Skip to main content

Browse the archive

https://github.com/torvalds/linux
27 March 2024, 02:37:15 UTC
sort by:
Revision Author Date Message Commit Date
e7b96f2 Tim Gardner 09 July 2010, 20:48:50 UTC agp/intel: Use the correct mask to detect i830 aperture size. BugLink: https://bugs.launchpad.net/bugs/597075 commit f1befe71fa7a79ab733011b045639d8d809924ad introduced a regression when detecting aperture size of some i915 adapters, e.g., those on the Intel Q35 chipset. The original report: https://bugzilla.kernel.org/show_bug.cgi?id=15733 The regression report: https://bugzilla.kernel.org/show_bug.cgi?id=16294 According to the specification found at http://intellinuxgraphics.org/VOL_1_graphics_core.pdf, the PCI config space register I830_GMCH_CTRL is a mirror of GMCH Graphics Control. The correct macro for isolating the aperture size bits is therefore I830_GMCH_GMS_MASK along with the attendant changes to the case statement. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Tested-by: Kees Cook <kees.cook@canonical.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Eric Anholt <eric@anholt.net> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> 26 July 2010, 18:27:07 UTC
9c928d1 Jesse Barnes 23 July 2010, 22:20:00 UTC drm/i915: disable FBC when more than one pipe is active We're really supposed to do this to avoid trouble with underflows when multiple planes are active. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=26987. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: fangxun <xunx.fang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net> 26 July 2010, 18:27:06 UTC
127bd2a Chris Wilson 23 July 2010, 22:32:05 UTC drm/i915: Use the correct scanout alignment for fbcon. This fixes a potential modesetting error during boot with plymouth on Broadwater and Crestline introduced with 9df47c. The framebuffer was hard-coding an alignment of 64K, but the modesetting code required the documented alignment of 128K. The result was that we would attempt to unbind the pinned fbcon buffer, triggering an ERROR and ultimately failing the mode change. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> 26 July 2010, 18:27:05 UTC
9934c13 Jesse Barnes 22 July 2010, 20:18:19 UTC drm/i915: make sure eDP panel is turned on When enabling the eDP port, we need to make sure the panel is turned on after training the link. If we don't, it likely won't come back after suspend or may not come up at all. For unknown reasons, unlocking the panel regs before initiating a power on sequence is necessary. There are known bugs in the PCH panel sequencing logic, apparently this is one possible workaround. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28739. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: "Paulo J. S. Silva" <pjssilva@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> 26 July 2010, 18:27:04 UTC
4a655f0 Jesse Barnes 22 July 2010, 20:18:18 UTC drm/i915: add PANEL_UNLOCK_REGS definition In some cases, unlocking the panel regs is safe and can help us avoid a flickery, full mode set sequence. So define the unlock key and use it. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> 26 July 2010, 18:27:03 UTC
6ba770d Adam Jackson 02 July 2010, 20:43:30 UTC drm/i915: Make G4X-style PLL search more permissive Fixes an Ironlake laptop with a 68.940MHz 1280x800 panel and 120MHz SSC reference clock. More generally, the 0.488% tolerance used before is just too tight to reliably find a PLL setting. I extracted the search algorithm and modified it to find the dot clocks with maximum error over the valid range for the given output type: http://people.freedesktop.org/~ajax/intel_g4x_find_best_pll.c This gave: Worst dotclock for Ironlake DAC refclk is 350000kHz (error 0.00571) Worst dotclock for Ironlake SL-LVDS refclk is 102321kHz (error 0.00524) Worst dotclock for Ironlake DL-LVDS refclk is 219642kHz (error 0.00488) Worst dotclock for Ironlake SL-LVDS SSC refclk is 84374kHz (error 0.00529) Worst dotclock for Ironlake DL-LVDS SSC refclk is 183035kHz (error 0.00488) Worst dotclock for G4X SDVO refclk is 267600kHz (error 0.00448) Worst dotclock for G4X HDMI refclk is 334400kHz (error 0.00478) Worst dotclock for G4X SL-LVDS refclk is 95571kHz (error 0.00449) Worst dotclock for G4X DL-LVDS refclk is 224000kHz (error 0.00510) Signed-off-by: Adam Jackson <ajax@redhat.com> Cc: stable@kernel.org Signed-off-by: Eric Anholt <eric@anholt.net> 26 July 2010, 18:27:02 UTC
8faf2e6 Ben Hutchings 13 June 2010, 21:22:59 UTC MIPS: Set io_map_base for several PCI bridges lacking it Several MIPS platforms don't set pci_controller::io_map_base for their PCI bridges. This results in a panic in pci_iomap(). (The panic is conditional on CONFIG_PCI_DOMAINS, but that is now enabled for all PCI MIPS systems.) Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: linux-mips@linux-mips.org Cc: Martin Michlmayr <tbm@cyrius.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: 584784@bugs.debian.org Patchwork: https://patchwork.linux-mips.org/patch/1377/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 26 July 2010, 18:08:19 UTC
0d5977d Wolfgang Grandegger 17 July 2010, 14:38:48 UTC MIPS: Alchemy: Define eth platform devices in the correct order Currently, the eth devices are probed in the inverse order, first au1xxx_eth1_device and then au1xxx_eth0_device. On the GPR board, this makes trouble: # ifconfig|grep HWaddr eth0 Link encap:Ethernet HWaddr 00:50:C2:0C:30:01 eth1 Link encap:Ethernet HWaddr 66:22:01:80:38:10 A bogous ethernet hwaddr is assigned to the first device and au1xxx_eth0_device is mapped to eth1, which even does not work properly. With this patch, the problems are gone: # ifconfig|grep HWaddr eth0 Link encap:Ethernet HWaddr 66:22:11:32:38:10 eth1 Link encap:Ethernet HWaddr 66:22:11:32:38:11 Signed-off-by: Wolfgang Grandegger <wg@denx.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1473/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 26 July 2010, 18:08:19 UTC
7f13f65 Florian Fainelli 21 July 2010, 20:59:26 UTC MIPS: BCM63xx: Prevent second enet registration on BCM6338 This SoC has only one ethernet MAC, so prevent registration of a second one. Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1482/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 26 July 2010, 18:08:18 UTC
f2a6827 David Daney 22 July 2010, 18:59:27 UTC MIPS: Quit using undefined behavior of ADDU in 64-bit atomic operations. For 64-bit, we must use DADDU and DSUBU. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1483/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 26 July 2010, 18:08:18 UTC
31c984a Ralf Baechle 22 July 2010, 01:20:25 UTC MIPS: N32: Define getdents64. As a relativly new ABI N32 should only have received the getdents64(2) but instead it only had getdents(2). This was noticed as a performance anomaly in glibc. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 26 July 2010, 18:08:17 UTC
98a0f86 Bruno Randolf 11 July 2010, 15:40:28 UTC MIPS: MTX-1: Fix PCI on the MeshCube and related boards This patch fixes a regression introduced by commit "MIPS: Alchemy: MTX-1: Use linux gpio api." (bb706b28bbd647c2fd7f22d6bf03a18b9552be05) which broke PCI bus operation. The problem is caused by alchemy_gpio2_enable() which resets the GPIO2 block. Two PCI signals (PCI_SERR and PCI_RST) are connected to GPIO2 and they obviously do not to like the reset. Since GPIO2 is correctly initialized by the boot monitor (YAMON) it is not necessary to call this function, so just remove it. Also replace gpio_set_value() with alchemy_gpio_set_value() to avoid problems in case gpiolib gets initialized after PCI. And since alchemy gpio_set_value() calls au_sync() we don't have to au_sync() again later. Signed-off-by: Bruno Randolf <br1@einfach.org> To: linux-mips@linux-mips.org To: manuel.lauss@googlemail.com Patchwork: https://patchwork.linux-mips.org/patch/1448/ Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 26 July 2010, 18:08:17 UTC
