Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
b22b941 Hannes Frederic Sowa 17 November 2015, 13:16:52 UTC rtnetlink: fix frame size warning in rtnl_fill_ifinfo Fix the following warning: CC net/core/rtnetlink.o net/core/rtnetlink.c: In function ‘rtnl_fill_ifinfo’: net/core/rtnetlink.c:1308:1: warning: the frame size of 2864 bytes is larger than 2048 bytes [-Wframe-larger-than=] } ^ by splitting up the huge rtnl_fill_ifinfo into some smaller ones, so we don't have the huge frame allocations at the same time. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2015, 20:25:44 UTC
19125c1 Martin Zhang 17 November 2015, 12:49:30 UTC net: use skb_clone to avoid alloc_pages failure. 1. new skb only need dst and ip address(v4 or v6). 2. skb_copy may need high order pages, which is very rare on long running server. Signed-off-by: Junwei Zhang <linggao.zjw@alibaba-inc.com> Signed-off-by: Martin Zhang <martinbj2008@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2015, 20:25:44 UTC
90836b6 Tobias Klauser 17 November 2015, 09:40:21 UTC packet: Use PAGE_ALIGNED macro Use PAGE_ALIGNED(...) instead of open-coding it. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2015, 20:25:44 UTC
4194b49 Tobias Klauser 17 November 2015, 09:38:36 UTC packet: Don't check frames_per_block against negative values rb->frames_per_block is an unsigned int, thus can never be negative. Also fix spacing in the calculation of frames_per_block. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2015, 20:25:44 UTC
321beec Andrew Lunn 16 November 2015, 22:36:46 UTC net: phy: Use interrupts when available in NOLINK state The NOLINK state will poll the phy once a second to see if the link has come up. If the phy has an interrupt line, this polling can be skipped, since the phy should interrupt when the link returns. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2015, 20:25:44 UTC
819ec8e Andrew Lunn 16 November 2015, 22:34:41 UTC phy: marvell: Add support for 88E1540 PHY The 88E1540 can be found embedded in the Marvell 88E6352 switch. It is compatible with the 88E1510, so add support for it, using the 88E1510 specific functions. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2015, 20:25:43 UTC
ec0738d Yang Shi 16 November 2015, 22:35:35 UTC arm64: bpf: make BPF prologue and epilogue align with ARM64 AAPCS Save and restore FP/LR in BPF prog prologue and epilogue, save SP to FP in prologue in order to get the correct stack backtrace. However, ARM64 JIT used FP (x29) as eBPF fp register, FP is subjected to change during function call so it may cause the BPF prog stack base address change too. Use x25 to replace FP as BPF stack base register (fp). Since x25 is callee saved register, so it will keep intact during function call. It is initialized in BPF prog prologue when BPF prog is started to run everytime. Save and restore x25/x26 in BPF prologue and epilogue to keep them intact for the outside of BPF. Actually, x26 is unnecessary, but SP requires 16 bytes alignment. So, the BPF stack layout looks like: high original A64_SP => 0:+-----+ BPF prologue |FP/LR| current A64_FP => -16:+-----+ | ... | callee saved registers +-----+ | | x25/x26 BPF fp register => -80:+-----+ | | | ... | BPF prog stack | | | | current A64_SP => +-----+ | | | ... | Function call stack | | +-----+ low CC: Zi Shen Lim <zlim.lnx@gmail.com> CC: Xi Wang <xi.wang@gmail.com> Signed-off-by: Yang Shi <yang.shi@linaro.org> Acked-by: Zi Shen Lim <zlim.lnx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2015, 19:44:39 UTC
e639b8d Sabrina Dubroca 16 November 2015, 21:54:20 UTC macvlan: fix leak in macvlan_handle_frame Reset pskb in macvlan_handle_frame in case skb_share_check returned a clone. Fixes: 8a4eb5734e8d ("net: introduce rx_handler results and logic around that") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2015, 19:39:29 UTC
a534dc5 Sabrina Dubroca 16 November 2015, 21:44:53 UTC ipvlan: fix use after free of skb ipvlan_handle_frame is a rx_handler, and when it returns a value other than RX_HANDLER_CONSUMED (here, NET_RX_DROP aka RX_HANDLER_ANOTHER), __netif_receive_skb_core expects that the skb still exists and will process it further, but we just freed it. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2015, 19:39:29 UTC
cf554ad Sabrina Dubroca 16 November 2015, 21:34:26 UTC ipvlan: fix leak in ipvlan_rcv_frame Pass a **skb to ipvlan_rcv_frame so that if skb_share_check returns a new skb, we actually use it during further processing. It's safe to ignore the new skb in the ipvlan_xmit_* functions, because they call ipvlan_rcv_frame with local == true, so that dev_forward_skb is called and always takes ownership of the skb. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2015, 19:39:28 UTC
eb3f8b4 David S. Miller 17 November 2015, 19:38:36 UTC Merge branch 'vlan-reorder' Vladislav Yasevich says: ==================== Fix issues with vlans without REORDER_HEADER A while ago Phil Sutter brought up an issue with vlans without REORDER_HEADER and bridges. The problem was that if a vlan without REORDER_HEADER was a port in the bridge, the bridge ended up forwarding corrupted packets that still contained the vlan header. The same issue exists for bridge mode macvlan/macvtap devices. An additional issue with vlans without REORDER_HEADER is that stacking them also doesn't work. The reason here is that skb_reorder_vlan_header() function assumes that it on ETH_HLEN bytes deep into the packet. That is not the case, when you a vlan without REORRDER_HEADER flag set. This series attempts to correct these 2 issues. 1) To solve the stacked vlans problem, the patch simply use skb->mac_len as an offset to start copying mac addresses that is part of header reordering. 2) To fix the issue with bridge/macvlan/macvtap, the second patch simply doesn't write the vlan header back to the packet if the vlan device is either a bridge or a macvlan port. This ends up being the simplest and least performance intrussive solution. I've considered extending patch 2 to all stacked devices (essentially checked for the presense of rx_handler), but that feels like a broader restriction and _may_ break existing uses. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2015, 19:38:36 UTC
28f9ee2 Vlad Yasevich 16 November 2015, 20:43:45 UTC vlan: Do not put vlan headers back on bridge and macvlan ports When a vlan is configured with REORDER_HEADER set to 0, the vlan header is put back into the packet and makes it appear that the vlan header is still there even after it's been processed. This posses a problem for bridge and macvlan ports. The packets passed to those device may be forwarded and at the time of the forward, vlan headers end up being unexpectedly present. With the patch, we make sure that we do not put the vlan header back (when REORDER_HEADER is 0) if a bridge or macvlan has been configured on top of the vlan device. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2015, 19:38:35 UTC
a6e18ff Vlad Yasevich 16 November 2015, 20:43:44 UTC vlan: Fix untag operations of stacked vlans with REORDER_HEADER off When we have multiple stacked vlan devices all of which have turned off REORDER_HEADER flag, the untag operation does not locate the ethernet addresses correctly for nested vlans. The reason is that in case of REORDER_HEADER flag being off, the outer vlan headers are put back and the mac_len is adjusted to account for the presense of the header. Then, the subsequent untag operation, for the next level vlan, always use VLAN_ETH_HLEN to locate the begining of the ethernet header and that ends up being a multiple of 4 bytes short of the actuall beginning of the mac header (the multiple depending on the how many vlan encapsulations ethere are). As a reslult, if there are multiple levles of vlan devices with REODER_HEADER being off, the recevied packets end up being dropped. To solve this, we use skb->mac_len as the offset. The value is always set on receive path and starts out as a ETH_HLEN. The value is also updated when the vlan header manupations occur so we know it will be correct. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2015, 19:38:35 UTC
