Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
f4602cb Jason Gunthorpe 22 May 2018, 21:56:51 UTC IB/uverbs: Fix uverbs_attr_get_obj The err pointer comes from uverbs_attr_get, not from the uobject member, which does not store an ERR_PTR. Fixes: be934cca9e98 ("IB/uverbs: Add device memory registration ioctl support") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> 23 May 2018, 21:25:53 UTC
30bf066 Kalderon, Michal 15 May 2018, 12:13:33 UTC RDMA/qedr: Fix doorbell bar mapping for dpi > 1 Each user_context receives a separate dpi value and thus a different address on the doorbell bar. The qedr_mmap function needs to validate the address and map the doorbell bar accordingly. The current implementation always checked against dpi=0 doorbell range leading to a wrong mapping for doorbell bar. (It entered an else case that mapped the address differently). qedr_mmap should only be used for doorbells, so the else was actually wrong in the first place. This only has an affect on arm architecture and not an issue on a x86 based architecture. This lead to doorbells not occurring on arm based systems and left applications that use more than one dpi (or several applications run simultaneously ) to hang. Fixes: ac1b36e55a51 ("qedr: Add support for user context verbs") Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> 23 May 2018, 21:12:14 UTC
8e907ed Lidong Chen 08 May 2018, 08:50:16 UTC IB/umem: Use the correct mm during ib_umem_release User-space may invoke ibv_reg_mr and ibv_dereg_mr in different threads. If ibv_dereg_mr is called after the thread which invoked ibv_reg_mr has exited, get_pid_task will return NULL and ib_umem_release will not decrease mm->pinned_vm. Instead of using threads to locate the mm, use the overall tgid from the ib_ucontext struct instead. This matches the behavior of ODP and disassociate in handling the mm of the process that called ibv_reg_mr. Cc: <stable@vger.kernel.org> Fixes: 87773dd56d54 ("IB: ib_umem_release() should decrement mm->pinned_vm from ib_umem_get") Signed-off-by: Lidong Chen <lidongchen@tencent.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> 15 May 2018, 23:09:10 UTC
3d69191 Christophe Jaillet 08 May 2018, 05:44:27 UTC iw_cxgb4: Fix an error handling path in 'c4iw_get_dma_mr()' The error handling path of 'c4iw_get_dma_mr()' does not free resources in the correct order. If an error occures, it can leak 'mhp->wr_waitp'. Fixes: a3f12da0e99a ("iw_cxgb4: allocate wait object for each memory object") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:45:19 UTC
4373175 Andrew Boyer 07 May 2018, 17:23:38 UTC RDMA/i40iw: Avoid panic when reading back the IRQ affinity hint The current code sets an affinity hint with a cpumask_t stored on the stack. This value can then be accessed through /proc/irq/*/affinity_hint/, causing a segfault or returning corrupt data. Move the cpumask_t into struct i40iw_msix_vector so it is available later. Backtrace: BUG: unable to handle kernel paging request at ffffb16e600e7c90 IP: irq_affinity_hint_proc_show+0x60/0xf0 PGD 17c0c6d067 PUD 17c0c6e067 PMD 15d4a0e067 PTE 0 Oops: 0000 [#1] SMP Modules linked in: ... CPU: 3 PID: 172543 Comm: grep Tainted: G OE ... #1 Hardware name: ... task: ffff9a5caee08000 task.stack: ffffb16e659d8000 RIP: 0010:irq_affinity_hint_proc_show+0x60/0xf0 RSP: 0018:ffffb16e659dbd20 EFLAGS: 00010086 RAX: 0000000000000246 RBX: ffffb16e659dbd20 RCX: 0000000000000000 RDX: ffffb16e600e7c90 RSI: 0000000000000003 RDI: 0000000000000046 RBP: ffffb16e659dbd88 R08: 0000000000000038 R09: 0000000000000001 R10: 0000000070803079 R11: 0000000000000000 R12: ffff9a59d1d97a00 R13: ffff9a5da47a6cd8 R14: ffff9a5da47a6c00 R15: ffff9a59d1d97a00 FS: 00007f946c31d740(0000) GS:ffff9a5dc1800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffb16e600e7c90 CR3: 00000016a4339000 CR4: 00000000007406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: seq_read+0x12d/0x430 ? sched_clock_cpu+0x11/0xb0 proc_reg_read+0x48/0x70 __vfs_read+0x37/0x140 ? security_file_permission+0xa0/0xc0 vfs_read+0x96/0x140 SyS_read+0x58/0xc0 do_syscall_64+0x5a/0x190 entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:0x7f946bbc97e0 RSP: 002b:00007ffdd0c4ae08 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 000000000096b000 RCX: 00007f946bbc97e0 RDX: 000000000096b000 RSI: 00007f946a2f0000 RDI: 0000000000000004 RBP: 0000000000001000 R08: 00007f946a2ef011 R09: 000000000000000a R10: 0000000000001000 R11: 0000000000000246 R12: 00007f946a2f0000 R13: 0000000000000004 R14: 0000000000000000 R15: 00007f946a2f0000 Code: b9 08 00 00 00 49 89 c6 48 89 df 31 c0 4d 8d ae d8 00 00 00 f3 48 ab 4c 89 ef e8 6c 9a 56 00 49 8b 96 30 01 00 00 48 85 d2 74 3f <48> 8b 0a 48 89 4d 98 48 8b 4a 08 48 89 4d a0 48 8b 4a 10 48 89 RIP: irq_affinity_hint_proc_show+0x60/0xf0 RSP: ffffb16e659dbd20 CR2: ffffb16e600e7c90 Fixes: 8e06af711bf2 ("i40iw: add main, hdr, status") Signed-off-by: Andrew Boyer <andrew.boyer@dell.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:45:19 UTC
9f7b16a Andrew Boyer 07 May 2018, 17:23:37 UTC RDMA/i40iw: Avoid reference leaks when processing the AEQ In this switch there is a reference held on the QP. 'continue' will grab the next event without releasing the reference, causing a leak. Change it to 'break' to drop the reference before grabbing the next event. Fixes: 4e9042e647ff ("i40iw: add hw and utils files") Signed-off-by: Andrew Boyer <andrew.boyer@dell.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:45:18 UTC
a75895b Andrew Boyer 07 May 2018, 17:23:36 UTC RDMA/i40iw: Avoid panic when objects are being created and destroyed A panic occurs when there is a newly-registered element on the QP/CQ MR list waiting to be attached, but a different MR is deregistered. The current code only checks for whether the list is empty, not whether the element being deregistered is actually on the list. Fix the panic by adding a boolean to track if the object is on the list. Fixes: d37498417947 ("i40iw: add files for iwarp interface") Signed-off-by: Andrew Boyer <andrew.boyer@dell.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:45:18 UTC
a0403be oulijun 04 May 2018, 02:57:13 UTC RDMA/hns: Fix the bug with NULL pointer When the last QP of eight QPs is not exist in hns_roce_v1_mr_free_work_fn function, the print for qpn of hr_qp may introduce a calltrace for NULL pointer. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:45:18 UTC
79d4420 oulijun 04 May 2018, 02:57:12 UTC RDMA/hns: Set NULL for __internal_mr This patch mainly configure value for __internal_mr of mr_free_pd. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:45:18 UTC
85e0274 oulijun 04 May 2018, 02:57:11 UTC RDMA/hns: Enable inner_pa_vld filed of mpt When enabled inner_pa_vld field of mpt, The pa0 and pa1 will be valid and the hardware will use it directly and not use base address of pbl. As a result, it can reduce the delay. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:45:18 UTC
90e7a4d oulijun 04 May 2018, 02:57:10 UTC RDMA/hns: Set desc_dma_addr for zero when free cmq desc In order to avoid illegal use for desc_dma_addr of ring, it needs to set it zero when free cmq desc. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:45:18 UTC
778cc5a oulijun 04 May 2018, 02:57:09 UTC RDMA/hns: Fix the bug with rq sge When received multiply rq sge, it should tag the invalid lkey for the last non-zero length sge when have some sges' length are zero. This patch fixes it. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:45:18 UTC
391bd5f oulijun 04 May 2018, 02:57:08 UTC RDMA/hns: Not support qp transition from reset to reset for hip06 Because hip06 hardware is not support for qp transition from reset to reset state, it need to return errno when qp transited from reset to reset. This patch fixes it. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:45:18 UTC
2349fdd oulijun 04 May 2018, 02:57:07 UTC RDMA/hns: Add return operation when configured global param fail When configure global param function run fail, it should directly return and the initial flow will stop. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:45:18 UTC
ad18e20 oulijun 04 May 2018, 02:57:06 UTC RDMA/hns: Update convert function of endian format Because the sys_image_guid of ib_device_attr structure is __be64, it need to use cpu_to_be64 for converting. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:45:18 UTC
f97a62c oulijun 04 May 2018, 02:57:05 UTC RDMA/hns: Load the RoCE dirver automatically To enable the linux-kernel system to load the hns-roce-hw-v2 driver automatically when hns-roce-hw-v2 is plugged in pci bus, it need to create a MODULE_DEVICE_TABLE for expose the pci_table of hns-roce-hw-v2 to user. Signed-off-by: Lijun Ou <oulijun@huawei.com> Reported-by: Zhou Wang <wangzhou1@hisilicon.com> Tested-by: Xiaojun Tan <tanxiaojun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:45:18 UTC
3a39bbe oulijun 04 May 2018, 02:57:04 UTC RDMA/hns: Bugfix for rq record db for kernel When used rq record db for kernel, it needs to set the rdb_en of hr_qp to 1 and configures the dma address of record rq db of qp context. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:45:18 UTC
ecaaf1e oulijun 04 May 2018, 02:57:03 UTC RDMA/hns: Add rq inline flags judgement It needs to set the rqie field of qp context by configured rq inline flags. Besides, it need to decide whether posting inline rqwqe by judged rq inline flags. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:45:18 UTC