1ed8453 David Daney 16 June 2010, 22:00:28 UTC MIPS: Make init_vdso a subsys_initcall. Quoting from Jiri Slaby's patch of a similar nature for x86: When initrd is in use and a driver does request_module() in its module_init (i.e. __initcall or device_initcall), a modprobe process is created with VDSO mapping. But VDSO is inited even in __initcall, i.e. on the same level (at the same time), so it may not be inited yet (link order matters). Move init_vdso up to subsys_initcall to avoid the issue. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: David Daney <ddaney@caviumnetworks.com> Cc: Jiri Slaby <jslaby@suse.cz> Patchwork: http://patchwork.linux-mips.org/patch/1386/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 26 July 2010, 18:08:16 UTC
57d1501 David Daney 16 June 2010, 22:00:27 UTC MIPS: "Fix" useless 'init_vdso successfully' message. In addition to being useless, it was mis-spelled. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: David Daney <ddaney@caviumnetworks.com> Patchwork: http://patchwork.linux-mips.org/patch/1385/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 26 July 2010, 18:08:16 UTC
28d7d21 David VomLehn 18 June 2010, 23:51:49 UTC MIPS: PowerTV: Move register setup to before reading registers. The 4600 family code reads registers to differentiate between two ASIC variants, but this was being done prior to the register setup. This moves register setup before the reading code. Signed-off-by: David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1392/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 26 July 2010, 18:08:16 UTC
9387160 Ralf Baechle 26 July 2010, 18:08:15 UTC SOUND: Au1000: Fix section mismatch WARNING: sound/soc/au1x/snd-soc-au1xpsc-i2s.o(.data+0xa8): Section mismatch in reference from the variable au1xpsc_i2s_driver to the function .init.text:au1xpsc_i2s_drvprobe() The variable au1xpsc_i2s_driver references the function __init au1xpsc_i2s_drvprobe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 26 July 2010, 18:08:15 UTC
362992b Ralf Baechle 26 July 2010, 18:08:15 UTC VIDEO: Au1100fb: Fix section mismatch WARNING: drivers/video/built-in.o(.data+0x360): Section mismatch in reference from the variable au1100fb_driver to the function .init.text:au1100fb_drv_probe() The variable au1100fb_driver references the function __init au1100fb_drv_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fixing which triggers of a slew of further mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function au1100fb_drv_probe() to the variable .init.data:au1100fb_fix The function __devinit au1100fb_drv_probe() references a variable __initdata au1100fb_fix. If au1100fb_fix is only used by au1100fb_drv_probe then annotate au1100fb_fix with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x21c): Section mismatch in reference from the function au1100fb_drv_probe() to the variable .init.data:au1100fb_var The function __devinit au1100fb_drv_probe() references a variable __initdata au1100fb_var. If au1100fb_var is only used by au1100fb_drv_probe then annotate au1100fb_var with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 26 July 2010, 18:08:15 UTC
5b1638d Ralf Baechle 26 July 2010, 18:08:15 UTC VIDEO: PMAGB-B: Fix section mismatch WARNING: drivers/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_fix The function __devinit pmagbafb_probe() references a variable __initdata pmagbafb_fix. If pmagbafb_fix is only used by pmagbafb_probe then annotate pmagbafb_fix with a matching annotation. Fixing this one triggers a few more mismatches in order: WARNING: drivers/video/built-in.o(.devinit.text+0x414): Section mismatch in reference from the function pmagbbfb_probe() to the variable .init.data:pmagbbfb_fix The function __devinit pmagbbfb_probe() references a variable __initdata pmagbbfb_fix. If pmagbbfb_fix is only used by pmagbbfb_probe then annotate pmagbbfb_fix with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x45c): Section mismatch in reference from the function pmagbbfb_probe() to the variable .init.data:pmagbbfb_defined The function __devinit pmagbbfb_probe() references a variable __initdata pmagbbfb_defined. If pmagbbfb_defined is only used by pmagbbfb_probe then annotate pmagbbfb_defined with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x5fc): Section mismatch in reference from the function pmagbbfb_probe() to the function .init.text:pmagbbfb_screen_setup() The function __devinit pmagbbfb_probe() references a function __init pmagbbfb_screen_setup(). If pmagbbfb_screen_setup is only used by pmagbbfb_probe then annotate pmagbbfb_screen_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x6f4): Section mismatch in reference from the function pmagbbfb_probe() to the function .init.text:pmagbbfb_osc_setup() The function __devinit pmagbbfb_probe() references a function __init pmagbbfb_osc_setup(). If pmagbbfb_osc_setup is only used by pmagbbfb_probe then annotate pmagbbfb_osc_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x5f8): Section mismatch in reference from the function pmagbbfb_osc_setup() to the variable .init.data:pmagbbfb_freqs.15993 The function __devinit pmagbbfb_osc_setup() references a variable __initdata pmagbbfb_freqs.15993. If pmagbbfb_freqs.15993 is only used by pmagbbfb_osc_setup then annotate pmagbbfb_freqs.15993 with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 26 July 2010, 18:08:15 UTC
9625b51 Ralf Baechle 26 July 2010, 18:08:14 UTC VIDEO: PMAG-BA: Fix section mismatch WARNING: drivers/video/built-in.o(.data+0x1e0): Section mismatch in reference fr om the variable pmagbafb_driver to the function .init.text:pmagbafb_probe() The variable pmagbafb_driver references the function __init pmagbafb_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fixing this one triggers 2 more: WARNING: drivers/video/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_fix The function __devinit pmagbafb_probe() references a variable __initdata pmagbafb_fix. If pmagbafb_fix is only used by pmagbafb_probe then annotate pmagbafb_fix with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x108): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_defined The function __devinit pmagbafb_probe() references a variable __initdata pmagbafb_defined. If pmagbafb_defined is only used by pmagbafb_probe then annotate pmagbafb_defined with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 26 July 2010, 18:08:14 UTC
3852cc3 Ralf Baechle 26 July 2010, 18:08:14 UTC NET: declance: Fix section mismatches WARNING: drivers/net/built-in.o(.data+0x24): Section mismatch in reference from the variable dec_lance_tc_driver to the function .init.text:dec_lance_tc_probe() The variable dec_lance_tc_driver references the function __init dec_lance_tc_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fixing this one results in a new mismatch: WARNING: drivers/net/built-in.o(.devinit.text+0x14): Section mismatch in reference from the function dec_lance_tc_probe() to the function .init.text:dec_lance_probe() The function __devinit dec_lance_tc_probe() references a function __init dec_lance_probe(). If dec_lance_probe is only used by dec_lance_tc_probe then annotate dec_lance_probe with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 26 July 2010, 18:08:14 UTC
