Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
9abf231 Linus Torvalds 16 October 2022, 22:36:24 UTC Linux 6.1-rc1 16 October 2022, 22:36:24 UTC
f1947d7 Linus Torvalds 16 October 2022, 22:27:07 UTC Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1 16 October 2022, 22:27:07 UTC
8636df9 Linus Torvalds 16 October 2022, 22:14:29 UTC Merge tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels when using bperf (perf BPF based counters) with cgroups. - Support HiSilicon PCIe Performance Monitoring Unit (PMU), that monitors bandwidth, latency, bus utilization and buffer occupancy. Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst. - User space tasks can migrate between CPUs, so when tracing selected CPUs, system-wide sideband is still needed, fix it in the setup of Intel PT on hybrid systems. - Fix metricgroups title message in 'perf list', it should state that the metrics groups are to be used with the '-M' option, not '-e'. - Sync the msr-index.h copy with the kernel sources, adding support for using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well as decoding it when printing the MSR tracepoint arguments. - Fix program header size and alignment when generating a JIT ELF in 'perf inject'. - Add multiple new Intel PT 'perf test' entries, including a jitdump one. - Fix the 'perf test' entries for 'perf stat' CSV and JSON output when running on PowerPC due to an invalid topology number in that arch. - Fix the 'perf test' for arm_coresight failures on the ARM Juno system. - Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this option to the or expression expected in the intercepted perf_event_open() syscall. - Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the 'perf annotate' asm parser. - Fix 'perf mem record -C' option processing, it was being chopped up when preparing the underlying 'perf record -e mem-events' and thus being ignored, requiring using '-- -C CPUs' as a workaround. - Improvements and tidy ups for 'perf test' shell infra. - Fix Intel PT information printing segfault in uClibc, where a NULL format was being passed to fprintf. * tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits) tools arch x86: Sync the msr-index.h copy with the kernel sources perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver perf auxtrace arm: Refactor event list iteration in auxtrace_record__init() perf tests stat+json_output: Include sanity check for topology perf tests stat+csv_output: Include sanity check for topology perf intel-pt: Fix system_wide dummy event for hybrid perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc perf test: Fix attr tests for PERF_FORMAT_LOST perf test: test_intel_pt.sh: Add 9 tests perf inject: Fix GEN_ELF_TEXT_OFFSET for jit perf test: test_intel_pt.sh: Add jitdump test perf test: test_intel_pt.sh: Tidy some alignment perf test: test_intel_pt.sh: Print a message when skipping kernel tracing perf test: test_intel_pt.sh: Tidy some perf record options perf test: test_intel_pt.sh: Fix return checking again perf: Skip and warn on unknown format 'configN' attrs perf list: Fix metricgroups title message perf mem: Fix -C option behavior for perf mem record perf annotate: Add missing condition flags for arm64 ... 16 October 2022, 22:14:29 UTC
2df7660 Linus Torvalds 16 October 2022, 18:12:22 UTC Merge tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the combination of Clang >= 14 and GAS <= 2.35. - Drop vmlinux.bz2 from the rpm package as it just annoyingly increased the package size. - Fix modpost error under build environments using musl. - Make *.ll files keep value names for easier debugging - Fix single directory build - Prevent RISC-V from selecting the broken DWARF5 support when Clang and GAS are used together. * tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5 kbuild: fix single directory build kbuild: add -fno-discard-value-names to cmd_cc_ll_c scripts/clang-tools: Convert clang-tidy args to list modpost: put modpost options before argument kbuild: Stop including vmlinux.bz2 in the rpm's Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5 16 October 2022, 18:12:22 UTC
2fcd8f1 Linus Torvalds 16 October 2022, 18:08:19 UTC Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk updates from Stephen Boyd: "This is the final part of the clk patches for this merge window. The clk rate range series needed another week to fully bake. Maxime fixed the bug that broke clk notifiers and prevented this from being included in the first pull request. He also added a unit test on top to make sure it doesn't break so easily again. The majority of the series fixes up how the clk_set_rate_*() APIs work, particularly around when the rate constraints are dropped and how they move around when reparenting clks. Overall it's a much needed improvement to the clk rate range APIs that used to be pretty broken if you looked sideways. Beyond the core changes there are a few driver fixes for a compilation issue or improper data causing clks to fail to register or have the wrong parents. These are good to get in before the first -rc so that the system actually boots on the affected devices" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits) clk: tegra: Fix Tegra PWM parent clock clk: at91: fix the build with binutils 2.27 clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks clk: mediatek: clk-mux: Add .determine_rate() callback clk: tests: Add tests for notifiers clk: Update req_rate on __clk_recalc_rates() clk: tests: Add missing test case for ranges clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d clk: Introduce the clk_hw_get_rate_range function clk: Zero the clk_rate_request structure clk: Stop forwarding clk_rate_requests to the parent clk: Constify clk_has_parent() clk: Introduce clk_core_has_parent() clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock clk: Add our request boundaries in clk_core_init_rate_req clk: Introduce clk_hw_init_rate_request() clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller clk: Change clk_core_init_rate_req prototype clk: Set req_rate on reparenting clk: Take into account uncached clocks in clk_set_rate_range() ... 16 October 2022, 18:08:19 UTC
b08cd74 Linus Torvalds 16 October 2022, 18:01:40 UTC Merge tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6 Pull more cifs updates from Steve French: - fix a regression in guest mounts to old servers - improvements to directory leasing (caching directory entries safely beyond the root directory) - symlink improvement (reducing roundtrips needed to process symlinks) - an lseek fix (to problem where some dir entries could be skipped) - improved ioctl for returning more detailed information on directory change notifications - clarify multichannel interface query warning - cleanup fix (for better aligning buffers using ALIGN and round_up) - a compounding fix - fix some uninitialized variable bugs found by Coverity and the kernel test robot * tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: improve SMB3 change notification support cifs: lease key is uninitialized in two additional functions when smb1 cifs: lease key is uninitialized in smb1 paths smb3: must initialize two ACL struct fields to zero cifs: fix double-fault crash during ntlmssp cifs: fix static checker warning cifs: use ALIGN() and round_up() macros cifs: find and use the dentry for cached non-root directories also cifs: enable caching of directories for which a lease is held cifs: prevent copying past input buffer boundaries cifs: fix uninitialised var in smb2_compound_op() cifs: improve symlink handling for smb2+ smb3: clarify multichannel warning cifs: fix regression in very old smb1 mounts cifs: fix skipping to incorrect offset in emit_cached_dirents 16 October 2022, 18:01:40 UTC
8049387 Tetsuo Handa 15 October 2022, 15:53:51 UTC Revert "cpumask: fix checking valid cpu range". This reverts commit 78e5a3399421 ("cpumask: fix checking valid cpu range"). syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at cpu_max_bits_warn() [1], for commit 78e5a3399421 ("cpumask: fix checking valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE() when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of "cpu" will trivially hit cpu == nr_cpumask_bits condition. Although syzbot found this problem in linux-next.git on 2022/09/27 [2], this problem was not fixed immediately. As a result, that patch was sent to linux.git before the patch author recognizes this problem, and syzbot started failing to test changes in linux.git since 2022/10/10 [3]. Andrew Jones proposed a fix for x86 and riscv architectures [4]. But [2] and [5] indicate that affected locations are not limited to arch code. More delay before we find and fix affected locations, less tested kernel (and more difficult to bisect and fix) before release. We should have inspected and fixed basically all cpumask users before applying that patch. We should not crash kernels in order to ask existing cpumask users to update their code, even if limited to CONFIG_DEBUG_PER_CPU_MAPS=y case. Link: https://syzkaller.appspot.com/bug?extid=d0fd2bf0dd6da72496dd [1] Link: https://syzkaller.appspot.com/bug?extid=21da700f3c9f0bc40150 [2] Link: https://syzkaller.appspot.com/bug?extid=51a652e2d24d53e75734 [3] Link: https://lkml.kernel.org/r/20221014155845.1986223-1-ajones@ventanamicro.com [4] Link: https://syzkaller.appspot.com/bug?extid=4d46c43d81c3bd155060 [5] Reported-by: Andrew Jones <ajones@ventanamicro.com> Reported-by: syzbot+d0fd2bf0dd6da72496dd@syzkaller.appspotmail.com Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Yury Norov <yury.norov@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 October 2022, 17:45:17 UTC
0a6de78 Nathan Chancellor 14 October 2022, 20:42:11 UTC lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5 When building with a RISC-V kernel with DWARF5 debug info using clang and the GNU assembler, several instances of the following error appear: /tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported Dumping the .s file reveals these .uleb128 directives come from .debug_loc and .debug_ranges: .Ldebug_loc0: .byte 4 # DW_LLE_offset_pair .uleb128 .Lfunc_begin0-.Lfunc_begin0 # starting offset .uleb128 .Ltmp1-.Lfunc_begin0 # ending offset .byte 1 # Loc expr size .byte 90 # DW_OP_reg10 .byte 0 # DW_LLE_end_of_list .Ldebug_ranges0: .byte 4 # DW_RLE_offset_pair .uleb128 .Ltmp6-.Lfunc_begin0 # starting offset .uleb128 .Ltmp27-.Lfunc_begin0 # ending offset .byte 4 # DW_RLE_offset_pair .uleb128 .Ltmp28-.Lfunc_begin0 # starting offset .uleb128 .Ltmp30-.Lfunc_begin0 # ending offset .byte 0 # DW_RLE_end_of_list There is an outstanding binutils issue to support a non-constant operand to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to be any movement on it, due to concerns over how it would work with linker relaxation. To avoid these build errors, prevent DWARF5 from being selected when using clang and an assembler that does not have support for these symbol deltas, which can be easily checked in Kconfig with as-instr plus the small test program from the dwz test suite from the binutils issue. Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215 Link: https://github.com/ClangBuiltLinux/linux/issues/1719 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 16 October 2022, 17:06:47 UTC
3753af7 Masahiro Yamada 14 October 2022, 20:18:11 UTC kbuild: fix single directory build Commit f110e5a250e3 ("kbuild: refactor single builds of *.ko") was wrong. KBUILD_MODULES _is_ needed for single builds. Otherwise, "make foo/bar/baz/" does not build module objects at all. Fixes: f110e5a250e3 ("kbuild: refactor single builds of *.ko") Reported-by: David Sterba <dsterba@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: David Sterba <dsterba@suse.com> 16 October 2022, 17:03:52 UTC
1501278 Linus Torvalds 16 October 2022, 00:05:07 UTC Merge tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab hotfix from Vlastimil Babka: "A single fix for the common-kmalloc series, for warnings on mips and sparc64 reported by Guenter Roeck" * tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation 16 October 2022, 00:05:07 UTC
