https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
995d312 xprtrdma: Replace outdated comment for rpcrdma_ep_post Since commit 7c8d9e7c8863 ("xprtrdma: Move Receive posting to Receive handler"), rpcrdma_ep_post is no longer responsible for posting Receive buffers. Update the documenting comment to reflect this change. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
e0f86bc xprtrdma: Update comments in frwr_op_send Commit f2877623082b ("xprtrdma: Chain Send to FastReg WRs") was written before commit ce5b37178283 ("xprtrdma: Replace all usage of "frmr" with "frwr""), but was merged afterwards. Thus it still refers to FRMR and MWs. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
acf0a39 SUNRPC: Fix some kernel doc complaints Clean up some warnings observed when building with "make W=1". Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
dc5820b SUNRPC: Simplify defining common RPC trace events Clean up, no functional change is expected. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
5b2095d NFS: Fix NFSv4 symbolic trace point output These symbolic values were not being displayed in string form. TRACE_DEFINE_ENUM was missing in many cases. It also turns out that __print_symbolic wants an unsigned long in the first field... Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
53b2c1c xprtrdma: Trace mapping, alloc, and dereg failures These are rare, but can be helpful at tracking down DMAR and other problems. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
395069f xprtrdma: Add trace points for calls to transport switch methods Name them "trace_xprtrdma_op_*" so they can be easily enabled as a group. No trace point is added where the generic layer already has observability. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
ba217ec xprtrdma: Relocate the xprtrdma_mr_map trace points The mr_map trace points were capturing information about the previous use of the MR rather than about the segment that was just mapped. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
aba1183 xprtrdma: Clean up of xprtrdma chunk trace points The chunk-related trace points capture nearly the same information as the MR-related trace points. Also, rename them so globbing can be used to enable or disable these trace points more easily. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
9bef848 xprtrdma: Remove unused fields from rpcrdma_ia Clean up. The last use of these fields was in commit 173b8f49b3af ("xprtrdma: Demote "connect" log messages") . Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
ddbb347 xprtrdma: Cull dprintk() call sites Clean up: Remove dprintk() call sites that report rare or impossible errors. Leave a few that display high-value low noise status information. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
92f4433 xprtrdma: Simplify locking that protects the rl_allreqs list Clean up: There's little chance of contention between the use of rb_lock and rb_reqslock, so merge the two. This avoids having to take both in some (possibly future) cases. Transport tear-down is already serialized, thus there is no need for locking at all when destroying rpcrdma_reqs. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
236b094 xprtrdma: Expose transport header errors For better observability of parsing errors, return the error code generated in the decoders to the upper layer consumer. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
889ee07 xprtrdma: Remove request_module from backchannel Since commit ffe1f0df5862 ("rpcrdma: Merge svcrdma and xprtrdma modules into one"), the forward and backchannel components are part of the same kernel module. A separate request_module() call in the backchannel code is no longer necessary. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:17 UTC
15303d9 xprtrdma: Recognize XDRBUF_SPARSE_PAGES Commit 431f6eb3570f ("SUNRPC: Add a label for RPC calls that require allocation on receive") didn't update similar logic in rpc_rdma.c. I don't think this is a bug, per-se; the commit just adds more careful checking for broken upper layer behavior. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:17 UTC
0dfbb5f NFS: Make "port=" mount option optional for RDMA mounts Having to specify "proto=rdma,port=20049" is cumbersome. RFC 8267 Section 6.3 requires NFSv4 clients to use "the alternative well-known port number", which is 20049. Make the use of the well- known port number automatic, just as it is for NFS/TCP and port 2049. For NFSv2/3, Section 4.2 allows clients to simply choose 20049 as the default or use rpcbind. I don't know of an NFS/RDMA server implementation that registers it's NFS/RDMA service with rpcbind, so automatically choosing 20049 seems like the better choice. The other widely-deployed NFS/RDMA client, Solaris, also uses 20049 as the default port. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:17 UTC
0a93fbc xprtrdma: Plant XID in on-the-wire RDMA offset (FRWR) Place the associated RPC transaction's XID in the upper 32 bits of each RDMA segment's rdma_offset field. There are two reasons to do this: - The R_key only has 8 bits that are different from registration to registration. The XID adds more uniqueness to each RDMA segment to reduce the likelihood of a software bug on the server reading from or writing into memory it's not supposed to. - On-the-wire RDMA Read and Write requests do not otherwise carry any identifier that matches them up to an RPC. The XID in the upper 32 bits will act as an eye-catcher in network captures. Suggested-by: Tom Talpey <ttalpey@microsoft.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:17 UTC
5f62412 xprtrdma: Remove rpcrdma_memreg_ops Clean up: Now that there is only FRWR, there is no need for a memory registration switch. The indirect calls to the memreg operations can be replaced with faster direct calls. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:17 UTC
ba69cd1 xprtrdma: Remove support for FMR memory registration FMR is not supported on most recent RDMA devices. It is also less secure than FRWR because an FMR memory registration can expose adjacent bytes to remote reading or writing. As discussed during the RDMA BoF at LPC 2018, it is time to remove support for FMR in the NFS/RDMA client stack. Note that NFS/RDMA server-side uses either local memory registration or FRWR. FMR is not used. There are a few Infiniband/RoCE devices in the kernel tree that do not appear to support MEM_MGT_EXTENSIONS (FRWR), and therefore will not support client-side NFS/RDMA after this patch. These are: - mthca - qib - hns (RoCE) Users of these devices can use NFS/TCP on IPoIB instead. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:17 UTC
