https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
672c0c5 Linux 5.18-rc5 01 May 2022, 20:57:58 UTC
b6b2648 Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "ARM: - Take care of faults occuring between the PARange and IPA range by injecting an exception - Fix S2 faults taken from a host EL0 in protected mode - Work around Oops caused by a PMU access from a 32bit guest when PMU has been created. This is a temporary bodge until we fix it for good. x86: - Fix potential races when walking host page table - Fix shadow page table leak when KVM runs nested - Work around bug in userspace when KVM synthesizes leaf 0x80000021 on older (pre-EPYC) or Intel processors Generic (but affects only RISC-V): - Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: work around QEMU issue with synthetic CPUID leaves Revert "x86/mm: Introduce lookup_address_in_mm()" KVM: x86/mmu: fix potential races when walking host page table KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENT KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR KVM: arm64: Inject exception on out-of-IPA-range translation fault KVM/arm64: Don't emulate a PMU for 32-bit guests if feature not set KVM: arm64: Handle host stage-2 faults from 32-bit EL0 01 May 2022, 18:49:32 UTC
b2da7df Merge tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - A fix to disable PCI/MSI[-X] masking for XEN_HVM guests as that is solely controlled by the hypervisor - A build fix to make the function prototype (__warn()) as visible as the definition itself - A bunch of objtool annotation fixes which have accumulated over time - An ORC unwinder fix to handle bad input gracefully - Well, we thought the microcode gets loaded in time in order to restore the microcode-emulated MSRs but we thought wrong. So there's a fix for that to have the ordering done properly - Add new Intel model numbers - A spelling fix * tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests bug: Have __warn() prototype defined unconditionally x86/Kconfig: fix the spelling of 'becoming' in X86_KERNEL_IBT config objtool: Use offstr() to print address of missing ENDBR objtool: Print data address for "!ENDBR" data warnings x86/xen: Add ANNOTATE_NOENDBR to startup_xen() x86/uaccess: Add ENDBR to __put_user_nocheck*() x86/retpoline: Add ANNOTATE_NOENDBR for retpolines x86/static_call: Add ANNOTATE_NOENDBR to static call trampoline objtool: Enable unreachable warnings for CLANG LTO x86,objtool: Explicitly mark idtentry_body()s tail REACHABLE x86,objtool: Mark cpu_startup_entry() __noreturn x86,xen,objtool: Add UNWIND hint lib/strn*,objtool: Enforce user_access_begin() rules MAINTAINERS: Add x86 unwinding entry x86/unwind/orc: Recheck address range after stack info was updated x86/cpu: Load microcode during restore_processor_state() x86/cpu: Add new Alderlake and Raptorlake CPU model numbers 01 May 2022, 17:03:36 UTC
b70ed23 Merge tag 'objtool_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Borislav Petkov: "A bunch of objtool fixes to improve unwinding, sibling call detection, fallthrough detection and relocation handling of weak symbols when the toolchain strips section symbols" * tag 'objtool_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix code relocs vs weak symbols objtool: Fix type of reloc::addend objtool: Fix function fallthrough detection for vmlinux objtool: Fix sibling call detection in alternatives objtool: Don't set 'jump_dest' for sibling calls x86/uaccess: Don't jump between functions 01 May 2022, 16:34:54 UTC
d4af0c1 Merge tag 'irq_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Borislav Petkov: - Fix locking when accessing device MSI descriptors * tag 'irq_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: bus: fsl-mc-msi: Fix MSI descriptor mutex lock for msi_first_desc() 01 May 2022, 16:30:47 UTC
57ae8a4 Merge tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some small driver core and kernfs fixes for some reported problems. They include: - kernfs regression that is causing oopses in 5.17 and newer releases - topology sysfs fixes for a few small reported problems. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kernfs: fix NULL dereferencing in kernfs_remove topology: Fix up build warning in topology_is_visible() arch_topology: Do not set llc_sibling if llc_id is invalid topology: make core_mask include at least cluster_siblings topology/sysfs: Hide PPIN on systems that do not support it. 30 April 2022, 17:24:21 UTC
e2e5ebe Merge tag 'char-misc-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a small number of char/misc/other driver fixes for 5.18-rc5 Nothing major in here, this is mostly IIO driver fixes along with some other small things: - at25 driver fix for systems without a dma-able stack - phy driver fixes for reported issues - binder driver fixes for reported issues All of these have been in linux-next without any reported problems" * tag 'char-misc-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (31 commits) eeprom: at25: Use DMA safe buffers binder: Gracefully handle BINDER_TYPE_FDA objects with num_fds=0 binder: Address corner cases in deferred copy and fixup phy: amlogic: fix error path in phy_g12a_usb3_pcie_probe() iio: imu: inv_icm42600: Fix I2C init possible nack iio: dac: ltc2688: fix voltage scale read interconnect: qcom: sdx55: Drop IP0 interconnects interconnect: qcom: sc7180: Drop IP0 interconnects phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks bus: mhi: host: pci_generic: Flush recovery worker during freeze bus: mhi: host: pci_generic: Add missing poweroff() PM callback phy: ti: tusb1210: Fix an error handling path in tusb1210_probe() phy: samsung: exynos5250-sata: fix missing device put in probe error paths phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe phy: ti: Fix missing of_node_put in ti_pipe3_get_sysctrl() phy: ti: tusb1210: Make tusb1210_chg_det_states static iio:dac:ad3552r: Fix an IS_ERR() vs NULL check iio: sx9324: Fix default precharge internal resistance register ... 30 April 2022, 17:15:57 UTC
a6b5c5d Merge tag 'tty-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small serial driver fixes, and a larger number of GSM line discipline fixes for 5.18-rc5. These include: - lots of tiny n_gsm fixes for issues to resolve a number of reported problems. Seems that people are starting to actually use this code again. - 8250 driver fixes for some devices - imx serial driver fix - amba-pl011 driver fix All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (27 commits) tty: n_gsm: fix sometimes uninitialized warning in gsm_dlci_modem_output() serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device serial: 8250: Also set sticky MCR bits in console restoration tty: n_gsm: fix software flow control handling tty: n_gsm: fix invalid use of MSC in advanced option tty: n_gsm: fix broken virtual tty handling Revert "serial: sc16is7xx: Clear RS485 bits in the shutdown" tty: n_gsm: fix missing update of modem controls after DLCI open serial: 8250: Fix runtime PM for start_tx() for empty buffer serial: imx: fix overrun interrupts in DMA mode serial: amba-pl011: do not time out prematurely when draining tx fifo tty: n_gsm: fix incorrect UA handling tty: n_gsm: fix reset fifo race condition tty: n_gsm: fix missing tty wakeup in convergence layer type 2 tty: n_gsm: fix wrong signal octets encoding in MSC tty: n_gsm: fix wrong command frame length field encoding tty: n_gsm: fix wrong command retry handling tty: n_gsm: fix missing explicit ldisc flush tty: n_gsm: fix wrong DLCI release order tty: n_gsm: fix insufficient txframe size ... 30 April 2022, 17:09:14 UTC
da1b404 Merge tag 'usb-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 5.18-rc5 for some reported issues and new quirks. They include: - dwc3 driver fixes - xhci driver fixes - typec driver fixes - new usb-serial driver ids - added new USB devices to existing quirk tables - other tiny fixes All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits) usb: phy: generic: Get the vbus supply usb: dwc3: gadget: Return proper request status usb: dwc3: pci: add support for the Intel Meteor Lake-P usb: dwc3: core: Only handle soft-reset in DCTL usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind() usb: misc: eud: Fix an error handling path in eud_probe() usb: core: Don't hold the device lock while sleeping in do_proc_control() usb: dwc3: Try usb-role-switch first in dwc3_drd_init usb: dwc3: core: Fix tx/rx threshold settings usb: mtu3: fix USB 3.0 dual-role-switch from device to host xhci: Enable runtime PM on second Alderlake controller usb: dwc3: fix backwards compat with rockchip devices dt-bindings: usb: samsung,exynos-usb2: add missing required reg usb: misc: fix improper handling of refcount in uss720_probe() USB: Fix ehci infinite suspend-resume loop issue in zhaoxin usb: typec: tcpm: Fix undefined behavior due to shift overflowing the constant usb: typec: rt1719: Fix build error without CONFIG_POWER_SUPPLY usb: typec: ucsi: Fix role swapping usb: typec: ucsi: Fix reuse of completion structure usb: xhci: tegra:Fix PM usage reference leak of tegra_xusb_unpowergate_partitions ... 30 April 2022, 16:58:46 UTC
e9512f3 Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One fix for an endless error loop with the target driver affecting tapes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: pscsi: Set SCF_TREAT_READ_AS_NORMAL flag only if there is valid data 30 April 2022, 16:47:59 UTC
8013d1d Merge tag 'soc-fixes-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: - A fix for a regression caused by the previous set of bugfixes changing tegra and at91 pinctrl properties. More work is needed to figure out what this should actually be, but a revert makes it work for the moment. - Defconfig regression fixes for tegra after renamed symbols - Build-time warning and static checker fixes for imx, op-tee, sunxi, meson, at91, and omap - More at91 DT fixes for audio, regulator and spi nodes - A regression fix for Renesas Hyperflash memory probe - A stability fix for amlogic boards, modifying the allowed cpufreq states - Multiple fixes for system suspend on omap2+ - DT fixes for various i.MX bugs - A probe error fix for imx6ull-colibri MMC - A MAINTAINERS file entry for samsung bug reports * tag 'soc-fixes-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits) Revert "arm: dts: at91: Fix boolean properties with values" bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create() Revert "arm64: dts: tegra: Fix boolean properties with values" arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock ARM: dts: imx6ull-colibri: fix vqmmc regulator MAINTAINERS: add Bug entry for Samsung and memory controller drivers memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35 ARM: dts: am3517-evm: Fix misc pinmuxing ARM: dts: am33xx-l4: Add missing touchscreen clock properties ARM: dts: Fix mmc order for omap3-gta04 ARM: dts: at91: fix pinctrl phandles ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name ARM: dts: at91: Describe regulators on at91sam9g20ek ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek ARM: dts: at91: Fix boolean properties with values ARM: dts: at91: use generic node name for dataflash ARM: dts: at91: align SPI NOR node name with dtschema ARM: dts: at91: sama7g5ek: Align the impedance of the QSPI0's HSIO and PCB lines ARM: dts: at91: sama7g5ek: enable pull-up on flexcom3 console lines ... 29 April 2022, 22:51:05 UTC