6c606fa Timo Teräs 16 November 2015, 12:36:32 UTC via-velocity: unconditionally drop frames with bad l2 length By default the driver allowed incorrect frames to be received. What is worse the code does not handle very short frames correctly. The FCS length is unconditionally subtracted, and the underflow can cause skb_put to be called with large number after implicit cast to unsigned. And indeed, an skb_over_panic() was observed with via-velocity. This removes the module parameter as it does not work in it's current state, and should be implemented via NETIF_F_RXALL if needed. Suggested-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2015, 19:37:16 UTC
f1a454a Ondrej Zary 15 November 2015, 21:36:12 UTC ipg: Remove ipg driver Now that IP1000A chips are supported by dl2k driver, the buggy ipg driver can be removed. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 22:11:31 UTC
c3f45d3 Ondrej Zary 15 November 2015, 21:36:11 UTC dl2k: Add support for IP1000A-based cards Add support for IP1000A chips to dl2k driver. IP1000A chip looks like a TC9020 with integrated PHY. This allows IP1000A chips to work reliably because the ipg driver is buggy - it loses packets under load and then completely stops transmitting data. Tested with Asus NX1101 v2.0 at 10, 100 and 1000Mbps: vendor=0x13f0 device=0x1023 (rev 0x41) subsystem vendor=0x1043 device=0x8180 MAC address registers access needed to be changed from 8-bit to 16-bit because 8-bit does not work on IP1000A. 8-bit access is not even allowed in the TC9020 datasheet (although it worked). 16-bit access works on both. Tested that it does not break D-Link DGE-550T (DL-2000 chip, probably a rebranded TC9020): vendor=0x1186 device=0x4000 (rev 0x0c) subsystem vendor=0x1186 device=0x4000 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 22:11:31 UTC
41033f0 Neil Horman 16 November 2015, 18:09:10 UTC snmp: Remove duplicate OUTMCAST stat increment the OUTMCAST stat is double incremented, getting bumped once in the mcast code itself, and again in the common ip output path. Remove the mcast bump, as its not needed Validated by the reporter, with good results Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Claus Jensen <claus.jensen@microsemi.com> CC: Claus Jensen <claus.jensen@microsemi.com> CC: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 21:36:32 UTC
7750130 Pavel Fedin 16 November 2015, 14:51:34 UTC net: thunder: Check for driver data in nicvf_remove() In some cases the crash is caused by nicvf_remove() being called from outside. For example, if we try to feed the device to vfio after the probe has failed for some reason. So, move the check to better place. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 21:24:44 UTC
88ad417 Bjørn Mork 16 November 2015, 18:16:40 UTC net/core: use netdev name in warning if no parent A recent flaw in the netdev feature setting resulted in warnings like this one from VLAN interfaces: WARNING: CPU: 1 PID: 4975 at net/core/dev.c:2419 skb_warn_bad_offload+0xbc/0xcb() : caps=(0x00000000001b5820, 0x00000000001b5829) len=2782 data_len=0 gso_size=1348 gso_type=16 ip_summed=3 The ":" is supposed to be preceded by a driver name, but in this case it is an empty string since the device has no parent. There are many types of network devices without a parent. The anonymous warnings for these devices can be hard to debug. Log the network device name instead in these cases to assist further debugging. This is mostly similar to how __netdev_printk() handles orphan devices. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 21:21:48 UTC
8844f97 Hannes Frederic Sowa 16 November 2015, 15:25:56 UTC af_unix: don't append consumed skbs to sk_receive_queue In case multiple writes to a unix stream socket race we could end up in a situation where we pre-allocate a new skb for use in unix_stream_sendpage but have to free it again in the locked section because another skb has been appended meanwhile, which we must use. Accidentally we didn't clear the pointer after consuming it and so we touched freed memory while appending it to the sk_receive_queue. So, clear the pointer after consuming the skb. This bug has been found with syzkaller (http://github.com/google/syzkaller) by Dmitry Vyukov. Fixes: 869e7c62486e ("net: af_unix: implement stream sendpage support") Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 20:39:35 UTC
24cb705 Dragos Tatulea 16 November 2015, 09:52:48 UTC net: switchdev: fix return code of fdb_dump stub rtnl_fdb_dump always expects an index to be returned by the ndo_fdb_dump op, but when CONFIG_NET_SWITCHDEV is off, it returns an error. Fix that by returning the given unmodified idx. A similar fix was 0890cf6cb6ab ("switchdev: fix return value of switchdev_port_fdb_dump in case of error") but for the CONFIG_NET_SWITCHDEV=y case. Fixes: 45d4122ca7cd ("switchdev: add support for fdb add/del/dump via switchdev_port_obj ops.") Signed-off-by: Dragos Tatulea <dragos@endocode.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 20:24:37 UTC
ab6d784 Yuval Mintz 15 November 2015, 13:02:16 UTC bnx2x: Fix VLANs null-pointer for 57710, 57711 Commit 05cc5a39ddb7 "bnx2x: add vlan filtering offload" introduced a regression in regard for vlans for 57710, 57711 adapters - Loading 8021q module on a machine with such an adapter would cause a null pointer dereference, as the driver mistakenly publishes it has capabilities for vlan CTAG filtering. Reported-by: Otto Sabart <osabart@redhat.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 20:13:01 UTC
d60cf61 Masaru Nagai 15 November 2015, 12:34:42 UTC ravb: remove unhandle int cause This driver does not handle the AVB-DMAC Receive FIFO Warning interrupt now, so the interrupt should not be enabled. Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 20:12:25 UTC
027ac58 Ben Cartwright-Cox 14 November 2015, 15:13:58 UTC raw: increment correct SNMP counters for ICMP messages Sending ICMP packets with raw sockets ends up in the SNMP counters logging the type as the first byte of the IPv4 header rather than the ICMP header. This is fixed by adding the IP Header Length to the casting into a icmphdr struct. Signed-off-by: Ben Cartwright-Cox <ben@benjojo.co.uk> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 20:08:48 UTC
c300366 Julia Lawall 14 November 2015, 10:06:57 UTC sfc: constify pci_error_handlers structures This pci_error_handlers structure is never modified, like all the other pci_error_handlers structures, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 20:07:29 UTC
166e236 Julia Lawall 14 November 2015, 10:06:53 UTC net: cavium: liquidio: constify pci_error_handlers structures This pci_error_handlers structure is never modified, like all the other pci_error_handlers structures, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 20:07:28 UTC
d37d5ec Shrikrishna Khare 13 November 2015, 23:42:10 UTC Driver: Vmxnet3: Fix use of mfTableLen for big endian architectures Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Reported-by: Masao Uebayashi <uebayasi@gmail.com> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 20:06:47 UTC
