https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
ea4a0ce Merge git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Fix bounds checking in ioapic indirect register reads (CVE-2013-1798) KVM: x86: Convert MSR_KVM_SYSTEM_TIME to use gfn_to_hva_cache functions (CVE-2013-1797) KVM: x86: fix for buffer overflow in handling of MSR_KVM_SYSTEM_TIME (CVE-2013-1796) KVM: x86: fix deadlock in clock-in-progress request handling KVM: allow host header to be included even for !CONFIG_KVM 20 March 2013, 01:24:12 UTC
ce7d363 md/raid5: schedule_construction should abort if nothing to do. Since commit 1ed850f356a0a422013846b5291acff08815008b md/raid5: make sure to_read and to_write never go negative. It has been possible for handle_stripe_dirtying to be called when there isn't actually any work to do. It then calls schedule_reconstruction() which will set R5_LOCKED on the parity block(s) even when nothing else is happening. This then causes problems in do_release_stripe(). So add checks to schedule_reconstruction() so that if it doesn't find anything to do, it just aborts. This bug was introduced in v3.7, so the patch is suitable for -stable kernels since then. Cc: stable@vger.kernel.org (v3.7+) Reported-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> 20 March 2013, 01:16:51 UTC
8f27d48 target/pscsi: Reject cross page boundary case in pscsi_map_sg We can only have one page of data in each sg element, so we can not cross a page boundary. Fail this case. The 'while (len > 0 && data_len > 0) {}' loop is not necessary. The loop can only be executed once. Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 20 March 2013, 00:31:14 UTC
f002a24 target/file: Bump FD_MAX_SECTORS to 2048 to handle 1M sized I/Os This patch bumps the default FILEIO backend FD_MAX_SECTORS value from 1024 -> 2048 in order to allow block_size=512 to handle 1M sized I/Os. The current default rejects I/Os larger than 512K in sbc_parse_cdb(): [12015.915146] SCSI OP 2ah with too big sectors 1347 exceeds backend hw_max_sectors: 1024 [12015.977744] SCSI OP 2ah with too big sectors 2048 exceeds backend hw_max_sectors: 1024 This issue is present in >= v3.5 based kernels, introduced after the removal of se_task logic. Reported-by: Viljami Ilola <azmulx@netikka.fi> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 20 March 2013, 00:24:28 UTC
c12aba5 drm/i915: stop using GMBUS IRQs on Gen4 chips Commit 28c70f162 ("drm/i915: use the gmbus irq for waits") switched to using GMBUS irqs instead of GPIO bit-banging for chipset generations 4 and above. It turns out though that on many systems this leads to spurious interrupts being generated, long after the register write to disable the IRQs has been issued. Typically this results in the spurious interrupt source getting disabled: [ 9.636345] irq 16: nobody cared (try booting with the "irqpoll" option) [ 9.637915] Pid: 4157, comm: ifup Tainted: GF 3.9.0-rc2-00341-g0863702 #422 [ 9.639484] Call Trace: [ 9.640731] <IRQ> [<ffffffff8109b40d>] __report_bad_irq+0x1d/0xc7 [ 9.640731] [<ffffffff8109b7db>] note_interrupt+0x15b/0x1e8 [ 9.640731] [<ffffffff810999f7>] handle_irq_event_percpu+0x1bf/0x214 [ 9.640731] [<ffffffff81099a88>] handle_irq_event+0x3c/0x5c [ 9.640731] [<ffffffff8109c139>] handle_fasteoi_irq+0x7a/0xb0 [ 9.640731] [<ffffffff8100400e>] handle_irq+0x1a/0x24 [ 9.640731] [<ffffffff81003d17>] do_IRQ+0x48/0xaf [ 9.640731] [<ffffffff8142f1ea>] common_interrupt+0x6a/0x6a [ 9.640731] <EOI> [<ffffffff8142f952>] ? system_call_fastpath+0x16/0x1b [ 9.640731] handlers: [ 9.640731] [<ffffffffa000d771>] usb_hcd_irq [usbcore] [ 9.640731] [<ffffffffa0306189>] yenta_interrupt [yenta_socket] [ 9.640731] Disabling IRQ #16 The really curious thing is now that irq 16 is _not_ the interrupt for the i915 driver when using MSI, but it _is_ the interrupt when not using MSI. So by all indications it seems like gmbus is able to generate a legacy (shared) interrupt in MSI mode on some configurations. I've tried to reproduce this and the differentiating thing seems to be that on unaffected systems no other device uses irq 16 (which seems to be the non-MSI intel gfx interrupt on all gm45). I have no idea how that even can happen. To avoid tempting this elephant into a rage, just disable gmbus interrupt support on gen 4. v2: Improve the commit message with exact details of what's going on. Also add a comment in the code to warn against this particular elephant in the room. v3: Move the comment explaing how gen4 blows up next to the definition of HAS_GMBUS_IRQ to keep the code-flow straight. Suggested by Chris Wilson. Signed-off-by: Jiri Kosina <jkosina@suse.cz> (v1) Acked-by: Chris Wilson <chris@chris-wilson.co.uk> References: https://lkml.org/lkml/2013/3/8/325 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 19 March 2013, 23:03:16 UTC
10b3866 Merge tag 'for-linus-v3.9-rc4' of git://oss.sgi.com/xfs/xfs Pull XFS fixes from Ben Myers: - Fix for a potential infinite loop which was introduced in commit 4d559a3bcb73 ("xfs: limit speculative prealloc near ENOSPC thresholds") - Fix for the return type of xfs_iomap_eof_prealloc_initial_size from commit a1e16c26660b ("xfs: limit speculative prealloc size on sparse files") - Fix for a failed buffer readahead causing subsequent callers to fail incorrectly * tag 'for-linus-v3.9-rc4' of git://oss.sgi.com/xfs/xfs: xfs: ensure we capture IO errors correctly xfs: fix xfs_iomap_eof_prealloc_initial_size type xfs: fix potential infinite loop in xfs_iomap_prealloc_size() 19 March 2013, 22:17:40 UTC
547b524 PCI: Use ROM images from firmware only if no other ROM source available Mantas Mikulėnas reported that his graphics hardware failed to initialise after commit f9a37be0f02a ("x86: Use PCI setup data"). The aim of this commit was to ensure that ROM images were available on some Apple systems that don't expose the GPU ROM via any other source. In this case, UEFI appears to have provided a broken ROM image that we were using even though there was a perfectly valid ROM available via other sources. The simplest way to handle this seems to be to just re-order pci_map_rom() and leave any firmare-supplied ROM to last. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Tested-by: Mantas Mikulėnas <grawity@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 March 2013, 21:51:14 UTC
5c7c336 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull sparc fixes from David Miller: "Just some minor fixups, a sunsu console setup panic cure, and recognition of a Fujitsu sun4v cpu." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: remove unused "config BITS" sparc: delete "if !ULTRA_HAS_POPULATION_COUNT" sparc64: correctly recognize SPARC64-X chips sparc,leon: fix GRPCI2 device0 PCI config space access sunsu: Fix panic in case of nonexistent port at "console=ttySY" cmdline option 19 March 2013, 21:47:11 UTC
