Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
b36f4be Linus Torvalds 18 August 2013, 21:36:53 UTC Linux 3.11-rc6 18 August 2013, 21:36:53 UTC
50e37cc Linus Torvalds 18 August 2013, 15:51:28 UTC Merge branch 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "This contains one patch to fix the return value of cpuset's cgroups interface function, which used to always return -ENODEV for the writes on the 'memory_pressure_enabled' file" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: fix the return value of cpuset_write_u64() 18 August 2013, 15:51:28 UTC
a08797e Linus Torvalds 17 August 2013, 17:43:19 UTC Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull jbd2 bug fixes from Ted Ts'o: "Two jbd2 bug fixes, one of which is a regression fix" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: Fix oops in jbd2_journal_file_inode() jbd2: Fix use after free after error in jbd2_journal_dirty_metadata() 17 August 2013, 17:43:19 UTC
215b28a Guenter Roeck 17 August 2013, 03:50:55 UTC s390: Fix broken build Fix this build error: In file included from fs/exec.c:61:0: arch/s390/include/asm/tlb.h:35:23: error: expected identifier or '(' before 'unsigned' arch/s390/include/asm/tlb.h:36:1: warning: no semicolon at end of struct or union [enabled by default] arch/s390/include/asm/tlb.h: In function 'tlb_gather_mmu': arch/s390/include/asm/tlb.h:57:5: error: 'struct mmu_gather' has no member named 'end' Broken due to commit 2b047252d0 ("Fix TLB gather virtual address range invalidation corner cases"). Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> [ Oh well. We had build testing for ppc amd um, but no s390 - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 17 August 2013, 04:16:37 UTC
e180383 Robin Holt 16 August 2013, 23:01:42 UTC MAINTAINERS: Change ownership for SGI specific modules. I have taken a different job. I am removing myself as maintainer of GRU. Dimitri will continue to maintain the SGI GRU driver, changing the XP/XPC/XPNET maintainer to Cliff Whickman, but leaving behind my personal email address to answer any questions about the design or operation of the XP family of drivers. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 17 August 2013, 03:45:07 UTC
a361293 Jan Kara 17 August 2013, 01:19:41 UTC jbd2: Fix oops in jbd2_journal_file_inode() Commit 0713ed0cde76438d05849f1537d3aab46e099475 added jbd2_journal_file_inode() call into ext4_block_zero_page_range(). However that function gets called from truncate path and thus inode needn't have jinode attached - that happens in ext4_file_open() but the file needn't be ever open since mount. Calling jbd2_journal_file_inode() without jinode attached results in the oops. We fix the problem by attaching jinode to inode also in ext4_truncate() and ext4_punch_hole() when we are going to zero out partial blocks. Reported-by: majianpeng <majianpeng@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> 17 August 2013, 01:19:41 UTC
2620bf0 Linus Torvalds 16 August 2013, 23:52:29 UTC Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm Pull ARM fixes from Russell King: "The usual collection of random fixes. Also some further fixes to the last set of security fixes, and some more from Will (which you may already have in a slightly different form)" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7807/1: kexec: validate CPU hotplug support ARM: 7812/1: rwlocks: retry trylock operation if strex fails on free lock ARM: 7811/1: locks: use early clobber in arch_spin_trylock ARM: 7810/1: perf: Fix array out of bounds access in armpmu_map_hw_event() ARM: 7809/1: perf: fix event validation for software group leaders ARM: Fix FIQ code on VIVT CPUs ARM: Fix !kuser helpers case ARM: Fix the world famous typo with is_gate_vma() 16 August 2013, 23:52:29 UTC
359d16c Linus Torvalds 16 August 2013, 23:49:06 UTC Merge branch 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fixes from Geert Uytterhoeven: "These are two critical fixes, needed by distro kernels, and thus also destined for stable: - The do_div() commit fixes a crash in mounting btrfs volumes, which was a regression from 3.2, - The ARAnyM fix allows to have NatFeat drivers as loadable modules, which is needed for initrds" * 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Truncate base in do_div() m68k/atari: ARAnyM - Fix NatFeat module support 16 August 2013, 23:49:06 UTC
0f7dd1a Linus Torvalds 16 August 2013, 17:00:18 UTC Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux Pull clock controller fixes from Michael Turquette: "Two small fixes for the Zynq clock controller introduced in 3.11-rc1 and another Exynos clock patch which fixes a regression that prevents the video pipeline from functioning on that platform" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: exynos4: Add CLK_GET_RATE_NOCACHE flag for the Exynos4x12 ISP clocks clk/zynq/clkc: Add CLK_SET_RATE_PARENT flag to ethernet muxes clk/zynq/clkc: Add dedicated spinlock for the SWDT 16 August 2013, 17:00:18 UTC
2d2843e Linus Torvalds 16 August 2013, 16:59:00 UTC Merge tag 'pm-3.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "The removal of delayed_work_pending() checks from kernel/power/qos.c done in 3.9 introduced a deadlock in pm_qos_work_fn(). Fix from Stephen Boyd" * tag 'pm-3.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / QoS: Fix workqueue deadlock when using pm_qos_update_request_timeout() 16 August 2013, 16:59:00 UTC
f43c606 Linus Torvalds 16 August 2013, 16:58:21 UTC Merge tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This batch contains a few USB audio fixes, a couple of HD-audio quirks, various small ASoC driver fixes in addition to an ASoC core fix that may lead to memory corruption. Unfortunately slightly more volume than the previous pull request, but all are reasonable regression fixes" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add a fixup for Gateway LT27 ASoC: tegra: fix Tegra30 I2S capture parameter setup ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525 ALSA: hda - Fix missing mute controls for CX5051 ALSA: usb-audio: fix automatic Roland/Yamaha MIDI detection ALSA: 6fire: make buffers DMA-able (midi) ALSA: 6fire: make buffers DMA-able (pcm) ALSA: hda - Add pinfix for LG LW25 laptop ASoC: cs42l52: Add new TLV for Beep Volume ASoC: cs42l52: Reorder Min/Max and update to SX_TLV for Beep Volume ASoC: dapm: Fix empty list check in dapm_new_mux() ASoC: sgtl5000: fix buggy 'Capture Attenuate Switch' control ASoC: sgtl5000: prevent playback to be muted when terminating concurrent capture 16 August 2013, 16:58:21 UTC
89cb9ae Linus Torvalds 16 August 2013, 16:57:38 UTC Merge tag 'usb-3.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 3.11-rc6 that have accumulated. Nothing huge, a EHCI fix that solves a much-reported audio USB problem, some usb-serial driver endian fixes and other minor fixes, a wireless USB oops fix, and two new quirks" * tag 'usb-3.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: keyspan: fix null-deref at disconnect and release USB: mos7720: fix broken control requests usb: add two quirky touchscreen USB: ti_usb_3410_5052: fix big-endian firmware handling USB: adutux: fix big-endian device-type reporting USB: usbtmc: fix big-endian probe of Rigol devices USB: mos7840: fix big-endian probe USB-Serial: Fix error handling of usb_wwan wusbcore: fix kernel panic when disconnecting a wireless USB->serial device USB: EHCI: accept very late isochronous URBs 16 August 2013, 16:57:38 UTC
ddea368 Linus Torvalds 16 August 2013, 16:35:29 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix SKB leak in 8139cp, from Dave Jones. 2) Fix use of *_PAGES interfaces with mlx5 firmware, from Moshe Lazar. 