36d8a3e Linus Torvalds 15 October 2022, 23:47:33 UTC Merge tag 'for-linus' of https://github.com/openrisc/linux Pull OpenRISC updates from Stafford Horne: "I have relocated to London so not much work from me while I get settled. Still, OpenRISC picked up two patches in this window: - Fix for kernel page table walking from Jann Horn - MAINTAINER entry cleanup from Palmer Dabbelt" * tag 'for-linus' of https://github.com/openrisc/linux: MAINTAINERS: git://github -> https://github.com for openrisc openrisc: Fix pagewalk usage in arch_dma_{clear, set}_uncached 15 October 2022, 23:47:33 UTC
4141096 Linus Torvalds 15 October 2022, 23:36:38 UTC Merge tag 'pci-v6.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fix from Bjorn Helgaas: "Revert the attempt to distribute spare resources to unconfigured hotplug bridges at boot time. This fixed some dock hot-add scenarios, but Jonathan Cameron reported that it broke a topology with a multi-function device where one function was a Switch Upstream Port and the other was an Endpoint" * tag 'pci-v6.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: Distribute available resources for root buses, too" 15 October 2022, 23:36:38 UTC
e36ce44 Hyeonggon Yoo 15 October 2022, 04:34:29 UTC mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation After commit d6a71648dbc0 ("mm/slab: kmalloc: pass requests larger than order-1 page to page allocator"), SLAB passes large ( > PAGE_SIZE * 2) requests to buddy like SLUB does. SLAB has been using kmalloc caches to allocate freelist_idx_t array for off slab caches. But after the commit, freelist_size can be bigger than KMALLOC_MAX_CACHE_SIZE. Instead of using pointer to kmalloc cache, use kmalloc_node() and only check if the kmalloc cache is off slab during calculate_slab_order(). If freelist_size > KMALLOC_MAX_CACHE_SIZE, no looping condition happens as it allocates freelist_idx_t array directly from buddy. Link: https://lore.kernel.org/all/20221014205818.GA1428667@roeck-us.net/ Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Fixes: d6a71648dbc0 ("mm/slab: kmalloc: pass requests larger than order-1 page to page allocator") Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> 15 October 2022, 19:42:05 UTC
34a0bac Palmer Dabbelt 13 October 2022, 21:46:37 UTC MAINTAINERS: git://github -> https://github.com for openrisc Github deprecated the git:// links about a year ago, so let's move to the https:// URLs instead. Reported-by: Conor Dooley <conor.dooley@microchip.com> Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Stafford Horne <shorne@gmail.com> 15 October 2022, 16:26:51 UTC
e3e9463 Steve French 15 October 2022, 05:43:22 UTC smb3: improve SMB3 change notification support Change notification is a commonly supported feature by most servers, but the current ioctl to request notification when a directory is changed does not return the information about what changed (even though it is returned by the server in the SMB3 change notify response), it simply returns when there is a change. This ioctl improves upon CIFS_IOC_NOTIFY by returning the notify information structure which includes the name of the file(s) that changed and why. See MS-SMB2 2.2.35 for details on the individual filter flags and the file_notify_information structure returned. To use this simply pass in the following (with enough space to fit at least one file_notify_information structure) struct __attribute__((__packed__)) smb3_notify { uint32_t completion_filter; bool watch_tree; uint32_t data_len; uint8_t data[]; } __packed; using CIFS_IOC_NOTIFY_INFO 0xc009cf0b or equivalently _IOWR(CIFS_IOCTL_MAGIC, 11, struct smb3_notify_info) The ioctl will block until the server detects a change to that directory or its subdirectories (if watch_tree is set). Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> 15 October 2022, 15:05:53 UTC
2bff065 Steve French 15 October 2022, 01:00:32 UTC cifs: lease key is uninitialized in two additional functions when smb1 cifs_open and _cifsFileInfo_put also end up with lease_key uninitialized in smb1 mounts. It is cleaner to set lease key to zero in these places where leases are not supported (smb1 can not return lease keys so the field was uninitialized). Addresses-Coverity: 1514207 ("Uninitialized scalar variable") Addresses-Coverity: 1514331 ("Uninitialized scalar variable") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> 15 October 2022, 15:05:53 UTC
625b60d Steve French 15 October 2022, 00:18:32 UTC cifs: lease key is uninitialized in smb1 paths It is cleaner to set lease key to zero in the places where leases are not supported (smb1 can not return lease keys so the field was uninitialized). Addresses-Coverity: 1513994 ("Uninitialized scalar variable") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> 15 October 2022, 15:05:53 UTC
f09bd69 Steve French 14 October 2022, 23:50:20 UTC smb3: must initialize two ACL struct fields to zero Coverity spotted that we were not initalizing Stbz1 and Stbz2 to zero in create_sd_buf. Addresses-Coverity: 1513848 ("Uninitialized scalar variable") Cc: <stable@vger.kernel.org> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> 15 October 2022, 15:05:53 UTC
b854b4e Paulo Alcantara 14 October 2022, 20:14:54 UTC cifs: fix double-fault crash during ntlmssp The crash occurred because we were calling memzero_explicit() on an already freed sess_data::iov[1] (ntlmsspblob) in sess_free_buffer(). Fix this by not calling memzero_explicit() on sess_data::iov[1] as it's already by handled by callers. Fixes: a4e430c8c8ba ("cifs: replace kfree() with kfree_sensitive() for sensitive data") Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> 15 October 2022, 15:04:38 UTC
a3a3656 Arnaldo Carvalho de Melo 07 August 2020, 11:45:47 UTC tools arch x86: Sync the msr-index.h copy with the kernel sources To pick up the changes in: b8d1d163604bd1e6 ("x86/apic: Don't disable x2APIC if locked") ca5b7c0d9621702e ("perf/x86/amd/lbr: Add LbrExtV2 branch record support") Addressing these tools/perf build warnings: diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' That makes the beautification scripts to pick some new entries: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2022-10-14 18:06:34.294561729 -0300 +++ after 2022-10-14 18:06:41.285744044 -0300 @@ -264,6 +264,7 @@ [0xc0000102 - x86_64_specific_MSRs_offset] = "KERNEL_GS_BASE", [0xc0000103 - x86_64_specific_MSRs_offset] = "TSC_AUX", [0xc0000104 - x86_64_specific_MSRs_offset] = "AMD64_TSC_RATIO", + [0xc000010e - x86_64_specific_MSRs_offset] = "AMD64_LBR_SELECT", [0xc000010f - x86_64_specific_MSRs_offset] = "AMD_DBG_EXTN_CFG", [0xc0000300 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_STATUS", [0xc0000301 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_CTL", $ Now one can trace systemwide asking to see backtraces to where that MSR is being read/written, see this example with a previous update: # perf trace -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB" ^C# If we use -v (verbose mode) we can see what it does behind the scenes: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB" Using CPUID AuthenticAMD-25-21-0 0x6a0 0x6a8 New filter for msr:read_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313) 0x6a0 0x6a8 New filter for msr:write_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313) mmap size 528384B ^C# Example with a frequent msr: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2 Using CPUID AuthenticAMD-25-21-0 0x48 New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841) 0x48 New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841) mmap size 528384B Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols 0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __schedule ([kernel.kallsyms]) schedule ([kernel.kallsyms]) futex_wait_queue_me ([kernel.kallsyms]) futex_wait ([kernel.kallsyms]) do_futex ([kernel.kallsyms]) __x64_sys_futex ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) entry_SYSCALL_64_after_hwframe ([kernel.kallsyms]) __futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so) 0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __schedule ([kernel.kallsyms]) schedule_idle ([kernel.kallsyms]) do_idle ([kernel.kallsyms]) cpu_startup_entry ([kernel.kallsyms]) secondary_startup_64_no_verify ([kernel.kallsyms]) # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniel Sneddon <daniel.sneddon@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Link: https://lore.kernel.org/lkml/Y0nQkz2TUJxwfXJd@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 15 October 2022, 13:13:16 UTC
5e91e57 Qi Liu 27 September 2022, 08:14:00 UTC perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet Add support for using 'perf report --dump-raw-trace' to parse PTT packet. Example usage: Output will contain raw PTT data and its textual representation, such as (8DW format): 0 0 0x5810 [0x30]: PERF_RECORD_AUXTRACE size: 0x400000 offset: 0 ref: 0xa5d50c725 idx: 0 tid: -1 cpu: 0 . . ... HISI PTT data: size 4194304 bytes . 00000000: 00 00 00 00 Prefix . 00000004: 08 20 00 60 Header DW0 . 00000008: ff 02 00 01 Header DW1 . 0000000c: 20 08 00 00 Header DW2 . 00000010: 10 e7 44 ab Header DW3 . 00000014: 2a a8 1e 01 Time . 00000020: 00 00 00 00 Prefix . 00000024: 01 00 00 60 Header DW0 . 00000028: 0f 1e 00 01 Header DW1 . 0000002c: 04 00 00 00 Header DW2 . 00000030: 40 00 81 02 Header DW3 . 00000034: ee 02 00 00 Time .... This patch only add basic parsing support according to the definition of the PTT packet described in Documentation/trace/hisi-ptt.rst. And the fields of each packet can be further decoded following the PCIe Spec's definition of TLP packet. Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi6124@gmail.com> Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Zeng Prime <prime.zeng@huawei.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/20220927081400.14364-4-yangyicong@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 15 October 2022, 13:13:16 UTC
057381a Qi Liu 27 September 2022, 08:13:59 UTC perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver HiSilicon PCIe tune and trace device (PTT) could dynamically tune the PCIe link's events, and trace the TLP headers). This patch add support for PTT device in perf tool, so users could use 'perf record' to get TLP headers trace data. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Acked-by: John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi6124@gmail.com> Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Zeng Prime <prime.zeng@huawei.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/20220927081400.14364-3-yangyicong@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 15 October 2022, 13:13:16 UTC
45a3975 Qi Liu 27 September 2022, 08:13:58 UTC perf auxtrace arm: Refactor event list iteration in auxtrace_record__init() Add find_pmu_for_event() and use to simplify logic in auxtrace_record_init(). find_pmu_for_event() will be reused in subsequent patches. Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi6124@gmail.com> Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Zeng Prime <prime.zeng@huawei.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/20220927081400.14364-2-yangyicong@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 15 October 2022, 13:13:16 UTC
58d4802 Athira Rajeev 06 October 2022, 15:51:49 UTC perf tests stat+json_output: Include sanity check for topology Testcase stat+json_output.sh fails in powerpc: 86: perf stat JSON output linter : FAILED! The testcase "stat+json_output.sh" verifies perf stat JSON output. The test covers aggregation modes like per-socket, per-core, per-die, -A (no_aggr mode) along with few other tests. It counts expected fields for various commands. For example say -A (i.e, AGGR_NONE mode), expects 7 fields in the output having "CPU" as first field. Same way, for per-socket, it expects the first field in result to point to socket id. The testcases compares the result with expected count. The values for socket, die, core and cpu are fetched from topology directory: /sys/devices/system/cpu/cpu*/topology. For example, socket value is fetched from "physical_package_id" file of topology directory. (cpu__get_topology_int() in util/cpumap.c) If a platform fails to fetch the topology information, values will be set to -1. For example, incase of pSeries platform of powerpc, value for "physical_package_id" is restricted and not exposed. So, -1 will be assigned. Perf code has a checks for valid cpu id in "aggr_printout" (stat-display.c), which displays the fields. So, in cases where topology values not exposed, first field of the output displaying will be empty. This cause the testcase to fail, as it counts number of fields in the output. Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output, becos of -1 value obtained from topology files for some, only 6 fields are printed. Hence a testcase failure reported due to mismatch in number of fields in the output. Patch here adds a sanity check in the testcase for topology. Check will help to skip the test if -1 value found. Fixes: 0c343af2a2f82844 ("perf test: JSON format checking") Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Suggested-by: Ian Rogers <irogers@google.com> Suggested-by: James Clark <james.clark@arm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Claire Jensen <cjense@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Link: https://lore.kernel.org/r/20221006155149.67205-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 15 October 2022, 13:13:16 UTC
