https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
dd775ae Linux 3.4-rc1 31 March 2012, 23:24:09 UTC
b7ffff4 Merge branch 's3-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio-console Pull virtio S3 support patches from Amit Shah: "Turns out S3 is not different from S4 for virtio devices: the device is assumed to be reset, so the host and guest state are to be assumed to be out of sync upon resume. We handle the S4 case with exactly the same scenario, so just point the suspend/resume routines to the freeze/restore ones. Once that is done, we also use the PM API's macro to initialise the sleep functions. A couple of cleanups are included: there's no need for special thaw processing in the balloon driver, so that's addressed in patches 1 and 2. Testing: both S3 and S4 support have been tested using these patches using a similar method used earlier during S4 patch development: a guest is started with virtio-blk as the only disk, a virtio network card, a virtio-serial port and a virtio balloon device. Ping from guest to host, dd /dev/zero to a file on the disk, and IO from the host on the virtio-serial port, all at once, while exercising S4 and S3 (separately) were tested. They all continue to work fine after resume. virtio balloon values too were tested by inflating and deflating the balloon." Pulling from Amit, since Rusty is off getting married (and presumably shaving people). * 's3-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio-console: virtio-pci: switch to PM ops macro to initialise PM functions virtio-pci: S3 support virtio-pci: drop restore_common() virtio: drop thaw PM operation virtio: balloon: Allow stats update after restore from S4 31 March 2012, 22:11:39 UTC
8bb1f22 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull second try at vfs part d#2 from Al Viro: "Miklos' first series (with do_lookup() rewrite split into edible chunks) + assorted bits and pieces. The 'untangling of do_lookup()' series is is a splitup of what used to be a monolithic patch from Miklos, so this series is basically "how do I convince myself that his patch is correct (or find a hole in it)". No holes found and I like the resulting cleanup, so in it went..." Changes from try 1: Fix a boot problem with selinux, and commit messages prettied up a bit. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits) vfs: fix out-of-date dentry_unhash() comment vfs: split __lookup_hash untangling do_lookup() - take __lookup_hash()-calling case out of line. untangling do_lookup() - switch to calling __lookup_hash() untangling do_lookup() - merge d_alloc_and_lookup() callers untangling do_lookup() - merge failure exits in !dentry case untangling do_lookup() - massage !dentry case towards __lookup_hash() untangling do_lookup() - get rid of need_reval in !dentry case untangling do_lookup() - eliminate a loop. untangling do_lookup() - expand the area under ->i_mutex untangling do_lookup() - isolate !dentry stuff from the rest of it. vfs: move MAY_EXEC check from __lookup_hash() vfs: don't revalidate just looked up dentry vfs: fix d_need_lookup/d_revalidate order in do_lookup ext3: move headers to fs/ext3/ migrate ext2_fs.h guts to fs/ext2/ext2.h new helper: ext2_image_size() get rid of pointless includes of ext2_fs.h ext2: No longer export ext2_fs.h to user space mtdchar: kill persistently held vfsmount ... 31 March 2012, 20:42:57 UTC
f22e08a Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar. * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix incorrect usage of for_each_cpu_mask() in select_fallback_rq() sched: Fix __schedule_bug() output when called from an interrupt sched/arch: Introduce the finish_arch_post_lock_switch() scheduler callback 31 March 2012, 20:35:31 UTC
f187e9f Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates and fixes from Ingo Molnar: "It's mostly fixes, but there's also two late items: - preliminary GTK GUI support for perf report - PMU raw event format descriptors in sysfs, to be parsed by tooling The raw event format in sysfs is a new ABI. For example for the 'CPU' PMU we have: aldebaran:~> ll /sys/bus/event_source/devices/cpu/format/* -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/any -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/cmask -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/edge -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/event -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/inv -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/offcore_rsp -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/pc -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/umask those lists of fields contain a specific format: aldebaran:~> cat /sys/bus/event_source/devices/cpu/format/offcore_rsp config1:0-63 So, those who wish to specify raw events can now use the following event format: -e cpu/cmask=1,event=2,umask=3 Most people will not want to specify any events (let alone raw events), they'll just use whatever default event the tools use. But for more obscure PMU events that have no cross-architecture generic events the above syntax is more usable and a bit more structured than specifying hex numbers." * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) perf tools: Remove auto-generated bison/flex files perf annotate: Fix off by one symbol hist size allocation and hit accounting perf tools: Add missing ref-cycles event back to event parser perf annotate: addr2line wants addresses in same format as objdump perf probe: Finder fails to resolve function name to address tracing: Fix ent_size in trace output perf symbols: Handle NULL dso in dso__name_len perf symbols: Do not include libgen.h perf tools: Fix bug in raw sample parsing perf tools: Fix display of first level of callchains perf tools: Switch module.h into export.h perf: Move mmap page data_head offset assertion out of header perf: Fix mmap_page capabilities and docs perf diff: Fix to work with new hists design perf tools: Fix modifier to be applied on correct events perf tools: Fix various casting issues for 32 bits perf tools: Simplify event_read_id exit path tracing: Fix ftrace stack trace entries tracing: Move the tracing_on/off() declarations into CONFIG_TRACING perf report: Add a simple GTK2-based 'perf report' browser ... 31 March 2012, 20:34:04 UTC
adb3b1f Merge tag 'parisc-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6 Pull PARISC misc updates from James Bottomley: "This is a couple of minor updates (fixing lws futex locking and removing some obsolete cpu_*_map calls)." * tag 'parisc-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] remove references to cpu_*_map. [PARISC] futex: Use same lock set as lws calls 31 March 2012, 20:32:30 UTC