e748962 Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 fixes from Catalin Marinas: - Fix !SMP build error. - Fix padding computation in struct ucontext (no ABI change). - Minor clean-up after the signal patches (unused var). - Two old Kconfig options clean-up. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS arm64: Do not select GENERIC_HARDIRQS_NO_DEPRECATED arm64: fix padding computation in struct ucontext arm64: Fix build error with !SMP arm64: Removed unused variable in compat_setup_rt_frame() 19 March 2013, 20:56:18 UTC
f58b20b sparc: remove unused "config BITS" sparc's asm/module.h got removed in commit 786d35d45cc40b2a51a18f73e14e135d47fdced7 ("Make most arch asm/module.h files use asm-generic/module.h"). That removed the only two uses of this Kconfig symbol. So we can remove its entry too. > >From arch/sparc/Makefile: > ifeq ($(CONFIG_SPARC32),y) > [...] > > [...] > export BITS := 32 > [...] > > else > [...] > > [...] > export BITS := 64 > [...] > > So $(BITS) is set depending on whether CONFIG_SPARC32 is set or not. > Using $(BITS) in sparc's Makefiles is not using CONFIG_BITS. That > doesn't count as usage of "config BITS". Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2013, 20:23:51 UTC
7b1b3fd Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix ARM BPF JIT handling of negative 'k' values, from Chen Gang. 2) Insufficient space reserved for bridge netlink values, fix from Stephen Hemminger. 3) Some dst_neigh_lookup*() callers don't interpret error pointer correctly, fix from Zhouyi Zhou. 4) Fix transport match in SCTP active_path loops, from Xugeng Zhang. 5) Fix qeth driver handling of multi-order SKB frags, from Frank Blaschka. 6) fec driver is missing napi_disable() call, resulting in crashes on unload, from Georg Hofmann. 7) Don't try to handle PMTU events on a listening socket, fix from Eric Dumazet. 8) Fix timestamp location calculations in IP option processing, from David Ward. 9) FIB_TABLE_HASHSZ setting is not controlled by the correct kconfig tests, from Denis V Lunev. 10) Fix TX descriptor push handling in SFC driver, from Ben Hutchings. 11) Fix isdn/hisax and tulip/de4x5 kconfig dependencies, from Arnd Bergmann. 12) bnx2x statistics don't handle 4GB rollover correctly, fix from Maciej Żenczykowski. 13) Openvswitch bug fixes for vport del/new error reporting, missing genlmsg_end() call in netlink processing, and mis-parsing of LLC/SNAP ethernet types. From Rich Lane. 14) SKB pfmemalloc state should only be propagated from the head page of a compound page, fix from Pavel Emelyanov. 15) Fix link handling in tg3 driver for 5715 chips when autonegotation is disabled. From Nithin Sujir. 16) Fix inverted test of cpdma_check_free_tx_desc return value in davinci_emac driver, from Mugunthan V N. 17) vlan_depth is incorrectly calculated in skb_network_protocol(), from Li RongQing. 18) Fix probing of Gobi 1K devices in qmi_wwan driver, and fix NCM device mode backwards compat in cdc_ncm driver. From Bjørn Mork. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) inet: limit length of fragment queue hash table bucket lists qeth: Fix scatter-gather regression qeth: Fix invalid router settings handling qeth: delay feature trace tcp: dont handle MTU reduction on LISTEN socket bnx2x: fix occasional statistics off-by-4GB error vhost/net: fix heads usage of ubuf_info bridge: Add support for setting BR_ROOT_BLOCK flag. bnx2x: add missing napi deletion in error path drivers: net: ethernet: ti: davinci_emac: fix usage of cpdma_check_free_tx_desc() ethernet/tulip: DE4x5 needs VIRT_TO_BUS isdn: hisax: netjet requires VIRT_TO_BUS net: cdc_ncm, cdc_mbim: allow user to prefer NCM for backwards compatibility rtnetlink: Mask the rta_type when range checking Revert "ip_gre: make ipgre_tunnel_xmit() not parse network header as IP unconditionally" Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug smsc75xx: configuration help incorrectly mentions smsc95xx net: fec: fix missing napi_disable call net: fec: restart the FEC when PHY speed changes skb: Propagate pfmemalloc on skb from head page only ... 19 March 2013, 20:20:51 UTC
e0b2029 sparc: delete "if !ULTRA_HAS_POPULATION_COUNT" Commit 2d78d4beb64eb07d50665432867971c481192ebf ("[PATCH] bitops: sparc64: use generic bitops") made the default of GENERIC_HWEIGHT depend on !ULTRA_HAS_POPULATION_COUNT. But since there's no Kconfig symbol with that name, this always evaluates to true. Delete this dependency. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2013, 20:16:39 UTC
a2c118b KVM: Fix bounds checking in ioapic indirect register reads (CVE-2013-1798) If the guest specifies a IOAPIC_REG_SELECT with an invalid value and follows that with a read of the IOAPIC_REG_WINDOW KVM does not properly validate that request. ioapic_read_indirect contains an ASSERT(redir_index < IOAPIC_NUM_PINS), but the ASSERT has no effect in non-debug builds. In recent kernels this allows a guest to cause a kernel oops by reading invalid memory. In older kernels (pre-3.3) this allows a guest to read from large ranges of host memory. Tested: tested against apic unit tests. Signed-off-by: Andrew Honig <ahonig@google.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> 19 March 2013, 17:20:21 UTC
0b79459 KVM: x86: Convert MSR_KVM_SYSTEM_TIME to use gfn_to_hva_cache functions (CVE-2013-1797) There is a potential use after free issue with the handling of MSR_KVM_SYSTEM_TIME. If the guest specifies a GPA in a movable or removable memory such as frame buffers then KVM might continue to write to that address even after it's removed via KVM_SET_USER_MEMORY_REGION. KVM pins the page in memory so it's unlikely to cause an issue, but if the user space component re-purposes the memory previously used for the guest, then the guest will be able to corrupt that memory. Tested: Tested against kvmclock unit test Signed-off-by: Andrew Honig <ahonig@google.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> 19 March 2013, 17:17:35 UTC
c300aa6 KVM: x86: fix for buffer overflow in handling of MSR_KVM_SYSTEM_TIME (CVE-2013-1796) If the guest sets the GPA of the time_page so that the request to update the time straddles a page then KVM will write onto an incorrect page. The write is done byusing kmap atomic to get a pointer to the page for the time structure and then performing a memcpy to that page starting at an offset that the guest controls. Well behaved guests always provide a 32-byte aligned address, however a malicious guest could use this to corrupt host kernel memory. Tested: Tested against kvmclock unit test. Signed-off-by: Andrew Honig <ahonig@google.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> 19 March 2013, 17:17:31 UTC
