Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
976d167 Linus Torvalds 05 October 2011, 01:11:50 UTC Linux 3.1-rc9 05 October 2011, 01:11:50 UTC
8a04b45 Linus Torvalds 04 October 2011, 17:37:06 UTC Merge git://github.com/davem330/net * git://github.com/davem330/net: pch_gbe: Fixed the issue on which a network freezes pch_gbe: Fixed the issue on which PC was frozen when link was downed. make PACKET_STATISTICS getsockopt report consistently between ring and non-ring net: xen-netback: correctly restart Tx after a VM restore/migrate bonding: properly stop queuing work when requested can bcm: fix incomplete tx_setup fix RDSRDMA: Fix cleanup of rds_iw_mr_pool net: Documentation: Fix type of variables ibmveth: Fix oops on request_irq failure ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket cxgb4: Fix EEH on IBM P7IOC can bcm: fix tx_setup off-by-one errors MAINTAINERS: tehuti: Alexander Indenbaum's address bounces dp83640: reduce driver noise ptp: fix L2 event message recognition 04 October 2011, 17:37:06 UTC
a8062e4 Linus Torvalds 04 October 2011, 16:59:22 UTC Merge branch 'fix/asoc' of git://github.com/tiwai/sound * 'fix/asoc' of git://github.com/tiwai/sound: ASoC: omap_mcpdm_remove cannot be __devexit ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADC ASoC: use a valid device for dev_err() in Zylonite 04 October 2011, 16:59:22 UTC
1fd2a85 Linus Torvalds 04 October 2011, 16:54:18 UTC Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: fix channel_remap setup (v2) drm/radeon: Set cursor x/y to 0 when x/yorigin > 0. drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation. drm/radeon: Simplify cursor x/yorigin calculation. drm/radeon/kms: fix cursor image off-by-one error drm/radeon/kms: Fix logic error in DP HPD handler drm/radeon/kms: add retry limits for native DP aux defer drm/radeon/kms: fix regression in DP aux defer handling 04 October 2011, 16:54:18 UTC
f8451c3 Linus Torvalds 04 October 2011, 16:52:56 UTC Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6 * 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: spi-topcliff-pch: Fix overrun issue spi-topcliff-pch: Add recovery processing in case FIFO overrun error occurs spi-topcliff-pch: Fix CPU read complete condition issue spi-topcliff-pch: Fix SSN Control issue spi-topcliff-pch: add tx-memory clear after complete transmitting 04 October 2011, 16:52:56 UTC
5f39e67 Jon Mason 03 October 2011, 14:50:20 UTC PCI: Disable MPS configuration by default Add the ability to disable PCI-E MPS turning and using the BIOS configured MPS defaults. Due to the number of issues recently discovered on some x86 chipsets, make this the default behavior. Also, add the option for peer to peer DMA MPS configuration. Peer to peer DMA is outside the scope of this patch, but MPS configuration could prevent it from working by having the MPS on one root port different than the MPS on another. To work around this, simply make the system wide MPS the smallest possible value (128B). Signed-off-by: Jon Mason <mason@myri.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 October 2011, 16:52:28 UTC
12d5180 Alex Deucher 04 October 2011, 14:46:34 UTC drm/radeon/kms: fix channel_remap setup (v2) Most asics just use the hw default value which requires no explicit programming. For those that need a different value, the vbios will program it properly. As such, there's no need to program these registers explicitly in the driver. Changing MC_SHARED_CHREMAP requires a reload of all data in vram otherwise its contents will be scambled. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=40103 v2: drop now unused channel_remap functions. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 04 October 2011, 16:24:14 UTC
f3e03e2 Tomoya MORINAGA 06 September 2011, 08:16:38 UTC spi-topcliff-pch: Fix overrun issue We found that adding load, Rx data sometimes drops.(with DMA transfer mode) The cause is that before starting Rx-DMA processing, Tx-DMA processing starts. This causes FIFO overrun occurs. This patch fixes the issue by modifying FIFO tx-threshold and DMA descriptor size like below. Current this patch Rx-descriptor 4Byte+12Byte*341 --> 12Byte*340-4Byte-12Byte Rx-threshold (Not modified) Tx-descriptor 4Byte+12Byte*341 --> 16Byte-12Byte*340 Rx-threshold 12Byte --> 2Byte Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 04 October 2011, 16:10:50 UTC
25e803f Tomoya MORINAGA 06 September 2011, 08:16:37 UTC spi-topcliff-pch: Add recovery processing in case FIFO overrun error occurs Add recovery processing in case FIFO overrun error occurs with DMA transfer mode. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 04 October 2011, 16:10:50 UTC
373b0eb Tomoya MORINAGA 06 September 2011, 08:16:36 UTC spi-topcliff-pch: Fix CPU read complete condition issue We found Rx data sometimes drops.(with non-DMA transfer mode) The cause is read complete condition is not true. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 04 October 2011, 16:10:50 UTC
8b7aa96 Tomoya MORINAGA 06 September 2011, 08:16:35 UTC spi-topcliff-pch: Fix SSN Control issue During processing 1 command/data series, SSN should keep LOW. However, currently, SSN becomes HIGH. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 04 October 2011, 16:10:50 UTC
27504be Tomoya MORINAGA 06 September 2011, 08:16:34 UTC spi-topcliff-pch: add tx-memory clear after complete transmitting Currently, in case of reading date from SPI flash, command is sent twice. The cause is that tx-memory clear processing is missing . This patch adds the tx-momory clear processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 04 October 2011, 16:10:50 UTC
05faadc Takashi Iwai 04 October 2011, 01:09:14 UTC lis3: fix regression of HP DriveGuard with 8bit chip Commit 2a7fade7e03 ("hwmon: lis3: Power on corrections") caused a regression on HP laptops with 8bit chip. Writing CTRL2_BOOT_8B bit seems clearing the BIOS setup, and no proper interrupt for DriveGuard will be triggered any more. Since the init code there is basically only for embedded devices, put a pdata check so that the problematic initialization will be skipped for hp_accel stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 October 2011, 03:51:51 UTC
0f86267 Linus Torvalds 03 October 2011, 19:54:56 UTC Merge branch 'hwmon-for-linus' of git://github.com/groeck/linux * 'hwmon-for-linus' of git://github.com/groeck/linux: hwmon: (coretemp) Avoid leaving around dangling pointer hwmon: (coretemp) Fixup platform device ID change 03 October 2011, 19:54:56 UTC
0d61792 Linus Torvalds 03 October 2011, 19:53:43 UTC Merge git://github.com/davem330/ide * git://github.com/davem330/ide: ide-disk: Fix request requeuing 03 October 2011, 19:53:43 UTC
7fd21be Linus Torvalds 03 October 2011, 19:17:44 UTC Merge branch 'btrfs-3.0' of git://github.com/chrismason/linux * 'btrfs-3.0' of git://github.com/chrismason/linux: Btrfs: force a page fault if we have a shorty copy on a page boundary 03 October 2011, 19:17:44 UTC
