Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
f165740 jeepdude1980 07 February 2020, 13:34:00 UTC Delete MIT 07 February 2020, 13:34:00 UTC
90568ec Linus Torvalds 06 February 2020, 17:07:45 UTC Merge tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull more KVM updates from Paolo Bonzini: "s390: - fix register corruption - ENOTSUPP/EOPNOTSUPP mixed - reset cleanups/fixes - selftests x86: - Bug fixes and cleanups - AMD support for APIC virtualization even in combination with in-kernel PIT or IOAPIC. MIPS: - Compilation fix. Generic: - Fix refcount overflow for zero page" * tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits) KVM: vmx: delete meaningless vmx_decache_cr0_guest_bits() declaration KVM: x86: Mark CR4.UMIP as reserved based on associated CPUID bit x86: vmxfeatures: rename features for consistency with KVM and manual KVM: SVM: relax conditions for allowing MSR_IA32_SPEC_CTRL accesses KVM: x86: Fix perfctr WRMSR for running counters x86/kvm/hyper-v: don't allow to turn on unsupported VMX controls for nested guests x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs() kvm: mmu: Separate generating and setting mmio ptes kvm: mmu: Replace unsigned with unsigned int for PTE access KVM: nVMX: Remove stale comment from nested_vmx_load_cr3() KVM: MIPS: Fold comparecount_func() into comparecount_wakeup() KVM: MIPS: Fix a build error due to referencing not-yet-defined function x86/kvm: do not setup pv tlb flush when not paravirtualized KVM: fix overflow of zero page refcount with ksm running KVM: x86: Take a u64 when checking for a valid dr7 value KVM: x86: use raw clock values consistently KVM: x86: reorganize pvclock_gtod_data members KVM: nVMX: delete meaningless nested_vmx_run() declaration KVM: SVM: allow AVIC without split irqchip kvm: ioapic: Lazy update IOAPIC EOI ... 06 February 2020, 17:07:45 UTC
d854b2d Linus Torvalds 06 February 2020, 17:05:42 UTC Merge tag 'kgdb-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux Pull kgdb fix from Daniel Thompson: "One of the simplifications added for 5.6-rc1 has caused build regressions on some platforms (it was reported for sparc64). This fixes it with a revert" * tag 'kgdb-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: Revert "kdb: Get rid of confusing diag msg from "rd" if current task has no regs" 06 February 2020, 17:05:42 UTC
9e6c535 Linus Torvalds 06 February 2020, 14:17:38 UTC Merge tag 'pci-v5.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Define to_pci_sysdata() always to fix build breakage when !CONFIG_PCI (Jason A. Donenfeld) - Use PF PASID for VFs to fix VF IOMMU bind failures (Kuppuswamy Sathyanarayanan) * tag 'pci-v5.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/ATS: Use PF PASID for VFs x86/PCI: Define to_pci_sysdata() even when !CONFIG_PCI 06 February 2020, 14:17:38 UTC
750ce8c Linus Torvalds 06 February 2020, 14:15:01 UTC Merge tag 'sound-fix-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of pending small fixes: ALSA core: - PCM memory leak fix ASoC: - Lots of SOF and Intel driver fixes - Addition of COMMON_CLK for wcd934x - Regression fixes for AMD and Tegra platforms HD-audio: - DP-MST HDMI regression fix, Tegra workarounds, HP quirk fix Others: - A few fixes relevant with the recent uapi-updates - Sparse warnings and endianness fixes" * tag 'sound-fix-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits) ALSA: hda: Clear RIRB status before reading WP ALSA: hda/realtek - Fixed one of HP ALC671 platform Headset Mic supported ASoC: wcd934x: Add missing COMMON_CLK dependency to SND_SOC_ALL_CODECS ALSA: hda - Fix DP-MST support for NVIDIA codecs ASoC: wcd934x: Add missing COMMON_CLK dependency MAINTAINERS: Remove the Bard Liao from the MAINTAINERS of Realtek CODECs ASoC: tegra: Revert 24 and 32 bit support ASoC: SOF: Intel: add PCI ID for JasperLake ALSA: hdsp: Make the firmware loading ioctl a bit more readable ALSA: emu10k1: Fix annotation and cast for the recent uapi header change ALSA: dummy: Fix PCM format loop in proc output ALSA: usb-audio: Annotate endianess in Scarlett gen2 quirk ALSA: usb-audio: Fix endianess in descriptor validation ALSA: hda: Add JasperLake PCI ID and codec vid ALSA: pcm: Fix sparse warnings wrt snd_pcm_state_t ALSA: pcm: Fix memory leak at closing a stream without hw_free ALSA: uapi: Fix sparse warning ASoC: rt715: Add __maybe_unused to PM callbacks ASoC: rt711: Add __maybe_unused to PM callbacks ASoC: rt700: Add __maybe_unused to PM callbacks ... 06 February 2020, 14:15:01 UTC
4c46bef Linus Torvalds 06 February 2020, 12:21:01 UTC Merge tag 'ceph-for-5.6-rc1' of https://github.com/ceph/ceph-client Pull ceph fixes from Ilya Dryomov: - a set of patches that fixes various corner cases in mount and umount code (Xiubo Li). This has to do with choosing an MDS, distinguishing between laggy and down MDSes and parsing the server path. - inode initialization fixes (Jeff Layton). The one included here mostly concerns things like open_by_handle() and there is another one that will come through Al. - copy_file_range() now uses the new copy-from2 op (Luis Henriques). The existing copy-from op turned out to be infeasible for generic filesystem use; we disable the copy offload if OSDs don't support copy-from2. - a patch to link "rbd" and "block" devices together in sysfs (Hannes Reinecke) ... and a smattering of cleanups from Xiubo, Jeff and Chengguang. * tag 'ceph-for-5.6-rc1' of https://github.com/ceph/ceph-client: (25 commits) rbd: set the 'device' link in sysfs ceph: move net/ceph/ceph_fs.c to fs/ceph/util.c ceph: print name of xattr in __ceph_{get,set}xattr() douts ceph: print r_direct_hash in hex in __choose_mds() dout ceph: use copy-from2 op in copy_file_range ceph: close holes in structs ceph_mds_session and ceph_mds_request rbd: work around -Wuninitialized warning ceph: allocate the correct amount of extra bytes for the session features ceph: rename get_session and switch to use ceph_get_mds_session ceph: remove the extra slashes in the server path ceph: add possible_max_rank and make the code more readable ceph: print dentry offset in hex and fix xattr_version type ceph: only touch the caps which have the subset mask requested ceph: don't clear I_NEW until inode metadata is fully populated ceph: retry the same mds later after the new session is opened ceph: check availability of mds cluster on mount after wait timeout ceph: keep the session state until it is released ceph: add __send_request helper ceph: ensure we have a new cap before continuing in fill_inode ceph: drop unused ttl_from parameter from fill_inode ... 06 February 2020, 12:21:01 UTC
fcf2736 Daniel Thompson 06 February 2020, 11:40:09 UTC Revert "kdb: Get rid of confusing diag msg from "rd" if current task has no regs" This reverts commit bbfceba15f8d1260c328a254efc2b3f2deae4904. When DBG_MAX_REG_NUM is zero then a number of symbols are conditionally defined. It is therefore not possible to check it using C expressions. Reported-by: Anatoly Pugachev <matorola@gmail.com> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> 06 February 2020, 11:40:09 UTC
6954b32 Takashi Iwai 06 February 2020, 10:58:44 UTC Merge tag 'asoc-v5.6-3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fix for v5.6 An incremental fix for the Qualcomm COMMON_CLK issue. 06 February 2020, 10:58:44 UTC
6d011d5 Mohan Kumar 06 February 2020, 10:10:53 UTC ALSA: hda: Clear RIRB status before reading WP RIRB interrupt status getting cleared after the write pointer is read causes a race condition, where last response(s) into RIRB may remain unserviced by IRQ, eventually causing azx_rirb_get_response to fall back to polling mode. Clearing the RIRB interrupt status ahead of write pointer access ensures that this condition is avoided. Signed-off-by: Mohan Kumar <mkumard@nvidia.com> Signed-off-by: Viswanath L <viswanathl@nvidia.com> Link: https://lore.kernel.org/r/1580983853-351-1-git-send-email-viswanathl@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de> 06 February 2020, 10:46:18 UTC
5b21115 Linus Torvalds 06 February 2020, 08:13:23 UTC Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu updates from Greg Ungerer: "A couple of changes: - remove old CONFIG options from the m68knommu defconfig files - fix a warning in the m68k non-MMU get_user() macro" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix memcpy() out of bounds warning in get_user() m68k: configs: Cleanup old Kconfig IO scheduler options 06 February 2020, 08:13:23 UTC
85e5529 Linus Torvalds 06 February 2020, 08:08:59 UTC Merge tag 'Smack-for-5.6' of git://github.com/cschaufler/smack-next Pull smack fix from Casey Schaufler: "One fix for an obscure error found using an old version of ping(1) that did not use IPv6 sockets in the documented way" * tag 'Smack-for-5.6' of git://github.com/cschaufler/smack-next: broken ping to ipv6 linklocal addresses on debian buster 06 February 2020, 08:08:59 UTC
99be3f6 Linus Torvalds 06 February 2020, 07:58:38 UTC Merge tag 'xfs-5.6-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull moar xfs updates from Darrick Wong: "This contains the buffer error code refactoring I mentioned last week, now that it has had extra time to complete the full xfs fuzz testing suite to make sure there aren't any obvious new bugs" * tag 'xfs-5.6-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix xfs_buf_ioerror_alert location reporting xfs: remove unnecessary null pointer checks from _read_agf callers xfs: make xfs_*read_agf return EAGAIN to ALLOC_FLAG_TRYLOCK callers xfs: remove the xfs_btree_get_buf[ls] functions xfs: make xfs_trans_get_buf return an error code xfs: make xfs_trans_get_buf_map return an error code xfs: make xfs_buf_read return an error code xfs: make xfs_buf_get_uncached return an error code xfs: make xfs_buf_get return an error code xfs: make xfs_buf_read_map return an error code xfs: make xfs_buf_get_map return an error code xfs: make xfs_buf_alloc return an error code 06 February 2020, 07:58:38 UTC