7920720 arm64: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS The Kconfig entry for DEBUG_ERRORS is a verbatim copy of the former arm entry for that symbol. It got removed in v2.6.39 because it wasn't actually used anywhere. There are still no users of DEBUG_ERRORS so remove this entry too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> [catalin.marinas@arm.com: removed option from defconfig] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 19 March 2013, 16:19:19 UTC
63b7743 arm64: Do not select GENERIC_HARDIRQS_NO_DEPRECATED Config option GENERIC_HARDIRQS_NO_DEPRECATED was removed in commit 78c89825649a9a5ed526c507603196f467d781a5 ("genirq: Remove the now obsolete config options and select statements"), but the select was accidentally reintroduced in commit 8c2c3df31e3b87cb5348e48776c366ebd1dc5a7a ("arm64: Build infrastructure"). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 19 March 2013, 15:39:46 UTC
5a3da1f inet: limit length of fragment queue hash table bucket lists This patch introduces a constant limit of the fragment queue hash table bucket list lengths. Currently the limit 128 is choosen somewhat arbitrary and just ensures that we can fill up the fragment cache with empty packets up to the default ip_frag_high_thresh limits. It should just protect from list iteration eating considerable amounts of cpu. If we reach the maximum length in one hash bucket a warning is printed. This is implemented on the caller side of inet_frag_find to distinguish between the different users of inet_fragment.c. I dropped the out of memory warning in the ipv4 fragment lookup path, because we already get a warning by the slab allocator. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jesper Dangaard Brouer <jbrouer@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2013, 14:28:36 UTC
271648b qeth: Fix scatter-gather regression This patch fixes a scatter-gather regression introduced with commit 5640f768 net: use a per task frag allocator Now the qeth driver can cope with bigger framents and split a fragment in sub framents if required. Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2013, 14:09:40 UTC
82e2e78 qeth: Fix invalid router settings handling Give a bad return code when specifying a router setting that is either invalid or not support on the respective device type. In addition, fall back the previous setting instead of silently switching back to 'no routing'. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2013, 14:09:40 UTC
82f77cf qeth: delay feature trace Delay tracing of the card features until the optional commands have been enabled. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2013, 14:09:40 UTC
f60b6e7 drm/nv50/kms: prevent lockdep false-positive in page flipping path Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 19 March 2013, 05:26:38 UTC
4fa1339 drm/nouveau/core: fix return value of nouveau_object_del() Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 19 March 2013, 05:26:30 UTC
112ccff Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon fixes from Jean Delvare. * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (lm75) Fix tcn75 prefix hwmon: (lm75.h) Update header inclusion MAINTAINERS: Remove Mark M. Hoffman 19 March 2013, 01:49:42 UTC
9997d08 sgy-cts1000: Remove __dev* attributes Somehow the driver snuck in with these still in it. Signed-off-by: Ben Collins <ben.c@servergy.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 March 2013, 01:49:10 UTC
b63dc12 Merge branch 'for-3.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fix from Tejun Heo: "Lai's patch to fix highly unlikely but still possible workqueue stall during CPU hotunplug." * 'for-3.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: fix possible pool stall bug in wq_unbind_fn() 19 March 2013, 01:47:07 UTC
2726e20 Merge tag 'for-usb-linus-2013-03-18' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus Sarah writes: xHCI bug fix for 3.9 Hi Greg, Here's one xHCI bug fix. We had two register bits flipped. Sarah Sharp 18 March 2013, 22:56:05 UTC
72c7753 tcm_vhost: Flush vhost_work in vhost_scsi_flush() We also need to flush the vhost_works. It is the completion vhost_work currently. Signed-off-by: Asias He <asias@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 18 March 2013, 21:34:49 UTC
038e0af tcm_vhost: Add missed lock in vhost_scsi_clear_endpoint() tv_tpg->tv_tpg_vhost_count should be protected by tv_tpg->tv_tpg_mutex. Signed-off-by: Asias He <asias@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 18 March 2013, 21:34:35 UTC
c09664b KVM: x86: fix deadlock in clock-in-progress request handling There is a deadlock in pvclock handling: cpu0: cpu1: kvm_gen_update_masterclock() kvm_guest_time_update() spin_lock(pvclock_gtod_sync_lock) local_irq_save(flags) spin_lock(pvclock_gtod_sync_lock) kvm_make_mclock_inprogress_request(kvm) make_all_cpus_request() smp_call_function_many() Now if smp_call_function_many() called by cpu0 tries to call function on cpu1 there will be a deadlock. Fix by moving pvclock_gtod_sync_lock protected section outside irq disabled section. Analyzed by Gleb Natapov <gleb@redhat.com> Acked-by: Gleb Natapov <gleb@redhat.com> Reported-and-Tested-by: Yongjie Ren <yongjie.ren@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> 18 March 2013, 21:03:39 UTC
f445f11 KVM: allow host header to be included even for !CONFIG_KVM The new context tracking subsystem unconditionally includes kvm_host.h headers for the guest enter/exit macros. This causes a compile failure when KVM is not enabled. Fix by adding an IS_ENABLED(CONFIG_KVM) check to kvm_host so it can be included/compiled even when KVM is not enabled. Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> 18 March 2013, 21:03:03 UTC
25eba81 hwmon: (lm75) Fix tcn75 prefix The TCN75 has its own prefix for a long time now. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> 18 March 2013, 20:19:49 UTC
5a4c060 hwmon: (lm75.h) Update header inclusion File lm75.h used to include <linux/hwmon.h> for SENSORS_LIMIT() but this function is gone by now. Instead we call clamp_val() so we should include <linux/kernel.h>, where this function is declared. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> 18 March 2013, 20:19:49 UTC
9487754 MAINTAINERS: Remove Mark M. Hoffman Mark M. Hoffman stopped working on the Linux kernel several years ago, so he should no longer be listed as a driver maintainer. I'm not even sure if his e-mail address still works. I can take over 3 drivers he was responsible for, the 4th one will fall down to the subsystem maintainer. Also give Mark credit for all the good work he did. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: Wolfram Sang <wolfram@the-dreams.de> 18 March 2013, 20:19:49 UTC
