Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
19e5c4e Dave Airlie 12 April 2012, 12:01:57 UTC Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-intel-fixes Daniel Vetter writes: 3 regression fixes: - disable gmbus again, too broken for 3.4, we'll try again for 3.5 - dp bandwidth computation fix, we've lost the 6bpc dithering flag sometimes, this is a 3.3 regression (maybe even earlier for some configurations). - fix resume regression caused by the gen2/3 fencing fix merged into -rc2. And a few other fixes: - gpu hang fix for i845 (Chris) - sprite fix (Armin Reese) - crtc disable vs. scanlinewait race fix (Chris) - rc6 module option read-only, it confused testers (Jesse) - fbc related blitter death hw workaround, note that we disable fbc on snb by default anyway. With these fixes we have one 3.4 regression outstanding: One of the cleanup patches for the interlaced support managed to confuse the lvds panel fitter when upscaling. The root-cause is still unclear, but test patches are awaiting feedback from the reporter. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: clear fencing tracking state when retiring requests drm/i915: make rc6 module parameter read-only drm/i915: implement ColorBlt w/a drm/i915/ringbuffer: Exclude last 2 cachlines of ring on 845g Revert "drm/i915: reenable gmbus on gen3+ again" drm/i915: properly compute dp dithering for user-created modes drm/i915: Finish any pending operations on the framebuffer before disabling drm/i915: Removed IVB forced enable of sprite dest key. 12 April 2012, 16:41:10 UTC
15a13bb Daniel Vetter 11 April 2012, 23:27:57 UTC drm/i915: clear fencing tracking state when retiring requests This fixes a resume regression introduced in commit 7dd4906586274f3945f2aeaaa5a33b451c3b4bba Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Mar 21 10:48:18 2012 +0000 drm/i915: Mark untiled BLT commands as fenced on gen2/3 which fixed fencing tracking for untiled blt commands. A side effect of that patch was that now also untiled objects have a non-zero obj->last_fenced_seqno to track when a fence can be set up after a pipelined tiling change. Unfortunately this was only cleared by the fence setup and teardown code, resulting in tons of untiled but inactive objects with non-zero last_fenced_seqno. Now after resume we completely reset the seqno tracking, both on the driver side (by setting dev_priv->next_seqno = 1) and on the hw side (by allocating a new hws page, which contains the seqnos). Hilarity and indefinite waits ensued from the stale seqnos in obj->last_fenced_seqno from before the suspend. The fix is to properly clear the fencing tracking state like we already do for the normal gpu rendering while moving objects off the active list. Reported-and-tested-by: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Jiri Slaby <jslaby@suse.cz> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 12 April 2012, 07:02:37 UTC
f57f9c1 Jesse Barnes 11 April 2012, 16:39:02 UTC drm/i915: make rc6 module parameter read-only People have been getting confused and thinking this is a runtime control. Cc: stable@vger.kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 11 April 2012, 19:36:38 UTC
80e829f Daniel Vetter 31 March 2012, 09:21:57 UTC drm/i915: implement ColorBlt w/a According to an internal workaround master list, we need to set bit 5 of register 9400 to avoid issues with color blits. Testing shows that this seems to fix the blitter hangs when fbc is enabled on snb, thanks to Chris Wilson for figuring this out. Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Michael "brot" Groh <michael.groh@minad.de> Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 11 April 2012, 10:16:53 UTC
27c1cbd Chris Wilson 09 April 2012, 12:59:46 UTC drm/i915/ringbuffer: Exclude last 2 cachlines of ring on 845g The 845g shares the errata with i830 whereby executing a command within 2 cachelines of the end of the ringbuffer may cause a GPU hang. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 11 April 2012, 10:14:24 UTC
6a562e3 Daniel Vetter 09 April 2012, 19:10:38 UTC Revert "drm/i915: reenable gmbus on gen3+ again" This reverts commit c3dfefa0a6d235bd465309e12f4c56ea16e71111. gmbus in 3.4 has simply too many known issues: - gmbus is too noisy, we need to rework the logging: https://bugs.freedesktop.org/show_bug.cgi?id=48248 - zero-length writes cause an OOPS, and they are userspace-triggerable: https://lkml.org/lkml/2012/3/30/176 - same for zero-length reads: https://bugs.freedesktop.org/show_bug.cgi?id=48269 We can try again for 3.5. Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 11 April 2012, 10:11:23 UTC
4678315 Alex Deucher 10 April 2012, 16:14:27 UTC drm/radeon: only add the mm i2c bus if the hw_i2c module param is set It seems it can corrupt the monitor EDID in certain cases on certain boards when running sensors detect. It's rarely used anyway outside of AIW boards. http://lists.lm-sensors.org/pipermail/lm-sensors/2012-April/035847.html http://lists.freedesktop.org/archives/xorg/2011-January/052239.html Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dave Airlie <airlied@redhat.com> 11 April 2012, 08:36:53 UTC
6069a4c Randy Dunlap 30 January 2012, 19:43:52 UTC vgaarb.h: fix build warnings Fix build warnings by providing a struct stub since no fields of the struct are used: include/linux/vgaarb.h:66:9: warning: 'struct pci_dev' declared inside parameter list include/linux/vgaarb.h:66:9: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/vgaarb.h:99:34: warning: 'struct pci_dev' declared inside parameter list include/linux/vgaarb.h:109:6: warning: 'struct pci_dev' declared inside parameter list include/linux/vgaarb.h:121:8: warning: 'struct pci_dev' declared inside parameter list include/linux/vgaarb.h:140:37: warning: 'struct pci_dev' declared inside parameter list Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Dave Airlie <airlied@redhat.com> 11 April 2012, 08:36:00 UTC
c486793 Daniel Vetter 10 April 2012, 08:42:36 UTC drm/i915: properly compute dp dithering for user-created modes We've only computed whether we need to fall back to 6bpc due to dp link bandwidth constrains in mode_valid, but not mode_fixup. Under various circumstances X likes to create new modes which then lack proper 6bpc flags (if required), resulting in mode_fixup failures and ultimately black screens. Chris Wilson pointed out that we still get things wrong for bpp > 24, but that should be fixed in another patch (and it'll be easier because this patch consolidates the logic). The likely culprit for this regression is commit 3d794f87238f74d80e78a7611c7fbde8a54c85c2 Author: Keith Packard <keithp@keithp.com> Date: Wed Jan 25 08:16:25 2012 -0800 drm/i915: Force explicit bpp selection for intel_dp_link_required v2: Fix indentation and tune down the too bold claim that this should fix the world. Both noticed by Chris Wilson. v3: Try to really git add things. Reported-and-tested-by: Brice Goglin <Brice.Goglin@ens-lyon.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48170 Cc: stable@kernel.org Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 10 April 2012, 17:23:02 UTC
afceb93 Alex Deucher 03 April 2012, 21:05:41 UTC drm/radeon/kms: fix DVO setup on some r4xx chips Some r4xx chips have the wrong frev in the DVOEncoderControl table. It should always be 1 on r4xx. Fixes modesetting on DVO on r4xx chips with the bad frev. Reported by twied on #radeon. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 10 April 2012, 09:27:46 UTC
6587eb8 Xi Wang 06 April 2012, 21:38:24 UTC drm/savage: fix integer overflows in savage_bci_cmdbuf() Since cmdbuf->size and cmdbuf->nbox are from userspace, a large value would overflow the allocation size, leading to out-of-bounds access. Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 10 April 2012, 09:22:51 UTC
4de833c Arnd Bergmann 05 April 2012, 18:58:22 UTC drm/radeon: replace udelay with mdelay for long timeouts Some architectures require that delays longer than a few miliseconds are called through mdelay. This was triggered on ARM randconfig builds. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Dave Airlie <airlied@redhat.com> 10 April 2012, 09:21:00 UTC
