https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
4f7d029 Linux 4.11-rc7 16 April 2017, 20:00:18 UTC
7395ca0 Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Again, a batch that's been sitting a couple of weeks, mostly because I anticipated a bit more material but it didn't show up -- which is good. These are all your garden variety fixes for ARM platforms. The most visible issue fixed here is probably the SMP reset issue on OMAP, the rest are minor stuff" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: allwinner: a64: add pmu0 regs for USB PHY ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer reset: add exported __reset_control_get, return NULL if optional ARM: orion5x: only call into phylib when available ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend ARM: dts: ti: fix PCI bus dtc warnings ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY ARM: dts: OMAP3: Fix MFG ID EEPROM ARM: sun8i: a33: add operating-points-v2 property to all nodes ARM: sun8i: a33: remove highest OPP to fix CPU crashes 16 April 2017, 19:38:17 UTC
a86f106 Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "Four small fixes. Three of them fix the same error in NVMe, in loop, fc, and rdma respectively. The last fix from Ming fixes a regression in this series, where our bvec gap logic was wrong and causes an oops on NVMe for certain conditions" * 'for-linus' of git://git.kernel.dk/linux-block: block: fix bio_will_gap() for first bvec with offset nvme-fc: Fix sqsize wrong assignment based on ctrl MQES capability nvme-rdma: Fix sqsize wrong assignment based on ctrl MQES capability nvme-loop: Fix sqsize wrong assignment based on ctrl MQES capability 16 April 2017, 19:05:09 UTC
e2647b6 Merge tag 'omap-for-v4.11/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Regression fix for omap interconnect code for deferred probe. Without this fix we can get PM related warnings for devices that use deferred probe. If necessary, this fix can wait for the v4.12 merge window no problem. * tag 'omap-for-v4.11/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend ARM: dts: ti: fix PCI bus dtc warnings ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY ARM: dts: OMAP3: Fix MFG ID EEPROM Signed-off-by: Olof Johansson <olof@lixom.net> 16 April 2017, 18:52:26 UTC
11c994d Merge branch 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "Unfortunately, the commit to fix the cgroup mount race in the previous pull request can lead to hangs. The original bug has been around for a while and isn't too likely to be triggered in usual use cases. Revert the commit for now" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: Revert "cgroup: avoid attaching a cgroup root to two different superblocks" 16 April 2017, 18:48:10 UTC
032aaf3 Merge tag 'tty-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty fix from Greg KH: "Here is a single tty core revert for a patch that was reported to cause problems. The original issue is one that we have lived with for decades, so trying to scramble to fix the fix in time for 4.11-final does not make sense due to the fragility of the tty ldisc layer. Just reverting it makes sense for now" * tag 'tty-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: don't panic on OOM in tty_set_ldisc()" 16 April 2017, 18:35:34 UTC
4853886 Merge tag 'trace-v4.11-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fix from Steven Rostedt: "While rewriting the function probe code, I stumbled over a long standing bug. This bug has been there sinc function tracing was added way back when. But my new development depends on this bug being fixed, and it should be fixed regardless as it causes ftrace to disable itself when triggered, and a reboot is required to enable it again. The bug is that the function probe does not disable itself properly if there's another probe of its type still enabled. For example: # cd /sys/kernel/debug/tracing # echo schedule:traceoff > set_ftrace_filter # echo do_IRQ:traceoff > set_ftrace_filter # echo \!do_IRQ:traceoff > /debug/tracing/set_ftrace_filter # echo do_IRQ:traceoff > set_ftrace_filter The above registers two traceoff probes (one for schedule and one for do_IRQ, and then removes do_IRQ. But since there still exists one for schedule, it is not done properly. When adding do_IRQ back, the breakage in the accounting is noticed by the ftrace self tests, and it causes a warning and disables ftrace" * tag 'trace-v4.11-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix removing of second function probe 16 April 2017, 17:01:34 UTC
330c418 Revert "cgroup: avoid attaching a cgroup root to two different superblocks" This reverts commit bfb0b80db5f9dca5ac0a5fd0edb765ee555e5a8e. Andrei reports CRIU test hangs with the patch applied. The bug fixed by the patch isn't too likely to trigger in actual uses. Revert the patch for now. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Andrei Vagin <avagin@virtuozzo.com> Link: http://lkml.kernel.org/r/20170414232737.GC20350@outlook.office365.com 16 April 2017, 14:17:37 UTC
d5ff081 Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull nvdimm fixes from Dan Williams: "A small crop of lockdep, sleeping while atomic, and other fixes / band-aids in advance of the full-blown reworks targeting the next merge window. The largest change here is "libnvdimm: fix blk free space accounting" which deletes a pile of buggy code that better testing would have caught before merging. The next change that is borderline too big for a late rc is switching the device-dax locking from rcu to srcu, I couldn't think of a smaller way to make that fix. The __copy_user_nocache fix will have a full replacement in 4.12 to move those pmem special case considerations into the pmem driver. The "libnvdimm: band aid btt vs clear poison locking" commit admits that our error clearing support for btt went in broken, so we just disable it in 4.11 and -stable. A replacement / full fix is in the pipeline for 4.12 Some of these would have been caught earlier had DEBUG_ATOMIC_SLEEP been enabled on my development station. I wonder if we should have: config DEBUG_ATOMIC_SLEEP default PROVE_LOCKING ...since I mistakenly thought I got both with PROVE_LOCKING=y. These have received a build success notification from the 0day robot, and some have appeared in a -next release with no reported issues" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: x86, pmem: fix broken __copy_user_nocache cache-bypass assumptions device-dax: switch to srcu, fix rcu_read_lock() vs pte allocation libnvdimm: band aid btt vs clear poison locking libnvdimm: fix reconfig_mutex, mmap_sem, and jbd2_handle lockdep splat libnvdimm: fix blk free space accounting acpi, nfit, libnvdimm: fix interleave set cookie calculation (64-bit comparison) 15 April 2017, 21:07:03 UTC
403a39f Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is seven small fixes which are all for user visible issues that fortunately only occur in rare circumstances. The most serious is the sr one in which QEMU can cause us to read beyond the end of a buffer (I don't think it's exploitable, but just in case). The next is the sd capacity fix which means all non 512 byte sector drives greater than 2TB fail to be correctly sized. The rest are either in new drivers (qedf) or on error legs" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ipr: do not set DID_PASSTHROUGH on CHECK CONDITION scsi: aacraid: fix PCI error recovery path scsi: sd: Fix capacity calculation with 32-bit sector_t scsi: qla2xxx: Add fix to read correct register value for ISP82xx. scsi: qedf: Fix crash due to unsolicited FIP VLAN response. scsi: sr: Sanity check returned mode data scsi: sd: Consider max_xfer_blocks if opt_xfer_blocks is unusable 15 April 2017, 16:42:14 UTC
be84a46 Merge branch 'parisc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "Mikulas Patocka fixed a few bugs in our new pa_memcpy() assembler function, e.g. one bug made the kernel unbootable if source and destination address are the same" * 'parisc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix bugs in pa_memcpy 15 April 2017, 16:40:35 UTC
1ec1688 orangefs: free superblock when mount fails Otherwise lockdep says: [ 1337.483798] ================================================ [ 1337.483999] [ BUG: lock held when returning to user space! ] [ 1337.484252] 4.11.0-rc6 #19 Not tainted [ 1337.484423] ------------------------------------------------ [ 1337.484626] mount/14766 is leaving the kernel with locks still held! [ 1337.484841] 1 lock held by mount/14766: [ 1337.485017] #0: (&type->s_umount_key#33/1){+.+.+.}, at: [<ffffffff8124171f>] sget_userns+0x2af/0x520 Caught by xfstests generic/413 which tried to mount with the unsupported mount option dax. Then xfstests generic/422 ran sync which deadlocks. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Acked-by: Mike Marshall <hubcap@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 April 2017, 16:39:31 UTC
c0eb027 vfs: don't do RCU lookup of empty pathnames Normal pathname lookup doesn't allow empty pathnames, but using AT_EMPTY_PATH (with name_to_handle_at() or fstatat(), for example) you can trigger an empty pathname lookup. And not only is the RCU lookup in that case entirely unnecessary (because we'll obviously immediately finalize the end result), it is actively wrong. Why? An empth path is a special case that will return the original 'dirfd' dentry - and that dentry may not actually be RCU-free'd, resulting in a potential use-after-free if we were to initialize the path lazily under the RCU read lock and depend on complete_walk() finalizing the dentry. Found by syzkaller and KASAN. Reported-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 April 2017, 16:34:52 UTC
