https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
830b3c6 Linux 6.1 11 December 2022, 22:15:18 UTC
d92b86f Merge tag 'iommu-fix-v6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fix from Joerg Roedel: - Fix device mask to catch all affected devices in the recently added quirk for QAT devices in the Intel VT-d driver. * tag 'iommu-fix-v6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Fix buggy QAT device mask 11 December 2022, 17:49:39 UTC
4cee37b Merge tag 'mm-hotfixes-stable-2022-12-10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Nine hotfixes. Six for MM, three for other areas. Four of these patches address post-6.0 issues" * tag 'mm-hotfixes-stable-2022-12-10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: memcg: fix possible use-after-free in memcg_write_event_control() MAINTAINERS: update Muchun Song's email mm/gup: fix gup_pud_range() for dax mmap: fix do_brk_flags() modifying obviously incorrect VMAs mm/swap: fix SWP_PFN_BITS with CONFIG_PHYS_ADDR_T_64BIT on 32bit tmpfs: fix data loss from failed fallocate kselftests: cgroup: update kmem test precision tolerance mm: do not BUG_ON missing brk mapping, because userspace can unmap it mailmap: update Matti Vaittinen's email address 11 December 2022, 01:10:52 UTC
296a7b7 Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM fix from Russell King: "One further ARM fix for 6.1 from Wang Kefeng, fixing up the handling for kfence faults" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9278/1: kfence: only handle translation faults 10 December 2022, 18:14:52 UTC
4a7ba45 memcg: fix possible use-after-free in memcg_write_event_control() memcg_write_event_control() accesses the dentry->d_name of the specified control fd to route the write call. As a cgroup interface file can't be renamed, it's safe to access d_name as long as the specified file is a regular cgroup file. Also, as these cgroup interface files can't be removed before the directory, it's safe to access the parent too. Prior to 347c4a874710 ("memcg: remove cgroup_event->cft"), there was a call to __file_cft() which verified that the specified file is a regular cgroupfs file before further accesses. The cftype pointer returned from __file_cft() was no longer necessary and the commit inadvertently dropped the file type check with it allowing any file to slip through. With the invarients broken, the d_name and parent accesses can now race against renames and removals of arbitrary files and cause use-after-free's. Fix the bug by resurrecting the file type check in __file_cft(). Now that cgroupfs is implemented through kernfs, checking the file operations needs to go through a layer of indirection. Instead, let's check the superblock and dentry type. Link: https://lkml.kernel.org/r/Y5FRm/cfcKPGzWwl@slm.duckdns.org Fixes: 347c4a874710 ("memcg: remove cgroup_event->cft") Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Jann Horn <jannh@google.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> [3.14+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 10 December 2022, 02:41:17 UTC
a501788 MAINTAINERS: update Muchun Song's email I'm moving to the @linux.dev account. Map my old addresses and update it to my new address. Link: https://lkml.kernel.org/r/20221208115548.85244-1-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 10 December 2022, 02:41:17 UTC
fcd0ccd mm/gup: fix gup_pud_range() for dax For dax pud, pud_huge() returns true on x86. So the function works as long as hugetlb is configured. However, dax doesn't depend on hugetlb. Commit 414fd080d125 ("mm/gup: fix gup_pmd_range() for dax") fixed devmap-backed huge PMDs, but missed devmap-backed huge PUDs. Fix this as well. This fixes the below kernel panic: general protection fault, probably for non-canonical address 0x69e7c000cc478: 0000 [#1] SMP < snip > Call Trace: <TASK> get_user_pages_fast+0x1f/0x40 iov_iter_get_pages+0xc6/0x3b0 ? mempool_alloc+0x5d/0x170 bio_iov_iter_get_pages+0x82/0x4e0 ? bvec_alloc+0x91/0xc0 ? bio_alloc_bioset+0x19a/0x2a0 blkdev_direct_IO+0x282/0x480 ? __io_complete_rw_common+0xc0/0xc0 ? filemap_range_has_page+0x82/0xc0 generic_file_direct_write+0x9d/0x1a0 ? inode_update_time+0x24/0x30 __generic_file_write_iter+0xbd/0x1e0 blkdev_write_iter+0xb4/0x150 ? io_import_iovec+0x8d/0x340 io_write+0xf9/0x300 io_issue_sqe+0x3c3/0x1d30 ? sysvec_reschedule_ipi+0x6c/0x80 __io_queue_sqe+0x33/0x240 ? fget+0x76/0xa0 io_submit_sqes+0xe6a/0x18d0 ? __fget_light+0xd1/0x100 __x64_sys_io_uring_enter+0x199/0x880 ? __context_tracking_enter+0x1f/0x70 ? irqentry_exit_to_user_mode+0x24/0x30 ? irqentry_exit+0x1d/0x30 ? __context_tracking_exit+0xe/0x70 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x61/0xcb RIP: 0033:0x7fc97c11a7be < snip > </TASK> ---[ end trace 48b2e0e67debcaeb ]--- RIP: 0010:internal_get_user_pages_fast+0x340/0x990 < snip > Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Link: https://lkml.kernel.org/r/1670392853-28252-1-git-send-email-ssengar@linux.microsoft.com Fixes: 414fd080d125 ("mm/gup: fix gup_pmd_range() for dax") Signed-off-by: John Starks <jostarks@microsoft.com> Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Cc: Jan Kara <jack@suse.cz> Cc: Yu Zhao <yuzhao@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 10 December 2022, 02:41:17 UTC
6c28ca6 mmap: fix do_brk_flags() modifying obviously incorrect VMAs Add more sanity checks to the VMA that do_brk_flags() will expand. Ensure the VMA matches basic merge requirements within the function before calling can_vma_merge_after(). Drop the duplicate checks from vm_brk_flags() since they will be enforced later. The old code would expand file VMAs on brk(), which is functionally wrong and also dangerous in terms of locking because the brk() path isn't designed for file VMAs and therefore doesn't lock the file mapping. Checking can_vma_merge_after() ensures that new anonymous VMAs can't be merged into file VMAs. See https://lore.kernel.org/linux-mm/CAG48ez1tJZTOjS_FjRZhvtDA-STFmdw8PEizPDwMGFd_ui0Nrw@mail.gmail.com/ Link: https://lkml.kernel.org/r/20221205192304.1957418-1-Liam.Howlett@oracle.com Fixes: 2e7ce7d354f2 ("mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Suggested-by: Jann Horn <jannh@google.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: SeongJae Park <sj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 10 December 2022, 02:41:16 UTC
630dc25 mm/swap: fix SWP_PFN_BITS with CONFIG_PHYS_ADDR_T_64BIT on 32bit We use "unsigned long" to store a PFN in the kernel and phys_addr_t to store a physical address. On a 64bit system, both are 64bit wide. However, on a 32bit system, the latter might be 64bit wide. This is, for example, the case on x86 with PAE: phys_addr_t and PTEs are 64bit wide, while "unsigned long" only spans 32bit. The current definition of SWP_PFN_BITS without MAX_PHYSMEM_BITS misses that case, and assumes that the maximum PFN is limited by an 32bit phys_addr_t. This implies, that SWP_PFN_BITS will currently only be able to cover 4 GiB - 1 on any 32bit system with 4k page size, which is wrong. Let's rely on the number of bits in phys_addr_t instead, but make sure to not exceed the maximum swap offset, to not make the BUILD_BUG_ON() in is_pfn_swap_entry() unhappy. Note that swp_entry_t is effectively an unsigned long and the maximum swap offset shares that value with the swap type. For example, on an 8 GiB x86 PAE system with a kernel config based on Debian 11.5 (-> CONFIG_FLATMEM=y, CONFIG_X86_PAE=y), we will currently fail removing migration entries (remove_migration_ptes()), because mm/page_vma_mapped.c:check_pte() will fail to identify a PFN match as swp_offset_pfn() wrongly masks off PFN bits. For example, split_huge_page_to_list()->...->remap_page() will leave migration entries in place and continue to unlock the page. Later, when we stumble over these migration entries (e.g., via /proc/self/pagemap), pfn_swap_entry_to_page() will BUG_ON() because these migration entries shouldn't exist anymore and the page was unlocked. [ 33.067591] kernel BUG at include/linux/swapops.h:497! [ 33.067597] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 33.067602] CPU: 3 PID: 742 Comm: cow Tainted: G E 6.1.0-rc8+ #16 [ 33.067605] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 [ 33.067606] EIP: pagemap_pmd_range+0x644/0x650 [ 33.067612] Code: 00 00 00 00 66 90 89 ce b9 00 f0 ff ff e9 ff fb ff ff 89 d8 31 db e8 48 c6 52 00 e9 23 fb ff ff e8 61 83 56 00 e9 b6 fe ff ff <0f> 0b bf 00 f0 ff ff e9 38 fa ff ff 3e 8d 74 26 00 55 89 e5 57 31 [ 33.067615] EAX: ee394000 EBX: 00000002 ECX: ee394000 EDX: 00000000 [ 33.067617] ESI: c1b0ded4 EDI: 00024a00 EBP: c1b0ddb4 ESP: c1b0dd68 [ 33.067619] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00010246 [ 33.067624] CR0: 80050033 CR2: b7a00000 CR3: 01bbbd20 CR4: 00350ef0 [ 33.067625] Call Trace: [ 33.067628] ? madvise_free_pte_range+0x720/0x720 [ 33.067632] ? smaps_pte_range+0x4b0/0x4b0 [ 33.067634] walk_pgd_range+0x325/0x720 [ 33.067637] ? mt_find+0x1d6/0x3a0 [ 33.067641] ? mt_find+0x1d6/0x3a0 [ 33.067643] __walk_page_range+0x164/0x170 [ 33.067646] walk_page_range+0xf9/0x170 [ 33.067648] ? __kmem_cache_alloc_node+0x2a8/0x340 [ 33.067653] pagemap_read+0x124/0x280 [ 33.067658] ? default_llseek+0x101/0x160 [ 33.067662] ? smaps_account+0x1d0/0x1d0 [ 33.067664] vfs_read+0x90/0x290 [ 33.067667] ? do_madvise.part.0+0x24b/0x390 [ 33.067669] ? debug_smp_processor_id+0x12/0x20 [ 33.067673] ksys_pread64+0x58/0x90 [ 33.067675] __ia32_sys_ia32_pread64+0x1b/0x20 [ 33.067680] __do_fast_syscall_32+0x4c/0xc0 [ 33.067683] do_fast_syscall_32+0x29/0x60 [ 33.067686] do_SYSENTER_32+0x15/0x20 [ 33.067689] entry_SYSENTER_32+0x98/0xf1 Decrease the indentation level of SWP_PFN_BITS and SWP_PFN_MASK to keep it readable and consistent. [david@redhat.com: rely on sizeof(phys_addr_t) and min_t() instead] Link: https://lkml.kernel.org/r/20221206105737.69478-1-david@redhat.com [david@redhat.com: use "int" for comparison, as we're only comparing numbers < 64] Link: https://lkml.kernel.org/r/1f157500-2676-7cef-a84e-9224ed64e540@redhat.com Link: https://lkml.kernel.org/r/20221205150857.167583-1-david@redhat.com Fixes: 0d206b5d2e0d ("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry") Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 10 December 2022, 02:41:16 UTC
44bcabd tmpfs: fix data loss from failed fallocate Fix tmpfs data loss when the fallocate system call is interrupted by a signal, or fails for some other reason. The partial folio handling in shmem_undo_range() forgot to consider this unfalloc case, and was liable to erase or truncate out data which had already been committed earlier. It turns out that none of the partial folio handling there is appropriate for the unfalloc case, which just wants to proceed to removal of whole folios: which find_get_entries() provides, even when partially covered. Original patch by Rui Wang. Link: https://lore.kernel.org/linux-mm/33b85d82.7764.1842e9ab207.Coremail.chenguoqic@163.com/ Link: https://lkml.kernel.org/r/a5dac112-cf4b-7af-a33-f386e347fd38@google.com Fixes: b9a8a4195c7d ("truncate,shmem: Handle truncates that split large folios") Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Guoqi Chen <chenguoqic@163.com> Link: https://lore.kernel.org/all/20221101032248.819360-1-kernel@hev.cc/ Cc: Rui Wang <kernel@hev.cc> Cc: Huacai Chen <chenhuacai@loongson.cn> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Cc: <stable@vger.kernel.org> [5.17+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 10 December 2022, 02:41:16 UTC
de16d6e kselftests: cgroup: update kmem test precision tolerance 1813e51eece0 ("memcg: increase MEMCG_CHARGE_BATCH to 64") has changed the batch size while this test case has been left behind. This has led to a test failure reported by test bot: not ok 2 selftests: cgroup: test_kmem # exit=1 Update the tolerance for the pcp charges to reflect the MEMCG_CHARGE_BATCH change to fix this. [akpm@linux-foundation.org: update comments, per Roman] Link: https://lkml.kernel.org/r/Y4m8Unt6FhWKC6IH@dhcp22.suse.cz Fixes: 1813e51eece0a ("memcg: increase MEMCG_CHARGE_BATCH to 64") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: kernel test robot <yujie.liu@intel.com> Link: https://lore.kernel.org/oe-lkp/202212010958.c1053bd3-yujie.liu@intel.com Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Tested-by: Yujie Liu <yujie.liu@intel.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Michal Koutný" <mkoutny@suse.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 10 December 2022, 02:41:16 UTC