cd400f6 Athira Rajeev 06 October 2022, 15:51:48 UTC perf tests stat+csv_output: Include sanity check for topology Testcase stat+csv_output.sh fails in powerpc: 84: perf stat CSV output linter: FAILED! The testcase "stat+csv_output.sh" verifies perf stat CSV output. The test covers aggregation modes like per-socket, per-core, per-die, -A (no_aggr mode) along with few other tests. It counts expected fields for various commands. For example say -A (i.e, AGGR_NONE mode), expects 7 fields in the output having "CPU" as first field. Same way, for per-socket, it expects the first field in result to point to socket id. The testcases compares the result with expected count. The values for socket, die, core and cpu are fetched from topology directory: /sys/devices/system/cpu/cpu*/topology. For example, socket value is fetched from "physical_package_id" file of topology directory. (cpu__get_topology_int() in util/cpumap.c) If a platform fails to fetch the topology information, values will be set to -1. For example, incase of pSeries platform of powerpc, value for "physical_package_id" is restricted and not exposed. So, -1 will be assigned. Perf code has a checks for valid cpu id in "aggr_printout" (stat-display.c), which displays the fields. So, in cases where topology values not exposed, first field of the output displaying will be empty. This cause the testcase to fail, as it counts number of fields in the output. Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output, becos of -1 value obtained from topology files for some, only 6 fields are printed. Hence a testcase failure reported due to mismatch in number of fields in the output. Patch here adds a sanity check in the testcase for topology. Check will help to skip the test if -1 value found. Fixes: 7473ee56dbc91c98 ("perf test: Add checking for perf stat CSV output.") Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Suggested-by: Ian Rogers <irogers@google.com> Suggested-by: James Clark <james.clark@arm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Claire Jensen <cjense@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Link: https://lore.kernel.org/r/20221006155149.67205-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 15 October 2022, 13:13:16 UTC
6cef7da Adrian Hunter 12 October 2022, 08:22:59 UTC perf intel-pt: Fix system_wide dummy event for hybrid User space tasks can migrate between CPUs, so when tracing selected CPUs, system-wide sideband is still needed, however evlist->core.has_user_cpus is not set in the hybrid case, so check the target cpu_list instead. Fixes: 7d189cadbeebc778 ("perf intel-pt: Track sideband system-wide when needed") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221012082259.22394-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 15 October 2022, 13:13:16 UTC
5a3d470 Adrian Hunter 12 October 2022, 08:22:58 UTC perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc uClibc segfaulted because NULL was passed as the format to fprintf(). That happened because one of the format strings was missing and intel_pt_print_info() didn't check that before calling fprintf(). Add the missing format string, and check format is not NULL before calling fprintf(). Fixes: 11fa7cb86b56d361 ("perf tools: Pass Intel PT information for decoding MTC and CYC") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221012082259.22394-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 15 October 2022, 13:13:16 UTC
e280396 James Clark 12 October 2022, 09:46:32 UTC perf test: Fix attr tests for PERF_FORMAT_LOST Since PERF_FORMAT_LOST was added, the default read format has that bit set, so add it to the tests. Keep the old value as well so that the test still passes on older kernels. This fixes the following failure: expected read_format=0|4, got 20 FAILED './tests/attr/test-record-C0' - match failure Fixes: 85b425f31c8866e0 ("perf record: Set PERF_FORMAT_LOST by default") Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20221012094633.21669-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 15 October 2022, 13:13:16 UTC
f77811a Ammy Yi 14 October 2022, 17:09:05 UTC perf test: test_intel_pt.sh: Add 9 tests Add tests: Test with MTC and TSC disabled Test with branches disabled Test with/without CYC Test recording with sample mode Test with kernel trace Test virtual LBR Test power events Test with TNT packets disabled Test with event_trace These tests mostly check that perf record works with the corresponding Intel PT config terms, sometimes also checking that certain packets do or do not appear in the resulting trace as appropriate. The "Test virtual LBR" is slightly trickier, using a Python script to check that branch stacks are actually synthesized. Signed-off-by: Ammy Yi <ammy.yi@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-8-adrian.hunter@intel.com Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 15 October 2022, 13:13:16 UTC
89b15d0 Adrian Hunter 14 October 2022, 17:09:04 UTC perf inject: Fix GEN_ELF_TEXT_OFFSET for jit When a program header was added, it moved the text section but GEN_ELF_TEXT_OFFSET was not updated. Fix by adding the program header size and aligning. Fixes: babd04386b1df8c3 ("perf jit: Include program header in ELF files") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Lieven Hey <lieven.hey@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-7-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 15 October 2022, 13:13:16 UTC
973db24 Adrian Hunter 14 October 2022, 17:09:03 UTC perf test: test_intel_pt.sh: Add jitdump test Add a test for decoding self-modifying code using a jitdump file. The test creates a workload that uses self-modifying code and generates its own jitdump file. The result is processed with perf inject --jit and checked for decoding errors. Note the test will fail without patch "perf inject: Fix GEN_ELF_TEXT_OFFSET for jit" applied. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-6-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 15 October 2022, 13:13:16 UTC
40053a4 Adrian Hunter 14 October 2022, 17:09:02 UTC perf test: test_intel_pt.sh: Tidy some alignment Tidy alignment of test function lines to make them more readable. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-5-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 15 October 2022, 13:13:16 UTC
9637bf8 Adrian Hunter 14 October 2022, 17:09:01 UTC perf test: test_intel_pt.sh: Print a message when skipping kernel tracing Messages display with the perf test -v option. Add a message to show when skipping a test because the user cannot do kernel tracing. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 15 October 2022, 13:13:16 UTC
5021d82 Adrian Hunter 14 October 2022, 17:09:00 UTC perf test: test_intel_pt.sh: Tidy some perf record options When not decoding, the options "-B -N --no-bpf-event" speed up perf record. Make a common function for them. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 15 October 2022, 13:13:16 UTC
e408049 Adrian Hunter 14 October 2022, 17:08:59 UTC perf test: test_intel_pt.sh: Fix return checking again count_result() does not always reset ret=0 which means the value can spill into the next test result. Fix by explicitly setting it to zero between tests. Committer testing: # perf test "Miscellaneous Intel PT testing" 110: Miscellaneous Intel PT testing : Ok # Tested as well with: # perf test -v "Miscellaneous Intel PT testing" Fixes: fd9b45e39cfaf885 ("perf test: test_intel_pt.sh: Fix return checking") Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 15 October 2022, 13:13:16 UTC
19d17ab Linus Torvalds 15 October 2022, 01:41:41 UTC Merge tag 'libnvdimm-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull nvdimm updates from Dan Williams: "Some small cleanups and fixes in and around the nvdimm subsystem. The most significant change is a regression fix for nvdimm namespace (volume) creation when the namespace size is smaller than 2MB/ Summary: - Fix nvdimm namespace creation on platforms that do not publish associated 'DIMM' metadata for a persistent memory region. - Miscellaneous fixes and cleanups" * tag 'libnvdimm-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: ACPI: HMAT: Release platform device in case of platform_device_add_data() fails dax: Remove usage of the deprecated ida_simple_xxx API libnvdimm/region: Allow setting align attribute on regions without mappings nvdimm/namespace: Fix comment typo nvdimm: make __nvdimm_security_overwrite_query static nvdimm/region: Fix kernel-doc nvdimm/namespace: drop unneeded temporary variable in size_store() nvdimm/namespace: return uuid_null only once in nd_dev_to_uuid() 15 October 2022, 01:41:41 UTC
b7270c6 Linus Torvalds 15 October 2022, 01:36:42 UTC Merge tag 'rtc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "A great rework of the isl12022 driver makes up the bulk of the changes. There is also an important fix for CMOS and then the usual small fixes: - switch to devm_clk_get_enabled() where relevant - cmos: event handler registration fix - isl12022: code improvements" * tag 'rtc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: rv3028: Fix codestyle errors rtc: cmos: Fix event handler registration ordering issue rtc: k3: Use devm_clk_get_enabled() helper rtc: jz4740: Use devm_clk_get_enabled() helper rtc: mpfs: Use devm_clk_get_enabled() helper rtc: ds1685: Fix spelling of function name in comment block rtc: isl12022: switch to using regmap API rtc: isl12022: drop redundant write to HR register rtc: isl12022: use dev_set_drvdata() instead of i2c_set_clientdata() rtc: isl12022: use %ptR rtc: isl12022: simplify some expressions rtc: isl12022: drop a dev_info() rtc: isl12022: specify range_min and range_max rtc: isl12022: stop using deprecated devm_rtc_device_register() rtc: stmp3xxx: Add failure handling for stmp3xxx_wdt_register() rtc: mxc: Use devm_clk_get_enabled() helper rtc: gamecube: Always reset HW_SRNPROT after read rtc: k3: detect SoC to determine erratum fix rtc: k3: wait until the unlock field is not zero rtc: mpfs: Remove printing of stray CR 15 October 2022, 01:36:42 UTC
4ce1b97 Linus Torvalds 15 October 2022, 01:31:28 UTC Merge tag 'i3c/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Alexandre Belloni: "Not much this cycle, only two fixes for a rare event" - fix device reattach issues" * tag 'i3c/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: master: Remove the wrong place of reattach. i3c: master: Free the old_dyn_addr when reattach. 15 October 2022, 01:31:28 UTC
b7cef0d Linus Torvalds 15 October 2022, 01:23:23 UTC Merge tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI and UBIFS updates from Richard Weinberger: "UBI: - Use bitmap API to allocate bitmaps - New attach mode, disable_fm, to attach without fastmap - Fixes for various typos in comments UBIFS: - Fix for a deadlock when setting xattrs for encrypted file - Fix for an assertion failures when truncating encrypted files - Fixes for various typos in comments" * tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: fastmap: Add fastmap control support for 'UBI_IOCATT' ioctl ubi: fastmap: Use the bitmap API to allocate bitmaps ubifs: Fix AA deadlock when setting xattr for encrypted file ubifs: Fix UBIFS ro fail due to truncate in the encrypted directory mtd: ubi: drop unexpected word 'a' in comments ubi: block: Fix typos in comments ubi: fastmap: Fix typo in comments ubi: Fix repeated words in comments ubi: ubi-media.h: Fix comment typo ubi: block: Remove in vain semicolon ubifs: Fix ubifs_check_dir_empty() kernel-doc comment 15 October 2022, 01:23:23 UTC