3) RCU conversion of macvtap introduced two races, fixes by Eric Dumazet 4) Synchronize statistic flows in bnx2x driver to prevent corruption, from Dmitry Kravkov 5) Undo optimization in IP tunneling, we were using the inner IP header in some cases to inherit the IP ID, but that isn't correct in some circumstances. From Pravin B Shelar 6) Use correct struct size when parsing netlink attributes in rtnl_bridge_getlink(). From Asbjoern Sloth Toennesen 7) Length verifications in tun_get_user() are bogus, from Weiping Pan and Dan Carpenter 8) Fix bad merge resolution during 3.11 networking development in openvswitch, albeit a harmless one which added some unreachable code. From Jesse Gross 9) Wrong size used in flexible array allocation in openvswitch, from Pravin B Shelar 10) Clear out firmware capability flags the be2net driver isn't ready to handle yet, from Sarveshwar Bandi 11) Revert DMA mapping error checking addition to cxgb3 driver, it's buggy. From Alexey Kardashevskiy 12) Fix regression in packet scheduler rate limiting when working with a link layer of ATM. From Jesper Dangaard Brouer 13) Fix several errors in TCP Cubic congestion control, in particular overflow errors in timestamp calculations. From Eric Dumazet and Van Jacobson 14) In ipv6 routing lookups, we need to backtrack if subtree traversal don't result in a match. From Hannes Frederic Sowa 15) ipgre_header() returns incorrect packet offset. Fix from Timo Teräs 16) Get "low latency" out of the new MIB counter names. From Eliezer Tamir 17) State check in ndo_dflt_fdb_del() is inverted, from Sridhar Samudrala 18) Handle TCP Fast Open properly in netfilter conntrack, from Yuchung Cheng 19) Wrong memcpy length in pcan_usb driver, from Stephane Grosjean 20) Fix dealock in TIPC, from Wang Weidong and Ding Tianhong 21) call_rcu() call to destroy SCTP transport is done too early and might result in an oops. From Daniel Borkmann 22) Fix races in genetlink family dumps, from Johannes Berg 23) Flags passed into macvlan by the user need to be validated properly, from Michael S Tsirkin 24) Fix skge build on 32-bit, from Stephen Hemminger 25) Handle malformed TCP headers properly in xt_TCPMSS, from Pablo Neira Ayuso 26) Fix handling of stacked vlans in vlan_dev_real_dev(), from Nikolay Aleksandrov 27) Eliminate MTU calculation overflows in esp{4,6}, from Daniel Borkmann 28) neigh_parms need to be setup before calling the ->ndo_neigh_setup() method. From Veaceslav Falico 29) Kill out-of-bounds prefetch in fib_trie, from Eric Dumazet 30) Don't dereference MLD query message if the length isn't value in the bridge multicast code, from Linus Lüssing 31) Fix VXLAN IGMP join regression due to an inverted check, from Cong Wang * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (70 commits) net/mlx5_core: Support MANAGE_PAGES and QUERY_PAGES firmware command changes tun: signedness bug in tun_get_user() qlcnic: Fix diagnostic interrupt test for 83xx adapters qlcnic: Fix beacon state return status handling qlcnic: Fix set driver version command net: tg3: fix NULL pointer dereference in tg3_io_error_detected and tg3_io_slot_reset net_sched: restore "linklayer atm" handling drivers/net/ethernet/via/via-velocity.c: update napi implementation Revert "cxgb3: Check and handle the dma mapping errors" be2net: Clear any capability flags that driver is not interested in. openvswitch: Reset tunnel key between input and output. openvswitch: Use correct type while allocating flex array. openvswitch: Fix bad merge resolution. tun: compare with 0 instead of total_len rtnetlink: rtnl_bridge_getlink: Call nlmsg_find_attr() with ifinfomsg header ethernet/arc/arc_emac - fix NAPI "work > weight" warning ip_tunnel: Do not use inner ip-header-id for tunnel ip-header-id. bnx2x: prevent crash in shutdown flow with CNIC bnx2x: fix PTE write access error bnx2x: fix memory leak in VF ... 16 August 2013, 16:35:29 UTC
2b04725 Linus Torvalds 15 August 2013, 18:42:25 UTC Fix TLB gather virtual address range invalidation corner cases Ben Tebulin reported: "Since v3.7.2 on two independent machines a very specific Git repository fails in 9/10 cases on git-fsck due to an SHA1/memory failures. This only occurs on a very specific repository and can be reproduced stably on two independent laptops. Git mailing list ran out of ideas and for me this looks like some very exotic kernel issue" and bisected the failure to the backport of commit 53a59fc67f97 ("mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT"). That commit itself is not actually buggy, but what it does is to make it much more likely to hit the partial TLB invalidation case, since it introduces a new case in tlb_next_batch() that previously only ever happened when running out of memory. The real bug is that the TLB gather virtual memory range setup is subtly buggered. It was introduced in commit 597e1c3580b7 ("mm/mmu_gather: enable tlb flush range in generic mmu_gather"), and the range handling was already fixed at least once in commit e6c495a96ce0 ("mm: fix the TLB range flushed when __tlb_remove_page() runs out of slots"), but that fix was not complete. The problem with the TLB gather virtual address range is that it isn't set up by the initial tlb_gather_mmu() initialization (which didn't get the TLB range information), but it is set up ad-hoc later by the functions that actually flush the TLB. And so any such case that forgot to update the TLB range entries would potentially miss TLB invalidates. Rather than try to figure out exactly which particular ad-hoc range setup was missing (I personally suspect it's the hugetlb case in zap_huge_pmd(), which didn't have the same logic as zap_pte_range() did), this patch just gets rid of the problem at the source: make the TLB range information available to tlb_gather_mmu(), and initialize it when initializing all the other tlb gather fields. This makes the patch larger, but conceptually much simpler. And the end result is much more understandable; even if you want to play games with partial ranges when invalidating the TLB contents in chunks, now the range information is always there, and anybody who doesn't want to bother with it won't introduce subtle bugs. Ben verified that this fixes his problem. Reported-bisected-and-tested-by: Ben Tebulin <tebulin@googlemail.com> Build-testing-by: Stephen Rothwell <sfr@canb.auug.org.au> Build-testing-by: Richard Weinberger <richard.weinberger@gmail.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 August 2013, 15:52:46 UTC
1801928 Takashi Iwai 16 August 2013, 06:17:05 UTC ALSA: hda - Add a fixup for Gateway LT27 Gateway LT27 needs a fixup for the inverted digital mic. Reported-by: "Nathanael D. Noblet" <nathanael@gnat.ca> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 16 August 2013, 06:17:05 UTC
0a324f3 Moshe Lazer 14 August 2013, 14:46:48 UTC net/mlx5_core: Support MANAGE_PAGES and QUERY_PAGES firmware command changes In the previous QUERY_PAGES command version we used one command to get the required amount of boot, init and post init pages. The new version uses the op_mod field to specify whether the query is for the required amount of boot, init or post init pages. In addition the output field size for the required amount of pages increased from 16 to 32 bits. In MANAGE_PAGES command the input_num_entries and output_num_entries fields sizes changed from 16 to 32 bits and the PAS tables offset changed to 0x10. In the pages request event the num_pages field also changed to 32 bits. In the HCA-capabilities-layout the size and location of max_qp_mcg field has been changed to support 24 bits. This patch isn't compatible with firmware versions < 5; however, it turns out that the first GA firmware we will publish will not support previous versions so this should be OK. Signed-off-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 August 2013, 22:42:57 UTC
15718ea Dan Carpenter 15 August 2013, 12:52:57 UTC tun: signedness bug in tun_get_user() The recent fix d9bf5f1309 "tun: compare with 0 instead of total_len" is not totally correct. Because "len" and "sizeof()" are size_t type, that means they are never less than zero. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 August 2013, 21:51:23 UTC
d1fcc17 Manish Chopra 15 August 2013, 12:29:29 UTC qlcnic: Fix diagnostic interrupt test for 83xx adapters o Do not allow interrupt test when adapter is resetting. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 August 2013, 21:35:01 UTC
482b3c3 Sucheta Chakraborty 15 August 2013, 12:29:28 UTC qlcnic: Fix beacon state return status handling o Driver was misinterpreting the return status for beacon state query leading to incorrect interpretation of beacon state and logging an error message for successful status. Fixed the driver to properly interpret the return status. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 August 2013, 21:35:00 UTC
24866d1 Himanshu Madhani 15 August 2013, 12:29:27 UTC qlcnic: Fix set driver version command Driver was issuing set driver version command through all functions in the adapter. Fix the driver to issue set driver version once per adapter, through function 0. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 August 2013, 21:35:00 UTC
6829309 Daniel Borkmann 13 August 2013, 18:45:13 UTC net: tg3: fix NULL pointer dereference in tg3_io_error_detected and tg3_io_slot_reset Commit d8af4dfd8 ("net/tg3: Fix kernel crash") introduced a possible NULL pointer dereference in tg3 driver when !netdev || !netif_running(netdev) condition is met and netdev is NULL. Then, the jump to the 'done' label calls dev_close() with a netdevice that is NULL. Therefore, only call dev_close() when we have a netdevice, but one that is not running. [ Add the same checks in tg3_io_slot_reset() per Gavin Shan - by Nithin Nayak Sujir ] Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Gavin Shan <shangw@linux.vnet.ibm.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 August 2013, 20:41:20 UTC
f85a659 Takashi Iwai 15 August 2013, 18:43:46 UTC Merge tag 'asoc-v3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.11 A few driver specific fixes here plus one core fix for a memory corruption issue in DAPM initialisation which could lead to crashes. 15 August 2013, 18:43:46 UTC
44ffb69 Mark Brown 15 August 2013, 10:37:54 UTC Merge remote-tracking branch 'asoc/fix/tegra' into asoc-linus 15 August 2013, 10:37:54 UTC