409c1b2 parisc: fix bugs in pa_memcpy The patch 554bfeceb8a22d448cd986fc9efce25e833278a1 ("parisc: Fix access fault handling in pa_memcpy()") reimplements the pa_memcpy function. Unfortunatelly, it makes the kernel unbootable. The crash happens in the function ide_complete_cmd where memcpy is called with the same source and destination address. This patch fixes a few bugs in pa_memcpy: * When jumping to .Lcopy_loop_16 for the first time, don't skip the instruction "ldi 31,t0" (this bug made the kernel unbootable) * Use the COND macro when comparing length, so that the comparison is 64-bit (a theoretical issue, in case the length is greater than 0xffffffff) * Don't use the COND macro after the "extru" instruction (the PA-RISC specification says that the upper 32-bits of extru result are undefined, although they are set to zero in practice) * Fix exception addresses in .Lcopy16_fault and .Lcopy8_fault * Rename .Lcopy_loop_4 to .Lcopy_loop_8 (so that it is consistent with .Lcopy8_fault) Cc: <stable@vger.kernel.org> # v4.9+ Fixes: 554bfeceb8a2 ("parisc: Fix access fault handling in pa_memcpy()") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Helge Deller <deller@gmx.de> 15 April 2017, 15:24:05 UTC
1bf4b12 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a small update to xpad driver to recognize yet another gamepad, and another change making sure userio.h is exported" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add support for Razer Wildcat gamepad uapi: add missing install of userio.h 15 April 2017, 00:51:16 UTC
7e703ec Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: "Things seem to be settling down as far as networking is concerned, let's hope this trend continues... 1) Add iov_iter_revert() and use it to fix the behavior of skb_copy_datagram_msg() et al., from Al Viro. 2) Fix the protocol used in the synthetic SKB we cons up for the purposes of doing a simulated route lookup for RTM_GETROUTE requests. From Florian Larysch. 3) Don't add noop_qdisc to the per-device qdisc hashes, from Cong Wang. 4) Don't call netdev_change_features with the team lock held, from Xin Long. 5) Revert TCP F-RTO extension to catch more spurious timeouts because it interacts very badly with some middle-boxes. From Yuchung Cheng. 6) Fix the loss of error values in l2tp {s,g}etsockopt calls, from Guillaume Nault. 7) ctnetlink uses bit positions where it should be using bit masks, fix from Liping Zhang. 8) Missing RCU locking in netfilter helper code, from Gao Feng. 9) Avoid double frees and use-after-frees in tcp_disconnect(), from Eric Dumazet. 10) Don't do a changelink before we register the netdevice in bridging, from Ido Schimmel. 11) Lock the ipv6 device address list properly, from Rabin Vincent" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits) netfilter: ipt_CLUSTERIP: Fix wrong conntrack netns refcnt usage netfilter: nft_hash: do not dump the auto generated seed drivers: net: usb: qmi_wwan: add QMI_QUIRK_SET_DTR for Telit PID 0x1201 ipv6: Fix idev->addr_list corruption net: xdp: don't export dev_change_xdp_fd() bridge: netlink: register netdevice before executing changelink bridge: implement missing ndo_uninit() bpf: reference may_access_skb() from __bpf_prog_run() tcp: clear saved_syn in tcp_disconnect() netfilter: nf_ct_expect: use proper RCU list traversal/update APIs netfilter: ctnetlink: skip dumping expect when nfct_help(ct) is NULL netfilter: make it safer during the inet6_dev->addr_list traversal netfilter: ctnetlink: make it safer when checking the ct helper name netfilter: helper: Add the rcu lock when call __nf_conntrack_helper_find netfilter: ctnetlink: using bit to represent the ct event netfilter: xt_TCPMSS: add more sanity tests on tcph->doff net: tcp: Increase TCP_MIB_OUTRSTS even though fail to alloc skb l2tp: don't mask errors in pppol2tp_getsockopt() l2tp: don't mask errors in pppol2tp_setsockopt() tcp: restrict F-RTO to work-around broken middle-boxes ... 15 April 2017, 00:38:24 UTC
9117439 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of small fixes for x86: - fix locking in RDT to prevent memory leaks and freeing in use memory - prevent setting invalid values for vdso32_enabled which cause inconsistencies for user space resulting in application crashes. - plug a race in the vdso32 code between fork and sysctl which causes inconsistencies for user space resulting in application crashes. - make MPX signal delivery work in compat mode - make the dmesg output of traps and faults readable again" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel_rdt: Fix locking in rdtgroup_schemata_write() x86/debug: Fix the printk() debug output of signal_fault(), do_trap() and do_general_protection() x86/vdso: Plug race between mapping and ELF header setup x86/vdso: Ensure vdso32_enabled gets set to valid values only x86/signals: Fix lower/upper bound reporting in compat siginfo 15 April 2017, 00:00:01 UTC
07c7016 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Two small fixes for perf: - the move to support cross arch annotation introduced per arch initialization requirements, fullfill them for s/390 (Christian Borntraeger) - add the missing initialization to the LBR entries to avoid exposing random or stale data" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Avoid exposing wrong/stale data in intel_pmu_lbr_read_32() perf annotate s390: Fix perf annotate error -95 (4.10 regression) 14 April 2017, 23:58:38 UTC
d295917 Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "The irq department provides: - two fixes for the CPU affinity spread infrastructure to prevent unbalanced spreading in corner cases which leads to horrible performance, because interrupts are rather aggregated than spread - add a missing spinlock initializer in the imx-gpcv2 init code" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-imx-gpcv2: Fix spinlock initialization irq/affinity: Fix extra vecs calculation irq/affinity: Fix CPU spread for unbalanced nodes 14 April 2017, 23:57:14 UTC
f399ecb Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Thomas Gleixner: "Three fixes from EFI land: - prevent accessing a Graphic Output Device (GOP) which the kernel does not know to handle - prevent PCI reconfiguration to modify a BAR which covers the framebuffer because that's already in use through the EFI GOP interface - avoid reserving EFI runtime regions as this results in bogus memory mappings" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Don't try to reserve runtime regions efi/fb: Avoid reconfiguration of BAR that covers the framebuffer efi/libstub: Skip GOP with PIXEL_BLT_ONLY format 14 April 2017, 23:55:33 UTC
4b31ac4 Merge branch 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Dave Sterba collected a few more fixes for the last rc. These aren't marked for stable, but I'm putting them in with a batch were testing/sending by hand for this release" * 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix potential use-after-free for cloned bio Btrfs: fix segmentation fault when doing dio read Btrfs: fix invalid dereference in btrfs_retry_endio btrfs: drop the nossd flag when remounting with -o ssd 14 April 2017, 23:53:45 UTC
5466f4d Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6 Pull more CIFS fixes from Steve French: "As promised, here is the remaining set of cifs/smb3 fixes for stable (and a fix for one regression) now that they have had additional review and testing" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix SMB3 mount without specifying a security mechanism CIFS: store results of cifs_reopen_file to avoid infinite wait CIFS: remove bad_network_name flag CIFS: reconnect thread reschedule itself CIFS: handle guest access errors to Windows shares CIFS: Fix null pointer deref during read resp processing 14 April 2017, 23:51:29 UTC
82cc4fc ftrace: Fix removing of second function probe When two function probes are added to set_ftrace_filter, and then one of them is removed, the update to the function locations is not performed, and the record keeping of the function states are corrupted, and causes an ftrace_bug() to occur. This is easily reproducable by adding two probes, removing one, and then adding it back again. # cd /sys/kernel/debug/tracing # echo schedule:traceoff > set_ftrace_filter # echo do_IRQ:traceoff > set_ftrace_filter # echo \!do_IRQ:traceoff > /debug/tracing/set_ftrace_filter # echo do_IRQ:traceoff > set_ftrace_filter Causes: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1098 at kernel/trace/ftrace.c:2369 ftrace_get_addr_curr+0x143/0x220 Modules linked in: [...] CPU: 2 PID: 1098 Comm: bash Not tainted 4.10.0-test+ #405 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012 Call Trace: dump_stack+0x68/0x9f __warn+0x111/0x130 ? trace_irq_work_interrupt+0xa0/0xa0 warn_slowpath_null+0x1d/0x20 ftrace_get_addr_curr+0x143/0x220 ? __fentry__+0x10/0x10 ftrace_replace_code+0xe3/0x4f0 ? ftrace_int3_handler+0x90/0x90 ? printk+0x99/0xb5 ? 0xffffffff81000000 ftrace_modify_all_code+0x97/0x110 arch_ftrace_update_code+0x10/0x20 ftrace_run_update_code+0x1c/0x60 ftrace_run_modify_code.isra.48.constprop.62+0x8e/0xd0 register_ftrace_function_probe+0x4b6/0x590 ? ftrace_startup+0x310/0x310 ? debug_lockdep_rcu_enabled.part.4+0x1a/0x30 ? update_stack_state+0x88/0x110 ? ftrace_regex_write.isra.43.part.44+0x1d3/0x320 ? preempt_count_sub+0x18/0xd0 ? mutex_lock_nested+0x104/0x800 ? ftrace_regex_write.isra.43.part.44+0x1d3/0x320 ? __unwind_start+0x1c0/0x1c0 ? _mutex_lock_nest_lock+0x800/0x800 ftrace_trace_probe_callback.isra.3+0xc0/0x130 ? func_set_flag+0xe0/0xe0 ? __lock_acquire+0x642/0x1790 ? __might_fault+0x1e/0x20 ? trace_get_user+0x398/0x470 ? strcmp+0x35/0x60 ftrace_trace_onoff_callback+0x48/0x70 ftrace_regex_write.isra.43.part.44+0x251/0x320 ? match_records+0x420/0x420 ftrace_filter_write+0x2b/0x30 __vfs_write+0xd7/0x330 ? do_loop_readv_writev+0x120/0x120 ? locks_remove_posix+0x90/0x2f0 ? do_lock_file_wait+0x160/0x160 ? __lock_is_held+0x93/0x100 ? rcu_read_lock_sched_held+0x5c/0xb0 ? preempt_count_sub+0x18/0xd0 ? __sb_start_write+0x10a/0x230 ? vfs_write+0x222/0x240 vfs_write+0xef/0x240 SyS_write+0xab/0x130 ? SyS_read+0x130/0x130 ? trace_hardirqs_on_caller+0x182/0x280 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0xad RIP: 0033:0x7fe61c157c30 RSP: 002b:00007ffe87890258 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: ffffffff8114a410 RCX: 00007fe61c157c30 RDX: 0000000000000010 RSI: 000055814798f5e0 RDI: 0000000000000001 RBP: ffff8800c9027f98 R08: 00007fe61c422740 R09: 00007fe61ca53700 R10: 0000000000000073 R11: 0000000000000246 R12: 0000558147a36400 R13: 00007ffe8788f160 R14: 0000000000000024 R15: 00007ffe8788f15c ? trace_hardirqs_off_caller+0xc0/0x110 ---[ end trace 99fa09b3d9869c2c ]--- Bad trampoline accounting at: ffffffff81cc3b00 (do_IRQ+0x0/0x150) Cc: stable@vger.kernel.org Fixes: 59df055f1991 ("ftrace: trace different functions with a different tracer") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 14 April 2017, 21:54:22 UTC