1661d3b Alexandru Moise 08 May 2018, 09:02:02 UTC nvmet,rxe: defer ip datagram sending to tasklet This addresses 3 separate problems: 1. When using NVME over Fabrics we may end up sending IP packets in interrupt context, we should defer this work to a tasklet. [ 50.939957] WARNING: CPU: 3 PID: 0 at kernel/softirq.c:161 __local_bh_enable_ip+0x1f/0xa0 [ 50.942602] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G W 4.17.0-rc3-ARCH+ #104 [ 50.945466] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 [ 50.948163] RIP: 0010:__local_bh_enable_ip+0x1f/0xa0 [ 50.949631] RSP: 0018:ffff88009c183900 EFLAGS: 00010006 [ 50.951029] RAX: 0000000080010403 RBX: 0000000000000200 RCX: 0000000000000001 [ 50.952636] RDX: 0000000000000000 RSI: 0000000000000200 RDI: ffffffff817e04ec [ 50.954278] RBP: ffff88009c183910 R08: 0000000000000001 R09: 0000000000000614 [ 50.956000] R10: ffffea00021d5500 R11: 0000000000000001 R12: ffffffff817e04ec [ 50.957779] R13: 0000000000000000 R14: ffff88009566f400 R15: ffff8800956c7000 [ 50.959402] FS: 0000000000000000(0000) GS:ffff88009c180000(0000) knlGS:0000000000000000 [ 50.961552] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 50.963798] CR2: 000055c4ec0ccac0 CR3: 0000000002209001 CR4: 00000000000606e0 [ 50.966121] Call Trace: [ 50.966845] <IRQ> [ 50.967497] __dev_queue_xmit+0x62d/0x690 [ 50.968722] dev_queue_xmit+0x10/0x20 [ 50.969894] neigh_resolve_output+0x173/0x190 [ 50.971244] ip_finish_output2+0x2b8/0x370 [ 50.972527] ip_finish_output+0x1d2/0x220 [ 50.973785] ? ip_finish_output+0x1d2/0x220 [ 50.975010] ip_output+0xd4/0x100 [ 50.975903] ip_local_out+0x3b/0x50 [ 50.976823] rxe_send+0x74/0x120 [ 50.977702] rxe_requester+0xe3b/0x10b0 [ 50.978881] ? ip_local_deliver_finish+0xd1/0xe0 [ 50.980260] rxe_do_task+0x85/0x100 [ 50.981386] rxe_run_task+0x2f/0x40 [ 50.982470] rxe_post_send+0x51a/0x550 [ 50.983591] nvmet_rdma_queue_response+0x10a/0x170 [ 50.985024] __nvmet_req_complete+0x95/0xa0 [ 50.986287] nvmet_req_complete+0x15/0x60 [ 50.987469] nvmet_bio_done+0x2d/0x40 [ 50.988564] bio_endio+0x12c/0x140 [ 50.989654] blk_update_request+0x185/0x2a0 [ 50.990947] blk_mq_end_request+0x1e/0x80 [ 50.991997] nvme_complete_rq+0x1cc/0x1e0 [ 50.993171] nvme_pci_complete_rq+0x117/0x120 [ 50.994355] __blk_mq_complete_request+0x15e/0x180 [ 50.995988] blk_mq_complete_request+0x6f/0xa0 [ 50.997304] nvme_process_cq+0xe0/0x1b0 [ 50.998494] nvme_irq+0x28/0x50 [ 50.999572] __handle_irq_event_percpu+0xa2/0x1c0 [ 51.000986] handle_irq_event_percpu+0x32/0x80 [ 51.002356] handle_irq_event+0x3c/0x60 [ 51.003463] handle_edge_irq+0x1c9/0x200 [ 51.004473] handle_irq+0x23/0x30 [ 51.005363] do_IRQ+0x46/0xd0 [ 51.006182] common_interrupt+0xf/0xf [ 51.007129] </IRQ> 2. Work must always be offloaded to tasklet for rxe_post_send_kernel() when using NVMEoF in order to solve lock ordering between neigh->ha_lock seqlock and the nvme queue lock: [ 77.833783] Possible interrupt unsafe locking scenario: [ 77.833783] [ 77.835831] CPU0 CPU1 [ 77.837129] ---- ---- [ 77.838313] lock(&(&n->ha_lock)->seqcount); [ 77.839550] local_irq_disable(); [ 77.841377] lock(&(&nvmeq->q_lock)->rlock); [ 77.843222] lock(&(&n->ha_lock)->seqcount); [ 77.845178] <Interrupt> [ 77.846298] lock(&(&nvmeq->q_lock)->rlock); [ 77.847986] [ 77.847986] *** DEADLOCK *** 3. Same goes for the lock ordering between sch->q.lock and nvme queue lock: [ 47.634271] Possible interrupt unsafe locking scenario: [ 47.634271] [ 47.636452] CPU0 CPU1 [ 47.637861] ---- ---- [ 47.639285] lock(&(&sch->q.lock)->rlock); [ 47.640654] local_irq_disable(); [ 47.642451] lock(&(&nvmeq->q_lock)->rlock); [ 47.644521] lock(&(&sch->q.lock)->rlock); [ 47.646480] <Interrupt> [ 47.647263] lock(&(&nvmeq->q_lock)->rlock); [ 47.648492] [ 47.648492] *** DEADLOCK *** Using NVMEoF after this patch seems to finally be stable, without it, rxe eventually deadlocks the whole system and causes RCU stalls. Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:39:51 UTC
eeb1af4 Mustafa Ismail 07 May 2018, 17:52:18 UTC i40iw: Use correct address in dst_neigh_lookup for IPv6 Use of incorrect structure address for IPv6 neighbor lookup causes connections to IPv6 addresses to fail. Fix this by using correct address in call to dst_neigh_lookup. Fixes: f27b4746f378 ("i40iw: add connection management code") Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:39:51 UTC
5a7189d Mustafa Ismail 07 May 2018, 17:52:17 UTC i40iw: Fix memory leak in error path of create QP If i40iw_allocate_dma_mem fails when creating a QP, the memory allocated for the QP structure using kzalloc is not freed because iwqp->allocated_buffer is used to free the memory and it is not setup until later. Fix this by setting iwqp->allocated_buffer before allocating the dma memory. Fixes: d37498417947 ("i40iw: add files for iwarp interface") Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:39:50 UTC
37da2a0 Daria Velikovsky 07 May 2018, 07:20:02 UTC RDMA/mlx5: Use proper spec flow label type Flow label is defined as u32 in the in ipv6 flow spec, but used internally in the flow specs parsing as u8. That was causing loss of part of flow_label value. Fixes: 2d1e697e9b716 ('IB/mlx5: Add support to match inner packet fields') Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Daria Velikovsky <daria@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:39:50 UTC
18b0362 Yishai Hadas 07 May 2018, 07:20:01 UTC RDMA/mlx5: Don't assume that medium blueFlame register exists User can leave system without medium BlueFlames registers, however the code assumed that at least one such register exists. This patch fixes that assumption. Fixes: c1be5232d21d ("IB/mlx5: Fix micro UAR allocator") Reported-by: Rohit Zambre <rzambre@uci.edu> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:39:50 UTC
f9e76ca Michael J. Ruhl 02 May 2018, 13:42:51 UTC IB/hfi1: Use after free race condition in send context error path A pio send egress error can occur when the PSM library attempts to to send a bad packet. That issue is still being investigated. The pio error interrupt handler then attempts to progress the recovery of the errored pio send context. Code inspection reveals that the handling lacks the necessary locking if that recovery interleaves with a PSM close of the "context" object contains the pio send context. The lack of the locking can cause the recovery to access the already freed pio send context object and incorrectly deduce that the pio send context is actually a kernel pio send context as shown by the NULL deref stack below: [<ffffffff8143d78c>] _dev_info+0x6c/0x90 [<ffffffffc0613230>] sc_restart+0x70/0x1f0 [hfi1] [<ffffffff816ab124>] ? __schedule+0x424/0x9b0 [<ffffffffc06133c5>] sc_halted+0x15/0x20 [hfi1] [<ffffffff810aa3ba>] process_one_work+0x17a/0x440 [<ffffffff810ab086>] worker_thread+0x126/0x3c0 [<ffffffff810aaf60>] ? manage_workers.isra.24+0x2a0/0x2a0 [<ffffffff810b252f>] kthread+0xcf/0xe0 [<ffffffff810b2460>] ? insert_kthread_work+0x40/0x40 [<ffffffff816b8798>] ret_from_fork+0x58/0x90 [<ffffffff810b2460>] ? insert_kthread_work+0x40/0x40 This is the best case scenario and other scenarios can corrupt the already freed memory. Fix by adding the necessary locking in the pio send context error handler. Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 14:39:50 UTC
27f7062 Leon Romanovsky 03 May 2018, 18:37:46 UTC MAINTAINERS: Remove bouncing @mellanox.com addresses Delete non-existent @mellanox.com addresses from MAINTAINERS file. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 12:53:00 UTC
9533b29 Greg Thelen 04 May 2018, 03:29:19 UTC IB: remove redundant INFINIBAND kconfig dependencies INFINIBAND_ADDR_TRANS depends on INFINIBAND. So there's no need for options which depend INFINIBAND_ADDR_TRANS to also depend on INFINIBAND. Remove the unnecessary INFINIBAND depends. Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 May 2018, 12:51:03 UTC
9aa1692 Parav Pandit 02 May 2018, 10:18:59 UTC RDMA/cma: Do not query GID during QP state transition to RTR When commit [1] was added, SGID was queried to derive the SMAC address. Then, later on during a refactor [2], SMAC was no longer needed. However, the now useless GID query remained. Then during additional code changes later on, the GID query was being done in such a way that it caused iWARP queries to start breaking. Remove the useless GID query and resolve the iWARP breakage at the same time. This is discussed in [3]. [1] commit dd5f03beb4f7 ("IB/core: Ethernet L2 attributes in verbs/cm structures") [2] commit 5c266b2304fb ("IB/cm: Remove the usage of smac and vid of qp_attr and cm_av") [3] https://www.spinics.net/lists/linux-rdma/msg63951.html Suggested-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 03 May 2018, 19:45:18 UTC
b03bcde Jack Morgenstein 02 May 2018, 10:04:25 UTC IB/mlx4: Fix integer overflow when calculating optimal MTT size When the kernel was compiled using the UBSAN option, we saw the following stack trace: [ 1184.827917] UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx4/mr.c:349:27 [ 1184.828114] signed integer overflow: [ 1184.828247] -2147483648 - 1 cannot be represented in type 'int' The problem was caused by calling round_up in procedure mlx4_ib_umem_calc_optimal_mtt_size (on line 349, as noted in the stack trace) with the second parameter (1 << block_shift) (which is an int). The second parameter should have been (1ULL << block_shift) (which is an unsigned long long). (1 << block_shift) is treated by the compiler as an int (because 1 is an integer). Now, local variable block_shift is initialized to 31. If block_shift is 31, 1 << block_shift is 1 << 31 = 0x80000000=-214748368. This is the most negative int value. Inside the round_up macro, there is a cast applied to ((1 << 31) - 1). However, this cast is applied AFTER ((1 << 31) - 1) is calculated. Since (1 << 31) is treated as an int, we get the negative overflow identified by UBSAN in the process of calculating ((1 << 31) - 1). The fix is to change (1 << block_shift) to (1ULL << block_shift) on line 349. Fixes: 9901abf58368 ("IB/mlx4: Use optimal numbers of MTT entries") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 03 May 2018, 19:31:43 UTC
