https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
a7904a5 Linux 5.16-rc6 19 December 2021, 22:14:33 UTC
f291e2d Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "Two small fixes, one of which was being worked around in selftests" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Retry page fault if MMU reload is pending and root has no sp KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDs KVM: x86: Drop guest CPUID check for host initiated writes to MSR_IA32_PERF_CAPABILITIES 19 December 2021, 20:44:03 UTC
2da09da Merge tag 'block-5.16-2021-12-19' of git://git.kernel.dk/linux-block Pull block revert from Jens Axboe: "It turns out that the fix for not hammering on the delayed work timer too much caused a performance regression for BFQ, so let's revert the change for now. I've got some ideas on how to fix it appropriately, but they should wait for 5.17" * tag 'block-5.16-2021-12-19' of git://git.kernel.dk/linux-block: Revert "block: reduce kblockd_mod_delayed_work_on() CPU consumption" 19 December 2021, 20:38:53 UTC
a76c3d0 Merge tag 'irq_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Clear the PCI_MSIX_FLAGS_MASKALL bit too on the error path so that it is restored to its reset state - Mask MSI-X vectors late on the init path in order to handle out-of-spec Marvell NVME devices which apparently look at the MSI-X mask even when MSI-X is disabled * tag 'irq_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on error PCI/MSI: Mask MSI-X vectors only on success 19 December 2021, 20:28:46 UTC
e1fe1b1 Merge tag 'timers_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Borislav Petkov: - Make sure the CLOCK_REALTIME to CLOCK_MONOTONIC offset is never positive * tag 'timers_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Really make sure wall_to_monotonic isn't positive 19 December 2021, 20:23:18 UTC
909e1d1 Merge tag 'locking_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Borislav Petkov: - Fix the rtmutex condition checking when the optimistic spinning of a waiter needs to be terminated * tag 'locking_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rtmutex: Fix incorrect condition in rtmutex_spin_on_owner() 19 December 2021, 20:17:26 UTC
c36d891 Merge tag 'core_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull signal handlign fix from Borislav Petkov: - Prevent lock contention on the new sigaltstack lock on the common-case path, when no changes have been made to the alternative signal stack. * tag 'core_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: signal: Skip the altstack update when not needed 19 December 2021, 19:46:54 UTC
a4cc5ea Merge tag 'mips-fixes_5.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fix from Thomas Bogendoerfer: - only enable pci_remap_iospace() for Ralink devices * tag 'mips-fixes_5.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Only define pci_remap_iospace() for Ralink 19 December 2021, 19:40:11 UTC
713ab91 Merge tag 'powerpc-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Fix a recently introduced oops at boot on 85xx in some configurations. Fix crashes when loading some livepatch modules with STRICT_MODULE_RWX. Thanks to Joe Lawrence, Russell Currey, and Xiaoming Ni" * tag 'powerpc-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/module_64: Fix livepatching for RO modules powerpc/85xx: Fix oops when CONFIG_FSL_PMC=n 19 December 2021, 19:31:14 UTC
9273d6c Merge tag '5.16-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "Two cifs/smb3 fixes, one fscache related, and one mount parsing related for stable" * tag '5.16-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: sanitize multiple delimiters in prepath cifs: ignore resource_id while getting fscache super cookie 19 December 2021, 19:23:02 UTC
18c841e KVM: x86: Retry page fault if MMU reload is pending and root has no sp Play nice with a NULL shadow page when checking for an obsolete root in the page fault handler by flagging the page fault as stale if there's no shadow page associated with the root and KVM_REQ_MMU_RELOAD is pending. Invalidating memslots, which is the only case where _all_ roots need to be reloaded, requests all vCPUs to reload their MMUs while holding mmu_lock for lock. The "special" roots, e.g. pae_root when KVM uses PAE paging, are not backed by a shadow page. Running with TDP disabled or with nested NPT explodes spectaculary due to dereferencing a NULL shadow page pointer. Skip the KVM_REQ_MMU_RELOAD check if there is a valid shadow page for the root. Zapping shadow pages in response to guest activity, e.g. when the guest frees a PGD, can trigger KVM_REQ_MMU_RELOAD even if the current vCPU isn't using the affected root. I.e. KVM_REQ_MMU_RELOAD can be seen with a completely valid root shadow page. This is a bit of a moot point as KVM currently unloads all roots on KVM_REQ_MMU_RELOAD, but that will be cleaned up in the future. Fixes: a955cad84cda ("KVM: x86/mmu: Retry page fault if root is invalidated by memslot update") Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211209060552.2956723-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 19 December 2021, 18:38:58 UTC
0b091a4 KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDs Host initiated writes to MSR_IA32_PERF_CAPABILITIES should not depend on guest visible CPUIDs and (incorrect) KVM logic implementing it is about to change. Also, KVM_SET_CPUID{,2} after KVM_RUN is now forbidden and causes test to fail. Reported-by: kernel test robot <oliver.sang@intel.com> Fixes: feb627e8d6f6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20211216165213.338923-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 19 December 2021, 18:35:29 UTC
1aa2abb KVM: x86: Drop guest CPUID check for host initiated writes to MSR_IA32_PERF_CAPABILITIES The ability to write to MSR_IA32_PERF_CAPABILITIES from the host should not depend on guest visible CPUID entries, even if just to allow creating/restoring guest MSRs and CPUIDs in any sequence. Fixes: 27461da31089 ("KVM: x86/pmu: Support full width counting") Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20211216165213.338923-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 19 December 2021, 18:35:18 UTC
87959fa Revert "block: reduce kblockd_mod_delayed_work_on() CPU consumption" This reverts commit cb2ac2912a9ca7d3d26291c511939a41361d2d83. Alex and the kernel test robot report that this causes a significant performance regression with BFQ. I can reproduce that result, so let's revert this one as we're close to -rc6 and we there's no point in trying to rush a fix. Link: https://lore.kernel.org/linux-block/1639853092.524jxfaem2.none@localhost/ Link: https://lore.kernel.org/lkml/20211219141852.GH14057@xsang-OptiPlex-9020/ Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 19 December 2021, 14:58:44 UTC
3f667b5 Merge tag 'tty-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are two small tty/serial fixes for 5.16-rc6. They include: - n_hdlc fix for syzbot reported problem that you were previously copied on. - 8250_fintek driver fix that resolved a console problem by removing a previous change. Both have been in linux-next with no reported issues" * tag 'tty-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_fintek: Fix garbled text for console tty: n_hdlc: make n_hdlc_tty_wakeup() asynchronous 18 December 2021, 21:23:55 UTC
fb7d082 Merge tag 'usb-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for reported problems. They include: - dwc2 driver fixes - xhci driver fixes - cdnsp driver fixes - typec driver fix - gadget u_ether driver fix - new quirk additions - usb gadget endpoint calculation fix - usb serial new device ids - revert of a xhci-dbg change that broke early debug booting All changes, except for the revert, have been in linux-next with no reported problems. The revert was from yesterday, and it was reported by the developers affected that it resolved their problem" * tag 'usb-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "usb: early: convert to readl_poll_timeout_atomic()" usb: typec: tcpm: fix tcpm unregister port but leave a pending timer usb: cdnsp: Fix lack of spin_lock_irqsave/spin_lock_restore USB: NO_LPM quirk Lenovo USB-C to Ethernet Adapher(RTL8153-04) usb: xhci: Extend support for runtime power management for AMD's Yellow carp. usb: dwc2: fix STM ID/VBUS detection startup delay in dwc2_driver_probe USB: gadget: bRequestType is a bitfield, not a enum USB: serial: option: add Telit FN990 compositions USB: serial: cp210x: fix CP2105 GPIO registration usb: cdnsp: Fix incorrect status for control request usb: cdnsp: Fix issue in cdnsp_log_ep trace event usb: cdnsp: Fix incorrect calling of cdnsp_died function usb: xhci-mtk: fix list_del warning when enable list debug usb: gadget: u_ether: fix race in setting MAC address in setup phase 18 December 2021, 21:16:43 UTC
0f03adc Merge tag 'perf-tools-fixes-for-v5.16-2021-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix segfaults in 'perf inject' related to usage of unopened files - The return value of hashmap__new() should be checked using IS_ERR() * tag 'perf-tools-fixes-for-v5.16-2021-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf inject: Fix segfault due to perf_data__fd() without open perf inject: Fix segfault due to close without open perf expr: Fix missing check for return value of hashmap__new() 18 December 2021, 19:53:14 UTC
c271a55 perf inject: Fix segfault due to perf_data__fd() without open The fixed commit attempts to get the output file descriptor even if the file was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. __GI___fileno (fp=0x0) at fileno.c:35 35 fileno.c: No such file or directory. (gdb) bt #0 __GI___fileno (fp=0x0) at fileno.c:35 #1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72 #2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69 #3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017 #4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313 #5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539 (gdb) Fixes: 0ae03893623dd1dd ("perf tools: Pass a fd to perf_file_header__read_pipe()") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211213084829.114772-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 18 December 2021, 11:31:14 UTC
