Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
0c8efd6 Linus Torvalds 12 March 2018, 00:25:09 UTC Linux 4.16-rc5 12 March 2018, 00:25:09 UTC
ed58d66 Linus Torvalds 11 March 2018, 21:59:23 UTC Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/pti updates from Thomas Gleixner: "Yet another pile of melted spectrum related updates: - Drop native vsyscall support finally as it causes more trouble than benefit. - Make microcode loading more robust. There were a few issues especially related to late loading which are now surfacing because late loading of the IB* microcodes addressing spectre issues has become more widely used. - Simplify and robustify the syscall handling in the entry code - Prevent kprobes on the entry trampoline code which lead to kernel crashes when the probe hits before CR3 is updated - Don't check microcode versions when running on hypervisors as they are considered as lying anyway. - Fix the 32bit objtool build and a coment typo" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Fix kernel crash when probing .entry_trampoline code x86/pti: Fix a comment typo x86/microcode: Synchronize late microcode loading x86/microcode: Request microcode on the BSP x86/microcode/intel: Look into the patch cache first x86/microcode: Do not upload microcode if CPUs are offline x86/microcode/intel: Writeback and invalidate caches before updating microcode x86/microcode/intel: Check microcode revision before updating sibling threads x86/microcode: Get rid of struct apply_microcode_ctx x86/spectre_v2: Don't check microcode versions when running under hypervisors x86/vsyscall/64: Drop "native" vsyscalls x86/entry/64/compat: Save one instruction in entry_INT80_compat() x86/entry: Do not special-case clone(2) in compat entry x86/syscalls: Use COMPAT_SYSCALL_DEFINEx() macros for x86-only compat syscalls x86/syscalls: Use proper syscall definition for sys_ioperm() x86/entry: Remove stale syscall prototype x86/syscalls/32: Simplify $entry == $compat entries objtool: Fix 32-bit build 11 March 2018, 21:59:23 UTC
1ad5daa Linus Torvalds 11 March 2018, 21:55:15 UTC Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "Just a single fix which adds a missing Kconfig dependency to avoid unmet dependency warnings" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependency 11 March 2018, 21:55:15 UTC
ebb3762 Linus Torvalds 11 March 2018, 21:52:41 UTC Merge branch 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS fixes from Thomas Gleixner: "Two small fixes for RAS/MCE: - Serialize sysfs changes to avoid concurrent modificaiton of underlying data - Add microcode revision to Machine Check records. This should have been there forever, but now with the broken microcode versions in the wild it has become important" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/MCE: Serialize sysfs changes x86/MCE: Save microcode revision in machine check records 11 March 2018, 21:52:41 UTC
8ad4424 Linus Torvalds 11 March 2018, 21:49:49 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Thomas Gleixner: "Another set of perf updates: - Fix a Skylake Uncore event format declaration - Prevent perf pipe mode from crahsing which was caused by a missing buffer allocation - Make the perf top popup message which tells the user that it uses fallback mode on older kernels a debug message. - Make perf context rescheduling work correcctly - Robustify the jump error drawing in perf browser mode so it does not try to create references to NULL initialized offset entries - Make trigger_on() robust so it does not enable the trigger before everything is set up correctly to handle it - Make perf auxtrace respect the --no-itrace option so it does not try to queue AUX data for decoding. - Prevent having different number of field separators in CVS output lines when a counter is not supported. - Make the perf kallsyms man page usage behave like it does for all other perf commands. - Synchronize the kernel headers" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix ctx_event_type in ctx_resched() perf tools: Fix trigger class trigger_on() perf auxtrace: Prevent decoding when --no-itrace perf stat: Fix CVS output format for non-supported counters tools headers: Sync x86's cpufeatures.h tools headers: Sync copy of kvm UAPI headers perf record: Fix crash in pipe mode perf annotate browser: Be more robust when drawing jump arrows perf top: Fix annoying fallback message on older kernels perf kallsyms: Fix the usage on the man page perf/x86/intel/uncore: Fix Skylake UPI event format 11 March 2018, 21:49:49 UTC
02bf0ef Linus Torvalds 11 March 2018, 21:46:54 UTC Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Thomas Gleixner: "rt_mutex_futex_unlock() grew a new irq-off call site, but the function assumes that its always called from irq enabled context. Use (un)lock_irqsafe() to handle the new call site correctly" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rtmutex: Make rt_mutex_futex_unlock() safe for irq-off callsites 11 March 2018, 21:46:54 UTC
abeb752 Linus Torvalds 11 March 2018, 20:07:14 UTC Merge tag 'dmaengine-fix-4.16-rc5' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "Two small fixes are for this cycle: - fix max_chunk_size for rcar-dmac for R-Car Gen3 - fix clock resource of mv_xor_v2" * tag 'dmaengine-fix-4.16-rc5' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: mv_xor_v2: Fix clock resource by adding a register clock dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3 11 March 2018, 20:07:14 UTC
d43be80 Linus Torvalds 11 March 2018, 20:05:15 UTC Merge tag 'gpio-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fix from Linus Walleij: "This is a single GPIO fix for the v4.16 series affecting the Renesas driver, and fixes wakeup from external stuff" * tag 'gpio-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: rcar: Use wakeup_path i.s.o. explicit clock handling 11 March 2018, 20:05:15 UTC
3cd2c31 Gregory CLEMENT 07 March 2018, 15:40:10 UTC dmaengine: mv_xor_v2: Fix clock resource by adding a register clock On the CP110 components which are present on the Armada 7K/8K SoC we need to explicitly enable the clock for the registers. However it is not needed for the AP8xx component, that's why this clock is optional. With this patch both clock have now a name, but in order to be backward compatible, the name of the first clock is not used. It allows to still use this clock with a device tree using the old binding. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 11 March 2018, 15:03:27 UTC
3266b5b Linus Torvalds 10 March 2018, 18:21:07 UTC Merge tag 'kbuild-fixes-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - make fixdep parse kconfig.h to fix missing rebuild - replace hyphens with underscores in builtin DTB label names - fix typos * tag 'kbuild-fixes-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: Handle builtin dtb file names containing hyphens scripts/bloat-o-meter: fix typos in help fixdep: do not ignore kconfig.h fixdep: remove some false CONFIG_ matches fixdep: remove stale references to uml-config.h 10 March 2018, 18:21:07 UTC
23b33ac Linus Torvalds 10 March 2018, 18:17:59 UTC Merge tag 'linux-watchdog-4.16-fixes-2' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog fixes from Wim Van Sebroeck: - f71808e_wdt: Fix magic close handling - sbsa: 32-bit read fix for WCV - hpwdt: Remove legacy NMI sourcing * tag 'linux-watchdog-4.16-fixes-2' of git://www.linux-watchdog.org/linux-watchdog: watchdog: hpwdt: Remove legacy NMI sourcing. watchdog: sbsa: use 32-bit read for WCV watchdog: f71808e_wdt: Fix magic close handling 10 March 2018, 18:17:59 UTC
91a2620 Linus Torvalds 10 March 2018, 16:48:01 UTC Merge tag 'for-linus-20180309' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: - a xen-blkfront fix from Bhavesh with a multiqueue fix when detaching/re-attaching - a few important NVMe fixes, including a revert for a sysfs fix that caused some user space confusion - two bcache fixes by way of Michael Lyle - a loop regression fix, fixing an issue with lost writes on DAX. * tag 'for-linus-20180309' of git://git.kernel.dk/linux-block: loop: Fix lost writes caused by missing flag nvme_fc: rework sqsize handling nvme-fabrics: Ignore nr_io_queues option for discovery controllers xen-blkfront: move negotiate_mq to cover all cases of new VBDs Revert "nvme: create 'slaves' and 'holders' entries for hidden controllers" bcache: don't attach backing with duplicate UUID bcache: fix crashes in duplicate cache device register nvme: pci: pass max vectors as num_possible_cpus() to pci_alloc_irq_vectors nvme-pci: Fix EEH failure on ppc 10 March 2018, 16:48:01 UTC
b3b25b1 Linus Torvalds 10 March 2018, 16:45:44 UTC Merge tag 'for-4.16/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix an uninitialized variable false warning in dm bufio - Fix DM's passthrough ioctl support to be race free against an underlying device being removed. - Fix corner-case of DM raid resync reporting if/when the raid becomes degraded during resync; otherwise automated raid repair will fail. - A few DM multipath fixes to make non-SCSI optimizations, that were introduced during the 4.16 merge, useful for all non-SCSI devices, rather than narrowly define this non-SCSI mode in terms of "nvme". This allows the removal of "queue_mode nvme" that really didn't need to be introduced. Instead DM core will internalize whether nvme-specific IO submission optimizations are doable and DM multipath will only do SCSI-specific device handler operations if SCSI is in use. * tag 'for-4.16/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm table: allow upgrade from bio-based to specialized bio-based variant dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks dm table: fix "nvme" test dm raid: fix incorrect sync_ratio when degraded dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl dm bufio: avoid false-positive Wmaybe-uninitialized warning 10 March 2018, 16:45:44 UTC