e310396 Linus Torvalds 06 February 2020, 07:12:11 UTC Merge tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - Added new "bootconfig". This looks for a file appended to initrd to add boot config options, and has been discussed thoroughly at Linux Plumbers. Very useful for adding kprobes at bootup. Only enabled if "bootconfig" is on the real kernel command line. - Created dynamic event creation. Merges common code between creating synthetic events and kprobe events. - Rename perf "ring_buffer" structure to "perf_buffer" - Rename ftrace "ring_buffer" structure to "trace_buffer" Had to rename existing "trace_buffer" to "array_buffer" - Allow trace_printk() to work withing (some) tracing code. - Sort of tracing configs to be a little better organized - Fixed bug where ftrace_graph hash was not being protected properly - Various other small fixes and clean ups * tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits) bootconfig: Show the number of nodes on boot message tools/bootconfig: Show the number of bootconfig nodes bootconfig: Add more parse error messages bootconfig: Use bootconfig instead of boot config ftrace: Protect ftrace_graph_hash with ftrace_sync ftrace: Add comment to why rcu_dereference_sched() is open coded tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu tracing: Annotate ftrace_graph_hash pointer with __rcu bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline tracing: Use seq_buf for building dynevent_cmd string tracing: Remove useless code in dynevent_arg_pair_add() tracing: Remove check_arg() callbacks from dynevent args tracing: Consolidate some synth_event_trace code tracing: Fix now invalid var_ref_vals assumption in trace action tracing: Change trace_boot to use synth_event interface tracing: Move tracing selftests to bottom of menu tracing: Move mmio tracer config up with the other tracers tracing: Move tracing test module configs together tracing: Move all function tracing configs together tracing: Documentation for in-kernel synthetic event API ... 06 February 2020, 07:12:11 UTC
f2adbae Kailang Yang 05 February 2020, 07:40:01 UTC ALSA: hda/realtek - Fixed one of HP ALC671 platform Headset Mic supported HP want to keep BIOS verb table for release platform. So, it need to add 0x19 pin for quirk. Fixes: 5af29028fd6d ("ALSA: hda/realtek - Add Headset Mic supported for HP cPC") Signed-off-by: Kailang Yang <kailang@realtek.com> Link: https://lore.kernel.org/r/74636ccb700a4cbda24c58a99dc430ce@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de> 06 February 2020, 06:56:37 UTC
c1ef57a Linus Torvalds 06 February 2020, 06:33:17 UTC Merge tag 'io_uring-5.6-2020-02-05' of git://git.kernel.dk/linux-block Pull io_uring updates from Jens Axboe: "Some later fixes for io_uring: - Small cleanup series from Pavel - Belt and suspenders build time check of sqe size and layout (Stefan) - Addition of ->show_fdinfo() on request of Jann Horn, to aid in understanding mapped personalities - eventfd recursion/deadlock fix, for both io_uring and aio - Fixup for send/recv handling - Fixup for double deferral of read/write request - Fix for potential double completion event for close request - Adjust fadvise advice async/inline behavior - Fix for shutdown hang with SQPOLL thread - Fix for potential use-after-free of fixed file table" * tag 'io_uring-5.6-2020-02-05' of git://git.kernel.dk/linux-block: io_uring: cleanup fixed file data table references io_uring: spin for sq thread to idle on shutdown aio: prevent potential eventfd recursion on poll io_uring: put the flag changing code in the same spot io_uring: iterate req cache backwards io_uring: punt even fadvise() WILLNEED to async context io_uring: fix sporadic double CQE entry for close io_uring: remove extra ->file check io_uring: don't map read/write iovec potentially twice io_uring: use the proper helpers for io_send/recv io_uring: prevent potential eventfd recursion on poll eventfd: track eventfd_signal() recursion depth io_uring: add BUILD_BUG_ON() to assert the layout of struct io_uring_sqe io_uring: add ->show_fdinfo() for the io_uring file descriptor 06 February 2020, 06:33:17 UTC
ed535f2 Linus Torvalds 06 February 2020, 06:15:23 UTC Merge tag 'block-5.6-2020-02-05' of git://git.kernel.dk/linux-block Pull more block updates from Jens Axboe: "Some later arrivals, but all fixes at this point: - bcache fix series (Coly) - Series of BFQ fixes (Paolo) - NVMe pull request from Keith with a few minor NVMe fixes - Various little tweaks" * tag 'block-5.6-2020-02-05' of git://git.kernel.dk/linux-block: (23 commits) nvmet: update AEN list and array at one place nvmet: Fix controller use after free nvmet: Fix error print message at nvmet_install_queue function brd: check and limit max_part par nvme-pci: remove nvmeq->tags nvmet: fix dsm failure when payload does not match sgl descriptor nvmet: Pass lockdep expression to RCU lists block, bfq: clarify the goal of bfq_split_bfqq() block, bfq: get a ref to a group when adding it to a service tree block, bfq: remove ifdefs from around gets/puts of bfq groups block, bfq: extend incomplete name of field on_st block, bfq: get extra ref to prevent a queue from being freed during a group move block, bfq: do not insert oom queue into position tree block, bfq: do not plug I/O for bfq_queues with no proc refs bcache: check return value of prio_read() bcache: fix incorrect data type usage in btree_flush_write() bcache: add readahead cache policy options via sysfs interface bcache: explicity type cast in bset_bkey_last() bcache: fix memory corruption in bch_cache_accounting_clear() xen/blkfront: limit allocated memory size to actual use case ... 06 February 2020, 06:15:23 UTC
0384066 Linus Torvalds 06 February 2020, 06:11:50 UTC Merge tag 'libata-5.6-2020-02-05' of git://git.kernel.dk/linux-block Pull libata updates from Jens Axboe: - Add a Sandisk CF card to supported pata_pcmcia list (Christian) - Move pata_arasan_cf away from legacy API (Peter) - Ensure ahci DMA/ints are shut down on shutdown (Prabhakar) * tag 'libata-5.6-2020-02-05' of git://git.kernel.dk/linux-block: ata: pata_arasan_cf: Use dma_request_chan() instead dma_request_slave_channel() ata: ahci: Add shutdown to freeze hardware resources of ahci pata_pcmia: add SanDisk High (>8G) CF card to supported list 06 February 2020, 06:11:50 UTC
a005740 Masami Hiramatsu 05 February 2020, 13:50:23 UTC bootconfig: Show the number of nodes on boot message Show the number of bootconfig nodes on boot message. Link: http://lkml.kernel.org/r/158091062297.27924.9051634676068550285.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 05 February 2020, 22:17:05 UTC
0f0d0a7 Masami Hiramatsu 05 February 2020, 13:50:13 UTC tools/bootconfig: Show the number of bootconfig nodes Show the number of bootconfig nodes when applying new bootconfig to initrd. Since there are limitations of bootconfig not only in its filesize, but also the number of nodes, the number should be shown when applying so that user can get the feeling of scale of current bootconfig. Link: http://lkml.kernel.org/r/158091061337.27924.10886706631693823982.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 05 February 2020, 22:17:05 UTC
597c0e3 Masami Hiramatsu 05 February 2020, 13:50:04 UTC bootconfig: Add more parse error messages Add more error messages for following cases. - Exceeding max number of nodes - Config tree data is empty (e.g. comment only) - Config data is empty or exceeding max size - bootconfig is already initialized Link: http://lkml.kernel.org/r/158091060401.27924.9024818742827122764.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 05 February 2020, 22:17:05 UTC
e241d14 Masami Hiramatsu 05 February 2020, 13:49:54 UTC bootconfig: Use bootconfig instead of boot config Use "bootconfig" (1 word) instead of "boot config" (2 words) in the boot message. Link: http://lkml.kernel.org/r/158091059459.27924.14414336187441539879.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 05 February 2020, 22:17:05 UTC
54a16ff Steven Rostedt (VMware) 05 February 2020, 14:20:32 UTC ftrace: Protect ftrace_graph_hash with ftrace_sync As function_graph tracer can run when RCU is not "watching", it can not be protected by synchronize_rcu() it requires running a task on each CPU before it can be freed. Calling schedule_on_each_cpu(ftrace_sync) needs to be used. Link: https://lore.kernel.org/r/20200205131110.GT2935@paulmck-ThinkPad-P72 Cc: stable@vger.kernel.org Fixes: b9b0c831bed26 ("ftrace: Convert graph filter to use hash tables") Reported-by: "Paul E. McKenney" <paulmck@kernel.org> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 05 February 2020, 22:16:42 UTC
87fbfff Casey Schaufler 03 February 2020, 17:15:00 UTC broken ping to ipv6 linklocal addresses on debian buster I am seeing ping failures to IPv6 linklocal addresses with Debian buster. Easiest example to reproduce is: $ ping -c1 -w1 ff02::1%eth1 connect: Invalid argument $ ping -c1 -w1 ff02::1%eth1 PING ff02::01%eth1(ff02::1%eth1) 56 data bytes 64 bytes from fe80::e0:f9ff:fe0c:37%eth1: icmp_seq=1 ttl=64 time=0.059 ms git bisect traced the failure to commit b9ef5513c99b ("smack: Check address length before reading address family") Arguably ping is being stupid since the buster version is not setting the address family properly (ping on stretch for example does): $ strace -e connect ping6 -c1 -w1 ff02::1%eth1 connect(5, {sa_family=AF_UNSPEC, sa_data="\4\1\0\0\0\0\377\2\0\0\0\0\0\0\0\0\0\0\0\0\0\1\3\0\0\0"}, 28) = -1 EINVAL (Invalid argument) but the command works fine on kernels prior to this commit, so this is breakage which goes against the Linux paradigm of "don't break userspace" Cc: stable@vger.kernel.org Reported-by: David Ahern <dsahern@gmail.com> Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>  security/smack/smack_lsm.c | 41 +++++++++++++++++++---------------------- 1 file changed, 19 insertions(+), 22 deletions(-) 05 February 2020, 22:16:27 UTC