18f9f11 Ralf Baechle 26 July 2010, 18:08:13 UTC VIDEO. gbefb: Fix section mismatches. WARNING: drivers/video/built-in.o(.devinit.text+0x54): Section mismatch in reference from the function gbefb_probe() to the function .init.text:gbefb_setup() The function __devinit gbefb_probe() references a function __init gbefb_setup(). If gbefb_setup is only used by gbefb_probe then annotate gbefb_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x208): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:mode_option The function __devinit gbefb_probe() references a variable __initdata mode_option. If mode_option is only used by gbefb_probe then annotate mode_option with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x214): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_mode The function __devinit gbefb_probe() references a variable __initdata default_mode. If default_mode is only used by gbefb_probe then annotate default_mode with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x23c): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_var The function __devinit gbefb_probe() references a variable __initdata default_var. If default_var is only used by gbefb_probe then annotate default_var with a matching annotation. Fixing these results in more mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0x3c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_LCD The function __devinit gbefb_setup() references a variable __initdata default_var_LCD. If default_var_LCD is only used by gbefb_setup then annotate default_var_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x14c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_LCD The function __devinit gbefb_setup() references a variable __initdata default_mode_LCD. If default_mode_LCD is only used by gbefb_setup then annotate default_mode_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x150): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_CRT The function __devinit gbefb_setup() references a variable __initdata default_var_CRT. If default_var_CRT is only used by gbefb_setup then annotate default_var_CRT with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x154): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_CRT The function __devinit gbefb_setup() references a variable __initdata default_mode_CRT. If default_mode_CRT is only used by gbefb_setup then annotate default_mode_CRT with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 26 July 2010, 18:08:13 UTC
a392a10 Chris Wilson 25 July 2010, 22:09:13 UTC drm/i915: Clear any existing dither mode prior to enabling spatial dithering We cannot the initial configuration set by the BIOS not to have a dither mode enabled which conflicts with our enabling the Spatial Temporal 1 dither mode for PCH. In particular, the BIOS may either enable temporal dithering or the Spatial Temporal 2 with the result that we enable pure temporal dithering. Temporal dithering looks bad and is perceived as a flicker. Fixes: Bug 29248 - [Arrandale] Annoying flicker on internal panel, goes away after suspend to RAM https://bugs.freedesktop.org/show_bug.cgi?id=29248 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> 26 July 2010, 17:46:07 UTC
be9a3db Jesse Barnes 23 July 2010, 19:03:37 UTC drm/i915: handle shared framebuffers when flipping If a framebuffer is shared across CRTCs, the x,y position of one of them is likely to be something other than the origin (e.g. for extended desktop configs). So calculate the offset at flip time so such configurations can work. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28518. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Thomas M. <tmezzadra@gmail.com> Tested-by: fangxun <xunx.fang@intel.com> Cc: stable@kernel.org Signed-off-by: Eric Anholt <eric@anholt.net> 26 July 2010, 17:45:55 UTC
6aa033d Linus Torvalds 26 July 2010, 15:20:38 UTC Merge master.kernel.org:/home/rmk/linux-2.6-arm * master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6265/1: kirkwood: move qnap_tsx1x_register_flash() to .init.text ARM: 6263/1: ns9xxx: fix FTBFS for zImage ARM: 6262/1: arm/clps711x: fix debug macro compilation failure ARM: 6261/1: arm/shark: fix debug macro compilation failure ARM: 6260/1: arm/plat-spear: fix debug macro compilation failure ARM: 6259/1: arm/ns9xxx: fix debug macro compilation failure ARM: 6258/1: arm/h720x: fix debug macro compilation failure ARM: 6233/1: Delete a wrong redundant right parenthesis ARM: 6230/1: fix nuc900 touchscreen clk definition bug [ARM] pxa: fix incorrect CONFIG_CPU_PXA27x to CONFIG_PXA27x [ARM] pxa/colibri-pxa300: fix AC97 init [ARM] pxa: fix incorrect order of AC97 reset pin configs [ARM] pxa: fix frequency scaling for pcmcia/pxa2xx_base [ARM] pxa: cpufreq-pxa2xx: fix DRI recomputation routine [ARM] pxa/corgi: fix MMC/SD card detection failure 26 July 2010, 15:20:38 UTC
58b164b Linus Torvalds 26 July 2010, 15:20:16 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: tpm_tis: fix subsequent suspend failures 26 July 2010, 15:20:16 UTC
20ba5ef Linus Torvalds 26 July 2010, 15:18:18 UTC Merge branch 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm * 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Use kmalloc() instead of vmalloc() for KVM_[GS]ET_MSR KVM: MMU: fix conflict access permissions in direct sp 26 July 2010, 15:18:18 UTC
ab08937 Daniel J Blueman 23 July 2010, 22:16:52 UTC quiesce EDAC initialisation on desktop/mobile i7 Don't print failure to detect Core i7 EDAC facilities to the console at boot time, most often occurring on Core i7 desktops and laptops. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 July 2010, 15:17:44 UTC
dbbe464 Linus Torvalds 26 July 2010, 15:10:00 UTC Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI / Sleep: Allow the NVS saving to be skipped during suspend to RAM ACPI: create "processor.bm_check_disable" boot param ACPI: skip checking BM_STS if the BIOS doesn't ask for it ACPI: fix unused function warning ACPI: processor: fix processor_physically_present on UP ACPI video: fix string mismatch for Sony SR290 laptop ACPI battery: don't invoke power_supply_changed twice when battery is hot-added ACPI: handle systems which asynchoronously enable ACPI mode 26 July 2010, 15:10:00 UTC
24b1442 Eric W. Biederman 25 July 2010, 05:43:35 UTC Driver-core: Always create class directories for classses that support namespaces. This fixes the regression in 2.6.35-rcX where bluetooth network devices would fail to be deleted from sysfs, causing their destruction and recreation to fail. In addition this fixes the mac80211_hwsim driver where it would leave around sysfs files when the driver was removed. This problem is discussed at https://bugzilla.kernel.org/show_bug.cgi?id=16257 The reason for the regression is that the network namespace support added to sysfs expects and requires that network devices be put in directories that can contain only network devices. Today get_device_parent almost provides that guarantee for all class devices, except for a specific exception when the parent of a class devices is a class device. It would be nice to simply remove that arguably incorrect special case, but apparently the input devices depend on it being there. So I have only removed it for class devices with network namespace support. Which today are the network devices. It has been suggested that a better fix would be to change the parent device from a class device to a bus device, which in the case of the bluetooth driver would change /sys/class/bluetooth to /sys/bus/bluetoth, I can not see how we would avoid significant userspace breakage if we were to make that change. Adding an extra directory in the path to the device will also be userspace visible but it is much less likely to break things. Everything is still accessible from /sys/class (for example), and it fixes two bugs. Adding an extra directory fixes a 3 year old regression introduced with the new sysfs layout that makes it impossible to rename bnep0 network devices to names that conflict with hci device attributes like hci_revsion. Adding an additional directory removes the new failure modes introduced by the network namespace code. If it weren't for the regession in the renaming of network devices I would figure out how to just make the sysfs code deal with this configuration of devices. In summary this patch fixes regressions by changing: "/sys/class/bluetooth/hci0/bnep0" to "/sys/class/bluetooth/hci0/net/bnep0". Reported-by: Johannes Berg <johannes@sipsolutions.net> Reported-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 July 2010, 15:05:31 UTC