f6938bb Mark Brown 15 August 2013, 10:37:53 UTC Merge remote-tracking branch 'asoc/fix/sgtl5000' into asoc-linus 15 August 2013, 10:37:53 UTC
14388a6 Mark Brown 15 August 2013, 10:37:53 UTC Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linus 15 August 2013, 10:37:53 UTC
c200d88 Mark Brown 15 August 2013, 10:37:52 UTC Merge remote-tracking branch 'asoc/fix/cs42l52' into asoc-linus 15 August 2013, 10:37:52 UTC
c90c0d7 Stephen Warren 14 August 2013, 20:24:16 UTC ASoC: tegra: fix Tegra30 I2S capture parameter setup The Tegra30 I2S driver was writing the AHUB interface parameters to the playback path register rather than the capture path register. This caused the capture parameters not to be configured at all, so if capturing using non-HW-default parameters (e.g. 16-bit stereo rather than 8-bit mono) the audio would be corrupted. With this fixed, audio capture from an analog microphone works correctly on the Cardhu board. Cc: stable@vger.kernel.org Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org> 15 August 2013, 10:07:53 UTC
8a8e3d8 Jesper Dangaard Brouer 14 August 2013, 21:47:11 UTC net_sched: restore "linklayer atm" handling commit 56b765b79 ("htb: improved accuracy at high rates") broke the "linklayer atm" handling. tc class add ... htb rate X ceil Y linklayer atm The linklayer setting is implemented by modifying the rate table which is send to the kernel. No direct parameter were transferred to the kernel indicating the linklayer setting. The commit 56b765b79 ("htb: improved accuracy at high rates") removed the use of the rate table system. To keep compatible with older iproute2 utils, this patch detects the linklayer by parsing the rate table. It also supports future versions of iproute2 to send this linklayer parameter to the kernel directly. This is done by using the __reserved field in struct tc_ratespec, to convey the choosen linklayer option, but only using the lower 4 bits of this field. Linklayer detection is limited to speeds below 100Mbit/s, because at high rates the rtab is gets too inaccurate, so bad that several fields contain the same values, this resembling the ATM detect. Fields even start to contain "0" time to send, e.g. at 1000Mbit/s sending a 96 bytes packet cost "0", thus the rtab have been more broken than we first realized. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 August 2013, 08:43:08 UTC
09a8f03 David S. Miller 15 August 2013, 08:41:10 UTC Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch Jesse Gross says: ==================== Three bug fixes that are fairly small either way but resolve obviously incorrect code. For net/3.11. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 15 August 2013, 08:41:10 UTC
2fdac01 Julia Lawall 14 August 2013, 14:26:53 UTC drivers/net/ethernet/via/via-velocity.c: update napi implementation Drivers supporting NAPI should use a NAPI-specific function for receiving packets. Hence netif_rx is changed to netif_receive_skb. Furthermore netif_napi_del should be used in the probe and remove function to clean up the NAPI resource information. Thanks to Francois Romieu, David Shwatrz and Rami Rosen for their help on this patch. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 15 August 2013, 08:38:34 UTC
728e2cc Alexey Kardashevskiy 14 August 2013, 09:19:01 UTC Revert "cxgb3: Check and handle the dma mapping errors" This reverts commit f83331bab149e29fa2c49cf102c0cd8c3f1ce9f9. As the tests PPC64 (powernv platform) show, IOMMU pages are leaking when transferring big amount of small packets (<=64 bytes), "ping -f" and waiting for 15 seconds is the simplest way to confirm the bug. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Santosh Rastapur <santosh@chelsio.com> Cc: Jay Fenlason <fenlason@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Divy Le ray <divy@chelsio.com> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 August 2013, 08:23:32 UTC
3da988c Sarveshwar Bandi 14 August 2013, 07:51:47 UTC be2net: Clear any capability flags that driver is not interested in. It is possible for some versions of firmware to advertise capabilities that driver is not ready to handle. This may lead to controller stall. Since the driver is interested only in subset of flags, clearing the rest. Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 August 2013, 08:22:12 UTC
36bf5cc Jesse Gross 14 August 2013, 22:50:36 UTC openvswitch: Reset tunnel key between input and output. It doesn't make sense to output a tunnel packet using the same parameters that it was received with since that will generally just result in the packet going back to us. As a result, userspace assumes that the tunnel key is cleared when transitioning through the switch. In the majority of cases this doesn't matter since a packet is either going to a tunnel port (in which the key is overwritten with new values) or to a non-tunnel port (in which case the key is ignored). However, it's theoreticaly possible that userspace could rely on the documented behavior, so this corrects it. Signed-off-by: Jesse Gross <jesse@nicira.com> 14 August 2013, 22:50:36 UTC
42415c9 Pravin B Shelar 30 July 2013, 22:44:14 UTC openvswitch: Use correct type while allocating flex array. Flex array is used to allocate hash buckets which is type struct hlist_head, but we use `struct hlist_head *` to calculate array size. Since hlist_head is of size pointer it works fine. Following patch use correct type. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> 14 August 2013, 22:48:17 UTC
30444e9 Jesse Gross 13 May 2013, 15:41:06 UTC openvswitch: Fix bad merge resolution. git silently included an extra hunk in vport_cmd_set() during automatic merging. This code is unreachable so it does not actually introduce a problem but it is clearly incorrect. Signed-off-by: Jesse Gross <jesse@nicira.com> 14 August 2013, 22:48:02 UTC
ff8a43c Johan Hovold 13 August 2013, 11:27:35 UTC USB: keyspan: fix null-deref at disconnect and release Make sure to fail properly if the device is not accepted during attach in order to avoid null-pointer derefs (of missing interface private data) at disconnect or release. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 14 August 2013, 19:49:27 UTC
ef6c8c1 Johan Hovold 13 August 2013, 11:27:34 UTC USB: mos7720: fix broken control requests The parallel-port code of the drivers used a stack allocated control-request buffer for asynchronous (and possibly deferred) control requests. This not only violates the no-DMA-from-stack requirement but could also lead to corrupt control requests being submitted. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 14 August 2013, 19:49:27 UTC
304ab4a Oliver Neukum 14 August 2013, 09:01:46 UTC usb: add two quirky touchscreen These devices tend to become unresponsive after S3 Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 14 August 2013, 19:49:27 UTC
f1d6e17 Linus Torvalds 14 August 2013, 17:04:43 UTC Merge branch 'akpm' (patches from Andrew Morton) Merge a bunch of fixes from Andrew Morton. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: fs/proc/task_mmu.c: fix buffer overflow in add_page_map() arch: *: Kconfig: add "kernel/Kconfig.freezer" to "arch/*/Kconfig" ocfs2: fix null pointer dereference in ocfs2_dir_foreach_blk_id() x86 get_unmapped_area(): use proper mmap base for bottom-up direction ocfs2: fix NULL pointer dereference in ocfs2_duplicate_clusters_by_page ocfs2: Revert 40bd62e to avoid regression in extended allocation drivers/rtc/rtc-stmp3xxx.c: provide timeout for potentially endless loop polling a HW bit hugetlb: fix lockdep splat caused by pmd sharing aoe: adjust ref of head for compound page tails microblaze: fix clone syscall mm: save soft-dirty bits on file pages mm: save soft-dirty bits on swapped pages memcg: don't initialize kmem-cache destroying work for root caches 14 August 2013, 17:04:43 UTC
ea077b1 Andreas Schwab 09 August 2013, 13:14:08 UTC m68k: Truncate base in do_div() Explicitly truncate the second operand of do_div() to 32 bits to guard against bogus code calling it with a 64-bit divisor. [Thorsten] After upgrading from 3.2 to 3.10, mounting a btrfs volume fails with: btrfs: setting nodatacow, compression disabled btrfs: enabling auto recovery btrfs: disk space caching is enabled *** ZERO DIVIDE *** FORMAT=2 Current process id is 722 BAD KERNEL TRAP: 00000000 Modules linked in: evdev mac_hid ext4 crc16 jbd2 mbcache btrfs xor lzo_compress zlib_deflate raid6_pq crc32c libcrc32c PC: [<319535b2>] __btrfs_map_block+0x11c/0x119a [btrfs] SR: 2000 SP: 30c1fab4 a2: 30f0faf0 d0: 00000000 d1: 00001000 d2: 00000000 d3: 00000000 d4: 00010000 d5: 00000000 a0: 3085c72c a1: 3085c72c Process mount (pid: 722, task=30f0faf0) Frame format=2 instr addr=319535ae Stack from 30c1faec: 00000000 00000020 00000000 00001000 00000000 01401000 30253928 300ffc00 00a843ac 3026f640 00000000 00010000 0009e250 00d106c0 00011220 00000000 00001000 301c6830 0009e32a 000000ff 00000009 3085c72c 00000000 00000000 30c1fd14 00000000 00000020 00000000 30c1fd14 0009e26c 00000020 00000003 00000000 0009dd8a 300b0b6c 30253928 00a843ac 00001000 00000000 00000000 0000a008 3194e76a 30253928 00a843ac 00001000 00000000 00000000 00000002 Call Trace: [<00001000>] kernel_pg_dir+0x0/0x1000 [...] Code: 222e ff74 2a2e ff5c 2c2e ff60 4c45 1402 <2d40> ff64 2d41 ff68 2205 4c2e 1800 ff68 4c04 0800 2041 d1c0 2206 4c2e 1400 ff68 [Geert] As diagnosed by Andreas, fs/btrfs/volumes.c:__btrfs_map_block() calls do_div(stripe_nr, stripe_len); with stripe_len u64, while do_div() assumes the divisor is a 32-bit number. Due to the lack of truncation in the m68k-specific implementation of do_div(), the division is performed using the upper 32-bit word of stripe_len, which is zero. This was introduced by commit 53b381b3abeb86f12787a6c40fee9b2f71edc23b ("Btrfs: RAID5 and RAID6"), which changed the divisor from map->stripe_len (struct map_lookup.stripe_len is int) to a 64-bit temporary. Reported-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Tested-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org 14 August 2013, 09:46:30 UTC
