Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
7b02ecb Christoph Hellwig 18 July 2009, 22:15:00 UTC xfs: switch to NOFS allocation under i_lock in xfs_readlink_bmap xfs_readlink_bmap is called with i_lock held, but i_lock is taken in reclaim context so all allocations under it must avoid recursions into the filesystem. Reported by the new reclaim context tracing in lockdep. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: Felix Blyakher <felixb@sgi.com> 12 August 2009, 06:07:53 UTC
10746e4 Christoph Hellwig 18 July 2009, 22:14:59 UTC xfs: switch to NOFS allocation under i_lock in xfs_attr_rmtval_set xfs_attr_rmtval_set is always called with i_lock held, and i_lock is taken in reclaim context so all allocations under it must avoid recursions into the filesystem. Reported by the new reclaim context tracing in lockdep. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: Felix Blyakher <felixb@sgi.com> 12 August 2009, 06:07:44 UTC
36fae17 Christoph Hellwig 18 July 2009, 22:14:58 UTC xfs: switch to NOFS allocation under i_lock in xfs_buf_associate_memory xfs_buf_associate_memory is used for setting up the spare buffer for the log wrap case in xlog_sync which can happen under i_lock when called from xfs_fsync. The i_lock mutex is taken in reclaim context so all allocations under it must avoid recursions into the filesystem. There are a couple more uses of xfs_buf_associate_memory in the log recovery code that are also affected by this, but I'd rather keep the code simple than passing on a gfp_mask argument. Longer term we should just stop requiring the memoery allocation in xlog_sync by some smaller rework of the buffer layer. Reported by the new reclaim context tracing in lockdep. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: Felix Blyakher <felixb@sgi.com> 12 August 2009, 06:07:38 UTC
3f52c2f Christoph Hellwig 18 July 2009, 22:14:57 UTC xfs: switch to NOFS allocation under i_lock in xfs_dir_cilookup_result xfs_dir_cilookup_result is always called with i_lock held, but i_lock is taken in reclaim context so all allocations under it must avoid recursions into the filesystem. Reported by the new reclaim context tracing in lockdep. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: Felix Blyakher <felixb@sgi.com> 12 August 2009, 06:07:23 UTC
73195ed Christoph Hellwig 18 July 2009, 22:14:56 UTC xfs: switch to NOFS allocation under i_lock in xfs_da_buf_make i_lock is taken in the reclaim context so all allocations under it must avoid recursions into the filesystem. Reported by the new reclaim context tracing in lockdep. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: Felix Blyakher <felixb@sgi.com> 12 August 2009, 06:07:14 UTC
f41d7fb Christoph Hellwig 18 July 2009, 22:14:55 UTC xfs: switch to NOFS allocation under i_lock in xfs_da_state_alloc xfs_da_state_alloc is always called with i_lock held, but i_lock is taken in reclaim context so all allocations under it must avoid recursions into the filesystem. Reported by the new reclaim context tracing in lockdep. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: Felix Blyakher <felixb@sgi.com> 12 August 2009, 06:07:07 UTC
ca35dcd Christoph Hellwig 18 July 2009, 22:14:54 UTC xfs: switch to NOFS allocation under i_lock in xfs_getbmap xfs_getbmap allocates memory with i_lock held, but i_lock is taken in reclaim context so all allocations under it must avoid recursions into the filesystem. Reported by the new reclaim context tracing in lockdep. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: Felix Blyakher <felixb@sgi.com> 12 August 2009, 06:06:59 UTC
0cc6eee Christoph Hellwig 18 July 2009, 22:14:53 UTC xfs: avoid memory allocation under m_peraglock in growfs code Allocate the memory for the larger m_perag array before taking the per-AG lock as the per-AG lock can be taken under the i_lock which can be taken from reclaim context. Reported by the new reclaim context tracing in lockdep. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: Felix Blyakher <felixb@sgi.com> 12 August 2009, 06:06:51 UTC
c8a4051 Eric Sandeen 31 July 2009, 05:02:17 UTC xfs: bump up nr_to_write in xfs_vm_writepage VM calculation for nr_to_write seems off. Bump it way up, this gets simple streaming writes zippy again. To be reviewed again after Jens' writeback changes. Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Cc: Chris Mason <chris.mason@oracle.com> Reviewed-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: Felix Blyakher <felixb@sgi.com> 31 July 2009, 05:57:11 UTC
97db39a Eric Sandeen 27 July 2009, 02:52:01 UTC xfs: reduce bmv_count in xfs_vn_fiemap commit 6321e3ed2acf3ee9643cdd403e1c88605d7944ba caused the full bmv_count's worth of getbmapx structures to get allocated; telling it to do MAXEXTNUM was a bit insane, resulting in ENOMEM every time. Chop it down to something reasonable, the number of slots in the caller's input buffer. If this is too large the caller may get ENOMEM but the reason should not be a mystery, and they can try again with something smaller. We add 1 to the value because in the normal getbmap world, bmv_count includes the header and xfs_getbmap does: nex = bmv->bmv_count - 1; if (nex <= 0) return XFS_ERROR(EINVAL); Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Reviewed-by: Olaf Weber <olaf@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Felix Blyakher <felixb@sgi.com> 31 July 2009, 05:56:58 UTC
fd40261 Felix Blyakher 13 June 2009, 02:28:59 UTC Merge branch 'master' of git://oss.sgi.com/xfs/xfs into for-linus 13 June 2009, 02:28:59 UTC
e83f1eb Christoph Hellwig 12 June 2009, 15:19:11 UTC xfs: fix small mismerge in xfs_vn_mknod Identation got messed up when merging the current_umask changes with the generic ACL support. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: Felix Blyakher <felixb@sgi.com> 13 June 2009, 02:15:31 UTC
493b87e Christoph Hellwig 12 June 2009, 15:34:55 UTC xfs: fix warnings with CONFIG_XFS_QUOTA disabled Fix warnings about unitialized dquot variables by making sure xfs_qm_vop_dqalloc touches it even when quotas are disabled. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: Felix Blyakher <felixb@sgi.com> 13 June 2009, 02:15:12 UTC
f3ad116 Linus Torvalds 13 June 2009, 01:21:19 UTC Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/configfs * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/configfs: configfs: Rework configfs_depend_item() locking and make lockdep happy configfs: Silence lockdep on mkdir() and rmdir() 13 June 2009, 01:21:19 UTC
d645727 Linus Torvalds 13 June 2009, 01:18:05 UTC Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6 * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (30 commits) [S390] wire up sys_perf_counter_open [S390] wire up sys_rt_tgsigqueueinfo [S390] ftrace: add system call tracer support [S390] ftrace: add function graph tracer support [S390] ftrace: add function trace mcount test support [S390] ftrace: add dynamic ftrace support [S390] kprobes: use probe_kernel_write [S390] maccess: arch specific probe_kernel_write() implementation [S390] maccess: add weak attribute to probe_kernel_write [S390] profile_tick called twice [S390] dasd: forward internal errors to dasd_sleep_on caller [S390] dasd: sync after async probe [S390] dasd: check_characteristics cleanup [S390] dasd: no High Performance FICON in 31-bit mode [S390] dcssblk: revert devt conversion [S390] qdio: fix access beyond ARRAY_SIZE of irq_ptr->{in,out}put_qs [S390] vmalloc: add vmalloc kernel parameter support [S390] uaccess: use might_fault() instead of might_sleep() [S390] 3270: lock dependency fixes [S390] 3270: do not register with tty_register_device ... 13 June 2009, 01:18:05 UTC
