctl+0x184/0xf30 SyS_ioctl+0x41/0x70 entry_SYSCALL_64_fastpath+0x1c/0xb1 Freed by task 37: save_stack_trace+0x1b/0x20 kasan_slab_free+0xaf/0x190 kmem_cache_free+0xbf/0x340 radix_tree_node_rcu_free+0x79/0x90 rcu_process_callbacks+0x46d/0xf40 __do_softirq+0x21c/0x8d3 The buggy address belongs to the object at ffff8801359da0f0 which belongs to the cache radix_tree_node of size 576 The buggy address is located 544 bytes inside of 576-byte region [ffff8801359da0f0, ffff8801359da330) The buggy address belongs to the page: page:ffffea0004d67600 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x8000000000008100(slab|head) raw: 8000000000008100 0000000000000000 0000000000000000 0000000100110011 raw: ffffea0004b52920 ffffea0004b38020 ffff88015b416a80 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc ^ ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint which looks like the slab containing the radixtree iter was freed as we traversed the tree, taking the rcu read lock across the loop should prevent that (deferring all the frees until the end). Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com> Fixes: d1b48c1e7184 ("drm/i915: Replace execbuf vma ht with an idr") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171026130032.10677-2-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> (cherry picked from commit 547da76b5777859f98bb78e6b57f19463f803c04) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> 30 October 2017, 17:17:50 UTC
23e8733 Chris Wilson 26 October 2017, 13:00:31 UTC drm/i915: Hold rcu_read_lock when iterating over the radixtree (objects) Kasan spotted [IGT] gem_tiled_pread_pwrite: exiting, ret=0 ================================================================== BUG: KASAN: use-after-free in __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] Read of size 8 at addr ffff8801359da310 by task kworker/3:2/182 CPU: 3 PID: 182 Comm: kworker/3:2 Tainted: G U 4.14.0-rc6-CI-Custom_3340+ #1 Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 Workqueue: events __i915_gem_free_work [i915] Call Trace: dump_stack+0x68/0xa0 print_address_description+0x78/0x290 ? __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] kasan_report+0x23d/0x350 __asan_report_load8_noabort+0x19/0x20 __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] ? i915_gem_object_truncate+0x100/0x100 [i915] ? lock_acquire+0x380/0x380 __i915_gem_object_put_pages+0x30d/0x530 [i915] __i915_gem_free_objects+0x551/0xbd0 [i915] ? lock_acquire+0x13e/0x380 __i915_gem_free_work+0x4e/0x70 [i915] process_one_work+0x6f6/0x1590 ? pwq_dec_nr_in_flight+0x2b0/0x2b0 worker_thread+0xe6/0xe90 ? pci_mmcfg_check_reserved+0x110/0x110 kthread+0x309/0x410 ? process_one_work+0x1590/0x1590 ? kthread_create_on_node+0xb0/0xb0 ret_from_fork+0x27/0x40 Allocated by task 1801: save_stack_trace+0x1b/0x20 kasan_kmalloc+0xee/0x190 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0xdc/0x2e0 radix_tree_node_alloc.constprop.12+0x48/0x330 __radix_tree_create+0x274/0x480 __radix_tree_insert+0xa2/0x610 i915_gem_object_get_sg+0x224/0x670 [i915] i915_gem_object_get_page+0xb5/0x1c0 [i915] i915_gem_pread_ioctl+0x822/0xf60 [i915] drm_ioctl_kernel+0x13f/0x1c0 drm_ioctl+0x6cf/0x980 do_vfs_ioctl+0x184/0xf30 SyS_ioctl+0x41/0x70 entry_SYSCALL_64_fastpath+0x1c/0xb1 Freed by task 37: save_stack_trace+0x1b/0x20 kasan_slab_free+0xaf/0x190 kmem_cache_free+0xbf/0x340 radix_tree_node_rcu_free+0x79/0x90 rcu_process_callbacks+0x46d/0xf40 __do_softirq+0x21c/0x8d3 The buggy address belongs to the object at ffff8801359da0f0 which belongs to the cache radix_tree_node of size 576 The buggy address is located 544 bytes inside of 576-byte region [ffff8801359da0f0, ffff8801359da330) The buggy address belongs to the page: page:ffffea0004d67600 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x8000000000008100(slab|head) raw: 8000000000008100 0000000000000000 0000000000000000 0000000100110011 raw: ffffea0004b52920 ffffea0004b38020 ffff88015b416a80 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc ^ ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint which looks like the slab containing the radixtree iter was freed as we traversed the tree, taking the rcu read lock across the loop should prevent that (deferring all the frees until the end). Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com> Fixes: 96d776345277 ("drm/i915: Use a radixtree for random access to the object's backing storage") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171026130032.10677-1-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> (cherry picked from commit bea6e987c1ff358224e7bef7084be7650f5d1c38) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> 30 October 2017, 17:17:46 UTC