91080ab Linus Torvalds 15 October 2022, 01:14:48 UTC Merge tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux Pull UML updates from Richard Weinberger: - Move to strscpy() - Improve panic notifiers - Fix NR_CPUS usage - Fixes for various comments - Fixes for virtio driver * tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: uml: Remove the initialization of statics to 0 um: Do not initialise statics to 0. um: Fix comment typo um: Improve panic notifiers consistency and ordering um: remove unused reactivate_chan() declaration um: mmaper: add __exit annotations to module exit funcs um: virt-pci: add __init/__exit annotations to module init/exit funcs hostfs: move from strlcpy with unused retval to strscpy um: move from strlcpy with unused retval to strscpy um: increase default virtual physical memory to 64 MiB UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK um: read multiple msg from virtio slave request fd 15 October 2022, 01:14:48 UTC
73344a3 Linus Torvalds 14 October 2022, 20:47:42 UTC Merge tag 'asm-generic-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fix from Arnd Bergmann: "A last-minute arch/alpha regression fix: the previous asm-generic branch contained a new regression from a typo" * tag 'asm-generic-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: alpha: fix marvel_ioread8 build regression 14 October 2022, 20:47:42 UTC
ca1aaf9 Linus Torvalds 14 October 2022, 20:44:53 UTC Merge tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are three fixes for build warnings that came in during the merge window" * tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: mmp: Make some symbols static ARM: spear6xx: Staticize few definitions clk: spear: Move prototype to accessible header 14 October 2022, 20:44:53 UTC
a7b78be Stephen Boyd 14 October 2022, 20:44:44 UTC Merge branch 'clk-rate-range' into clk-next - Various clk rate range fixes - Drop clk rate range constraints on clk_put() (redux) * clk-rate-range: (28 commits) clk: mediatek: clk-mux: Add .determine_rate() callback clk: tests: Add tests for notifiers clk: Update req_rate on __clk_recalc_rates() clk: tests: Add missing test case for ranges clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d clk: Introduce the clk_hw_get_rate_range function clk: Zero the clk_rate_request structure clk: Stop forwarding clk_rate_requests to the parent clk: Constify clk_has_parent() clk: Introduce clk_core_has_parent() clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock clk: Add our request boundaries in clk_core_init_rate_req clk: Introduce clk_hw_init_rate_request() clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller clk: Change clk_core_init_rate_req prototype clk: Set req_rate on reparenting clk: Take into account uncached clocks in clk_set_rate_range() clk: tests: Add some tests for orphan with multiple parents clk: tests: Add tests for mux with multiple parents clk: tests: Add tests for single parent mux ... 14 October 2022, 20:44:44 UTC
c461c67 Jon Hunter 10 October 2022, 10:00:46 UTC clk: tegra: Fix Tegra PWM parent clock Commit 8c193f4714df ("pwm: tegra: Optimize period calculation") updated the period calculation in the Tegra PWM driver and now returns an error if the period requested is less than minimum period supported. This is breaking PWM support on various Tegra platforms. For example, on the Tegra210 Jetson Nano platform this is breaking the PWM fan support and probing the PWM fan driver now fails ... pwm-fan pwm-fan: Failed to configure PWM: -22 pwm-fan: probe of pwm-fan failed with error -22 The problem is that the default parent clock for the PWM on Tegra210 is a 32kHz clock and is unable to support the requested PWM period. Fix PWM support on Tegra20, Tegra30, Tegra114, Tegra124 and Tegra210 by updating the parent clock for the PWM to be the PLL_P. Fixes: 8c193f4714df ("pwm: tegra: Optimize period calculation") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Robert Eckelmann <longnoserob@gmail.com> # TF101 T20 Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # TF101 T20 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # TF201 T30 Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # TF700T T3 Link: https://lore.kernel.org/r/20221010100046.6477-1-jonathanh@nvidia.com Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org> 14 October 2022, 20:44:24 UTC
57d8496 Kefeng Wang 12 October 2022, 03:06:35 UTC clk: at91: fix the build with binutils 2.27 There is an issue when build with older versions of binutils 2.27.0, arch/arm/mach-at91/pm_suspend.S: Assembler messages: arch/arm/mach-at91/pm_suspend.S:1086: Error: garbage following instruction -- `ldr tmp1,=0x00020010UL' Use UL() macro to fix the issue in assembly file. Fixes: 4fd36e458392 ("ARM: at91: pm: add plla disable/enable support for sam9x60") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Link: https://lore.kernel.org/r/20221012030635.13140-1-wangkefeng.wang@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> 14 October 2022, 20:39:23 UTC
8c7bc6c Linus Walleij 13 October 2022, 14:07:45 UTC clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks These two clocks are now registered in the device tree as fixed clocks, causing a regression in the driver as the clock already exists with e.g. the name "pxo_board" as the MSM8660 GCC driver probes. Fix this by just not hard-coding this anymore and everything works like a charm. Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: baecbda52933 ("ARM: dts: qcom: msm8660: fix node names for fixed clocks") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221013140745.7801-1-linus.walleij@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> 14 October 2022, 20:39:09 UTC
b05ea33 AngeloGioacchino Del Regno 11 October 2022, 13:55:48 UTC clk: mediatek: clk-mux: Add .determine_rate() callback Since commit 262ca38f4b6e ("clk: Stop forwarding clk_rate_requests to the parent"), the clk_rate_request is .. as the title says, not forwarded anymore to the parent: this produces an issue with the MediaTek clock MUX driver during GPU DVFS on MT8195, but not on MT8192 or others. This is because, differently from others, like MT8192 where all of the clocks in the MFG parents tree are of mtk_mux type, but in the parent tree of MT8195's MFG clock, we have one mtk_mux clock and one (clk framework generic) mux clock, like so: names: mfg_bg3d -> mfg_ck_fast_ref -> top_mfg_core_tmp (or) mfgpll types: mtk_gate -> mux -> mtk_mux (or) mtk_pll To solve this issue and also keep the GPU DVFS clocks code working as expected, wire up a .determine_rate() callback for the mtk_mux ops; for that, the standard clk_mux_determine_rate_flags() was used as it was possible to. This commit was successfully tested on MT6795 Xperia M5, MT8173 Elm, MT8192 Spherion and MT8195 Tomato; no regressions were seen. For the sake of some more documentation about this issue here's the trace of it: [ 12.211587] ------------[ cut here ]------------ [ 12.211589] WARNING: CPU: 6 PID: 78 at drivers/clk/clk.c:1462 clk_core_init_rate_req+0x84/0x90 [ 12.211593] Modules linked in: stp crct10dif_ce mtk_adsp_common llc rfkill snd_sof_xtensa_dsp panfrost(+) sbs_battery cros_ec_lid_angle cros_ec_sensors snd_sof_of cros_ec_sensors_core hid_multitouch cros_usbpd_logger snd_sof gpu_sched snd_sof_utils fuse ipv6 [ 12.211614] CPU: 6 PID: 78 Comm: kworker/u16:2 Tainted: G W 6.0.0-next-20221011+ #58 [ 12.211616] Hardware name: Acer Tomato (rev2) board (DT) [ 12.211617] Workqueue: devfreq_wq devfreq_monitor [ 12.211620] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 12.211622] pc : clk_core_init_rate_req+0x84/0x90 [ 12.211625] lr : clk_core_forward_rate_req+0xa4/0xe4 [ 12.211627] sp : ffff80000893b8e0 [ 12.211628] x29: ffff80000893b8e0 x28: ffffdddf92f9b000 x27: ffff46a2c0e8bc05 [ 12.211632] x26: ffff46a2c1041200 x25: 0000000000000000 x24: 00000000173eed80 [ 12.211636] x23: ffff80000893b9c0 x22: ffff80000893b940 x21: 0000000000000000 [ 12.211641] x20: ffff46a2c1039f00 x19: ffff46a2c1039f00 x18: 0000000000000000 [ 12.211645] x17: 0000000000000038 x16: 000000000000d904 x15: 0000000000000003 [ 12.211649] x14: ffffdddf9357ce48 x13: ffffdddf935e71c8 x12: 000000000004803c [ 12.211653] x11: 00000000a867d7ad x10: 00000000a867d7ad x9 : ffffdddf90c28df4 [ 12.211657] x8 : ffffdddf9357a980 x7 : 0000000000000000 x6 : 0000000000000004 [ 12.211661] x5 : ffffffffffffffc8 x4 : 00000000173eed80 x3 : ffff80000893b940 [ 12.211665] x2 : 00000000173eed80 x1 : ffff80000893b940 x0 : 0000000000000000 [ 12.211669] Call trace: [ 12.211670] clk_core_init_rate_req+0x84/0x90 [ 12.211673] clk_core_round_rate_nolock+0xe8/0x10c [ 12.211675] clk_mux_determine_rate_flags+0x174/0x1f0 [ 12.211677] clk_mux_determine_rate+0x1c/0x30 [ 12.211680] clk_core_determine_round_nolock+0x74/0x130 [ 12.211682] clk_core_round_rate_nolock+0x58/0x10c [ 12.211684] clk_core_round_rate_nolock+0xf4/0x10c [ 12.211686] clk_core_set_rate_nolock+0x194/0x2ac [ 12.211688] clk_set_rate+0x40/0x94 [ 12.211691] _opp_config_clk_single+0x38/0xa0 [ 12.211693] _set_opp+0x1b0/0x500 [ 12.211695] dev_pm_opp_set_rate+0x120/0x290 [ 12.211697] panfrost_devfreq_target+0x3c/0x50 [panfrost] [ 12.211705] devfreq_set_target+0x8c/0x2d0 [ 12.211707] devfreq_update_target+0xcc/0xf4 [ 12.211708] devfreq_monitor+0x40/0x1d0 [ 12.211710] process_one_work+0x294/0x664 [ 12.211712] worker_thread+0x7c/0x45c [ 12.211713] kthread+0x104/0x110 [ 12.211716] ret_from_fork+0x10/0x20 [ 12.211718] irq event stamp: 7102 [ 12.211719] hardirqs last enabled at (7101): [<ffffdddf904ea5a0>] finish_task_switch.isra.0+0xec/0x2f0 [ 12.211723] hardirqs last disabled at (7102): [<ffffdddf91794b74>] el1_dbg+0x24/0x90 [ 12.211726] softirqs last enabled at (6716): [<ffffdddf90410be4>] __do_softirq+0x414/0x588 [ 12.211728] softirqs last disabled at (6507): [<ffffdddf904171d8>] ____do_softirq+0x18/0x24 [ 12.211730] ---[ end trace 0000000000000000 ]--- Fixes: 262ca38f4b6e ("clk: Stop forwarding clk_rate_requests to the parent") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221011135548.318323-1-angelogioacchino.delregno@collabora.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> 14 October 2022, 20:38:20 UTC
c67a85b Nick Desaulniers 14 October 2022, 16:53:02 UTC kbuild: add -fno-discard-value-names to cmd_cc_ll_c When debugging LLVM IR, it can be handy for clang to not discard value names used for local variables and parameters. Compare the generated IR. -fdiscard-value-names: define i32 @core_sys_select(i32 %0, ptr %1, ptr %2, ptr %3, ptr %4) { %6 = alloca i64 %7 = alloca %struct.poll_wqueues %8 = alloca [64 x i32] -fno-discard-value-names: define i32 @core_sys_select(i32 %n, ptr %inp, ptr %outp, ptr %exp, ptr %end_time) { %expire.i = alloca i64 %table.i = alloca %struct.poll_wqueues %stack_fds = alloca [64 x i32] The rule for generating human readable LLVM IR (.ll) is only useful as a debugging feature: $ make LLVM=1 fs/select.ll As Fangrui notes: A LLVM_ENABLE_ASSERTIONS=off build of Clang defaults to -fdiscard-value-names. A LLVM_ENABLE_ASSERTIONS=on build of Clang defaults to -fno-discard-value-names. Explicitly enable -fno-discard-value-names so that the IR always contains value names regardless of whether assertions were enabled or not. Assertions generally are not enabled in releases of clang packaged by distributions. Link: https://github.com/ClangBuiltLinux/linux/issues/1467 Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Fangrui Song <maskray@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 14 October 2022, 20:22:29 UTC
