Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
fd53f7d Linus Torvalds 31 August 2011, 16:02:06 UTC Merge branch 'for-linus' of git://neil.brown.name/md * 'for-linus' of git://neil.brown.name/md: md/raid5: fix a hang on device failure. md: fix clearing of 'blocked' flag in the presence of bad blocks. md/linear: avoid corrupting structure while waiting for rcu_free to complete. md: use REQ_NOIDLE flag in md_super_write() md: ensure changes to 'write-mostly' are reflected in metadata. md: report failure if a 'set faulty' request doesn't. 31 August 2011, 16:02:06 UTC
e9208a4 Linus Torvalds 31 August 2011, 15:58:36 UTC Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/p1023rds: Fix the error of bank-width of nor flash powerpc/85xx: enable caam crypto driver by default powerpc/85xx: enable the audio drivers in the defconfigs 31 August 2011, 15:58:36 UTC
43220aa NeilBrown 31 August 2011, 02:49:14 UTC md/raid5: fix a hang on device failure. Waiting for a 'blocked' rdev to become unblocked in the raid5d thread cannot work with internal metadata as it is the raid5d thread which will clear the blocked flag. This wasn't a problem in 3.0 and earlier as we only set the blocked flag when external metadata was used then. However we now set it always, so we need to be more careful. Signed-off-by: NeilBrown <neilb@suse.de> 31 August 2011, 02:49:14 UTC
0c81e4b Chunhe Lan 12 August 2011, 11:00:09 UTC powerpc/p1023rds: Fix the error of bank-width of nor flash In the p1023rds, a physical bus of nor flash is 16 bits width. The bank-width is width (in bytes) of the bus width. So, the value of bank-width of nor flash is not one, and it should be two. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> 31 August 2011, 02:27:33 UTC
e09e2fb Kim Phillips 22 July 2011, 20:48:08 UTC powerpc/85xx: enable caam crypto driver by default corenet based SoCs have SEC4 h/w, so enable the SEC4 driver, caam, and the algorithms it supports, and disable the SEC2/3 driver, talitos. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> 31 August 2011, 02:27:30 UTC
39c428f Timur Tabi 16 August 2011, 22:44:39 UTC powerpc/85xx: enable the audio drivers in the defconfigs Enable the audio drivers in the non-corenet 85xx defconfigs so that audio is enabled on the Freescale P1022DS reference board. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> 31 August 2011, 02:27:29 UTC
9e79e3e Linus Torvalds 30 August 2011, 18:28:18 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Only Panther cheetah+ chips have POPC. 30 August 2011, 18:28:18 UTC
ebde8b0 Linus Torvalds 30 August 2011, 17:34:24 UTC Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add s/r quirk for Compaq Presario V5245EU drm/radeon/kms: evergreen & ni reset SPI block on CP resume drm: Fix the number of connector and encoder to cleanup functions 30 August 2011, 17:34:24 UTC
bd82382 Geert Uytterhoeven 30 August 2011, 13:17:03 UTC bitops: Move find_next_bit.o from lib-y to obj-y If there are no builtin users of find_next_bit_le() and find_next_zero_bit_le(), these functions are not present in the kernel image, causing m68k allmodconfig to fail with: ERROR: "find_next_zero_bit_le" [fs/ufs/ufs.ko] undefined! ERROR: "find_next_bit_le" [fs/udf/udf.ko] undefined! ... This started to happen after commit 171d809df189 ("m68k: merge mmu and non-mmu bitops.h"), as m68k had its own inline versions before. commit 63e424c84429 ("arch: remove CONFIG_GENERIC_FIND_{NEXT_BIT, BIT_LE, LAST_BIT}") added find_last_bit.o to obj-y (so it's always included), but find_next_bit.o to lib-y (so it gets removed by the linker if there are no builtin users). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 August 2011, 17:12:05 UTC
302a8e8 Alex Deucher 29 August 2011, 14:55:25 UTC drm/radeon/kms: add s/r quirk for Compaq Presario V5245EU Fixes resume on Compaq Presario V5245EU. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=41642 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 30 August 2011, 09:55:20 UTC
a49a50d Jerome Glisse 24 August 2011, 20:00:17 UTC drm/radeon/kms: evergreen & ni reset SPI block on CP resume For some reason SPI block is in broken state after module unloading. This lead to broken rendering after reloading module. Fix this by reseting SPI block in CP resume function Signed-off-by: Jerome Glisse <jglisse@redhat.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 30 August 2011, 09:55:10 UTC
7da64a0 NeilBrown 30 August 2011, 06:20:17 UTC md: fix clearing of 'blocked' flag in the presence of bad blocks. When the 'blocked' flag on a device is cleared while there are unacknowledged bad blocks we must fail the device. This is needed for backwards compatability of the interface. The code currently uses the wrong test for "unacknowledged bad blocks exist". Change it to the right test. Signed-off-by: NeilBrown <neilb@suse.de> 30 August 2011, 06:20:17 UTC
1a8e0da David S. Miller 30 August 2011, 04:14:29 UTC sparc64: Only Panther cheetah+ chips have POPC. Signed-off-by: David S. Miller <davem@davemloft.net> 30 August 2011, 04:14:29 UTC
90e9364 Linus Torvalds 29 August 2011, 23:34:07 UTC Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm * 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: pm: avoid writing the auxillary control register for ARMv7 ARM: pm: some ARMv7 requires a dsb in resume to ensure correctness ARM: pm: arm920/926: fix number of registers saved ARM: pm: CPU specific code should not overwrite r1 (v:p offset) ARM: 7066/1: proc-v7: disable SCTLR.TE when disabling MMU ARM: 7065/1: kexec: ensure new kernel is entered in ARM state ARM: 7003/1: vexpress: Add clock definition for the SP805. ARM: 7051/1: cpuimx* boards: fix mach-types errors ARM: 7019/1: Footbridge: select CLKEVT_I8253 for ARCH_NETWINDER ARM: 7015/1: ARM errata: Possible cache data corruption with hit-under-miss enabled ARM: 7014/1: cache-l2x0: Fix L2 Cache size calculation. ARM: 6967/1: ep93xx: ts72xx: fix board model detection ARM: 6965/1: ep93xx: add model detection for ts-7300 and ts-7400 boards ARM: cache: detect VIPT aliasing I-cache on ARMv6 ARM: twd: register clockevents device before enabling PPI ARM: realview: ensure visibility of writes during reset ARM: perf: make name of arm_pmu_type consistent ARM: perf: fix prototype of release_pmu ARM: fix perf build with uclibc toolchains 29 August 2011, 23:34:07 UTC