c0e6265 Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A semi-large pile of clk driver fixes this time around. Nothing is touching the core so these fixes are fairly well contained to specific devices that use these clk drivers. - Some Allwinner SoC fixes to gracefully handle errors and mark an RTC clk as critical so that the RTC keeps ticking. - Fix AXI bus clks and RTC clk design for Microchip PolarFire SoC driver introduced this cycle. This has some devicetree bits acked by riscv maintainers. We're fixing it now so that the prior bindings aren't released in a major kernel version. - Remove a reset on Microchip PolarFire SoCs that broke when enabling CONFIG_PM. - Set a min/max for the Qualcomm graphics clk. This got broken by the clk rate range patches introduced this cycle" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource() clk: sunxi-ng: sun6i-rtc: Mark rtc-32k as critical riscv: dts: microchip: reparent mpfs clocks clk: microchip: mpfs: add RTCREF clock control clk: microchip: mpfs: re-parent the configurable clocks dt-bindings: rtc: add refclk to mpfs-rtc dt-bindings: clk: mpfs: add defines for two new clocks dt-bindings: clk: mpfs document msspll dri registers riscv: dts: microchip: fix usage of fic clocks on mpfs clk: microchip: mpfs: mark CLK_ATHENA as critical clk: microchip: mpfs: fix parents for FIC clocks clk: qcom: clk-rcg2: fix gfx3d frequency calculation clk: microchip: mpfs: don't reset disabled peripherals clk: sunxi-ng: fix not NULL terminated coccicheck error 29 April 2022, 22:38:23 UTC
bd3d3ad Merge tag 'block-5.18-2022-04-29' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: - Revert of a patch that caused timestamp issues (Tejun) - iocost warning fix (Tejun) - bfq warning fix (Jan) * tag 'block-5.18-2022-04-29' of git://git.kernel.dk/linux-block: bfq: Fix warning in bfqq_request_over_limit() Revert "block: inherit request start time from bio for BLK_CGROUP" iocost: don't reset the inuse weight of under-weighted debtors 29 April 2022, 22:28:42 UTC
63b7b3e Merge tag 'io_uring-5.18-2022-04-29' of git://git.kernel.dk/linux-block Pull io_uring fixes from Jens Axboe: "Pretty boring: - three patches just adding reserved field checks (me, Eugene) - Fixing a potential regression with IOPOLL caused by a block change (Joseph)" Boring is good. * tag 'io_uring-5.18-2022-04-29' of git://git.kernel.dk/linux-block: io_uring: check that data field is 0 in ringfd unregister io_uring: fix uninitialized field in rw io_kiocb io_uring: check reserved fields for recv/recvmsg io_uring: check reserved fields for send/sendmsg 29 April 2022, 21:51:57 UTC
bdda830 Merge tag 'random-5.18-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator fixes from Jason Donenfeld: - Eric noticed that the memmove() in crng_fast_key_erasure() was bogus, so this has been changed to a memcpy() and the confusing situation clarified with a detailed comment. - [Half]SipHash documentation updates from Bagas and Eric, after Eric pointed out that the use of HalfSipHash in random.c made a bit of the text potentially misleading. * tag 'random-5.18-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: Documentation: siphash: disambiguate HalfSipHash algorithm from hsiphash functions Documentation: siphash: enclose HalfSipHash usage example in the literal block Documentation: siphash: convert danger note to warning for HalfSipHash random: document crng_fast_key_erasure() destination possibility 29 April 2022, 21:47:17 UTC
bd383b8 Merge tag 'ceph-for-5.18-rc5' of https://github.com/ceph/ceph-client Pull ceph client fixes from Ilya Dryomov: "A fix for a NULL dereference that turns out to be easily triggerable by fsync (marked for stable) and a false positive WARN and snap_rwsem locking fixups" * tag 'ceph-for-5.18-rc5' of https://github.com/ceph/ceph-client: ceph: fix possible NULL pointer dereference for req->r_session ceph: remove incorrect session state check ceph: get snap_rwsem read lock in handle_cap_export for ceph_add_cap libceph: disambiguate cluster/pool full log message 29 April 2022, 21:37:35 UTC
adee8aa Revert "arm: dts: at91: Fix boolean properties with values" This reverts commit 0dc23d1a8e17, which caused another regression as the pinctrl code actually expects an integer value of 0 or 1 rather than a simple boolean property. Signed-off-by: Arnd Bergmann <arnd@arndb.de> 29 April 2022, 21:09:49 UTC
f751d8e KVM: x86: work around QEMU issue with synthetic CPUID leaves Synthesizing AMD leaves up to 0x80000021 caused problems with QEMU, which assumes the *host* CPUID[0x80000000].EAX is higher or equal to what KVM_GET_SUPPORTED_CPUID reports. This causes QEMU to issue bogus host CPUIDs when preparing the input to KVM_SET_CPUID2. It can even get into an infinite loop, which is only terminated by an abort(): cpuid_data is full, no space for cpuid(eax:0x8000001d,ecx:0x3e) To work around this, only synthesize those leaves if 0x8000001d exists on the host. The synthetic 0x80000021 leaf is mostly useful on Zen2, which satisfies the condition. Fixes: f144c49e8c39 ("KVM: x86: synthesize CPUID leaf 0x80000021h if useful") Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 29 April 2022, 19:24:58 UTC
3e71713 Merge tag 'perf-tools-fixes-for-v5.18-2022-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix Intel PT (Processor Trace) timeless decoding with perf.data directory. - ARM SPE (Statistical Profiling Extensions) address fixes, for synthesized events and for SPE events with physical addresses. Add a simple 'perf test' entry to make sure this doesn't regress. - Remove arch specific processing of kallsyms data to fixup symbol end address, fixing excessive memory consumption in the annotation code. * tag 'perf-tools-fixes-for-v5.18-2022-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf symbol: Remove arch__symbols__fixup_end() perf symbol: Update symbols__fixup_end() perf symbol: Pass is_kallsyms to symbols__fixup_end() perf test: Add perf_event_attr test for Arm SPE perf arm-spe: Fix SPE events with phys addresses perf arm-spe: Fix addresses of synthesized SPE events perf intel-pt: Fix timeless decoding with perf.data directory 29 April 2022, 18:34:07 UTC
2d0de93 Merge tag 'riscv-for-linus-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A fix to properly ensure a single CPU is running during patch_text(). - A defconfig update to include RPMSG_CTRL when RPMSG_CHAR was set, necessary after a recent refactoring. * tag 'riscv-for-linus-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: configs: Configs that had RPMSG_CHAR now get RPMSG_CTRL riscv: patch_text: Fixup last cpu should be master 29 April 2022, 17:44:58 UTC
66c2112 Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Will Deacon: "Rename and reallocate the PT_ARM_MEMTAG_MTE ELF segment type. This is a fix to the MTE ELF ABI for a bug that was added during the most recent merge window as part of the coredump support. The issue is that the value assigned to the new PT_ARM_MEMTAG_MTE segment type has already been allocated to PT_AARCH64_UNWIND by the ELF ABI, so we've bumped the value and changed the name of the identifier to be better aligned with the existing one" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: elf: Fix the arm64 MTE ELF segment name and value 29 April 2022, 17:36:47 UTC
643d95a Revert "x86/mm: Introduce lookup_address_in_mm()" Drop lookup_address_in_mm() now that KVM is providing it's own variant of lookup_address_in_pgd() that is safe for use with user addresses, e.g. guards against page tables being torn down. A variant that provides a non-init mm is inherently dangerous and flawed, as the only reason to use an mm other than init_mm is to walk a userspace mapping, and lookup_address_in_pgd() does not play nice with userspace mappings, e.g. doesn't disable IRQs to block TLB shootdowns and doesn't use READ_ONCE() to ensure an upper level entry isn't converted to a huge page between checking the PAGE_SIZE bit and grabbing the address of the next level down. This reverts commit 13c72c060f1ba6f4eddd7b1c4f52a8aded43d6d9. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <YmwIi3bXr/1yhYV/@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 29 April 2022, 16:40:41 UTC
73331c5 Merge branch 'kvm-fixes-for-5.18-rc5' into HEAD Fixes for (relatively) old bugs, to be merged in both the -rc and next development trees: * Fix potential races when walking host page table * Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT * Fix shadow page table leak when KVM runs nested 29 April 2022, 16:39:34 UTC
4418723 KVM: x86/mmu: fix potential races when walking host page table KVM uses lookup_address_in_mm() to detect the hugepage size that the host uses to map a pfn. The function suffers from several issues: - no usage of READ_ONCE(*). This allows multiple dereference of the same page table entry. The TOCTOU problem because of that may cause KVM to incorrectly treat a newly generated leaf entry as a nonleaf one, and dereference the content by using its pfn value. - the information returned does not match what KVM needs; for non-present entries it returns the level at which the walk was terminated, as long as the entry is not 'none'. KVM needs level information of only 'present' entries, otherwise it may regard a non-present PXE entry as a present large page mapping. - the function is not safe for mappings that can be torn down, because it does not disable IRQs and because it returns a PTE pointer which is never safe to dereference after the function returns. So implement the logic for walking host page tables directly in KVM, and stop using lookup_address_in_mm(). Cc: Sean Christopherson <seanjc@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Mingwei Zhang <mizhang@google.com> Message-Id: <20220429031757.2042406-1-mizhang@google.com> [Inline in host_pfn_mapping_level, ensure no semantic change for its callers. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 29 April 2022, 16:38:22 UTC
d495f94 KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENT When KVM_EXIT_SYSTEM_EVENT was introduced, it included a flags member that at the time was unused. Unfortunately this extensibility mechanism has several issues: - x86 is not writing the member, so it would not be possible to use it on x86 except for new events - the member is not aligned to 64 bits, so the definition of the uAPI struct is incorrect for 32- on 64-bit userspace. This is a problem for RISC-V, which supports CONFIG_KVM_COMPAT, but fortunately usage of flags was only introduced in 5.18. Since padding has to be introduced, place a new field in there that tells if the flags field is valid. To allow further extensibility, in fact, change flags to an array of 16 values, and store how many of the values are valid. The availability of the new ndata field is tied to a system capability; all architectures are changed to fill in the field. To avoid breaking compilation of userspace that was using the flags field, provide a userspace-only union to overlap flags with data[0]. The new field is placed at the same offset for both 32- and 64-bit userspace. Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Peter Gonda <pgonda@google.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Message-Id: <20220422103013.34832-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 29 April 2022, 16:38:22 UTC