16052dd Steven Rostedt (VMware) 05 February 2020, 07:17:57 UTC ftrace: Add comment to why rcu_dereference_sched() is open coded Because the function graph tracer can execute in sections where RCU is not "watching", the rcu_dereference_sched() for the has needs to be open coded. This is fine because the RCU "flavor" of the ftrace hash is protected by its own RCU handling (it does its own little synchronization on every CPU and does not rely on RCU sched). Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 05 February 2020, 22:15:57 UTC
fd0e685 Amol Grover 05 February 2020, 05:57:02 UTC tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu Fix following instances of sparse error kernel/trace/ftrace.c:5667:29: error: incompatible types in comparison kernel/trace/ftrace.c:5813:21: error: incompatible types in comparison kernel/trace/ftrace.c:5868:36: error: incompatible types in comparison kernel/trace/ftrace.c:5870:25: error: incompatible types in comparison Use rcu_dereference_protected to dereference the newly annotated pointer. Link: http://lkml.kernel.org/r/20200205055701.30195-1-frextrite@gmail.com Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 05 February 2020, 22:14:37 UTC
24a9729 Amol Grover 01 February 2020, 07:27:04 UTC tracing: Annotate ftrace_graph_hash pointer with __rcu Fix following instances of sparse error kernel/trace/ftrace.c:5664:29: error: incompatible types in comparison kernel/trace/ftrace.c:5785:21: error: incompatible types in comparison kernel/trace/ftrace.c:5864:36: error: incompatible types in comparison kernel/trace/ftrace.c:5866:25: error: incompatible types in comparison Use rcu_dereference_protected to access the __rcu annotated pointer. Link: http://lkml.kernel.org/r/20200201072703.17330-1-frextrite@gmail.com Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 05 February 2020, 22:14:26 UTC
4c7d00c Linus Torvalds 05 February 2020, 18:11:51 UTC Merge tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Mostly cleanups and minor improvements with some new chip support for some drivers" * tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits) pwm: Remove set but not set variable 'pwm' pwm: sun4i: Initialize variables before use pwm: stm32: Remove automatic output enable pwm: sun4i: Narrow scope of local variable pwm: bcm2835: Allow building for ARCH_BRCMSTB pwm: imx27: Eliminate error message for defer probe pwm: sun4i: Fix inconsistent IS_ERR and PTR_ERR pwm: sun4i: Move pwm_calculate() out of spin_lock() pwm: omap-dmtimer: Allow compiling with COMPILE_TEST pwm: omap-dmtimer: put_device() after of_find_device_by_node() pwm: omap-dmtimer: Simplify error handling pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional pwm: Implement tracing for .get_state() and .apply_state() pwm: rcar: Document inability to set duty_cycle = 0 pwm: rcar: Drop useless call to pwm_get_state() pwm: Fix minor Kconfig whitespace issues pwm: atmel: Implement .get_state() pwm: atmel: Use register accessors for channels pwm: atmel: Document known weaknesses of both hardware and software pwm: atmel: Replace loop in prescale calculation by ad-hoc calculation ... 05 February 2020, 18:11:51 UTC
18ea671 Linus Torvalds 05 February 2020, 18:07:39 UTC Merge tag 'dmaengine-fix-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "Fixes for: - Documentation build error fix - Fix dma_request_chan() error return - Remove unneeded conversion in idxd driver - Fix pointer check for dma_async_device_channel_register() - Fix slave-channel symlink cleanup" * tag 'dmaengine-fix-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: Cleanups for the slave <-> channel symlink support dmaengine: fix null ptr check for __dma_async_device_channel_register() dmaengine: idxd: fix boolconv.cocci warnings dmaengine: Fix return value for dma_request_chan() in case of failure dmaengine: doc: Properly indent metadata title 05 February 2020, 18:07:39 UTC
2e34673 Kuppuswamy Sathyanarayanan 29 January 2020, 19:14:00 UTC PCI/ATS: Use PF PASID for VFs Per PCIe r5.0, sec 9.3.7.14, if a PF implements the PASID Capability, the PF PASID configuration is shared by its VFs, and VFs must not implement their own PASID Capability. But commit 751035b8dc06 ("PCI/ATS: Cache PASID Capability offset") changed pci_max_pasids() and pci_pasid_features() to use the PASID Capability of the VF device instead of the associated PF device. This leads to IOMMU bind failures when pci_max_pasids() and pci_pasid_features() are called for VFs. In pci_max_pasids() and pci_pasid_features(), always use the PF PASID Capability. Fixes: 751035b8dc06 ("PCI/ATS: Cache PASID Capability offset") Link: https://lore.kernel.org/r/fe891f9755cb18349389609e7fed9940fc5b081a.1580325170.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v5.5+ 05 February 2020, 17:58:08 UTC
4fc2ea6 Linus Torvalds 05 February 2020, 17:49:54 UTC Merge tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Allow compiling the ARM-SMMU drivers as modules. - Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code collected by Will Deacon. The merge-commit (6855d1ba7537) has all the details. - Cleanup of the iommu_put_resv_regions() call-backs in various drivers. - AMD IOMMU driver cleanups. - Update for the x2APIC support in the AMD IOMMU driver. - Preparation patches for Intel VT-d nested mode support. - RMRR and identity domain handling fixes for the Intel VT-d driver. - More small fixes and cleanups. * tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits) iommu/amd: Remove the unnecessary assignment iommu/vt-d: Remove unnecessary WARN_ON_ONCE() iommu/vt-d: Unnecessary to handle default identity domain iommu/vt-d: Allow devices with RMRRs to use identity domain iommu/vt-d: Add RMRR base and end addresses sanity check iommu/vt-d: Mark firmware tainted if RMRR fails sanity check iommu/amd: Remove unused struct member iommu/amd: Replace two consecutive readl calls with one readq iommu/vt-d: Don't reject Host Bridge due to scope mismatch PCI/ATS: Add PASID stubs iommu/arm-smmu-v3: Return -EBUSY when trying to re-add a device iommu/arm-smmu-v3: Improve add_device() error handling iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE iommu/arm-smmu-v3: Add second level of context descriptor table iommu/arm-smmu-v3: Prepare for handling arm_smmu_write_ctx_desc() failure iommu/arm-smmu-v3: Propagate ssid_bits iommu/arm-smmu-v3: Add support for Substream IDs iommu/arm-smmu-v3: Add context descriptor tables allocators iommu/arm-smmu-v3: Prepare arm_smmu_s1_cfg for SSID support ACPI/IORT: Parse SSID property of named component node ... 05 February 2020, 17:49:54 UTC
d271ab2 Linus Torvalds 05 February 2020, 17:44:14 UTC Merge tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - fix a bug introduced in 5.5 in the Xen gntdev driver - fix the Xen balloon driver when running on ancient Xen versions - allow Xen stubdoms to control interrupt enable flags of passed-through PCI cards - release resources in Xen backends under memory pressure * tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/blkback: Consistently insert one empty line between functions xen/blkback: Remove unnecessary static variable name prefixes xen/blkback: Squeeze page pools if a memory pressure is detected xenbus/backend: Protect xenbus callback with lock xenbus/backend: Add memory pressure handler callback xen/gntdev: Do not use mm notifiers with autotranslating guests xen/balloon: Support xend-based toolstack take two xen-pciback: optionally allow interrupt enable flag writes 05 February 2020, 17:44:14 UTC
2634744 Linus Torvalds 05 February 2020, 17:37:25 UTC Merge tag 'devicetree-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix incorrect $id paths in schemas - Two fixes for Intel LGM SoC binding schemas * tag 'devicetree-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Fix paths in schema $id fields dt-bindings: PCI: intel: Fix dt_binding_check compilation failure dt-bindings: phy: Fix errors in intel,lgm-emmc-phy example 05 February 2020, 17:37:25 UTC
cfb4b57 Linus Torvalds 05 February 2020, 17:33:35 UTC Merge tag 's390-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Vasily Gorbik: "The second round of s390 fixes and features for 5.6: - Add KPROBES_ON_FTRACE support - Add EP11 AES secure keys support - PAES rework and prerequisites for paes-s390 ciphers selftests - Fix page table upgrade for hugetlbfs" * tag 's390-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pkey/zcrypt: Support EP11 AES secure keys s390/zcrypt: extend EP11 card and queue sysfs attributes s390/zcrypt: add new low level ep11 functions support file s390/zcrypt: ep11 structs rework, export zcrypt_send_ep11_cprb s390/zcrypt: enable card/domain autoselect on ep11 cprbs s390/crypto: enable clear key values for paes ciphers s390/pkey: Add support for key blob with clear key value s390/crypto: Rework on paes implementation s390: support KPROBES_ON_FTRACE s390/mm: fix dynamic pagetable upgrade for hugetlbfs 05 February 2020, 17:33:35 UTC
a8be1ad Miaohe Lin 05 February 2020, 15:33:53 UTC KVM: vmx: delete meaningless vmx_decache_cr0_guest_bits() declaration The function vmx_decache_cr0_guest_bits() is only called below its implementation. So this is meaningless and should be removed. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 15:44:06 UTC
d76c7fb Sean Christopherson 28 January 2020, 23:53:44 UTC KVM: x86: Mark CR4.UMIP as reserved based on associated CPUID bit Re-add code to mark CR4.UMIP as reserved if UMIP is not supported by the host. The UMIP handling was unintentionally dropped during a recent refactoring. Not flagging CR4.UMIP allows the guest to set its CR4.UMIP regardless of host support or userspace desires. On CPUs with UMIP support, including emulated UMIP, this allows the guest to enable UMIP against the wishes of the userspace VMM. On CPUs without any form of UMIP, this results in a failed VM-Enter due to invalid guest state. Fixes: 345599f9a2928 ("KVM: x86: Add macro to ensure reserved cr4 bits checks stay in sync") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 15:30:19 UTC