a788684 xprtrdma: Reduce max_frwr_depth Some devices advertise a large max_fast_reg_page_list_len capability, but perform optimally when MRs are significantly smaller than that depth -- probably when the MR itself is no larger than a page. By default, the RDMA R/W core API uses max_sge_rd as the maximum page depth for MRs. For some devices, the value of max_sge_rd is 1, which is also not optimal. Thus, when max_sge_rd is larger than 1, use that value. Otherwise use the value of the max_fast_reg_page_list_len attribute. I've tested this with CX-3 Pro, FastLinq, and CX-5 devices. It reproducibly improves the throughput of large I/Os by several percent. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:17 UTC
6946f82 xprtrdma: Fix ri_max_segs and the result of ro_maxpages With certain combinations of krb5i/p, MR size, and r/wsize, I/O can fail with EMSGSIZE. This is because the calculated value of ri_max_segs (the max number of MRs per RPC) exceeded RPCRDMA_MAX_HDR_SEGS, which caused Read or Write list encoding to walk off the end of the transport header. Once that was addressed, the ro_maxpages result has to be corrected to account for the number of MRs needed for Reply chunks, which is 2 MRs smaller than a normal Read or Write chunk. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:16 UTC
0c0829b xprtrdma: Don't wake pending tasks until disconnect is done Transport disconnect processing does a "wake pending tasks" at various points. Suppose an RPC Reply is being processed. The RPC task that Reply goes with is waiting on the pending queue. If a disconnect wake-up happens before reply processing is done, that reply, even if it is good, is thrown away, and the RPC has to be sent again. This window apparently does not exist for socket transports because there is a lock held while a reply is being received which prevents the wake-up call until after reply processing is done. To resolve this, all RPC replies being processed on an RPC-over-RDMA transport have to complete before pending tasks are awoken due to a transport disconnect. Callers that already hold the transport write lock may invoke ->ops->close directly. Others use a generic helper that schedules a close when the write lock can be taken safely. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:16 UTC
3d433ad xprtrdma: No qp_event disconnect After thinking about this more, and auditing other kernel ULP imple- mentations, I believe that a DISCONNECT cm_event will occur after a fatal QP event. If that's the case, there's no need for an explicit disconnect in the QP event handler. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:16 UTC
6d2d0ee xprtrdma: Replace rpcrdma_receive_wq with a per-xprt workqueue To address a connection-close ordering problem, we need the ability to drain the RPC completions running on rpcrdma_receive_wq for just one transport. Give each transport its own RPC completion workqueue, and drain that workqueue when disconnecting the transport. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:16 UTC
6ceea36 xprtrdma: Refactor Receive accounting Clean up: Divide the work cleanly: - rpcrdma_wc_receive is responsible only for RDMA Receives - rpcrdma_reply_handler is responsible only for RPC Replies - the posted send and receive counts both belong in rpcrdma_ep Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:16 UTC
b674c4b xprtrdma: Ensure MRs are DMA-unmapped when posting LOCAL_INV fails The recovery case in frwr_op_unmap_sync needs to DMA unmap each MR. frwr_release_mr does not DMA-unmap, but the recycle worker does. Fixes: 61da886bf74e ("xprtrdma: Explicitly resetting MRs is ... ") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:16 UTC
e2f34e2 xprtrdma: Yet another double DMA-unmap While chasing yet another set of DMAR fault reports, I noticed that the frwr recycler conflates whether or not an MR has been DMA unmapped with frwr->fr_state. Actually the two have only an indirect relationship. It's in fact impossible to guess reliably whether the MR has been DMA unmapped based on its fr_state field, especially as the surrounding code and its assumptions have changed over time. A better approach is to track the DMA mapping status explicitly so that the recycler is less brittle to unexpected situations, and attempts to DMA-unmap a second time are prevented. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # v4.20 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:16 UTC
594d164 NFS: nfs_compare_mount_options always compare auth flavors. This patch removes the check from nfs_compare_mount_options to see if a `sec' option was passed for the current mount before comparing auth flavors and instead just always compares auth flavors. Consider the following scenario: You have a server with the address 192.168.1.1 and two exports /export/a and /export/b. The first export supports `sys' and `krb5' security, the second just `sys'. Assume you start with no mounts from the server. The following results in EIOs being returned as the kernel nfs client incorrectly thinks it can share the underlying `struct nfs_server's: $ mkdir /tmp/{a,b} $ sudo mount -t nfs -o vers=3,sec=krb5 192.168.1.1:/export/a /tmp/a $ sudo mount -t nfs -o vers=3 192.168.1.1:/export/b /tmp/b $ df >/dev/null df: ‘/tmp/b’: Input/output error Signed-off-by: Chris Perl <cperl@janestreet.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 21 December 2018, 18:38:45 UTC
04d1532 SUNRPC discard cr_uid from struct rpc_cred. Just use ->cr_cred->fsuid directly. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:46 UTC
2edd8d7 SUNRPC: simplify auth_unix. 1/ discard 'struct unx_cred'. We don't need any data that is not already in 'struct rpc_cred'. 2/ Don't keep these creds in a hash table. When a credential is needed, simply allocate it. When not needed, discard it. This can easily be faster than performing a lookup on a shared hash table. As the lookup can happen during write-out, use a mempool to ensure forward progress. This means that we cannot compare two credentials for equality by comparing the pointers, but we never do that anyway. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:46 UTC
d6efccd SUNRPC: remove crbind rpc_cred operation This now always just does get_rpccred(), so we don't need an operation pointer to know to do that. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:46 UTC
89a4f75 SUNRPC: remove generic cred code. This is no longer used. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:46 UTC