2c8fc86 Borislav Petkov 03 October 2011, 18:28:18 UTC ide-disk: Fix request requeuing Simon Kirby reported that on his RAID setup with idedisk underneath the box OOMs after a couple of days of runtime. Running with CONFIG_DEBUG_KMEMLEAK pointed to idedisk_prep_fn() which unconditionally allocates an ide_cmd struct. However, ide_requeue_and_plug() can be called more than once per request, either from the request issue or the IRQ handler path and do blk_peek_request() ends up in idedisk_prep_fn() repeatedly, allocating a struct ide_cmd everytime and "forgetting" the previous pointer. Make sure the code reuses the old allocated chunk. Reported-and-tested-by: Simon Kirby <sim@hostway.ca> Cc: <stable@kernel.org> [ 39.x, 3.0.x ] Link: http://marc.info/?l=linux-kernel&m=131667641517919 Link: http://lkml.kernel.org/r/20110922072643.GA27232@hostway.ca Signed-off-by: Borislav Petkov <bp@alien8.de> Signed-off-by: David S. Miller <davem@davemloft.net> 03 October 2011, 18:28:18 UTC
805e969 Toshiharu Okada 25 September 2011, 21:27:43 UTC pch_gbe: Fixed the issue on which a network freezes The pch_gbe driver has an issue which a network stops, when receiving traffic is high. In the case, The link down and up are necessary to return a network. This patch fixed this issue. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 October 2011, 18:20:39 UTC
5f3a114 Toshiharu Okada 25 September 2011, 21:27:42 UTC pch_gbe: Fixed the issue on which PC was frozen when link was downed. When a link was downed during network use, there is an issue on which PC freezes. This patch fixed this issue. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 October 2011, 18:20:39 UTC
7091fbd Willem de Bruijn 30 September 2011, 10:38:28 UTC make PACKET_STATISTICS getsockopt report consistently between ring and non-ring This is a minor change. Up until kernel 2.6.32, getsockopt(fd, SOL_PACKET, PACKET_STATISTICS, ...) would return total and dropped packets since its last invocation. The introduction of socket queue overflow reporting [1] changed drop rate calculation in the normal packet socket path, but not when using a packet ring. As a result, the getsockopt now returns different statistics depending on the reception method used. With a ring, it still returns the count since the last call, as counts are incremented in tpacket_rcv and reset in getsockopt. Without a ring, it returns 0 if no drops occurred since the last getsockopt and the total drops over the lifespan of the socket otherwise. The culprit is this line in packet_rcv, executed on a drop: drop_n_acct: po->stats.tp_drops = atomic_inc_return(&sk->sk_drops); As it shows, the new drop number it taken from the socket drop counter, which is not reset at getsockopt. I put together a small example that demonstrates the issue [2]. It runs for 10 seconds and overflows the queue/ring on every odd second. The reported drop rates are: ring: 16, 0, 16, 0, 16, ... non-ring: 0, 15, 0, 30, 0, 46, 0, 60, 0 , 74. Note how the even ring counts monotonically increase. Because the getsockopt adds tp_drops to tp_packets, total counts are similarly reported cumulatively. Long story short, reinstating the original code, as the below patch does, fixes the issue at the cost of additional per-packet cycles. Another solution that does not introduce per-packet overhead is be to keep the current data path, record the value of sk_drops at getsockopt() at call N in a new field in struct packetsock and subtract that when reporting at call N+1. I'll be happy to code that, instead, it's just more messy. [1] http://patchwork.ozlabs.org/patch/35665/ [2] http://kernel.googlecode.com/files/test-packetsock-getstatistics.c Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 October 2011, 18:18:26 UTC
d0e5d83 David Vrabel 30 September 2011, 06:37:51 UTC net: xen-netback: correctly restart Tx after a VM restore/migrate If a VM is saved and restored (or migrated) the netback driver will no longer process any Tx packets from the frontend. xenvif_up() does not schedule the processing of any pending Tx requests from the front end because the carrier is off. Without this initial kick the frontend just adds Tx requests to the ring without raising an event (until the ring is full). This was caused by 47103041e91794acdbc6165da0ae288d844c820b (net: xen-netback: convert to hw_features) which reordered the calls to xenvif_up() and netif_carrier_on() in xenvif_connect(). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 October 2011, 18:15:46 UTC
a0db2da Andy Gospodarek 23 September 2011, 10:53:34 UTC bonding: properly stop queuing work when requested During a test where a pair of bonding interfaces using ARP monitoring were both brought up and torn down (with an rmmod) repeatedly, a panic in the timer code was noticed. I tracked this down and determined that any of the bonding functions that ran as workqueue handlers and requeued more work might not properly exit when the module was removed. There was a flag protected by the bond lock called kill_timers that is set when the interface goes down or the module is removed, but many of the functions that monitor link status now unlock the bond lock to take rtnl first. There is a chance that another CPU running the rmmod could get the lock and set kill_timers after the first check has passed. This patch does not allow any function to queue work that will make itself run unless kill_timers is not set. I also noticed while doing this work that bond_resend_igmp_join_requests did not have a check for kill_timers, so I added the needed call there as well. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Reported-by: Liang Zheng <lzheng@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 October 2011, 17:48:20 UTC
02e6859 Michel Dänzer 30 September 2011, 15:16:53 UTC drm/radeon: Set cursor x/y to 0 when x/yorigin > 0. Apart from the obvious cleanup, this should make the line cursor_end = x - xorigin + w; correct now. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 03 October 2011, 17:37:37 UTC
b8aee29 Michel Dänzer 30 September 2011, 15:16:52 UTC drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation. Fixes cursor disappearing prematurely when moving off a top/left edge which is not located at the desktop top/left edge. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 03 October 2011, 17:37:36 UTC
7d30952 Michel Dänzer 30 September 2011, 15:16:51 UTC drm/radeon: Simplify cursor x/yorigin calculation. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 03 October 2011, 17:37:35 UTC
b356fe0 Nicholas Miell 30 September 2011, 02:07:14 UTC drm/radeon/kms: fix cursor image off-by-one error The mouse cursor hotspot calculation when the cursor is partially off the top or left side of the screen was off by one. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=41158 Signed-off-by: Nicholas Miell <nmiell@gmail.com> Reviewed-by: Michel Dänzer <michel@daenzer.net> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 03 October 2011, 17:37:33 UTC