3ae627b Linus Torvalds 29 August 2011, 23:33:32 UTC Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: mach-footbridge: add missing header file <video/vga.h> ARM: mach-orion5x: add missing header file <linux/vga.h> arm: fix compile failure in orion5x/dns323-setup.c at91: at91sam9261.c: fix typo in t2_clk alias for atmel_tcb.0 ARM: S5P: fix bug in spdif_clk_get_rate ARM: EXYNOS4: Add restart hook for proper reboot ARM: EXYNOS4: Increase reset delay for USB HOST PHY ARM: S5P: add required chained_irq_enter/exit to gpio-int code ARM: EXYNOS4: add required chained_irq_enter/exit to eint code ARM: SAMSUNG: Add chained enrty/exit call to timer interrupt handler ARM: S3C64XX: Fix build break in PM debug ARM: S5PV210: Fix build warning ARM: EXYNOS4: Fix the IRQ definitions for MIPI CSIS device ARM: EXYNOS4: remove duplicated inclusion ARM: EXYNOS4: Fix wrong devname to support clkdev ARM: EXYNOS4: Use the correct regulator names on universal_c210 ARM: SAMSUNG: Fix Section mismatch in samsung_bl_set() ARM: S5P64X0: Replace irq_gc_ack() with irq_gc_ack_set_bit() 29 August 2011, 23:33:32 UTC
d4d7b2a Stephen Rothwell 29 August 2011, 00:38:57 UTC remove remaining references to nfsservctl These were missed in commit f5b940997397 "All Arch: remove linkage for sys_nfsservctl system call" due to them having no sys_ prefix (presumably). Cc: NeilBrown <neilb@suse.de> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-parisc@vger.kernel.org Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: James Bottomley <James.Bottomley@hansenpartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 August 2011, 23:31:59 UTC
0f43dd5 Linus Torvalds 29 August 2011, 20:38:29 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits) netpoll: fix incorrect access to skb data in __netpoll_rx cassini: init before use in cas_interruptN. can: ti_hecc: Fix uninitialized spinlock in probe can: ti_hecc: Fix unintialized variable net: sh_eth: fix the compile error net/phy: fix DP83865 phy interrupt handler sendmmsg/sendmsg: fix unsafe user pointer access ibmveth: Fix leak when recycling skb and hypervisor returns error arp: fix rcu lockdep splat in arp_process() bridge: fix a possible use after free bridge: Pseudo-header required for the checksum of ICMPv6 mcast: Fix source address selection for multicast listener report MAINTAINERS: Update GIT trees for network development ath9k: Fix PS wrappers in ath9k_set_coverage_class carl9170: Fix mismatch in carl9170_op_set_key mutex lock-unlock wl12xx: add max_sched_scan_ssids value to the hw description wl12xx: Fix validation of pm_runtime_get_sync return value wl12xx: Remove obsolete testmode NVS push command bcma: add uevent to the bus, to autoload drivers ath9k_hw: Fix STA (AR9485) bringup issue due to incorrect MAC address ... 29 August 2011, 20:38:29 UTC
2cd6c7f Linus Torvalds 29 August 2011, 20:37:42 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc32,sun4d: Change IPI IRQ level to prevent collision between IPI and timer interrupt sparc: Remove another reference to nfsservctl 29 August 2011, 20:37:42 UTC
380dc20 Linus Torvalds 29 August 2011, 20:37:17 UTC Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: ARM: mach-shmobile: sh7372 CMT3 and CMT4 clock support ARM: mach-shmobile: sh7372 MSIOF clock support ARM: mach-shmobile: clock-sh7372: fixup USB-DMAC1 settings ARM: mach-shmobile: clock-sh73a0: tidyup CKSCR main clock selecter ARM: mach-shmobile: Remove 3DG/SGX from sh7372 INTCS ARM: mach-shmobile: mackerel: Add USB-DMA ID mmc: sdhi, mmcif: zboot: Correct clock disable logic ARM: mach-shmobile: ag5evm: SDHI requires waiting for idle ARM: static should be at beginning of declaration ARM: mach-shmobile: Use CMT2 for timer on sh7372 ARM: mach-shmobile: sh7372: Add USB-DMAC support 29 August 2011, 20:37:17 UTC
c42a263 Linus Torvalds 29 August 2011, 20:34:48 UTC Merge branch 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x * 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: sh: fix the compile error in setup-sh7757.c serial: sh-sci: report CTS as active for get_mctrl sh: Add unaligned memory access for PC relative intructions sh: Fix unaligned memory access for branches without delay slots sh: Fix up fallout from cpuidle changes. serial: sh-sci: console Runtime PM support sh: Fix conflicting definitions of ptrace_triggered serial: sh-sci: fix DMA build by including dma-mapping.h serial: sh-sci: Fix up default regtype probing. sh: intc: enable both edges GPIO interrupts on sh7372 shwdt: fix usage of mod_timer clocksource: sh_cmt: wait for CMCNT on init V2 29 August 2011, 20:34:48 UTC
f9557a4 Florian Tobias Schandinat 27 August 2011, 19:32:34 UTC MAINTAINERS: change framebuffer maintainer As Paul has not much time for it I take over maintaining the framebuffer subsystem. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 August 2011, 17:13:29 UTC
38f7f8f Kjetil Oftedal 28 August 2011, 22:16:28 UTC sparc32,sun4d: Change IPI IRQ level to prevent collision between IPI and timer interrupt On Sun4d systems running in SMP mode, IRQ 14 is used for timer interrupts and has a specialized interrupt handler. IPI is currently set to use IRQ 14 as well, which causes it to trigger the timer interrupt handler, and not the IPI interrupt handler. The IPI interrupt is therefore changed to IRQ 13, which is the highest normally handled interrupt. This IRQ is also used for SBUS interrupts, however there is nothing in the IPI/SBUS interrupt handlers that indicate that they will not handle sharing the interrupt. (IRQ 13 is indicated as audio interrupt, which is unlikely to be found in a sun4d system) Signed-off-by: Kjetil Oftedal <oftedal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 August 2011, 16:20:40 UTC
2ee04a1 Stephen Rothwell 29 August 2011, 05:43:40 UTC sparc: Remove another reference to nfsservctl Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> 29 August 2011, 16:19:24 UTC
6380c50 Joonyoung Shim 27 August 2011, 02:06:21 UTC drm: Fix the number of connector and encoder to cleanup functions It is left out the code to decrease the number of connector and encoder to the cleanup functions. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 29 August 2011, 10:47:35 UTC
a408bae Magnus Damm 26 August 2011, 05:28:42 UTC ARM: mach-shmobile: sh7372 CMT3 and CMT4 clock support Add clock control support for sh7372 CMT hardware blocks. No upstream sh7372 boards are making use of CMT3 + CMT4, but the sh7372 hardware happens to come out of reset with all CMT MSTP clocks _enabled_, so to save power we need to implement a fix in software to shut down unused clocks. This patch relies on the recently merged 794d78f drivers: sh: late disabling of clocks V2 to make sure the unused clocks get disabled as expected. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 29 August 2011, 07:41:02 UTC
7ceb666 Magnus Damm 26 August 2011, 05:25:11 UTC ARM: mach-shmobile: sh7372 MSIOF clock support Add clock control support for sh7372 MSIOF hardware blocks. No upstream sh7372 boards are making use of MSIOF0->2, but the sh7372 hardware happens to come out of reset with all MSIOF MSTP clocks _enabled_, so to save power we need to implement a fix in software to shut down unused clocks. This patch relies on the recently merged 794d78f drivers: sh: late disabling of clocks V2 to make sure the unused clocks get disabled as expected. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 29 August 2011, 07:39:58 UTC