a75ee6e Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 Pull SCSI updates from James Bottomley: "This is primarily another round of driver updates (lpfc, bfa, fcoe, ipr) plus a new ufshcd driver. There shouldn't be anything controversial in here (The final deletion of scsi proc_ops which caused some build breakage has been held over until the next merge window to give us more time to stabilise it). I'm afraid, with me moving continents at exactly the wrong time, anything submitted after the merge window opened has been held over to the next merge window." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits) [SCSI] ipr: Driver version 2.5.3 [SCSI] ipr: Increase alignment boundary of command blocks [SCSI] ipr: Increase max concurrent oustanding commands [SCSI] ipr: Remove unnecessary memory barriers [SCSI] ipr: Remove unnecessary interrupt clearing on new adapters [SCSI] ipr: Fix target id allocation re-use problem [SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision [SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up [SCSI] bfa: Update the driver version to 3.0.23.0 [SCSI] bfa: BSG and User interface fixes. [SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario. [SCSI] bfa: Move service parameter programming logic into firmware. [SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation. [SCSI] bfa: Flash controller IOC pll init fixes. [SCSI] bfa: Serialize the IOC hw semaphore unlock logic. [SCSI] bfa: Modify ISR to process pending completions [SCSI] bfa: Add fc host issue lip support [SCSI] mpt2sas: remove extraneous sas_log_info messages [SCSI] libfc: fcoe_transport_create fails in single-CPU environment [SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2] ... 31 March 2012, 20:31:23 UTC
c0d0259 vfs: fix out-of-date dentry_unhash() comment 64252c75a2196a0cf1e0d3777143ecfe0e3ae650 "vfs: remove dget() from dentry_unhash()" changed the implementation but not the comment. Cc: Sage Weil <sage@newdream.net> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:17 UTC
bad6118 vfs: split __lookup_hash Split __lookup_hash into two component functions: lookup_dcache - tries cached lookup, returns whether real lookup is needed lookup_real - calls i_op->lookup This eliminates code duplication between d_alloc_and_lookup() and d_inode_lookup(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:17 UTC
81e6f52 untangling do_lookup() - take __lookup_hash()-calling case out of line. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:17 UTC
a325554 untangling do_lookup() - switch to calling __lookup_hash() now we have __lookup_hash() open-coded if !dentry case; just call the damn thing instead... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:16 UTC
a6ecdfc untangling do_lookup() - merge d_alloc_and_lookup() callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:16 UTC
ec335e9 untangling do_lookup() - merge failure exits in !dentry case Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:16 UTC
d774a05 untangling do_lookup() - massage !dentry case towards __lookup_hash() Reorder if-else cases for starters... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:16 UTC
08b0ab7 untangling do_lookup() - get rid of need_reval in !dentry case Everything arriving into if (!dentry) will have need_reval = 1. Indeed, the only way to get there with need_reval reset to 0 would be via if (unlikely(d_need_lookup(dentry))) goto unlazy; if (unlikely(dentry->d_flags & DCACHE_OP_REVALIDATE)) { status = d_revalidate(dentry, nd); if (unlikely(status <= 0)) { if (status != -ECHILD) need_reval = 0; goto unlazy; ... unlazy: /* no assignments to dentry */ if (dentry && unlikely(d_need_lookup(dentry))) { dput(dentry); dentry = NULL; } and if d_need_lookup() had already been false the first time around, it will remain false on the second call as well. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:16 UTC
acc9cb3 untangling do_lookup() - eliminate a loop. d_lookup() *will* fail after successful d_invalidate(), if we are holding i_mutex all along. IOW, we don't need to jump back to l: - we know what path will be taken there and can do that (i.e. d_alloc_and_lookup()) directly. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:16 UTC
37c17e1 untangling do_lookup() - expand the area under ->i_mutex keep holding ->i_mutex over revalidation parts Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:16 UTC
3f6c7c7 untangling do_lookup() - isolate !dentry stuff from the rest of it. Duplicate the revalidation-related parts into if (!dentry) branch. Next step will be to pull them under i_mutex. This and the next 8 commits are more or less a splitup of patch by Miklos; folks, when you are working with something that convoluted, carve your patches up into easily reviewed steps, especially when a lot of codepaths involved are rarely hit... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:16 UTC
cda309d vfs: move MAY_EXEC check from __lookup_hash() The only caller of __lookup_hash() that needs the exec permission check on parent is lookup_one_len(). All lookup_hash() callers already checked permission in LOOKUP_PARENT walk. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:16 UTC
3637c05 vfs: don't revalidate just looked up dentry __lookup_hash() calls ->lookup() if the dentry needs lookup and on success revalidates the dentry (all under dir->i_mutex). While this is harmless it doesn't make a lot of sense. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:16 UTC
fa4ee15 vfs: fix d_need_lookup/d_revalidate order in do_lookup Doing revalidate on a dentry which has not yet been looked up makes no sense. Move the d_need_lookup() check before d_revalidate(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:16 UTC
4613ad1 ext3: move headers to fs/ext3/ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:16 UTC
f7699f2 migrate ext2_fs.h guts to fs/ext2/ext2.h Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:16 UTC
39429c5 new helper: ext2_image_size() ... implemented that way since the next commit will leave it almost alone in ext2_fs.h - most of the file (including struct ext2_super_block) is going to move to fs/ext2/ext2.h. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:16 UTC
2f99c36 get rid of pointless includes of ext2_fs.h Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:15 UTC