5a8d75a block: fix bio_will_gap() for first bvec with offset Commit 729204ef49ec("block: relax check on sg gap") allows us to merge bios, if both are physically contiguous. This change can merge a huge number of small bios, through mkfs for example, mkfs.ntfs running time can be decreased to ~1/10. But if one rq starts with a non-aligned buffer (the 1st bvec's bv_offset is non-zero) and if we allow the merge, it is quite difficult to respect sg gap limit, especially the max segment size, or we risk having an unaligned virtual boundary. This patch tries to avoid the issue by disallowing a merge, if the req starts with an unaligned buffer. Also add comments to explain why the merged segment can't end in unaligned virt boundary. Fixes: 729204ef49ec ("block: relax check on sg gap") Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Rewrote parts of the commit message and comments. Signed-off-by: Jens Axboe <axboe@fb.com> 14 April 2017, 19:58:29 UTC
82f1faa Merge tag 'fbdev-v4.11-rc6' of git://github.com/bzolnier/linux Pull fbdev fixes from Bartlomiej Zolnierkiewicz: - fix probing time checks in omapfb driver (regression fix) - fix optional VBAT support in ssd1307fb driver (regression fix) - fix connecting to backend in xen-fbfront driver * tag 'fbdev-v4.11-rc6' of git://github.com/bzolnier/linux: fbdev: omapfb: delete check_required_callbacks() xen, fbfront: fix connecting to backend fbdev/ssd1307fb: fix optional VBAT support 14 April 2017, 16:18:17 UTC
e16d8b6 Merge tag 'pm-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a cpufreq core regression related to CPU online/offline and several issues in the turbostat and cpupower utilities. Specifics: - Allow CPUs to be put back online even if the cpufreq driver is unable to work with them (eg. due to missing information from platform firmware), which was the previous behavior expected by users, but changed in the 4.9 time frame (Chen Yu). - Fix a few minor issues in the turbostat utility, introduced mostly during the recent update of it (Len Brown, Doug Smythies). - Fix a cpupower utility bug causing it to report incorrect values for turbo frequencies in some cases (Ben Hutchings)" * tag 'pm-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpupower: Fix turbo frequency reporting for pre-Sandy Bridge cores cpufreq: Bring CPUs up even if cpufreq_online() failed tools/power turbostat: update version number tools/power turbostat: fix impossibly large CPU%c1 value tools/power turbostat: turbostat.8 add missing column definitions tools/power turbostat: update HWP dump to decimal from hex tools/power turbostat: enable package THERM_INTERRUPT dump tools/power turbostat: show missing Core and GFX power on SKL and KBL tools/power turbostat: bugfix: GFXMHz column not changing 14 April 2017, 16:16:23 UTC
321ae37 Merge tag 'acpi-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert a recent ACPICA commit that turned out to be problematic and fix a device enumeration breakage from the 4.8 cycle. Specifics: - Revert a recent ACPICA commit targeted at catching firmware bugs which promptly did that and caused functional problems to appear (Rafael Wysocki). - Fix a device enumeration problem introduced in the 4.8 time frame which caused the ACPI docking station driver to report incorrect status via sysfs among other things (Rafael Wysocki)" * tag 'acpi-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPICA: Resources: Not a valid resource if buffer length too long" ACPI / scan: Set the visited flag for all enumerated devices 14 April 2017, 16:05:42 UTC
1882e56 Merge tag 'devmem-v4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull CONFIG_STRICT_DEVMEM fix from Kees Cook: "Fixes /dev/mem to read back zeros for System RAM areas in the 1MB exception area on x86 to avoid exposing RAM or tripping hardened usercopy" * tag 'devmem-v4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: mm: Tighten x86 /dev/mem with zeroing reads 14 April 2017, 15:57:20 UTC
7873933 Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio fixes from Michael S. Tsirkin: "virtio oops fixes The virtio pci rework using shared interrupts caused a lot of issues. We tried to fix them but run out of time. Revert for now, and revisit the issue for the next kernel. Luckily we are able to do this without loosing automatic interrupt NUMA affinity which was the main motivator for the rework" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-pci: Remove affinity hint before freeing the interrupt Revert "virtio_pci: remove struct virtio_pci_vq_info" Revert "virtio_pci: use shared interrupts for virtqueues" Revert "virtio_pci: don't duplicate the msix_enable flag in struct pci_dev" Revert "virtio_pci: simplify MSI-X setup" Revert "virtio_pci: fix out of bound access for msix_names" MAINTAINERS: fix virtio file pattern virtio_console: fix uninitialized variable use virtio_net: clear MTU when out of range virtio: allow drivers to validate features virtio_net: enable big packets for large MTU values 14 April 2017, 15:49:39 UTC
f4c13c8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Missing TCP header sanity check in TCPMSS target, from Eric Dumazet. 2) Incorrect event message type for related conntracks created via ctnetlink, from Liping Zhang. 3) Fix incorrect rcu locking when handling helpers from ctnetlink, from Gao feng. 4) Fix missing rcu locking when updating helper, from Liping Zhang. 5) Fix missing read_lock_bh when iterating over list of device addresses from TPROXY and redirect, also from Liping. 6) Fix crash when trying to dump expectations from conntrack with no helper via ctnetlink, from Liping. 7) Missing RCU protection to expecation list update given ctnetlink iterates over the list under rcu read lock side, from Liping too. 8) Don't dump autogenerated seed in nft_hash to userspace, this is very confusing to the user, again from Liping. 9) Fix wrong conntrack netns module refcount in ipt_CLUSTERIP, from Gao feng. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 14 April 2017, 14:47:13 UTC
e68d490 fbdev: omapfb: delete check_required_callbacks() Commit 561eb9d09a93 ("fbdev: omap/lcd: Make callbacks optional") made panel callbacks optional but forgot to update check_required_callbacks(). As a result many (all?) OMAP systems using omapfb will crash at boot. Fix by deleting the whole function. Fixes: 561eb9d09a93 ("fbdev: omap/lcd: Make callbacks optional") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> 14 April 2017, 11:38:32 UTC
f83e13f Merge branches 'acpi-scan-fixes' and 'acpica-fixes' * acpi-scan-fixes: ACPI / scan: Set the visited flag for all enumerated devices * acpica-fixes: Revert "ACPICA: Resources: Not a valid resource if buffer length too long" 14 April 2017, 11:11:43 UTC
66803c9 Merge branches 'pm-cpufreq-fixes' and 'pm-tools-fixes' * pm-cpufreq-fixes: cpufreq: Bring CPUs up even if cpufreq_online() failed * pm-tools-fixes: cpupower: Fix turbo frequency reporting for pre-Sandy Bridge cores tools/power turbostat: update version number tools/power turbostat: fix impossibly large CPU%c1 value tools/power turbostat: turbostat.8 add missing column definitions tools/power turbostat: update HWP dump to decimal from hex tools/power turbostat: enable package THERM_INTERRUPT dump tools/power turbostat: show missing Core and GFX power on SKL and KBL tools/power turbostat: bugfix: GFXMHz column not changing 14 April 2017, 11:11:09 UTC
a8983d0 Revert "tty: don't panic on OOM in tty_set_ldisc()" This reverts commit 5362544bebe85071188dd9e479b5a5040841c895 as it is reported to cause a reproducable crash. Fixes: 5362544bebe8 ("tty: don't panic on OOM in tty_set_ldisc()") Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <syzkaller@googlegroups.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org 14 April 2017, 08:59:56 UTC
75eb5e1 irqchip/irq-imx-gpcv2: Fix spinlock initialization The raw_spinlock in the IMX GPCV2 interupt chip is not initialized before usage. That results in a lockdep splat: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Add the missing raw_spin_lock_init() to the setup code. Fixes: e324c4dc4a59 ("irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources") Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: shawnguo@kernel.org Cc: andrew.smirnov@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170413222731.5917-1-tyler.baker@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 14 April 2017, 08:55:05 UTC
f2200ac perf/x86: Avoid exposing wrong/stale data in intel_pmu_lbr_read_32() When the perf_branch_entry::{in_tx,abort,cycles} fields were added, intel_pmu_lbr_read_32() wasn't updated to initialize them. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> Fixes: 135c5612c460 ("perf/x86/intel: Support Haswell/v4 LBR format") Signed-off-by: Ingo Molnar <mingo@kernel.org> 14 April 2017, 08:18:00 UTC
a232591 Merge branch 'akpm' (patches from Andrew) Merge fixes from Andrew Morton: "11 fixes. The presence of 'thp: reduce indentation level in change_huge_pmd()' is unfortunate. But the patchset had been decently reviewed and tested before we decided it was needed in -stable and I felt it best not to churn things at the last minute" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mailmap: add Martin Kepplinger's email zsmalloc: expand class bit zram: do not use copy_page with non-page aligned address zram: fix operator precedence to get offset hugetlbfs: fix offset overflow in hugetlbfs mmap thp: fix MADV_DONTNEED vs clear soft dirty race thp: fix MADV_DONTNEED vs. MADV_FREE race mm: drop unused pmdp_huge_get_and_clear_notify() thp: fix MADV_DONTNEED vs. numa balancing race thp: reduce indentation level in change_huge_pmd() z3fold: fix page locking in z3fold_alloc() 14 April 2017, 03:08:33 UTC