dca45ef Linus Torvalds 14 October 2022, 20:22:14 UTC Merge tag 'sound-fix-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are a few remaining patches for 6.1-rc1. The major changes are the hibernation fixes for HD-audio CS35L41 codec and the USB-audio small fixes against the last change. In addition, a couple of HD-audio regression fixes and a couple of potential mutex-deadlock fixes with OSS emulation in ALSA core side are seen" * tag 'sound-fix-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda: cs35l41: Support System Suspend ALSA: hda: cs35l41: Remove suspend/resume hda hooks ALSA: hda/cs_dsp_ctl: Fix mutex inversion when creating controls ALSA: hda: hda_cs_dsp_ctl: Ensure pwr_lock is held before reading/writing controls ALSA: hda: hda_cs_dsp_ctl: Minor clean and redundant code removal ALSA: oss: Fix potential deadlock at unregistration ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free() ALSA: hda/realtek: Add Intel Reference SSID to support headset keys ALSA: hda/realtek: Add quirk for ASUS GV601R laptop ALSA: hda/realtek: Correct pin configs for ASUS G533Z ALSA: usb-audio: Avoid superfluous endpoint setup ALSA: usb-audio: Correct the return code from snd_usb_endpoint_set_params() ALSA: usb-audio: Apply mutex around snd_usb_endpoint_set_params() ALSA: usb-audio: Avoid unnecessary interface change at EP close ALSA: hda: Update register polling macros ALSA: hda/realtek: remove ALC289_FIXUP_DUAL_SPK for Dell 5530 14 October 2022, 20:22:14 UTC
5964c92 Linus Torvalds 14 October 2022, 20:14:03 UTC Merge tag 'leds-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "This is very quiet release for LEDs, pca963 got blinking support and that's pretty much it" * tag 'leds-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: pca963: fix misleading indentation dt-bindings: leds: Document mmc trigger leds: pca963x: fix blink with hw acceleration 14 October 2022, 20:14:03 UTC
bd9a3db Linus Torvalds 14 October 2022, 20:03:00 UTC Merge tag 'sched-psi-2022-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull PSI updates from Ingo Molnar: - Various performance optimizations, resulting in a 4%-9% speedup in the mmtests/config-scheduler-perfpipe micro-benchmark. - New interface to turn PSI on/off on a per cgroup level. * tag 'sched-psi-2022-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/psi: Per-cgroup PSI accounting disable/re-enable interface sched/psi: Cache parent psi_group to speed up group iteration sched/psi: Consolidate cgroup_psi() sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ pressure sched/psi: Remove NR_ONCPU task accounting sched/psi: Optimize task switch inside shared cgroups again sched/psi: Move private helpers to sched/stats.h sched/psi: Save percpu memory when !psi_cgroups_enabled sched/psi: Don't create cgroup PSI files when psi_disabled sched/psi: Fix periodic aggregation shut off 14 October 2022, 20:03:00 UTC
1df046a Linus Torvalds 14 October 2022, 19:38:03 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Cortex-A55 errata workaround (repeat TLBI) - AMPERE1 added to the Spectre-BHB affected list - MTE fix to avoid setting PG_mte_tagged if no tags have been touched on a page - Fixed typo in the SCTLR_EL1.SPINTMASK bit naming (the commit log has other typos) - perf: return value check in ali_drw_pmu_probe(), ALIBABA_UNCORE_DRW_PMU dependency on ACPI * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Add AMPERE1 to the Spectre-BHB affected list arm64: mte: Avoid setting PG_mte_tagged if no tags cleared or restored MAINTAINERS: rectify file entry in ALIBABA PMU DRIVER drivers/perf: ALIBABA_UNCORE_DRW_PMU should depend on ACPI drivers/perf: fix return value check in ali_drw_pmu_probe() arm64: errata: Add Cortex-A55 to the repeat tlbi list arm64/sysreg: Fix typo in SCTR_EL1.SPINTMASK 14 October 2022, 19:38:03 UTC
5e714bf Linus Torvalds 14 October 2022, 19:28:43 UTC Merge tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more MM updates from Andrew Morton: - fix a race which causes page refcounting errors in ZONE_DEVICE pages (Alistair Popple) - fix userfaultfd test harness instability (Peter Xu) - various other patches in MM, mainly fixes * tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (29 commits) highmem: fix kmap_to_page() for kmap_local_page() addresses mm/page_alloc: fix incorrect PGFREE and PGALLOC for high-order page mm/selftest: uffd: explain the write missing fault check mm/hugetlb: use hugetlb_pte_stable in migration race check mm/hugetlb: fix race condition of uffd missing/minor handling zram: always expose rw_page LoongArch: update local TLB if PTE entry exists mm: use update_mmu_tlb() on the second thread kasan: fix array-bounds warnings in tests hmm-tests: add test for migrate_device_range() nouveau/dmem: evict device private memory during release nouveau/dmem: refactor nouveau_dmem_fault_copy_one() mm/migrate_device.c: add migrate_device_range() mm/migrate_device.c: refactor migrate_vma and migrate_deivce_coherent_page() mm/memremap.c: take a pgmap reference on page allocation mm: free device private pages have zero refcount mm/memory.c: fix race when faulting a device private page mm/damon: use damon_sz_region() in appropriate place mm/damon: move sz_damon_region to damon_sz_region lib/test_meminit: add checks for the allocation functions ... 14 October 2022, 19:28:43 UTC
5632e2b Bjorn Helgaas 14 October 2022, 18:45:45 UTC Revert "PCI: Distribute available resources for root buses, too" This reverts commit e96e27fc6f7971380283768e9a734af16b1716ee. Jonathan reported that this commit broke this topology, where all the space available on bus 02 was assigned to the 02:00.0 bridge window, leaving none for the e1000 device at 02:00.1: pci 0000:00:04.0: bridge window [mem 0x10200000-0x103fffff] to [bus 02-04] pci 0000:02:00.0: bridge window [mem 0x10200000-0x103fffff] to [bus 03-04] pci 0000:02:00.1: BAR 0: failed to assign [mem size 0x00020000] e1000 0000:02:00.1: can't ioremap BAR 0: [??? 0x00000000 flags 0x0] Link: https://lore.kernel.org/r/20221014124553.0000696f@huawei.com Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 14 October 2022, 19:27:58 UTC
f2e4413 Linus Torvalds 14 October 2022, 19:10:01 UTC Merge tag 'parisc-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "Fixes: - When we added basic vDSO support in kernel 5.18 we introduced a bug which prevented a mmap() of graphic card memory. This is because we used the DMB (data memory break trap bit) page flag as special-bit, but missed to clear that bit when loading the TLB. - Graphics card memory size was not correctly aligned - Spelling fixes (from Colin Ian King) Enhancements: - PDC console (which uses firmware calls) now rewritten as early console - Reduced size of alternative tables" * tag 'parisc-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix spelling mistake "mis-match" -> "mismatch" in eisa driver parisc: Fix userspace graphics card breakage due to pgtable special bit parisc: fbdev/stifb: Align graphics memory size to 4MB parisc: Convert PDC console to an early console parisc: Reduce kernel size by packing alternative tables 14 October 2022, 19:10:01 UTC
ebdca8e Linus Torvalds 14 October 2022, 18:36:05 UTC Merge tag 's390-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Vasily Gorbik: - Generate a change uevent on unsolicited device end I/O interrupt for z/VM unit record devices supported by the vmur driver. This event can be used to automatically trigger processing of files as they arrive in the z/VM reader. * tag 's390-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/vmur: generate uevent on unsolicited device end s390/vmur: remove unnecessary BUG statement 14 October 2022, 18:36:05 UTC
4985749 Linus Torvalds 14 October 2022, 18:21:11 UTC Merge tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - DT updates for the PolarFire SOC - a fix to correct the handling of write-only mappings - m{vetndor,arcd,imp}id is now in /proc/cpuinfo - the SiFive L2 cache controller support has been refactored to also support L3 caches - misc fixes, cleanups and improvements throughout the tree * tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits) MAINTAINERS: add RISC-V's patchwork RISC-V: Make port I/O string accessors actually work riscv: enable software resend of irqs RISC-V: Re-enable counter access from userspace riscv: vdso: fix NULL deference in vdso_join_timens() when vfork riscv: Add cache information in AUX vector soc: sifive: ccache: define the macro for the register shifts soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes soc: sifive: ccache: reduce printing on init soc: sifive: ccache: determine the cache level from dts soc: sifive: ccache: Rename SiFive L2 cache to Composable cache. dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache riscv: check for kernel config option in t-head memory types errata riscv: use BIT() marco for cpufeature probing riscv: use BIT() macros in t-head errata init riscv: drop some idefs from CMO initialization riscv: cleanup svpbmt cpufeature probing riscv: Pass -mno-relax only on lld < 15.0.0 RISC-V: Avoid dereferening NULL regs in die() dt-bindings: riscv: add new riscv,isa strings for emulators ... 14 October 2022, 18:21:11 UTC
70609c1 Linus Torvalds 14 October 2022, 18:16:18 UTC Merge tag 'powerpc-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix 32-bit syscall wrappers with 64-bit arguments of unaligned register-pairs. Notably this broke ftruncate64 & pread/write64, which can lead to file corruption. - Fix lost interrupts when returning to soft-masked context on 64-bit. - Fix build failure when CONFIG_DTL=n. Thanks to Nicholas Piggin, Jason A. Donenfeld, Guenter Roeck, Arnd Bergmann, and Sachin Sant. * tag 'powerpc-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Fix CONFIG_DTL=n build powerpc/64s/interrupt: Fix lost interrupts when returning to soft-masked context powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned register-pairs 14 October 2022, 18:16:18 UTC
2130b87 Nathan Chancellor 14 October 2022, 15:21:03 UTC drm/amd/display: Fix build breakage with CONFIG_DEBUG_FS=n After commit 8799c0be89eb ("drm/amd/display: Fix vblank refcount in vrr transition"), a build with CONFIG_DEBUG_FS=n is broken due to a misplaced brace, along the lines of: In file included from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_trace.h:39, from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:41: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: At top level: ./include/drm/drm_atomic.h:864:9: error: expected identifier or ‘(’ before ‘for’ 864 | for ((__i) = 0; \ | ^~~ drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8317:9: note: in expansion of macro ‘for_each_new_crtc_in_state’ 8317 | for_each_new_crtc_in_state(state, crtc, new_crtc_state, j) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ Move the brace within the #ifdef so that the file can be built with or without CONFIG_DEBUG_FS. Fixes: 8799c0be89eb ("drm/amd/display: Fix vblank refcount in vrr transition") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 October 2022, 18:13:19 UTC
34314cd Colin Ian King 13 October 2022, 22:19:15 UTC parisc: Fix spelling mistake "mis-match" -> "mismatch" in eisa driver There are several spelling mistakes in kernel error messages. Fix them. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> 14 October 2022, 18:06:30 UTC
a9e17d3 Paulo Alcantara 14 October 2022, 16:40:42 UTC cifs: fix static checker warning Remove unnecessary NULL check of oparam->cifs_sb when parsing symlink error response as it's already set by all smb2_open_file() callers and deferenced earlier. This fixes below report: fs/cifs/smb2file.c:126 smb2_open_file() warn: variable dereferenced before check 'oparms->cifs_sb' (see line 112) Link: https://lore.kernel.org/r/Y0kt42j2tdpYakRu@kili Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> 14 October 2022, 17:35:25 UTC
e552b7b Rob Herring 04 October 2022, 19:12:35 UTC perf: Skip and warn on unknown format 'configN' attrs If the kernel exposes a new perf_event_attr field in a format attr, perf will return an error stating the specified PMU can't be found. For example, a format attr with 'config3:0-63' causes an error as config3 is unknown to perf. This causes a compatibility issue between a newer kernel with older perf tool. Before this change with a kernel adding 'config3' I get: $ perf record -e arm_spe// -- true event syntax error: 'arm_spe//' \___ Cannot find PMU `arm_spe'. Missing kernel support? Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events After this change, I get: $ perf record -e arm_spe// -- true WARNING: 'arm_spe_0' format 'inv_event_filter' requires 'perf_event_attr::config3' which is not supported by this version of perf! [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.091 MB perf.data ] To support unknown configN formats, rework the YACC implementation to pass any config[0-9]+ format to perf_pmu__new_format() to handle with a warning. Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220914-arm-perf-tool-spe1-2-v2-v4-1-83c098e6212e@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 14 October 2022, 15:23:09 UTC