5ba7ddf Alex Deucher 03 October 2011, 12:37:33 UTC drm/radeon/kms: Fix logic error in DP HPD handler Only disable the pipe if the monitor is physically disconnected. The previous logic also disabled the pipe if the link was trained. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41248 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 03 October 2011, 17:37:32 UTC
6375bda Alex Deucher 03 October 2011, 13:13:46 UTC drm/radeon/kms: add retry limits for native DP aux defer The previous code could potentially loop forever. Limit the number of DP aux defer retries to 4 for native aux transactions, same as i2c over aux transactions. Noticed by: Brad Campbell <lists2009@fnarfbargle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Brad Campbell <lists2009@fnarfbargle.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 03 October 2011, 17:37:31 UTC
109bc10 Alex Deucher 03 October 2011, 13:13:45 UTC drm/radeon/kms: fix regression in DP aux defer handling An incorrect ordering in the error checking code lead to DP aux defer being skipped in the aux native write path. Move the bytes transferred check (ret == 0) below the defer check. Tracked down by: Brad Campbell <brad@fnarfbargle.com> Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41121 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Brad Campbell <brad@fnarfbargle.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 03 October 2011, 17:37:30 UTC
9b13776 Linus Torvalds 03 October 2011, 02:23:44 UTC Merge branch 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6 * 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6: mfd: Fix generic irq chip ack function name for jz4740-adc 03 October 2011, 02:23:44 UTC
4edf588 Linus Torvalds 03 October 2011, 02:22:44 UTC Merge branch 'for-linus' of git://github.com/tiwai/sound * 'for-linus' of git://github.com/tiwai/sound: ALSA: hda - Fix a regression of the position-buffer check 03 October 2011, 02:22:44 UTC
b5c49d4 Arnd Bergmann 02 October 2011, 14:45:31 UTC ASoC: omap_mcpdm_remove cannot be __devexit omap_mcpdm_remove is used from asoc_mcpdm_probe, which is an initcall, and must not be discarded when HOTPLUG is disabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> 02 October 2011, 19:19:59 UTC
21d17dd Axel Lin 02 October 2011, 12:41:04 UTC ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADC Current code set update bits for WM8753_LDAC and WM8753_RDAC twice, but missed setting update bits for WM8753_LADC and WM8753_RADC. I think it is a copy-paste bug in commit 776065 "ASoC: codecs: wm8753: Fix register cache incoherency". Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org 02 October 2011, 18:55:48 UTC
eff919a Arnd Bergmann 01 October 2011, 20:03:34 UTC ASoC: use a valid device for dev_err() in Zylonite A recent conversion has introduced references to &pdev->dev, which does not actually exist in all the contexts it's used in. Replace this with card->dev where necessary, in order to let the driver build again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org 02 October 2011, 18:16:52 UTC
2e51818 Linus Torvalds 02 October 2011, 00:46:13 UTC Merge branch 'perf-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip * 'perf-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: perf tools: Fix raw sample reading 02 October 2011, 00:46:13 UTC
f72a209 Linus Torvalds 01 October 2011, 15:37:25 UTC Merge branches 'irq-urgent-for-linus', 'x86-urgent-for-linus' and 'sched-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip * 'irq-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: irq: Fix check for already initialized irq_domain in irq_domain_add irq: Add declaration of irq_domain_simple_ops to irqdomain.h * 'x86-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: x86/rtc: Don't recursively acquire rtc_lock * 'sched-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: posix-cpu-timers: Cure SMP wobbles sched: Fix up wchan borkage sched/rt: Migrate equal priority tasks to available CPUs 01 October 2011, 15:37:25 UTC
b631642 Josef Bacik 30 September 2011, 19:23:54 UTC Btrfs: force a page fault if we have a shorty copy on a page boundary A user reported a problem where ceph was getting into 100% cpu usage while doing some writing. It turns out it's because we were doing a short write on a not uptodate page, which means we'd fall back at one page at a time and fault the page in. The problem is our position is on the page boundary, so our fault in logic wasn't actually reading the page, so we'd just spin forever or until the page got read in by somebody else. This will force a readpage if we end up doing a short copy. Alexandre could reproduce this easily with ceph and reports it fixes his problem. I also wrote a reproducer that no longer hangs my box with this patch. Thanks, Reported-and-tested-by: Alexandre Oliva <aoliva@redhat.com> Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 30 September 2011, 19:23:54 UTC
9d3ec7a Ingo Molnar 30 September 2011, 18:08:56 UTC Merge branch 'perf/urgent' of git://github.com/acmel/linux into perf/urgent 30 September 2011, 18:08:56 UTC
d670ec1 Peter Zijlstra 01 September 2011, 10:42:04 UTC posix-cpu-timers: Cure SMP wobbles David reported: Attached below is a watered-down version of rt/tst-cpuclock2.c from GLIBC. Just build it with "gcc -o test test.c -lpthread -lrt" or similar. Run it several times, and you will see cases where the main thread will measure a process clock difference before and after the nanosleep which is smaller than the cpu-burner thread's individual thread clock difference. This doesn't make any sense since the cpu-burner thread is part of the top-level process's thread group. I've reproduced this on both x86-64 and sparc64 (using both 32-bit and 64-bit binaries). For example: [davem@boricha build-x86_64-linux]$ ./test process: before(0.001221967) after(0.498624371) diff(497402404) thread: before(0.000081692) after(0.498316431) diff(498234739) self: before(0.001223521) after(0.001240219) diff(16698) [davem@boricha build-x86_64-linux]$ The diff of 'process' should always be >= the diff of 'thread'. I make sure to wrap the 'thread' clock measurements the most tightly around the nanosleep() call, and that the 'process' clock measurements are the outer-most ones. --- #include <unistd.h> #include <stdio.h> #include <stdlib.h> #include <time.h> #include <fcntl.h> #include <string.h> #include <errno.h> #include <pthread.h> static pthread_barrier_t barrier; static void *chew_cpu(void *arg) { pthread_barrier_wait(&barrier); while (1) __asm__ __volatile__("" : : : "memory"); return NULL; } int main(void) { clockid_t process_clock, my_thread_clock, th_clock; struct timespec process_before, process_after; struct timespec me_before, me_after; struct timespec th_before, th_after; struct timespec sleeptime; unsigned long diff; pthread_t th; int err; err = clock_getcpuclockid(0, &process_clock); if (err) return 1; err = pthread_getcpuclockid(pthread_self(), &my_thread_clock); if (err) return 1; pthread_barrier_init(&barrier, NULL, 2); err = pthread_create(&th, NULL, chew_cpu, NULL); if (err) return 1; err = pthread_getcpuclockid(th, &th_clock); if (err) return 1; pthread_barrier_wait(&barrier); err = clock_gettime(process_clock, &process_before); if (err) return 1; err = clock_gettime(my_thread_clock, &me_before); if (err) return 1; err = clock_gettime(th_clock, &th_before); if (err) return 1; sleeptime.tv_sec = 0; sleeptime.tv_nsec = 500000000; nanosleep(&sleeptime, NULL); err = clock_gettime(th_clock, &th_after); if (err) return 1; err = clock_gettime(my_thread_clock, &me_after); if (err) return 1; err = clock_gettime(process_clock, &process_after); if (err) return 1; diff = process_after.tv_nsec - process_before.tv_nsec; printf("process: before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n", process_before.tv_sec, process_before.tv_nsec, process_after.tv_sec, process_after.tv_nsec, diff); diff = th_after.tv_nsec - th_before.tv_nsec; printf("thread: before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n", th_before.tv_sec, th_before.tv_nsec, th_after.tv_sec, th_after.tv_nsec, diff); diff = me_after.tv_nsec - me_before.tv_nsec; printf("self: before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n", me_before.tv_sec, me_before.tv_nsec, me_after.tv_sec, me_after.tv_nsec, diff); return 0; } This is due to us using p->se.sum_exec_runtime in thread_group_cputime() where we iterate the thread group and sum all data. This does not take time since the last schedule operation (tick or otherwise) into account. We can cure this by using task_sched_runtime() at the cost of having to take locks. This also means we can (and must) do away with thread_group_sched_runtime() since the modified thread_group_cputime() is now more accurate and would deadlock when called from thread_group_sched_runtime(). Aside of that it makes the function safe on 32 bit systems. The old code added t->se.sum_exec_runtime unprotected. sum_exec_runtime is a 64bit value and could be changed on another cpu at the same time. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stable@kernel.org Link: http://lkml.kernel.org/r/1314874459.7945.22.camel@twins Tested-by: David Miller <davem@davemloft.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 30 September 2011, 12:07:06 UTC
798cb7e Takashi Iwai 30 September 2011, 06:52:26 UTC ALSA: hda - Fix a regression of the position-buffer check The commit a810364a0424c297242c6c66071a42f7675a5568 ALSA: hda - Handle -1 as invalid position, too caused a regression on some machines that require the position-buffer instead of LPIB, e.g. resulting in noises with mic recording with PulseAudio. This patch fixes the detection by delaying the test at the timing as same as 3.0, i.e. doing the position check only when requested in azx_position_ok(). Reported-and-tested-by: Rocko Requin <rockorequin@hotmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 30 September 2011, 06:57:15 UTC
47ea91b Ram Pai 22 September 2011, 07:48:58 UTC Resource: fix wrong resource window calculation __find_resource() incorrectly returns a resource window which overlaps an existing allocated window. This happens when the parent's resource-window spans 0x00000000 to 0xffffffff and is entirely allocated to all its children resource-windows. __find_resource() looks for gaps in resource allocation among the children resource windows. When it encounters the last child window it blindly tries the range next to one allocated to the last child. Since the last child's window ends at 0xffffffff the calculation overflows, leading the algorithm to believe that any window in the range 0x0000000 to 0xfffffff is available for allocation. This leads to a conflicting window allocation. Michal Ludvig reported this issue seen on his platform. The following patch fixes the problem and has been verified by Michal. I believe this bug has been there for ages. It got exposed by git commit 2bbc6942273b ("PCI : ability to relocate assigned pci-resources") Signed-off-by: Ram Pai <linuxram@us.ibm.com> Tested-by: Michal Ludvig <mludvig@logix.net.nz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 September 2011, 03:04:34 UTC
92bb062 Linus Torvalds 30 September 2011, 02:58:58 UTC Merge branch 'for-linus' of git://github.com/NewDreamNetwork/ceph-client * 'for-linus' of git://github.com/NewDreamNetwork/ceph-client: libceph: fix pg_temp mapping update libceph: fix pg_temp mapping calculation libceph: fix linger request requeuing libceph: fix parse options memory leak libceph: initialize ack_stamp to avoid unnecessary connection reset 30 September 2011, 02:58:58 UTC
7409b71 Linus Torvalds 30 September 2011, 02:29:45 UTC Merge branch 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus * 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus: [media] omap3isp: Fix build error in ispccdc.c [media] uvcvideo: Fix crash when linking entities [media] v4l: Make sure we hold a reference to the v4l2_device before using it [media] v4l: Fix use-after-free case in v4l2_device_release [media] uvcvideo: Set alternate setting 0 on resume if the bus has been reset [media] OMAP_VOUT: Fix build break caused by update_mode removal in DSS2 30 September 2011, 02:29:45 UTC
0ecdb12 Linus Torvalds 30 September 2011, 02:28:26 UTC Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6 * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] cio: fix cio_tpi ignoring adapter interrupts [S390] gmap: always up mmap_sem properly [S390] Do not clobber personality flags on exec 30 September 2011, 02:28:26 UTC
5fe858b Linus Torvalds 30 September 2011, 02:24:33 UTC Merge git://github.com/davem330/sparc * git://github.com/davem330/sparc: sparc64: Force the execute bit in OpenFirmware's translation entries. sparc: Make '-p' boot option meaningful again. sparc, exec: remove redundant addr_limit assignment sparc64: Future proof Niagara cpu detection. 30 September 2011, 02:24:33 UTC
8e8e500 Linus Torvalds 30 September 2011, 02:23:30 UTC Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux * 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux: drm/i915: FBC off for ironlake and older, otherwise on by default drm/i915: Enable SDVO hotplug interrupts for HDMI and DVI drm/i915: Enable dither whenever display bpc < frame buffer bpc 30 September 2011, 02:23:30 UTC
16fa42a Benjamin Herrenschmidt 29 September 2011, 05:57:01 UTC powerpc: Fix device-tree matching for Apple U4 bridge Apple Quad G5 has some oddity in it's device-tree which causes the new generic matching code to fail to relate nodes for PCI-E devices below U4 with their respective struct pci_dev. This breaks graphics on those machines among others. This fixes it using a quirk which copies the node pointer from the host bridge for the root complex, which makes the generic code work for the children afterward. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 September 2011, 02:22:40 UTC