a52458b NFS/NFSD/SUNRPC: replace generic creds with 'struct cred'. SUNRPC has two sorts of credentials, both of which appear as "struct rpc_cred". There are "generic credentials" which are supplied by clients such as NFS and passed in 'struct rpc_message' to indicate which user should be used to authorize the request, and there are low-level credentials such as AUTH_NULL, AUTH_UNIX, AUTH_GSS which describe the credential to be sent over the wires. This patch replaces all the generic credentials by 'struct cred' pointers - the credential structure used throughout Linux. For machine credentials, there is a special 'struct cred *' pointer which is statically allocated and recognized where needed as having a special meaning. A look-up of a low-level cred will map this to a machine credential. Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:46 UTC
684f39b NFS: struct nfs_open_dir_context: convert rpc_cred pointer to cred. Use the common 'struct cred' to pass credentials for readdir. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:46 UTC
b68572e NFS: change access cache to use 'struct cred'. Rather than keying the access cache with 'struct rpc_cred', use 'struct cred'. Then use cred_fscmp() to compare credentials rather than comparing the raw pointer. A benefit of this approach is that in the common case we avoid the rpc_lookup_cred_nonblock() call which can be slow when the cred cache is large. This also keeps many fewer items pinned in the rpc cred cache, so the cred cache is less likely to get large. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:45 UTC
354698b SUNRPC: remove RPCAUTH_AUTH_NO_CRKEY_TIMEOUT This is no longer used. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:45 UTC
ddf529e NFS: move credential expiry tracking out of SUNRPC into NFS. NFS needs to know when a credential is about to expire so that it can modify write-back behaviour to finish the write inside the expiry time. It currently uses functions in SUNRPC code which make use of a fairly complex callback scheme and flags in the generic credientials. As I am working to discard the generic credentials, this has to change. This patch moves the logic into NFS, in part by finding and caching the low-level credential in the open_context. We then make direct cred-api calls on that. This makes the code much simpler and removes a dependency on generic rpc credentials. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:45 UTC
1de7eea SUNRPC: add side channel to use non-generic cred for rpc call. The credential passed in rpc_message.rpc_cred is always a generic credential except in one instance. When gss_destroying_context() calls rpc_call_null(), it passes a specific credential that it needs to destroy. In this case the RPC acts *on* the credential rather than being authorized by it. This special case deserves explicit support and providing that will mean that rpc_message.rpc_cred is *always* generic, allowing some optimizations. So add "tk_op_cred" to rpc_task and "rpc_op_cred" to the setup data. Use this to pass the cred down from rpc_call_null(), and have rpcauth_bindcred() notice it and bind it in place. Credit to kernel test robot <fengguang.wu@intel.com> for finding a bug in earlier version of this patch. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:45 UTC
a68a72e SUNRPC: introduce RPC_TASK_NULLCREDS to request auth_none In almost all cases the credential stored in rpc_message.rpc_cred is a "generic" credential. One of the two expections is when an AUTH_NULL credential is used such as for RPC ping requests. To improve consistency, don't pass an explicit credential in these cases, but instead pass NULL and set a task flag, similar to RPC_TASK_ROOTCREDS, which requests that NULL credentials be used by default. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:45 UTC
5e16923 NFS/SUNRPC: don't lookup machine credential until rpcauth_bindcred(). When NFS creates a machine credential, it is a "generic" credential, not tied to any auth protocol, and is really just a container for the princpal name. This doesn't get linked to a genuine credential until rpcauth_bindcred() is called. The lookup always succeeds, so various places that test if the machine credential is NULL, are pointless. As a step towards getting rid of generic credentials, this patch gets rid of generic machine credentials. The nfs_client and rpc_client just hold a pointer to a constant principal name. When a machine credential is wanted, a special static 'struct rpc_cred' pointer is used. rpcauth_bindcred() recognizes this, finds the principal from the client, and binds the correct credential. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:45 UTC
ecd5f97 SUNRPC: discard RPC_DO_ROOTOVERRIDE() it is never used. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:45 UTC
f15e1e8 NFSv4: don't require lock for get_renew_cred or get_machine_cred This lock is no longer necessary. If nfs4_get_renew_cred() needs to hunt through the open-state creds for a user cred, it still takes the lock to stablize the rbtree, but otherwise there are no races. Note that this completely removes the lock from nfs4_renew_state(). It appears that the original need for the locking here was removed long ago, and there is no longer anything to protect. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:45 UTC
a534ecb NFSv4: add cl_root_cred for use when machine cred is not available. NFSv4 state management tries a root credential when no machine credential is available, as can happen with kerberos. It does this by replacing the cl_machine_cred with a root credential. This means that any user of the machine credential needs to take a lock while getting a reference to the machine credential, which is a little cumbersome. So introduce an explicit cl_root_cred, and never free either credential until client shutdown. This means that no locking is needed to reference these credentials. Future patches will make use of this. This is only a temporary addition. both cl_machine_cred and cl_root_cred will disappear later in the series. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:45 UTC
1a80810 SUNRPC: remove machine_cred field from struct auth_cred The cred is a machine_cred iff ->principal is set, so there is no need for the extra flag. There is one case which deserves some explanation. nfs4_root_machine_cred() calls rpc_lookup_machine_cred() with a NULL principal name which results in not getting a machine credential, but getting a root credential instead. This appears to be what is expected of the caller, and is clearly the result provided by both auth_unix and auth_gss which already ignore the flag. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:45 UTC
8276c90 SUNRPC: remove uid and gid from struct auth_cred Use cred->fsuid and cred->fsgid instead. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:45 UTC
fc0664f SUNRPC: remove groupinfo from struct auth_cred. We can use cred->groupinfo (from the 'struct cred') instead. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:45 UTC