4a165d2 ext2: No longer export ext2_fs.h to user space Since the on-disk format has been stable for quite some time, users should either use the headers provided by libext2fs or keep a private copy of this header. For the full discussion, see this thread: https://lkml.org/lkml/2012/3/21/516 While at it, this commit removes all __KERNEL__ guards, which are now unnecessary. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jan Kara <jack@suse.cz> Cc: Ted Ts'o <tytso@mit.edu> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Andreas Dilger <aedilger@gmail.com> Cc: linux-ext4@vger.kernel.org 31 March 2012, 20:03:15 UTC
00292bb mtdchar: kill persistently held vfsmount ... and mtdchar_notifier along with it; just have ->drop_inode() that will unconditionally get evict them instead of dances on mtd device removal and use simple_pin_fs() instead of kern_mount() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:15 UTC
22a71c3 pstore: trim pstore_get_inode() move mode-dependent parts to callers, kill unused arguments Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:15 UTC
a2e1859 aio: take final put_ioctx() into callers of io_destroy() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:15 UTC
06af121 aio: merge aio_cancel_all() with wait_for_all_aios() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:15 UTC
a1c2aa1 selinuxfs: merge dentry allocation into sel_make_dir() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 31 March 2012, 20:03:15 UTC
c9651e7 ASPM: Fix pcie devices with non-pcie children Since 3.2.12 and 3.3, some systems are failing to boot with a BUG_ON. Some other systems using the pata_jmicron driver fail to boot because no disks are detected. Passing pcie_aspm=force on the kernel command line works around it. The cause: commit 4949be16822e ("PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled") changed the behaviour of pcie_aspm_sanity_check() to always return 0 if aspm is disabled, in order to avoid cases where we changed ASPM state on pre-PCIe 1.1 devices. This skipped the secondary function of pcie_aspm_sanity_check which was to avoid us enabling ASPM on devices that had non-PCIe children, causing trouble later on. Move the aspm_disabled check so we continue to honour that scenario. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42979 and http://bugs.debian.org/665420 Reported-by: Romain Francoise <romain@orebokech.com> # kernel panic Reported-by: Chris Holland <bandidoirlandes@gmail.com> # disk detection trouble Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@vger.kernel.org Tested-by: Hatem Masmoudi <hatem.masmoudi@gmail.com> # Dell Latitude E5520 Tested-by: janek <jan0x6c@gmail.com> # pata_jmicron with JMB362/JMB363 [jn: with more symptoms in log message] Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 31 March 2012, 19:49:56 UTC
cdb0f9a selinux: inline avc_audit() and avc_has_perm_noaudit() into caller Now that all the slow-path code is gone from these functions, we can inline them into the main caller - avc_has_perm_flags(). Now the compiler can see that 'avc' is allocated on the stack for this case, which helps register pressure a bit. It also actually shrinks the total stack frame, because the stack frame that avc_has_perm_flags() always needed (for that 'avc' allocation) is now sufficient for the inlined functions too. Inlining isn't bad - but mindless inlining of cold code (see the previous commit) is. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 31 March 2012, 18:24:22 UTC
a554bea selinux: don't inline slow-path code into avc_has_perm_noaudit() The selinux AVC paths remain some of the hottest (and deepest) codepaths at filename lookup time, and we make it worse by having the slow path cases take up I$ and stack space even when they don't trigger. Gcc tends to always want to inline functions that are just called once - never mind that this might make for slower and worse code in the caller. So this tries to improve on it a bit by making the slow-path cases explicitly separate functions that are marked noinline, causing gcc to at least no longer allocate stack space for them unless they are actually called. It also seems to help register allocation a tiny bit, since gcc now doesn't take the slow case code into account. Uninlining the slow path may also allow us to inline the remaining hot path into the one caller that actually matters: avc_has_perm_flags(). I'll have to look at that separately, but both avc_audit() and avc_has_perm_noaudit() are now small and lean enough that inlining them may make sense. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 31 March 2012, 18:24:22 UTC
e3831ed sched: Fix incorrect usage of for_each_cpu_mask() in select_fallback_rq() The function for_each_cpu_mask() expects a *pointer* to struct cpumask as its second argument, whereas select_fallback_rq() passes the value itself. And moreover, for_each_cpu_mask() has been marked as obselete in include/linux/cpumask.h. So move to the more appropriate for_each_cpu() variant. Reported-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Dave Jones <davej@redhat.com> Cc: Liu Chuansheng <chuansheng.liu@intel.com> Cc: vapier@gentoo.org Cc: rusty@rustcorp.com.au Link: http://lkml.kernel.org/r/4F75BED4.9050005@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 31 March 2012, 08:43:36 UTC
8ebfdf2 Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent 31 March 2012, 07:27:41 UTC
f878d0b virtio-pci: switch to PM ops macro to initialise PM functions Use the SET_SYSTEM_SLEEP_PM_OPS macro to initialise the suspend/resume functions in the new PM API. Signed-off-by: Amit Shah <amit.shah@redhat.com> 31 March 2012, 02:39:51 UTC
04c2322 virtio-pci: S3 support There's no difference in supporting S3 and S4 for virtio devices: the vqs have to be re-created as the device has to be assumed to be reset at restore-time. Since S4 already handles this situation, we can directly use the same code and callbacks for S3 support. Signed-off-by: Amit Shah <amit.shah@redhat.com> 31 March 2012, 02:39:51 UTC
0517fdd virtio-pci: drop restore_common() restore_common() was shared between restore and thaw callbacks. With thaw gone, we don't need restore_common() anymore. Signed-off-by: Amit Shah <amit.shah@redhat.com> 31 March 2012, 02:39:51 UTC
f38f838 virtio: drop thaw PM operation The thaw operation was used by the balloon driver, but after the last commit there's no reason to have separate thaw and restore callbacks. Signed-off-by: Amit Shah <amit.shah@redhat.com> 31 March 2012, 02:39:50 UTC
e47d854 virtio: balloon: Allow stats update after restore from S4 There's no reason stats update after restore can't work. If a host requested for stats, and before servicing the request, the guest entered S4, upon restore, the stats request can still be processed and sent off to the host. Signed-off-by: Amit Shah <amit.shah@redhat.com> 31 March 2012, 02:39:50 UTC