2f64e70 Linus Torvalds 10 March 2018, 16:38:01 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma fixes from Doug Ledford: - Various driver bug fixes in mlx5, mlx4, bnxt_re and qedr, ranging from bugs under load to bad error case handling - There in one largish patch fixing the locking in bnxt_re to avoid a machine hard lock situation - A few core bugs on error paths - A patch to reduce stack usage in the new CQ API - One mlx5 regression introduced in this merge window - There were new syzkaller scripts written for the RDMA subsystem and we are fixing issues found by the bot - One of the commits (aa0de36a40f4 “RDMA/mlx5: Fix integer overflow while resizing CQ”) is missing part of the commit log message and one of the SOB lines. The original patch was from Leon Romanovsky, and a cut-n-paste separator in the commit message confused patchworks which then put the end of message separator in the wrong place in the downloaded patch, and I didn’t notice in time. The patch made it into the official branch, and the only way to fix it in-place was to rebase. Given the pain that a rebase causes, and the fact that the patch has relevant tags for stable and syzkaller, a revert of the munged patch and a reapplication of the original patch with the log message intact was done. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (25 commits) RDMA/mlx5: Fix integer overflow while resizing CQ Revert "RDMA/mlx5: Fix integer overflow while resizing CQ" RDMA/ucma: Check that user doesn't overflow QP state RDMA/mlx5: Fix integer overflow while resizing CQ RDMA/ucma: Limit possible option size IB/core: Fix possible crash to access NULL netdev RDMA/bnxt_re: Avoid Hard lockup during error CQE processing RDMA/core: Reduce poll batch for direct cq polling IB/mlx5: Fix an error code in __mlx5_ib_modify_qp() IB/mlx5: When not in dual port RoCE mode, use provided port as native IB/mlx4: Include GID type when deleting GIDs from HW table under RoCE IB/mlx4: Fix corruption of RoCEv2 IPv4 GIDs RDMA/qedr: Fix iWARP write and send with immediate RDMA/qedr: Fix kernel panic when running fio over NFSoRDMA RDMA/qedr: Fix iWARP connect with port mapper RDMA/qedr: Fix ipv6 destination address resolution IB/core : Add null pointer check in addr_resolve RDMA/bnxt_re: Fix the ib_reg failure cleanup RDMA/bnxt_re: Fix incorrect DB offset calculation RDMA/bnxt_re: Unconditionly fence non wire memory operations ... 10 March 2018, 16:38:01 UTC
b3337a6 Linus Torvalds 10 March 2018, 16:35:29 UTC Merge tag 'platform-drivers-x86-v4.16-6' of git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "Correct a module loading race condition between the DELL_SMBIOS backend modules and the first user by converting them to bool features of the DELL_SMBIOS driver. Fixup the resulting Kconfig dependency issue with DCDBAS" * tag 'platform-drivers-x86-v4.16-6' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: dell-smbios: Resolve dependency error on DCDBAS platform/x86: Allow for SMBIOS backend defaults platform/x86: dell-smbios: Link all dell-smbios-* modules together platform/x86: dell-smbios: Rename dell-smbios source to dell-smbios-base platform/x86: dell-smbios: Correct some style warnings 10 March 2018, 16:35:29 UTC
cdb06e9 Linus Torvalds 10 March 2018, 00:59:19 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fixes from Radim Krčmář: "PPC: - Fix guest time accounting in the host - Fix large-page backing for radix guests on POWER9 - Fix HPT guests on POWER9 backed by 2M or 1G pages - Compile fixes for some configs and gcc versions s390: - Fix random memory corruption when running as guest2 (e.g. KVM in LPAR) and starting guest3 (e.g. nested KVM) with many CPUs - Export forgotten io interrupt delivery statistics counter" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: fix memory overwrites when not using SCA entries KVM: PPC: Book3S HV: Fix guest time accounting with VIRT_CPU_ACCOUNTING_GEN KVM: PPC: Book3S HV: Fix VRMA initialization with 2MB or 1GB memory backing KVM: PPC: Book3S HV: Fix handling of large pages in radix page fault handler KVM: s390: provide io interrupt kvm_stat KVM: PPC: Book3S: Fix compile error that occurs with some gcc versions KVM: PPC: Fix compile error that occurs when CONFIG_ALTIVEC=n 10 March 2018, 00:59:19 UTC
3961448 Linus Torvalds 10 March 2018, 00:54:18 UTC Merge tag 'for-linus-4.16a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "Just one fix for the correct error handling after a failed device_register()" * tag 'for-linus-4.16a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: xenbus: use put_device() instead of kfree() 10 March 2018, 00:54:18 UTC
4178802 Linus Torvalds 10 March 2018, 00:49:30 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - The SMCCC firmware interface for the spectre variant 2 mitigation has been updated to allow the discovery of whether the CPU needs the workaround. This pull request relaxes the kernel check on the return value from firmware. - Fix the commit allowing changing from global to non-global page table entries which inadvertently disallowed other safe attribute changes. - Fix sleeping in atomic during the arm_perf_teardown_cpu() code. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Relax ARM_SMCCC_ARCH_WORKAROUND_1 discovery arm_pmu: Use disable_irq_nosync when disabling SPI in CPU teardown hook arm64: mm: fix thinko in non-global page table attribute check 10 March 2018, 00:49:30 UTC
ed3c4df Linus Torvalds 10 March 2018, 00:45:57 UTC Merge tag 'docs-4.16-fix' of git://git.lwn.net/linux Pull Documentation build fix from Jonathan Corbet: "The Sphinx 1.7 release broke the build process for reasons that are mostly our fault. This is a single fix cherry-picked from docs-next that restores docs buildability for all supported Sphinx versions" * tag 'docs-4.16-fix' of git://git.lwn.net/linux: Documentation/sphinx: Fix Directive import error 10 March 2018, 00:45:57 UTC
cfc79ae Linus Torvalds 10 March 2018, 00:42:25 UTC Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "8 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: lib/test_kmod.c: fix limit check on number of test devices created selftests/vm/run_vmtests: adjust hugetlb size according to nr_cpus mm/page_alloc: fix memmap_init_zone pageblock alignment mm/memblock.c: hardcode the end_pfn being -1 mm/gup.c: teach get_user_pages_unlocked to handle FOLL_NOWAIT lib/bug.c: exclude non-BUG/WARN exceptions from report_bug() bug: use %pB in BUG and stack protector failure hugetlb: fix surplus pages accounting 10 March 2018, 00:42:25 UTC
ac68b1b Luis R. Rodriguez 09 March 2018, 23:51:20 UTC lib/test_kmod.c: fix limit check on number of test devices created As reported by Dan the parentheses is in the wrong place, and since unlikely() call returns either 0 or 1 it's never less than zero. The second issue is that signed integer overflows like "INT_MAX + 1" are undefined behavior. Since num_test_devs represents the number of devices, we want to stop prior to hitting the max, and not rely on the wrap arround at all. So just cap at num_test_devs + 1, prior to assigning a new device. Link: http://lkml.kernel.org/r/20180224030046.24238-1-mcgrof@kernel.org Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 10 March 2018, 00:40:02 UTC
0627be7 Li Zhijian 09 March 2018, 23:51:16 UTC selftests/vm/run_vmtests: adjust hugetlb size according to nr_cpus Fix userfaultfd_hugetlb on hosts which have more than 64 cpus. --------------------------- running userfaultfd_hugetlb --------------------------- invalid MiB Usage: <MiB> <bounces> [FAIL] Via userfaultfd.c we can know, hugetlb_size needs to meet hugetlb_size >= nr_cpus * hugepage_size. hugepage_size is often 2M, so when host cpus > 64, it requires more than 128M. [zhijianx.li@intel.com: update changelog/comments and variable name] Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com Link: http://lkml.kernel.org/r/20180303125027.81638-1-zhijianx.li@intel.com Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com Signed-off-by: Li Zhijian <zhijianx.li@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: SeongJae Park <sj38.park@gmail.com> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 10 March 2018, 00:40:01 UTC
864b75f Daniel Vacek 09 March 2018, 23:51:13 UTC mm/page_alloc: fix memmap_init_zone pageblock alignment Commit b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns where possible") introduced a bug where move_freepages() triggers a VM_BUG_ON() on uninitialized page structure due to pageblock alignment. To fix this, simply align the skipped pfns in memmap_init_zone() the same way as in move_freepages_block(). Seen in one of the RHEL reports: crash> log | grep -e BUG -e RIP -e Call.Trace -e move_freepages_block -e rmqueue -e freelist -A1 kernel BUG at mm/page_alloc.c:1389! invalid opcode: 0000 [#1] SMP -- RIP: 0010:[<ffffffff8118833e>] [<ffffffff8118833e>] move_freepages+0x15e/0x160 RSP: 0018:ffff88054d727688 EFLAGS: 00010087 -- Call Trace: [<ffffffff811883b3>] move_freepages_block+0x73/0x80 [<ffffffff81189e63>] __rmqueue+0x263/0x460 [<ffffffff8118c781>] get_page_from_freelist+0x7e1/0x9e0 [<ffffffff8118caf6>] __alloc_pages_nodemask+0x176/0x420 -- RIP [<ffffffff8118833e>] move_freepages+0x15e/0x160 RSP <ffff88054d727688> crash> page_init_bug -v | grep RAM <struct resource 0xffff88067fffd2f8> 1000 - 9bfff System RAM (620.00 KiB) <struct resource 0xffff88067fffd3a0> 100000 - 430bffff System RAM ( 1.05 GiB = 1071.75 MiB = 1097472.00 KiB) <struct resource 0xffff88067fffd410> 4b0c8000 - 4bf9cfff System RAM ( 14.83 MiB = 15188.00 KiB) <struct resource 0xffff88067fffd480> 4bfac000 - 646b1fff System RAM (391.02 MiB = 400408.00 KiB) <struct resource 0xffff88067fffd560> 7b788000 - 7b7fffff System RAM (480.00 KiB) <struct resource 0xffff88067fffd640> 100000000 - 67fffffff System RAM ( 22.00 GiB) crash> page_init_bug | head -6 <struct resource 0xffff88067fffd560> 7b788000 - 7b7fffff System RAM (480.00 KiB) <struct page 0xffffea0001ede200> 1fffff00000000 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096 1048575 <struct page 0xffffea0001ede200> 505736 505344 <struct page 0xffffea0001ed8000> 505855 <struct page 0xffffea0001edffc0> <struct page 0xffffea0001ed8000> 0 0 <struct pglist_data 0xffff88047ffd9000> 0 <struct zone 0xffff88047ffd9000> DMA 1 4095 <struct page 0xffffea0001edffc0> 1fffff00000400 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096 1048575 BUG, zones differ! Note that this range follows two not populated sections 68000000-77ffffff in this zone. 7b788000-7b7fffff is the first one after a gap. This makes memmap_init_zone() skip all the pfns up to the beginning of this range. But this range is not pageblock (2M) aligned. In fact no range has to be. crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b787000 7b788000 PAGE PHYSICAL MAPPING INDEX CNT FLAGS ffffea0001e00000 78000000 0 0 0 0 ffffea0001ed7fc0 7b5ff000 0 0 0 0 ffffea0001ed8000 7b600000 0 0 0 0 <<<< ffffea0001ede1c0 7b787000 0 0 0 0 ffffea0001ede200 7b788000 0 0 1 1fffff00000000 Top part of page flags should contain nodeid and zonenr, which is not the case for page ffffea0001ed8000 here (<<<<). crash> log | grep -o fffea0001ed[^\ ]* | sort -u fffea0001ed8000 fffea0001eded20 fffea0001edffc0 crash> bt -r | grep -o fffea0001ed[^\ ]* | sort -u fffea0001ed8000 fffea0001eded00 fffea0001eded20 fffea0001edffc0 Initialization of the whole beginning of the section is skipped up to the start of the range due to the commit b92df1de5d28. Now any code calling move_freepages_block() (like reusing the page from a freelist as in this example) with a page from the beginning of the range will get the page rounded down to start_page ffffea0001ed8000 and passed to move_freepages() which crashes on assertion getting wrong zonenr. > VM_BUG_ON(page_zone(start_page) != page_zone(end_page)); Note, page_zone() derives the zone from page flags here. From similar machine before commit b92df1de5d28: crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b7fe000 7b7ff000 PAGE PHYSICAL MAPPING INDEX CNT FLAGS fffff73941e00000 78000000 0 0 1 1fffff00000000 fffff73941ed7fc0 7b5ff000 0 0 1 1fffff00000000 fffff73941ed8000 7b600000 0 0 1 1fffff00000000 fffff73941edff80 7b7fe000 0 0 1 1fffff00000000 fffff73941edffc0 7b7ff000 ffff8e67e04d3ae0 ad84 1 1fffff00020068 uptodate,lru,active,mappedtodisk All the pages since the beginning of the section are initialized. move_freepages()' not gonna blow up. The same machine with this fix applied: crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b7fe000 7b7ff000 PAGE PHYSICAL MAPPING INDEX CNT FLAGS ffffea0001e00000 78000000 0 0 0 0 ffffea0001e00000 7b5ff000 0 0 0 0 ffffea0001ed8000 7b600000 0 0 1 1fffff00000000 ffffea0001edff80 7b7fe000 0 0 1 1fffff00000000 ffffea0001edffc0 7b7ff000 ffff88017fb13720 8 2 1fffff00020068 uptodate,lru,active,mappedtodisk At least the bare minimum of pages is initialized preventing the crash as well. Customers started to report this as soon as 7.4 (where b92df1de5d28 was merged in RHEL) was released. I remember reports from September/October-ish times. It's not easily reproduced and happens on a handful of machines only. I guess that's why. But that does not make it less serious, I think. Though there actually is a report here: https://bugzilla.kernel.org/show_bug.cgi?id=196443 And there are reports for Fedora from July: https://bugzilla.redhat.com/show_bug.cgi?id=1473242 and CentOS: https://bugs.centos.org/view.php?id=13964 and we internally track several dozens reports for RHEL bug https://bugzilla.redhat.com/show_bug.cgi?id=1525121 Link: http://lkml.kernel.org/r/0485727b2e82da7efbce5f6ba42524b429d0391a.1520011945.git.neelx@redhat.com Fixes: b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns where possible") Signed-off-by: Daniel Vacek <neelx@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 10 March 2018, 00:40:01 UTC
379b03b Daniel Vacek 09 March 2018, 23:51:09 UTC mm/memblock.c: hardcode the end_pfn being -1 This is just a cleanup. It aids handling the special end case in the next commit. [akpm@linux-foundation.org: make it work against current -linus, not against -mm] [akpm@linux-foundation.org: make it work against current -linus, not against -mm some more] Link: http://lkml.kernel.org/r/1ca478d4269125a99bcfb1ca04d7b88ac1aee924.1520011944.git.neelx@redhat.com Signed-off-by: Daniel Vacek <neelx@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 10 March 2018, 00:40:01 UTC
96312e6 Andrea Arcangeli 09 March 2018, 23:51:06 UTC mm/gup.c: teach get_user_pages_unlocked to handle FOLL_NOWAIT KVM is hanging during postcopy live migration with userfaultfd because get_user_pages_unlocked is not capable to handle FOLL_NOWAIT. Earlier FOLL_NOWAIT was only ever passed to get_user_pages. Specifically faultin_page (the callee of get_user_pages_unlocked caller) doesn't know that if FAULT_FLAG_RETRY_NOWAIT was set in the page fault flags, when VM_FAULT_RETRY is returned, the mmap_sem wasn't actually released (even if nonblocking is not NULL). So it sets *nonblocking to zero and the caller won't release the mmap_sem thinking it was already released, but it wasn't because of FOLL_NOWAIT. Link: http://lkml.kernel.org/r/20180302174343.5421-2-aarcange@redhat.com Fixes: ce53053ce378c ("kvm: switch get_user_page_nowait() to get_user_pages_unlocked()") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 10 March 2018, 00:40:01 UTC
1b4cfe3 Kees Cook 09 March 2018, 23:51:02 UTC lib/bug.c: exclude non-BUG/WARN exceptions from report_bug() Commit b8347c219649 ("x86/debug: Handle warnings before the notifier chain, to fix KGDB crash") changed the ordering of fixups, and did not take into account the case of x86 processing non-WARN() and non-BUG() exceptions. This would lead to output of a false BUG line with no other information. In the case of a refcount exception, it would be immediately followed by the refcount WARN(), producing very strange double-"cut here": lkdtm: attempting bad refcount_inc() overflow ------------[ cut here ]------------ Kernel BUG at 0000000065f29de5 [verbose debug info unavailable] ------------[ cut here ]------------ refcount_t overflow at lkdtm_REFCOUNT_INC_OVERFLOW+0x6b/0x90 in cat[3065], uid/euid: 0/0 WARNING: CPU: 0 PID: 3065 at kernel/panic.c:657 refcount_error_report+0x9a/0xa4 ... In the prior ordering, exceptions were searched first: do_trap_no_signal(struct task_struct *tsk, int trapnr, char *str, ... if (fixup_exception(regs, trapnr)) return 0; - if (fixup_bug(regs, trapnr)) - return 0; - As a result, fixup_bugs()'s is_valid_bugaddr() didn't take into account needing to search the exception list first, since that had already happened. So, instead of searching the exception list twice (once in is_valid_bugaddr() and then again in fixup_exception()), just add a simple sanity check to report_bug() that will immediately bail out if a BUG() (or WARN()) entry is not found. Link: http://lkml.kernel.org/r/20180301225934.GA34350@beast Fixes: b8347c219649 ("x86/debug: Handle warnings before the notifier chain, to fix KGDB crash") Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Richard Weinberger <richard.weinberger@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 10 March 2018, 00:40:01 UTC
0862ca4 Kees Cook 09 March 2018, 23:50:59 UTC bug: use %pB in BUG and stack protector failure The BUG and stack protector reports were still using a raw %p. This changes it to %pB for more meaningful output. Link: http://lkml.kernel.org/r/20180301225704.GA34198@beast Fixes: ad67b74d2469 ("printk: hash addresses printed with %p") Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Richard Weinberger <richard.weinberger@gmail.com>, Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 10 March 2018, 00:40:01 UTC
4704dea Michal Hocko 09 March 2018, 23:50:55 UTC hugetlb: fix surplus pages accounting Dan Rue has noticed that libhugetlbfs test suite fails counter test: # mount_point="/mnt/hugetlb/" # echo 200 > /proc/sys/vm/nr_hugepages # mkdir -p "${mount_point}" # mount -t hugetlbfs hugetlbfs "${mount_point}" # export LD_LIBRARY_PATH=/root/libhugetlbfs/libhugetlbfs-2.20/obj64 # /root/libhugetlbfs/libhugetlbfs-2.20/tests/obj64/counters Starting testcase "/root/libhugetlbfs/libhugetlbfs-2.20/tests/obj64/counters", pid 3319 Base pool size: 0 Clean... FAIL Line 326: Bad HugePages_Total: expected 0, actual 1 The bug was bisected to 0c397daea1d4 ("mm, hugetlb: further simplify hugetlb allocation API"). The reason is that alloc_surplus_huge_page() misaccounts per node surplus pages. We should increase surplus_huge_pages_node rather than nr_huge_pages_node which is already handled by alloc_fresh_huge_page. Link: http://lkml.kernel.org/r/20180221191439.GM2231@dhcp22.suse.cz Fixes: 0c397daea1d4 ("mm, hugetlb: further simplify hugetlb allocation API") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Dan Rue <dan.rue@linaro.org> Tested-by: Dan Rue <dan.rue@linaro.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 10 March 2018, 00:40:01 UTC