e8184e1 Geert Uytterhoeven 25 July 2013, 22:08:25 UTC m68k/atari: ARAnyM - Fix NatFeat module support As pointed out by Andreas Schwab, pointers passed to ARAnyM NatFeat calls should be physical addresses, not virtual addresses. Fortunately on Atari, physical and virtual kernel addresses are the same, as long as normal kernel memory is concerned, so this usually worked fine without conversion. But for modules, pointers to literal strings are located in vmalloc()ed memory. Depending on the version of ARAnyM, this causes the nf_get_id() call to just fail, or worse, crash ARAnyM itself with e.g. Gotcha! Illegal memory access. Atari PC = $968c This is a big issue for distro kernels, who want to have all drivers as loadable modules in an initrd. Add a wrapper for nf_get_id() that copies the literal to the stack to work around this issue. Reported-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org 14 August 2013, 09:46:30 UTC
d9bf5f1 Weiping Pan 13 August 2013, 13:46:56 UTC tun: compare with 0 instead of total_len Since we set "len = total_len" in the beginning of tun_get_user(), so we should compare the new len with 0, instead of total_len, or the if statement always returns false. Signed-off-by: Weiping Pan <wpan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 14 August 2013, 02:29:08 UTC
3e805ad Asbjoern Sloth Toennesen 12 August 2013, 16:30:09 UTC rtnetlink: rtnl_bridge_getlink: Call nlmsg_find_attr() with ifinfomsg header Fix the iproute2 command `bridge vlan show`, after switching from rtgenmsg to ifinfomsg. Let's start with a little history: Feb 20: Vlad Yasevich got his VLAN-aware bridge patchset included in the 3.9 merge window. In the kernel commit 6cbdceeb, he added attribute support to bridge GETLINK requests sent with rtgenmsg. Mar 6th: Vlad got this iproute2 reference implementation of the bridge vlan netlink interface accepted (iproute2 9eff0e5c) Apr 25th: iproute2 switched from using rtgenmsg to ifinfomsg (63338dca) http://patchwork.ozlabs.org/patch/239602/ http://marc.info/?t=136680900700007 Apr 28th: Linus released 3.9 Apr 30th: Stephen released iproute2 3.9.0 The `bridge vlan show` command haven't been working since the switch to ifinfomsg, or in a released version of iproute2. Since the kernel side only supports rtgenmsg, which iproute2 switched away from just prior to the iproute2 3.9.0 release. I haven't been able to find any documentation, about neither rtgenmsg nor ifinfomsg, and in which situation to use which, but kernel commit 88c5b5ce seams to suggest that ifinfomsg should be used. Fixing this in kernel will break compatibility, but I doubt that anybody have been using it due to this bug in the user space reference implementation, at least not without noticing this bug. That said the functionality is still fully functional in 3.9, when reversing iproute2 commit 63338dca. This could also be fixed in iproute2, but thats an ugly patch that would reintroduce rtgenmsg in iproute2, and from searching in netdev it seams like rtgenmsg usage is discouraged. I'm assuming that the only reason that Vlad implemented the kernel side to use rtgenmsg, was because iproute2 was using it at the time. Signed-off-by: Asbjoern Sloth Toennesen <ast@fiberby.net> Reviewed-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 14 August 2013, 02:09:29 UTC
8c82962 yonghua zheng 13 August 2013, 23:01:03 UTC fs/proc/task_mmu.c: fix buffer overflow in add_page_map() Recently we met quite a lot of random kernel panic issues after enabling CONFIG_PROC_PAGE_MONITOR. After debuggind we found this has something to do with following bug in pagemap: In struct pagemapread: struct pagemapread { int pos, len; pagemap_entry_t *buffer; bool v2; }; pos is number of PM_ENTRY_BYTES in buffer, but len is the size of buffer, it is a mistake to compare pos and len in add_page_map() for checking buffer is full or not, and this can lead to buffer overflow and random kernel panic issue. Correct len to be total number of PM_ENTRY_BYTES in buffer. [akpm@linux-foundation.org: document pagemapread.pos and .len units, fix PM_ENTRY_BYTES definition] Signed-off-by: Yonghua Zheng <younghua.zheng@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2013, 00:57:50 UTC
57a1a19 Chen Gang 13 August 2013, 23:01:02 UTC arch: *: Kconfig: add "kernel/Kconfig.freezer" to "arch/*/Kconfig" All architectures include "kernel/Kconfig.freezer" except three left, so let them include it too, or 'allmodconfig' will report error. The related errors: (with allmodconfig for openrisc): CC kernel/cgroup_freezer.o kernel/cgroup_freezer.c: In function 'freezer_css_online': kernel/cgroup_freezer.c:133:15: error: 'system_freezing_cnt' undeclared (first use in this function) kernel/cgroup_freezer.c:133:15: note: each undeclared identifier is reported only once for each function it appears in kernel/cgroup_freezer.c: In function 'freezer_css_offline': kernel/cgroup_freezer.c:157:15: error: 'system_freezing_cnt' undeclared (first use in this function) kernel/cgroup_freezer.c: In function 'freezer_attach': kernel/cgroup_freezer.c:200:4: error: implicit declaration of function 'freeze_task' kernel/cgroup_freezer.c: In function 'freezer_apply_state': kernel/cgroup_freezer.c:371:16: error: 'system_freezing_cnt' undeclared (first use in this function) Signed-off-by: Chen Gang <gang.chen@asianux.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2013, 00:57:49 UTC
d6394b5 Jeff Liu 13 August 2013, 23:01:01 UTC ocfs2: fix null pointer dereference in ocfs2_dir_foreach_blk_id() Fix a NULL pointer deference while removing an empty directory, which was introduced by commit 3704412bdbf3 ("[readdir] convert ocfs2"). BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 6da85067 PUD 6da89067 PMD 0 Oops: 0010 [#1] SMP CPU: 0 PID: 6564 Comm: rmdir Tainted: G O 3.11.0-rc1 #4 RIP: 0010:[<0000000000000000>] [< (null)>] (null) Call Trace: ocfs2_dir_foreach+0x49/0x50 [ocfs2] ocfs2_empty_dir+0x12c/0x3e0 [ocfs2] ocfs2_unlink+0x56e/0xc10 [ocfs2] vfs_rmdir+0xd5/0x140 do_rmdir+0x1cb/0x1e0 SyS_rmdir+0x16/0x20 system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [< (null)>] (null) RSP <ffff88006daddc10> CR2: 0000000000000000 [dan.carpenter@oracle.com: fix pointer math] Signed-off-by: Jie Liu <jeff.liu@oracle.com> Reported-by: David Weber <wb@munzinger.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2013, 00:57:49 UTC
df54d6f Radu Caragea 13 August 2013, 23:00:59 UTC x86 get_unmapped_area(): use proper mmap base for bottom-up direction When the stack is set to unlimited, the bottomup direction is used for mmap-ings but the mmap_base is not used and thus effectively renders ASLR for mmapings along with PIE useless. Cc: Michel Lespinasse <walken@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Sendroiu <molecula2788@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2013, 00:57:49 UTC
c7dd339 Tiger Yang 13 August 2013, 23:00:58 UTC ocfs2: fix NULL pointer dereference in ocfs2_duplicate_clusters_by_page Since ocfs2_cow_file_pos will invoke ocfs2_refcount_icow with a NULL as the struct file pointer, it finally result in a null pointer dereference in ocfs2_duplicate_clusters_by_page. This patch replace file pointer with inode pointer in cow_duplicate_clusters to fix this issue. [jeff.liu@oracle.com: rebased patch against linux-next tree] Signed-off-by: Tiger Yang <tiger.yang@oracle.com> Signed-off-by: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Tao Ma <tm@tao.ma> Tested-by: David Weber <wb@munzinger.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2013, 00:57:49 UTC