fa2a451 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull Sam Ravnborg's sparc32 build fixes from David Miller. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc32: fix fallout from system.h removal 31 March 2012, 01:40:33 UTC
bde4d8b sparc32: fix fallout from system.h removal Build failures for the typical configs I use Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net> 31 March 2012, 01:16:58 UTC
923f797 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild changes from Michal Marek: - Unification of cmd_uimage among archs that use it - make headers_check tries harder before reporting a missing <linux/types.h> include - kbuild portability fix for shells that do not support echo -e - make clean descends into samples/ - setlocalversion grep fix - modpost typo fix - dtc warnings fix * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: setlocalversion: Use "grep -q" instead of piping output to "read dummy" modpost: fix ALL_INIT_DATA_SECTIONS Kbuild: centralize MKIMAGE and cmd_uimage definitions headers_check: recursively search for linux/types.h inclusion scripts/Kbuild.include: Fix portability problem of "echo -e" scripts: dtc: fix compile warnings kbuild: clean up samples directory kbuild: disable -Wmissing-field-initializers for W=1 31 March 2012, 01:15:43 UTC
a7697b9 Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull non-critical part of kbuild from Michal Marek: - New semantic patches, make coccicheck M= fix - make gtags speedup - make tags/TAGS always removes struct forward declarations - make deb-pkg fixes (some patches are still pending, I know) - scripts/patch-kernel fix from the last user of this script ;) * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scripts/patch-kernel: digest kernel.org hosted .xz patches scripts/coccinelle/api/ptr_ret.cocci: semantic patch for ptr_err scripts: refactor remove structure forward declarations kbuild: incremental tags update for GNU Global coccinelle: semantic patch for bool issues coccinelle: semantic patch to check for PTR_ERR after reassignment coccinelle: semantic patch converting 0 test to null test coccinelle: semantic patch for missing iounmap coccinelle: semantic patch for missing clk_put kbuild: Fix out-of-tree build for 'make deb-pkg' kbuild: Only build linux-image package for UML kbuild: Fix link to headers in 'make deb-pkg' coccicheck: change handling of C={1,2} when M= is set 31 March 2012, 01:14:05 UTC
2b17b43 Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig bits from Michal Marek: "There is one fix for make oldconfig by Arnaud and updates to the merge_config.sh tool." * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: merge_config.sh: Add option to display redundant configs merge_config.sh: Set execute bit merge_config.sh: Use the first file as the initial config kconfig: fix new choices being skipped upon config update 31 March 2012, 01:13:17 UTC
f558c27 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull genirq updates from Thomas Gleixner. * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Adjust irq thread affinity on IRQ_SET_MASK_OK_NOCOPY return value genirq: Respect NUMA node affinity in setup_irq_irq affinity() genirq: Get rid of unneeded force parameter in irq_finalize_oneshot() genirq: Minor readablity improvement in irq_wake_thread() 31 March 2012, 01:08:05 UTC
3a0d184 Merge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking updates from Thomas Gleixner. * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Mark get_robust_list as deprecated futex: Do not leak robust list to unprivileged process 31 March 2012, 01:07:13 UTC
623ff77 Merge tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6 Pull MTD changes from David Woodhouse: - Artem's cleanup of the MTD API continues apace. - Fixes and improvements for ST FSMC and SuperH FLCTL NAND, amongst others. - More work on DiskOnChip G3, new driver for DiskOnChip G4. - Clean up debug/warning printks in JFFS2 to use pr_<level>. Fix up various trivial conflicts, largely due to changes in calling conventions for things like dmaengine_prep_slave_sg() (new inline wrapper to hide new parameter, clashing with rewrite of previously last parameter that used to be an 'append' flag, and is now a bitmap of 'unsigned long flags'). (Also some header file fallout - like so many merges this merge window - and silly conflicts with sparse fixes) * tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6: (120 commits) mtd: docg3 add protection against concurrency mtd: docg3 refactor cascade floors structure mtd: docg3 increase write/erase timeout mtd: docg3 fix inbound calculations mtd: nand: gpmi: fix function annotations mtd: phram: fix section mismatch for phram_setup mtd: unify initialization of erase_info->fail_addr mtd: support ONFI multi lun NAND mtd: sm_ftl: fix typo in major number. mtd: add device-tree support to spear_smi mtd: spear_smi: Remove default partition information from driver mtd: Add device-tree support to fsmc_nand mtd: fix section mismatch for doc_probe_device mtd: nand/fsmc: Remove sparse warnings and errors mtd: nand/fsmc: Add DMA support mtd: nand/fsmc: Access the NAND device word by word whenever possible mtd: nand/fsmc: Use dev_err to report error scenario mtd: nand/fsmc: Use devm routines mtd: nand/fsmc: Modify fsmc driver to accept nand timing parameters via platform mtd: fsmc_nand: add pm callbacks to support hibernation ... 31 March 2012, 00:31:56 UTC
c39e8ed Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull a few more ARM platform fixes from Olof Johansson: "Apologies for back-to-back fixes pull requests, but one of the patches below are the kind we'll see posted over and over if we don't send it in. I hadn't done the full sanity-check of defconfig builds by the time I sent up the other fixes yesterday or I would have included it then. Two patches, one dealing with the system.h fallout, the other is a missing linux/bug.h in a place where ARRAY_SIZE() is used." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: clps711x: fix missing include file ARM: fix builds due to missing <asm/system_misc.h> includes 31 March 2012, 00:00:34 UTC