28e9091 Leon Romanovsky 07 March 2018, 13:29:09 UTC RDMA/mlx5: Fix integer overflow while resizing CQ The user can provide very large cqe_size which will cause to integer overflow as it can be seen in the following UBSAN warning: ======================================================================= UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/cq.c:1192:53 signed integer overflow: 64870 * 65536 cannot be represented in type 'int' CPU: 0 PID: 267 Comm: syzkaller605279 Not tainted 4.15.0+ #90 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ? dma_virt_map_sg+0x22c/0x22c ubsan_epilogue+0xe/0x81 handle_overflow+0x1f3/0x251 ? __ubsan_handle_negate_overflow+0x19b/0x19b ? lock_acquire+0x440/0x440 mlx5_ib_resize_cq+0x17e7/0x1e40 ? cyc2ns_read_end+0x10/0x10 ? native_read_msr_safe+0x6c/0x9b ? cyc2ns_read_end+0x10/0x10 ? mlx5_ib_modify_cq+0x220/0x220 ? sched_clock_cpu+0x18/0x200 ? lookup_get_idr_uobject+0x200/0x200 ? rdma_lookup_get_uobject+0x145/0x2f0 ib_uverbs_resize_cq+0x207/0x3e0 ? ib_uverbs_ex_create_cq+0x250/0x250 ib_uverbs_write+0x7f9/0xef0 ? cyc2ns_read_end+0x10/0x10 ? print_irqtrace_events+0x280/0x280 ? ib_uverbs_ex_create_cq+0x250/0x250 ? uverbs_devnode+0x110/0x110 ? sched_clock_cpu+0x18/0x200 ? do_raw_spin_trylock+0x100/0x100 ? __lru_cache_add+0x16e/0x290 __vfs_write+0x10d/0x700 ? uverbs_devnode+0x110/0x110 ? kernel_read+0x170/0x170 ? sched_clock_cpu+0x18/0x200 ? security_file_permission+0x93/0x260 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x1e/0x8b RIP: 0033:0x433549 RSP: 002b:00007ffe63bd1ea8 EFLAGS: 00000217 ======================================================================= Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 3.13 Fixes: bde51583f49b ("IB/mlx5: Add support for resize CQ") Reported-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 09 March 2018, 23:10:48 UTC
212a0cb Doug Ledford 09 March 2018, 23:07:46 UTC Revert "RDMA/mlx5: Fix integer overflow while resizing CQ" The original commit of this patch has a munged log message that is missing several of the tags the original author intended to be on the patch. This was due to patchworks misinterpreting a cut-n-paste separator line as an end of message line and munging the mbox that was used to import the patch: https://patchwork.kernel.org/patch/10264089/ The original patch will be reapplied with a fixed commit message so the proper tags are applied. This reverts commit aa0de36a40f446f5a21a7c1e677b98206e242edb. Signed-off-by: Doug Ledford <dledford@redhat.com> 09 March 2018, 23:07:46 UTC
c68a2cf Linus Torvalds 09 March 2018, 21:31:08 UTC Merge tag 'pci-v4.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - fix sparc build issue when OF_IRQ not enabled (Guenter Roeck) - fix enumeration of devices below switches on DesignWare-based controllers (Koen Vandeputte) * tag 'pci-v4.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: dwc: Fix enumeration end when reaching root subordinate PCI: Move of_irq_parse_and_map_pci() declaration under OF_IRQ 09 March 2018, 21:31:08 UTC
99d7d64 Linus Torvalds 09 March 2018, 21:25:21 UTC Merge tag 'fbdev-v4.16-rc5' of git://github.com/bzolnier/linux Pull fbdev fix from Bartlomiej Zolnierkiewicz: "Just a single fix to close a kernel data leak in FBIOGETCMAP_SPARC ioctl" * tag 'fbdev-v4.16-rc5' of git://github.com/bzolnier/linux: fbdev: Fixing arbitrary kernel leak in case FBIOGETCMAP_SPARC in sbusfb_ioctl_helper(). 09 March 2018, 21:25:21 UTC
65307f2 Linus Torvalds 09 March 2018, 21:18:02 UTC Merge tag 'drm-fixes-for-v4.16-rc5' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "There are a small set of sun4i and i915 fixes, and many more amdgpu fixes: sun4i: - divide by zero fix - clock and LVDS fixes i915: - fix for perf - race fix amdgpu: - a bit more than we are normally comfortable with at this point, however it does fix a lot of display issues with the new DC code which result in black screens in various configurations along with some run of the mill gpu configuration fixes. I'm happy enough that the fixes are limited to the DC code and should fix a bunch of issues on the new raven ridge APUs that we are seeing shipped now" * tag 'drm-fixes-for-v4.16-rc5' of git://people.freedesktop.org/~airlied/linux: (42 commits) drm/amd/display: validate plane format on primary plane drm/amdgpu:Always save uvd vcpu_bo in VM Mode drm/amdgpu:Correct max uvd handles drm/amd/display: early return if not in vga mode in disable_vga drm/amd/display: Fix takover from VGA mode drm/amd/display: Fix memleaks when atomic check fails. drm/amd/display: Return success when enabling interrupt drm/amd/display: Use crtc enable/disable_vblank hooks drm/amd/display: update infoframe after dig fe is turned on drm/amd/display: fix boot-up on vega10 drm/amd/display: fix cursor related Pstate hang drm/amd/display: Set irq state only on existing crtcs drm/amd/display: Fixed non-native modes not lighting up drm/amd/display: Call update_stream_signal directly from amdgpu_dm drm/amd/display: Make create_stream_for_sink more consistent drm/amd/display: Don't block dual-link DVI modes drm/amd/display: Don't allow dual-link DVI on all ASICs. drm/amd/display: Pass signal directly to enable_tmds_output drm/amd/display: Remove unnecessary fail labels in create_stream_for_sink drm/amd/display: Move MAX_TMDS_CLOCK define to header ... 09 March 2018, 21:18:02 UTC
dfbab3f Linus Torvalds 09 March 2018, 18:01:59 UTC Merge tag 'sound-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Two type of fixes: - The usual stuff, a handful HD-audio quirks for various machines - Further hardening against ALSA sequencer ioctl/write races that are triggered by fuzzer" * tag 'sound-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda: add dock and led support for HP ProBook 640 G2 ALSA: hda: add dock and led support for HP EliteBook 820 G3 ALSA: hda/realtek - Make dock sound work on ThinkPad L570 ALSA: seq: Remove superfluous snd_seq_queue_client_leave_cells() call ALSA: seq: More protection for concurrent write and ioctl races ALSA: seq: Don't allow resizing pool in use ALSA: hda/realtek - Fix dock line-out volume on Dell Precision 7520 ALSA: hda/realtek: Limit mic boost on T480 ALSA: hda/realtek - Add headset mode support for Dell laptop ALSA: hda/realtek - Add support headset mode for DELL WYSE ALSA: hda - Fix a wrong FIXUP for alc289 on Dell machines 09 March 2018, 18:01:59 UTC
e21da1c Marc Zyngier 09 March 2018, 15:40:50 UTC arm64: Relax ARM_SMCCC_ARCH_WORKAROUND_1 discovery A recent update to the ARM SMCCC ARCH_WORKAROUND_1 specification allows firmware to return a non zero, positive value to describe that although the mitigation is implemented at the higher exception level, the CPU on which the call is made is not affected. Let's relax the check on the return value from ARCH_WORKAROUND_1 so that we only error out if the returned value is negative. Fixes: b092201e0020 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 09 March 2018, 17:52:07 UTC
719ea86 Linus Torvalds 09 March 2018, 17:46:14 UTC Merge branch 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fixes from Miklos Szeredi: "This fixes a corner case for NFS exporting (introduced in this cycle) as well as fixing miscellaneous bugs" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: update Kconfig texts ovl: redirect_dir=nofollow should not follow redirect for opaque lower ovl: fix ptr_ret.cocci warnings ovl: check ERR_PTR() return value from ovl_lookup_real() ovl: check lower ancestry on encode of lower dir file handle ovl: hash non-dir by lower inode for fsnotify 09 March 2018, 17:46:14 UTC
ff690ee Matthew Wilcox 02 March 2018, 18:40:14 UTC Documentation/sphinx: Fix Directive import error Sphinx 1.7 removed sphinx.util.compat.Directive so people who have upgraded cannot build the documentation. Switch to docutils.parsers.rst.Directive which has been available since docutils 0.5 released in 2009. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1083694 Co-developed-by: Takashi Iwai <tiwai@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> 09 March 2018, 17:46:14 UTC
2d9b1d6 Linus Torvalds 09 March 2018, 17:37:29 UTC Merge tag 'xfs-4.16-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs fixes from Darrick Wong: - Fix some iomap locking problems - Don't allocate cow blocks when we're zeroing file data * tag 'xfs-4.16-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: don't block on the ilock for RWF_NOWAIT xfs: don't start out with the exclusive ilock for direct I/O xfs: don't allocate COW blocks for zeroing holes or unwritten extents 09 March 2018, 17:37:29 UTC
32d7b19 Darren Hart (VMware) 07 March 2018, 02:01:04 UTC platform/x86: dell-smbios: Resolve dependency error on DCDBAS When the DELL_SMBIOS_SMM backend is enabled, the DELL_SMBIOS symbol depends on DELL_DCDBAS, and we must avoid the situation where DELL_SMBIOS=y and DCDBAS=m. Adding the conditional dependency to DELL_SMBIOS such as: depends !DELL_SMBIOS_SMM || (DCDBAS || DCDBAS=n) results in the Kconfig tooling complaining about a circular dependency, although it appears to work in practice. Avoid the errors by simplifying the dependency and forcing DELL_SMBIOS to be <= DCDBAS if DCDBAS is enabled (thanks to Greg KH for the suggestion). Cc: Mario.Limonciello@dell.com Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> 09 March 2018, 17:35:46 UTC
329d58b Darren Hart (VMware) 03 March 2018, 01:40:32 UTC platform/x86: Allow for SMBIOS backend defaults Avoid accidental configurations by setting default y for DELL_SMBIOS backends. Avoid this impacting the default build size, by making them dependent on DELL_SMBIOS, so they only appear when DELL_SMBIOS is manually selected, or by DELL_LAPTOP or DELL_WMI. While DELL_SMBIOS does have a prompt, it does not have any dependencies. Keeping DELL_SMBIOS visible, despite being "select"ed by DELL_LAPTOP and DELL_WMI, is a deliberate choice to provide context for the WMI and SMM backends, which would otherwise appear to float without context within the menu. Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> 09 March 2018, 17:35:44 UTC
25d4702 Mario Limonciello 27 February 2018, 18:23:04 UTC platform/x86: dell-smbios: Link all dell-smbios-* modules together Some race conditions were raised due to dell-smbios and its backends not being ready by the time that a consumer would call one of the exported methods. To avoid this problem, guarantee that all initialization has been done by linking them all together and running init for them all. As part of this change the Kconfig needs to be adjusted so that CONFIG_DELL_SMBIOS_SMM and CONFIG_DELL_SMBIOS_WMI are boolean rather than modules. CONFIG_DELL_SMBIOS is a visually selectable option again and both CONFIG_DELL_SMBIOS_WMI and CONFIG_DELL_SMBIOS_SMM are optional. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> [dvhart: Update prompt and help text for DELL_SMBIOS_* backends] Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> 09 March 2018, 17:35:42 UTC