1fe9b6f Michael S. Tsirkin 26 July 2010, 07:25:30 UTC virtio: fix oops on OOM virtio ring was changed to return an error code on OOM, but one caller was missed and still checks for vq->vring.num. The fix is just to check for <0 error code. Long term it might make sense to change goto add_head to just return an error on oom instead, but let's apply a minimal fix for 2.6.35. Reported-by: Chris Mason <chris.mason@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Tested-by: Chris Mason <chris.mason@oracle.com> Cc: stable@kernel.org # .34.x Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 July 2010, 15:05:31 UTC
2e65a20 Dmitry Torokhov 26 July 2010, 08:12:37 UTC Input: RX51 keymap - fix recent compile breakage Commit 3fea60261e73 ("Input: twl40300-keypad - fix handling of "all ground" rows") broke compilation as I managed to use non-existent keycodes. Reported-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 July 2010, 15:05:31 UTC
4609a17 Russell King 26 July 2010, 11:18:16 UTC ARM: Fix csum_partial_copy_from_user() Using the parent functions frame pointer to access our arguments is completely wrong, whether or not we're building with frame pointers or not. What we should be using is the stack pointer to get at the word above the registers we stacked ourselves. Reported-by: Bosko Radivojevic <bosko.radivojevic@gmail.com> Tested-by: Bosko Radivojevic <bosko.radivojevic@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 26 July 2010, 11:18:16 UTC
f9578fc Uwe Kleine-König 24 July 2010, 08:53:20 UTC ARM: 6265/1: kirkwood: move qnap_tsx1x_register_flash() to .init.text qnap_tsx1x_register_flash is only called by qnap_ts219_init and qnap_ts41x_init which both live in .init.text, too. So the move is OK. This fixes the following warning in kirkwood_defconfig: WARNING: vmlinux.o(.text+0x9334): Section mismatch in reference from the function qnap_tsx1x_register_flash() to the variable .init.data:qnap_tsx1x_spi_slave_info The function qnap_tsx1x_register_flash() references the variable __initdata qnap_tsx1x_spi_slave_info. This is often because qnap_tsx1x_register_flash lacks a __initdata annotation or the annotation of qnap_tsx1x_spi_slave_info is wrong. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 26 July 2010, 09:33:08 UTC
51aa87b Uwe Kleine-König 23 July 2010, 09:46:52 UTC ARM: 6263/1: ns9xxx: fix FTBFS for zImage the different putc variants used an initialized local static variable which is broken since 5de813b (ARM: Eliminate decompressor -Dstatic= PIC hack) This needs to be initialized at runtime and so needs to be global. While at it give it a better name. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 26 July 2010, 09:33:07 UTC
73bcc76 Jeremy Kerr 22 July 2010, 15:34:34 UTC ARM: 6262/1: arm/clps711x: fix debug macro compilation failure We need mach/hardware.h for CLPS7111_VIRT_BASE. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 26 July 2010, 09:33:07 UTC
31e967d Jeremy Kerr 22 July 2010, 15:34:34 UTC ARM: 6261/1: arm/shark: fix debug macro compilation failure We need a waituart macro. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 26 July 2010, 09:33:06 UTC
e6b8b3e Jeremy Kerr 22 July 2010, 15:34:34 UTC ARM: 6260/1: arm/plat-spear: fix debug macro compilation failure mov rx, =<immediate> isn't valid, use #<immediate> instead. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 26 July 2010, 09:33:06 UTC
f63a79f Jeremy Kerr 22 July 2010, 15:34:34 UTC ARM: 6259/1: arm/ns9xxx: fix debug macro compilation failure We need asm/memory.h for NS9XXX_CSxSTAT_PHYS (via mach/memory.h). Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 26 July 2010, 09:33:05 UTC
9729c0c Jeremy Kerr 22 July 2010, 15:34:34 UTC ARM: 6258/1: arm/h720x: fix debug macro compilation failure IO_BASE shoule be IO_VIRT, and IO_START should be IO_PHYS. We also need mach/hardware.h for these definitions. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 26 July 2010, 09:33:05 UTC
c736eef Ben Greear 22 July 2010, 09:54:47 UTC net: dev_forward_skb should call nf_reset With conn-track zones and probably with different network namespaces, the netfilter logic needs to be re-calculated on packet receive. If the netfilter logic is not reset, it will not be recalculated properly. This patch adds the nf_reset logic to dev_forward_skb. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 July 2010, 04:58:46 UTC
59f6fbe Rajiv Andrade 23 June 2010, 19:18:56 UTC tpm_tis: fix subsequent suspend failures Fix subsequent suspends by issuing tpm_continue_selftest during resume. Otherwise, the tpm chip seems to be not fully initialized and will reject the save state command during suspend, thus preventing the whole system to suspend. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16256 Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Cc: James Morris <jmorris@namei.org> Cc: Debora Velarde <debora@linux.vnet.ibm.com> Cc: David Safford <safford@watson.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Morris <jmorris@namei.org> 26 July 2010, 00:25:45 UTC
25848b3 Robert P. J. Day 24 July 2010, 10:41:18 UTC ceph: Correct obvious typo of Kconfig variable "CRYPTO_AES" Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Sage Weil <sage@newdream.net> 25 July 2010, 04:36:07 UTC
3b87956 stephen hemminger 22 July 2010, 18:45:04 UTC net sched: fix race in mirred device removal This fixes hang when target device of mirred packet classifier action is removed. If a mirror or redirection action is configured to cause packets to go to another device, the classifier holds a ref count, but was assuming the adminstrator cleaned up all redirections before removing. The fix is to add a notifier and cleanup during unregister. The new list is implicitly protected by RTNL mutex because it is held during filter add/delete as well as notifier. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net> 25 July 2010, 04:04:20 UTC
76ac21f David S. Miller 25 July 2010, 03:51:45 UTC Merge branch 'wimax-2.6.35.y' of git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax 25 July 2010, 03:51:45 UTC
ef3db4a Michael S. Tsirkin 21 July 2010, 04:32:45 UTC tun: avoid BUG, dump packet on GSO errors There are still some LRO cards that cause GSO errors in tun, and BUG on this is an unfriendly way to tell the admin to disable LRO. Further, experience shows we might have more GSO bugs lurking. See https://bugzilla.kernel.org/show_bug.cgi?id=16413 as a recent example. dumping a packet will make it easier to figure it out. Replace BUG with warning+dump+drop the packet to make GSO errors in tun less critical and easier to debug. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Alex Unigovsky <unik@compot.ru> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> 25 July 2010, 03:47:20 UTC