bcfcff6 Paolo Bonzini 05 February 2020, 15:20:23 UTC x86: vmxfeatures: rename features for consistency with KVM and manual Three of the feature bits in vmxfeatures.h have names that are different from the Intel SDM. The names have been adjusted recently in KVM but they were using the old name in the tip tree's x86/cpu branch. Adjust for consistency. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 15:22:59 UTC
ef09f4f Paolo Bonzini 05 February 2020, 15:15:05 UTC Merge tag 'kvm-s390-next-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes and cleanups for 5.6 - fix register corruption - ENOTSUPP/EOPNOTSUPP mixed - reset cleanups/fixes - selftests 05 February 2020, 15:15:05 UTC
df7e881 Paolo Bonzini 05 February 2020, 15:10:52 UTC KVM: SVM: relax conditions for allowing MSR_IA32_SPEC_CTRL accesses Userspace that does not know about the AMD_IBRS bit might still allow the guest to protect itself with MSR_IA32_SPEC_CTRL using the Intel SPEC_CTRL bit. However, svm.c disallows this and will cause a #GP in the guest when writing to the MSR. Fix this by loosening the test and allowing the Intel CPUID bit, and in fact allow the AMD_STIBP bit as well since it allows writing to MSR_IA32_SPEC_CTRL too. Reported-by: Zhiyi Guo <zhguo@redhat.com> Analyzed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Analyzed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 15:12:57 UTC
4400cf5 Eric Hankland 27 January 2020, 21:22:56 UTC KVM: x86: Fix perfctr WRMSR for running counters Correct the logic in intel_pmu_set_msr() for fixed and general purpose counters. This was recently changed to set pmc->counter without taking in to account the value of pmc_read_counter() which will be incorrect if the counter is currently running and non-zero; this changes back to the old logic which accounted for the value of currently running counters. Signed-off-by: Eric Hankland <ehankland@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 15:01:15 UTC
a835023 Vitaly Kuznetsov 05 February 2020, 12:30:34 UTC x86/kvm/hyper-v: don't allow to turn on unsupported VMX controls for nested guests Sane L1 hypervisors are not supposed to turn any of the unsupported VMX controls on for its guests and nested_vmx_check_controls() checks for that. This is, however, not the case for the controls which are supported on the host but are missing in enlightened VMCS and when eVMCS is in use. It would certainly be possible to add these missing checks to nested_check_vm_execution_controls()/_vm_exit_controls()/.. but it seems preferable to keep eVMCS-specific stuff in eVMCS and reduce the impact on non-eVMCS guests by doing less unrelated checks. Create a separate nested_evmcs_check_controls() for this purpose. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:55:26 UTC
31de3d2 Vitaly Kuznetsov 05 February 2020, 12:30:33 UTC x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs() With fine grained VMX feature enablement QEMU>=4.2 tries to do KVM_SET_MSRS with default (matching CPU model) values and in case eVMCS is also enabled, fails. It would be possible to drop VMX feature filtering completely and make this a guest's responsibility: if it decides to use eVMCS it should know which fields are available and which are not. Hyper-V mostly complies to this, however, there are some problematic controls: SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES VM_{ENTRY,EXIT}_LOAD_IA32_PERF_GLOBAL_CTRL which Hyper-V enables. As there are no corresponding fields in eVMCS, we can't handle this properly in KVM. This is a Hyper-V issue. Move VMX controls sanitization from nested_enable_evmcs() to vmx_get_msr(), and do the bare minimum (only clear controls which are known to cause issues). This allows userspace to keep setting controls it wants and at the same time hides them from the guest. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:55:06 UTC
8f79b06 Ben Gardon 03 February 2020, 23:09:10 UTC kvm: mmu: Separate generating and setting mmio ptes Separate the functions for generating MMIO page table entries from the function that inserts them into the paging structure. This refactoring will facilitate changes to the MMU sychronization model to use atomic compare / exchanges (which are not guaranteed to succeed) instead of a monolithic MMU lock. No functional change expected. Tested by running kvm-unit-tests on an Intel Haswell machine. This commit introduced no new failures. Signed-off-by: Ben Gardon <bgardon@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Reviewed-by: Peter Shier <pshier@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:54:07 UTC
0a2b64c Ben Gardon 03 February 2020, 23:09:09 UTC kvm: mmu: Replace unsigned with unsigned int for PTE access There are several functions which pass an access permission mask for SPTEs as an unsigned. This works, but checkpatch complains about it. Switch the occurrences of unsigned to unsigned int to satisfy checkpatch. No functional change expected. Tested by running kvm-unit-tests on an Intel Haswell machine. This commit introduced no new failures. Signed-off-by: Ben Gardon <bgardon@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:54:00 UTC
ea79a75 Sean Christopherson 04 February 2020, 15:32:59 UTC KVM: nVMX: Remove stale comment from nested_vmx_load_cr3() The blurb pertaining to the return value of nested_vmx_load_cr3() no longer matches reality, remove it entirely as the behavior it is attempting to document is quite obvious when reading the actual code. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:31:25 UTC
879a376 Sean Christopherson 03 February 2020, 18:42:00 UTC KVM: MIPS: Fold comparecount_func() into comparecount_wakeup() Fold kvm_mips_comparecount_func() into kvm_mips_comparecount_wakeup() to eliminate the nondescript function name as well as its unnecessary cast of a vcpu to "unsigned long" and back to a vcpu. Presumably func() was used as a callback at some point during pre-upstream development, as wakeup() is the only user of func() and has been the only user since both with introduced by commit 669e846e6c4e ("KVM/MIPS32: MIPS arch specific APIs for KVM"). Cc: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:29:55 UTC
09df630 Sean Christopherson 03 February 2020, 18:41:59 UTC KVM: MIPS: Fix a build error due to referencing not-yet-defined function Hoist kvm_mips_comparecount_wakeup() above its only user, kvm_arch_vcpu_create() to fix a compilation error due to referencing an undefined function. Fixes: d11dfed5d700 ("KVM: MIPS: Move all vcpu init code into kvm_arch_vcpu_create()") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:29:01 UTC
64b38bd Thadeu Lima de Souza Cascardo 31 January 2020, 15:56:55 UTC x86/kvm: do not setup pv tlb flush when not paravirtualized kvm_setup_pv_tlb_flush will waste memory and print a misguiding message when KVM paravirtualization is not available. Intel SDM says that the when cpuid is used with EAX higher than the maximum supported value for basic of extended function, the data for the highest supported basic function will be returned. So, in some systems, kvm_arch_para_features will return bogus data, causing kvm_setup_pv_tlb_flush to detect support for pv tlb flush. Testing for kvm_para_available will work as it checks for the hypervisor signature. Besides, when the "nopv" command line parameter is used, it should not continue as well, as kvm_guest_init will no be called in that case. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:28:07 UTC
7df003c Zhuang Yanying 12 October 2019, 03:37:31 UTC KVM: fix overflow of zero page refcount with ksm running We are testing Virtual Machine with KSM on v5.4-rc2 kernel, and found the zero_page refcount overflow. The cause of refcount overflow is increased in try_async_pf (get_user_page) without being decreased in mmu_set_spte() while handling ept violation. In kvm_release_pfn_clean(), only unreserved page will call put_page. However, zero page is reserved. So, as well as creating and destroy vm, the refcount of zero page will continue to increase until it overflows. step1: echo 10000 > /sys/kernel/pages_to_scan/pages_to_scan echo 1 > /sys/kernel/pages_to_scan/run echo 1 > /sys/kernel/pages_to_scan/use_zero_pages step2: just create several normal qemu kvm vms. And destroy it after 10s. Repeat this action all the time. After a long period of time, all domains hang because of the refcount of zero page overflow. Qemu print error log as follow: … error: kvm run failed Bad address EAX=00006cdc EBX=00000008 ECX=80202001 EDX=078bfbfd ESI=ffffffff EDI=00000000 EBP=00000008 ESP=00006cc4 EIP=000efd75 EFL=00010002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA] SS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] DS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] FS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] GS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy GDT= 000f7070 00000037 IDT= 000f70ae 00000000 CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400 EFER=0000000000000000 Code=00 01 00 00 00 e9 e8 00 00 00 c7 05 4c 55 0f 00 01 00 00 00 <8b> 35 00 00 01 00 8b 3d 04 00 01 00 b8 d8 d3 00 00 c1 e0 08 0c ea a3 00 00 01 00 c7 05 04 … Meanwhile, a kernel warning is departed. [40914.836375] WARNING: CPU: 3 PID: 82067 at ./include/linux/mm.h:987 try_get_page+0x1f/0x30 [40914.836412] CPU: 3 PID: 82067 Comm: CPU 0/KVM Kdump: loaded Tainted: G OE 5.2.0-rc2 #5 [40914.836415] RIP: 0010:try_get_page+0x1f/0x30 [40914.836417] Code: 40 00 c3 0f 1f 84 00 00 00 00 00 48 8b 47 08 a8 01 75 11 8b 47 34 85 c0 7e 10 f0 ff 47 34 b8 01 00 00 00 c3 48 8d 78 ff eb e9 <0f> 0b 31 c0 c3 66 90 66 2e 0f 1f 84 00 0 0 00 00 00 48 8b 47 08 a8 [40914.836418] RSP: 0018:ffffb4144e523988 EFLAGS: 00010286 [40914.836419] RAX: 0000000080000000 RBX: 0000000000000326 RCX: 0000000000000000 [40914.836420] RDX: 0000000000000000 RSI: 00004ffdeba10000 RDI: ffffdf07093f6440 [40914.836421] RBP: ffffdf07093f6440 R08: 800000424fd91225 R09: 0000000000000000 [40914.836421] R10: ffff9eb41bfeebb8 R11: 0000000000000000 R12: ffffdf06bbd1e8a8 [40914.836422] R13: 0000000000000080 R14: 800000424fd91225 R15: ffffdf07093f6440 [40914.836423] FS: 00007fb60ffff700(0000) GS:ffff9eb4802c0000(0000) knlGS:0000000000000000 [40914.836425] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [40914.836426] CR2: 0000000000000000 CR3: 0000002f220e6002 CR4: 00000000003626e0 [40914.836427] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [40914.836427] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [40914.836428] Call Trace: [40914.836433] follow_page_pte+0x302/0x47b [40914.836437] __get_user_pages+0xf1/0x7d0 [40914.836441] ? irq_work_queue+0x9/0x70 [40914.836443] get_user_pages_unlocked+0x13f/0x1e0 [40914.836469] __gfn_to_pfn_memslot+0x10e/0x400 [kvm] [40914.836486] try_async_pf+0x87/0x240 [kvm] [40914.836503] tdp_page_fault+0x139/0x270 [kvm] [40914.836523] kvm_mmu_page_fault+0x76/0x5e0 [kvm] [40914.836588] vcpu_enter_guest+0xb45/0x1570 [kvm] [40914.836632] kvm_arch_vcpu_ioctl_run+0x35d/0x580 [kvm] [40914.836645] kvm_vcpu_ioctl+0x26e/0x5d0 [kvm] [40914.836650] do_vfs_ioctl+0xa9/0x620 [40914.836653] ksys_ioctl+0x60/0x90 [40914.836654] __x64_sys_ioctl+0x16/0x20 [40914.836658] do_syscall_64+0x5b/0x180 [40914.836664] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [40914.836666] RIP: 0033:0x7fb61cb6bfc7 Signed-off-by: LinFeng <linfeng23@huawei.com> Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:27:46 UTC
9b5e853 Sean Christopherson 24 January 2020, 23:07:22 UTC KVM: x86: Take a u64 when checking for a valid dr7 value Take a u64 instead of an unsigned long in kvm_dr7_valid() to fix a build warning on i386 due to right-shifting a 32-bit value by 32 when checking for bits being set in dr7[63:32]. Alternatively, the warning could be resolved by rewriting the check to use an i386-friendly method, but taking a u64 fixes another oddity on 32-bit KVM. Beause KVM implements natural width VMCS fields as u64s to avoid layout issues between 32-bit and 64-bit, a devious guest can stuff vmcs12->guest_dr7 with a 64-bit value even when both the guest and host are 32-bit kernels. KVM eventually drops vmcs12->guest_dr7[63:32] when propagating vmcs12->guest_dr7 to vmcs02, but ideally KVM would not rely on that behavior for correctness. Cc: Jim Mattson <jmattson@google.com> Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com> Fixes: ecb697d10f70 ("KVM: nVMX: Check GUEST_DR7 on vmentry of nested guests") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:45 UTC
8171cd6 Paolo Bonzini 22 January 2020, 13:36:09 UTC KVM: x86: use raw clock values consistently Commit 53fafdbb8b21f ("KVM: x86: switch KVMCLOCK base to monotonic raw clock") changed kvmclock to use tkr_raw instead of tkr_mono. However, the default kvmclock_offset for the VM was still based on the monotonic clock and, if the raw clock drifted enough from the monotonic clock, this could cause a negative system_time to be written to the guest's struct pvclock. RHEL5 does not like it and (if it boots fast enough to observe a negative time value) it hangs. There is another thing to be careful about: getboottime64 returns the host boot time with tkr_mono frequency, and subtracting the tkr_raw-based kvmclock value will cause the wallclock to be off if tkr_raw drifts from tkr_mono. To avoid this, compute the wallclock delta from the current time instead of being clever and using getboottime64. Fixes: 53fafdbb8b21f ("KVM: x86: switch KVMCLOCK base to monotonic raw clock") Cc: stable@vger.kernel.org Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:45 UTC
917f947 Paolo Bonzini 22 January 2020, 13:32:20 UTC KVM: x86: reorganize pvclock_gtod_data members We will need a copy of tk->offs_boot in the next patch. Store it and cleanup the struct: instead of storing tk->tkr_xxx.base with the tk->offs_boot included, store the raw value in struct pvclock_clock and sum it in do_monotonic_raw and do_realtime. tk->tkr_xxx.xtime_nsec also moves to struct pvclock_clock. While at it, fix a (usually harmless) typo in do_monotonic_raw, which was using gtod->clock.shift instead of gtod->raw_clock.shift. Fixes: 53fafdbb8b21f ("KVM: x86: switch KVMCLOCK base to monotonic raw clock") Cc: stable@vger.kernel.org Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:45 UTC
33aabd0 Miaohe Lin 23 January 2020, 02:08:20 UTC KVM: nVMX: delete meaningless nested_vmx_run() declaration The function nested_vmx_run() declaration is below its implementation. So this is meaningless and should be removed. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:45 UTC
e8ef2a1 Paolo Bonzini 22 January 2020, 16:02:36 UTC KVM: SVM: allow AVIC without split irqchip SVM is now able to disable AVIC dynamically whenever the in-kernel PIT sets up an ack notifier, so we can enable it even if in-kernel IOAPIC/PIC/PIT are in use. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:44 UTC
f458d03 Suravee Suthikulpanit 14 November 2019, 20:15:19 UTC kvm: ioapic: Lazy update IOAPIC EOI In-kernel IOAPIC does not receive EOI with AMD SVM AVIC since the processor accelerate write to APIC EOI register and does not trap if the interrupt is edge-triggered. Workaround this by lazy check for pending APIC EOI at the time when setting new IOPIC irq, and update IOAPIC EOI if no pending APIC EOI. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:44 UTC
1ec2405 Suravee Suthikulpanit 14 November 2019, 20:15:18 UTC kvm: ioapic: Refactor kvm_ioapic_update_eoi() Refactor code for handling IOAPIC EOI for subsequent patch. There is no functional change. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:44 UTC
e2ed407 Suravee Suthikulpanit 14 November 2019, 20:15:16 UTC kvm: i8254: Deactivate APICv when using in-kernel PIT re-injection mode. AMD SVM AVIC accelerates EOI write and does not trap. This causes in-kernel PIT re-injection mode to fail since it relies on irq-ack notifier mechanism. So, APICv is activated only when in-kernel PIT is in discard mode e.g. w/ qemu option: -global kvm-pit.lost_tick_policy=discard Also, introduce APICV_INHIBIT_REASON_PIT_REINJ bit to be used for this reason. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:44 UTC
f3515dc Suravee Suthikulpanit 14 November 2019, 20:15:15 UTC svm: Temporarily deactivate AVIC during ExtINT handling AMD AVIC does not support ExtINT. Therefore, AVIC must be temporary deactivated and fall back to using legacy interrupt injection via vINTR and interrupt window. Also, introduce APICV_INHIBIT_REASON_IRQWIN to be used for this reason. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> [Rename svm_request_update_avic to svm_toggle_avic_for_extint. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:43 UTC
9a0bf05 Suravee Suthikulpanit 14 November 2019, 20:15:14 UTC svm: Deactivate AVIC when launching guest with nested SVM support Since AVIC does not currently work w/ nested virtualization, deactivate AVIC for the guest if setting CPUID Fn80000001_ECX[SVM] (i.e. indicate support for SVM, which is needed for nested virtualization). Also, introduce a new APICV_INHIBIT_REASON_NESTED bit to be used for this reason. Suggested-by: Alexander Graf <graf@amazon.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:43 UTC
f4fdc0a Suravee Suthikulpanit 14 November 2019, 20:15:13 UTC kvm: x86: hyperv: Use APICv update request interface Since disabling APICv has to be done for all vcpus on AMD-based system, adopt the newly introduced kvm_request_apicv_update() interface, and introduce a new APICV_INHIBIT_REASON_HYPERV. Also, remove the kvm_vcpu_deactivate_apicv() since no longer used. Cc: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:43 UTC
6c3e442 Suravee Suthikulpanit 14 November 2019, 20:15:12 UTC svm: Add support for dynamic APICv Add necessary logics to support (de)activate AVIC at runtime. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:42 UTC
2de9d0c Suravee Suthikulpanit 14 November 2019, 20:15:11 UTC kvm: x86: Introduce x86 ops hook for pre-update APICv AMD SVM AVIC needs to update APIC backing page mapping before changing APICv mode. Introduce struct kvm_x86_ops.pre_update_apicv_exec_ctrl function hook to be called prior KVM APICv update request to each vcpu. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:42 UTC
ef8efd7 Suravee Suthikulpanit 14 November 2019, 20:15:10 UTC kvm: x86: Introduce APICv x86 ops for checking APIC inhibit reasons Inibit reason bits are used to determine if APICv deactivation is applicable for a particular hardware virtualization architecture. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:42 UTC
dcbcfa2 Suravee Suthikulpanit 14 November 2019, 20:15:09 UTC KVM: svm: avic: Add support for dynamic setup/teardown of virtual APIC backing page Re-factor avic_init_access_page() to avic_update_access_page() since activate/deactivate AVIC requires setting/unsetting the memory region used for virtual APIC backing page (APIC_ACCESS_PAGE_PRIVATE_MEMSLOT). Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:41 UTC
8937d76 Suravee Suthikulpanit 14 November 2019, 20:15:08 UTC kvm: x86: svm: Add support to (de)activate posted interrupts Introduce interface for (de)activate posted interrupts, and implement SVM hooks to toggle AMD IOMMU guest virtual APIC mode. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:41 UTC
24bbf74 Suravee Suthikulpanit 14 November 2019, 20:15:07 UTC kvm: x86: Add APICv (de)activate request trace points Add trace points when sending request to (de)activate APICv. Suggested-by: Alexander Graf <graf@amazon.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:41 UTC