5714320 mailmap: add Martin Kepplinger's email Set the partly deprecated companies' email addresses as alias for the personal one. Link: http://lkml.kernel.org/r/1491984622-17321-1-git-send-email-martin.kepplinger@ginzinger.com Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2017, 01:24:21 UTC
85d492f zsmalloc: expand class bit Now 64K page system, zsamlloc has 257 classes so 8 class bit is not enough. With that, it corrupts the system when zsmalloc stores 65536byte data(ie, index number 256) so that this patch increases class bit for simple fix for stable backport. We should clean up this mess soon. index size 0 32 1 288 .. .. 204 52256 256 65536 Fixes: 3783689a1 ("zsmalloc: introduce zspage structure") Link: http://lkml.kernel.org/r/1492042622-12074-3-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2017, 01:24:21 UTC
d72e9a7 zram: do not use copy_page with non-page aligned address The copy_page is optimized memcpy for page-alinged address. If it is used with non-page aligned address, it can corrupt memory which means system corruption. With zram, it can happen with 1. 64K architecture 2. partial IO 3. slub debug Partial IO need to allocate a page and zram allocates it via kmalloc. With slub debug, kmalloc(PAGE_SIZE) doesn't return page-size aligned address. And finally, copy_page(mem, cmem) corrupts memory. So, this patch changes it to memcpy. Actuaully, we don't need to change zram_bvec_write part because zsmalloc returns page-aligned address in case of PAGE_SIZE class but it's not good to rely on the internal of zsmalloc. Note: When this patch is merged to stable, clear_page should be fixed, too. Unfortunately, recent zram removes it by "same page merge" feature so it's hard to backport this patch to -stable tree. I will handle it when I receive the mail from stable tree maintainer to merge this patch to backport. Fixes: 42e99bd ("zram: optimize memory operations with clear_page()/copy_page()") Link: http://lkml.kernel.org/r/1492042622-12074-2-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2017, 01:24:21 UTC
4ca82da zram: fix operator precedence to get offset In zram_rw_page, the logic to get offset is wrong by operator precedence (i.e., "<<" is higher than "&"). With wrong offset, zram can corrupt the user's data. This patch fixes it. Fixes: 8c7f01025 ("zram: implement rw_page operation of zram") Link: http://lkml.kernel.org/r/1492042622-12074-1-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2017, 01:24:21 UTC
045c7a3 hugetlbfs: fix offset overflow in hugetlbfs mmap If mmap() maps a file, it can be passed an offset into the file at which the mapping is to start. Offset could be a negative value when represented as a loff_t. The offset plus length will be used to update the file size (i_size) which is also a loff_t. Validate the value of offset and offset + length to make sure they do not overflow and appear as negative. Found by syzcaller with commit ff8c0c53c475 ("mm/hugetlb.c: don't call region_abort if region_chg fails") applied. Prior to this commit, the overflow would still occur but we would luckily return ENOMEM. To reproduce: mmap(0, 0x2000, 0, 0x40021, 0xffffffffffffffffULL, 0x8000000000000000ULL); Resulted in, kernel BUG at mm/hugetlb.c:742! Call Trace: hugetlbfs_evict_inode+0x80/0xa0 evict+0x24a/0x620 iput+0x48f/0x8c0 dentry_unlink_inode+0x31f/0x4d0 __dentry_kill+0x292/0x5e0 dput+0x730/0x830 __fput+0x438/0x720 ____fput+0x1a/0x20 task_work_run+0xfe/0x180 exit_to_usermode_loop+0x133/0x150 syscall_return_slowpath+0x184/0x1c0 entry_SYSCALL_64_fastpath+0xab/0xad Fixes: ff8c0c53c475 ("mm/hugetlb.c: don't call region_abort if region_chg fails") Link: http://lkml.kernel.org/r/1491951118-30678-1-git-send-email-mike.kravetz@oracle.com Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2017, 01:24:21 UTC
5b7abea thp: fix MADV_DONTNEED vs clear soft dirty race Yet another instance of the same race. Fix is identical to change_huge_pmd(). See "thp: fix MADV_DONTNEED vs. numa balancing race" for more details. Link: http://lkml.kernel.org/r/20170302151034.27829-5-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2017, 01:24:21 UTC
58ceeb6 thp: fix MADV_DONTNEED vs. MADV_FREE race Both MADV_DONTNEED and MADV_FREE handled with down_read(mmap_sem). It's critical to not clear pmd intermittently while handling MADV_FREE to avoid race with MADV_DONTNEED: CPU0: CPU1: madvise_free_huge_pmd() pmdp_huge_get_and_clear_full() madvise_dontneed() zap_pmd_range() pmd_trans_huge(*pmd) == 0 (without ptl) // skip the pmd set_pmd_at(); // pmd is re-established It results in MADV_DONTNEED skipping the pmd, leaving it not cleared. It violates MADV_DONTNEED interface and can result is userspace misbehaviour. Basically it's the same race as with numa balancing in change_huge_pmd(), but a bit simpler to mitigate: we don't need to preserve dirty/young flags here due to MADV_FREE functionality. [kirill.shutemov@linux.intel.com: Urgh... Power is special again] Link: http://lkml.kernel.org/r/20170303102636.bhd2zhtpds4mt62a@black.fi.intel.com Link: http://lkml.kernel.org/r/20170302151034.27829-4-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2017, 01:24:21 UTC
c0c379e mm: drop unused pmdp_huge_get_and_clear_notify() Dave noticed that after fixing MADV_DONTNEED vs numa balancing race the last pmdp_huge_get_and_clear_notify() user is gone. Let's drop the helper. Link: http://lkml.kernel.org/r/20170306112047.24809-1-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2017, 01:24:21 UTC
ced1080 thp: fix MADV_DONTNEED vs. numa balancing race In case prot_numa, we are under down_read(mmap_sem). It's critical to not clear pmd intermittently to avoid race with MADV_DONTNEED which is also under down_read(mmap_sem): CPU0: CPU1: change_huge_pmd(prot_numa=1) pmdp_huge_get_and_clear_notify() madvise_dontneed() zap_pmd_range() pmd_trans_huge(*pmd) == 0 (without ptl) // skip the pmd set_pmd_at(); // pmd is re-established The race makes MADV_DONTNEED miss the huge pmd and don't clear it which may break userspace. Found by code analysis, never saw triggered. Link: http://lkml.kernel.org/r/20170302151034.27829-3-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2017, 01:24:20 UTC
0a85e51 thp: reduce indentation level in change_huge_pmd() Patch series "thp: fix few MADV_DONTNEED races" For MADV_DONTNEED to work properly with huge pages, it's critical to not clear pmd intermittently unless you hold down_write(mmap_sem). Otherwise MADV_DONTNEED can miss the THP which can lead to userspace breakage. See example of such race in commit message of patch 2/4. All these races are found by code inspection. I haven't seen them triggered. I don't think it's worth to apply them to stable@. This patch (of 4): Restructure code in preparation for a fix. Link: http://lkml.kernel.org/r/20170302151034.27829-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2017, 01:24:20 UTC
76e32a2 z3fold: fix page locking in z3fold_alloc() Stress testing of the current z3fold implementation on a 8-core system revealed it was possible that a z3fold page deleted from its unbuddied list in z3fold_alloc() would be put on another unbuddied list by z3fold_free() while z3fold_alloc() is still processing it. This has been introduced with commit 5a27aa822 ("z3fold: add kref refcounting") due to the removal of special handling of a z3fold page not on any list in z3fold_free(). To fix this, the z3fold page lock should be taken in z3fold_alloc() before the pool lock is released. To avoid deadlocking, we just try to lock the page as soon as we get a hold of it, and if trylock fails, we drop this page and take the next one. Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: <Oleksiy.Avramchenko@sony.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2017, 01:24:20 UTC
d8a6e3a ia64: restore symbol versions for symbols defined in assembly The ia64 build generates many warnings like this: WARNING: EXPORT symbol "empty_zero_page" [vmlinux] version generation failed, symbol will not be versioned. Besides adding the necessary header this also requires fiddling with some explicit .S -> .o rules. Cc: IA64-ML <linux-ia64@vger.kernel.org> Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 April 2017, 01:19:49 UTC
3412386 irq/affinity: Fix extra vecs calculation This fixes a math error calculating the extra_vecs. The error assumed only 1 cpu per vector, but the value needs to account for the actual number of cpus per vector in order to get the correct remainder for extra CPU assignment. Fixes: 7bf8222b9bd0 ("irq/affinity: Fix CPU spread for unbalanced nodes") Reported-by: Xiaolong Ye <xiaolong.ye@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Link: http://lkml.kernel.org/r/1492104492-19943-1-git-send-email-keith.busch@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 13 April 2017, 21:41:00 UTC
fe50543 netfilter: ipt_CLUSTERIP: Fix wrong conntrack netns refcnt usage Current codes invoke wrongly nf_ct_netns_get in the destroy routine, it should use nf_ct_netns_put, not nf_ct_netns_get. It could cause some modules could not be unloaded. Fixes: ecb2421b5ddf ("netfilter: add and use nf_ct_netns_get/put") Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 13 April 2017, 21:21:40 UTC
79e09ef netfilter: nft_hash: do not dump the auto generated seed This can prevent the nft utility from printing out the auto generated seed to the user, which is unnecessary and confusing. Fixes: cb1b69b0b15b ("netfilter: nf_tables: add hash expression") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 13 April 2017, 21:20:13 UTC
14cf4a7 drivers: net: usb: qmi_wwan: add QMI_QUIRK_SET_DTR for Telit PID 0x1201 Telit LE920A4 uses the same pid 0x1201 of LE920, but modem implementation is different, since it requires DTR to be set for answering to qmi messages. This patch replaces QMI_FIXED_INTF with QMI_QUIRK_SET_DTR: tests on LE920 have been performed in order to verify backward compatibility. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 April 2017, 16:36:31 UTC
