Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
4a78921 Linus Torvalds 22 May 2016, 04:44:51 UTC x86 uaccess: Introduce __put_user_goto This is finally the actual reason for the odd error handling in the "unsafe_get/put_user()" functions, introduced over three years ago. Using a "jump to error label" interface is somewhat odd, but very convenient as a programming interface, and more importantly, it fits very well with simply making the target be the exception handler address directly from the inline asm. The reason it took over three years to actually do this? We need "asm goto" support for it, which only became the default on x86 last year. It's now been a year that we've forced asm goto support (see commit e501ce957a78 "x86: Force asm-goto"), and so let's just do it here too. [ Side note: this commit was originally done back in 2016. The above commentary about timing is obviously about it only now getting merged into my real upstream tree - Linus ] Sadly, gcc still only supports "asm goto" with asms that do not have any outputs, so we are limited to only the put_user case for this. Maybe in several more years we can do the get_user case too. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 January 2019, 02:00:49 UTC
594cc25 Linus Torvalds 04 January 2019, 20:56:09 UTC make 'user_access_begin()' do 'access_ok()' Originally, the rule used to be that you'd have to do access_ok() separately, and then user_access_begin() before actually doing the direct (optimized) user access. But experience has shown that people then decide not to do access_ok() at all, and instead rely on it being implied by other operations or similar. Which makes it very hard to verify that the access has actually been range-checked. If you use the unsafe direct user accesses, hardware features (either SMAP - Supervisor Mode Access Protection - on x86, or PAN - Privileged Access Never - on ARM) do force you to use user_access_begin(). But nothing really forces the range check. By putting the range check into user_access_begin(), we actually force people to do the right thing (tm), and the range check vill be visible near the actual accesses. We have way too long a history of people trying to avoid them. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 January 2019, 20:56:09 UTC
0b2c8f8 Linus Torvalds 04 January 2019, 18:23:10 UTC i915: fix missing user_access_end() in page fault exception case When commit fddcd00a49e9 ("drm/i915: Force the slow path after a user-write error") unified the error handling for various user access problems, it didn't do the user_access_end() that is needed for the unsafe_put_user() case. It's not a huge deal: a missed user_access_end() will only mean that SMAP protection isn't active afterwards, and for the error case we'll be returning to user mode soon enough anyway. But it's wrong, and adding the proper user_access_end() is trivial enough (and doing it for the other error cases where it isn't needed doesn't hurt). I noticed it while doing the same prep-work for changing user_access_begin() that precipitated the access_ok() changes in commit 96d4f267e40f ("Remove 'type' argument from access_ok() function"). Fixes: fddcd00a49e9 ("drm/i915: Force the slow path after a user-write error") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@kernel.org # v4.20 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 January 2019, 18:23:10 UTC
4caf4eb Linus Torvalds 04 January 2019, 17:58:25 UTC Fix access_ok() fallout for sparc32 and powerpc These two architectures actually had an intentional use of the 'type' argument to access_ok() just to avoid warnings. I had actually noticed the powerpc one, but forgot to then fix it up. And I missed the sparc32 case entirely. This is hopefully all of it. Reported-by: Mathieu Malaterre <malat@debian.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: 96d4f267e40f ("Remove 'type' argument from access_ok() function") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 January 2019, 17:58:25 UTC
96d4f26 Linus Torvalds 04 January 2019, 02:57:57 UTC Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 January 2019, 02:57:57 UTC
135143b Linus Torvalds 03 January 2019, 22:33:46 UTC Merge tag 'locks-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux Pull file locking bugfix from Jeff Layton: "This is a one-line fix for a bug that syzbot turned up in the new patches to mitigate the thundering herd when a lock is released" * tag 'locks-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: locks: fix error in locks_move_blocks() 03 January 2019, 22:33:46 UTC
810574c Linus Torvalds 03 January 2019, 21:08:00 UTC Merge tag 'sound-fix-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Among a few HD-audio fixes, the only significant one is the regression fix on some machines like Dell XPS due to the default binding changes. We ended up reverting the whole since the fix for ASoC HD-audio driver won't be available immediately" * tag 'sound-fix-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Revert DSP detection on legacy HD-audio driver ALSA: hda/tegra: clear pending irq handlers ALSA: hda/realtek: Enable the headset mic auto detection for ASUS laptops 03 January 2019, 21:08:00 UTC
43d86ee Linus Torvalds 03 January 2019, 20:53:47 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: "Several fixes here. Basically split down the line between newly introduced regressions and long existing problems: 1) Double free in tipc_enable_bearer(), from Cong Wang. 2) Many fixes to nf_conncount, from Florian Westphal. 3) op->get_regs_len() can throw an error, check it, from Yunsheng Lin. 4) Need to use GFP_ATOMIC in *_add_hash_mac_address() of fsl/fman driver, from Scott Wood. 5) Inifnite loop in fib_empty_table(), from Yue Haibing. 6) Use after free in ax25_fillin_cb(), from Cong Wang. 7) Fix socket locking in nr_find_socket(), also from Cong Wang. 8) Fix WoL wakeup enable in r8169, from Heiner Kallweit. 9) On 32-bit sock->sk_stamp is not thread-safe, from Deepa Dinamani. 10) Fix ptr_ring wrap during queue swap, from Cong Wang. 11) Missing shutdown callback in hinic driver, from Xue Chaojing. 12) Need to return NULL on error from ip6_neigh_lookup(), from Stefano Brivio. 13) BPF out of bounds speculation fixes from Daniel Borkmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) ipv6: Consider sk_bound_dev_if when binding a socket to an address ipv6: Fix dump of specific table with strict checking bpf: add various test cases to selftests bpf: prevent out of bounds speculation on pointer arithmetic bpf: fix check_map_access smin_value test when pointer contains offset bpf: restrict unknown scalars of mixed signed bounds for unprivileged bpf: restrict stack pointer arithmetic for unprivileged bpf: restrict map value pointer arithmetic for unprivileged bpf: enable access to ax register also from verifier rewrite bpf: move tmp variable into ax register in interpreter bpf: move {prev_,}insn_idx into verifier env isdn: fix kernel-infoleak in capi_unlocked_ioctl ipv6: route: Fix return value of ip6_neigh_lookup() on neigh_create() error net/hamradio/6pack: use mod_timer() to rearm timers net-next/hinic:add shutdown callback net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT ip: validate header length on virtual device xmit tap: call skb_probe_transport_header after setting skb->dev ptr_ring: wrap back ->producer in __ptr_ring_swap_queue() net: rds: remove unnecessary NULL check ... 03 January 2019, 20:53:47 UTC
c5ee066 David Ahern 03 January 2019, 02:57:09 UTC ipv6: Consider sk_bound_dev_if when binding a socket to an address IPv6 does not consider if the socket is bound to a device when binding to an address. The result is that a socket can be bound to eth0 and then bound to the address of eth1. If the device is a VRF, the result is that a socket can only be bound to an address in the default VRF. Resolve by considering the device if sk_bound_dev_if is set. This problem exists from the beginning of git history. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 January 2019, 04:16:37 UTC
7315587 David Ahern 03 January 2019, 02:26:13 UTC ipv6: Fix dump of specific table with strict checking Dump of a specific table with strict checking enabled is looping. The problem is that the end of the table dump is not marked in the cb. When dumping a specific table, cb args 0 and 1 are not used (they are the hash index and entry with an hash table index when dumping all tables). Re-use args[0] to hold a 'done' flag for the specific table dump. Fixes: 13e38901d46ca ("net/ipv6: Plumb support for filtering route dumps") Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 January 2019, 04:15:43 UTC
645ff1e Linus Torvalds 03 January 2019, 02:56:59 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A tiny pull request this merge window unfortunately, should get more material in for the next release: - new driver for Raspberry Pi's touchscreen (firmware interface) - miscellaneous input driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G Input: atmel_mxt_ts - don't try to free unallocated kernel memory Input: drv2667 - fix indentation issues Input: touchscreen - fix coding style issue Input: add official Raspberry Pi's touchscreen driver Input: nomadik-ske-keypad - fix a loop timeout test Input: rotary-encoder - don't log EPROBE_DEFER to kernel log Input: olpc_apsp - remove set but not used variable 'np' Input: olpc_apsp - enable the SP clock Input: olpc_apsp - check FIFO status on open(), not probe() Input: olpc_apsp - drop CONFIG_OLPC dependency clk: mmp2: add SP clock dt-bindings: marvell,mmp2: Add clock id for the SP clock Input: ad7879 - drop platform data support 03 January 2019, 02:56:59 UTC
d548e65 Linus Torvalds 03 January 2019, 02:54:45 UTC Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio/vhost updates from Michael Tsirkin: "Features, fixes, cleanups: - discard in virtio blk - misc fixes and cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: correct the related warning message vhost: split structs into a separate header file virtio: remove deprecated VIRTIO_PCI_CONFIG() vhost/vsock: switch to a mutex for vhost_vsock_hash virtio_blk: add discard and write zeroes support 03 January 2019, 02:54:45 UTC
77d0b19 Linus Torvalds 03 January 2019, 02:49:58 UTC Merge tag 'for-4.21/block-20190102' of git://git.kernel.dk/linux-block Pull more block updates from Jens Axboe: - Dead code removal for loop/sunvdc (Chengguang) - Mark BIDI support for bsg as deprecated, logging a single dmesg warning if anyone is actually using it (Christoph) - blkcg cleanup, killing a dead function and making the tryget_closest variant easier to read (Dennis) - Floppy fixes, one fixing a regression in swim3 (Finn) - lightnvm use-after-free fix (Gustavo) - gdrom leak fix (Wenwen) - a set of drbd updates (Lars, Luc, Nathan, Roland) * tag 'for-4.21/block-20190102' of git://git.kernel.dk/linux-block: (28 commits) block/swim3: Fix regression on PowerBook G3 block/swim3: Fix -EBUSY error when re-opening device after unmount block/swim3: Remove dead return statement block/amiflop: Don't log error message on invalid ioctl gdrom: fix a memory leak bug lightnvm: pblk: fix use-after-free bug block: sunvdc: remove redundant code block: loop: remove redundant code bsg: deprecate BIDI support in bsg blkcg: remove unused __blkg_release_rcu() blkcg: clean up blkg_tryget_closest() drbd: Change drbd_request_detach_interruptible's return type to int drbd: Avoid Clang warning about pointless switch statment drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire") drbd: skip spurious timeout (ping-timeo) when failing promote drbd: don't retry connection if peers do not agree on "authentication" settings drbd: fix print_st_err()'s prototype to match the definition drbd: avoid spurious self-outdating with concurrent disconnect / down drbd: do not block when adjusting "disk-options" while IO is frozen drbd: fix comment typos ... 03 January 2019, 02:49:58 UTC