97f68c6 SUNRPC: add 'struct cred *' to auth_cred and rpc_cred The SUNRPC credential framework was put together before Linux has 'struct cred'. Now that we have it, it makes sense to use it. This first step just includes a suitable 'struct cred *' pointer in every 'struct auth_cred' and almost every 'struct rpc_cred'. The rpc_cred used for auth_null has a NULL 'struct cred *' as nothing else really makes sense. For rpc_cred, the pointer is reference counted. For auth_cred it isn't. struct auth_cred are either allocated on the stack, in which case the thread owns a reference to the auth, or are part of 'struct generic_cred' in which case gc_base owns the reference, and "acred" shares it. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:44 UTC
f06bc03 cred: allow get_cred() and put_cred() to be given NULL. It is common practice for helpers like this to silently, accept a NULL pointer. get_rpccred() and put_rpccred() used by NFS act this way and using the same interface will ease the conversion for NFS, and simplify the resulting code. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:44 UTC
a6d8e76 cred: export get_task_cred(). There is no reason that modules should not be able to use this, and NFS will need it when converted to use 'struct cred'. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:44 UTC
97d0fb2 cred: add get_cred_rcu() Sometimes we want to opportunistically get a ref to a cred in an rcu_read_lock protected section. get_task_cred() does this, and NFS does as similar thing with its own credential structures. To prepare for NFS converting to use 'struct cred' more uniformly, define get_cred_rcu(), and use it in get_task_cred(). Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:44 UTC
d89b22d cred: add cred_fscmp() for comparing creds. NFS needs to compare to credentials, to see if they can be treated the same w.r.t. filesystem access. Sometimes an ordering is needed when credentials are used as a key to an rbtree. NFS currently has its own private credential management from before 'struct cred' existed. To move it over to more consistent use of 'struct cred' we need a comparison function. This patch adds that function. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:44 UTC
8e2e5b7 SUNRPC: allow /proc entries without CONFIG_SUNRPC_DEBUG If we want /proc/sys/sunrpc the current kernel also drags in other debug features which we don't really want. Instead, we should always show the following entries: /proc/sys/sunrpc/udp_slot_table_entries /proc/sys/sunrpc/tcp_slot_table_entries /proc/sys/sunrpc/tcp_max_slot_table_entries /proc/sys/sunrpc/min_resvport /proc/sys/sunrpc/max_resvport /proc/sys/sunrpc/tcp_fin_timeout Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:44 UTC
ac0aa5e nfs: fix comment to nfs_generic_pg_test which does the opposite Please see comment to filelayout_pg_test for reference. To: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Anna Schumaker <anna.schumaker@netapp.com> Cc: linux-nfs@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:44 UTC
069d5bf NFSv4: cleanup remove unused nfs4_xdev_fs_type commit e8f25e6d6d19 "NFS: Remove the NFS v4 xdev mount function" removed the last use of this. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 19 December 2018, 18:52:44 UTC
abc1327 SUNRPC: Remove xprt_connect_status() Over the years, xprt_connect_status() has been superseded by call_connect_status(), which now handles all the errors that xprt_connect_status() does and more. Since the latter converts all errors that it doesn't recognise to EIO, then it is time for it to be retired. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Chuck Lever <chuck.lever@oracle.com> 18 December 2018, 16:04:10 UTC
cf76785 SUNRPC: Fix a race with XPRT_CONNECTING Ensure that we clear XPRT_CONNECTING before releasing the XPRT_LOCK so that we don't have races between the (asynchronous) socket setup code and tasks in xprt_connect(). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Chuck Lever <chuck.lever@oracle.com> 18 December 2018, 16:04:03 UTC
0445f92 SUNRPC: Fix disconnection races When the socket is closed, we need to call xprt_disconnect_done() in order to clean up the XPRT_WRITE_SPACE flag, and wake up the sleeping tasks. However, we also want to ensure that we don't wake them up before the socket is closed, since that would cause thundering herd issues with everyone piling up to retransmit before the TCP shutdown dance has completed. Only the task that holds XPRT_LOCKED needs to wake up early in order to allow the close to complete. Reported-by: Dave Wysochanski <dwysocha@redhat.com> Reported-by: Scott Mayhew <smayhew@redhat.com> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Chuck Lever <chuck.lever@oracle.com> 18 December 2018, 16:03:57 UTC
7566ec3 Linux 4.20-rc7 16 December 2018, 23:46:55 UTC
6531e11 Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "11 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: scripts/spdxcheck.py: always open files in binary mode checkstack.pl: fix for aarch64 userfaultfd: check VM_MAYWRITE was set after verifying the uffd is registered fs/iomap.c: get/put the page in iomap_page_create/release() hugetlbfs: call VM_BUG_ON_PAGE earlier in free_huge_page() memblock: annotate memblock_is_reserved() with __init_memblock psi: fix reference to kernel commandline enable arch/sh/include/asm/io.h: provide prototypes for PCI I/O mapping in asm/io.h mm/sparse: add common helper to mark all memblocks present mm: introduce common STRUCT_PAGE_MAX_SHIFT define alpha: fix hang caused by the bootmem removal 14 December 2018, 23:35:30 UTC
3a6ab5c scripts/spdxcheck.py: always open files in binary mode The spdxcheck script currently falls over when confronted with a binary file (such as Documentation/logo.gif). To avoid that, always open files in binary mode and decode line-by-line, ignoring encoding errors. One tricky case is when piping data into the script and reading it from standard input. By default, standard input will be opened in text mode, so we need to reopen it in binary mode. The breakage only happens with python3 and results in a UnicodeDecodeError (according to Uwe). Link: http://lkml.kernel.org/r/20181212131210.28024-1-thierry.reding@gmail.com Fixes: 6f4d29df66ac ("scripts/spdxcheck.py: make python3 compliant") Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Jeremy Cline <jcline@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joe Perches <joe@perches.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 December 2018, 23:05:45 UTC