59482a1 Sebastian Sanchez 01 May 2018, 12:36:13 UTC IB/hfi1: Fix memory leak in exception path in get_irq_affinity() When IRQ affinity is set and the interrupt type is unknown, a cpu mask allocated within the function is never freed. Fix this memory leak by allocating memory within the scope where it is used. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 03 May 2018, 19:24:48 UTC
e9777ad Sebastian Sanchez 01 May 2018, 12:36:06 UTC IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failure When allocating device data, if there's an allocation failure, the already allocated memory won't be freed such as per-cpu counters. Fix memory leaks in exception path by creating a common reentrant clean up function hfi1_clean_devdata() to be used at driver unload time and device data allocation failure. To accomplish this, free_platform_config() and clean_up_i2c() are changed to be reentrant to remove dependencies when they are called in different order. This helps avoid NULL pointer dereferences introduced by this patch if those two functions weren't reentrant. In addition, set dd->int_counter, dd->rcv_limit, dd->send_schedule and dd->tx_opstats to NULL after they're freed in hfi1_clean_devdata(), so that hfi1_clean_devdata() is fully reentrant. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 03 May 2018, 19:24:48 UTC
45d9245 Sebastian Sanchez 01 May 2018, 12:35:58 UTC IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used When an invalid num_vls is used as a module parameter, the code execution follows an exception path where the macro dd_dev_err() expects dd->pcidev->dev not to be NULL in hfi1_init_dd(). This causes a NULL pointer dereference. Fix hfi1_init_dd() by initializing dd->pcidev and dd->pcidev->dev earlier in the code. If a dd exists, then dd->pcidev and dd->pcidev->dev always exists. BUG: unable to handle kernel NULL pointer dereference at 00000000000000f0 IP: __dev_printk+0x15/0x90 Workqueue: events work_for_cpu_fn RIP: 0010:__dev_printk+0x15/0x90 Call Trace: dev_err+0x6c/0x90 ? hfi1_init_pportdata+0x38d/0x3f0 [hfi1] hfi1_init_dd+0xdd/0x2530 [hfi1] ? pci_conf1_read+0xb2/0xf0 ? pci_read_config_word.part.9+0x64/0x80 ? pci_conf1_write+0xb0/0xf0 ? pcie_capability_clear_and_set_word+0x57/0x80 init_one+0x141/0x490 [hfi1] local_pci_probe+0x3f/0xa0 work_for_cpu_fn+0x10/0x20 process_one_work+0x152/0x350 worker_thread+0x1cf/0x3e0 kthread+0xf5/0x130 ? max_active_store+0x80/0x80 ? kthread_bind+0x10/0x10 ? do_syscall_64+0x6e/0x1a0 ? SyS_exit_group+0x10/0x10 ret_from_fork+0x35/0x40 Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 03 May 2018, 19:24:47 UTC
0a0bcb0 Mike Marciniszyn 01 May 2018, 12:35:51 UTC IB/hfi1: Fix loss of BECN with AHG AHG may be armed to use the stored header, which by design is limited to edits in the PSN/A 32 bit word (bth2). When the code is trying to send a BECN, the use of the stored header will lose the BECN bit. Fix by avoiding AHG when getting ready to send a BECN. This is accomplished by always claiming the packet is not a middle packet which is an AHG precursor. BECNs are not a normal case and this should not hurt AHG optimizations. Cc: <stable@vger.kernel.org> # 4.14.x Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 03 May 2018, 19:24:47 UTC
5da9e74 Michael J. Ruhl 01 May 2018, 12:35:43 UTC IB/hfi1 Use correct type for num_user_context The module parameter num_user_context is defined as 'int' and defaults to -1. The module_param_named() says that it is uint. Correct module_param_named() type information and update the modinfo text to reflect the default value. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 03 May 2018, 19:24:47 UTC
f59fb9e Mike Marciniszyn 01 May 2018, 12:35:36 UTC IB/hfi1: Fix handling of FECN marked multicast packet The code for handling a marked UD packet unconditionally returns the dlid in the header of the FECN marked packet. This is not correct for multicast packets where the DLID is in the multicast range. The subsequent attempt to send the CNP with the multicast lid will cause the chip to halt the ack send context because the source lid doesn't match the chip programming. The send context will be halted and flush any other pending packets in the pio ring causing the CNP to not be sent. A part of investigating the fix, it was determined that the 16B work broke the FECN routine badly with inconsistent use of 16 bit and 32 bits types for lids and pkeys. Since the port's source lid was correctly 32 bits the type mixmatches need to be dealt with at the same time as fixing the CNP header issue. Fix these issues by: - Using the ports lid for as the SLID for responding to FECN marked UD packets - Insure pkey is always 16 bit in this and subordinate routines - Insure lids are 32 bits in this and subordinate routines Cc: <stable@vger.kernel.org> # 4.14.x Fixes: 88733e3b8450 ("IB/hfi1: Add 16B UD support") Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 03 May 2018, 19:24:44 UTC
db82476 Håkon Bugge 18 April 2018, 14:24:50 UTC IB/core: Make ib_mad_client_id atomic Currently, the kernel protects access to the agent ID allocator on a per port basis using a spinlock, so it is impossible for two apps/threads on the same port to get the same TID, but it is entirely possible for two threads on different ports to end up with the same TID. As this can be confusing (regardless of it being legal according to the IB Spec 1.3, C13-18.1.1, in section 13.4.6.4 - TransactionID usage), and as the rdma-core user space API for /dev/umad devices implies unique TIDs even across ports, make the TID an atomic type so that no two allocations, regardless of port number, will be the same. Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 30 April 2018, 17:07:28 UTC
2df19e1 Bharat Potnuri 27 April 2018, 11:11:16 UTC iw_cxgb4: Atomically flush per QP HW CQEs When a CQ is shared by multiple QPs, c4iw_flush_hw_cq() needs to acquire corresponding QP lock before moving the CQEs into its corresponding SW queue and accessing the SQ contents for completing a WR. Ignore CQEs if corresponding QP is already flushed. Cc: stable@vger.kernel.org Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:38:44 UTC
54e7e48 Ariel Levkovich 26 April 2018, 12:42:55 UTC IB/uverbs: Fix kernel crash during MR deregistration flow This patch fixes a crash that happens due to access to an uninitialized DM pointer within the MR object. The change makes sure the DM pointer in the MR object is set to NULL during a non-DM MR creation to prevent a false indication that this MR is related to a DM in the dereg flow. Fixes: be934cca9e98 ("IB/uverbs: Add device memory registration ioctl support") Reported-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:22:24 UTC
5ccbf63 Ariel Levkovich 26 April 2018, 12:42:54 UTC IB/uverbs: Prevent reregistration of DM_MR to regular MR This patch adds a check in the ib_uverbs_rereg_mr flow to make sure there's no attempt to rereg a device memory MR to regular MR. In such case the command will fail with -EINVAL status. fixes: be934cca9e98 ("IB/uverbs: Add device memory registration ioctl support") Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:22:24 UTC
4f9ca2d Leon Romanovsky 26 April 2018, 12:37:48 UTC RDMA/mlx4: Add missed RSS hash inner header flag Despite being advertised to user space application, the RSS inner header flag was filtered by checks at the beginning of QP creation routine. Cc: <stable@vger.kernel.org> # 4.15 Fixes: 4d02ebd9bbbd ("IB/mlx4: Fix RSS hash fields restrictions") Fixes: 07d84f7b6adf ("IB/mlx4: Add support to RSS hash for inner headers") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:22:23 UTC
ab17884 oulijun 26 April 2018, 06:46:24 UTC RDMA/hns: Fix a couple misspellings This patch fixes two spelling errors. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:21:51 UTC
137ae32 oulijun 26 April 2018, 06:46:23 UTC RDMA/hns: Submit bad wr When generated bad work reqeust, it needs to report to user. This patch mainly fixes it. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:20:48 UTC
634f639 oulijun 26 April 2018, 06:46:22 UTC RDMA/hns: Update assignment method for owner field of send wqe When posting a work reqeust, it need to update the owner bit of send wqe. This patch mainly fix the bug when posting multiply work request. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:20:47 UTC
ae25db0 oulijun 26 April 2018, 06:46:21 UTC RDMA/hns: Adjust the order of cleanup hem table This patch update the order of cleaning hem table for trrl_table and irrl_table as well as mtt_cqe_table and mtt_table. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:20:47 UTC
b6dd9b3 oulijun 26 April 2018, 06:46:20 UTC RDMA/hns: Only assign dqpn if IB_QP_PATH_DEST_QPN bit is set Only when the IB_QP_PATH_DEST_QPN flag of attr_mask is set is it valid to assign the dqpn field of qp context Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:20:47 UTC