1315f01 Revert "ACPICA: Resources: Not a valid resource if buffer length too long" Revert commit 57707a9a7780 (ACPICA: Resources: Not a valid resource if buffer length too long) as it is reported to prevent the TPM module from loading on Lenovo X60 with Coreboot. It also causes new confusing warnings to show up in the kernel log. Link: https://bugzilla.kernel.org/show_bug.cgi?id=195311 Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 13 April 2017, 16:23:46 UTC
2760078 Merge tag 'pinctrl-v4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Two pin control fixes arriving late, these are hopefully the last pin control fixes I send this kernel cycle. A Chromebook and an Exynos SoC thingie. The Exynos patch is pretty big, it is fixing unbroken a breakage caused by yours truly when trying to figure out the merge mess with the different Samsung platforms for this merge window. Sorry about that. We have countered this situation by assigning a Samsung pin control submaintainer to catch stuff earlier. Summary: - Make the Acer Chromebook keyboard work again with the Intel Cherryview driver. - Fix a merge error in the Exynos 5433 driver" * tag 'pinctrl-v4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: cherryview: Add a quirk to make Acer Chromebook keyboard work again pinctrl: samsung: Add missing part for PINCFG_TYPE_DRV of Exynos5433 13 April 2017, 16:08:29 UTC
67dbea2 CIFS: Fix SMB3 mount without specifying a security mechanism Commit ef65aaede23f ("smb2: Enforce sec= mount option") changed the behavior of a mount command to enforce a specified security mechanism during mounting. On another hand according to the spec if SMB3 server doesn't respond with a security context it implies that it supports NTLMSSP. The current code doesn't keep it in mind and fails a mount for such servers if no security mechanism is specified. Fix this by indicating that a server supports NTLMSSP if a security context isn't returned during negotiate phase. This allows the code to use NTLMSSP by default for SMB3 mounts. Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com> 13 April 2017, 15:03:26 UTC
4cca045 cpupower: Fix turbo frequency reporting for pre-Sandy Bridge cores The switch that conditionally sets CPUPOWER_CAP_HAS_TURBO_RATIO and CPUPOWER_CAP_IS_SNB flags is missing a break, so all cores get both flags set and an assumed base clock of 100 MHz for turbo values. Reported-by: GSR <gsr.bugs@infernal-iceberg.com> Tested-by: GSR <gsr.bugs@infernal-iceberg.com> References: https://bugs.debian.org/859978 Fixes: 8fb2e440b223 (cpupower: Show Intel turbo ratio support via ...) Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 13 April 2017, 12:51:10 UTC
ad0d9c3 Merge branch 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat utility fixes for v4.11 from Len Brown. * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: update version number tools/power turbostat: fix impossibly large CPU%c1 value tools/power turbostat: turbostat.8 add missing column definitions tools/power turbostat: update HWP dump to decimal from hex tools/power turbostat: enable package THERM_INTERRUPT dump tools/power turbostat: show missing Core and GFX power on SKL and KBL tools/power turbostat: bugfix: GFXMHz column not changing 13 April 2017, 12:50:11 UTC
ee921c7 Merge tag 'drm-fixes-for-v4.11-rc7' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "i915, gvt, nouveau, udl and etnaviv fixes. I was away the end of last week, so some of these would have been in rc6, and it's Easter from tomorrow, so I decided I better dequeue what I have now. The nouveau changes, just add a hw enable for GP107 display (like a pci id addition really), and fix a couple of regressions. i915 has some more gvt fixes, along with a few run of the mill ones, the rcu one seems like a few people have hit it. Otherwise a small udl and small etnaviv fix" * tag 'drm-fixes-for-v4.11-rc7' of git://people.freedesktop.org/~airlied/linux: (22 commits) drm/etnaviv: fix missing unlock on error in etnaviv_gpu_submit() drm/udl: Fix unaligned memory access in udl_render_hline drm/i915: Don't call synchronize_rcu_expedited under struct_mutex drm/i915: Suspend GuC prior to GPU Reset during GEM suspend drm/nouveau: initial support (display-only) for GP107 drm/nouveau/kms/nv50: fix double dma_fence_put() when destroying plane state drm/nouveau/kms/nv50: fix setting of HeadSetRasterVertBlankDmi method drm/nouveau/mmu/nv4a: use nv04 mmu rather than the nv44 one drm/nouveau/mpeg: mthd returns true on success now drm/i915/gvt: set the correct default value of CTX STATUS PTR drm/i915/gvt: Fix firmware loading interface for GVT-g golden HW state drm/i915: Use a dummy timeline name for a signaled fence drm/i915: Ironlake do_idle_maps w/a may be called w/o struct_mutex drm/i915/gvt: remove the redundant info NULL check drm/i915/gvt: adjust mem size for low resolution type drm/i915: Avoid lock dropping between rescheduling drm/i915/gvt: exclude cfg space from failsafe mode drm/i915/gvt: Activate/de-activate vGPU in mdev ops. drm/i915/execlists: Wrap tail pointer after reset tweaking drm/i915/perf: remove user triggerable warn ... 13 April 2017, 06:36:23 UTC
827c30a Merge tag 'pwm/for-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fixes from Thierry Reding: "This contain a fix for the atomic update support recently added to the Rockchip driver where the clock reference count would become unbalanced and result in the clock feeding the PWM to always be disabled. Another fix to the Intel LPSS driver that adds an update bit quirk required for a specific configuration" * tag 'pwm/for-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: rockchip: State of PWM clock should synchronize with PWM enabled state pwm: lpss: Set enable-bit before waiting for update-bit to go low pwm: lpss: Split Tangier configuration 13 April 2017, 06:29:45 UTC
6f6266a x86/efi: Don't try to reserve runtime regions Reserving a runtime region results in splitting the EFI memory descriptors for the runtime region. This results in runtime region descriptors with bogus memory mappings, leading to interesting crashes like the following during a kexec: general protection fault: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1 #53 Hardware name: Wiwynn Leopard-Orv2/Leopard-DDR BW, BIOS LBM05 09/30/2016 RIP: 0010:virt_efi_set_variable() ... Call Trace: efi_delete_dummy_variable() efi_enter_virtual_mode() start_kernel() ? set_init_arg() x86_64_start_reservations() x86_64_start_kernel() start_cpu() ... Kernel panic - not syncing: Fatal exception Runtime regions will not be freed and do not need to be reserved, so skip the memmap modification in this case. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: <stable@vger.kernel.org> # v4.9+ Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Dave Young <dyoung@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 8e80632fb23f ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()") Link: http://lkml.kernel.org/r/20170412152719.9779-2-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org> 13 April 2017, 06:09:27 UTC
f406270 ACPI / scan: Set the visited flag for all enumerated devices Commit 10c7e20b2ff3 (ACPI / scan: fix enumeration (visited) flags for bus rescans) attempted to fix a problem with ACPI-based enumerateion of I2C/SPI devices, but it forgot to ensure that the visited flag will be set for all of the other enumerated devices, so fix that. Fixes: 10c7e20b2ff3 (ACPI / scan: fix enumeration (visited) flags for bus rescans) Link: https://bugzilla.kernel.org/show_bug.cgi?id=194885 Reported-and-tested-by: Kevin Locke <kevin@kevinlocke.name> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: 4.8+ <stable@vger.kernel.org> # 4.8+ 13 April 2017, 02:42:18 UTC
c4a3fa2 cpufreq: Bring CPUs up even if cpufreq_online() failed There is a report that after commit 27622b061eb4 ("cpufreq: Convert to hotplug state machine"), the normal CPU offline/online cycle fails on some platforms. According to the ftrace result, this problem was triggered on platforms using acpi-cpufreq as the default cpufreq driver, and due to the lack of some ACPI freq method (eg. _PCT), cpufreq_online() failed and returned a negative value, so the CPU hotplug state machine rolled back the CPU online process. Actually, from the user's perspective, the failure of cpufreq_online() should not prevent that CPU from being brought up, although cpufreq might not work on that CPU. BTW, during system startup cpufreq_online() is not invoked via CPU online but by the cpufreq device creation process, so the APs can be brought up even though cpufreq_online() fails in that stage. This patch ignores the return value of cpufreq_online/offline() and lets the cpufreq framework deal with the failure. cpufreq_online() itself will do a proper rollback in that case and if _PCT is missing, the ACPI cpufreq driver will print a warning if the corresponding debug options have been enabled. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=194581 Fixes: 27622b061eb4 ("cpufreq: Convert to hotplug state machine") Reported-and-tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 13 April 2017, 01:38:44 UTC
5f9bf02 tools/power turbostat: update version number Signed-off-by: Len Brown <len.brown@intel.com> 13 April 2017, 00:03:50 UTC
9514936 tools/power turbostat: fix impossibly large CPU%c1 value Most CPUs do not have a hardware c1 counter, and so turbostat derives c1 residency: c1 = TSC - MPERF - other_core_cstate_counters As it is not possible to atomically read these coutners, measurement jitter can case this calcuation to "go negative" when very close to 0. Turbostat detect that case and simply prints c1 = 0.00% But that check neglected to account for systems where the TSC crystal clock domain and the MPERF BCLK domain are differ by a small amount. That allowed very small negative c1 numbers to escape this check and be printed as huge positve numbers. This code begs for a bit of cleanup, but this patch is the minimal change to fix the issue. Signed-off-by: Len Brown <len.brown@intel.com> 13 April 2017, 00:03:50 UTC