f5ad508 mm: do not BUG_ON missing brk mapping, because userspace can unmap it The following program will trigger the BUG_ON that this patch removes, because the user can munmap() mm->brk: #include <sys/syscall.h> #include <sys/mman.h> #include <assert.h> #include <unistd.h> static void *brk_now(void) { return (void *)syscall(SYS_brk, 0); } static void brk_set(void *b) { assert(syscall(SYS_brk, b) != -1); } int main(int argc, char *argv[]) { void *b = brk_now(); brk_set(b + 4096); assert(munmap(b - 4096, 4096 * 2) == 0); brk_set(b); return 0; } Compile that with musl, since glibc actually uses brk(), and then execute it, and it'll hit this splat: kernel BUG at mm/mmap.c:229! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 12 PID: 1379 Comm: a.out Tainted: G S U 6.1.0-rc7+ #419 RIP: 0010:__do_sys_brk+0x2fc/0x340 Code: 00 00 4c 89 ef e8 04 d3 fe ff eb 9a be 01 00 00 00 4c 89 ff e8 35 e0 fe ff e9 6e ff ff ff 4d 89 a7 20> RSP: 0018:ffff888140bc7eb0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000007e7000 RCX: ffff8881020fe000 RDX: ffff8881020fe001 RSI: ffff8881955c9b00 RDI: ffff8881955c9b08 RBP: 0000000000000000 R08: ffff8881955c9b00 R09: 00007ffc77844000 R10: 0000000000000000 R11: 0000000000000001 R12: 00000000007e8000 R13: 00000000007e8000 R14: 00000000007e7000 R15: ffff8881020fe000 FS: 0000000000604298(0000) GS:ffff88901f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000603fe0 CR3: 000000015ba9a005 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x400678 Code: 10 4c 8d 41 08 4c 89 44 24 10 4c 8b 01 8b 4c 24 08 83 f9 2f 77 0a 4c 8d 4c 24 20 4c 01 c9 eb 05 48 8b> RSP: 002b:00007ffc77863890 EFLAGS: 00000212 ORIG_RAX: 000000000000000c RAX: ffffffffffffffda RBX: 000000000040031b RCX: 0000000000400678 RDX: 00000000004006a1 RSI: 00000000007e6000 RDI: 00000000007e7000 RBP: 00007ffc77863900 R08: 0000000000000000 R09: 00000000007e6000 R10: 00007ffc77863930 R11: 0000000000000212 R12: 00007ffc77863978 R13: 00007ffc77863988 R14: 0000000000000000 R15: 0000000000000000 </TASK> Instead, just return the old brk value if the original mapping has been removed. [akpm@linux-foundation.org: fix changelog, per Liam] Link: https://lkml.kernel.org/r/20221202162724.2009-1-Jason@zx2c4.com Fixes: 2e7ce7d354f2 ("mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 10 December 2022, 02:41:16 UTC
38f1d4a mailmap: update Matti Vaittinen's email address The email backend used by ROHM keeps labeling patches as spam. This can result in missing the patches. Switch my mail address from a company mail to a personal one. Link: https://lkml.kernel.org/r/8f4498b66fedcbded37b3b87e0c516e659f8f583.1669912977.git.mazziesaccount@gmail.com Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Anup Patel <anup@brainfault.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Atish Patra <atishp@atishpatra.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Ben Widawsky <bwidawsk@kernel.org> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Qais Yousef <qyousef@layalina.io> Cc: Vasily Averin <vasily.averin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 10 December 2022, 02:41:16 UTC
3ecc379 Merge tag 'media/v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fix from Mauro Carvalho Chehab: "A v4l-core fix related to validating DV timings related to video blanking values" * tag 'media/v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: v4l2-dv-timings.c: fix too strict blanking sanity checks 09 December 2022, 18:45:51 UTC
9857feb Merge tag 'soc-fixes-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fix from Arnd Bergmann: "One more last minute revert for a boot regression that was found on the popular colibri-imx7" * tag 'soc-fixes-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: Revert "ARM: dts: imx7: Fix NAND controller size-cells" 09 December 2022, 18:32:40 UTC
0d1409e Merge tag 'drm-fixes-2022-12-09' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Last set of fixes for final, scattered bunch of fixes, two amdgpu, one vmwgfx, and some misc others. amdgpu: - S0ix fix - DCN 3.2 array out of bounds fix shmem: - Fixes to shmem-helper error paths bridge: - Fix polarity bug in bridge/ti-sn65dsi86 dw-hdmi: - Prefer 8-bit RGB fallback before any YUV mode in dw-hdmi, since some panels lie about YUV support vmwgfx: - Stop using screen objects when SEV is active" * tag 'drm-fixes-2022-12-09' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: fix array index out of bound error in DCN32 DML drm/amdgpu/sdma_v4_0: turn off SDMA ring buffer in the s2idle suspend drm/vmwgfx: Don't use screen objects when SEV is active drm/shmem-helper: Avoid vm_open error paths drm/shmem-helper: Remove errant put in error path drm: bridge: dw_hdmi: fix preference of RGB modes over YUV420 drm/bridge: ti-sn65dsi86: Fix output polarity setting bug drm/vmwgfx: Fix race issue calling pin_user_pages 09 December 2022, 00:58:31 UTC
c425265 Merge tag 'drm-misc-fixes-2022-12-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v6.1 final?: - Fix polarity bug in bridge/ti-sn65dsi86. - Prefer 8-bit RGB fallback before any YUV mode in dw-hdmi, since some panels lie about YUV support. - Fixes to shmem-helper error paths. - Small vmwgfx to stop using screen objects when SEV is active. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8110f02d-d155-926e-8674-c88b806c3a3a@linux.intel.com 09 December 2022, 00:11:06 UTC
b4b241a Merge tag 'amd-drm-fixes-6.1-2022-12-07' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.1-2022-12-07: amdgpu: - S0ix fix - DCN 3.2 array out of bounds fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221207222751.9558-1-alexander.deucher@amd.com 09 December 2022, 00:09:58 UTC
859c73d Merge tag 'block-6.1-2022-12-08' of git://git.kernel.dk/linux Pull block fix from Jens Axboe: "A small fix for initializing the NVMe quirks before initializing the subsystem" * tag 'block-6.1-2022-12-08' of git://git.kernel.dk/linux: nvme initialize core quirks before calling nvme_init_subsystem 08 December 2022, 23:53:39 UTC
af14550 Merge tag 'io_uring-6.1-2022-12-08' of git://git.kernel.dk/linux Pull io_uring fix from Jens Axboe: "A single small fix for an issue related to ordering between cancelation and current->io_uring teardown" * tag 'io_uring-6.1-2022-12-08' of git://git.kernel.dk/linux: io_uring: Fix a null-ptr-deref in io_tctx_exit_cb() 08 December 2022, 23:44:09 UTC
010b676 Merge tag 'net-6.1-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, can and netfilter. Current release - new code bugs: - bonding: ipv6: correct address used in Neighbour Advertisement parsing (src vs dst typo) - fec: properly scope IRQ coalesce setup during link up to supported chips only Previous releases - regressions: - Bluetooth fixes for fake CSR clones (knockoffs): - re-add ERR_DATA_REPORTING quirk - fix crash when device is replugged - Bluetooth: - silence a user-triggerable dmesg error message - L2CAP: fix u8 overflow, oob access - correct vendor codec definition - fix support for Read Local Supported Codecs V2 - ti: am65-cpsw: fix RGMII configuration at SPEED_10 - mana: fix race on per-CQ variable NAPI work_done Previous releases - always broken: - af_unix: diag: fetch user_ns from in_skb in unix_diag_get_exact(), avoid null-deref - af_can: fix NULL pointer dereference in can_rcv_filter - can: slcan: fix UAF with a freed work - can: can327: flush TX_work on ldisc .close() - macsec: add missing attribute validation for offload - ipv6: avoid use-after-free in ip6_fragment() - nft_set_pipapo: actually validate intervals in fields after the first one - mvneta: prevent oob access in mvneta_config_rss() - ipv4: fix incorrect route flushing when table ID 0 is used, or when source address is deleted - phy: mxl-gpy: add workaround for IRQ bug on GPY215B and GPY215C" * tag 'net-6.1-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits) net: dsa: sja1105: avoid out of bounds access in sja1105_init_l2_policing() s390/qeth: fix use-after-free in hsci macsec: add missing attribute validation for offload net: mvneta: Fix an out of bounds check net: thunderbolt: fix memory leak in tbnet_open() ipv6: avoid use-after-free in ip6_fragment() net: plip: don't call kfree_skb/dev_kfree_skb() under spin_lock_irq() net: phy: mxl-gpy: add MDINT workaround net: dsa: mv88e6xxx: accept phy-mode = "internal" for internal PHY ports xen/netback: don't call kfree_skb() under spin_lock_irqsave() dpaa2-switch: Fix memory leak in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove() ethernet: aeroflex: fix potential skb leak in greth_init_rings() tipc: call tipc_lxc_xmit without holding node_read_lock can: esd_usb: Allow REC and TEC to return to zero can: can327: flush TX_work on ldisc .close() can: slcan: fix freed work crash can: af_can: fix NULL pointer dereference in can_rcv_filter net: dsa: sja1105: fix memory leak in sja1105_setup_devlink_regions() ipv4: Fix incorrect route flushing when table ID 0 is used ipv4: Fix incorrect route flushing when source address is deleted ... 08 December 2022, 23:32:13 UTC
ce19275 Merge tag 'for-linus-2022120801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: "A regression fix for handling Logitech HID++ devices and memory corruption fixes: - regression fix (revert) for catch-all handling of Logitech HID++ Bluetooth devices; there are devices that turn out not to work with this, and the root cause is yet to be properly understood. So we are dropping it for now, and it will be revisited for 6.2 or 6.3 (Benjamin Tissoires) - memory corruption fix in HID core (ZhangPeng) - memory corruption fix in hid-lg4ff (Anastasia Belova) - Kconfig fix for I2C_HID (Benjamin Tissoires) - a few device-id specific quirks that piggy-back on top of the important fixes above" * tag 'for-linus-2022120801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: Revert "HID: logitech-hidpp: Enable HID++ for all the Logitech Bluetooth devices" Revert "HID: logitech-hidpp: Remove special-casing of Bluetooth devices" HID: usbhid: Add ALWAYS_POLL quirk for some mice HID: core: fix shift-out-of-bounds in hid_report_raw_event HID: uclogic: Add HID_QUIRK_HIDINPUT_FORCE quirk HID: fix I2C_HID not selected when I2C_HID_OF_ELAN is HID: hid-lg4ff: Add check for empty lbuf HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch V 10 HID: uclogic: Fix frame templates for big endian architectures 08 December 2022, 20:37:42 UTC
f3e8416 Merge tag 'soc-fixes-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fix from Arnd Bergmann: "One last build fix came in, addressing a link failure when building without CONFIG_OUTER_CACHE" * tag 'soc-fixes-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: at91: fix build for SAMA5D3 w/o L2 cache 08 December 2022, 19:22:27 UTC
a9d9e46 Revert "HID: logitech-hidpp: Enable HID++ for all the Logitech Bluetooth devices" This reverts commit 532223c8ac57605a10e46dc0ab23dcf01c9acb43. As reported in [0], hid-logitech-hidpp now binds on all bluetooth mice, but there are corner cases where hid-logitech-hidpp just gives up on the mouse. This leads the end user with a dead mouse. Given that we are at -rc8, we are definitively too late to find a proper fix. We already identified 2 issues less than 24 hours after the bug report. One in that ->match() was never designed to be used anywhere else than in hid-generic, and the other that hid-logitech-hidpp has corner cases where it gives up on devices it is not supposed to. So we have no choice but postpone this patch to the next kernel release. [0] https://lore.kernel.org/linux-input/CAJZ5v0g-_o4AqMgNwihCb0jrwrcJZfRrX=jv8aH54WNKO7QB8A@mail.gmail.com/ Reported-by: Rafael J . Wysocki <rjw@rjwysocki.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 08 December 2022, 19:18:11 UTC