734f386 oulijun 26 April 2018, 06:46:19 UTC RDMA/hns: Remove some unnecessary attr_mask judgement This patch deletes some unnecessary attr_mask if condition in hip08 according to the IB protocol. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:20:47 UTC
6852af8 oulijun 26 April 2018, 06:46:18 UTC RDMA/hns: Only assign mtu if IB_QP_PATH_MTU bit is set Only when the IB_QP_PATH_MTU flag of attr_mask is set it is valid to assign the mtu field of qp context when qp type is not GSI and UD. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:20:47 UTC
6e1a709 oulijun 26 April 2018, 06:46:17 UTC RDMA/hns: Fix the qp context state diagram According to RoCE protocol, it is possible to transition from error to error state for modifying qp in hip08. This patch fix it. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:20:47 UTC
328d405 oulijun 26 April 2018, 06:46:16 UTC RDMA/hns: Intercept illegal RDMA operation when use inline data RDMA read operation is not supported inline data. If user cofigures issue a RDMA read and use inline data, it will happen a hardware error. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:20:47 UTC
215a8c0 oulijun 26 April 2018, 06:46:15 UTC RDMA/hns: Bugfix for init hem table During init hem table, type should be used instead of table->type which is finally initializaed with type. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:20:47 UTC
9fd4350 Zhu Yanjun 26 April 2018, 04:41:10 UTC IB/rxe: avoid double kfree_skb When skb is sent, it will pass the following functions in soft roce. rxe_send [rdma_rxe] ip_local_out __ip_local_out ip_output ip_finish_output ip_finish_output2 dev_queue_xmit __dev_queue_xmit dev_hard_start_xmit In the above functions, if error occurs in the above functions or iptables rules drop skb after ip_local_out, kfree_skb will be called. So it is not necessary to call kfree_skb in soft roce module again. Or else crash will occur. The steps to reproduce: server client --------- --------- |1.1.1.1|<----rxe-channel--->|1.1.1.2| --------- --------- On server: rping -s -a 1.1.1.1 -v -C 10000 -S 512 On client: rping -c -a 1.1.1.1 -v -C 10000 -S 512 The kernel configs CONFIG_DEBUG_KMEMLEAK and CONFIG_DEBUG_OBJECTS are enabled on both server and client. When rping runs, run the following command in server: iptables -I OUTPUT -p udp --dport 4791 -j DROP Without this patch, crash will occur. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:20:47 UTC
2da36d4 Jianchao Wang 26 April 2018, 03:52:39 UTC IB/rxe: add RXE_START_MASK for rxe_opcode IB_OPCODE_RC_SEND_ONLY_INV w/o RXE_START_MASK, the last_psn of IB_OPCODE_RC_SEND_ONLY_INV will not be updated in update_wqe_psn, and the corresponding wqe will not be acked in rxe_completer due to its last_psn is zero. Finally, the other wqe will also not be able to be acked, because the wqe of IB_OPCODE_RC_SEND_ONLY_INV with last_psn 0 is still there. This causes large amount of io timeout when nvmeof is over rxe. Add RXE_START_MASK for IB_OPCODE_RC_SEND_ONLY_INV to fix this. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:20:47 UTC
f96416c Colin Ian King 25 April 2018, 16:24:04 UTC RDMA/iwpm: fix memory leak on map_info In the cases where iwpm_hash_bucket is NULL and where function get_mapinfo_hash_bucket returns NULL then the map_info is never added to hash_bucket_head and hence there is a leak of map_info. Fix this by nullifying hash_bucket_head and if that is null we know that that map_info was not added to hash_bucket_head and hence map_info should be free'd. Detected by CoverityScan, CID#1222481 ("Resource Leak") Fixes: 30dc5e63d6a5 ("RDMA/core: Add support for iWARP Port Mapper user space service") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:20:47 UTC
47a3968 Luc Van Oostenryck 24 April 2018, 13:15:47 UTC IB/ipoib: fix ipoib_start_xmit()'s return type The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:07:30 UTC
c192a12 Luc Van Oostenryck 24 April 2018, 13:15:45 UTC IB/nes: fix nes_netdev_start_xmit()'s return type The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 18:07:30 UTC
2918c1a Parav Pandit 24 April 2018, 17:13:45 UTC RDMA/cma: Fix use after destroy access to net namespace for IPoIB There are few issues with validation of netdevice and listen id lookup for IB (IPoIB) while processing incoming CM request as below. 1. While performing lookup of bind_list in cma_ps_find(), net namespace of the netdevice can get deleted in cma_exit_net(), resulting in use after free access of idr and/or net namespace structures. This lookup occurs from the workqueue context (and not userspace context where net namespace is always valid). CPU0 CPU1 ==== ==== bind_list = cma_ps_find(); move netdevice to new namespace delete net namespace cma_exit_net() idr_destroy(idr); [..] cma_find_listener(bind_list, ..); 2. While netdevice is validated for IP address in given net namespace, netdevice's net namespace and/or ifindex can change in cma_get_net_dev() and cma_match_net_dev(). Above issues are overcome by using rcu lock along with netdevice UP/DOWN state as described below. When a net namespace is getting deleted, netdevice is closed and shutdown before moving it back to init_net namespace. change_net_namespace() synchronizes with any existing use of netdevice before changing the netdev properties such as net or ifindex. Once netdevice IFF_UP flags is cleared, such fields are not guaranteed to be valid. Therefore, rcu lock along with netdevice state check ensures that, while route lookup and cm_id lookup is in progress, netdevice of interest won't migrate to any other net namespace. This ensures that associated net namespace of netdevice won't get deleted while rcu lock is held for netdevice which is in IFF_UP state. Fixes: fa20105e09e9 ("IB/cma: Add support for network namespaces") Fixes: 4be74b42a6d0 ("IB/cma: Separate port allocation to network namespaces") Fixes: f887f2ac87c2 ("IB/cma: Validate routing of incoming requests") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 17:57:26 UTC
f604db6 Matan Barak 24 April 2018, 08:15:20 UTC IB/uverbs: Fix validating mandatory attributes Previously, if a method contained mandatory attributes in a namespace that wasn't given by the user, these attributes weren't validated. Fixing this by iterating over all specification namespaces. Fixes: fac9658cabb9 ("IB/core: Add new ioctl interface") Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 17:53:41 UTC
26bff1b Raju Rangoju 23 April 2018, 16:12:37 UTC RDMA/cxgb4: release hw resources on device removal The c4iw_rdev_close() logic was not releasing all the hw resources (PBL and RQT memory) during the device removal event (driver unload / system reboot). This can cause panic in gen_pool_destroy(). The module remove function will wait for all the hw resources to be released during the device removal event. Fixes c12a67fe(iw_cxgb4: free EQ queue memory on last deref) Signed-off-by: Raju Rangoju <rajur@chelsio.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Cc: stable@vger.kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 17:52:31 UTC
f7cb7b8 Greg Thelen 26 April 2018, 18:19:35 UTC IB: make INFINIBAND_ADDR_TRANS configurable Allow INFINIBAND without INFINIBAND_ADDR_TRANS because fuzzing has been finding fair number of CM bugs. So provide option to disable it. Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Tarick Bedeir <tarick@google.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 15:15:44 UTC
5a3bc8a Greg Thelen 26 April 2018, 18:19:34 UTC ib_srp: depend on INFINIBAND_ADDR_TRANS INFINIBAND_SRP code depends on INFINIBAND_ADDR_TRANS provided symbols. So declare the kconfig dependency. This is necessary to allow for enabling INFINIBAND without INFINIBAND_ADDR_TRANS. Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Tarick Bedeir <tarick@google.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 15:15:44 UTC
3c6b03d Greg Thelen 26 April 2018, 18:19:33 UTC cifs: smbd: depend on INFINIBAND_ADDR_TRANS CIFS_SMB_DIRECT code depends on INFINIBAND_ADDR_TRANS provided symbols. So declare the kconfig dependency. This is necessary to allow for enabling INFINIBAND without INFINIBAND_ADDR_TRANS. Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Tarick Bedeir <tarick@google.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 15:15:44 UTC
346a47b Greg Thelen 26 April 2018, 18:19:32 UTC ib_srpt: depend on INFINIBAND_ADDR_TRANS INFINIBAND_SRPT code depends on INFINIBAND_ADDR_TRANS provided symbols. So declare the kconfig dependency. This is necessary to allow for enabling INFINIBAND without INFINIBAND_ADDR_TRANS. Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Tarick Bedeir <tarick@google.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 15:15:43 UTC
d6fc6a2 Greg Thelen 26 April 2018, 18:19:31 UTC nvmet-rdma: depend on INFINIBAND_ADDR_TRANS NVME_TARGET_RDMA code depends on INFINIBAND_ADDR_TRANS provided symbols. So declare the kconfig dependency. This is necessary to allow for enabling INFINIBAND without INFINIBAND_ADDR_TRANS. Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Tarick Bedeir <tarick@google.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 15:15:43 UTC
3af7a15 Greg Thelen 26 April 2018, 18:19:30 UTC nvme: depend on INFINIBAND_ADDR_TRANS NVME_RDMA code depends on INFINIBAND_ADDR_TRANS provided symbols. So declare the kconfig dependency. This is necessary to allow for enabling INFINIBAND without INFINIBAND_ADDR_TRANS. Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Tarick Bedeir <tarick@google.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 15:15:43 UTC