6115ea2 Jie Liu 13 August 2013, 23:00:57 UTC ocfs2: Revert 40bd62e to avoid regression in extended allocation Revert commit 40bd62eb7fb8 ("fs/ocfs2/journal.h: add bits_wanted while calculating credits in ocfs2_calc_extend_credits"). Unfortunately this change broke fallocate even if there is insufficient disk space for the preallocation, which is a serious problem. # df -h /dev/sda8 22G 1.2G 21G 6% /ocfs2 # fallocate -o 0 -l 200M /ocfs2/testfile fallocate: /ocfs2/test: fallocate failed: No space left on device and a kernel warning: CPU: 3 PID: 3656 Comm: fallocate Tainted: G W O 3.11.0-rc3 #2 Call Trace: dump_stack+0x77/0x9e warn_slowpath_common+0xc4/0x110 warn_slowpath_null+0x2a/0x40 start_this_handle+0x6c/0x640 [jbd2] jbd2__journal_start+0x138/0x300 [jbd2] jbd2_journal_start+0x23/0x30 [jbd2] ocfs2_start_trans+0x166/0x300 [ocfs2] __ocfs2_extend_allocation+0x38f/0xdb0 [ocfs2] ocfs2_allocate_unwritten_extents+0x3c9/0x520 __ocfs2_change_file_space+0x5e0/0xa60 [ocfs2] ocfs2_fallocate+0xb1/0xe0 [ocfs2] do_fallocate+0x1cb/0x220 SyS_fallocate+0x6f/0xb0 system_call_fastpath+0x16/0x1b JBD2: fallocate wants too many credits (51216 > 4381) Signed-off-by: Jie Liu <jeff.liu@oracle.com> Cc: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2013, 00:57:49 UTC
28a0c88 Lothar Waßmann 13 August 2013, 23:00:56 UTC drivers/rtc/rtc-stmp3xxx.c: provide timeout for potentially endless loop polling a HW bit It's always a bad idea to poll on HW bits without a timeout. The i.MX28 RTC can be easily brought into a state in which the RTC is not running (until after a power-on-reset) and thus the status bits which are polled in the driver won't ever change. This patch prevents the kernel from getting stuck in this case. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2013, 00:57:48 UTC
b610ded Michal Hocko 13 August 2013, 23:00:55 UTC hugetlb: fix lockdep splat caused by pmd sharing Dave has reported the following lockdep splat: ================================= [ INFO: inconsistent lock state ] 3.11.0-rc1+ #9 Not tainted --------------------------------- inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. kswapd0/49 [HC0[0]:SC0[0]:HE1:SE1] takes: (&mapping->i_mmap_mutex){+.+.?.}, at: [<c114971b>] page_referenced+0x87/0x5e3 {RECLAIM_FS-ON-W} state was registered at: mark_held_locks+0x81/0xe7 lockdep_trace_alloc+0x5e/0xbc __alloc_pages_nodemask+0x8b/0x9b6 __get_free_pages+0x20/0x31 get_zeroed_page+0x12/0x14 __pmd_alloc+0x1c/0x6b huge_pmd_share+0x265/0x283 huge_pte_alloc+0x5d/0x71 hugetlb_fault+0x7c/0x64a handle_mm_fault+0x255/0x299 __do_page_fault+0x142/0x55c do_page_fault+0xd/0x16 error_code+0x6c/0x74 irq event stamp: 3136917 hardirqs last enabled at (3136917): _raw_spin_unlock_irq+0x27/0x50 hardirqs last disabled at (3136916): _raw_spin_lock_irq+0x15/0x78 softirqs last enabled at (3136180): __do_softirq+0x137/0x30f softirqs last disabled at (3136175): irq_exit+0xa8/0xaa other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&mapping->i_mmap_mutex); <Interrupt> lock(&mapping->i_mmap_mutex); *** DEADLOCK *** no locks held by kswapd0/49. stack backtrace: CPU: 1 PID: 49 Comm: kswapd0 Not tainted 3.11.0-rc1+ #9 Hardware name: Dell Inc. Precision WorkStation 490 /0DT031, BIOS A08 04/25/2008 Call Trace: dump_stack+0x4b/0x79 print_usage_bug+0x1d9/0x1e3 mark_lock+0x1e0/0x261 __lock_acquire+0x623/0x17f2 lock_acquire+0x7d/0x195 mutex_lock_nested+0x6c/0x3a7 page_referenced+0x87/0x5e3 shrink_page_list+0x3d9/0x947 shrink_inactive_list+0x155/0x4cb shrink_lruvec+0x300/0x5ce shrink_zone+0x53/0x14e kswapd+0x517/0xa75 kthread+0xa8/0xaa ret_from_kernel_thread+0x1b/0x28 which is a false positive caused by hugetlb pmd sharing code which allocates a new pmd from withing mapping->i_mmap_mutex. If this allocation causes reclaim then the lockdep detector complains that we might self-deadlock. This is not correct though, because hugetlb pages are not reclaimable so their mapping will be never touched from the reclaim path. The patch tells lockup detector that hugetlb i_mmap_mutex is special by assigning it a separate lockdep class so it won't report possible deadlocks on unrelated mappings. [peterz@infradead.org: comment for annotation] Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2013, 00:57:48 UTC
fb32975 Ed Cashin 13 August 2013, 23:00:53 UTC aoe: adjust ref of head for compound page tails Fix a BUG which can trigger when direct-IO is used with AOE. As discussed previously, the fact that some users of the block layer provide bios that point to pages with a zero _count means that it is not OK for the network layer to do a put_page on the skb frags during an skb_linearize, so the aoe driver gets a reference to pages in bios and puts the reference before ending the bio. And because it cannot use get_page on a page with a zero _count, it manipulates the value directly. It is not OK to increment the _count of a compound page tail, though, since the VM layer will VM_BUG_ON a non-zero _count. Block users that do direct I/O can result in the aoe driver seeing compound page tails in bios. In that case, the same logic works as long as the head of the compound page is used instead of the tails. This patch handles compound pages and does not BUG. It relies on the block layer user leaving the relationship between the page tail and its head alone for the duration between the submission of the bio and its completion, whether successful or not. Signed-off-by: Ed Cashin <ecashin@coraid.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2013, 00:57:48 UTC
dfa9771 Michal Simek 13 August 2013, 23:00:53 UTC microblaze: fix clone syscall Fix inadvertent breakage in the clone syscall ABI for Microblaze that was introduced in commit f3268edbe6fe ("microblaze: switch to generic fork/vfork/clone"). The Microblaze syscall ABI for clone takes the parent tid address in the 4th argument; the third argument slot is used for the stack size. The incorrectly-used CLONE_BACKWARDS type assigned parent tid to the 3rd slot. This commit restores the original ABI so that existing userspace libc code will work correctly. All kernel versions from v3.8-rc1 were affected. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2013, 00:57:48 UTC
41bb347 Cyrill Gorcunov 13 August 2013, 23:00:51 UTC mm: save soft-dirty bits on file pages Andy reported that if file page get reclaimed we lose the soft-dirty bit if it was there, so save _PAGE_BIT_SOFT_DIRTY bit when page address get encoded into pte entry. Thus when #pf happens on such non-present pte we can restore it back. Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2013, 00:57:48 UTC
179ef71 Cyrill Gorcunov 13 August 2013, 23:00:49 UTC mm: save soft-dirty bits on swapped pages Andy Lutomirski reported that if a page with _PAGE_SOFT_DIRTY bit set get swapped out, the bit is getting lost and no longer available when pte read back. To resolve this we introduce _PTE_SWP_SOFT_DIRTY bit which is saved in pte entry for the page being swapped out. When such page is to be read back from a swap cache we check for bit presence and if it's there we clear it and restore the former _PAGE_SOFT_DIRTY bit back. One of the problem was to find a place in pte entry where we can save the _PTE_SWP_SOFT_DIRTY bit while page is in swap. The _PAGE_PSE was chosen for that, it doesn't intersect with swap entry format stored in pte. Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2013, 00:57:47 UTC
3e6b11d Andrey Vagin 13 August 2013, 23:00:47 UTC memcg: don't initialize kmem-cache destroying work for root caches struct memcg_cache_params has a union. Different parts of this union are used for root and non-root caches. A part with destroying work is used only for non-root caches. I fixed the same problem in another place v3.9-rc1-16204-gf101a94, but didn't notice this one. This patch fixes the kernel panic: [ 46.848187] BUG: unable to handle kernel paging request at 000000fffffffeb8 [ 46.849026] IP: [<ffffffff811a484c>] kmem_cache_destroy_memcg_children+0x6c/0xc0 [ 46.849092] PGD 0 [ 46.849092] Oops: 0000 [#1] SMP ... Signed-off-by: Andrey Vagin <avagin@openvz.org> Cc: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@vger.kernel.org> [3.9.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 August 2013, 00:57:47 UTC
9cff866 Alexey Brodkin 13 August 2013, 13:04:36 UTC ethernet/arc/arc_emac - fix NAPI "work > weight" warning Initially I improperly set a boundary for maximum number of input packets to process on NAPI poll ("work") so it might be more than expected amount ("weight"). This was really harmless but seeing WARN_ON_ONCE on every device boot is not nice. So trivial fix ("<" instead of "<=") is here. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Mischa Jonker <mjonker@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> 14 August 2013, 00:00:45 UTC
28fbc8b Linus Torvalds 13 August 2013, 23:58:17 UTC Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Docbook fixes that make 99% of the diffstat, plus a oneliner fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Ensure update_cfs_shares() is called for parents of continuously-running tasks sched: Fix some kernel-doc warnings 13 August 2013, 23:58:17 UTC
bfd3605 Linus Torvalds 13 August 2013, 23:57:40 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two small fixlets" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Add Haswell ULT model number used in Macbook Air and other systems perf/x86: Fix intel QPI uncore event definitions 13 August 2013, 23:57:40 UTC