40f2432 Revert "HID: logitech-hidpp: Remove special-casing of Bluetooth devices" This reverts commit 8544c812e43ab7bdf40458411b83987b8cba924d. We need to revert commit 532223c8ac57 ("HID: logitech-hidpp: Enable HID++ for all the Logitech Bluetooth devices") because that commit might make hid-logitech-hidpp bind on mice that are not well enough supported by hid-logitech-hidpp, and the end result is that the probe of those mice is now returning -ENODEV, leaving the end user with a dead mouse. Given that commit 8544c812e43a ("HID: logitech-hidpp: Remove special-casing of Bluetooth devices") is a direct dependency of 532223c8ac57, revert it too. Note that this also adapt according to commit 908d325e1665 ("HID: logitech-hidpp: Detect hi-res scrolling support") to re-add support of the devices that were removed from that commit too. I have locally an MX Master and I tested this device with that revert, ensuring we still have high-res scrolling. Reported-by: Rafael J . Wysocki <rjw@rjwysocki.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 08 December 2022, 19:18:11 UTC
7f043b7 Merge tag 'loongarch-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Export smp_send_reschedule() for modules use, fix a huge page entry update issue, and add documents for booting description" * tag 'loongarch-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: docs/zh_CN: Add LoongArch booting description's translation docs/LoongArch: Add booting description LoongArch: mm: Fix huge page entry update for virtual machine LoongArch: Export symbol for function smp_send_reschedule() 08 December 2022, 19:16:15 UTC
a4c3a07 Merge tag 'for-linus-xsa-6.1-rc9b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "A single fix for the recent security issue XSA-423" * tag 'for-linus-xsa-6.1-rc9b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/netback: fix build warning 08 December 2022, 19:11:06 UTC
306ba24 Merge tag 'gpio-fixes-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix a memory leak in gpiolib core - fix reference leaks in gpio-amd8111 and gpio-rockchip * tag 'gpio-fixes-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio/rockchip: fix refcount leak in rockchip_gpiolib_register() gpio: amd8111: Fix PCI device reference count leak gpiolib: fix memory leak in gpiochip_setup_dev() 08 December 2022, 19:00:42 UTC
57fb3f6 Merge tag 'ata-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA fix from Damien Le Moal: - Avoid a NULL pointer dereference in the libahci platform code that can happen on initialization when a device tree does not specify names for the adapter clocks (from Anders) * tag 'ata-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libahci_platform: ahci_platform_find_clk: oops, NULL pointer 08 December 2022, 18:46:52 UTC
fbf8321 memcg: Fix possible use-after-free in memcg_write_event_control() memcg_write_event_control() accesses the dentry->d_name of the specified control fd to route the write call. As a cgroup interface file can't be renamed, it's safe to access d_name as long as the specified file is a regular cgroup file. Also, as these cgroup interface files can't be removed before the directory, it's safe to access the parent too. Prior to 347c4a874710 ("memcg: remove cgroup_event->cft"), there was a call to __file_cft() which verified that the specified file is a regular cgroupfs file before further accesses. The cftype pointer returned from __file_cft() was no longer necessary and the commit inadvertently dropped the file type check with it allowing any file to slip through. With the invarients broken, the d_name and parent accesses can now race against renames and removals of arbitrary files and cause use-after-free's. Fix the bug by resurrecting the file type check in __file_cft(). Now that cgroupfs is implemented through kernfs, checking the file operations needs to go through a layer of indirection. Instead, let's check the superblock and dentry type. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: 347c4a874710 ("memcg: remove cgroup_event->cft") Cc: stable@kernel.org # v3.14+ Reported-by: Jann Horn <jannh@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 08 December 2022, 18:40:58 UTC
f8bac7f net: dsa: sja1105: avoid out of bounds access in sja1105_init_l2_policing() The SJA1105 family has 45 L2 policing table entries (SJA1105_MAX_L2_POLICING_COUNT) and SJA1110 has 110 (SJA1110_MAX_L2_POLICING_COUNT). Keeping the table structure but accounting for the difference in port count (5 in SJA1105 vs 10 in SJA1110) does not fully explain the difference. Rather, the SJA1110 also has L2 ingress policers for multicast traffic. If a packet is classified as multicast, it will be processed by the policer index 99 + SRCPORT. The sja1105_init_l2_policing() function initializes all L2 policers such that they don't interfere with normal packet reception by default. To have a common code between SJA1105 and SJA1110, the index of the multicast policer for the port is calculated because it's an index that is out of bounds for SJA1105 but in bounds for SJA1110, and a bounds check is performed. The code fails to do the proper thing when determining what to do with the multicast policer of port 0 on SJA1105 (ds->num_ports = 5). The "mcast" index will be equal to 45, which is also equal to table->ops->max_entry_count (SJA1105_MAX_L2_POLICING_COUNT). So it passes through the check. But at the same time, SJA1105 doesn't have multicast policers. So the code programs the SHARINDX field of an out-of-bounds element in the L2 Policing table of the static config. The comparison between index 45 and 45 entries should have determined the code to not access this policer index on SJA1105, since its memory wasn't even allocated. With enough bad luck, the out-of-bounds write could even overwrite other valid kernel data, but in this case, the issue was detected using KASAN. Kernel log: sja1105 spi5.0: Probed switch chip: SJA1105Q ================================================================== BUG: KASAN: slab-out-of-bounds in sja1105_setup+0x1cbc/0x2340 Write of size 8 at addr ffffff880bd57708 by task kworker/u8:0/8 ... Workqueue: events_unbound deferred_probe_work_func Call trace: ... sja1105_setup+0x1cbc/0x2340 dsa_register_switch+0x1284/0x18d0 sja1105_probe+0x748/0x840 ... Allocated by task 8: ... sja1105_setup+0x1bcc/0x2340 dsa_register_switch+0x1284/0x18d0 sja1105_probe+0x748/0x840 ... Fixes: 38fbe91f2287 ("net: dsa: sja1105: configure the multicast policers, if present") CC: stable@vger.kernel.org # 5.15+ Signed-off-by: Radu Nicolae Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20221207132347.38698-1-radu-nicolae.pirea@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 December 2022, 17:38:31 UTC
ebaaadc s390/qeth: fix use-after-free in hsci KASAN found that addr was dereferenced after br2dev_event_work was freed. ================================================================== BUG: KASAN: use-after-free in qeth_l2_br2dev_worker+0x5ba/0x6b0 Read of size 1 at addr 00000000fdcea440 by task kworker/u760:4/540 CPU: 17 PID: 540 Comm: kworker/u760:4 Tainted: G E 6.1.0-20221128.rc7.git1.5aa3bed4ce83.300.fc36.s390x+kasan #1 Hardware name: IBM 8561 T01 703 (LPAR) Workqueue: 0.0.8000_event qeth_l2_br2dev_worker Call Trace: [<000000016944d4ce>] dump_stack_lvl+0xc6/0xf8 [<000000016942cd9c>] print_address_description.constprop.0+0x34/0x2a0 [<000000016942d118>] print_report+0x110/0x1f8 [<0000000167a7bd04>] kasan_report+0xfc/0x128 [<000000016938d79a>] qeth_l2_br2dev_worker+0x5ba/0x6b0 [<00000001673edd1e>] process_one_work+0x76e/0x1128 [<00000001673ee85c>] worker_thread+0x184/0x1098 [<000000016740718a>] kthread+0x26a/0x310 [<00000001672c606a>] __ret_from_fork+0x8a/0xe8 [<00000001694711da>] ret_from_fork+0xa/0x40 Allocated by task 108338: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 __kasan_kmalloc+0xa0/0xc0 qeth_l2_switchdev_event+0x25a/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Freed by task 540: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 kasan_save_free_info+0x4c/0x68 ____kasan_slab_free+0x14e/0x1a8 __kasan_slab_free+0x24/0x30 __kmem_cache_free+0x168/0x338 qeth_l2_br2dev_worker+0x154/0x6b0 process_one_work+0x76e/0x1128 worker_thread+0x184/0x1098 kthread+0x26a/0x310 __ret_from_fork+0x8a/0xe8 ret_from_fork+0xa/0x40 Last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 insert_work+0x56/0x2e8 __queue_work+0x4ce/0xd10 queue_work_on+0xf4/0x100 qeth_l2_switchdev_event+0x520/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Second to last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 kvfree_call_rcu+0xb2/0x760 kernfs_unlink_open_file+0x348/0x430 kernfs_fop_release+0xc2/0x320 __fput+0x1ae/0x768 task_work_run+0x1bc/0x298 exit_to_user_mode_prepare+0x1a0/0x1a8 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 The buggy address belongs to the object at 00000000fdcea400 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 64 bytes inside of 96-byte region [00000000fdcea400, 00000000fdcea460) The buggy address belongs to the physical page: page:000000005a9c26e8 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xfdcea flags: 0x3ffff00000000200(slab|node=0|zone=1|lastcpupid=0x1ffff) raw: 3ffff00000000200 0000000000000000 0000000100000122 000000008008cc00 raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 00000000fdcea300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc 00000000fdcea380: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc >00000000fdcea400: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ 00000000fdcea480: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc 00000000fdcea500: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ================================================================== Fixes: f7936b7b2663 ("s390/qeth: Update MACs of LEARNING_SYNC device") Reported-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com> Link: https://lore.kernel.org/r/20221207105304.20494-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 December 2022, 17:12:56 UTC
3809902 macsec: add missing attribute validation for offload Add missing attribute validation for IFLA_MACSEC_OFFLOAD to the netlink policy. Fixes: 791bb3fcafce ("net: macsec: add support for specifying offload upon link creation") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/20221207101618.989-1-ehakim@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 December 2022, 17:12:18 UTC
cdd9738 net: mvneta: Fix an out of bounds check In an earlier commit, I added a bounds check to prevent an out of bounds read and a WARN(). On further discussion and consideration that check was probably too aggressive. Instead of returning -EINVAL, a better fix would be to just prevent the out of bounds read but continue the process. Background: The value of "pp->rxq_def" is a number between 0-7 by default, or even higher depending on the value of "rxq_number", which is a module parameter. If the value is more than the number of available CPUs then it will trigger the WARN() in cpu_max_bits_warn(). Fixes: e8b4fc13900b ("net: mvneta: Prevent out of bounds read in mvneta_config_rss()") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/Y5A7d1E5ccwHTYPf@kadam Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 December 2022, 17:09:36 UTC
ed14e59 net: thunderbolt: fix memory leak in tbnet_open() When tb_ring_alloc_rx() failed in tbnet_open(), ida that allocated in tb_xdomain_alloc_out_hopid() is not released. Add tb_xdomain_release_out_hopid() to the error path to release ida. Fixes: 180b0689425c ("thunderbolt: Allow multiple DMA tunnels over a single XDomain connection") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20221207015001.1755826-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 December 2022, 17:07:37 UTC