b0f8437 wangyanqing 29 September 2011, 07:09:40 UTC bootup: move 'usermodehelper_enable()' a little earlier Commit d5767c53535a ("bootup: move 'usermodehelper_enable()' to the end of do_basic_setup()") moved 'usermodehelper_enable()' to end of do_basic_setup() to after the initcalls. But then I get failed to let uvesafb work on my computer, and lose the splash boot. So maybe we could start usermodehelper_enable a little early to make some task work that need eary init with the help of user mode. [ I would *really* prefer that initcalls not call into user space - even the real 'init' hasn't been execve'd yet, after all! But for uvesafb it really does look like we don't have much choice. I considered doing this when we mount the root filesystem, but depending on config options that is in multiple places. We could do the usermode helper enable as a rootfs_initcall().. So I'm just using wang yanqing's trivial patch. It's not wonderful, but it's simple and should work. We should revisit this some day, though. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 September 2011, 02:21:01 UTC
12d0d0d Oliver Hartkopp 29 September 2011, 19:33:47 UTC can bcm: fix incomplete tx_setup fix The commit aabdcb0b553b9c9547b1a506b34d55a764745870 ("can bcm: fix tx_setup off-by-one errors") fixed only a part of the original problem reported by Andre Naujoks. It turned out that the original code needed to be re-ordered to reduce complexity and to finally fix the reported frame counting issues. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net> 29 September 2011, 19:33:47 UTC
8e303f2 Jiri Olsa 29 September 2011, 15:05:08 UTC perf tools: Fix raw sample reading Wrong pointer is being passed for raw data sanity checking, when parsing sample event. This ends up with invalid event and perf record being stuck in __perf_session__process_events function during processing build IDs (process_buildids function). Following command hangs up in my setup: ./perf record -e raw_syscalls:sys_enter ls The fix is to use proper pointer to the raw data instead of the 'u' union. Reviewed-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1317308709-9474-2-git-send-email-jolsa@redhat.com Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 29 September 2011, 19:29:53 UTC
f4142cb David S. Miller 29 September 2011, 19:18:59 UTC sparc64: Force the execute bit in OpenFirmware's translation entries. In the OF 'translations' property, the template TTEs in the mappings never specify the executable bit. This is the case even though some of these mappings are for OF's code segment. Therefore, we need to force the execute bit on in every mapping. This problem can only really trigger on Niagara/sun4v machines and the history behind this is a little complicated. Previous to sun4v, the sun4u TTE entries lacked a hardware execute permission bit. So OF didn't have to ever worry about setting anything to handle executable pages. Any valid TTE loaded into the I-TLB would be respected by the chip. But sun4v Niagara chips have a real hardware enforced executable bit in their TTEs. So it has to be set or else the I-TLB throws an instruction access exception with type code 6 (protection violation). We've been extremely fortunate to not get bitten by this in the past. The best I can tell is that the OF's mappings for it's executable code were mapped using permanent locked mappings on sun4v in the past. Therefore, the fact that we didn't have the exec bit set in the OF translations we would use did not matter in practice. Thanks to Greg Onufer for helping me track this down. Signed-off-by: David S. Miller <davem@davemloft.net> 29 September 2011, 19:18:59 UTC
85a6488 Jonathan Lallinger 29 September 2011, 07:58:41 UTC RDSRDMA: Fix cleanup of rds_iw_mr_pool In the rds_iw_mr_pool struct the free_pinned field keeps track of memory pinned by free MRs. While this field is incremented properly upon allocation, it is never decremented upon unmapping. This would cause the rds_rdma module to crash the kernel upon unloading, by triggering the BUG_ON in the rds_iw_destroy_mr_pool function. This change keeps track of the MRs that become unpinned, so that free_pinned can be decremented appropriately. Signed-off-by: Jonathan Lallinger <jonathan@ogc.us> Signed-off-by: Steve Wise <swise@ogc.us> Signed-off-by: David S. Miller <davem@davemloft.net> 29 September 2011, 18:57:19 UTC
605b91c Roy.Li 28 September 2011, 19:51:54 UTC net: Documentation: Fix type of variables Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 September 2011, 18:57:19 UTC
95de86c Brian King 28 September 2011, 05:33:43 UTC ibmveth: Fix oops on request_irq failure If request_irq fails, the ibmveth driver will overwrite the rc and end up returning a successful rc on its open function, resulting in an oops later when a packet gets sent and buffers are not allocated due to the failed open. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 September 2011, 04:32:11 UTC
676a118 Yan, Zheng 25 September 2011, 02:21:30 UTC ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket ipv6_ac_list and ipv6_fl_list from listening socket are inadvertently shared with new socket created for connection. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 September 2011, 04:32:10 UTC
6482aa7 Divy Le Ray 24 September 2011, 06:11:31 UTC cxgb4: Fix EEH on IBM P7IOC Fix EEH recovery on new P Series platform by requesting fundamental reset. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 September 2011, 04:32:10 UTC
aabdcb0 Oliver Hartkopp 23 September 2011, 08:23:47 UTC can bcm: fix tx_setup off-by-one errors This patch fixes two off-by-one errors that canceled each other out. Checking for the same condition two times in bcm_tx_timeout_tsklet() reduced the count of frames to be sent by one. This did not show up the first time tx_setup is invoked as an additional frame is sent due to TX_ANNONCE. Invoking a second tx_setup on the same item led to a reduced (by 1) number of sent frames. Reported-by: Andre Naujoks <nautsch@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net> 29 September 2011, 04:32:09 UTC
d3c5217 Ian Campbell 21 September 2011, 22:08:26 UTC MAINTAINERS: tehuti: Alexander Indenbaum's address bounces I got: Generating server: Tehuti.onmicrosoft.com baum@tehutinetworks.net #< #5.1.1 smtp;550 5.1.1 RESOLVER.ADR.RecipNotFound; not found> #SMTP# Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Alexander Indenbaum <baum@tehutinetworks.net> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> 29 September 2011, 04:32:09 UTC
02715ed Richard Cochran 20 September 2011, 01:25:42 UTC dp83640: reduce driver noise The driver has two warning messages that might be triggered by normal use cases. When they appear, the messages give the impression of a never ending series of errors. This commit changes them to debug messages instead. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net> 29 September 2011, 04:32:04 UTC
