Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
b20cb60 hayeswang 20 March 2017, 08:13:45 UTC r8152: fix the rx early size of RTL8153 revert commit a59e6d815226 ("r8152: correct the rx early size") and fix the rx early size as (rx buffer size - rx packet size - rx desc size - alignment) / 4 Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 March 2017, 17:50:36 UTC
210c4f7 hayeswang 20 March 2017, 08:13:44 UTC r8152: set the RMS of RTL8153 according to the mtu Set the received maximum size (RMS) according to the mtu size. It is unnecessary to receive a packet which is more than the size we could transmit. Besides, this could let the rx buffer be used effectively. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 March 2017, 17:50:36 UTC
a05d4fd Tejun Heo 14 March 2017, 23:25:56 UTC cgroup, net_cls: iterate the fds of only the tasks which are being migrated The net_cls controller controls the classid field of each socket which is associated with the cgroup. Because the classid is per-socket attribute, when a task migrates to another cgroup or the configured classid of the cgroup changes, the controller needs to walk all sockets and update the classid value, which was implemented by 3b13758f51de ("cgroups: Allow dynamically changing net_classid"). While the approach is not scalable, migrating tasks which have a lot of fds attached to them is rare and the cost is born by the ones initiating the operations. However, for simplicity, both the migration and classid config change paths call update_classid() which scans all fds of all tasks in the target css. This is an overkill for the migration path which only needs to cover a much smaller subset of tasks which are actually getting migrated in. On cgroup v1, this can lead to unexpected scalability issues when one tries to migrate a task or process into a net_cls cgroup which already contains a lot of fds. Even if the migration traget doesn't have many to get scanned, update_classid() ends up scanning all fds in the target cgroup which can be extremely numerous. Unfortunately, on cgroup v2 which doesn't use net_cls, the problem is even worse. Before bfc2cf6f61fc ("cgroup: call subsys->*attach() only for subsystems which are actually affected by migration"), cgroup core would call the ->css_attach callback even for controllers which don't see actual migration to a different css. As net_cls is always disabled but still mounted on cgroup v2, whenever a process is migrated on the cgroup v2 hierarchy, net_cls sees identity migration from root to root and cgroup core used to call ->css_attach callback for those. The net_cls ->css_attach ends up calling update_classid() on the root net_cls css to which all processes on the system belong to as the controller isn't used. This makes any cgroup v2 migration O(total_number_of_fds_on_the_system) which is horrible and easily leads to noticeable stalls triggering RCU stall warnings and so on. The worst symptom is already fixed in upstream by bfc2cf6f61fc ("cgroup: call subsys->*attach() only for subsystems which are actually affected by migration"); however, backporting that commit is too invasive and we want to avoid other cases too. This patch updates net_cls's cgrp_attach() to iterate fds of only the processes which are actually getting migrated. This removes the surprising migration cost which is dependent on the total number of fds in the target cgroup. As this leaves write_classid() the only user of update_classid(), open-code the helper into write_classid(). Reported-by: David Goode <dgoode@fb.com> Fixes: 3b13758f51de ("cgroups: Allow dynamically changing net_classid") Cc: stable@vger.kernel.org # v4.4+ Cc: Nina Schiff <ninasc@fb.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 22 March 2017, 17:32:46 UTC
f0c0cb9 Jon Mason 21 March 2017, 20:51:19 UTC arm64: dts: NS2: Add dma-coherent to relevant DT entries Cache related issues with DMA rings and performance issues related to caching are being caused by not properly setting the "dma-coherent" flag in the device tree entries. Adding it here to correct the issue. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Fixes: fd5e5dd56 ("arm64: dts: Add PCIe0 and PCIe4 DT nodes for NS2") Fixes: dddc3c9d7 ("arm64: dts: NS2: add AMAC ethernet support") Fixes: e79249143 ("arm64: dts: Add Broadcom Northstar2 device tree entries for PDC driver") Fixes: ac9aae00f ("arm64: dts: Add SATA3 AHCI and SATA3 PHY DT nodes for NS2") Fixes: efc877676 ("arm64: dts: Add SDHCI DT node for NS2") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> 22 March 2017, 17:14:14 UTC
afd0e5a Neeraj Upadhyay 22 March 2017, 11:38:25 UTC arm64: kaslr: Fix up the kernel image alignment If kernel image extends across alignment boundary, existing code increases the KASLR offset by size of kernel image. The offset is masked after resizing. There are cases, where after masking, we may still have kernel image extending across boundary. This eventually results in only 2MB block getting mapped while creating the page tables. This results in data aborts while accessing unmapped regions during second relocation (with kaslr offset) in __primary_switch. To fix this problem, round up the kernel image size, by swapper block size, before adding it for correction. For example consider below case, where kernel image still crosses 1GB alignment boundary, after masking the offset, which is fixed by rounding up kernel image size. SWAPPER_TABLE_SHIFT = 30 Swapper using section maps with section size 2MB. CONFIG_PGTABLE_LEVELS = 3 VA_BITS = 39 _text : 0xffffff8008080000 _end : 0xffffff800aa1b000 offset : 0x1f35600000 mask = ((1UL << (VA_BITS - 2)) - 1) & ~(SZ_2M - 1) (_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7c (_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d offset after existing correction (before mask) = 0x1f37f9b000 (_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d (_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d offset (after mask) = 0x1f37e00000 (_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7c (_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d new offset w/ rounding up = 0x1f38000000 (_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d (_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR") Cc: <stable@vger.kernel.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org> Signed-off-by: Srinivas Ramana <sramana@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com> 22 March 2017, 15:43:11 UTC
9d3a4de Robin Murphy 16 March 2017, 17:00:16 UTC iommu: Disambiguate MSI region types The introduction of reserved regions has left a couple of rough edges which we could do with sorting out sooner rather than later. Since we are not yet addressing the potential dynamic aspect of software-managed reservations and presenting them at arbitrary fixed addresses, it is incongruous that we end up displaying hardware vs. software-managed MSI regions to userspace differently, especially since ARM-based systems may actually require one or the other, or even potentially both at once, (which iommu-dma currently has no hope of dealing with at all). Let's resolve the former user-visible inconsistency ASAP before the ABI has been baked into a kernel release, in a way that also lays the groundwork for the latter shortcoming to be addressed by follow-up patches. For clarity, rename the software-managed type to IOMMU_RESV_SW_MSI, use IOMMU_RESV_MSI to describe the hardware type, and document everything a little bit. Since the x86 MSI remapping hardware falls squarely under this meaning of IOMMU_RESV_MSI, apply that type to their regions as well, so that we tell the same story to userspace across all platforms. Secondly, as the various region types require quite different handling, and it really makes little sense to ever try combining them, convert the bitfield-esque #defines to a plain enum in the process before anyone gets the wrong impression. Fixes: d30ddcaa7b02 ("iommu: Add a new type field in iommu_resv_region") Reviewed-by: Eric Auger <eric.auger@redhat.com> CC: Alex Williamson <alex.williamson@redhat.com> CC: David Woodhouse <dwmw2@infradead.org> CC: kvm@vger.kernel.org Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> 22 March 2017, 15:16:17 UTC
cd37a29 Marek Szyprowski 20 March 2017, 09:17:57 UTC iommu/exynos: Workaround FLPD cache flush issues for SYSMMU v5 For some unknown reasons, in some cases, FLPD cache invalidation doesn't work properly with SYSMMU v5 controllers found in Exynos5433 SoCs. This can be observed by a firmware crash during initialization phase of MFC video decoder available in the mentioned SoCs when IOMMU support is enabled. To workaround this issue perform a full TLB/FLPD invalidation in case of replacing any first level page descriptors in case of SYSMMU v5. Fixes: 740a01eee9ada ("iommu/exynos: Add support for v5 SYSMMU") CC: stable@vger.kernel.org # v4.10+ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> 22 March 2017, 14:50:45 UTC
7d2aa6b Marek Szyprowski 20 March 2017, 09:17:56 UTC iommu/exynos: Block SYSMMU while invalidating FLPD cache Documentation specifies that SYSMMU should be in blocked state while performing TLB/FLPD cache invalidation, so add needed calls to sysmmu_block/unblock. Fixes: 66a7ed84b345d ("iommu/exynos: Apply workaround of caching fault page table entries") CC: stable@vger.kernel.org # v4.10+ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> 22 March 2017, 14:50:32 UTC