0fb889b target: fix possible memory leak in core_tpg_register() 'se_tpg->tpg_lun_list' is malloced in core_tpg_register() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. 'se_tpg' is malloced out of this function, and will be freed if we return error, so remove free for 'se_tpg'. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 18 March 2013, 19:45:52 UTC
7ac9ad1 target/iscsi: Fix mutual CHAP auth on big-endian arches See https://bugzilla.redhat.com/show_bug.cgi?id=916290 Used a temp var since we take its address in sg_init_one. Signed-off-by: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 18 March 2013, 19:31:21 UTC
882e3f8 target_core_sbc: use noop for SYNCHRONIZE_CACHE Windows does not expect SYNCHRONIZE_CACHE to be not supported, and will generate a BSOD upon shutdown when using rd_mcp backend. So better use a noop here. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 18 March 2013, 19:31:16 UTC
e001873 xfs: ensure we capture IO errors correctly Failed buffer readahead can leave the buffer in the cache marked with an error. Most callers that then issue a subsequent read on the buffer do not zero the b_error field out, and so we may incorectly detect an error during IO completion due to the stale error value left on the buffer. Avoid this problem by zeroing the error before IO submission. This ensures that the only IO errors that are detected those captured from are those captured from bio submission or completion. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit c163f9a1760229a95d04e37b332de7d5c1c225cd) 18 March 2013, 18:39:10 UTC
3325bee xfs: fix xfs_iomap_eof_prealloc_initial_size type Fix the return type of xfs_iomap_eof_prealloc_initial_size() to xfs_fsblock_t to reflect the fact that the return value may be an unsigned 64 bits if XFS_BIG_BLKNOS is defined. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit e8108cedb1c5d1dc359690d18ca997e97a0061d2) 18 March 2013, 18:38:50 UTC
83cdadd xfs: fix potential infinite loop in xfs_iomap_prealloc_size() If freesp == 0, we could end up in an infinite loop while squashing the preallocation. Break the loop when we've killed the prealloc entirely. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit e78c420bfc2608bb5f9a0b9165b1071c1e31166a) 18 March 2013, 18:30:38 UTC
0d4f060 tcp: dont handle MTU reduction on LISTEN socket When an ICMP ICMP_FRAG_NEEDED (or ICMPV6_PKT_TOOBIG) message finds a LISTEN socket, and this socket is currently owned by the user, we set TCP_MTU_REDUCED_DEFERRED flag in listener tsq_flags. This is bad because if we clone the parent before it had a chance to clear the flag, the child inherits the tsq_flags value, and next tcp_release_cb() on the child will decrement sk_refcnt. Result is that we might free a live TCP socket, as reported by Dormando. IPv4: Attempt to release TCP socket in state 1 Fix this issue by testing sk_state against TCP_LISTEN early, so that we set TCP_MTU_REDUCED_DEFERRED on appropriate sockets (not a LISTEN one) This bug was introduced in commit 563d34d05786 (tcp: dont drop MTU reduction indications) Reported-by: dormando <dormando@rydia.net> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2013, 17:31:28 UTC
b009aac bnx2x: fix occasional statistics off-by-4GB error The UPDATE_QSTAT function introduced on February 15, 2012 in commit 1355b704b9ba "bnx2x: consistent statistics after internal driver reload" incorrectly fails to handle overflow during addition of the lower 32-bit field of a stat. This bug is present since 3.4-rc1 and should thus be considered a candidate for stable 3.4+ releases. Google-Bug-Id: 8374428 Signed-off-by: Maciej Żenczykowski <maze@google.com> Cc: Mintz Yuval <yuvalmin@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2013, 17:12:20 UTC
039eb75 ALSA: hda - Fix yet missing GPIO/EAPD setup in cirrus driver I forgot to update spec->gpio_data in the automute hook, so it will be overridden at the init sequence, thus the machine is still silent when no headphone jack is plugged at boot time. Signed-off-by: Takashi Iwai <tiwai@suse.de> 18 March 2013, 15:55:49 UTC
0e40110 ext4: fix memory leakage in mext_check_coverage Regression was introduced by following commit 8c854473 TESTCASE (git://oss.sgi.com/xfs/cmds/xfstests.git): #while true;do ./check 301 || break ;done Also fix potential memory leakage in get_ext_path() once ext4_ext_find_extent() have failed. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> 18 March 2013, 15:40:19 UTC
35f8c76 Merge tag 'for-linus-20130318' of git://git.infradead.org/linux-mtd Pull MTD fixes from David Woodhouse: "This fixes a couple of problems. Firstly, some people are actually still using old small-page flash and we broke it by removing the ready check. Secondly. fix the handling of partitions on Broadcom 47xx devices. Recent changes had made it misdetect the location of the NVRAM and scribble over the bootloader when it tried to update the variables there. With predictably sad results." * tag 'for-linus-20130318' of git://git.infradead.org/linux-mtd: mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDY mtd: bcm47xxpart: look for NVRAM at the end of device Revert "mtd: bcm47xxpart: improve probing of nvram partition" 18 March 2013, 15:27:41 UTC
4b76715 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull selinux bugfix from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: use GFP_ATOMIC under spin_lock 18 March 2013, 15:26:15 UTC
f826434 USB: xhci - fix bit definitions for IMAN register According to XHCI specification (5.5.2.1) the IP is bit 0 and IE is bit 1 of IMAN register. Previously their definitions were reversed. Even though there are no ill effects being observed from the swapped definitions (because IMAN_IP is RW1C and in legacy PCI case we come in with it already set to 1 so it was clearing itself even though we were setting IMAN_IE instead of IMAN_IP), we should still correct the values. This patch should be backported to kernels as old as 2.6.36, that contain the commit 4e833c0b87a30798e67f06120cecebef6ee9644c "xhci: don't re-enable IE constantly". Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org 18 March 2013, 15:25:13 UTC
991657a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A couple of bug fixes, the most hairy on is the flush_tlb_kernel_range fix. Another case of "how could this ever have worked?"." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/kdump: Do not add standby memory for kdump drivers/i2c: remove !S390 dependency, add missing GENERIC_HARDIRQS dependencies s390/scm: process availability s390/scm_blk: suspend writes s390/scm_drv: extend notify callback s390/scm_blk: fix request number accounting s390/mm: fix flush_tlb_kernel_range() s390/mm: fix vmemmap size calculation s390: critical section cleanup vs. machine checks 18 March 2013, 15:19:13 UTC