cd166bd Linus Torvalds 13 June 2009, 01:15:51 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: add generic lib/checksum.c asm-generic: add a generic uaccess.h asm-generic: add generic NOMMU versions of some headers asm-generic: add generic atomic.h and io.h asm-generic: add legacy I/O header files asm-generic: add generic versions of common headers asm-generic: make bitops.h usable asm-generic: make pci.h usable directly asm-generic: make get_rtc_time overridable asm-generic: rename page.h and uaccess.h asm-generic: rename atomic.h to atomic-long.h asm-generic: add a generic unistd.h asm-generic: add generic ABI headers asm-generic: add generic sysv ipc headers asm-generic: introduce asm/bitsperlong.h asm-generic: rename termios.h, signal.h and mman.h 13 June 2009, 01:15:51 UTC
6b70246 Linus Torvalds 13 June 2009, 01:09:18 UTC Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (50 commits) drm: include kernel list header file in hashtab header drm: Export hash table functionality. drm: Split out the mm declarations in a separate header. Add atomic operations. drm/radeon: add support for RV790. drm/radeon: add rv740 drm support. drm_calloc_large: check right size, check integer overflow, use GFP_ZERO drm: Eliminate magic I2C frobbing when reading EDID drm/i915: duplicate desired mode for use by fbcon. drm/via: vfree() no need checking before calling it drm: Replace DRM_DEBUG with DRM_DEBUG_DRIVER in i915 driver drm: Replace DRM_DEBUG with DRM_DEBUG_MODE in drm_mode drm/i915: Replace DRM_DEBUG with DRM_DEBUG_KMS in intel_sdvo drm/i915: replace DRM_DEBUG with DRM_DEBUG_KMS in intel_lvds drm: add separate drm debugging levels radeon: remove _DRM_DRIVER from the preadded sarea map drm: don't associate _DRM_DRIVER maps with a master drm: simplify kcalloc() call to kzalloc(). intelfb: fix spelling of "CLOCK" drm: fix LOCK_TEST_WITH_RETURN macro drm/i915: Hook connector to encoder during load detection (fixes tv/vga detect) ... 13 June 2009, 01:09:18 UTC
947ec0b Linus Torvalds 12 June 2009, 20:17:27 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Add empty suspend/resume device irq functions PM/Hibernate: Move NVS routines into a seperate file (v2). PM/Hibernate: Rename disk.c to hibernate.c PM: Separate suspend to RAM functionality from core Driver Core: Rework platform suspend/resume, print warning PM: Remove device_type suspend()/resume() PM/Hibernate: Move memory shrinking to snapshot.c (rev. 2) PM/Suspend: Do not shrink memory before suspend PM: Remove bus_type suspend_late()/resume_early() V2 PM core: rename suspend and resume functions PM: Rename device_power_down/up() PM: Remove unused asm/suspend.h x86: unify power/cpu_(32|64).c x86: unify power/cpu_(32|64) copyright notes x86: unify power/cpu_(32|64) regarding restoring processor state x86: unify power/cpu_(32|64) regarding saving processor state x86: unify power/cpu_(32|64) global variables x86: unify power/cpu_(32|64) headers PM: Warn if interrupts are enabled during suspend-resume of sysdevs PM/ACPI/x86: Fix sparse warning in arch/x86/kernel/acpi/sleep.c 12 June 2009, 20:17:27 UTC
c53567a Linus Torvalds 12 June 2009, 20:17:12 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: use more NOFS allocation dlm: connect to nodes earlier dlm: fix use count with multiple joins dlm: Make name input parameter of {,dlm_}new_lockspace() const 12 June 2009, 20:17:12 UTC
4ddbac9 Linus Torvalds 12 June 2009, 20:16:52 UTC Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf_counter: Start documenting HAVE_PERF_COUNTERS requirements perf_counter: Add forward/backward attribute ABI compatibility perf record: Explicity program a default counter perf_counter: Remove PERF_TYPE_RAW special casing perf_counter: PERF_TYPE_HW_CACHE is a hardware counter too powerpc, perf_counter: Fix performance counter event types perf_counter/x86: Add a quirk for Atom processors perf_counter tools: Remove one L1-data alias 12 June 2009, 20:16:52 UTC
02a99ed Linus Torvalds 12 June 2009, 20:15:17 UTC Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze * 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (55 commits) microblaze: Don't use access_ok for unaligned microblaze: remove unused flat_stack_align() definition microblaze: Fix problem with early_printk in startup microblaze_mmu_v2: Makefiles microblaze_mmu_v2: Kconfig update microblaze_mmu_v2: stat.h MMU update microblaze_mmu_v2: Elf update microblaze_mmu_v2: Update dma.h for MMU microblaze_mmu_v2: Update cacheflush.h microblaze_mmu_v2: Update signal returning address microblaze_mmu_v2: Traps MMU update microblaze_mmu_v2: Enable fork syscall for MMU and add fork as vfork for noMMU microblaze_mmu_v2: Update linker script for MMU microblaze_mmu_v2: Add MMU related exceptions handling microblaze_mmu_v2: uaccess MMU update microblaze_mmu_v2: Update exception handling - MMU exception microblaze_mmu_v2: entry.S, entry.h microblaze_mmu_v2: Add CURRENT_TASK for entry.S microblaze_mmu_v2: MMU asm offset update microblaze_mmu_v2: Update tlb.h and tlbflush.h ... 12 June 2009, 20:15:17 UTC
2b10dc4 Linus Torvalds 12 June 2009, 20:14:30 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (62 commits) Blackfin: fix sparseirq/kstat_irqs fallout Blackfin: fix unused warnings after nommu update Blackfin: export the last exception cause via debugfs Blackfin: fix length checking in kgdb_ebin2mem Blackfin: kgdb: fix up error return values Blackfin: push access_ok() L1 attribute down Blackfin: punt duplicated search_exception_table() prototype Blackfin: add missing access_ok() checks to user functions Blackfin: convert early_printk EVT init to a loop Blackfin: document the lsl variants of the L1 allocator Blackfin: rename Blackfin relocs according to the toolchain Blackfin: check SIC defines rather than variant names Blackfin: add SSYNC to set_dma_sg() for descriptor fetching Blackfin: convert SMP to only use generic time framework Blackfin: bf548-ezkit/bf537-stamp: add resources for ADXL345/346 Blackfin: override default uClinux MTD addr/size Blackfin: fix command line corruption with DEBUG_DOUBLEFAULT Blackfin: fix handling of initial L1 reservation Blackfin: merge sram init functions Blackfin: drop unused reserve_pda() function ... 12 June 2009, 20:14:30 UTC
47ea421 Linus Torvalds 12 June 2009, 20:14:15 UTC Merge branch 'for-linus' of git://linux-arm.org/linux-2.6 * 'for-linus' of git://linux-arm.org/linux-2.6: kmemleak: Add more info to the MAINTAINERS entry kmemleak: Remove the kmemleak.h include in drivers/char/vt.c 12 June 2009, 20:14:15 UTC
5818a6e Heiko Carstens 11 June 2009, 19:59:21 UTC PM: Add empty suspend/resume device irq functions git commit 0a0c5168 "PM: Introduce functions for suspending and resuming device interrupts" introduced some helper functions. However these functions are only available for architectures which support GENERIC_HARDIRQS. Other architectures will see this build error: drivers/built-in.o: In function `sysdev_suspend': (.text+0x15138): undefined reference to `check_wakeup_irqs' drivers/built-in.o: In function `device_power_up': (.text+0x1cb66): undefined reference to `resume_device_irqs' drivers/built-in.o: In function `device_power_down': (.text+0x1cb92): undefined reference to `suspend_device_irqs' To fix this add some empty inline functions for !GENERIC_HARDIRQS. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 June 2009, 19:32:33 UTC