95a4960 Ming Lei 22 March 2017, 02:14:43 UTC blk-mq: don't complete un-started request in timeout handler When iterating busy requests in timeout handler, if the STARTED flag of one request isn't set, that means the request is being processed in block layer or driver, and isn't submitted to hardware yet. In current implementation of blk_mq_check_expired(), if the request queue becomes dying, un-started requests are handled as being completed/freed immediately. This way is wrong, and can cause rq corruption or double allocation[1][2], when doing I/O and removing&resetting NVMe device at the sametime. This patch fixes several issues reported by Yi Zhang. [1]. oops log 1 [ 581.789754] ------------[ cut here ]------------ [ 581.789758] kernel BUG at block/blk-mq.c:374! [ 581.789760] invalid opcode: 0000 [#1] SMP [ 581.789761] Modules linked in: vfat fat ipmi_ssif intel_rapl sb_edac edac_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm nvme irqbypass crct10dif_pclmul nvme_core crc32_pclmul ghash_clmulni_intel intel_cstate ipmi_si mei_me ipmi_devintf intel_uncore sg ipmi_msghandler intel_rapl_perf iTCO_wdt mei iTCO_vendor_support mxm_wmi lpc_ich dcdbas shpchp pcspkr acpi_power_meter wmi nfsd auth_rpcgss nfs_acl lockd dm_multipath grace sunrpc ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ahci libahci crc32c_intel tg3 libata megaraid_sas i2c_core ptp fjes pps_core dm_mirror dm_region_hash dm_log dm_mod [ 581.789796] CPU: 1 PID: 1617 Comm: kworker/1:1H Not tainted 4.10.0.bz1420297+ #4 [ 581.789797] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.2.5 09/06/2016 [ 581.789804] Workqueue: kblockd blk_mq_timeout_work [ 581.789806] task: ffff8804721c8000 task.stack: ffffc90006ee4000 [ 581.789809] RIP: 0010:blk_mq_end_request+0x58/0x70 [ 581.789810] RSP: 0018:ffffc90006ee7d50 EFLAGS: 00010202 [ 581.789811] RAX: 0000000000000001 RBX: ffff8802e4195340 RCX: ffff88028e2f4b88 [ 581.789812] RDX: 0000000000001000 RSI: 0000000000001000 RDI: 0000000000000000 [ 581.789813] RBP: ffffc90006ee7d60 R08: 0000000000000003 R09: ffff88028e2f4b00 [ 581.789814] R10: 0000000000001000 R11: 0000000000000001 R12: 00000000fffffffb [ 581.789815] R13: ffff88042abe5780 R14: 000000000000002d R15: ffff88046fbdff80 [ 581.789817] FS: 0000000000000000(0000) GS:ffff88047fc00000(0000) knlGS:0000000000000000 [ 581.789818] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 581.789819] CR2: 00007f64f403a008 CR3: 000000014d078000 CR4: 00000000001406e0 [ 581.789820] Call Trace: [ 581.789825] blk_mq_check_expired+0x76/0x80 [ 581.789828] bt_iter+0x45/0x50 [ 581.789830] blk_mq_queue_tag_busy_iter+0xdd/0x1f0 [ 581.789832] ? blk_mq_rq_timed_out+0x70/0x70 [ 581.789833] ? blk_mq_rq_timed_out+0x70/0x70 [ 581.789840] ? __switch_to+0x140/0x450 [ 581.789841] blk_mq_timeout_work+0x88/0x170 [ 581.789845] process_one_work+0x165/0x410 [ 581.789847] worker_thread+0x137/0x4c0 [ 581.789851] kthread+0x101/0x140 [ 581.789853] ? rescuer_thread+0x3b0/0x3b0 [ 581.789855] ? kthread_park+0x90/0x90 [ 581.789860] ret_from_fork+0x2c/0x40 [ 581.789861] Code: 48 85 c0 74 0d 44 89 e6 48 89 df ff d0 5b 41 5c 5d c3 48 8b bb 70 01 00 00 48 85 ff 75 0f 48 89 df e8 7d f0 ff ff 5b 41 5c 5d c3 <0f> 0b e8 71 f0 ff ff 90 eb e9 0f 1f 40 00 66 2e 0f 1f 84 00 00 [ 581.789882] RIP: blk_mq_end_request+0x58/0x70 RSP: ffffc90006ee7d50 [ 581.789889] ---[ end trace bcaf03d9a14a0a70 ]--- [2]. oops log2 [ 6984.857362] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 6984.857372] IP: nvme_queue_rq+0x6e6/0x8cd [nvme] [ 6984.857373] PGD 0 [ 6984.857374] [ 6984.857376] Oops: 0000 [#1] SMP [ 6984.857379] Modules linked in: ipmi_ssif vfat fat intel_rapl sb_edac edac_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_si iTCO_wdt iTCO_vendor_support mxm_wmi ipmi_devintf intel_cstate sg dcdbas intel_uncore mei_me intel_rapl_perf mei pcspkr lpc_ich ipmi_msghandler shpchp acpi_power_meter wmi nfsd auth_rpcgss dm_multipath nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect crc32c_intel sysimgblt fb_sys_fops ttm nvme drm nvme_core ahci libahci i2c_core tg3 libata ptp megaraid_sas pps_core fjes dm_mirror dm_region_hash dm_log dm_mod [ 6984.857416] CPU: 7 PID: 1635 Comm: kworker/7:1H Not tainted 4.10.0-2.el7.bz1420297.x86_64 #1 [ 6984.857417] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.2.5 09/06/2016 [ 6984.857427] Workqueue: kblockd blk_mq_run_work_fn [ 6984.857429] task: ffff880476e3da00 task.stack: ffffc90002e90000 [ 6984.857432] RIP: 0010:nvme_queue_rq+0x6e6/0x8cd [nvme] [ 6984.857433] RSP: 0018:ffffc90002e93c50 EFLAGS: 00010246 [ 6984.857434] RAX: 0000000000000000 RBX: ffff880275646600 RCX: 0000000000001000 [ 6984.857435] RDX: 0000000000000fff RSI: 00000002fba2a000 RDI: ffff8804734e6950 [ 6984.857436] RBP: ffffc90002e93d30 R08: 0000000000002000 R09: 0000000000001000 [ 6984.857437] R10: 0000000000001000 R11: 0000000000000000 R12: ffff8804741d8000 [ 6984.857438] R13: 0000000000000040 R14: ffff880475649f80 R15: ffff8804734e6780 [ 6984.857439] FS: 0000000000000000(0000) GS:ffff88047fcc0000(0000) knlGS:0000000000000000 [ 6984.857440] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6984.857442] CR2: 0000000000000010 CR3: 0000000001c09000 CR4: 00000000001406e0 [ 6984.857443] Call Trace: [ 6984.857451] ? mempool_free+0x2b/0x80 [ 6984.857455] ? bio_free+0x4e/0x60 [ 6984.857459] blk_mq_dispatch_rq_list+0xf5/0x230 [ 6984.857462] blk_mq_process_rq_list+0x133/0x170 [ 6984.857465] __blk_mq_run_hw_queue+0x8c/0xa0 [ 6984.857467] blk_mq_run_work_fn+0x12/0x20 [ 6984.857473] process_one_work+0x165/0x410 [ 6984.857475] worker_thread+0x137/0x4c0 [ 6984.857478] kthread+0x101/0x140 [ 6984.857480] ? rescuer_thread+0x3b0/0x3b0 [ 6984.857481] ? kthread_park+0x90/0x90 [ 6984.857489] ret_from_fork+0x2c/0x40 [ 6984.857490] Code: 8b bd 70 ff ff ff 89 95 50 ff ff ff 89 8d 58 ff ff ff 44 89 95 60 ff ff ff e8 b7 dd 12 e1 8b 95 50 ff ff ff 48 89 85 68 ff ff ff <4c> 8b 48 10 44 8b 58 18 8b 8d 58 ff ff ff 44 8b 95 60 ff ff ff [ 6984.857511] RIP: nvme_queue_rq+0x6e6/0x8cd [nvme] RSP: ffffc90002e93c50 [ 6984.857512] CR2: 0000000000000010 [ 6984.895359] ---[ end trace 2d7ceb528432bf83 ]--- Cc: stable@vger.kernel.org Reported-by: Yi Zhang <yizhan@redhat.com> Tested-by: Yi Zhang <yizhan@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com> 22 March 2017, 14:03:35 UTC
24a4742 Thibault Saunier 01 February 2017, 20:05:21 UTC [media] exynos-gsc: Do not swap cb/cr for semi planar formats In the case of semi planar formats cb and cr are in the same plane in memory, meaning that will be set to 'cb' whatever the format is, and whatever the (packed) order of those components are. Suggested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Thibault Saunier <thibault.saunier@osg.samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> 22 March 2017, 12:50:07 UTC
389e3f0 Shailendra Verma 02 December 2016, 04:48:01 UTC [media] bdisp: Clean up file handle in open() error path The File handle is not yet added in the vdev list.So no need to call v4l2_fh_del(&ctx->fh)if it fails to create control. Signed-off-by: Shailendra Verma <shailendra.v@samsung.com> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> 22 March 2017, 12:50:02 UTC
6e2e0ee Arnd Bergmann 09 February 2017, 15:09:08 UTC [media] coda/imx-vdoa: platform_driver should not be const The device driver platform is actually written to during registration, for setting the owner field, so platform_driver_register() does not take a const pointer: drivers/media/platform/coda/imx-vdoa.c: In function 'vdoa_driver_init': drivers/media/platform/coda/imx-vdoa.c:333:213: error: passing argument 1 of '__platform_driver_register' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] module_platform_driver(vdoa_driver); In file included from drivers/media/platform/coda/imx-vdoa.c:22:0: include/linux/platform_device.h:199:12: note: expected 'struct platform_driver *' but argument is of type 'const struct platform_driver *' extern int __platform_driver_register(struct platform_driver *, ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/media/platform/coda/imx-vdoa.c: In function 'vdoa_driver_exit': drivers/media/platform/coda/imx-vdoa.c:333:626: error: passing argument 1 of 'platform_driver_unregister' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] Remove the modifier again. Fixes: d2fe28feaebb ("[media] coda/imx-vdoa: constify structs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> 22 March 2017, 12:49:32 UTC
5c1724c Greg Kroah-Hartman 22 March 2017, 11:03:17 UTC Merge tag 'extcon-fixes-for-4.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-linus Chanwoo writes: Update extcon for v4.11-rc3 This patch fixes issues for Intel INT3496 ACPI device as following: - Propagate error code of gpiod_to_irq(). - Set the ID pin as the input direction if firmware has the bug - Rename the gpio name for bining according to the documentation. - Add gpio acpi mapping table and the dependency on X86. - Use the devm_gpiod_get() instead of gpiod_get_index because of acpi mapping table. 22 March 2017, 11:03:17 UTC
43c4993 Greg Kroah-Hartman 22 March 2017, 11:02:01 UTC Merge tag 'iio-fixes-for-4.11c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Thirds set of IIO fixes for the 4.11 cycle. * core - iio sw-device - ensure configfs is enabled both when building as module and built in. * ak8974 - drop incorrect __exit markup on remove. * hid-sensor-trigger - code reorganise to avoid losing settings if a power cycle occurs during S3. * lsm6dsx - fix incorrect overwrite of parts of FIFO_CTRL2 register during watermark configuration. * ti-am335x - fix a hard to hit bug when reenabling from a fifo overrun by waiting for current cycle to finish. 22 March 2017, 11:02:01 UTC
5003ae1 Koos Vriezen 01 March 2017, 20:02:50 UTC iommu/vt-d: Fix NULL pointer dereference in device_to_iommu The function device_to_iommu() in the Intel VT-d driver lacks a NULL-ptr check, resulting in this oops at boot on some platforms: BUG: unable to handle kernel NULL pointer dereference at 00000000000007ab IP: [<ffffffff8132234a>] device_to_iommu+0x11a/0x1a0 PGD 0 [...] Call Trace: ? find_or_alloc_domain.constprop.29+0x1a/0x300 ? dw_dma_probe+0x561/0x580 [dw_dmac_core] ? __get_valid_domain_for_dev+0x39/0x120 ? __intel_map_single+0x138/0x180 ? intel_alloc_coherent+0xb6/0x120 ? sst_hsw_dsp_init+0x173/0x420 [snd_soc_sst_haswell_pcm] ? mutex_lock+0x9/0x30 ? kernfs_add_one+0xdb/0x130 ? devres_add+0x19/0x60 ? hsw_pcm_dev_probe+0x46/0xd0 [snd_soc_sst_haswell_pcm] ? platform_drv_probe+0x30/0x90 ? driver_probe_device+0x1ed/0x2b0 ? __driver_attach+0x8f/0xa0 ? driver_probe_device+0x2b0/0x2b0 ? bus_for_each_dev+0x55/0x90 ? bus_add_driver+0x110/0x210 ? 0xffffffffa11ea000 ? driver_register+0x52/0xc0 ? 0xffffffffa11ea000 ? do_one_initcall+0x32/0x130 ? free_vmap_area_noflush+0x37/0x70 ? kmem_cache_alloc+0x88/0xd0 ? do_init_module+0x51/0x1c4 ? load_module+0x1ee9/0x2430 ? show_taint+0x20/0x20 ? kernel_read_file+0xfd/0x190 ? SyS_finit_module+0xa3/0xb0 ? do_syscall_64+0x4a/0xb0 ? entry_SYSCALL64_slow_path+0x25/0x25 Code: 78 ff ff ff 4d 85 c0 74 ee 49 8b 5a 10 0f b6 9b e0 00 00 00 41 38 98 e0 00 00 00 77 da 0f b6 eb 49 39 a8 88 00 00 00 72 ce eb 8f <41> f6 82 ab 07 00 00 04 0f 85 76 ff ff ff 0f b6 4d 08 88 0e 49 RIP [<ffffffff8132234a>] device_to_iommu+0x11a/0x1a0 RSP <ffffc90001457a78> CR2: 00000000000007ab ---[ end trace 16f974b6d58d0aad ]--- Add the missing pointer check. Fixes: 1c387188c60f53b338c20eee32db055dfe022a9b ("iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions") Signed-off-by: Koos Vriezen <koos.vriezen@gmail.com> Cc: stable@vger.kernel.org # 4.8.15+ Signed-off-by: Joerg Roedel <jroedel@suse.de> 22 March 2017, 11:01:42 UTC