b79f9f9 Linus Torvalds 03 January 2019, 02:47:56 UTC Merge tag 'for-4.21/libata-20190102' of git://git.kernel.dk/linux-block Pull libata fix from Jens Axboe: "This libata change missed the original libata pull request. Just a single fix in here, fixing a missed reference drop" * tag 'for-4.21/libata-20190102' of git://git.kernel.dk/linux-block: ata: pata_macio: add of_node_put() 03 January 2019, 02:47:56 UTC
0f2107d Linus Torvalds 03 January 2019, 02:45:50 UTC Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk updates from Stephen Boyd: "One more patch to generalize a set of DT binding defines now before -rc1 comes out. This way the SoC DTS files can use the proper defines from a stable tag" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: imx8qxp: make the name of clock ID generic 03 January 2019, 02:45:50 UTC
01766d2 Linus Torvalds 03 January 2019, 02:43:57 UTC Merge tag 'devprop-4.21-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fixes from Rafael Wysocki: "Fix two potential NULL pointer dereferences found by Coverity in the software nodes code introduced recently (Colin Ian King)" * tag 'devprop-4.21-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: drivers: base: swnode: check if swnode is NULL before dereferencing it drivers: base: swnode: check if pointer p is NULL before dereferencing it 03 January 2019, 02:43:57 UTC
35ddb06 Linus Torvalds 03 January 2019, 02:41:38 UTC Merge tag 'mailbox-v4.21' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - Introduce device-managed registration devm_mbox_controller_un/register and convert drivers to use it - Introduce flush api to support clients that must busy-wait in atomic context - Support multiple controllers per device - Hi3660: a bugfix and constify ops structure - TI-MsgMgr: off by one bugfix. - BCM: switch to spdx license - Tegra-HSP: support for shared mailboxes and suspend/resume. * tag 'mailbox-v4.21' of git://git.linaro.org/landing-teams/working/fujitsu/integration: (30 commits) mailbox: tegra-hsp: Use device-managed registration API mailbox: tegra-hsp: use devm_kstrdup_const() mailbox: tegra-hsp: Add suspend/resume support mailbox: tegra-hsp: Add support for shared mailboxes dt-bindings: tegra186-hsp: Add shared mailboxes mailbox: Allow multiple controllers per device mailbox: Support blocking transfers in atomic context mailbox: ti-msgmgr: Use device-managed registration API mailbox: stm32-ipcc: Use device-managed registration API mailbox: rockchip: Use device-managed registration API mailbox: qcom-apcs: Use device-managed registration API mailbox: platform-mhu: Use device-managed registration API mailbox: omap: Use device-managed registration API mailbox: mtk-cmdq: Remove needless devm_kfree() calls mailbox: mtk-cmdq: Use device-managed registration API mailbox: xgene-slimpro: Use device-managed registration API mailbox: sti: Use device-managed registration API mailbox: altera: Use device-managed registration API mailbox: imx: Use device-managed registration API mailbox: hi6220: Use device-managed registration API ... 03 January 2019, 02:41:38 UTC
6aa293d Linus Torvalds 03 January 2019, 02:39:22 UTC Merge branch 'for-linus-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - DISCARD support for our block device driver - Many TLB flush optimizations - Various smaller fixes - And most important, Anton agreed to help me maintaining UML * 'for-linus-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Remove obsolete reenable_XX calls um: writev needs <sys/uio.h> Add Anton Ivanov to UML maintainers um: remove redundant generic-y um: Optimize Flush TLB for force/fork case um: Avoid marking pages with "changed protection" um: Skip TLB flushing where not needed um: Optimize TLB operations v2 um: Remove unnecessary faulted check in uaccess.c um: Add support for DISCARD in the UBD Driver um: Remove unsafe printks from the io thread um: Clean-up command processing in UML UBD driver um: Switch to block-mq constants in the UML UBD driver um: Make GCOV depend on !KCOV um: Include sys/uio.h to have writev() um: Add HAVE_DEBUG_BUGVERBOSE um: Update maintainers file entry 03 January 2019, 02:39:22 UTC
04a17ed Linus Torvalds 03 January 2019, 02:37:01 UTC Merge tag 's390-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: - A larger update for the zcrypt / AP bus code: + Update two inline assemblies in the zcrypt driver to make gcc happy + Add a missing reply code for invalid special commands for zcrypt + Allow AP device reset to be triggered from user space + Split the AP scan function into smaller, more readable functions - Updates for vfio-ccw and vfio-ap + Add maintainers and reviewer for vfio-ccw + Include facility.h in vfio_ap_drv.c to avoid fragile include chain + Simplicy vfio-ccw state machine - Use the common code version of bust_spinlocks - Make use of the DEFINE_SHOW_ATTRIBUTE - Fix three incorrect file permissions in the DASD driver - Remove bit spin-lock from the PCI interrupt handler - Fix GFP_ATOMIC vs GFP_KERNEL in the PCI code * tag 's390-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: rework ap scan bus code s390/zcrypt: make sysfs reset attribute trigger queue reset s390/pci: fix sleeping in atomic during hotplug s390/pci: remove bit_lock usage in interrupt handler s390/drivers: fix proc/debugfs file permissions s390: convert to DEFINE_SHOW_ATTRIBUTE MAINTAINERS/vfio-ccw: add Farhan and Eric, make Halil Reviewer vfio: ccw: Merge BUSY and BOXED states s390: use common bust_spinlocks() s390/zcrypt: improve special ap message cmd handling s390/ap: rework assembler functions to use unions for in/out register variables s390: vfio-ap: include <asm/facility> for test_facility() 03 January 2019, 02:37:01 UTC
bf77ae4 NeilBrown 03 January 2019, 00:04:08 UTC locks: fix error in locks_move_blocks() After moving all requests from fl->fl_blocked_requests to new->fl_blocked_requests it is nonsensical to do anything to all the remaining elements, there aren't any. This should do something to all the requests that have been moved. For simplicity, it does it to all requests in the target list. Setting "f->fl_blocker = new" to all members of new->fl_blocked_requests is "obviously correct" as it preserves the invariant of the linkage among requests. Reported-by: syzbot+239d99847eb49ecb3899@syzkaller.appspotmail.com Fixes: 5946c4319ebb ("fs/locks: allow a lock request to block other requests.") Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> 03 January 2019, 01:14:50 UTC
be63004 David S. Miller 03 January 2019, 00:38:59 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Alexei Starovoitov says: ==================== pull-request: bpf 2019-01-02 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) prevent out of bounds speculation on pointer arithmetic, from Daniel. 2) typo fix, from Xiaozhou. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 03 January 2019, 00:38:59 UTC
e6b9257 Linus Torvalds 03 January 2019, 00:35:23 UTC Merge tag 'nfs-for-4.21-1' of git://git.linux-nfs.org/projects/anna/linux-nfs Pull NFS client updates from Anna Schumaker: "Stable bugfixes: - xprtrdma: Yet another double DMA-unmap # v4.20 Features: - Allow some /proc/sys/sunrpc entries without CONFIG_SUNRPC_DEBUG - Per-xprt rdma receive workqueues - Drop support for FMR memory registration - Make port= mount option optional for RDMA mounts Other bugfixes and cleanups: - Remove unused nfs4_xdev_fs_type declaration - Fix comments for behavior that has changed - Remove generic RPC credentials by switching to 'struct cred' - Fix crossing mountpoints with different auth flavors - Various xprtrdma fixes from testing and auditing the close code - Fixes for disconnect issues when using xprtrdma with krb5 - Clean up and improve xprtrdma trace points - Fix NFS v4.2 async copy reboot recovery" * tag 'nfs-for-4.21-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (63 commits) sunrpc: convert to DEFINE_SHOW_ATTRIBUTE sunrpc: Add xprt after nfs4_test_session_trunk() sunrpc: convert unnecessary GFP_ATOMIC to GFP_NOFS sunrpc: handle ENOMEM in rpcb_getport_async NFS: remove unnecessary test for IS_ERR(cred) xprtrdma: Prevent leak of rpcrdma_rep objects NFSv4.2 fix async copy reboot recovery xprtrdma: Don't leak freed MRs xprtrdma: Add documenting comment for rpcrdma_buffer_destroy xprtrdma: Replace outdated comment for rpcrdma_ep_post xprtrdma: Update comments in frwr_op_send SUNRPC: Fix some kernel doc complaints SUNRPC: Simplify defining common RPC trace events NFS: Fix NFSv4 symbolic trace point output xprtrdma: Trace mapping, alloc, and dereg failures xprtrdma: Add trace points for calls to transport switch methods xprtrdma: Relocate the xprtrdma_mr_map trace points xprtrdma: Clean up of xprtrdma chunk trace points xprtrdma: Remove unused fields from rpcrdma_ia xprtrdma: Cull dprintk() call sites ... 03 January 2019, 00:35:23 UTC
e45428a Linus Torvalds 03 January 2019, 00:21:50 UTC Merge tag 'nfsd-4.21' of git://linux-nfs.org/~bfields/linux Pull nfsd updates from Bruce Fields: "Thanks to Vasily Averin for fixing a use-after-free in the containerized NFSv4.2 client, and cleaning up some convoluted backchannel server code in the process. Otherwise, miscellaneous smaller bugfixes and cleanup" * tag 'nfsd-4.21' of git://linux-nfs.org/~bfields/linux: (25 commits) nfs: fixed broken compilation in nfs_callback_up_net() nfs: minor typo in nfs4_callback_up_net() sunrpc: fix debug message in svc_create_xprt() sunrpc: make visible processing error in bc_svc_process() sunrpc: remove unused xpo_prep_reply_hdr callback sunrpc: remove svc_rdma_bc_class sunrpc: remove svc_tcp_bc_class sunrpc: remove unused bc_up operation from rpc_xprt_ops sunrpc: replace svc_serv->sv_bc_xprt by boolean flag sunrpc: use-after-free in svc_process_common() sunrpc: use SVC_NET() in svcauth_gss_* functions nfsd: drop useless LIST_HEAD lockd: Show pid of lockd for remote locks NFSD remove OP_CACHEME from 4.2 op_flags nfsd: Return EPERM, not EACCES, in some SETATTR cases sunrpc: fix cache_head leak due to queued request nfsd: clean up indentation, increase indentation in switch statement svcrdma: Optimize the logic that selects the R_key to invalidate nfsd: fix a warning in __cld_pipe_upcall() nfsd4: fix crash on writing v4_end_grace before nfsd startup ... 03 January 2019, 00:21:50 UTC
a67825f Alexei Starovoitov 03 January 2019, 00:01:25 UTC Merge branch 'prevent-oob-under-speculation' Daniel Borkmann says: ==================== This set fixes an out of bounds case under speculative execution by implementing masking of pointer alu into the verifier. For details please see the individual patches. Thanks! v2 -> v3: - 8/9: change states_equal condition into old->speculative && !cur->speculative, thanks Jakub! - 8/9: remove incorrect speculative state test in propagate_liveness(), thanks Jakub! v1 -> v2: - Typo fixes in commit msg and a comment, thanks David! ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org> 03 January 2019, 00:01:25 UTC