86931ff KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR Disallow memslots and MMIO SPTEs whose gpa range would exceed the host's MAXPHYADDR, i.e. don't create SPTEs for gfns that exceed host.MAXPHYADDR. The TDP MMU bounds its zapping based on host.MAXPHYADDR, and so if the guest, possibly with help from userspace, manages to coerce KVM into creating a SPTE for an "impossible" gfn, KVM will leak the associated shadow pages (page tables): WARNING: CPU: 10 PID: 1122 at arch/x86/kvm/mmu/tdp_mmu.c:57 kvm_mmu_uninit_tdp_mmu+0x4b/0x60 [kvm] Modules linked in: kvm_intel kvm irqbypass CPU: 10 PID: 1122 Comm: set_memory_regi Tainted: G W 5.18.0-rc1+ #293 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_mmu_uninit_tdp_mmu+0x4b/0x60 [kvm] Call Trace: <TASK> kvm_arch_destroy_vm+0x130/0x1b0 [kvm] kvm_destroy_vm+0x162/0x2d0 [kvm] kvm_vm_release+0x1d/0x30 [kvm] __fput+0x82/0x240 task_work_run+0x5b/0x90 exit_to_user_mode_prepare+0xd2/0xe0 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> On bare metal, encountering an impossible gpa in the page fault path is well and truly impossible, barring CPU bugs, as the CPU will signal #PF during the gva=>gpa translation (or a similar failure when stuffing a physical address into e.g. the VMCS/VMCB). But if KVM is running as a VM itself, the MAXPHYADDR enumerated to KVM may not be the actual MAXPHYADDR of the underlying hardware, in which case the hardware will not fault on the illegal-from-KVM's-perspective gpa. Alternatively, KVM could continue allowing the dodgy behavior and simply zap the max possible range. But, for hosts with MAXPHYADDR < 52, that's a (minor) waste of cycles, and more importantly, KVM can't reasonably support impossible memslots when running on bare metal (or with an accurate MAXPHYADDR as a VM). Note, limiting the overhead by checking if KVM is running as a guest is not a safe option as the host isn't required to announce itself to the guest in any way, e.g. doesn't need to set the HYPERVISOR CPUID bit. A second alternative to disallowing the memslot behavior would be to disallow creating a VM with guest.MAXPHYADDR > host.MAXPHYADDR. That restriction is undesirable as there are legitimate use cases for doing so, e.g. using the highest host.MAXPHYADDR out of a pool of heterogeneous systems so that VMs can be migrated between hosts with different MAXPHYADDRs without running afoul of the allow_smaller_maxphyaddr mess. Note that any guest.MAXPHYADDR is valid with shadow paging, and it is even useful in order to test KVM with MAXPHYADDR=52 (i.e. without any reserved physical address bits). The now common kvm_mmu_max_gfn() is inclusive instead of exclusive. The memslot and TDP MMU code want an exclusive value, but the name implies the returned value is inclusive, and the MMIO path needs an inclusive check. Fixes: faaf05b00aec ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU") Fixes: 524a1e4e381f ("KVM: x86/mmu: Don't leak non-leaf SPTEs when zapping all SPTEs") Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Cc: Ben Gardon <bgardon@google.com> Cc: David Matlack <dmatlack@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220428233416.2446833-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 29 April 2022, 16:38:21 UTC
484c22d Merge tag 'kvmarm-fixes-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.18, take #2 - Take care of faults occuring between the PARange and IPA range by injecting an exception - Fix S2 faults taken from a host EL0 in protected mode - Work around Oops caused by a PMU access from a 32bit guest when PMU has been created. This is a temporary bodge until we fix it for good. 29 April 2022, 16:32:14 UTC
310b663 Merge tag 'tegra-for-5.18-arm-defconfig-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes ARM: tegra: Default configuration fixes for v5.18 This contains two updates to the default configuration needed because of a Kconfig symbol name change. This fixes a failure that was detected in the NVIDIA automated test farm. * tag 'tegra-for-5.18-arm-defconfig-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: config: multi v7: Enable NVIDIA Tegra video decoder driver ARM: tegra_defconfig: Update CONFIG_TEGRA_VDE option Link: https://lore.kernel.org/r/20220429080626.494150-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 29 April 2022, 14:41:22 UTC
303cc74 io_uring: check that data field is 0 in ringfd unregister Only allow data field to be 0 in struct io_uring_rsrc_update user arguments to allow for future possible usage. Fixes: e7a6c00dc77a ("io_uring: add support for registering ring file descriptors") Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com> Link: https://lore.kernel.org/r/20220429142218.GA28696@asgard.redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 29 April 2022, 14:39:43 UTC
73c7bcd Merge tag 'imx-fixes-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.18, 2nd round: - Fix one sparse warning on imx-weim driver. - Fix vqmmc regulator to get UHS-I mode work on imx6ull-colibri board. - Add missing 32.768 kHz PMIC clock for imx8mn-ddr4-evk board to fix bd718xx-clk probe error. * tag 'imx-fixes-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock ARM: dts: imx6ull-colibri: fix vqmmc regulator bus: imx-weim: make symbol 'weim_of_notifier' static Link: https://lore.kernel.org/r/20220426013427.GB14615@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de> 29 April 2022, 14:23:31 UTC
c755ad9 Merge tag 'sunxi-fixes-for-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Fix return value in RSB bus driver * tag 'sunxi-fixes-for-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create() Link: https://lore.kernel.org/r/Ymbkd+/dDmRJz66w@kista.localdomain Signed-off-by: Arnd Bergmann <arnd@arndb.de> 29 April 2022, 14:23:02 UTC
09df6a7 bfq: Fix warning in bfqq_request_over_limit() People are occasionally reporting a warning bfqq_request_over_limit() triggering reporting that BFQ's idea of cgroup hierarchy (and its depth) does not match what generic blkcg code thinks. This can actually happen when bfqq gets moved between BFQ groups while bfqq_request_over_limit() is running. Make sure the code is safe against BFQ queue being moved to a different BFQ group. Fixes: 76f1df88bbc2 ("bfq: Limit number of requests consumed by each cgroup") CC: stable@vger.kernel.org Link: https://lore.kernel.org/all/CAJCQCtTw_2C7ZSz7as5Gvq=OmnDiio=HRkQekqWpKot84sQhFA@mail.gmail.com/ Reported-by: Chris Murphy <lists@colorremedies.com> Reported-by: "yukuai (C)" <yukuai3@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220407140738.9723-1-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk> 29 April 2022, 12:45:37 UTC
7e0815b x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests When a XEN_HVM guest uses the XEN PIRQ/Eventchannel mechanism, then PCI/MSI[-X] masking is solely controlled by the hypervisor, but contrary to XEN_PV guests this does not disable PCI/MSI[-X] masking in the PCI/MSI layer. This can lead to a situation where the PCI/MSI layer masks an MSI[-X] interrupt and the hypervisor grants the write despite the fact that it already requested the interrupt. As a consequence interrupt delivery on the affected device is not happening ever. Set pci_msi_ignore_mask to prevent that like it's done for XEN_PV guests already. Fixes: 809f9267bbab ("xen: map MSIs into pirqs") Reported-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com> Reported-by: Dusty Mabe <dustymabe@redhat.com> Reported-by: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Noah Meyerhans <noahm@debian.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87tuaduxj5.ffs@tglx 29 April 2022, 12:37:39 UTC
38d741c Merge tag 'drm-fixes-2022-04-29' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Another relatively quiet week, amdgpu leads the way, some i915 display fixes, and a single sunxi fix. amdgpu: - Runtime pm fix - DCN memory leak fix in error path - SI DPM deadlock fix - S0ix fix amdkfd: - GWS fix - GWS support for CRIU i915: - Fix #5284: Backlight control regression on XMG Core 15 e21 - Fix black display plane on Acer One AO532h - Two smaller display fixes sunxi: - Single fix removing applying PHYS_OFFSET twice" * tag 'drm-fixes-2022-04-29' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: keep mmhub clock gating being enabled during s2idle suspend drm/amd/pm: fix the deadlock issue observed on SI drm/amd/display: Fix memory leak in dcn21_clock_source_create drm/amdgpu: don't runtime suspend if there are displays attached (v3) drm/amdkfd: CRIU add support for GWS queues drm/amdkfd: Fix GWS queue count drm/sun4i: Remove obsolete references to PHYS_OFFSET drm/i915/fbc: Consult hw.crtc instead of uapi.crtc drm/i915: Fix SEL_FETCH_PLANE_*(PIPE_B+) register addresses drm/i915: Check EDID for HDR static metadata when choosing blc drm/i915: Fix DISP_POS_Y and DISP_HEIGHT defines 29 April 2022, 01:00:34 UTC
9d9f720 Merge tag 'amd-drm-fixes-5.18-2022-04-27' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.18-2022-04-27: amdgpu: - Runtime pm fix - DCN memory leak fix in error path - SI DPM deadlock fix - S0ix fix amdkfd: - GWS fix - GWS support for CRIU Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220428023232.5794-1-alexander.deucher@amd.com 29 April 2022, 00:27:05 UTC
22c73ba Merge tag 'drm-intel-fixes-2022-04-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix #5284: Backlight control regression on XMG Core 15 e21 - Fix black display plane on Acer One AO532h - Two smaller display fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Ymotel5VfZUrJahf@jlahtine-mobl.ger.corp.intel.com 29 April 2022, 00:18:18 UTC
43f2c10 Merge tag 'drm-misc-fixes-2022-04-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.18-rc5: - Single fix removing applying PHYS_OFFSET twice in sunxi. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f692bb62-5620-1868-91b7-dffb8d6f9175@linux.intel.com 29 April 2022, 00:02:09 UTC
249aca0 Merge tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, bpf and netfilter. Current release - new code bugs: - bridge: switchdev: check br_vlan_group() return value - use this_cpu_inc() to increment net->core_stats, fix preempt-rt Previous releases - regressions: - eth: stmmac: fix write to sgmii_adapter_base Previous releases - always broken: - netfilter: nf_conntrack_tcp: re-init for syn packets only, resolving issues with TCP fastopen - tcp: md5: fix incorrect tcp_header_len for incoming connections - tcp: fix F-RTO may not work correctly when receiving DSACK - tcp: ensure use of most recently sent skb when filling rate samples - tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT - virtio_net: fix wrong buf address calculation when using xdp - xsk: fix forwarding when combining copy mode with busy poll - xsk: fix possible crash when multiple sockets are created - bpf: lwt: fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook - sctp: null-check asoc strreset_chunk in sctp_generate_reconf_event - wireguard: device: check for metadata_dst with skb_valid_dst() - netfilter: update ip6_route_me_harder to consider L3 domain - gre: make o_seqno start from 0 in native mode - gre: switch o_seqno to atomic to prevent races in collect_md mode Misc: - add Eric Dumazet to networking maintainers - dt: dsa: realtek: remove realtek,rtl8367s string - netfilter: flowtable: Remove the empty file" * tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits) tcp: fix F-RTO may not work correctly when receiving DSACK Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits" net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK ixgbe: ensure IPsec VF<->PF compatibility MAINTAINERS: Update BNXT entry with firmware files netfilter: nft_socket: only do sk lookups when indev is available net: fec: add missing of_node_put() in fec_enet_init_stop_mode() bnx2x: fix napi API usage sequence tls: Skip tls_append_frag on zero copy size Add Eric Dumazet to networking maintainers netfilter: conntrack: fix udp offload timeout sysctl netfilter: nf_conntrack_tcp: re-init for syn packets only net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK net: Use this_cpu_inc() to increment net->core_stats Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted Bluetooth: hci_event: Fix creating hci_conn object on error status Bluetooth: hci_event: Fix checking for invalid handle on error status ice: fix use-after-free when deinitializing mailbox snapshot ice: wait 5 s for EMP reset after firmware flash ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg() ... 28 April 2022, 19:34:50 UTC