258f742 Frank Rowand 10 April 2012, 00:59:03 UTC modpost: Fix modpost license checking of vmlinux.o Commit f02e8a6596b7 ("module: Sort exported symbols") sorts symbols placing each of them in its own elf section. This sorting and merging into the canonical sections are done by the linker. Unfortunately modpost to generate Module.symvers file parses vmlinux.o (which is not linked yet) and all modules object files (which aren't linked yet). These aren't sanitized by the linker yet. That breaks modpost that can't detect license properly for modules. This patch makes modpost aware of the new exported symbols structure. [ This above is a slightly corrected version of the explanation of the problem, copied from commit 62a2635610db ("modpost: Fix modpost's license checking V3"). That commit fixed the problem for module object files, but not for vmlinux.o. This patch fixes modpost for vmlinux.o. ] Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Alessio Igor Bogani <abogani@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 10 April 2012, 03:52:56 UTC
83dbbdb David Rientjes 09 April 2012, 23:56:18 UTC android, lowmemorykiller: remove task handoff notifier The task handoff notifier leaks task_struct since it never gets freed after the callback returns NOTIFY_OK, which means it is responsible for doing so. It turns out the lowmemorykiller actually doesn't need this notifier at all. It's used to prevent unnecessary killing by waiting for a thread to exit as a result of lowmem_shrink(), however, it's possible to do this in the same way the kernel oom killer works by setting TIF_MEMDIE and avoid killing if we're still waiting for it to exit. The kernel oom killer will already automatically set TIF_MEMDIE for threads that are attempting to allocate memory that have a fatal signal. The thread selected by lowmem_shrink() will have such a signal after the lowmemorykiller sends it a SIGKILL, so this won't result in an unnecessary use of memory reserves for the thread to exit. This has the added benefit that we don't have to rely on CONFIG_PROFILING to prevent needlessly killing tasks. Reported-by: Werner Landgraf <w.landgraf@ru.ru> Cc: stable@vger.kernel.org Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 10 April 2012, 03:48:44 UTC
14667a4 Chris Wilson 03 April 2012, 16:58:35 UTC drm/i915: Finish any pending operations on the framebuffer before disabling Similar to the case where we are changing from one framebuffer to another, we need to be sure that there are no pending WAIT_FOR_EVENTs on the pipe for the current framebuffer before switching. If we disable the pipe, and then try to execute a WAIT_FOR_EVENT it will block indefinitely and cause a GPU hang. We attempted to fix this in commit 85345517fe6d4de27b0d6ca19fef9d28ac947c4a (drm/i915: Retire any pending operations on the old scanout when switching) for the case of mode switching, but this leaves the condition where we are switching off the pipe vulnerable. There still remains the race condition were a display may be unplugged, switched off by the core, a uevent sent to notify the DDX and the DDX may issue a WAIT_FOR_EVENT before it processes the uevent. This window does not exist if the pipe is only switched off in response to the uevent. Time to make sure that is so... Reported-by: Francis Leblanc <Francis.Leblanc-Lebeau@verint.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36515 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45413 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> [danvet: fixup spelling in comment, noticed by Eugeni.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 09 April 2012, 19:53:30 UTC
b2a7164 acreese 04 April 2012, 23:22:32 UTC drm/i915: Removed IVB forced enable of sprite dest key. The destination color key is always enabled for IVB. Removed the line that does this. Signed-off-by: Armin Reese <armin.c.reese@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 09 April 2012, 19:53:20 UTC
0034102 Linus Torvalds 08 April 2012, 01:30:41 UTC Linux 3.4-rc2 08 April 2012, 01:30:41 UTC
f4e52e7 Linus Torvalds 07 April 2012, 16:56:00 UTC Merge tag 'regmap-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull two more small regmap fixes from Mark Brown: - Now we have users for it that aren't running Android it turns out that regcache_sync_region() is much more useful to drivers if it's exported for use by modules. Who knew? - Make sure we don't divide by zero when doing debugfs dumps of rbtrees, not visible up until now because everything was providing at least some cache on startup. * tag 'regmap-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: prevent division by zero in rbtree_show regmap: Export regcache_sync_region() 07 April 2012, 16:56:00 UTC
a3fac08 Linus Torvalds 07 April 2012, 16:53:33 UTC Merge branch 'kvm-updates/3.4' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull a few KVM fixes from Avi Kivity: "A bunch of powerpc KVM fixes, a guest and a host RCU fix (unrelated), and a small build fix." * 'kvm-updates/3.4' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Resolve RCU vs. async page fault problem KVM: VMX: vmx_set_cr0 expects kvm->srcu locked KVM: PMU: Fix integer constant is too large warning in kvm_pmu_set_msr() KVM: PPC: Book3S: PR: Fix preemption KVM: PPC: Save/Restore CR over vcpu_run KVM: PPC: Book3S HV: Save and restore CR in __kvmppc_vcore_entry KVM: PPC: Book3S HV: Fix kvm_alloc_linear in case where no linears exist KVM: PPC: Book3S: Compile fix for ppc32 in HIOR access code 07 April 2012, 16:53:33 UTC
664481e Linus Torvalds 07 April 2012, 16:52:46 UTC Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: fix clock-sh7757 for the latest sh_mobile_sdhi driver serial: sh-sci: use serial_port_in/out vs sci_in/out. sh: vsyscall: Fix up .eh_frame generation. sh: dma: Fix up device attribute mismatch from sysdev fallout. sh: dwarf unwinder depends on SHcompact. sh: fix up fallout from system.h disintegration. 07 April 2012, 16:52:46 UTC
d6a624e Linus Torvalds 07 April 2012, 16:51:36 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security layer fixlet from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: sysctl: fix write access to dmesg_restrict/kptr_restrict 07 April 2012, 16:51:36 UTC
f21fec9 Linus Torvalds 07 April 2012, 02:56:04 UTC Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & Power Management patches from Len Brown: "Two fixes for cpuidle merge-window changes, plus a URL fix in MAINTAINERS" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: MAINTAINERS: Update git url for ACPI cpuidle: Fix panic in CPU off-lining with no idle driver ACPI processor: Use safe_halt() rather than halt() in acpi_idle_play_dead() 07 April 2012, 02:56:04 UTC
a0421da Linus Torvalds 07 April 2012, 02:54:26 UTC Merge branch '3.4-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull target fixes from Nicholas Bellinger: "Pull two tcm_fc fabric related fixes for -rc2: Note that both have been CC'ed to stable, and patch #1 is the important one that addresses a memory corruption bug related to FC exchange timeouts + command abort. Thanks again to MDR for tracking down this issue!" * '3.4-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: tcm_fc: Do not free tpg structure during wq allocation failure tcm_fc: Add abort flag for gracefully handling exchange timeout 07 April 2012, 02:54:26 UTC
06383f1 Mark Rustad 03 April 2012, 17:24:52 UTC tcm_fc: Do not free tpg structure during wq allocation failure Avoid freeing a registered tpg structure if an alloc_workqueue call fails. This fixes a bug where the failure was leaking memory associated with se_portal_group setup during the original core_tpg_register() call. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Acked-by: Kiran Patil <Kiran.patil@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 07 April 2012, 01:57:05 UTC