0b88393 Daniele Palmas 13 November 2015, 17:01:21 UTC net: usb: cdc_ether: add Dell DW5580 as a mobile broadband adapter Since Dell DW5580 is a 3G modem, this patch adds the device as a mobile broadband adapter Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 19:58:39 UTC
00ee592 Nikolay Aleksandrov 13 November 2015, 14:20:24 UTC net: fix __netdev_update_features return on ndo_set_features failure If ndo_set_features fails __netdev_update_features() will return -1 but this is wrong because it is expected to return 0 if no features were changed (see netdev_update_features()), which will cause a netdev notifier to be called without any actual changes. Fix this by returning 0 if ndo_set_features fails. Fixes: 6cb6a27c45ce ("net: Call netdev_features_change() from netdev_update_features()") CC: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 19:56:03 UTC
5f8dc33 Nikolay Aleksandrov 13 November 2015, 13:54:01 UTC net: fix feature changes on devices without ndo_set_features When __netdev_update_features() was updated to ensure some features are disabled on new lower devices, an error was introduced for devices which don't have the ndo_set_features() method set. Before we'll just set the new features, but now we return an error and don't set them. Fix this by returning the old behaviour and setting err to 0 when ndo_set_features is not present. Fixes: e7868a85e1b2 ("net/core: ensure features get disabled on new lower devs") CC: Jarod Wilson <jarod@redhat.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Ido Schimmel <idosch@mellanox.com> CC: Sander Eikelenboom <linux@eikelenboom.it> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Andy Gospodarek <gospo@cumulusnetworks.com> Reviewed-by: Jarod Wilson <jarod@redhat.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Dave Young <dyoung@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 19:56:03 UTC
bbe14f5 Ido Schimmel 13 November 2015, 11:06:12 UTC switchdev: bridge: Check return code is not EOPNOTSUPP When NET_SWITCHDEV=n, switchdev_port_attr_set simply returns EOPNOTSUPP. In this case we should not emit errors and warnings to the kernel log. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: 0bc05d585d38 ("switchdev: allow caller to explicitly request attr_set as deferred") Fixes: 6ac311ae8bfb ("Adding switchdev ageing notification on port bridged") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 19:56:03 UTC
d5d3098 Ivan Vecera 13 November 2015, 10:36:58 UTC be2net: replace hardcoded values with existing define Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 19:46:05 UTC
4114ec9 Ivan Vecera 13 November 2015, 10:36:57 UTC be2net: remove unused local rsstable array Remove rsstable array and its initialization from be_set_rss_hash_opts(). The array became unused after "e255787 be2net: Support for configurable RSS hash key". The initial RSS table is now filled and stored for later usage during Rx queue creation. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 19:46:05 UTC
2452cb0 Masaru Nagai 13 November 2015, 10:24:49 UTC ravb: Fix int mask value overwritten issue When RX/TX interrupt for Network Control queue and Best Effort queue is issued at the same time, the interrupt mask of Network Control queue will be reset when the mask of Best Effort queue is set. This patch fixes this problem. Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 19:44:32 UTC
cd998ec Pavel Fedin 13 November 2015, 06:46:59 UTC net: smsc911x: Reset PHY during initialization On certain hardware after software reboot the chip may get stuck and fail to reinitialize during reset. This can be fixed by ensuring that PHY is reset too. Old PHY resetting method required operational MDIO interface, therefore the chip should have been already set up. In order to be able to function during probe, it is changed to use PMT_CTRL register. The problem could be observed on SMDK5410 board. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 19:43:14 UTC
c3d4c68 Daniel Borkmann 14 November 2015, 00:16:18 UTC bpf, arm64: start flushing icache range from header While recently going over ARM64's BPF code, I noticed that the icache range we're flushing should start at header already and not at ctx.image. Reason is that after b569c1c622c5 ("net: bpf: arm64: address randomize and write protect JIT code"), we also want to make sure to flush the random-sized trap in front of the start of the actual program (analogous to x86). No operational differences from user side. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Zi Shen Lim <zlim.lnx@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 19:41:30 UTC
ebaef64 Daniel Borkmann 14 November 2015, 00:26:53 UTC bpf, arm: start flushing icache range from header During review I noticed that the icache range we're flushing should start at header already and not at ctx.image. Reason is that after 55309dd3d4cd ("net: bpf: arm: address randomize and write protect JIT code"), we also want to make sure to flush the random-sized trap in front of the start of the actual program (analogous to x86). No operational differences from user side. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Nicolas Schichan <nschichan@freebox.fr> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 19:40:49 UTC
30b50aa Yang Shi 12 November 2015, 22:07:46 UTC bpf: samples: exclude asm/sysreg.h for arm64 commit 338d4f49d6f7114a017d294ccf7374df4f998edc ("arm64: kernel: Add support for Privileged Access Never") includes sysreg.h into futex.h and uaccess.h. But, the inline assembly used by asm/sysreg.h is incompatible with llvm so it will cause BPF samples build failure for ARM64. Since sysreg.h is useless for BPF samples, just exclude it from Makefile via defining __ASM_SYSREG_H. Signed-off-by: Yang Shi <yang.shi@linaro.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 19:40:49 UTC
0fcd593 Yang Shi 12 November 2015, 21:57:00 UTC arm64: bpf: fix JIT frame pointer setup BPF fp should point to the top of the BPF prog stack. The original implementation made it point to the bottom incorrectly. Move A64_SP to fp before reserve BPF prog stack space. CC: Zi Shen Lim <zlim.lnx@gmail.com> CC: Xi Wang <xi.wang@gmail.com> Signed-off-by: Yang Shi <yang.shi@linaro.org> Reviewed-by: Zi Shen Lim <zlim.lnx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 19:38:42 UTC
7729b05 Måns Rullgård 12 November 2015, 18:41:12 UTC net: phy: vitesse: add support for VSC8601 This adds support for the Vitesse VSC8601 PHY. Generic functions are used for everything except interrupt handling. Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 19:18:40 UTC
0eae598 Måns Rullgård 12 November 2015, 17:40:20 UTC net: phy: at803x: support interrupt on 8030 and 8035 Commit 77a993942 "phy/at8031: enable at8031 to work on interrupt mode" added interrupt support for the 8031 PHY but left out the other two chips supported by this driver. This patch sets the .ack_interrupt and .config_intr functions for the 8030 and 8035 drivers as well. Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 19:18:40 UTC
b4fe85f Jason A. Donenfeld 12 November 2015, 16:35:58 UTC ip_tunnel: disable preemption when updating per-cpu tstats Drivers like vxlan use the recently introduced udp_tunnel_xmit_skb/udp_tunnel6_xmit_skb APIs. udp_tunnel6_xmit_skb makes use of ip6tunnel_xmit, and ip6tunnel_xmit, after sending the packet, updates the struct stats using the usual u64_stats_update_begin/end calls on this_cpu_ptr(dev->tstats). udp_tunnel_xmit_skb makes use of iptunnel_xmit, which doesn't touch tstats, so drivers like vxlan, immediately after, call iptunnel_xmit_stats, which does the same thing - calls u64_stats_update_begin/end on this_cpu_ptr(dev->tstats). While vxlan is probably fine (I don't know?), calling a similar function from, say, an unbound workqueue, on a fully preemptable kernel causes real issues: [ 188.434537] BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u8:0/6 [ 188.435579] caller is debug_smp_processor_id+0x17/0x20 [ 188.435583] CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.2.6 #2 [ 188.435607] Call Trace: [ 188.435611] [<ffffffff8234e936>] dump_stack+0x4f/0x7b [ 188.435615] [<ffffffff81915f3d>] check_preemption_disabled+0x19d/0x1c0 [ 188.435619] [<ffffffff81915f77>] debug_smp_processor_id+0x17/0x20 The solution would be to protect the whole this_cpu_ptr(dev->tstats)/u64_stats_update_begin/end blocks with disabling preemption and then reenabling it. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 19:14:32 UTC