8df14af Suravee Suthikulpanit 14 November 2019, 20:15:06 UTC kvm: x86: Add support for dynamic APICv activation Certain runtime conditions require APICv to be temporary deactivated during runtime. The current implementation only support run-time deactivation of APICv when Hyper-V SynIC is enabled, which is not temporary. In addition, for AMD, when APICv is (de)activated at runtime, all vcpus in the VM have to operate in the same mode. Thus the requesting vcpu must notify the others. So, introduce the following: * A new KVM_REQ_APICV_UPDATE request bit * Interfaces to request all vcpus to update APICv status * A new interface to update APICV-related parameters for each vcpu Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:41 UTC
7e3e67a Paolo Bonzini 22 January 2020, 15:54:37 UTC KVM: x86: remove get_enable_apicv from kvm_x86_ops It is unused now. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:40 UTC
4e19c36 Suravee Suthikulpanit 14 November 2019, 20:15:05 UTC kvm: x86: Introduce APICv inhibit reason bits There are several reasons in which a VM needs to deactivate APICv e.g. disable APICv via parameter during module loading, or when enable Hyper-V SynIC support. Additional inhibit reasons will be introduced later on when dynamic APICv is supported, Introduce KVM APICv inhibit reason bits along with a new variable, apicv_inhibit_reasons, to help keep track of APICv state for each VM, Initially, the APICV_INHIBIT_REASON_DISABLE bit is used to indicate the case where APICv is disabled during KVM module load. (e.g. insmod kvm_amd avic=0 or insmod kvm_intel enable_apicv=0). Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> [Do not use get_enable_apicv; consider irqchip_split in svm.c. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:40 UTC
b26a695 Suravee Suthikulpanit 14 November 2019, 20:15:04 UTC kvm: lapic: Introduce APICv update helper function Re-factor code into a helper function for setting lapic parameters when activate/deactivate APICv, and export the function for subsequent usage. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 05 February 2020, 14:17:40 UTC
9db0288 Takashi Iwai 05 February 2020, 11:33:45 UTC Merge tag 'asoc-v5.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.6 A collection of updates for bugs fixed since the initial pull request, the most important one being the addition of COMMON_CLK for wcd934x which is needed for MFD to be merged. 05 February 2020, 11:33:45 UTC
13426fe Geert Uytterhoeven 04 February 2020, 13:18:57 UTC ASoC: wcd934x: Add missing COMMON_CLK dependency to SND_SOC_ALL_CODECS Just adding a dependency on COMMON_CLK to SND_SOC_WCD934X is not sufficient, as enabling SND_SOC_ALL_CODECS will still select it, breaking the build later: WARNING: unmet direct dependencies detected for SND_SOC_WCD934X Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMMON_CLK [=n] && MFD_WCD934X [=m] Selected by [m]: - SND_SOC_ALL_CODECS [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMPILE_TEST [=y] && MFD_WCD934X [=m] ... ERROR: "of_clk_add_provider" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined! ERROR: "of_clk_src_simple_get" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined! ERROR: "clk_hw_register" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined! ERROR: "__clk_get_name" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined! Fix this by adding the missing dependency to SND_SOC_ALL_CODECS Fixes: 42b716359beca106 ("ASoC: wcd934x: Add missing COMMON_CLK dependency") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20200204131857.7634-1-geert@linux-m68k.org Signed-off-by: Mark Brown <broonie@kernel.org> 05 February 2020, 10:05:19 UTC
7495e09 Steven Rostedt (VMware) 04 February 2020, 12:33:53 UTC bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline As the bootconfig is appended to the initrd it is not as easy to modify as the kernel command line. If there's some issue with the kernel, and the developer wants to boot a pristine kernel, it should not be needed to modify the initrd to remove the bootconfig for a single boot. As bootconfig is silently added (if the admin does not know where to look they may not know it's being loaded). It should be explicitly added to the kernel cmdline. The loading of the bootconfig is only done if "bootconfig" is on the kernel command line. This will let admins know that the kernel command line is extended. Note, after adding printk()s for when the size is too great or the checksum is wrong, exposed that the current method always looked for the boot config, and if this size and checksum matched, it would parse it (as if either is wrong a printk has been added to show this). It's better to only check this if the boot config is asked to be looked for. Link: https://lore.kernel.org/r/CAHk-=wjfjO+h6bQzrTf=YCZA53Y3EDyAs3Z4gEsT7icA3u_Psw@mail.gmail.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 05 February 2020, 09:22:43 UTC
04dbd86 Rob Herring 31 January 2020, 15:27:12 UTC dt-bindings: Fix paths in schema $id fields The $id path checks were inadequately checking the path part of the $id value. With the check fixed, there's a number of errors that need to be fixed. Most of the errors are including 'bindings/' in the path which should not be as that is considered the root. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: "Nuno Sá" <nuno.sa@analog.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Stefan Popa <stefan.popa@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Marcus Folkesson <marcus.folkesson@gmail.com> Cc: Kent Gustavsson <kent@minoris.se> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-clk@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-input@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> 05 February 2020, 09:14:57 UTC
6992ca0 Linus Torvalds 05 February 2020, 07:29:40 UTC Merge branch 'parisc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "A page table initialization cleanup from Mike Rapoport and regenerated defconfig files from Helge Deller" * 'parisc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Regenerate parisc defconfigs parisc: map_pages(): cleanup page table initialization 05 February 2020, 07:29:40 UTC
51a198e Linus Torvalds 05 February 2020, 05:28:20 UTC Merge tag 'jfs-5.6' of git://github.com/kleikamp/linux-shaggy Pull jfs update from David Kleikamp: "Trivial cleanup for jfs" * tag 'jfs-5.6' of git://github.com/kleikamp/linux-shaggy: jfs: remove unused MAXL2PAGES 05 February 2020, 05:28:20 UTC
72f582f Linus Torvalds 05 February 2020, 05:09:46 UTC Merge branch 'work.recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs recursive removal updates from Al Viro: "We have quite a few places where synthetic filesystems do an equivalent of 'rm -rf', with varying amounts of code duplication, wrong locking, etc. That really ought to be a library helper. Only debugfs (and very similar tracefs) are converted here - I have more conversions, but they'd never been in -next, so they'll have to wait" * 'work.recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: simple_recursive_removal(): kernel-side rm -rf for ramfs-style filesystems 05 February 2020, 05:09:46 UTC
bddea11 Linus Torvalds 05 February 2020, 05:02:42 UTC Merge branch 'imm.timestamp' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs timestamp updates from Al Viro: "More 64bit timestamp work" * 'imm.timestamp' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kernfs: don't bother with timestamp truncation fs: Do not overload update_time fs: Delete timespec64_trunc() fs: ubifs: Eliminate timespec64_trunc() usage fs: ceph: Delete timespec64_trunc() usage fs: cifs: Delete usage of timespec64_trunc fs: fat: Eliminate timespec64_trunc() usage utimes: Clamp the timestamps in notify_change() 05 February 2020, 05:02:42 UTC
2faf852 Jens Axboe 05 February 2020, 02:54:55 UTC io_uring: cleanup fixed file data table references syzbot reports a use-after-free in io_ring_file_ref_switch() when it tries to switch back to percpu mode. When we put the final reference to the table by calling percpu_ref_kill_and_confirm(), we don't want the zero reference to queue async work for flushing the potentially queued up items. We currently do a few flush_work(), but they merely paper around the issue, since the work item may not have been queued yet depending on the when the percpu-ref callback gets run. Coming into the file unregister, we know we have the ring quiesced. io_ring_file_ref_switch() can check for whether or not the ref is dying or not, and not queue anything async at that point. Once the ref has been confirmed killed, flush any potential items manually. Reported-by: syzbot+7caeaea49c2c8a591e3d@syzkaller.appspotmail.com Fixes: 05f3fb3c5397 ("io_uring: avoid ring quiesce for fixed file set unregister and update") Signed-off-by: Jens Axboe <axboe@kernel.dk> 05 February 2020, 03:04:18 UTC
df069d8 Jens Axboe 04 February 2020, 23:48:34 UTC io_uring: spin for sq thread to idle on shutdown As part of io_uring shutdown, we cancel work that is pending and won't necessarily complete on its own. That includes requests like poll commands and timeouts. If we're using SQPOLL for kernel side submission and we shutdown the ring immediately after queueing such work, we can race with the sqthread doing the submission. This means we may miss cancelling some work, which results in the io_uring shutdown hanging forever. Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> 04 February 2020, 23:48:34 UTC
34129bb Dilip Kota 20 December 2019, 09:53:24 UTC dt-bindings: PCI: intel: Fix dt_binding_check compilation failure Remove <dt-bindings/clock/intel,lgm-clk.h> dependency as it is not present in the mainline tree. Use numeric value instead of LGM_GCLK_PCIE10 macro. Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> [robh: Also drop interrupt-parent from example] Signed-off-by: Rob Herring <robh@kernel.org> 04 February 2020, 22:42:20 UTC