e1c4038 Mark Rustad 03 April 2012, 17:24:41 UTC tcm_fc: Add abort flag for gracefully handling exchange timeout Add abort flag and use it to terminate processing when an exchange is timed out or is reset. The abort flag is used in place of the transport_generic_free_cmd function call in the reset and timeout cases, because calling that function in that context would free memory that was in use. The aborted flag allows the lifetime to be managed in a more normal way, while truncating the processing. This change eliminates a source of memory corruption which manifested in a variety of ugly ways. (nab: Drop unused struct fc_exch *ep in ft_recv_seq) Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Acked-by: Kiran Patil <Kiran.patil@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 07 April 2012, 01:56:43 UTC
eeaab2d Len Brown 07 April 2012, 01:48:59 UTC Merge branches 'idle-fix' and 'misc' into release 07 April 2012, 01:48:59 UTC
aaef292 Igor Murzov 30 March 2012, 18:40:12 UTC MAINTAINERS: Update git url for ACPI Signed-off-by: Igor Murzov <e-mail@date.by> Signed-off-by: Len Brown <len.brown@intel.com> 07 April 2012, 01:41:43 UTC
4157368 Linus Torvalds 07 April 2012, 00:56:20 UTC Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile bug fixes from Chris Metcalf: "This includes Paul Gortmaker's change to fix the <asm/system.h> disintegration issues on tile, a fix to unbreak the tilepro ethernet driver, and a backlog of bugfix-only changes from internal Tilera development over the last few months. They have all been to LKML and on linux-next for the last few days. The EDAC change to MAINTAINERS is an oddity but discussion on the linux-edac list suggested I ask you to pull that change through my tree since they don't have a tree to pull edac changes from at the moment." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (39 commits) drivers/net/ethernet/tile: fix netdev_alloc_skb() bombing MAINTAINERS: update EDAC information tilepro ethernet driver: fix a few minor issues tile-srom.c driver: minor code cleanup edac: say "TILEGx" not "TILEPro" for the tilegx edac driver arch/tile: avoid accidentally unmasking NMI-type interrupt accidentally arch/tile: remove bogus performance optimization arch/tile: return SIGBUS for addresses that are unaligned AND invalid arch/tile: fix finv_buffer_remote() for tilegx arch/tile: use atomic exchange in arch_write_unlock() arch/tile: stop mentioning the "kvm" subdirectory arch/tile: export the page_home() function. arch/tile: fix pointer cast in cacheflush.c arch/tile: fix single-stepping over swint1 instructions on tilegx arch/tile: implement panic_smp_self_stop() arch/tile: add "nop" after "nap" to help GX idle power draw arch/tile: use proper memparse() for "maxmem" options arch/tile: fix up locking in pgtable.c slightly arch/tile: don't leak kernel memory when we unload modules arch/tile: fix bug in delay_backoff() ... 07 April 2012, 00:56:20 UTC
9479f0f Linus Torvalds 07 April 2012, 00:54:53 UTC Merge tag 'stable/for-linus-3.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen fixes from Konrad Rzeszutek Wilk: "Two fixes for regressions: * one is a workaround that will be removed in v3.5 with proper fix in the tip/x86 tree, * the other is to fix drivers to load on PV (a previous patch made them only load in PVonHVM mode). The rest are just minor fixes in the various drivers and some cleanup in the core code." * tag 'stable/for-linus-3.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pcifront: avoid pci_frontend_enable_msix() falsely returning success xen/pciback: fix XEN_PCI_OP_enable_msix result xen/smp: Remove unnecessary call to smp_processor_id() xen/x86: Workaround 'x86/ioapic: Add register level checks to detect bogus io-apic entries' xen: only check xen_platform_pci_unplug if hvm 07 April 2012, 00:54:53 UTC
1ddca05 Linus Torvalds 07 April 2012, 00:22:23 UTC Merge tag 'mmc-fixes-for-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC fixes from Chris Ball: - Disable use of MSI in sdhci-pci, which caused multiple chipsets to stop working in 3.4-rc1. I'll wait to turn this on again until we have a chipset whitelist for it. - Fix a libertas SDIO powered-resume regression introduced in 3.3; thanks to Neil Brown and Rafael Wysocki for this fix. - Fix module reloading on omap_hsmmc. - Stop trusting the spec/card's specified maximum data timeout length, and use three seconds instead. Previously we used 300ms. Also cleanups and fixes for s3c, atmel, sh_mmcif and omap_hsmmc. * tag 'mmc-fixes-for-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (28 commits) mmc: use really long write timeout to deal with crappy cards mmc: sdhci-dove: Fix compile error by including module.h mmc: Prevent 1.8V switch for SD hosts that don't support UHS modes. Revert "mmc: sdhci-pci: Add MSI support" Revert "mmc: sdhci-pci: add quirks for broken MSI on O2Micro controllers" mmc: core: fix power class selection mmc: omap_hsmmc: fix module re-insertion mmc: omap_hsmmc: convert to module_platform_driver mmc: omap_hsmmc: make it behave well as a module mmc: omap_hsmmc: trivial cleanups mmc: omap_hsmmc: context save after enabling runtime pm mmc: omap_hsmmc: use runtime put sync in probe error patch mmc: sdio: Use empty system suspend/resume callbacks at the bus level mmc: bus: print bus speed mode of UHS-I card mmc: sdhci-pci: add quirks for broken MSI on O2Micro controllers mmc: sh_mmcif: Simplify calculation of mmc->f_min mmc: sh_mmcif: mmc->f_max should be half of the bus clock mmc: sh_mmcif: double clock speed mmc: block: Remove use of mmc_blk_set_blksize mmc: atmel-mci: add support for odd clock dividers ... 07 April 2012, 00:22:23 UTC
f68e556 Linus Torvalds 06 April 2012, 20:54:56 UTC Make the "word-at-a-time" helper functions more commonly usable I have a new optimized x86 "strncpy_from_user()" that will use these same helper functions for all the same reasons the name lookup code uses them. This is preparation for that. This moves them into an architecture-specific header file. It's architecture-specific for two reasons: - some of the functions are likely to want architecture-specific implementations. Even if the current code happens to be "generic" in the sense that it should work on any little-endian machine, it's likely that the "multiply by a big constant and shift" implementation is less than optimal for an architecture that has a guaranteed fast bit count instruction, for example. - I expect that if architectures like sparc want to start playing around with this, we'll need to abstract out a few more details (in particular the actual unaligned accesses). So we're likely to have more architecture-specific stuff if non-x86 architectures start using this. (and if it turns out that non-x86 architectures don't start using this, then having it in an architecture-specific header is still the right thing to do, of course) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 April 2012, 20:54:56 UTC
ee01e66 Toshi Kani 01 April 2012, 03:37:02 UTC cpuidle: Fix panic in CPU off-lining with no idle driver Fix a NULL pointer dereference panic in cpuidle_play_dead() during CPU off-lining when no cpuidle driver is registered. A cpuidle driver may be registered at boot-time based on CPU type. This patch allows an off-lined CPU to enter HLT-based idle in this condition. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: Boris Ostrovsky <boris.ostrovsky@amd.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Tested-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Len Brown <len.brown@intel.com> 06 April 2012, 19:01:25 UTC