0cef141 Andi Kleen 04 October 2022, 19:26:34 UTC perf list: Fix metricgroups title message $ perf list metricgroups gives List of pre-defined events (to be used in -e): Metric Groups: Backend Bad BadSpec But that's incorrect of course because metric groups or metrics can only be specified with -M. So fix the message to say -e or -M Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20221004192634.998984-1-ak@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 14 October 2022, 15:21:42 UTC
7d60fa2 Namhyung Kim 04 October 2022, 20:02:11 UTC perf mem: Fix -C option behavior for perf mem record The -C/--cpu option was maily for report but it also affected record as it ate the option. So users needed to use "--" after perf mem record to pass the info to the perf record properly. Check if this option is set for record, and pass it to the actual perf record. Before) $ sudo perf --debug perf-event-open mem record -C 0 2>&1 | grep -a sys_perf_event_open ... sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 4 sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 6 sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 7 sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 8 sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 9 sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 10 sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 11 ... After) $ sudo perf --debug perf-event-open mem record -C 0 2>&1 | grep -a sys_perf_event_open ... sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 4 sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 6 sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7 Reported-by: Ravi Bangoria <ravi.bangoria@amd.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20221004200211.1444521-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 14 October 2022, 15:21:34 UTC
531778b Namhyung Kim 06 October 2022, 22:22:32 UTC perf annotate: Add missing condition flags for arm64 According to the document [1], it can also have 'hs', 'lo', 'vc', 'vs' as a condition code. Let's add them too. [1] https://community.arm.com/arm-community-blogs/b/architectures-and-processors-blog/posts/condition-codes-1-condition-flags-and-codes Reported-by: Kevin Nomura <nomurak@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20221006222232.266416-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 14 October 2022, 13:47:35 UTC
d5e5737 Arnaldo Carvalho de Melo 14 October 2022, 13:39:21 UTC libperf: Do not include non-UAPI linux/compiler.h header Its just for that __packed define, so use it expanded as __attribute__((packed)), like the other files in /usr/include do. This was problem was preventing building the libperf examples on ALT Linux and Fedora 35, fix it. Reported-by: Vitaly Chikunov <vt@altlinux.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Dmitry Levin <ldv@altlinux.org Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/Y0lnpl2Ix7VljVDc@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 14 October 2022, 13:44:20 UTC
04518e4 Guru Das Srinagesh 11 October 2022, 19:06:00 UTC scripts/clang-tools: Convert clang-tidy args to list Convert list of clang-tidy arguments to a list for ease of adding to them and extending them as required. Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 14 October 2022, 13:32:52 UTC
11df33c Richard Acayan 11 October 2022, 01:38:28 UTC modpost: put modpost options before argument The musl implementation of getopt stops looking for options after the first non-option argument. Put the options before the non-option argument so environments using musl can still build the kernel and modules. Fixes: f73edc8951b2 ("kbuild: unify two modpost invocations") Link: https://git.musl-libc.org/cgit/musl/tree/src/misc/getopt.c?h=dc9285ad1dc19349c407072cc48ba70dab86de45#n44 Signed-off-by: Richard Acayan <mailingradian@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 14 October 2022, 13:32:52 UTC
fe180a5 James Clark 05 October 2022, 14:05:08 UTC perf test: Fix test_arm_coresight.sh failures on Juno This test commonly fails on Arm Juno because the instruction interval is large enough to miss generating any samples for Perf in system-wide mode. Fix this by lowering the interval until a comfortable number of Perf instructions are generated. The test is still quick to run because only a small amount of trace is gathered. Before: sudo ./perf test coresight -vvv ... Recording trace with system wide mode Looking at perf.data file for dumping branch samples: Looking at perf.data file for reporting branch samples: Looking at perf.data file for instruction samples: CoreSight system wide testing: FAIL ... After: sudo ./perf test coresight -vvv ... Recording trace with system wide mode Looking at perf.data file for dumping branch samples: Looking at perf.data file for reporting branch samples: Looking at perf.data file for instruction samples: CoreSight system wide testing: PASS ... Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20221005140508.1537277-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 14 October 2022, 13:32:39 UTC
f21cb52 Namhyung Kim 11 October 2022, 05:28:08 UTC perf stat: Support old kernels for bperf cgroup counting The recent change in the cgroup will break the backward compatiblity in the BPF program. It should support both old and new kernels using BPF CO-RE technique. Like the task_struct->__state handling in the offcpu analysis, we can check the field name in the cgroup struct. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Song Liu <songliubraving@fb.com> Cc: Tejun Heo <tj@kernel.org> Cc: bpf@vger.kernel.org Cc: cgroups@vger.kernel.org Cc: zefan li <lizefan.x@bytedance.com> Link: http://lore.kernel.org/lkml/20221011052808.282394-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 14 October 2022, 13:29:05 UTC
70be49f Helge Deller 14 October 2022, 08:18:53 UTC parisc: Fix userspace graphics card breakage due to pgtable special bit Commit df24e1783e6e ("parisc: Add vDSO support") introduced the vDSO support, for which a _PAGE_SPECIAL page table flag was needed. Since we wanted to keep every page table entry in 32-bits, this patch re-used the existing - but yet unused - _PAGE_DMB flag (which triggers a hardware break if a page is accessed) to store the special bit. But when graphics card memory is mmapped into userspace, the kernel uses vm_iomap_memory() which sets the the special flag. So, with the DMB bit set, every access to the graphics memory now triggered a hardware exception and segfaulted the userspace program. Fix this breakage by dropping the DMB bit when writing the page protection bits to the CPU TLB. In addition this patch adds a small optimization: if huge pages aren't configured (which is at least the case for 32-bit kernels), then the special bit is stored in the hpage (HUGE PAGE) bit instead. That way we can skip to reset the DMB bit. Fixes: df24e1783e6e ("parisc: Add vDSO support") Cc: <stable@vger.kernel.org> # 5.18+ Signed-off-by: Helge Deller <deller@gmx.de> 14 October 2022, 08:45:12 UTC
aca7c13 Helge Deller 14 October 2022, 08:13:55 UTC parisc: fbdev/stifb: Align graphics memory size to 4MB Independend of the current graphics resolution, adjust the reported graphics card memory size to the next 4MB boundary. This fixes the fbtest program which expects a naturally aligned size. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> 14 October 2022, 08:45:12 UTC
9c9155a Linus Torvalds 14 October 2022, 04:56:34 UTC Merge tag 'drm-next-2022-10-14' of git://anongit.freedesktop.org/drm/drm Pull more drm updates from Dave Airlie: "Round of fixes for the merge window stuff, bunch of amdgpu and i915 changes, this should have the gcc11 warning fix, amongst other changes. amdgpu: - DC mutex fix - DC SubVP fixes - DCN 3.2.x fixes - DCN 3.1.x fixes - SDMA 6.x fixes - Enable DPIA for 3.1.4 - VRR fixes - VRAM BO swapping fix - Revert dirty fb helper change - SR-IOV suspend/resume fixes - Work around GCC array bounds check fail warning - UMC 8.10 fixes - Misc fixes and cleanups i915: - Round to closest in g4x+ HDMI clock readout - Update MOCS table for EHL - Fix PSR_IMR/IIR field handling - Fix watermark calculations for gen12+/DG2 modifiers - Reject excessive dotclocks early - Fix revocation of non-persistent contexts - Handle migration for dpt - Fix display problems after resume - Allow control over the flags when migrating - Consider DG2_RC_CCS_CC when migrating buffers" * tag 'drm-next-2022-10-14' of git://anongit.freedesktop.org/drm/drm: (110 commits) drm/amd/display: Add HUBP surface flip interrupt handler drm/i915/display: consider DG2_RC_CCS_CC when migrating buffers drm/i915: allow control over the flags when migrating drm/amd/display: Simplify bool conversion drm/amd/display: fix transfer function passed to build_coefficients() drm/amd/display: add a license to cursor_reg_cache.h drm/amd/display: make virtual_disable_link_output static drm/amd/display: fix indentation in dc.c drm/amd/display: make dcn32_split_stream_for_mpc_or_odm static drm/amd/display: fix build error on arm64 drm/amd/display: 3.2.207 drm/amd/display: Clean some DCN32 macros drm/amdgpu: Add poison mode query for umc v8_10_0 drm/amdgpu: Update umc v8_10_0 headers drm/amdgpu: fix coding style issue for mca notifier drm/amdgpu: define convert_error_address for umc v8.7 drm/amdgpu: define RAS convert_error_address API drm/amdgpu: remove check for CE in RAS error address query drm/i915: Fix display problems after resume drm/amd/display: fix array-bounds error in dc_stream_remove_writeback() [take 2] ... 14 October 2022, 04:56:34 UTC
a521fc3 Linus Torvalds 14 October 2022, 04:25:57 UTC Merge tag 'block-6.1-2022-10-13' of git://git.kernel.dk/linux Pull more block updates from Jens Axboe: "Fixes that ended up landing later than the initial block pull request. Nothing really major in here: - NVMe pull request via Christoph: - add NVME_QUIRK_BOGUS_NID for Lexar NM760 (Abhijit) - add NVME_QUIRK_NO_DEEPEST_PS to avoid the deepest sleep state on ZHITAI TiPro5000 SSDs (Xi Ruoyao) - fix possible hang caused during ctrl deletion (Sagi Grimberg) - fix possible hang in live ns resize with ANA access (Sagi Grimberg) - Proactively avoid a sign extension issue with the queue flags (Brian) - Regression fix for hidden disks (Christoph) - Update OPAL maintainers entry (Jonathan) - blk-wbt regression initialization fix (Yu)" * tag 'block-6.1-2022-10-13' of git://git.kernel.dk/linux: nvme-multipath: fix possible hang in live ns resize with ANA access nvme-pci: avoid the deepest sleep state on ZHITAI TiPro5000 SSDs nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM760 nvme-tcp: fix possible hang caused during ctrl deletion nvme-rdma: fix possible hang caused during ctrl deletion block: fix leaking minors of hidden disks block: avoid sign extend problem with default queue flags mask blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init() block: Remove the repeat word 'can' MAINTAINERS: Update SED-Opal Maintainers 14 October 2022, 04:25:57 UTC
c98c70e Linus Torvalds 14 October 2022, 04:15:30 UTC Merge tag 'io_uring-6.1-2022-10-13' of git://git.kernel.dk/linux Pull more io_uring updates from Jens Axboe: "A collection of fixes that ended up either being later than the initial pull, or dependent on multiple branches (6.0-late being one of them) and hence deferred purposely. This contains: - Cleanup fixes for the single submitter late 6.0 change, which we pushed to 6.1 to keep the 6.0 changes small (Dylan, Pavel) - Fix for IORING_OP_CONNECT not handling -EINPROGRESS correctly (me) - Ensure that the zc sendmsg variant gets audited correctly (me) - Regression fix from this merge window where kiocb_end_write() doesn't always gets called, which can cause issues with fs freezing (me) - Registered files SCM handling fix (Pavel) - Regression fix for big sqe dumping in fdinfo (Pavel) - Registered buffers accounting fix (Pavel) - Remove leftover notification structures, we killed them off late in 6.0 (Pavel) - Minor optimizations (Pavel) - Cosmetic variable shadowing fix (Stefan)" * tag 'io_uring-6.1-2022-10-13' of git://git.kernel.dk/linux: io_uring/rw: ensure kiocb_end_write() is always called io_uring: fix fdinfo sqe offsets calculation io_uring: local variable rw shadows outer variable in io_write io_uring/opdef: remove 'audit_skip' from SENDMSG_ZC io_uring: optimise locking for local tw with submit_wait io_uring: remove redundant memory barrier in io_req_local_work_add io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT io_uring: remove notif leftovers io_uring: correct pinned_vm accounting io_uring/af_unix: defer registered files gc to io_uring release io_uring: limit registration w/ SINGLE_ISSUER io_uring: remove io_register_submitter io_uring: simplify __io_uring_add_tctx_node 14 October 2022, 04:15:30 UTC