fce2b11 Cornelia Huck 09 June 2009, 23:28:19 UTC PM/Hibernate: Move NVS routines into a seperate file (v2). The *_nvs_* routines in swsusp.c make use of the io*map() functions, which are only provided for HAS_IOMEM, thus breaking compilation if HAS_IOMEM is not set. Fix this by moving the *_nvs_* routines into hibernate_nvs.c, which is only compiled if HAS_IOMEM is set. [rjw: Change the name of the new file to hibernate_nvs.c, add the license line to the header comment.] Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 June 2009, 19:32:33 UTC
8b759b8 Rafael J. Wysocki 09 June 2009, 23:27:49 UTC PM/Hibernate: Rename disk.c to hibernate.c Change the name of kernel/power/disk.c to kernel/power/hibernate.c in analogy with the file names introduced by the changes that separated the suspend to RAM and standby funtionality from the common PM functions. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> 12 June 2009, 19:32:33 UTC
a9d7052 Rafael J. Wysocki 09 June 2009, 23:27:12 UTC PM: Separate suspend to RAM functionality from core Move the suspend to RAM and standby code from kernel/power/main.c to two separate files, kernel/power/suspend.c containing the basic functions and kernel/power/suspend_test.c containing the automatic suspend test facility based on the RTC clock alarm. There are no changes in functionality related to these modifications. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> 12 June 2009, 19:32:33 UTC
783ea7d Magnus Damm 04 June 2009, 20:13:33 UTC Driver Core: Rework platform suspend/resume, print warning This patch reworks the platform driver code for legacy suspend and resume to avoid installing callbacks in struct device_driver. A warning is also added telling users to update the platform driver to use dev_pm_ops. The functions platform_legacy_suspend()/resume() directly call suspend and resume callbacks in struct platform_driver instead of wrapping things in platform_drv_suspend()/resume(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 June 2009, 19:32:32 UTC
0072578 Magnus Damm 04 June 2009, 20:13:25 UTC PM: Remove device_type suspend()/resume() This patch removes the legacy callbacks ->suspend() and ->resume() from struct device_type. These callbacks seem unused, and new code should instead make use of struct dev_pm_ops. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 June 2009, 19:32:32 UTC
fe41953 Rafael J. Wysocki 11 June 2009, 21:11:17 UTC PM/Hibernate: Move memory shrinking to snapshot.c (rev. 2) A future patch is going to modify the memory shrinking code so that it will make memory allocations to free memory instead of using an artificial memory shrinking mechanism for that. For this purpose it is convenient to move swsusp_shrink_memory() from kernel/power/swsusp.c to kernel/power/snapshot.c, because the new memory-shrinking code is going to use things that are local to kernel/power/snapshot.c . [rev. 2: Make some functions static and remove their headers from kernel/power/power.h] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Wu Fengguang <fengguang.wu@intel.com> 12 June 2009, 19:32:32 UTC
c6f37f1 Rafael J. Wysocki 24 May 2009, 20:16:31 UTC PM/Suspend: Do not shrink memory before suspend Remove the shrinking of memory from the suspend-to-RAM code, where it is not really necessary. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Nigel Cunningham <nigel@tuxonice.net> Acked-by: Wu Fengguang <fengguang.wu@intel.com> 12 June 2009, 19:32:32 UTC
e240b58 Magnus Damm 24 May 2009, 20:05:54 UTC PM: Remove bus_type suspend_late()/resume_early() V2 Remove the ->suspend_late() and ->resume_early() callbacks from struct bus_type V2. These callbacks are legacy stuff at this point and since there seem to be no in-tree users we may as well remove them. New users should use dev_pm_ops. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 June 2009, 19:32:31 UTC
d161630 Alan Stern 24 May 2009, 20:05:42 UTC PM core: rename suspend and resume functions This patch (as1241) renames a bunch of functions in the PM core. Rather than go through a boring list of name changes, suffice it to say that in the end we have a bunch of pairs of functions: device_resume_noirq dpm_resume_noirq device_resume dpm_resume device_complete dpm_complete device_suspend_noirq dpm_suspend_noirq device_suspend dpm_suspend device_prepare dpm_prepare in which device_X does the X operation on a single device and dpm_X invokes device_X for all devices in the dpm_list. In addition, the old dpm_power_up and device_resume_noirq have been combined into a single function (dpm_resume_noirq). Lastly, dpm_suspend_start and dpm_resume_end are the renamed versions of the former top-level device_suspend and device_resume routines. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 June 2009, 19:32:31 UTC
e39a71e Magnus Damm 14 May 2009, 22:53:26 UTC PM: Rename device_power_down/up() Rename the functions performing "_noirq" dev_pm_ops operations from device_power_down() and device_power_up() to device_suspend_noirq() and device_resume_noirq(). The new function names are chosen to show that the functions are responsible for calling the _noirq() versions to finalize the suspend/resume operation. The current function names do not perform power down/up anymore so the names may be misleading. Global function renames: - device_power_down() -> device_suspend_noirq() - device_power_up() -> device_resume_noirq() Static function renames: - suspend_device_noirq() -> __device_suspend_noirq() - resume_device_noirq() -> __device_resume_noirq() Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Len Brown <lenb@kernel.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 June 2009, 19:32:31 UTC
1380a37 Magnus Damm 14 May 2009, 22:52:00 UTC PM: Remove unused asm/suspend.h This patch removes unused asm/suspend.h files for the following architectures: alpha, arm, ia64, m68k, mips, s390, um Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 June 2009, 19:32:31 UTC
08687ae Sergio Luis 27 April 2009, 22:27:22 UTC x86: unify power/cpu_(32|64).c This is the last unification step. Here we do remove one of the files and rename the left one as cpu.c, as both are now the same. Also update power/Makefile, telling it to build cpu.o, instead of cpu_(32|64).o Signed-off-by: Sergio Luis <sergio@larces.uece.br> Signed-off-by: Lauro Salmito <laurosalmito@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 June 2009, 19:32:31 UTC
6d48bec Sergio Luis 27 April 2009, 22:27:18 UTC x86: unify power/cpu_(32|64) copyright notes In this step, we do unify the copyright notes for both files cpu_32.c and cpu_64.c, making such files exactly the same. It's the last step before the actual unification, that will rename one of them to cpu.c and remove the other one. Signed-off-by: Sergio Luis <sergio@larces.uece.br> Signed-off-by: Lauro Salmito <laurosalmito@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 June 2009, 19:32:30 UTC
3134d04 Sergio Luis 27 April 2009, 22:27:05 UTC x86: unify power/cpu_(32|64) regarding restoring processor state In this step we do unify cpu_32.c and cpu_64.c functions that work on restoring the saved processor state. Also, we do eliminate the forward declaration of fix_processor_context() for X86_64, as it's not needed anymore. Signed-off-by: Sergio Luis <sergio@larces.uece.br> Signed-off-by: Lauro Salmito <laurosalmito@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 June 2009, 19:32:30 UTC