32452a3 io_uring: fix uninitialized field in rw io_kiocb io_rw_init_file does not initialize kiocb->private, so when iocb_bio_iopoll reads kiocb->private it can contain uninitialized data. Fixes: 3e08773c3841 ("block: switch polling to be bio based") Signed-off-by: Joseph Ravichandran <jravi@mit.edu> Signed-off-by: Jens Axboe <axboe@kernel.dk> 28 April 2022, 19:13:43 UTC
3c76fe7 Merge tag 'thermal-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "These take back recent chages that started to confuse users and fix up an attr.show callback prototype in a driver. Specifics: - Stop warning about deprecation of the userspace thermal governor and cooling device status interface, because there are cases in which user space has to drive thermal management with the help of them (Daniel Lezcano) - Fix attr.show callback prototype in the int340x thermal driver (Kees Cook)" * tag 'thermal-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/governor: Remove deprecated information Revert "thermal/core: Deprecate changing cooling device state from userspace" thermal: int340x: Fix attr.show callback prototype 28 April 2022, 18:57:00 UTC
659ed6e Merge tag 'pm-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix up recent intel_idle driver changes and fix some ARM cpufreq driver issues. Specifics: - Fix issues with the Qualcomm's cpufreq driver (Dmitry Baryshkov, Vladimir Zapolskiy). - Fix memory leak with the Sun501 driver (Xiaobing Luo). - Make intel_idle enable C1E promotion on all CPUs when C1E is preferred to C1 (Artem Bityutskiy). - Make C6 optimization on Sapphire Rapids added recently work as expected if both C1E and C1 are "preferred" (Artem Bityutskiy)" * tag 'pm-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_idle: Fix SPR C6 optimization intel_idle: Fix the 'preferred_cstates' module parameter cpufreq: qcom-cpufreq-hw: Clear dcvs interrupts cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platforms cpufreq: qcom-hw: provide online/offline operations cpufreq: qcom-hw: fix the opp entries refcounting cpufreq: qcom-hw: fix the race between LMH worker and cpuhp cpufreq: qcom-hw: drop affinity hint before freeing the IRQ 28 April 2022, 18:50:21 UTC
f12d31c Merge tag 'acpi-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael WysockiL "These fix up the ACPI processor driver after a change made during the 5.16 cycle that inadvertently broke falling back to shallower C-states when C3 cannot be used. Specifics: - Make the ACPI processor driver avoid falling back to C3 type of C-states when C3 cannot be requested (Ville Syrjälä) - Revert a quirk that is not necessary any more after fixing the underlying issue properly (Ville Syrjälä)" * tag 'acpi-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40" ACPI: processor: idle: Avoid falling back to C3 type C-states 28 April 2022, 18:37:20 UTC
259b897 Merge tag 'platform-drivers-x86-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Highlights: - asus-wmi bug-fixes - intel-sdsu bug-fixes - build (warning) fixes - couple of hw-id additions" * tag 'platform-drivers-x86-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/intel: pmc/core: change pmc_lpm_modes to static platform/x86/intel/sdsi: Fix bug in multi packet reads platform/x86/intel/sdsi: Poll on ready bit for writes platform/x86/intel/sdsi: Handle leaky bucket platform/x86: intel-uncore-freq: Prevent driver loading in guests platform/x86: gigabyte-wmi: added support for B660 GAMING X DDR4 motherboard platform/x86: dell-laptop: Add quirk entry for Latitude 7520 platform/x86: asus-wmi: Fix driver not binding when fan curve control probe fails platform/x86: asus-wmi: Potential buffer overflow in asus_wmi_evaluate_method_buf() tools/power/x86/intel-speed-select: fix build failure when using -Wl,--as-needed 28 April 2022, 18:13:00 UTC
fd5a4c7 Merge tag 'regulator-fix-v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "A minor fix for the DT binding documentation of the rt5190a driver" * tag 'regulator-fix-v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: dt-bindings: Revise the rt5190a buck/ldo description 28 April 2022, 18:07:49 UTC
d9157f6 tcp: fix F-RTO may not work correctly when receiving DSACK Currently DSACK is regarded as a dupack, which may cause F-RTO to incorrectly enter "loss was real" when receiving DSACK. Packetdrill to demonstrate: // Enable F-RTO and TLP 0 `sysctl -q net.ipv4.tcp_frto=2` 0 `sysctl -q net.ipv4.tcp_early_retrans=3` 0 `sysctl -q net.ipv4.tcp_congestion_control=cubic` // Establish a connection +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 // RTT 10ms, RTO 210ms +.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.01 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 // Send 2 data segments +0 write(4, ..., 2000) = 2000 +0 > P. 1:2001(2000) ack 1 // TLP +.022 > P. 1001:2001(1000) ack 1 // Continue to send 8 data segments +0 write(4, ..., 10000) = 10000 +0 > P. 2001:10001(8000) ack 1 // RTO +.188 > . 1:1001(1000) ack 1 // The original data is acked and new data is sent(F-RTO step 2.b) +0 < . 1:1(0) ack 2001 win 257 +0 > P. 10001:12001(2000) ack 1 // D-SACK caused by TLP is regarded as a dupack, this results in // the incorrect judgment of "loss was real"(F-RTO step 3.a) +.022 < . 1:1(0) ack 2001 win 257 <sack 1001:2001,nop,nop> // Never-retransmitted data(3001:4001) are acked and // expect to switch to open state(F-RTO step 3.b) +0 < . 1:1(0) ack 4001 win 257 +0 %{ assert tcpi_ca_state == 0, tcpi_ca_state }% Fixes: e33099f96d99 ("tcp: implement RFC5682 F-RTO") Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/1650967419-2150-1-git-send-email-yangpc@wangsu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 28 April 2022, 17:35:38 UTC
c26d0d9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Fix incorrect TCP connection tracking window reset for non-syn packets, from Florian Westphal. 2) Incorrect dependency on CONFIG_NFT_FLOW_OFFLOAD, from Volodymyr Mytnyk. 3) Fix nft_socket from the output path, from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_socket: only do sk lookups when indev is available netfilter: conntrack: fix udp offload timeout sysctl netfilter: nf_conntrack_tcp: re-init for syn packets only ==================== Link: https://lore.kernel.org/r/20220428142109.38726-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 28 April 2022, 16:56:00 UTC
4a2316a Merge tag 'gfs2-v5.18-rc4-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fix from Andreas Gruenbacher: - No short reads or writes upon glock contention * tag 'gfs2-v5.18-rc4-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: No short reads or writes upon glock contention 28 April 2022, 16:50:29 UTC
aeaf59b Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits" This reverts commit 723ad916134784b317b72f3f6cf0f7ba774e5dae When client requests channel or ring size larger than what the server can support the server will cap the request to the supported max. So, the client would not be able to successfully request resources that exceed the server limit. Fixes: 723ad9161347 ("ibmvnic: Add ethtool private flag for driver-defined queue limits") Signed-off-by: Dany Madden <drt@linux.ibm.com> Link: https://lore.kernel.org/r/20220427235146.23189-1-drt@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 28 April 2022, 16:46:18 UTC
66a2f5e net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK The Time-Specified Departure feature is indeed mutually exclusive with TX IP checksumming in ENETC, but TX checksumming in itself is broken and was removed from this driver in commit 82728b91f124 ("enetc: Remove Tx checksumming offload code"). The blamed commit declared NETIF_F_HW_CSUM in dev->features to comply with software TSO's expectations, and still did the checksumming in software by calling skb_checksum_help(). So there isn't any restriction for the Time-Specified Departure feature. However, enetc_setup_tc_txtime() doesn't understand that, and blindly looks for NETIF_F_CSUM_MASK. Instead of checking for things which can literally never happen in the current code base, just remove the check and let the driver offload tc-etf qdiscs. Fixes: acede3c5dad5 ("net: enetc: declare NETIF_F_HW_CSUM and do it in software") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220427203017.1291634-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 28 April 2022, 16:45:48 UTC
f049efc ixgbe: ensure IPsec VF<->PF compatibility The VF driver can forward any IPsec flags and such makes the function is not extendable and prone to backward/forward incompatibility. If new software runs on VF, it won't know that PF configured something completely different as it "knows" only XFRM_OFFLOAD_INBOUND flag. Fixes: eda0333ac293 ("ixgbe: add VF IPsec management") Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shannon Nelson <snelson@pensando.io> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220427173152.443102-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 28 April 2022, 16:40:02 UTC
8061e16 Merge tag 'xfs-5.18-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs fixes from Dave Chinner: - define buffer bit flags as unsigned to fix gcc-5 + c11 warnings - remove redundant XFS fields from MAINTAINERS - fix inode buffer locking order regression * tag 'xfs-5.18-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: reorder iunlink remove operation in xfs_ifree MAINTAINERS: update IOMAP FILESYSTEM LIBRARY and XFS FILESYSTEM xfs: convert buffer flags to unsigned. 28 April 2022, 16:37:56 UTC
126858d MAINTAINERS: Update BNXT entry with firmware files There appears to be a maintainer gap for BNXT TEE firmware files which causes some patches to be missed. Update the entry for the BNXT Ethernet controller with its companion firmware files. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220427163606.126154-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 28 April 2022, 16:37:28 UTC
a12475f Merge branch 'thermal-int340x' Merge a fix for the attr.show callback prototype in the int340x thermal driver (Kees Cook). * thermal-int340x: thermal: int340x: Fix attr.show callback prototype 28 April 2022, 14:51:24 UTC
fda0573 Merge tag 'iio-fixes-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio Pull set of IIO fixes for 5.18 from Jonathan Cameron: "1st set of IIO fixes for the 5.18 cycle ad3552r: - Fix a bug with error codes being stored in unsigned local variable. - Fix IS_ERR when value is either NULL or not rather than ERR_PTR ad5446 - Fix shifting of read_raw value. ad5592r - Fix missing return value being set for a fwnode property read. ad7280a - Wrong variable being used to set thresholds. admv8818 - Kconfig dependency fix. ak8975 - Missing regulator disable in error path. bmi160 - Disable regulators in an error path. dac5571 - Fix chip id detection for devices with OF bindings. inv_icm42600 - Handle a case of a missing I2C NACK during initially configuration. ltc2688 - Fix voltage scaling where integer part was written twice and decimal part not at all. scd4x - Handle error before using value. sx9310 - Device property parsing against indio_dev->dev.of_node which hasn't been set yet. sx9324 - Fix hardware gain related maths. - Wrong defaults for precharge internal resistance register." * tag 'iio-fixes-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: imu: inv_icm42600: Fix I2C init possible nack iio: dac: ltc2688: fix voltage scale read iio:dac:ad3552r: Fix an IS_ERR() vs NULL check iio: sx9324: Fix default precharge internal resistance register iio: dac: ad5446: Fix read_raw not returning set value iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on() iio:proximity:sx9324: Fix hardware gain read/write iio:proximity:sx_common: Fix device property parsing on DT systems iio: adc: ad7280a: Fix wrong variable used when setting thresholds. iio:filter:admv8818: select REGMAP_SPI for ADMV8818 iio: dac: ad5592r: Fix the missing return value. iio: dac: dac5571: Fix chip id detection for OF devices iio:imu:bmi160: disable regulator in error path iio: scd4x: check return of scd4x_write_and_fetch iio: dac: ad3552r: fix signedness bug in ad3552r_reset() 28 April 2022, 14:35:55 UTC