f75159e Richard Cochran 20 September 2011, 01:25:41 UTC ptp: fix L2 event message recognition The IEEE 1588 standard defines two kinds of messages, event and general messages. Event messages require time stamping, and general do not. When using UDP transport, two separate ports are used for the two message types. The BPF designed to recognize event messages incorrectly classifies L2 general messages as event messages. This commit fixes the issue by extending the filter to check the message type field for L2 PTP packets. Event messages are be distinguished from general messages by testing the "general" bit. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Cc: <stable@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 29 September 2011, 04:32:03 UTC
d5767c5 Linus Torvalds 28 September 2011, 17:23:44 UTC bootup: move 'usermodehelper_enable()' to the end of do_basic_setup() Doing it just before starting to call into cpu_idle() made a sick kind of sense only because the original bug we fixed (see commit 288d5abec831: "Boot up with usermodehelper disabled") was about problems with some scheduler data structures not being initialized, and they had better be initialized at that point. But it really didn't make any other conceptual sense, and doing it after the initial "schedule()" call for the idle thread actually opened up a race: what if the main initialization thread did everything without needing to sleep, and got all the way into user land too? Without actually having scheduled back to the idle thread? Now, in normal circumstances that doesn't ever happen, but it looks like Richard Cochran triggered exactly that on his ARM IXP4xx machines: "I have some ARM IXP4xx based machines that use the two on chip MAC ports (aka NPEs). The NPE needs a firmware in order to function. Ever since the following commit [that 288d5abec831 one], it is no longer possible to bring up the interfaces during the init scripts." with a call trace showing an ioctl coming from user space. Richard says: "The init is busybox, and the startup script does mount, syslogd, and then ifup, so that all can go by quickly." The fix is to move the usermodehelper_enable() into the main 'init' thread, and just put it after we've done all our initcalls. By then, everything really should be up, but we've obviously not actually started the user-mode portion of init yet. Reported-and-tested-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 September 2011, 17:23:44 UTC
8adc8b3 Sage Weil 28 September 2011, 17:11:04 UTC libceph: fix pg_temp mapping update The incremental map updates have a record for each pg_temp mapping that is to be add/updated (len > 0) or removed (len == 0). The old code was written as if the updates were a complete enumeration; that was just wrong. Update the code to remove 0-length entries and drop the rbtree traversal. This avoids misdirected (and hung) requests that manifest as server errors like [WRN] client4104 10.0.1.219:0/275025290 misdirected client4104.1:129 0.1 to osd0 not [1,0] in e11/11 Signed-off-by: Sage Weil <sage@newdream.net> 28 September 2011, 17:13:35 UTC
782e182 Sage Weil 28 September 2011, 17:08:27 UTC libceph: fix pg_temp mapping calculation We need to apply the modulo pg_num calculation before looking up a pgid in the pg_temp mapping rbtree. This fixes pg_temp mappings, and fixes (some) misdirected requests that result in messages like [WRN] client4104 10.0.1.219:0/275025290 misdirected client4104.1:129 0.1 to osd0 not [1,0] in e11/11 on the server and stall make the client block without getting a reply (at least until the pg_temp mapping goes way, but that can take a long long time). Reorder calc_pg_raw() a bit to make more sense. Signed-off-by: Sage Weil <sage@newdream.net> 28 September 2011, 17:13:31 UTC
2ef7b45 Linus Torvalds 28 September 2011, 15:39:05 UTC Merge git://github.com/davem330/net * git://github.com/davem330/net: ipv6-multicast: Fix memory leak in IPv6 multicast. ipv6: check return value for dst_alloc net: check return value for dst_alloc ipv6-multicast: Fix memory leak in input path. bnx2x: add missing break in bnx2x_dcbnl_get_cap bnx2x: fix WOL by enablement PME in config space bnx2x: fix hw attention handling net: fix a typo in Documentation/networking/scaling.txt ath9k: Fix a dma warning/memory leak rtlwifi: rtl8192cu: Fix unitialized struct iwlagn: fix dangling scan request batman-adv: do_bcast has to be true for broadcast packets only cfg80211: Fix validation of AKM suites iwlegacy: do not use interruptible waits iwlegacy: fix command queue timeout ath9k_hw: Fix Rx DMA stuck for AR9003 chips 28 September 2011, 15:39:05 UTC
07117e3 Linus Torvalds 28 September 2011, 15:23:39 UTC Merge git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6 * git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6: [SCSI] 3w-9xxx: fix iommu_iova leak [SCSI] cxgb3i: convert cdev->l2opt to use rcu to prevent NULL dereference [SCSI] scsi: qla4xxx needs libiscsi.o [SCSI] libsas: fix failure to revalidate domain for anything but the first expander child. [SCSI] aacraid: reset should disable MSI interrupt 28 September 2011, 15:23:39 UTC
20ecb49 Guenter Roeck 24 September 2011, 22:27:04 UTC hwmon: (coretemp) Avoid leaving around dangling pointer Storing the struct temp_data pointer allocated from create_core_data() when returning an error has the potential of leaving around a pointer to freed memory. Reset it to NULL for error returns. Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> 28 September 2011, 15:19:21 UTC
0eb9782 Jean Delvare 28 September 2011, 15:11:00 UTC hwmon: (coretemp) Fixup platform device ID change With recent change "hwmon: (coretemp) don't use kernel assigned CPU number as platform device ID", the microcode check is now running on random CPU. Fix that by checking the microcode before creating the platform device rather than at probe time. Also avoid calling TO_PHYS_ID(cpu) twice in the same function, it's expensive. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jan Beulich <jbeulich@suse.com> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> 28 September 2011, 15:19:20 UTC
c54a06d Linus Torvalds 28 September 2011, 15:03:00 UTC Merge branch 'for-linus' of git://git.kernel.dk/linux-block * 'for-linus' of git://git.kernel.dk/linux-block: block: Free queue resources at blk_release_queue() 28 September 2011, 15:03:00 UTC
e689ec8 Linus Torvalds 28 September 2011, 15:01:05 UTC Merge branch 'writeback-for-linus' of git://github.com/fengguang/linux * 'writeback-for-linus' of git://github.com/fengguang/linux: writeback: show raw dirtied_when in trace writeback_single_inode 28 September 2011, 15:01:05 UTC
777eb1b Hannes Reinecke 28 September 2011, 14:07:01 UTC block: Free queue resources at blk_release_queue() A kernel crash is observed when a mounted ext3/ext4 filesystem is physically removed. The problem is that blk_cleanup_queue() frees up some resources eg by calling elevator_exit(), which are not checked for in normal operation. So we should rather move these calls to the destructor function blk_release_queue() as at that point all remaining references are gone. However, in doing so we have to ensure that any externally supplied queue_lock is disconnected as the driver might free up the lock after the call of blk_cleanup_queue(), Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> 28 September 2011, 14:07:01 UTC