0c8e32f perf inject: Fix segfault due to close without open The fixed commit attempts to close inject.output even if it was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 48 iofclose.c: No such file or directory. (gdb) bt #0 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 #1 0x0000557fc7b74f92 in perf_data__close (data=data@entry=0x7ffcdafa6578) at util/data.c:376 #2 0x0000557fc7a6b807 in cmd_inject (argc=<optimized out>, argv=<optimized out>) at builtin-inject.c:1085 #3 0x0000557fc7ac4783 in run_builtin (p=0x557fc8074878 <commands+600>, argc=4, argv=0x7ffcdafb6a60) at perf.c:313 #4 0x0000557fc7a25d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #5 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #6 main (argc=4, argv=0x7ffcdafb6a60) at perf.c:539 (gdb) Fixes: 02e6246f5364d526 ("perf inject: Close inject.output on exit") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211213084829.114772-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 18 December 2021, 11:31:14 UTC
0a515a0 perf expr: Fix missing check for return value of hashmap__new() The hashmap__new() function may return ERR_PTR(-ENOMEM) when malloc() fails, add IS_ERR() checking for ctx->ids. Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20211212062504.25841-1-linmq006@gmail.com [ s/kfree()/free()/ and add missing linux/err.h include ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 18 December 2021, 11:31:14 UTC
8f556a3 locking/rtmutex: Fix incorrect condition in rtmutex_spin_on_owner() Optimistic spinning needs to be terminated when the spinning waiter is not longer the top waiter on the lock, but the condition is negated. It terminates if the waiter is the top waiter, which is defeating the whole purpose. Fixes: c3123c431447 ("locking/rtmutex: Dont dereference waiter lockless") Signed-off-by: Zqiang <qiang1.zhang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211217074207.77425-1-qiang1.zhang@intel.com 18 December 2021, 09:55:51 UTC
9eaa88c Merge tag 'libata-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull libata fix from Damien Le Moal: "A single fix for this cycle: - Check that ATA16 passthrough commands that do not transfer any data have a DMA direction set to DMA_NONE (From George)" * tag 'libata-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: libata: if T_LENGTH is zero, dma direction should be DMA_NONE 18 December 2021, 01:24:53 UTC
1887bf5 Merge tag 'zonefs-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs Pull zonefs fixes from Damien Le Moal: "One fix and one trivial update for rc6: - Add MODULE_ALIAS_FS to get automatic module loading on mount (Naohiro) - Update Damien's email address in the MAINTAINERS file (me)" * tag 'zonefs-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: MAITAINERS: Change zonefs maintainer email address zonefs: add MODULE_ALIAS_FS 18 December 2021, 01:19:51 UTC
a310808 cifs: sanitize multiple delimiters in prepath mount.cifs can pass a device with multiple delimiters in it. This will cause rename(2) to fail with ENOENT. V2: - Make sanitize_path more readable. - Fix multiple delimiters between UNC and prepath. - Avoid a memory leak if a bad user starts putting a lot of delimiters in the path on purpose. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2031200 Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Cc: stable@vger.kernel.org # 5.11+ Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Thiago Rafael Becker <trbecker@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com> 18 December 2021, 01:16:49 UTC
b774302 cifs: ignore resource_id while getting fscache super cookie We have a cyclic dependency between fscache super cookie and root inode cookie. The super cookie relies on tcon->resource_id, which gets populated from the root inode number. However, fetching the root inode initializes inode cookie as a child of super cookie, which is yet to be populated. resource_id is only used as auxdata to check the validity of super cookie. We can completely avoid setting resource_id to remove the circular dependency. Since vol creation time and vol serial numbers are used for auxdata, we should be fine. Additionally, there will be auxiliary data check for each inode cookie as well. Fixes: 5bf91ef03d98 ("cifs: wait for tcon resource_id before getting fscache super") CC: David Howells <dhowells@redhat.com> Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> 18 December 2021, 01:09:06 UTC
4e8c11b timekeeping: Really make sure wall_to_monotonic isn't positive Even after commit e1d7ba873555 ("time: Always make sure wall_to_monotonic isn't positive") it is still possible to make wall_to_monotonic positive by running the following code: int main(void) { struct timespec time; clock_gettime(CLOCK_MONOTONIC, &time); time.tv_nsec = 0; clock_settime(CLOCK_REALTIME, &time); return 0; } The reason is that the second parameter of timespec64_compare(), ts_delta, may be unnormalized because the delta is calculated with an open coded substraction which causes the comparison of tv_sec to yield the wrong result: wall_to_monotonic = { .tv_sec = -10, .tv_nsec = 900000000 } ts_delta = { .tv_sec = -9, .tv_nsec = -900000000 } That makes timespec64_compare() claim that wall_to_monotonic < ts_delta, but actually the result should be wall_to_monotonic > ts_delta. After normalization, the result of timespec64_compare() is correct because the tv_sec comparison is not longer misleading: wall_to_monotonic = { .tv_sec = -10, .tv_nsec = 900000000 } ts_delta = { .tv_sec = -10, .tv_nsec = 100000000 } Use timespec64_sub() to ensure that ts_delta is normalized, which fixes the issue. Fixes: e1d7ba873555 ("time: Always make sure wall_to_monotonic isn't positive") Signed-off-by: Yu Liao <liaoyu15@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211213135727.1656662-1-liaoyu15@huawei.com 17 December 2021, 22:06:22 UTC
5d65f6f Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One driver fix: the pm8001 has never actually worked on a system with an IOMMU and this fixes that use case" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t 17 December 2021, 21:55:03 UTC
9609134 Merge tag 'for-5.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more fixes, almost all error handling one-liners and for stable. - regression fix in directory logging items - regression fix of extent buffer status bits handling after an error - fix memory leak in error handling path in tree-log - fix freeing invalid anon device number when handling errors during subvolume creation - fix warning when freeing leaf after subvolume creation failure - fix missing blkdev put in device scan error handling - fix invalid delayed ref after subvolume creation failure" * tag 'for-5.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix missing blkdev_put() call in btrfs_scan_one_device() btrfs: fix warning when freeing leaf after subvolume creation failure btrfs: fix invalid delayed ref after subvolume creation failure btrfs: check WRITE_ERR when trying to read an extent buffer btrfs: fix missing last dir item offset update when logging directory btrfs: fix double free of anon_dev after failure to create subvolume btrfs: fix memory leak in __add_inode_ref() 17 December 2021, 21:50:58 UTC
f1f05ef Merge tag 'selinux-pr-20211217' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux fix from Paul Moore: "Another small SELinux fix for v5.16 to ensure that we don't block on memory allocations while holding a spinlock. This passes all our tests without problem" * tag 'selinux-pr-20211217' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix sleeping function called from invalid context 17 December 2021, 20:03:14 UTC
0bb43ae Merge tag 'riscv-for-linus-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A handful of DT updates for the SiFive HiFive Unmatched, that fix the regulator handling. These should stop some warning spew. - A pair of fixes for both the SiFive Hifive Unleashed and Unmatched, that correctly hook up the MMC card detect signal. * tag 'riscv-for-linus-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: dts: sifive unmatched: Link the tmp451 with its power supply riscv: dts: sifive unmatched: Fix regulator for board rev3 riscv: dts: sifive unmatched: Expose the PMIC sub-functions riscv: dts: sifive unmatched: Expose the board ID eeprom riscv: dts: sifive unmatched: Name gpio lines riscv: dts: unmatched: Add gpio card detect to mmc-spi-slot riscv: dts: unleashed: Add gpio card detect to mmc-spi-slot 17 December 2021, 19:55:35 UTC
fa09ca5 Merge tag 'block-5.16-2021-12-17' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: - Fix for hammering on the delayed run queue timer (me) - bcache regression fix for this merge window (Lin) - Fix a divide-by-zero in the blk-iocost code (Tejun) * tag 'block-5.16-2021-12-17' of git://git.kernel.dk/linux-block: bcache: fix NULL pointer reference in cached_dev_detach_finish block: reduce kblockd_mod_delayed_work_on() CPU consumption iocost: Fix divide-by-zero on donation from low hweight cgroup 17 December 2021, 19:46:07 UTC
cb29eee Merge tag 'io_uring-5.16-2021-12-17' of git://git.kernel.dk/linux-block Pull io_uring fix from Jens Axboe: "Just a single fix, fixing an issue with the worker creation change that was merged last week" * tag 'io_uring-5.16-2021-12-17' of git://git.kernel.dk/linux-block: io-wq: drop wqe lock before creating new worker 17 December 2021, 19:31:46 UTC
43d1c6a Merge tag 'dmaengine-fix-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A bunch of driver fixes, notably: - uninit variable fix for dw-axi-dmac driver - return value check dw-edma driver - calling wq quiesce inside spinlock and missed completion for idxd driver - mod alias fix for st_fdma driver" * tag 'dmaengine-fix-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: st_fdma: fix MODULE_ALIAS dmaengine: idxd: fix missed completion on abort path dmaengine: ti: k3-udma: Fix smatch warnings dmaengine: idxd: fix calling wq quiesce inside spinlock dmaengine: dw-edma: Fix return value check for dma_set_mask_and_coherent() dmaengine: dw-axi-dmac: Fix uninitialized variable in axi_chan_block_xfer_start() 17 December 2021, 19:25:50 UTC
4f549bf Merge tag 'drm-fixes-2021-12-17-1' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Mostly amdgpu fixes this week scattered around the driver, otherwise one i915, one ast, one simpledrm. There is a revert in the fb-helper for places userspace was using a string that we tried to change. i915: - Fix a bound check in the DMC fw load. ast: - NULL ptr deref fix simpledrm: - pixel clock units fix fb-helper: - userspace regression revert amdgpu: - Fix RLC register offset - GMC fix - Properly cache SMU FW version on Yellow Carp - Fix missing callback on DCN3.1 - Reset DMCUB before HW init - Fix for GMC powergating on PCO - Fix a possible memory leak in GPU metrics table handling on RN" * tag 'drm-fixes-2021-12-17-1' of git://anongit.freedesktop.org/drm/drm: drm/amd/pm: fix a potential gpu_metrics_table memory leak drm/amdgpu: correct the wrong cached state for GMC on PICASSO drm/amd/display: Reset DMCUB before HW init drm/amd/display: Set exit_optimized_pwr_state for DCN31 drm/amd/pm: fix reading SMU FW version from amdgpu_firmware_info on YC drm/amdgpu: don't override default ECO_BITs setting drm/amdgpu: correct register access for RLC_JUMP_TABLE_RESTORE drm/i915/display: Fix an unsigned subtraction which can never be negative. drm/ast: potential dereference of null pointer drm: simpledrm: fix wrong unit with pixel clock Revert "drm/fb-helper: improve DRM fbdev emulation device names" 17 December 2021, 19:07:13 UTC