743b83f netfilter: nft_socket: only do sk lookups when indev is available Check if the incoming interface is available and NFT_BREAK in case neither skb->sk nor input device are set. Because nf_sk_lookup_slow*() assume packet headers are in the 'in' direction, use in postrouting is not going to yield a meaningful result. Same is true for the forward chain, so restrict the use to prerouting, input and output. Use in output work if a socket is already attached to the skb. Fixes: 554ced0a6e29 ("netfilter: nf_tables: add support for native socket matching") Reported-and-tested-by: Topi Miettinen <toiwoton@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 28 April 2022, 14:15:23 UTC
edbd977 Merge branch 'pm-cpuidle' Merge cpuidle fixes for 5.18-rc5: - Make intel_idle enable C1E promotion on all CPUs when C1E is preferred to C1 (Artem Bityutskiy). - Make C6 optimization on Sapphire Rapids added recently work as expected if both C1E and C1 are "preferred" (Artem Bityutskiy). * pm-cpuidle: intel_idle: Fix SPR C6 optimization intel_idle: Fix the 'preferred_cstates' module parameter 28 April 2022, 14:09:50 UTC
a5d20d4 perf symbol: Remove arch__symbols__fixup_end() Now the generic code can handle kallsyms fixup properly so no need to keep the arch-functions anymore. Fixes: 3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Will Deacon <will@kernel.org> Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220416004048.1514900-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 28 April 2022, 13:51:40 UTC
8799ebc perf symbol: Update symbols__fixup_end() Now arch-specific functions all do the same thing. When it fixes the symbol address it needs to check the boundary between the kernel image and modules. For the last symbol in the previous region, it cannot know the exact size as it's discarded already. Thus it just uses a small page size (4096) and rounds it up like the last symbol. Fixes: 3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Will Deacon <will@kernel.org> Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220416004048.1514900-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 28 April 2022, 13:51:33 UTC
838425f perf symbol: Pass is_kallsyms to symbols__fixup_end() The symbol fixup is necessary for symbols in kallsyms since they don't have size info. So we use the next symbol's address to calculate the size. Now it's also used for user binaries because sometimes they miss size for hand-written asm functions. There's a arch-specific function to handle kallsyms differently but currently it cannot distinguish kallsyms from others. Pass this information explicitly to handle it properly. Note that those arch functions will be moved to the generic function so I didn't added it to the arch-functions. Fixes: 3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Will Deacon <will@kernel.org> Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220416004048.1514900-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 28 April 2022, 13:51:20 UTC
3b9a8c8 perf test: Add perf_event_attr test for Arm SPE Adds a perf_event_attr test for Arm SPE in which the presence of physical addresses are checked when SPE unit is run with pa_enable=1. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: John Garry <john.garry@huawei.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Will Deacon <will@kernel.org> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20220421165205.117662-4-timothy.hayes@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 28 April 2022, 13:40:49 UTC
7599b70 perf arm-spe: Fix SPE events with phys addresses This patch corrects a bug whereby SPE collection is invoked with pa_enable=1 but synthesized events fail to show physical addresses. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: John Garry <john.garry@huawei.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Will Deacon <will@kernel.org> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20220421165205.117662-3-timothy.hayes@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 28 April 2022, 13:39:28 UTC
4e13f67 perf arm-spe: Fix addresses of synthesized SPE events This patch corrects a bug whereby synthesized events from SPE samples are missing virtual addresses. Fixes: 54f7815efef7fad9 ("perf arm-spe: Fill address info for samples") Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: bpf@vger.kernel.org Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: John Garry <john.garry@huawei.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: netdev@vger.kernel.org Cc: Song Liu <songliubraving@fb.com> Cc: Will Deacon <will@kernel.org> Cc: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20220421165205.117662-2-timothy.hayes@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 28 April 2022, 13:39:14 UTC
de8fd13 perf intel-pt: Fix timeless decoding with perf.data directory Intel PT does not capture data in separate directories, so do not use separate directory processing because it doesn't work for timeless decoding. It also looks like it doesn't support one_mmap handling. Example: Before: # perf record --kcore -a -e intel_pt/tsc=0/k sleep 0.1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.799 MB perf.data ] # perf script --itrace=bep | head # After: # perf script --itrace=bep | head perf 21073 [000] psb: psb offs: 0 ffffffffaa68faf4 native_write_msr+0x4 ([kernel.kallsyms]) perf 21073 [000] cbr: cbr: 45 freq: 4505 MHz (161%) ffffffffaa68faf4 native_write_msr+0x4 ([kernel.kallsyms]) perf 21073 [000] 1 branches:k: 0 [unknown] ([unknown]) => ffffffffaa68faf6 native_write_msr+0x6 ([kernel.kallsyms]) perf 21073 [000] 1 branches:k: ffffffffaa68faf8 native_write_msr+0x8 ([kernel.kallsyms]) => ffffffffaa61aab0 pt_config_start+0x60 ([kernel.kallsyms]) perf 21073 [000] 1 branches:k: ffffffffaa61aabd pt_config_start+0x6d ([kernel.kallsyms]) => ffffffffaa61b8ad pt_event_start+0x27d ([kernel.kallsyms]) perf 21073 [000] 1 branches:k: ffffffffaa61b8bb pt_event_start+0x28b ([kernel.kallsyms]) => ffffffffaa61ba60 pt_event_add+0x40 ([kernel.kallsyms]) perf 21073 [000] 1 branches:k: ffffffffaa61ba76 pt_event_add+0x56 ([kernel.kallsyms]) => ffffffffaa880e86 event_sched_in+0xc6 ([kernel.kallsyms]) perf 21073 [000] 1 branches:k: ffffffffaa880e9b event_sched_in+0xdb ([kernel.kallsyms]) => ffffffffaa880ea5 event_sched_in+0xe5 ([kernel.kallsyms]) perf 21073 [000] 1 branches:k: ffffffffaa880eba event_sched_in+0xfa ([kernel.kallsyms]) => ffffffffaa880f96 event_sched_in+0x1d6 ([kernel.kallsyms]) perf 21073 [000] 1 branches:k: ffffffffaa880fc8 event_sched_in+0x208 ([kernel.kallsyms]) => ffffffffaa880ec0 event_sched_in+0x100 ([kernel.kallsyms]) Fixes: bb6be405c4a2a5 ("perf session: Load data directory files for analysis") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/r/20220428093109.274641-1-adrian.hunter@intel.com Cc: Ian Rogers <irogers@google.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: linux-kernel@vger.kernel.org 28 April 2022, 13:20:52 UTC
296abc0 gfs2: No short reads or writes upon glock contention Commit 00bfe02f4796 ("gfs2: Fix mmap + page fault deadlocks for buffered I/O") changed gfs2_file_read_iter() and gfs2_file_buffered_write() to allow dropping the inode glock while faulting in user buffers. When the lock was dropped, a short result was returned to indicate that the operation was interrupted. As pointed out by Linus (see the link below), this behavior is broken and the operations should always re-acquire the inode glock and resume the operation instead. Link: https://lore.kernel.org/lkml/CAHk-=whaz-g_nOOoo8RRiWNjnv2R+h6_xk2F1J4TuSRxk1MtLw@mail.gmail.com/ Fixes: 00bfe02f4796 ("gfs2: Fix mmap + page fault deadlocks for buffered I/O") Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> 28 April 2022, 13:14:48 UTC
c35fe2a elf: Fix the arm64 MTE ELF segment name and value Unfortunately, the name/value choice for the MTE ELF segment type (PT_ARM_MEMTAG_MTE) was pretty poor: LOPROC+1 is already in use by PT_AARCH64_UNWIND, as defined in the AArch64 ELF ABI (https://github.com/ARM-software/abi-aa/blob/main/aaelf64/aaelf64.rst). Update the ELF segment type value to LOPROC+2 and also change the define to PT_AARCH64_MEMTAG_MTE to match the AArch64 ELF ABI namespace. The AArch64 ELF ABI document is updating accordingly (segment type not previously mentioned in the document). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: 761b9b366cec ("elf: Introduce the ARM MTE ELF segment type") Cc: Will Deacon <will@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Machado <luis.machado@arm.com> Cc: Richard Earnshaw <Richard.Earnshaw@arm.com> Link: https://lore.kernel.org/r/20220425151833.2603830-1-catalin.marinas@arm.com Signed-off-by: Will Deacon <will@kernel.org> 28 April 2022, 10:37:06 UTC
febb2d2 Merge tag 'for-net-2022-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix regression causing some HCI events to be discarded when they shouldn't. * tag 'for-net-2022-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted Bluetooth: hci_event: Fix creating hci_conn object on error status Bluetooth: hci_event: Fix checking for invalid handle on error status ==================== Link: https://lore.kernel.org/r/20220427234031.1257281-1-luiz.dentz@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 28 April 2022, 08:18:51 UTC
8be70a8 scsi: target: pscsi: Set SCF_TREAT_READ_AS_NORMAL flag only if there is valid data With tape devices, the SCF_TREAT_READ_AS_NORMAL flag is used by the target subsystem to mark commands which have both data to return as well as sense data. But with pscsi, SCF_TREAT_READ_AS_NORMAL can be set even if there is no data to return. The SCF_TREAT_READ_AS_NORMAL flag causes the target core to call iscsit data-in callbacks even if there is no data, which iscsit does not support. This results in iscsit going into an error state requiring recovery and being unable to complete the command to the initiator. This issue can be resolved by fixing pscsi to only set SCF_TREAT_READ_AS_NORMAL if there is valid data to return alongside the sense data. Link: https://lore.kernel.org/r/20220427183250.291881-1-djeffery@redhat.com Fixes: bd81372065fa ("scsi: target: transport should handle st FM/EOM/ILI reads") Reported-by: Scott Hamilton <scott.hamilton@atos.net> Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 28 April 2022, 02:40:09 UTC
d2b52ec net: fec: add missing of_node_put() in fec_enet_init_stop_mode() Put device node in error path in fec_enet_init_stop_mode(). Fixes: 8a448bf832af ("net: ethernet: fec: move GPR register offset and bit into DT") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220426125231.375688-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 28 April 2022, 00:53:48 UTC