7c838e2 Jani Nikula 26 October 2017, 14:29:31 UTC drm/i915/edp: read edp display control registers unconditionally Per my reading of the eDP spec, DP_DPCD_DISPLAY_CONTROL_CAPABLE bit in DP_EDP_CONFIGURATION_CAP should be set if the eDP display control registers starting at offset DP_EDP_DPCD_REV are "enabled". Currently we check the bit before reading the registers, and DP_EDP_DPCD_REV is the only way to detect eDP revision. Turns out there are (likely buggy) displays that require eDP 1.4+ features, such as supported link rates and link rate select, but do not have the bit set. Read the display control registers unconditionally. They are supposed to read zero anyway if they are not supported, so there should be no harm in this. This fixes the referenced bug by enabling the eDP version check, and thus reading of the supported link rates. The panel in question has 0 in DP_MAX_LINK_RATE which is only supported in eDP 1.4+. Without the supported link rates method we default to RBR which is insufficient for the panel native mode. As a curiosity, the panel also has a bogus value of 0x12 in DP_EDP_DPCD_REV, but that passes our check for >= DP_EDP_14 (which is 0x03). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103400 Reported-and-tested-by: Nicolas P. <issun.artiste@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171026142932.17737-1-jani.nikula@intel.com (cherry picked from commit 0501a3b0eb01ac2209ef6fce76153e5d6b07034e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> 30 October 2017, 17:17:40 UTC
8777b92 Maarten Lankhorst 19 October 2017, 15:13:40 UTC drm/i915: Do not rely on wm preservation for ILK watermarks The original intent was to preserve watermarks as much as possible in intel_pipe_wm.raw_wm, and put the validated ones in intel_pipe_wm.wm. It seems this approach is insufficient and we don't always preserve the raw watermarks, so just use the atomic iterator we're already using to get a const pointer to all bound planes on the crtc. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373 Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: stable@vger.kernel.org #v4.8+ Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-1-maarten.lankhorst@linux.intel.com (cherry picked from commit 28283f4f359cd7cfa9e65457bb98c507a2cd0cd0) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> 30 October 2017, 17:16:32 UTC
713946d Manasi Navare 26 October 2017, 21:52:00 UTC drm/i915: Cancel the modeset retry work during modeset cleanup During modeset cleanup on driver unload we may have a pending hotplug work. This needs to be canceled early during the teardown so that it does not fire after we have freed the connector. We do this after drm_kms_helper_poll_fini(dev) since this might trigger modeset retry work due to link retrain and before intel_fbdev_fini() since this work requires the lock from fbdev. If this is not done we may see something like: DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) ------------[ cut here ]------------ WARNING: CPU: 4 PID: 5010 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x4e/0x60 Modules linked in: i915(-) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm vgem ax88179_178 +a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e ptp pps_core prime_numbers i2c_hid +[last unloaded: snd_hda_intel] CPU: 4 PID: 5010 Comm: drv_module_relo Tainted: G U 4.14.0-rc3-CI-CI_DRM_3186+ #1 Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWX1.R00.X104.A03.1709140524 09/14/2017 task: ffff8803c827aa40 task.stack: ffffc90000520000 RIP: 0010:mutex_destroy+0x4e/0x60 RSP: 0018:ffffc90000523d58 EFLAGS: 00010292 RAX: 000000000000002a RBX: ffff88044fbef648 RCX: 0000000000000000 RDX: 0000000080000001 RSI: 0000000000000001 RDI: ffffffff810f0cf0 RBP: ffffc90000523d60 R08: 0000000000000001 R09: 0000000000000001 R10: 000000000f21cb81 R11: 0000000000000000 R12: ffff88044f71efc8 R13: ffffffffa02b3d20 R14: ffffffffa02b3d90 R15: ffff880459b29308 FS: 00007f5df4d6e8c0(0000) GS:ffff88045d300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055ec51f00a18 CR3: 0000000451782006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: drm_fb_helper_fini+0xd9/0x130 intel_fbdev_destroy+0x12/0x60 [i915] intel_fbdev_fini+0x28/0x30 [i915] intel_modeset_cleanup+0x45/0xa0 [i915] i915_driver_unload+0x92/0x180 [i915] i915_pci_remove+0x19/0x30 [i915] i915_driver_unload+0x92/0x180 [i915] i915_pci_remove+0x19/0x30 [i915] pci_device_remove+0x39/0xb0 device_release_driver_internal+0x15d/0x220 driver_detach+0x40/0x80 bus_remove_driver+0x58/0xd0 driver_unregister+0x2c/0x40 pci_unregister_driver+0x36/0xb0 i915_exit+0x1a/0x8b [i915] SyS_delete_module+0x18c/0x1e0 entry_SYSCALL_64_fastpath+0x1c/0xb1 RIP: 0033:0x7f5df3286287 RSP: 