c4d936e Revert "usb: early: convert to readl_poll_timeout_atomic()" This reverts commit 796eed4b2342c9d6b26c958e92af91253a2390e1. This change causes boot lockups when using "arlyprintk=xdbc" because ktime can not be used at this point in time in the boot process. Also, it is not needed for very small delays like this. Reported-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Fixes: 796eed4b2342 ("usb: early: convert to readl_poll_timeout_atomic()") Link: https://lore.kernel.org/r/c2b5c9bb-1b75-bf56-3754-b5b18812d65e@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 17 December 2021, 15:29:11 UTC
a0b24a5 Merge tag 'usb-serial-5.16-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.16-rc6 Here's a fix for a reported problem in the cp210x gpio-registration code and some more modem device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-5.16-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Telit FN990 compositions USB: serial: cp210x: fix CP2105 GPIO registration 17 December 2021, 09:37:02 UTC
bce472f MAITAINERS: Change zonefs maintainer email address Update my email address from damien.lemoal@wdc.com to damien.lemoal@opensource.wdc.com. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> 17 December 2021, 07:56:49 UTC
8ffea25 zonefs: add MODULE_ALIAS_FS Add MODULE_ALIAS_FS() to load the module automatically when you do "mount -t zonefs". Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system") Cc: stable <stable@vger.kernel.org> # 5.6+ Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Johannes Thumshirn <jth@kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> 17 December 2021, 07:56:35 UTC
f6f7fbb riscv: dts: sifive unmatched: Link the tmp451 with its power supply Fixes the following probe warning: lm90 0-004c: Looking up vcc-supply from device tree lm90 0-004c: Looking up vcc-supply property in node /soc/i2c@10030000/temperature-sensor@4c failed lm90 0-004c: supply vcc not found, using dummy regulator Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 17 December 2021, 05:27:45 UTC
ad931d9 riscv: dts: sifive unmatched: Fix regulator for board rev3 The existing values are rejected by the da9063 regulator driver, as they are unachievable with the declared chip setup (non-merged vcore and bmem are unable to provide the declared curent). Fix voltages to match rev3 schematics, which also matches their boot-up configuration within the chip's available precision. Declare bcore1/bcore2 and bmem/bio as merged. Set ldo09 and ldo10 as always-on as their consumers are not declared but exist. Drop ldo current limits as there is no current limit feature for these regulators in the DA9063. Fixes warnings like: DA9063_LDO3: Operation of current configuration missing Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 17 December 2021, 05:27:36 UTC
cd29cc8 riscv: dts: sifive unmatched: Expose the PMIC sub-functions These sub-functions are available in the chip revision on this board, so expose them. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 17 December 2021, 05:27:29 UTC
8120393 riscv: dts: sifive unmatched: Expose the board ID eeprom Mark it as read-only as it is factory-programmed with identifying information, and no executable nor configuration: - eth MAC address - board model (PCB version, BoM version) - board serial number Accidental modification would cause misidentification which could brick the board, so marking read-only seem like both a safe and non-constraining choice. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 17 December 2021, 05:27:21 UTC
ea81b91 riscv: dts: sifive unmatched: Name gpio lines Follow the pin descriptions given in the version 3 of the board schematics. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 17 December 2021, 05:27:14 UTC
a2fbfd5 Merge tag 'amd-drm-fixes-5.16-2021-12-15' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.16-2021-12-15: amdgpu: - Fix RLC register offset - GMC fix - Properly cache SMU FW version on Yellow Carp - Fix missing callback on DCN3.1 - Reset DMCUB before HW init - Fix for GMC powergating on PCO - Fix a possible memory leak in GPU metrics table handling on RN Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211216035239.5787-1-alexander.deucher@amd.com 17 December 2021, 05:01:01 UTC
78fed39 Merge tag 'drm-misc-fixes-2021-12-16-1' of ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes One null pointer dereference fix for ast, a pixel clock unit fix for simpledrm and a user-space regression revert for fb-helper Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211216082603.pm6yzlckmxvwnqyv@houat 17 December 2021, 04:17:19 UTC
5da5231 libata: if T_LENGTH is zero, dma direction should be DMA_NONE Avoid data corruption by rejecting pass-through commands where T_LENGTH is zero (No data is transferred) and the dma direction is not DMA_NONE. Cc: <stable@vger.kernel.org> Reported-by: syzkaller<syzkaller@googlegroups.com> Signed-off-by: George Kennedy<george.kennedy@oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> 17 December 2021, 00:32:13 UTC
6441998 Merge tag 'audit-pr-20211216' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit fix from Paul Moore: "A single patch to fix a problem where the audit queue could grow unbounded when the audit daemon is forcibly stopped" * tag 'audit-pr-20211216' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: improve robustness of the audit queue handling 16 December 2021, 23:24:46 UTC
180f3bc Merge tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from mac80211, wifi, bpf. Relatively large batches of fixes from BPF and the WiFi stack, calm in general networking. Current release - regressions: - dpaa2-eth: fix buffer overrun when reporting ethtool statistics Current release - new code bugs: - bpf: fix incorrect state pruning for <8B spill/fill - iavf: - add missing unlocks in iavf_watchdog_task() - do not override the adapter state in the watchdog task (again) - mlxsw: spectrum_router: consolidate MAC profiles when possible Previous releases - regressions: - mac80211 fixes: - rate control, avoid driver crash for retransmitted frames - regression in SSN handling of addba tx - a memory leak where sta_info is not freed - marking TX-during-stop for TX in in_reconfig, prevent stall - cfg80211: acquire wiphy mutex on regulatory work - wifi drivers: fix build regressions and LED config dependency - virtio_net: fix rx_drops stat for small pkts - dsa: mv88e6xxx: unforce speed & duplex in mac_link_down() Previous releases - always broken: - bpf fixes: - kernel address leakage in atomic fetch - kernel address leakage in atomic cmpxchg's r0 aux reg - signed bounds propagation after mov32 - extable fixup offset - extable address check - mac80211: - fix the size used for building probe request - send ADDBA requests using the tid/queue of the aggregation session - agg-tx: don't schedule_and_wake_txq() under sta->lock, avoid deadlocks - validate extended element ID is present - mptcp: - never allow the PM to close a listener subflow (null-defer) - clear 'kern' flag from fallback sockets, prevent crash - fix deadlock in __mptcp_push_pending() - inet_diag: fix kernel-infoleak for UDP sockets - xsk: do not sleep in poll() when need_wakeup set - smc: avoid very long waits in smc_release() - sch_ets: don't remove idle classes from the round-robin list - netdevsim: - zero-initialize memory for bpf map's value, prevent info leak - don't let user space overwrite read only (max) ethtool parms - ixgbe: set X550 MDIO speed before talking to PHY - stmmac: - fix null-deref in flower deletion w/ VLAN prio Rx steering - dwmac-rk: fix oob read in rk_gmac_setup - ice: time stamping fixes - systemport: add global locking for descriptor life cycle" * tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (89 commits) bpf, selftests: Fix racing issue in btf_skc_cls_ingress test selftest/bpf: Add a test that reads various addresses. bpf: Fix extable address check. bpf: Fix extable fixup offset. bpf, selftests: Add test case trying to taint map value pointer bpf: Make 32->64 bounds propagation slightly more robust bpf: Fix signed bounds propagation after mov32 sit: do not call ipip6_dev_free() from sit_init_net() net: systemport: Add global locking for descriptor lifecycle net/smc: Prevent smc_release() from long blocking net: Fix double 0x prefix print in SKB dump virtio_net: fix rx_drops stat for small pkts dsa: mv88e6xxx: fix debug print for SPEED_UNFORCED sfc_ef100: potential dereference of null pointer net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup net: usb: lan78xx: add Allied Telesis AT29M2-AF net/packet: rx_owner_map depends on pg_vec netdevsim: Zero-initialize memory for new map's value in function nsim_bpf_map_alloc dpaa2-eth: fix ethtool statistics ixgbe: set X550 MDIO speed before talking to PHY ... 16 December 2021, 23:02:14 UTC
93db830 Merge tag 'soc-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "There are a number of DT fixes, mostly for mistakes found through static checking of the dts files again, as well as a couple of minor changes to address incorrect DT settings. For i.MX, there is yet another series of devitree changes to update RGMII delay settings for ethernet, which is an ongoing problem after some driver changes. For SoC specific device drivers, a number of smaller fixes came up: - i.MX SoC identification was incorrectly registered non-i.MX machines when the driver is built-in - One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work properly - a few compile fixes for warnings that get in the way of -Werror - a string overflow in the scpi firmware driver - a boot failure with FORTIFY_SOURCE on Rockchips machines - broken error handling in the AMD TEE driver - a revert for a tegra reset driver commit that broke HDA" * tag 'soc-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) soc/tegra: fuse: Fix bitwise vs. logical OR warning firmware: arm_scpi: Fix string overflow in SCPI genpd driver soc: imx: Register SoC device only on i.MX boards soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name arm64: dts: imx8mq: remove interconnect property from lcdif ARM: socfpga: dts: fix qspi node compatible arm64: dts: apple: add #interrupt-cells property to pinctrl nodes dt-bindings: i2c: apple,i2c: allow multiple compatibles arm64: meson: remove COMMON_CLK arm64: meson: fix dts for JetHub D1 tee: amdtee: fix an IS_ERR() vs NULL bug arm64: dts: apple: change ethernet0 device type to ethernet arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys arm64: dts: rockchip: fix poweroff on helios64 arm64: dts: rockchip: fix audio-supply for Rock Pi 4 arm64: dts: rockchip: fix rk3399-leez-p710 vcc3v3-lan supply arm64: dts: rockchip: fix rk3308-roc-cc vcc-sd supply arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge ARM: rockchip: Use memcpy_toio instead of memcpy on smp bring-up ... 16 December 2021, 22:48:57 UTC