80c9b2f Daniel Borkmann 02 January 2019, 23:58:35 UTC bpf: add various test cases to selftests Add various map value pointer related test cases to test_verifier kselftest to reflect recent changes and improve test coverage. The tests include basic masking functionality, unprivileged behavior on pointer arithmetic which goes oob, mixed bounds tests, negative unknown scalar but resulting positive offset for access and helper range, handling of arithmetic from multiple maps, various masking scenarios with subsequent map value access and others including two test cases from Jann Horn for prior fixes. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> 03 January 2019, 00:01:24 UTC
979d63d Daniel Borkmann 02 January 2019, 23:58:34 UTC bpf: prevent out of bounds speculation on pointer arithmetic Jann reported that the original commit back in b2157399cc98 ("bpf: prevent out-of-bounds speculation") was not sufficient to stop CPU from speculating out of bounds memory access: While b2157399cc98 only focussed on masking array map access for unprivileged users for tail calls and data access such that the user provided index gets sanitized from BPF program and syscall side, there is still a more generic form affected from BPF programs that applies to most maps that hold user data in relation to dynamic map access when dealing with unknown scalars or "slow" known scalars as access offset, for example: - Load a map value pointer into R6 - Load an index into R7 - Do a slow computation (e.g. with a memory dependency) that loads a limit into R8 (e.g. load the limit from a map for high latency, then mask it to make the verifier happy) - Exit if R7 >= R8 (mispredicted branch) - Load R0 = R6[R7] - Load R0 = R6[R0] For unknown scalars there are two options in the BPF verifier where we could derive knowledge from in order to guarantee safe access to the memory: i) While </>/<=/>= variants won't allow to derive any lower or upper bounds from the unknown scalar where it would be safe to add it to the map value pointer, it is possible through ==/!= test however. ii) another option is to transform the unknown scalar into a known scalar, for example, through ALU ops combination such as R &= <imm> followed by R |= <imm> or any similar combination where the original information from the unknown scalar would be destroyed entirely leaving R with a constant. The initial slow load still precedes the latter ALU ops on that register, so the CPU executes speculatively from that point. Once we have the known scalar, any compare operation would work then. A third option only involving registers with known scalars could be crafted as described in [0] where a CPU port (e.g. Slow Int unit) would be filled with many dependent computations such that the subsequent condition depending on its outcome has to wait for evaluation on its execution port and thereby executing speculatively if the speculated code can be scheduled on a different execution port, or any other form of mistraining as described in [1], for example. Given this is not limited to only unknown scalars, not only map but also stack access is affected since both is accessible for unprivileged users and could potentially be used for out of bounds access under speculation. In order to prevent any of these cases, the verifier is now sanitizing pointer arithmetic on the offset such that any out of bounds speculation would be masked in a way where the pointer arithmetic result in the destination register will stay unchanged, meaning offset masked into zero similar as in array_index_nospec() case. With regards to implementation, there are three options that were considered: i) new insn for sanitation, ii) push/pop insn and sanitation as inlined BPF, iii) reuse of ax register and sanitation as inlined BPF. Option i) has the downside that we end up using from reserved bits in the opcode space, but also that we would require each JIT to emit masking as native arch opcodes meaning mitigation would have slow adoption till everyone implements it eventually which is counter-productive. Option ii) and iii) have both in common that a temporary register is needed in order to implement the sanitation as inlined BPF since we are not allowed to modify the source register. While a push / pop insn in ii) would be useful to have in any case, it requires once again that every JIT needs to implement it first. While possible, amount of changes needed would also be unsuitable for a -stable patch. Therefore, the path which has fewer changes, less BPF instructions for the mitigation and does not require anything to be changed in the JITs is option iii) which this work is pursuing. The ax register is already mapped to a register in all JITs (modulo arm32 where it's mapped to stack as various other BPF registers there) and used in constant blinding for JITs-only so far. It can be reused for verifier rewrites under certain constraints. The interpreter's tmp "register" has therefore been remapped into extending the register set with hidden ax register and reusing that for a number of instructions that needed the prior temporary variable internally (e.g. div, mod). This allows for zero increase in stack space usage in the interpreter, and enables (restricted) generic use in rewrites otherwise as long as such a patchlet does not make use of these instructions. The sanitation mask is dynamic and relative to the offset the map value or stack pointer currently holds. There are various cases that need to be taken under consideration for the masking, e.g. such operation could look as follows: ptr += val or val += ptr or ptr -= val. Thus, the value to be sanitized could reside either in source or in destination register, and the limit is different depending on whether the ALU op is addition or subtraction and depending on the current known and bounded offset. The limit is derived as follows: limit := max_value_size - (smin_value + off). For subtraction: limit := umax_value + off. This holds because we do not allow any pointer arithmetic that would temporarily go out of bounds or would have an unknown value with mixed signed bounds where it is unclear at verification time whether the actual runtime value would be either negative or positive. For example, we have a derived map pointer value with constant offset and bounded one, so limit based on smin_value works because the verifier requires that statically analyzed arithmetic on the pointer must be in bounds, and thus it checks if resulting smin_value + off and umax_value + off is still within map value bounds at time of arithmetic in addition to time of access. Similarly, for the case of stack access we derive the limit as follows: MAX_BPF_STACK + off for subtraction and -off for the case of addition where off := ptr_reg->off + ptr_reg->var_off.value. Subtraction is a special case for the masking which can be in form of ptr += -val, ptr -= -val, or ptr -= val. In the first two cases where we know that the value is negative, we need to temporarily negate the value in order to do the sanitation on a positive value where we later swap the ALU op, and restore original source register if the value was in source. The sanitation of pointer arithmetic alone is still not fully sufficient as is, since a scenario like the following could happen ... PTR += 0x1000 (e.g. K-based imm) PTR -= BIG_NUMBER_WITH_SLOW_COMPARISON PTR += 0x1000 PTR -= BIG_NUMBER_WITH_SLOW_COMPARISON [...] ... which under speculation could end up as ... PTR += 0x1000 PTR -= 0 [ truncated by mitigation ] PTR += 0x1000 PTR -= 0 [ truncated by mitigation ] [...] ... and therefore still access out of bounds. To prevent such case, the verifier is also analyzing safety for potential out of bounds access under speculative execution. Meaning, it is also simulating pointer access under truncation. We therefore "branch off" and push the current verification state after the ALU operation with known 0 to the verification stack for later analysis. Given the current path analysis succeeded it is likely that the one under speculation can be pruned. In any case, it is also subject to existing complexity limits and therefore anything beyond this point will be rejected. In terms of pruning, it needs to be ensured that the verification state from speculative execution simulation must never prune a non-speculative execution path, therefore, we mark verifier state accordingly at the time of push_stack(). If verifier detects out of bounds access under speculative execution from one of the possible paths that includes a truncation, it will reject such program. Given we mask every reg-based pointer arithmetic for unprivileged programs, we've been looking into how it could affect real-world programs in terms of size increase. As the majority of programs are targeted for privileged-only use case, we've unconditionally enabled masking (with its alu restrictions on top of it) for privileged programs for the sake of testing in order to check i) whether they get rejected in its current form, and ii) by how much the number of instructions and size will increase. We've tested this by using Katran, Cilium and test_l4lb from the kernel selftests. For Katran we've evaluated balancer_kern.o, Cilium bpf_lxc.o and an older test object bpf_lxc_opt_-DUNKNOWN.o and l4lb we've used test_l4lb.o as well as test_l4lb_noinline.o. We found that none of the programs got rejected by the verifier with this change, and that impact is rather minimal to none. balancer_kern.o had 13,904 bytes (1,738 insns) xlated and 7,797 bytes JITed before and after the change. Most complex program in bpf_lxc.o had 30,544 bytes (3,817 insns) xlated and 18,538 bytes JITed before and after and none of the other tail call programs in bpf_lxc.o had any changes either. For the older bpf_lxc_opt_-DUNKNOWN.o object we found a small increase from 20,616 bytes (2,576 insns) and 12,536 bytes JITed before to 20,664 bytes (2,582 insns) and 12,558 bytes JITed after the change. Other programs from that object file had similar small increase. Both test_l4lb.o had no change and remained at 6,544 bytes (817 insns) xlated and 3,401 bytes JITed and for test_l4lb_noinline.o constant at 5,080 bytes (634 insns) xlated and 3,313 bytes JITed. This can be explained in that LLVM typically optimizes stack based pointer arithmetic by using K-based operations and that use of dynamic map access is not overly frequent. However, in future we may decide to optimize the algorithm further under known guarantees from branch and value speculation. Latter seems also unclear in terms of prediction heuristics that today's CPUs apply as well as whether there could be collisions in e.g. the predictor's Value History/Pattern Table for triggering out of bounds access, thus masking is performed unconditionally at this point but could be subject to relaxation later on. We were generally also brainstorming various other approaches for mitigation, but the blocker was always lack of available registers at runtime and/or overhead for runtime tracking of limits belonging to a specific pointer. Thus, we found this to be minimally intrusive under given constraints. With that in place, a simple example with sanitized access on unprivileged load at post-verification time looks as follows: # bpftool prog dump xlated id 282 [...] 