b88a259 Stephen Boyd 07 August 2013, 23:18:08 UTC perf/arm: Fix armpmu_map_hw_event() Fix constraint check in armpmu_map_hw_event(). Reported-and-tested-by: Vince Weaver <vincent.weaver@maine.edu> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 August 2013, 23:57:24 UTC
4221f40 Pravin B Shelar 13 August 2013, 08:41:06 UTC ip_tunnel: Do not use inner ip-header-id for tunnel ip-header-id. Using inner-id for tunnel id is not safe in some rare cases. E.g. packets coming from multiple sources entering same tunnel can have same id. Therefore on tunnel packet receive we could have packets from two different stream but with same source and dst IP with same ip-id which could confuse ip packet reassembly. Following patch reverts optimization from commit 490ab08127 (IP_GRE: Fix IP-Identification.) CC: Jarno Rajahalme <jrajahalme@nicira.com> CC: Ansis Atteka <aatteka@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 August 2013, 23:52:50 UTC
50f850f David S. Miller 13 August 2013, 23:04:38 UTC Merge branch 'bnx2x' Dmitry Kravkov says: ==================== Please consider applying the series of bnx2x fixes to net: * statistics may cause FW assert * missing fairness configuration in DCB flow * memory leak in sriov related part * Illegal PTE access * Pagefault crash in shutdown flow with cnic v1->v2 * fixed sparse error pointed by Joe Perches * added missing signed-off from Sergei Shtylyov v2->v3 * added missing signed-off from Sergei Shtylyov * fixed formatting from Sergei Shtylyov v3->v4 * patch 1/6: fixed declaration order * patch 2/6 replaced with: protect flows using set_bit constraints v4->v5 * patch 2/6: replace proprietary locking with semaphore * droped 1/6: since adds redundant code from Benjamin Poirier The following patchset contains four netfilter fixes, they are: * Fix possible invalid access and mangling of the TCPMSS option in xt_TCPMSS. This was spotted by Julian Anastasov. * Fix possible off by one access and mangling of the TCP packet in xt_TCPOPTSTRIP, also spotted by Julian Anastasov. * Fix possible information leak due to missing initialization of one padding field of several structures that are included in nfqueue and nflog netlink messages, from Dan Carpenter. * Fix TCP window tracking with Fast Open, from Yuchung Cheng. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 13 August 2013, 23:04:38 UTC
6ef5a92 Yuval Mintz 12 August 2013, 23:25:03 UTC bnx2x: prevent crash in shutdown flow with CNIC There might be a crash as during shutdown flow CNIC might try to access resources already freed by bnx2x. Change bnx2x_close() into dev_close() in __bnx2x_remove (shutdown flow) to guarantee CNIC is notified of the device's change of status. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 August 2013, 23:04:28 UTC
a6d3a5b Barak Witkowsky 12 August 2013, 23:25:02 UTC bnx2x: fix PTE write access error PTE write access error might occur in MF_ALLOWED mode when IOMMU is active. The patch adds rmmod HSI indicating to MFW to stop running queries which might trigger this failure. Signed-off-by: Barak Witkowsky <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 August 2013, 23:04:28 UTC
8ece516 Ariel Elior 12 August 2013, 23:25:01 UTC bnx2x: fix memory leak in VF Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 August 2013, 23:04:28 UTC
568e242 Dmitry Kravkov 12 August 2013, 23:25:00 UTC bnx2x: update fairness parameters following DCB negotiation ETS can be enabled as a result of DCB negotiation, then fairness must be recalculated after each negotiation. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 August 2013, 23:04:28 UTC
507393e Dmitry Kravkov 12 August 2013, 23:24:59 UTC bnx2x: protect different statistics flows Add locking to protect different statistics flows from running simultaneously. This in order to serialize statistics requests sent to FW, otherwise two outstanding queries may cause FW assert. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 August 2013, 23:04:28 UTC
40fea92 Stephen Boyd 13 August 2013, 21:12:40 UTC PM / QoS: Fix workqueue deadlock when using pm_qos_update_request_timeout() pm_qos_update_request_timeout() updates a qos and then schedules a delayed work item to bring the qos back down to the default after the timeout. When the work item runs, pm_qos_work_fn() will call pm_qos_update_request() and deadlock because it tries to cancel itself via cancel_delayed_work_sync(). Future callers of that qos will also hang waiting to cancel the work that is canceling itself. Let's extract the little bit of code that does the real work of pm_qos_update_request() and call it from the work function so that we don't deadlock. Before ed1ac6e (PM: don't use [delayed_]work_pending()) this didn't happen because the work function wouldn't try to cancel itself. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: 3.9+ <stable@vger.kernel.org> # 3.9+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 13 August 2013, 22:42:05 UTC
205057a Hyong-Youb Kim 12 August 2013, 09:20:02 UTC myri10ge: Update MAINTAINERS Remove Andrew Gallatin, as he is no longer with Myricom. Add Hyong-Youb Kim as the new maintainer. Update the website URL. Signed-off-by: Hyong-Youb Kim <hykim@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 August 2013, 22:25:25 UTC
e47851f stephen hemminger 10 August 2013, 22:02:07 UTC skge: dma_sync the whole receive buffer The DMA sync should sync the whole receive buffer, not just part of it. Fixes log messages dma_sync_check. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net> 13 August 2013, 22:09:06 UTC
2a28224 Russell King 13 August 2013, 19:23:28 UTC Merge branch 'security-fixes' into fixes 13 August 2013, 19:23:28 UTC
2103f6c Stephen Warren 02 August 2013, 19:52:49 UTC ARM: 7807/1: kexec: validate CPU hotplug support Architectures should fully validate whether kexec is possible as part of machine_kexec_prepare(), so that user-space's kexec_load() operation can report any problems. Performing validation in machine_kexec() itself is too late, since it is not allowed to return. Prior to this patch, ARM's machine_kexec() was testing after-the-fact whether machine_kexec_prepare() was able to disable all but one CPU. Instead, modify machine_kexec_prepare() to validate all conditions necessary for machine_kexec_prepare()'s to succeed. BUG if the validation succeeded, yet disabling the CPUs didn't actually work. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 13 August 2013, 19:23:18 UTC
00efaa0 Will Deacon 12 August 2013, 17:04:05 UTC ARM: 7812/1: rwlocks: retry trylock operation if strex fails on free lock Commit 15e7e5c1ebf5 ("ARM: 7749/1: spinlock: retry trylock operation if strex fails on free lock") modifying our arch_spin_trylock to retry the acquisition if the lock appeared uncontended, but the strex failed. This patch does the same for rwlocks, which were missed by the original patch. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 13 August 2013, 19:22:44 UTC
afa31d8 Will Deacon 12 August 2013, 17:03:26 UTC ARM: 7811/1: locks: use early clobber in arch_spin_trylock The res variable is written before we've finished with the input operands (namely the lock address), so ensure that we mark it as `early clobber' to avoid unintended register sharing. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 13 August 2013, 19:22:43 UTC
d9f9663 Stephen Boyd 08 August 2013, 17:41:59 UTC ARM: 7810/1: perf: Fix array out of bounds access in armpmu_map_hw_event() Vince Weaver reports an oops in the ARM perf event code while running his perf_fuzzer tool on a pandaboard running v3.11-rc4. Unable to handle kernel paging request at virtual address 73fd14cc pgd = eca6c000 [73fd14cc] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: snd_soc_omap_hdmi omapdss snd_soc_omap_abe_twl6040 snd_soc_twl6040 snd_soc_omap snd_soc_omap_hdmi_card snd_soc_omap_mcpdm snd_soc_omap_mcbsp snd_soc_core snd_compress regmap_spi snd_pcm snd_page_alloc snd_timer snd soundcore CPU: 1 PID: 2790 Comm: perf_fuzzer Not tainted 3.11.0-rc4 #6 task: eddcab80 ti: ed892000 task.ti: ed892000 PC is at armpmu_map_event+0x20/0x88 LR is at armpmu_event_init+0x38/0x280 pc : [<c001c3e4>] lr : [<c001c17c>] psr: 60000013 sp : ed893e40 ip : ecececec fp : edfaec00 r10: 00000000 r9 : 00000000 r8 : ed8c3ac0 r7 : ed8c3b5c r6 : edfaec00 r5 : 00000000 r4 : 00000000 r3 : 000000ff r2 : c0496144 r1 : c049611c r0 : edfaec00 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: aca6c04a DAC: 00000015 Process perf_fuzzer (pid: 2790, stack limit = 0xed892240) Stack: (0xed893e40 to 0xed894000) 3e40: 00000800 c001c17c 00000002 c008a748 00000001 00000000 00000000 c00bf078 3e60: 00000000 edfaee50 00000000 00000000 00000000 edfaec00 ed8c3ac0 edfaec00 3e80: 00000000 c073ffac ed893f20 c00bf180 00000001 00000000 c00bf078 ed893f20 3ea0: 00000000 ed8c3ac0 00000000 00000000 00000000 c0cb0818 eddcab80 c00bf440 3ec0: ed893f20 00000000 eddcab80 eca76800 00000000 eca76800 00000000 00000000 3ee0: 00000000 ec984c80 eddcab80 