444261c Leon Romanovsky 23 April 2018, 14:01:56 UTC RDMA/mlx5: Properly check return value of mlx5_get_uars_page Starting from commit 72f36be06138 ("net/mlx5: Fix mlx5_get_uars_page to return error code") the mlx5_get_uars_page() call returns error in case of failure, but it was mistakenly overlooked in the merge commit. Fixes: e7996a9a77fc ("Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git") Reported-by: Alaa Hleihel <alaa@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 15:03:15 UTC
84a6a7a Parav Pandit 23 April 2018, 14:01:55 UTC IB/mlx5: Fix represent correct netdevice in dual port RoCE In commit bcf87f1dbbec ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode") incorrectly mapped primary device's netdevice to 2nd port netdevice. It always represented primary port's netdevice for 2nd port netdevice when ib representors were not used. This results into failing to process CM request arriving on 2nd port due to incorrect mapping of netdevice. This fix corrects it by considering the right mdev. Cc: <stable@vger.kernel.org> # 4.16 Fixes: bcf87f1dbbec ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode") Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 15:03:15 UTC
4f32ac2 Danit Goldberg 23 April 2018, 14:01:54 UTC IB/mlx5: Use unlimited rate when static rate is not supported Before the change, if the user passed a static rate value different than zero and the FW doesn't support static rate, it would end up configuring rate of 2.5 GBps. Fix this by using rate 0; unlimited, in cases where FW doesn't support static rate configuration. Cc: <stable@vger.kernel.org> # 3.10 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Danit Goldberg <danitg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 15:03:15 UTC
002bf22 Leon Romanovsky 23 April 2018, 14:01:53 UTC RDMA/mlx5: Protect from shift operand overflow Ensure that user didn't supply values too large that can cause overflow. UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/qp.c:263:23 shift exponent -2147483648 is negative CPU: 0 PID: 292 Comm: syzkaller612609 Not tainted 4.16.0-rc1+ #131 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ubsan_epilogue+0xe/0x81 set_rq_size+0x7c2/0xa90 create_qp_common+0xc18/0x43c0 mlx5_ib_create_qp+0x379/0x1ca0 create_qp.isra.5+0xc94/0x2260 ib_uverbs_create_qp+0x21b/0x2a0 ib_uverbs_write+0xc2c/0x1010 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 do_syscall_64+0x1aa/0x740 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x433569 RSP: 002b:00007ffc6e62f448 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433569 RDX: 0000000000000070 RSI: 00000000200042c0 RDI: 0000000000000003 RBP: 00000000006d5018 R08: 00000000004002f8 R09: 00000000004002f8 R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000 R13: 000000000040c9f0 R14: 000000000040ca80 R15: 0000000000000006 Cc: <stable@vger.kernel.org> # 3.10 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: syzkaller <syzkaller@googlegroups.com> Reported-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 15:03:15 UTC
b4bd701 Leon Romanovsky 23 April 2018, 14:01:52 UTC RDMA/mlx5: Fix multiple NULL-ptr deref errors in rereg_mr flow Failure in rereg MR releases UMEM but leaves the MR to be destroyed by the user. As a result the following scenario may happen: "create MR -> rereg MR with failure -> call to rereg MR again" and hit "NULL-ptr deref or user memory access" errors. Ensure that rereg MR is only performed on a non-dead MR. Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 4.5 Fixes: 395a8e4c32ea ("IB/mlx5: Refactoring register MR code") Reported-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 27 April 2018, 15:03:15 UTC
dc5640f Parav Pandit 23 April 2018, 13:58:19 UTC IB/core: Fix deleting default GIDs when changing mac adddress Before [1], When MAC address of the netdevice is changed, default GID is supposed to get deleted and added back which affects the node and/or port GUID in below sequence. netdevice_event() -> NETDEV_CHANGEADDR default_del_cmd() del_netdev_default_ips() bond_delete_netdev_default_gids() ib_cache_gid_set_default_gid() ib_cache_gid_del() add_cmd() [..] However, ib_cache_gid_del() was not getting invoked in non bonding scenarios because event_ndev and rdma_ndev are same. Therefore, fix such condition to ignore checking upper device when event ndev and rdma_dev are same; similar to bond_set_netdev_default_gids(). Which this fix ib_cache_gid_del() is invoked correctly; however ib_cache_gid_del() doesn't find the default GID for deletion because find_gid() was given default_gid = false with GID_ATTR_FIND_MASK_DEFAULT set. But it was getting overwritten by ib_cache_gid_set_default_gid() later on as part of add_cmd(). Therefore, mac address change used to work for default GID. With refactor series [1], this incorrect behavior is detected. Therefore, when deleting default GID, set default_gid and set MASK flag. when deleting IP based GID, clear default_gid and set MASK flag. [1] https://patchwork.kernel.org/patch/10319151/ Fixes: 238fdf48f2b5 ("IB/core: Add RoCE table bonding support") Fixes: 598ff6bae689 ("IB/core: Refactor GID modify code for RoCE") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 23 April 2018, 21:28:18 UTC
22c01ee Parav Pandit 23 April 2018, 13:58:18 UTC IB/core: Fix to avoid deleting IPv6 look alike default GIDs When IPv6 link local address is removed, if it matches with the default GID, default GID(s)s gets removed which may not be a desired behavior. This behavior is introduced by refactor work in Fixes tag. When IPv6 link address is removed, removing its equivalent RoCEv2 GID which exactly matches with default RoCEv2 GID, is right thing to do. However achieving it correctly requires lot more changes, likely in roce_gid_mgmt.c and core/cache.c. This should be done as independent patch. Therefore, this patch preserves behavior of not deleteing default GIDs. This is done by providing explicit hint to consider default GID property using mask and default_gid; similar to add_gid(). Fixes: 598ff6bae68 ("IB/core: Refactor GID modify code for RoCE") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 23 April 2018, 21:28:18 UTC
a66ed14 Parav Pandit 23 April 2018, 13:58:17 UTC IB/core: Don't allow default GID addition at non reseved slots Default GIDs are marked reserved at the start of the GID table at index 0 and 1 by gid_table_reserve_default(). Currently when default GID is requested, it can still allocates an empty slot which was not marked as RESERVED for default GID, which is incorrect. At least in current code flow of roce_gid_mgmt.c, in theory we can still request to allocate more than one/two default GIDs depending on how upper devices are setup. Therefore, it is better for cache layer to only allow our reserved slots to be used by default GID allocation requests. Fixes: 598ff6bae689 ("IB/core: Refactor GID modify code for RoCE") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 23 April 2018, 21:26:04 UTC
d50e14a Jason Gunthorpe 20 April 2018, 15:49:10 UTC uapi: Fix SPDX tags for files referring to the 'OpenIB.org' license Based on discussion with Kate Stewart this license is not a BSD-2-Clause, but is now formally identified as Linux-OpenIB by SPDX. The key difference between the licenses is in the 'warranty' paragraph. if_infiniband.h refers to the 'OpenIB.org' license, but does not include the text, instead it links to an obsolete web site that contains a license that matches the BSD-2-Clause SPX. There is no 'three clause' version of the OpenIB.org license. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Doug Ledford <dledford@redhat.com> 23 April 2018, 15:10:33 UTC
09abfe7 Roland Dreier 19 April 2018, 15:28:11 UTC RDMA/ucma: Allow resolving address w/o specifying source address The RDMA CM will select a source device and address by consulting the routing table if no source address is passed into rdma_resolve_address(). Userspace will ask for this by passing an all-zero source address in the RESOLVE_IP command. Unfortunately the new check for non-zero address size rejects this with EINVAL, which breaks valid userspace applications. Fix this by explicitly allowing a zero address family for the source. Fixes: 2975d5de6428 ("RDMA/ucma: Check AF family prior resolving address") Cc: <stable@vger.kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 23 April 2018, 15:04:05 UTC
8b77586 Jason Gunthorpe 05 April 2018, 03:00:01 UTC RDMA/ucma: Check for a cm_id->device in all user calls that need it This is done by auditing all callers of ucma_get_ctx and switching the ones that unconditionally touch ->device to ucma_get_ctx_dev. This covers a little less than half of the call sites. The 11 remaining call sites to ucma_get_ctx() were manually audited. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 20 April 2018, 02:01:11 UTC