28: (79) r1 = *(u64 *)(r7 +0) 29: (79) r2 = *(u64 *)(r7 +8) 30: (57) r1 &= 15 31: (79) r3 = *(u64 *)(r0 +4608) 32: (57) r3 &= 1 33: (47) r3 |= 1 34: (2d) if r2 > r3 goto pc+19 35: (b4) (u32) r11 = (u32) 20479 | 36: (1f) r11 -= r2 | Dynamic sanitation for pointer 37: (4f) r11 |= r2 | arithmetic with registers 38: (87) r11 = -r11 | containing bounded or known 39: (c7) r11 s>>= 63 | scalars in order to prevent 40: (5f) r11 &= r2 | out of bounds speculation. 41: (0f) r4 += r11 | 42: (71) r4 = *(u8 *)(r4 +0) 43: (6f) r4 <<= r1 [...] For the case where the scalar sits in the destination register as opposed to the source register, the following code is emitted for the above example: [...] 16: (b4) (u32) r11 = (u32) 20479 17: (1f) r11 -= r2 18: (4f) r11 |= r2 19: (87) r11 = -r11 20: (c7) r11 s>>= 63 21: (5f) r2 &= r11 22: (0f) r2 += r0 23: (61) r0 = *(u32 *)(r2 +0) [...] JIT blinding example with non-conflicting use of r10: [...] d5: je 0x0000000000000106 _ d7: mov 0x0(%rax),%edi | da: mov $0xf153246,%r10d | Index load from map value and e0: xor $0xf153259,%r10 | (const blinded) mask with 0x1f. e7: and %r10,%rdi |_ ea: mov $0x2f,%r10d | f0: sub %rdi,%r10 | Sanitized addition. Both use r10 f3: or %rdi,%r10 | but do not interfere with each f6: neg %r10 | other. (Neither do these instructions f9: sar $0x3f,%r10 | interfere with the use of ax as temp fd: and %r10,%rdi | in interpreter.) 100: add %rax,%rdi |_ 103: mov 0x0(%rdi),%eax [...] Tested that it fixes Jann's reproducer, and also checked that test_verifier and test_progs suite with interpreter, JIT and JIT with hardening enabled on x86-64 and arm64 runs successfully. [0] Speculose: Analyzing the Security Implications of Speculative Execution in CPUs, Giorgi Maisuradze and Christian Rossow, https://arxiv.org/pdf/1801.04084.pdf [1] A Systematic Evaluation of Transient Execution Attacks and Defenses, Claudio Canella, Jo Van Bulck, Michael Schwarz, Moritz Lipp, Benjamin von Berg, Philipp Ortner, Frank Piessens, Dmitry Evtyushkin, Daniel Gruss, https://arxiv.org/pdf/1811.05441.pdf Fixes: b2157399cc98 ("bpf: prevent out-of-bounds speculation") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> 03 January 2019, 00:01:24 UTC
b7137c4 Daniel Borkmann 02 January 2019, 23:58:33 UTC bpf: fix check_map_access smin_value test when pointer contains offset In check_map_access() we probe actual bounds through __check_map_access() with offset of reg->smin_value + off for lower bound and offset of reg->umax_value + off for the upper bound. However, even though the reg->smin_value could have a negative value, the final result of the sum with off could be positive when pointer arithmetic with known and unknown scalars is combined. In this case we reject the program with an error such as "R<x> min value is negative, either use unsigned index or do a if (index >=0) check." even though the access itself would be fine. Therefore extend the check to probe whether the actual resulting reg->smin_value + off is less than zero. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> 03 January 2019, 00:01:24 UTC
9d7ecee Daniel Borkmann 02 January 2019, 23:58:32 UTC bpf: restrict unknown scalars of mixed signed bounds for unprivileged For unknown scalars of mixed signed bounds, meaning their smin_value is negative and their smax_value is positive, we need to reject arithmetic with pointer to map value. For unprivileged the goal is to mask every map pointer arithmetic and this cannot reliably be done when it is unknown at verification time whether the scalar value is negative or positive. Given this is a corner case, the likelihood of breaking should be very small. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> 03 January 2019, 00:01:24 UTC
e4298d2 Daniel Borkmann 02 January 2019, 23:58:31 UTC bpf: restrict stack pointer arithmetic for unprivileged Restrict stack pointer arithmetic for unprivileged users in that arithmetic itself must not go out of bounds as opposed to the actual access later on. Therefore after each adjust_ptr_min_max_vals() with a stack pointer as a destination we simulate a check_stack_access() of 1 byte on the destination and once that fails the program is rejected for unprivileged program loads. This is analog to map value pointer arithmetic and needed for masking later on. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> 03 January 2019, 00:01:24 UTC
0d6303d Daniel Borkmann 02 January 2019, 23:58:30 UTC bpf: restrict map value pointer arithmetic for unprivileged Restrict map value pointer arithmetic for unprivileged users in that arithmetic itself must not go out of bounds as opposed to the actual access later on. Therefore after each adjust_ptr_min_max_vals() with a map value pointer as a destination it will simulate a check_map_access() of 1 byte on the destination and once that fails the program is rejected for unprivileged program loads. We use this later on for masking any pointer arithmetic with the remainder of the map value space. The likelihood of breaking any existing real-world unprivileged eBPF program is very small for this corner case. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> 03 January 2019, 00:01:24 UTC
9b73bfd Daniel Borkmann 02 January 2019, 23:58:29 UTC bpf: enable access to ax register also from verifier rewrite Right now we are using BPF ax register in JIT for constant blinding as well as in interpreter as temporary variable. Verifier will not be able to use it simply because its use will get overridden from the former in bpf_jit_blind_insn(). However, it can be made to work in that blinding will be skipped if there is prior use in either source or destination register on the instruction. Taking constraints of ax into account, the verifier is then open to use it in rewrites under some constraints. Note, ax register already has mappings in every eBPF JIT. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> 03 January 2019, 00:01:24 UTC
144cd91 Daniel Borkmann 02 January 2019, 23:58:28 UTC bpf: move tmp variable into ax register in interpreter This change moves the on-stack 64 bit tmp variable in ___bpf_prog_run() into the hidden ax register. The latter is currently only used in JITs for constant blinding as a temporary scratch register, meaning the BPF interpreter will never see the use of ax. Therefore it is safe to use it for the cases where tmp has been used earlier. This is needed to later on allow restricted hidden use of ax in both interpreter and JITs. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> 03 January 2019, 00:01:24 UTC
c08435e Daniel Borkmann 02 January 2019, 23:58:27 UTC bpf: move {prev_,}insn_idx into verifier env Move prev_insn_idx and insn_idx from the do_check() function into the verifier environment, so they can be read inside the various helper functions for handling the instructions. It's easier to put this into the environment rather than changing all call-sites only to pass it along. insn_idx is useful in particular since this later on allows to hold state in env->insn_aux_data[env->insn_idx]. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> 03 January 2019, 00:01:24 UTC
85f7845 Linus Torvalds 02 January 2019, 20:11:01 UTC Merge tag '9p-for-4.21' of git://github.com/martinetd/linux Pull 9p updates from Dominique Martinet: "Missing prototype warning fix and a syzkaller fix when a 9p server advertises a too small msize" * tag '9p-for-4.21' of git://github.com/martinetd/linux: 9p/net: put a lower bound on msize net/9p: include trans_common.h to fix missing prototype warning. 02 January 2019, 20:11:01 UTC
cacf02d Linus Torvalds 02 January 2019, 20:08:29 UTC Merge tag '4.21-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs updates from Steve French: - four fixes for stable - improvements to DFS including allowing failover to alternate targets - some small performance improvements * tag '4.21-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (39 commits) cifs: update internal module version number cifs: we can not use small padding iovs together with encryption cifs: Minor Kconfig clarification cifs: Always resolve hostname before reconnecting cifs: Add support for failover in cifs_reconnect_tcon() cifs: Add support for failover in smb2_reconnect() cifs: Only free DFS target list if we actually got one cifs: start DFS cache refresher in cifs_mount() cifs: Use GFP_ATOMIC when a lock is held in cifs_mount() cifs: Add support for failover in cifs_reconnect() cifs: Add support for failover in cifs_mount() cifs: remove set but not used variable 'sep' cifs: Make use of DFS cache to get new DFS referrals cifs: minor updates to documentation cifs: check kzalloc return cifs: remove set but not used variable 'server' cifs: Use kzfree() to free password cifs: Fix to use kmem_cache_free() instead of kfree() cifs: update for current_kernel_time64() removal cifs: Add DFS cache routines ... 02 January 2019, 20:08:29 UTC
74673fc Linus Torvalds 02 January 2019, 19:05:43 UTC Merge branch 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull TPM updates from James Morris: - Support for partial reads of /dev/tpm0. - Clean up for TPM 1.x code: move the commands to tpm1-cmd.c and make everything to use the same data structure for building TPM commands i.e. struct tpm_buf. * 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (25 commits) tpm: add support for partial reads tpm: tpm_ibmvtpm: fix kdoc warnings tpm: fix kdoc for tpm2_flush_context_cmd() tpm: tpm_try_transmit() refactor error flow. tpm: use u32 instead of int for PCR index tpm1: reimplement tpm1_continue_selftest() using tpm_buf tpm1: reimplement SAVESTATE using tpm_buf tpm1: rename tpm1_pcr_read_dev to tpm1_pcr_read() tpm1: implement tpm1_pcr_read_dev() using tpm_buf structure tpm: tpm1: rewrite tpm1_get_random() using tpm_buf structure tpm: tpm-space.c remove unneeded semicolon tpm: tpm-interface.c drop unused macros tpm: add tpm_auto_startup() into tpm-interface.c tpm: factor out tpm_startup function tpm: factor out tpm 1.x pm suspend flow into tpm1-cmd.c tpm: move tpm 1.x selftest code from tpm-interface.c tpm1-cmd.c tpm: factor out tpm1_get_random into tpm1-cmd.c tpm: move tpm_getcap to tpm1-cmd.c tpm: move tpm1_pcr_extend to tpm1-cmd.c tpm: factor out tpm_get_timeouts() ... 02 January 2019, 19:05:43 UTC
19f2e26 Linus Torvalds 02 January 2019, 18:56:09 UTC Merge branch 'next-smack' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull smack updates from James Morris: "Two Smack patches for 4.21. Jose's patch adds missing documentation and Zoran's fleshes out the access checks on keyrings" * 'next-smack' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: Smack: Improve Documentation smack: fix access permissions for keyring 02 January 2019, 18:56:09 UTC