f1733a1 checkstack.pl: fix for aarch64 There is actually a space after "sp," like this, ffff2000080813c8: a9bb7bfd stp x29, x30, [sp, #-80]! Right now, checkstack.pl isn't able to print anything on aarch64, because it won't be able to match the stating objdump line of a function due to this missing space. Hence, it displays every stack as zero-size. After this patch, checkpatch.pl is able to match the start of a function's objdump, and is then able to calculate each function's stack correctly. Link: http://lkml.kernel.org/r/20181207195843.38528-1-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 December 2018, 23:05:45 UTC
01e881f userfaultfd: check VM_MAYWRITE was set after verifying the uffd is registered Calling UFFDIO_UNREGISTER on virtual ranges not yet registered in uffd could trigger an harmless false positive WARN_ON. Check the vma is already registered before checking VM_MAYWRITE to shut off the false positive warning. Link: http://lkml.kernel.org/r/20181206212028.18726-2-aarcange@redhat.com Cc: <stable@vger.kernel.org> Fixes: 29ec90660d68 ("userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: syzbot+06c7092e7d71218a2c16@syzkaller.appspotmail.com Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 December 2018, 23:05:45 UTC
61c6de6 fs/iomap.c: get/put the page in iomap_page_create/release() migrate_page_move_mapping() expects pages with private data set to have a page_count elevated by 1. This is what used to happen for xfs through the buffer_heads code before the switch to iomap in commit 82cb14175e7d ("xfs: add support for sub-pagesize writeback without buffer_heads"). Not having the count elevated causes move_pages() to fail on memory mapped files coming from xfs. Make iomap compatible with the migrate_page_move_mapping() assumption by elevating the page count as part of iomap_page_create() and lowering it in iomap_page_release(). It causes the move_pages() syscall to misbehave on memory mapped files from xfs. It does not not move any pages, which I suppose is "just" a perf issue, but it also ends up returning a positive number which is out of spec for the syscall. Talking to Michal Hocko, it sounds like returning positive numbers might be a necessary update to move_pages() anyway though (https://lkml.kernel.org/r/20181116114955.GJ14706@dhcp22.suse.cz). I only hit this in tests that verify that move_pages() actually moved the pages. The test also got confused by the positive return from move_pages() (it got treated as a success as positive numbers were not expected and not handled) making it a bit harder to track down what's going on. Link: http://lkml.kernel.org/r/20181115184140.1388751-1-pjaroszynski@nvidia.com Fixes: 82cb14175e7d ("xfs: add support for sub-pagesize writeback without buffer_heads") Signed-off-by: Piotr Jaroszynski <pjaroszynski@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Brian Foster <bfoster@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 December 2018, 23:05:45 UTC
8ace22b hugetlbfs: call VM_BUG_ON_PAGE earlier in free_huge_page() A stack trace was triggered by VM_BUG_ON_PAGE(page_mapcount(page), page) in free_huge_page(). Unfortunately, the page->mapping field was set to NULL before this test. This made it more difficult to determine the root cause of the problem. Move the VM_BUG_ON_PAGE tests earlier in the function so that if they do trigger more information is present in the page struct. Link: http://lkml.kernel.org/r/1543491843-23438-1-git-send-email-nic_w@163.com Signed-off-by: Yongkai Wu <nic_w@163.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 December 2018, 23:05:45 UTC
f5a222d memblock: annotate memblock_is_reserved() with __init_memblock Found warning: WARNING: EXPORT symbol "gsi_write_channel_scratch" [vmlinux] version generation failed, symbol will not be versioned. WARNING: vmlinux.o(.text+0x1e0a0): Section mismatch in reference from the function valid_phys_addr_range() to the function .init.text:memblock_is_reserved() The function valid_phys_addr_range() references the function __init memblock_is_reserved(). This is often because valid_phys_addr_range lacks a __init annotation or the annotation of memblock_is_reserved is wrong. Use __init_memblock instead of __init. Link: http://lkml.kernel.org/r/BLUPR13MB02893411BF12EACB61888E80DFAE0@BLUPR13MB0289.namprd13.prod.outlook.com Signed-off-by: Yueyi Li <liyueyi@live.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 December 2018, 23:05:45 UTC
428a1cb psi: fix reference to kernel commandline enable The kernel commandline parameter named in CONFIG_PSI_DEFAULT_DISABLED help text contradicts the documentation in kernel-parameters.txt, and the code. Fix that. Link: http://lkml.kernel.org/r/20181203213416.GA12627@cmpxchg.org Fixes: e0c274472d ("psi: make disabling/enabling easier for vendor kernels") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 December 2018, 23:05:45 UTC
915c9e1 arch/sh/include/asm/io.h: provide prototypes for PCI I/O mapping in asm/io.h Most architectures provide prototypes for the PCI I/O mapping operations when asm/io.h is included but SH doesn't currently do that, leading to for example warnings in sound/pci/hda/patch_ca0132.c when pci_iomap() is used on current -next. Make SH more consistent with other architectures by including asm-generic/pci_iomap.h in asm/io.h. Link: http://lkml.kernel.org/r/20181106175142.27988-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 December 2018, 23:05:45 UTC
9def36e mm/sparse: add common helper to mark all memblocks present Presently the arches arm64, arm and sh have a function which loops through each memblock and calls memory present. riscv will require a similar function. Introduce a common memblocks_present() function that can be used by all the arches. Subsequent patches will cleanup the arches that make use of this. Link: http://lkml.kernel.org/r/20181107205433.3875-3-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 December 2018, 23:05:45 UTC
d1402fc mm: introduce common STRUCT_PAGE_MAX_SHIFT define This define is used by arm64 to calculate the size of the vmemmap region. It is defined as the log2 of the upper bound on the size of a struct page. We move it into mm_types.h so it can be defined properly instead of set and checked with a build bug. This also allows us to use the same define for riscv. Link: http://lkml.kernel.org/r/20181107205433.3875-2-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 December 2018, 23:05:45 UTC