ef19964 Revert "ARM: dts: imx7: Fix NAND controller size-cells" This reverts commit 753395ea1e45c724150070b5785900b6a44bd5fb. It introduced a boot regression on colibri-imx7, and potentially any other i.MX7 boards with MTD partition list generated into the fdt by U-Boot. While the commit we are reverting here is not obviously wrong, it fixes only a dt binding checker warning that is non-functional, while it introduces a boot regression and there is no obvious fix ready. Fixes: 753395ea1e45 ("ARM: dts: imx7: Fix NAND controller size-cells") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Marek Vasut <marex@denx.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/Y4dgBTGNWpM6SQXI@francesco-nb.int.toradex.com/ Link: https://lore.kernel.org/all/20221205144917.6514168a@xps-13/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> 08 December 2022, 16:47:57 UTC
1385313 docs/zh_CN: Add LoongArch booting description's translation Translate ../loongarch/booting.rst into Chinese. Suggested-by: Xiaotian Wu <wuxiaotian@loongson.cn> Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 08 December 2022, 07:03:14 UTC
38eb496 docs/LoongArch: Add booting description 1, Describe the information passed from BootLoader to kernel. 2, Describe the meaning and values of the kernel image header field. Suggested-by: Xiaotian Wu <wuxiaotian@loongson.cn> Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 08 December 2022, 06:59:15 UTC
b681604 LoongArch: mm: Fix huge page entry update for virtual machine In virtual machine (guest mode), the tlbwr instruction can not write the last entry of MTLB, so we need to make it non-present by invtlb and then write it by tlbfill. This also simplify the whole logic. Signed-off-by: Rui Wang <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 08 December 2022, 06:59:15 UTC
143d64b LoongArch: Export symbol for function smp_send_reschedule() Function smp_send_reschedule() is standard kernel API, which is defined in header file include/linux/smp.h. However, on LoongArch it is defined as an inline function, this is confusing and kernel modules can not use this function. Now we define smp_send_reschedule() as a general function, and add a EXPORT_SYMBOL_GPL on this function, so that kernel modules can use it. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 08 December 2022, 06:59:15 UTC
803e848 ipv6: avoid use-after-free in ip6_fragment() Blamed commit claimed rcu_read_lock() was held by ip6_fragment() callers. It seems to not be always true, at least for UDP stack. syzbot reported: BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:245 [inline] BUG: KASAN: use-after-free in ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951 Read of size 8 at addr ffff88801d403e80 by task syz-executor.3/7618 CPU: 1 PID: 7618 Comm: syz-executor.3 Not tainted 6.1.0-rc6-syzkaller-00012-g4312098baf37 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x15e/0x45d mm/kasan/report.c:395 kasan_report+0xbf/0x1f0 mm/kasan/report.c:495 ip6_dst_idev include/net/ip6_fib.h:245 [inline] ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951 __ip6_finish_output net/ipv6/ip6_output.c:193 [inline] ip6_finish_output+0x9a3/0x1170 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:445 [inline] ip6_local_out+0xb3/0x1a0 net/ipv6/output_core.c:161 ip6_send_skb+0xbb/0x340 net/ipv6/ip6_output.c:1966 udp_v6_send_skb+0x82a/0x18a0 net/ipv6/udp.c:1286 udp_v6_push_pending_frames+0x140/0x200 net/ipv6/udp.c:1313 udpv6_sendmsg+0x18da/0x2c80 net/ipv6/udp.c:1606 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 sock_write_iter+0x295/0x3d0 net/socket.c:1108 call_write_iter include/linux/fs.h:2191 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9ed/0xdd0 fs/read_write.c:584 ksys_write+0x1ec/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fde3588c0d9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fde365b6168 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fde359ac050 RCX: 00007fde3588c0d9 RDX: 000000000000ffdc RSI: 00000000200000c0 RDI: 000000000000000a RBP: 00007fde358e7ae9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fde35acfb1f R14: 00007fde365b6300 R15: 0000000000022000 </TASK> Allocated by task 7618: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x82/0x90 mm/kasan/common.c:325 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3398 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc+0x2b4/0x3d0 mm/slub.c:3422 dst_alloc+0x14a/0x1f0 net/core/dst.c:92 ip6_dst_alloc+0x32/0xa0 net/ipv6/route.c:344 ip6_rt_pcpu_alloc net/ipv6/route.c:1369 [inline] rt6_make_pcpu_route net/ipv6/route.c:1417 [inline] ip6_pol_route+0x901/0x1190 net/ipv6/route.c:2254 pol_lookup_func include/net/ip6_fib.h:582 [inline] fib6_rule_lookup+0x52e/0x6f0 net/ipv6/fib6_rules.c:121 ip6_route_output_flags_noref+0x2e6/0x380 net/ipv6/route.c:2625 ip6_route_output_flags+0x76/0x320 net/ipv6/route.c:2638 ip6_route_output include/net/ip6_route.h:98 [inline] ip6_dst_lookup_tail+0x5ab/0x1620 net/ipv6/ip6_output.c:1092 ip6_dst_lookup_flow+0x90/0x1d0 net/ipv6/ip6_output.c:1222 ip6_sk_dst_lookup_flow+0x553/0x980 net/ipv6/ip6_output.c:1260 udpv6_sendmsg+0x151d/0x2c80 net/ipv6/udp.c:1554 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 __sys_sendto+0x23a/0x340 net/socket.c:2117 __do_sys_sendto net/socket.c:2129 [inline] __se_sys_sendto net/socket.c:2125 [inline] __x64_sys_sendto+0xe1/0x1b0 net/socket.c:2125 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 7599: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2e/0x40 mm/kasan/generic.c:511 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x160/0x1c0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1724 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1750 slab_free mm/slub.c:3661 [inline] kmem_cache_free+0xee/0x5c0 mm/slub.c:3683 dst_destroy+0x2ea/0x400 net/core/dst.c:127 rcu_do_batch kernel/rcu/tree.c:2250 [inline] rcu_core+0x81f/0x1980 kernel/rcu/tree.c:2510 __do_softirq+0x1fb/0xadc kernel/softirq.c:571 Last potentially related work creation: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xbc/0xd0 mm/kasan/generic.c:481 call_rcu+0x9d/0x820 kernel/rcu/tree.c:2798 dst_release net/core/dst.c:177 [inline] dst_release+0x7d/0xe0 net/core/dst.c:167 refdst_drop include/net/dst.h:256 [inline] skb_dst_drop include/net/dst.h:268 [inline] skb_release_head_state+0x250/0x2a0 net/core/skbuff.c:838 skb_release_all net/core/skbuff.c:852 [inline] __kfree_skb net/core/skbuff.c:868 [inline] kfree_skb_reason+0x151/0x4b0 net/core/skbuff.c:891 kfree_skb_list_reason+0x4b/0x70 net/core/skbuff.c:901 kfree_skb_list include/linux/skbuff.h:1227 [inline] ip6_fragment+0x2026/0x2770 net/ipv6/ip6_output.c:949 __ip6_finish_output net/ipv6/ip6_output.c:193 [inline] ip6_finish_output+0x9a3/0x1170 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:445 [inline] ip6_local_out+0xb3/0x1a0 net/ipv6/output_core.c:161 ip6_send_skb+0xbb/0x340 net/ipv6/ip6_output.c:1966 udp_v6_send_skb+0x82a/0x18a0 net/ipv6/udp.c:1286 udp_v6_push_pending_frames+0x140/0x200 net/ipv6/udp.c:1313 udpv6_sendmsg+0x18da/0x2c80 net/ipv6/udp.c:1606 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 sock_write_iter+0x295/0x3d0 net/socket.c:1108 call_write_iter include/linux/fs.h:2191 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9ed/0xdd0 fs/read_write.c:584 ksys_write+0x1ec/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Second to last potentially related work creation: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xbc/0xd0 mm/kasan/generic.c:481 call_rcu+0x9d/0x820 kernel/rcu/tree.c:2798 dst_release net/core/dst.c:177 [inline] dst_release+0x7d/0xe0 net/core/dst.c:167 refdst_drop include/net/dst.h:256 [inline] skb_dst_drop include/net/dst.h:268 [inline] __dev_queue_xmit+0x1b9d/0x3ba0 net/core/dev.c:4211 dev_queue_xmit include/linux/netdevice.h:3008 [inline] neigh_resolve_output net/core/neighbour.c:1552 [inline] neigh_resolve_output+0x51b/0x840 net/core/neighbour.c:1532 neigh_output include/net/neighbour.h:546 [inline] ip6_finish_output2+0x56c/0x1530 net/ipv6/ip6_output.c:134 __ip6_finish_output net/ipv6/ip6_output.c:195 [inline] ip6_finish_output+0x694/0x1170 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:445 [inline] NF_HOOK include/linux/netfilter.h:302 [inline] NF_HOOK include/linux/netfilter.h:296 [inline] mld_sendpack+0xa09/0xe70 net/ipv6/mcast.c:1820 mld_send_cr net/ipv6/mcast.c:2121 [inline] mld_ifc_work+0x720/0xdc0 net/ipv6/mcast.c:2653 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 The buggy address belongs to the object at ffff88801d403dc0 which belongs to the cache ip6_dst_cache of size 240 The buggy address is located 192 bytes inside of 240-byte region [ffff88801d403dc0, ffff88801d403eb0) The buggy address belongs to the physical page: page:ffffea00007500c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d403 memcg:ffff888022f49c81 flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000200 ffffea0001ef6580 dead000000000002 ffff88814addf640 raw: 0000000000000000 00000000800c000c 00000001ffffffff ffff888022f49c81 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_HARDWALL), pid 3719, tgid 3719 (kworker/0:6), ts 136223432244, free_ts 136222971441 prep_new_page mm/page_alloc.c:2539 [inline] get_page_from_freelist+0x10b5/0x2d50 mm/page_alloc.c:4288 __alloc_pages+0x1cb/0x5b0 mm/page_alloc.c:5555 alloc_pages+0x1aa/0x270 mm/mempolicy.c:2285 alloc_slab_page mm/slub.c:1794 [inline] allocate_slab+0x213/0x300 mm/slub.c:1939 new_slab mm/slub.c:1992 [inline] ___slab_alloc+0xa91/0x1400 mm/slub.c:3180 __slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3279 slab_alloc_node mm/slub.c:3364 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc+0x31a/0x3d0 mm/slub.c:3422 dst_alloc+0x14a/0x1f0 net/core/dst.c:92 ip6_dst_alloc+0x32/0xa0 net/ipv6/route.c:344 icmp6_dst_alloc+0x71/0x680 net/ipv6/route.c:3261 mld_sendpack+0x5de/0xe70 net/ipv6/mcast.c:1809 mld_send_cr net/ipv6/mcast.c:2121 [inline] mld_ifc_work+0x720/0xdc0 net/ipv6/mcast.c:2653 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1459 [inline] free_pcp_prepare+0x65c/0xd90 mm/page_alloc.c:1509 free_unref_page_prepare mm/page_alloc.c:3387 [inline] free_unref_page+0x1d/0x4d0 mm/page_alloc.c:3483 __unfreeze_partials+0x17c/0x1a0 mm/slub.c:2586 qlink_free mm/kasan/quarantine.c:168 [inline] qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187 kasan_quarantine_reduce+0x184/0x210 mm/kasan/quarantine.c:294 __kasan_slab_alloc+0x66/0x90 mm/kasan/common.c:302 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3398 [inline] kmem_cache_alloc_node+0x304/0x410 mm/slub.c:3443 __alloc_skb+0x214/0x300 net/core/skbuff.c:497 alloc_skb include/linux/skbuff.h:1267 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1191 [inline] netlink_sendmsg+0x9a6/0xe10 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 __sys_sendto+0x23a/0x340 net/socket.c:2117 __do_sys_sendto net/socket.c:2129 [inline] __se_sys_sendto net/socket.c:2125 [inline] __x64_sys_sendto+0xe1/0x1b0 net/socket.c:2125 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 1758fd4688eb ("ipv6: remove unnecessary dst_hold() in ip6_fragment()") Reported-by: syzbot+8c0ac31aa9681abb9e2d@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/r/20221206101351.2037285-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 December 2022, 04:14:35 UTC
7d8c19b net: plip: don't call kfree_skb/dev_kfree_skb() under spin_lock_irq() It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb/dev_kfree_skb() with dev_kfree_skb_irq() and dev_consume_skb_irq() under spin_lock_irq(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20221207015310.2984909-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 December 2022, 04:10:47 UTC