e33514f Geert Uytterhoeven 09 April 2018, 14:52:47 UTC IB/uverbs: Add missing braces in anonymous union initializers With gcc-4.1.2: drivers/infiniband/core/uverbs_std_types_flow_action.c:366: error: unknown field ‘ptr’ specified in initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:367: error: unknown field ‘type’ specified in initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:367: warning: missing braces around initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:367: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>.<anonymous>’) drivers/infiniband/core/uverbs_std_types_flow_action.c:368: error: unknown field ‘min_len’ specified in initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: excess elements in union initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’) drivers/infiniband/core/uverbs_std_types_flow_action.c:368: error: unknown field ‘len’ specified in initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: excess elements in union initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’) drivers/infiniband/core/uverbs_std_types_flow_action.c:369: error: unknown field ‘flags’ specified in initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:369: warning: excess elements in union initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:369: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’) drivers/infiniband/core/uverbs_std_types_flow_action.c:376: error: unknown field ‘ptr’ specified in initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:377: error: unknown field ‘type’ specified in initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:377: warning: missing braces around initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:377: warning: (near initialization for ‘uverbs_flow_action_esp_replay[0].<anonymous>.<anonymous>’) drivers/infiniband/core/uverbs_std_types_flow_action.c:379: error: unknown field ‘len’ specified in initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:379: warning: excess elements in union initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:379: warning: (near initialization for ‘uverbs_flow_action_esp_replay[0].<anonymous>’) drivers/infiniband/core/uverbs_std_types_flow_action.c:383: error: unknown field ‘ptr’ specified in initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:384: error: unknown field ‘type’ specified in initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:385: error: unknown field ‘min_len’ specified in initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: excess elements in union initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’) drivers/infiniband/core/uverbs_std_types_flow_action.c:385: error: unknown field ‘len’ specified in initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: excess elements in union initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’) drivers/infiniband/core/uverbs_std_types_flow_action.c:386: error: unknown field ‘flags’ specified in initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:386: warning: excess elements in union initializer drivers/infiniband/core/uverbs_std_types_flow_action.c:386: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’) Add the missing braces to fix this. Fixes: 2eb9beaee5d7 ("IB/uverbs: Add flow_action create and destroy verbs") Fixes: 7d12f8d5a164 ("IB/uverbs: Add modify ESP flow_action") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> 18 April 2018, 02:14:15 UTC
b3fe6c6 Randy Dunlap 17 April 2018, 01:51:50 UTC infiniband: mlx5: fix build errors when INFINIBAND_USER_ACCESS=m Fix build errors when INFINIBAND_USER_ACCESS=m and MLX5_INFINIBAND=y. The build error occurs when the mlx5 driver code attempts to use USER_ACCESS interfaces, which are built as a loadable module. Fixes these build errors: drivers/infiniband/hw/mlx5/main.o: In function `populate_specs_root': ../drivers/infiniband/hw/mlx5/main.c:4982: undefined reference to `uverbs_default_get_objects' ../drivers/infiniband/hw/mlx5/main.c:4994: undefined reference to `uverbs_alloc_spec_tree' drivers/infiniband/hw/mlx5/main.o: In function `depopulate_specs_root': ../drivers/infiniband/hw/mlx5/main.c:5001: undefined reference to `uverbs_free_spec_tree' Build-tested with multiple config combinations. Fixes: 8c84660bb437 ("IB/mlx5: Initialize the parsing tree root without the help of uverbs") Cc: stable@vger.kernel.org # reported against 4.16 Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> 18 April 2018, 01:26:43 UTC
25d0e2d Zhu Yanjun 15 April 2018, 01:16:54 UTC IB/mlx5: remove duplicate header file The header file fs_helpers.h is included twice. So it should be removed. Fixes: 802c2125689d ("IB/mlx5: Add IPsec support for egress and ingress") CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> 16 April 2018, 22:23:02 UTC
ef95a90 Shamir Rabinovitch 10 April 2018, 14:26:23 UTC RDMA/ucma: ucma_context reference leak in error path Validating input parameters should be done before getting the cm_id otherwise it can leak a cm_id reference. Fixes: 6a21dfc0d0db ("RDMA/ucma: Limit possible option size") Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> 16 April 2018, 15:49:24 UTC
60cc43f Linus Torvalds 16 April 2018, 01:24:20 UTC Linux 4.17-rc1 16 April 2018, 01:24:20 UTC
e37563b Linus Torvalds 16 April 2018, 01:08:35 UTC Merge tag 'for-4.17-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull more btrfs updates from David Sterba: "We have queued a few more fixes (error handling, log replay, softlockup) and the rest is SPDX updates that touche almost all files so the diffstat is long" * tag 'for-4.17-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: Only check first key for committed tree blocks btrfs: add SPDX header to Kconfig btrfs: replace GPL boilerplate by SPDX -- sources btrfs: replace GPL boilerplate by SPDX -- headers Btrfs: fix loss of prealloc extents past i_size after fsync log replay Btrfs: clean up resources during umount after trans is aborted btrfs: Fix possible softlock on single core machines Btrfs: bail out on error during replay_dir_deletes Btrfs: fix NULL pointer dereference in log_dir_items 16 April 2018, 01:08:35 UTC
09c9b0e Linus Torvalds 16 April 2018, 01:06:22 UTC Merge tag '4.17-rc1SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "SMB3 fixes, a few for stable, and some important cleanup work from Ronnie of the smb3 transport code" * tag '4.17-rc1SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: change validate_buf to validate_iov cifs: remove rfc1002 hardcoded constants from cifs_discard_remaining_data() cifs: Change SMB2_open to return an iov for the error parameter cifs: add resp_buf_size to the mid_q_entry structure smb3.11: replace a 4 with server->vals->header_preamble_size cifs: replace a 4 with server->vals->header_preamble_size cifs: add pdu_size to the TCP_Server_Info structure SMB311: Improve checking of negotiate security contexts SMB3: Fix length checking of SMB3.11 negotiate request CIFS: add ONCE flag for cifs_dbg type cifs: Use ULL suffix for 64-bit constant SMB3: Log at least once if tree connect fails during reconnect cifs: smb2pdu: Fix potential NULL pointer dereference 16 April 2018, 01:06:22 UTC
f0d98d8 Linus Torvalds 16 April 2018, 00:24:12 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of minor (and safe changes) that didn't make the initial pull request plus some bug fixes. The status handling code is actually a running regression from the previous merge window which had an incomplete fix (now reverted) and most of the remaining bug fixes are for problems older than the current merge window" [ Side note: this merge also takes the base kernel git repository to 6+ million objects for the first time. Technically we hit it a couple of merges ago already if you count all the tag objects, but now it reaches 6M+ objects reachable from HEAD. I was joking around that that's when I should switch to 5.0, because 3.0 happened at the 2M mark, and 4.0 happened at 4M objects. But probably not, even if numerology is about as good a reason as any. - Linus ] * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: devinfo: Add Microsoft iSCSI target to 1024 sector blacklist scsi: cxgb4i: silence overflow warning in t4_uld_rx_handler() scsi: dpt_i2o: Use after free in I2ORESETCMD ioctl scsi: core: Make scsi_result_to_blk_status() recognize CONDITION MET scsi: core: Rename __scsi_error_from_host_byte() into scsi_result_to_blk_status() Revert "scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()" scsi: aacraid: Insure command thread is not recursively stopped scsi: qla2xxx: Correct setting of SAM_STAT_CHECK_CONDITION scsi: qla2xxx: correctly shift host byte scsi: qla2xxx: Fix race condition between iocb timeout and initialisation scsi: qla2xxx: Avoid double completion of abort command scsi: qla2xxx: Fix small memory leak in qla2x00_probe_one on probe failure scsi: scsi_dh: Don't look for NULL devices handlers by name scsi: core: remove redundant assignment to shost->use_blk_mq 16 April 2018, 00:24:12 UTC
ca71b3b Linus Torvalds 16 April 2018, 00:21:30 UTC Merge tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - pass HOSTLDFLAGS when compiling single .c host programs - build genksyms lexer and parser files instead of using shipped versions - rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency - let the top .gitignore globally ignore artifacts generated by flex, bison, and asn1_compiler - let the top Makefile globally clean artifacts generated by flex, bison, and asn1_compiler - use safer .SECONDARY marker instead of .PRECIOUS to prevent intermediate files from being removed - support -fmacro-prefix-map option to make __FILE__ a relative path - fix # escaping to prepare for the future GNU Make release - clean up deb-pkg by using debian tools instead of handrolled source/changes generation - improve rpm-pkg portability by supporting kernel-install as a fallback of new-kernel-pkg - extend Kconfig listnewconfig target to provide more information * tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: extend output of 'listnewconfig' kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg Kbuild: fix # escaping in .cmd files for future Make kbuild: deb-pkg: split generating packaging and build kbuild: use -fmacro-prefix-map to make __FILE__ a relative path kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers kbuild: rename *-asn1.[ch] to *.asn1.[ch] kbuild: clean up *-asn1.[ch] patterns from top-level Makefile .gitignore: move *-asn1.[ch] patterns to the top-level .gitignore kbuild: add %.dtb.S and %.dtb to 'targets' automatically kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically genksyms: generate lexer and parser during build instead of shipping kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile .gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore kbuild: use HOSTLDFLAGS for single .c executables 16 April 2018, 00:21:30 UTC