f9ebbe5 Sergio Luis 27 April 2009, 22:27:00 UTC x86: unify power/cpu_(32|64) regarding saving processor state In this step we do unify cpu_32.c and cpu_64.c functions that work on saving the processor state. Signed-off-by: Sergio Luis <sergio@larces.uece.br> Signed-off-by: Lauro Salmito <laurosalmito@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 June 2009, 19:32:30 UTC
833b2ca Sergio Luis 27 April 2009, 22:26:50 UTC x86: unify power/cpu_(32|64) global variables Aiming total unification of cpu_32.c and cpu_64.c, in this step we do unify the global variables and existing forward declarations for such files. Signed-off-by: Sergio Luis <sergio@larces.uece.br> Signed-off-by: Lauro Salmito <laurosalmito@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 June 2009, 19:32:30 UTC
f6783d2 Sergio Luis 27 April 2009, 22:26:22 UTC x86: unify power/cpu_(32|64) headers First step towards the unification of cpu_32.c and cpu_64.c. This commit unifies the headers of such files, making both of them use the same header files. It also remove the uneeded <module.h>. Signed-off-by: Sergio Luis <sergio@larces.uece.br> Signed-off-by: Lauro Salmito <laurosalmito@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 June 2009, 19:32:29 UTC
62b0124 Rafael J. Wysocki 18 April 2009, 11:45:13 UTC PM: Warn if interrupts are enabled during suspend-resume of sysdevs Sysdevs have to be suspended and resumed with interrupts disabled and things usually break in a way that's difficult to debug if one of sysdev drivers enables interrupts by mistake during suspend or resume. Add extra checks that will generate warnings in such cases. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 June 2009, 19:32:29 UTC
ce4b3c5 Jaswinder Singh Rajput 18 April 2009, 11:44:57 UTC PM/ACPI/x86: Fix sparse warning in arch/x86/kernel/acpi/sleep.c One of the numbers in arch/x86/kernel/acpi/sleep.c is long, but it is not annotated appropriately, so sparese warns about it. Fix that. [rjw: added the changelog.] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 12 June 2009, 19:32:29 UTC
e349792 Linus Torvalds 12 June 2009, 18:16:27 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (290 commits) ALSA: pcm - Update document about xrun_debug proc file ALSA: lx6464es - support standard alsa module parameters ALSA: snd_usb_caiaq: set mixername ALSA: hda - add quirk for STAC92xx (SigmaTel STAC9205) ALSA: use card device as parent for jack input-devices ALSA: sound/ps3: Correct existing and add missing annotations ALSA: sound/ps3: Restructure driver source ALSA: sound/ps3: Fix checkpatch issues ASoC: Fix lm4857 control ALSA: ctxfi - Clear PCM resources at hw_params and hw_free ALSA: ctxfi - Check the presence of SRC instance in PCM pointer callbacks ALSA: ctxfi - Add missing start check in atc_pcm_playback_start() ALSA: ctxfi - Add use_system_timer module option ALSA: usb - Add boot quirk for C-Media 6206 USB Audio ALSA: ctxfi - Fix wrong model id for UAA ALSA: ctxfi - Clean up probe routines ALSA: hda - Fix the previous tagra-8ch patch ALSA: hda - Add 7.1 support for MSI GX620 ALSA: pcm - A helper function to compose PCM stream name for debug prints ALSA: emu10k1 - Fix minimum periods for efx playback ... 12 June 2009, 18:16:27 UTC
e3f86d3 Takashi Iwai 12 June 2009, 18:03:16 UTC Merge branch 'topic/ps3' into for-linus * topic/ps3: ALSA: sound/ps3: Correct existing and add missing annotations ALSA: sound/ps3: Restructure driver source ALSA: sound/ps3: Fix checkpatch issues 12 June 2009, 18:03:16 UTC
056c1eb Takashi Iwai 12 June 2009, 18:03:15 UTC Merge branch 'topic/pcm-jiffies-check' into for-linus * topic/pcm-jiffies-check: ALSA: pcm - Update document about xrun_debug proc file 12 June 2009, 18:03:15 UTC
be914cf Takashi Iwai 12 June 2009, 18:03:13 UTC Merge branch 'topic/misc' into for-linus * topic/misc: ALSA: use card device as parent for jack input-devices 12 June 2009, 18:03:13 UTC
31d496a Takashi Iwai 12 June 2009, 18:03:11 UTC Merge branch 'topic/lx6464es' into for-linus * topic/lx6464es: ALSA: lx6464es - support standard alsa module parameters 12 June 2009, 18:03:11 UTC
f8be792 Takashi Iwai 12 June 2009, 18:03:09 UTC Merge branch 'topic/hda' into for-linus * topic/hda: ALSA: hda - add quirk for STAC92xx (SigmaTel STAC9205) 12 June 2009, 18:03:09 UTC
80986be Takashi Iwai 12 June 2009, 18:03:06 UTC Merge branch 'topic/caiaq' into for-linus * topic/caiaq: ALSA: snd_usb_caiaq: set mixername 12 June 2009, 18:03:06 UTC
a6093a2 Takashi Iwai 12 June 2009, 18:03:04 UTC Merge branch 'topic/asoc' into for-linus * topic/asoc: ASoC: Fix lm4857 control 12 June 2009, 18:03:04 UTC
018df72 Mike Frysinger 12 June 2009, 17:17:43 UTC perf_counter: Start documenting HAVE_PERF_COUNTERS requirements Help out arch porters who want to support perf counters by listing some basic requirements. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1244827063-24046-1-git-send-email-vapier@gentoo.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> 12 June 2009, 17:37:30 UTC
6d21491 Linus Torvalds 12 June 2009, 16:52:30 UTC Merge branch 'topic/slab/earlyboot-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6 * 'topic/slab/earlyboot-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slab: setup cpu caches later on when interrupts are enabled slab,slub: don't enable interrupts during early boot slab: fix gfp flag in setup_cpu_cache() x86: make zap_low_mapping could be used early irq: slab alloc for default irq_affinity memcg: fix page_cgroup fatal error in FLATMEM 12 June 2009, 16:52:30 UTC
c9b8af0 Linus Torvalds 12 June 2009, 16:50:42 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (154 commits) [SCSI] osd: Remove out-of-tree left overs [SCSI] libosd: Use REQ_QUIET requests. [SCSI] osduld: use filp_open() when looking up an osd-device [SCSI] libosd: Define an osd_dev wrapper to retrieve the request_queue [SCSI] libosd: osd_req_{read,write} takes a length parameter [SCSI] libosd: Let _osd_req_finalize_data_integrity receive number of out_bytes [SCSI] libosd: osd_req_{read,write}_kern new API [SCSI] libosd: Better printout of OSD target system information [SCSI] libosd: OSD2r05: Attribute definitions [SCSI] libosd: OSD2r05: Additional command enums [SCSI] mpt fusion: fix up doc book comments [SCSI] mpt fusion: Added support for Broadcast primitives Event handling [SCSI] mpt fusion: Queue full event handling [SCSI] mpt fusion: RAID device handling and Dual port Raid support is added [SCSI] mpt fusion: Put IOC into ready state if it not already in ready state [SCSI] mpt fusion: Code Cleanup patch [SCSI] mpt fusion: Rescan SAS topology added [SCSI] mpt fusion: SAS topology scan changes, expander events [SCSI] mpt fusion: Firmware event implementation using seperate WorkQueue [SCSI] mpt fusion: rewrite of ioctl_cmds internal generated function ... 12 June 2009, 16:50:42 UTC
c59a264 Linus Torvalds 12 June 2009, 16:44:30 UTC Merge git://git.infradead.org/~dwmw2/firmware-2.6 * git://git.infradead.org/~dwmw2/firmware-2.6: firmware: speed up request_firmware(), v3 12 June 2009, 16:44:30 UTC
6cb8a91 Linus Torvalds 12 June 2009, 16:43:44 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: GFS2: Remove lock_kernel from gfs2_put_super() GFS2: Add tracepoints 12 June 2009, 16:43:44 UTC