a335750 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & Power Management changes from Len Brown: - ACPI 5.0 after-ripples, ACPICA/Linux divergence cleanup - cpuidle evolving, more ARM use - thermal sub-system evolving, ditto - assorted other PM bits Fix up conflicts in various cpuidle implementations due to ARM cpuidle cleanups (ARM at91 self-refresh and cpu idle code rewritten into "standby" in asm conflicting with the consolidation of cpuidle time keeping), trivial SH include file context conflict and RCU tracing fixes in generic code. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (77 commits) ACPI throttling: fix endian bug in acpi_read_throttling_status() Disable MCP limit exceeded messages from Intel IPS driver ACPI video: Don't start video device until its associated input device has been allocated ACPI video: Harden video bus adding. ACPI: Add support for exposing BGRT data ACPI: export acpi_kobj ACPI: Fix logic for removing mappings in 'acpi_unmap' CPER failed to handle generic error records with multiple sections ACPI: Clean redundant codes in scan.c ACPI: Fix unprotected smp_processor_id() in acpi_processor_cst_has_changed() ACPI: consistently use should_use_kmap() PNPACPI: Fix device ref leaking in acpi_pnp_match ACPI: Fix use-after-free in acpi_map_lsapic ACPI: processor_driver: add missing kfree ACPI, APEI: Fix incorrect APEI register bit width check and usage Update documentation for parameter *notrigger* in einj.txt ACPI, APEI, EINJ, new parameter to control trigger action ACPI, APEI, EINJ, limit the range of einj_param ACPI, APEI, Fix ERST header length check cpuidle: power_usage should be declared signed integer ... 30 March 2012, 23:45:39 UTC
10f3cb4 Merge git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French. * git://git.samba.org/sfrench/cifs-2.6: [CIFS] Update CIFS version number to 1.77 CIFS: Add missed forcemand mount option [CIFS] Fix trivial sparse warning with asyn i/o patch cifs: handle "sloppy" option appropriately cifs: use standard token parser for mount options cifs: remove /proc/fs/cifs/OplockEnabled cifs: convert cifs_iovec_write to use async writes cifs: call cifs_update_eof with i_lock held cifs: abstract out function to marshal up the iovec array for async writes cifs: fix up get_numpages cifs: make cifsFileInfo_get return the cifsFileInfo pointer cifs: fix allocation in cifs_write_allocate_pages cifs: allow caller to specify completion op when allocating writedata cifs: add pid field to cifs_writedata cifs: add new cifsiod_wq workqueue CIFS: Change mid_q_entry structure fields CIFS: Expand CurrentMid field CIFS: Separate protocol-specific code from cifs_readv_receive code CIFS: Separate protocol-specific code from demultiplex code CIFS: Separate protocol-specific code from transport routines 30 March 2012, 23:24:38 UTC
919c840 Merge tag 'for-v3.4-rc1' of git://git.infradead.org/battery-2.6 Pull battery updates from Anton Vorontsov: "Various small bugfixes and enhancements, plus two new drivers: - A quite complex ab8500 charger driver, submitted by Arun Murthy @ ST-Ericsson; - Summit Microelectronics SMB347 Battery Charger, submitted by Bruce E Robertson and Alan Cox @ Intel. And that's all." * tag 'for-v3.4-rc1' of git://git.infradead.org/battery-2.6: (36 commits) max17042_battery: Clean up interrupt handling Revert "max8998_charger: Include linux/module.h just once" ab8500_fg: Fix some build warnings on x86_64 max17042_battery: Fix CHARGE_FULL representation. max8998_charger: Include linux/module.h just once power_supply: Convert i2c drivers to module_i2c_driver lp8727_charger: Add MODULE_DEVICE_TABLE charger-manager: Simplify charger_get_property(), get rid of a warning charger-manager: Clean up for better readability da9052-battery: Convert to use module_platform_driver da9052-battery: Fix a memory leak when unload the module da9052-battery: Add missing platform_set_drvdata ab8500: Turn unneeded global symbols into local ones ab8500_fg: Fix copy-paste error ab8500_fg: Get rid of 'struct battery_type' ab8500_fg: Get rid of 'struct v_to_cap' ab8500_btemp: Get rid of 'enum adc_therm' ab8500_charger: Convert to the new USB OTG calls ab8500-btemp: AB8500 battery temperature driver ab8500-fg: A8500 fuel gauge driver ... 30 March 2012, 23:09:02 UTC
a9d38a4 Merge branch 'dunlap' (Randy's Documentation patches) Merge Documentation fixes from Randy Dunlap. Fixed up several small annoyances (bad changelogs and corrupted utf8 names), I need to try to convince people to do things right. * emailed from Randy Dunlap <rdunlap@xenotime.net>: Documentation: fix typo in ABI/stable/sysfs-driver-usb-usbtmc Documentation: replace install commands with softdeps Documentation: remove references to /etc/modprobe.conf Documentation: input.txt: clarify mousedev 'cat' command syntax Documentation: CodingStyle: add inline assembly guidelines Documentation: sysrq: Crutcher Dunnavant is unavailable Documentation: mention scripts/diffconfig tool Documentation: remove 'mach' from dontdiff file 30 March 2012, 23:03:55 UTC
c480138 Documentation: fix typo in ABI/stable/sysfs-driver-usb-usbtmc Fix "the the" in ABI/stable/sysfs-driver-usb-usbtmc Signed-off-by: Rafal Kapela <raf.kapela@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 March 2012, 23:03:15 UTC
78286cd Documentation: replace install commands with softdeps Install commands should not be used to specify soft dependencies among modules. When loading modules it's much better to have a softdep that modprobe knows what's being done than having to fork/exec another instance of modprobe to load the other module. By using a softdep user has also an option to remove the dependencies when removing the module (and if its refcount dropped to 0) Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 March 2012, 23:03:15 UTC
970e248 Documentation: remove references to /etc/modprobe.conf Usage of /etc/modprobe.conf file was deprecated by module-init-tools and is no longer parsed by new kmod tool. References to this file are replaced in Documentation, comments and Kconfig according to the context. There are also some references to the old /etc/modules.conf from 2.4 kernels that are being removed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 March 2012, 23:03:15 UTC
0960152 Documentation: input.txt: clarify mousedev 'cat' command syntax Clarify that the 'cat' command does not include the (c, 13, 32) after it. Reported-by: Dan Jidanni Jacobson <jidanni@jidanni.org> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 March 2012, 23:03:15 UTC
9a7c48b Documentation: CodingStyle: add inline assembly guidelines Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 March 2012, 23:03:15 UTC
21106b0 Documentation: sysrq: Crutcher Dunnavant is unavailable Reported-by: Křištof Želechovski <giecrilj@stegny.2a.pl> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 March 2012, 23:03:15 UTC
673d29f Documentation: mention scripts/diffconfig tool The kconfig documentation suggests using plain 'diff' to compare config files and then adds "Yes, we need something better here". Commit a717417e7f96 ("kconfig: add diffconfig utility") added what that comment was looking for. Signed-off-by: Javi Merino <javi.merino@arm.com> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 March 2012, 23:03:15 UTC