9fb71c2 Linus Torvalds 15 April 2018, 23:12:35 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes and updates for x86: - Address a swiotlb regression which was caused by the recent DMA rework and made driver fail because dma_direct_supported() returned false - Fix a signedness bug in the APIC ID validation which caused invalid APIC IDs to be detected as valid thereby bloating the CPU possible space. - Fix inconsisten config dependcy/select magic for the MFD_CS5535 driver. - Fix a corruption of the physical address space bits when encryption has reduced the address space and late cpuinfo updates overwrite the reduced bit information with the original value. - Dominiks syscall rework which consolidates the architecture specific syscall functions so all syscalls can be wrapped with the same macros. This allows to switch x86/64 to struct pt_regs based syscalls. Extend the clearing of user space controlled registers in the entry patch to the lower registers" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Fix signedness bug in APIC ID validity checks x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption x86/olpc: Fix inconsistent MFD_CS5535 configuration swiotlb: Use dma_direct_supported() for swiotlb_ops syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*() syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention syscalls/core, syscalls/x86: Clean up syscall stub naming convention syscalls/x86: Extend register clearing on syscall entry to lower registers syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64 syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32 syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y x86/syscalls: Don't pointlessly reload the system call number x86/mm: Fix documentation of module mapping range with 4-level paging x86/cpuid: Switch to 'static const' specifier 15 April 2018, 23:12:35 UTC
6b0a02e Linus Torvalds 15 April 2018, 20:35:29 UTC Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 pti updates from Thomas Gleixner: "Another series of PTI related changes: - Remove the manual stack switch for user entries from the idtentry code. This debloats entry by 5k+ bytes of text. - Use the proper types for the asm/bootparam.h defines to prevent user space compile errors. - Use PAGE_GLOBAL for !PCID systems to gain back performance - Prevent setting of huge PUD/PMD entries when the entries are not leaf entries otherwise the entries to which the PUD/PMD points to and are populated get lost" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pgtable: Don't set huge PUD/PMD on non-leaf entries x86/pti: Leave kernel text global for !PCID x86/pti: Never implicitly clear _PAGE_GLOBAL for kernel image x86/pti: Enable global pages for shared areas x86/mm: Do not forbid _PAGE_RW before init for __ro_after_init x86/mm: Comment _PAGE_GLOBAL mystery x86/mm: Remove extra filtering in pageattr code x86/mm: Do not auto-massage page protections x86/espfix: Document use of _PAGE_GLOBAL x86/mm: Introduce "default" kernel PTE mask x86/mm: Undo double _PAGE_PSE clearing x86/mm: Factor out pageattr _PAGE_GLOBAL setting x86/entry/64: Drop idtentry's manual stack switch for user entries x86/uapi: Fix asm/bootparam.h userspace compilation errors 15 April 2018, 20:35:29 UTC
71b8ebb Linus Torvalds 15 April 2018, 19:43:30 UTC Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "A few scheduler fixes: - Prevent a bogus warning vs. runqueue clock update flags in do_sched_rt_period_timer() - Simplify the helper functions which handle requests for skipping the runqueue clock updat. - Do not unlock the tunables mutex in the error path of the cpu frequency scheduler utils. Its not held. - Enforce proper alignement for 'struct util_est' in sched_avg to prevent a misalignment fault on IA64" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Force proper alignment of 'struct util_est' sched/core: Simplify helpers for rq clock update skip requests sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning sched/cpufreq/schedutil: Fix error path mutex unlock 15 April 2018, 19:43:30 UTC
174e719 Linus Torvalds 15 April 2018, 19:36:31 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more perf updates from Thomas Gleixner: "A rather large set of perf updates: Kernel: - Fix various initialization issues - Prevent creating [ku]probes for not CAP_SYS_ADMIN users Tooling: - Show only failing syscalls with 'perf trace --failure' (Arnaldo Carvalho de Melo) e.g: See what 'openat' syscalls are failing: # perf trace --failure -e openat 762.323 ( 0.007 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video2) = -1 ENOENT No such file or directory <SNIP N /dev/videoN open attempts... sigh, where is that improvised camera lid?!? > 790.228 ( 0.008 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video63) = -1 ENOENT No such file or directory ^C# - Show information about the event (freq, nr_samples, total period/nr_events) in the annotate --tui and --stdio2 'perf annotate' output, similar to the first line in the 'perf report --tui', but just for the samples for a the annotated symbol (Arnaldo Carvalho de Melo) - Introduce 'perf version --build-options' to show what features were linked, aliased as well as a shorter 'perf -vv' (Jin Yao) - Add a "dso_size" sort order (Kim Phillips) - Remove redundant ')' in the tracepoint output in 'perf trace' (Changbin Du) - Synchronize x86's cpufeatures.h, no effect on toolss (Arnaldo Carvalho de Melo) - Show group details on the title line in the annotate browser and 'perf annotate --stdio2' output, so that the per-event columns can have headers (Arnaldo Carvalho de Melo) - Fixup vertical line separating metrics from instructions and cleaning unused lines at the bottom, both in the annotate TUI browser (Arnaldo Carvalho de Melo) - Remove duplicated 'samples' in lost samples warning in 'perf report' (Arnaldo Carvalho de Melo) - Synchronize i915_drm.h, silencing the perf build process, automagically adding support for the new DRM_I915_QUERY ioctl (Arnaldo Carvalho de Melo) - Make auxtrace_queues__add_buffer() allocate struct buffer, from a patchkit already applied (Adrian Hunter) - Fix the --stdio2/TUI annotate output to include group details, be it for a recorded '{a,b,f}' explicit event group or when forcing group display using 'perf report --group' for a set of events not recorded as a group (Arnaldo Carvalho de Melo) - Fix display artifacts in the ui browser (base class for the annotate and main report/top TUI browser) related to the extra title lines work (Arnaldo Carvalho de Melo) - perf auxtrace refactorings, leftovers from a previously partially processed patchset (Adrian Hunter) - Fix the builtin clang build (Sandipan Das, Arnaldo Carvalho de Melo) - Synchronize i915_drm.h, silencing a perf build warning and in the process automagically adding support for a new ioctl command (Arnaldo Carvalho de Melo) - Fix a strncpy issue in uprobe tracing" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) perf/core: Need CAP_SYS_ADMIN to create k/uprobe with perf_event_open() tracing/uprobe_event: Fix strncpy corner case perf/core: Fix perf_uprobe_init() perf/core: Fix perf_kprobe_init() perf/core: Fix use-after-free in uprobe_perf_close() perf tests clang: Fix function name for clang IR test perf clang: Add support for recent clang versions perf tools: Fix perf builds with clang support perf tools: No need to include namespaces.h in util.h perf hists browser: Remove leftover from row returned from refresh perf hists browser: Show extra_title_lines in the 'D' debug hotkey perf auxtrace: Make auxtrace_queues__add_buffer() do CPU filtering tools headers uapi: Synchronize i915_drm.h perf report: Remove duplicated 'samples' in lost samples warning perf ui browser: Fixup cleaning unused lines at the bottom perf annotate browser: Fixup vertical line separating metrics from instructions perf annotate: Show group details on the title line perf auxtrace: Make auxtrace_queues__add_buffer() allocate struct buffer perf/x86/intel: Move regs->flags EXACT bit init perf trace: Remove redundant ')' ... 15 April 2018, 19:36:31 UTC
19ca90d Linus Torvalds 15 April 2018, 19:32:06 UTC Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 EFI bootup fixlet from Thomas Gleixner: "A single fix for an early boot warning caused by invoking this_cpu_has() before SMP initialization" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix bogus warning during EFI bootup, use boot_cpu_has() instead of this_cpu_has() in build_cr3_noflush() 15 April 2018, 19:32:06 UTC