7f3591c Linus Torvalds 12 June 2009, 16:32:26 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest: (31 commits) lguest: add support for indirect ring entries lguest: suppress notifications in example Launcher lguest: try to batch interrupts on network receive lguest: avoid sending interrupts to Guest when no activity occurs. lguest: implement deferred interrupts in example Launcher lguest: remove obsolete LHREQ_BREAK call lguest: have example Launcher service all devices in separate threads lguest: use eventfds for device notification eventfd: export eventfd_signal and eventfd_fget for lguest lguest: allow any process to send interrupts lguest: PAE fixes lguest: PAE support lguest: Add support for kvm_hypercall4() lguest: replace hypercall name LHCALL_SET_PMD with LHCALL_SET_PGD lguest: use native_set_* macros, which properly handle 64-bit entries when PAE is activated lguest: map switcher with executable page table entries lguest: fix writev returning short on console output lguest: clean up length-used value in example launcher lguest: Segment selectors are 16-bit long. Fix lg_cpu.ss1 definition. lguest: beyond ARRAY_SIZE of cpu->arch.gdt ... 12 June 2009, 16:32:26 UTC
16ffc3e Linus Torvalds 12 June 2009, 16:31:52 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-virtio * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-virtio: virtio: enhance id_matching for virtio drivers virtio: fix id_matching for virtio drivers virtio: handle short buffers in virtio_rng. virtio_blk: add missing __dev{init,exit} markings virtio: indirect ring entries (VIRTIO_RING_F_INDIRECT_DESC) virtio: teach virtio_has_feature() about transport features virtio: expose features in sysfs virtio_pci: optional MSI-X support virtio_pci: split up vp_interrupt virtio: find_vqs/del_vqs virtio operations virtio: add names to virtqueue struct, mapping from devices to queues. virtio: meet virtio spec by finalizing features before using device virtio: fix obsolete documentation on probe function 12 June 2009, 16:31:52 UTC
c34752b Linus Torvalds 12 June 2009, 16:31:20 UTC Merge branch 'cuse' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse * 'cuse' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: CUSE: implement CUSE - Character device in Userspace fuse: export symbols to be used by CUSE fuse: update fuse_conn_init() and separate out fuse_conn_kill() fuse: don't use inode in fuse_file_poll fuse: don't use inode in fuse_do_ioctl() helper fuse: don't use inode in fuse_sync_release() fuse: create fuse_do_open() helper for CUSE fuse: clean up args in fuse_finish_open() and fuse_release_fill() fuse: don't use inode in helpers called by fuse_direct_io() fuse: add members to struct fuse_file fuse: prepare fuse_direct_io() for CUSE fuse: clean up fuse_write_fill() fuse: use struct path in release structure fuse: misc cleanups 12 June 2009, 16:31:20 UTC
65d52cc Linus Torvalds 12 June 2009, 16:30:36 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-module-and-param * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-module-and-param: module: cleanup FIXME comments about trimming exception table entries. module: trim exception table on init free. module: merge module_alloc() finally uml module: fix uml build process due to this merge x86 module: merge the rest functions with macros x86 module: merge the same functions in module_32.c and module_64.c uvesafb: improve parameter handling. module_param: allow 'bool' module_params to be bool, not just int. module_param: add __same_type convenience wrapper for __builtin_types_compatible_p module_param: split perm field into flags and perm module_param: invbool should take a 'bool', not an 'int' cyber2000fb.c: use proper method for stopping unload if CONFIG_ARCH_SHARK 12 June 2009, 16:30:36 UTC
d614aec Linus Torvalds 12 June 2009, 16:29:42 UTC Merge branch 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (29 commits) ide: re-implement ide_pci_init_one() on top of ide_pci_init_two() ide: unexport ide_find_dma_mode() ide: fix PowerMac bootup oops ide: skip probe if there are no devices on the port (v2) sl82c105: add printk() logging facility ide-tape: fix proc warning ide: add IDE_DFLAG_NIEN_QUIRK device flag ide: respect quirk_drives[] list on all controllers hpt366: enable all quirks for devices on quirk_drives[] list hpt366: sync quirk_drives[] list with pdc202xx_{new,old}.c ide: remove superfluous SELECT_MASK() call from do_rw_taskfile() ide: remove superfluous SELECT_MASK() call from ide_driveid_update() icside: remove superfluous ->maskproc method ide-tape: fix IDE_AFLAG_* atomic accesses ide-tape: change IDE_AFLAG_IGNORE_DSC non-atomically pdc202xx_old: kill resetproc() method pdc202xx_old: don't call pdc202xx_reset() on IRQ timeout pdc202xx_old: use ide_dma_test_irq() ide: preserve Host Protected Area by default (v2) ide-gd: implement block device ->set_capacity method (v2) ... 12 June 2009, 16:29:42 UTC
db8e7f1 Linus Torvalds 12 June 2009, 16:26:32 UTC Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Provide _sdata in the vmlinux.lds.S file x86: handle initrd that extends into unusable memory 12 June 2009, 16:26:32 UTC
8429db5 Pekka Enberg 12 June 2009, 12:58:59 UTC slab: setup cpu caches later on when interrupts are enabled Fixes the following boot-time warning: [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at kernel/smp.c:369 smp_call_function_many+0x56/0x1bc() [ 0.000000] Hardware name: [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.30 #492 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff8149e021>] ? _spin_unlock+0x4f/0x5c [ 0.000000] [<ffffffff8108f11b>] ? smp_call_function_many+0x56/0x1bc [ 0.000000] [<ffffffff81061764>] warn_slowpath_common+0x7c/0xa9 [ 0.000000] [<ffffffff810617a5>] warn_slowpath_null+0x14/0x16 [ 0.000000] [<ffffffff8108f11b>] smp_call_function_many+0x56/0x1bc [ 0.000000] [<ffffffff810f3e00>] ? do_ccupdate_local+0x0/0x54 [ 0.000000] [<ffffffff810f3e00>] ? do_ccupdate_local+0x0/0x54 [ 0.000000] [<ffffffff8108f2be>] smp_call_function+0x3d/0x68 [ 0.000000] [<ffffffff810f3e00>] ? do_ccupdate_local+0x0/0x54 [ 0.000000] [<ffffffff81066fd8>] on_each_cpu+0x31/0x7c [ 0.000000] [<ffffffff810f64f5>] do_tune_cpucache+0x119/0x454 [ 0.000000] [<ffffffff81087080>] ? lockdep_init_map+0x94/0x10b [ 0.000000] [<ffffffff818133b0>] ? kmem_cache_init+0x421/0x593 [ 0.000000] [<ffffffff810f69cf>] enable_cpucache+0x68/0xad [ 0.000000] [<ffffffff818133c3>] kmem_cache_init+0x434/0x593 [ 0.000000] [<ffffffff8180987c>] ? mem_init+0x156/0x161 [ 0.000000] [<ffffffff817f8aae>] start_kernel+0x1cc/0x3b9 [ 0.000000] [<ffffffff817f829a>] x86_64_start_reservations+0xaa/0xae [ 0.000000] [<ffffffff817f837f>] x86_64_start_kernel+0xe1/0xe8 [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> 12 June 2009, 15:53:58 UTC
7e85ee0 Pekka Enberg 12 June 2009, 11:03:06 UTC slab,slub: don't enable interrupts during early boot As explained by Benjamin Herrenschmidt: Oh and btw, your patch alone doesn't fix powerpc, because it's missing a whole bunch of GFP_KERNEL's in the arch code... You would have to grep the entire kernel for things that check slab_is_available() and even then you'll be missing some. For example, slab_is_available() didn't always exist, and so in the early days on powerpc, we used a mem_init_done global that is set form mem_init() (not perfect but works in practice). And we still have code using that to do the test. Therefore, mask out __GFP_WAIT, __GFP_IO, and __GFP_FS in the slab allocators in early boot code to avoid enabling interrupts. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> 12 June 2009, 15:53:33 UTC