17c790a David S. Miller 16 November 2015, 01:16:26 UTC Merge branch 'mv88e6060-fixes' Neil Armstrong says: ==================== net: dsa: mv88e6060: cleanup and fix setup This patchset introduces some fixes and a registers addressing cleanup for the mv88e6060 DSA driver. The first patch removes the poll_link as mv88e6xxx. The 3 following patches fixes the setup in regards of the datasheet. The 2 last patches introduces a clean header and replaces all magic values. v2: cleanup InitReady patch, add missing Acked-by and fix header copyright notice ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 01:16:26 UTC
6a4b298 Neil Armstrong 10 November 2015, 15:51:36 UTC net: dsa: mv88e6060: replace magic values with register defines To align with the mv88e6xxx code, use the register defines to access all the register addresses and bit fields. Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 01:16:16 UTC
f7e3931 Neil Armstrong 10 November 2015, 15:51:42 UTC net: dsa: mv88e6060: add register defines header file To align with the mv88e6xxx code, add a similar header file with all the register defines. The file is based on the mv88e6xxx header for coherency. Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 01:16:16 UTC
83ea0f4 Neil Armstrong 10 November 2015, 15:51:32 UTC net: dsa: mv88e6060: use the correct bit shift for mac0 According to the mv88e6060 datasheet, the first mac byte must be at position 9 instead of 8 since the bit 8 is used to select if the mac address must differ for each port for Pause frames. Use the correct shift and set the same mac address for all port. Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 01:16:16 UTC
b73c774 Neil Armstrong 10 November 2015, 15:51:24 UTC net: dsa: mv88e6060: use the correct MaxFrameSize bit According to the mv88e6060 datasheet, the MaxFrameSize bit position is 10 instead of 11 which is reserved. Use the bit correctly to setup max frame size to 1536. Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 01:16:16 UTC
c37909b Neil Armstrong 10 November 2015, 15:51:19 UTC net: dsa: mv88e6060: use the correct InitReady bit According to the mv88e6060 datasheet, the InitReady bit position is 11 and the polarity is inverted. Use the bit correctly to detect the end of initialization. Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 01:16:15 UTC
dc1e7eb Neil Armstrong 10 November 2015, 15:51:14 UTC net: dsa: mv88e6060: remove poll_link callback As of mv88e6xxx remove the poll_link callback since the link state change polling is now handled by the phylib. Tested on a mv88e6060 B0 device with a TI DM816X SoC. Suggested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2015, 01:16:15 UTC
8863002 David S. Miller 15 November 2015, 23:43:47 UTC Merge branch 'mellanox-net-fixes' Or Gerlitz says: ==================== Mellanox NIC driver update, Nov 12, 2015 Few small mlx5 and mlx4 fixes from the team... done over net commit c5a3788 "Merge branch 'akpm' (patches from Andrew)" Eran's patch needs to go to 4.2 and 4.3 stable kernels. Tariq's patch need to go to 4.3 stable too. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 23:43:47 UTC
d49c219 Noa Osherovich 12 November 2015, 17:35:30 UTC net/mlx4_core: Avoid returning success in case of an error flow The err variable wasn't set with the correct error value in some cases. Fixes: 47605df95398 ('mlx4: Modify proxy/tunnel QP mechanism [..]') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 23:43:41 UTC
f5adbfe Eran Ben Elisha 12 November 2015, 17:35:29 UTC net/mlx4_core: Fix sleeping while holding spinlock at rem_slave_counters When cleaning slave's counter resources, we hold a spinlock that protects the slave's counters list. As part of the clean, we call __mlx4_clear_if_stat which calls mlx4_alloc_cmd_mailbox which is a sleepable function. In order to fix this issue, hold the spinlock, and copy all counter indices into a temporary array, and release the spinlock. Afterwards, iterate over this array and free every counter. Repeat this scenario until the original list is empty (a new counter might have been added while releasing the counters from the temporary array). Fixes: b72ca7e96acf ("net/mlx4_core: Reset counters data when freed") Reported-by: Moni Shoua <monis@mellanox.com> Tested-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 23:43:41 UTC
d4e28cb Achiad Shochat 12 November 2015, 17:35:28 UTC net/mlx5e: Use the right DMA free function on TX path On xmit path we use skb_frag_dma_map() which is using dma_map_page(), while upon completion we dma-unmap the skb fragments using dma_unmap_single() rather than dma_unmap_page(). To fix this, we now save the dma map type on xmit path and use this info to call the right dma unmap method upon TX completion. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 23:43:40 UTC
50a9eea Doron Tsur 12 November 2015, 17:35:27 UTC net/mlx5e: Max mtu comparison fix On change mtu the driver compares between hardware queried mtu and software requested mtu. We need to compare between software representation of the queried mtu and the requested mtu. Fixes: facc9699f0fe ('net/mlx5e: Fix HW MTU settings') Signed-off-by: Doron Tsur <doront@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 23:43:40 UTC
6618996 Tariq Toukan 12 November 2015, 17:35:26 UTC net/mlx5e: Added self loopback prevention Prevent outgoing multicast frames from looping back to the RX queue. By introducing new HW capability self_lb_en_modifiable, which indicates the support to modify self_lb_en bit in modify_tir command. When this capability is set we can prevent TIRs from sending back loopback multicast traffic to their own RQs, by "refreshing TIRs" with modify_tir command, on every time new channels (SQs/RQs) are created at device open. This is needed since TIRs are static and only allocated once on driver load, and the loopback decision is under their responsibility. Fixes issues of the kind: "IPv6: eth2: IPv6 duplicate address fe80::e61d:2dff:fe5c:f2e9 detected!" The issue is seen since the IPv6 solicitations multicast messages are loopedback and the network stack thinks they are coming from another host. Fixes: 5c50368f3831 ("net/mlx5e: Light-weight netdev open/stop") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 23:43:40 UTC
ba6c4c0 Saeed Mahameed 12 November 2015, 17:35:25 UTC net/mlx5e: Fix inline header size calculation mlx5e_get_inline_hdr_size didn't take into account the vlan insertion into the inline WQE segment. This could lead to max inline violation in cases where skb_headlen(skb) + VLAN_HLEN >= sq->max_inline. Fixes: 3ea4891db8d0 ("net/mlx5e: Fix LSO vlan insertion") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 23:43:40 UTC
340c78e Eric Dumazet 12 November 2015, 17:14:12 UTC ipvs: use skb_to_full_sk() helper SYNACK packets might be attached to request sockets. Use skb_to_full_sk() helper to avoid illegal accesses to inet_sk(skb->sk) Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Acked-by: Julian Anastasov <ja@ssi.bg> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 23:39:48 UTC