70216fd Hans de Goede 13 March 2017, 11:28:34 UTC extcon: int3496: Set the id pin to direction-input if necessary With the new more strict ACPI gpio code the dsdt's IoRestriction flags are honored on gpiod_get, but in some dsdt's it is wrong, so explicitly call gpiod_direction_input on the id gpio if necessary. This fixes the following errors when the int3496 code is used together with the new more strict ACPI gpio code: [ 2382.484415] gpio gpiochip1: (INT33FF:01): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ [ 2382.484425] gpio gpiochip1: (INT33FF:01): unable to lock HW IRQ 3 for IRQ [ 2382.484429] genirq: Failed to request resources for INT3496:00 (irq 174) on irqchip chv-gpio [ 2382.484518] intel-int3496 INT3496:00: can't request IRQ for USB ID GPIO: -22 [ 2382.500359] intel-int3496: probe of INT3496:00 failed with error -22 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> 22 March 2017, 09:29:48 UTC
408c5b4 Hans de Goede 10 March 2017, 20:52:08 UTC extcon: int3496: Use gpiod_get instead of gpiod_get_index Now that we've an acpi mapping table we should be using gpiod_get instead of gpiod_get_index. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> 22 March 2017, 09:29:47 UTC
059c787 Peter Robinson 02 March 2017, 18:10:10 UTC extcon: int3496: Add dependency on X86 as it's Intel specific Add dependency on X86 so it doesn't show up on other arches and add a option for compile test so it still gets build coverage. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> 22 March 2017, 09:29:46 UTC
8cb2cba Andy Shevchenko 24 February 2017, 12:35:55 UTC extcon: int3496: Add GPIO ACPI mapping table In order to make GPIO ACPI library stricter prepare users of gpiod_get_index() to correctly behave when there no mapping is provided by firmware. Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> 22 March 2017, 09:29:46 UTC
90400c5 Andy Shevchenko 24 February 2017, 12:35:54 UTC extcon: int3496: Rename GPIO pins in accordance with binding Update GPIO pin names in extcon-intel-int3496.c driver to follow the existing extcon binding. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> 22 March 2017, 09:29:45 UTC
25cd972 Krzysztof Opasiak 31 January 2017, 17:12:31 UTC usb: gadget: f_hid: fix: Don't access hidg->req without spinlock held hidg->req should be accessed only with write_spinlock held as it is set to NULL when we get disabled by host. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 22 March 2017, 09:21:10 UTC
1f45926 Gustavo A. R. Silva 10 March 2017, 21:39:32 UTC usb: gadget: udc: remove pointer dereference after free Remove pointer dereference after free. Addresses-Coverity-ID: 1091173 Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 22 March 2017, 09:21:10 UTC
16bb05d Roger Quadros 08 March 2017, 14:05:44 UTC usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed As per USB3.0 Specification "Table 9-20. Standard Endpoint Descriptor", for interrupt and isochronous endpoints, wMaxPacketSize must be set to 1024 if the endpoint defines bMaxBurst to be greater than zero. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 22 March 2017, 09:21:09 UTC
09424c5 Roger Quadros 08 March 2017, 14:05:43 UTC usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerInterval The streaming_maxburst module parameter is 0 offset (0..15) so we must add 1 while using it for wBytesPerInterval calculation for the SuperSpeed companion descriptor. Without this host uvcvideo driver will always see the wrong wBytesPerInterval for SuperSpeed uvc gadget and may not find a suitable video interface endpoint. e.g. for streaming_maxburst = 0 case it will always fail as wBytePerInterval was evaluating to 0. Cc: stable@vger.kernel.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 22 March 2017, 09:21:09 UTC
74098c4 Oliver Neukum 14 March 2017, 11:09:56 UTC usb: gadget: acm: fix endianness in notifications The gadget code exports the bitfield for serial status changes over the wire in its internal endianness. The fix is to convert to little endian before sending it over the wire. Signed-off-by: Oliver Neukum <oneukum@suse.com> Tested-by: 家瑋 <momo1208@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 22 March 2017, 09:20:52 UTC
de288e3 Janusz Dziedzic 13 March 2017, 12:11:32 UTC usb: dwc3: gadget: delay unmap of bounced requests In the case of bounced ep0 requests, we must delay DMA operation until after ->complete() otherwise we might overwrite contents of req->buf. This caused problems with RNDIS gadget. Signed-off-by: Janusz Dziedzic <januszx.dziedzic@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 22 March 2017, 09:20:36 UTC
a5023a9 Peter Huewe 16 March 2017, 23:28:56 UTC hwmon: Add missing HWMON_T_ALARM Unfortunately the HWMON_T_ALARM define was missing, although the associated entry was present in hwmon_temp_attributes. This is needed to convert drivers to the new interface which use channel based alarms. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> 22 March 2017, 07:18:22 UTC
8358378 Guenter Roeck 12 March 2017, 13:18:58 UTC hwmon: (it87) Avoid registering the same chip on both SIO addresses IT8705F is known to respond on both SIO addresses. Registering it twice may result in system lockups. Reported-by: Russell King <linux@armlinux.org.uk> Fixes: e84bd9535e2b ("hwmon: (it87) Add support for second Super-IO chip") Signed-off-by: Guenter Roeck <linux@roeck-us.net> 22 March 2017, 07:18:21 UTC
dd7406d Alex Hemme 07 March 2017, 19:38:29 UTC hwmon: (max31790) Set correct PWM value Traced fans not spinning to incorrect PWM value being written. The passed in value was written instead of the calulated value. Fixes: 54187ff9d766 ("hwmon: (max31790) Convert to use new hwmon registration API") Signed-off-by: Alex Hemme <ahemme@cisco.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> 22 March 2017, 07:18:20 UTC
4071898 Tony Lindgren 19 March 2017, 16:19:57 UTC net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4 This gets qmicli working with the MDM6600 modem. Cc: Bjørn Mork <bjorn@mork.no> Reviewed-by: Sebastian Reichel <sre@kernel.org> Tested-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> 22 March 2017, 02:06:38 UTC
e8f1f34 Zi Shen Lim 20 March 2017, 06:03:14 UTC selftests/bpf: fix broken build, take 2 Merge of 'linux-kselftest-4.11-rc1': 1. Partially removed use of 'test_objs' target, breaking force rebuild of BPFOBJ, introduced in commit d498f8719a09 ("bpf: Rebuild bpf.o for any dependency update"). Update target so dependency on BPFOBJ is restored. 2. Introduced commit 2047f1d8ba28 ("selftests: Fix the .c linking rule") which fixes order of LDLIBS. Commit d02d8986a768 ("bpf: Always test unprivileged programs") added libcap dependency into CFLAGS. Use LDLIBS instead to fix linking of test_verifier. 3. Introduced commit d83c3ba0b926 ("selftests: Fix selftests build to just build, not run tests"). Reordering the Makefile allows us to remove the 'all' target. Tested both: selftests/bpf$ make and selftests$ make TARGETS=bpf on Ubuntu 16.04.2. Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 March 2017, 01:57:58 UTC
4ef1b28 Soheil Hassas Yeganeh 18 March 2017, 21:03:00 UTC tcp: mark skbs with SCM_TIMESTAMPING_OPT_STATS SOF_TIMESTAMPING_OPT_STATS can be enabled and disabled while packets are collected on the error queue. So, checking SOF_TIMESTAMPING_OPT_STATS in sk->sk_tsflags is not enough to safely assume that the skb contains OPT_STATS data. Add a bit in sock_exterr_skb to indicate whether the skb contains opt_stats data. Fixes: 1c885808e456 ("tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING") Reported-by: JongHwan Kim <zzoru007@gmail.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 March 2017, 01:44:17 UTC
8605330 Soheil Hassas Yeganeh 18 March 2017, 21:02:59 UTC tcp: fix SCM_TIMESTAMPING_OPT_STATS for normal skbs __sock_recv_timestamp can be called for both normal skbs (for receive timestamps) and for skbs on the error queue (for transmit timestamps). Commit 1c885808e456 (tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING) assumes any skb passed to __sock_recv_timestamp are from the error queue, containing OPT_STATS in the content of the skb. This results in accessing invalid memory or generating junk data. To fix this, set skb->pkt_type to PACKET_OUTGOING for packets on the error queue. This is safe because on the receive path on local sockets skb->pkt_type is never set to PACKET_OUTGOING. With that, copy OPT_STATS from a packet, only if its pkt_type is PACKET_OUTGOING. Fixes: 1c885808e456 ("tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING") Reported-by: JongHwan Kim <zzoru007@gmail.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 March 2017, 01:44:17 UTC
ff01047 Viresh Kumar 21 March 2017, 06:06:06 UTC cpufreq: Restore policy min/max limits on CPU online On CPU online the cpufreq core restores the previous governor (or the previous "policy" setting for ->setpolicy drivers), but it does not restore the min/max limits at the same time, which is confusing, inconsistent and real pain for users who set the limits and then suspend/resume the system (using full suspend), in which case the limits are reset on all CPUs except for the boot one. Fix this by making cpufreq_online() restore the limits when an inactive policy is brought online. The commit log and patch are inspired from Rafael's earlier work. Reported-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.3+ <stable@vger.kernel.org> # 4.3+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 22 March 2017, 01:38:27 UTC
23bb09c Xin Long 18 March 2017, 12:03:59 UTC sctp: out_qlen should be updated when pruning unsent queue This patch is to fix the issue that sctp_prsctp_prune_sent forgot to update q->out_qlen when removing a chunk from unsent queue. Fixes: 8dbdf1f5b09c ("sctp: implement prsctp PRIO policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 March 2017, 01:32:36 UTC
1f90449 Xin Long 18 March 2017, 11:27:23 UTC sctp: define dst_pending_confirm as a bit in sctp_transport As tp->dst_pending_confirm's value can only be set 0 or 1, this patch is to change to define it as a bit instead of __u32. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 March 2017, 01:31:50 UTC
486a43d Xin Long 18 March 2017, 11:12:22 UTC sctp: remove temporary variable confirm from sctp_packet_transmit Commit c86a773c7802 ("sctp: add dst_pending_confirm flag") introduced a temporary variable "confirm" in sctp_packet_transmit. But it broke the rule that longer lines should be above shorter ones. Besides, this variable is not necessary, so this patch is to just remove it and use tp->dst_pending_confirm directly. Fixes: c86a773c7802 ("sctp: add dst_pending_confirm flag") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 March 2017, 01:31:02 UTC