f52a759 Documentation: remove 'mach' from dontdiff file The mach entry in the dontdiff file causes all the arch/arm/mach-*/include/mach directories to be skipped. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 March 2012, 23:03:15 UTC
d3c7de5 ARM: clps711x: fix missing include file linux/bug.h is needed due to an ARRAY_SIZE being used: arch/arm/mach-clps711x/edb7211-mm.c: In function 'edb7211_map_io': arch/arm/mach-clps711x/edb7211-mm.c:79:9: error: implicit declaration of function 'BUILD_BUG_ON_ZERO' Signed-off-by: Olof Johansson <olof@lixom.net> 30 March 2012, 22:44:48 UTC
86dfe44 ARM: fix builds due to missing <asm/system_misc.h> includes This does a sweeping change fixing up all the missing system_misc.h and system_info.h includes from the system.h split-up change. These were the ones I came across when building all defconfigs in arch/arm/configs, there might be more but they lack adequate build coverage to be easily caught. I'm expecting to get a lot of these piecemeal by each maintainer, so we might just as well do one sweeping change to get them all at once. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net> 30 March 2012, 22:44:40 UTC
f5cb92a genirq: Adjust irq thread affinity on IRQ_SET_MASK_OK_NOCOPY return value irq_move_masked_irq() checks the return code of chip->irq_set_affinity() only for 0, but IRQ_SET_MASK_OK_NOCOPY is also a valid return code, which is there to avoid a redundant copy of the cpumask. But in case of IRQ_SET_MASK_OK_NOCOPY we not only avoid the redundant copy, we also fail to adjust the thread affinity of an eventually threaded interrupt handler. Handle IRQ_SET_MASK_OK (==0) and IRQ_SET_MASK_OK_NOCOPY(==1) return values correctly by checking the valid return values seperately. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Keping Chen <chenkeping@huawei.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1333120296-13563-2-git-send-email-jiang.liu@huawei.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 30 March 2012, 21:13:46 UTC
d326f44 Merge branch 'tboot' into release Conflicts: drivers/acpi/acpica/hwsleep.c Text conflict between: 2feec47d4c5f80b05f1650f5a24865718978eea4 (ACPICA: ACPI 5: Support for new FADT SleepStatus, SleepControl registers) which removed #include "actables.h" and 09f98a825a821f7a3f1b162f9ed023f37213a63b (x86, acpi, tboot: Have a ACPI os prepare sleep instead of calling tboot_sleep.) which removed #include <linux/tboot.h> The resolution is to remove them both. Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 20:38:59 UTC
ec612fc Merge branch 'd3' into release Conflicts: drivers/acpi/sleep.c This was a text conflict between a2ef5c4fd44ce3922435139393b89f2cce47f576 (ACPI: Move module parameter gts and bfs to sleep.c) which added #include <linux/module.h> and b24e5098853653554baf6ec975b9e855f3d6e5c0 (ACPI, PCI: Move acpi_dev_run_wake() to ACPI core) which added #include <linux/pm_runtime.h> The resolution was to take them both. Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 20:21:26 UTC
73f0533 Merge branch 'apei' into release Conflicts: drivers/acpi/apei/apei-base.c This was a conflict between 15afae604651d4e17652d2ffb56f5e36f991cfef (CPI, APEI: Fix incorrect APEI register bit width check and usage) and 653f4b538f66d37db560e0f56af08117136d29b7 (ACPICA: Expand OSL memory read/write interfaces to 64 bits) The former changed a parameter in the call to acpi_os_read_memory64() and the later replaced all calls to acpi_os_read_memory64() with calls to acpi_os_read_memory(). Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 20:14:02 UTC
1a05e46 Merge branches 'acpica', 'bgrt', 'bz-11533', 'cpuidle', 'ec', 'hotplug', 'misc', 'red-hat-bz-727865', 'thermal', 'throttling', 'turbostat' and 'video' into release Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 20:10:37 UTC
344e222 ACPI throttling: fix endian bug in acpi_read_throttling_status() Using a u64 here creates an endian bug. We store a u32 number in the top byte which is a larger number than intended on big endian systems. There is no reason to use a 64 bit data type here, I guess it was just an oversight. I removed the initialization to zero as well. It's needed with a u64 but with a u32, the variable gets initialized properly inside the call to acpi_os_read_port(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 20:06:12 UTC
c264c65 Disable MCP limit exceeded messages from Intel IPS driver On a system on the thermal limit these are quite noisy and flood the logs. Better would be a counter anyways. But given that we don't even have anything for normal throttling this doesn't seem to be urgent either. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 20:06:12 UTC
b60e7f6 ACPI video: Don't start video device until its associated input device has been allocated Quoth Dmitry Torokhov: In addition to bus notifier we do install device notifier explicitly so it might fire up early. The easiest fox would be to move acpi_video_bus_start_devices() after input_allocate_device() but before input_register_device() - unregistered input devices can handle input_event() calls just fine. May fix crashes reported in: https://bugzilla.kernel.org/show_bug.cgi?id=40672 Signed-off-by: Igor Murzov <e-mail@date.by> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 19:47:52 UTC
9613beb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes and features from Chris Mason: "We've merged in the error handling patches from SuSE. These are already shipping in the sles kernel, and they give btrfs the ability to abort transactions and go readonly on errors. It involves a lot of churn as they clarify BUG_ONs, and remove the ones we now properly deal with. Josef reworked the way our metadata interacts with the page cache. page->private now points to the btrfs extent_buffer object, which makes everything faster. He changed it so we write an whole extent buffer at a time instead of allowing individual pages to go down,, which will be important for the raid5/6 code (for the 3.5 merge window ;) Josef also made us more aggressive about dropping pages for metadata blocks that were freed due to COW. Overall, our metadata caching is much faster now. We've integrated my patch for metadata bigger than the page size. This allows metadata blocks up to 64KB in size. In practice 16K and 32K seem to work best. For workloads with lots of metadata, this cuts down the size of the extent allocation tree dramatically and fragments much less. Scrub was updated to support the larger block sizes, which ended up being a fairly large change (thanks Stefan Behrens). We also have an assortment of fixes and updates, especially to the balancing code (Ilya Dryomov), the back ref walker (Jan Schmidt) and the defragging code (Liu Bo)." Fixed up trivial conflicts in fs/btrfs/scrub.c that were just due to removal of the second argument to k[un]map_atomic() in commit 7ac687d9e047. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (75 commits) Btrfs: update the checks for mixed block groups with big metadata blocks Btrfs: update to the right index of defragment Btrfs: do not bother to defrag an extent if it is a big real extent Btrfs: add a check to decide if we should defrag the range Btrfs: fix recursive defragment with autodefrag option Btrfs: fix the mismatch of page->mapping Btrfs: fix race between direct io and autodefrag Btrfs: fix deadlock during allocating chunks Btrfs: show useful info in space reservation tracepoint Btrfs: don't use crc items bigger than 4KB Btrfs: flush out and clean up any block device pages during mount btrfs: disallow unequal data/metadata blocksize for mixed block groups Btrfs: enhance superblock sanity checks Btrfs: change scrub to support big blocks Btrfs: minor cleanup in scrub Btrfs: introduce common define for max number of mirrors Btrfs: fix infinite loop in btrfs_shrink_device() Btrfs: fix memory leak in resolver code Btrfs: allow dup for data chunks in mixed mode Btrfs: validate target profiles only if we are going to use them ... 30 March 2012, 19:44:29 UTC
ea9f885 ACPI video: Harden video bus adding. It is always better to check return values, so add some new checks and correct existing ones. v2: Be consistent and don't mix errors from -E* and AE_* namespaces. Signed-off-by: Igor Murzov <e-mail@date.by> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 19:44:05 UTC
40380f1 ia64: Fixup asm/cmpxchg.h The empty asm/cmpxchg.h file that was provided as a temporary build fix for the asm/system.h disintgration build problem should really include <asm/intrinsics.h> to make definitions of xchg() and cmpxchg() available. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 March 2012, 19:34:07 UTC
48a4675 Merge tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes for 3.4-rc1, including - mic-recording regression fix for Realtek codec - clean-up of dmaengine parameter mess - WM8894 calibration tweak - minor fixes for asihpi and some bool module parms" * tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: fix isa/opti9xx module param type sound: fix oss/msnd_pinnacle module param type ALSA: asihpi - fix return type of hpios_locked_mem_alloc() ASoC: dmaengine_pcm: use dmaengine cyclic wrapper ASoC: Add extra parameter to device_prep_dma_cyclic ALSA: hda/realtek - Fix ADC assignment with a shared HP/Mic pin ASoC: wm8994: Update WM8994 DCS calibration 30 March 2012, 17:59:52 UTC
59f2fe3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 build fixes from Martin Schwidefsky. More small fixes for the system.h disintegration. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: [S390] Fix build errors (fallout from system.h disintegration) 30 March 2012, 17:57:40 UTC
307cc79 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull minor Sparc fixes from David Miller: "This just fixes build fallout due to recent changes that went int your tree." Sam Ravnborg says that sparc32 still needs some more tender loving. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Fix even more fallout from system.h split. sparc: fix fallout from system.h split 30 March 2012, 17:56:11 UTC
65f3e56 perf tools: Remove auto-generated bison/flex files These should not be in the Git history - they are auto-generated. Extend the Makefile rules of the parser files to include the generation run. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120327183335.GA27621@gmail.com [ committer note: Fixed up O= handling ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 30 March 2012, 15:43:17 UTC
354fa22 scripts/patch-kernel: digest kernel.org hosted .xz patches kernel.org is hosting patches and kernel compressed with xz (lzma2+). Allow scripts/patch-kernel to decompress these files. Signed-off-by: Shawn Landden <shawnlandden@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz> 30 March 2012, 13:23:36 UTC
9875c42 merge_config.sh: Add option to display redundant configs Provide a -r option to display when fragments contain redundant options. This is really useful when breaking apart a config into fragments, as well as cleaning up older fragments. Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Michal Marek <mmarek@suse.cz> 30 March 2012, 13:14:47 UTC
55cae30 merge_config.sh: Set execute bit Somehow the merge_config.sh script didn't get its execute bit set when it was merged. Fix this. Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Michal Marek <mmarek@suse.cz> 30 March 2012, 13:10:48 UTC
d1ff4b1 ACPI: Add support for exposing BGRT data ACPI 5.0 adds the BGRT, a table that contains a pointer to the firmware boot splash and associated metadata. This simple driver exposes it via /sys/firmware/acpi in order to allow bootsplash applications to draw their splash around the firmware image and reduce the number of jarring graphical transitions during boot. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 08:09:24 UTC
f2d4753 ACPI: export acpi_kobj Drivers may wish to add entries to /sys/firmware/acpi, so export acpi_kobj in order to let them do that. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 08:09:05 UTC
8cdde12 ACPI: Fix logic for removing mappings in 'acpi_unmap' Make sure the removal of mappings uses the same logic that put the mappings in place. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 08:05:14 UTC
37d2a36 CPER failed to handle generic error records with multiple sections The function apei_estatus_print() and apei_estatus_check() forget to move ahead the gdata pointer when dealing with multiple generic error data sections. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 08:01:26 UTC
3723997 ACPI: Clean redundant codes in scan.c Clean the redundant codes of apci_bus_get_power_flags(). Signed-off-by: Alex He <alex.he@amd.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 08:00:16 UTC
9505626 ACPI: Fix unprotected smp_processor_id() in acpi_processor_cst_has_changed() The acpi_processor_cst_has_changed() function is invoked from a CPU_ONLINE or CPU_DEAD function, which might well execute on CPU 0 even though the CPU being hotplugged is some other CPU. In addition, acpi_processor_cst_has_changed() invokes smp_processor_id() without protection, resulting in splats when onlining CPUs. This commit therefore changes the smp_processor_id() to pr->id, as is used elsewhere in the code, for example, in acpi_processor_add(). Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Tested-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 07:58:06 UTC