00fd38d Eric Dumazet 12 November 2015, 16:43:18 UTC tcp: ensure proper barriers in lockless contexts Some functions access TCP sockets without holding a lock and might output non consistent data, depending on compiler and or architecture. tcp_diag_get_info(), tcp_get_info(), tcp_poll(), get_tcp4_sock() ... Introduce sk_state_load() and sk_state_store() to fix the issues, and more clearly document where this lack of locking is happening. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 23:36:38 UTC
5883d9c Pavel Fedin 12 November 2015, 11:55:18 UTC net: thunder: Fix crash upon shutdown after failed probe If device probe fails, driver remains bound to the PCI device. However, driver data has been reset to NULL. This causes crash upon dereferencing it in nicvf_remove() Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 23:30:00 UTC
ed5a377 lucien 12 November 2015, 05:07:07 UTC sctp: translate host order to network order when setting a hmacid now sctp auth cannot work well when setting a hmacid manually, which is caused by that we didn't use the network order for hmacid, so fix it by adding the transformation in sctp_auth_ep_set_hmacs. even we set hmacid with the network order in userspace, it still can't work, because of this condition in sctp_auth_ep_set_hmacs(): if (id > SCTP_AUTH_HMAC_ID_MAX) return -EOPNOTSUPP; so this wasn't working before and thus it won't break compatibility. Fixes: 65b07e5d0d09 ("[SCTP]: API updates to suport SCTP-AUTH extensions.") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 23:27:27 UTC
52b4620 David S. Miller 15 November 2015, 23:00:48 UTC Merge branch 'packet-fixes' Daniel Borkmann says: ==================== packet fixes Fixes a couple of issues in packet sockets, i.e. on TX ring side. See individual patches for details. v2 -> v3: - First two patches unchanged, kept Jason's Ack - Reworked 3rd patch and split into 3: - check for dev type as discussed with Willem - infer skb->protocol - fix max len for dgram v1 -> v2: - Added patch 2 as suggested by Dave - Rest is unchanged from previous submission ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 23:00:48 UTC
5cfb4c8 Daniel Borkmann 11 November 2015, 22:25:44 UTC packet: fix tpacket_snd max frame len Since it's introduction in commit 69e3c75f4d54 ("net: TX_RING and packet mmap"), TX_RING could be used from SOCK_DGRAM and SOCK_RAW side. When used with SOCK_DGRAM only, the size_max > dev->mtu + reserve check should have reserve as 0, but currently, this is unconditionally set (in it's original form as dev->hard_header_len). I think this is not correct since tpacket_fill_skb() would then take dev->mtu and dev->hard_header_len into account for SOCK_DGRAM, the extra VLAN_HLEN could be possible in both cases. Presumably, the reserve code was copied from packet_snd(), but later on missed the check. Make it similar as we have it in packet_snd(). Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 23:00:35 UTC
c72219b Daniel Borkmann 11 November 2015, 22:25:43 UTC packet: infer protocol from ethernet header if unset In case no struct sockaddr_ll has been passed to packet socket's sendmsg() when doing a TX_RING flush run, then skb->protocol is set to po->num instead, which is the protocol passed via socket(2)/bind(2). Applications only xmitting can go the path of allocating the socket as socket(PF_PACKET, <mode>, 0) and do a bind(2) on the TX_RING with sll_protocol of 0. That way, register_prot_hook() is neither called on creation nor on bind time, which saves cycles when there's no interest in capturing anyway. That leaves us however with po->num 0 instead and therefore the TX_RING flush run sets skb->protocol to 0 as well. Eric reported that this leads to problems when using tools like trafgen over bonding device. I.e. the bonding's hash function could invoke the kernel's flow dissector, which depends on skb->protocol being properly set. In the current situation, all the traffic is then directed to a single slave. Fix it up by inferring skb->protocol from the Ethernet header when not set and we have ARPHRD_ETHER device type. This is only done in case of SOCK_RAW and where we have a dev->hard_header_len length. In case of ARPHRD_ETHER devices, this is guaranteed to cover ETH_HLEN, and therefore being accessed on the skb after the skb_store_bits(). Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 23:00:35 UTC
3c70c13 Daniel Borkmann 11 November 2015, 22:25:42 UTC packet: only allow extra vlan len on ethernet devices Packet sockets can be used by various net devices and are not really restricted to ARPHRD_ETHER device types. However, when currently checking for the extra 4 bytes that can be transmitted in VLAN case, our assumption is that we generally probe on ARPHRD_ETHER devices. Therefore, before looking into Ethernet header, check the device type first. This also fixes the issue where non-ARPHRD_ETHER devices could have no dev->hard_header_len in TX_RING SOCK_RAW case, and thus the check would test unfilled linear part of the skb (instead of non-linear). Fixes: 57f89bfa2140 ("network: Allow af_packet to transmit +4 bytes for VLAN packets.") Fixes: 52f1454f629f ("packet: allow to transmit +4 byte in TX_RING slot for VLAN case") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 23:00:35 UTC
8fd6c80 Daniel Borkmann 11 November 2015, 22:25:41 UTC packet: always probe for transport header We concluded that the skb_probe_transport_header() should better be called unconditionally. Avoiding the call into the flow dissector has also not really much to do with the direct xmit mode. While it seems that only virtio_net code makes use of GSO from non RX/TX ring packet socket paths, we should probe for a transport header nevertheless before they hit devices. Reference: http://thread.gmane.org/gmane.linux.network/386173/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 23:00:35 UTC
efdfa2f Daniel Borkmann 11 November 2015, 22:25:40 UTC packet: do skb_probe_transport_header when we actually have data In tpacket_fill_skb() commit c1aad275b029 ("packet: set transport header before doing xmit") and later on 40893fd0fd4e ("net: switch to use skb_probe_transport_header()") was probing for a transport header on the skb from a ring buffer slot, but at a time, where the skb has _not even_ been filled with data yet. So that call into the flow dissector is pretty useless. Lets do it after we've set up the skb frags. Fixes: c1aad275b029 ("packet: set transport header before doing xmit") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 23:00:35 UTC
d7475de Kamal Mostafa 11 November 2015, 22:24:27 UTC tools/net: Use include/uapi with __EXPORTED_HEADERS__ Use the local uapi headers to keep in sync with "recently" added #define's (e.g. SKF_AD_VLAN_TPID). Refactored CFLAGS, and bpf_asm doesn't need -I. Fixes: 3f356385e8a4 ("filter: bpf_asm: add minimal bpf asm tool") Signed-off-by: Kamal Mostafa <kamal@canonical.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 22:24:33 UTC
e63e904 David S. Miller 15 November 2015, 22:15:50 UTC Merge branch 'ipv6-route-fixes' Martin KaFai Lau says: ==================== ipv6: Fixes for pmtu update and DST_NOCACHE route This patchset fixes: 1. An oops during IPv6 pmtu update on a IPv4 GRE running in an IPSec setup 2. Misc fixes on DST_NOCACHE route ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 22:15:50 UTC
02bcf4e Martin KaFai Lau 11 November 2015, 19:51:08 UTC ipv6: Check rt->dst.from for the DST_NOCACHE route All DST_NOCACHE rt6_info used to have rt->dst.from set to its parent. After commit 8e3d5be73681 ("ipv6: Avoid double dst_free"), DST_NOCACHE is also set to rt6_info which does not have a parent (i.e. rt->dst.from is NULL). This patch catches the rt->dst.from == NULL case. Fixes: 8e3d5be73681 ("ipv6: Avoid double dst_free") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 22:12:37 UTC