cc274ae selinux: fix sleeping function called from invalid context selinux_sb_mnt_opts_compat() is called via sget_fc() under the sb_lock spinlock, so it can't use GFP_KERNEL allocations: [ 868.565200] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:230 [ 868.568246] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 4914, name: mount.nfs [ 868.569626] preempt_count: 1, expected: 0 [ 868.570215] RCU nest depth: 0, expected: 0 [ 868.570809] Preemption disabled at: [ 868.570810] [<0000000000000000>] 0x0 [ 868.571848] CPU: 1 PID: 4914 Comm: mount.nfs Kdump: loaded Tainted: G W 5.16.0-rc5.2585cf9dfa #1 [ 868.573273] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014 [ 868.574478] Call Trace: [ 868.574844] <TASK> [ 868.575156] dump_stack_lvl+0x34/0x44 [ 868.575692] __might_resched.cold+0xd6/0x10f [ 868.576308] slab_pre_alloc_hook.constprop.0+0x89/0xf0 [ 868.577046] __kmalloc_track_caller+0x72/0x420 [ 868.577684] ? security_context_to_sid_core+0x48/0x2b0 [ 868.578569] kmemdup_nul+0x22/0x50 [ 868.579108] security_context_to_sid_core+0x48/0x2b0 [ 868.579854] ? _nfs4_proc_pathconf+0xff/0x110 [nfsv4] [ 868.580742] ? nfs_reconfigure+0x80/0x80 [nfs] [ 868.581355] security_context_str_to_sid+0x36/0x40 [ 868.581960] selinux_sb_mnt_opts_compat+0xb5/0x1e0 [ 868.582550] ? nfs_reconfigure+0x80/0x80 [nfs] [ 868.583098] security_sb_mnt_opts_compat+0x2a/0x40 [ 868.583676] nfs_compare_super+0x113/0x220 [nfs] [ 868.584249] ? nfs_try_mount_request+0x210/0x210 [nfs] [ 868.584879] sget_fc+0xb5/0x2f0 [ 868.585267] nfs_get_tree_common+0x91/0x4a0 [nfs] [ 868.585834] vfs_get_tree+0x25/0xb0 [ 868.586241] fc_mount+0xe/0x30 [ 868.586605] do_nfs4_mount+0x130/0x380 [nfsv4] [ 868.587160] nfs4_try_get_tree+0x47/0xb0 [nfsv4] [ 868.587724] vfs_get_tree+0x25/0xb0 [ 868.588193] do_new_mount+0x176/0x310 [ 868.588782] __x64_sys_mount+0x103/0x140 [ 868.589388] do_syscall_64+0x3b/0x90 [ 868.589935] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 868.590699] RIP: 0033:0x7f2b371c6c4e [ 868.591239] Code: 48 8b 0d dd 71 0e 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d aa 71 0e 00 f7 d8 64 89 01 48 [ 868.593810] RSP: 002b:00007ffc83775d88 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [ 868.594691] RAX: ffffffffffffffda RBX: 00007ffc83775f10 RCX: 00007f2b371c6c4e [ 868.595504] RDX: 0000555d517247a0 RSI: 0000555d51724700 RDI: 0000555d51724540 [ 868.596317] RBP: 00007ffc83775f10 R08: 0000555d51726890 R09: 0000555d51726890 [ 868.597162] R10: 0000000000000000 R11: 0000000000000246 R12: 0000555d51726890 [ 868.598005] R13: 0000000000000003 R14: 0000555d517246e0 R15: 0000555d511ac925 [ 868.598826] </TASK> Cc: stable@vger.kernel.org Fixes: 69c4a42d72eb ("lsm,selinux: add new hook to compare new mount to an existing mount") Signed-off-by: Scott Mayhew <smayhew@redhat.com> [PM: cleanup/line-wrap the backtrace] Signed-off-by: Paul Moore <paul@paul-moore.com> 16 December 2021, 22:47:39 UTC
0c3e247 Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2021-12-16 We've added 15 non-merge commits during the last 7 day(s) which contain a total of 12 files changed, 434 insertions(+), 30 deletions(-). The main changes are: 1) Fix incorrect verifier state pruning behavior for <8B register spill/fill, from Paul Chaignon. 2) Fix x86-64 JIT's extable handling for fentry/fexit when return pointer is an ERR_PTR(), from Alexei Starovoitov. 3) Fix 3 different possibilities that BPF verifier missed where unprivileged could leak kernel addresses, from Daniel Borkmann. 4) Fix xsk's poll behavior under need_wakeup flag, from Magnus Karlsson. 5) Fix an oob-write in test_verifier due to a missed MAX_NR_MAPS bump, from Kumar Kartikeya Dwivedi. 6) Fix a race in test_btf_skc_cls_ingress selftest, from Martin KaFai Lau. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, selftests: Fix racing issue in btf_skc_cls_ingress test selftest/bpf: Add a test that reads various addresses. bpf: Fix extable address check. bpf: Fix extable fixup offset. bpf, selftests: Add test case trying to taint map value pointer bpf: Make 32->64 bounds propagation slightly more robust bpf: Fix signed bounds propagation after mov32 bpf, selftests: Update test case for atomic cmpxchg on r0 with pointer bpf: Fix kernel address leakage in atomic cmpxchg's r0 aux reg bpf, selftests: Add test case for atomic fetch on spilled pointer bpf: Fix kernel address leakage in atomic fetch selftests/bpf: Fix OOB write in test_verifier xsk: Do not sleep in poll() when need_wakeup set selftests/bpf: Tests for state pruning with u32 spill/fill bpf: Fix incorrect state pruning for <8B spill/fill ==================== Link: https://lore.kernel.org/r/20211216210005.13815-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> 16 December 2021, 21:06:49 UTC
c2fcbf8 bpf, selftests: Fix racing issue in btf_skc_cls_ingress test The libbpf CI reported occasional failure in btf_skc_cls_ingress: test_syncookie:FAIL:Unexpected syncookie states gen_cookie:80326634 recv_cookie:0 bpf prog error at line 97 "error at line 97" means the bpf prog cannot find the listening socket when the final ack is received. It then skipped processing the syncookie in the final ack which then led to "recv_cookie:0". The problem is the userspace program did not do accept() and went ahead to close(listen_fd) before the kernel (and the bpf prog) had a chance to process the final ack. The fix is to add accept() call so that the userspace will wait for the kernel to finish processing the final ack first before close()-ing everything. Fixes: 9a856cae2217 ("bpf: selftest: Add test_btf_skc_cls_ingress") Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211216191630.466151-1-kafai@fb.com 16 December 2021, 20:41:18 UTC
7edc3fc selftest/bpf: Add a test that reads various addresses. Add a function to bpf_testmod that returns invalid kernel and user addresses. Then attach an fexit program to that function that tries to read memory through these addresses. This logic checks that bpf_probe_read_kernel and BPF_PROBE_MEM logic is sane. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> 16 December 2021, 20:41:13 UTC
588a25e bpf: Fix extable address check. The verifier checks that PTR_TO_BTF_ID pointer is either valid or NULL, but it cannot distinguish IS_ERR pointer from valid one. When offset is added to IS_ERR pointer it may become small positive value which is a user address that is not handled by extable logic and has to be checked for at the runtime. Tighten BPF_PROBE_MEM pointer check code to prevent this case. Fixes: 4c5de127598e ("bpf: Emit explicit NULL pointer checks for PROBE_LDX instructions.") Reported-by: Lorenzo Fontana <lorenzo.fontana@elastic.co> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> 16 December 2021, 20:41:04 UTC
433956e bpf: Fix extable fixup offset. The prog - start_of_ldx is the offset before the faulting ldx to the location after it, so this will be used to adjust pt_regs->ip for jumping over it and continuing, and with old temp it would have been fixed up to the wrong offset, causing crash. Fixes: 4c5de127598e ("bpf: Emit explicit NULL pointer checks for PROBE_LDX instructions.") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> 16 December 2021, 20:18:26 UTC
a52a8e9 Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "A single fix for the clk framework that needed some more bake time in linux-next. The problem is that two clks being registered at the same time can lead to a busted clk tree if the parent isn't fully registered by the time the child finds the parent. We rejigger the place where we mark the parent as fully registered so that the child can't find the parent until things are proper" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Don't parent clks until the parent is fully registered 16 December 2021, 19:48:59 UTC
b1a7288 bpf, selftests: Add test case trying to taint map value pointer Add a test case which tries to taint map value pointer arithmetic into a unknown scalar with subsequent export through the map. Before fix: # ./test_verifier 1186 #1186/u map access: trying to leak tained dst reg FAIL Unexpected success to load! verification time 24 usec stack depth 8 processed 15 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1 #1186/p map access: trying to leak tained dst reg FAIL Unexpected success to load! verification time 8 usec stack depth 8 processed 15 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1 Summary: 0 PASSED, 0 SKIPPED, 2 FAILED After fix: # ./test_verifier 1186 #1186/u map access: trying to leak tained dst reg OK #1186/p map access: trying to leak tained dst reg OK Summary: 2 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> 16 December 2021, 18:46:06 UTC
e572ff8 bpf: Make 32->64 bounds propagation slightly more robust Make the bounds propagation in __reg_assign_32_into_64() slightly more robust and readable by aligning it similarly as we did back in the __reg_combine_64_into_32() counterpart. Meaning, only propagate or pessimize them as a smin/smax pair. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> 16 December 2021, 18:45:56 UTC