1c6ba37 Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC bug fixes from Arnd Bergmann: "Things are calming down for arm-soc as well. This set of bug fixes is dominated in size by the at91 platform bug fixes. Some of them were meant to go through the framebuffer tree during the merge window, but since the framebuffer maintainer could not be reached, I offered to take them here. The other notable at91 change is the addition of pinctrl definitions to fix the NAND controller. The rest are mostly simple regression fixes: - Our removal of VIRT_TO_BUS conflicted with Stephen Rothwell's renaming of the Kconfig symbol. You will get a trivial merge conflict here, we still want to remove it. - missing bits for clocks on imx and s5pv210 - missing header inclusions in mmp and shmobile - typos in s5pv210 camera and vt8500 clock support code and three trivial fixes for pre-3.8 bugs: - an old bogus build warning in the joystick driver - a misleading Kconfig description - a NULL pointer check on davinci" * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: fix CONFIG_VIRT_TO_BUS handling ARM: i.MX35: enable MAX clock ARM: Scorpion is a v7 architecture, not v6 ARM: mmp: add platform_device head file in gplugd input/joystick: use get_cycles on ARM [media] s5p-fimc: fix s5pv210 build clk: vt8500: Fix "fix device clock divisor calculations" ARM: i.MX25: Fix DT compilation ARM: at91: fix infinite loop in at91_irq_suspend/resume ARM: at91: add gpio suspend/resume support when using pinctrl ARM: at91: fix LCD-wiring mode atmel_lcdfb: fix 16-bpp modes on older SOCs ARM: at91: dt: at91sam9x5: complete NAND pinctrl ARM: at91: dt: at91sam9x5: correct NAND pins comments ARM: davinci: edma: fix dmaengine induced null pointer dereference on da830 ARM: shmobile: marzen: Include mmc/host.h ARM: EXYNOS: Add #dma-cells for generic dma binding support for PL330 ARM: S5PV210: Fix PL330 DMA controller clkdev entries 18 March 2013, 15:17:14 UTC
a15cd06 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "Here's a few powerpc fixes for 3.9, mostly regressions (though not all from 3.9 merge window) that we've been hammering into shape over the last couple of weeks. They fix booting on Cell and G5 among other things (yes, we've been a bit sloppy with older machines this time around)." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Rename USER_ESID_BITS* to ESID_BITS* powerpc: Update kernel VSID range powerpc: Make VSID_BITS* dependency explicit powerpc: Make sure that we alays include CONFIG_BINFMT_ELF powerpc/ptrace: Fix brk.len used uninitialised powerpc: Fix -mcmodel=medium breakage in prom_init.c powerpc: Remove last traces of POWER4_ONLY powerpc: Fix cputable entry for 970MP rev 1.0 powerpc: Fix STAB initialization 18 March 2013, 15:12:41 UTC
6210d42 Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm Pull ARM fixes from Russell King: "Just three fixes this time - a fix for a fix for our memset function, fixing the dummy clockevent so that it doesn't interfere with real hardware clockevents, and fixing a build error for Tegra." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7675/1: amba: tegra-ahb: Fix build error w/ PM_SLEEP w/o PM_RUNTIME ARM: 7674/1: smp: Avoid dummy clockevent being preferred over real hardware clock-event ARM: 7670/1: fix the memset fix 18 March 2013, 15:11:53 UTC
b4811ba ARM: fix CONFIG_VIRT_TO_BUS handling 887cbce0 "arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS" and 4febd95a8 "Select VIRT_TO_BUS directly where needed" from Stephen Rothwell changed globally how CONFIG_VIRT_TO_BUS is selected, while my own a5d533ee0 "ARM: disable virt_to_bus/ virt_to_bus almost everywhere" was merged at the same time and changed which platforms select it on ARM. The result of this conflict was that we again see CONFIG_VIRT_TO_BUS on all ARM systems. This patch fixes up the problem and removes CONFIG_ARCH_NO_VIRT_TO_BUS again on ARM. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> 18 March 2013, 13:49:57 UTC
4502403 selinux: use GFP_ATOMIC under spin_lock The call tree here is: sk_clone_lock() <- takes bh_lock_sock(newsk); xfrm_sk_clone_policy() __xfrm_sk_clone_policy() clone_policy() <- uses GFP_ATOMIC for allocations security_xfrm_policy_clone() security_ops->xfrm_policy_clone_security() selinux_xfrm_policy_clone() Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Signed-off-by: James Morris <james.l.morris@oracle.com> 18 March 2013, 13:33:09 UTC
ace71f4 Merge tag 'renesas-fixes-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes From Simon Horman <horms@verge.net.au>: Resolve a build failure present since v3.9-rc1 * tag 'renesas-fixes-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: marzen: Include mmc/host.h Signed-off-by: Arnd Bergmann <arnd@arndb.de> 18 March 2013, 10:54:01 UTC
18931c8 arm64: fix padding computation in struct ucontext The expression to compute the padding needed to fill the uc_sigmask field to 1024 bits actually computes the padding needed for 1080 bits. Fortunately, due to the 16-byte alignment of the following field (uc_mcontext) the definition in glibc contains enough bytes of padding after uc_sigmask so that the overall offsets and size match in both definitions. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 18 March 2013, 10:42:16 UTC
a2c9154 arm64: Fix build error with !SMP The __atomic_hash is only defined when SMP is enabled but the arm64ksyms.c exports it even for the UP case. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 18 March 2013, 10:42:14 UTC
362132d MAINTAINERS: intel-gfx is no longer subscribers-only It is though still filtered for non-subscribers, but without pissing off people with moderation queue spam. So drop the subscribers-only tag to make getmaintainers.pl tdrt. Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 18 March 2013, 10:27:13 UTC
9d1a455 drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n() The eDP output on HP Z1 is still broken when X is started even after fixing the infinite link-train loop. The regression was introduced in 3.6 kernel for cleaning up the mode clock handling code in intel_dp.c by the commit [71244653: drm/i915: adjusted_mode->clock in the dp mode_fix]. In the past, the clock of the reference mode was modified in intel_dp_mode_fixup() in the case of eDP fixed clock, and this clock was used for calculating in intel_dp_set_m_n(). This override was removed, thus the wrong mode clock is used for the calculation, resulting in a psychedelic smoking output in the end. This patch corrects the clock to be used in the place. v1->v2: Use intel_edp_target_clock() for checking eDP fixed clock instead of open code as in ironlake_set_m_n(). Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 18 March 2013, 10:25:36 UTC
0d96724 arm64: Removed unused variable in compat_setup_rt_frame() Recent clean-up of the compat signal code left an unused 'stack' variable. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 18 March 2013, 10:12:56 UTC