4ae87b1 Rob Herring 31 January 2020, 15:25:29 UTC dt-bindings: phy: Fix errors in intel,lgm-emmc-phy example DT labels can't have '-' in them causing a compile failure in the example. Fixing that leads to more warnings: Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:23.13-33: Warning (reg_format): /example-0/chiptop@e0200000/emmc-phy@a8:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:21.33-26.13: Warning (avoid_default_addr_size): /example-0/chiptop@e0200000/emmc-phy@a8: Relying on default #address-cells value Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:21.33-26.13: Warning (avoid_default_addr_size): /example-0/chiptop@e0200000/emmc-phy@a8: Relying on default #size-cells value Fixes: 5bc999108025 ("dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY") Cc: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> Cc: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Rob Herring <robh@kernel.org> 04 February 2020, 22:42:20 UTC
b74e58c Jens Axboe 04 February 2020, 18:29:36 UTC Merge branch 'nvme-5.6' of git://git.infradead.org/nvme into block-5.6 Pull NVMe fixes from Keith. * 'nvme-5.6' of git://git.infradead.org/nvme: nvmet: update AEN list and array at one place nvmet: Fix controller use after free nvmet: Fix error print message at nvmet_install_queue function nvme-pci: remove nvmeq->tags nvmet: fix dsm failure when payload does not match sgl descriptor nvmet: Pass lockdep expression to RCU lists 04 February 2020, 18:29:36 UTC
0f5be6a Daniel Wagner 30 January 2020, 18:29:34 UTC nvmet: update AEN list and array at one place All async events are enqueued via nvmet_add_async_event() which updates the ctrl->async_event_cmds[] array and additionally an struct nvmet_async_event is added to the ctrl->async_events list. Under normal operations the nvmet_async_event_work() updates again the ctrl->async_event_cmds and removes the corresponding struct nvmet_async_event from the list again. Though nvmet_sq_destroy() could be called which calls nvmet_async_events_free() which only updates the ctrl->async_event_cmds[] array. Add new functions nvmet_async_events_process() and nvmet_async_events_free() to process async events, update an array and the list. When we destroy submission queue after clearing the aen present on the ctrl->async list we also loop over ctrl->async_event_cmds[] for any requests posted by the host for which we don't have the AEN in the ctrl->async_events list by calling nvmet_async_event_process() and nvmet_async_events_free(). Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> [chaitanya.kulkarni@wdc.com * Loop over and clear out outstanding requests * Update changelog ] Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> 04 February 2020, 16:56:10 UTC
c7e661a Nikhil Mahale 04 February 2020, 10:27:46 UTC ALSA: hda - Fix DP-MST support for NVIDIA codecs If dyn_pcm_assign is set, different jack objects are being created for pcm and pins. If dyn_pcm_assign is set, generic_hdmi_build_jack() calls into add_hdmi_jack_kctl() to create and track separate jack object for pcm. Like sync_eld_via_acomp(), hdmi_present_sense_via_verbs() also need to report status change of the pcm jack. Rename pin_idx_to_jack() to pin_idx_to_pcm_jack(). Update hdmi_present_sense_via_verbs() to report plug state of pcm jack object. Unlike sync_eld_via_acomp(), for !acomp drivers the pcm jack's plug state must be consistent with plug state of pin's jack. Fixes: 5398e94fb753 ("ALSA: hda - Add DP-MST support for NVIDIA codecs") Reported-and-tested-by: Martin Regner <martin@larkos.de> Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200204102746.1356-1-nmahale@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de> 04 February 2020, 16:16:08 UTC
1a3f540 Israel Rukshin 04 February 2020, 12:38:10 UTC nvmet: Fix controller use after free After nvmet_install_queue() sets sq->ctrl calling to nvmet_sq_destroy() reduces the controller refcount. In case nvmet_install_queue() fails, calling to nvmet_ctrl_put() is done twice (at nvmet_sq_destroy and nvmet_execute_io_connect/nvmet_execute_admin_connect) instead of once for the queue which leads to use after free of the controller. Fix this by set NULL at sq->ctrl in case of a failure at nvmet_install_queue(). The bug leads to the following Call Trace: [65857.994862] refcount_t: underflow; use-after-free. [65858.108304] Workqueue: events nvmet_rdma_release_queue_work [nvmet_rdma] [65858.115557] RIP: 0010:refcount_warn_saturate+0xe5/0xf0 [65858.208141] Call Trace: [65858.211203] nvmet_sq_destroy+0xe1/0xf0 [nvmet] [65858.216383] nvmet_rdma_release_queue_work+0x37/0xf0 [nvmet_rdma] [65858.223117] process_one_work+0x167/0x370 [65858.227776] worker_thread+0x49/0x3e0 [65858.232089] kthread+0xf5/0x130 [65858.235895] ? max_active_store+0x80/0x80 [65858.240504] ? kthread_bind+0x10/0x10 [65858.244832] ret_from_fork+0x1f/0x30 [65858.249074] ---[ end trace f82d59250b54beb7 ]--- Fixes: bb1cc74790eb ("nvmet: implement valid sqhd values in completions") Fixes: 1672ddb8d691 ("nvmet: Add install_queue callout") Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> 04 February 2020, 16:13:09 UTC
0b87a2b Israel Rukshin 04 February 2020, 12:38:09 UTC nvmet: Fix error print message at nvmet_install_queue function Place the arguments in the correct order. Fixes: 1672ddb8d691 ("nvmet: Add install_queue callout") Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> 04 February 2020, 16:13:06 UTC
b9303bb Jason A. Donenfeld 03 February 2020, 21:53:06 UTC x86/PCI: Define to_pci_sysdata() even when !CONFIG_PCI Recently, the to_pci_sysdata() helper was added inside the CONFIG_PCI guard, but it is used inside a CONFIG_NUMA guard, which does not require CONFIG_PCI. This breaks builds on !CONFIG_PCI machines. Make to_pci_sysdata() available in all configurations. Fixes: aad6aa0cd674 ("x86/PCI: Add to_pci_sysdata() helper") Link: https://lore.kernel.org/r/20200203215306.172000-1-Jason@zx2c4.com Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested 04 February 2020, 14:44:46 UTC
c8ab422 Zhiqiang Liu 04 February 2020, 11:30:20 UTC brd: check and limit max_part par In brd_init func, rd_nr num of brd_device are firstly allocated and add in brd_devices, then brd_devices are traversed to add each brd_device by calling add_disk func. When allocating brd_device, the disk->first_minor is set to i * max_part, if rd_nr * max_part is larger than MINORMASK, two different brd_device may have the same devt, then only one of them can be successfully added. when rmmod brd.ko, it will cause oops when calling brd_exit. Follow those steps: # modprobe brd rd_nr=3 rd_size=102400 max_part=1048576 # rmmod brd then, the oops will appear. Oops log: [ 726.613722] Call trace: [ 726.614175] kernfs_find_ns+0x24/0x130 [ 726.614852] kernfs_find_and_get_ns+0x44/0x68 [ 726.615749] sysfs_remove_group+0x38/0xb0 [ 726.616520] blk_trace_remove_sysfs+0x1c/0x28 [ 726.617320] blk_unregister_queue+0x98/0x100 [ 726.618105] del_gendisk+0x144/0x2b8 [ 726.618759] brd_exit+0x68/0x560 [brd] [ 726.619501] __arm64_sys_delete_module+0x19c/0x2a0 [ 726.620384] el0_svc_common+0x78/0x130 [ 726.621057] el0_svc_handler+0x38/0x78 [ 726.621738] el0_svc+0x8/0xc [ 726.622259] Code: aa0203f6 aa0103f7 aa1e03e0 d503201f (7940e260) Here, we add brd_check_and_reset_par func to check and limit max_part par. -- V5->V6: - remove useless code V4->V5:(suggested by Ming Lei) - make sure max_part is not larger than DISK_MAX_PARTS V3->V4:(suggested by Ming Lei) - remove useless change - add one limit of max_part V2->V3: (suggested by Ming Lei) - clear .minors when running out of consecutive minor space in brd_alloc - remove limit of rd_nr V1->V2: - add more checks in brd_check_par_valid as suggested by Ming Lei. Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 04 February 2020, 14:19:33 UTC
33b4013 Linus Torvalds 04 February 2020, 13:32:20 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from David Miller: 1) Use after free in rxrpc_put_local(), from David Howells. 2) Fix 64-bit division error in mlxsw, from Nathan Chancellor. 3) Make sure we clear various bits of TCP state in response to tcp_disconnect(). From Eric Dumazet. 4) Fix netlink attribute policy in cls_rsvp, from Eric Dumazet. 5) txtimer must be deleted in stmmac suspend(), from Nicolin Chen. 6) Fix TC queue mapping in bnxt_en driver, from Michael Chan. 7) Various netdevsim fixes from Taehee Yoo (use of uninitialized data, snapshot panics, stack out of bounds, etc.) 8) cls_tcindex changes hash table size after allocating the table, fix from Cong Wang. 9) Fix regression in the enforcement of session ID uniqueness in l2tp. We only have to enforce uniqueness for IP based tunnels not UDP ones. From Ridge Kennedy. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) gtp: use __GFP_NOWARN to avoid memalloc warning l2tp: Allow duplicate session creation with UDP r8152: Add MAC passthrough support to new device net_sched: fix an OOB access in cls_tcindex qed: Remove set but not used variable 'p_link' tc-testing: add missing 'nsPlugin' to basic.json tc-testing: fix eBPF tests failure on linux fresh clones net: hsr: fix possible NULL deref in hsr_handle_frame() netdevsim: remove unused sdev code netdevsim: use __GFP_NOWARN to avoid memalloc warning netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init() netdevsim: fix panic in nsim_dev_take_snapshot_write() netdevsim: disable devlink reload when resources are being used netdevsim: fix using uninitialized resources bnxt_en: Fix TC queue mapping. bnxt_en: Fix logic that disables Bus Master during firmware reset. bnxt_en: Fix RDMA driver failure with SRIOV after firmware reset. bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected. net: stmmac: Delete txtimer in suspend() ... 04 February 2020, 13:32:20 UTC
d60ddd2 Linus Torvalds 04 February 2020, 13:12:19 UTC Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM updates from Russell King: - decompressor updates - prevention of out-of-bounds access while stacktracing - fix a section mismatch warning with free_memmap() - make kexec depend on MMU to avoid some build errors - remove swapops stubs * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8954/1: NOMMU: remove stubs for swapops ARM: 8952/1: Disable kmemleak on XIP kernels ARM: 8951/1: Fix Kexec compilation issue. ARM: 8949/1: mm: mark free_memmap as __init ARM: 8948/1: Prevent OOB access in stacktrace ARM: 8945/1: decompressor: use CONFIG option instead of cc-option ARM: 8942/1: Revert "8857/1: efi: enable CP15 DMB instructions before cleaning the cache" ARM: 8941/1: decompressor: enable CP15 barrier instructions in v7 cache setup code 04 February 2020, 13:12:19 UTC