3cf2b61 bpf: Fix signed bounds propagation after mov32 For the case where both s32_{min,max}_value bounds are positive, the __reg_assign_32_into_64() directly propagates them to their 64 bit counterparts, otherwise it pessimises them into [0,u32_max] universe and tries to refine them later on by learning through the tnum as per comment in mentioned function. However, that does not always happen, for example, in mov32 operation we call zext_32_to_64(dst_reg) which invokes the __reg_assign_32_into_64() as is without subsequent bounds update as elsewhere thus no refinement based on tnum takes place. Thus, not calling into the __update_reg_bounds() / __reg_deduce_bounds() / __reg_bound_offset() triplet as we do, for example, in case of ALU ops via adjust_scalar_min_max_vals(), will lead to more pessimistic bounds when dumping the full register state: Before fix: 0: (b4) w0 = -1 1: R0_w=invP4294967295 (id=0,imm=ffffffff, smin_value=4294967295,smax_value=4294967295, umin_value=4294967295,umax_value=4294967295, var_off=(0xffffffff; 0x0), s32_min_value=-1,s32_max_value=-1, u32_min_value=-1,u32_max_value=-1) 1: (bc) w0 = w0 2: R0_w=invP4294967295 (id=0,imm=ffffffff, smin_value=0,smax_value=4294967295, umin_value=4294967295,umax_value=4294967295, var_off=(0xffffffff; 0x0), s32_min_value=-1,s32_max_value=-1, u32_min_value=-1,u32_max_value=-1) Technically, the smin_value=0 and smax_value=4294967295 bounds are not incorrect, but given the register is still a constant, they break assumptions about const scalars that smin_value == smax_value and umin_value == umax_value. After fix: 0: (b4) w0 = -1 1: R0_w=invP4294967295 (id=0,imm=ffffffff, smin_value=4294967295,smax_value=4294967295, umin_value=4294967295,umax_value=4294967295, var_off=(0xffffffff; 0x0), s32_min_value=-1,s32_max_value=-1, u32_min_value=-1,u32_max_value=-1) 1: (bc) w0 = w0 2: R0_w=invP4294967295 (id=0,imm=ffffffff, smin_value=4294967295,smax_value=4294967295, umin_value=4294967295,umax_value=4294967295, var_off=(0xffffffff; 0x0), s32_min_value=-1,s32_max_value=-1, u32_min_value=-1,u32_max_value=-1) Without the smin_value == smax_value and umin_value == umax_value invariant being intact for const scalars, it is possible to leak out kernel pointers from unprivileged user space if the latter is enabled. For example, when such registers are involved in pointer arithmtics, then adjust_ptr_min_max_vals() will taint the destination register into an unknown scalar, and the latter can be exported and stored e.g. into a BPF map value. Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Kuee K1r0a <liulin063@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> 16 December 2021, 18:45:46 UTC
fa36bbe Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Fix missing error code on kexec failure path" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kexec: Fix missing error code 'ret' warning in load_other_segments() 16 December 2021, 18:44:20 UTC
81eebd5 Merge tag 'for-5.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix use after free in DM btree remove's rebalance_children() - Fix DM integrity data corruption, introduced during 5.16 merge, due to improper use of bvec_kmap_local() * tag 'for-5.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm integrity: fix data corruption due to improper use of bvec_kmap_local dm btree remove: fix use after free in rebalance_children() 16 December 2021, 18:05:49 UTC
9c5d89b arm64: kexec: Fix missing error code 'ret' warning in load_other_segments() Since commit ac10be5cdbfa ("arm64: Use common of_kexec_alloc_and_setup_fdt()"), smatch reports the following warning: arch/arm64/kernel/machine_kexec_file.c:152 load_other_segments() warn: missing error code 'ret' Return code is not set to an error code in load_other_segments() when of_kexec_alloc_and_setup_fdt() call returns a NULL dtb. This results in status success (return code set to 0) being returned from load_other_segments(). Set return code to -EINVAL if of_kexec_alloc_and_setup_fdt() returns NULL dtb. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: ac10be5cdbfa ("arm64: Use common of_kexec_alloc_and_setup_fdt()") Link: https://lore.kernel.org/r/20211210010121.101823-1-nramas@linux.microsoft.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 16 December 2021, 17:44:58 UTC
1744a22 afs: Fix mmap Fix afs_add_open_map() to check that the vnode isn't already on the list when it adds it. It's possible that afs_drop_open_mmap() decremented the cb_nr_mmap counter, but hadn't yet got into the locked section to remove it. Also vnode->cb_mmap_link should be initialised, so fix that too. Fixes: 6e0e99d58a65 ("afs: Fix mmap coherency vs 3rd-party changes") Reported-by: kafs-testing+fedora34_64checkkafs-build-300@auristor.com Suggested-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: kafs-testing+fedora34_64checkkafs-build-300@auristor.com cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/686465.1639435380@warthog.procyon.org.uk/ # v1 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 December 2021, 17:10:13 UTC
e28587c sit: do not call ipip6_dev_free() from sit_init_net() ipip6_dev_free is sit dev->priv_destructor, already called by register_netdevice() if something goes wrong. Alternative would be to make ipip6_dev_free() robust against multiple invocations, but other drivers do not implement this strategy. syzbot reported: dst_release underflow WARNING: CPU: 0 PID: 5059 at net/core/dst.c:173 dst_release+0xd8/0xe0 net/core/dst.c:173 Modules linked in: CPU: 1 PID: 5059 Comm: syz-executor.4 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:dst_release+0xd8/0xe0 net/core/dst.c:173 Code: 4c 89 f2 89 d9 31 c0 5b 41 5e 5d e9 da d5 44 f9 e8 1d 90 5f f9 c6 05 87 48 c6 05 01 48 c7 c7 80 44 99 8b 31 c0 e8 e8 67 29 f9 <0f> 0b eb 85 0f 1f 40 00 53 48 89 fb e8 f7 8f 5f f9 48 83 c3 a8 48 RSP: 0018:ffffc9000aa5faa0 EFLAGS: 00010246 RAX: d6894a925dd15a00 RBX: 00000000ffffffff RCX: 0000000000040000 RDX: ffffc90005e19000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: 0000000000000000 R08: ffffffff816a1f42 R09: ffffed1017344f2c R10: ffffed1017344f2c R11: 0000000000000000 R12: 0000607f462b1358 R13: 1ffffffff1bfd305 R14: ffffe8ffffcb1358 R15: dffffc0000000000 FS: 00007f66c71a2700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f88aaed5058 CR3: 0000000023e0f000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dst_cache_destroy+0x107/0x1e0 net/core/dst_cache.c:160 ipip6_dev_free net/ipv6/sit.c:1414 [inline] sit_init_net+0x229/0x550 net/ipv6/sit.c:1936 ops_init+0x313/0x430 net/core/net_namespace.c:140 setup_net+0x35b/0x9d0 net/core/net_namespace.c:326 copy_net_ns+0x359/0x5c0 net/core/net_namespace.c:470 create_new_namespaces+0x4ce/0xa00 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0x11e/0x180 kernel/nsproxy.c:226 ksys_unshare+0x57d/0xb50 kernel/fork.c:3075 __do_sys_unshare kernel/fork.c:3146 [inline] __se_sys_unshare kernel/fork.c:3144 [inline] __x64_sys_unshare+0x34/0x40 kernel/fork.c:3144 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f66c882ce99 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f66c71a2168 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f66c893ff60 RCX: 00007f66c882ce99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000048040200 RBP: 00007f66c8886ff1 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff6634832f R14: 00007f66c71a2300 R15: 0000000000022000 </TASK> Fixes: cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20211216111741.1387540-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 16 December 2021, 16:38:10 UTC
8b8e6e7 net: systemport: Add global locking for descriptor lifecycle The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues. This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length. The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer. The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211215202450.4086240-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 16 December 2021, 16:15:31 UTC
5c15b31 net/smc: Prevent smc_release() from long blocking In nginx/wrk benchmark, there's a hung problem with high probability on case likes that: (client will last several minutes to exit) server: smc_run nginx client: smc_run wrk -c 10000 -t 1 http://server Client hangs with the following backtrace: 0 [ffffa7ce8Of3bbf8] __schedule at ffffffff9f9eOd5f 1 [ffffa7ce8Of3bc88] schedule at ffffffff9f9eløe6 2 [ffffa7ce8Of3bcaO] schedule_timeout at ffffffff9f9e3f3c 3 [ffffa7ce8Of3bd2O] wait_for_common at ffffffff9f9el9de 4 [ffffa7ce8Of3bd8O] __flush_work at ffffffff9fOfeOl3 5 [ffffa7ce8øf3bdfO] smc_release at ffffffffcO697d24 [smc] 6 [ffffa7ce8Of3be2O] __sock_release at ffffffff9f8O2e2d 7 [ffffa7ce8Of3be4ø] sock_close at ffffffff9f8ø2ebl 8 [ffffa7ce8øf3be48] __fput at ffffffff9f334f93 9 [ffffa7ce8Of3be78] task_work_run at ffffffff9flOlff5 10 [ffffa7ce8Of3beaO] do_exit at ffffffff9fOe5Ol2 11 [ffffa7ce8Of3bflO] do_group_exit at ffffffff9fOe592a 12 [ffffa7ce8Of3bf38] __x64_sys_exit_group at ffffffff9fOe5994 13 [ffffa7ce8Of3bf4O] do_syscall_64 at ffffffff9f9d4373 14 [ffffa7ce8Of3bfsO] entry_SYSCALL_64_after_hwframe at ffffffff9fa0007c This issue dues to flush_work(), which is used to wait for smc_connect_work() to finish in smc_release(). Once lots of smc_connect_work() was pending or all executing work dangling, smc_release() has to block until one worker comes to free, which is equivalent to wait another smc_connnect_work() to finish. In order to fix this, There are two changes: 1. For those idle smc_connect_work(), cancel it from the workqueue; for executing smc_connect_work(), waiting for it to finish. For that purpose, replace flush_work() with cancel_work_sync(). 2. Since smc_connect() hold a reference for passive closing, if smc_connect_work() has been cancelled, release the reference. Fixes: 24ac3a08e658 ("net/smc: rebuild nonblocking connect") Reported-by: Tony Lu <tonylu@linux.alibaba.com> Tested-by: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/1639571361-101128-1-git-send-email-alibuda@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 16 December 2021, 16:11:05 UTC
4bc73b7 Merge tag 'tegra-for-5.16-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes soc/tegra: Fixes for v5.16-rc6 This contains a single build fix without which ARM allmodconfig builds are broken if -Werror is enabled. * tag 'tegra-for-5.16-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: fuse: Fix bitwise vs. logical OR warning Link: https://lore.kernel.org/r/20211215162618.3568474-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 16 December 2021, 14:02:26 UTC
8a03ef6 net: Fix double 0x prefix print in SKB dump When printing netdev features %pNF already takes care of the 0x prefix, remove the explicit one. Fixes: 6413139dfc64 ("skbuff: increase verbosity when dumping skb data") Signed-off-by: Gal Pressman <gal@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2021, 11:08:15 UTC
053c9e1 virtio_net: fix rx_drops stat for small pkts We found the stat of rx drops for small pkts does not increment when build_skb fail, it's not coherent with other mode's rx drops stat. Signed-off-by: Wenliang Wang <wangwenliang.1995@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2021, 11:07:19 UTC
e08cdf6 dsa: mv88e6xxx: fix debug print for SPEED_UNFORCED Debug print uses invalid check to detect if speed is unforced: (speed != SPEED_UNFORCED) should be used instead of (!speed). Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Andrey Eremeev <Axtone4all@yandex.ru> Fixes: 96a2b40c7bd3 ("net: dsa: mv88e6xxx: add port's MAC speed setter") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2021, 10:57:21 UTC
407ecd1 sfc_ef100: potential dereference of null pointer The return value of kmalloc() needs to be checked. To avoid use in efx_nic_update_stats() in case of the failure of alloc. Fixes: b593b6f1b492 ("sfc_ef100: statistics gathering") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2021, 10:55:32 UTC