5973fb1 Martin KaFai Lau 11 November 2015, 19:51:07 UTC ipv6: Check expire on DST_NOCACHE route Since the expires of the DST_NOCACHE rt can be set during the ip6_rt_update_pmtu(), we also need to consider the expires value when doing ip6_dst_check(). This patches creates __rt6_check_expired() to only check the expire value (if one exists) of the current rt. In rt6_dst_from_check(), it adds __rt6_check_expired() as one of the condition check. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 22:12:37 UTC
0d3f6d2 Martin KaFai Lau 11 November 2015, 19:51:06 UTC ipv6: Avoid creating RTF_CACHE from a rt that is not managed by fib6 tree The original bug report: https://bugzilla.redhat.com/show_bug.cgi?id=1272571 The setup has a IPv4 GRE tunnel running in a IPSec. The bug happens when ndisc starts sending router solicitation at the gre interface. The simplified oops stack is like: __lock_acquire+0x1b2/0x1c30 lock_acquire+0xb9/0x140 _raw_write_lock_bh+0x3f/0x50 __ip6_ins_rt+0x2e/0x60 ip6_ins_rt+0x49/0x50 ~~~~~~~~ __ip6_rt_update_pmtu.part.54+0x145/0x250 ip6_rt_update_pmtu+0x2e/0x40 ~~~~~~~~ ip_tunnel_xmit+0x1f1/0xf40 __gre_xmit+0x7a/0x90 ipgre_xmit+0x15a/0x220 dev_hard_start_xmit+0x2bd/0x480 __dev_queue_xmit+0x696/0x730 dev_queue_xmit+0x10/0x20 neigh_direct_output+0x11/0x20 ip6_finish_output2+0x21f/0x770 ip6_finish_output+0xa7/0x1d0 ip6_output+0x56/0x190 ~~~~~~~~ ndisc_send_skb+0x1d9/0x400 ndisc_send_rs+0x88/0xc0 ~~~~~~~~ The rt passed to ip6_rt_update_pmtu() is created by icmp6_dst_alloc() and it is not managed by the fib6 tree, so its rt6i_table == NULL. When __ip6_rt_update_pmtu() creates a RTF_CACHE clone, the newly created clone also has rt6i_table == NULL and it causes the ip6_ins_rt() oops. During pmtu update, we only want to create a RTF_CACHE clone from a rt which is currently managed (or owned) by the fib6 tree. It means either rt->rt6i_node != NULL or rt is a RTF_PCPU clone. It is worth to note that rt6i_table may not be NULL even it is not (yet) managed by the fib6 tree (e.g. addrconf_dst_alloc()). Hence, rt6i_node is a better check instead of rt6i_table. Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reported-by: Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu> Cc: Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 22:12:37 UTC
9001d94 Colin Ian King 11 November 2015, 15:22:40 UTC fjes: fix inconsistent indenting minor change, indenting is one tab out. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 22:09:23 UTC
73ed5d2 Hannes Frederic Sowa 10 November 2015, 15:23:15 UTC af-unix: fix use-after-free with concurrent readers while splicing During splicing an af-unix socket to a pipe we have to drop all af-unix socket locks. While doing so we allow another reader to enter unix_stream_read_generic which can read, copy and finally free another skb. If exactly this skb is just in process of being spliced we get a use-after-free report by kasan. First, we must make sure to not have a free while the skb is used during the splice operation. We simply increment its use counter before unlocking the reader lock. Stream sockets have the nice characteristic that we don't care about zero length writes and they never reach the peer socket's queue. That said, we can take the UNIXCB.consumed field as the indicator if the skb was already freed from the socket's receive queue. If the skb was fully consumed after we locked the reader side again we know it has been dropped by a second reader. We indicate a short read to user space and abort the current splice operation. This bug has been found with syzkaller (http://github.com/google/syzkaller) by Dmitry Vyukov. Fixes: 2b514574f7e8 ("net: af_unix: implement splice for stream af_unix sockets") Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2015, 18:16:34 UTC
49e4a22 Arnd Bergmann 12 November 2015, 21:03:40 UTC stmmac: avoid ipq806x constant overflow warning Building dwmac-ipq806x on a 64-bit architecture produces a harmless warning from gcc: stmmac/dwmac-ipq806x.c: In function 'ipq806x_gmac_probe': include/linux/bitops.h:6:19: warning: overflow in implicit constant conversion [-Woverflow] val = QSGMII_PHY_CDR_EN | stmmac/dwmac-ipq806x.c:333:8: note: in expansion of macro 'QSGMII_PHY_CDR_EN' #define QSGMII_PHY_CDR_EN BIT(0) #define BIT(nr) (1UL << (nr)) This is a result of the type conversion rules in C, when we take the logical OR of multiple different types. In particular, we have and unsigned long QSGMII_PHY_CDR_EN == BIT(0) == (1ul << 0) == 0x0000000000000001ul and a signed int 0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET == 0xc0000000 which together gives a signed long value 0xffffffffc0000001l and when this is passed into a function that takes an unsigned int type, gcc warns about the signed overflow and the loss of the upper 32-bits that are all ones. This patch adds 'ul' type modifiers to the literal numbers passed in here, so now the expression remains an 'unsigned long' with the upper bits all zero, and that avoids the signed overflow and the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b1c17215d718 ("stmmac: add ipq806x glue layer") Signed-off-by: David S. Miller <davem@davemloft.net> 12 November 2015, 21:11:49 UTC
382a483 David S. Miller 12 November 2015, 19:17:16 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree. This large batch that includes fixes for ipset, netfilter ingress, nf_tables dynamic set instantiation and a longstanding Kconfig dependency problem. More specifically, they are: 1) Add missing check for empty hook list at the ingress hook, from Florian Westphal. 2) Input and output interface are swapped at the ingress hook, reported by Patrick McHardy. 3) Resolve ipset extension alignment issues on ARM, patch from Jozsef Kadlecsik. 4) Fix bit check on bitmap in ipset hash type, also from Jozsef. 5) Release buckets when all entries have expired in ipset hash type, again from Jozsef. 6) Oneliner to initialize conntrack tuple object in the PPTP helper, otherwise the conntrack lookup may fail due to random bits in the structure holes, patch from Anthony Lineham. 7) Silence a bogus gcc warning in nfnetlink_log, from Arnd Bergmann. 8) Fix Kconfig dependency problems with TPROXY, socket and dup, also from Arnd. 9) Add __netdev_alloc_pcpu_stats() to allow creating percpu counters from atomic context, this is required by the follow up fix for nf_tables. 10) Fix crash from the dynamic set expression, we have to add new clone operation that should be defined when a simple memcpy is not enough. This resolves a crash when using per-cpu counters with new Patrick McHardy's flow table nft support. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 12 November 2015, 19:17:16 UTC
3917429 françois romieu 11 November 2015, 22:35:18 UTC r8169: fix kasan reported skb use-after-free. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Reported-by: Dave Jones <davej@codemonkey.org.uk> Fixes: d7d2d89d4b0af ("r8169: Add software counter for multicast packages") Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 November 2015, 18:51:01 UTC