ab23d11 tools/power turbostat: turbostat.8 add missing column definitions Add GFX%rc6 and GFXMHz to the column descriptions section of the turbostat man page. Signed-off-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Len Brown <len.brown@intel.com> 13 April 2017, 00:03:49 UTC
6dbd25a tools/power turbostat: update HWP dump to decimal from hex Syntax only. The HWP CAPABILTIES and REQUEST ratios are more easily viewed in decimal -- just multiply by 100 and you get MHz... new: cpu0: MSR_HWP_CAPABILITIES: 0x010c1b23 (high 35 guar 27 eff 12 low 1) cpu0: MSR_HWP_REQUEST: 0x80002301 (min 1 max 35 des 0 epp 0x80 window 0x0 pkg 0x0) old: cpu0: MSR_HWP_CAPABILITIES: 0x010c1b23 (high 0x23 guar 0x1b eff 0xc low 0x1) cpu0: MSR_HWP_REQUEST: 0x80002301 (min 0x1 max 0x23 des 0x0 epp 0x80 window 0x0 pkg 0x0) Signed-off-by: Len Brown <len.brown@intel.com> 13 April 2017, 00:03:35 UTC
f4896fa tools/power turbostat: enable package THERM_INTERRUPT dump cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00641400 (100 C) cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x884b0800 (25 C) cpu0: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x00000003 (100 C, 100 C) Enable the same per-core output, but hide it behind --debug because it is too verbose on big systems. Signed-off-by: Len Brown <len.brown@intel.com> 13 April 2017, 00:03:34 UTC
8182492 tools/power turbostat: show missing Core and GFX power on SKL and KBL While the current SDM is silent on the matter, the Core and GFX RAPL power meters on SKL and KBL appear to work -- so show them. Reported-by: Yaroslav Isakov <yaroslav.isakov@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com> 13 April 2017, 00:03:19 UTC
2ca62d8 Merge branch 'linux-4.11' of git://github.com/skeggsb/linux into drm-fixes GP107 modesetting support (just recognising the chipset, no other changes until 4.12) a couple of regression fixes, one of them a rather serious double-free issue that appeared in 4.10. * 'linux-4.11' of git://github.com/skeggsb/linux: drm/nouveau: initial support (display-only) for GP107 drm/nouveau/kms/nv50: fix double dma_fence_put() when destroying plane state drm/nouveau/kms/nv50: fix setting of HeadSetRasterVertBlankDmi method drm/nouveau/mmu/nv4a: use nv04 mmu rather than the nv44 one drm/nouveau/mpeg: mthd returns true on success now 12 April 2017, 23:56:05 UTC
88b0b92 Merge tag 'drm-intel-fixes-2017-04-12' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes drm/i915 fixes for v4.11-rc7 one rcu related fix, and a few GVT fixes. * tag 'drm-intel-fixes-2017-04-12' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Don't call synchronize_rcu_expedited under struct_mutex drm/i915: Suspend GuC prior to GPU Reset during GEM suspend drm/i915/gvt: set the correct default value of CTX STATUS PTR drm/i915/gvt: Fix firmware loading interface for GVT-g golden HW state drm/i915: Use a dummy timeline name for a signaled fence drm/i915: Ironlake do_idle_maps w/a may be called w/o struct_mutex drm/i915/gvt: remove the redundant info NULL check drm/i915/gvt: adjust mem size for low resolution type drm/i915: Avoid lock dropping between rescheduling drm/i915/gvt: exclude cfg space from failsafe mode drm/i915/gvt: Activate/de-activate vGPU in mdev ops. drm/i915/execlists: Wrap tail pointer after reset tweaking drm/i915/perf: remove user triggerable warn drm/i915/perf: destroy stream on sample_flags mismatch drm/i915: Align "unfenced" tiled access on gen2, early gen3 12 April 2017, 23:13:04 UTC
97d93f3 Merge tag 'drm-misc-fixes-2017-04-11' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes drm-misc-fixes for 2017-04-11 Core changes: - None Driver changes - udl: Fix unaligned memory access on SPARC (Jonathan) * tag 'drm-misc-fixes-2017-04-11' of git://anongit.freedesktop.org/git/drm-misc: drm/udl: Fix unaligned memory access in udl_render_hline 12 April 2017, 23:12:26 UTC
c7aae62 Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux into drm-fixes Single etnaviv error path fix. * 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux: drm/etnaviv: fix missing unlock on error in etnaviv_gpu_submit() 12 April 2017, 23:11:24 UTC
11e63f6 x86, pmem: fix broken __copy_user_nocache cache-bypass assumptions Before we rework the "pmem api" to stop abusing __copy_user_nocache() for memcpy_to_pmem() we need to fix cases where we may strand dirty data in the cpu cache. The problem occurs when copy_from_iter_pmem() is used for arbitrary data transfers from userspace. There is no guarantee that these transfers, performed by dax_iomap_actor(), will have aligned destinations or aligned transfer lengths. Backstop the usage __copy_user_nocache() with explicit cache management in these unaligned cases. Yes, copy_from_iter_pmem() is now too big for an inline, but addressing that is saved for a later patch that moves the entirety of the "pmem api" into the pmem driver directly. Fixes: 5de490daec8b ("pmem: add copy_from_iter_pmem() and clear_pmem()") Cc: <stable@vger.kernel.org> Cc: <x86@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 12 April 2017, 20:45:18 UTC
956a4cd device-dax: switch to srcu, fix rcu_read_lock() vs pte allocation The following warning triggers with a new unit test that stresses the device-dax interface. =============================== [ ERR: suspicious RCU usage. ] 4.11.0-rc4+ #1049 Tainted: G O ------------------------------- ./include/linux/rcupdate.h:521 Illegal context switch in RCU read-side critical section! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 0 2 locks held by fio/9070: #0: (&mm->mmap_sem){++++++}, at: [<ffffffff8d0739d7>] __do_page_fault+0x167/0x4f0 #1: (rcu_read_lock){......}, at: [<ffffffffc03fbd02>] dax_dev_huge_fault+0x32/0x620 [dax] Call Trace: dump_stack+0x86/0xc3 lockdep_rcu_suspicious+0xd7/0x110 ___might_sleep+0xac/0x250 __might_sleep+0x4a/0x80 __alloc_pages_nodemask+0x23a/0x360 alloc_pages_current+0xa1/0x1f0 pte_alloc_one+0x17/0x80 __pte_alloc+0x1e/0x120 __get_locked_pte+0x1bf/0x1d0 insert_pfn.isra.70+0x3a/0x100 ? lookup_memtype+0xa6/0xd0 vm_insert_mixed+0x64/0x90 dax_dev_huge_fault+0x520/0x620 [dax] ? dax_dev_huge_fault+0x32/0x620 [dax] dax_dev_fault+0x10/0x20 [dax] __do_fault+0x1e/0x140 __handle_mm_fault+0x9af/0x10d0 handle_mm_fault+0x16d/0x370 ? handle_mm_fault+0x47/0x370 __do_page_fault+0x28c/0x4f0 trace_do_page_fault+0x58/0x2a0 do_async_page_fault+0x1a/0xa0 async_page_fault+0x28/0x30 Inserting a page table entry may trigger an allocation while we are holding a read lock to keep the device instance alive for the duration of the fault. Use srcu for this keep-alive protection. Fixes: dee410792419 ("/dev/dax, core: file operations and dax-mmap") Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 12 April 2017, 20:45:18 UTC
a4866aa mm: Tighten x86 /dev/mem with zeroing reads Under CONFIG_STRICT_DEVMEM, reading System RAM through /dev/mem is disallowed. However, on x86, the first 1MB was always allowed for BIOS and similar things, regardless of it actually being System RAM. It was possible for heap to end up getting allocated in low 1MB RAM, and then read by things like x86info or dd, which would trip hardened usercopy: usercopy: kernel memory exposure attempt detected from ffff880000090000 (dma-kmalloc-256) (4096 bytes) This changes the x86 exception for the low 1MB by reading back zeros for System RAM areas instead of blindly allowing them. More work is needed to extend this to mmap, but currently mmap doesn't go through usercopy, so hardened usercopy won't Oops the kernel. Reported-by: Tommi Rantala <tommi.t.rantala@nokia.com> Tested-by: Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by: Kees Cook <keescook@chromium.org> 12 April 2017, 18:40:23 UTC
a2d6cbb ipv6: Fix idev->addr_list corruption addrconf_ifdown() removes elements from the idev->addr_list without holding the idev->lock. If this happens while the loop in __ipv6_dev_get_saddr() is handling the same element, that function ends up in an infinite loop: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [test:1719] Call Trace: ipv6_get_saddr_eval+0x13c/0x3a0 __ipv6_dev_get_saddr+0xe4/0x1f0 ipv6_dev_get_saddr+0x1b4/0x204 ip6_dst_lookup_tail+0xcc/0x27c ip6_dst_lookup_flow+0x38/0x80 udpv6_sendmsg+0x708/0xba8 sock_sendmsg+0x18/0x30 SyS_sendto+0xb8/0xf8 syscall_common+0x34/0x58 Fixes: 6a923934c33 (Revert "ipv6: Revert optional address flusing on ifdown.") Signed-off-by: Rabin Vincent <rabinv@axis.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 April 2017, 17:23:39 UTC
45abdf3 drm/etnaviv: fix missing unlock on error in etnaviv_gpu_submit() Add the missing unlock before return from function etnaviv_gpu_submit() in the error handling case. lst: fixed label name. Fixes: f3cd1b064f11 ("drm/etnaviv: (re-)protect fence allocation with GPU mutex") CC: stable@vger.kernel.org #4.9+ Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> 12 April 2017, 15:22:05 UTC
df7dd8f net: xdp: don't export dev_change_xdp_fd() Since dev_change_xdp_fd() is only used in rtnetlink, which must be built-in, there's no reason to export dev_change_xdp_fd(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> 12 April 2017, 14:29:40 UTC
0e1bfea Merge remote-tracking branch 'mkp-scsi/4.11/scsi-fixes' into fixes 12 April 2017, 14:29:17 UTC
b9b3322 Merge branch 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit Pull audit fix from Paul Moore: "One more small audit fix, this should be the last for v4.11. Seth Forshee noticed a problem where the audit retry queue wasn't being flushed properly when audit was enabled and the audit daemon wasn't running; this patches fixes the problem (see the commit description for more details on the change). Both Seth and I have tested this and everything looks good" * 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit: audit: make sure we don't let the retry queue grow without bounds 12 April 2017, 07:02:33 UTC