0546b22 net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup KASAN reports an out-of-bounds read in rk_gmac_setup on the line: while (ops->regs[i]) { This happens for most platforms since the regs flexible array member is empty, so the memory after the ops structure is being read here. It seems that mostly this happens to contain zero anyway, so we get lucky and everything still works. To avoid adding redundant data to nearly all the ops structures, add a new flag to indicate whether the regs field is valid and avoid this loop when it is not. Fixes: 3bb3d6b1c195 ("net: stmmac: Add RK3566/RK3568 SoC support") Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2021, 10:47:48 UTC
6209dd7 Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-12-15 This series contains updates to igb, igbvf, igc and ixgbe drivers. Karen moves checks for invalid VF MAC filters to occur earlier for igb. Letu Ren fixes a double free issue in igbvf probe. Sasha fixes incorrect min value being used when calculating for max for igc. Robert Schlabbach adds documentation on enabling NBASE-T support for ixgbe. Cyril Novikov adds missing initialization of MDIO bus speed for ixgbe. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2021, 10:27:12 UTC
ef8a0f6 net: usb: lan78xx: add Allied Telesis AT29M2-AF This adds the vendor and product IDs for the AT29M2-AF which is a lan7801-based device. Signed-off-by: Greg Jesionowski <jesionowskigreg@gmail.com> Link: https://lore.kernel.org/r/20211214221027.305784-1-jesionowskigreg@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 16 December 2021, 03:06:14 UTC
ec6af09 net/packet: rx_owner_map depends on pg_vec Packet sockets may switch ring versions. Avoid misinterpreting state between versions, whose fields share a union. rx_owner_map is only allocated with a packet ring (pg_vec) and both are swapped together. If pg_vec is NULL, meaning no packet ring was allocated, then neither was rx_owner_map. And the field may be old state from a tpacket_v3. Fixes: 61fad6816fc1 ("net/packet: tpacket_rcv: avoid a producer race condition") Reported-by: Syzbot <syzbot+1ac0994a0a0c55151121@syzkaller.appspotmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20211215143937.106178-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 16 December 2021, 01:49:36 UTC
4812217 netdevsim: Zero-initialize memory for new map's value in function nsim_bpf_map_alloc Zero-initialize memory for new map's value in function nsim_bpf_map_alloc since it may cause a potential kernel information leak issue, as follows: 1. nsim_bpf_map_alloc calls nsim_map_alloc_elem to allocate elements for a new map. 2. nsim_map_alloc_elem uses kmalloc to allocate map's value, but doesn't zero it. 3. A user application can use IOCTL BPF_MAP_LOOKUP_ELEM to get specific element's information in the map. 4. The kernel function map_lookup_elem will call bpf_map_copy_value to get the information allocated at step-2, then use copy_to_user to copy to the user buffer. This can only leak information for an array map. Fixes: 395cacb5f1a0 ("netdevsim: bpf: support fake map offload") Suggested-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Haimin Zhang <tcs.kernel@gmail.com> Link: https://lore.kernel.org/r/20211215111530.72103-1-tcs.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 16 December 2021, 01:49:13 UTC
972ce7e dpaa2-eth: fix ethtool statistics Unfortunately, with the blamed commit I also added a side effect in the ethtool stats shown. Because I added two more fields in the per channel structure without verifying if its size is used in any way, part of the ethtool statistics were off by 2. Fix this by not looking up the size of the structure but instead on a fixed value kept in a macro. Fixes: fc398bec0387 ("net: dpaa2: add adaptive interrupt coalescing") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20211215105831.290070-1-ioana.ciornei@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 16 December 2021, 01:48:54 UTC
c9f0322 Merge tag 'drm-intel-fixes-2021-12-15' of ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes Fix a bound check in the DMC fw load. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YbnGvnsX/H3rKAqO@intel.com 16 December 2021, 00:22:34 UTC
ca4d834 usb: typec: tcpm: fix tcpm unregister port but leave a pending timer In current design, when the tcpm port is unregisterd, the kthread_worker will be destroyed in the last step. Inside the kthread_destroy_worker(), the worker will flush all the works and wait for them to end. However, if one of the works calls hrtimer_start(), this hrtimer will be pending until timeout even though tcpm port is removed. Once the hrtimer timeout, many strange kernel dumps appear. Thus, we can first complete kthread_destroy_worker(), then cancel all the hrtimers. This will guarantee that no hrtimer is pending at the end. Fixes: 3ed8e1c2ac99 ("usb: typec: tcpm: Migrate workqueue to RT priority for processing events") cc: <stable@vger.kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20211209101507.499096-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 15 December 2021, 22:45:30 UTC
4c4e162 usb: cdnsp: Fix lack of spin_lock_irqsave/spin_lock_restore Patch puts content of cdnsp_gadget_pullup function inside spin_lock_irqsave and spin_lock_restore section. This construction is required here to keep the data consistency, otherwise some data can be changed e.g. from interrupt context. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Reported-by: Ken (Jian) He <jianhe@ambarella.com> cc: <stable@vger.kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> -- Changelog: v2: - added disable_irq/enable_irq as sugester by Peter Chen drivers/usb/cdns3/cdnsp-gadget.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) Reviewed-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20211214045527.26823-1-pawell@gli-login.cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 15 December 2021, 22:44:31 UTC
0ad3bd5 USB: NO_LPM quirk Lenovo USB-C to Ethernet Adapher(RTL8153-04) This device doesn't work well with LPM, losing connectivity intermittently. Disable LPM to resolve the issue. Reviewed-by: <markpearson@lenovo.com> Signed-off-by: Jimmy Wang <wangjm221@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211214012652.4898-1-wangjm221@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 15 December 2021, 22:42:33 UTC
f886d4f usb: xhci: Extend support for runtime power management for AMD's Yellow carp. AMD's Yellow Carp platform has few more XHCI controllers, enable the runtime power management support for the same. Signed-off-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211215093216.1839065-1-Nehal-Bakulchandra.shah@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 15 December 2021, 22:38:53 UTC
6c33ff7 serial: 8250_fintek: Fix garbled text for console Commit fab8a02b73eb ("serial: 8250_fintek: Enable high speed mode on Fintek F81866") introduced support to use high baudrate with Fintek SuperIO UARTs. It'll change clocksources when the UART probed. But when user add kernel parameter "console=ttyS0,115200 console=tty0" to make the UART as console output, the console will output garbled text after the following kernel message. [ 3.681188] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled The issue is occurs in following step: probe_setup_port() -> fintek_8250_goto_highspeed() It change clocksource from 115200 to 921600 with wrong time, it should change clocksource in set_termios() not in probed. The following 3 patches are implemented change clocksource in fintek_8250_set_termios(). Commit 58178914ae5b ("serial: 8250_fintek: UART dynamic clocksource on Fintek F81216H") Commit 195638b6d44f ("serial: 8250_fintek: UART dynamic clocksource on Fintek F81866") Commit 423d9118c624 ("serial: 8250_fintek: Add F81966 Support") Due to the high baud rate had implemented above 3 patches and the patch Commit fab8a02b73eb ("serial: 8250_fintek: Enable high speed mode on Fintek F81866") is bugged, So this patch will remove it. Fixes: fab8a02b73eb ("serial: 8250_fintek: Enable high speed mode on Fintek F81866") Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Link: https://lore.kernel.org/r/20211215075835.2072-1-hpeter+linux_kernel@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 15 December 2021, 20:51:07 UTC
1ee33b1 tty: n_hdlc: make n_hdlc_tty_wakeup() asynchronous syzbot is reporting that an unprivileged user who logged in from tty console can crash the system using a reproducer shown below [1], for n_hdlc_tty_wakeup() is synchronously calling n_hdlc_send_frames(). ---------- #include <sys/ioctl.h> #include <unistd.h> int main(int argc, char *argv[]) { const int disc = 0xd; ioctl(1, TIOCSETD, &disc); while (1) { ioctl(1, TCXONC, 0); write(1, "", 1); ioctl(1, TCXONC, 1); /* Kernel panic - not syncing: scheduling while atomic */ } } ---------- Linus suspected that "struct tty_ldisc"->ops->write_wakeup() must not sleep, and Jiri confirmed it from include/linux/tty_ldisc.h. Thus, defer n_hdlc_send_frames() from n_hdlc_tty_wakeup() to a WQ context like net/nfc/nci/uart.c does. Link: https://syzkaller.appspot.com/bug?extid=5f47a8cea6a12b77a876 [1] Reported-by: syzbot <syzbot+5f47a8cea6a12b77a876@syzkaller.appspotmail.com> Cc: stable <stable@vger.kernel.org> Analyzed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Confirmed-by: Jiri Slaby <jirislaby@kernel.org> Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/40de8b7e-a3be-4486-4e33-1b1d1da452f8@i-love.sakura.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 15 December 2021, 20:50:39 UTC
bf0a375 ixgbe: set X550 MDIO speed before talking to PHY The MDIO bus speed must be initialized before talking to the PHY the first time in order to avoid talking to it using a speed that the PHY doesn't support. This fixes HW initialization error -17 (IXGBE_ERR_PHY_ADDR_INVALID) on Denverton CPUs (a.k.a. the Atom C3000 family) on ports with a 10Gb network plugged in. On those devices, HLREG0[MDCSPD] resets to 1, which combined with the 10Gb network results in a 24MHz MDIO speed, which is apparently too fast for the connected PHY. PHY register reads over MDIO bus return garbage, leading to initialization failure. Reproduced with Linux kernel 4.19 and 5.15-rc7. Can be reproduced using the following setup: * Use an Atom C3000 family system with at least one X552 LAN on the SoC * Disable PXE or other BIOS network initialization if possible (the interface must not be initialized before Linux boots) * Connect a live 10Gb Ethernet cable to an X550 port * Power cycle (not reset, doesn't always work) the system and boot Linux * Observe: ixgbe interfaces w/ 10GbE cables plugged in fail with error -17 Fixes: e84db7272798 ("ixgbe: Introduce function to control MDIO speed") Signed-off-by: Cyril Novikov <cnovikov@lynx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> 15 December 2021, 19:24:39 UTC