ab0c23b Conor Dooley 11 October 2022, 16:07:45 UTC MAINTAINERS: add RISC-V's patchwork The RISC-V patchwork instance on kernel.org has had some necromancy performed on it & will be used going forward. The statuses that are intended to be used are: - New: No action has been taken yet - Under Review: The maintainer is waiting for review comments from others - Changes Requested: Either the maintainer or a reviewer requested changes in the patch. The patch author is expected to submit a new version - Superseded: There's a new version of the patch available - Not Applicable: The patch is not intended for the RISC-V tree - Accepted: The patch has been applied - Rejected: The patch has been rejected, with reasons stated in an email Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221011160744.2167025-1-conor@kernel.org/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 13 October 2022, 23:35:25 UTC
fc3523a Dave Airlie 13 October 2022, 21:47:25 UTC Merge tag 'amd-drm-fixes-6.1-2022-10-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-fixes-6.1-2022-10-12: amdgpu: - DC mutex fix - DC SubVP fixes - DCN 3.2.x fixes - DCN 3.1.x fixes - SDMA 6.x fixes - Enable DPIA for 3.1.4 - VRR fixes - VRAM BO swapping fix - Revert dirty fb helper change - SR-IOV suspend/resume fixes - Work around GCC array bounds check fail warning - UMC 8.10 fixes - Misc fixes and cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221012162650.8810-1-alexander.deucher@amd.com 13 October 2022, 21:47:25 UTC
e55978a Dave Airlie 13 October 2022, 21:46:50 UTC Merge tag 'drm-intel-next-fixes-2022-10-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Fix revocation of non-persistent contexts (Tvrtko Ursulin) - Handle migration for dpt (Matthew Auld) - Fix display problems after resume (Thomas Hellström) - Allow control over the flags when migrating (Matthew Auld) - Consider DG2_RC_CCS_CC when migrating buffers (Matthew Auld) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y0gK9QmCmktLLzqp@tursulin-desk 13 October 2022, 21:46:50 UTC
e5f12a3 Ke Sun 08 October 2022, 07:13:21 UTC rtc: rv3028: Fix codestyle errors Compiler warnings： drivers/rtc/rtc-rv3028.c: In function 'rv3028_param_set': drivers/rtc/rtc-rv3028.c:559:20: warning: statement will never be executed [-Wswitch-unreachable] 559 | u8 mode; | ^~~~ drivers/rtc/rtc-rv3028.c: In function 'rv3028_param_get': drivers/rtc/rtc-rv3028.c:526:21: warning: statement will never be executed [-Wswitch-unreachable] 526 | u32 value; | ^~~~~ Fix it by moving the variable declaration to the beginning of the function. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-rtc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: Ke Sun <sunke@kylinos.cn> Link: https://lore.kernel.org/r/20221008071321.1799971-1-sunke@kylinos.cn Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> 13 October 2022, 21:36:52 UTC
4919d3e Rafael J. Wysocki 12 October 2022, 18:07:01 UTC rtc: cmos: Fix event handler registration ordering issue Because acpi_install_fixed_event_handler() enables the event automatically on success, it is incorrect to call it before the handler routine passed to it is ready to handle events. Unfortunately, the rtc-cmos driver does exactly the incorrect thing by calling cmos_wake_setup(), which passes rtc_handler() to acpi_install_fixed_event_handler(), before cmos_do_probe(), because rtc_handler() uses dev_get_drvdata() to get to the cmos object pointer and the driver data pointer is only populated in cmos_do_probe(). This leads to a NULL pointer dereference in rtc_handler() on boot if the RTC fixed event happens to be active at the init time. To address this issue, change the initialization ordering of the driver so that cmos_wake_setup() is always called after a successful cmos_do_probe() call. While at it, change cmos_pnp_probe() to call cmos_do_probe() after the initial if () statement used for computing the IRQ argument to be passed to cmos_do_probe() which is cleaner than calling it in each branch of that if () (local variable "irq" can be of type int, because it is passed to that function as an argument of type int). Note that commit 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0") caused this issue to affect a larger number of systems, because previously it only affected systems with ACPI_FADT_LOW_POWER_S0 set, but it is present regardless of that commit. Fixes: 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0") Fixes: a474aaedac99 ("rtc-cmos: move wake setup from ACPI glue into RTC driver") Link: https://lore.kernel.org/linux-acpi/20221010141630.zfzi7mk7zvnmclzy@techsingularity.net/ Reported-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Mel Gorman <mgorman@techsingularity.net> Link: https://lore.kernel.org/r/5629262.DvuYhMxLoT@kreacher Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> 13 October 2022, 21:27:52 UTC
9cc205e Maciej W. Rozycki 22 September 2022, 21:56:06 UTC RISC-V: Make port I/O string accessors actually work Fix port I/O string accessors such as `insb', `outsb', etc. which use the physical PCI port I/O address rather than the corresponding memory mapping to get at the requested location, which in turn breaks at least accesses made by our parport driver to a PCIe parallel port such as: PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20 parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] causing a memory access fault: Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000001008 Oops [#1] Modules linked in: CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23 Hardware name: SiFive HiFive Unmatched A00 (DT) epc : parport_pc_fifo_write_block_pio+0x266/0x416 ra : parport_pc_fifo_write_block_pio+0xb4/0x416 epc : ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60 gp : ffffffff80fa2700 tp : ffffffd882b1e900 t0 : ffffffd883d0b000 t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0 s1 : 0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000 a2 : ffffffd883d0a010 a3 : 0000000000000023 a4 : 00000000ffff8fbb a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000 s2 : ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50 s5 : 0000000000001008 s6 : 0000000000000008 s7 : ffffffd883d0a000 s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000 s11: 0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930 t5 : 0000000000001000 t6 : 0000000000040000 status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f [<ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200 [<ffffffff8053bbc0>] parport_write+0x46/0xf8 [<ffffffff8050530e>] lp_write+0x158/0x2d2 [<ffffffff80185716>] vfs_write+0x8e/0x2c2 [<ffffffff80185a74>] ksys_write+0x52/0xc2 [<ffffffff80185af2>] sys_write+0xe/0x16 [<ffffffff80003770>] ret_from_syscall+0x0/0x2 ---[ end trace 0000000000000000 ]--- For simplicity address the problem by adding PCI_IOBASE to the physical address requested in the respective wrapper macros only, observing that the raw accessors such as `__insb', `__outsb', etc. are not supposed to be used other than by said macros. Remove the cast to `long' that is no longer needed on `addr' now that it is used as an offset from PCI_IOBASE and add parentheses around `addr' needed for predictable evaluation in macro expansion. No need to make said adjustments in separate changes given that current code is gravely broken and does not ever work. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: fab957c11efe2 ("RISC-V: Atomic and Locking Code") Cc: stable@vger.kernel.org # v4.15+ Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209220223080.29493@angie.orcam.me.uk Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 13 October 2022, 21:27:00 UTC
4c540c9 Palmer Dabbelt 13 October 2022, 21:02:36 UTC RISC-V: Add mvendorid, marchid, and mimpid to /proc/cpuinfo output I'm merging this in as a single commit as it's a dependency for some other work. * commit '3baca1a4d490484fcd555413f1fec85b2e071912': RISC-V: Add mvendorid, marchid, and mimpid to /proc/cpuinfo output 13 October 2022, 21:02:36 UTC
8aeb7b1 Palmer Dabbelt 13 October 2022, 19:49:12 UTC RISC-V: Make mmap() with PROT_WRITE imply PROT_READ Commit 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid") made mmap() reject mappings with only PROT_WRITE set in an attempt to fix an observed inconsistency in behavior when attempting to read from a PROT_WRITE-only mapping. The root cause of this behavior was actually that while RISC-V's protection_map maps VM_WRITE to readable PTE permissions (since write-only PTEs are considered reserved by the privileged spec), the page fault handler considered loads from VM_WRITE-only VMAs illegal accesses. Fix the underlying cause by handling faults in VM_WRITE-only VMAs (patch 1) and then re-enable use of mmap(PROT_WRITE) (patch 2), making RISC-V's behavior consistent with all other architectures that don't support write-only PTEs. * remotes/palmer/riscv-wonly: riscv: Allow PROT_WRITE-only mmap() riscv: Make VM_WRITE imply VM_READ Link: https://lore.kernel.org/r/20220915193702.2201018-1-abrestic@rivosinc.com/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 13 October 2022, 19:49:12 UTC
6d84c25 Linus Torvalds 13 October 2022, 19:22:42 UTC Merge tag 'devicetree-fixes-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fixes for Mediatek MT6370 binding - Merge the DT overlay maintainer entry to the main entry as Pantelis is not active and Frank is taking a step back * tag 'devicetree-fixes-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: MAINTAINERS: of: collapse overlay entry into main device tree entry dt-bindings: mfd: mt6370: fix the interrupt order of the charger in the example dt-bindings: leds: mt6370: Fix MT6370 LED indicator DT warning 13 October 2022, 19:22:42 UTC
0981794 Linus Torvalds 13 October 2022, 19:19:18 UTC Merge tag 'mmc-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Add SD card quirk for broken discard MMC host: - renesas_sdhi: Fix clock rounding errors - sdhci-sprd: Fix minimum clock limit to detect cards - sdhci-tegra: Use actual clock rate for SW tuning correction" * tag 'mmc-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-sprd: Fix minimum clock limit mmc: sdhci-tegra: Use actual clock rate for SW tuning correction mmc: renesas_sdhi: Fix rounding errors mmc: core: Add SD card quirk for broken discard 13 October 2022, 19:19:18 UTC
c45fc91 Conor Dooley 29 July 2022, 11:11:17 UTC riscv: enable software resend of irqs The PLIC specification does not describe the interrupt pendings bits as read-write, only that they "can be read". To allow for retriggering of interrupts (and the use of the irq debugfs interface) enable HARDIRQS_SW_RESEND for RISC-V. Link: https://github.com/riscv/riscv-plic-spec/blob/master/riscv-plic.adoc#interrupt-pending-bits Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Marc Zyngier <maz@kernel.org> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Tested-by: Palmer Dabbelt <palmer@rivosinc.com> # on QEMU Reviewed-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/r/20220729111116.259146-1-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 13 October 2022, 18:28:01 UTC
5a5294f Palmer Dabbelt 28 September 2022, 13:18:07 UTC RISC-V: Re-enable counter access from userspace These counters were part of the ISA when we froze the uABI, removing them breaks userspace. Link: https://lore.kernel.org/all/YxEhC%2FmDW1lFt36J@aurel32.net/ Fixes: e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension") Tested-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220928131807.30386-1-palmer@rivosinc.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 13 October 2022, 18:18:39 UTC