025def9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target fixes from Nicholas Bellinger: "There has been work in a number of different areas over the last weeks, including: - Fix target-core-user (TCMU) back-end bi-directional handling (Xiubo Li + Mike Christie + Ilias Tsitsimpis) - Fix iscsi-target TMR reference leak during session shutdown (Rob Millner + Chu Yuan Lin) - Fix target_core_fabric_configfs.c race between LUN shutdown + mapped LUN creation (James Shen) - Fix target-core unknown fabric callback queue-full errors (Potnuri Bharat Teja) - Fix iscsi-target + iser-target queue-full handling in order to support iw_cxgb4 RNICs. (Potnuri Bharat Teja + Sagi Grimberg) - Fix ALUA transition state race between multiple initiator (Mike Christie) - Drop work-around for legacy GlobalSAN initiator, to allow QLogic 57840S + 579xx offload HBAs to work out-of-the-box in MSFT environments. (Martin Svec + Arun Easi) Note that a number are CC'ed for stable, and although the queue-full bug-fixes required for iser-target to work with iw_cxgb4 aren't CC'ed here, they'll be posted to Greg-KH separately" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: tcmu: Skip Data-Out blocks before gathering Data-In buffer for BIDI case iscsi-target: Drop work-around for legacy GlobalSAN initiator target: Fix ALUA transition state race between multiple initiators iser-target: avoid posting a recv buffer twice iser-target: Fix queue-full response handling iscsi-target: Propigate queue_data_in + queue_status errors target: Fix unknown fabric callback queue-full errors tcmu: Fix wrongly calculating of the base_command_size tcmu: Fix possible overwrite of t_data_sg's last iov[] target: Avoid mappedlun symlink creation during lun shutdown iscsi-target: Fix TMR reference leak during session shutdown usb: gadget: Correct usb EP argument for BOT status request tcmu: Allow cmd_time_out to be set to zero (disabled) 12 April 2017, 06:51:58 UTC
06ea4c3 Merge branch 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "This contains fixes for two long standing subtle bugs: - kthread_bind() on a new kthread binds it to specific CPUs and prevents userland from messing with the affinity or cgroup membership. Unfortunately, for cgroup membership, there's a window between kthread creation and kthread_bind*() invocation where the kthread can be moved into a non-root cgroup by userland. Depending on what controllers are in effect, this can assign the kthread unexpected attributes. For example, in the reported case, workqueue workers ended up in a non-root cpuset cgroups and had their CPU affinities overridden. This broke workqueue invariants and led to workqueue stalls. Fixed by closing the window between kthread creation and kthread_bind() as suggested by Oleg. - There was a bug in cgroup mount path which could allow two competing mount attempts to attach the same cgroup_root to two different superblocks. This was caused by mishandling return value from kernfs_pin_sb(). Fixed" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: avoid attaching a cgroup root to two different superblocks cgroup, kthread: close race window where new kthreads can be migrated to non-root cgroups 12 April 2017, 06:38:16 UTC
af94bdf Merge branch 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Two libata fixes. One to disable hotplug on VT6420 which never worked properly. The other reverts an earlier patch which disabled the second port on SB600/700. There were some confusions due to earlier datasheets which incorrectly indicated that the second port is not implemented on both SB600 and 700" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: sata_via: Enable hotplug only on VT6421 Revert "pata_atiixp: Don't use unconnected secondary port on SB600/SB700" 12 April 2017, 06:36:46 UTC
fe251c4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - revert of a commit that switched all Synaptics touchpads over to be driven by hid-rmi. It turns out that this caused several user-visible regressions, and therefore we revert back to the original state before all the reported issues have been fixed. - a new uclogic device ID addition, from Xiaolei Yu. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: Revert "HID: rmi: Handle all Synaptics touchpads using hid-rmi" HID: uclogic: add support for Ugee Tablet EX07S 12 April 2017, 06:35:14 UTC
fc9c89b Merge branch 'bridge-register-netdev-before-changelink' Ido Schimmel says: ==================== bridge: Fix kernel oops during bridge creation First patch adds a missing ndo_uninit() in the bridge driver, which is a prerequisite for the second patch that actually fixes the oops. Please consider both patches for 4.4.y, 4.9.y and 4.10.y ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 12 April 2017, 02:22:45 UTC
5b8d542 bridge: netlink: register netdevice before executing changelink Peter reported a kernel oops when executing the following command: $ ip link add name test type bridge vlan_default_pvid 1 [13634.939408] BUG: unable to handle kernel NULL pointer dereference at 0000000000000190 [13634.939436] IP: __vlan_add+0x73/0x5f0 [...] [13634.939783] Call Trace: [13634.939791] ? pcpu_next_unpop+0x3b/0x50 [13634.939801] ? pcpu_alloc+0x3d2/0x680 [13634.939810] ? br_vlan_add+0x135/0x1b0 [13634.939820] ? __br_vlan_set_default_pvid.part.28+0x204/0x2b0 [13634.939834] ? br_changelink+0x120/0x4e0 [13634.939844] ? br_dev_newlink+0x50/0x70 [13634.939854] ? rtnl_newlink+0x5f5/0x8a0 [13634.939864] ? rtnl_newlink+0x176/0x8a0 [13634.939874] ? mem_cgroup_commit_charge+0x7c/0x4e0 [13634.939886] ? rtnetlink_rcv_msg+0xe1/0x220 [13634.939896] ? lookup_fast+0x52/0x370 [13634.939905] ? rtnl_newlink+0x8a0/0x8a0 [13634.939915] ? netlink_rcv_skb+0xa1/0xc0 [13634.939925] ? rtnetlink_rcv+0x24/0x30 [13634.939934] ? netlink_unicast+0x177/0x220 [13634.939944] ? netlink_sendmsg+0x2fe/0x3b0 [13634.939954] ? _copy_from_user+0x39/0x40 [13634.939964] ? sock_sendmsg+0x30/0x40 [13634.940159] ? ___sys_sendmsg+0x29d/0x2b0 [13634.940326] ? __alloc_pages_nodemask+0xdf/0x230 [13634.940478] ? mem_cgroup_commit_charge+0x7c/0x4e0 [13634.940592] ? mem_cgroup_try_charge+0x76/0x1a0 [13634.940701] ? __handle_mm_fault+0xdb9/0x10b0 [13634.940809] ? __sys_sendmsg+0x51/0x90 [13634.940917] ? entry_SYSCALL_64_fastpath+0x1e/0xad The problem is that the bridge's VLAN group is created after setting the default PVID, when registering the netdevice and executing its ndo_init(). Fix this by changing the order of both operations, so that br_changelink() is only processed after the netdevice is registered, when the VLAN group is already initialized. Fixes: b6677449dff6 ("bridge: netlink: call br_changelink() during br_dev_newlink()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Peter V. Saveliev <peter@svinota.eu> Tested-by: Peter V. Saveliev <peter@svinota.eu> Signed-off-by: David S. Miller <davem@davemloft.net> 12 April 2017, 02:22:44 UTC
b6fe044 bridge: implement missing ndo_uninit() While the bridge driver implements an ndo_init(), it was missing a symmetric ndo_uninit(), causing the different de-initialization operations to be scattered around its dellink() and destructor(). Implement a symmetric ndo_uninit() and remove the overlapping operations from its dellink() and destructor(). This is a prerequisite for the next patch, as it allows us to have a proper cleanup upon changelink() failure during the bridge's newlink(). Fixes: b6677449dff6 ("bridge: netlink: call br_changelink() during br_dev_newlink()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 April 2017, 02:22:44 UTC
785a470 scsi: ipr: do not set DID_PASSTHROUGH on CHECK CONDITION On a dual controller setup with multipath enabled, some MEDIUM ERRORs caused both paths to be failed, thus I/O got queued/blocked since the 'queue_if_no_path' feature is enabled by default on IPR controllers. This example disabled 'queue_if_no_path' so the I/O failure is seen at the sg_dd program. Notice that after the sg_dd test-case, both paths are in 'failed' state, and both path/priority groups are in 'enabled' state (not 'active') -- which would block I/O with 'queue_if_no_path'. # sg_dd if=/dev/dm-2 bs=4096 count=1 dio=1 verbose=4 blk_sgio=0 <...> read(unix): count=4096, res=-1 sg_dd: reading, skip=0 : Input/output error <...> # dmesg [...] sd 2:2:16:0: [sds] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [...] sd 2:2:16:0: [sds] Sense Key : Medium Error [current] [...] sd 2:2:16:0: [sds] Add. Sense: Unrecovered read error - recommend rewrite the data [...] sd 2:2:16:0: [sds] CDB: Read(10) 28 00 00 00 00 00 00 00 20 00 [...] blk_update_request: I/O error, dev sds, sector 0 [...] device-mapper: multipath: Failing path 65:32. <...> [...] device-mapper: multipath: Failing path 65:224. # multipath -l 1IBM_IPR-0_59C2AE0000001F80 dm-2 IBM ,IPR-0 59C2AE00 size=5.2T features='0' hwhandler='1 alua' wp=rw |-+- policy='service-time 0' prio=0 status=enabled | `- 2:2:16:0 sds 65:32 failed undef running `-+- policy='service-time 0' prio=0 status=enabled `- 1:2:7:0 sdae 65:224 failed undef running This is not the desired behavior. The dm-multipath explicitly checks for the MEDIUM ERROR case (and a few others) so not to fail the path (e.g., I/O to other sectors could potentially happen without problems). See dm-mpath.c :: do_end_io_bio() -> noretry_error() !->! fail_path(). The problem trace is: 1) ipr_scsi_done() // SENSE KEY/CHECK CONDITION detected, go to.. 2) ipr_erp_start() // ipr_is_gscsi() and masked_ioasc OK, go to.. 3) ipr_gen_sense() // masked_ioasc is IPR_IOASC_MED_DO_NOT_REALLOC, // so set DID_PASSTHROUGH. 4) scsi_decide_disposition() // check for DID_PASSTHROUGH and return // early on, faking a DID_OK.. *instead* // of reaching scsi_check_sense(). // Had it reached the latter, that would // set host_byte to DID_MEDIUM_ERROR. 5) scsi_finish_command() 6) scsi_io_completion() 7) __scsi_error_from_host_byte() // That would be converted to -ENODATA <...> 8) dm_softirq_done() 9) multipath_end_io() 10) do_end_io() 11) noretry_error() // And that is checked in dm-mpath :: noretry_error() // which would cause fail_path() not to be called. With this patch applied, the I/O is failed but the paths are not. This multipath device continues accepting more I/O requests without blocking. (and notice the different host byte/driver byte handling per SCSI layer). # dmesg [...] sd 2:2:7:0: [sdaf] Done: SUCCESS Result: hostbyte=0x13 driverbyte=DRIVER_OK [...] sd 2:2:7:0: [sdaf] CDB: Read(10) 28 00 00 00 00 00 00 00 40 00 [...] sd 2:2:7:0: [sdaf] Sense Key : Medium Error [current] [...] sd 2:2:7:0: [sdaf] Add. Sense: Unrecovered read error - recommend rewrite the data [...] blk_update_request: critical medium error, dev sdaf, sector 0 [...] blk_update_request: critical medium error, dev dm-6, sector 0 [...] sd 2:2:7:0: [sdaf] Done: SUCCESS Result: hostbyte=0x13 driverbyte=DRIVER_OK [...] sd 2:2:7:0: [sdaf] CDB: Read(10) 28 00 00 00 00 00 00 00 10 00 [...] sd 2:2:7:0: [sdaf] Sense Key : Medium Error [current] [...] sd 2:2:7:0: [sdaf] Add. Sense: Unrecovered read error - recommend rewrite the data [...] blk_update_request: critical medium error, dev sdaf, sector 0 [...] blk_update_request: critical medium error, dev dm-6, sector 0 [...] Buffer I/O error on dev dm-6, logical block 0, async page read # multipath -l 1IBM_IPR-0_59C2AE0000001F80 1IBM_IPR-0_59C2AE0000001F80 dm-6 IBM ,IPR-0 59C2AE00 size=5.2T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw |-+- policy='service-time 0' prio=0 status=active | `- 2:2:7:0 sdaf 65:240 active undef running `-+- policy='service-time 0' prio=0 status=enabled `- 1:2:7:0 sdh 8:112 active undef running Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 12 April 2017, 01:40:19 UTC