c5a3788 Linus Torvalds 11 November 2015, 05:14:23 UTC Merge branch 'akpm' (patches from Andrew) Merge final patch-bomb from Andrew Morton: "Various leftovers, mainly Christoph's pci_dma_supported() removals" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: pci: remove pci_dma_supported usbnet: remove ifdefed out call to dma_supported kaweth: remove ifdefed out call to dma_supported sfc: don't call dma_supported nouveau: don't call pci_dma_supported netup_unidvb: use pci_set_dma_mask insted of pci_dma_supported cx23885: use pci_set_dma_mask insted of pci_dma_supported cx25821: use pci_set_dma_mask insted of pci_dma_supported cx88: use pci_set_dma_mask insted of pci_dma_supported saa7134: use pci_set_dma_mask insted of pci_dma_supported saa7164: use pci_set_dma_mask insted of pci_dma_supported tw68-core: use pci_set_dma_mask insted of pci_dma_supported pcnet32: use pci_set_dma_mask insted of pci_dma_supported lib/string.c: add ULL suffix to the constant definition hugetlb: trivial comment fix selftests/mlock2: add ULL suffix to 64-bit constants selftests/mlock2: add missing #define _GNU_SOURCE 11 November 2015, 05:14:23 UTC
5dfe5b2 Linus Torvalds 11 November 2015, 05:11:58 UTC Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull misc kbuild updates from Michal Marek: "This is the non-critical part of kbuild: - several coccinelle updates - make deb-pkg creates an armhf package if CONFIG_VFP=y - make tags understands some more powerpc macros" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: coccinelle: Improve checking for missing NULL terminators coccinelle: ifnullfree: handle various destroy functions coccinelle: ifnullfree: various cleanups cocinelle: iterators: semantic patch to delete unneeded of_node_put deb-pkg: Add automatic support for armhf architecture scripts/coccinelle: fix typos coccinelle: misc: remove "complex return code" warnings Coccinelle: fix incorrect -include option transformation coccinelle: tests: improve odd_ptr_err.cocci coccinelle: misc: move constants to the right scripts/tags.sh: Teach tags about some powerpc macros 11 November 2015, 05:11:58 UTC
152813e Linus Torvalds 11 November 2015, 05:06:50 UTC Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: - 'make xconfig' ported to Qt5, dropping support for Qt3 - merge_config.sh supports a single-input-file mode and also respects $KCONFIG_CONFIG - Fix for incorrect display of >= and > in dependency expressions * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (44 commits) Add current selection check. Use pkg-config to find Qt 4 and 5 instead of direct qmake kconfig: Fix copy&paste error kconfig/merge_config.sh: Accept a single file kconfig/merge_config.sh: Support KCONFIG_CONFIG Update the buildsystem for KConfig finding Qt Port xconfig to Qt5 - Update copyright. Port xconfig to Qt5 - Fix goParent issue. Port xconfig to Qt5 - on Back clicked, deselect old item. Port xconfig to Qt5 - Add(back) one click checkbox toggle. Port xconfig to Qt5 - Add(back) lineedit editing. Port xconfig to Qt5 - Remove some commented code. Port xconfig to Qt5 - Source format. Port xconfig to Qt5 - Add horizontal scrollbar, and scroll per pixel. Port xconfig to Qt5 - Change ConfigItem constructor parent type. Port xconfig to Qt5 - Disable ConfigList soring Port xconfig to Qt5 - Remove ConfigList::updateMenuList template. Port xconfig to Qt5 - Add ConfigList::mode to initializer list. Port xconfig to Qt5 - Add ConfigItem::nextItem to initializer list. Port xconfig to Qt5 - Tree widget set column titles. ... 11 November 2015, 05:06:50 UTC
c34e6e0 Linus Torvalds 11 November 2015, 04:55:37 UTC Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild update from Michal Marek: "The kbuild branch for v4.4-rc1 only has one commit: A new make kselftest-clean target cleans tools/testing/selftests" * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kselftest: add kselftest-clean rule 11 November 2015, 04:55:37 UTC
6a177af Linus Torvalds 11 November 2015, 04:46:45 UTC Merge tag 'linux-kselftest-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: "This 12 patch update for 4.4-rc1 consists of a new pstore test and fixes to existing tests" * tag 'linux-kselftest-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: breakpoint: Actually build it selftests: vm: Try harder to allocate huge pages selftests: Make scripts executable selftests: kprobe: Choose an always-defined function to probe selftests: memfd: Stop unnecessary rebuilds selftests: Add missing #include directives selftests/seccomp: Be more precise with syscall arguments. selftests/seccomp: build and pass on arm64 selftests: memfd_test: Revised STACK_SIZE to make it 16-byte aligned selftests/pstore: add pstore test scripts going with reboot selftests/pstore: add pstore test script for pre-reboot selftests: add .gitignore for efivarfs 11 November 2015, 04:46:45 UTC
ae36ce0 Linus Torvalds 11 November 2015, 04:37:28 UTC Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Two build fixes, one for VC4, one for nouveau where the ARM only code is doing something a bit strange. While people are discussing that, just workaround it and fix the build for now. The code in question will never get used on anything non-ARM anyways. Also one fix for AST that SuSE had been hiding in their kernel, that allows all fbdev apps to work on that driver" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: fix build failures on all non ARM. drm/ast: Initialized data needed to map fbdev memory drm/vc4: Add dependency on HAVE_DMA_ATTRS, and select DRM_GEM_CMA_HELPER 11 November 2015, 04:37:28 UTC
10855ae Dave Airlie 09 November 2015, 22:36:59 UTC drm/nouveau: fix build failures on all non ARM. gk20a is an ARM only GPU, so we can just do the correct thing on ARM but fail on other architectures. The other option was to use SWIOTLB as the define, which means phys_to_page exists, but this seems clearer. Signed-off-by: Dave Airlie <airlied@redhat.com> 11 November 2015, 02:37:57 UTC
28fb4cb Egbert Eich 11 June 2014, 12:59:55 UTC drm/ast: Initialized data needed to map fbdev memory Due to a missing initialization there was no way to map fbdev memory. Thus for example using the Xserver with the fbdev driver failed. This fix adds initialization for fix.smem_start and fix.smem_len in the fb_info structure, which fixes this problem. Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: stable@vger.kernel.org Signed-off-by: Egbert Eich <eich@suse.de> [pulled from SuSE tree by me - airlied] Signed-off-by: Dave Airlie <airlied@redhat.com> 11 November 2015, 02:27:31 UTC
2df4ee7 Linus Torvalds 11 November 2015, 02:11:41 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix null deref in xt_TEE netfilter module, from Eric Dumazet. 2) Several spots need to get to the original listner for SYN-ACK packets, most spots got this ok but some were not. Whilst covering the remaining cases, create a helper to do this. From Eric Dumazet. 3) Missiing check of return value from alloc_netdev() in CAIF SPI code, from Rasmus Villemoes. 4) Don't sleep while != TASK_RUNNING in macvtap, from Vlad Yasevich. 5) Use after free in mvneta driver, from Justin Maggard. 6) Fix race on dst->flags access in dst_release(), from Eric Dumazet. 7) Add missing ZLIB_INFLATE dependency for new qed driver. From Arnd Bergmann. 8) Fix multicast getsockopt deadlock, from WANG Cong. 9) Fix deadlock in btusb, from Kuba Pawlak. 10) Some ipv6_add_dev() failure paths were not cleaning up the SNMP6 counter state. From Sabrina Dubroca. 11) Fix packet_bind() race, which can cause lost notifications, from Francesco Ruggeri. 12) Fix MAC restoration in qlcnic driver during bonding mode changes, from Jarod Wilson. 13) Revert bridging forward delay change which broke libvirt and other userspace things, from Vlad Yasevich. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) Revert "bridge: Allow forward delay to be cfgd when STP enabled" bpf_trace: Make dependent on PERF_EVENTS qed: select ZLIB_INFLATE net: fix a race in dst_release() net: mvneta: Fix memory use after free. net: Documentation: Fix default value tcp_limit_output_bytes macvtap: Resolve possible __might_sleep warning in macvtap_do_read() mvneta: add FIXED_PHY dependency net: caif: check return value of alloc_netdev net: hisilicon: NET_VENDOR_HISILICON should depend on HAS_DMA drivers: net: xgene: fix RGMII 10/100Mb mode netfilter: nft_meta: use skb_to_full_sk() helper net_sched: em_meta: use skb_to_full_sk() helper sched: cls_flow: use skb_to_full_sk() helper netfilter: xt_owner: use skb_to_full_sk() helper smack: use skb_to_full_sk() helper net: add skb_to_full_sk() helper and use it in selinux_netlbl_skbuff_setsid() bpf: doc: correct arch list for supported eBPF JIT dwc_eth_qos: Delete an unnecessary check before the function call "of_node_put" bonding: fix panic on non-ARPHRD_ETHER enslave failure ... 11 November 2015, 02:11:41 UTC