5b52609 alpha: fix hang caused by the bootmem removal The conversion of alpha to memblock as the early memory manager caused boot to hang as described at [1]. The issue is caused because for CONFIG_DISCTONTIGMEM=y case, memblock_add() is called using memory start PFN that had been rounded down to the nearest 8Mb and it caused memblock to see more memory that is actually present in the system. Besides, memblock allocates memory from high addresses while bootmem was using low memory, which broke the assumption that early allocations are always accessible by the hardware. This patch ensures that memblock_add() is using the correct PFN for the memory start and forces memblock to use bottom-up allocations. [1] https://lkml.org/lkml/2018/11/22/1032 Link: http://lkml.kernel.org/r/1543233216-25833-1-git-send-email-rppt@linux.ibm.com Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Meelis Roos <mroos@linux.ee> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 December 2018, 23:05:44 UTC
380ef2c Merge tag 'for-linus-20181214' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "Three small fixes for this week. contains: - spectre indexing fix for aio (Jeff) - fix for the previous zeroing bio fix, we don't need it for user mapped pages, and in fact it breaks some applications if we do (Keith) - allocation failure fix for null_blk with zoned (Shin'ichiro)" * tag 'for-linus-20181214' of git://git.kernel.dk/linux-block: block: Fix null_blk_zoned creation failure with small number of zones aio: fix spectre gadget in lookup_ioctx block/bio: Do not zero user pages 14 December 2018, 20:18:30 UTC
743e3c8 Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One fix for the qcom QCS404 clk driver that was merged for this release. It specified the wrong parent for a PLL so a part of the clk tree wasn't rooted correctly. This fixes it by using the right name" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: qcs404: Fix gpll0_out_main parent 14 December 2018, 20:14:41 UTC
eb6cf9f Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Invalidate the caches before clearing the DMA buffer via the non-cacheable alias in the FORCE_CONTIGUOUS case" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: dma-mapping: Fix FORCE_CONTIGUOUS buffer clearing 14 December 2018, 17:36:41 UTC
4645453 Merge tag 'powerpc-4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One notable fix for our change to split pt_regs between user/kernel, we forgot to update BPF to use the user-visible type which was an ABI break for BPF programs. A slightly ugly but minimal fix to do_syscall_trace_enter() so that we use tracehook_report_syscall_entry() properly. We'll rework the code in next to avoid the empty if body. Seven commits fixing bugs in the new papr_scm (Storage Class Memory) driver. The driver was finally able to be tested on the other hypervisor which exposed several bugs. The fixes are all fairly minimal at least. Fix a crash in our MSI code if an MSI-capable device is plugged into a non-MSI capable PHB, only seen on older hardware (MPC8378). Fix our legacy serial code to look for "stdout-path" since the device trees were updated to use that instead of "linux,stdout-path". A change to the COFF zImage code to fix booting old powermacs. A couple of minor build fixes. Thanks to: Benjamin Herrenschmidt, Daniel Axtens, Dmitry V. Levin, Elvira Khabirova, Oliver O'Halloran, Paul Mackerras, Radu Rendec, Rob Herring, Sandipan Das" * tag 'powerpc-4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/ptrace: replace ptrace_report_syscall() with a tracehook call powerpc/mm: Fallback to RAM if the altmap is unusable powerpc/papr_scm: Use ibm,unit-guid as the iset cookie powerpc/papr_scm: Fix DIMM device registration race powerpc/papr_scm: Remove endian conversions powerpc/papr_scm: Update DT properties powerpc/papr_scm: Fix resource end address powerpc/papr_scm: Use depend instead of select powerpc/bpf: Fix broken uapi for BPF_PROG_TYPE_PERF_EVENT powerpc/boot: Fix build failures with -j 1 powerpc: Look for "stdout-path" when setting up legacy consoles powerpc/msi: Fix NULL pointer access in teardown code powerpc/mm: Fix linux page tables build with some configs powerpc: Fix COFF zImage booting on old powermacs 14 December 2018, 17:33:34 UTC
c19bf74 Merge tag 'ceph-for-4.20-rc7' of https://github.com/ceph/ceph-client Pull ceph fix from Ilya Dryomov: "Luis discovered a problem with the new copyfrom offload on the server side. Disable it for now" * tag 'ceph-for-4.20-rc7' of https://github.com/ceph/ceph-client: ceph: make 'nocopyfrom' a default mount option 14 December 2018, 17:22:14 UTC
7fb5f5d Merge tag 'pinctrl-v4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Three pin control fixes for the v4.20 series. Just odd drivers, so nothing particularly interesting: - Set the tile property on Qualcomm SDM60. - Fix up enable register calculation for the Meson - Fix an IRQ offset on the Sunxi (Allwinner)" * tag 'pinctrl-v4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sunxi: a83t: Fix IRQ offset typo for PH11 pinctrl: meson: fix pull enable register calculation pinctrl: sdm660: Set tile property for pingroups 14 December 2018, 17:17:17 UTC
92de1de Merge tag 'drm-fixes-2018-12-14' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "While I hoped things would calm down, the world hasn't joined with me, but it's a few things scattered over a wide area. The i915 workarounds regression fix is probably the largest, the rest are more usual sized. We also get some new AMD PCI IDs. There is also a patch in here to MAINTAINERS to added Daniel as an official DRM toplevel co-maintainer, he's decided he wants to step up and share the glory, and he'll likely process next weeks fixes while I'm away on holidays. Summary: amdgpu: - some new PCI IDs - fixed firmware image updates - power management fixes - locking warning fix nouveau: - framebuffer flushing fix - memory leak fix - tegra device init regression fix vmwgfx: - OOM kernel memory fix - excess return in function fix i915: - the biggest fix is a regression fix where workarounds weren't getting reapplied after a gpu hang causing further crashing, this fixes the workaround application to make it happen again - GPU hang fixes for Braswell and some GEN3 GPUs - GVT fix for broadwell tiling rockchip: - revert to fix a regression causing a WARN on shutdown mediatek: - avoid crash attaching to non-existant bridges" * tag 'drm-fixes-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (23 commits) drm/vmwgfx: Protect from excessive execbuf kernel memory allocations v3 MAINTAINERS: Daniel for drm co-maintainer drm/amdgpu: drop fclk/gfxclk ratio setting drm/vmwgfx: remove redundant return ret statement drm/i915: Flush GPU relocs harder for gen3 drm/i915: Allocate a common scratch page drm/i915/execlists: Apply a full mb before execution for Braswell drm/nouveau/kms: Fix memory leak in nv50_mstm_del() drm/nouveau/kms/nv50-: also flush fb writes when rewinding push buffer drm/amdgpu: Fix DEBUG_LOCKS_WARN_ON(depth <= 0) in amdgpu_ctx.lock Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec" drm/nouveau/drm/nouveau: tegra: Call nouveau_drm_device_init() drm/amdgpu/powerplay: Apply avfs cks-off voltages on VI drm/amdgpu: update SMC firmware image for polaris10 variants drm/amdkfd: add new vega20 pci id drm/amdkfd: add new vega10 pci ids drm/amdgpu: add some additional vega20 pci ids drm/amdgpu: add some additional vega10 pci ids drm/amdgpu: update smu firmware images for VI variants (v2) drm/i915: Introduce per-engine workarounds ... 14 December 2018, 17:12:02 UTC