af68656 bnx2x: fix napi API usage sequence While handling PCI errors (AER flow) driver tries to disable NAPI [napi_disable()] after NAPI is deleted [__netif_napi_del()] which causes unexpected system hang/crash. System message log shows the following: ======================================= [ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures. [ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)' [ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->error_detected(IO frozen) [ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports: 'need reset' [ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking bnx2x->error_detected(IO frozen) [ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports: 'need reset' [ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset' [ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow: [ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows: [ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow: [ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows: [ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset' [ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->slot_reset() [ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing... [ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset --> driver unload Uninterruptible tasks ===================== crash> ps | grep UN 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd] 215 2 0 c000000004c80000 UN 0.0 0 0 [kworker/0:2] 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty 32423 2 26 c00000020038c580 UN 0.0 0 0 [kworker/26:3] 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd EEH handler hung while bnx2x sleeping and holding RTNL lock =========================================================== crash> bt 213 PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd" #0 [c000000004d477e0] __schedule at c000000000c70808 #1 [c000000004d478b0] schedule at c000000000c70ee0 #2 [c000000004d478e0] schedule_timeout at c000000000c76dec #3 [c000000004d479c0] msleep at c0000000002120cc #4 [c000000004d479f0] napi_disable at c000000000a06448 ^^^^^^^^^^^^^^^^ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x] #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x] #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8 #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64 And the sleeping source code ============================ crash> dis -ls c000000000a06448 FILE: ../net/core/dev.c LINE: 6702 6697 { 6698 might_sleep(); 6699 set_bit(NAPI_STATE_DISABLE, &n->state); 6700 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) * 6702 msleep(1); 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) 6704 msleep(1); 6705 6706 hrtimer_cancel(&n->timer); 6707 6708 clear_bit(NAPI_STATE_DISABLE, &n->state); 6709 } EEH calls into bnx2x twice based on the system log above, first through bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes the following call chains: bnx2x_io_error_detected() +-> bnx2x_eeh_nic_unload() +-> bnx2x_del_all_napi() +-> __netif_napi_del() bnx2x_io_slot_reset() +-> bnx2x_netif_stop() +-> bnx2x_napi_disable() +->napi_disable() Fix this by correcting the sequence of NAPI APIs usage, that is delete the NAPI after disabling it. Fixes: 7fa6f34081f1 ("bnx2x: AER revised") Reported-by: David Christensen <drc@linux.vnet.ibm.com> Tested-by: David Christensen <drc@linux.vnet.ibm.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 28 April 2022, 00:50:32 UTC
a0df719 tls: Skip tls_append_frag on zero copy size Calling tls_append_frag when max_open_record_len == record->len might add an empty fragment to the TLS record if the call happens to be on the page boundary. Normally tls_append_frag coalesces the zero-sized fragment to the previous one, but not if it's on page boundary. If a resync happens then, the mlx5 driver posts dump WQEs in tx_post_resync_dump, and the empty fragment may become a data segment with byte_count == 0, which will confuse the NIC and lead to a CQE error. This commit fixes the described issue by skipping tls_append_frag on zero size to avoid adding empty fragments. The fix is not in the driver, because an empty fragment is hardly the desired behavior. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20220426154949.159055-1-maximmi@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 27 April 2022, 22:25:20 UTC
347cb5d Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2022-04-27 We've added 5 non-merge commits during the last 20 day(s) which contain a total of 6 files changed, 34 insertions(+), 12 deletions(-). The main changes are: 1) Fix xsk sockets when rx and tx are separately bound to the same umem, also fix xsk copy mode combined with busy poll, from Maciej Fijalkowski. 2) Fix BPF tunnel/collect_md helpers with bpf_xmit lwt hook usage which triggered a crash due to invalid metadata_dst access, from Eyal Birger. 3) Fix release of page pool in XDP live packet mode, from Toke Høiland-Jørgensen. 4) Fix potential NULL pointer dereference in kretprobes, from Adam Zabrocki. (Masami & Steven preferred this small fix to be routed via bpf tree given it's follow-up fix to Masami's rethook work that went via bpf earlier, too.) * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: xsk: Fix possible crash when multiple sockets are created kprobes: Fix KRETPROBES when CONFIG_KRETPROBE_ON_RETHOOK is set bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook bpf: Fix release of page_pool in BPF_PROG_RUN in test runner xsk: Fix l2fwd for copy mode + busy poll combo ==================== Link: https://lore.kernel.org/r/20220427212748.9576-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> 27 April 2022, 22:18:40 UTC
85ea6b1 KVM: arm64: Inject exception on out-of-IPA-range translation fault When taking a translation fault for an IPA that is outside of the range defined by the hypervisor (between the HW PARange and the IPA range), we stupidly treat it as an IO and forward the access to userspace. Of course, userspace can't do much with it, and things end badly. Arguably, the guest is braindead, but we should at least catch the case and inject an exception. Check the faulting IPA against: - the sanitised PARange: inject an address size fault - the IPA size: inject an abort Reported-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> 27 April 2022, 22:02:23 UTC
fb8cc33 drm/amdgpu: keep mmhub clock gating being enabled during s2idle suspend Without MMHUB clock gating being enabled then MMHUB will not disconnect from DF and will result in DF C-state entry can't be accessed during S2idle suspend, and eventually s0ix entry will be blocked. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 27 April 2022, 21:38:02 UTC
a71849c drm/amd/pm: fix the deadlock issue observed on SI The adev->pm.mutx is already held at the beginning of amdgpu_dpm_compute_clocks/amdgpu_dpm_enable_uvd/amdgpu_dpm_enable_vce. But on their calling path, amdgpu_display_bandwidth_update will be called and thus its sub functions amdgpu_dpm_get_sclk/mclk. They will then try to acquire the same adev->pm.mutex and deadlock will occur. By placing amdgpu_display_bandwidth_update outside of adev->pm.mutex protection(considering logically they do not need such protection) and restructuring the call flow accordingly, we can eliminate the deadlock issue. This comes with no real logics change. Fixes: 3712e7a49459 ("drm/amd/pm: unified lock protections in amdgpu_dpm.c") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Arthur Marsh <arthur.marsh@internode.on.net> Link: https://lore.kernel.org/all/9e689fea-6c69-f4b0-8dee-32c4cf7d8f9c@molgen.mpg.de/ BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1957 Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 27 April 2022, 21:38:02 UTC
65e5498 drm/amd/display: Fix memory leak in dcn21_clock_source_create When dcn20_clk_src_construct() fails, we need to release clk_src. Fixes: 6f4e6361c3ff ("drm/amd/display: Add Renoir resource (v2)") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 27 April 2022, 21:19:31 UTC
f95af4a drm/amdgpu: don't runtime suspend if there are displays attached (v3) We normally runtime suspend when there are displays attached if they are in the DPMS off state, however, if something wakes the GPU we send a hotplug event on resume (in case any displays were connected while the GPU was in suspend) which can cause userspace to light up the displays again soon after they were turned off. Prior to commit 087451f372bf76 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's."), the driver took a runtime pm reference when the fbdev emulation was enabled because we didn't implement proper shadowing support for vram access when the device was off so the device never runtime suspended when there was a console bound. Once that commit landed, we now utilize the core fb helper implementation which properly handles the emulation, so runtime pm now suspends in cases where it did not before. Ultimately, we need to sort out why runtime suspend in not working in this case for some users, but this should restore similar behavior to before. v2: move check into runtime_suspend v3: wake ups -> wakeups in comment, retain pm_runtime behavior in runtime_idle callback Fixes: 087451f372bf76 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Link: https://lore.kernel.org/r/20220403132322.51c90903@darkstar.example.org/ Tested-by: Michele Ballabio <ballabio.m@gmail.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 27 April 2022, 21:18:53 UTC
f567656 drm/amdkfd: CRIU add support for GWS queues Add support to checkpoint/restore GWS (Global Wave Sync) queues. Signed-off-by: David Yat Sin <david.yatsin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 27 April 2022, 21:16:20 UTC
7c6b6e1 drm/amdkfd: Fix GWS queue count dqm->gws_queue_count and pdd->qpd.mapped_gws_queue need to be updated each time the queue gets evicted. Fixes: b8020b0304c8 ("drm/amdkfd: Enable over-subscription with >1 GWS queue") Signed-off-by: David Yat Sin <david.yatsin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 27 April 2022, 21:15:15 UTC
8f6379e KVM/arm64: Don't emulate a PMU for 32-bit guests if feature not set kvm->arch.arm_pmu is set when userspace attempts to set the first PMU attribute. As certain attributes are mandatory, arm_pmu ends up always being set to a valid arm_pmu, otherwise KVM will refuse to run the VCPU. However, this only happens if the VCPU has the PMU feature. If the VCPU doesn't have the feature bit set, kvm->arch.arm_pmu will be left uninitialized and equal to NULL. KVM doesn't do ID register emulation for 32-bit guests and accesses to the PMU registers aren't gated by the pmu_visibility() function. This is done to prevent injecting unexpected undefined exceptions in guests which have detected the presence of a hardware PMU. But even though the VCPU feature is missing, KVM still attempts to emulate certain aspects of the PMU when PMU registers are accessed. This leads to a NULL pointer dereference like this one, which happens on an odroid-c4 board when running the kvm-unit-tests pmu-cycle-counter test with kvmtool and without the PMU feature being set: [ 454.402699] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000150 [ 454.405865] Mem abort info: [ 454.408596] ESR = 0x96000004 [ 454.411638] EC = 0x25: DABT (current EL), IL = 32 bits [ 454.416901] SET = 0, FnV = 0 [ 454.419909] EA = 0, S1PTW = 0 [ 454.423010] FSC = 0x04: level 0 translation fault [ 454.427841] Data abort info: [ 454.430687] ISV = 0, ISS = 0x00000004 [ 454.434484] CM = 0, WnR = 0 [ 454.437404] user pgtable: 4k pages, 48-bit VAs, pgdp=000000000c924000 [ 454.443800] [0000000000000150] pgd=0000000000000000, p4d=0000000000000000 [ 454.450528] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 454.456036] Modules linked in: [ 454.459053] CPU: 1 PID: 267 Comm: kvm-vcpu-0 Not tainted 5.18.0-rc4 #113 [ 