e252675 ACPI: consistently use should_use_kmap() ... so that acpi_unmap()'s behavior gets in sync with acpi_map()'s. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 07:51:57 UTC
1e3cab2 [S390] Fix build errors (fallout from system.h disintegration) Signed-off-by: Heiko Carstens <h.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 March 2012, 07:41:12 UTC
89e96ad PNPACPI: Fix device ref leaking in acpi_pnp_match During testing pci root bus removal, found some root bus bridge is not freed. If booting with pnpacpi=off, those hostbridge could be freed without problem. It turns out that some devices reference are not released during acpi_pnp_match. that match should not hold one device ref during every calling. Add pu_device calling before returning. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 07:38:40 UTC
ac909ec ACPI: Fix use-after-free in acpi_map_lsapic When processor is being hot-added to the system, acpi_map_lsapic invokes ACPI _MAT method to find APIC ID and flags, verifies that returned structure is indeed ACPI's local APIC structure, and that flags contain MADT_ENABLED bit. Then saves APIC ID, frees structure - and accesses structure when computing arguments for acpi_register_lapic call. Which sometime leads to acpi_register_lapic call being made with second argument zero, failing to bring processor online with error 'Unable to map lapic to logical cpu number'. As lapic->lapic_flags & ACPI_MADT_ENABLED was already confirmed to be non-zero few lines above, we can just pass unconditional ACPI_MADT_ENABLED to the acpi_register_lapic. Signed-off-by: Petr Vandrovec <petr@vmware.com> Signed-off-by: Alok N Kataria <akataria@vmware.com> Reviewed-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 07:31:58 UTC
c80f5b3 ACPI: processor_driver: add missing kfree The function acpi_processor_add is stored in the ops.add field of a acpi_driver structure. This function is then called in acpi_bus_driver_init. On failure, this function clears the field device->driver_data, but does not free its contents. Thus the free has to be done by the add function. In acpi_processor_add, the corresponding value is pr. This value is currently freed on failure before storing it in device->driver_data, but not after. This free is added in the error handling code at the end of the function. The per_cpu variable processors is also cleared so that it does not refer to a dangling pointer. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 07:30:34 UTC
15afae6 ACPI, APEI: Fix incorrect APEI register bit width check and usage The current code incorrectly assumes that (1) the APEI register bit width is always 8, 16, 32, or 64 and (2) the APEI register bit width is always equal to the APEI register access width. ERST serialization instructions entries such as: [030h 0048 1] Action : 00 [Begin Write Operation] [031h 0049 1] Instruction : 03 [Write Register Value] [032h 0050 1] Flags (decoded below) : 01 Preserve Register Bits : 1 [033h 0051 1] Reserved : 00 [034h 0052 12] Register Region : [Generic Address Structure] [034h 0052 1] Space ID : 00 [SystemMemory] [035h 0053 1] Bit Width : 03 [036h 0054 1] Bit Offset : 00 [037h 0055 1] Encoded Access Width : 03 [DWord Access:32] [038h 0056 8] Address : 000000007F2D7038 [040h 0064 8] Value : 0000000000000001 [048h 0072 8] Mask : 0000000000000007 break this assumption by yielding: [Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0] I have found no ACPI specification requirements corresponding with the above assumptions. There is even a good example in the Serialization Instruction Entries section (ACPI 4.0 section 17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2) that mentions a serialization instruction with a bit range of [6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide. Compile and boot tested with 3.3.0-rc7 on a IBM HX5. Signed-off-by: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 07:30:19 UTC
6ef19ab Update documentation for parameter *notrigger* in einj.txt Add description of parameter notrigger in the einj.txt. One can utilize this new parameter to do some SRAR injection test. Pay attention, the operation is highly depended on the BIOS implementation. If no proper BIOS supports it, even if enabling this parameter, expected result will not happen. v2: Update the documentation suggested by Tony Suggested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 07:30:19 UTC
ee49089 ACPI, APEI, EINJ, new parameter to control trigger action Some APEI firmware implementation will access injected address specified in param1 to trigger the error when injecting memory error, which means if one SRAR error is injected, the crash always happens because it is executed in kernel context. This new parameter can disable trigger action and control is taken over by the user. In this way, an SRAR error can happen in user context instead of crashing the system. This function is highly depended on BIOS implementation so please ensure you know the BIOS trigger procedure before you enable this switch. v2: notrigger should be created together with param1/param2 Tested-by: Tony Luck <tony.luck@lintel.com> Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 07:30:18 UTC
185210c ACPI, APEI, EINJ, limit the range of einj_param On the platforms with ACPI4.x support, parameter extension is not always doable, which means only parameter extension is enabled, einj_param can take effect. v2->v1: stopping early in einj_get_parameter_address for einj_param Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 07:30:18 UTC
7ed28f2 ACPI, APEI, Fix ERST header length check This fixes a trivial copy & paste error in ERST header length check. It's just for future safety because sizeof(struct acpi_table_einj) equals to sizeof(struct acpi_table_erst) with current ACPI5.0 specification. It applies to v3.3-rc6. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 07:30:17 UTC
02401c0 cpuidle: power_usage should be declared signed integer power_usage is always assigned a negative value and should be declared a signed integer Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 07:23:30 UTC
1a022e3 idle, x86: Allow off-lined CPU to enter deeper C states Currently when a CPU is off-lined it enters either MWAIT-based idle or, if MWAIT is not desired or supported, HLT-based idle (which places the processor in C1 state). This patch allows processors without MWAIT support to stay in states deeper than C1. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com> Signed-off-by: Len Brown <len.brown@intel.com> 30 March 2012, 07:23:01 UTC
back to top