880b9df Merge tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-dax Pull XArray fixes from Matthew Wilcox: "Two bugfixes, each with test-suite updates, two improvements to the test-suite without associated bugs, and one patch adding a missing API" * tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-dax: XArray: Fix xa_alloc when id exceeds max XArray tests: Check iterating over multiorder entries XArray tests: Handle larger indices more elegantly XArray: Add xa_cmpxchg_irq and xa_cmpxchg_bh radix tree: Don't return retry entries from lookup 14 December 2018, 00:35:58 UTC
65e08c5 Merge tag 'linux-kselftest-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fix from Shuah Khan: "A single fix for a seccomp test from Kees Cook." * tag 'linux-kselftest-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/seccomp: Remove SIGSTOP si_pid check 13 December 2018, 20:57:21 UTC
76a5cfb Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal fixes from Eduardo Valentin: "Fixes for STM and HISI thermal drivers" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: stm32: Fix stm_thermal_read_factory_settings thermal: stm32: read factory settings inside stm_thermal_prepare thermal/drivers/hisi: Fix number of sensors on hi3660 thermal/drivers/hisi: Fix wrong platform_get_irq_byname() 13 December 2018, 20:02:41 UTC
1df07a7 Merge branch 'vmwgfx-fixes-4.20' of git://people.freedesktop.org/~thomash/linux into drm-fixes One regression fix for avoiding kernel OOM, one cleanup return fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181213122815.10581-1-thellstrom@vmware.com 13 December 2018, 19:37:44 UTC
4848361 XArray: Fix xa_alloc when id exceeds max Specifying a starting ID greater than the maximum ID isn't something attempted very often, but it should fail. It was succeeding due to xas_find_marked() returning the wrong error state, so add tests for both xa_alloc() and xas_find_marked(). Fixes: b803b42823d0 ("xarray: Add XArray iterators") Signed-off-by: Matthew Wilcox <willy@infradead.org> 13 December 2018, 19:07:33 UTC
e10db79 Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma fixes from Doug Ledford: "We have 5 small fixes for this pull request. One is a performance regression, so not necessarily strictly a fix, but it was small and reasonable and claimed to avoid thrashing in the scheduler, so I took it. The remaining are all legitimate fixes that match the "we take fixes any time" criteria. Summary: - One performance regression for hfi1 - One kasan fix for hfi1 - A couple mlx5 fixes - A core oops fix" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/core: Fix oops in netdev_next_upper_dev_rcu() IB/mlx5: Block DEVX umem from the non applicable cases IB/mlx5: Fix implicit ODP interrupted page fault IB/hfi1: Fix an out-of-bounds access in get_hw_stats IB/hfi1: Fix a latency issue for small messages 13 December 2018, 19:02:23 UTC
e861e11 Merge tag 'mmc-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull mmc fixes from Ulf Hansson: "MMC core: - Fixup RPMB requests to use mrq->sbc when sending CMD23 MMC host: - omap: Fix broken MMC/SD on OMAP15XX/OMAP5910/OMAP310 - sdhci-omap: Fix DCRC error handling during tuning - sdhci: Fixup the timeout check window for clock and reset" * tag 'mmc-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci: fix the timeout check window for clock and reset mmc: sdhci-omap: Fix DCRC error handling during tuning MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5910/OMAP310 mmc: core: use mrq->sbc when sending CMD23 for RPMB 13 December 2018, 18:59:02 UTC
52a7dc2 Merge tag 'sound-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Only usual suspects here: a few more fixups for Realtek HD-audio on various PCs, including a regression fix in the previous fix for Lenovo X1 Carbon, as well as a typo fix in the recent Fireface patch" * tag 'sound-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Enable audio jacks of ASUS UX433FN/UX333FA with ALC294 ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294 ALSA: hda/realtek: ALC294 mic and headset-mode fixups for ASUS X542UN ALSA: fireface: fix reference to wrong register for clock configuration ALSA: hda/realtek - Fix the mute LED regresion on Lenovo X1 Carbon ALSA: hda/realtek - Fixed headphone issue for ALC700 13 December 2018, 18:54:13 UTC
fd56746 drm/vmwgfx: Protect from excessive execbuf kernel memory allocations v3 With the new validation code, a malicious user-space app could potentially submit command streams with enough buffer-object and resource references in them to have the resulting allocated validion nodes and relocations make the kernel run out of GFP_KERNEL memory. Protect from this by having the validation code reserve TTM graphics memory when allocating. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com> --- v2: Removed leftover debug printouts 13 December 2018, 12:04:25 UTC
67f2a93 Merge tag 'for-4.20/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM cache metadata to verify that a cache has block before trying to continue with operation that requires them. - Fix bio-based DM core's dm_make_request() to properly impose device limits on individual bios by making use of blk_queue_split(). - Fix long-standing race with how DM thinp notified userspace of thin-pool mode state changes before they were actually made. - Fix the zoned target's bio completion handling; this is a fairly invassive fix at this stage but it is localized to the zoned target. Any zoned target users will benefit from this fix. * tag 'for-4.20/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: bump target version dm thin: send event about thin-pool state change _after_ making it dm zoned: Fix target BIO completion handling dm: call blk_queue_split() to impose device limits on bios dm cache metadata: verify cache has blocks in blocks_are_clean_separate_dirty() 13 December 2018, 02:29:24 UTC