a8616d2 Jisheng Zhang 24 September 2022, 07:07:37 UTC riscv: vdso: fix NULL deference in vdso_join_timens() when vfork Testing tools/testing/selftests/timens/vfork_exec.c got below kernel log: [ 6.838454] Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000000020 [ 6.842255] Oops [#1] [ 6.842871] Modules linked in: [ 6.844249] CPU: 1 PID: 64 Comm: vfork_exec Not tainted 6.0.0-rc3-rt15+ #8 [ 6.845861] Hardware name: riscv-virtio,qemu (DT) [ 6.848009] epc : vdso_join_timens+0xd2/0x110 [ 6.850097] ra : vdso_join_timens+0xd2/0x110 [ 6.851164] epc : ffffffff8000635c ra : ffffffff8000635c sp : ff6000000181fbf0 [ 6.852562] gp : ffffffff80cff648 tp : ff60000000fdb700 t0 : 3030303030303030 [ 6.853852] t1 : 0000000000000030 t2 : 3030303030303030 s0 : ff6000000181fc40 [ 6.854984] s1 : ff60000001e6c000 a0 : 0000000000000010 a1 : ffffffff8005654c [ 6.856221] a2 : 00000000ffffefff a3 : 0000000000000000 a4 : 0000000000000000 [ 6.858114] a5 : 0000000000000000 a6 : 0000000000000008 a7 : 0000000000000038 [ 6.859484] s2 : ff60000001e6c068 s3 : ff6000000108abb0 s4 : 0000000000000000 [ 6.860751] s5 : 0000000000001000 s6 : ffffffff8089dc40 s7 : ffffffff8089dc38 [ 6.862029] s8 : ffffffff8089dc30 s9 : ff60000000fdbe38 s10: 000000000000005e [ 6.863304] s11: ffffffff80cc3510 t3 : ffffffff80d1112f t4 : ffffffff80d1112f [ 6.864565] t5 : ffffffff80d11130 t6 : ff6000000181fa00 [ 6.865561] status: 0000000000000120 badaddr: 0000000000000020 cause: 000000000000000d [ 6.868046] [<ffffffff8008dc94>] timens_commit+0x38/0x11a [ 6.869089] [<ffffffff8008dde8>] timens_on_fork+0x72/0xb4 [ 6.870055] [<ffffffff80190096>] begin_new_exec+0x3c6/0x9f0 [ 6.871231] [<ffffffff801d826c>] load_elf_binary+0x628/0x1214 [ 6.872304] [<ffffffff8018ee7a>] bprm_execve+0x1f2/0x4e4 [ 6.873243] [<ffffffff8018f90c>] do_execveat_common+0x16e/0x1ee [ 6.874258] [<ffffffff8018f9c8>] sys_execve+0x3c/0x48 [ 6.875162] [<ffffffff80003556>] ret_from_syscall+0x0/0x2 [ 6.877484] ---[ end trace 0000000000000000 ]--- This is because the mm->context.vdso_info is NULL in vfork case. From another side, mm->context.vdso_info either points to vdso info for RV64 or vdso info for compat, there's no need to bloat riscv's mm_context_t, we can handle the difference when setup the additional page for vdso. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Suggested-by: Palmer Dabbelt <palmer@rivosinc.com> Fixes: 3092eb456375 ("riscv: compat: vdso: Add setup additional pages implementation") Link: https://lore.kernel.org/r/20220924070737.3048-1-jszhang@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 13 October 2022, 18:16:52 UTC
1a5a2cb Palmer Dabbelt 13 October 2022, 18:06:57 UTC Merge patch series "Use composable cache instead of L2 cache" Zong Li <zong.li@sifive.com> says: Since composable cache may be L3 cache if private L2 cache exists, we should use its original name "composable cache" to prevent confusion. This patchset contains the modification which is related to ccache, such as DT binding and EDAC driver. * b4-shazam-merge: riscv: Add cache information in AUX vector soc: sifive: ccache: define the macro for the register shifts soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes soc: sifive: ccache: reduce printing on init soc: sifive: ccache: determine the cache level from dts soc: sifive: ccache: Rename SiFive L2 cache to Composable cache. dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache Link: https://lore.kernel.org/r/20220913061817.22564-1-zong.li@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 13 October 2022, 18:07:13 UTC
da29dbc Greentime Hu 13 September 2022, 06:18:17 UTC riscv: Add cache information in AUX vector There are no standard CSR registers to provide cache information, the way for RISC-V is to get this information from DT. sysconf syscall could use them to get information of cache through AUX vector. The result of 'getconf -a|grep -i cache' as follows: LEVEL1_ICACHE_SIZE 32768 LEVEL1_ICACHE_ASSOC 2 LEVEL1_ICACHE_LINESIZE 64 LEVEL1_DCACHE_SIZE 32768 LEVEL1_DCACHE_ASSOC 4 LEVEL1_DCACHE_LINESIZE 64 LEVEL2_CACHE_SIZE 524288 LEVEL2_CACHE_ASSOC 8 LEVEL2_CACHE_LINESIZE 64 LEVEL3_CACHE_SIZE 4194304 LEVEL3_CACHE_ASSOC 16 LEVEL3_CACHE_LINESIZE 64 LEVEL4_CACHE_SIZE 0 LEVEL4_CACHE_ASSOC 0 LEVEL4_CACHE_LINESIZE 0 Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Zong Li <zong.li@sifive.com> Suggested-by: Zong Li <zong.li@sifive.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220913061817.22564-8-zong.li@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 13 October 2022, 18:06:56 UTC
afc7a58 Zong Li 13 September 2022, 06:18:16 UTC soc: sifive: ccache: define the macro for the register shifts Define the macro for the register shifts, it could make the code be more readable Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220913061817.22564-7-zong.li@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 13 October 2022, 18:06:55 UTC
696ab9b Ben Dooks 13 September 2022, 06:18:15 UTC soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes Use the pr_fmt() macro to prefix all the output with "CCACHE:" to avoid having to write it out each time, or make a large diff when the next change comes along. Signed-off-by: Ben Dooks <ben.dooks@sifive.com> Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220913061817.22564-6-zong.li@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 13 October 2022, 18:06:54 UTC
3fb787e Ben Dooks 13 September 2022, 06:18:14 UTC soc: sifive: ccache: reduce printing on init The driver prints out 6 lines on startup, which can easily be redcued to two lines without losing any information. Note, to make the types work better, uint64_t has been replaced with ULL to make the unsigned long long match the format in the print statement. Signed-off-by: Ben Dooks <ben.dooks@sifive.com> Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220913061817.22564-5-zong.li@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 13 October 2022, 18:06:53 UTC
95f196f Zong Li 13 September 2022, 06:18:13 UTC soc: sifive: ccache: determine the cache level from dts Composable cache could be L2 or L3 cache, use 'cache-level' property of device node to determine the level. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220913061817.22564-4-zong.li@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 13 October 2022, 18:06:52 UTC
ca120a7 Greentime Hu 13 September 2022, 06:18:12 UTC soc: sifive: ccache: Rename SiFive L2 cache to Composable cache. Since composable cache may be L3 cache if there is a L2 cache, we should use its original name composable cache to prevent confusion. There are some new lines were generated due to adding the compatible "sifive,ccache0" into ID table and indent requirement. The sifive L2 has been renamed to sifive CCACHE, EDAC driver needs to apply the change as well. Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Zong Li <zong.li@sifive.com> Co-developed-by: Zong Li <zong.li@sifive.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220913061817.22564-3-zong.li@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 13 October 2022, 18:06:51 UTC
44dce4b Zong Li 13 September 2022, 06:18:11 UTC dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache Since composable cache may be L3 cache if private L2 cache exists, we should use its original name Composable cache to prevent confusion. Signed-off-by: Zong Li <zong.li@sifive.com> Suggested-by: Conor Dooley <conor.dooley@microchip.com> Suggested-by: Ben Dooks <ben.dooks@sifive.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220913061817.22564-2-zong.li@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 13 October 2022, 18:06:50 UTC
f2b220e Linus Torvalds 13 October 2022, 17:58:32 UTC Merge tag 'docs-6.1-2' of git://git.lwn.net/linux Pull documentation fixes from Jonathan Corbet: "A handful of relatively simple documentation fixes, plus a set of patches catching the Chinese translation up with the front-page rework" * tag 'docs-6.1-2' of git://git.lwn.net/linux: Documentation: rtla: Correct command line example docs/zh_CN: add a man-pages link to zh_CN/index.rst docs/zh_CN: Rewrite the Chinese translation front page docs/zh_CN: add zh_CN/arch.rst docs/zh_CN: promote the title of zh_CN/process/index.rst docs/zh_CN: Update the translation of page_owner to 6.0-rc7 docs/zh_CN: Update the translation of ksm to 6.0-rc7 docs/howto: Replace abundoned URL of gmane.org Documentation: ubifs: Fix compression idiom Documentation/mm/page_owner.rst: delete frequently changing experimental data docs/zh_CN: Fix build warning docs: ftrace: Correct access mode 13 October 2022, 17:58:32 UTC
66ae043 Linus Torvalds 13 October 2022, 17:51:01 UTC Merge tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, and wifi. Current release - regressions: - Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs", it may cause crashes when the qdisc is reconfigured - inet: ping: fix splat due to packet allocation refactoring in inet - tcp: clean up kernel listener's reqsk in inet_twsk_purge(), fix UAF due to races when per-netns hash table is used Current release - new code bugs: - eth: adin1110: check in netdev_event that netdev belongs to driver - fixes for PTR_ERR() vs NULL bugs in driver code, from Dan and co. Previous releases - regressions: - ipv4: handle attempt to delete multipath route when fib_info contains an nh reference, avoid oob access - wifi: fix handful of bugs in the new Multi-BSSID code - wifi: mt76: fix rate reporting / throughput regression on mt7915 and newer, fix checksum offload - wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue (other cases) - wifi: mac80211: do not drop packets smaller than the LLC-SNAP header on fast-rx Previous releases - always broken: - ieee802154: don't warn zero-sized raw_sendmsg() - ipv6: ping: fix wrong checksum for large frames - mctp: prevent double key removal and unref - tcp/udp: fix memory leaks and races around IPV6_ADDRFORM - hv_netvsc: fix race between VF offering and VF association message Misc: - remove -Warray-bounds silencing in the drivers, compilers fixed" * tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits) sunhme: fix an IS_ERR() vs NULL check in probe net: marvell: prestera: fix a couple NULL vs IS_ERR() checks kcm: avoid potential race in kcm_tx_work tcp: Clean up kernel listener's reqsk in inet_twsk_purge() net: phy: micrel: Fixes FIELD_GET assertion openvswitch: add nf_ct_is_confirmed check before assigning the helper tcp: Fix data races around icsk->icsk_af_ops. ipv6: Fix data races around sk->sk_prot. tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct(). udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM). tcp/udp: Fix memory leak in ipv6_renew_options(). mctp: prevent double key removal and unref selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1 netfilter: rpfilter/fib: Populate flowic_l3mdev field selftests: netfilter: Test reverse path filtering net/mlx5: Make ASO poll CQ usable in atomic context tcp: cdg: allow tcp_cdg_release() to be called multiple times inet: ping: fix recent breakage ipv6: ping: fix wrong checksum for large frames net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused ports ... 13 October 2022, 17:51:01 UTC
d6f04f2 Linus Torvalds 13 October 2022, 17:44:36 UTC Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio fixes from Michael Tsirkin: - Fix a regression in virtio pci on power - Add a reviewer for ifcvf * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/ifcvf: add reviewer virtio_pci: use irq to detect interrupt support 13 October 2022, 17:44:36 UTC
aa41478 Linus Torvalds 13 October 2022, 17:36:57 UTC Merge tag 'trace-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Found that the synthetic events were using strlen/strscpy() on values that could have come from userspace, and that is bad. Consolidate the string logic of kprobe and eprobe and extend it to the synthetic events to safely process string addresses. - Clean up content of text dump in ftrace_bug() where the output does not make char reads into signed and sign extending the byte output. - Fix some kernel docs in the ring buffer code. * tag 'trace-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Fix reading strings from synthetic events tracing: Add "(fault)" name injection to kernel probes tracing: Move duplicate code of trace_kprobe/eprobe.c into header ring-buffer: Fix kernel-doc ftrace: Fix char print issue in print_ip_ins() 13 October 2022, 17:36:57 UTC
back to top