3dc857f David Ahern 17 March 2017, 23:07:11 UTC net: vrf: Reset rt6i_idev in local dst after put The VRF driver takes a reference to the inet6_dev on the VRF device for its rt6_local dst when handling local traffic through the VRF device as a loopback. When the device is deleted the driver does a put on the idev but does not reset rt6i_idev in the rt6_info struct. When the dst is destroyed, dst_destroy calls ip6_dst_destroy which does a second put for what is essentially the same reference causing it to be prematurely freed. Reset rt6i_idev after the put in the vrf driver. Fixes: b4869aa2f881e ("net: vrf: ipv6 support for local traffic to local addresses") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 March 2017, 00:50:20 UTC
13e2d51 Dan Carpenter 17 March 2017, 20:52:35 UTC bna: integer overflow bug in debugfs We could allocate less memory than intended because we do: bnad->regdata = kzalloc(len << 2, GFP_KERNEL); The shift can overflow leading to a crash. This is debugfs code so the impact is very small. Fixes: 7afc5dbde091 ("bna: Add debugfs interface.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Rasesh Mody <rasesh.mody@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 March 2017, 00:43:16 UTC
6479ca8 Olof Johansson 22 March 2017, 00:32:54 UTC Merge tag 'at91-ab-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into fixes Fixes for 4.11: - Fix USB host for sama5d2 - Fix cpuidle on sama5 * tag 'at91-ab-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: at91: pm: cpu_idle: switch DDR to power-down mode Revert "ARM: at91/dt: sama5d2: Use new compatible for ohci node" Signed-off-by: Olof Johansson <olof@lixom.net> 22 March 2017, 00:32:54 UTC
6014ce8 Olof Johansson 22 March 2017, 00:30:51 UTC Merge tag 'reset-fixes-for-4.11' of git://git.pengutronix.de/git/pza/linux into fixes Reset controller fixes for v4.11 Fix optional reset_control_get_stubs to return NULL and remove warnings from reset_control_* stubs. This fixes commit bb475230b8e5 ("reset: make optional functions really optional"), which was merged in reset-for-4.11, and would cause consumer drivers depending on the new behaviour of optional resets to fail probing if RESET_CONTROLLER Kconfig option is disabled. * tag 'reset-fixes-for-4.11' of git://git.pengutronix.de/git/pza/linux: reset: fix optional reset_control_get stubs to return NULL Signed-off-by: Olof Johansson <olof@lixom.net> 22 March 2017, 00:30:51 UTC
2b25930 Olof Johansson 22 March 2017, 00:30:16 UTC Merge tag 'sunxi-fixes-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Allwinner fixes for 4.11 A bunch of device tree fixes for various boards / SoCs. * tag 'sunxi-fixes-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: sun8i: a23/a33: drop bl_en_pin GPIO pinmux in reference design DTSI ARM: dts: sun7i: lamobo-r1: Fix CPU port RGMII settings ARM: sun8i: Fix the mali clock rate Signed-off-by: Olof Johansson <olof@lixom.net> 22 March 2017, 00:30:16 UTC
fe64ccb Olof Johansson 22 March 2017, 00:29:50 UTC Merge tag 'imx-fixes-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.11: - A fix to reboot hang seen on imx6sx-udoo-neo board, by removing arm-supply and soc-supply and using LDO enabled mode. * tag 'imx-fixes-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6sx-udoo-neo: Fix reboot hang Signed-off-by: Olof Johansson <olof@lixom.net> 22 March 2017, 00:29:50 UTC
6bd845d Bjørn Mork 17 March 2017, 16:20:48 UTC qmi_wwan: add Dell DW5811e This is a Dell branded Sierra Wireless EM7455. It is operating in MBIM mode by default, but can be configured to provide two QMI/RMNET functions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> 22 March 2017, 00:25:02 UTC
aea92fb Eric Dumazet 17 March 2017, 15:05:28 UTC sch_dsmark: fix invalid skb_cow() usage skb_cow(skb, sizeof(ip header)) is not very helpful in this context. First we need to use pskb_may_pull() to make sure the ip header is in skb linear part, then use skb_try_make_writable() to address clones issues. Fixes: 4c30719f4f55 ("[PKT_SCHED] dsmark: handle cloned and non-linear skb's") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 March 2017, 00:21:27 UTC
0905095 Yaroslav Isakov 16 March 2017, 19:44:10 UTC tun: fix inability to set offloads after disabling them via ethtool Added missing logic in tun driver, which prevents apps to set offloads using tun ioctl, if offloads were previously disabled via ethtool Signed-off-by: Yaroslav Isakov <yaroslav.isakov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 March 2017, 22:30:59 UTC
7df9c24 Andrey Ulanov 15 March 2017, 03:16:42 UTC net: unix: properly re-increment inflight counter of GC discarded candidates Dmitry has reported that a BUG_ON() condition in unix_notinflight() may be triggered by a simple code that forwards unix socket in an SCM_RIGHTS message. That is caused by incorrect unix socket GC implementation in unix_gc(). The GC first collects list of candidates, then (a) decrements their "children's" inflight counter, (b) checks which inflight counters are now 0, and then (c) increments all inflight counters back. (a) and (c) are done by calling scan_children() with inc_inflight or dec_inflight as the second argument. Commit 6209344f5a37 ("net: unix: fix inflight counting bug in garbage collector") changed scan_children() such that it no longer considers sockets that do not have UNIX_GC_CANDIDATE flag. It also added a block of code that that unsets this flag _before_ invoking scan_children(, dec_iflight, ). This may lead to incorrect inflight counters for some sockets. This change fixes this bug by changing order of operations: UNIX_GC_CANDIDATE is now unset only after all inflight counters are restored to the original state. kernel BUG at net/unix/garbage.c:149! RIP: 0010:[<ffffffff8717ebf4>] [<ffffffff8717ebf4>] unix_notinflight+0x3b4/0x490 net/unix/garbage.c:149 Call Trace: [<ffffffff8716cfbf>] unix_detach_fds.isra.19+0xff/0x170 net/unix/af_unix.c:1487 [<ffffffff8716f6a9>] unix_destruct_scm+0xf9/0x210 net/unix/af_unix.c:1496 [<ffffffff86a90a01>] skb_release_head_state+0x101/0x200 net/core/skbuff.c:655 [<ffffffff86a9808a>] skb_release_all+0x1a/0x60 net/core/skbuff.c:668 [<ffffffff86a980ea>] __kfree_skb+0x1a/0x30 net/core/skbuff.c:684 [<ffffffff86a98284>] kfree_skb+0x184/0x570 net/core/skbuff.c:705 [<ffffffff871789d5>] unix_release_sock+0x5b5/0xbd0 net/unix/af_unix.c:559 [<ffffffff87179039>] unix_release+0x49/0x90 net/unix/af_unix.c:836 [<ffffffff86a694b2>] sock_release+0x92/0x1f0 net/socket.c:570 [<ffffffff86a6962b>] sock_close+0x1b/0x20 net/socket.c:1017 [<ffffffff81a76b8e>] __fput+0x34e/0x910 fs/file_table.c:208 [<ffffffff81a771da>] ____fput+0x1a/0x20 fs/file_table.c:244 [<ffffffff81483ab0>] task_work_run+0x1a0/0x280 kernel/task_work.c:116 [< inline >] exit_task_work include/linux/task_work.h:21 [<ffffffff8141287a>] do_exit+0x183a/0x2640 kernel/exit.c:828 [<ffffffff8141383e>] do_group_exit+0x14e/0x420 kernel/exit.c:931 [<ffffffff814429d3>] get_signal+0x663/0x1880 kernel/signal.c:2307 [<ffffffff81239b45>] do_signal+0xc5/0x2190 arch/x86/kernel/signal.c:807 [<ffffffff8100666a>] exit_to_usermode_loop+0x1ea/0x2d0 arch/x86/entry/common.c:156 [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [<ffffffff81009693>] syscall_return_slowpath+0x4d3/0x570 arch/x86/entry/common.c:259 [<ffffffff881478e6>] entry_SYSCALL_64_fastpath+0xc4/0xc6 Link: https://lkml.org/lkml/2017/3/6/252 Signed-off-by: Andrey Ulanov <andreyu@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 6209344 ("net: unix: fix inflight counting bug in garbage collector") Signed-off-by: David S. Miller <davem@davemloft.net> 21 March 2017, 22:25:10 UTC
a59d376 David S. Miller 21 March 2017, 21:41:47 UTC Merge branch 'vsock-pkt-cancel' Peng Tao says: ==================== vsock: cancel connect packets when failing to connect Currently, if a connect call fails on a signal or timeout (e.g., guest is still in the process of starting up), we'll just return to caller and leave the connect packet queued and they are sent even though the connection is considered a failure, which can confuse applications with unwanted false connect attempt. The patchset enables vsock (both host and guest) to cancel queued packets when a connect attempt is considered to fail. v5 changelog: - change virtio_vsock_pkt->cancel_token back to virtio_vsock_pkt->vsk v4 changelog: - drop two unnecessary void * cast - update new callback comment v3 changelog: - define cancel_pkt callback in struct vsock_transport rather than struct virtio_transport - rename virtio_vsock_pkt->vsk to virtio_vsock_pkt->cancel_token v2 changelog: - fix queued_replies counting and resume tx/rx when necessary ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 21 March 2017, 21:41:47 UTC
380feae Peng Tao 15 March 2017, 01:32:17 UTC vsock: cancel packets when failing to connect Otherwise we'll leave the packets queued until releasing vsock device. E.g., if guest is slow to start up, resulting ETIMEDOUT on connect, guest will get the connect requests from failed host sockets. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 March 2017, 21:41:47 UTC
073b4f2 Peng Tao 15 March 2017, 01:32:16 UTC vsock: add pkt cancel capability Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 March 2017, 21:41:47 UTC
16320f3 Peng Tao 15 March 2017, 01:32:15 UTC vhost-vsock: add pkt cancel capability To allow canceling all packets of a connection. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 March 2017, 21:41:46 UTC
36d277b Peng Tao 15 March 2017, 01:32:14 UTC vsock: track pkt owner vsock So that we can cancel a queued pkt later if necessary. Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 March 2017, 21:41:46 UTC
8a0f5cc Herbert Xu 14 March 2017, 10:25:57 UTC crypto: deadlock between crypto_alg_sem/rtnl_mutex/genl_mutex On Tue, Mar 14, 2017 at 10:44:10AM +0100, Dmitry Vyukov wrote: > > Yes, please. > Disregarding some reports is not a good way long term. Please try this patch. ---8<--- Subject: netlink: Annotate nlk cb_mutex by protocol Currently all occurences of nlk->cb_mutex are annotated by lockdep as a single class. This causes a false lcokdep cycle involving genl and crypto_user. This patch fixes it by dividing cb_mutex into individual classes based on the netlink protocol. As genl and crypto_user do not use the same netlink protocol this breaks the false dependency loop. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> 21 March 2017, 21:38:15 UTC
98d068a hayeswang 14 March 2017, 06:15:20 UTC r8152: fix the list rx_done may be used without initialization The list rx_done would be initialized when the linking on occurs. Therefore, if a napi is scheduled without any linking on before, the following kernel panic would happen. BUG: unable to handle kernel NULL pointer dereference at 000000000000008 IP: [<ffffffffc085efde>] r8152_poll+0xe1e/0x1210 [r8152] PGD 0 Oops: 0002 [#1] SMP Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 March 2017, 21:37:10 UTC