23f347e Linus Torvalds 06 April 2012, 17:37:38 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking updates from David Miller: 1) Fix inaccuracies in network driver interface documentation, from Ben Hutchings. 2) Fix handling of negative offsets in BPF JITs, from Jan Seiffert. 3) Compile warning, locking, and refcounting fixes in netfilter's xt_CT, from Pablo Neira Ayuso. 4) phonet sendmsg needs to validate user length just like any other datagram protocol, fix from Sasha Levin. 5) Ipv6 multicast code uses wrong loop index, from RongQing Li. 6) Link handling and firmware fixes in bnx2x driver from Yaniv Rosner and Yuval Mintz. 7) mlx4 erroneously allocates 4 pages at a time, regardless of page size, fix from Thadeu Lima de Souza Cascardo. 8) SCTP socket option wasn't extended in a backwards compatible way, fix from Thomas Graf. 9) Add missing address change event emissions to bonding, from Shlomo Pongratz. 10) /proc/net/dev regressed because it uses a private offset to track where we are in the hash table, but this doesn't track the offset pullback that the seq_file code does resulting in some entries being missed in large dumps. Fix from Eric Dumazet. 11) do_tcp_sendpage() unloads the send queue way too fast, because it invokes tcp_push() when it shouldn't. Let the natural sequence generated by the splice paths, and the assosciated MSG_MORE settings, guide the tcp_push() calls. Otherwise what goes out of TCP is spaghetti and doesn't batch effectively into GSO/TSO clusters. From Eric Dumazet. 12) Once we put a SKB into either the netlink receiver's queue or a socket error queue, it can be consumed and freed up, therefore we cannot touch it after queueing it like that. Fixes from Eric Dumazet. 13) PPP has this annoying behavior in that for every transmit call it immediately stops the TX queue, then calls down into the next layer to transmit the PPP frame. But if that next layer can take it immediately, it just un-stops the TX queue right before returning from the transmit method. Besides being useless work, it makes several facilities unusable, in particular things like the equalizers. Well behaved devices should only stop the TX queue when they really are full, and in PPP's case when it gets backlogged to the downstream device. David Woodhouse therefore fixed PPP to not stop the TX queue until it's downstream can't take data any more. 14) IFF_UNICAST_FLT got accidently lost in some recent stmmac driver changes, re-add. From Marc Kleine-Budde. 15) Fix link flaps in ixgbe, from Eric W. Multanen. 16) Descriptor writeback fixes in e1000e from Matthew Vick. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) net: fix a race in sock_queue_err_skb() netlink: fix races after skb queueing doc, net: Update ndo_start_xmit return type and values doc, net: Remove instruction to set net_device::trans_start doc, net: Update netdev operation names doc, net: Update documentation of synchronisation for TX multiqueue doc, net: Remove obsolete reference to dev->poll ethtool: Remove exception to the requirement of holding RTNL lock MAINTAINERS: update for Marvell Ethernet drivers bonding: properly unset current_arp_slave on slave link up phonet: Check input from user before allocating tcp: tcp_sendpages() should call tcp_push() once ipv6: fix array index in ip6_mc_add_src() mlx4: allocate just enough pages instead of always 4 pages stmmac: re-add IFF_UNICAST_FLT for dwmac1000 bnx2x: Clear MDC/MDIO warning message bnx2x: Fix BCM57711+BCM84823 link issue bnx2x: Clear BCM84833 LED after fan failure bnx2x: Fix BCM84833 PHY FW version presentation bnx2x: Fix link issue for BCM8727 boards. ... 06 April 2012, 17:37:38 UTC
f09d843 Jan Beulich 02 April 2012, 14:22:39 UTC xen/pcifront: avoid pci_frontend_enable_msix() falsely returning success The original XenoLinux code has always had things this way, and for compatibility reasons (in particular with a subsequent pciback adjustment) upstream Linux should behave the same way (allowing for two distinct error indications to be returned by the backend). Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 06 April 2012, 16:16:02 UTC
0ee46ec Jan Beulich 02 April 2012, 14:32:22 UTC xen/pciback: fix XEN_PCI_OP_enable_msix result Prior to 2.6.19 and as of 2.6.31, pci_enable_msix() can return a positive value to indicate the number of vectors (less than the amount requested) that can be set up for a given device. Returning this as an operation value (secondary result) is fine, but (primary) operation results are expected to be negative (error) or zero (success) according to the protocol. With the frontend fixed to match the XenoLinux behavior, the backend can now validly return zero (success) here, passing the upper limit on the number of vectors in op->value. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 06 April 2012, 16:13:55 UTC
e8c9e78 Srivatsa S. Bhat 22 March 2012, 12:59:24 UTC xen/smp: Remove unnecessary call to smp_processor_id() There is an extra and unnecessary call to smp_processor_id() in cpu_bringup(). Remove it. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 06 April 2012, 16:13:30 UTC
2531d64 Konrad Rzeszutek Wilk 20 March 2012, 19:04:18 UTC xen/x86: Workaround 'x86/ioapic: Add register level checks to detect bogus io-apic entries' The above mentioned patch checks the IOAPIC and if it contains -1, then it unmaps said IOAPIC. But under Xen we get this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 IP: [<ffffffff8134e51f>] xen_irq_init+0x1f/0xb0 PGD 0 Oops: 0002 [#1] SMP CPU 0 Modules linked in: Pid: 1, comm: swapper/0 Not tainted 3.2.10-3.fc16.x86_64 #1 Dell Inc. Inspiron 1525 /0U990C RIP: e030:[<ffffffff8134e51f>] [<ffffffff8134e51f>] xen_irq_init+0x1f/0xb0 RSP: e02b: ffff8800d42cbb70 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000ffffffef RCX: 0000000000000001 RDX: 0000000000000040 RSI: 00000000ffffffef RDI: 0000000000000001 RBP: ffff8800d42cbb80 R08: ffff8800d6400000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 00000000ffffffef R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000010 FS: 0000000000000000(0000) GS:ffff8800df5fe000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0:000000008005003b CR2: 0000000000000040 CR3: 0000000001a05000 CR4: 0000000000002660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper/0 (pid: 1, threadinfo ffff8800d42ca000, task ffff8800d42d0000) Stack: 00000000ffffffef 0000000000000010 ffff8800d42cbbe0 ffffffff8134f157 ffffffff8100a9b2 ffffffff8182ffd1 00000000000000a0 00000000829e7384 0000000000000002 0000000000000010 00000000ffffffff 0000000000000000 Call Trace: [<ffffffff8134f157>] xen_bind_pirq_gsi_to_irq+0x87/0x230 [<ffffffff8100a9b2>] ? check_events+0x12+0x20 [<ffffffff814bab42>] xen_register_pirq+0x82/0xe0 [<ffffffff814bac1a>] xen_register_gsi.part.2+0x4a/0xd0 [<ffffffff814bacc0>] acpi_register_gsi_xen+0x20/0x30 [<ffffffff8103036f>] acpi_register_gsi+0xf/0x20 [<ffffffff8131abdb>] acpi_pci_irq_enable+0x12e/0x202 [<ffffffff814bc849>] pcibios_enable_device+0x39/0x40 [<ffffffff812dc7ab>] do_pci_enable_device+0x4b/0x70 [<ffffffff812dc878>] __pci_enable_device_flags+0xa8/0xf0 [<ffffffff812dc8d3>] pci_enable_device+0x13/0x20 The reason we are dying is b/c the call acpi_get_override_irq() is used, which returns the polarity and trigger for the IRQs. That function calls mp_find_ioapics to get the 'struct ioapic' structure - which along with the mp_irq[x] is used to figure out the default values and the polarity/trigger overrides. Since the mp_find_ioapics now returns -1 [b/c the IOAPIC is filled with 0xffffffff], the acpi_get_override_irq() stops trying to lookup in the mp_irq[x] the proper INT_SRV_OVR and we can't install the SCI interrupt. The proper fix for this is going in v3.5 and adds an x86_io_apic_ops struct so that platforms can override it. But for v3.4 lets carry this work-around. This patch does that by providing a slightly different variant of the fake IOAPIC entries. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 06 April 2012, 16:13:06 UTC
e95ae5a Igor Mammedov 27 March 2012, 17:31:08 UTC xen: only check xen_platform_pci_unplug if hvm commit b9136d207f08 xen: initialize platform-pci even if xen_emul_unplug=never breaks blkfront/netfront by not loading them because of xen_platform_pci_unplug=0 and it is never set for PV guest. Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 06 April 2012, 16:12:52 UTC
110c433 Eric Dumazet 06 April 2012, 08:49:10 UTC net: fix a race in sock_queue_err_skb() As soon as an skb is queued into socket error queue, another thread can consume it, so we are not allowed to reference skb anymore, or risk use after free. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 April 2012, 09:07:21 UTC