6b4cb8f Kuninori Morimoto 25 August 2011, 03:47:42 UTC ARM: mach-shmobile: clock-sh7372: fixup USB-DMAC1 settings USB-DMAC1 needs SMSTPCR4/MSTP407 controls, not MSTP214 this patch tested on mackerel board Reported-by: Magnus Damm <damm@opensource.se> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 29 August 2011, 07:37:38 UTC
86d8408 Kuninori Morimoto 26 August 2011, 07:27:45 UTC ARM: mach-shmobile: clock-sh73a0: tidyup CKSCR main clock selecter MAINCKSEL is [29:28], not [27:24] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 29 August 2011, 07:22:39 UTC
4861da4 Magnus Damm 10 August 2011, 05:45:30 UTC ARM: mach-shmobile: Remove 3DG/SGX from sh7372 INTCS This patch removes support for the SGX interrupt source in the sh7372 INTCS controller. The SGX hardware block included in sh7372 is already hooked up to the ARM Cortex-A8 core using the INTCA controller, so SGX users are encouraged to make use of that interrupt source instead. Removing support for the SGX interrupt source in INTCS simplifies the sh7372 power management code by allowing us to assume that only INTCA needs to be powered on to operate the SGX hardware. If the INTCS interrupt source would be kept then the kernel would be forced to deal with additional dependencies that does not follow the regular power domain hiearachy. With this patch in place we can safely power down INTCS while the SGX is operating. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 29 August 2011, 07:13:10 UTC
8a1c049 Paul Mundt 29 August 2011, 07:10:24 UTC Merge branch 'rmobile/dma' into rmobile-fixes-for-linus 29 August 2011, 07:10:24 UTC
21d41f2 Yoshihiro Shimoda 23 August 2011, 09:15:46 UTC sh: fix the compile error in setup-sh7757.c Fix the following build errors: CC arch/sh/kernel/cpu/sh4a/setup-sh7757.o arch/sh/kernel/cpu/sh4a/setup-sh7757.c:681: error: implicit declaration of function ‘DMA_BIT_MASK’ arch/sh/kernel/cpu/sh4a/setup-sh7757.c:681: error: initializer element is not constant arch/sh/kernel/cpu/sh4a/setup-sh7757.c:681: error: (near initialization for ‘usb_ehci_device.dev.coherent_dma_mask’) arch/sh/kernel/cpu/sh4a/setup-sh7757.c:705: error: initializer element is not constant arch/sh/kernel/cpu/sh4a/setup-sh7757.c:705: error: (near initialization for ‘usb_ohci_device.dev.coherent_dma_mask’) make[3]: *** [arch/sh/kernel/cpu/sh4a/setup-sh7757.o] Error 1 Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 29 August 2011, 06:47:38 UTC
4480a68 Yoshii Takashi 23 August 2011, 08:27:18 UTC serial: sh-sci: report CTS as active for get_mctrl sh-sci.c sets hardware up and then let the HW do all flow controls. There is no software code, nor needs to get/set real CTS signal. But, when turning CRTSCTS on through termios, uart_set_termios() in serial_core.c checks CTS, and stops TX if it is inactive at the moment. Because sci_get_mctrl() returns a fixed value DTR|RTS|DSR but CTS, the sequence open -> set CRTSCTS -> write hit the case and stop working, no more outputs. This patch makes sci_get_mctrl() report CTS in addition. Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 29 August 2011, 06:47:33 UTC
34f7145 Phil Edworthy 24 August 2011, 10:43:59 UTC sh: Add unaligned memory access for PC relative intructions This adds unaligned memory access support for the following instructions: mov.w @(disp,PC),Rn mov.l @(disp,PC),Rn These instructions are often used on SH2A toolchains. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 29 August 2011, 06:32:10 UTC
0710b91 Phil Edworthy 22 August 2011, 15:56:08 UTC sh: Fix unaligned memory access for branches without delay slots This patch just clears the return code for those cases where an unaligned memory access occurs on branch instructions without a delay slot. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 29 August 2011, 06:32:04 UTC
c6a389f Linus Torvalds 29 August 2011, 04:16:01 UTC Linux 3.1-rc4 29 August 2011, 04:16:01 UTC
c11a7e2 Linus Torvalds 28 August 2011, 17:05:39 UTC Merge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ARM: mach-shmobile: sh7372 LCDC1 suspend fix V2 (incremental) OMAP: omap_device: only override _noirq methods, not normal suspend/resume PM / Runtime: Correct documentation of pm_runtime_irq_safe() ARM: mach-shmobile: sh7372 LCDC1 suspend fix sh-sci / PM: Use power.irq_safe PM: Use spinlock instead of mutex in clock management functions 28 August 2011, 17:05:39 UTC
2590415 Russell King 26 August 2011, 21:44:59 UTC ARM: pm: avoid writing the auxillary control register for ARMv7 For ARMv7 kernels running in the non-secure world, writing to the auxillary control register causes an abort, so we must avoid directly writing the auxillary control register. If the ACR has already been reinitialized by SoC code, don't try to restore it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 28 August 2011, 09:39:54 UTC
f35235a Russell King 26 August 2011, 23:37:38 UTC ARM: pm: some ARMv7 requires a dsb in resume to ensure correctness Add a dsb after the isb to ensure that the previous writes to the CP15 registers take effect before we enable the MMU. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 28 August 2011, 09:39:54 UTC
1c0270c Russell King 27 August 2011, 10:43:14 UTC ARM: pm: arm920/926: fix number of registers saved ARM920 and ARM926 save four registers, not three. Fix the size of the suspend region required. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 28 August 2011, 09:39:54 UTC
6f354e5 Russell King 27 August 2011, 10:37:58 UTC ARM: pm: CPU specific code should not overwrite r1 (v:p offset) r1 stores the v:p offset from the CPU invariant resume code, and is expected to be preserved by the CPU specific code. Overwriting it is not a good idea. We've managed to get away with it on sa1100 platforms because most happen to have PHYS_OFFSET == PAGE_OFFSET, but that may not be the case depending on kernel configuration. So fix this latent bug. This fixes xsc3 as well which was saving and restoring this register independently. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 28 August 2011, 09:39:53 UTC
0f81bb6 Will Deacon 26 August 2011, 15:34:51 UTC ARM: 7066/1: proc-v7: disable SCTLR.TE when disabling MMU cpu_v7_reset disables the MMU and then branches to the provided address. On Thumb-2 kernels, we should take care to clear the Thumb Exception enable bit in the System Control Register, otherwise this may wreak havok in the code to which we are branching (for example, an ARM kernel image via kexec). Reviewed-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 28 August 2011, 09:39:53 UTC