454.465697] Hardware name: Hardkernel ODROID-C4 (DT) [ 454.470612] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 454.477512] pc : kvm_pmu_event_mask.isra.0+0x14/0x74 [ 454.482427] lr : kvm_pmu_set_counter_event_type+0x2c/0x80 [ 454.487775] sp : ffff80000a9839c0 [ 454.491050] x29: ffff80000a9839c0 x28: ffff000000a83a00 x27: 0000000000000000 [ 454.498127] x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000a510000 [ 454.505198] x23: ffff000000a83a00 x22: ffff000003b01000 x21: 0000000000000000 [ 454.512271] x20: 000000000000001f x19: 00000000000003ff x18: 0000000000000000 [ 454.519343] x17: 000000008003fe98 x16: 0000000000000000 x15: 0000000000000000 [ 454.526416] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 454.533489] x11: 000000008003fdbc x10: 0000000000009d20 x9 : 000000000000001b [ 454.540561] x8 : 0000000000000000 x7 : 0000000000000d00 x6 : 0000000000009d00 [ 454.547633] x5 : 0000000000000037 x4 : 0000000000009d00 x3 : 0d09000000000000 [ 454.554705] x2 : 000000000000001f x1 : 0000000000000000 x0 : 0000000000000000 [ 454.561779] Call trace: [ 454.564191] kvm_pmu_event_mask.isra.0+0x14/0x74 [ 454.568764] kvm_pmu_set_counter_event_type+0x2c/0x80 [ 454.573766] access_pmu_evtyper+0x128/0x170 [ 454.577905] perform_access+0x34/0x80 [ 454.581527] kvm_handle_cp_32+0x13c/0x160 [ 454.585495] kvm_handle_cp15_32+0x1c/0x30 [ 454.589462] handle_exit+0x70/0x180 [ 454.592912] kvm_arch_vcpu_ioctl_run+0x1c4/0x5e0 [ 454.597485] kvm_vcpu_ioctl+0x23c/0x940 [ 454.601280] __arm64_sys_ioctl+0xa8/0xf0 [ 454.605160] invoke_syscall+0x48/0x114 [ 454.608869] el0_svc_common.constprop.0+0xd4/0xfc [ 454.613527] do_el0_svc+0x28/0x90 [ 454.616803] el0_svc+0x34/0xb0 [ 454.619822] el0t_64_sync_handler+0xa4/0x130 [ 454.624049] el0t_64_sync+0x18c/0x190 [ 454.627675] Code: a9be7bfd 910003fd f9000bf3 52807ff3 (b9415001) [ 454.633714] ---[ end trace 0000000000000000 ]--- In this particular case, Linux hasn't detected the presence of a hardware PMU because the PMU node is missing from the DTB, so userspace would have been unable to set the VCPU PMU feature even if it attempted it. What happens is that the 32-bit guest reads ID_DFR0, which advertises the presence of the PMU, and when it tries to program a counter, it triggers the NULL pointer dereference because kvm->arch.arm_pmu is NULL. kvm-arch.arm_pmu was introduced by commit 46b187821472 ("KVM: arm64: Keep a per-VM pointer to the default PMU"). Until that commit, this error would be triggered instead: [ 73.388140] ------------[ cut here ]------------ [ 73.388189] Unknown PMU version 0 [ 73.390420] WARNING: CPU: 1 PID: 264 at arch/arm64/kvm/pmu-emul.c:36 kvm_pmu_event_mask.isra.0+0x6c/0x74 [ 73.399821] Modules linked in: [ 73.402835] CPU: 1 PID: 264 Comm: kvm-vcpu-0 Not tainted 5.17.0 #114 [ 73.409132] Hardware name: Hardkernel ODROID-C4 (DT) [ 73.414048] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 73.420948] pc : kvm_pmu_event_mask.isra.0+0x6c/0x74 [ 73.425863] lr : kvm_pmu_event_mask.isra.0+0x6c/0x74 [ 73.430779] sp : ffff80000a8db9b0 [ 73.434055] x29: ffff80000a8db9b0 x28: ffff000000dbaac0 x27: 0000000000000000 [ 73.441131] x26: ffff000000dbaac0 x25: 00000000c600000d x24: 0000000000180720 [ 73.448203] x23: ffff800009ffbe10 x22: ffff00000b612000 x21: 0000000000000000 [ 73.455276] x20: 000000000000001f x19: 0000000000000000 x18: ffffffffffffffff [ 73.462348] x17: 000000008003fe98 x16: 0000000000000000 x15: 0720072007200720 [ 73.469420] x14: 0720072007200720 x13: ffff800009d32488 x12: 00000000000004e6 [ 73.476493] x11: 00000000000001a2 x10: ffff800009d32488 x9 : ffff800009d32488 [ 73.483565] x8 : 00000000ffffefff x7 : ffff800009d8a488 x6 : ffff800009d8a488 [ 73.490638] x5 : ffff0000f461a9d8 x4 : 0000000000000000 x3 : 0000000000000001 [ 73.497710] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000000dbaac0 [ 73.504784] Call trace: [ 73.507195] kvm_pmu_event_mask.isra.0+0x6c/0x74 [ 73.511768] kvm_pmu_set_counter_event_type+0x2c/0x80 [ 73.516770] access_pmu_evtyper+0x128/0x16c [ 73.520910] perform_access+0x34/0x80 [ 73.524532] kvm_handle_cp_32+0x13c/0x160 [ 73.528500] kvm_handle_cp15_32+0x1c/0x30 [ 73.532467] handle_exit+0x70/0x180 [ 73.535917] kvm_arch_vcpu_ioctl_run+0x20c/0x6e0 [ 73.540489] kvm_vcpu_ioctl+0x2b8/0x9e0 [ 73.544283] __arm64_sys_ioctl+0xa8/0xf0 [ 73.548165] invoke_syscall+0x48/0x114 [ 73.551874] el0_svc_common.constprop.0+0xd4/0xfc [ 73.556531] do_el0_svc+0x28/0x90 [ 73.559808] el0_svc+0x28/0x80 [ 73.562826] el0t_64_sync_handler+0xa4/0x130 [ 73.567054] el0t_64_sync+0x1a0/0x1a4 [ 73.570676] ---[ end trace 0000000000000000 ]--- [ 73.575382] kvm: pmu event creation failed -2 The root cause remains the same: kvm->arch.pmuver was never set to something sensible because the VCPU feature itself was never set. The odroid-c4 is somewhat of a special case, because Linux doesn't probe the PMU. But the above errors can easily be reproduced on any hardware, with or without a PMU driver, as long as userspace doesn't set the PMU feature. Work around the fact that KVM advertises a PMU even when the VCPU feature is not set by gating all PMU emulation on the feature. The guest can still access the registers without KVM injecting an undefined exception. Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220425145530.723858-1-alexandru.elisei@arm.com 27 April 2022, 21:10:29 UTC
2a50fc5 KVM: arm64: Handle host stage-2 faults from 32-bit EL0 When pKVM is enabled, host memory accesses are translated by an identity mapping at stage-2, which is populated lazily in response to synchronous exceptions from 64-bit EL1 and EL0. Extend this handling to cover exceptions originating from 32-bit EL0 as well. Although these are very unlikely to occur in practice, as the kernel typically ensures that user pages are initialised before mapping them in, drivers could still map previously untouched device pages into userspace and expect things to work rather than panic the system. Cc: Quentin Perret <qperret@google.com> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220427171332.13635-1-will@kernel.org 27 April 2022, 20:54:30 UTC
8f4dd16 Merge branch 'akpm' (patches from Andrew) Merge fixes from Andrew Morton: "Two patches. Subsystems affected by this patch series: mm/kasan and mm/debug" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: docs: vm/page_owner: use literal blocks for param description kasan: prevent cpu_quarantine corruption when CPU offline and cache shrink occur at same time 27 April 2022, 20:44:37 UTC
5603f9b docs: vm/page_owner: use literal blocks for param description Sphinx generates hard-to-read lists of parameters at the bottom of the page. Fix them by putting literal-block markers of "::" in front of them. Link: https://lkml.kernel.org/r/cfd3bcc0-b51d-0c68-c065-ca1c4c202447@gmail.com Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Fixes: 57f2b54a9379 ("Documentation/vm/page_owner.rst: update the documentation") Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Alex Shi <seakeel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 April 2022, 20:28:48 UTC
31fa985 kasan: prevent cpu_quarantine corruption when CPU offline and cache shrink occur at same time kasan_quarantine_remove_cache() is called in kmem_cache_shrink()/ destroy(). The kasan_quarantine_remove_cache() call is protected by cpuslock in kmem_cache_destroy() to ensure serialization with kasan_cpu_offline(). However the kasan_quarantine_remove_cache() call is not protected by cpuslock in kmem_cache_shrink(). When a CPU is going offline and cache shrink occurs at same time, the cpu_quarantine may be corrupted by interrupt (per_cpu_remove_cache operation). So add a cpu_quarantine offline flags check in per_cpu_remove_cache(). [akpm@linux-foundation.org: add comment, per Zqiang] Link: https://lkml.kernel.org/r/20220414025925.2423818-1-qiang1.zhang@intel.com Signed-off-by: Zqiang <qiang1.zhang@intel.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 April 2022, 20:28:48 UTC
4cddeac Revert "block: inherit request start time from bio for BLK_CGROUP" This reverts commit 0006707723233cb2a9a23ca19fc3d0864835704c. It has a couple problems: * bio_issue_time() is stored in bio->bi_issue truncated to 51 bits. This overflows in slightly over 26 days. Setting rq->io_start_time_ns with it means that io duration calculation would yield >26days after 26 days of uptime. This, for example, confuses kyber making it cause high IO latencies. * rq->io_start_time_ns should record the time that the IO is issued to the device so that on-device latency can be measured. However, bio_issue_time() is set before the bio goes through the rq-qos controllers (wbt, iolatency, iocost), so when the bio gets throttled in any of the mechanisms, the measured latencies make no sense - on-device latencies end up higher than request-alloc-to-completion latencies. We'll need a smarter way to avoid calling ktime_get_ns() repeatedly back-to-back. For now, let's revert the commit. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org # v5.16+ Link: https://lore.kernel.org/r/YmmeOLfo5lzc+8yI@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk> 27 April 2022, 19:51:28 UTC
7eac3bd intel_idle: Fix SPR C6 optimization The Sapphire Rapids (SPR) C6 optimization was added to the end of the 'spr_idle_state_table_update()' function. However, the function has a 'return' which may happen before the optimization has a chance to run. And this may prevent the optimization from happening. This is an unlikely scenario, but possible if user boots with, say, the 'intel_idle.preferred_cstates=6' kernel boot option. This patch fixes the issue by eliminating the problematic 'return' statement. Fixes: 3a9cf77b60dc ("intel_idle: add core C6 optimization for SPR") Suggested-by: Jan Beulich <jbeulich@suse.com> Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> [ rjw: Minor changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 27 April 2022, 18:36:47 UTC
39c184a intel_idle: Fix the 'preferred_cstates' module parameter Problem description. When user boots kernel up with the 'intel_idle.preferred_cstates=4' option, we enable C1E and disable C1 states on Sapphire Rapids Xeon (SPR). In order for C1E to work on SPR, we have to enable the C1E promotion bit on all CPUs. However, we enable it only on one CPU. Fix description. The 'intel_idle' driver already has the infrastructure for disabling C1E promotion on every CPU. This patch uses the same infrastructure for enabling C1E promotion on every CPU. It changes the boolean 'disable_promotion_to_c1e' variable to a tri-state 'c1e_promotion' variable. Tested on a 2-socket SPR system. I verified the following combinations: * C1E promotion enabled and disabled in BIOS. * Booted with and without the 'intel_idle.preferred_cstates=4' kernel argument. In all 4 cases C1E promotion was correctly set on all CPUs. Also tested on an old Broadwell system, just to make sure it does not cause a regression. C1E promotion was correctly disabled on that system, both C1 and C1E were exposed (as expected). Fixes: da0e58c038e6 ("intel_idle: add 'preferred_cstates' module argument") Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> [ rjw: Minor changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 27 April 2022, 18:36:47 UTC
0f03610 Merge tag 'cpufreq-arm-fixes-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull ARM cpufreq fixes for 5.18-rc5 from Viresh Kumar: "- Fix issues with the Qualcomm's cpufreq driver (Dmitry Baryshkov and Vladimir Zapolskiy). - Fix memory leak with the Sun501 driver (Xiaobing Luo)." * tag 'cpufreq-arm-fixes-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: qcom-cpufreq-hw: Clear dcvs interrupts cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platforms cpufreq: qcom-hw: provide online/offline operations cpufreq: qcom-hw: fix the opp entries refcounting cpufreq: qcom-hw: fix the race between LMH worker and cpuhp cpufreq: qcom-hw: drop affinity hint before freeing the IRQ 27 April 2022, 18:20:03 UTC