a86b1a2 ALSA: hda/cirrus - Fix the digital beep registration The argument passed to snd_hda_attach_beep_device() is a widget NID while spec->beep_amp holds the composed value for amp controls. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 18 March 2013, 10:00:44 UTC
fd4a5ae perf/x86: Add SNB/SNB-EP scheduling constraints for cycle_activity event Add scheduling constraints for SNB/SNB-EP CYCLE_ACTIVITY event as defined by SDM Jan 2013 edition. The STALLS umasks are combinations with the NO_DISPATCH umask. Signed-off-by: Stephane Eranian <eranian@gmail.com> Cc: peterz@infradead.org Cc: ak@linux.intel.com Cc: jolsa@redhat.com Link: http://lkml.kernel.org/r/20130317134957.GA8550@quad Signed-off-by: Ingo Molnar <mingo@kernel.org> 18 March 2013, 09:23:13 UTC
9a556ab kprobes/x86: Check Interrupt Flag modifier when registering probe Currently kprobes check whether the copied instruction modifies IF (interrupt flag) on each probe hit. This results not only in introducing overhead but also involving inat_get_opcode_attribute into the kprobes hot path, and it can cause an infinite recursive call (and kernel panic in the end). Actually, since the copied instruction itself can never be modified on the buffer, it is needless to analyze the instruction on every probe hit. To fix this issue, we check it only once when registering probe and store the result on ainsn->if_modifier. Reported-by: Timo Juhani Lindfors <timo.lindfors@iki.fi> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: yrl.pp-manager.tt@hitachi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20130314115242.19690.33573.stgit@mhiramat-M0-7522 Signed-off-by: Ingo Molnar <mingo@kernel.org> 18 March 2013, 09:21:23 UTC
65c1055 kprobes: Make hash_64() as always inlined Because hash_64() is called from the get_kprobe() inside int3 handler, kernel causes int3 recursion and crashes if kprobes user puts a probe on it. Usually hash_64() is inlined into caller function, but in some cases, it has instances by gcc's interprocedural constant propagation. This patch uses __always_inline instead of inline to prevent gcc from doing such things. Reported-by: Timo Juhani Lindfors <timo.lindfors@iki.fi> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Nadia Yvette Chambers <nyc@holomorphy.com> Cc: yrl.pp-manager.tt@hitachi.com Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20130314115230.19690.39387.stgit@mhiramat-M0-7522 Signed-off-by: Ingo Molnar <mingo@kernel.org> 18 March 2013, 09:21:23 UTC
31b6945 ALSA: hda - Fix missing beep detach in patch_conexant.c This leaks the beep input device after module unload, which leads to Oops. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=55321 Signed-off-by: Takashi Iwai <tiwai@suse.de> 18 March 2013, 09:06:41 UTC
a0bf225 Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: . perf probe: Fix segfault due to testing the wrong pointer for NULL, from Ananth N Mavinakayanahalli. . libtraceevent: Remove hard coded include to /usr/local/include in Makefile, which causes cross builds to include host header files, fix from Jack Mitchell. . perf record: Use the right target interface for synthesizing threads when --cpu/-C option is used, fix from Jiri Olsa. . Check if -DFORTIFY_SOURCE=2 is allowed, as gcc 4.7.2 defines it and then the build is broken when it is redefined in perf, fix from Marcin Slusarz. . Fix build with NO_NEWT=1, that can happen explicitely or when the newt-devel package is not installed, from Michael Ellerman. . perf/POWER7: Create a sysfs format entry for Power7 events, missing patch from a patchseries already merged, from Sukadev Bhattiprolu. . Fix LIBNUMA build with glibc 2.12 and older, from Vinson Lee. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> 18 March 2013, 09:00:56 UTC
1f1b396 Merge branch 'tip/perf/urgent-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/urgent Pull tracing fixes from Steven Rostedt. Signed-off-by: Ingo Molnar <mingo@kernel.org> 18 March 2013, 08:48:29 UTC
d610d98 perf: Generate EXIT event only once per task context perf_event_task_event() iterates pmu list and generate events for each eligible pmu context. But if task_event has task_ctx like in EXIT it'll generate events even though the pmu doesn't have an eligible one. Fix it by moving the code to proper places. Before this patch: $ perf record -n true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.006 MB perf.data (~248 samples) ] $ perf report -D | tail Aggregated stats: TOTAL events: 73 MMAP events: 67 COMM events: 2 EXIT events: 4 cycles stats: TOTAL events: 73 MMAP events: 67 COMM events: 2 EXIT events: 4 After this patch: $ perf report -D | tail Aggregated stats: TOTAL events: 70 MMAP events: 67 COMM events: 2 EXIT events: 1 cycles stats: TOTAL events: 70 MMAP events: 67 COMM events: 2 EXIT events: 1 Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1363332433-7637-1-git-send-email-namhyung@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 18 March 2013, 08:47:33 UTC
06d9db7 usb: musb: gadget: do *unmap_dma_buffer* only for valid DMA addr musb does not use DMA buffer for ep0 but it uses the same giveback function *musb_g_giveback* for all endpoints (*musb_g_ep0_giveback* calls *musb_g_giveback*). So for ep0 case request.dma will be '0' and will result in kernel OOPS if tried to *unmap_dma_buffer* for requests in ep0. Fixed it by doing *unmap_dma_buffer* only for valid DMA addr and checking that musb_ep->dma is valid when unmapping. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 18 March 2013, 08:18:28 UTC
778141e perf: Reset hwc->last_period on sw clock events When cpu/task clock events are initialized, their sampling frequencies are converted to have a fixed value. However it missed to update the hwc->last_period which was set to 1 for initial sampling frequency calibration. Because this hwc->last_period value is used as a period in perf_swevent_ hrtime(), every recorded sample will have an incorrected period of 1. $ perf record -e task-clock noploop 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.158 MB perf.data (~6919 samples) ] $ perf report -n --show-total-period --stdio # Samples: 4K of event 'task-clock' # Event count (approx.): 4000 # # Overhead Samples Period Command Shared Object Symbol # ........ ............ ............ ....... ............. .................. # 99.95% 3998 3998 noploop noploop [.] main 0.03% 1 1 noploop libc-2.15.so [.] init_cacheinfo 0.03% 1 1 noploop ld-2.15.so [.] open_verify Note that it doesn't affect the non-sampling event so that the perf stat still gets correct value with or without this patch. $ perf stat -e task-clock noploop 1 Performance counter stats for 'noploop 1': 1000.272525 task-clock # 1.000 CPUs utilized 1.000560605 seconds time elapsed Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1363574507-18808-1-git-send-email-namhyung@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 18 March 2013, 08:15:18 UTC