eb91f1d Pekka Enberg 12 June 2009, 11:56:09 UTC slab: fix gfp flag in setup_cpu_cache() Fixes the following warning during bootup when compiling with CONFIG_SLAB: [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at kernel/lockdep.c:2282 lockdep_trace_alloc+0x91/0xb9() [ 0.000000] Hardware name: [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.30 #491 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81087d84>] ? lockdep_trace_alloc+0x91/0xb9 [ 0.000000] [<ffffffff81061764>] warn_slowpath_common+0x7c/0xa9 [ 0.000000] [<ffffffff810617a5>] warn_slowpath_null+0x14/0x16 [ 0.000000] [<ffffffff81087d84>] lockdep_trace_alloc+0x91/0xb9 [ 0.000000] [<ffffffff810f5b03>] kmem_cache_alloc_node_notrace+0x26/0xdf [ 0.000000] [<ffffffff81487f4e>] ? setup_cpu_cache+0x7e/0x210 [ 0.000000] [<ffffffff81487fe3>] setup_cpu_cache+0x113/0x210 [ 0.000000] [<ffffffff810f73ff>] kmem_cache_create+0x409/0x486 [ 0.000000] [<ffffffff818131c1>] kmem_cache_init+0x232/0x593 [ 0.000000] [<ffffffff8180987c>] ? mem_init+0x156/0x161 [ 0.000000] [<ffffffff817f8aae>] start_kernel+0x1cc/0x3b9 [ 0.000000] [<ffffffff817f829a>] x86_64_start_reservations+0xaa/0xae [ 0.000000] [<ffffffff817f837f>] x86_64_start_kernel+0xe1/0xe8 [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> 12 June 2009, 15:34:32 UTC
7747a0b Felix Blyakher 11 June 2009, 22:07:28 UTC xfs: fix freeing memory in xfs_getbmap() Regression from commit 28e211700a81b0a934b6c7a4b8e7dda843634d2f. Need to free temporary buffer allocated in xfs_getbmap(). Signed-off-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: Hedi Berriche <hedi@sgi.com> Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com> Reviewed-by: Eric Sandeen <sandeen@sandeen.net> Reviewed-by: Christoph Hellwig <hch@lst.de> 12 June 2009, 15:26:52 UTC
82681a3 James Bottomley 12 June 2009, 15:02:03 UTC [SCSI] Merge branch 'linus' Conflicts: drivers/message/fusion/mptsas.c fixed up conflict between req->data_len accessors and mptsas driver updates. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 12 June 2009, 15:02:03 UTC
d1f0132 Mark McLoughlin 11 May 2009, 17:11:46 UTC lguest: add support for indirect ring entries Support the VIRTIO_RING_F_INDIRECT_DESC feature. This is a simple matter of changing the descriptor walking code to operate on a struct vring_desc* and supplying it with an indirect table if detected. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:13 UTC
b60da13 Rusty Russell 13 June 2009, 04:27:12 UTC lguest: suppress notifications in example Launcher The Guest only really needs to tell us about activity when we're going to listen to the eventfd: normally, we don't want to know. So if there are no available buffers, turn on notifications, re-check, then wait for the Guest to notify us via the eventfd, then turn notifications off again. There's enough else going on that the differences are in the noise. Before: Secs RxKicks TxKicks 1G TCP Guest->Host: 3.94 4686 32815 1M normal pings: 104 142862 1000010 1M 1k pings (-l 120): 57 142026 1000007 After: 1G TCP Guest->Host: 3.76 4691 32811 1M normal pings: 111 142859 997467 1M 1k pings (-l 120): 55 19648 501549 Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:13 UTC
4a8962e Rusty Russell 13 June 2009, 04:27:12 UTC lguest: try to batch interrupts on network receive Rather than triggering an interrupt every time, we only trigger an interrupt when there are no more incoming packets (or the recv queue is full). However, the overhead of doing the select to figure this out is measurable: 1M pings goes from 98 to 104 seconds, and 1G Guest->Host TCP goes from 3.69 to 3.94 seconds. It's close to the noise though. I tested various timeouts, including reducing it as the number of pending packets increased, timing a 1 gigabyte TCP send from Guest -> Host and Host -> Guest (GSO disabled, to increase packet rate). // time tcpblast -o -s 65536 -c 16k 192.168.2.1:9999 > /dev/null Timeout Guest->Host Pkts/irq Host->Guest Pkts/irq Before 11.3s 1.0 6.3s 1.0 0 11.7s 1.0 6.6s 23.5 1 17.1s 8.8 8.6s 26.0 1/pending 13.4s 1.9 6.6s 23.8 2/pending 13.6s 2.8 6.6s 24.1 5/pending 14.1s 5.0 6.6s 24.4 Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:12 UTC
95c517c Rusty Russell 13 June 2009, 04:27:11 UTC lguest: avoid sending interrupts to Guest when no activity occurs. If we track how many buffers we've used, we can tell whether we really need to interrupt the Guest. This happens as a side effect of spurious notifications. Spurious notifications happen because it can take a while before the Host thread wakes up and sets the VRING_USED_F_NO_NOTIFY flag, and meanwhile the Guest can more notifications. A real fix would be to use wake counts, rather than a suppression flag, but the practical difference is generally in the noise: the interrupt is usually coalesced into a pending one anyway so we just save a system call which isn't clearly measurable. Secs Spurious IRQS 1G TCP Guest->Host: 3.93 58 1M normal pings: 100 72 1M 1k pings (-l 120): 57 492904 Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:12 UTC
38bc2b8 Rusty Russell 13 June 2009, 04:27:11 UTC lguest: implement deferred interrupts in example Launcher Rather than sending an interrupt on every buffer, we only send an interrupt when we're about to wait for the Guest to send us a new one. The console input and network input still send interrupts manually, but the block device, network and console output queues can simply rely on this logic to send interrupts to the Guest at the right time. The patch is cluttered by moving trigger_irq() higher in the code. In practice, two factors make this optimization less interesting: (1) we often only get one input at a time, even for networking, (2) triggering an interrupt rapidly tends to get coalesced anyway. Before: Secs RxIRQS TxIRQs 1G TCP Guest->Host: 3.72 32784 32771 1M normal pings: 99 1000004 995541 100,000 1k pings (-l 120): 5 49510 49058 After: 1G TCP Guest->Host: 3.69 32809 32769 1M normal pings: 99 1000004 996196 100,000 1k pings (-l 120): 5 52435 52361 (Note the interrupt count on 100k pings goes *up*: see next patch). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:11 UTC
5dac051 Rusty Russell 13 June 2009, 04:27:10 UTC lguest: remove obsolete LHREQ_BREAK call We no longer need an efficient mechanism to force the Guest back into host userspace, as each device is serviced without bothering the main Guest process (aka. the Launcher). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:11 UTC