94f77cb Mario Limonciello 27 February 2018, 18:23:03 UTC platform/x86: dell-smbios: Rename dell-smbios source to dell-smbios-base This is being done to faciliate a later change to link all the dell-smbios drivers together. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> 09 March 2018, 17:35:30 UTC
b535396 Mario Limonciello 27 February 2018, 18:23:02 UTC platform/x86: dell-smbios: Correct some style warnings WARNING: function definition argument 'struct calling_interface_buffer *' should also have an identifier name + int (*call_fn)(struct calling_interface_buffer *); WARNING: Block comments use * on subsequent lines + /* 4 bytes of table header, plus 7 bytes of Dell header, plus at least + 6 bytes of entry */ WARNING: Block comments use a trailing */ on a separate line + 6 bytes of entry */ Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> 09 March 2018, 17:35:16 UTC
a525df0 Linus Torvalds 09 March 2018, 17:33:48 UTC Merge tag 'powerpc-4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One notable fix to properly advertise our support for a new firmware feature, caused by two series conflicting semantically but not textually. There's a new ioctl for the new ocxl driver, which is not a fix, but needed to complete the userspace API and good to have before the driver is in a released kernel. Finally three minor selftest fixes, and a fix for intermittent build failures for some obscure platforms, caused by a missing make dependency. Thanks to: Alastair D'Silva, Bharata B Rao, Guenter Roeck" * tag 'powerpc-4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Fix vector5 in ibm architecture vector table ocxl: Document the OCXL_IOCTL_GET_METADATA IOCTL ocxl: Add get_metadata IOCTL to share OCXL information to userspace selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable selftests/powerpc: Fix missing clean of pmu/lib.o powerpc/boot: Fix random libfdt related build errors selftests/powerpc: Skip tm-trap if transactional memory is not enabled 09 March 2018, 17:33:48 UTC
1d03757 Ross Zwisler 09 March 2018, 15:36:36 UTC loop: Fix lost writes caused by missing flag The following commit: commit aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC") replaced __do_lo_send_write(), which used ITER_KVEC iterators, with lo_write_bvec() which uses ITER_BVEC iterators. In this change, though, the WRITE flag was lost: - iov_iter_kvec(&from, ITER_KVEC | WRITE, &kvec, 1, len); + iov_iter_bvec(&i, ITER_BVEC, bvec, 1, bvec->bv_len); This flag is necessary for the DAX case because we make decisions based on whether or not the iterator is a READ or a WRITE in dax_iomap_actor() and in dax_iomap_rw(). We end up going through this path in configurations where we combine a PMEM device with 4k sectors, a loopback device and DAX. The consequence of this missed flag is that what we intend as a write actually turns into a read in the DAX code, so no data is ever written. The very simplest test case is to create a loopback device and try and write a small string to it, then hexdump a few bytes of the device to see if the write took. Without this patch you read back all zeros, with this you read back the string you wrote. For XFS this causes us to fail or panic during the following xfstests: xfs/074 xfs/078 xfs/216 xfs/217 xfs/250 For ext4 we have a similar issue where writes never happen, but we don't currently have any xfstests that use loopback and show this issue. Fix this by restoring the WRITE flag argument to iov_iter_bvec(). This causes the xfstests to all pass. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Fixes: commit aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC") Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 09 March 2018, 15:36:36 UTC
bd2746f Masahiro Yamada 06 March 2018, 11:20:33 UTC clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependency The ATMEL_ST config selects MFD_SYSCON, but does not depend on HAS_IOMEM. Compile testing on architecture without HAS_IOMEM causes "unmet direct dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig". Add the proper dependency to the ATMEL_ST config. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/1520335233-11277-1-git-send-email-yamada.masahiro@socionext.com 09 March 2018, 10:11:58 UTC
6b0ef92 Boqun Feng 09 March 2018, 06:56:28 UTC rtmutex: Make rt_mutex_futex_unlock() safe for irq-off callsites When running rcutorture with TREE03 config, CONFIG_PROVE_LOCKING=y, and kernel cmdline argument "rcutorture.gp_exp=1", lockdep reports a HARDIRQ-safe->HARDIRQ-unsafe deadlock: ================================ WARNING: inconsistent lock state 4.16.0-rc4+ #1 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. takes: __schedule+0xbe/0xaf0 {IN-HARDIRQ-W} state was registered at: _raw_spin_lock+0x2a/0x40 scheduler_tick+0x47/0xf0 ... other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&rq->lock); <Interrupt> lock(&rq->lock); *** DEADLOCK *** 1 lock held by rcu_torture_rea/724: rcu_torture_read_lock+0x0/0x70 stack backtrace: CPU: 2 PID: 724 Comm: rcu_torture_rea Not tainted 4.16.0-rc4+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: lock_acquire+0x90/0x200 ? __schedule+0xbe/0xaf0 _raw_spin_lock+0x2a/0x40 ? __schedule+0xbe/0xaf0 __schedule+0xbe/0xaf0 preempt_schedule_irq+0x2f/0x60 retint_kernel+0x1b/0x2d RIP: 0010:rcu_read_unlock_special+0x0/0x680 ? rcu_torture_read_unlock+0x60/0x60 __rcu_read_unlock+0x64/0x70 rcu_torture_read_unlock+0x17/0x60 rcu_torture_reader+0x275/0x450 ? rcutorture_booster_init+0x110/0x110 ? rcu_torture_stall+0x230/0x230 ? kthread+0x10e/0x130 kthread+0x10e/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ? call_usermodehelper_exec_async+0x11a/0x150 ret_from_fork+0x3a/0x50 This happens with the following even sequence: preempt_schedule_irq(); local_irq_enable(); __schedule(): local_irq_disable(); // irq off ... rcu_note_context_switch(): rcu_note_preempt_context_switch(): rcu_read_unlock_special(): local_irq_save(flags); ... raw_spin_unlock_irqrestore(...,flags); // irq remains off rt_mutex_futex_unlock(): raw_spin_lock_irq(); ... raw_spin_unlock_irq(); // accidentally set irq on <return to __schedule()> rq_lock(): raw_spin_lock(); // acquiring rq->lock with irq on which means rq->lock becomes a HARDIRQ-unsafe lock, which can cause deadlocks in scheduler code. This problem was introduced by commit 02a7c234e540 ("rcu: Suppress lockdep false-positive ->boost_mtx complaints"). That brought the user of rt_mutex_futex_unlock() with irq off. To fix this, replace the *lock_irq() in rt_mutex_futex_unlock() with *lock_irq{save,restore}() to make it safe to call rt_mutex_futex_unlock() with irq off. Fixes: 02a7c234e540 ("rcu: Suppress lockdep false-positive ->boost_mtx complaints") Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Link: https://lkml.kernel.org/r/20180309065630.8283-1-boqun.feng@gmail.com 09 March 2018, 10:06:16 UTC
c07a8f8 Francis Deslauriers 09 March 2018, 03:18:12 UTC x86/kprobes: Fix kernel crash when probing .entry_trampoline code Disable the kprobe probing of the entry trampoline: .entry_trampoline is a code area that is used to ensure page table isolation between userspace and kernelspace. At the beginning of the execution of the trampoline, we load the kernel's CR3 register. This has the effect of enabling the translation of the kernel virtual addresses to physical addresses. Before this happens most kernel addresses can not be translated because the running process' CR3 is still used. If a kprobe is placed on the trampoline code before that change of the CR3 register happens the kernel crashes because int3 handling pages are not accessible. To fix this, add the .entry_trampoline section to the kprobe blacklist to prohibit the probing of code before all the kernel pages are accessible. Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: mathieu.desnoyers@efficios.com Cc: mhiramat@kernel.org Link: http://lkml.kernel.org/r/1520565492-4637-2-git-send-email-francis.deslauriers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 09 March 2018, 08:58:36 UTC
bd903af Song Liu 06 March 2018, 05:55:04 UTC perf/core: Fix ctx_event_type in ctx_resched() In ctx_resched(), EVENT_FLEXIBLE should be sched_out when EVENT_PINNED is added. However, ctx_resched() calculates ctx_event_type before checking this condition. As a result, pinned events will NOT get higher priority than flexible events. The following shows this issue on an Intel CPU (where ref-cycles can only use one hardware counter). 1. First start: perf stat -C 0 -e ref-cycles -I 1000 2. Then, in the second console, run: perf stat -C 0 -e ref-cycles:D -I 1000 The second perf uses pinned events, which is expected to have higher priority. However, because it failed in ctx_resched(). It is never run. This patch fixes this by calculating ctx_event_type after re-evaluating event_type. Reported-by: Ephraim Park <ephiepark@fb.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <jolsa@redhat.com> Cc: <kernel-team@fb.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 487f05e18aa4 ("perf/core: Optimize event rescheduling on active contexts") Link: http://lkml.kernel.org/r/20180306055504.3283731-1-songliubraving@fb.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 09 March 2018, 07:03:02 UTC