ad0a45f Vaidyanathan Srinivasan 18 March 2017, 19:21:59 UTC cpuidle: Validate cpu_dev in cpuidle_add_sysfs() If a given cpu is not in cpu_present and cpu hotplug is disabled, arch can skip setting up the cpu_dev. Arch cpuidle driver should pass correct cpu mask for registration, but failing to do so by the driver causes error to propagate and crash like this: [ 30.076045] Unable to handle kernel paging request for data at address 0x00000048 [ 30.076100] Faulting instruction address: 0xc0000000007b2f30 cpu 0x4d: Vector: 300 (Data Access) at [c000003feb18b670] pc: c0000000007b2f30: kobject_get+0x20/0x70 lr: c0000000007b3c94: kobject_add_internal+0x54/0x3f0 sp: c000003feb18b8f0 msr: 9000000000009033 dar: 48 dsisr: 40000000 current = 0xc000003fd2ed8300 paca = 0xc00000000fbab500 softe: 0 irq_happened: 0x01 pid = 1, comm = swapper/0 Linux version 4.11.0-rc2-svaidy+ (sv@sagarika) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #10 SMP Sun Mar 19 00:08:09 IST 2017 enter ? for help [c000003feb18b960] c0000000007b3c94 kobject_add_internal+0x54/0x3f0 [c000003feb18b9f0] c0000000007b43a4 kobject_init_and_add+0x64/0xa0 [c000003feb18ba70] c000000000e284f4 cpuidle_add_sysfs+0xb4/0x130 [c000003feb18baf0] c000000000e26038 cpuidle_register_device+0x118/0x1c0 [c000003feb18bb30] c000000000e26c48 cpuidle_register+0x78/0x120 [c000003feb18bbc0] c00000000168fd9c powernv_processor_idle_init+0x110/0x1c4 [c000003feb18bc40] c00000000000cff8 do_one_initcall+0x68/0x1d0 [c000003feb18bd00] c0000000016242f4 kernel_init_freeable+0x280/0x360 [c000003feb18bdc0] c00000000000d864 kernel_init+0x24/0x160 [c000003feb18be30] c00000000000b4e8 ret_from_kernel_thread+0x5c/0x74 Validating cpu_dev fixes the crash and reports correct error message like: [ 30.163506] Failed to register cpuidle device for cpu136 [ 30.173329] Registration of powernv driver failed. Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> [ rjw: Comment massage ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 21 March 2017, 21:26:37 UTC
64897b2 Rafael J. Wysocki 21 March 2017, 21:19:07 UTC cpufreq: intel_pstate: Fix policy data management in passive mode The policy->cpuinfo.max_freq and policy->max updates in intel_cpufreq_turbo_update() are excessive as they are done for no good reason and may lead to problems in principle, so they should be dropped. However, after dropping them intel_cpufreq_turbo_update() becomes almost entirely pointless, because the check made by it is made again down the road in intel_pstate_prepare_request(). The only thing in it that still needs to be done is the call to update_turbo_state(), so drop intel_cpufreq_turbo_update() altogether and make its callers invoke update_turbo_state() directly instead of it. In addition to that, fix intel_cpufreq_verify_policy() so that it checks global.no_turbo in addition to global.turbo_disabled when updating policy->cpuinfo.max_freq to make it consistent with intel_pstate_verify_policy(). Fixes: 001c76f05b01 (cpufreq: intel_pstate: Generic governors support) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 21 March 2017, 21:19:07 UTC
093b995 Huang Ying 20 March 2017, 06:26:42 UTC mm, swap: Remove WARN_ON_ONCE() in free_swap_slot() Before commit 452b94b8c8c7 ("mm/swap: don't BUG_ON() due to uninitialized swap slot cache"), the following bug is reported, ------------[ cut here ]------------ kernel BUG at mm/swap_slots.c:270! invalid opcode: 0000 [#1] SMP CPU: 5 PID: 1745 Comm: (sd-pam) Not tainted 4.11.0-rc1-00243-g24c534bb161b #1 Hardware name: System manufacturer System Product Name/Z170-K, BIOS 1803 05/06/2016 RIP: 0010:free_swap_slot+0xba/0xd0 Call Trace: swap_free+0x36/0x40 do_swap_page+0x360/0x6d0 __handle_mm_fault+0x880/0x1080 handle_mm_fault+0xd0/0x240 __do_page_fault+0x232/0x4d0 do_page_fault+0x20/0x70 page_fault+0x22/0x30 ---[ end trace aefc9ede53e0ab21 ]--- This is raised by the BUG_ON(!swap_slot_cache_initialized) in free_swap_slot(). This is incorrect, because even if the swap slots cache fails to be initialized, the swap should operate properly without the swap slots cache. And the use_swap_slot_cache check later in the function will protect the uninitialized swap slots cache case. In commit 452b94b8c8c7, the BUG_ON() is replaced by WARN_ON_ONCE(). In the patch, the WARN_ON_ONCE() is removed too. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 March 2017, 21:13:19 UTC
1f02071 Linus Torvalds 21 March 2017, 20:10:17 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Nine small fixes: the biggest is probably finally sorting out Kconfig issues with lpfc nvme. There are some performance fixes for megaraid and hpsa and a static checker fix" [ Johannes Thumshirn points out that there still seems to be more lpfc vs nvme config issues. Oh well. - Linus ] * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Finalize Kconfig options for nvme scsi: ufs: don't check unsigned type for a negative value scsi: hpsa: do not timeout reset operations scsi: hpsa: limit outstanding rescans scsi: hpsa: update check for logical volume status scsi: megaraid_sas: Driver version upgrade scsi: megaraid_sas: raid6 also require cpuSel check same as raid5 scsi: megaraid_sas: add correct return type check for ldio hint logic for raid1 scsi: megaraid_sas: enable intx only if msix request fails 21 March 2017, 20:10:17 UTC
2c867ac Linus Torvalds 21 March 2017, 20:07:18 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - regression fixes for Wacom devices, from Aaron Armstrong Skomra and Ping Cheng - memory leak in hid-sony driver from Roderick Colenbrander - new device IDs support from Oscar Campos and Daniel Drake * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wacom: generic: Wacom mouse is only provided for opaque tablets HID: corsair: Add driver Scimitar Pro RGB gaming mouse 1b1c:1b3e support to hid-corsair HID: corsair: support for K65-K70 Rapidfire and Scimitar Pro RGB HID: wacom: don't manually release resources for the EKR HID: wacom: Correct Intuos Pro 2 resolution HID: sony: Fix input device leak when connecting a DS4 twice using USB/BT HID: chicony: Add support for another ASUS Zen AiO keyboard 21 March 2017, 20:07:18 UTC
4719177 Linus Torvalds 21 March 2017, 20:01:53 UTC Merge tag 'gpio-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here is the first set of GPIO fixes for 4.11. It was delayed a bit beacuse I was chicken when linux-next was not rotating last week. This hits the ST serial driver in drivers/tty/serial and that has an ACK from Greg, he suggested to keep the old GPIO fwnode API around to smoothen things in the merge Windod and those have now served their purpose so we take them out and convert the last driver to the new API. Apart from that it's fixes as usual. Summary: - set the parent on the Altera A10SR driver, also fix high level IRQs. - fix error path on the mockup driver. - compilation noise about unused functions fixed. - fix missed interrupts on the MCP23S08 expander, this is also tagged for stable. - retire the interrim helpers devm_get_gpiod_from_child() used to smoothen merging in the merge window" * tag 'gpio-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio:mcp23s08 Fixed missing interrupts serial: st-asc: Use new GPIOD API to obtain RTS pin gpio: altera: Use handle_level_irq when configured as a level_high gpio: xgene: mark PM functions as __maybe_unused gpio: mockup: return -EFAULT if copy_from_user() fails gpio: altera-a10sr: Set gpio_chip parent property 21 March 2017, 20:01:53 UTC
8a01150 Linus Torvalds 21 March 2017, 19:54:12 UTC Merge tag 'rproc-v4.11-fixes' of git://github.com/andersson/remoteproc Pull remoteproc fix from Bjorn Andersson: "This fixes a Kbuild dependency issue related to the Qualcomm remoteproc drivers" * tag 'rproc-v4.11-fixes' of git://github.com/andersson/remoteproc: remoteproc: qcom: fix QCOM_SMD dependencies 21 March 2017, 19:54:12 UTC
689b957 Linus Torvalds 21 March 2017, 19:27:06 UTC Merge tag 'for-f2fs-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs fixes from Jaegeuk Kim: - fix performance regression reported by lkp-rebot - fix potential data lost after power-cut due to SSR reallocation * tag 'for-f2fs-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: combine nat_bits and free_nid_bitmap cache f2fs: skip scanning free nid bitmap of full NAT blocks f2fs: use __set{__clear}_bit_le f2fs: declare static functions f2fs: don't overwrite node block by SSR 21 March 2017, 19:27:06 UTC
65b1ade Alex Williamson 21 March 2017, 19:19:09 UTC vfio: Rework group release notifier warning The intent of the original warning is make sure that the mdev vendor driver has removed any group notifiers at the point where the group is closed by the user. Theoretically this would be through an orderly shutdown where any devices are release prior to the group release. We can't always count on an orderly shutdown, the user can close the group before the notifier can be removed or the user task might be killed. We'd like to add this sanity test when the group is idle and the only references are from the devices within the group themselves, but we don't have a good way to do that. Instead check both when the group itself is removed and when the group is opened. A bit later than we'd prefer, but better than the current over aggressive approach. Fixes: ccd46dbae77d ("vfio: support notifier chain in vfio_group") Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: <stable@vger.kernel.org> # v4.10 Cc: Jike Song <jike.song@intel.com> 21 March 2017, 19:19:09 UTC
713cc9d Will Deacon 21 March 2017, 18:04:26 UTC arm64: compat: Update compat syscalls Hook up three pkey syscalls (which we don't implement) and the new statx syscall, as has been done for arch/arm/. Signed-off-by: Will Deacon <will.deacon@arm.com> 21 March 2017, 18:10:40 UTC
0ca10b6 Philipp Zabel 20 March 2017, 10:25:16 UTC reset: fix optional reset_control_get stubs to return NULL When RESET_CONTROLLER is not enabled, the optional reset_control_get stubs should now also return NULL. Since it is now valid for reset_control_assert/deassert/reset/status/put to be called unconditionally, with NULL as an argument for optional resets, the stubs are not allowed to warn anymore. Fixes: bb475230b8e5 ("reset: make optional functions really optional") Reported-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Cc: Ramiro Oliveira <Ramiro.Oliveira@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> 21 March 2017, 17:19:43 UTC
a457d08 Jens Axboe 21 March 2017, 17:03:53 UTC Merge branch 'nvme-4.11-rc' of git://git.infradead.org/nvme into for-linus Sagi writes: This consists of some fixes for issues reported lately: - loop and rdma host driver cpu hotplug fixes - fix loop use-after-free - nvmet percpu_ref confirmation fix to fail ongoing requests - nvmet-rdma fix a non-initialized commands deref 21 March 2017, 17:03:53 UTC