5f4d487 net: phy: mxl-gpy: add MDINT workaround At least the GPY215B and GPY215C has a bug where it is still driving the interrupt line (MDINT) even after the interrupt status register is read and its bits are cleared. This will cause an interrupt storm. Although the MDINT is multiplexed with a GPIO pin and theoretically we could switch the pinmux to GPIO input mode, this isn't possible because the access to this register will stall exactly as long as the interrupt line is asserted. We exploit this very fact and just read a random internal register in our interrupt handler. This way, it will be delayed until the external interrupt line is released and an interrupt storm is avoided. The internal register access via the mailbox was deduced by looking at the downstream PHY API because the datasheet doesn't mention any of this. Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221205200453.3447866-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 December 2022, 04:04:11 UTC
65e349f Merge tag 'linux-can-fixes-for-6.1-20221207' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-12-07 The 1st patch is by Oliver Hartkopp and fixes a potential NULL pointer deref found by syzbot in the AF_CAN protocol. The next 2 patches are by Jiri Slaby and Max Staudt and add the missing flush_work() before freeing the underlying memory in the slcan and can327 driver. The last patch is by Frank Jungclaus and target the esd_usb driver and fixes the CAN error counters, allowing them to return to zero. * tag 'linux-can-fixes-for-6.1-20221207' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: esd_usb: Allow REC and TEC to return to zero can: can327: flush TX_work on ldisc .close() can: slcan: fix freed work crash can: af_can: fix NULL pointer dereference in can_rcv_filter ==================== Link: https://lore.kernel.org/r/20221207105243.2483884-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 December 2022, 02:57:54 UTC
479174d Merge tag 'platform-drivers-x86-v6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fix from Hans de Goede: "A single fix for 6.1 for suspend/resume issues on some AMD systems" * tag 'platform-drivers-x86-v6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/amd: pmc: Add a workaround for an s0i3 issue on Cezanne 07 December 2022, 20:37:35 UTC
b5b52de fscache: Fix oops due to race with cookie_lru and use_cookie If a cookie expires from the LRU and the LRU_DISCARD flag is set, but the state machine has not run yet, it's possible another thread can call fscache_use_cookie and begin to use it. When the cookie_worker finally runs, it will see the LRU_DISCARD flag set, transition the cookie->state to LRU_DISCARDING, which will then withdraw the cookie. Once the cookie is withdrawn the object is removed the below oops will occur because the object associated with the cookie is now NULL. Fix the oops by clearing the LRU_DISCARD bit if another thread uses the cookie before the cookie_worker runs. BUG: kernel NULL pointer dereference, address: 0000000000000008 ... CPU: 31 PID: 44773 Comm: kworker/u130:1 Tainted: G E 6.0.0-5.dneg.x86_64 #1 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Workqueue: events_unbound netfs_rreq_write_to_cache_work [netfs] RIP: 0010:cachefiles_prepare_write+0x28/0x90 [cachefiles] ... Call Trace: netfs_rreq_write_to_cache_work+0x11c/0x320 [netfs] process_one_work+0x217/0x3e0 worker_thread+0x4a/0x3b0 kthread+0xd6/0x100 Fixes: 12bb21a29c19 ("fscache: Implement cookie user counting and resource pinning") Reported-by: Daire Byrne <daire.byrne@gmail.com> Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Daire Byrne <daire@dneg.com> Link: https://lore.kernel.org/r/20221117115023.1350181-1-dwysocha@redhat.com/ # v1 Link: https://lore.kernel.org/r/20221117142915.1366990-1-dwysocha@redhat.com/ # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 December 2022, 19:49:18 UTC
098e5ed media: videobuf2-core: take mmap_lock in vb2_get_unmapped_area() While vb2_mmap took the mmap_lock mutex, vb2_get_unmapped_area didn't. Add this. Also take this opportunity to move the 'q->memory != VB2_MEMORY_MMAP' check and vb2_fileio_is_active() check into __find_plane_by_offset() so both vb2_mmap and vb2_get_unmapped_area do the same checks. Since q->memory is checked while mmap_lock is held, also take that lock in reqbufs and create_bufs when it is set, and set it back to MEMORY_UNKNOWN on error. Fixes: f035eb4e976e ("[media] videobuf2: fix lockdep warning") Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 December 2022, 19:25:40 UTC
aeffc8f drm/amd/display: fix array index out of bound error in DCN32 DML [Why&How] LinkCapacitySupport array is indexed with the number of voltage states and not the number of max DPPs. Fix the error by changing the array declaration to use the correct (larger) array size of total number of voltage states. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x 07 December 2022, 17:21:53 UTC
bc21fe9 drm/amdgpu/sdma_v4_0: turn off SDMA ring buffer in the s2idle suspend In the SDMA s0ix save process requires to turn off SDMA ring buffer for avoiding the SDMA in-flight request, otherwise will suffer from SDMA page fault which causes by page request from in-flight SDMA ring accessing at SDMA restore phase. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2248 Cc: stable@vger.kernel.org # 6.0,5.15+ Fixes: f8f4e2a51834 ("drm/amdgpu: skipping SDMA hw_init and hw_fini for S0ix.") Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 December 2022, 17:17:09 UTC
e18a9c1 Merge tag 'nvme-6.1-2022-12-07' of git://git.infradead.org/nvme into block-6.1 Pull NVMe fix from Christoph: "nvme fixes for Linux 6.1 - initialize core quirks before calling nvme_init_subsystem (Pankaj Raghav)" * tag 'nvme-6.1-2022-12-07' of git://git.infradead.org/nvme: nvme initialize core quirks before calling nvme_init_subsystem 07 December 2022, 15:55:27 UTC
87a3988 net: dsa: mv88e6xxx: accept phy-mode = "internal" for internal PHY ports The ethernet-controller dt-schema, mostly pushed forward by Linux, has the "internal" PHY mode for denoting MAC connections to an internal PHY. U-Boot may provide device tree blobs where this phy-mode is specified, so make the Linux driver accept them. It appears that the current behavior with phy-mode = "internal" was introduced when mv88e6xxx started reporting supported_interfaces to phylink. Prior to that, I don't think it would have any issues accepting this phy-mode. Fixes: d4ebf12bcec4 ("net: dsa: mv88e6xxx: populate supported_interfaces and mac_capabilities") Link: https://lore.kernel.org/linux-arm-kernel/20221205172709.kglithpbhdbsakvd@skbuf/T/ Reported-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Tim Harvey <tharvey@gateworks.com> # imx6q-gw904.dts Link: https://lore.kernel.org/r/20221205194845.2131161-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 07 December 2022, 15:08:06 UTC
7dfa764 xen/netback: fix build warning Commit ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area") introduced a (valid) build warning. There have even been reports of this problem breaking networking of Xen guests. Fixes: ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com> Tested-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Juergen Gross <jgross@suse.com> 07 December 2022, 15:03:21 UTC
9e62465 xen/netback: don't call kfree_skb() under spin_lock_irqsave() It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: be81992f9086 ("xen/netback: don't queue unlimited number of packages") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/20221205141333.3974565-1-yangyingliang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 07 December 2022, 15:00:33 UTC
e467848 platform/x86/amd: pmc: Add a workaround for an s0i3 issue on Cezanne Cezanne platforms under the right circumstances have a synchronization problem where attempting to enter s2idle may fail if the x86 cores are put into HLT before hardware resume from the previous attempt has completed. To avoid this issue add a 10-20ms delay before entering s2idle another time. This workaround will only be applied on interrupts that wake the hardware but don't break the s2idle loop. Cc: stable@vger.kernel.org # 6.1 Cc: "Mahapatra, Rajib" <Rajib.Mahapatra@amd.com> Cc: "Raul Rangel" <rrangel@chromium.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20221116154341.13382-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 07 December 2022, 14:27:49 UTC
73a0b6e ARM: 9278/1: kfence: only handle translation faults This is a similar fixup like arm64 does, only handle translation faults in case of unexpected kfence report when alignment faults on ARM, see more from commit 0bb1fbffc631 ("arm64: mm: kfence: only handle translation faults"). Fixes: 75969686ec0d ("ARM: 9166/1: Support KFENCE for ARM") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> 07 December 2022, 14:08:09 UTC
998b30c io_uring: Fix a null-ptr-deref in io_tctx_exit_cb() Syzkaller reports a NULL deref bug as follows: BUG: KASAN: null-ptr-deref in io_tctx_exit_cb+0x53/0xd3 Read of size 4 at addr 0000000000000138 by task file1/1955 CPU: 1 PID: 1955 Comm: file1 Not tainted 6.1.0-rc7-00103-gef4d3ea40565 #75 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 ? io_tctx_exit_cb+0x53/0xd3 kasan_report+0xbb/0x1f0 ? io_tctx_exit_cb+0x53/0xd3 kasan_check_range+0x140/0x190 io_tctx_exit_cb+0x53/0xd3 task_work_run+0x164/0x250 ? task_work_cancel+0x30/0x30 get_signal+0x1c3/0x2440 ? lock_downgrade+0x6e0/0x6e0 ? lock_downgrade+0x6e0/0x6e0 ? exit_signals+0x8b0/0x8b0 ? do_raw_read_unlock+0x3b/0x70 ? do_raw_spin_unlock+0x50/0x230 arch_do_signal_or_restart+0x82/0x2470 ? kmem_cache_free+0x260/0x4b0 ? putname+0xfe/0x140 ? get_sigframe_size+0x10/0x10 ? do_execveat_common.isra.0+0x226/0x710 ? lockdep_hardirqs_on+0x79/0x100 ? putname+0xfe/0x140 ? do_execveat_common.isra.0+0x238/0x710 exit_to_user_mode_prepare+0x15f/0x250 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x42/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0023:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 002b:00000000fffb7790 EFLAGS: 00000200 ORIG_RAX: 000000000000000b RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Kernel panic - not syncing: panic_on_warn set ... This happens because the adding of task_work from io_ring_exit_work() isn't synchronized with canceling all work items from eg exec. The execution of the two are ordered in that they are both run by the task itself, but if io_tctx_exit_cb() is queued while we're canceling all work items off exec AND gets executed when the task exits to userspace rather than in the main loop in io_uring_cancel_generic(), then we can find current->io_uring == NULL and hit the above crash. It's safe to add this NULL check here, because the execution of the two paths are done by the task itself. Cc: stable@vger.kernel.org Fixes: d56d938b4bef ("io_uring: do ctx initiated file note removal") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20221206093833.3812138-1-harshit.m.mogalapalli@oracle.com [axboe: add code comment and also put an explanation in the commit msg] Signed-off-by: Jens Axboe <axboe@kernel.dk> 07 December 2022, 13:45:20 UTC
92439a8 Merge tag 'ieee802154-for-net-2022-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2022-12-05 An update from ieee802154 for your *net* tree: Three small fixes this time around. Ziyang Xuan fixed an error code for a timeout during initialization of the cc2520 driver. Hauke Mehrtens fixed a crash in the ca8210 driver SPI communication due uninitialized SPI structures. Wei Yongjun added INIT_LIST_HEAD ieee802154_if_add() to avoid a potential null pointer dereference. ==================== Link: https://lore.kernel.org/r/20221205122515.1720539-1-stefan@datenfreihafen.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> 07 December 2022, 12:50:16 UTC
4fad22a dpaa2-switch: Fix memory leak in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove() The cmd_buff needs to be freed when error happened in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove(). Fixes: 1110318d83e8 ("dpaa2-switch: add tc flower hardware offload on ingress traffic") Signed-off-by: Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20221205061515.115012-1-yuancan@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 07 December 2022, 11:14:12 UTC
063a932 ethernet: aeroflex: fix potential skb leak in greth_init_rings() The greth_init_rings() function won't free the newly allocated skb when dma_mapping_error() returns error, so add dev_kfree_skb() to fix it. Compile tested only. Fixes: d4c41139df6e ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/1670134149-29516-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 07 December 2022, 10:45:52 UTC