804ca90 drm/nouveau/hwmon: do not expose a buggy temperature if it is unavailable Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 18 March 2013, 01:15:27 UTC
0b3ee37 drm/nouveau/therm: display the availability of the internal sensor Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 18 March 2013, 01:15:27 UTC
bf55eb8 drm/nouveau/therm: disable temperature management if the sensor isn't readable Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 18 March 2013, 01:15:27 UTC
98ee7c7 drm/nouveau/therm: disable auto fan management if temperature is not available Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 18 March 2013, 01:15:27 UTC
76c0295 drm/nv40/therm: reserve negative temperatures for errors Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 18 March 2013, 01:15:27 UTC
ad40d73 drm/nv40/therm: disable temperature reading if the bios misses some parameters Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 18 March 2013, 01:15:27 UTC
13506e2 drm/nouveau/therm-ic: the temperature is off by sensor_constant, warn the user Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 18 March 2013, 01:15:26 UTC
c4ce924 drm/nouveau/therm: remove some confusion introduced by therm_mode The kernel message "[ PTHERM][0000:01:00.0] Thermal management: disabled" is misleading as it actually means "fan management: disabled". This patch fixes both the source and the message to improve readability. Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 18 March 2013, 01:15:26 UTC
7591782 drm/nouveau/therm: do not make assumptions on temperature In nouveau_therm_sensor_event, temperature is stored as an uint8_t even though the original interface returns an int. This change should make it more obvious when the sensor is either very-ill-calibrated or when we selected the wrong sensor style on the nv40 family. Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 18 March 2013, 01:15:26 UTC
eea4eb1 drm/nv40/therm: increase the sensor's settling delay to 20ms Based on my experience, 10ms wasn't always enough. Let's bump that to a little more. If this turns out to be insufficient-enough again, then an approach based on letting the sensor settle for several seconds before starting polling on the temperature would be better suited. This way, boot time wouldn't be impacted by those waits too much. Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 18 March 2013, 01:15:26 UTC
7ae9712 drm/nv40/therm: improve selection between the old and the new style The condition to select between the old and new style was a thinko as rnndb orders chipsets based on their release date (or general chronologie hw-wise) and not based on their chipset number. As the nv40 family is a mess when it comes to numbers, this patch introduces a switch-based selection between the old and new style. Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 18 March 2013, 01:15:26 UTC
a937536 Linux 3.9-rc3 17 March 2013, 22:59:32 UTC
6c4d3bc perf,x86: fix link failure for non-Intel configs Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") introduces a link failure since perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL: arch/x86/power/built-in.o: In function `restore_processor_state': (.text+0x45c): undefined reference to `perf_restore_debug_store' Fix it by defining the dummy function appropriately. Signed-off-by: David Rientjes <rientjes@google.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 17 March 2013, 22:59:15 UTC
2a6e06b perf,x86: fix wrmsr_on_cpu() warning on suspend/resume Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") fixed a crash when doing PEBS performance profiling after resuming, but in using init_debug_store_on_cpu() to restore the DS_AREA mtrr it also resulted in a new WARN_ON() triggering. init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU cross-calls to do the MSR update. Which is not really valid at the early resume stage, and the warning is quite reasonable. Now, it all happens to _work_, for the simple reason that smp_call_function_single() ends up just doing the call directly on the CPU when the CPU number matches, but we really should just do the wrmsr() directly instead. This duplicates the wrmsr() logic, but hopefully we can just remove the wrmsr_on_cpu() version eventually. Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 17 March 2013, 22:44:43 UTC
3b4f819 Revert "drm/i915: try to train DP even harder" This reverts commit 0d71068835e2610576d369d6d4cbf90e0f802a71. Not only that the commit introduces a bogus check (voltage_tries == 5 will never meet at the inserted code path), it brings the i915 driver into an endless dp-train loop on HP Z1 desktop machine with IVY+eDP. At least reverting this commit recovers the framebuffer (but X is still broken by other reasons...) Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 17 March 2013, 21:57:46 UTC
46aa92d vhost/net: fix heads usage of ubuf_info ubuf info allocator uses guest controlled head as an index, so a malicious guest could put the same head entry in the ring twice, and we will get two callbacks on the same value. To fix use upend_idx which is guaranteed to be unique. Reported-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> 17 March 2013, 18:28:54 UTC
0863702 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Eric's rcu barrier patch fixes a long standing problem with our unmount code hanging on to devices in workqueue helpers. Liu Bo nailed down a difficult assertion for in-memory extent mappings." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix warning of free_extent_map Btrfs: fix warning when creating snapshots Btrfs: return as soon as possible when edquot happens Btrfs: return EIO if we have extent tree corruption btrfs: use rcu_barrier() to wait for bdev puts at unmount Btrfs: remove btrfs_try_spin_lock Btrfs: get better concurrency for snapshot-aware defrag work 17 March 2013, 18:04:14 UTC
3d84fa9 bridge: Add support for setting BR_ROOT_BLOCK flag. Most of the support was already there. The only thing that was missing was the call to set the flag. Add this call. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 March 2013, 16:41:29 UTC
722c6f5 bnx2x: add missing napi deletion in error path If the hardware initialization fails in bnx2x_nic_load() after adding napi objects, they would not be deleted. A subsequent attempt to unload the bnx2x module detects a corruption in the napi list. Add the missing napi deletion to the error path. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 March 2013, 16:26:52 UTC