552e0c8 Will Deacon 26 August 2011, 15:32:57 UTC ARM: 7065/1: kexec: ensure new kernel is entered in ARM state Commit 540b5738 ("ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state") mandates that the kernel should be entered in ARM state. If a Thumb-2 kernel kexecs a new kernel image, we need to ensure that we change state when branching to the new code. This patch replaces a mov pc, lr with a bx lr on Thumb-2 kernels so that we transition to ARM state if need be. Reviewed-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 28 August 2011, 09:39:41 UTC
219f358 Linus Torvalds 27 August 2011, 16:32:08 UTC Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: fix panic after rmmod with slow targets 27 August 2011, 16:32:08 UTC
d0168fd Magnus Damm 27 August 2011, 12:21:00 UTC ARM: mach-shmobile: sh7372 LCDC1 suspend fix V2 (incremental) This patch updates the recently submitted "Associate the HDMI clock together with LCDC1 on sh7372" to V2 with the following change: - Use lcdc1_device on AP4EVB to build properly. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> 27 August 2011, 12:21:00 UTC
f5b9409 NeilBrown 26 August 2011, 22:03:11 UTC All Arch: remove linkage for sys_nfsservctl system call The nfsservctl system call is now gone, so we should remove all linkage for it. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 August 2011, 22:09:58 UTC
b727d20 Linus Torvalds 26 August 2011, 22:00:49 UTC Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915: Fix wrong initializer for "locked" variable in assert_panel_unlocked i915: do not setup intel_backlight twice 26 August 2011, 22:00:49 UTC
7a54f5e Linus Torvalds 26 August 2011, 20:10:06 UTC Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (30 commits) USB: ftdi_sio: add Calao reference board support USB option driver K3765/K4505 avoid CDC_DATA interface USB: option: add YUGA device id to driver usb: s5p-ehci: fix a NULL pointer deference USB: EHCI: Do not rely on PORT_SUSPEND to stop USB resuming in ehci_bus_resume(). USB option driver add PID of Huawei Vodafone K4605 USB option driver add PID of Huawei Vodafone K3806 xhci: Handle zero-length isochronous packets. USB: Avoid NULL pointer deref in usb_hcd_alloc_bandwidth. usb: musb: gadget: fix error path usb: gadget: f_phonet: unlock in error case usb: musb: blackfin: include prefetch head file usb: musb: tusb6010: fix compilation usb: gadget: renesas_usbhs: fix DMA build by including dma-mapping.h usb: musb: cppi: fix build errors due to DBG and missing musb variable usb: musb: ux500: replace missing DBG with dev_dbg usb: musb: ux500: set dma config for both src and dst usb: musb: fix oops on musb_gadget_pullup usb: host: ehci-omap: fix .remove and failure handling path of .probe(v1) usb: gadget: hid: don't STALL when processing a HID Descriptor request ... 26 August 2011, 20:10:06 UTC
efe45ab Linus Torvalds 26 August 2011, 20:06:06 UTC Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: omap-serial: Allow IXON and IXOFF to be disabled. TTY: serial, document ignoring of uart->ops->startup error TTY: pty, fix pty counting 8250: Fix race condition in serial8250_backup_timeout(). serial/8250_pci: delete duplicate data definition 8250_pci: add support for Rosewill RC-305 4x serial port card tty: Add "spi:" prefix for spi modalias atmel_serial: fix atmel_default_console_device serial: 8250_pnp: add Intermec CV60 touchscreen device drivers/serial/ucc_uart.c: Fix compiler warning pch_uart: Set PCIe bus number using probe parameter serial: samsung: Fix build error 26 August 2011, 20:06:06 UTC
3ab4702 Linus Torvalds 26 August 2011, 20:05:09 UTC Merge branch 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6 * 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: drivers:misc: ti-st: fix unexpected UART close drivers:misc: ti-st: free skb on firmware download drivers:misc: ti-st: wait for completion at fail drivers:misc: ti-st: reinit completion before send drivers:misc: ti-st: fail-safe on wrong pkt type drivers:misc: ti-st: reinit completion on ver read drivers:misc:ti-st: platform hooks for chip states drivers:misc: ti-st: avoid a misleading dbg msg base/devres.c: quiet sparse noise about context imbalance pti: add missing CONFIG_PCI dependency drivers/base/devtmpfs.c: correct annotation of `setup_done' driver core: fix kernel-doc warning in platform.c firmware: fix google/gsmi.c build warning 26 August 2011, 20:05:09 UTC
0cf0adb Linus Torvalds 26 August 2011, 20:03:12 UTC Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: staging: tidspbridge: fix compilation on dsp clock functions staging: octeon-ethernet: Add missing #includes. Staging: zcache: signedness bug in tmem_get() staging: zcache: fix crash on high memory swap staging: brcm80211: SPARC build error fix staging: brcm80211: fix compile error on non-x86 archs since 3.0 kernel 26 August 2011, 20:03:12 UTC
e9278a4 Eric Dumazet 26 August 2011, 06:26:15 UTC netpoll: fix incorrect access to skb data in __netpoll_rx __netpoll_rx() doesnt properly handle skbs with small header pskb_may_pull() or pskb_trim_rcsum() can change skb->data, we must reload it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 August 2011, 16:49:04 UTC
3d01556 françois romieu 25 August 2011, 05:02:49 UTC cassini: init before use in cas_interruptN. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Spotted-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 August 2011, 16:49:03 UTC
86ad47f Abhilash K V 23 August 2011, 03:05:57 UTC can: ti_hecc: Fix uninitialized spinlock in probe In ti_hecc_probe(), the spinlock priv->mbx_lock is not inited, causing a spinlock lockup BUG. Acked-by: Anant Gole <anantgole@ti.com> Signed-off-by: Abhilash K V <abhilash.kv@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 August 2011, 16:48:24 UTC
6f288cc Abhilash K V 23 August 2011, 03:05:48 UTC can: ti_hecc: Fix unintialized variable In ti_hecc_xmit(), local variable "data" is not initialized before being used. This initialization got inadvertently removed in the following patch: can: Unify droping of invalid tx skbs and netdev stats Acked-by: Anant Gole <anantgole@ti.com> Signed-off-by: Abhilash K V <abhilash.kv@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 August 2011, 16:48:24 UTC