002b:00007fff8e107cc8 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: ffffffff81493a03 RCX: 00007f5df3286287 RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000564c7be02e48 RBP: ffffc90000523f88 R08: 0000000000000000 R09: 0000000000000080 R10: 00007f5df4d6e8c0 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff8e107eb0 R14: 0000000000000000 R15: 0000000000000000 Or a GPF like: general protection fault: 0000 [#1] PREEMPT SMP Modules linked in: i915(-) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm vgem ax88179_178 +a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e ptp pps_core prime_numbers i2c_hid +[last unloaded: snd_hda_intel] CPU: 0 PID: 82 Comm: kworker/0:1 Tainted: G U W 4.14.0-rc3-CI-CI_DRM_3186+ #1 Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWX1.R00.X104.A03.1709140524 09/14/2017 Workqueue: events intel_dp_modeset_retry_work_fn [i915] task: ffff88045a5caa40 task.stack: ffffc90000378000 RIP: 0010:drm_setup_crtcs+0x143/0xbf0 RSP: 0018:ffffc9000037bd20 EFLAGS: 00010202 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000780 RDI: 00000000ffffffff RBP: ffffc9000037bdb8 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000780 R11: 0000000000000000 R12: 0000000000000002 R13: ffff88044fbef4e8 R14: 0000000000000780 R15: 0000000000000438 FS: 0000000000000000(0000) GS:ffff88045d200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055ec51ee5168 CR3: 000000044c89d003 CR4: 00000000003606f0 Call Trace: drm_fb_helper_hotplug_event.part.18+0x7e/0xc0 drm_fb_helper_hotplug_event+0x1a/0x20 intel_fbdev_output_poll_changed+0x1a/0x20 [i915] drm_kms_helper_hotplug_event+0x27/0x30 intel_dp_modeset_retry_work_fn+0x77/0x80 [i915] process_one_work+0x233/0x660 worker_thread+0x206/0x3b0 kthread+0x152/0x190 ? process_one_work+0x660/0x660 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x27/0x40 Code: 06 00 00 45 8b 45 20 31 db 45 31 e4 45 85 c0 0f 8e 91 06 00 00 44 8b 75 94 44 8b 7d 90 49 8b 45 28 49 63 d4 44 89 f6 41 83 c4 01 <48> 8b 04 d0 44 +89 fa 48 8b 38 48 8b 87 a8 01 00 00 ff 50 20 01 RIP: drm_setup_crtcs+0x143/0xbf0 RSP: ffffc9000037bd20 ---[ end trace 08901ff1a77d30c7 ]--- v2: * Rename it to intel_hpd_poll_fini() and call drm_kms_helper_fini() inside it as the first step before cancel work (Chris Wilson) * Add GPF trace in commit message and make the function static (Maarten Lankhorst) Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 9301397a63b3 ("drm/i915: Implement Link Rate fallback on Link training failure") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tony Cheng <tony.cheng@amd.com> Cc: Harry Wentland <Harry.wentland@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1509054720-25325-1-git-send-email-manasi.d.navare@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 886c6b8692ba5f71b578097524b3b082e2e02119) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> 30 October 2017, 17:15:51 UTC
b39ab98 Linus Torvalds 30 October 2017, 17:09:56 UTC Mark 'ioremap_page_range()' as possibly sleeping It turns out that some drivers seem to think it's ok to remap page ranges from within interrupts and even NMI's. That is definitely not the case, since the page table build-up is simply not interrupt-safe. This showed up in the zero-day robot that reported it for the ACPI APEI GHES ("Generic Hardware Error Source") driver. Normally it had been hidden by the fact that no page table operations had been needed because the vmalloc area had been set up by other things. Apparently due to a recent change to the GHEI driver: commit 77b246b32b2c ("acpi: apei: check for pending errors when probing GHES entries") 0day actually caught a case during bootup whenthe ioremap called down to page allocation. But that recent change only showed the symptom, it wasn't the root cause of the problem. Hopefully it is limited to just that one driver. If you need to access random physical memory, you either need to ioremap in process context, or you need to use the FIXMAP facility to set one particular fixmap entry to the required mapping - that can be done safely. Cc: Borislav Petkov <bp@suse.de> Cc: Len Brown <lenb@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Tyler Baicar <tbaicar@codeaurora.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 October 2017, 17:09:56 UTC
daea3da Linus Torvalds 30 October 2017, 16:41:54 UTC Merge tag 'mmc-v4.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC host fixes intended for v4.14-rc8: - renesas_sdhi: fix kernel panic - tmio: fix swiotlb buffer is full" * tag 'mmc-v4.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: renesas_sdhi: fix kernel panic in _internal_dmac.c mmc: tmio: fix swiotlb buffer is full 30 October 2017, 16:41:54 UTC
back to top