4a7e7c2 Eric Dumazet 05 April 2012, 22:17:46 UTC netlink: fix races after skb queueing As soon as an skb is queued into socket receive_queue, another thread can consume it, so we are not allowed to reference skb anymore, or risk use after free. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 April 2012, 08:21:06 UTC
e34fac1 Ben Hutchings 05 April 2012, 14:40:25 UTC doc, net: Update ndo_start_xmit return type and values Commit dc1f8bf68b311b1537cb65893430b6796118498a ('netdev: change transmit to limited range type') changed the required return type and 9a1654ba0b50402a6bd03c7b0fe9b0200a5ea7b1 ('net: Optimize hard_start_xmit() return checking') changed the valid numerical return values. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 April 2012, 06:43:13 UTC
de7aca1 Ben Hutchings 05 April 2012, 14:40:06 UTC doc, net: Remove instruction to set net_device::trans_start Commit 08baf561083bc27a953aa087dd8a664bb2b88e8e ('net: txq_trans_update() helper') made it unnecessary for most drivers to set net_device::trans_start (or netdev_queue::trans_start). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 April 2012, 06:43:13 UTC
b3cf654 Ben Hutchings 05 April 2012, 14:39:47 UTC doc, net: Update netdev operation names Commits d314774cf2cd5dfeb39a00d37deee65d4c627927 ('netdev: network device operations infrastructure') and 008298231abbeb91bc7be9e8b078607b816d1a4a ('netdev: add more functions to netdevice ops') moved and renamed net device operation pointers. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 April 2012, 06:43:12 UTC
04fd3d3 Ben Hutchings 05 April 2012, 14:39:30 UTC doc, net: Update documentation of synchronisation for TX multiqueue Commits e308a5d806c852f56590ffdd3834d0df0cbed8d7 ('netdev: Add netdev->addr_list_lock protection.') and e8a0464cc950972824e2e128028ae3db666ec1ed ('netdev: Allocate multiple queues for TX.') introduced more fine-grained locks. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 April 2012, 06:43:12 UTC
93b6a3a Ben Hutchings 05 April 2012, 14:39:10 UTC doc, net: Remove obsolete reference to dev->poll Commit bea3348eef27e6044b6161fd04c3152215f96411 ('[NET]: Make NAPI polling independent of struct net_device objects.') removed the automatic disabling of NAPI polling by dev_close(), and drivers must now do this themselves. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 April 2012, 06:43:12 UTC
b4f79e5 Ben Hutchings 05 April 2012, 14:38:49 UTC ethtool: Remove exception to the requirement of holding RTNL lock Commit e52ac3398c3d772d372b9b62ab408fd5eec96840 ('net: Use device model to get driver name in skb_gso_segment()') removed the only in-tree caller of ethtool ops that doesn't hold the RTNL lock. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 April 2012, 06:43:12 UTC
314489b Linus Torvalds 06 April 2012, 05:13:39 UTC Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: SoC fixes: from Olof Johansson: "A bunch of fixes for regressions (and a few other problems) in 3.4-rc1: - Fix for regression of mach/io.h cleanup on platforms with PCI or PCMCIA (adding back the include file on those for now) - AT91 fixes for usb and spi - smsc911x ethernet fixes for i.MX - smsc911x fixes for OMAP - gpio fixes for Tegra - A handful of build error and warning fixes for various platforms - cpufreq kconfig dependencies, build and lowlevel debug fixes for Samsung platforms In other words, more or less the regular collection of -rc1/2 type material. A few of them, in particular the smsc911x for OMAP series, aren't technically regressions for 3.4, but they're valid fixes and we're still relatively early in the rc cycle so it seems appropriate to include them." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: fix __io macro for PCMCIA ARM: EXYNOS: Fix compiler warning in dma.c file ARM: EXYNOS: fix ISO C90 warning ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitions ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status ARM: OMAP2+: hwmod: Restore sysc after a reset ARM: OMAP2+: omap_hwmod: Allow io_ring wakeup configuration for all modules ARM: OMAP3: clock data: fill in some missing clockdomains ARM: OMAP4: clock data: Force a DPLL clkdm/pwrdm ON before a relock ARM: OMAP4: clock data: fix mult and div mask for USB_DPLL ARM: OMAP2+: powerdomain: Wait for powerdomain transition in pwrdm_state_switch() gpio: tegra: Iterate over the correct number of banks gpio: tegra: fix register address calculations for Tegra30 EXYNOS: fix dependency for EXYNOS_CPUFREQ ARM: at91: dt: remove unit-address part for memory nodes ARM: at91: fix check of valid GPIO for SPI and USB USB: ehci-atmel: add needed of.h header file ARM: at91/NAND DT bindings: add comments ARM: at91/at91sam9x5.dtsi: fix NAND ale/cle in DT file USB: ohci-at91: trivial return code name change ... 06 April 2012, 05:13:39 UTC
43e347a Linus Torvalds 06 April 2012, 04:38:51 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin Pull a few blackfin compile fixes from Bob Liu. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: blackfin: update defconfig for bf527-ezkit blackfin: gpio: fix compile error if !CONFIG_GPIOLIB blackfin: fix L1 data A overflow link issue 06 April 2012, 04:38:51 UTC
35fe2e7 Bob Liu 05 April 2012, 02:40:35 UTC blackfin: update defconfig for bf527-ezkit To fix compile error: drivers/usb/musb/blackfin.h:51:3: error: #error "Please use PIO mode in MUSB driver on bf52x chip v0.0 and v0.1" make[4]: *** [drivers/usb/musb/blackfin.o] Error 1 Signed-off-by: Bob Liu <lliubbo@gmail.com> 06 April 2012, 02:25:03 UTC
e8c5c6d Bob Liu 27 March 2012, 03:27:15 UTC blackfin: gpio: fix compile error if !CONFIG_GPIOLIB Add __gpio_get_value()/__gpio_set_value() to fix compile error if CONFIG_GPIOLIB = n. Signed-off-by: Bob Liu <lliubbo@gmail.com> 06 April 2012, 02:25:03 UTC
95fc2d8 Mike Frysinger 28 March 2012, 03:43:02 UTC blackfin: fix L1 data A overflow link issue This patch fix below compile error: "bfin-uclinux-ld: L1 data A overflow!" It is due to the recent lib/gen_crc32table.c change: 46c5801eaf86e83cb3a4142ad35188db5011fff0 crc32: bolt on crc32c it added 8KiB more data to __cacheline_aligned which cause blackfin L1 data cache overflow. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bob Liu <lliubbo@gmail.com> 06 April 2012, 02:25:02 UTC
fb9d78a Linus Torvalds 06 April 2012, 00:34:30 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm Pull an APM fix from Jiri Kosina: "One deadlock/race fix from Niel that got introduced when we were moving away from freezer_*_count() to wait_event_freezable()." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm: APM: fix deadlock in APM_IOC_SUSPEND ioctl 06 April 2012, 00:34:30 UTC
3bdc9ba Paul Walmsley 12 March 2012, 10:58:00 UTC mmc: use really long write timeout to deal with crappy cards Several people have noticed that crappy SD cards take much longer to complete multiple block writes than the 300ms that Linux specifies. Try to work around this by using a three second write timeout instead. This is a generalized version of a patch from Chase Maupin <Chase.Maupin@ti.com>, whose patch description said: * With certain SD cards timeouts like the following have been seen due to an improper calculation of the dto value: mmcblk0: error -110 transferring data, sector 4126233, nr 8, card status 0xc00 * By removing the dto calculation and setting the timeout value to the maximum specified by the SD card specification part A2 section 2.2.15 these timeouts can be avoided. * This change has been used by beagleboard users as well as the Texas Instruments SDK without a negative impact. * There are multiple discussion threads about this but the most relevant ones are: * http://talk.maemo.org/showthread.php?p=1000707#post1000707 * http://www.mail-archive.com/linux-omap@vger.kernel.org/msg42213.html * Original proposal for this fix was done by Sukumar Ghoral of Texas Instruments * Tested using a Texas Instruments AM335x EVM Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:34 UTC
8c2fc8e Alf Høgemark 04 April 2012, 16:27:09 UTC mmc: sdhci-dove: Fix compile error by including module.h This patch fixes a compile error in drivers/mmc/host/sdhci-dove.c by including the linux/module.h file. Signed-off-by: Alf Høgemark <alf@i100.no> Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:33 UTC