d8190df Greg Edwards 23 July 2010, 10:02:04 UTC bonding: set device in RLB ARP packet handler After: commit 6146b1a4da98377e4abddc91ba5856bef8f23f1e Author: Jay Vosburgh <fubar@us.ibm.com> Date: Tue Nov 4 17:51:15 2008 -0800 bonding: Fix ALB mode to balance traffic on VLANs the dev field in the RLB ARP packet handler was set to NULL to wildcard and accommodate balancing VLANs on top of bonds. This has the side-effect of the packet handler being called against other, non RLB-enabled bonds, and a kernel oops results when it tries to dereference rx_hashtbl in rlb_update_entry_from_arp(), which won't be set for those bonds, e.g. active-backup. With the __netif_receive_skb() changes from: commit 1f3c8804acba841b5573b953f5560d2683d2db0d Author: Andy Gospodarek <andy@greyhouse.net> Date: Mon Dec 14 10:48:58 2009 +0000 bonding: allow arp_ip_targets on separate vlans to use arp validation frames received on VLANs correctly make their way to the bond's handler, so we no longer need to wildcard the device. The oops can be reproduced by: modprobe bonding echo active-backup > /sys/class/net/bond0/bonding/mode echo 100 > /sys/class/net/bond0/bonding/miimon ifconfig bond0 xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx echo +eth0 > /sys/class/net/bond0/bonding/slaves echo +eth1 > /sys/class/net/bond0/bonding/slaves echo +bond1 > /sys/class/net/bonding_masters echo balance-alb > /sys/class/net/bond1/bonding/mode echo 100 > /sys/class/net/bond1/bonding/miimon ifconfig bond1 xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx echo +eth2 > /sys/class/net/bond1/bonding/slaves echo +eth3 > /sys/class/net/bond1/bonding/slaves Pass some traffic on bond0. Boom. [ Tested, behaves as advertised. I do not believe a test of the bonding mode is necessary, as there is no race between the packet handler and the bonding mode changing (the mode can only change when the device is closed). Also updated the log message to include the reproduction and full commit ids. -J ] Signed-off-by: Greg Edwards <greg.edwards@hp.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net> 25 July 2010, 03:37:48 UTC
0e1cf38 Len Brown 25 July 2010, 03:26:22 UTC Merge branch 'bugzilla-16396' into release 25 July 2010, 03:26:22 UTC
72ad5d7 Rafael J. Wysocki 23 July 2010, 20:59:09 UTC ACPI / Sleep: Allow the NVS saving to be skipped during suspend to RAM Commit 2a6b69765ad794389f2fc3e14a0afa1a995221c2 (ACPI: Store NVS state even when entering suspend to RAM) caused the ACPI suspend code save the NVS area during suspend and restore it during resume unconditionally, although it is known that some systems need to use acpi_sleep=s4_nonvs for hibernation to work. To allow the affected systems to avoid saving and restoring the NVS area during suspend to RAM and resume, introduce kernel command line option acpi_sleep=nonvs and make acpi_sleep=s4_nonvs work as its alias temporarily (add acpi_sleep=s4_nonvs to the feature removal file). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16396 . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: tomas m <tmezzadra@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com> 25 July 2010, 03:26:09 UTC
1dadcce Sage Weil 23 July 2010, 20:54:21 UTC ceph: fix dentry lease release When we embed a dentry lease release notification in a request, invalidate our lease so we don't think we still have it. Otherwise we can get all sorts of incorrect client behavior when multiple clients are interacting with the same part of the namespace. Signed-off-by: Sage Weil <sage@newdream.net> 23 July 2010, 20:54:21 UTC
86c65a7 Linus Torvalds 23 July 2010, 20:26:16 UTC Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: vmlinux.lds: fix .data..init_task output section (fix popwerpc boot) powerpc: Fix erroneous lmb->memblock conversions powerpc/mm: Add some debug output when hash insertion fails powerpc/mm: Fix bugs in huge page hashing powerpc/mm: Move around testing of _PAGE_PRESENT in hash code powerpc/mm: Handle hypervisor pte insert failure in __hash_page_huge powerpc/kexec: Fix boundary case for book-e kexec memory limits 23 July 2010, 20:26:16 UTC
20a52d4 Linus Torvalds 23 July 2010, 20:25:00 UTC Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: nconfig: Fix segfault when help contains special characters kbuild: Fix make rpm kbuild: Make the setlocalversion script POSIX-compliant 23 July 2010, 20:25:00 UTC
339a2af Linus Torvalds 23 July 2010, 20:24:02 UTC Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Fix fallback to cplus_demangle() when bfd_demangle() is not available perf annotate: Fix handling of goto labels that are valid hex numbers tracing: Properly align linker defined symbols perf symbols: Fix directory descriptor leaking perf: Fix various display bugs with parent filtering 23 July 2010, 20:24:02 UTC
8c69673 Sage Weil 22 July 2010, 21:11:56 UTC ceph: fix leak of dentry in ceph_init_dentry() error path If we fail to allocate a ceph_dentry_info, don't leak the dn reference. Signed-off-by: Sage Weil <sage@newdream.net> 23 July 2010, 17:02:07 UTC
bc4fdca Sage Weil 20 July 2010, 23:19:56 UTC ceph: fix pg_mapping leak on pg_temp updates Free the ceph_pg_mapping structs when they are removed from the pg_temp rbtree. Also fix a leak in the __insert_pg_mapping() error path. Signed-off-by: Sage Weil <sage@newdream.net> 23 July 2010, 17:02:06 UTC
252af52 Sage Weil 22 July 2010, 20:49:08 UTC ceph: fix d_release dop for snapdir, snapped dentries We need to set the d_release dop for snapdir and snapped dentries so that the ceph_dentry_info struct gets released. We also use the dcache to cache readdir results when possible, which only works if we know when dentries are dropped from the cache. Since we don't use the dcache for readdir in the hidden snapdir, avoid that case in ceph_dentry_release. Signed-off-by: Sage Weil <sage@newdream.net> 23 July 2010, 17:02:05 UTC
ff48780 Stefano Stabellini 21 July 2010, 17:32:37 UTC x86: Do not try to disable hpet if it hasn't been initialized before hpet_disable is called unconditionally on machine reboot if hpet support is compiled in the kernel. hpet_disable only checks if the machine is hpet capable but doesn't make sure that hpet has been initialized. [ tglx: Made it a one liner and removed the redundant hpet_address check ] Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Venkatesh Pallipadi <venki@google.com> LKML-Reference: <alpine.DEB.2.00.1007211726240.22235@kaball-desktop> Cc: stable@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 23 July 2010, 10:53:00 UTC
58f915a Stephen Boyd 23 July 2010, 07:04:14 UTC nconfig: Fix segfault when help contains special characters nconfig segfaults when help text contains the character '%'. For a quick example, navigate to the kernel compression options and get the help for bzip2. Doing so triggers a call to mvwprintw() with a string containing '%' and no extra arguments to fill in the specifier's value. Fix this case by printing the literal string retrieved from the kconfig. #0 0x00002b52b6b11d83 in vfprintf () from /lib/libc.so.6 #1 0x00002b52b6bad010 in __vsnprintf_chk () from /lib/libc.so.6 #2 0x00002b52b623991b in _nc_printf_string () from /lib/libncursesw.so.5 #3 0x00002b52b6234cff in vwprintw () from /lib/libncursesw.so.5 #4 0x00002b52b6234db9 in mvwprintw () from /lib/libncursesw.so.5 #5 0x00000000004151d8 in fill_window (win=0x21b64c0, text=0x21b62b0 "CONFIG_KERNEL_BZIP2:\n\nIts compression ratio and speed is intermediate.\nDecompression speed is slowest among the three. The kernel\nsize is about 10% smaller with bzip2, in comparison to gzip.\nBzip2 us"...) at scripts/kconfig/nconf.gui.c:229 #6 0x0000000000416335 in show_scroll_win (main_window=0x21a5630, title=0x157fa30 "Bzip2", text=0x21b62b0 "CONFIG_KERNEL_BZIP2:\n\nIts compression ratio and speed is intermediate.\nDecompression speed is slowest among the three. The kernel\nsize is about 10% smaller with bzip2, in comparison to gzip.\nBzip2 us"...) at scripts/kconfig/nconf.gui.c:535 #7 0x00000000004055b2 in show_help (menu=0x157f9d0) at scripts/kconfig/nconf.c:1257 #8 0x0000000000405897 in conf_choice (menu=0x157f130) at scripts/kconfig/nconf.c:1321 #9 0x0000000000405326 in conf (menu=0x157d130) at scripts/kconfig/nconf.c:1208 #10 0x00000000004052e8 in conf (menu=0xb434a0) at scripts/kconfig/nconf.c:1203 #11 0x0000000000406092 in main (ac=2, av=0x7fff96a93c38) Cc: Michal Marek <mmarek@suse.cz> Cc: Nir Tzachar <nir.tzachar@gmail.com> Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz> 23 July 2010, 09:23:42 UTC