e576b7b Jens Axboe 09 March 2018, 02:12:59 UTC Merge branch 'nvme-4.16-rc5' of git://git.infradead.org/nvme into for-linus Pull NVMe fixes for this series from Keith: "A few late fixes for 4.16: * Reverting sysfs slave device links for native nvme multipathing. The hidden disk attributes broke common user tools. * A fix for a PPC pci error handling regression. * Update pci interrupt count to consider the actual IRQ spread, fixing potentially poor initial queue affinity. * Off-by-one errors in nvme-fc queue sizes * A fabrics discovery fix to be more tolerant with user tools." * 'nvme-4.16-rc5' of git://git.infradead.org/nvme: nvme_fc: rework sqsize handling nvme-fabrics: Ignore nr_io_queues option for discovery controllers Revert "nvme: create 'slaves' and 'holders' entries for hidden controllers" nvme: pci: pass max vectors as num_possible_cpus() to pci_alloc_irq_vectors nvme-pci: Fix EEH failure on ppc 09 March 2018, 02:12:59 UTC
b0655d6 Dave Airlie 08 March 2018, 23:23:02 UTC Merge branch 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux into drm-fixes Fixes for 4.16. A bit bigger than I would have liked, but most of that is DC fixes which Harry helped me pull together from the past few weeks. Highlights: - Fix DL DVI with DC - Various RV fixes for DC - Overlay fixes for DC - Fix HDMI2 handling on boards without HBR tables in the vbios - Fix crash with pass-through on SI on amdgpu - Fix RB harvesting on KV - Fix hibernation failures on UVD with certain cards * 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux: (35 commits) drm/amd/display: validate plane format on primary plane drm/amdgpu:Always save uvd vcpu_bo in VM Mode drm/amdgpu:Correct max uvd handles drm/amd/display: early return if not in vga mode in disable_vga drm/amd/display: Fix takover from VGA mode drm/amd/display: Fix memleaks when atomic check fails. drm/amd/display: Return success when enabling interrupt drm/amd/display: Use crtc enable/disable_vblank hooks drm/amd/display: update infoframe after dig fe is turned on drm/amd/display: fix boot-up on vega10 drm/amd/display: fix cursor related Pstate hang drm/amd/display: Set irq state only on existing crtcs drm/amd/display: Fixed non-native modes not lighting up drm/amd/display: Call update_stream_signal directly from amdgpu_dm drm/amd/display: Make create_stream_for_sink more consistent drm/amd/display: Don't block dual-link DVI modes drm/amd/display: Don't allow dual-link DVI on all ASICs. drm/amd/display: Pass signal directly to enable_tmds_output drm/amd/display: Remove unnecessary fail labels in create_stream_for_sink drm/amd/display: Move MAX_TMDS_CLOCK define to header ... 08 March 2018, 23:23:02 UTC
f5732e6 Dave Airlie 08 March 2018, 23:22:44 UTC Merge tag 'drm-misc-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes sun4i fixes on clk, division by zero and LVDS. * tag 'drm-misc-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-misc: drm/sun4i: crtc: Call drm_crtc_vblank_on / drm_crtc_vblank_off drm/sun4i: rgb: Fix potential division by zero drm/sun4i: tcon: Reduce the scope of the LVDS error a bit drm/sun4i: Release exclusive clock lock when disabling TCON drm/sun4i: Fix dclk_set_phase 08 March 2018, 23:22:44 UTC
aa87d62 Dave Airlie 08 March 2018, 23:22:19 UTC Merge tag 'drm-intel-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - 2 fixes: 1 for perf and 1 execlist submission race. * tag 'drm-intel-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Suspend submission tasklets around wedging drm/i915/perf: fix perf stream opening lock 08 March 2018, 23:22:19 UTC
e675482 Linus Torvalds 08 March 2018, 18:03:12 UTC Merge tag 'mips_fixes_4.16_4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS fixes from James Hogan: "A miscellaneous pile of MIPS fixes for 4.16: - move put_compat_sigset() to evade hardened usercopy warnings (4.16) - select ARCH_HAVE_PC_{SERIO,PARPORT} for Loongson64 platforms (4.16) - fix kzalloc() failure handling in ath25 (3.19) and Octeon (4.0) - fix disabling of IPIs during BMIPS suspend (3.19)" * tag 'mips_fixes_4.16_4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: BMIPS: Do not mask IPIs during suspend MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_SERIO MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_PARPORT signals: Move put_compat_sigset to compat.h to silence hardened usercopy MIPS: OCTEON: irq: Check for null return on kzalloc allocation MIPS: ath25: Check for kzalloc allocation failure 08 March 2018, 18:03:12 UTC
98577c6 Linus Torvalds 08 March 2018, 18:00:47 UTC Merge tag 'chrome-platform-4.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform fix from Benson Leung: "Revert a problematic patch that constified something imporperly" * tag 'chrome-platform-4.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: Revert "platform/chrome: chromeos_laptop: make chromeos_laptop const" 08 March 2018, 18:00:47 UTC
d157e53 James Smart 07 March 2018, 23:59:36 UTC nvme_fc: rework sqsize handling Corrected four outstanding issues in the transport around sqsize. 1: Create Connection LS is sending the 1's-based sqsize, should be sending the 0's-based value. 2: allocation of hw queue is using the 0's-base size. It should be using the 1's-based value. 3: normalization of ctrl.sqsize by MQES is using MQES+1 (1's-based value). It should be MQES (0's-based value). 4: Missing clause to ensure queue_count not larger than ctrl->sqsize. Corrected by: Clean up routines that pass queue size around. The queue size value is the actual count (1's-based) value and determined from ctrl->sqsize + 1. Routines that send 0's-based value adapt from queue size. Sset ctrl->sqsize properly for MQES. Added clause to nsure queue_count not larger than ctrl->sqsize + 1. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <keith.busch@intel.com> 08 March 2018, 17:39:58 UTC
099fd6c Dennis Wassenberg 08 March 2018, 14:49:24 UTC ALSA: hda: add dock and led support for HP ProBook 640 G2 This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP ProBook 640 G2 Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 08 March 2018, 16:37:10 UTC
aea8081 Dennis Wassenberg 08 March 2018, 14:49:03 UTC ALSA: hda: add dock and led support for HP EliteBook 820 G3 This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP EliteBook 820 G3 Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 08 March 2018, 16:36:51 UTC
9296080 Jens Axboe 08 March 2018, 16:24:52 UTC Merge branch 'stable/for-jens-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus Pull a xen_blkfront fix from Konrad: "It has one simple fix for the multi-queue support not showing up after a block device was detached/re-attached." * 'stable/for-jens-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen-blkfront: move negotiate_mq to cover all cases of new VBDs 08 March 2018, 16:24:52 UTC
0475821 Roland Dreier 05 March 2018, 19:59:53 UTC nvme-fabrics: Ignore nr_io_queues option for discovery controllers This removes a dependency on the order options are passed when creating a fabrics controller. With the old code, if "nr_io_queues" appears before an "nqn" option specifying the discovery controller, then nr_io_queues is overridden with zero. If "nr_io_queues" appears after specifying the discovery controller, then the nr_io_queues option is used to set the number of queues, and the driver attempts to establish IO connections to the discovery controller (which doesn't work). It seems better to ignore (and warn about) the "nr_io_queues" option if userspace has already asked to connect to the discovery controller. Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <keith.busch@intel.com> 08 March 2018, 16:19:17 UTC
55fe6da James Hogan 08 March 2018, 11:02:46 UTC kbuild: Handle builtin dtb file names containing hyphens cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree FDT (that is, the .dtb file) as binary data in the kernel image. This assembly source contains labels before and after the binary data. The label names incorporate the file name of the corresponding .dtb file. Hyphens are not legal characters in labels, so .dtb files built into the kernel with hyphens in the file name result in errors like the following: bcm3368-netgear-cvg834g.dtb.S: Assembler messages: bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-' bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:' bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:' bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-' Fix this by updating cmd_dt_S_dtb to transform all hyphens from the file name to underscores when constructing the labels. As of v4.16-rc2, 1139 .dts files across ARM64, ARM, MIPS and PowerPC contain hyphens in their names, but the issue only currently manifests on Broadcom MIPS platforms, as that is the only place where such files are built into the kernel. For example when CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is used (in the latter case it admittedly shouldn't really build all the dtb.o files, but thats a separate issue). Fixes: 695835511f96 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom") Signed-off-by: James Hogan <jhogan@kernel.org> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: <stable@vger.kernel.org> # 4.9+ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 08 March 2018, 16:14:38 UTC
61fc470 Matteo Croce 14 February 2018, 17:47:18 UTC scripts/bloat-o-meter: fix typos in help The bloat-o-meter script has two typos in the help, fix both. Fixes: 192efb7a1f9b ("bloat-o-meter: provide 3 different arguments for data, function and All") Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 08 March 2018, 16:12:31 UTC