1cef171 dm integrity: fix data corruption due to improper use of bvec_kmap_local Commit 25058d1c725c ("dm integrity: use bvec_kmap_local in __journal_read_write") didn't account for __journal_read_write() later adding the biovec's bv_offset. As such using bvec_kmap_local() caused the start of the biovec to be skipped. Trivial test that illustrates data corruption: # integritysetup format /dev/pmem0 # integritysetup open /dev/pmem0 integrityroot # mkfs.xfs /dev/mapper/integrityroot ... bad magic number bad magic number Metadata corruption detected at xfs_sb block 0x0/0x1000 libxfs_writebufr: write verifer failed on xfs_sb bno 0x0/0x1000 releasing dirty buffer (bulk) to free list! Fix this by using kmap_local_page() instead of bvec_kmap_local() in __journal_read_write(). Fixes: 25058d1c725c ("dm integrity: use bvec_kmap_local in __journal_read_write") Reported-by: Tony Asleson <tasleson@redhat.com> Reviewed-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> 15 December 2021, 19:16:35 UTC
271225f ixgbe: Document how to enable NBASE-T support Commit a296d665eae1 ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support") introduced suppression of the advertisement of NBASE-T speeds by default, according to Todd Fujinaka to accommodate customers with network switches which could not cope with advertised NBASE-T speeds, as posted in the E1000-devel mailing list: https://sourceforge.net/p/e1000/mailman/message/37106269/ However, the suppression was not documented at all, nor was how to enable NBASE-T support. Properly document the NBASE-T suppression and how to enable NBASE-T support. Fixes: a296d665eae1 ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support") Reported-by: Robert Schlabbach <robert_s@gmx.net> Signed-off-by: Robert Schlabbach <robert_s@gmx.net> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> 15 December 2021, 19:09:29 UTC
0182d1f igc: Fix typo in i225 LTR functions The LTR maximum value was incorrectly written using the scale from the LTR minimum value. This would cause incorrect values to be sent, in cases where the initial calculation lead to different min/max scales. Fixes: 707abf069548 ("igc: Add initial LTR support") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> 15 December 2021, 19:09:29 UTC
b6d335a igbvf: fix double free in `igbvf_probe` In `igbvf_probe`, if register_netdev() fails, the program will go to label err_hw_init, and then to label err_ioremap. In free_netdev() which is just below label err_ioremap, there is `list_for_each_entry_safe` and `netif_napi_del` which aims to delete all entries in `dev->napi_list`. The program has added an entry `adapter->rx_ring->napi` which is added by `netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has been freed below label err_hw_init. So this a UAF. In terms of how to patch the problem, we can refer to igbvf_remove() and delete the entry before `adapter->rx_ring`. The KASAN logs are as follows: [ 35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450 [ 35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366 [ 35.128360] [ 35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14 [ 35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 35.131749] Call Trace: [ 35.132199] dump_stack_lvl+0x59/0x7b [ 35.132865] print_address_description+0x7c/0x3b0 [ 35.133707] ? free_netdev+0x1fd/0x450 [ 35.134378] __kasan_report+0x160/0x1c0 [ 35.135063] ? free_netdev+0x1fd/0x450 [ 35.135738] kasan_report+0x4b/0x70 [ 35.136367] free_netdev+0x1fd/0x450 [ 35.137006] igbvf_probe+0x121d/0x1a10 [igbvf] [ 35.137808] ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf] [ 35.138751] local_pci_probe+0x13c/0x1f0 [ 35.139461] pci_device_probe+0x37e/0x6c0 [ 35.165526] [ 35.165806] Allocated by task 366: [ 35.166414] ____kasan_kmalloc+0xc4/0xf0 [ 35.167117] foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf] [ 35.168078] igbvf_probe+0x9c5/0x1a10 [igbvf] [ 35.168866] local_pci_probe+0x13c/0x1f0 [ 35.169565] pci_device_probe+0x37e/0x6c0 [ 35.179713] [ 35.179993] Freed by task 366: [ 35.180539] kasan_set_track+0x4c/0x80 [ 35.181211] kasan_set_free_info+0x1f/0x40 [ 35.181942] ____kasan_slab_free+0x103/0x140 [ 35.182703] kfree+0xe3/0x250 [ 35.183239] igbvf_probe+0x1173/0x1a10 [igbvf] [ 35.184040] local_pci_probe+0x13c/0x1f0 Fixes: d4e0fe01a38a0 (igbvf: add new driver to support 82576 virtual functions) Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> 15 December 2021, 19:09:21 UTC
584af82 igb: Fix removal of unicast MAC filters of VFs Move checking condition of VF MAC filter before clearing or adding MAC filter to VF to prevent potential blackout caused by removal of necessary and working VF's MAC filter. Fixes: 1b8b062a99dc ("igb: add VF trust infrastructure") Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> 15 December 2021, 19:08:18 UTC
2b14864 Merge tag 'ceph-for-5.16-rc6' of git://github.com/ceph/ceph-client Pull ceph fixes from Ilya Dryomov: "An SGID directory handling fix (marked for stable), a metrics accounting fix and two fixups to appease static checkers" * tag 'ceph-for-5.16-rc6' of git://github.com/ceph/ceph-client: ceph: fix up non-directory creation in SGID directories ceph: initialize pathlen variable in reconnect_caps_cb ceph: initialize i_size variable in ceph_sync_read ceph: fix duplicate increment of opened_inodes metric 15 December 2021, 19:06:41 UTC
d9c1e64 Merge tag 's390-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Add missing handling of R_390_PLT32DBL relocation type in arch_kexec_apply_relocations_add(). Clang and the upcoming gcc 11.3 generate such relocation entries, which our relocation code silently ignores, and which finally will result in an endless loop within the purgatory code in case of kexec. - Add proper handling of errors and print error messages when applying relocations - Fix duplicate tracking of irq nesting level in entry code - Let recordmcount.pl also look for jgnop mnemonic. Starting with binutils 2.37 objdump emits a jgnop mnemonic instead of brcl, which breaks mcount location detection. This is only a problem if used with compilers older than gcc 9, since with gcc 9 and newer compilers recordmcount.pl is not used anymore. - Remove preempt_disable()/preempt_enable() pair in kprobe_ftrace_handler() which was done for all architectures except for s390. - Update defconfig * tag 's390-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: recordmcount.pl: look for jgnop instruction as well as bcrl on s390 s390/entry: fix duplicate tracking of irq nesting level s390: enable switchdev support in defconfig s390/kexec: handle R_390_PLT32DBL rela in arch_kexec_apply_relocations_add() s390/ftrace: remove preempt_disable()/preempt_enable() pair s390/kexec_file: fix error handling when applying relocations s390/kexec_file: print some more error messages 15 December 2021, 18:52:01 UTC
213d9d4 Merge tag 'hyperv-fixes-signed-20211214' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fix from Wei Liu: "Build fix from Randy Dunlap" * tag 'hyperv-fixes-signed-20211214' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hv: utils: add PTP_1588_CLOCK to Kconfig to fix build 15 December 2021, 18:46:03 UTC
f4b3ee3 audit: improve robustness of the audit queue handling If the audit daemon were ever to get stuck in a stopped state the kernel's kauditd_thread() could get blocked attempting to send audit records to the userspace audit daemon. With the kernel thread blocked it is possible that the audit queue could grow unbounded as certain audit record generating events must be exempt from the queue limits else the system enter a deadlock state. This patch resolves this problem by lowering the kernel thread's socket sending timeout from MAX_SCHEDULE_TIMEOUT to HZ/10 and tweaks the kauditd_send_queue() function to better manage the various audit queues when connection problems occur between the kernel and the audit daemon. With this patch, the backlog may temporarily grow beyond the defined limits when the audit daemon is stopped and the system is under heavy audit pressure, but kauditd_thread() will continue to make progress and drain the queues as it would for other connection problems. For example, with the audit daemon put into a stopped state and the system configured to audit every syscall it was still possible to shutdown the system without a kernel panic, deadlock, etc.; granted, the system was slow to shutdown but that is to be expected given the extreme pressure of recording every syscall. The timeout value of HZ/10 was chosen primarily through experimentation and this developer's "gut feeling". There is likely no one perfect value, but as this scenario is limited in scope (root privileges would be needed to send SIGSTOP to the audit daemon), it is likely not worth exposing this as a tunable at present. This can always be done at a later date if it proves necessary. Cc: stable@vger.kernel.org Fixes: 5b52330bbfe63 ("audit: fix auditd/kernel connection state tracking") Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com> Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> 15 December 2021, 18:16:39 UTC
fac6bf8 usb: dwc2: fix STM ID/VBUS detection startup delay in dwc2_driver_probe When activate_stm_id_vb_detection is enabled, ID and Vbus detection relies on sensing comparators. This detection needs time to stabilize. A delay was already applied in dwc2_resume() when reactivating the detection, but it wasn't done in dwc2_probe(). This patch adds delay after enabling STM ID/VBUS detection. Then, ID state is good when initializing gadget and host, and avoid to get a wrong Connector ID Status Change interrupt. Fixes: a415083a11cc ("usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FS") Cc: stable <stable@vger.kernel.org> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211207124510.268841-1-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 15 December 2021, 17:43:24 UTC
f08adf5 USB: gadget: bRequestType is a bitfield, not a enum Szymon rightly pointed out that the previous check for the endpoint direction in bRequestType was not looking at only the bit involved, but rather the whole value. Normally this is ok, but for some request types, bits other than bit 8 could be set and the check for the endpoint length could not stall correctly. Fix that up by only checking the single bit. Fixes: 153a2d7e3350 ("USB: gadget: detect too-big endpoint 0 requests") Cc: Felipe Balbi <balbi@kernel.org> Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com> Link: https://lore.kernel.org/r/20211214184621.385828-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 15 December 2021, 17:40:48 UTC