69558ee Yoshihiro Shimoda 22 August 2011, 23:26:33 UTC net: sh_eth: fix the compile error Fix the following build error: CC drivers/net/sh_eth.o drivers/net/sh_eth.c:1115: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘sh_eth_interrupt’ drivers/net/sh_eth.c: In function ‘sh_eth_open’: drivers/net/sh_eth.c:1387: error: implicit declaration of function ‘request_irq’ drivers/net/sh_eth.c:1387: error: ‘sh_eth_interrupt’ undeclared (first use in this function) drivers/net/sh_eth.c:1387: error: (Each undeclared identifier is reported only once drivers/net/sh_eth.c:1387: error: for each function it appears in.) drivers/net/sh_eth.c:1391: error: ‘IRQF_SHARED’ undeclared (first use in this function) drivers/net/sh_eth.c:1424: error: implicit declaration of function ‘free_irq’ make[2]: *** [drivers/net/sh_eth.o] Error 1 Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 August 2011, 16:48:24 UTC
6e6f400 Giuseppe CAVALLARO 22 August 2011, 21:07:14 UTC net/phy: fix DP83865 phy interrupt handler According to the DP83865 datasheet we need to clear the interrupt status bit by writing a 1 to the corresponding bit in INT_CLEAR (2:0 are reserved). Proposed and tested by Thorsten. Signed-off-by: Thorsten Schubert <tshu@msc-ge.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 August 2011, 16:48:24 UTC
96d185c Linus Torvalds 26 August 2011, 16:28:22 UTC Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6 * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] memory hotplug: only unassign assigned increments [S390] Change default action from reipl to stop for on_restart [S390] arch/s390/kernel/ipl.c: correct error detection check [S390] drivers/s390/block/dasd_ioctl.c: add missing kfree [S390] nss,initrd: kernel image and initrd must be in different segments 26 August 2011, 16:28:22 UTC
a94cc4e Kirill A. Shutemov 26 August 2011, 11:20:59 UTC sfi: table irq 0xFF means 'no interrupt' According to the SFI specification irq number 0xFF means device has no interrupt or interrupt attached via GPIO. Currently, we don't handle this special case and set irq field in *_board_info structs to 255. It leads to confusion in some drivers. Accelerometer driver tries to register interrupt 255, fails and prints "Cannot get IRQ" to dmesg. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 August 2011, 16:03:29 UTC
1e8d4e8 Linus Torvalds 26 August 2011, 16:01:30 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (32 commits) ALSA: hda: Conexant: Allow different output types to share DAC ASoC: Correct element count for WM8996 sidetone HPF ASoC: Tegra: wm8903 machine driver: Drop Ventana support ASoC: Add samsung maintainer ASoC: Add Springbank I/O card to Speyside Kconfig ALSA: hda/conexant - Enable ADC-switching for auto-mic mode, too ALSA: hda - Fix double-headphone/speaker paths for Cxt auto-parser ALSA: hda - Update jack-sense info even when no automute is set ALSA: hda - Fix output-path initialization for Realtek auto-parser sound/soc/fsl/mpc8610_hpcd.c: add missing of_node_put sound/soc/fsl/p1022_ds.c: add missing of_node_put sound/soc/ep93xx/ep93xx-i2s.c: add missing kfree sound/soc/kirkwood/kirkwood-i2s.c: add missing kfree ASoC: soc-core: use GFP_KERNEL flag for kmalloc in snd_soc_cnew sound/soc/fsl/fsl_dma.c: add missing of_node_put ASoC: Clear completions from late WM8996 FLL lock IRQs ASoC: Clear any outstanding WM8962 FLL lock completions before waiting ASoC: Ensure we only run Speyside WM8962 bias level callbacks once ASoC: Fix configuration of WM8996 input enables ASoC: WM8996 record paths need AIFCLK ... 26 August 2011, 16:01:30 UTC
039920c Arnd Bergmann 26 August 2011, 15:34:00 UTC Merge branch 'at91/fixes' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc into fixes 26 August 2011, 15:34:00 UTC
966843e Arnd Bergmann 26 August 2011, 15:27:34 UTC Merge branch 'fixes' of git://git.jdl.com/software/linux-3.0 into fixes 26 August 2011, 15:27:34 UTC
4a3f423 Arnd Bergmann 26 August 2011, 15:08:19 UTC Merge branch 'samsung/fixes' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc into fixes 26 August 2011, 15:08:19 UTC
e2e6be5 John W. Linville 26 August 2011, 14:33:51 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 26 August 2011, 14:33:51 UTC
2d0b579 Paul Mundt 26 August 2011, 07:49:51 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into sh-fixes-for-linus 26 August 2011, 07:49:51 UTC
26b9b55 Takashi Iwai 26 August 2011, 07:29:43 UTC Merge branch 'fix/asoc' into for-linus 26 August 2011, 07:29:43 UTC
671ee7f Liu Gang-B34182 25 August 2011, 22:59:25 UTC arch/powerpc/sysdev/fsl_rio.c: correct IECSR register clear value This bug causes the IECSR register clear failure. In this case, the RETE (retry error threshold exceeded) interrupt will be generated and cannot be cleared. So the related ISR may be called persistently. The RETE bit in IECSR is cleared by writing a 1 to it. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 August 2011, 01:51:06 UTC
62d1760 MyungJoo Ham 25 August 2011, 22:59:24 UTC drivers/rtc/rtc-s3c.c: allow multiple open / allow no-ioctl-open'ed rtc to have irq. The previous rtc-s3c had two issues related with its IRQ. 1. Users cannot open rtc multiple times because an open operation calls request_irq on the same IRQ. (e.g., two user processes wants to open and read RTC time from rtc-s3c at the same time) 2. If alarm is set and no one has the rtc opened with filesystem (either the alarm is set by kernel/boot-loader or user set an alarm and closed rtc dev file), the pending bit is not cleared and no further interrupt is invoked. When the alarm is used by the system itself such as a resume from suspend-to-RAM or other Low-power modes/idle, this is a critical issue. This patch mitigates these issues by calling request_irq at probe and free_irq at remove. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 August 2011, 01:51:00 UTC
4e8896c MyungJoo Ham 25 August 2011, 22:59:22 UTC drivers/rtc/rtc-s3c.c: correct debug messages RTC-S3C used to print out debug messages incorrectly. This patch corrects incorrect outputs. (undecoded bcd numbers, incorrectly decoded register values) This patch affects the pr-debug messages only. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 August 2011, 01:50:43 UTC
1424e21 Axel Lin 25 August 2011, 22:59:21 UTC drivers/leds/leds-bd2802.c: bd2802_unregister_led_classdev() should unregister all registered leds bd2802_unregister_led_classdev() should unregister all registered instances of led_classdev class that had registered by bd2802_register_led_classdev(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Kim Kyuwon <q1.kim@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:35 UTC
02016bc WANG Cong 25 August 2011, 22:59:20 UTC cris: add arch/cris/include/asm/serial.h Fix the following build errors: drivers/tty/serial/8250_early.c:160: error: 'BASE_BAUD' undeclared (first use in this function): 1 errors in 1 logs drivers/tty/serial/8250_early.c:37:24: error: asm/serial.h: No such file or directory: 1 errors in 1 logs I am not sure if (1843200 / 16) is suitable for cris, but most other arch's define it as this value. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:35 UTC