b582ad8 David S. Miller 28 September 2011, 02:42:30 UTC Merge branch 'for-davem' of git://git.infradead.org/users/linville/wireless 28 September 2011, 02:42:30 UTC
a102a9e Linus Torvalds 27 September 2011, 22:48:34 UTC Linux 3.1-rc8 27 September 2011, 22:48:34 UTC
058e067 Linus Torvalds 27 September 2011, 22:46:21 UTC Merge branch 'for-linus' of git://github.com/tiwai/sound * 'for-linus' of git://github.com/tiwai/sound: ASoC: ssm2602: Re-enable oscillator after suspend ALSA: usb-audio: Check for possible chip NULL pointer before clearing probing flag ALSA: hda/realtek - Don't detect LO jack when identical with HP ALSA: hda/realtek - Avoid bogus HP-pin assignment ALSA: HDA: No power nids on 92HD93 ASoC: omap-mcbsp: Do not attempt to change DAI sysclk if stream is active 27 September 2011, 22:46:21 UTC
5711932 Linus Torvalds 27 September 2011, 22:41:32 UTC Merge branch 'pm-fixes' of git://github.com/rjwysocki/linux-pm * 'pm-fixes' of git://github.com/rjwysocki/linux-pm: PM / Clocks: Do not acquire a mutex under a spinlock 27 September 2011, 22:41:32 UTC
a8acfd8 John W. Linville 27 September 2011, 19:47:33 UTC Merge branch 'master' of git://git.infradead.org/users/linville/wireless into for-davem 27 September 2011, 19:47:33 UTC
67928c4 Ben Greear 23 September 2011, 13:11:01 UTC ipv6-multicast: Fix memory leak in IPv6 multicast. If reg_vif_xmit cannot find a routing entry, be sure to free the skb before returning the error. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2011, 19:34:00 UTC
fbe5818 Madalin Bucur 26 September 2011, 07:04:56 UTC ipv6: check return value for dst_alloc return value of dst_alloc must be checked before use Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2011, 19:32:06 UTC
d4cae56 Madalin Bucur 26 September 2011, 07:04:36 UTC net: check return value for dst_alloc return value of dst_alloc must be checked before use Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2011, 19:32:06 UTC
2015de5 Ben Greear 27 September 2011, 19:16:08 UTC ipv6-multicast: Fix memory leak in input path. Have to free the skb before returning if we fail the fib lookup. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2011, 19:16:08 UTC
29453f6 David S. Miller 27 September 2011, 19:05:47 UTC Merge branch 'batman-adv/maint' of git://git.open-mesh.org/linux-merge 27 September 2011, 19:05:47 UTC
a0babc8 Shmulik Ravid 22 September 2011, 02:33:33 UTC bnx2x: add missing break in bnx2x_dcbnl_get_cap Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2011, 19:04:24 UTC
f997790 Dmitry Kravkov 22 September 2011, 02:33:32 UTC bnx2x: fix WOL by enablement PME in config space Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2011, 19:04:24 UTC
f2eaeb5 Dmitry Kravkov 22 September 2011, 02:33:31 UTC bnx2x: fix hw attention handling Use register name to initialize attention mask Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2011, 19:04:24 UTC
e451e61 Jason Wang 27 September 2011, 17:26:27 UTC net: fix a typo in Documentation/networking/scaling.txt Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 September 2011, 17:26:27 UTC
0fac259 Takashi Iwai 27 September 2011, 16:21:41 UTC Merge branch 'fix/asoc' into for-linus 27 September 2011, 16:21:41 UTC
b6c8069 Linus Torvalds 27 September 2011, 15:12:33 UTC vfs: remove LOOKUP_NO_AUTOMOUNT flag That flag no longer makes sense, since we don't look up automount points as eagerly any more. Additionally, it turns out that the NO_AUTOMOUNT handling was buggy to begin with: it would avoid automounting even for cases where we really *needed* to do the automount handling, and could return ENOENT for autofs entries that hadn't been instantiated yet. With our new non-eager automount semantics, one discussion has been about adding a AT_AUTOMOUNT flag to vfs_fstatat (and thus the newfstatat() and fstatat64() system calls), but it's probably not worth it: you can always force at least directory automounting by simply adding the final '/' to the filename, which works for *all* of the stat family system calls, old and new. So AT_NO_AUTOMOUNT (and thus LOOKUP_NO_AUTOMOUNT) really were just a result of our bad default behavior. Acked-by: Ian Kent <raven@themaw.net> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 September 2011, 15:12:33 UTC
9058020 Lars-Peter Clausen 27 September 2011, 09:08:46 UTC ASoC: ssm2602: Re-enable oscillator after suspend Currently the the internal oscillator is powered down when entering BIAS_OFF state, but not re-enabled when going back to BIAS_STANDBY. As a result the CODEC will stop working after suspend if the internal oscillator is used to generate the sysclock signal. This patch fixes it by clearing the appropriate bit in the power down register when the CODEC is re-enabled. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org 27 September 2011, 10:20:38 UTC
815d405 Trond Myklebust 27 September 2011, 00:36:09 UTC VFS: Fix the remaining automounter semantics regressions The concensus seems to be that system calls such as stat() etc should not trigger an automount. Neither should the l* versions. This patch therefore adds a LOOKUP_AUTOMOUNT flag to tag those lookups that _should_ trigger an automount on the last path element. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> [ Edited to leave out the cases that are already covered by LOOKUP_OPEN, LOOKUP_DIRECTORY and LOOKUP_CREATE - all of which also fundamentally force automounting for their own reasons - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 September 2011, 02:16:46 UTC
d94c177 Linus Torvalds 27 September 2011, 00:44:55 UTC vfs pathname lookup: Add LOOKUP_AUTOMOUNT flag Since we've now turned around and made LOOKUP_FOLLOW *not* force an automount, we want to add the ability to force an automount event on lookup even if we don't happen to have one of the other flags that force it implicitly (LOOKUP_OPEN, LOOKUP_DIRECTORY, LOOKUP_PARENT..) Most cases will never want to use this, since you'd normally want to delay automounting as long as possible, which usually implies LOOKUP_OPEN (when we open a file or directory, we really cannot avoid the automount any more). But Trond argued sufficiently forcefully that at a minimum bind mounting a file and quotactl will want to force the automount lookup. Some other cases (like nfs_follow_remote_path()) could use it too, although LOOKUP_DIRECTORY would work there as well. This commit just adds the flag and logic, no users yet, though. It also doesn't actually touch the LOOKUP_NO_AUTOMOUNT flag that is related, and was made irrelevant by the same change that made us not follow on LOOKUP_FOLLOW. Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Ian Kent <raven@themaw.net> Cc: Jeff Layton <jlayton@redhat.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Greg KH <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 September 2011, 00:44:55 UTC