1ac5cd4 Linus Torvalds 02 January 2019, 18:46:03 UTC block: don't use un-ordered __set_current_state(TASK_UNINTERRUPTIBLE) This mostly reverts commit 849a370016a5 ("block: avoid ordered task state change for polled IO"). It was wrongly claiming that the ordering wasn't necessary. The memory barrier _is_ necessary. If something is truly polling and not going to sleep, it's the whole state setting that is unnecessary, not the memory barrier. Whenever you set your state to a sleeping state, you absolutely need the memory barrier. Note that sometimes the memory barrier can be elsewhere. For example, the ordering might be provided by an external lock, or by setting the process state to sleeping before adding yourself to the wait queue list that is used for waking up (where the wait queue lock itself will guarantee that any wakeup will correctly see the sleeping state). But none of those cases were true here. NOTE! Some of the polling paths may indeed be able to drop the state setting entirely, at which point the memory barrier also goes away. (Also note that this doesn't revert the TASK_RUNNING cases: there is no race between a wakeup and setting the process state to TASK_RUNNING, since the end result doesn't depend on ordering). Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 January 2019, 18:46:03 UTC
d63967e Eric Dumazet 02 January 2019, 17:20:27 UTC isdn: fix kernel-infoleak in capi_unlocked_ioctl Since capi_ioctl() copies 64 bytes after calling capi20_get_manufacturer() we need to ensure to not leak information to user. BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 CPU: 0 PID: 11245 Comm: syz-executor633 Not tainted 4.20.0-rc7+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 kmsan_internal_check_memory+0x9d4/0xb00 mm/kmsan/kmsan.c:704 kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601 _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 capi_ioctl include/linux/uaccess.h:177 [inline] capi_unlocked_ioctl+0x1a0b/0x1bf0 drivers/isdn/capi/capi.c:939 do_vfs_ioctl+0xebd/0x2bf0 fs/ioctl.c:46 ksys_ioctl fs/ioctl.c:713 [inline] __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl+0x1da/0x270 fs/ioctl.c:718 __x64_sys_ioctl+0x4a/0x70 fs/ioctl.c:718 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x440019 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdd4659fb8 EFLAGS: 00000213 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440019 RDX: 0000000020000080 RSI: 00000000c0044306 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8 R10: 0000000000000000 R11: 0000000000000213 R12: 00000000004018a0 R13: 0000000000401930 R14: 0000000000000000 R15: 0000000000000000 Local variable description: ----data.i@capi_unlocked_ioctl Variable was created at: capi_ioctl drivers/isdn/capi/capi.c:747 [inline] capi_unlocked_ioctl+0x82/0x1bf0 drivers/isdn/capi/capi.c:939 do_vfs_ioctl+0xebd/0x2bf0 fs/ioctl.c:46 Bytes 12-63 of 64 are uninitialized Memory access of size 64 starts at ffff88807ac5fce8 Data copied to user address 0000000020000080 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net> 02 January 2019, 18:31:39 UTC
7adf324 Stefano Brivio 02 January 2019, 12:29:27 UTC ipv6: route: Fix return value of ip6_neigh_lookup() on neigh_create() error In ip6_neigh_lookup(), we must not return errors coming from neigh_create(): if creation of a neighbour entry fails, the lookup should return NULL, in the same way as it's done in __neigh_lookup(). Otherwise, callers legitimately checking for a non-NULL return value of the lookup function might dereference an invalid pointer. For instance, on neighbour table overflow, ndisc_router_discovery() crashes ndisc_update() by passing ERR_PTR(-ENOBUFS) as 'neigh' argument. Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: f8a1b43b709d ("net/ipv6: Create a neigh_lookup for FIB entries") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 January 2019, 18:29:20 UTC
202700e Eric Dumazet 02 January 2019, 12:24:20 UTC net/hamradio/6pack: use mod_timer() to rearm timers Using del_timer() + add_timer() is generally unsafe on SMP, as noticed by syzbot. Use mod_timer() instead. kernel BUG at kernel/time/timer.c:1136! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 1026 Comm: kworker/u4:4 Not tainted 4.20.0+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events_unbound flush_to_ldisc RIP: 0010:add_timer kernel/time/timer.c:1136 [inline] RIP: 0010:add_timer+0xa81/0x1470 kernel/time/timer.c:1134 Code: 4d 89 7d 40 48 c7 85 70 fe ff ff 00 00 00 00 c7 85 7c fe ff ff ff ff ff ff 48 89 85 90 fe ff ff e9 e6 f7 ff ff e8 cf 42 12 00 <0f> 0b e8 c8 42 12 00 0f 0b e8 c1 42 12 00 4c 89 bd 60 fe ff ff e9 RSP: 0018:ffff8880a7fdf5a8 EFLAGS: 00010293 RAX: ffff8880a7846340 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff816f3ee1 RDI: ffff88808a514ff8 RBP: ffff8880a7fdf760 R08: 0000000000000007 R09: ffff8880a7846c58 R10: ffff8880a7846340 R11: 0000000000000000 R12: ffff88808a514ff8 R13: ffff88808a514ff8 R14: ffff88808a514dc0 R15: 0000000000000030 FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000061c500 CR3: 00000000994d9000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: decode_prio_command drivers/net/hamradio/6pack.c:903 [inline] sixpack_decode drivers/net/hamradio/6pack.c:971 [inline] sixpack_receive_buf drivers/net/hamradio/6pack.c:457 [inline] sixpack_receive_buf+0xf9c/0x1470 drivers/net/hamradio/6pack.c:434 tty_ldisc_receive_buf+0x164/0x1c0 drivers/tty/tty_buffer.c:465 tty_port_default_receive_buf+0x114/0x190 drivers/tty/tty_port.c:38 receive_buf drivers/tty/tty_buffer.c:481 [inline] flush_to_ldisc+0x3b2/0x590 drivers/tty/tty_buffer.c:533 process_one_work+0xd0c/0x1ce0 kernel/workqueue.c:2153 worker_thread+0x143/0x14a0 kernel/workqueue.c:2296 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Signed-off-by: David S. Miller <davem@davemloft.net> 02 January 2019, 18:27:01 UTC
53fe3ed Xue Chaojing 01 January 2019, 19:39:33 UTC net-next/hinic:add shutdown callback If there is no shutdown callback, our board will report pcie UNF errors after restarting. This patch add shutdown callback for hinic. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 January 2019, 18:13:35 UTC
d9a7fa6 Linus Torvalds 02 January 2019, 17:48:13 UTC Merge branch 'next-seccomp' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull seccomp updates from James Morris: - Add SECCOMP_RET_USER_NOTIF - seccomp fixes for sparse warnings and s390 build (Tycho) * 'next-seccomp' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: seccomp, s390: fix build for syscall type change seccomp: fix poor type promotion samples: add an example of seccomp user trap seccomp: add a return code to trap to userspace seccomp: switch system call argument type to void * seccomp: hoist struct seccomp_data recalculation higher 02 January 2019, 17:48:13 UTC
f218a29 Linus Torvalds 02 January 2019, 17:43:14 UTC Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull integrity updates from James Morris: "In Linux 4.19, a new LSM hook named security_kernel_load_data was upstreamed, allowing LSMs and IMA to prevent the kexec_load syscall. Different signature verification methods exist for verifying the kexec'ed kernel image. This adds additional support in IMA to prevent loading unsigned kernel images via the kexec_load syscall, independently of the IMA policy rules, based on the runtime "secure boot" flag. An initial IMA kselftest is included. In addition, this pull request defines a new, separate keyring named ".platform" for storing the preboot/firmware keys needed for verifying the kexec'ed kernel image's signature and includes the associated IMA kexec usage of the ".platform" keyring. (David Howell's and Josh Boyer's patches for reading the preboot/firmware keys, which were previously posted for a different use case scenario, are included here)" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: integrity: Remove references to module keyring ima: Use inode_is_open_for_write ima: Support platform keyring for kernel appraisal efi: Allow the "db" UEFI variable to be suppressed efi: Import certificates from UEFI Secure Boot efi: Add an EFI signature blob parser efi: Add EFI signature data types integrity: Load certs to the platform keyring integrity: Define a trusted platform keyring selftests/ima: kexec_load syscall test ima: don't measure/appraise files on efivarfs x86/ima: retry detecting secure boot mode docs: Extend trusted keys documentation for TPM 2.0 x86/ima: define arch_get_ima_policy() for x86 ima: add support for arch specific policies ima: refactor ima_init_policy() ima: prevent kexec_load syscall based on runtime secureboot flag x86/ima: define arch_ima_get_secureboot integrity: support new struct public_key_signature encoding field 02 January 2019, 17:43:14 UTC
260f71e Yangtao Li 21 December 2018, 15:59:36 UTC sunrpc: convert to DEFINE_SHOW_ATTRIBUTE Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:49 UTC
10e037d Santosh kumar pradhan 19 December 2018, 06:59:57 UTC sunrpc: Add xprt after nfs4_test_session_trunk() Multipathing: In case of NFSv3, rpc_clnt_test_and_add_xprt() adds the xprt to xprt switch (i.e. xps) if rpc_call_null_helper() returns success. But in case of NFSv4.1, it needs to do EXCHANGEID to verify the path along with check for session trunking. Add the xprt in nfs4_test_session_trunk() only when nfs4_detect_session_trunking() returns success. Also release refcount hold by rpc_clnt_setup_test_and_add_xprt(). Signed-off-by: Santosh kumar pradhan <santoshkumar.pradhan@wdc.com> Tested-by: Suresh Jayaraman <suresh.jayaraman@wdc.com> Reported-by: Aditya Agnihotri <aditya.agnihotri@wdc.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:19 UTC
cb24e35 J. Bruce Fields 20 December 2018, 15:42:36 UTC sunrpc: convert unnecessary GFP_ATOMIC to GFP_NOFS It's OK to sleep here, we just don't want to recurse into the filesystem as a writeout could be waiting on this. Future work: the documentation for GFP_NOFS says "Please try to avoid using this flag directly and instead use memalloc_nofs_{save,restore} to mark the whole scope which cannot/shouldn't recurse into the FS layer with a short explanation why. All allocation requests will inherit GFP_NOFS implicitly." But I'm not sure where to do this. Should the workqueue be arranging that for us in the case of workqueues created with WQ_MEM_RECLAIM? Reported-by: Trond Myklebust <trondmy@hammer.space> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:19 UTC
81c88b1 J. Bruce Fields 20 December 2018, 15:35:11 UTC sunrpc: handle ENOMEM in rpcb_getport_async If we ignore the error we'll hit a null dereference a little later. Reported-by: syzbot+4b98281f2401ab849f4b@syzkaller.appspotmail.com Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:19 UTC
c2c7d84 NeilBrown 19 December 2018, 23:29:55 UTC NFS: remove unnecessary test for IS_ERR(cred) As gte_current_cred() cannot return an error, this test is not necessary. It hasn't been necessary for years, but it wasn't so obvious before. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:19 UTC
07e1030 Chuck Lever 07 December 2018, 16:11:44 UTC xprtrdma: Prevent leak of rpcrdma_rep objects If a reply has been processed but the RPC is later retransmitted anyway, the req->rl_reply field still contains the only pointer to the old rpcrdma rep. When the next reply comes in, the reply handler will stomp on the rl_reply field, leaking the old rep. A trace event is added to capture such leaks. This problem seems to be worsened by the restructuring of the RPC Call path in v4.20. Fully addressing this issue will require at least a re-architecture of the disconnect logic, which is not appropriate during -rc. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:19 UTC