68d54d3 Linus Torvalds 15 April 2018, 19:29:46 UTC Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq affinity fixes from Thomas Gleixner: - Fix error path handling in the affinity spreading code - Make affinity spreading smarter to avoid issues on systems which claim to have hotpluggable CPUs while in fact they can't hotplug anything. So instead of trying to spread the vectors (and thereby the associated device queues) to all possibe CPUs, spread them on all present CPUs first. If there are left over vectors after that first step they are spread among the possible, but not present CPUs which keeps the code backwards compatible for virtual decives and NVME which allocate a queue per possible CPU, but makes the spreading smarter for devices which have less queues than possible or present CPUs. * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/affinity: Spread irq vectors among present CPUs as far as possible genirq/affinity: Allow irq spreading from a given starting point genirq/affinity: Move actual irq vector spreading into a helper function genirq/affinity: Rename *node_to_possible_cpumask as *node_to_cpumask genirq/affinity: Don't return with empty affinity masks on error 15 April 2018, 19:29:46 UTC
9dceab8 Linus Torvalds 15 April 2018, 19:27:58 UTC Merge tag 'for-linus' of git://github.com/openrisc/linux Pull OpenRISC fixlet from Stafford Horne: "Just one small thing here, it came in a while back but I didnt have anything in my 4.16 queue, still its the only thing for 4.17 so sending it alone. Small cleanup: remove unused __ARCH_HAVE_MMU define" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: remove unused __ARCH_HAVE_MMU define 15 April 2018, 19:27:58 UTC
b1cb4f9 Linus Torvalds 15 April 2018, 18:57:12 UTC Merge tag 'powerpc-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix crashes when loading modules built with a different CONFIG_RELOCATABLE value by adding CONFIG_RELOCATABLE to vermagic. - Fix busy loops in the OPAL NVRAM driver if we get certain error conditions from firmware. - Remove tlbie trace points from KVM code that's called in real mode, because it causes crashes. - Fix checkstops caused by invalid tlbiel on Power9 Radix. - Ensure the set of CPU features we "know" are always enabled is actually the minimal set when we build with support for firmware supplied CPU features. Thanks to: Aneesh Kumar K.V, Anshuman Khandual, Nicholas Piggin. * tag 'powerpc-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Fix CPU_FTRS_ALWAYS vs DT CPU features powerpc/mm/radix: Fix checkstops caused by invalid tlbiel KVM: PPC: Book3S HV: trace_tlbie must not be called in realmode powerpc/8xx: Fix build with hugetlbfs enabled powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops powerpc/fscr: Enable interrupts earlier before calling get_user() powerpc/64s: Fix section mismatch warnings from setup_rfi_flush() powerpc/modules: Fix crashes by adding CONFIG_RELOCATABLE to vermagic 15 April 2018, 18:57:12 UTC
18b7fd1 Linus Torvalds 14 April 2018, 15:50:50 UTC Merge branch 'akpm' (patches from Andrew) Merge yet more updates from Andrew Morton: - various hotfixes - kexec_file updates and feature work * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (27 commits) kernel/kexec_file.c: move purgatories sha256 to common code kernel/kexec_file.c: allow archs to set purgatory load address kernel/kexec_file.c: remove mis-use of sh_offset field during purgatory load kernel/kexec_file.c: remove unneeded variables in kexec_purgatory_setup_sechdrs kernel/kexec_file.c: remove unneeded for-loop in kexec_purgatory_setup_sechdrs kernel/kexec_file.c: split up __kexec_load_puragory kernel/kexec_file.c: use read-only sections in arch_kexec_apply_relocations* kernel/kexec_file.c: search symbols in read-only kexec_purgatory kernel/kexec_file.c: make purgatory_info->ehdr const kernel/kexec_file.c: remove checks in kexec_purgatory_load include/linux/kexec.h: silence compile warnings kexec_file, x86: move re-factored code to generic side x86: kexec_file: clean up prepare_elf64_headers() x86: kexec_file: lift CRASH_MAX_RANGES limit on crash_mem buffer x86: kexec_file: remove X86_64 dependency from prepare_elf64_headers() x86: kexec_file: purge system-ram walking from prepare_elf64_headers() kexec_file,x86,powerpc: factor out kexec_file_ops functions kexec_file: make use of purgatory optional proc: revalidate misc dentries mm, slab: reschedule cache_reap() on the same CPU ... 14 April 2018, 15:50:50 UTC
df6f280 Philipp Rudo 13 April 2018, 22:36:46 UTC kernel/kexec_file.c: move purgatories sha256 to common code The code to verify the new kernels sha digest is applicable for all architectures. Move it to common code. One problem is the string.c implementation on x86. Currently sha256 includes x86/boot/string.h which defines memcpy and memset to be gcc builtins. By moving the sha256 implementation to common code and changing the include to linux/string.h both functions are no longer defined. Thus definitions have to be provided in x86/purgatory/string.c Link: http://lkml.kernel.org/r/20180321112751.22196-12-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2018, 00:10:28 UTC
3be3f61 Philipp Rudo 13 April 2018, 22:36:43 UTC kernel/kexec_file.c: allow archs to set purgatory load address For s390 new kernels are loaded to fixed addresses in memory before they are booted. With the current code this is a problem as it assumes the kernel will be loaded to an 'arbitrary' address. In particular, kexec_locate_mem_hole searches for a large enough memory region and sets the load address (kexec_bufer->mem) to it. Luckily there is a simple workaround for this problem. By returning 1 in arch_kexec_walk_mem, kexec_locate_mem_hole is turned off. This allows the architecture to set kbuf->mem by hand. While the trick works fine for the kernel it does not for the purgatory as here the architectures don't have access to its kexec_buffer. Give architectures access to the purgatories kexec_buffer by changing kexec_load_purgatory to take a pointer to it. With this change architectures have access to the buffer and can edit it as they need. A nice side effect of this change is that we can get rid of the purgatory_info->purgatory_load_address field. As now the information stored there can directly be accessed from kbuf->mem. Link: http://lkml.kernel.org/r/20180321112751.22196-11-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2018, 00:10:28 UTC
8da0b72 Philipp Rudo 13 April 2018, 22:36:39 UTC kernel/kexec_file.c: remove mis-use of sh_offset field during purgatory load The current code uses the sh_offset field in purgatory_info->sechdrs to store a pointer to the current load address of the section. Depending whether the section will be loaded or not this is either a pointer into purgatory_info->purgatory_buf or kexec_purgatory. This is not only a violation of the ELF standard but also makes the code very hard to understand as you cannot tell if the memory you are using is read-only or not. Remove this misuse and store the offset of the section in pugaroty_info->purgatory_buf in sh_offset. Link: http://lkml.kernel.org/r/20180321112751.22196-10-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2018, 00:10:28 UTC
620f697 Philipp Rudo 13 April 2018, 22:36:35 UTC kernel/kexec_file.c: remove unneeded variables in kexec_purgatory_setup_sechdrs The main loop currently uses quite a lot of variables to update the section headers. Some of them are unnecessary. So clean them up a little. Link: http://lkml.kernel.org/r/20180321112751.22196-9-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2018, 00:10:28 UTC
f1b1cca Philipp Rudo 13 April 2018, 22:36:32 UTC kernel/kexec_file.c: remove unneeded for-loop in kexec_purgatory_setup_sechdrs To update the entry point there is an extra loop over all section headers although this can be done in the main loop. So move it there and eliminate the extra loop and variable to store the 'entry section index'. Also, in the main loop, move the usual case, i.e. non-bss section, out of the extra if-block. Link: http://lkml.kernel.org/r/20180321112751.22196-8-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2018, 00:10:28 UTC
9304570 Philipp Rudo 13 April 2018, 22:36:28 UTC kernel/kexec_file.c: split up __kexec_load_puragory When inspecting __kexec_load_purgatory you find that it has two tasks 1) setting up the kexec_buffer for the new kernel and, 2) setting up pi->sechdrs for the final load address. The two tasks are independent of each other. To improve readability split up __kexec_load_purgatory into two functions, one for each task, and call them directly from kexec_load_purgatory. Link: http://lkml.kernel.org/r/20180321112751.22196-7-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2018, 00:10:28 UTC
8aec395 Philipp Rudo 13 April 2018, 22:36:24 UTC kernel/kexec_file.c: use read-only sections in arch_kexec_apply_relocations* When the relocations are applied to the purgatory only the section the relocations are applied to is writable. The other sections, i.e. the symtab and .rel/.rela, are in read-only kexec_purgatory. Highlight this by marking the corresponding variables as 'const'. While at it also change the signatures of arch_kexec_apply_relocations* to take section pointers instead of just the index of the relocation section. This removes the second lookup and sanity check of the sections in arch code. Link: http://lkml.kernel.org/r/20180321112751.22196-6-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2018, 00:10:28 UTC
961d921 Philipp Rudo 13 April 2018, 22:36:21 UTC kernel/kexec_file.c: search symbols in read-only kexec_purgatory The stripped purgatory does not contain a symtab. So when looking for symbols this is done in read-only kexec_purgatory. Highlight this by marking the corresponding variables as 'const'. Link: http://lkml.kernel.org/r/20180321112751.22196-5-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2018, 00:10:28 UTC
back to top