8895617 tipc: call tipc_lxc_xmit without holding node_read_lock When sending packets between nodes in netns, it calls tipc_lxc_xmit() for peer node to receive the packets where tipc_sk_mcast_rcv()/tipc_sk_rcv() might be called, and it's pretty much like in tipc_rcv(). Currently the local 'node rw lock' is held during calling tipc_lxc_xmit() to protect the peer_net not being freed by another thread. However, when receiving these packets, tipc_node_add_conn() might be called where the peer 'node rw lock' is acquired. Then a dead lock warning is triggered by lockdep detector, although it is not a real dead lock: WARNING: possible recursive locking detected -------------------------------------------- conn_server/1086 is trying to acquire lock: ffff8880065cb020 (&n->lock#2){++--}-{2:2}, \ at: tipc_node_add_conn.cold.76+0xaa/0x211 [tipc] but task is already holding lock: ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \ at: tipc_node_xmit+0x285/0xb30 [tipc] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&n->lock#2); lock(&n->lock#2); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by conn_server/1086: #0: ffff8880036d1e40 (sk_lock-AF_TIPC){+.+.}-{0:0}, \ at: tipc_accept+0x9c0/0x10b0 [tipc] #1: ffff8880036d5f80 (sk_lock-AF_TIPC/1){+.+.}-{0:0}, \ at: tipc_accept+0x363/0x10b0 [tipc] #2: ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \ at: tipc_node_xmit+0x285/0xb30 [tipc] #3: ffff888012e13370 (slock-AF_TIPC){+...}-{2:2}, \ at: tipc_sk_rcv+0x2da/0x1b40 [tipc] Call Trace: <TASK> dump_stack_lvl+0x44/0x5b __lock_acquire.cold.77+0x1f2/0x3d7 lock_acquire+0x1d2/0x610 _raw_write_lock_bh+0x38/0x80 tipc_node_add_conn.cold.76+0xaa/0x211 [tipc] tipc_sk_finish_conn+0x21e/0x640 [tipc] tipc_sk_filter_rcv+0x147b/0x3030 [tipc] tipc_sk_rcv+0xbb4/0x1b40 [tipc] tipc_lxc_xmit+0x225/0x26b [tipc] tipc_node_xmit.cold.82+0x4a/0x102 [tipc] __tipc_sendstream+0x879/0xff0 [tipc] tipc_accept+0x966/0x10b0 [tipc] do_accept+0x37d/0x590 This patch avoids this warning by not holding the 'node rw lock' before calling tipc_lxc_xmit(). As to protect the 'peer_net', rcu_read_lock() should be enough, as in cleanup_net() when freeing the netns, it calls synchronize_rcu() before the free is continued. Also since tipc_lxc_xmit() is like the RX path in tipc_rcv(), it makes sense to call it under rcu_read_lock(). Note that the right lock order must be: rcu_read_lock(); tipc_node_read_lock(n); tipc_node_read_unlock(n); tipc_lxc_xmit(); rcu_read_unlock(); instead of: tipc_node_read_lock(n); rcu_read_lock(); tipc_node_read_unlock(n); tipc_lxc_xmit(); rcu_read_unlock(); and we have to call tipc_node_read_lock/unlock() twice in tipc_node_xmit(). Fixes: f73b12812a3d ("tipc: improve throughput between nodes in netns") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/5bdd1f8fee9db695cfff4528a48c9b9d0523fb00.1670110641.git.lucien.xin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 07 December 2022, 10:32:04 UTC
918ee49 can: esd_usb: Allow REC and TEC to return to zero We don't get any further EVENT from an esd CAN USB device for changes on REC or TEC while those counters converge to 0 (with ecc == 0). So when handling the "Back to Error Active"-event force txerr = rxerr = 0, otherwise the berr-counters might stay on values like 95 forever. Also, to make life easier during the ongoing development a netdev_dbg() has been introduced to allow dumping error events send by an esd CAN USB device. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu> Link: https://lore.kernel.org/all/20221130202242.3998219-2-frank.jungclaus@esd.eu Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 07 December 2022, 09:32:48 UTC
f4a4d12 can: can327: flush TX_work on ldisc .close() Additionally, remove it from .ndo_stop(). This ensures that the worker is not called after being freed, and that the UART TX queue remains active to send final commands when the netdev is stopped. Thanks to Jiri Slaby for finding this in slcan: https://lore.kernel.org/linux-can/20221201073426.17328-1-jirislaby@kernel.org/ A variant of this patch for slcan, with the flush in .ndo_stop() still present, has been tested successfully on physical hardware: https://bugzilla.suse.com/show_bug.cgi?id=1205597 Fixes: 43da2f07622f ("can: can327: CAN/ldisc driver for ELM327 based OBD-II adapters") Cc: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Max Staudt <max@enpas.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-can@vger.kernel.org Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Max Staudt <max@enpas.org> Link: https://lore.kernel.org/all/20221202160148.282564-1-max@enpas.org Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 07 December 2022, 09:32:36 UTC
fb855e9 can: slcan: fix freed work crash The LTP test pty03 is causing a crash in slcan: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 348 Comm: kworker/0:3 Not tainted 6.0.8-1-default #1 openSUSE Tumbleweed 9d20364b934f5aab0a9bdf84e8f45cfdfae39dab Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 Workqueue: 0x0 (events) RIP: 0010:process_one_work (/home/rich/kernel/linux/kernel/workqueue.c:706 /home/rich/kernel/linux/kernel/workqueue.c:2185) Code: 49 89 ff 41 56 41 55 41 54 55 53 48 89 f3 48 83 ec 10 48 8b 06 48 8b 6f 48 49 89 c4 45 30 e4 a8 04 b8 00 00 00 00 4c 0f 44 e0 <49> 8b 44 24 08 44 8b a8 00 01 00 00 41 83 e5 20 f6 45 10 04 75 0e RSP: 0018:ffffaf7b40f47e98 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff9d644e1b8b48 RCX: ffff9d649e439968 RDX: 00000000ffff8455 RSI: ffff9d644e1b8b48 RDI: ffff9d64764aa6c0 RBP: ffff9d649e4335c0 R08: 0000000000000c00 R09: ffff9d64764aa734 R10: 0000000000000007 R11: 0000000000000001 R12: 0000000000000000 R13: ffff9d649e4335e8 R14: ffff9d64490da780 R15: ffff9d64764aa6c0 FS: 0000000000000000(0000) GS:ffff9d649e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000036424000 CR4: 00000000000006f0 Call Trace: <TASK> worker_thread (/home/rich/kernel/linux/kernel/workqueue.c:2436) kthread (/home/rich/kernel/linux/kernel/kthread.c:376) ret_from_fork (/home/rich/kernel/linux/arch/x86/entry/entry_64.S:312) Apparently, the slcan's tx_work is freed while being scheduled. While slcan_netdev_close() (netdev side) calls flush_work(&sl->tx_work), slcan_close() (tty side) does not. So when the netdev is never set UP, but the tty is stuffed with bytes and forced to wakeup write, the work is scheduled, but never flushed. So add an additional flush_work() to slcan_close() to be sure the work is flushed under all circumstances. The Fixes commit below moved flush_work() from slcan_close() to slcan_netdev_close(). What was the rationale behind it? Maybe we can drop the one in slcan_netdev_close()? I see the same pattern in can327. So it perhaps needs the very same fix. Fixes: cfcb4465e992 ("can: slcan: remove legacy infrastructure") Link: https://bugzilla.suse.com/show_bug.cgi?id=1205597 Reported-by: Richard Palethorpe <richard.palethorpe@suse.com> Tested-by: Petr Vorel <petr.vorel@suse.com> Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-can@vger.kernel.org Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Cc: Max Staudt <max@enpas.org> Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Reviewed-by: Max Staudt <max@enpas.org> Link: https://lore.kernel.org/all/20221201073426.17328-1-jirislaby@kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 07 December 2022, 09:32:24 UTC
0acc442 can: af_can: fix NULL pointer dereference in can_rcv_filter Analogue to commit 8aa59e355949 ("can: af_can: fix NULL pointer dereference in can_rx_register()") we need to check for a missing initialization of ml_priv in the receive path of CAN frames. Since commit 4e096a18867a ("net: introduce CAN specific pointer in the struct net_device") the check for dev->type to be ARPHRD_CAN is not sufficient anymore since bonding or tun netdevices claim to be CAN devices but do not initialize ml_priv accordingly. Fixes: 4e096a18867a ("net: introduce CAN specific pointer in the struct net_device") Reported-by: syzbot+2d7f58292cb5b29eb5ad@syzkaller.appspotmail.com Reported-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20221206201259.3028-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 07 December 2022, 09:30:47 UTC
1799c1b Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-12-05 (i40e) Michal clears XPS init flag on reset to allow for updated values to be written. Sylwester adds sleep to VF reset to resolve issue of VFs not getting resources. Przemyslaw rejects filters for raw IPv4 or IPv6 l4_4_bytes filters as they are not supported. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Disallow ip4 and ip6 l4_4_bytes i40e: Fix for VF MAC address 0 i40e: Fix not setting default xps_cpus after reset ==================== Link: https://lore.kernel.org/r/20221205212523.3197565-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 07 December 2022, 04:46:33 UTC
78a9ea4 net: dsa: sja1105: fix memory leak in sja1105_setup_devlink_regions() When dsa_devlink_region_create failed in sja1105_setup_devlink_regions(), priv->regions is not released. Fixes: bf425b82059e ("net: dsa: sja1105: expose static config as devlink region") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221205012132.2110979-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 07 December 2022, 04:36:38 UTC
e40febf Merge branch 'ipv4-two-bug-fixes' Ido Schimmel says: ==================== ipv4: Two small fixes for bugs in IPv4 routing code. A variation of the second bug was reported by an FRR 5.0 (released 06/18) user as this version was setting a table ID of 0 for the default VRF, unlike iproute2 and newer FRR versions. The first bug was discovered while fixing the second. Both bugs are not regressions (never worked) and are not critical in my opinion, so the fixes can be applied to net-next, if desired. No regressions in other tests: # ./fib_tests.sh ... Tests passed: 191 Tests failed: 0 ==================== Link: https://lore.kernel.org/r/20221204075045.3780097-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 07 December 2022, 04:34:46 UTC
c0d9993 ipv4: Fix incorrect route flushing when table ID 0 is used Cited commit added the table ID to the FIB info structure, but did not properly initialize it when table ID 0 is used. This can lead to a route in the default VRF with a preferred source address not being flushed when the address is deleted. Consider the following example: # ip address add dev dummy1 192.0.2.1/28 # ip address add dev dummy1 192.0.2.17/28 # ip route add 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 100 # ip route add table 0 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 200 # ip route show 198.51.100.0/24 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 100 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200 Both routes are installed in the default VRF, but they are using two different FIB info structures. One with a metric of 100 and table ID of 254 (main) and one with a metric of 200 and table ID of 0. Therefore, when the preferred source address is deleted from the default VRF, the second route is not flushed: # ip address del dev dummy1 192.0.2.17/28 # ip route show 198.51.100.0/24 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200 Fix by storing a table ID of 254 instead of 0 in the route configuration structure. Add a test case that fails before the fix: # ./fib_tests.sh -t ipv4_del_addr IPv4 delete address route tests Regular FIB info TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Identical FIB info with different table ID TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Table ID 0 TEST: Route removed in default VRF when source address deleted [FAIL] Tests passed: 8 Tests failed: 1 And passes after: # ./fib_tests.sh -t ipv4_del_addr IPv4 delete address route tests Regular FIB info TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Identical FIB info with different table ID TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Table ID 0 TEST: Route removed in default VRF when source address deleted [ OK ] Tests passed: 9 Tests failed: 0 Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs") Reported-by: Donald Sharp <sharpd@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 07 December 2022, 04:34:43 UTC