659a0e6 Rusty Russell 13 June 2009, 04:27:10 UTC lguest: have example Launcher service all devices in separate threads Currently lguest has three threads: the main Launcher thread, a Waker thread, and a thread for the block device (because synchronous block was simply too painful to bear). The Waker selects() on all the input file descriptors (eg. stdin, net devices, pipe to the block thread) and when one becomes readable it calls into the kernel to kick the Launcher thread out into userspace, which repeats the poll, services the device(s), and then tells the kernel to release the Waker before re-entering the kernel to run the Guest. Also, to make a slightly-decent network transmit routine, the Launcher would suppress further network interrupts while it set a timer: that signal handler would write to a pipe, which would rouse the Waker which would prod the Launcher out of the kernel to check the network device again. Now we can convert all our virtqueues to separate threads: each one has a separate eventfd for when the Guest pokes the device, and can trigger interrupts in the Guest directly. The linecount shows how much this simplifies, but to really bring it home, here's an strace analysis of single Guest->Host ping before: * Guest sends packet, notifies xmit vq, return control to Launcher * Launcher clears notification flag on xmit ring * Launcher writes packet to TUN device writev(4, [{"\0\0\0\0\0\0\0\0\0\0", 10}, {"\366\r\224`\2058\272m\224vf\274\10\0E\0\0T\0\0@\0@\1\265"..., 98}], 2) = 108 * Launcher sets up interrupt for Guest (xmit ring is empty) write(10, "\2\0\0\0\3\0\0\0", 8) = 0 * Launcher sets up timer for interrupt mitigation setitimer(ITIMER_REAL, {it_interval={0, 0}, it_value={0, 505}}, NULL) = 0 * Launcher re-runs guest pread64(10, 0xbfa5f4d4, 4, 0) ... * Waker notices reply packet in tun device (it was in select) select(12, [0 3 4 6 11], NULL, NULL, NULL) = 1 (in [4]) * Waker kicks Launcher out of guest: pwrite64(10, "\3\0\0\0\1\0\0\0", 8, 0) = 0 * Launcher returns from running guest: ... = -1 EAGAIN (Resource temporarily unavailable) * Launcher looks at input fds: select(7, [0 3 4 6], NULL, NULL, {0, 0}) = 1 (in [4], left {0, 0}) * Launcher reads pong from tun device: readv(4, [{"\0\0\0\0\0\0\0\0\0\0", 10}, {"\272m\224vf\274\366\r\224`\2058\10\0E\0\0T\364\26\0\0@"..., 1518}], 2) = 108 * Launcher injects guest notification: write(10, "\2\0\0\0\2\0\0\0", 8) = 0 * Launcher rechecks fds: select(7, [0 3 4 6], NULL, NULL, {0, 0}) = 0 (Timeout) * Launcher clears Waker: pwrite64(10, "\3\0\0\0\0\0\0\0", 8, 0) = 0 * Launcher reruns Guest: pread64(10, 0xbfa5f4d4, 4, 0) = ? ERESTARTSYS (To be restarted) * Signal comes in, uses pipe to wake up Launcher: --- SIGALRM (Alarm clock) @ 0 (0) --- write(8, "\0", 1) = 1 sigreturn() = ? (mask now []) * Waker sees write on pipe: select(12, [0 3 4 6 11], NULL, NULL, NULL) = 1 (in [6]) * Waker kicks Launcher out of Guest: pwrite64(10, "\3\0\0\0\1\0\0\0", 8, 0) = 0 * Launcher exits from kernel: pread64(10, 0xbfa5f4d4, 4, 0) = -1 EAGAIN (Resource temporarily unavailable) * Launcher looks to see what fd woke it: select(7, [0 3 4 6], NULL, NULL, {0, 0}) = 1 (in [6], left {0, 0}) * Launcher reads timeout fd, sets notification flag on xmit ring read(6, "\0", 32) = 1 * Launcher rechecks fds: select(7, [0 3 4 6], NULL, NULL, {0, 0}) = 0 (Timeout) * Launcher clears Waker: pwrite64(10, "\3\0\0\0\0\0\0\0", 8, 0) = 0 * Launcher resumes Guest: pread64(10, "\0p\0\4", 4, 0) .... strace analysis of single Guest->Host ping after: * Guest sends packet, notifies xmit vq, creates event on eventfd. * Network xmit thread wakes from read on eventfd: read(7, "\1\0\0\0\0\0\0\0", 8) = 8 * Network xmit thread writes packet to TUN device writev(4, [{"\0\0\0\0\0\0\0\0\0\0", 10}, {"J\217\232FI\37j\27\375\276\0\304\10\0E\0\0T\0\0@\0@\1\265"..., 98}], 2) = 108 * Network recv thread wakes up from read on tunfd: readv(4, [{"\0\0\0\0\0\0\0\0\0\0", 10}, {"j\27\375\276\0\304J\217\232FI\37\10\0E\0\0TiO\0\0@\1\214"..., 1518}], 2) = 108 * Network recv thread sets up interrupt for the Guest write(6, "\2\0\0\0\2\0\0\0", 8) = 0 * Network recv thread goes back to reading tunfd 13:39:42.460285 readv(4, <unfinished ...> * Network xmit thread sets up interrupt for Guest (xmit ring is empty) write(6, "\2\0\0\0\3\0\0\0", 8) = 0 * Network xmit thread goes back to reading from eventfd read(7, <unfinished ...> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:10 UTC
df60aee Rusty Russell 13 June 2009, 04:27:09 UTC lguest: use eventfds for device notification Currently, when a Guest wants to perform I/O it calls LHCALL_NOTIFY with an address: the main Launcher process returns with this address, and figures out what device to run. A far nicer model is to let processes bind an eventfd to an address: if we find one, we simply signal the eventfd. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Davide Libenzi <davidel@xmailserver.org> 12 June 2009, 12:57:10 UTC
5718607 Rusty Russell 13 June 2009, 04:27:09 UTC eventfd: export eventfd_signal and eventfd_fget for lguest lguest wants to attach eventfds to guest notifications, and lguest is usually a module. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> To: Davide Libenzi <davidel@xmailserver.org> 12 June 2009, 12:57:09 UTC
9f155a9 Rusty Russell 13 June 2009, 04:27:08 UTC lguest: allow any process to send interrupts We currently only allow the Launcher process to send interrupts, but it as we already send interrupts from the hrtimer, it's a simple matter of extracting that code into a common set_interrupt routine. As we switch to a thread per virtqueue, this avoids a bottleneck through the main Launcher process. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:09 UTC
92b4d8d Rusty Russell 13 June 2009, 04:27:08 UTC lguest: PAE fixes 1) j wasn't initialized in setup_pagetables, so they weren't set up for me causing immediate guest crashes. 2) gpte_addr should not re-read the pmd from the Guest. Especially not BUG_ON() based on the value. If we ever supported SMP guests, they could trigger that. And the Launcher could also trigger it (tho currently root-only). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:08 UTC
acdd0b6 Matias Zabaljauregui 13 June 2009, 04:27:07 UTC lguest: PAE support This version requires that host and guest have the same PAE status. NX cap is not offered to the guest, yet. Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:08 UTC
cefcad1 Matias Zabaljauregui 13 June 2009, 04:27:07 UTC lguest: Add support for kvm_hypercall4() Add support for kvm_hypercall4(); PAE wants it. Signed-off-by: Matias Zabaljauregui <zabaljauregui at gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:07 UTC
ebe0ba8 Matias Zabaljauregui 30 May 2009, 18:48:08 UTC lguest: replace hypercall name LHCALL_SET_PMD with LHCALL_SET_PGD replace LHCALL_SET_PMD with LHCALL_SET_PGD hypercall name (That's really what it is, and the confusion gets worse with PAE support) Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reported-by: Jeremy Fitzhardinge <jeremy@goop.org> 12 June 2009, 12:57:07 UTC
90603d1 Matias Zabaljauregui 13 June 2009, 04:27:06 UTC lguest: use native_set_* macros, which properly handle 64-bit entries when PAE is activated Some cleanups and replace direct assignment with native_set_* macros which properly handle 64-bit entries when PAE is activated Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:06 UTC
ed1dc77 Matias Zabaljauregui 30 May 2009, 18:35:49 UTC lguest: map switcher with executable page table entries Map switcher with executable page table entries. (This bug didn't matter before PAE and hence NX support -- RR) Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:06 UTC
7b5c806 Rusty Russell 13 June 2009, 04:27:05 UTC lguest: fix writev returning short on console output I've never seen it here, but I can't find anywhere that says writev will write everything. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:05 UTC
e606490 Rusty Russell 13 June 2009, 04:27:04 UTC lguest: clean up length-used value in example launcher The "len" field in the used ring for virtio indicates the number of bytes *written* to the buffer. This means the guest doesn't have to zero the buffers in advance as it always knows the used length. Erroneously, the console and network example code puts the length *read* into that field. The guest ignores it, but it's wrong. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:05 UTC