a708376 soc/tegra: fuse: Fix bitwise vs. logical OR warning A new warning in clang points out two instances where boolean expressions are being used with a bitwise OR instead of logical OR: drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] reg = tegra_fuse_read_spare(i) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: note: cast one or both operands to int to silence this warning drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] reg = tegra_fuse_read_spare(i) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: note: cast one or both operands to int to silence this warning 2 warnings generated. The motivation for the warning is that logical operations short circuit while bitwise operations do not. In this instance, tegra_fuse_read_spare() is not semantically returning a boolean, it is returning a bit value. Use u32 for its return type so that it can be used with either bitwise or boolean operators without any warnings. Fixes: 25cd5a391478 ("ARM: tegra: Add speedo-based process identification") Link: https://github.com/ClangBuiltLinux/linux/issues/1488 Suggested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 15 December 2021, 16:19:06 UTC
4989d4a btrfs: fix missing blkdev_put() call in btrfs_scan_one_device() The function btrfs_scan_one_device() calls blkdev_get_by_path() and blkdev_put() to get and release its target block device. However, when btrfs_sb_log_location_bdev() fails, blkdev_put() is not called and the block device is left without clean up. This triggered failure of fstests generic/085. Fix the failure path of btrfs_sb_log_location_bdev() to call blkdev_put(). Fixes: 12659251ca5df ("btrfs: implement log-structured superblock for ZONED mode") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> 15 December 2021, 16:07:34 UTC
212a58f btrfs: fix warning when freeing leaf after subvolume creation failure When creating a subvolume, at ioctl.c:create_subvol(), if we fail to insert the root item for the new subvolume into the root tree, we can trigger the following warning: [78961.741046] WARNING: CPU: 0 PID: 4079814 at fs/btrfs/extent-tree.c:3357 btrfs_free_tree_block+0x2af/0x310 [btrfs] [78961.743344] Modules linked in: [78961.749440] dm_snapshot dm_thin_pool (...) [78961.773648] CPU: 0 PID: 4079814 Comm: fsstress Not tainted 5.16.0-rc4-btrfs-next-108 #1 [78961.775198] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [78961.777266] RIP: 0010:btrfs_free_tree_block+0x2af/0x310 [btrfs] [78961.778398] Code: 17 00 48 85 (...) [78961.781067] RSP: 0018:ffffaa4001657b28 EFLAGS: 00010202 [78961.781877] RAX: 0000000000000213 RBX: ffff897f8a796910 RCX: 0000000000000000 [78961.782780] RDX: 0000000000000000 RSI: 0000000011004000 RDI: 00000000ffffffff [78961.783764] RBP: ffff8981f490e800 R08: 0000000000000001 R09: 0000000000000000 [78961.784740] R10: 0000000000000000 R11: 0000000000000001 R12: ffff897fc963fcc8 [78961.785665] R13: 0000000000000001 R14: ffff898063548000 R15: ffff898063548000 [78961.786620] FS: 00007f31283c6b80(0000) GS:ffff8982ace00000(0000) knlGS:0000000000000000 [78961.787717] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [78961.788598] CR2: 00007f31285c3000 CR3: 000000023fcc8003 CR4: 0000000000370ef0 [78961.789568] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [78961.790585] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [78961.791684] Call Trace: [78961.792082] <TASK> [78961.792359] create_subvol+0x5d1/0x9a0 [btrfs] [78961.793054] btrfs_mksubvol+0x447/0x4c0 [btrfs] [78961.794009] ? preempt_count_add+0x49/0xa0 [78961.794705] __btrfs_ioctl_snap_create+0x123/0x190 [btrfs] [78961.795712] ? _copy_from_user+0x66/0xa0 [78961.796382] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs] [78961.797392] btrfs_ioctl+0xd1e/0x35c0 [btrfs] [78961.798172] ? __slab_free+0x10a/0x360 [78961.798820] ? rcu_read_lock_sched_held+0x12/0x60 [78961.799664] ? lock_release+0x223/0x4a0 [78961.800321] ? lock_acquired+0x19f/0x420 [78961.800992] ? rcu_read_lock_sched_held+0x12/0x60 [78961.801796] ? trace_hardirqs_on+0x1b/0xe0 [78961.802495] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [78961.803358] ? kmem_cache_free+0x321/0x3c0 [78961.804071] ? __x64_sys_ioctl+0x83/0xb0 [78961.804711] __x64_sys_ioctl+0x83/0xb0 [78961.805348] do_syscall_64+0x3b/0xc0 [78961.805969] entry_SYSCALL_64_after_hwframe+0x44/0xae [78961.806830] RIP: 0033:0x7f31284bc957 [78961.807517] Code: 3c 1c 48 f7 d8 (...) This is because we are calling btrfs_free_tree_block() on an extent buffer that is dirty. Fix that by cleaning the extent buffer, with btrfs_clean_tree_block(), before freeing it. This was triggered by test case generic/475 from fstests. Fixes: 67addf29004c5b ("btrfs: fix metadata extent leak after failure to create subvolume") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> 15 December 2021, 16:07:33 UTC
7a16360 btrfs: fix invalid delayed ref after subvolume creation failure When creating a subvolume, at ioctl.c:create_subvol(), if we fail to insert the new root's root item into the root tree, we are freeing the metadata extent we reserved for the new root to prevent a metadata extent leak, as we don't abort the transaction at that point (since there is nothing at that point that is irreversible). However we allocated the metadata extent for the new root which we are creating for the new subvolume, so its delayed reference refers to the ID of this new root. But when we free the metadata extent we pass the root of the subvolume where the new subvolume is located to btrfs_free_tree_block() - this is incorrect because this will generate a delayed reference that refers to the ID of the parent subvolume's root, and not to ID of the new root. This results in a failure when running delayed references that leads to a transaction abort and a trace like the following: [3868.738042] RIP: 0010:__btrfs_free_extent+0x709/0x950 [btrfs] [3868.739857] Code: 68 0f 85 e6 fb ff (...) [3868.742963] RSP: 0018:ffffb0e9045cf910 EFLAGS: 00010246 [3868.743908] RAX: 00000000fffffffe RBX: 00000000fffffffe RCX: 0000000000000002 [3868.745312] RDX: 00000000fffffffe RSI: 0000000000000002 RDI: ffff90b0cd793b88 [3868.746643] RBP: 000000000e5d8000 R08: 0000000000000000 R09: ffff90b0cd793b88 [3868.747979] R10: 0000000000000002 R11: 00014ded97944d68 R12: 0000000000000000 [3868.749373] R13: ffff90b09afe4a28 R14: 0000000000000000 R15: ffff90b0cd793b88 [3868.750725] FS: 00007f281c4a8b80(0000) GS:ffff90b3ada00000(0000) knlGS:0000000000000000 [3868.752275] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3868.753515] CR2: 00007f281c6a5000 CR3: 0000000108a42006 CR4: 0000000000370ee0 [3868.754869] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [3868.756228] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [3868.757803] Call Trace: [3868.758281] <TASK> [3868.758655] ? btrfs_merge_delayed_refs+0x178/0x1c0 [btrfs] [3868.759827] __btrfs_run_delayed_refs+0x2b1/0x1250 [btrfs] [3868.761047] btrfs_run_delayed_refs+0x86/0x210 [btrfs] [3868.762069] ? lock_acquired+0x19f/0x420 [3868.762829] btrfs_commit_transaction+0x69/0xb20 [btrfs] [3868.763860] ? _raw_spin_unlock+0x29/0x40 [3868.764614] ? btrfs_block_rsv_release+0x1c2/0x1e0 [btrfs] [3868.765870] create_subvol+0x1d8/0x9a0 [btrfs] [3868.766766] btrfs_mksubvol+0x447/0x4c0 [btrfs] [3868.767669] ? preempt_count_add+0x49/0xa0 [3868.768444] __btrfs_ioctl_snap_create+0x123/0x190 [btrfs] [3868.769639] ? _copy_from_user+0x66/0xa0 [3868.770391] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs] [3868.771495] btrfs_ioctl+0xd1e/0x35c0 [btrfs] [3868.772364] ? __slab_free+0x10a/0x360 [3868.773198] ? rcu_read_lock_sched_held+0x12/0x60 [3868.774121] ? lock_release+0x223/0x4a0 [3868.774863] ? lock_acquired+0x19f/0x420 [3868.775634] ? rcu_read_lock_sched_held+0x12/0x60 [3868.776530] ? trace_hardirqs_on+0x1b/0xe0 [3868.777373] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [3868.778280] ? kmem_cache_free+0x321/0x3c0 [3868.779011] ? __x64_sys_ioctl+0x83/0xb0 [3868.779718] __x64_sys_ioctl+0x83/0xb0 [3868.780387] do_syscall_64+0x3b/0xc0 [3868.781059] entry_SYSCALL_64_after_hwframe+0x44/0xae [3868.781953] RIP: 0033:0x7f281c59e957 [3868.782585] Code: 3c 1c 48 f7 d8 4c (...) [3868.785867] RSP: 002b:00007ffe1f83e2b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [3868.787198] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281c59e957 [3868.788450] RDX: 00007ffe1f83e2c0 RSI: 0000000050009418 RDI: 0000000000000003 [3868.789748] RBP: 00007ffe1f83f300 R08: 0000000000000000 R09: 00007ffe1f83fe36 [3868.791214] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000003 [3868.792468] R13: 0000000000000003 R14: 00007ffe1f83e2c0 R15: 00000000000003cc [3868.793765] </TASK> [3868.794037] irq event stamp: 0 [3868.794548] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [3868.795670] hardirqs last disabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.797086] softirqs last enabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.798309] softirqs last disabled at (0): [<0000000000000000>] 0x0 [3868.799284] ---[ end trace be24c7002fe27747 ]--- [3868.799928] BTRFS info (device dm-0): leaf 241188864 gen 1268 total ptrs 214 free space 469 owner 2 [3868.801133] BTRFS info (device dm-0): refs 2 lock_owner 225627 current 225627 [3868.802056] item 0 key (237436928 169 0) itemoff 16250 itemsize 33 [3868.802863] extent refs 1 gen 1265 flags 2 [3868.803447] ref#0: tree block backref root 1610 (...) [3869.064354] item 114 key (241008640 169 0) itemoff 12488 itemsize 33 [3869.065421] extent refs 1 gen 1268 flags 2 [3869.066115] ref#0: tree block backref root 1689 (...) [3869.403834] BTRFS error (device dm-0): unable to find ref byte nr 241008640 parent 0 root 1622 owner 0 offset 0 [3869.405641] BTRFS: error (device dm-0) in __btrfs_free_extent:3076: errno=-2 No such entry [3869.407138] BTRFS: error (device dm-0) in btrfs_run_delayed_refs:2159: errno=-2 No such entry Fix this by passing the new subvolume's root ID to btrfs_free_tree_block(). This requires changing the root argument of btrfs_free_tree_block() from struct btrfs_root * to a u64, since at this point during the subvolume creation we have not yet created the struct btrfs_root for the new subvolume, and btrfs_free_tree_block() only needs a root ID and nothing else from a struct btrfs_root. This was triggered by test case generic/475 from fstests. Fixes: 67addf29004c5b ("btrfs: fix metadata extent leak after failure to create subvolume") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> 15 December 2021, 16:07:33 UTC
back to top