c00bfe68 00000000 00000000 00000000 00000080 3f00: 00000000 ed892000 00000000 ed892030 00000004 ecc7e3c8 ecc7e3c8 00000000 3f20: 00000000 00000048 ecececec 00000000 00000000 00000000 00000000 00000000 3f40: 00000000 00000000 00297810 00000000 00000000 00000000 00000000 00000000 3f60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3f80: 00000002 00000002 000103a4 00000002 0000016c c00128e8 ed892000 00000000 3fa0: 00090998 c0012700 00000002 000103a4 00090ab8 00000000 00000000 0000000f 3fc0: 00000002 000103a4 00000002 0000016c 00090ab0 00090ab8 000107a0 00090998 3fe0: bed92be0 bed92bd0 0000b785 b6e8f6d0 40000010 00090ab8 00000000 00000000 [<c001c3e4>] (armpmu_map_event+0x20/0x88) from [<c001c17c>] (armpmu_event_init+0x38/0x280) [<c001c17c>] (armpmu_event_init+0x38/0x280) from [<c00bf180>] (perf_init_event+0x108/0x180) [<c00bf180>] (perf_init_event+0x108/0x180) from [<c00bf440>] (perf_event_alloc+0x248/0x40c) [<c00bf440>] (perf_event_alloc+0x248/0x40c) from [<c00bfe68>] (SyS_perf_event_open+0x4f4/0x8fc) [<c00bfe68>] (SyS_perf_event_open+0x4f4/0x8fc) from [<c0012700>] (ret_fast_syscall+0x0/0x48) Code: 0a000005 e3540004 0a000016 e3540000 (0791010c) This is because event->attr.config in armpmu_event_init() contains a very large number copied directly from userspace and is never checked against the size of the array indexed in armpmu_map_hw_event(). Fix the problem by checking the value of config before indexing the array and rejecting invalid config values. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Tested-by: Vince Weaver <vincent.weaver@maine.edu> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 13 August 2013, 19:21:44 UTC
c95eb31 Will Deacon 07 August 2013, 22:39:41 UTC ARM: 7809/1: perf: fix event validation for software group leaders It is possible to construct an event group with a software event as a group leader and then subsequently add a hardware event to the group. This results in the event group being validated by adding all members of the group to a fake PMU and attempting to allocate each event on their respective PMU. Unfortunately, for software events wthout a corresponding arm_pmu, this results in a kernel crash attempting to dereference the ->get_event_idx function pointer. This patch fixes the problem by checking explicitly for software events and ignoring those in event validation (since they can always be scheduled). We will probably want to revisit this for 3.12, since the validation checks don't appear to work correctly when dealing with multiple hardware PMUs anyway. Cc: <stable@vger.kernel.org> Reported-by: Vince Weaver <vincent.weaver@maine.edu> Tested-by: Vince Weaver <vincent.weaver@maine.edu> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 13 August 2013, 19:21:43 UTC
a701fe3 Sylwester Nawrocki 25 July 2013, 21:07:05 UTC clk: exynos4: Add CLK_GET_RATE_NOCACHE flag for the Exynos4x12 ISP clocks The ISP clock registers belong to the ISP power domain and may change their values if this power domain is switched off/on. Add CLK_GET_RATE_NOCACHE flags to ensure we do not rely on invalid cached data when setting or getting frequency of those clocks. Without this fix the FIMC-IS Cortex-A5 core and AXI bus clocks have incorrect frequencies, which breaks the ISP operation and starting the video pipeline fails with timeouts reported by the FIMC-IS firmware. See related commit 722a860ecb29aa34ec6f7d7f32b949209e8 "[media] exynos4-is: Fix FIMC-IS clocks initialization" for more details. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> 13 August 2013, 17:01:56 UTC
765b7d4 Soren Brinkmann 17 June 2013, 22:47:40 UTC clk/zynq/clkc: Add CLK_SET_RATE_PARENT flag to ethernet muxes Zynq's Ethernet clocks are created by the following hierarchy: mux0 ---> div0 ---> div1 ---> mux1 ---> gate Rate change requests on the gate have to propagate all the way up to div0 to properly leverage all dividers. Mux1 was missing the CLK_SET_RATE_PARENT flag, which is required to achieve this. This does not fix a specific regression but the clock driver was merged for 3.11-rc1, so best to fix the known bugs before the release. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: added to changelog] 13 August 2013, 17:01:55 UTC
252957c Soren Brinkmann 17 June 2013, 22:03:46 UTC clk/zynq/clkc: Add dedicated spinlock for the SWDT The clk_mux for the system watchdog timer reused the register lock dedicated to the Ethernet module - for no apparent reason. Add a lock dedicated to the SWDT's clock register to remove this wrong dependency. This does not fix a specific regression but the clock driver was merged for 3.11-rc1, so best to fix the known bugs before the release. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: added to changelog] 13 August 2013, 17:01:55 UTC
e0acd0a Oleg Nesterov 12 August 2013, 16:14:00 UTC sched: fix the theoretical signal_wake_up() vs schedule() race This is only theoretical, but after try_to_wake_up(p) was changed to check p->state under p->pi_lock the code like __set_current_state(TASK_INTERRUPTIBLE); schedule(); can miss a signal. This is the special case of wait-for-condition, it relies on try_to_wake_up/schedule interaction and thus it does not need mb() between __set_current_state() and if(signal_pending). However, this __set_current_state() can move into the critical section protected by rq->lock, now that try_to_wake_up() takes another lock we need to ensure that it can't be reordered with "if (signal_pending(current))" check inside that section. The patch is actually one-liner, it simply adds smp_wmb() before spin_lock_irq(rq->lock). This is what try_to_wake_up() already does by the same reason. We turn this wmb() into the new helper, smp_mb__before_spinlock(), for better documentation and to allow the architectures to change the default implementation. While at it, kill smp_mb__after_lock(), it has no callers. Perhaps we can also add smp_mb__before/after_spinunlock() for prepare_to_wait(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 August 2013, 15:19:26 UTC
a903f08 Li Zefan 13 August 2013, 02:05:59 UTC cpuset: fix the return value of cpuset_write_u64() Writing to this file always returns -ENODEV: # echo 1 > cpuset.memory_pressure_enabled -bash: echo: write error: No such device Signed-off-by: Li Zefan <lizefan@huawei.com> Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Tejun Heo <tj@kernel.org> 13 August 2013, 14:54:40 UTC
58ad436 Johannes Berg 13 August 2013, 07:04:05 UTC genetlink: fix family dump race When dumping generic netlink families, only the first dump call is locked with genl_lock(), which protects the list of families, and thus subsequent calls can access the data without locking, racing against family addition/removal. This can cause a crash. Fix it - the locking needs to be conditional because the first time around it's already locked. A similar bug was reported to me on an old kernel (3.4.47) but the exact scenario that happened there is no longer possible, on those kernels the first round wasn't locked either. Looking at the current code I found the race described above, which had also existed on the old kernel. Cc: stable@vger.kernel.org Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 August 2013, 07:57:06 UTC
771085d Daniel Borkmann 09 August 2013, 14:25:21 UTC net: sctp: sctp_transport_destroy{, _rcu}: fix potential pointer corruption Probably this one is quite unlikely to be triggered, but it's more safe to do the call_rcu() at the end after we have dropped the reference on the asoc and freed sctp packet chunks. The reason why is because in sctp_transport_destroy_rcu() the transport is being kfree()'d, and if we're unlucky enough we could run into corrupted pointers. Probably that's more of theoretical nature, but it's safer to have this simple fix. Introduced by commit 8c98653f ("sctp: sctp_close: fix release of bindings for deferred call_rcu's"). I also did the 8c98653f regression test and it's fine that way. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 August 2013, 05:13:47 UTC
ac4f959 Daniel Borkmann 09 August 2013, 13:09:08 UTC net: sctp: sctp_assoc_control_transport: fix MTU size in SCTP_PF state The SCTP Quick failover draft [1] section 5.1, point 5 says that the cwnd should be 1 MTU. So, instead of 1, set it to 1 MTU. [1] https://tools.ietf.org/html/draft-nishida-tsvwg-sctp-failover-05 Reported-by: Karl Heiss <kheiss@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 August 2013, 05:12:20 UTC
5632913 Bartlomiej Zolnierkiewicz 09 August 2013, 12:02:08 UTC stmmac: fix init_dma_desc_rings() to handle errors In stmmac_init_rx_buffers(): * add missing handling of dma_map_single() error * remove superfluous unlikely() optimization while at it Add stmmac_free_rx_buffers() helper and use it in dma_free_rx_skbufs(). In init_dma_desc_rings(): * add missing handling of kmalloc_array() errors * fix handling of dma_alloc_coherent() and stmmac_init_rx_buffers() errors * make function return an error value on error and 0 on success In stmmac_open(): * add handling of init_dma_desc_rings() return value Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 August 2013, 05:11:29 UTC