14a996c Merge tag 'media/v4.20-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - one regression at vsp1 driver - some last time changes for the upcoming request API logic and for stateless codec support. As the stateless codec "cedrus" driver is at staging, don't apply the MPEG controls as part of the main V4L2 API, as those may not be ready for production yet. * tag 'media/v4.20-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: Add a Kconfig option for the Request API media: extended-controls.rst: add note to the MPEG2 state controls media: mpeg2-ctrls.h: move MPEG2 state controls to non-public header media: vicodec: set state resolution from raw format media: vivid: drop v4l2_ctrl_request_complete() from start_streaming media: vb2: don't unbind/put the object when going to state QUEUED media: vb2: keep a reference to the request until dqbuf media: vb2: skip request checks for VIDIOC_PREPARE_BUF media: vb2: don't call __vb2_queue_cancel if vb2_start_streaming failed media: cedrus: Fix a NULL vs IS_ERR() check media: vsp1: Fix LIF buffer thresholds 13 December 2018, 02:24:32 UTC
e6333d7 Merge tag 'ovl-fixes-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fixes from Miklos Szeredi: "Needed to revert a patch, because it possibly introduces a security hole. Since the patch is basically a conceptual cleanup, not a bug fix, it's safe to revert. I'm not giving up on this, and discussions seemed to have reached an agreement over how to move forward, but that can wait 'till the next release. The other two patches are fixes for bugs introduced in recent releases" * tag 'ovl-fixes-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: Revert "ovl: relax permission checking on underlying layers" ovl: fix decode of dir file handle with multi lower layers ovl: fix missing override creds in link of a metacopy upper 13 December 2018, 02:19:44 UTC
70f4828 Merge tag 'fuse-fixes-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: "There's one patch fixing a minor but long lived bug, the others are fixing regressions introduced in this cycle" * tag 'fuse-fixes-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: continue to send FUSE_RELEASEDIR when FUSE_OPEN returns ENOSYS fuse: Fix memory leak in fuse_dev_free() fuse: fix revalidation of attributes for permission check fuse: fix fsync on directory fuse: Add bad inode check in fuse_destroy_inode() 13 December 2018, 02:17:35 UTC
b588400 Merge tag 'trace-v4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "While running various ftrace tests on new development code, the kmemleak detector found some allocations that were not freed correctly. This fixes a couple of leaks in the event trigger code as well as in adding function trace filters in trace instances" * tag 'trace-v4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix memory leak of instance function hash filters tracing: Fix memory leak in set_trigger_filter() tracing: Fix memory leak in create_filter() 13 December 2018, 02:15:29 UTC
a805ce6 Merge branch 'mediatek-drm-fixes-4.20' of https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes Single bridge attachment fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.freedesktop.org/patch/msgid/1544407975.18825.3.camel@mtksdaap41 12 December 2018, 23:55:13 UTC
28adac6 MAINTAINERS: Daniel for drm co-maintainer lkml and Linus gained a CoC, and it's serious this time. Which means my no 1 reason for declining to officially step up as drm maintainer is gone, and I didn't find any new good excuse. I chatted with a few people in private already, and the biggest concern is that I mislay my community hat and start running around with my intel hat only. Or some other convenient abuse of trust. That's why this patch doesn't just need a lot of acks that mean "yeah seems fine to me", but a lot of acks that mean "yeah we'll tell you when you're over the line and usurp you from that comfy chair if you don't get it". Which I think we've been done a fairly good job here at dri-devel in general, but better to be clear. Rough idea is that I'll do this for maybe 2-3 years, helping Dave figure out a group model for drm overall. And getting the tooling and infrastructure for that off the ground. Then step down again because some other shiny thing that needs chasing. Of course as plans tend to do, this one will probably pan out a bit different in reality. Cc: David Airlie <airlied@linux.ie> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Eric Anholt <eric@anholt.net> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Sean Paul <sean@poorly.run> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181210103001.30549-1-daniel.vetter@ffwll.ch 12 December 2018, 23:35:53 UTC
b5f436e Merge branch 'linux-4.20' of git://github.com/skeggsb/linux into drm-fixes Three fixes: tegra regression fix display flushing fix mst cleanup fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv7WCPzjQZonk+eS1FgEUKirz-4LOrVpMUVMM=D-GjbVpg@mail.gmail.com 12 December 2018, 23:33:50 UTC
26eacb7 Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-fixes Fixes for 4.20: - Stability fixes for new polaris variants (e.g., RX590) - New vega pci ids - Vega20 smu fix - Ctx locking fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181212203022.3054-1-alexander.deucher@amd.com 12 December 2018, 23:24:37 UTC
e59166b Merge tag 'drm-misc-fixes-2018-12-12' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - rockchip: Revert change causing WARN on shutdown (Brian) Cc: Brian Norris <briannorris@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20181212204309.GA150523@art_vandelay 12 December 2018, 21:25:10 UTC
ce07fe9 Merge tag 'drm-intel-fixes-2018-12-12-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Two fixes to avoid GPU hangs (on Braswell and Gen3) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181212134010.GA18900@jlahtine-desk.ger.corp.intel.com 12 December 2018, 21:22:47 UTC
71fb553 Merge tag 'drm-intel-fixes-2018-12-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix for system crash after GPU hang (Bugzilla #107945) - GVT fix for guest graphics corruption (https://github.com/intel/gvt-linux/issues/61) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181207104352.GA18214@jlahtine-desk.ger.corp.intel.com 12 December 2018, 21:21:29 UTC
676fff1 drm/amdgpu: drop fclk/gfxclk ratio setting Since this is not needed any more on the latest SMC firmware. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 12 December 2018, 19:52:29 UTC
37fbd83 IB/core: Fix oops in netdev_next_upper_dev_rcu() When support for bonding of RoCE devices was added, there was necessarily a link between the RoCE device and the paired netdevice that was part of the bond. If you remove the mlx4_en module, that paired association is broken (the RoCE device is still present but the paired netdevice has been released). We need to account for this in is_upper_ndev_bond_master_filter() and filter out those links with a broken pairing or else we later oops in netdev_next_upper_dev_rcu(). Fixes: 408f1242d940 ("IB/core: Delete lower netdevice default GID entries in bonding scenario") Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 12 December 2018, 17:14:49 UTC
back to top