b3b7c47 Seunghun Han 06 March 2018, 14:21:43 UTC x86/MCE: Serialize sysfs changes The check_interval file in /sys/devices/system/machinecheck/machinecheck<cpu number> directory is a global timer value for MCE polling. If it is changed by one CPU, mce_restart() broadcasts the event to other CPUs to delete and restart the MCE polling timer and __mcheck_cpu_init_timer() reinitializes the mce_timer variable. If more than one CPU writes a specific value to the check_interval file concurrently, mce_timer is not protected from such concurrent accesses and all kinds of explosions happen. Since only root can write to those sysfs variables, the issue is not a big deal security-wise. However, concurrent writes to these configuration variables is void of reason so the proper thing to do is to serialize the access with a mutex. Boris: - Make store_int_with_restart() use device_store_ulong() to filter out negative intervals - Limit min interval to 1 second - Correct locking - Massage commit message Signed-off-by: Seunghun Han <kkamagui@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180302202706.9434-1-kkamagui@gmail.com 08 March 2018, 14:36:27 UTC
fa94d0c Tony Luck 06 March 2018, 14:21:41 UTC x86/MCE: Save microcode revision in machine check records Updating microcode used to be relatively rare. Now that it has become more common we should save the microcode version in a machine check record to make sure that those people looking at the error have this important information bundled with the rest of the logged information. [ Borislav: Simplify a bit. ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yazen Ghannam <yazen.ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180301233449.24311-1-tony.luck@intel.com 08 March 2018, 14:34:49 UTC
351b2bc Arvind Yadav 06 March 2018, 10:10:37 UTC xen: xenbus: use put_device() instead of kfree() Never directly free @dev after calling device_register(), even if it returned an error! Always use put_device() to give up the reference initialized. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> 08 March 2018, 14:30:30 UTC
e4c07b3 Dennis Wassenberg 08 March 2018, 12:17:54 UTC ALSA: hda/realtek - Make dock sound work on ThinkPad L570 One version of Lenovo Thinkpad T570 did not use ALC298 (like other Kaby Lake devices). Instead it uses ALC292. In order to make the Lenovo dock working with that codec the dock quirk for ALC292 will be used. Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 08 March 2018, 13:22:34 UTC
c5b679f Seunghun Han 07 March 2018, 04:32:15 UTC x86/pti: Fix a comment typo s/visinble/visible/ Signed-off-by: Seunghun Han <kkamagui@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1520397135-132809-1-git-send-email-kkamagui@gmail.com 08 March 2018, 11:33:21 UTC
85d59b5 Takashi Iwai 08 March 2018, 11:01:25 UTC ALSA: seq: Remove superfluous snd_seq_queue_client_leave_cells() call With the previous two fixes for the write / ioctl races: ALSA: seq: Don't allow resizing pool in use ALSA: seq: More protection for concurrent write and ioctl races the cells aren't any longer in queues at the point calling snd_seq_pool_done() in snd_seq_ioctl_set_client_pool(). Hence the function call snd_seq_queue_client_leave_cells() can be dropped safely from there. Suggested-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> 08 March 2018, 11:06:07 UTC
7bd8009 Takashi Iwai 05 March 2018, 21:06:09 UTC ALSA: seq: More protection for concurrent write and ioctl races This patch is an attempt for further hardening against races between the concurrent write and ioctls. The previous fix d15d662e89fc ("ALSA: seq: Fix racy pool initializations") covered the race of the pool initialization at writer and the pool resize ioctl by the client->ioctl_mutex (CVE-2018-1000004). However, basically this mutex should be applied more widely to the whole write operation for avoiding the unexpected pool operations by another thread. The only change outside snd_seq_write() is the additional mutex argument to helper functions, so that we can unlock / relock the given mutex temporarily during schedule() call for blocking write. Fixes: d15d662e89fc ("ALSA: seq: Fix racy pool initializations") Reported-by: 范龙飞 <long7573@126.com> Reported-by: Nicolai Stange <nstange@suse.de> Reviewed-and-tested-by: Nicolai Stange <nstange@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 08 March 2018, 11:05:37 UTC
a5321ae Ashok Raj 28 February 2018, 10:28:46 UTC x86/microcode: Synchronize late microcode loading Original idea by Ashok, completely rewritten by Borislav. Before you read any further: the early loading method is still the preferred one and you should always do that. The following patch is improving the late loading mechanism for long running jobs and cloud use cases. Gather all cores and serialize the microcode update on them by doing it one-by-one to make the late update process as reliable as possible and avoid potential issues caused by the microcode update. [ Borislav: Rewrite completely. ] Co-developed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-8-bp@alien8.de 08 March 2018, 09:19:26 UTC
cfb52a5 Borislav Petkov 28 February 2018, 10:28:45 UTC x86/microcode: Request microcode on the BSP ... so that any newer version can land in the cache and can later be fished out by the application functions. Do that before grabbing the hotplug lock. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-7-bp@alien8.de 08 March 2018, 09:19:26 UTC
d8c3b52 Borislav Petkov 28 February 2018, 10:28:44 UTC x86/microcode/intel: Look into the patch cache first The cache might contain a newer patch - look in there first. A follow-on change will make sure newest patches are loaded into the cache of microcode patches. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-6-bp@alien8.de 08 March 2018, 09:19:26 UTC
30ec26d Ashok Raj 28 February 2018, 10:28:43 UTC x86/microcode: Do not upload microcode if CPUs are offline Avoid loading microcode if any of the CPUs are offline, and issue a warning. Having different microcode revisions on the system at any time is outright dangerous. [ Borislav: Massage changelog. ] Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: http://lkml.kernel.org/r/1519352533-15992-4-git-send-email-ashok.raj@intel.com Link: https://lkml.kernel.org/r/20180228102846.13447-5-bp@alien8.de 08 March 2018, 09:19:26 UTC
91df9fd Ashok Raj 28 February 2018, 10:28:42 UTC x86/microcode/intel: Writeback and invalidate caches before updating microcode Updating microcode is less error prone when caches have been flushed and depending on what exactly the microcode is updating. For example, some of the issues around certain Broadwell parts can be addressed by doing a full cache flush. [ Borislav: Massage it and use native_wbinvd() in both cases. ] Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: http://lkml.kernel.org/r/1519352533-15992-3-git-send-email-ashok.raj@intel.com Link: https://lkml.kernel.org/r/20180228102846.13447-4-bp@alien8.de 08 March 2018, 09:19:25 UTC
c182d2b Ashok Raj 28 February 2018, 10:28:41 UTC x86/microcode/intel: Check microcode revision before updating sibling threads After updating microcode on one of the threads of a core, the other thread sibling automatically gets the update since the microcode resources on a hyperthreaded core are shared between the two threads. Check the microcode revision on the CPU before performing a microcode update and thus save us the WRMSR 0x79 because it is a particularly expensive operation. [ Borislav: Massage changelog and coding style. ] Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: http://lkml.kernel.org/r/1519352533-15992-2-git-send-email-ashok.raj@intel.com Link: https://lkml.kernel.org/r/20180228102846.13447-3-bp@alien8.de 08 March 2018, 09:19:25 UTC
854857f Borislav Petkov 28 February 2018, 10:28:40 UTC x86/microcode: Get rid of struct apply_microcode_ctx It is a useless remnant from earlier times. Use the ucode_state enum directly. No functional change. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Ashok Raj <ashok.raj@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Link: https://lkml.kernel.org/r/20180228102846.13447-2-bp@alien8.de 08 March 2018, 09:19:25 UTC
3626822 Konrad Rzeszutek Wilk 26 February 2018, 14:35:01 UTC x86/spectre_v2: Don't check microcode versions when running under hypervisors As: 1) It's known that hypervisors lie about the environment anyhow (host mismatch) 2) Even if the hypervisor (Xen, KVM, VMWare, etc) provided a valid "correct" value, it all gets to be very murky when migration happens (do you provide the "new" microcode of the machine?). And in reality the cloud vendors are the ones that should make sure that the microcode that is running is correct and we should just sing lalalala and trust them. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: kvm <kvm@vger.kernel.org> Cc: Krčmář <rkrcmar@redhat.com> Cc: Borislav Petkov <bp@alien8.de> CC: "H. Peter Anvin" <hpa@zytor.com> CC: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180226213019.GE9497@char.us.oracle.com 08 March 2018, 09:13:02 UTC
d857393 Takashi Iwai 05 March 2018, 21:00:55 UTC ALSA: seq: Don't allow resizing pool in use This is a fix for a (sort of) fallout in the recent commit d15d662e89fc ("ALSA: seq: Fix racy pool initializations") for CVE-2018-1000004. As the pool resize deletes the existing cells, it may lead to a race when another thread is writing concurrently, eventually resulting a UAF. A simple workaround is not to allow the pool resizing when the pool is in use. It's an invalid behavior in anyway. Fixes: d15d662e89fc ("ALSA: seq: Fix racy pool initializations") Reported-by: 范龙飞 <long7573@126.com> Reported-by: Nicolai Stange <nstange@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 08 March 2018, 07:59:26 UTC
076ca27 Andy Lutomirski 07 March 2018, 19:12:27 UTC x86/vsyscall/64: Drop "native" vsyscalls Since Linux v3.2, vsyscalls have been deprecated and slow. From v3.2 on, Linux had three vsyscall modes: "native", "emulate", and "none". "emulate" is the default. All known user programs work correctly in emulate mode, but vsyscalls turn into page faults and are emulated. This is very slow. In "native" mode, the vsyscall page is easily usable as an exploit gadget, but vsyscalls are a bit faster -- they turn into normal syscalls. (This is in contrast to vDSO functions, which can be much faster than syscalls.) In "none" mode, there are no vsyscalls. For all practical purposes, "native" was really just a chicken bit in case something went wrong with the emulation. It's been over six years, and nothing has gone wrong. Delete it. Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Kernel Hardening <kernel-hardening@lists.openwall.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/519fee5268faea09ae550776ce969fa6e88668b0.1520449896.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 08 March 2018, 05:48:15 UTC