9aeaf8c Olga Kornievskaia 06 December 2018, 16:10:36 UTC NFSv4.2 fix async copy reboot recovery Original commit (e4648aa4f98a "NFS recover from destination server reboot for copies") used memcmp() and then it was changed to use nfs4_stateid_match_other() but that function returns opposite of memcmp. As the result, recovery can't find the copy leading to copy hanging. Fixes: 80f42368868e ("NFSv4: Split out NFS v4.2 copy completion functions") Fixes: cb7a8384dc02 ("NFS: Split out the body of nfs4_reclaim_open_state") Signed-of-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:19 UTC
f85adb1 Chuck Lever 19 December 2018, 16:00:48 UTC xprtrdma: Don't leak freed MRs Defensive clean up. Don't set frwr->fr_mr until we know that the scatterlist allocation has succeeded. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
af65ed4 Chuck Lever 19 December 2018, 16:00:37 UTC xprtrdma: Add documenting comment for rpcrdma_buffer_destroy Make a note of the function's dependency on an earlier ib_drain_qp. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
995d312 Chuck Lever 19 December 2018, 16:00:32 UTC xprtrdma: Replace outdated comment for rpcrdma_ep_post Since commit 7c8d9e7c8863 ("xprtrdma: Move Receive posting to Receive handler"), rpcrdma_ep_post is no longer responsible for posting Receive buffers. Update the documenting comment to reflect this change. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
e0f86bc Chuck Lever 19 December 2018, 16:00:27 UTC xprtrdma: Update comments in frwr_op_send Commit f2877623082b ("xprtrdma: Chain Send to FastReg WRs") was written before commit ce5b37178283 ("xprtrdma: Replace all usage of "frmr" with "frwr""), but was merged afterwards. Thus it still refers to FRMR and MWs. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
acf0a39 Chuck Lever 19 December 2018, 16:00:22 UTC SUNRPC: Fix some kernel doc complaints Clean up some warnings observed when building with "make W=1". Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
dc5820b Chuck Lever 19 December 2018, 16:00:16 UTC SUNRPC: Simplify defining common RPC trace events Clean up, no functional change is expected. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
5b2095d Chuck Lever 19 December 2018, 16:00:11 UTC NFS: Fix NFSv4 symbolic trace point output These symbolic values were not being displayed in string form. TRACE_DEFINE_ENUM was missing in many cases. It also turns out that __print_symbolic wants an unsigned long in the first field... Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
53b2c1c Chuck Lever 19 December 2018, 16:00:06 UTC xprtrdma: Trace mapping, alloc, and dereg failures These are rare, but can be helpful at tracking down DMAR and other problems. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
395069f Chuck Lever 19 December 2018, 16:00:00 UTC xprtrdma: Add trace points for calls to transport switch methods Name them "trace_xprtrdma_op_*" so they can be easily enabled as a group. No trace point is added where the generic layer already has observability. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
ba217ec Chuck Lever 19 December 2018, 15:59:55 UTC xprtrdma: Relocate the xprtrdma_mr_map trace points The mr_map trace points were capturing information about the previous use of the MR rather than about the segment that was just mapped. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
aba1183 Chuck Lever 19 December 2018, 15:59:49 UTC xprtrdma: Clean up of xprtrdma chunk trace points The chunk-related trace points capture nearly the same information as the MR-related trace points. Also, rename them so globbing can be used to enable or disable these trace points more easily. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
9bef848 Chuck Lever 19 December 2018, 15:59:44 UTC xprtrdma: Remove unused fields from rpcrdma_ia Clean up. The last use of these fields was in commit 173b8f49b3af ("xprtrdma: Demote "connect" log messages") . Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
ddbb347 Chuck Lever 19 December 2018, 15:59:39 UTC xprtrdma: Cull dprintk() call sites Clean up: Remove dprintk() call sites that report rare or impossible errors. Leave a few that display high-value low noise status information. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
92f4433 Chuck Lever 19 December 2018, 15:59:33 UTC xprtrdma: Simplify locking that protects the rl_allreqs list Clean up: There's little chance of contention between the use of rb_lock and rb_reqslock, so merge the two. This avoids having to take both in some (possibly future) cases. Transport tear-down is already serialized, thus there is no need for locking at all when destroying rpcrdma_reqs. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
236b094 Chuck Lever 19 December 2018, 15:59:28 UTC xprtrdma: Expose transport header errors For better observability of parsing errors, return the error code generated in the decoders to the upper layer consumer. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:18 UTC
889ee07 Chuck Lever 19 December 2018, 15:59:23 UTC xprtrdma: Remove request_module from backchannel Since commit ffe1f0df5862 ("rpcrdma: Merge svcrdma and xprtrdma modules into one"), the forward and backchannel components are part of the same kernel module. A separate request_module() call in the backchannel code is no longer necessary. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:17 UTC
15303d9 Chuck Lever 19 December 2018, 15:59:17 UTC xprtrdma: Recognize XDRBUF_SPARSE_PAGES Commit 431f6eb3570f ("SUNRPC: Add a label for RPC calls that require allocation on receive") didn't update similar logic in rpc_rdma.c. I don't think this is a bug, per-se; the commit just adds more careful checking for broken upper layer behavior. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:17 UTC
0dfbb5f Chuck Lever 19 December 2018, 15:59:12 UTC NFS: Make "port=" mount option optional for RDMA mounts Having to specify "proto=rdma,port=20049" is cumbersome. RFC 8267 Section 6.3 requires NFSv4 clients to use "the alternative well-known port number", which is 20049. Make the use of the well- known port number automatic, just as it is for NFS/TCP and port 2049. For NFSv2/3, Section 4.2 allows clients to simply choose 20049 as the default or use rpcbind. I don't know of an NFS/RDMA server implementation that registers it's NFS/RDMA service with rpcbind, so automatically choosing 20049 seems like the better choice. The other widely-deployed NFS/RDMA client, Solaris, also uses 20049 as the default port. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:17 UTC
0a93fbc Chuck Lever 19 December 2018, 15:59:07 UTC xprtrdma: Plant XID in on-the-wire RDMA offset (FRWR) Place the associated RPC transaction's XID in the upper 32 bits of each RDMA segment's rdma_offset field. There are two reasons to do this: - The R_key only has 8 bits that are different from registration to registration. The XID adds more uniqueness to each RDMA segment to reduce the likelihood of a software bug on the server reading from or writing into memory it's not supposed to. - On-the-wire RDMA Read and Write requests do not otherwise carry any identifier that matches them up to an RPC. The XID in the upper 32 bits will act as an eye-catcher in network captures. Suggested-by: Tom Talpey <ttalpey@microsoft.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:17 UTC
5f62412 Chuck Lever 19 December 2018, 15:59:01 UTC xprtrdma: Remove rpcrdma_memreg_ops Clean up: Now that there is only FRWR, there is no need for a memory registration switch. The indirect calls to the memreg operations can be replaced with faster direct calls. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:17 UTC
ba69cd1 Chuck Lever 19 December 2018, 15:58:56 UTC xprtrdma: Remove support for FMR memory registration FMR is not supported on most recent RDMA devices. It is also less secure than FRWR because an FMR memory registration can expose adjacent bytes to remote reading or writing. As discussed during the RDMA BoF at LPC 2018, it is time to remove support for FMR in the NFS/RDMA client stack. Note that NFS/RDMA server-side uses either local memory registration or FRWR. FMR is not used. There are a few Infiniband/RoCE devices in the kernel tree that do not appear to support MEM_MGT_EXTENSIONS (FRWR), and therefore will not support client-side NFS/RDMA after this patch. These are: - mthca - qib - hns (RoCE) Users of these devices can use NFS/TCP on IPoIB instead. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:17 UTC
a788684 Chuck Lever 19 December 2018, 15:58:51 UTC xprtrdma: Reduce max_frwr_depth Some devices advertise a large max_fast_reg_page_list_len capability, but perform optimally when MRs are significantly smaller than that depth -- probably when the MR itself is no larger than a page. By default, the RDMA R/W core API uses max_sge_rd as the maximum page depth for MRs. For some devices, the value of max_sge_rd is 1, which is also not optimal. Thus, when max_sge_rd is larger than 1, use that value. Otherwise use the value of the max_fast_reg_page_list_len attribute. I've tested this with CX-3 Pro, FastLinq, and CX-5 devices. It reproducibly improves the throughput of large I/Os by several percent. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:17 UTC
6946f82 Chuck Lever 19 December 2018, 15:58:45 UTC xprtrdma: Fix ri_max_segs and the result of ro_maxpages With certain combinations of krb5i/p, MR size, and r/wsize, I/O can fail with EMSGSIZE. This is because the calculated value of ri_max_segs (the max number of MRs per RPC) exceeded RPCRDMA_MAX_HDR_SEGS, which caused Read or Write list encoding to walk off the end of the transport header. Once that was addressed, the ro_maxpages result has to be corrected to account for the number of MRs needed for Reply chunks, which is 2 MRs smaller than a normal Read or Write chunk. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:16 UTC
0c0829b Chuck Lever 19 December 2018, 15:58:40 UTC xprtrdma: Don't wake pending tasks until disconnect is done Transport disconnect processing does a "wake pending tasks" at various points. Suppose an RPC Reply is being processed. The RPC task that Reply goes with is waiting on the pending queue. If a disconnect wake-up happens before reply processing is done, that reply, even if it is good, is thrown away, and the RPC has to be sent again. This window apparently does not exist for socket transports because there is a lock held while a reply is being received which prevents the wake-up call until after reply processing is done. To resolve this, all RPC replies being processed on an RPC-over-RDMA transport have to complete before pending tasks are awoken due to a transport disconnect. Callers that already hold the transport write lock may invoke ->ops->close directly. Others use a generic helper that schedules a close when the write lock can be taken safely. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:16 UTC
3d433ad Chuck Lever 19 December 2018, 15:58:35 UTC xprtrdma: No qp_event disconnect After thinking about this more, and auditing other kernel ULP imple- mentations, I believe that a DISCONNECT cm_event will occur after a fatal QP event. If that's the case, there's no need for an explicit disconnect in the QP event handler. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:16 UTC
6d2d0ee Chuck Lever 19 December 2018, 15:58:29 UTC xprtrdma: Replace rpcrdma_receive_wq with a per-xprt workqueue To address a connection-close ordering problem, we need the ability to drain the RPC completions running on rpcrdma_receive_wq for just one transport. Give each transport its own RPC completion workqueue, and drain that workqueue when disconnecting the transport. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:16 UTC