4188bba Al Cooper 16 March 2012, 19:54:17 UTC mmc: Prevent 1.8V switch for SD hosts that don't support UHS modes. The driver should not try to switch to 1.8V when the SD 3.0 host controller does not have any UHS capabilities bits set (SDR50, DDR50 or SDR104). See page 72 of "SD Specifications Part A2 SD Host Controller Simplified Specification Version 3.00" under "1.8V Signaling Enable". Instead of setting SDR12 and SDR25 in the host capabilities data structure for all V3.0 host controllers, only set them if SDR104, SDR50 or DDR50 is set in the host capabilities register. This will prevent the switch to 1.8V later. Signed-off-by: Al Cooper <acooper@gmail.com> Acked-by: Arindam Nath <arindam.nath@amd.com> Acked-by: Philip Rakity <prakity@marvell.com> Acked-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:32 UTC
79263f3 Chris Ball 03 April 2012, 20:48:32 UTC Revert "mmc: sdhci-pci: Add MSI support" This reverts commit e6039832bed9a9b967796d7021f17f25b625b616. There are reports of MSI breaking SDHCI on multiple chipsets (JMicron and O2Micro, at least), so this should be reverted until we come up with a whitelist or something. Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:32 UTC
84e41d2 Chris Ball 03 April 2012, 20:47:55 UTC Revert "mmc: sdhci-pci: add quirks for broken MSI on O2Micro controllers" This reverts commit c16e981b2fd9455af670a69a84f4c8cf07e12658, because it's no longer useful once MSI support is reverted. Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:31 UTC
93fc5a4 Subhash Jadavani 03 April 2012, 06:55:58 UTC mmc: core: fix power class selection mmc_select_powerclass() function returns error if eMMC VDD level supported by host is between 2.7v to 3.2v. According to eMMC specification, valid voltage for high voltage cards is 2.7v to 3.6v. This patch ensures that 2.7v to 3.6v VDD range is treated as valid range. Also, failure to set the power class shouldn't be treated as fatal error because even if setting the power class fails, card can still work in default power class. If mmc_select_powerclass() returns error, just print the warning message and go ahead with rest of the card initialization. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Girish K S <girish.shivananjappa@linaro.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:31 UTC
fc307df Balaji T K 02 April 2012, 06:56:47 UTC mmc: omap_hsmmc: fix module re-insertion OMAP4 and OMAP3 HSMMC IP registers differ by 0x100 offset. Adding the offset to platform_device resource structure increments the start address for every insmod operation. MMC command fails on re-insertion as module due to incorrect register base. Fix this by updating the ioremap base address only. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:30 UTC
b796450 Felipe Balbi 14 March 2012, 09:18:32 UTC mmc: omap_hsmmc: convert to module_platform_driver This will delete some boilerplate code, no functional changes. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:29 UTC
efa25fd Felipe Balbi 14 March 2012, 09:18:28 UTC mmc: omap_hsmmc: make it behave well as a module If we put probe() on __init section, that will never work for multiple module insertions/removals. In order to make it work properly, move probe to __devinit section and use platform_driver_register() instead of platform_driver_probe(). Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:29 UTC
927ce94 Felipe Balbi 14 March 2012, 09:18:27 UTC mmc: omap_hsmmc: trivial cleanups A bunch of non-functional cleanups to the omap_hsmmc driver. It basically decreases indentation level, drop unneded dereferences and drop unneded accesses to the platform_device structure. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:28 UTC
92a3aeb Balaji T K 24 February 2012, 15:44:34 UTC mmc: omap_hsmmc: context save after enabling runtime pm Call context save api after enabling runtime pm to make sure that register access in context save api happens with clk enabled. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:27 UTC
d59d77e Balaji T K 24 February 2012, 15:44:33 UTC mmc: omap_hsmmc: use runtime put sync in probe error patch pm_runtime_put_sync instead of autosuspend pm runtime API because iounmap(host->base) follows immediately. Reported-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:27 UTC
e841a7c Rafael J. Wysocki 01 April 2012, 04:34:58 UTC mmc: sdio: Use empty system suspend/resume callbacks at the bus level Neil Brown reports that commit 35cd133c PM: Run the driver callback directly if the subsystem one is not there breaks suspend for his libertas wifi, because SDIO has a protocol where the suspend method can return -ENOSYS and this means "There is no point in suspending, just turn me off". Moreover, the suspend methods provided by SDIO drivers are not supposed to be called by the PM core or bus-level suspend routines (which aren't presend for SDIO). Instead, when the SDIO core gets to suspend the device's ancestor, it calls the device driver's suspend function, catches the ENOSYS, and turns the device off. The commit above breaks the SDIO core's assumption that the device drivers' callbacks won't be executed if it doesn't provide any bus-level callbacks. If fact, however, this assumption has never been really satisfied, because device class or device type suspend might very well use the driver's callback even without that commit. The simplest way to address this problem is to make the SDIO core tell the PM core to ignore driver callbacks, for example by providing no-operation suspend/resume callbacks at the bus level for it, which is implemented by this change. Reported-and-tested-by: Neil Brown <neilb@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> [stable: please apply to 3.3-stable only] Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:26 UTC
6500c8e Subhash Jadavani 30 March 2012, 06:40:18 UTC mmc: bus: print bus speed mode of UHS-I card When UHS-I card is detected also print the bus speed mode in which UHS-I card will be running. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:26 UTC
210b7d2 Manuel Lauss 29 March 2012, 17:05:04 UTC mmc: sdhci-pci: add quirks for broken MSI on O2Micro controllers MSI on my O2Micro OZ600 SD card reader is broken. This patch adds a quirk to disable MSI on these controllers. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:25 UTC
eb91b91 Simon Horman 28 March 2012, 09:01:11 UTC mmc: sh_mmcif: Simplify calculation of mmc->f_min There is no need to tune mmc->f_min to a value near 400kHz as the MMC core begins testing frequencies at 400kHz regardless of the value of mmc->f_min. As suggested by Guennadi Liakhovetski. Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Cao Minh Hiep <hiepcm@gmail.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:24 UTC
930f152 Simon Horman 28 March 2012, 09:01:10 UTC mmc: sh_mmcif: mmc->f_max should be half of the bus clock mmc->f_max should be half of the bus clock. And now that mmc->f_max is not equal to the bus clock the latter should be used directly to calculate mmc->f_min. Cc: Magnus Damm <magnus.damm@gmail.com> Tested-by: Cao Minh Hiep <hiepcm@gmail.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:24 UTC
f938825 Simon Horman 28 March 2012, 09:01:09 UTC mmc: sh_mmcif: double clock speed Correct an off-by one error when calculating the clock divisor in cases where the host clock is a power of two of the target clock. Previously the divisor was one greater than the correct value in these cases leading to the clock being set at half the desired speed. Thanks to Guennadi Liakhovetski for working with me on the logic for this change. Tested-by: Cao Minh Hiep <hiepcm@gmail.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:23 UTC