fc88bbd Dmitry Torokhov 06 March 2018, 18:59:15 UTC Revert "platform/chrome: chromeos_laptop: make chromeos_laptop const" This reverts commit a376cd91606365609d8fbd57247618bd51da1fc6 because chromeos_laptop instances should not be marked as "const" (at this time), since i2c_peripheral is being modified (we change "state" and "tries") when we instantiate devices. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Benson Leung <bleung@chromium.org> 08 March 2018, 05:18:04 UTC
1b88acc Linus Torvalds 08 March 2018, 01:49:33 UTC Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio bugfix from Michael Tsirkin: "A bugfix for error handling in virtio" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_ring: fix num_free handling in error case 08 March 2018, 01:49:33 UTC
851710a Linus Torvalds 08 March 2018, 01:37:32 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - we are reverting patch that was switched touchpad on Lenovo T460P over to native RMI because on these boxes BIOS messes up with SMBus controller state. We might re-enable it later once SMBus issue is resolved - disabling interrupts in matrix_keypad driver was racy - mms114 now has SPDX header and matching MODULE_LICENSE * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - Lenovo Thinkpad T460p devices should use RMI" Input: matrix_keypad - fix race when disabling interrupts Input: mms114 - add SPDX identifier Input: mms114 - fix license module information 08 March 2018, 01:37:32 UTC
5444a99 Arkadiusz Hiler 07 March 2018, 23:40:28 UTC Revert "Input: synaptics - Lenovo Thinkpad T460p devices should use RMI" This reverts commit 48282969826b3d3c76e908182f69724d86d995fe which caused the following issues: 1. On T460p with BIOS version 2.22 touchpad and trackpoint stop working after suspend-resume cycle. Due to strange state of the device another suspend is impossible. The following dmesg errors can be observed: thinkpad_acpi: EC reports that Thermal Table has changed rmi4_smbus 7-002c: failed to get SMBus version number! rmi4_physical rmi4-00: rmi_driver_reset_handler: Failed to read current IRQ mask. rmi4_f01 rmi4-00.fn01: Failed to restore normal operation: -16. rmi4_f01 rmi4-00.fn01: Resume failed with code -16. rmi4_physical rmi4-00: Failed to suspend functions: -16 rmi4_smbus 7-002c: Failed to resume device: -16 PM: resume devices took 0.640 seconds rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-16). rmi4_physical rmi4-00: rmi_driver_clear_irq_bits: Failed to change enabled interrupts! rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts! psmouse: probe of serio3 failed with error -1 2. On another T460p with BIOS version 2.15 two finger scrolling gesture on the touchpad stops working after suspend-resume cycle (about 75% reproducibility, when it still works, the scrolling gesture becomes laggy). Nothing suspicious appears in the dmesg. Analysis form Richard Schütz: "RMI is unreliable on the ThinkPad T460p because the device is affected by the firmware behavior addressed in a7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR")." The affected devices often show: i801_smbus 0000:00:1f.4: BIOS is accessing SMBus registers i801_smbus 0000:00:1f.4: Driver SMBus register access inhibited Reported-by: Richard Schütz <rschuetz@uni-koblenz.de> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Tested-by: Martin Peres <martin.peres@linux.intel.com> Tested-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 07 March 2018, 23:50:29 UTC
4a53d90 Shirish S 07 March 2018, 07:06:11 UTC drm/amd/display: validate plane format on primary plane In dce110, the plane configuration is such that plane 0 or the primary plane should be rendered with only RGB data. This patch adds the validation to ensure that no video data is rendered on plane 0. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 March 2018, 21:31:19 UTC
f8bee61 James Zhu 06 March 2018, 19:52:35 UTC drm/amdgpu:Always save uvd vcpu_bo in VM Mode When UVD is in VM mode, there is not uvd handle exchanged, uvd.handles are always 0. So vcpu_bo always need save, Otherwise amdgpu driver will fail during suspend/resume. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105021 Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 07 March 2018, 21:30:44 UTC
0e5ee33 James Zhu 06 March 2018, 19:43:50 UTC drm/amdgpu:Correct max uvd handles Max uvd handles should use adev->uvd.max_handles instead of AMDGPU_MAX_UVD_HANDLES here. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 07 March 2018, 21:30:29 UTC
abca240 Eric Yang 28 February 2018, 19:45:36 UTC drm/amd/display: early return if not in vga mode in disable_vga The work around for hw bug causes S3 resume failure. Don't execute disable vga logic if not in vga mode. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 March 2018, 21:28:39 UTC
bd9bc35 Bhawanpreet Lakha 27 February 2018, 17:12:46 UTC drm/amd/display: Fix takover from VGA mode HW Engineer's Notes: During switch from vga->extended, if we set the VGA_TEST_ENABLE and then hit the VGA_TEST_RENDER_START, then the DCHUBP timing gets updated correctly. Then vBIOS will have it poll for the VGA_TEST_RENDER_DONE and unset VGA_TEST_ENABLE, to leave it in the same state as before. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 March 2018, 21:28:32 UTC
9fe8f03 Leo (Sunpeng) Li 20 February 2018, 20:46:09 UTC drm/amd/display: Fix memleaks when atomic check fails. While checking plane states for updates during atomic check, we create dc_plane_states in preparation. These dc states should be freed if something errors. Although the input transfer function is also freed by dc_plane_state_release(), we should free it (on error) under the same scope as where it is created. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 March 2018, 21:28:22 UTC
c0e463d Harry Wentland 13 February 2018, 16:03:01 UTC drm/amd/display: Return success when enabling interrupt Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 March 2018, 21:28:15 UTC
c0ec564 Harry Wentland 13 February 2018, 15:54:26 UTC drm/amd/display: Use crtc enable/disable_vblank hooks Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 March 2018, 21:28:06 UTC
db941f2 Eric Yang 21 February 2018, 21:37:16 UTC drm/amd/display: update infoframe after dig fe is turned on Before dig fe is enabled, infoframe can't be programmed. So in suspend resume case our infoframe programmming was not going through. This change changes the sequence so that infoframe is programmed after. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 March 2018, 21:27:57 UTC
8378fc7 Roman Li 23 January 2018, 16:12:27 UTC drm/amd/display: fix boot-up on vega10 Fixing null-deref on Vega10 due to regression after 'fix cursor related Pstate hang' change. Added null checks in setting cursor position. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 March 2018, 21:27:54 UTC
39b485e Eric Yang 19 January 2018, 00:07:54 UTC drm/amd/display: fix cursor related Pstate hang Move cursor programming to inside the OTG_MASTER_UPDATE_LOCK If graphics plane go from 1 pipe to hsplit, the cursor updates after mpc programming and unlock. Which means there is a window of time where cursor is enabled on the wrong pipe if it's on the right side of the screen (i.e. case where cursor need to move from pipe 0 to pipe 3 post split). This will cause pstate hang. Solution is to program the cursor while still locked. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 March 2018, 21:27:48 UTC
43b9d27 Mikita Lipski 18 January 2018, 19:53:57 UTC drm/amd/display: Set irq state only on existing crtcs Because AMDGPU_CRTC_IRQ_VLINE1 = 6, it expected 6 more crtcs to be programed with disabled irq state in amdgpu_irq_disable_all. That caused errors and accessed the wrong memory location. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 March 2018, 21:27:43 UTC
4a2df0d Jerry (Fangzhi) Zuo 17 January 2018, 18:24:28 UTC drm/amd/display: Fixed non-native modes not lighting up There is no need to call drm_mode_set_crtcinfo() again once crtc timing is decided. Otherwise non-native/unsupported timing might get overwritten. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 March 2018, 21:27:36 UTC
3549130 Harry Wentland 18 December 2017, 17:01:30 UTC drm/amd/display: Call update_stream_signal directly from amdgpu_dm There's no good place in DC to cover all place where stream signal should be updated. update_stream_signal depends on timing which comes from DM. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 March 2018, 21:27:34 UTC
52f401f Harry Wentland 18 December 2017, 18:48:12 UTC drm/amd/display: Make create_stream_for_sink more consistent We've got a helper function to call dc_create_stream_for_sink and one other place that calls it directly. Make sure we call the helper functions always since we need to update a bunch of things in stream and don't want to miss that. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 March 2018, 21:27:30 UTC
db19548 Harry Wentland 18 December 2017, 19:36:01 UTC drm/amd/display: Don't block dual-link DVI modes Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 March 2018, 21:27:27 UTC
6724eeb Harry Wentland 19 December 2017, 21:17:22 UTC drm/amd/display: Don't allow dual-link DVI on all ASICs. Our APUs (Carrizo, Stoney, Raven) don't support it. v2: Don't use is_apu as other ASICs might also not support it Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 March 2018, 21:27:24 UTC
back to top