7a73c02 Avi Kivity 22 July 2010, 20:24:52 UTC KVM: Use kmalloc() instead of vmalloc() for KVM_[GS]ET_MSR We don't need more than a page, and vmalloc() is slower (much slower recently due to a regression). Signed-off-by: Avi Kivity <avi@redhat.com> 23 July 2010, 06:07:14 UTC
6aa0b9d Xiao Guangrong 30 June 2010, 08:02:45 UTC KVM: MMU: fix conflict access permissions in direct sp In no-direct mapping, we mark sp is 'direct' when we mapping the guest's larger page, but its access is encoded form upper page-struct entire not include the last mapping, it will cause access conflict. For example, have this mapping: [W] / PDE1 -> |---| P[W] | | LPA \ PDE2 -> |---| [R] P have two children, PDE1 and PDE2, both PDE1 and PDE2 mapping the same lage page(LPA). The P's access is WR, PDE1's access is WR, PDE2's access is RO(just consider read-write permissions here) When guest access PDE1, we will create a direct sp for LPA, the sp's access is from P, is W, then we will mark the ptes is W in this sp. Then, guest access PDE2, we will find LPA's shadow page, is the same as PDE's, and mark the ptes is RO. So, if guest access PDE1, the incorrect #PF is occured. Fixed by encode the last mapping access into direct shadow page Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> 23 July 2010, 06:07:04 UTC
7ffb65f Benjamin Herrenschmidt 23 July 2010, 03:46:21 UTC Merge commit 'kumar/merge' into merge 23 July 2010, 03:46:21 UTC
da5e37e Sam Ravnborg 13 July 2010, 09:39:42 UTC vmlinux.lds: fix .data..init_task output section (fix popwerpc boot) The .data..init_task output section was missing a load offset causing a popwerpc target to fail to boot. Sean MacLennan tracked it down to the definition of INIT_TASK_DATA_SECTION(). There are only two users of INIT_TASK_DATA_SECTION() in the kernel today: cris and popwerpc. cris do not support relocatable kernels and is thus not impacted by this change. Fix INIT_TASK_DATA_SECTION() to specify load offset like all other output sections. Reported-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 23 July 2010, 03:45:12 UTC
3fdfd99 Benjamin Herrenschmidt 23 July 2010, 00:35:52 UTC powerpc: Fix erroneous lmb->memblock conversions Oooops... we missed these. We incorrectly converted strings used when parsing the device-tree on pseries, thus breaking access to drconf memory and hotplug memory. While at it, also revert some variable names that represent something the FW calls "lmb" and thus don't need to be converted to "memblock". Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- 23 July 2010, 02:56:57 UTC
4b8692c Benjamin Herrenschmidt 23 July 2010, 00:31:13 UTC powerpc/mm: Add some debug output when hash insertion fails This adds some debug output to our MMU hash code to print out some useful debug data if the hypervisor refuses the insertion (which should normally never happen). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- 23 July 2010, 02:56:56 UTC
171aa2c Benjamin Herrenschmidt 22 July 2010, 23:02:27 UTC powerpc/mm: Fix bugs in huge page hashing There's a couple of nasty bugs lurking in our huge page hashing code. First, we don't check the access permission atomically with setting the _PAGE_BUSY bit, which means that the PTE value we end up using for the hashing might be different than the one we have checked the access permissions for. We've seen cases where that leads us to try to use an invalidated PTE for hashing, causing all sort of "interesting" issues. Then, we also failed to set _PAGE_DIRTY on a write access. Finally, a minor tweak but we should return 0 when we find the PTE busy, in order to just re-execute the access, rather than 1 which means going to do_page_fault(). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- 23 July 2010, 02:55:21 UTC
ca91e6c Benjamin Herrenschmidt 22 July 2010, 22:53:23 UTC powerpc/mm: Move around testing of _PAGE_PRESENT in hash code Instead of adding _PAGE_PRESENT to the access permission mask in each low level routine independently, we add it once from hash_page(). We also move the preliminary access check (the racy one before the PTE is locked) up so it applies to the huge page case. This duplicates code in __hash_page_huge() which we'll remove in a subsequent patch to fix a race in there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 22 July 2010, 22:53:23 UTC
b1623e7 Anton Blanchard 14 July 2010, 19:31:48 UTC powerpc/mm: Handle hypervisor pte insert failure in __hash_page_huge If the hypervisor gives us an error on a hugepage insert we panic. The normal page code already handles this by returning an error instead and we end calling low_hash_fault which will just kill the task if possible. The patch below does a similar thing for the hugepage case. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 22 July 2010, 22:44:51 UTC
bbac30e Len Brown 22 July 2010, 22:19:12 UTC Merge branch 'misc' into release 22 July 2010, 22:19:12 UTC
4a973f2 Len Brown 22 July 2010, 22:18:28 UTC Merge branch 'bugzilla-15886' into release 22 July 2010, 22:18:28 UTC
be48b11 Len Brown 22 July 2010, 22:18:18 UTC Merge branch 'bugzilla-102904-workaround' into release 22 July 2010, 22:18:18 UTC
27568d8 Len Brown 22 July 2010, 22:18:05 UTC Merge branch 'bugzilla-16244' into release 22 July 2010, 22:18:05 UTC
855977e Len Brown 22 July 2010, 22:17:39 UTC Merge branch 'bugzilla-16271' into release 22 July 2010, 22:17:39 UTC
840ba24 Len Brown 22 July 2010, 22:17:33 UTC Merge branch 'bugzilla-16357' into release 22 July 2010, 22:17:33 UTC
41a8730 Alexey Shvetsov 22 July 2010, 20:35:16 UTC wimax/i2400m: Add PID & VID for Intel WiMAX 6250 This version of intel wimax device was found in my IBM ThinkPad x201 Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org> 22 July 2010, 21:50:34 UTC
d3e7e99 Len Brown 22 July 2010, 21:23:10 UTC ACPI: create "processor.bm_check_disable" boot param processor.bm_check_disable=1" prevents Linux from checking BM_STS before entering C3-type cpu power states. This may be useful for a system running acpi_idle where the BIOS exports FADT C-states, _CST IO C-states, or _CST FFH C-states with the BM_STS bit set; while configuring the chipset to set BM_STS more frequently than perhaps is optimal. Note that such systems may have been developed using a tickful OS that would quickly clear BM_STS, rather than a tickless OS that may go for some time between checking and clearing BM_STS. Note also that an alternative for newer systems is to use the intel_idle driver, which always ignores BM_STS, relying Linux device drivers to register constraints explicitly via PM_QOS. https://bugzilla.kernel.org/show_bug.cgi?id=15886 Signed-off-by: Len Brown <len.brown@intel.com> 22 July 2010, 21:23:10 UTC