5865f28 Ulf Hansson 22 March 2012, 10:47:26 UTC mmc: block: Remove use of mmc_blk_set_blksize According to the specifications for SD and (e)MMC default blocksize (named BLOCKLEN in Spec.) must always be 512 bytes. Since we hardcoded to always use 512 bytes, we do not explicitly have to set it. Future improvements should potentially make it possible to use a greater blocksize than 512 bytes, but until then let's skip this. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Reviewed-by: Subhash Jadavani <subhashj@codeauora.org> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:22 UTC
faf8180 Ludovic Desroches 21 March 2012, 15:41:23 UTC mmc: atmel-mci: add support for odd clock dividers Add an odd clock divider capability available from v5xx. It also involves changing the clock divider calculation, and changing the switch-case statement to use top-down fallthrough. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:22 UTC
33ab4bb Ludovic Desroches 21 March 2012, 15:41:22 UTC mmc: atmel-mci: r/w proof capability only available since v2xx Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:21 UTC
66292ad Ludovic Desroches 28 March 2012, 10:28:33 UTC mmc: atmel-mci: correct data timeout computation The HSMCI operates at a rate of up to Master Clock divided by two. Moreover previous calculation can cause overflows and so wrong timeouts. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:21 UTC
9f4e815 Mark Brown 01 April 2012, 03:31:55 UTC mmc: sdhci-s3c: Enable runtime power management Since most of the work is already done by the core we just need to add runtime suspend methods and tell the PM core that runtime PM is enabled for this device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:20 UTC
d5e9c02 Mark Brown 03 March 2012, 00:46:41 UTC mmc: sdhci-s3c: Use CONFIG_PM_SLEEP to ifdef system suspend This matches current best practice as one can have runtime PM enabled without system sleep and CONFIG_PM is defined for both. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:19 UTC
9bda6da Julia Lawall 09 March 2012, 04:24:53 UTC mmc: sdhci-s3c: use devm_ functions The various devm_ functions allocate memory that is released when a driver detaches. This patch uses these functions for data that is allocated in the probe function of a platform device and is only freed in the remove function. By using devm_ioremap, it also removes a potential memory leak, because there was no call to iounmap in the probe function. The call to platform_get_resource was moved just to make it closer to the place where its result it used. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Chris Ball <cjb@laptop.org> 06 April 2012, 00:32:16 UTC
a8f5b6e Olof Johansson 06 April 2012, 00:09:45 UTC Merge tag 'omap-fixes-a2-for-3.4rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes From Paul Walmsley: OMAP clock, powerdomain, clockdomain, and hwmod fixes intended for the early v3.4-rc series. Also contains an HSMMC integration refinement of an earlier hardware bug workaround. * tag 'omap-fixes-a2-for-3.4rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending: ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitions ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status ARM: OMAP2+: hwmod: Restore sysc after a reset ARM: OMAP2+: omap_hwmod: Allow io_ring wakeup configuration for all modules ARM: OMAP3: clock data: fill in some missing clockdomains ARM: OMAP4: clock data: Force a DPLL clkdm/pwrdm ON before a relock ARM: OMAP4: clock data: fix mult and div mask for USB_DPLL ARM: OMAP2+: powerdomain: Wait for powerdomain transition in pwrdm_state_switch() ARM: OMAP AM3517/3505: clock data: change EMAC clocks aliases ARM: OMAP: clock: fix race in disable all clocks ARM: OMAP4: hwmod data: Add aliases for McBSP fclk clocks ARM: OMAP3xxx: clock data: fix DPLL4 CLKSEL masks ARM: OMAP3xxx: HSMMC: avoid erratum workaround when transceiver is attached ARM: OMAP44xx: clockdomain data: correct the emu_sys_clkdm CLKTRCTRL data 06 April 2012, 00:09:45 UTC
1d4dc33 Thomas Abraham 16 February 2012, 13:23:59 UTC mmc: sdhci-s3c: Keep a copy of platform data and use it The platform data is copied into driver's private data and the copy is used for all access to the platform data. This simpifies the addition of device tree support for the sdhci-s3c driver. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org> 05 April 2012, 23:58:01 UTC
0d22c77 Thomas Abraham 01 April 2012, 03:29:45 UTC mmc: sdhci-s3c: derive transfer width host cap from max_width in platdata max_width member in platform data can be used to derive the mmc bus transfer width that can be supported by the controller. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org> 05 April 2012, 23:57:58 UTC
3119936 Thomas Abraham 16 February 2012, 13:23:58 UTC mmc: sdhci-s3c: Remove usage of clk_type member in platform data SDHCI controllers on Exynos4 do not include the sdclk divider as per the sdhci controller specification. This case can be represented using the sdhci quirk SDHCI_QUIRK_NONSTANDARD_CLOCK instead of using an additional enum type definition 'clk_types'. Hence, usage of clk_type member in platform data is removed and the sdhci quirk is used. In addition to that, since this qurik is SoC specific, driver data is introduced to represent controllers on SoC's that require this quirk. Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jeongbae Seo <jeongbae.seo@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org> 05 April 2012, 23:57:49 UTC
44c14c1 stephen hemminger 02 April 2012, 12:59:47 UTC MAINTAINERS: update for Marvell Ethernet drivers Marvell has agreed to do maintenance on the sky2 driver. * Add the developer to the maintainers file * Remove the old reference to the long gone (sk98lin) driver * Rearrange to fit current topic organization Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 April 2012, 23:09:04 UTC
5a43097 Veaceslav Falico 05 April 2012, 03:47:43 UTC bonding: properly unset current_arp_slave on slave link up When a slave comes up, we're unsetting the current_arp_slave without removing active flags from it, which can lead to situations where we have more than one slave with active flags in active-backup mode. To avoid this situation we must remove the active flags from a slave before removing it as a current_arp_slave. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 April 2012, 23:07:59 UTC
bcf1b70 Sasha Levin 05 April 2012, 12:07:45 UTC phonet: Check input from user before allocating A phonet packet is limited to USHRT_MAX bytes, this is never checked during tx which means that the user can specify any size he wishes, and the kernel will attempt to allocate that size. In the good case, it'll lead to the following warning, but it may also cause the kernel to kick in the OOM and kill a random task on the server. [ 8921.744094] WARNING: at mm/page_alloc.c:2255 __alloc_pages_slowpath+0x65/0x730() [ 8921.749770] Pid: 5081, comm: trinity Tainted: G W 3.4.0-rc1-next-20120402-sasha #46 [ 8921.756672] Call Trace: [ 8921.758185] [<ffffffff810b2ba7>] warn_slowpath_common+0x87/0xb0 [ 8921.762868] [<ffffffff810b2be5>] warn_slowpath_null+0x15/0x20 [ 8921.765399] [<ffffffff8117eae5>] __alloc_pages_slowpath+0x65/0x730 [ 8921.769226] [<ffffffff81179c8a>] ? zone_watermark_ok+0x1a/0x20 [ 8921.771686] [<ffffffff8117d045>] ? get_page_from_freelist+0x625/0x660 [ 8921.773919] [<ffffffff8117f3a8>] __alloc_pages_nodemask+0x1f8/0x240 [ 8921.776248] [<ffffffff811c03e0>] kmalloc_large_node+0x70/0xc0 [ 8921.778294] [<ffffffff811c4bd4>] __kmalloc_node_track_caller+0x34/0x1c0 [ 8921.780847] [<ffffffff821b0e3c>] ? sock_alloc_send_pskb+0xbc/0x260 [ 8921.783179] [<ffffffff821b3c65>] __alloc_skb+0x75/0x170 [ 8921.784971] [<ffffffff821b0e3c>] sock_alloc_send_pskb+0xbc/0x260 [ 8921.787111] [<ffffffff821b002e>] ? release_sock+0x7e/0x90 [ 8921.788973] [<ffffffff821b0ff0>] sock_alloc_send_skb+0x10/0x20 [ 8921.791052] [<ffffffff824cfc20>] pep_sendmsg+0x60/0x380 [ 8921.792931] [<ffffffff824cb4a6>] ? pn_socket_bind+0x156/0x180 [ 8921.794917] [<ffffffff824cb50f>] ? pn_socket_autobind+0x3f/0x90 [ 8921.797053] [<ffffffff824cb63f>] pn_socket_sendmsg+0x4f/0x70 [ 8921.798992] [<ffffffff821ab8e7>] sock_aio_write+0x187/0x1b0 [ 8921.801395] [<ffffffff810e325e>] ? sub_preempt_count+0xae/0xf0 [ 8921.803501] [<ffffffff8111842c>] ? __lock_acquire+0x42c/0x4b0 [ 8921.805505] [<ffffffff821ab760>] ? __sock_recv_ts_and_drops+0x140/0x140 [ 8921.807860] [<ffffffff811e07cc>] do_sync_readv_writev+0xbc/0x110 [ 8921.809986] [<ffffffff811958e7>] ? might_fault+0x97/0xa0 [ 8921.811998] [<ffffffff817bd99e>] ? security_file_permission+0x1e/0x90 [ 8921.814595] [<ffffffff811e17e2>] do_readv_writev+0xe2/0x1e0 [ 8921.816702] [<ffffffff810b8dac>] ? do_setitimer+0x1ac/0x200 [ 8921.818819] [<ffffffff810e2ec1>] ? get_parent_ip+0x11/0x50 [ 8921.820863] [<ffffffff810e325e>] ? sub_preempt_count+0xae/0xf0 [ 8921.823318] [<ffffffff811e1926>] vfs_writev+0x46/0x60 [ 8921.825219] [<ffffffff811e1a3f>] sys_writev+0x4f/0xb0 [ 8921.827127] [<ffffffff82658039>] system_call_fastpath+0x16/0x1b [ 8921.829384] ---[ end trace dffe390f30db9eb7 ]--- Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 April 2012, 23:05:56 UTC