f96a3d7 ipv4: Fix incorrect route flushing when source address is deleted Cited commit added the table ID to the FIB info structure, but did not prevent structures with different table IDs from being consolidated. This can lead to routes being flushed from a VRF when an address is deleted from a different VRF. Fix by taking the table ID into account when looking for a matching FIB info. This is already done for FIB info structures backed by a nexthop object in fib_find_info_nh(). Add test cases that fail before the fix: # ./fib_tests.sh -t ipv4_del_addr IPv4 delete address route tests Regular FIB info TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Identical FIB info with different table ID TEST: Route removed from VRF when source address deleted [FAIL] TEST: Route in default VRF not removed [ OK ] RTNETLINK answers: File exists TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [FAIL] Tests passed: 6 Tests failed: 2 And pass after: # ./fib_tests.sh -t ipv4_del_addr IPv4 delete address route tests Regular FIB info TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Identical FIB info with different table ID TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Tests passed: 8 Tests failed: 0 Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 07 December 2022, 04:34:43 UTC
7e63035 net: fec: properly guard irq coalesce setup Prior to the Fixes: commit, the initialization code went through the same fec_enet_set_coalesce() function as used by ethtool, and that function correctly checks whether the current variant has support for irq coalescing. Now that the initialization code instead calls fec_enet_itr_coal_set() directly, that call needs to be guarded by a check for the FEC_QUIRK_HAS_COALESCE bit. Fixes: df727d4547de (net: fec: don't reset irq coalesce settings to defaults on "ip link up") Reported-by: Greg Ungerer <gregungerer@westnet.com.au> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221205204604.869853-1-linux@rasmusvillemoes.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org> 07 December 2022, 04:22:34 UTC
1f154f3 bonding: get correct NA dest address In commit 4d633d1b468b ("bonding: fix ICMPv6 header handling when receiving IPv6 messages"), there is a copy/paste issue for NA daddr. I found that in my testing and fixed it in my local branch. But I forgot to re-format the patch and sent the wrong mail. Fix it by reading the correct dest address. Fixes: 4d633d1b468b ("bonding: fix ICMPv6 header handling when receiving IPv6 messages") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Link: https://lore.kernel.org/r/20221206032055.7517-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 07 December 2022, 04:20:38 UTC
d95d140 ata: libahci_platform: ahci_platform_find_clk: oops, NULL pointer When booting a arm 32-bit kernel with config CONFIG_AHCI_DWC enabled on a am57xx-evm board. This happens when the clock references are unnamed in DT, the strcmp() produces a NULL pointer dereference, see the following oops, NULL pointer dereference: [ 4.673950] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 4.682098] [00000000] *pgd=00000000 [ 4.685699] Internal error: Oops: 5 [#1] SMP ARM [ 4.690338] Modules linked in: [ 4.693420] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc7 #1 [ 4.699615] Hardware name: Generic DRA74X (Flattened Device Tree) [ 4.705749] PC is at strcmp+0x0/0x34 [ 4.709350] LR is at ahci_platform_find_clk+0x3c/0x5c [ 4.714416] pc : [<c130c494>] lr : [<c0c230e0>] psr: 20000013 [ 4.720703] sp : f000dda8 ip : 00000001 fp : c29b1840 [ 4.725952] r10: 00000020 r9 : c1b23380 r8 : c1b23368 [ 4.731201] r7 : c1ab4cc4 r6 : 00000001 r5 : c3c66040 r4 : 00000000 [ 4.737762] r3 : 00000080 r2 : 00000080 r1 : c1ab4cc4 r0 : 00000000 [...] [ 4.998870] strcmp from ahci_platform_find_clk+0x3c/0x5c [ 5.004302] ahci_platform_find_clk from ahci_dwc_probe+0x1f0/0x54c [ 5.010589] ahci_dwc_probe from platform_probe+0x64/0xc0 [ 5.016021] platform_probe from really_probe+0xe8/0x41c [ 5.021362] really_probe from __driver_probe_device+0xa4/0x204 [ 5.027313] __driver_probe_device from driver_probe_device+0x38/0xc8 [ 5.033782] driver_probe_device from __driver_attach+0xb4/0x1ec [ 5.039825] __driver_attach from bus_for_each_dev+0x78/0xb8 [ 5.045532] bus_for_each_dev from bus_add_driver+0x17c/0x220 [ 5.051300] bus_add_driver from driver_register+0x90/0x124 [ 5.056915] driver_register from do_one_initcall+0x48/0x1e8 [ 5.062591] do_one_initcall from kernel_init_freeable+0x1cc/0x234 [ 5.068817] kernel_init_freeable from kernel_init+0x20/0x13c [ 5.074584] kernel_init from ret_from_fork+0x14/0x2c [ 5.079681] Exception stack(0xf000dfb0 to 0xf000dff8) [ 5.084747] dfa0: 00000000 00000000 00000000 00000000 [ 5.092956] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 5.101165] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 5.107818] Code: e5e32001 e3520000 1afffffb e12fff1e (e4d03001) [ 5.114013] ---[ end trace 0000000000000000 ]--- Add an extra check in the if-statement if hpriv-clks[i].id. Fixes: 6ce73f3a6fc0 ("ata: libahci_platform: Add function returning a clock-handle by id") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> 06 December 2022, 23:36:37 UTC
8ed710d Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Revert the dropping of the cache invalidation from the arm64 arch_dma_prep_coherent() as it caused a regression in the qcom_q6v5_mss remoteproc driver. The driver is already buggy but the original arm64 change made the problem obvious. The change will be re-introduced once the driver is fixed" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()" 06 December 2022, 19:03:03 UTC
5b3e0cd Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "Unless anything comes from the ARM side, this should be the last pull request for this release - and it's mostly documentation: - Document the interaction between KVM_CAP_HALT_POLL and halt_poll_ns - s390: fix multi-epoch extension in nested guests - x86: fix uninitialized variable on nested triple fault" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Document the interaction between KVM_CAP_HALT_POLL and halt_poll_ns KVM: Move halt-polling documentation into common directory KVM: x86: fix uninitialized variable use on KVM_REQ_TRIPLE_FAULT KVM: s390: vsie: Fix the initialization of the epoch extension (epdx) field 06 December 2022, 18:49:19 UTC
b71101d Merge tag 'for-linus-xsa-6.1-rc9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Two zero-day fixes for the xen-netback driver (XSA-423 and XSA-424)" * tag 'for-linus-xsa-6.1-rc9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/netback: don't call kfree_skb() with interrupts disabled xen/netback: Ensure protocol headers don't fall in the non-linear area 06 December 2022, 18:19:05 UTC
b7d9aae Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()" This reverts commit c44094eee32f32f175aadc0efcac449d99b1bbf7. Although the semantics of the DMA API require only a clean operation here, it turns out that the Qualcomm 'qcom_q6v5_mss' remoteproc driver (ab)uses the DMA API for transferring the modem firmware to the secure world via calls to Trustzone [1]. Once the firmware buffer has changed hands, _any_ access from the non-secure side (i.e. Linux) will be detected on the bus and result in a full system reset [2]. Although this is possible even with this revert in place (due to speculative reads via the cacheable linear alias of memory), anecdotally the problem occurs considerably more frequently when the lines have not been invalidated, assumedly due to some micro-architectural interactions with the cache hierarchy. Revert the offending change for now, along with a comment, so that the Qualcomm developers have time to fix the driver [3] to use a firmware buffer which does not have a cacheable alias in the linear map. Link: https://lore.kernel.org/r/20221114110329.68413-1-manivannan.sadhasivam@linaro.org [1] Link: https://lore.kernel.org/r/CAMi1Hd3H2k1J8hJ6e-Miy5+nVDNzv6qQ3nN-9929B0GbHJkXEg@mail.gmail.com/ [2] Link: https://lore.kernel.org/r/20221206092152.GD15486@thinkpad [2] Reported-by: Amit Pundir <amit.pundir@linaro.org> Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Will Deacon <will@kernel.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20221206103403.646-1-will@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 06 December 2022, 17:30:39 UTC
74e7e1e xen/netback: don't call kfree_skb() with interrupts disabled It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So remove kfree_skb() from the spin_lock_irqsave() section and use the already existing "drop" label in xenvif_start_xmit() for dropping the SKB. At the same time replace the dev_kfree_skb() call there with a call of dev_kfree_skb_any(), as xenvif_start_xmit() can be called with disabled interrupts. This is XSA-424 / CVE-2022-42328 / CVE-2022-42329. Fixes: be81992f9086 ("xen/netback: don't queue unlimited number of packages") Reported-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> 06 December 2022, 15:00:33 UTC
ad7f402 xen/netback: Ensure protocol headers don't fall in the non-linear area In some cases, the frontend may send a packet where the protocol headers are spread across multiple slots. This would result in netback creating an skb where the protocol headers spill over into the non-linear area. Some drivers and NICs don't handle this properly resulting in an interface reset or worse. This issue was introduced by the removal of an unconditional skb pull in the tx path to improve performance. Fix this without reintroducing the pull by setting up grant copy ops for as many slots as needed to reach the XEN_NETBACK_TX_COPY_LEN size. Adjust the rest of the code to handle multiple copy operations per skb. This is XSA-423 / CVE-2022-3643. Fixes: 7e5d7753956b ("xen-netback: remove unconditional __pskb_pull_tail() in guest Tx path") Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: Juergen Gross <jgross@suse.com> 06 December 2022, 15:00:30 UTC
743117a tipc: Fix potential OOB in tipc_link_proto_rcv() Fix the potential risk of OOB if skb_linearize() fails in tipc_link_proto_rcv(). Fixes: 5cbb28a4bf65 ("tipc: linearize arriving NAME_DISTR and LINK_PROTO buffers") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20221203094635.29024-1-yuehaibing@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 06 December 2022, 11:58:38 UTC
433c07a net: hisilicon: Fix potential use-after-free in hix5hd2_rx() The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free. Fixes: 57c5bc9ad7d7 ("net: hisilicon: add hix5hd2 mac driver") Signed-off-by: Liu Jian <liujian56@huawei.com> Link: https://lore.kernel.org/r/20221203094240.1240211-2-liujian56@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 06 December 2022, 11:53:31 UTC
cb37617 net: mdio: fix unbalanced fwnode reference count in mdio_device_release() There is warning report about of_node refcount leak while probing mdio device: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/soc@0/mdio@710700c0/ethernet@4 In of_mdiobus_register_device(), we increase fwnode refcount by fwnode_handle_get() before associating the of_node with mdio device, but it has never been decreased in normal path. Since that, in mdio_device_release(), it needs to call fwnode_handle_put() in addition instead of calling kfree() directly. After above, just calling mdio_device_free() in the error handle path of of_mdiobus_register_device() is enough to keep the refcount balanced. Fixes: a9049e0c513c ("mdio: Add support for mdio drivers.") Signed-off-by: Zeng Heng <zengheng4@huawei.com> Reviewed-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20221203073441.3885317-1-zengheng4@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 06 December 2022, 11:50:00 UTC