37b7bf6 Axel Lin 25 August 2011, 22:59:20 UTC drivers/misc/ab8500-pwm.c: fix modalias Since 43cc71eed12 ("platform: prefix MODALIAS with "platform:""), the platform modalias is prefixed with "platform:". This patch changes the MODULE_ALIAS to "platform:ab8500-pwm". Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Arun Murthy <arun.murthy@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:35 UTC
b89d5f1 Axel Lin 25 August 2011, 22:59:19 UTC drivers/misc/fsa9480.c: fix a leak of the IRQ during init failure Make sure we are passing the same cookie in all calls to request_threaded_irq() and free_irq(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Donggeun Kim <dg77.kim@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:35 UTC
c53252b Axel Lin 25 August 2011, 22:59:18 UTC backlight: fix module alias prefix for adp8870_bl This is an i2c driver, not a platform driver, thus use "i2c" prefix for the module alias. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:34 UTC
cc7993f Dilan Lee 25 August 2011, 22:59:17 UTC backlight: add a callback 'notify_after' for backlight control We need a callback to do some things after pwm_enable, pwm_disable and pwm_config. Signed-off-by: Dilan Lee <dilee@nvidia.com> Reviewed-by: Robert Morell <rmorell@nvidia.com> Reviewed-by: Arun Murthy <arun.murthy@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:34 UTC
23751be Johannes Weiner 25 August 2011, 22:59:16 UTC memcg: fix hierarchical oom locking Commit 79dfdaccd1d5 ("memcg: make oom_lock 0 and 1 based rather than counter") tried to oom lock the hierarchy and roll back upon encountering an already locked memcg. The code is confused when it comes to detecting a locked memcg, though, so it would fail and rollback after locking one memcg and encountering an unlocked second one. The result is that oom-locking hierarchies fails unconditionally and that every oom killer invocation simply goes to sleep on the oom waitqueue forever. The tasks practically hang forever without anyone intervening, possibly holding locks that trip up unrelated tasks, too. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:34 UTC
86383b5 Axel Lin 25 August 2011, 22:59:15 UTC leds: add missing include of linux/module.h Add missing include of linux/module.h for drivers that use interfaces from linux/module.h. This patch fixes build errors. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Jonathan McDowell <noodles@earth.li> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Cc: Magnus Damm <damm@opensource.se> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:34 UTC
15b1a8f Axel Lin 25 August 2011, 22:59:14 UTC drivers/video/backlight/ep93xx_bl.c: add missing include of linux/module.h ep93xx_bl.c uses interfaces from linux/module.h, so it should include that file. This patch fixes build errors: CC [M] drivers/video/backlight/ep93xx_bl.o drivers/video/backlight/ep93xx_bl.c:138: error: 'THIS_MODULE' undeclared here (not in a function) drivers/video/backlight/ep93xx_bl.c:158: error: expected declaration specifiers or '...' before string constant drivers/video/backlight/ep93xx_bl.c:158: warning: data definition has no type or storage class ... Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:34 UTC
284fb68 Alexandre Bounine 25 August 2011, 22:59:13 UTC rapidio: fix use of non-compatible registers Replace/remove use of RIO v.1.2 registers/bits that are not forward-compatible with newer versions of RapidIO specification. RapidIO specification v.1.3 removed Write Port CSR, Doorbell CSR, Mailbox CSR and Mailbox and Doorbell bits of the PEF CAR. Use of removed (since RIO v.1.3) register bits affects users of currently available 1.3 and 2.x compliant devices who may use not so recent kernel versions. Removing checks for unsupported bits makes corresponding routines compatible with all versions of RapidIO specification. Therefore, backporting makes stable kernel versions compliant with RIO v.1.3 and later as well. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Chul Kim <chul.kim@idt.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:34 UTC
439423f Shaohua Li 25 August 2011, 22:59:12 UTC vmscan: clear ZONE_CONGESTED for zone with good watermark ZONE_CONGESTED is only cleared in kswapd, but pages can be freed in any task. It's possible ZONE_CONGESTED isn't cleared in some cases: 1. the zone is already balanced just entering balance_pgdat() for order-0 because concurrent tasks free memory. In this case, later check will skip the zone as it's balanced so the flag isn't cleared. 2. high order balance fallbacks to order-0. quote from Mel: At the end of balance_pgdat(), kswapd uses the following logic; If reclaiming at high order { for each zone { if all_unreclaimable skip if watermark is not met order = 0 loop again /* watermark is met */ clear congested } } i.e. it clears ZONE_CONGESTED if it the zone is balanced. if not, it restarts balancing at order-0. However, if the higher zones are balanced for order-0, kswapd will miss clearing ZONE_CONGESTED as that only happens after a zone is shrunk. This can mean that wait_iff_congested() stalls unnecessarily. This patch makes kswapd clear ZONE_CONGESTED during its initial highmem->dma scan for zones that are already balanced. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:34 UTC
4c30c6f Nishanth Aravamudan 25 August 2011, 22:59:11 UTC kernel/printk: do not turn off bootconsole in printk_late_init() if keep_bootcon It seems that 7bf693951a8e ("console: allow to retain boot console via boot option keep_bootcon") doesn't always achieve what it aims, as when printk_late_init() runs it unconditionally turns off all boot consoles. With this patch, I am able to see more messages on the boot console in KVM guests than I can without, when keep_bootcon is specified. I think it is appropriate for the relevant -stable trees. However, it's more of an annoyance than a serious bug (ideally you don't need to keep the boot console around as console handover should be working -- I was encountering a situation where the console handover wasn't working and not having the boot console available meant I couldn't see why). Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Greg KH <gregkh@suse.de> Acked-by: Fabio M. Di Nitto <fdinitto@redhat.com> Cc: <stable@kernel.org> [2.6.39.x, 3.0.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:34 UTC
4733123 Wanlong Gao 25 August 2011, 22:59:10 UTC MAINTAINERS: Paul Menage has moved Paul said: I left Google at the end of last week - if it's not bouncing already, menage@google.com isn't going to work for much longer. Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: Paul Menage <paul@paulmenage.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:34 UTC