3419b45 Linus Torvalds 11 November 2015, 01:23:49 UTC Merge branch 'for-4.4/io-poll' of git://git.kernel.dk/linux-block Pull block IO poll support from Jens Axboe: "Various groups have been doing experimentation around IO polling for (really) fast devices. The code has been reviewed and has been sitting on the side for a few releases, but this is now good enough for coordinated benchmarking and further experimentation. Currently O_DIRECT sync read/write are supported. A framework is in the works that allows scalable stats tracking so we can auto-tune this. And we'll add libaio support as well soon. Fow now, it's an opt-in feature for test purposes" * 'for-4.4/io-poll' of git://git.kernel.dk/linux-block: direct-io: be sure to assign dio->bio_bdev for both paths directio: add block polling support NVMe: add blk polling support block: add block polling support blk-mq: return tag/queue combo in the make_request_fn handlers block: change ->make_request_fn() and users to return a queue cookie 11 November 2015, 01:23:49 UTC
01504f5 Linus Torvalds 11 November 2015, 00:35:06 UTC Merge tag 'upstream-4.4-rc1' of git://git.infradead.org/linux-ubifs Pull UBI/UBIFS updates from Richard Weinberger: - access time support for UBIFS by Dongsheng Yang - random cleanups and bug fixes all over the place * tag 'upstream-4.4-rc1' of git://git.infradead.org/linux-ubifs: ubifs: introduce UBIFS_ATIME_SUPPORT to ubifs ubifs: make ubifs_[get|set]xattr atomic UBIFS: Delete unnecessary checks before the function call "iput" UBI: Remove in vain semicolon UBI: Fastmap: Fix PEB array type UBIFS: Fix possible memory leak in ubifs_readdir() fs/ubifs: remove unnecessary new_valid_dev check ubi: fastmap: Implement produce_free_peb() UBIFS: print verbose message when rescanning a corrupted node UBIFS: call dbg_is_power_cut() instead of reading c->dbg->pc_happened UBI: drop null test before destroy functions UBI: Update comments to reflect UBI_METAONLY flag UBI: Fix debug message UBI: Fix typo in comment UBI: Fastmap: Simplify expression UBIFS: fix a typo in comment of ubifs_budget_req UBIFS: use kmemdup rather than duplicating its implementation 11 November 2015, 00:35:06 UTC
4bde961 Linus Torvalds 11 November 2015, 00:33:37 UTC Merge branch 'for-linus-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - a new hrtimer based clocksource by Anton Ivanov - ptrace() enhancments by Richard Weinberger - random cleanups and bug fixes all over the place * 'for-linus-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Switch clocksource to hrtimers um: net: replace GFP_KERNEL with GFP_ATOMIC when spinlock is held um: Report host OOM more nicely um: Simplify STUB_DATA loading um: Remove dead symbol from i386 syscall stub um: Remove dead code from x86_64 syscall stub um: Get rid of open coded NR_SYSCALLS um: Store syscall number after syscall_trace_enter() um: Define PTRACE_OLDSETOPTIONS 11 November 2015, 00:33:37 UTC
247e75d Christoph Hellwig 10 November 2015, 22:45:50 UTC pci: remove pci_dma_supported Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 November 2015, 00:32:11 UTC
704c16d Christoph Hellwig 10 November 2015, 22:45:47 UTC usbnet: remove ifdefed out call to dma_supported Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Oliver Neukum <oneukum@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 November 2015, 00:32:11 UTC
21fd6c0 Christoph Hellwig 10 November 2015, 22:45:44 UTC kaweth: remove ifdefed out call to dma_supported Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oliver Neukum <oliver@neukum.org> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 November 2015, 00:32:11 UTC
8722b8f Christoph Hellwig 10 November 2015, 22:45:42 UTC sfc: don't call dma_supported dma_set_mask already checks for a supported DMA mask before updating it, the call to dma_supported is redundant. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Shradha Shah <sshah@solarflare.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 November 2015, 00:32:11 UTC
0dcc4a5 Christoph Hellwig 10 November 2015, 22:45:39 UTC nouveau: don't call pci_dma_supported Just try to set a 64-bit DMA mask first and retry with the smaller dma_mask if dma_set_mask failed. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: David Airlie <airlied@linux.ie> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Thierry Reding <treding@nvidia.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 November 2015, 00:32:11 UTC
e806f75 Christoph Hellwig 10 November 2015, 22:45:36 UTC netup_unidvb: use pci_set_dma_mask insted of pci_dma_supported This ensures the dma mask that is supported by the driver is recorded in the device structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Sergey Kozlov <serjk@netup.ru> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 November 2015, 00:32:11 UTC
4571e4a Christoph Hellwig 10 November 2015, 22:45:33 UTC cx23885: use pci_set_dma_mask insted of pci_dma_supported This ensures the dma mask that is supported by the driver is recorded in the device structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Pawel Osciak <pawel@osciak.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 November 2015, 00:32:11 UTC
251c591 Christoph Hellwig 10 November 2015, 22:45:31 UTC cx25821: use pci_set_dma_mask insted of pci_dma_supported This ensures the dma mask that is supported by the driver is recorded in the device structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 November 2015, 00:32:11 UTC
111be8b Christoph Hellwig 10 November 2015, 22:45:28 UTC cx88: use pci_set_dma_mask insted of pci_dma_supported This ensures the dma mask that is supported by the driver is recorded in the device structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 November 2015, 00:32:11 UTC
f546e12 Christoph Hellwig 10 November 2015, 22:45:25 UTC saa7134: use pci_set_dma_mask insted of pci_dma_supported This ensures the dma mask that is supported by the driver is recorded in the device structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Pawel Osciak <pawel@osciak.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 November 2015, 00:32:11 UTC
45fa9c0 Christoph Hellwig 10 November 2015, 22:45:23 UTC saa7164: use pci_set_dma_mask insted of pci_dma_supported This ensures the dma mask that is supported by the driver is recorded in the device structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Steven Toth <stoth@kernellabs.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 November 2015, 00:32:11 UTC
bad007b Christoph Hellwig 10 November 2015, 22:45:20 UTC tw68-core: use pci_set_dma_mask insted of pci_dma_supported This ensures the dma mask that is supported by the driver is recorded in the device structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Pawel Osciak <pawel@osciak.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 November 2015, 00:32:11 UTC
back to top