718be4a Len Brown 22 July 2010, 20:54:27 UTC ACPI: skip checking BM_STS if the BIOS doesn't ask for it It turns out that there is a bit in the _CST for Intel FFH C3 that tells the OS if we should be checking BM_STS or not. Linux has been unconditionally checking BM_STS. If the chip-set is configured to enable BM_STS, it can retard or completely prevent entry into deep C-states -- as illustrated by turbostat: http://userweb.kernel.org/~lenb/acpi/utils/pmtools/turbostat/ ref: Intel Processor Vendor-Specific ACPI Interface Specification table 4 "_CST FFH GAS Field Encoding" Bit 1: Set to 1 if OSPM should use Bus Master avoidance for this C-state https://bugzilla.kernel.org/show_bug.cgi?id=15886 Signed-off-by: Len Brown <len.brown@intel.com> 22 July 2010, 20:54:27 UTC
a0dff78 Sage Weil 22 July 2010, 20:47:21 UTC ceph: avoid dcache readdir for snapdir We should always go to the MDS for readdir on the hidden snapdir. The set of snapshots can change at any time; the client can't trust its cache for that. Signed-off-by: Sage Weil <sage@newdream.net> 22 July 2010, 20:50:45 UTC
64e724f Brian Haley 20 July 2010, 10:34:30 UTC ipv6: Don't add routes to ipv6 disabled interfaces. If the interface has IPv6 disabled, don't add a multicast or link-local route since we won't be adding a link-local address. Reported-by: Mahesh Kelkar <maheshkelkar@gmail.com> Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 July 2010, 20:41:32 UTC
8a4fd31 Conny Seidel 06 July 2010, 15:39:43 UTC perf tools: Fix fallback to cplus_demangle() when bfd_demangle() is not available make version 3.80 doesn't support "else ifdef" on the same line, also it doesn't support unindented nested constructs. Build fails with: Makefile:608: Extraneous text after `else' directive Makefile:611: *** only one `else' per conditional. Stop. This patch fixes the build for make 3.80. Cc: Ingo Molnar <mingo@elte.hu>, Cc: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <1278430783-17259-1-git-send-email-conny.seidel@amd.com> Signed-off-by: Conny Seidel <conny.seidel@amd.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 22 July 2010, 20:30:39 UTC
be2b6e6 David S. Miller 22 July 2010, 20:27:09 UTC net: Fix skb_copy_expand() handling of ->csum_start It should only be adjusted if ip_summed == CHECKSUM_PARTIAL. Signed-off-by: David S. Miller <davem@davemloft.net> 22 July 2010, 20:27:09 UTC
00c5a98 Andrea Shepard 22 July 2010, 09:12:35 UTC net: Fix corruption of skb csum field in pskb_expand_head() of net/core/skbuff.c Make pskb_expand_head() check ip_summed to make sure csum_start is really csum_start and not csum before adjusting it. This fixes a bug I encountered using a Sun Quad-Fast Ethernet card and VLANs. On my configuration, the sunhme driver produces skbs with differing amounts of headroom on receive depending on the packet size. See line 2030 of drivers/net/sunhme.c; packets smaller than RX_COPY_THRESHOLD have 52 bytes of headroom but packets larger than that cutoff have only 20 bytes. When these packets reach the VLAN driver, vlan_check_reorder_header() calls skb_cow(), which, if the packet has less than NET_SKB_PAD (== 32) bytes of headroom, uses pskb_expand_head() to make more. Then, pskb_expand_head() needs to adjust a lot of offsets into the skb, including csum_start. Since csum_start is a union with csum, if the packet has a valid csum value this will corrupt it, which was the effect I observed. The sunhme hardware computes receive checksums, so the skbs would be created by the driver with ip_summed == CHECKSUM_COMPLETE and a valid csum field, and then pskb_expand_head() would corrupt the csum field, leading to an "hw csum error" message later on, for example in icmp_rcv() for pings larger than the sunhme RX_COPY_THRESHOLD. On the basis of the comment at the beginning of include/linux/skbuff.h, I believe that the csum_start skb field is only meaningful if ip_csummed is CSUM_PARTIAL, so this patch makes pskb_expand_head() adjust it only in that case to avoid corrupting a valid csum value. Please see my more in-depth disucssion of tracking down this bug for more details if you like: http://puellavulnerata.livejournal.com/112186.html http://puellavulnerata.livejournal.com/112567.html http://puellavulnerata.livejournal.com/112891.html http://puellavulnerata.livejournal.com/113096.html http://puellavulnerata.livejournal.com/113591.html I am not subscribed to this list, so please CC me on replies. Signed-off-by: Andrea Shepard <andrea@persephoneslair.org> Signed-off-by: David S. Miller <davem@davemloft.net> 22 July 2010, 20:25:18 UTC
8a35747 Herbert Xu 21 July 2010, 21:44:31 UTC macvtap: Limit packet queue length Mark Wagner reported OOM symptoms when sending UDP traffic over a macvtap link to a kvm receiver. This appears to be caused by the fact that macvtap packet queues are unlimited in length. This means that if the receiver can't keep up with the rate of flow, then we will hit OOM. Of course it gets worse if the OOM killer then decides to kill the receiver. This patch imposes a cap on the packet queue length, in the same way as the tuntap driver, using the device TX queue length. Please note that macvtap currently has no way of giving congestion notification, that means the software device TX queue cannot be used and packets will always be dropped once the macvtap driver queue fills up. This shouldn't be a great problem for the scenario where macvtap is used to feed a kvm receiver, as the traffic is most likely external in origin so congestion notification can't be applied anyway. Of course, if anybody decides to complain about guest-to-guest UDP packet loss down the track, then we may have to revisit this. Incidentally, this patch also fixes a real memory leak when macvtap_get_queue fails. Chris Wright noticed that for this patch to work, we need a non-zero TX queue length. This patch includes his work to change the default macvtap TX queue length to 500. Reported-by: Mark Wagner <mwagner@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> 22 July 2010, 20:08:56 UTC
b37fa16 Linus Torvalds 22 July 2010, 19:13:38 UTC Linux 2.6.35-rc6 22 July 2010, 19:13:38 UTC
27efd7e Linus Torvalds 22 July 2010, 18:46:15 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - relax capability ID checks on newer hardware Input: twl40300-keypad - fix handling of "all ground" rows Input: gamecon - reference correct pad in gc_psx_command() Input: gamecon - reference correct input device in NES mode Input: w90p910_keypad - change platfrom driver name to 'nuc900-kpi' Input: i8042 - add Gigabyte Spring Peak to dmi_noloop_table Input: qt2160 - rename kconfig symbol name 22 July 2010, 18:46:15 UTC
84d4db0 Linus Torvalds 22 July 2010, 18:45:57 UTC Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add quirk to make HP DV5000 laptop resume drm/radeon/kms: fix RADEON_INFO_CRTC_FROM_ID info ioctl Fix ttm_page_alloc.c build breakage drm/radeon/kms: fix legacy LVDS dpms sequence drm/radeon/kms: drop taking lock around crtc lookup. 22 July 2010, 18:45:57 UTC
38ea6e6 Linus Torvalds 22 July 2010, 18:45:23 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: talitos - fix bug in sg_copy_end_to_buffer 22 July 2010, 18:45:23 UTC
2851785 Linus Torvalds 22 July 2010, 18:45:02 UTC Merge branch 'x86/auditsyscall' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'x86/auditsyscall' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: x86: auditsyscall: fix fastpath return value after reschedule 22 July 2010, 18:45:02 UTC
e916bea Linus Torvalds 22 July 2010, 18:44:26 UTC Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: sysrq,kdb: Use __handle_sysrq() for kdb's sysrq function debug_core,kdb: fix kgdb_connected bit set in the wrong place Fix merge regression from external kdb to upstream kdb repair gdbstub to match the gdbserial protocol specification kdb: break out of kdb_ll() when command is terminated 22 July 2010, 18:44:26 UTC