584d88b Linus Torvalds 12 August 2013, 22:02:53 UTC Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6 Pull CIFS fixes from Steve French: "A set of small cifs fixes, including 3 relating to symlink handling" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: don't instantiate new dentries in readdir for inodes that need to be revalidated immediately cifs: set sb->s_d_op before calling d_make_root() cifs: fix bad error handling in crypto code cifs: file: initialize oparms.reconnect before using it Do not attempt to do cifs operations reading symlinks with SMB2 cifs: extend the buffer length enought for sprintf() using 12 August 2013, 22:02:53 UTC
fd4f35d Linus Torvalds 12 August 2013, 22:00:40 UTC Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull more ext4 bugfixes from Ted Ts'o: "A number of miscellaneous ext4 bugs fixes for v3.11, including a fix so that if ext4 is built as a module, to allow it to be unloaded" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: flush the extent status cache during EXT4_IOC_SWAP_BOOT ext4: fix mount/remount error messages for incompatible mount options ext4: allow the mount options nodelalloc and data=journal 12 August 2013, 22:00:40 UTC
e877dd2 Johan Hovold 11 August 2013, 14:49:23 UTC USB: ti_usb_3410_5052: fix big-endian firmware handling Fix endianess bugs in firmware handling introduced by commits cb7a7c6a ("ti_usb_3410_5052: add Multi-Tech modem support") and 05a3d905 ("ti_usb_3410_5052: support alternate firmware") which made the driver use the wrong firmware for certain devices on big-endian machines. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 12 August 2013, 20:52:35 UTC
d482b9d Johan Hovold 11 August 2013, 14:49:22 UTC USB: adutux: fix big-endian device-type reporting Make sure the reported device-type on big-endian machines is the same as on little-endian ones. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 12 August 2013, 20:52:35 UTC
c786138 Johan Hovold 11 August 2013, 14:49:21 UTC USB: usbtmc: fix big-endian probe of Rigol devices Fix probe of Rigol devices on big-endian machines. A quirk for these devices was introduced by commit c2e314835 ("USB: usbtmc: Set rigol_quirk if device is listed") but was only enabled on little-endian machines. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 12 August 2013, 20:52:35 UTC
d551ec9 Johan Hovold 11 August 2013, 14:49:20 UTC USB: mos7840: fix big-endian probe Fix bug in device-type detection on big-endian machines originally introduced by commit 0eafe4de ("USB: serial: mos7840: add support for MCS7810 devices") which always matched on little-endian product ids. Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 12 August 2013, 20:52:35 UTC
6c1ee66 Matt Burtch 12 August 2013, 17:11:39 UTC USB-Serial: Fix error handling of usb_wwan This fixes an issue where the bulk-in urb used for incoming data transfer is not resubmitted if the packet recieved contains an error status. This results in the driver locking until the port is closed and re-opened. Tested on a custom board with a Cinterion GSM module. Signed-off-by: Matt Burtch <matt@grid-net.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 12 August 2013, 20:45:26 UTC
ec58fad Thomas Pugliese 09 August 2013, 14:52:13 UTC wusbcore: fix kernel panic when disconnecting a wireless USB->serial device This patch fixes a kernel panic that can occur when disconnecting a wireless USB->serial device. When the serial device disconnects, the device cleanup procedure ends up calling usb_hcd_disable_endpoint on the serial device's endpoints. The wusbcore uses the ABORT_RPIPE command to abort all transfers on the given endpoint but it does not properly give back the URBs when the transfer results return from the HWA. This patch prevents the transfer result processing code from bailing out when it sees a WA_XFER_STATUS_ABORTED result code so that these urbs are flushed properly by usb_hcd_disable_endpoint. It also updates wa_urb_dequeue to handle the case where the endpoint has already been cleaned up when usb_kill_urb is called which is where the panic originally occurred. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 12 August 2013, 20:45:26 UTC
24f5313 Alan Stern 07 August 2013, 14:58:05 UTC USB: EHCI: accept very late isochronous URBs Since commits 4005ad4390bf (EHCI: implement new semantics for URB_ISO_ASAP) and c75c5ab575af (ALSA: USB: adjust for changed 3.8 USB API) became widely distributed, people have been experiencing problems with audio transfers. The slightest underrun causes complete failure, requiring the audio stream to be restarted. It turns out that the current isochronous API doesn't handle underruns in the best way. The ALSA developers would much rather have transfers that are submitted too late be accepted and complete in the normal fashion, rather than being refused outright. This patch implements the requested approach. When an isochronous URB submission is so late that all its scheduled slots have already expired, a debugging message will be printed in the log and the URB will be accepted as usual. Assuming it was submitted by a completion handler (which is normally the case), it will complete shortly thereafter with all the usb_iso_packet_descriptor status fields marked -EXDEV. This fixes (for ehci-hcd) https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1191603 It should be applied to all kernels that include commit 4005ad4390bf. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Maksim Boyko <maksboyko@yandex.ru> CC: Clemens Ladisch <clemens@ladisch.de> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 12 August 2013, 20:45:26 UTC
2782255 Linus Torvalds 12 August 2013, 19:01:28 UTC Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull w/w mutex deadlock injection fix from Ingo Molnar. This bug made the CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y option largely useless, but wouldn't affect normal users. * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mutex: Fix w/w mutex deadlock injection 12 August 2013, 19:01:28 UTC
91aa11f Jan Kara 12 August 2013, 13:53:28 UTC jbd2: Fix use after free after error in jbd2_journal_dirty_metadata() When jbd2_journal_dirty_metadata() returns error, __ext4_handle_dirty_metadata() stops the handle. However callers of this function do not count with that fact and still happily used now freed handle. This use after free can result in various issues but very likely we oops soon. The motivation of adding __ext4_journal_stop() into __ext4_handle_dirty_metadata() in commit 9ea7a0df seems to be only to improve error reporting. So replace __ext4_journal_stop() with ext4_journal_abort_handle() which was there before that commit and add WARN_ON_ONCE() to dump stack to provide useful information. Reported-by: Sage Weil <sage@inktank.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org # 3.2+ 12 August 2013, 13:53:28 UTC
cde2d7a Theodore Ts'o 12 August 2013, 13:29:30 UTC ext4: flush the extent status cache during EXT4_IOC_SWAP_BOOT Previously we weren't swapping only some of the extent_status LRU fields during the processing of the EXT4_IOC_SWAP_BOOT ioctl. The much safer thing to do is to just completely flush the extent status tree when doing the swap. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Zheng Liu <gnehzuil.liu@gmail.com> Cc: stable@vger.kernel.org 12 August 2013, 13:29:30 UTC
140d37d Maksim A. Boyko 10 August 2013, 08:20:02 UTC ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525 Add the volume control quirk for avoiding the kernel warning for the Logitech HD Webcam C525 as in the similar commit 36691e1be6ec551eef4a5225f126a281f8c051c2 for the Logitech HD Webcam C310. Reported-by: Maksim Boyko <maksim.a.boyko@gmail.com> Tested-by: Maksim Boyko <maksim.a.boyko@gmail.com> Cc: <stable@vger.kernel.org> # 3.10.5+ Signed-off-by: Maksim Boyko <maksim.a.boyko@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 12 August 2013, 12:55:20 UTC
0499bd8 Andi Kleen 09 August 2013, 00:26:23 UTC perf/x86: Add Haswell ULT model number used in Macbook Air and other systems This one was missed earlier. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1376007983-31616-1-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 12 August 2013, 10:19:58 UTC
f69910d Takashi Iwai 08 August 2013, 07:32:37 UTC ALSA: hda - Fix missing mute controls for CX5051 We've added a fake mute control (setting the amp volume to zero) for CX5051 at commit [3868137e: ALSA: hda - Add a fake mute feature], but this feature was overlooked in the generic parser implementation. Now the driver lacks of mute controls on these codecs. The fix is just to check both AC_AMPCAP_MUTE and AC_AMPCAP_MIN_MUTE bits in each place checking the amp capabilities. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59001 Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: Takashi Iwai <tiwai@suse.de> 12 August 2013, 09:42:39 UTC
back to top