945dd5b Sagi Grimberg 13 March 2017, 11:27:51 UTC nvme-loop: handle cpu unplug when re-establishing the controller If a cpu unplug event has occured, we need to take the minimum of the provided nr_io_queues and the number of online cpus, otherwise we won't be able to connect them as blk-mq mapping won't dispatch to those queues. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> 21 March 2017, 16:38:46 UTC
c248c64 Sagi Grimberg 09 March 2017, 11:26:07 UTC nvme-rdma: handle cpu unplug when re-establishing the controller If a cpu unplug event has occured, we need to take the minimum of the provided nr_io_queues and the number of online cpus, otherwise we won't be able to connect them as blk-mq mapping won't dispatch to those queues. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> 21 March 2017, 16:38:41 UTC
5b52330 Paul Moore 21 March 2017, 15:26:35 UTC audit: fix auditd/kernel connection state tracking What started as a rather straightforward race condition reported by Dmitry using the syzkaller fuzzer ended up revealing some major problems with how the audit subsystem managed its netlink sockets and its connection with the userspace audit daemon. Fixing this properly had quite the cascading effect and what we are left with is this rather large and complicated patch. My initial goal was to try and decompose this patch into multiple smaller patches, but the way these changes are intertwined makes it difficult to split these changes into meaningful pieces that don't break or somehow make things worse for the intermediate states. The patch makes a number of changes, but the most significant are highlighted below: * The auditd tracking variables, e.g. audit_sock, are now gone and replaced by a RCU/spin_lock protected variable auditd_conn which is a structure containing all of the auditd tracking information. * We no longer track the auditd sock directly, instead we track it via the network namespace in which it resides and we use the audit socket associated with that namespace. In spirit, this is what the code was trying to do prior to this patch (at least I think that is what the original authors intended), but it was done rather poorly and added a layer of obfuscation that only masked the underlying problems. * Big backlog queue cleanup, again. In v4.10 we made some pretty big changes to how the audit backlog queues work, here we haven't changed the queue design so much as cleaned up the implementation. Brought about by the locking changes, we've simplified kauditd_thread() quite a bit by consolidating the queue handling into a new helper function, kauditd_send_queue(), which allows us to eliminate a lot of very similar code and makes the looping logic in kauditd_thread() clearer. * All netlink messages sent to auditd are now sent via auditd_send_unicast_skb(). Other than just making sense, this makes the lock handling easier. * Change the audit_log_start() sleep behavior so that we never sleep on auditd events (unchanged) or if the caller is holding the audit_cmd_mutex (changed). Previously we didn't sleep if the caller was auditd or if the message type fell between a certain range; the type check was a poor effort of doing what the cmd_mutex check now does. Richard Guy Briggs originally proposed not sleeping the cmd_mutex owner several years ago but his patch wasn't acceptable at the time. At least the idea lives on here. * A problem with the lost record counter has been resolved. Steve Grubb and I both happened to notice this problem and according to some quick testing by Steve, this problem goes back quite some time. It's largely a harmless problem, although it may have left some careful sysadmins quite puzzled. Cc: <stable@vger.kernel.org> # 4.10.x- Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Paul Moore <paul@paul-moore.com> 21 March 2017, 15:26:35 UTC
590379a Changbin Du 21 March 2017, 14:47:20 UTC drm/i915: make context status notifier head be per engine GVTg has introduced the context status notifier to schedule the GVTg workload. At that time, the notifier is bound to GVTg context only, so GVTg is not aware of host workloads. Now we are going to improve GVTg's guest workload scheduler policy, and add Guc emulation support for new Gen graphics. Both these two features require acknowledgment for all contexts running on hardware. (But will not alter host workload.) So here try to make some change. The change is simple: 1. Move the context status notifier head from i915_gem_context to intel_engine_cs. Which means there is a notifier head per engine instead of per context. Execlist driver still call notifier for each context sched-in/out events of current engine. 2. At GVTg side, it binds a notifier_block for each physical engine at GVTg initialization period. Then GVTg can hear all context status events. In this patch, GVTg do nothing for host context event, but later will add a function there. But in any case, the notifier callback is a noop if this is no active vGPU. Since intel_gvt_init() is called at early initialization stage and require the status notifier head has been initiated, I initiate it in intel_engine_setup(). v2: remove a redundant newline. (chris) Fixes: 3c7ba6359d70 ("drm/i915: Introduce execlist context status change notification") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100232 Signed-off-by: Changbin Du <changbin.du@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170313024711.28591-1-changbin.du@intel.com Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 3fc03069bc6e6c316f19bb526e3c8ce784677477) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170321144720.17020-1-chris@chris-wilson.co.uk 21 March 2017, 14:51:47 UTC
3d3d18f Chris Wilson 21 March 2017, 14:45:31 UTC drm/i915: Avoid rcu_barrier() from reclaim paths (shrinker) The rcu_barrier() takes the cpu_hotplug mutex which itself is not reclaim-safe, and so rcu_barrier() is illegal from inside the shrinker. [ 309.661373] ========================================================= [ 309.661376] [ INFO: possible irq lock inversion dependency detected ] [ 309.661380] 4.11.0-rc1-CI-CI_DRM_2333+ #1 Tainted: G W [ 309.661383] --------------------------------------------------------- [ 309.661386] gem_exec_gttfil/6435 just changed the state of lock: [ 309.661389] (rcu_preempt_state.barrier_mutex){+.+.-.}, at: [<ffffffff81100731>] _rcu_barrier+0x31/0x160 [ 309.661399] but this lock took another, RECLAIM_FS-unsafe lock in the past: [ 309.661402] (cpu_hotplug.lock){+.+.+.} [ 309.661404] and interrupts could create inverse lock ordering between them. [ 309.661410] other info that might help us debug this: [ 309.661414] Possible interrupt unsafe locking scenario: [ 309.661417] CPU0 CPU1 [ 309.661419] ---- ---- [ 309.661421] lock(cpu_hotplug.lock); [ 309.661425] local_irq_disable(); [ 309.661432] lock(rcu_preempt_state.barrier_mutex); [ 309.661441] lock(cpu_hotplug.lock); [ 309.661446] <Interrupt> [ 309.661448] lock(rcu_preempt_state.barrier_mutex); [ 309.661453] *** DEADLOCK *** [ 309.661460] 4 locks held by gem_exec_gttfil/6435: [ 309.661464] #0: (sb_writers#10){.+.+.+}, at: [<ffffffff8120d83d>] vfs_write+0x17d/0x1f0 [ 309.661475] #1: (debugfs_srcu){......}, at: [<ffffffff81320491>] debugfs_use_file_start+0x41/0xa0 [ 309.661486] #2: (&attr->mutex){+.+.+.}, at: [<ffffffff8123a3e7>] simple_attr_write+0x37/0xe0 [ 309.661495] #3: (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0091b4a>] i915_drop_caches_set+0x3a/0x150 [i915] [ 309.661540] the shortest dependencies between 2nd lock and 1st lock: [ 309.661547] -> (cpu_hotplug.lock){+.+.+.} ops: 829 { [ 309.661553] HARDIRQ-ON-W at: [ 309.661560] __lock_acquire+0x5e5/0x1b50 [ 309.661565] lock_acquire+0xc9/0x220 [ 309.661572] __mutex_lock+0x6e/0x990 [ 309.661576] mutex_lock_nested+0x16/0x20 [ 309.661583] get_online_cpus+0x61/0x80 [ 309.661590] kmem_cache_create+0x25/0x1d0 [ 309.661596] debug_objects_mem_init+0x30/0x249 [ 309.661602] start_kernel+0x341/0x3fe [ 309.661607] x86_64_start_reservations+0x2a/0x2c [ 309.661612] x86_64_start_kernel+0x173/0x186 [ 309.661619] verify_cpu+0x0/0xfc [ 309.661622] SOFTIRQ-ON-W at: [ 309.661627] __lock_acquire+0x611/0x1b50 [ 309.661632] lock_acquire+0xc9/0x220 [ 309.661636] __mutex_lock+0x6e/0x990 [ 309.661641] mutex_lock_nested+0x16/0x20 [ 309.661646] get_online_cpus+0x61/0x80 [ 309.661650] kmem_cache_create+0x25/0x1d0 [ 309.661655] debug_objects_mem_init+0x30/0x249 [ 309.661660] start_kernel+0x341/0x3fe [ 309.661664] x86_64_start_reservations+0x2a/0x2c [ 309.661669] x86_64_start_kernel+0x173/0x186 [ 309.661674] verify_cpu+0x0/0xfc [ 309.661677] RECLAIM_FS-ON-W at: [ 309.661682] mark_held_locks+0x6f/0xa0 [ 309.661687] lockdep_trace_alloc+0xb3/0x100 [ 309.661693] kmem_cache_alloc_trace+0x31/0x2e0 [ 309.661699] __smpboot_create_thread.part.1+0x27/0xe0 [ 309.661704] smpboot_create_threads+0x61/0x90 [ 309.661709] cpuhp_invoke_callback+0x9c/0x8a0 [ 309.661713] cpuhp_up_callbacks+0x31/0xb0 [ 309.661718] _cpu_up+0x7a/0xc0 [ 309.661723] do_cpu_up+0x5f/0x80 [ 309.661727] cpu_up+0xe/0x10 [ 309.661734] smp_init+0x71/0xb3 [ 309.661738] kernel_init_freeable+0x94/0x19e [ 309.661743] kernel_init+0x9/0xf0 [ 309.661748] ret_from_fork+0x2e/0x40 [ 309.661752] INITIAL USE at: [ 309.661757] __lock_acquire+0x234/0x1b50 [ 309.661761] lock_acquire+0xc9/0x220 [ 309.661766] __mutex_lock+0x6e/0x990 [ 309.661771] mutex_lock_nested+0x16/0x20 [ 309.661775] get_online_cpus+0x61/0x80 [ 309.661780] __cpuhp_setup_state+0x44/0x170 [ 309.661785] page_alloc_init+0x23/0x3a [ 309.661790] start_kernel+0x124/0x3fe [ 309.661794] x86_64_start_reservations+0x2a/0x2c [ 309.661799] x86_64_start_kernel+0x173/0x186 [ 309.661804] verify_cpu+0x0/0xfc [ 309.661807] } [ 309.661813] ... key at: [<ffffffff81e37690>] cpu_hotplug+0xb0/0x100 [ 309.661817] ... acquired at: [ 309.661821] lock_acquire+0xc9/0x220 [ 309.661825] __mutex_lock+0x6e/0x990 [ 309.661829] mutex_lock_nested+0x16/0x20 [ 309.661833] get_online_cpus+0x61/0x80 [ 309.661837] _rcu_barrier+0x9f/0x160 [ 309.661841] rcu_barrier+0x10/0x20 [ 309.661847] netdev_run_todo+0x5f/0x310 [ 309.661852] rtnl_unlock+0x9/0x10 [ 309.661856] default_device_exit_batch+0x133/0x150 [ 309.661862] ops_exit_list.isra.0+0x4d/0x60 [ 309.661866] cleanup_net+0x1d8/0x2c0 [ 309.661872] process_one_work+0x1f4/0x6d0 [ 309.661876] worker_thread+0x49/0x4a0 [ 309.661881] kthread+0x107/0x140 [ 309.661884] ret_from_fork+0x2e/0x40 [ 309.661890] -> (rcu_preempt_state.barrier_mutex){+.+.-.