6ceea36 Chuck Lever 19 December 2018, 15:58:24 UTC xprtrdma: Refactor Receive accounting Clean up: Divide the work cleanly: - rpcrdma_wc_receive is responsible only for RDMA Receives - rpcrdma_reply_handler is responsible only for RPC Replies - the posted send and receive counts both belong in rpcrdma_ep Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:16 UTC
b674c4b Chuck Lever 19 December 2018, 15:58:19 UTC xprtrdma: Ensure MRs are DMA-unmapped when posting LOCAL_INV fails The recovery case in frwr_op_unmap_sync needs to DMA unmap each MR. frwr_release_mr does not DMA-unmap, but the recycle worker does. Fixes: 61da886bf74e ("xprtrdma: Explicitly resetting MRs is ... ") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:16 UTC
e2f34e2 Chuck Lever 19 December 2018, 15:58:13 UTC xprtrdma: Yet another double DMA-unmap While chasing yet another set of DMAR fault reports, I noticed that the frwr recycler conflates whether or not an MR has been DMA unmapped with frwr->fr_state. Actually the two have only an indirect relationship. It's in fact impossible to guess reliably whether the MR has been DMA unmapped based on its fr_state field, especially as the surrounding code and its assumptions have changed over time. A better approach is to track the DMA mapping status explicitly so that the recycler is less brittle to unexpected situations, and attempts to DMA-unmap a second time are prevented. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # v4.20 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 02 January 2019, 17:05:16 UTC
8e143b9 Linus Torvalds 01 January 2019, 23:55:29 UTC Merge tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - Page table code for AMD IOMMU now supports large pages where smaller page-sizes were mapped before. VFIO had to work around that in the past and I included a patch to remove it (acked by Alex Williamson) - Patches to unmodularize a couple of IOMMU drivers that would never work as modules anyway. - Work to unify the the iommu-related pointers in 'struct device' into one pointer. This work is not finished yet, but will probably be in the next cycle. - NUMA aware allocation in iommu-dma code - Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver - Scalable mode support for the Intel VT-d driver - PM runtime improvements for the ARM-SMMU driver - Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom - Various smaller fixes and improvements * tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits) iommu: Check for iommu_ops == NULL in iommu_probe_device() ACPI/IORT: Don't call iommu_ops->add_device directly iommu/of: Don't call iommu_ops->add_device directly iommu: Consolitate ->add/remove_device() calls iommu/sysfs: Rename iommu_release_device() dmaengine: sh: rcar-dmac: Use device_iommu_mapped() xhci: Use device_iommu_mapped() powerpc/iommu: Use device_iommu_mapped() ACPI/IORT: Use device_iommu_mapped() iommu/of: Use device_iommu_mapped() driver core: Introduce device_iommu_mapped() function iommu/tegra: Use helper functions to access dev->iommu_fwspec iommu/qcom: Use helper functions to access dev->iommu_fwspec iommu/of: Use helper functions to access dev->iommu_fwspec iommu/mediatek: Use helper functions to access dev->iommu_fwspec iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec iommu/dma: Use helper functions to access dev->iommu_fwspec iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec ACPI/IORT: Use helper functions to access dev->iommu_fwspec iommu: Introduce wrappers around dev->iommu_fwspec ... 01 January 2019, 23:55:29 UTC
78e8696 Linus Torvalds 01 January 2019, 23:45:48 UTC Merge tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine updates from Vinod Koul: "This includes a new driver, removes R-Mobile APE6 as it is no longer used, sprd cyclic dma support, last batch of dma_slave_config direction removal and random updates to bunch of drivers. Summary: - New driver for UniPhier MIO DMA controller - Remove R-Mobile APE6 support - Sprd driver updates and support for cyclic link-list - Remove dma_slave_config direction usage from rest of drivers - Minor updates to dmatest, dw-dmac, zynqmp and bcm dma drivers" * tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (48 commits) dmaengine: qcom_hidma: convert to DEFINE_SHOW_ATTRIBUTE dmaengine: pxa: remove DBGFS_FUNC_DECL() dmaengine: mic_x100_dma: convert to DEFINE_SHOW_ATTRIBUTE dmaengine: amba-pl08x: convert to DEFINE_SHOW_ATTRIBUTE dmaengine: Documentation: Add documentation for multi chan testing dmaengine: dmatest: Add transfer_size parameter dmaengine: dmatest: Add alignment parameter dmaengine: dmatest: Use fixed point div to calculate iops dmaengine: dmatest: Add support for multi channel testing dmaengine: rcar-dmac: Document R8A774C0 bindings dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0 dmaengine: zynqmp_dma: replace spin_lock_bh with spin_lock_irqsave dmaengine: sprd: Add me as one of the module authors dmaengine: sprd: Support DMA 2-stage transfer mode dmaengine: sprd: Support DMA link-list cyclic callback dmaengine: sprd: Set cur_desc as NULL when free or terminate one dma channel dmaengine: sprd: Fix the last link-list configuration dmaengine: sprd: Get transfer residue depending on the transfer direction dmaengine: sprd: Remove direction usage from struct dma_slave_config dmaengine: dmatest: fix a small memory leak in dmatest_func() ... 01 January 2019, 23:45:48 UTC
fcf0104 Linus Torvalds 01 January 2019, 23:38:14 UTC Merge tag 'kgdb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux Pull kgdb updates from Daniel Thompson: "Mostly clean ups although while Doug's was chasing down a odd lockdep warning he also did some work to improved debugger resilience when some CPUs fail to respond to the round up request. The main changes are: - Fixing a lockdep warning on architectures that cannot use an NMI for the round up plus related changes to make CPU round up and all CPU backtrace more resilient. - Constify the arch ops tables - A couple of other small clean ups Two of the three patchsets here include changes that spill over into arch/. Changes in the arch space are relatively narrow in scope (and directly related to kgdb). Didn't get comprehensive acks but all impacted maintainers were Cc:ed in good time" * tag 'kgdb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kgdb/treewide: constify struct kgdb_arch arch_kgdb_ops mips/kgdb: prepare arch_kgdb_ops for constness kdb: use bool for binary state indicators kdb: Don't back trace on a cpu that didn't round up kgdb: Don't round up a CPU that failed rounding up before kgdb: Fix kgdb_roundup_cpus() for arches who used smp_call_function() kgdb: Remove irq flags from roundup 01 January 2019, 23:38:14 UTC
fbea8c7 Linus Torvalds 01 January 2019, 23:35:55 UTC Merge tag 'for-linus' of git://github.com/openrisc/linux Pull OpenRISC update from Stafford Horne: "Just one change for 4.21: Update comments for name change or32 -> or1k from Geert Uytterhoeven" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: Fix broken paths to arch/or32 01 January 2019, 23:35:55 UTC
28e8c4b Linus Torvalds 01 January 2019, 21:24:31 UTC Merge tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - new %ptR printk format - rename core files - allow registration of multiple nvmem devices New driver: - i.MX system controller RTC Driver updates: - abx80x: handle voltage ioctls, correct binding doc - m41t80: correct month in alarm reads - pcf85363: add pcf85263 support - pcf8523: properly handle battery low flag - s3c: limit alarm to one year in the future as ALMYEAR is broken - sun6i: rework clock output binding" * tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits) rtc: rename core files rtc: nvmem: fix possible use after free rtc: add i.MX system controller RTC support dt-bindings: fsl: scu: add rtc binding rtc: pcf2123: Add Microcrystal rv2123 rtc: class: reimplement devm_rtc_device_register rtc: enforce rtc_timer_init private_data type rtc: abx80x: Implement RTC_VL_READ,CLR ioctls rtc: pcf85363: Add support for NXP pcf85263 rtc dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock rtc: pcf8523: don't return invalid date when battery is low dt-bindings: rtc: use a generic node name for ds1307 PM: Switch to use %ptR m68k/mac: Switch to use %ptR Input: hp_sdc_rtc - Switch to use %ptR rtc: tegra: Switch to use %ptR rtc: s5m: Switch to use %ptR rtc: s3c: Switch to use %ptR rtc: rx8025: Switch to use %ptR rtc: rx6110: Switch to use %ptR ... 01 January 2019, 21:24:31 UTC
c9bef4a Linus Torvalds 01 January 2019, 21:19:16 UTC Merge tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "We have no core changes but lots of incremental development in drivers all over the place: Renesas, NXP, Mediatek and Actions Semiconductor keep churning out new SoCs. I have some subtree maintainers for Renesas and Intel helping out to keep down the load, it's been working smoothly (Samsung also have a subtree but it was not used this cycle.) New drivers: - NXP (ex Freescale) i.MX 8 QXP SoC driver. - Mediatek MT6797 SoC driver. - Mediatek MT7629 SoC driver. - Actions Semiconductor S700 SoC driver. - Renesas RZ/A2 SoC driver. - Allwinner sunxi suniv F1C100 SoC driver. - Qualcomm PMS405 PMIC driver. - Microsemi Ocelot Jaguar2 SoC driver. Improvements: - Some RT improvements (using raw spinlocks where appropriate). - A lot of new pin sets on the Renesas PFC pin controllers. - GPIO hogs now work on the Qualcomm SPMI/SSBI pin controller GPIO chips, and Xway. - Major modernization of the Intel pin control drivers. - STM32 pin control driver will now synchronize usage of pins with another CPU using a hardware spinlock" * tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (145 commits) dt-bindings: arm: fsl-scu: add imx8qm pinctrl support pinctrl: freescale: Break dependency on SOC_IMX8MQ for i.MX8MQ pinctrl: imx-scu: Depend on IMX_SCU pinctrl: ocelot: Add dependency on HAS_IOMEM pinctrl: ocelot: add MSCC Jaguar2 support pinctrl: bcm: ns: support updated DT binding as syscon subnode dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon MAINTAINERS: merge at91 pinctrl entries pinctrl: imx8qxp: break the dependency on SOC_IMX8QXP pinctrl: uniphier: constify uniphier_pinctrl_socdata pinctrl: mediatek: improve Kconfig dependencies pinctrl: msm: mark PM functions as __maybe_unused dt-bindings: pinctrl: sunxi: Add supply properties pinctrl: meson: meson8b: add the missing GPIO_GROUPs for BOOT and CARD pinctrl: meson: meson8: add the missing GPIO_GROUPs for BOOT and CARD pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs" pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs" pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins pinctrl: sh-pfc: Make pinmux_cfg_reg.var_field_width[] variable-length ... 01 January 2019, 21:19:16 UTC