e4d8a29 hex2bin: fix access beyond string end If we pass too short string to "hex2bin" (and the string size without the terminating NUL character is even), "hex2bin" reads one byte after the terminating NUL character. This patch fixes it. Note that hex_to_bin returns -1 on error and hex2bin return -EINVAL on error - so we can't just return the variable "hi" or "lo" on error. This inconsistency may be fixed in the next merge window, but for the purpose of fixing this bug, we just preserve the existing behavior and return -1 and -EINVAL. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Fixes: b78049831ffe ("lib: add error checking to hex2bin") Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 April 2022, 17:57:33 UTC
e5be157 hex2bin: make the function hex_to_bin constant-time The function hex2bin is used to load cryptographic keys into device mapper targets dm-crypt and dm-integrity. It should take constant time independent on the processed data, so that concurrently running unprivileged code can't infer any information about the keys via microarchitectural convert channels. This patch changes the function hex_to_bin so that it contains no branches and no memory accesses. Note that this shouldn't cause performance degradation because the size of the new function is the same as the size of the old function (on x86-64) - and the new function causes no branch misprediction penalties. I compile-tested this function with gcc on aarch64 alpha arm hppa hppa64 i386 ia64 m68k mips32 mips64 powerpc powerpc64 riscv sh4 s390x sparc32 sparc64 x86_64 and with clang on aarch64 arm hexagon i386 mips32 mips64 powerpc powerpc64 s390x sparc32 sparc64 x86_64 to verify that there are no branches in the generated code. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 April 2022, 17:57:33 UTC
c7d2f89 bus: fsl-mc-msi: Fix MSI descriptor mutex lock for msi_first_desc() Commit e8604b1447b4 introduced a call to the helper function msi_first_desc(), which needs MSI descriptor mutex lock before call. However, the required mutex lock was not added. This results in lockdep assertion: WARNING: CPU: 4 PID: 119 at kernel/irq/msi.c:274 msi_first_desc+0xd0/0x10c msi_first_desc+0xd0/0x10c fsl_mc_msi_domain_alloc_irqs+0x7c/0xc0 fsl_mc_populate_irq_pool+0x80/0x3cc Fix this by adding the mutex lock and unlock around the function call. Fixes: e8604b1447b4 ("bus: fsl-mc-msi: Simplify MSI descriptor handling") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220412075636.755454-1-shinichiro.kawasaki@wdc.com 27 April 2022, 17:42:32 UTC
ad8d869 kernfs: fix NULL dereferencing in kernfs_remove kernfs_remove supported NULL kernfs_node param to bail out but revent per-fs lock change introduced regression that dereferencing the param without NULL check so kernel goes crash. This patch checks the NULL kernfs_node in kernfs_remove and if so, just return. Quote from bug report by Jirka ``` The bug is triggered by running NAS Parallel benchmark suite on SuperMicro servers with 2x Xeon(R) Gold 6126 CPU. Here is the error log: [ 247.035564] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 247.036009] #PF: supervisor read access in kernel mode [ 247.036009] #PF: error_code(0x0000) - not-present page [ 247.036009] PGD 0 P4D 0 [ 247.036009] Oops: 0000 [#1] PREEMPT SMP PTI [ 247.058060] CPU: 1 PID: 6546 Comm: umount Not tainted 5.16.0393c3714081a53795bbff0e985d24146def6f57f+ #16 [ 247.058060] Hardware name: Supermicro Super Server/X11DDW-L, BIOS 2.0b 03/07/2018 [ 247.058060] RIP: 0010:kernfs_remove+0x8/0x50 [ 247.058060] Code: 4c 89 e0 5b 5d 41 5c 41 5d 41 5e c3 49 c7 c4 f4 ff ff ff eb b2 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 41 54 55 <48> 8b 47 08 48 89 fd 48 85 c0 48 0f 44 c7 4c 8b 60 50 49 83 c4 60 [ 247.058060] RSP: 0018:ffffbbfa48a27e48 EFLAGS: 00010246 [ 247.058060] RAX: 0000000000000001 RBX: ffffffff89e31f98 RCX: 0000000080200018 [ 247.058060] RDX: 0000000080200019 RSI: fffff6760786c900 RDI: 0000000000000000 [ 247.058060] RBP: ffffffff89e31f98 R08: ffff926b61b24d00 R09: 0000000080200018 [ 247.122048] R10: ffff926b61b24d00 R11: ffff926a8040c000 R12: ffff927bd09a2000 [ 247.122048] R13: ffffffff89e31fa0 R14: dead000000000122 R15: dead000000000100 [ 247.122048] FS: 00007f01be0a8c40(0000) GS:ffff926fa8e40000(0000) knlGS:0000000000000000 [ 247.122048] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 247.122048] CR2: 0000000000000008 CR3: 00000001145c6003 CR4: 00000000007706e0 [ 247.122048] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 247.122048] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 247.122048] PKRU: 55555554 [ 247.122048] Call Trace: [ 247.122048] <TASK> [ 247.122048] rdt_kill_sb+0x29d/0x350 [ 247.122048] deactivate_locked_super+0x36/0xa0 [ 247.122048] cleanup_mnt+0x131/0x190 [ 247.122048] task_work_run+0x5c/0x90 [ 247.122048] exit_to_user_mode_prepare+0x229/0x230 [ 247.122048] syscall_exit_to_user_mode+0x18/0x40 [ 247.122048] do_syscall_64+0x48/0x90 [ 247.122048] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 247.122048] RIP: 0033:0x7f01be2d735b ``` Link: https://bugzilla.kernel.org/show_bug.cgi?id=215696 Link: https://lore.kernel.org/lkml/CAE4VaGDZr_4wzRn2___eDYRtmdPaGGJdzu_LCSkJYuY9BEO3cw@mail.gmail.com/ Fixes: 393c3714081a (kernfs: switch global kernfs_rwsem lock to per-fs lock) Cc: stable@vger.kernel.org Reported-by: Jirka Hladky <jhladky@redhat.com> Tested-by: Jirka Hladky <jhladky@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Minchan Kim <minchan@kernel.org> Link: https://lore.kernel.org/r/20220427172152.3505364-1-minchan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2022, 17:32:07 UTC
211ed54 Merge tag 'zonefs-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs Pull zonefs fixes from Damien Le Moal: "Two fixes for rc5: - Fix inode initialization to make sure that the inode flags are all cleared. - Use zone reset operation instead of close to make sure that the zone of an empty sequential file in never in an active state after closing the file" * tag 'zonefs-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: Fix management of open zones zonefs: Clear inode information flags on inode creation 27 April 2022, 17:30:29 UTC
03498b7 Merge tag 'mtd/fixes-for-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "Core fix: - Fix a possible data corruption of the 'part' field in mtd_info Rawnand fixes: - Fix the check on the return value of wait_for_completion_timeout - Fix wrong ECC parameters for mt7622 - Fix a possible memory corruption that might panic in the Qcom driver" * tag 'mtd/fixes-for-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: qcom: fix memory corruption that causes panic mtd: fix 'part' field data corruption in mtd_info mtd: rawnand: Fix return value check of wait_for_completion_timeout mtd: rawnand: fix ecc parameters for mt7622 27 April 2022, 17:14:52 UTC
7b5148b Add Eric Dumazet to networking maintainers Welcome Eric! Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Link: https://lore.kernel.org/r/20220426175723.417614-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 27 April 2022, 17:03:05 UTC
233087c floppy: disable FDRAWCMD by default Minh Yuan reported a concurrency use-after-free issue in the floppy code between raw_cmd_ioctl and seek_interrupt. [ It turns out this has been around, and that others have reported the KASAN splats over the years, but Minh Yuan had a reproducer for it and so gets primary credit for reporting it for this fix - Linus ] The problem is, this driver tends to break very easily and nowadays, nobody is expected to use FDRAWCMD anyway since it was used to manipulate non-standard formats. The risk of breaking the driver is higher than the risk presented by this race, and accessing the device requires privileges anyway. Let's just add a config option to completely disable this ioctl and leave it disabled by default. Distros shouldn't use it, and only those running on antique hardware might need to enable it. Link: https://lore.kernel.org/all/000000000000b71cdd05d703f6bf@google.com/ Link: https://lore.kernel.org/lkml/CAKcFiNC=MfYVW-Jt9A3=FPJpTwCD2PL_ULNCpsCVE5s8ZeBQgQ@mail.gmail.com Link: https://lore.kernel.org/all/CAEAjamu1FRhz6StCe_55XY5s389ZP_xmCF69k987En+1z53=eg@mail.gmail.com Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> Reported-by: syzbot+8e8958586909d62b6840@syzkaller.appspotmail.com Reported-by: cruise k <cruise4k@gmail.com> Reported-by: Kyungtae Kim <kt0755@gmail.com> Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Tested-by: Denis Efremov <efremov@linux.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 April 2022, 16:41:54 UTC
eb2fd9b platform/x86/intel: pmc/core: change pmc_lpm_modes to static Sparse reports this issue core.c: note: in included file: core.h:239:12: warning: symbol 'pmc_lpm_modes' was not declared. Should it be static? Global variables should not be defined in headers. This only works because core.h is only included by core.c. Single file use variables should be static, so change its storage-class specifier to static. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20220423123048.591405-1-trix@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> 27 April 2022, 14:55:54 UTC
00dd3ac platform/x86/intel/sdsi: Fix bug in multi packet reads Fix bug that added an offset to the mailbox addr during multi-packet reads. Did not affect current ABI since it doesn't support multi-packet transactions. Fixes: 2546c6000430 ("platform/x86: Add Intel Software Defined Silicon driver") Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20220420155622.1763633-4-david.e.box@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 27 April 2022, 14:55:54 UTC
a30393b platform/x86/intel/sdsi: Poll on ready bit for writes Due to change in firmware flow, update mailbox writes to poll on ready bit instead of run_busy bit. This change makes the polling method consistent for both writes and reads, which also uses the ready bit. Fixes: 2546c6000430 ("platform/x86: Add Intel Software Defined Silicon driver") Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20220420155622.1763633-3-david.e.box@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 27 April 2022, 14:55:54 UTC
679c7a3 platform/x86/intel/sdsi: Handle leaky bucket To prevent an agent from indefinitely holding the mailbox firmware has implemented a leaky bucket algorithm. Repeated access to the mailbox may now incur a delay of up to 2.1 seconds. Add a retry loop that tries for up to 2.5 seconds to acquire the mailbox. Fixes: 2546c6000430 ("platform/x86: Add Intel Software Defined Silicon driver") Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20220420155622.1763633-2-david.e.box@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 27 April 2022, 14:55:54 UTC
8d75f7b platform/x86: intel-uncore-freq: Prevent driver loading in guests Loading this driver in guests results in unchecked MSR access error for MSR 0x620. There is no use of reading and modifying package/die scope uncore MSRs in guests. So check for CPU feature X86_FEATURE_HYPERVISOR to prevent loading of this driver in guests. Fixes: dbce412a7733 ("platform/x86/intel-uncore-freq: Split common and enumeration part") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215870 Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20220427100304.2562990-1-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> 27 April 2022, 14:55:54 UTC
back to top