} ops: 179 { [ 309.661896] HARDIRQ-ON-W at: [ 309.661901] __lock_acquire+0x5e5/0x1b50 [ 309.661905] lock_acquire+0xc9/0x220 [ 309.661910] __mutex_lock+0x6e/0x990 [ 309.661914] mutex_lock_nested+0x16/0x20 [ 309.661919] _rcu_barrier+0x31/0x160 [ 309.661923] rcu_barrier+0x10/0x20 [ 309.661928] netdev_run_todo+0x5f/0x310 [ 309.661932] rtnl_unlock+0x9/0x10 [ 309.661936] default_device_exit_batch+0x133/0x150 [ 309.661941] ops_exit_list.isra.0+0x4d/0x60 [ 309.661946] cleanup_net+0x1d8/0x2c0 [ 309.661951] process_one_work+0x1f4/0x6d0 [ 309.661955] worker_thread+0x49/0x4a0 [ 309.661960] kthread+0x107/0x140 [ 309.661964] ret_from_fork+0x2e/0x40 [ 309.661968] SOFTIRQ-ON-W at: [ 309.661972] __lock_acquire+0x611/0x1b50 [ 309.661977] lock_acquire+0xc9/0x220 [ 309.661981] __mutex_lock+0x6e/0x990 [ 309.661986] mutex_lock_nested+0x16/0x20 [ 309.661990] _rcu_barrier+0x31/0x160 [ 309.661995] rcu_barrier+0x10/0x20 [ 309.661999] netdev_run_todo+0x5f/0x310 [ 309.662003] rtnl_unlock+0x9/0x10 [ 309.662008] default_device_exit_batch+0x133/0x150 [ 309.662013] ops_exit_list.isra.0+0x4d/0x60 [ 309.662017] cleanup_net+0x1d8/0x2c0 [ 309.662022] process_one_work+0x1f4/0x6d0 [ 309.662027] worker_thread+0x49/0x4a0 [ 309.662031] kthread+0x107/0x140 [ 309.662035] ret_from_fork+0x2e/0x40 [ 309.662039] IN-RECLAIM_FS-W at: [ 309.662043] __lock_acquire+0x638/0x1b50 [ 309.662048] lock_acquire+0xc9/0x220 [ 309.662053] __mutex_lock+0x6e/0x990 [ 309.662058] mutex_lock_nested+0x16/0x20 [ 309.662062] _rcu_barrier+0x31/0x160 [ 309.662067] rcu_barrier+0x10/0x20 [ 309.662089] i915_gem_shrink_all+0x33/0x40 [i915] [ 309.662109] i915_drop_caches_set+0x141/0x150 [i915] [ 309.662114] simple_attr_write+0xc7/0xe0 [ 309.662119] full_proxy_write+0x4f/0x70 [ 309.662124] __vfs_write+0x23/0x120 [ 309.662128] vfs_write+0xc6/0x1f0 [ 309.662133] SyS_write+0x44/0xb0 [ 309.662138] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 309.662142] INITIAL USE at: [ 309.662147] __lock_acquire+0x234/0x1b50 [ 309.662151] lock_acquire+0xc9/0x220 [ 309.662156] __mutex_lock+0x6e/0x990 [ 309.662160] mutex_lock_nested+0x16/0x20 [ 309.662165] _rcu_barrier+0x31/0x160 [ 309.662169] rcu_barrier+0x10/0x20 [ 309.662174] netdev_run_todo+0x5f/0x310 [ 309.662178] rtnl_unlock+0x9/0x10 [ 309.662183] default_device_exit_batch+0x133/0x150 [ 309.662188] ops_exit_list.isra.0+0x4d/0x60 [ 309.662192] cleanup_net+0x1d8/0x2c0 [ 309.662197] process_one_work+0x1f4/0x6d0 [ 309.662202] worker_thread+0x49/0x4a0 [ 309.662206] kthread+0x107/0x140 [ 309.662210] ret_from_fork+0x2e/0x40 [ 309.662214] } [ 309.662220] ... key at: [<ffffffff81e4e1c8>] rcu_preempt_state+0x508/0x780 [ 309.662225] ... acquired at: [ 309.662229] check_usage_forwards+0x12b/0x130 [ 309.662233] mark_lock+0x360/0x6f0 [ 309.662237] __lock_acquire+0x638/0x1b50 [ 309.662241] lock_acquire+0xc9/0x220 [ 309.662245] __mutex_lock+0x6e/0x990 [ 309.662249] mutex_lock_nested+0x16/0x20 [ 309.662253] _rcu_barrier+0x31/0x160 [ 309.662257] rcu_barrier+0x10/0x20 [ 309.662279] i915_gem_shrink_all+0x33/0x40 [i915] [ 309.662298] i915_drop_caches_set+0x141/0x150 [i915] [ 309.662303] simple_attr_write+0xc7/0xe0 [ 309.662307] full_proxy_write+0x4f/0x70 [ 309.662311] __vfs_write+0x23/0x120 [ 309.662315] vfs_write+0xc6/0x1f0 [ 309.662319] SyS_write+0x44/0xb0 [ 309.662323] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 309.662329] stack backtrace: [ 309.662335] CPU: 1 PID: 6435 Comm: gem_exec_gttfil Tainted: G W 4.11.0-rc1-CI-CI_DRM_2333+ #1 [ 309.662342] Hardware name: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011 [ 309.662348] Call Trace: [ 309.662354] dump_stack+0x67/0x92 [ 309.662359] print_irq_inversion_bug.part.19+0x1a4/0x1b0 [ 309.662365] check_usage_forwards+0x12b/0x130 [ 309.662369] mark_lock+0x360/0x6f0 [ 309.662374] ? print_shortest_lock_dependencies+0x1a0/0x1a0 [ 309.662379] __lock_acquire+0x638/0x1b50 [ 309.662383] ? __mutex_unlock_slowpath+0x3e/0x2e0 [ 309.662388] ? trace_hardirqs_on+0xd/0x10 [ 309.662392] ? _rcu_barrier+0x31/0x160 [ 309.662396] lock_acquire+0xc9/0x220 [ 309.662400] ? _rcu_barrier+0x31/0x160 [ 309.662404] ? _rcu_barrier+0x31/0x160 [ 309.662409] __mutex_lock+0x6e/0x990 [ 309.662412] ? _rcu_barrier+0x31/0x160 [ 309.662416] ? _rcu_barrier+0x31/0x160 [ 309.662421] ? synchronize_rcu_expedited+0x35/0xb0 [ 309.662426] ? _raw_spin_unlock_irqrestore+0x52/0x60 [ 309.662434] mutex_lock_nested+0x16/0x20 [ 309.662438] _rcu_barrier+0x31/0x160 [ 309.662442] rcu_barrier+0x10/0x20 [ 309.662464] i915_gem_shrink_all+0x33/0x40 [i915] [ 309.662484] i915_drop_caches_set+0x141/0x150 [i915] [ 309.662489] simple_attr_write+0xc7/0xe0 [ 309.662494] full_proxy_write+0x4f/0x70 [ 309.662498] __vfs_write+0x23/0x120 [ 309.662503] ? rcu_read_lock_sched_held+0x75/0x80 [ 309.662507] ? rcu_sync_lockdep_assert+0x2a/0x50 [ 309.662512] ? __sb_start_write+0x102/0x210 [ 309.662516] ? vfs_write+0x17d/0x1f0 [ 309.662520] vfs_write+0xc6/0x1f0 [ 309.662524] ? trace_hardirqs_on_caller+0xe7/0x200 [ 309.662529] SyS_write+0x44/0xb0 [ 309.662533] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 309.662537] RIP: 0033:0x7f507eac24a0 [ 309.662541] RSP: 002b:00007fffda8720e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 309.662548] RAX: ffffffffffffffda RBX: ffffffff81482bd3 RCX: 00007f507eac24a0 [ 309.662552] RDX: 0000000000000005 RSI: 00007fffda8720f0 RDI: 0000000000000005 [ 309.662557] RBP: ffffc9000048bf88 R08: 0000000000000000 R09: 000000000000002c [ 309.662561] R10: 0000000000000014 R11: 0000000000000246 R12: 00007fffda872230 [ 309.662566] R13: 00007fffda872228 R14: 0000000000000201 R15: 00007fffda8720f0 [ 309.662572] ? __this_cpu_preempt_check+0x13/0x20 Fixes: 0eafec6d3244 ("drm/i915: Enable lockless lookup of request tracking via RCU") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100192 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> # v4.9+ Link: http://patchwork.freedesktop.org/patch/msgid/20170314115019.18127-1-chris@chris-wilson.co.uk Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit bd784b7cc41af7a19cfb705fa6d800e511c4ab02) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170321144531.12344-1-chris@chris-wilson.co.uk 21 March 2017, 14:50:19 UTC
6e5364f Ping Cheng 15 March 2017, 00:08:16 UTC HID: wacom: generic: Wacom mouse is only provided for opaque tablets Commit f85c9dc ("Support tool ID and additional tool types") introduced mouse and lens cursor tools to generic codepath, which covers both display (direct) and opaque tablets (indirect devices). However, mouse and lens cursor tools are only provided for opaque tablets. This patch ignores mouse and lens cursor tools if the device is a display tablet. Signed-off-by: Ping Cheng <ping.cheng@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 21 March 2017, 13:48:29 UTC
01adc47 Oscar Campos 06 March 2017, 21:02:39 UTC HID: corsair: Add driver Scimitar Pro RGB gaming mouse 1b1c:1b3e support to hid-corsair This mouse sold by Corsair as Scimitar PRO RGB defines two consecutive Logical Minimum items in its Application (Consumer.0001) report making it non parseable. This patch fixes the report descriptor overriding byte 77 in rdesc from 0x16 (Logical Minimum with 16 bits value) to 0x26 (Logical Maximum with 16 bits value). Signed-off-by: Oscar Campos <oscar.campos@member.fsf.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 21 March 2017, 13:46:15 UTC
deaba63 Oscar Campos 10 February 2017, 18:23:00 UTC HID: corsair: support for K65-K70 Rapidfire and Scimitar Pro RGB Add quirks for several corsair gaming devices to avoid long delays on report initialization Supported devices: - Corsair K65RGB Rapidfire Gaming Keyboard - Corsair K70RGB Rapidfire Gaming Keyboard - Corsair Scimitar Pro RGB Gaming Mouse Signed-off-by: Oscar Campos <oscar.campos@member.fsf.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 21 March 2017, 13:46:15 UTC
b6b1f19 Aaron Armstrong Skomra 06 March 2017, 18:54:58 UTC HID: wacom: don't manually release resources for the EKR Commit 5b779fc introduces the manual release of resources in wacom_remove() as an addition to the driver's use of devm. The EKR resources can only be released through wacom_remote_destroy_one() so we skip the manual release for it. Fixes: 5b779fc ("HID: wacom: release the resources before leaving despite devm") Signed-off-by: Aaron Armstrong Skomra <skomra@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 21 March 2017, 13:44:37 UTC
49cc4c2 Aaron Armstrong Skomra 06 March 2017, 18:54:57 UTC HID: wacom: Correct Intuos Pro 2 resolution The features struct for the second gen Intuos Pro uses the wrong constant for the resolution. This fix is for commit 4922cd2. Fixes: 4922cd2 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface") Signed-off-by: Aaron Armstrong Skomra <skomra@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 21 March 2017, 13:44:37 UTC
c520ff3 Takashi Iwai 21 March 2017, 12:56:04 UTC ALSA: seq: Fix racy cell insertions during snd_seq_pool_done() When snd_seq_pool_done() is called, it marks the closing flag to refuse the further cell insertions. But snd_seq_pool_done() itself doesn't clear the cells but just waits until all cells are cleared by the caller side. That is, it's racy, and this leads to the endless stall as syzkaller spotted. This patch addresses the racy by splitting the setup of pool->closing flag out of snd_seq_pool_done(), and calling it properly before snd_seq_pool_done(). BugLink: http://lkml.kernel.org/r/CACT4Y+aqqy8bZA1fFieifNxR2fAfFQQABcBHj801+u5ePV0URw@mail.gmail.com Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 21 March 2017, 13:01:10 UTC
c6736a9 Takashi Iwai 21 March 2017, 12:26:02 UTC ALSA: x86: Make CONFIG_SND_X86 bool CONFIG_SND_X86 is a menu config to filter only for x86-specific drivers in its sub-menu, and this doesn't have to be tristate but rather it should be a bool. Also, like other sub-menu configs, it's more user-friendly to be default=y; it's merely a menu config and the actual drivers are configured in the sub-menu, after all. Fixes: 287599cf2d77 ("ALSA: add Intel HDMI LPE audio driver for BYT/CHT-T") Signed-off-by: Takashi Iwai <tiwai@suse.de> 21 March 2017, 12:26:02 UTC
cc638a4 Andrew Donnellan 20 March 2017, 06:55:22 UTC gcc-plugins: update architecture list in documentation Commit 65c059bcaa73 ("powerpc: Enable support for GCC plugins") enabled GCC plugins on powerpc, but neglected to update the architecture list in the docs. Rectify this. Fixes: 65c059bcaa73 ("powerpc: Enable support for GCC plugins") Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 21 March 2017, 11:20:05 UTC
fc36a90 Paul Mackerras 21 March 2017, 01:38:02 UTC Revert "powerpc/64: Disable use of radix under a hypervisor" This reverts commit 3f91a89d424a79f8082525db5a375e438887bb3e. Now that we do have the machinery for using the radix MMU under a hypervisor, the extra check and comment introduced in 3f91a89d424a are no longer correct. The result is that when booted under a hypervisor that only allows use of radix, we clear the MMU_FTR_TYPE_RADIX and then set it again, and print a warning about ignoring the disable_radix command line option, even though the command line does not include "disable_radix". Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 21 March 2017, 05:50:28 UTC