911e572 scsi: aacraid: fix PCI error recovery path During a PCI error recovery, if aac_check_health() is not aware that a PCI error happened and we have an offline PCI channel, it might trigger some errors (like NULL pointer dereference) and inhibit the error recovery process to complete. This patch makes the health check procedure aware of PCI channel issues, and in case of error recovery process, the function aac_adapter_check_health() returns -1 and let the recovery process to complete successfully. This patch was tested on upstream kernel v4.11-rc5 in PowerPC ppc64le architecture with adapter 9005:028d (VID:DID) - the error recovery procedure was able to recover fine. Fixes: 5c63f7f710bd ("aacraid: Added EEH support") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 12 April 2017, 00:45:59 UTC
0718b33 Merge tag 'perf-urgent-for-mingo-4.11-20170411' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull 'perf annotate' fix for s390: - The move to support cross arch annotation introduced per arch initialization requirements, fullfill them for s/390 (Christian Borntraeger) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> 11 April 2017, 19:41:39 UTC
a967efb Btrfs: fix potential use-after-free for cloned bio KASAN reports that there is a use-after-free case of bio in btrfs_map_bio. If we need to submit IOs to several disks at a time, the original bio would get cloned and mapped to the destination disk, but we really should use the original bio instead of a cloned bio to do the sanity check because cloned bios are likely to be freed by its endio. Reported-by: Diego <diegocg@gmail.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> 11 April 2017, 16:49:56 UTC
97bf5a5 Btrfs: fix segmentation fault when doing dio read Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks") introduced this bug during iterating bio pages in dio read's endio hook, and it could end up with segment fault of the dio reading task. So the reason is 'if (nr_sectors--)', and it makes the code assume that there is one more block in the same page, so page offset is increased and the bio which is created to repair the bad block then has an incorrect bvec.bv_offset, and a later access of the page content would throw a segmentation fault. This also adds ASSERT to check page offset against page size. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> 11 April 2017, 16:49:29 UTC
2e949b0 Btrfs: fix invalid dereference in btrfs_retry_endio When doing directIO repair, we have this oops: [ 1458.532816] general protection fault: 0000 [#1] SMP ... [ 1458.536291] Workqueue: btrfs-endio-repair btrfs_endio_repair_helper [btrfs] [ 1458.536893] task: ffff88082a42d100 task.stack: ffffc90002b3c000 [ 1458.537499] RIP: 0010:btrfs_retry_endio+0x7e/0x1a0 [btrfs] ... [ 1458.543261] Call Trace: [ 1458.543958] ? rcu_read_lock_sched_held+0xc4/0xd0 [ 1458.544374] bio_endio+0xed/0x100 [ 1458.544750] end_workqueue_fn+0x3c/0x40 [btrfs] [ 1458.545257] normal_work_helper+0x9f/0x900 [btrfs] [ 1458.545762] btrfs_endio_repair_helper+0x12/0x20 [btrfs] [ 1458.546224] process_one_work+0x34d/0xb70 [ 1458.546570] ? process_one_work+0x29e/0xb70 [ 1458.546938] worker_thread+0x1cf/0x960 [ 1458.547263] ? process_one_work+0xb70/0xb70 [ 1458.547624] kthread+0x17d/0x180 [ 1458.547909] ? kthread_create_on_node+0x70/0x70 [ 1458.548300] ret_from_fork+0x31/0x40 It turns out that btrfs_retry_endio is trying to get inode from a directIO page. This fixes the problem by using the saved inode pointer, done->inode. btrfs_retry_endio_nocsum has the same problem, and it's fixed as well. Also cleanup unused @start (which is too trivial for a separate patch). Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> 11 April 2017, 16:49:08 UTC
951e796 btrfs: drop the nossd flag when remounting with -o ssd The opposite case was already handled right in the very next switch entry. And also when turning on nossd, drop ssd_spread. Reported-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com> Signed-off-by: Adam Borowski <kilobyte@angband.pl> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> 11 April 2017, 16:48:59 UTC
96a94cc bpf: reference may_access_skb() from __bpf_prog_run() It took me quite some time to figure out how this was linked, so in order to save the next person the effort of finding it add a comment in __bpf_prog_run() that indicates what exactly determines that a program can access the ctx == skb. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> 11 April 2017, 14:54:27 UTC
0c45b36 drm/udl: Fix unaligned memory access in udl_render_hline On SPARC, the udl driver filled my kernel log with these messages: [186668.910612] Kernel unaligned access at TPC[76609c] udl_render_hline+0x13c/0x3a0 Use put_unaligned_be16 to avoid them. On x86 this results in the same code, but on SPARC the compiler emits two single-byte stores. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Acked-by: David Airlie <airlied@linux.ie> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170407200229.20642-1-j.neuschaefer@gmx.net 11 April 2017, 13:21:30 UTC
c053b5a drm/i915: Don't call synchronize_rcu_expedited under struct_mutex Only call synchronize_rcu_expedited after unlocking struct_mutex to avoid deadlock because the workqueues depend on struct_mutex. >From original patch by Andrea: synchronize_rcu/synchronize_sched/synchronize_rcu_expedited() will hang until its own workqueues are run. The i915 gem workqueues will wait on the struct_mutex to be released. So we cannot wait for a quiescent state using those rcu primitives while holding the struct_mutex or it creates a circular lock dependency resulting in kernel hangs (which is reproducible but goes undetected by lockdep). kswapd0 D 0 700 2 0x00000000 Call Trace: ? __schedule+0x1a5/0x660 ? schedule+0x36/0x80 ? _synchronize_rcu_expedited.constprop.65+0x2ef/0x300 ? wake_up_bit+0x20/0x20 ? rcu_stall_kick_kthreads.part.54+0xc0/0xc0 ? rcu_exp_wait_wake+0x530/0x530 ? i915_gem_shrink+0x34b/0x4b0 ? i915_gem_shrinker_scan+0x7c/0x90 ? i915_gem_shrinker_scan+0x7c/0x90 ? shrink_slab.part.61.constprop.72+0x1c1/0x3a0 ? shrink_zone+0x154/0x160 ? kswapd+0x40a/0x720 ? kthread+0xf4/0x130 ? try_to_free_pages+0x450/0x450 ? kthread_create_on_node+0x40/0x40 ? ret_from_fork+0x23/0x30 plasmashell D 0 4657 4614 0x00000000 Call Trace: ? __schedule+0x1a5/0x660 ? schedule+0x36/0x80 ? schedule_preempt_disabled+0xe/0x10 ? __mutex_lock.isra.4+0x1c9/0x790 ? i915_gem_close_object+0x26/0xc0 ? i915_gem_close_object+0x26/0xc0 ? drm_gem_object_release_handle+0x48/0x90 ? drm_gem_handle_delete+0x50/0x80 ? drm_ioctl+0x1fa/0x420 ? drm_gem_handle_create+0x40/0x40 ? pipe_write+0x391/0x410 ? __vfs_write+0xc6/0x120 ? do_vfs_ioctl+0x8b/0x5d0 ? SyS_ioctl+0x3b/0x70 ? entry_SYSCALL_64_fastpath+0x13/0x94 kworker/0:0 D 0 29186 2 0x00000000 Workqueue: events __i915_gem_free_work Call Trace: ? __schedule+0x1a5/0x660 ? schedule+0x36/0x80 ? schedule_preempt_disabled+0xe/0x10 ? __mutex_lock.isra.4+0x1c9/0x790 ? del_timer_sync+0x44/0x50 ? update_curr+0x57/0x110 ? __i915_gem_free_objects+0x31/0x300 ? __i915_gem_free_objects+0x31/0x300 ? __i915_gem_free_work+0x2d/0x40 ? process_one_work+0x13a/0x3b0 ? worker_thread+0x4a/0x460 ? kthread+0xf4/0x130 ? process_one_work+0x3b0/0x3b0 ? kthread_create_on_node+0x40/0x40 ? ret_from_fork+0x23/0x30 Fixes: 3d3d18f086cd ("drm/i915: Avoid rcu_barrier() from reclaim paths (shrinker)") Reported-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 8f612d055183545070ca1009ac2eb1f2e044cc20) Signed-off-by: Jani Nikula <jani.nikula@intel.com> 11 April 2017, 10:25:18 UTC
63987bf drm/i915: Suspend GuC prior to GPU Reset during GEM suspend i915 is currently doing a full GPU reset at the end of i915_gem_suspend() followed by GuC suspend in i915_drm_suspend(). This GPU reset clobbers the GuC, causing the suspend request to then fail, leaving the GuC in an undefined state. We need to tell the GuC to suspend before we do the direct intel_gpu_reset(). v2: Commit message update. (Chris, Daniele) Fixes: 1c777c5d1dcd ("drm/i915/hsw: Fix GPU hang during resume from S3-devices state") Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491387710-20553-1-git-send-email-sagar.a.kamble@intel.com Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit fd08923384385400101c71ac0d21d37d6b23b00d) Signed-off-by: Jani Nikula <jani.nikula@intel.com> 11 April 2017, 10:25:12 UTC
e5199a3 Merge tag 'gvt-fixes-2017-04-07' of https://github.com/01org/gvt-linux into drm-intel-fixes gvt-fixes-2017-04-07 - execlist csb initial read ptr fix (Min) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170407084240.4d2ig5ja2umcnsq3@zhen-hp.sh.intel.com 11 April 2017, 09:51:47 UTC
back to top