f086122 Matias Zabaljauregui 13 June 2009, 04:27:04 UTC lguest: Segment selectors are 16-bit long. Fix lg_cpu.ss1 definition. If GDT_ENTRIES were every > 256, this could become a problem. Signed-off-by: Matias Zabaljauregui <zabaljauregui at gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:04 UTC
81b79b0 Roel Kluin 19 May 2009, 23:45:45 UTC lguest: beyond ARRAY_SIZE of cpu->arch.gdt Do not go beyond ARRAY_SIZE of cpu->arch.gdt Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:04 UTC
2644f17 Rusty Russell 13 June 2009, 04:27:03 UTC lguest: clean up example launcher compile flags. 18 months ago 5bbf89fc260830f3f58b331d946a16b39ad1ca2d changed to loading bzImages directly, and no longer manually ungzipping them, so we no longer need libz. Also, -m32 is useful for those on 64-bit platforms (and harmless on 32-bit). Reported-by: Ron Minnich <rminnich@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:03 UTC
61f4bc8 Rusty Russell 13 June 2009, 04:27:03 UTC lguest: optimize by coding restore_flags and irq_enable in assembler. The downside of the last patch which made restore_flags and irq_enable check interrupts is that they are now too big to be patched directly into the callsites, so the C versions are always used. But the C versions go via PV_CALLEE_SAVE_REGS_THUNK which saves all the registers. In fact, we don't need any registers in the fast path, so we can do better than this if we actually code them in assembler. The results are in the noise, but since it's about the same amount of code, it's worth applying. 1GB Guest->Host: input(suppressed),output(suppressed) Before: Seconds: 0:16.53 Packets: 377268,753673 Interrupts: 22461,24297 Notifications: 1(5245),21303(732370) Net IRQs triggered: 377023(245),42578(711095) After: Seconds: 0:16.48 Packets: 377289,753673 Interrupts: 22281,24465 Notifications: 1(5245),21296(732377) Net IRQs triggered: 377060(229),42564(711109) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:03 UTC
a32a881 Rusty Russell 13 June 2009, 04:27:02 UTC lguest: improve interrupt handling, speed up stream networking lguest never checked for pending interrupts when enabling interrupts, and things still worked. However, it makes a significant difference to TCP performance, so it's time we fixed it by introducing a pending_irq flag and checking it on irq_restore and irq_enable. These two routines are now too big to patch into the 8/10 bytes patch space, so we drop that code. Note: The high latency on interrupt delivery had a very curious effect: once everything else was optimized, networking without GSO was faster than networking with GSO, since more interrupts were sent and hence a greater chance of one getting through to the Guest! Note2: (Almost) Closing the same loophole for iret doesn't have any measurable effect, so I'm leaving that patch for the moment. Before: 1GB tcpblast Guest->Host: 30.7 seconds 1GB tcpblast Guest->Host (no GSO): 76.0 seconds After: 1GB tcpblast Guest->Host: 6.8 seconds 1GB tcpblast Guest->Host (no GSO): 27.8 seconds Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:03 UTC
abd41f0 Rusty Russell 13 June 2009, 04:27:02 UTC lguest: fix race in halt code When the Guest does the LHCALL_HALT hypercall, we go to sleep, expecting that a timer or the Waker will wake_up_process() us. But we do it in a stupid way, leaving a classic missing wakeup race. So split maybe_do_interrupt() into interrupt_pending() and try_deliver_interrupt(), and check maybe_do_interrupt() and the "break_out" flag before calling schedule. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:02 UTC
ebf9a5a Rusty Russell 13 June 2009, 04:27:01 UTC lguest: remove invalid interrupt forcing logic. 20887611523e749d99cc7d64ff6c97d27529fbae (lguest: notify on empty) introduced lguest support for the VIRTIO_F_NOTIFY_ON_EMPTY flag, but in fact it turned on interrupts all the time. Because we always process one buffer at a time, the inflight count is always 0 when call trigger_irq and so we always ignore VRING_AVAIL_F_NO_INTERRUPT from the Guest. It should be looking to see if there are more buffers in the Guest's queue: if it's empty, then we force an interrupt. This makes little difference, since we usually have an empty queue; but that's the subject of another patch. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:02 UTC
a6c372d Rusty Russell 13 June 2009, 04:27:01 UTC lguest: fix lguest wake on guest clock tick, or fd activity The Launcher could be inside the Guest on another CPU; wake_up_process will do nothing because it is "running". kick_process will knock it back into our kernel in this case, otherwise we'll miss it until the next guest exit. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:01 UTC
b43e352 Rusty Russell 13 June 2009, 04:27:00 UTC sched: export kick_process lguest needs kick_process: wake_up_process() does nothing if a process is running, which isn't sufficient (we need it in the kernel). And lguest support is usually modular. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu> 12 June 2009, 12:57:01 UTC
f7027c6 Rusty Russell 13 June 2009, 04:27:00 UTC lguest: get more serious about wmb() in example Launcher code Since the Launcher process runs the Guest, it doesn't have to be very serious about its barriers: the Guest isn't running while we are (Guest is UP). Before we change to use threads to service devices, we need to fix this. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:00 UTC
1028375 Rusty Russell 13 June 2009, 04:26:59 UTC lguest: clean up lguest_init_IRQ Copy from arch/x86/kernel/irqinit_32.c: we don't use the vectors beyond LGUEST_IRQS (if any), but we might as well set them all. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:57:00 UTC
56739c8 Rusty Russell 13 June 2009, 04:26:59 UTC lguest: cleanup passing of /dev/lguest fd around example launcher. We hand the /dev/lguest fd everywhere; it's far neater to just make it a global (it already is, in fact, hidden in the waker_fds struct). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:56:59 UTC
713b15b Rusty Russell 13 June 2009, 04:26:58 UTC lguest: be paranoid about guest playing with device descriptors. We can't trust the values in the device descriptor table once the guest has booted, so keep local copies. They could set them to strange values then cause us to segv (they're 8 bit values, so they can't make our pointers go too wild). This becomes more important with the following patches which read them. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:56:59 UTC
e335385 Christian Borntraeger 26 May 2009, 13:46:10 UTC virtio: enhance id_matching for virtio drivers This patch allows a virtio driver to use VIRTIO_DEV_ANY_ID for the device id. This will be used by a test module that can be bound to any virtio device. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:46:40 UTC
c89e801 Christian Borntraeger 26 May 2009, 13:46:09 UTC virtio: fix id_matching for virtio drivers This bug never appeared, since all current virtio drivers use VIRTIO_DEV_ANY_ID for the vendor field. If a real vendor would be used, the check in virtio_id_match is wrong - it returns 0 if id->vendor == dev->id.vendor. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 12 June 2009, 12:46:40 UTC
back to top