22e098d Andrzej Hajda 15 March 2017, 11:20:42 UTC drm/exynos/dsi: make te-gpios optional DSI forwards te-gpios interrupts to display controller, but if display controller works in HW-TRIGGER mode this interrupt is not necessary. Making te-gpios property optional allows to avoid generating spare interrupts. And also if panel device node of command mode panel device doesn't provide te-gpios property then the panel driver failed to probe. This was a critial issue. With this patch we can not only get rid of 60 interrupt callbacks per second but also fix the critial issues. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> 21 March 2017, 05:30:18 UTC
9cdf0ed Krzysztof Kozlowski 14 March 2017, 18:38:04 UTC drm/exynos: Print kernel pointers in a restricted form Printing raw kernel pointers might reveal information which sometimes we try to hide (e.g. with Kernel Address Space Layout Randomization). Use the "%pK" format so these pointers will be hidden for unprivileged users. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> 21 March 2017, 04:17:22 UTC
f07d9c2 Andrzej Hajda 14 March 2017, 08:28:00 UTC drm/exynos/decon5433: fix software trigger mask The patch fixes copy/paste bug introduced during code refactoring. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: b93c2e8b5d9d ("drm/exynos/decon5433: configure sysreg in case of hardware trigger")Fixes: Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> 21 March 2017, 04:17:22 UTC
82a0178 Andrzej Hajda 14 March 2017, 08:27:59 UTC drm/exynos/fimd: signal frame done interrupt at front porch VBLANK interrupt should be signalled as soon as scanout ends, front porch is the best moment. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> 21 March 2017, 04:17:22 UTC
f3cce67 Andrzej Hajda 14 March 2017, 08:27:58 UTC drm/exynos/decon5433: signal frame done interrupt at front porch DECON in case of video mode generates interrupt by default at start of vertical back porch. As this interrupt is used to generate VBLANK events more optimal point is start of vertical front porch. Signed-off-by: Inki Dae <inki.dae@samsung.com> 21 March 2017, 04:17:22 UTC
7348833 Andrzej Hajda 14 March 2017, 08:27:57 UTC drm/exynos/decon5433: fix vblank event handling Current implementation of event handling assumes that vblank interrupt is always called at the right time. It is not true, it can be delayed due to various reasons. As a result different races can happen. The patch fixes the issue by using hardware frame counter present in DECON to serialize vblank and commit completion events. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> 21 March 2017, 04:17:21 UTC
a392276 Andrzej Hajda 14 March 2017, 08:27:56 UTC drm/exynos: move crtc event handling to drivers callbacks CRTC event is currently send with next vblank, or instantly in case crtc is being disabled. This approach usually works, but in corner cases it can result in premature event generation. Only device driver is able to verify if the event can be sent. This patch is a first step in that direction - it moves event handling to the drivers. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> 21 March 2017, 04:17:21 UTC
6bdc92e Krzysztof Kozlowski 11 March 2017, 18:04:16 UTC drm/exynos: Remove support for Exynos4415 (SoC not supported anymore) Support for Exynos4415 is going away because there are no internal nor external users. Since commit 46dcf0ff0de3 ("ARM: dts: exynos: Remove exynos4415.dtsi"), the platform cannot be instantiated so remove also the drivers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Kukjin Kim <kgene@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> 21 March 2017, 04:17:21 UTC
ac7ce78 Dan Carpenter 14 February 2017, 07:46:20 UTC drm/exynos/decon5433: & vs | typo "&" was obviously intended instead of "|". The original condition is always true. Fixes: b93c2e8b5d9d ("drm/exynos/decon5433: configure sysreg in case of hardware trigger") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> 21 March 2017, 04:17:20 UTC
4296f23 Rafael J. Wysocki 19 March 2017, 13:30:02 UTC cpufreq: schedutil: Fix per-CPU structure initialization in sugov_start() sugov_start() only initializes struct sugov_cpu per-CPU structures for shared policies, but it should do that for single-CPU policies too. That in particular makes the IO-wait boost mechanism work in the cases when cpufreq policies correspond to individual CPUs. Fixes: 21ca6d2c52f8 (cpufreq: schedutil: Add iowait boosting) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ 21 March 2017, 00:03:08 UTC
c3104aa Arnd Bergmann 13 March 2017, 16:36:25 UTC remoteproc: qcom: fix QCOM_SMD dependencies qcom_smd_register_edge() is provided by either QCOM_SMD or RPMSG_QCOM_SMD, and if both of them are disabled, it does nothing. The check for the PIL drivers however only checks for QCOM_SMD, so it breaks with QCOM_SMD=n && RPMSG_QCOM_SMD=m: drivers/remoteproc/built-in.o: In function `smd_subdev_remove': qcom_wcnss_iris.c:(.text+0x231c): undefined reference to `qcom_smd_unregister_edge' drivers/remoteproc/built-in.o: In function `smd_subdev_probe': qcom_wcnss_iris.c:(.text+0x2344): undefined reference to `qcom_smd_register_edge' drivers/remoteproc/built-in.o: In function `smd_subdev_probe': qcom_q6v5_pil.c:(.text+0x3538): undefined reference to `qcom_smd_register_edge' qcom_q6v5_pil.c:(.text+0x3538): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `qcom_smd_register_edge' This clarifies the Kconfig dependency. Fixes: 4b48921a8f74 ("remoteproc: qcom: Use common SMD edge handler") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> 20 March 2017, 21:45:44 UTC
6be3b6c Ryan Hsu 13 March 2017, 22:49:03 UTC ath10k: fix incorrect wlan_mac_base in qca6174_regs In the 'commit ebee76f7fa46 ("ath10k: allow setting coverage class")', it inherits the design and the address offset from ath9k, but the address is not applicable to QCA6174, which leads to a random crash while doing the resume() operation, since the set_coverage_class.ops will be called from ieee80211_reconfig() when resume() (if the wow is not configured). Fix the incorrect address offset here to avoid the random crash. Verified on QCA6174/hw3.0 with firmware WLAN.RM.4.4-00022-QCARMSWPZ-2. kvalo: this also seems to fix a regression with firmware restart. Fixes: ebee76f7fa46 ("ath10k: allow setting coverage class") Cc: <stable@vger.kernel.org> # v4.10 Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> 20 March 2017, 15:11:31 UTC
7041d5d Chao Yu 08 March 2017, 12:07:49 UTC f2fs: combine nat_bits and free_nid_bitmap cache Both nat_bits cache and free_nid_bitmap cache provide same functionality as a intermediate cache between free nid cache and disk, but with different granularity of indicating free nid range, and different persistence policy. nat_bits cache provides better persistence ability, and free_nid_bitmap provides better granularity. In this patch we combine advantage of both caches, so finally policy of the intermediate cache would be: - init: load free nid status from nat_bits into free_nid_bitmap - lookup: scan free_nid_bitmap before load NAT blocks - update: update free_nid_bitmap in real-time - persistence: udpate and persist nat_bits in checkpoint This patch also resolves performance regression reported by lkp-robot. commit: 4ac912427c4214d8031d9ad6fbc3bc75e71512df ("f2fs: introduce free nid bitmap") d00030cf9cd0bb96fdccc41e33d3c91dcbb672ba ("f2fs: use __set{__clear}_bit_le") 1382c0f3f9d3f936c8bc42ed1591cf7a593ef9f7 ("f2fs: combine nat_bits and free_nid_bitmap cache") 4ac912427c4214d8 d00030cf9cd0bb96fdccc41e33 1382c0f3f9d3f936c8bc42ed15 ---------------- -------------------------- -------------------------- %stddev %change %stddev %change %stddev \ | \ | \ 77863 ± 0% +2.1% 79485 ± 1% +50.8% 117404 ± 0% aim7.jobs-per-min 231.63 ± 0% -2.0% 227.01 ± 1% -33.6% 153.80 ± 0% aim7.time.elapsed_time 231.63 ± 0% -2.0% 227.01 ± 1% -33.6% 153.80 ± 0% aim7.time.elapsed_time.max 896604 ± 0% -0.8% 889221 ± 3% -20.2% 715260 ± 1% aim7.time.involuntary_context_switches 2394 ± 1% +4.6% 2503 ± 1% +3.7% 2481 ± 2% aim7.time.maximum_resident_set_size 6240 ± 0% -1.5% 6145 ± 1% -14.1% 5360 ± 1% aim7.time.system_time 1111357 ± 3% +1.9% 1132509 ± 2% -6.2% 1041932 ± 2% aim7.time.voluntary_context_switches ... Signed-off-by: Chao Yu <yuchao0@huawei.com> Tested-by: Xiaolong Ye <xiaolong.ye@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> 20 March 2017, 14:00:18 UTC
586d149 Chao Yu 01 March 2017, 09:09:07 UTC f2fs: skip scanning free nid bitmap of full NAT blocks This patch adds to account free nids for each NAT blocks, and while scanning all free nid bitmap, do check count and skip lookuping in full NAT block. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> 20 March 2017, 14:00:17 UTC
23380b8 Jaegeuk Kim 07 March 2017, 22:11:06 UTC f2fs: use __set{__clear}_bit_le This patch uses __set{__clear}_bit_le for highter speed. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> 20 March 2017, 14:00:16 UTC
9f7e4a2 Jaegeuk Kim 10 March 2017, 17:39:57 UTC f2fs: declare static functions This is to avoid build warning reported by kbuild test robot. Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> 20 March 2017, 14:00:15 UTC
720037f Jaegeuk Kim 06 March 2017, 19:59:56 UTC f2fs: don't overwrite node block by SSR This patch fixes that SSR can overwrite previous warm node block consisting of a node chain since the last checkpoint. Fixes: 5b6c6be2d878 ("f2fs: use SSR for warm node as well") Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> 20 March 2017, 14:00:14 UTC
fdfe4a3 Stafford Horne 13 March 2017, 14:45:21 UTC generic syscalls: Wire up statx syscall The new syscall statx is implemented as generic code, so enable it for architectures like openrisc which use the generic syscall table. Fixes: a528d35e8bfcc ("statx: Add a system call to make enhanced file info available") Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> 20 March 2017, 12:32:37 UTC
cc3a47a Jaroslav Kysela 09 March 2017, 12:30:09 UTC ALSA: hda - add support for docking station for HP 840 G3 This tested patch adds missing initialization for Line-In/Out PINs for the docking station for HP 840 G3. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> 20 March 2017, 11:18:05 UTC
04d5466 Jaroslav Kysela 09 March 2017, 12:29:13 UTC ALSA: hda - add support for docking station for HP 820 G2 This tested patch adds missing initialization for Line-In/Out PINs for the docking station for HP 820 G2. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> 20 March 2017, 11:18:00 UTC
back to top