35f9c09 Eric Dumazet 05 April 2012, 03:05:35 UTC tcp: tcp_sendpages() should call tcp_push() once commit 2f533844242 (tcp: allow splice() to build full TSO packets) added a regression for splice() calls using SPLICE_F_MORE. We need to call tcp_flush() at the end of the last page processed in tcp_sendpages(), or else transmits can be deferred and future sends stall. Add a new internal flag, MSG_SENDPAGE_NOTLAST, acting like MSG_MORE, but with different semantic. For all sendpage() providers, its a transparent change. Only sock_sendpage() and tcp_sendpages() can differentiate the two different flags provided by pipe_to_sendpage() Reported-by: Tom Herbert <therbert@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Eric Dumazet <eric.dumazet@gmail>com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 April 2012, 23:04:27 UTC
5d32c88 Linus Torvalds 05 April 2012, 22:30:34 UTC Merge branch 'akpm' (Andrew's patch-bomb) Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA 05 April 2012, 22:30:34 UTC
dac23b0 Michal Hocko 05 April 2012, 21:25:16 UTC memcg swap: use mem_cgroup_uncharge_swap fix Although mem_cgroup_uncharge_swap has an empty placeholder for !CONFIG_CGROUP_MEM_RES_CTLR_SWAP the definition is placed in the CONFIG_SWAP ifdef block so we are missing the same definition for !CONFIG_SWAP which implies !CONFIG_CGROUP_MEM_RES_CTLR_SWAP. This has not been an issue before, because mem_cgroup_uncharge_swap was not called from !CONFIG_SWAP context. But Hugh Dickins has a cleanup patch to call __mem_cgroup_commit_charge_swapin which is defined also for !CONFIG_SWAP. Let's move both the empty definition and declaration outside of the CONFIG_SWAP block to avoid the following compilation error: mm/memcontrol.c: In function '__mem_cgroup_commit_charge_swapin': mm/memcontrol.c:2837: error: implicit declaration of function 'mem_cgroup_uncharge_swap' if CONFIG_SWAP is disabled. Reported-by: David Rientjes <rientjes@google.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 April 2012, 22:25:51 UTC
6ede3d8 Ashish Jangam 05 April 2012, 21:25:15 UTC backlight: add driver for DA9052/53 PMIC v1 DA9052/53 PMIC has capability to supply power for upto 3 banks of 6 white serial LEDS. It can also control intensity of independent banks and to drive these banks boost converter will provide up to 24V and forward current of max 50mA. This patch allows to control intensity of the individual WLEDs bank through DA9052/53 PMIC. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 April 2012, 22:25:51 UTC
6e61ee3 Matt Fleming 05 April 2012, 21:25:14 UTC C6X: use set_current_blocked() and block_sigmask() As described in e6fa16ab9c1e ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0f28f ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 April 2012, 22:25:51 UTC
389325b Christopher Li 05 April 2012, 21:25:14 UTC MAINTAINERS: add entry for sparse checker Signed-off-by: Christopher Li <sparse@chrisli.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 April 2012, 22:25:51 UTC
6fc2648 Joe Perches 05 April 2012, 21:25:13 UTC MAINTAINERS: fix REMOTEPROC F: typo remoteproc.txt should have been .h Signed-off-by: Joe Perches <joe@perches.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 April 2012, 22:25:51 UTC
2561b06 Matt Fleming 05 April 2012, 21:25:12 UTC alpha: use set_current_blocked() and block_sigmask() As described in e6fa16ab9c1e ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check for shared signals we're about to block. Also, use the new helper function introduced in commit 5e6292c0f28f ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 April 2012, 22:25:51 UTC
234e340 Stephen Boyd 05 April 2012, 21:25:11 UTC simple_open: automatically convert to simple_open() Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 April 2012, 22:25:50 UTC
9b3ae64 Julia Lawall 05 April 2012, 21:25:10 UTC scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() Find instances of an open-coded simple_open() and replace them with calls to simple_open(). Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 April 2012, 22:25:50 UTC
20955e8 Stephen Boyd 05 April 2012, 21:25:09 UTC libfs: add simple_open() debugfs and a few other drivers use an open-coded version of simple_open() to pass a pointer from the file to the read/write file ops. Add support for this simple case to libfs so that we can remove the many duplicate copies of this simple function. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 April 2012, 22:25:50 UTC
7563ec4 Hillf Danton 05 April 2012, 21:25:09 UTC hugetlbfs: remove unregister_filesystem() when initializing module It was introduced by d1d5e05ffdc1 ("hugetlbfs: return error code when initializing module") but as Al pointed out, is a bad idea. Quoted comments from Al: "Note that unregister_filesystem() in module init is *always* wrong; it's not an issue here (it's done too early to care about and realistically the box is not going anywhere - it'll panic when attempt to exec /sbin/init fails, if not earlier), but it's a damn bad example. Consider a normal fs module. Somebody loads it and in parallel with that we get a mount attempt on that fs type. It comes between register and failure exits that causes unregister; at that point we are screwed since grabbing a reference to module as done by mount is enough to prevent exit, but not to prevent the failure of init. As the result, module will get freed when init fails, mounted fs of that type be damned." So remove it. Signed-off-by: Hillf Danton <dhillf@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 April 2012, 22:25:50 UTC
fd835d1 Jett.Zhou 05 April 2012, 21:25:08 UTC drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback According to 88pm860x spec, rtc alarm irq enable control is bit3 for RTC_ALARM_EN, so fix it. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Cc: Axel Lin <axel.lin@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 April 2012, 22:25:50 UTC
44c8249 Andrew Morton 05 April 2012, 21:25:07 UTC fs/xattr.c:setxattr(): improve handling of allocation failures This allocation can be as large as 64k. - Add __GFP_NOWARN so the a falied kmalloc() is silent - Fall back to vmalloc() if the kmalloc() failed Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: David Rientjes <rientjes@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 April 2012, 22:25:50 UTC
0d08d7b Andrew Morton 05 April 2012, 21:25:07 UTC fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed This allocation can be as large as 64k. As David points out, "falling back to vmalloc here is much better solution than failing to retreive the attribute - it will work no matter how fragmented memory gets. That means we don't get incomplete backups occurring after days or months of uptime and successful backups". Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: David Rientjes <rientjes@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 April 2012, 22:25:50 UTC
703bf2d Dave Jones 05 April 2012, 21:25:06 UTC fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() This size is user controllable, up to a maximum of XATTR_LIST_MAX (64k). So it's trivial for someone to trigger a stream of order:4 page allocation errors. Signed-off-by: Dave Jones <davej@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 April 2012, 22:25:50 UTC
back to top