4640177 net: hisilicon: Fix potential use-after-free in hisi_femac_rx() The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free. Fixes: 542ae60af24f ("net: hisilicon: Add Fast Ethernet MAC driver") Signed-off-by: Liu Jian <liujian56@huawei.com> Link: https://lore.kernel.org/r/20221203094240.1240211-1-liujian56@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 06 December 2022, 11:45:11 UTC
42330a3 net: thunderx: Fix missing destroy_workqueue of nicvf_rx_mode_wq The nicvf_probe() won't destroy workqueue when register_netdev() failed. Add destroy_workqueue err handle case to fix this issue. Fixes: 2ecbe4f4a027 ("net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to private for each of them.") Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20221203094125.602812-1-liuyongqiang13@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 06 December 2022, 11:41:46 UTC
5a5a3e5 ravb: Fix potential use-after-free in ravb_rx_gbeth() The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free. Fixes: 1c59eb678cbd ("ravb: Fillup ravb_rx_gbeth() stub") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20221203092941.10880-1-yuehaibing@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 06 December 2022, 11:37:25 UTC
7b8232b net: microchip: sparx5: Fix missing destroy_workqueue of mact_queue The mchp_sparx5_probe() won't destroy workqueue created by create_singlethread_workqueue() in sparx5_start() when later inits failed. Add destroy_workqueue in the cleanup_ports case, also add it in mchp_sparx5_remove() Fixes: b37a1bae742f ("net: sparx5: add mactable support") Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Link: https://lore.kernel.org/r/20221203070259.19560-1-linqiheng@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 06 December 2022, 10:50:49 UTC
ee49669 ip_gre: do not report erspan version on GRE interface Although the type I ERSPAN is based on the barebones IP + GRE encapsulation and no extra ERSPAN header. Report erspan version on GRE interface looks unreasonable. Fix this by separating the erspan and gre fill info. IPv6 GRE does not have this info as IPv6 only supports erspan version 1 and 2. Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: f989d546a2d5 ("erspan: Add type I version 0 support.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: William Tu <u9012063@gmail.com> Link: https://lore.kernel.org/r/20221203032858.3130339-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 06 December 2022, 10:45:55 UTC
23353ef net: wwan: iosm: fix memory leak in ipc_mux_init() When failed to alloc ipc_mux->ul_adb.pp_qlt in ipc_mux_init(), ipc_mux is not released. Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com> Link: https://lore.kernel.org/r/20221203020903.383235-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 06 December 2022, 10:39:35 UTC
18010ff net: mana: Fix race on per-CQ variable napi work_done After calling napi_complete_done(), the NAPIF_STATE_SCHED bit may be cleared, and another CPU can start napi thread and access per-CQ variable, cq->work_done. If the other thread (for example, from busy_poll) sets it to a value >= budget, this thread will continue to run when it should stop, and cause memory corruption and panic. To fix this issue, save the per-CQ work_done variable in a local variable before napi_complete_done(), so it won't be corrupted by a possible concurrent thread after napi_complete_done(). Also, add a flag bit to advertise to the NIC firmware: the NAPI work_done variable race is fixed, so the driver is able to reliably support features like busy_poll. Cc: stable@vger.kernel.org Fixes: e1b5683ff62e ("net: mana: Move NAPI from EQ to CQ") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://lore.kernel.org/r/1670010190-28595-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 06 December 2022, 10:21:34 UTC
61d4f14 net: stmmac: fix "snps,axi-config" node property parsing In dt-binding snps,dwmac.yaml, some properties under "snps,axi-config" node are named without "axi_" prefix, but the driver expects the prefix. Since the dt-binding has been there for a long time, we'd better make driver match the binding for compatibility. Fixes: afea03656add ("stmmac: rework DMA bus setting and introduce new platform AXI structure") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Link: https://lore.kernel.org/r/20221202161739.2203-1-jszhang@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> 06 December 2022, 09:23:24 UTC
63ff545 gpio/rockchip: fix refcount leak in rockchip_gpiolib_register() The node returned by of_get_parent() with refcount incremented, of_node_put() needs be called when finish using it. So add it in the end of of_pinctrl_get(). Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio") Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> 06 December 2022, 09:10:46 UTC
6f2d715 nvme initialize core quirks before calling nvme_init_subsystem A device might have a core quirk for NVME_QUIRK_IGNORE_DEV_SUBNQN (such as Samsung X5) but it would still give a: "missing or invalid SUBNQN field" warning as core quirks are filled after calling nvme_init_subnqn. Fill ctrl->quirks from struct core_quirks before calling nvme_init_subsystem to fix this. Tested on a Samsung X5. Fixes: ab9e00cc72fa ("nvme: track subsystems") Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de> 06 December 2022, 08:05:59 UTC
e329e71 NFC: nci: Bounds check struct nfc_target arrays While running under CONFIG_FORTIFY_SOURCE=y, syzkaller reported: memcpy: detected field-spanning write (size 129) of single field "target->sensf_res" at net/nfc/nci/ntf.c:260 (size 18) This appears to be a legitimate lack of bounds checking in nci_add_new_protocol(). Add the missing checks. Reported-by: syzbot+210e196cef4711b65139@syzkaller.appspotmail.com Link: https://lore.kernel.org/lkml/0000000000001c590f05ee7b3ff4@google.com Fixes: 019c4fbaa790 ("NFC: Add NCI multiple targets support") Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221202214410.never.693-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 06 December 2022, 01:46:25 UTC
bce9332 proc: proc_skip_spaces() shouldn't think it is working on C strings proc_skip_spaces() seems to think it is working on C strings, and ends up being just a wrapper around skip_spaces() with a really odd calling convention. Instead of basing it on skip_spaces(), it should have looked more like proc_skip_char(), which really is the exact same function (except it skips a particular character, rather than whitespace). So use that as inspiration, odd coding and all. Now the calling convention actually makes sense and works for the intended purpose. Reported-and-tested-by: Kyle Zeng <zengyhkyle@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 December 2022, 20:09:06 UTC
e6cfaf3 proc: avoid integer type confusion in get_proc_long proc_get_long() is passed a size_t, but then assigns it to an 'int' variable for the length. Let's not do that, even if our IO paths are limited to MAX_RW_COUNT (exactly because of these kinds of type errors). So do the proper test in the rigth type. Reported-by: Kyle Zeng <zengyhkyle@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 December 2022, 19:33:40 UTC
6e90293 drm/vmwgfx: Don't use screen objects when SEV is active When SEV is enabled gmr's and mob's are explicitly disabled because the encrypted system memory can not be used by the hypervisor. The driver was disabling GMR's but the presentation code, which depends on GMR's, wasn't honoring it which lead to black screen on hosts with SEV enabled. Make sure screen objects presentation is not used when guest memory regions have been disabled to fix presentation on SEV enabled hosts. Fixes: 3b0d6458c705 ("drm/vmwgfx: Refuse DMA operation when SEV encryption is active") Cc: <stable@vger.kernel.org> # v5.7+ Signed-off-by: Zack Rusin <zackr@vmware.com> Reported-by: Nicholas Hunt <nhunt@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221201175341.491884-1-zack@kde.org 05 December 2022, 18:59:38 UTC
b52be55 ipc/sem: Fix dangling sem_array access in semtimedop race When __do_semtimedop() goes to sleep because it has to wait for a semaphore value becoming zero or becoming bigger than some threshold, it links the on-stack sem_queue to the sem_array, then goes to sleep without holding a reference on the sem_array. When __do_semtimedop() comes back out of sleep, one of two things must happen: a) We prove that the on-stack sem_queue has been disconnected from the (possibly freed) sem_array, making it safe to return from the stack frame that the sem_queue exists in. b) We stabilize our reference to the sem_array, lock the sem_array, and detach the sem_queue from the sem_array ourselves. sem_array has RCU lifetime, so for case (b), the reference can be stabilized inside an RCU read-side critical section by locklessly checking whether the sem_queue is still connected to the sem_array. However, the current code does the lockless check on sem_queue before starting an RCU read-side critical section, so the result of the lockless check immediately becomes useless. Fix it by doing rcu_read_lock() before the lockless check. Now RCU ensures that if we observe the object being on our queue, the object can't be freed until rcu_read_unlock(). This bug is only hittable on kernel builds with full preemption support (either CONFIG_PREEMPT or PREEMPT_DYNAMIC with preempt=full). Fixes: 370b262c896e ("ipc/sem: avoid idr tree lookup for interrupted semop") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 December 2022, 18:54:44 UTC
d64aaf3 i40e: Disallow ip4 and ip6 l4_4_bytes Return -EOPNOTSUPP, when user requests l4_4_bytes for raw IP4 or IP6 flow director filters. Flow director does not support filtering on l4 bytes for PCTYPEs used by IP4 and IP6 filters. Without this patch, user could create filters with l4_4_bytes fields, which did not do any filtering on L4, but only on L3 fields. Fixes: 36777d9fa24c ("i40e: check current configured input set when adding ntuple filters") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> 05 December 2022, 16:30:51 UTC
0850197 i40e: Fix for VF MAC address 0 After spawning max VFs on a PF, some VFs were not getting resources and their MAC addresses were 0. This was caused by PF sleeping before flushing HW registers which caused VIRTCHNL_VFR_VFACTIVE to not be set in time for VF. Fix by adding a sleep after hw flush. Fixes: e4b433f4a741 ("i40e: reset all VFs in parallel when rebuilding PF") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> 05 December 2022, 16:30:51 UTC
82e0572 i40e: Fix not setting default xps_cpus after reset During tx rings configuration default XPS queue config is set and __I40E_TX_XPS_INIT_DONE is locked. __I40E_TX_XPS_INIT_DONE state is cleared and set again with default mapping only during queues build, it means after first setup or reset with queues rebuild. (i.e. ethtool -L <interface> combined <number>) After other resets (i.e. ethtool -t <interface>) XPS_INIT_DONE is not cleared and those default maps cannot be set again. It results in cleared xps_cpus mapping until queues are not rebuild or mapping is not set by user. Add clearing __I40E_TX_XPS_INIT_DONE state during reset to let the driver set xps_cpus to defaults again after it was cleared. Fixes: 6f853d4f8e93 ("i40e: allow XPS with QoS enabled") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> 05 December 2022, 16:30:51 UTC
81c95fb iommu/vt-d: Fix buggy QAT device mask Impacted QAT device IDs that need extra dtlb flush quirk is ranging from 0x4940 to 0x4943. After bitwise AND device ID with 0xfffc the result should be 0x4940 instead of 0x494c to identify these devices. Fixes: e65a6897be5e ("iommu/vt-d: Add a fix for devices need extra dtlb flush") Reported-by: Raghunathan Srinivasan <raghunathan.srinivasan@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Link: https://lore.kernel.org/r/20221203005610.2927487-1-jacob.jun.pan@linux.intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> 05 December 2022, 13:27:03 UTC
back to top