23dcab8 Kumar Gala 22 July 2010, 18:30:44 UTC powerpc/kexec: Fix boundary case for book-e kexec memory limits The KEXEC_*_MEMORY_LIMITs are inclusive addresses. We define them as 2Gs as that is what we allow mapping via TLBs. However, this should be 2G - 1 to be inclusive, otherwise if we have >2G of memory in a system we fail to boot properly via kexec. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> 22 July 2010, 18:31:14 UTC
70a7cb3 Arnaldo Carvalho de Melo 22 July 2010, 17:04:13 UTC perf annotate: Fix handling of goto labels that are valid hex numbers When parsing the objdump disassembly output we can have goto labels that are valid hex numbers and thus get confused with lines with machine code. Handle the common case of a label that has nothing after it and other cases where there is just source code by validating the resulting "ip". It is still possible that we find goto labels that are in the function address range, but only if they are located before the real address we should be OK. A change in the objdump output to have a clear marker separating addresses from the disassembly would come handy, but we would still have to deal with older versions. Reported-by: Gleb Natapov <gleb@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <20100722170541.GF17631@ghostprotocols.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 22 July 2010, 17:04:13 UTC
4c0c03c David Howells 22 July 2010, 11:53:18 UTC CIFS: Fix a malicious redirect problem in the DNS lookup code Fix the security problem in the CIFS filesystem DNS lookup code in which a malicious redirect could be installed by a random user by simply adding a result record into one of their keyrings with add_key() and then invoking a CIFS CFS lookup [CVE-2010-2524]. This is done by creating an internal keyring specifically for the caching of DNS lookups. To enforce the use of this keyring, the module init routine creates a set of override credentials with the keyring installed as the thread keyring and instructs request_key() to only install lookup result keys in that keyring. The override is then applied around the call to request_key(). This has some additional benefits when a kernel service uses this module to request a key: (1) The result keys are owned by root, not the user that caused the lookup. (2) The result keys don't pop up in the user's keyrings. (3) The result keys don't come out of the quota of the user that caused the lookup. The keyring can be viewed as root by doing cat /proc/keys: 2a0ca6c3 I----- 1 perm 1f030000 0 0 keyring .dns_resolver: 1/4 It can then be listed with 'keyctl list' by root. # keyctl list 0x2a0ca6c3 1 key in keyring: 726766307: --alswrv 0 0 dns_resolver: foo.bar.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-Tested-by: Jeff Layton <jlayton@redhat.com> Acked-by: Steve French <smfrench@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 July 2010, 16:42:40 UTC
64dd3b7 wanzongshun 19 July 2010, 03:06:12 UTC ARM: 6233/1: Delete a wrong redundant right parenthesis Delete a wrong redundant right parenthesis in arch/arm/mach-footbridge/common.c Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 22 July 2010, 08:20:50 UTC
a7029c8 wanzongshun 18 July 2010, 14:10:07 UTC ARM: 6230/1: fix nuc900 touchscreen clk definition bug This patch is to fix nuc900 touchscreen clk definition bug,the .dev_id's name should be 'nuc900-ts', it should be the same to pdev.name. or else, the touchscreen driver will be not working well due to clock engine disabled. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 22 July 2010, 08:18:52 UTC
52fa2bb Alex Deucher 22 July 2010, 03:54:35 UTC drm/radeon/kms: add quirk to make HP DV5000 laptop resume Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29062 Reported-by: Andres Cimmarusti <acimmarusti@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 22 July 2010, 04:13:52 UTC
3619b8f Dmitry Torokhov 21 July 2010, 07:01:19 UTC Input: synaptics - relax capability ID checks on newer hardware Older firmwares fixed the middle byte of the Synaptics capabilities query to 0x47, but starting with firmware 7.5 the middle byte represents submodel ID, sometimes also called "dash number". Reported-and-tested-by: Miroslav Šulc <fordfrog@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> 22 July 2010, 01:39:03 UTC
0327559 Roland McGrath 22 July 2010, 00:44:12 UTC x86: auditsyscall: fix fastpath return value after reschedule In the CONFIG_AUDITSYSCALL fast-path for x86 64-bit system calls, we can pass a bad return value and/or error indication for the system call to audit_syscall_exit(). This happens when TIF_NEED_RESCHED was set as the system call returned, so we went out to schedule() and came back to the exit-audit fast-path. The fix is to reload the user return value register from the pt_regs before using it for audit_syscall_exit(). Both the 32-bit kernel's fast path and the 64-bit kernel's 32-bit system call fast paths work slightly differently, so that they always leave the fast path entirely to reschedule and don't return there, so they don't have the analogous bugs. Reported-by: Alexander Viro <aviro@redhat.com> Signed-off-by: Roland McGrath <roland@redhat.com> 22 July 2010, 00:44:12 UTC
edd63cb Jason Wessel 22 July 2010, 00:27:07 UTC sysrq,kdb: Use __handle_sysrq() for kdb's sysrq function The kdb code should not toggle the sysrq state in case an end user wants to try and resume the normal kernel execution. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 22 July 2010, 00:27:07 UTC
b0679c6 Jason Wessel 22 July 2010, 00:27:07 UTC debug_core,kdb: fix kgdb_connected bit set in the wrong place Immediately following an exit from the kdb shell the kgdb_connected variable should be set to zero, unless there are breakpoints planted. If the kgdb_connected variable is not zeroed out with kdb, it is impossible to turn off kdb. This patch is merely a work around for now, the real fix will check for the breakpoints. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 22 July 2010, 00:27:07 UTC
9e8b624 Jason Wessel 22 July 2010, 00:27:06 UTC Fix merge regression from external kdb to upstream kdb In the process of merging kdb to the mainline, the kdb lsmod command stopped printing the base load address of kernel modules. This is needed for using kdb in conjunction with external tools such as gdb. Simply restore the functionality by adding a kdb_printf for the base load address of the kernel modules. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 22 July 2010, 00:27:06 UTC
fb82c0f Jason Wessel 22 July 2010, 00:27:05 UTC repair gdbstub to match the gdbserial protocol specification The gdbserial protocol handler should return an empty packet instead of an error string when ever it responds to a command it does not implement. The problem cases come from a debugger client sending qTBuffer, qTStatus, qSearch, qSupported. The incorrect response from the gdbstub leads the debugger clients to not function correctly. Recent versions of gdb will not detach correctly as a result of this behavior. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> 22 July 2010, 00:27:05 UTC
1396a21 Martin Hicks 22 July 2010, 00:27:05 UTC kdb: break out of kdb_ll() when command is terminated Without this patch the "ll" linked-list traversal command won't terminate when you hit q/Q. Signed-off-by: Martin Hicks <mort@sgi.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 22 July 2010, 00:27:05 UTC
back to top