858b181 Linus Torvalds 26 September 2011, 23:29:26 UTC Merge branch 'samsung-fixes-3' of git://github.com/kgene/linux-samsung * 'samsung-fixes-3' of git://github.com/kgene/linux-samsung: ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driver ARM: S5PV210: Rename sclk_cam clocks for FIMC media driver ARM: S5P: fix incorrect loop iterator usage on gpio-interrupt ARM: S3C2443: Fix bit-reset in setrate of clk_armdiv 26 September 2011, 23:29:26 UTC
00aaad2 Sylwester Nawrocki 26 September 2011, 22:00:59 UTC ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driver The sclk_cam clocks are now controlled by the top level FIMC media device driver bound to "s5p-fimc-md" platform device. Rename sclk_cam clocks so they accessible by the corresponding driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 26 September 2011, 22:00:59 UTC
83427c2 Sylwester Nawrocki 26 September 2011, 22:00:53 UTC ARM: S5PV210: Rename sclk_cam clocks for FIMC media driver The sclk_cam clocks are now controlled by the top level FIMC media device driver bound to "s5p-fimc-md" platform device. Rename sclk_cam clocks so they accessible by the corresponding driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 26 September 2011, 22:00:53 UTC
ef82bdc Linus Torvalds 26 September 2011, 20:35:43 UTC Merge branch 'hwmon-for-linus' of git://github.com/groeck/linux * 'hwmon-for-linus' of git://github.com/groeck/linux: hwmon: (coretemp) remove struct platform_data * parameter from create_core_data() hwmon: (coretemp) constify static data hwmon: (coretemp) don't use kernel assigned CPU number as platform device ID hwmon: (ds620) Fix handling of negative temperatures hwmon: (w83791d) rename prototype parameter from 'register' to 'reg' hwmon: (coretemp) Don't use threshold registers for tempX_max hwmon: (coretemp) Let the user force TjMax hwmon: (coretemp) Drop duplicate function get_pkg_tjmax 26 September 2011, 20:35:43 UTC
231e58e Linus Torvalds 26 September 2011, 20:33:44 UTC Merge branch 'kvm-updates/3.1' of git://github.com/avikivity/kvm * 'kvm-updates/3.1' of git://github.com/avikivity/kvm: KVM: x86 emulator: fix Src2CL decode KVM: MMU: fix incorrect return of spte 26 September 2011, 20:33:44 UTC
a2b4910 Linus Torvalds 26 September 2011, 20:26:30 UTC Merge branch 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7099/1: futex: preserve oldval in SMP __futex_atomic_op ARM: dma-mapping: free allocated page if unable to map ARM: fix vmlinux.lds.S discarding sections ARM: nommu: fix warning with checksyscalls.sh ARM: 7091/1: errata: D-cache line maintenance operation by MVA may not succeed 26 September 2011, 20:26:30 UTC
ba54238 Mohammed Shafi Shajakhan 23 September 2011, 09:03:14 UTC ath9k: Fix a dma warning/memory leak proper dma_unmapping and freeing of skb's has to be done in the rx cleanup for EDMA chipsets when the device is unloaded and this also seems to address the following warning which shows up occasionally when the device is unloaded Call Trace: [<c0148cd2>] warn_slowpath_common+0x72/0xa0 [<c03b669c>] ? dma_debug_device_change+0x19c/0x200 [<c03b669c>] ? dma_debug_device_change+0x19c/0x200 [<c0148da3>] warn_slowpath_fmt+0x33/0x40 [<c03b669c>] dma_debug_device_change+0x19c/0x200 [<c0657f12>] notifier_call_chain+0x82/0xb0 [<c0171370>] __blocking_notifier_call_chain+0x60/0x90 [<c01713bf>] blocking_notifier_call_chain+0x1f/0x30 [<c044f594>] __device_release_driver+0xa4/0xc0 [<c044f647>] driver_detach+0x97/0xa0 [<c044e65c>] bus_remove_driver+0x6c/0xe0 [<c029af0b>] ? sysfs_addrm_finish+0x4b/0x60 [<c0450109>] driver_unregister+0x49/0x80 [<c0299f54>] ? sysfs_remove_file+0x14/0x20 [<c03c3ab2>] pci_unregister_driver+0x32/0x80 [<f92c2162>] ath_pci_exit+0x12/0x20 [ath9k] [<f92c8467>] ath9k_exit+0x17/0x36 [ath9k] [<c06523cd>] ? mutex_unlock+0xd/0x10 [<c018e27f>] sys_delete_module+0x13f/0x200 [<c02139bb>] ? sys_munmap+0x4b/0x60 [<c06547c5>] ? restore_all+0xf/0xf [<c0657a20>] ? spurious_fault+0xe0/0xe0 [<c01832f4>] ? trace_hardirqs_on_caller+0xf4/0x180 [<c065b863>] sysenter_do_call+0x12/0x38 ---[ end trace 16e1c1521c06bcf9 ]--- Mapped at: [<c03b7938>] debug_dma_map_page+0x48/0x120 [<f92ba3e8>] ath_rx_init+0x3f8/0x4b0 [ath9k] [<f92b5ae4>] ath9k_init_device+0x4c4/0x7b0 [ath9k] [<f92c2813>] ath_pci_probe+0x263/0x330 [ath9k] Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 26 September 2011, 18:55:51 UTC
831d854 Larry Finger 23 September 2011, 03:59:02 UTC rtlwifi: rtl8192cu: Fix unitialized struct Driver rtl8192cu assigns a new struct rtl_tcb_desc object, but fails to clear it. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [2.6.39+] Signed-off-by: John W. Linville <linville@tuxdriver.com> 26 September 2011, 18:55:50 UTC
6c80c39 Johannes Berg 22 September 2011, 21:59:04 UTC iwlagn: fix dangling scan request If iwl_scan_initiate() fails for any reason, priv->scan_request and priv->scan_vif are left dangling. This can lead to a crash later when iwl_bg_scan_completed() tries to run a pending scan request. In practice, this seems to be very rare due to the STATUS_SCANNING check earlier. That check, however, is wrong -- it should allow a scan to be queued when a reset/roc scan is going on. When a normal scan is already going on, a new one can't be issued by mac80211, so that code can be removed completely. I introduced this bug when adding off-channel support in commit 266af4c745952e9bebf687dd68af58df553cb59d. Cc: stable@kernel.org [3.0] Reported-by: Peng Yan <peng.yan@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 26 September 2011, 18:55:50 UTC
e8b364b Rafael J. Wysocki 26 September 2011, 17:40:23 UTC PM / Clocks: Do not acquire a mutex under a spinlock Commit b7ab83e (PM: Use spinlock instead of mutex in clock management functions) introduced a regression causing clocks_mutex to be acquired under a spinlock. This happens because pm_clk_suspend() and pm_clk_resume() call pm_clk_acquire() under pcd->lock, but pm_clk_acquire() executes clk_get() which causes clocks_mutex to be acquired. Similarly, __pm_clk_remove(), executed under pcd->lock, calls clk_put(), which also causes clocks_mutex to be acquired. To fix those problems make pm_clk_add() call pm_clk_acquire(), so that pm_clk_suspend() and pm_clk_resume() don't have to do that. Change pm_clk_remove() and pm_clk_destroy() to separate modifications of the pcd->clock_list list from the actual removal of PM clock entry objects done by __pm_clk_remove(). Reported-and-tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> 26 September 2011, 17:40:23 UTC
a681887 Peter Oberparleiter 26 September 2011, 14:40:35 UTC [S390] cio: fix cio_tpi ignoring adapter interrupts Ensure that adapter interrupts are correctly processed when they are retrieved using TEST PENDING INTERRUPTION. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 26 September 2011, 14:40:50 UTC
back to top