c62dce6 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== On the NFC bits, Samuel says: "With this one we have: - A fix for properly decreasing socket ack log. - A timer and works cleanup upon NFC device removal. - A monitoroing socket cleanup round from llcp_socket_release. - A proper error report to pending sockets upon NFC device removal." Regarding the Bluetooth bits, Gustavo says: "I have these two patches for 3.9, these add support for two more devices to the bluetooth drivers." Along with those, we have a few wireless driver fixes... Bing Zhao provides an mwifiex to prevent an out-of-bounds memory access. John Crispin offers a Kconfig fix to enable some otherwise dead code in rt2x00. The correct symbols were added in -rc1 through a different tree, but the symbols for enabling the wireless driver didn't match. Larry Finger brings an rtlwifi fix for a scheduling while atomic bug, and another fix for a reassociation problem caused by failing to clear the BSSID after a disconnect. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 17 March 2013, 16:26:18 UTC
75b9b61 drivers: net: ethernet: ti: davinci_emac: fix usage of cpdma_check_free_tx_desc() Fix which was done in the following commit in cpsw driver has to be taken forward to davinci emac driver as well. commit d35162f89b8f00537d7b240b76d2d0e8b8d29aa0 Author: Daniel Mack <zonque@gmail.com> Date: Tue Mar 12 06:31:19 2013 +0000 net: ethernet: cpsw: fix usage of cpdma_check_free_tx_desc() Commit fae50823d0 ("net: ethernet: davinci_cpdma: Add boundary for rx and tx descriptors") introduced a function to check the current allocation state of tx packets. The return value is taken into account to stop the netqork queue on the adapter in case there are no free slots. However, cpdma_check_free_tx_desc() returns 'true' if there is room in the bitmap, not 'false', so the usage of the function is wrong. Reported-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 March 2013, 16:18:44 UTC
db0b827 ethernet/tulip: DE4x5 needs VIRT_TO_BUS The automated ARM build tests have shown that the tulip de4x5 driver uses the old-style virt_to_bus() interface on some architectures. Alpha, Sparc and PowerPC did not hit this problem, because they use a different code path, and most other architectures actually do provide VIRT_TO_BUS. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> 17 March 2013, 16:01:10 UTC
8008f6e isdn: hisax: netjet requires VIRT_TO_BUS Disabling CONFIG_VIRT_TO_BUS on ARM showed that the hisax netjet driver depends on this deprecated functionality but is not marked so in Kconfig. Rather than adding ARM to the already long list of architectures that this driver is broken on, this patch adds 'depends on VIRT_TO_BUS' and removes the dependency on !SPARC, which is also implied by that. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> 17 March 2013, 16:01:10 UTC
1e8bbe6 net: cdc_ncm, cdc_mbim: allow user to prefer NCM for backwards compatibility commit bd329e1 ("net: cdc_ncm: do not bind to NCM compatible MBIM devices") introduced a new policy, preferring MBIM for dual NCM/MBIM functions if the cdc_mbim driver was enabled. This caused a regression for users wanting to use NCM. Devices implementing NCM backwards compatibility according to section 3.2 of the MBIM v1.0 specification allow either NCM or MBIM on a single USB function, using different altsettings. The cdc_ncm and cdc_mbim drivers will both probe such functions, and must agree on a common policy for selecting either MBIM or NCM. Until now, this policy has been set at build time based on CONFIG_USB_NET_CDC_MBIM. Use a module parameter to set the system policy at runtime, allowing the user to prefer NCM on systems with the cdc_mbim driver. Cc: Greg Suarez <gsuarez@smithmicro.com> Cc: Alexey Orishko <alexey.orishko@stericsson.com> Reported-by: Geir Haatveit <nospam@haatveit.nu> Reported-by: Tommi Kyntola <kynde@ts.ray.fi> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54791 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> 17 March 2013, 15:59:03 UTC
a5b8db9 rtnetlink: Mask the rta_type when range checking Range/validity checks on rta_type in rtnetlink_rcv_msg() do not account for flags that may be set. This causes the function to return -EINVAL when flags are set on the type (for example NLA_F_NESTED). Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 17 March 2013, 15:43:40 UTC
9ad477a ALSA: documentation: Fix typo in Documentation/sound Correct spelling typos in Documentation/sound/alsa Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 17 March 2013, 09:12:13 UTC
8c6216d Revert "ip_gre: make ipgre_tunnel_xmit() not parse network header as IP unconditionally" This reverts commit 412ed94744d16806fbec3bd250fd94e71cde5a1f. The commit is wrong as tiph points to the outer IPv4 header which is installed at ipgre_header() and not the inner one which is protocol dependant. This commit broke succesfully opennhrp which use PF_PACKET socket with ETH_P_NHRP protocol. Additionally ssl_addr is set to the link-layer IPv4 address. This address is written by ipgre_header() to the skb earlier, and this is the IPv4 header tiph should point to - regardless of the inner protocol payload. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net> 17 March 2013, 03:00:41 UTC
af81d78 powerpc: Rename USER_ESID_BITS* to ESID_BITS* Now we use ESID_BITS of kernel address to build proto vsid. So rename USER_ESIT_BITS to ESID_BITS Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> [v3.8] 17 March 2013, 01:45:44 UTC
c60ac56 powerpc: Update kernel VSID range This patch change the kernel VSID range so that we limit VSID_BITS to 37. This enables us to support 64TB with 65 bit VA (37+28). Without this patch we have boot hangs on platforms that only support 65 bit VA. With this patch we now have proto vsid generated as below: We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated from mmu context id and effective segment id of the address. For user processes max context id is limited to ((1ul << 19) - 5) for kernel space, we use the top 4 context ids to map address as below 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ] 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ] 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ] 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ] Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Tested-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> [v3.8] 17 March 2013, 01:39:06 UTC
e39d1a4 powerpc: Make VSID_BITS* dependency explicit VSID_BITS and VSID_BITS_1T depends on the context bits and user esid bits. Make the dependency explicit Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> [v3.8] 17 March 2013, 01:38:15 UTC
d812c0e powerpc: Make sure that we alays include CONFIG_BINFMT_ELF Our kernel is not much good without BINFMT_ELF and this fixes a build warning on 64 bit allnoconfig builds: warning: (COMPAT) selects COMPAT_BINFMT_ELF which has unmet direct dependencies (COMPAT && BINFMT_ELF) Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 17 March 2013, 01:35:09 UTC
back to top