f51bdd2 Shaohua Li 25 August 2011, 22:59:10 UTC mm: fix a vmscan warning I get the below warning: BUG: using smp_processor_id() in preemptible [00000000] code: bash/746 caller is native_sched_clock+0x37/0x6e Pid: 746, comm: bash Tainted: G W 3.0.0+ #254 Call Trace: [<ffffffff813435c6>] debug_smp_processor_id+0xc2/0xdc [<ffffffff8104158d>] native_sched_clock+0x37/0x6e [<ffffffff81116219>] try_to_free_mem_cgroup_pages+0x7d/0x270 [<ffffffff8114f1f8>] mem_cgroup_force_empty+0x24b/0x27a [<ffffffff8114ff21>] ? sys_close+0x38/0x138 [<ffffffff8114ff21>] ? sys_close+0x38/0x138 [<ffffffff8114f257>] mem_cgroup_force_empty_write+0x17/0x19 [<ffffffff810c72fb>] cgroup_file_write+0xa8/0xba [<ffffffff811522d2>] vfs_write+0xb3/0x138 [<ffffffff8115241a>] sys_write+0x4a/0x71 [<ffffffff8114ffd9>] ? sys_close+0xf0/0x138 [<ffffffff8176deab>] system_call_fastpath+0x16/0x1b sched_clock() can't be used with preempt enabled. And we don't need fast approach to get clock here, so let's use ktime API. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Tested-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:34 UTC
7e8aa04 Thomas Meyer 25 August 2011, 22:59:09 UTC drivers/char/msm_smd_pkt.c: don't use IS_ERR() The various basic memory allocation function return NULL, not an ERR_PTR. The semantic patch that makes this change is available in scripts/coccinelle/null/eno.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Cc: Niranjana Vishwanathapura <nvishwan@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:33 UTC
30ecad5 Hui Zhu 25 August 2011, 22:59:08 UTC checkpatch: add missing WARN argument for min_t and max_t tests The test for bad usage of min_t() and max_t() is missing the --ignore type. Add it. Signed-off-by: Hui Zhu <teawater@gmail.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:33 UTC
3d1c2f7 Ralf Thielow 25 August 2011, 22:59:07 UTC scripts/get_maintainer.pl: update Linus's git repository Change to new git tree - (git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git). Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:33 UTC
5af12d0 Johannes Weiner 25 August 2011, 22:59:07 UTC memcg: pin execution to current cpu while draining stock Commit d1a05b6973c7 ("memcg do not try to drain per-cpu caches without pages") added a drain_local_stock() call to a preemptible section. The draining task looks up the cpu-local stock twice to set the draining-flag, then to drain the stock and clear the flag again. If the task is migrated to a different CPU in between, noone will clear the flag on the first stock and it will be forever undrainable. Its charge can not be recovered and the cgroup can not be deleted anymore. Properly pin the task to the executing CPU while draining stocks. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:33 UTC
a801876 Evgeniy Polyakov 25 August 2011, 22:59:06 UTC MAINTAINERS: Evgeniy has moved Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:33 UTC
5829944 Dan Carpenter 25 August 2011, 22:59:04 UTC w1: fix for loop in w1_f29_remove_slave() The for loop was looking for i <= 0 instead of i >= 0 so this function never did anything. Also we started with i = NB_SYSFS_BIN_FILES instead of "NB_SYSFS_BIN_FILES - 1" which is an off by one bug. Reported-by: Bojan Prtvar <prtvar.b@gmail.com> Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jean-Franois Dagenais <dagenaisj@sonatest.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:33 UTC
2df7a7d Sergei Trofimovich 25 August 2011, 22:59:02 UTC alpha: unbreak osf_setsysinfo(SSI_NVPAIRS, [SSIN_UACPROC, UAC_SIGBUS]) The bug was accidentally found by the following program: #include <asm/sysinfo.h> #include <asm/unistd.h> #include <sys/syscall.h> static int setsysinfo(unsigned long op, void *buffer, unsigned long size, int *start, void *arg, unsigned long flag) { return syscall(__NR_osf_setsysinfo, op, buffer, size, start, arg, flag); } int main(int argc, char **argv) { short x[10]; unsigned int buf[2] = { SSIN_UACPROC, UAC_SIGBUS, }; setsysinfo(SSI_NVPAIRS, buf, 1, 0, 0, 0); int *y = (int*) (x+1); *y = 0; return 0; } The program shoud fail on SIGBUS, but didn't. The patch is a second part of userspace flag fix (commit 745dd2405e28 "Alpha: Rearrange thread info flags fixing two regressions"). Deleted outdated out-of-sync 'UAC_SHIFT' (the cause of bug) in favour of 'ALPHA_UAC_SHIFT'. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Acked-by: Michael Cree <mcree@orcon.net.nz> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:33 UTC
06ed462 Sergei Trofimovich 25 August 2011, 22:59:01 UTC drivers/misc/pti.c: add missing includes Found on allmodconfig build (ARCH=alpha) drivers/misc/pti.c: In function 'get_id': drivers/misc/pti.c:249: error: implicit declaration of function 'kmalloc' drivers/misc/pti.c: In function 'pti_char_write': drivers/misc/pti.c:658: error: implicit declaration of function 'copy_from_user' Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: J Freyensee <james_p_freyensee@linux.intel.com> Cc: Jeremy Rocher <rocher.jeremy@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 23:25:33 UTC
b4ca46e Andy Lutomirski 25 August 2011, 20:10:33 UTC x86-32: Fix boot with CONFIG_X86_INVD_BUG entry_32.S contained a hardcoded alternative instruction entry, and the format changed in commit 59e97e4d6fbc ("x86: Make alternative instruction pointers relative"). Replace the hardcoded entry with the altinstruction_entry macro. This fixes the 32-bit boot with CONFIG_X86_INVD_BUG=y. Reported-and-tested-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Andy Lutomirski <luto@mit.edu> Cc: Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 20:27:14 UTC
0de3b48 Thomas Jarosch 25 August 2011, 13:37:45 UTC drm/i915: Fix wrong initializer for "locked" variable in assert_panel_unlocked Otherwise it just contains random memory. Issue detected by cppcheck. Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com> 25 August 2011, 18:21:20 UTC
cbbfa38 Tejun Heo 25 August 2011, 17:46:56 UTC mtrr: fix UP breakage caused during switch to stop_machine While removing custom rendezvous code and switching to stop_machine, commit 192d8857427d ("x86, mtrr: use stop_machine APIs for doing MTRR rendezvous") completely dropped mtrr setting code on !CONFIG_SMP breaking MTRR settting on UP. Fix it by removing the incorrect CONFIG_SMP. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Anders Eriksson <aeriksson@fastmail.fm> Tested-and-acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 18:02:29 UTC