71c3a88 Linus Torvalds 04 February 2020, 13:06:46 UTC Merge tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "A pretty small batch for us, and apologies for it being a bit late, I wanted to sneak Christophe's user_access_begin() series in. Summary: - Implement user_access_begin() and friends for our platforms that support controlling kernel access to userspace. - Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx. - Some tweaks to our pseries IOMMU code to allow SVMs ("secure" virtual machines) to use the IOMMU. - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit VDSO, and some other improvements. - A series to use the PCI hotplug framework to control opencapi card's so that they can be reset and re-read after flashing a new FPGA image. As well as other minor fixes and improvements as usual. Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap, Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain" * tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits) powerpc: configs: Cleanup old Kconfig options powerpc/configs/skiroot: Enable some more hardening options powerpc/configs/skiroot: Disable xmon default & enable reboot on panic powerpc/configs/skiroot: Enable security features powerpc/configs/skiroot: Update for symbol movement only powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV powerpc/configs/skiroot: Drop HID_LOGITECH powerpc/configs: Drop NET_VENDOR_HP which moved to staging powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE powerpc/configs: Drop CONFIG_QLGE which moved to staging powerpc: Do not consider weak unresolved symbol relocations as bad powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK powerpc: indent to improve Kconfig readability powerpc: Provide initial documentation for PAPR hcalls powerpc: Implement user_access_save() and user_access_restore() powerpc: Implement user_access_begin and friends powerpc/32s: Prepare prevent_user_access() for user_access_end() powerpc/32s: Drop NULL addr verification powerpc/kuap: Fix set direction in allow/prevent_user_access() powerpc/32s: Fix bad_kuap_fault() ... 04 February 2020, 13:06:46 UTC
153b5c5 Linus Torvalds 04 February 2020, 11:58:07 UTC Merge tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze Pull Microblaze update from Michal Simek: - enable CMA - add support for MB v11 - defconfig updates - minor fixes * tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Add ID for Microblaze v11 microblaze: Prevent the overflow of the start microblaze: Wire CMA allocator asm-generic: Make dma-contiguous.h a mandatory include/asm header microblaze: Sync defconfig with latest Kconfig layout microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 drivers microblaze: Align comments with register usage 04 February 2020, 11:58:07 UTC
7f879e1 Linus Torvalds 04 February 2020, 11:45:21 UTC Merge tag 'ovl-update-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs update from Miklos Szeredi: - Try to preserve holes in sparse files when copying up, thus saving disk space and improving performance. - Fix a performance regression introduced in v4.19 by preserving asynchronicity of IO when fowarding to underlying layers. Add VFS helpers to submit async iocbs. - Fix a regression in lseek(2) introduced in v4.19 that breaks >2G seeks on 32bit kernels. - Fix a corner case where st_ino/st_dev was not preserved across copy up. - Miscellaneous fixes and cleanups. * tag 'ovl-update-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: fix lseek overflow on 32bit ovl: add splice file read write helper ovl: implement async IO routines vfs: add vfs_iocb_iter_[read|write] helper functions ovl: layer is const ovl: fix corner case of non-constant st_dev;st_ino ovl: fix corner case of conflicting lower layer uuid ovl: generalize the lower_fs[] array ovl: simplify ovl_same_sb() helper ovl: generalize the lower_layers[] array ovl: improving copy-up efficiency for big sparse file ovl: use ovl_inode_lock in ovl_llseek() ovl: use pr_fmt auto generate prefix ovl: fix wrong WARN_ON() in ovl_cache_update_ino() 04 February 2020, 11:45:21 UTC
bd5cd35 Taehee Yoo 04 February 2020, 03:24:59 UTC gtp: use __GFP_NOWARN to avoid memalloc warning gtp hashtable size is received by user-space. So, this hashtable size could be too large. If so, kmalloc will internally print a warning message. This warning message is actually not necessary for the gtp module. So, this patch adds __GFP_NOWARN to avoid this message. Splat looks like: [ 2171.200049][ T1860] WARNING: CPU: 1 PID: 1860 at mm/page_alloc.c:4713 __alloc_pages_nodemask+0x2f3/0x740 [ 2171.238885][ T1860] Modules linked in: gtp veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv] [ 2171.262680][ T1860] CPU: 1 PID: 1860 Comm: gtp-link Not tainted 5.5.0+ #321 [ 2171.263567][ T1860] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 2171.264681][ T1860] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740 [ 2171.265332][ T1860] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0 [ 2171.267301][ T1860] RSP: 0018:ffff8880b51af1f0 EFLAGS: 00010246 [ 2171.268320][ T1860] RAX: ffffed1016a35e43 RBX: 0000000000000000 RCX: 0000000000000000 [ 2171.269517][ T1860] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000 [ 2171.270305][ T1860] RBP: 0000000000040cc0 R08: ffffed1018893109 R09: dffffc0000000000 [ 2171.275973][ T1860] R10: 0000000000000001 R11: ffffed1018893108 R12: 1ffff11016a35e43 [ 2171.291039][ T1860] R13: 000000000000000b R14: 000000000000000b R15: 00000000000f4240 [ 2171.292328][ T1860] FS: 00007f53cbc83740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 2171.293409][ T1860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2171.294586][ T1860] CR2: 000055f540014508 CR3: 00000000b49f2004 CR4: 00000000000606e0 [ 2171.295424][ T1860] Call Trace: [ 2171.295756][ T1860] ? mark_held_locks+0xa5/0xe0 [ 2171.296659][ T1860] ? __alloc_pages_slowpath+0x21b0/0x21b0 [ 2171.298283][ T1860] ? gtp_encap_enable_socket+0x13e/0x400 [gtp] [ 2171.298962][ T1860] ? alloc_pages_current+0xc1/0x1a0 [ 2171.299475][ T1860] kmalloc_order+0x22/0x80 [ 2171.299936][ T1860] kmalloc_order_trace+0x1d/0x140 [ 2171.300437][ T1860] __kmalloc+0x302/0x3a0 [ 2171.300896][ T1860] gtp_newlink+0x293/0xba0 [gtp] [ ... ] Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 February 2020, 11:38:50 UTC
0d0d9a3 Ridge Kennedy 03 February 2020, 23:24:00 UTC l2tp: Allow duplicate session creation with UDP In the past it was possible to create multiple L2TPv3 sessions with the same session id as long as the sessions belonged to different tunnels. The resulting sessions had issues when used with IP encapsulated tunnels, but worked fine with UDP encapsulated ones. Some applications began to rely on this behaviour to avoid having to negotiate unique session ids. Some time ago a change was made to require session ids to be unique across all tunnels, breaking the applications making use of this "feature". This change relaxes the duplicate session id check to allow duplicates if both of the colliding sessions belong to UDP encapsulated tunnels. Fixes: dbdbc73b4478 ("l2tp: fix duplicate session creation") Signed-off-by: Ridge Kennedy <ridge.kennedy@alliedtelesis.co.nz> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 February 2020, 11:35:49 UTC
42b7163 Srinivas Kandagatla 04 February 2020, 11:12:41 UTC ASoC: wcd934x: Add missing COMMON_CLK dependency Looks like some platforms are not yet using COMMON CLK. PowerPC allyesconfig failed with below error in next ld: sound/soc/codecs/wcd934x.o:(.toc+0x0): undefined reference to `of_clk_src_simple_get' ld: sound/soc/codecs/wcd934x.o: in function `.wcd934x_codec_probe': wcd934x.c:(.text.wcd934x_codec_probe+0x3d4): undefined reference to `.__clk_get_name' ld: wcd934x.c:(.text.wcd934x_codec_probe+0x438): undefined reference to `.clk_hw_register' ld: wcd934x.c:(.text.wcd934x_codec_probe+0x474): undefined reference to `.of_clk_add_provider' Add the missing COMMON_CLK dependency to fix this errors. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200204111241.6927-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> 04 February 2020, 11:22:30 UTC
b4b771f Kai-Heng Feng 04 February 2020, 05:33:13 UTC r8152: Add MAC passthrough support to new device Device 0xa387 also supports MAC passthrough, therefore add it to the whitelst. BugLink: https://bugs.launchpad.net/bugs/1827961/comments/30 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 February 2020, 10:58:10 UTC
599be01 Cong Wang 03 February 2020, 05:14:35 UTC net_sched: fix an OOB access in cls_tcindex As Eric noticed, tcindex_alloc_perfect_hash() uses cp->hash to compute the size of memory allocation, but cp->hash is set again after the allocation, this caused an out-of-bound access. So we have to move all cp->hash initialization and computation before the memory allocation. Move cp->mask and cp->shift together as cp->hash may need them for computation too. Reported-and-tested-by: syzbot+35d4dea36c387813ed31@syzkaller.appspotmail.com Fixes: 331b72922c5f ("net: sched: RCU cls_tcindex") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 February 2020, 10:41:36 UTC
6aa71ef Michal Simek 14 January 2020, 13:42:51 UTC microblaze: Add ID for Microblaze v11 List Microblaze v11 from PVR. Signed-off-by: Michal Simek <michal.simek@xilinx.com> 04 February 2020, 10:38:59 UTC
061d2c1 Shubhrajyoti Datta 11 January 2020, 13:14:34 UTC microblaze: Prevent the overflow of the start In case the start + cache size is more than the max int the start overflows. Prevent the same. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 04 February 2020, 10:38:59 UTC
back to top