115502a Linus Torvalds 01 January 2019, 21:16:45 UTC Merge tag 'linux-watchdog-4.21-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add TQ-Systems TQMX86 watchdog driver - add Qualcomm PM8916 watchdog driver - w83627hf_wdt: add quirk for Inves system - renesas_wdt: several improvements and document r8a774c0 support - mena21_wdt, mtx-1: Convert to use GPIO descriptor - bcm281xx, ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE - documentation: add PM usage and kernel-api: don't reference removed functions - update bindings for MT7629 SoC - several small fixes * tag 'linux-watchdog-4.21-rc1' of git://www.linux-watchdog.org/linux-watchdog: (22 commits) watchdog: tqmx86: Add watchdog driver for the IO controller dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support watchdog: docs: kernel-api: don't reference removed functions watchdog: add documentation for PM usage watchdog: mtx-1: Convert to use GPIO descriptor watchdog: mena21_wdt: Convert to GPIO descriptors dt-bindings: watchdog: Add Qualcomm PM8916 watchdog watchdog: Add pm8916 watchdog driver dt-bindings: watchdog: update bindings for MT7629 SoC watchdog: renesas_wdt: don't keep timer value during suspend/resume watchdog: ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE watchdog: bcm281xx: convert to DEFINE_SHOW_ATTRIBUTE watchdog: asm9260_wdt: make array mode_name static, shrinks object size watchdog/hpwdt: Update driver version. watchdog/hpwdt: Do not claim unsupported hardware watchdog/hpwdt: Exclude via blacklist Watchdog: remove outdated comment watchdog: w83627hf_wdt: Add quirk for Inves system watchdog: cpwd: add of_node_put() watchdog: renesas_wdt: don't set divider while watchdog is running ... 01 January 2019, 21:16:45 UTC
57b0e31 Eric Biggers 03 November 2018, 17:30:35 UTC KEYS: fix parsing invalid pkey info string We need to check the return value of match_token() for Opt_err before doing anything with it. [ Not only did the old "-1" value for Opt_err cause problems for the __test_and_set_bit(), as fixed in commit 94c13f66e13c ("security: don't use a negative Opt_err token index"), but accessing "args[0].from" is invalid for the Opt_err case, as pointed out by Eric later. - Linus ] Reported-by: syzbot+a22e0dc07567662c50bc@syzkaller.appspotmail.com Fixes: 00d60fd3b932 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]") Signed-off-by: Eric Biggers <ebiggers@google.com> Cc: stable@kernel.org # 4.20 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 January 2019, 21:13:19 UTC
e888402 Huazhong Tan 31 December 2018, 02:58:29 UTC net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT For HNAE3_DOWN_CLIENT calling hns3_nic_net_stop(), HNAE3_UP_CLIENT should call hns3_nic_net_open(), since if the number of queue or the map of TC has is changed before HHAE3_UP_CLIENT is called, it will cause problem. Also the HNS3_NIC_STATE_RESETTING flag needs to be cleared before hns3_nic_net_open() called, and set it back while hns3_nic_net_open() failed. Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 January 2019, 20:13:44 UTC
cb9f1b7 Willem de Bruijn 30 December 2018, 22:24:36 UTC ip: validate header length on virtual device xmit KMSAN detected read beyond end of buffer in vti and sit devices when passing truncated packets with PF_PACKET. The issue affects additional ip tunnel devices. Extend commit 76c0ddd8c3a6 ("ip6_tunnel: be careful when accessing the inner header") and commit ccfec9e5cb2d ("ip_tunnel: be careful when accessing the inner header"). Move the check to a separate helper and call at the start of each ndo_start_xmit function in net/ipv4 and net/ipv6. Minor changes: - convert dev_kfree_skb to kfree_skb on error path, as dev_kfree_skb calls consume_skb which is not for error paths. - use pskb_network_may_pull even though that is pedantic here, as the same as pskb_may_pull for devices without llheaders. - do not cache ipv6 hdrs if used only once (unsafe across pskb_may_pull, was more relevant to earlier patch) Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 January 2019, 20:05:02 UTC
8c76e77 Willem de Bruijn 30 December 2018, 22:21:05 UTC tap: call skb_probe_transport_header after setting skb->dev The BPF flow dissector expects either skb->sk or skb->dev set on all skbs. Delay flow dissection until after skb->dev is set. This requires calling from within an rcu read-side critical section. That is fine, see also the call from tun_xdp_one. Fixes: d0e13a1488ad ("flow_dissector: lookup netns by skb->sk if skb->dev is NULL") Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 January 2019, 20:01:02 UTC
aff6db4 Cong Wang 30 December 2018, 20:43:42 UTC ptr_ring: wrap back ->producer in __ptr_ring_swap_queue() __ptr_ring_swap_queue() tries to move pointers from the old ring to the new one, but it forgets to check if ->producer is beyond the new size at the end of the operation. This leads to an out-of-bound access in __ptr_ring_produce() as reported by syzbot. Reported-by: syzbot+8993c0fa96d57c399735@syzkaller.appspotmail.com Fixes: 5d49de532002 ("ptr_ring: resize support") Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 January 2019, 19:58:33 UTC
3e9ad24 Takashi Iwai 31 December 2018, 18:02:01 UTC ALSA: hda - Revert DSP detection on legacy HD-audio driver This essentially reverts the commits c337104b1a16 ("ALSA: HD-Audio: SKL+: abort probe if DSP is present and Skylake driver selected") and d82b51c855a2 ("ALSA: HD-Audio: SKL+: force HDaudio legacy or SKL+ driver selection") for the path of legacy HD-audio controller (snd-hda-intel). The automatic DSP detection and skip of binding with the legacy driver caused regressions on several machines like Dell XPS13. They give the PCI class 0x40380 indicating the availability of DSP while they don't work with ASoC SKL driver (yet). As the support of ASoC driver for such devices isn't available, it's better to revert the whole DSP-detection-and-skip behavior of the legacy driver, so that we can get the old good driver working on such devices. The pci_binding option for ASoC SKL driver is still kept so that it can work without blacklisting. Fixes: c337104b1a16 ("ALSA: HD-Audio: SKL+: abort probe if DSP is present and Skylake driver selected") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Hans de Goede <hdegoede@redhat.com> Reported-by: Azat Khuzhin <dohardgopro@gmail.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 01 January 2019, 19:43:01 UTC
4087d2b Zhu Yanjun 30 December 2018, 15:24:11 UTC net: rds: remove unnecessary NULL check In kfree, the NULL check is done. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 January 2019, 17:54:19 UTC
2b96547 yupeng 30 December 2018, 05:46:38 UTC add document for TCP OFO, PAWS and skip ACK counters add document and examples for below counters: TcpExtTCPOFOQueue TcpExtTCPOFODrop TcpExtTCPOFOMerge TcpExtPAWSActive TcpExtPAWSEstab TcpExtTCPACKSkippedSynRecv TcpExtTCPACKSkippedPAWS TcpExtTCPACKSkippedSeq TcpExtTCPACKSkippedFinWait2 TcpExtTCPACKSkippedTimeWait TcpExtTCPACKSkippedChallenge Signed-off-by: yupeng <yupeng0921@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 January 2019, 17:51:14 UTC
3a0ed3e Deepa Dinamani 28 December 2018, 02:55:09 UTC sock: Make sock->sk_stamp thread-safe Al Viro mentioned (Message-ID <20170626041334.GZ10672@ZenIV.linux.org.uk>) that there is probably a race condition lurking in accesses of sk_stamp on 32-bit machines. sock->sk_stamp is of type ktime_t which is always an s64. On a 32 bit architecture, we might run into situations of unsafe access as the access to the field becomes non atomic. Use seqlocks for synchronization. This allows us to avoid using spinlocks for readers as readers do not need mutual exclusion. Another approach to solve this is to require sk_lock for all modifications of the timestamps. The current approach allows for timestamps to have their own lock: sk_stamp_lock. This allows for the patch to not compete with already existing critical sections, and side effects are limited to the paths in the patch. The addition of the new field maintains the data locality optimizations from commit 9115e8cd2a0c ("net: reorganize struct sock for better data locality") Note that all the instances of the sk_stamp accesses are either through the ioctl or the syscall recvmsg. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 January 2019, 17:47:59 UTC
8b6b25c Xiaozhou Liu 21 December 2018, 09:35:11 UTC selftests/bpf: fix error printing in test_devmap() As a simple fix, just print the correct map type. Signed-off-by: Xiaozhou Liu <liuxiaozhou@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> 01 January 2019, 12:48:59 UTC
63d2a9e Sameer Pujar 26 December 2018, 10:34:49 UTC ALSA: hda/tegra: clear pending irq handlers Even after disabling interrupts on the module, it could be possible that irq handlers are still running. System hang is seen during suspend path. It was found that, there were pending writes on the HDA bus and clock was disabled by that time. Above mentioned issue is fixed by clearing any pending irq handlers before disabling clocks and returning from hda suspend. Suggested-by: Mohan Kumar <mkumard@nvidia.com> Suggested-by: Dara Ramesh <dramesh@nvidia.com> Signed-off-by: Sameer Pujar <spujar@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 01 January 2019, 08:31:37 UTC
82b0114 Jian-Hong Pan 27 December 2018, 08:46:31 UTC ALSA: hda/realtek: Enable the headset mic auto detection for ASUS laptops The headset mic of ASUS laptops like UX533FD, UX433FN and UX333FA, whose CODEC is Realtek ALC294 has jack auto detection feature. This patch enables the feature. Fixes: 4e051106730d ("ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294") Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 01 January 2019, 08:30:04 UTC
e1ef035 Linus Torvalds 01 January 2019, 01:40:14 UTC Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC defconfig updates from Olof Johansson: "Most changes here are to enable new drivers and platforms in the various configs that affect them. Most of these have been covered and described in the other branches, we mostly keep defconfig separate to avoid conflicts between SoC/dt/driver updates that they otherwise would be grouped with. One thing worth mentioning here is that OMAP changes from using their own UART driver, to 8250, for the multi_v7_defconfig shared config on 32-bit. This means that the console is now named ttyS* instead of ttyO*. This change was already done for omap2_defconfig a while back, so most users of these configs have either already updated, or can easily follow the same patterns as they did at that time. This makes platform support slightly easier for distros, since they no longer need to keep track of a separate console prefix for these platforms" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) Revert "arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO" arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO arm64: defconfig: Replace PINCTRL_MT7622 with PINCTRL_MTK_MOORE arm64: defconfig: Regenerate for v4.20 ARM: multi_v7_defconfig: Add TOSHIBA TC358764 bridge driver ARM: multi_v7_defconfig: Add MAX8952 regulator driver ARM: exynos_defconfig: Add TOSHIBA TC358764 bridge driver ARM: exynos_defconfig: Add MAX8952 regulator driver ARM: exynos_defconfig: Add MAX8998 RTC and charger drivers ARM: imx_v6_v7_defconfig: add imx7ulp support ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX ARM: multi_v7_defconfig: enable STM32 analog & timer drivers arm64: defconfig: Enable GCC and PINCTRL for MSM8998 arm64: defconfig: Enable core Qualcomm SDM845 options ARM: defconfig: Enable the PL111 DRM driver on vexpress ARM: defconfig: Update the vexpress defconfig arm64: defconfig: Enable some qcom remoteproc configs arm64: defconfig: Enable QCS404 configs ARM: imx_v6_v7_defconfig: Enable USB_ANNOUNCE_NEW_DEVICES ARM: imx_v6_v7_defconfig: Enable BT_BNEP ... 01 January 2019, 01:40:14 UTC
back to top