e096d0c Josh Boyer 25 August 2011, 11:48:12 UTC lockdep: Add helper function for dir vs file i_mutex annotation Purely in-memory filesystems do not use the inode hash as the dcache tells us if an entry already exists. As a result, they do not call unlock_new_inode, and thus directory inodes do not get put into a different lockdep class for i_sem. We need the different lockdep classes, because the locking order for i_mutex is different for directory inodes and regular inodes. Directory inodes can do "readdir()", which takes i_mutex *before* possibly taking mm->mmap_sem (due to a page fault while copying the directory entry to user space). In contrast, regular inodes can be mmap'ed, which takes mm->mmap_sem before accessing i_mutex. The two cases can never happen for the same inode, so no real deadlock can occur, but without the different lockdep classes, lockdep cannot understand that. As a result, if CONFIG_DEBUG_LOCK_ALLOC is set, this can lead to false positives from lockdep like below: find/645 is trying to acquire lock: (&mm->mmap_sem){++++++}, at: [<ffffffff81109514>] might_fault+0x5c/0xac but task is already holding lock: (&sb->s_type->i_mutex_key#15){+.+.+.}, at: [<ffffffff81149f34>] vfs_readdir+0x5b/0xb4 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&sb->s_type->i_mutex_key#15){+.+.+.}: [<ffffffff8108ac26>] lock_acquire+0xbf/0x103 [<ffffffff814db822>] __mutex_lock_common+0x4c/0x361 [<ffffffff814dbc46>] mutex_lock_nested+0x40/0x45 [<ffffffff811daa87>] hugetlbfs_file_mmap+0x82/0x110 [<ffffffff81111557>] mmap_region+0x258/0x432 [<ffffffff811119dd>] do_mmap_pgoff+0x2ac/0x306 [<ffffffff81111b4f>] sys_mmap_pgoff+0x118/0x16a [<ffffffff8100c858>] sys_mmap+0x22/0x24 [<ffffffff814e3ec2>] system_call_fastpath+0x16/0x1b -> #0 (&mm->mmap_sem){++++++}: [<ffffffff8108a4bc>] __lock_acquire+0xa1a/0xcf7 [<ffffffff8108ac26>] lock_acquire+0xbf/0x103 [<ffffffff81109541>] might_fault+0x89/0xac [<ffffffff81149cff>] filldir+0x6f/0xc7 [<ffffffff811586ea>] dcache_readdir+0x67/0x205 [<ffffffff81149f54>] vfs_readdir+0x7b/0xb4 [<ffffffff8114a073>] sys_getdents+0x7e/0xd1 [<ffffffff814e3ec2>] system_call_fastpath+0x16/0x1b This patch moves the directory vs file lockdep annotation into a helper function that can be called by in-memory filesystems and has hugetlbfs call it. Signed-off-by: Josh Boyer <jwboyer@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 17:50:18 UTC
e33f2d2 Linus Torvalds 25 August 2011, 17:40:12 UTC Merge branch 'urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/writeback * 'urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/writeback: squeeze max-pause area and drop pass-good area 25 August 2011, 17:40:12 UTC
be5378f Linus Torvalds 25 August 2011, 17:32:18 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/cpupowerutils * git://git.kernel.org/pub/scm/linux/kernel/git/brodo/cpupowerutils: cpupower: use man(1) when calling "cpupower help subcommand" cpupower: make NLS truly optional cpupower: fix Makefile typo cpupower: Make monitor command -c/--cpu aware cpupower: Better detect offlined CPUs cpupower: Do not show an empty Idle_Stats monitor if no idle driver is available cpupower: mperf monitor - Use TSC to calculate max frequency if possible cpupower: avoid using symlinks 25 August 2011, 17:32:18 UTC
e5b1d9c Linus Torvalds 25 August 2011, 17:31:40 UTC Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (i5k_amb) Drop i5k_channel_pci_id hwmon: (ntc_thermistor) Simplify if sequence 25 August 2011, 17:31:40 UTC
f385b69 Linus Torvalds 25 August 2011, 17:30:51 UTC Merge branch '3.1-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending * '3.1-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (21 commits) target: Convert acl_node_lock to be IRQ-disabling target: Make locking in transport_deregister_session() IRQ safe tcm_fc: init/exit functions should not be protected by "#ifdef MODULE" target: Print subpage too for unhandled MODE SENSE pages iscsi-target: Fix iscsit_allocate_se_cmd_for_tmr failure path bugs iscsi-target: Implement iSCSI target IPv6 address printing. target: Fix task SGL chaining breakage with transport_allocate_data_tasks target: Fix task count > 1 handling breakage and use max_sector page alignment target: Add missing DATA_SG_IO transport_cmd_get_valid_sectors check target: Fix SYNCHRONIZE_CACHE zero LBA + range breakage target: Remove duplicate task completions in transport_emulate_control_cdb target: Fix WRITE_SAME usage with transport_get_size target: Add WRITE_SAME (10) parsing and refactor passthrough checks target: Fix write payload exception handling with ->new_cmd_map iscsi-target: forever loop bug in iscsit_attach_ooo_cmdsn() iscsi-target: remove duplicate return target: Convert target_core_rd.c to use use BUG_ON iscsi-target: Fix leak on failure in iscsi_copy_param_list() target: Use ERR_CAST inlined function target: Make standard INQUIRY return 'not connected' for tpg_virt_lun0 ... 25 August 2011, 17:30:51 UTC
be27425 Andi Kleen 19 August 2011, 23:15:10 UTC Add a personality to report 2.6.x version numbers I ran into a couple of programs which broke with the new Linux 3.0 version. Some of those were binary only. I tried to use LD_PRELOAD to work around it, but it was quite difficult and in one case impossible because of a mix of 32bit and 64bit executables. For example, all kind of management software from HP doesnt work, unless we pretend to run a 2.6 kernel. $ uname -a Linux svivoipvnx001 3.0.0-08107-g97cd98f #1062 SMP Fri Aug 12 18:11:45 CEST 2011 i686 i686 i386 GNU/Linux $ hpacucli ctrl all show Error: No controllers detected. $ rpm -qf /usr/sbin/hpacucli hpacucli-8.75-12.0 Another notable case is that Python now reports "linux3" from sys.platform(); which in turn can break things that were checking sys.platform() == "linux2": https://bugzilla.mozilla.org/show_bug.cgi?id=664564 It seems pretty clear to me though it's a bug in the apps that are using '==' instead of .startswith(), but this allows us to unbreak broken programs. This patch adds a UNAME26 personality that makes the kernel report a 2.6.40+x version number instead. The x is the x in 3.x. I know this is somewhat ugly, but I didn't find a better workaround, and compatibility to existing programs is important. Some programs also read /proc/sys/kernel/osrelease. This can be worked around in user space with mount --bind (and a mount namespace) To use: wget ftp://ftp.kernel.org/pub/linux/kernel/people/ak/uname26/uname26.c gcc -o uname26 uname26.c ./uname26 program Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 August 2011, 17:17:28 UTC
c96fbdd Jean-Christophe PLAGNIOL-VILLARD 25 August 2011, 09:46:58 UTC USB: ftdi_sio: add Calao reference board support Calao use on there dev kits a FT2232 where the port 0 is used for the JTAG and port 1 for the UART They use the same VID and PID as FTDI Chip but they program the manufacturer name in the eeprom So use this information to detect it Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Gregory Hermant <gregory.hermant@calao-systems.com> Cc: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 25 August 2011, 16:44:50 UTC
back to top