Skip to main content

Browse the archive

https://github.com/torvalds/linux
27 March 2024, 02:37:15 UTC
sort by:
Revision Author Date Message Commit Date
4ef7675 Linus Torvalds 21 December 2015, 00:06:09 UTC Linux 4.4-rc6 21 December 2015, 00:06:09 UTC
9f7e432 Linus Torvalds 20 December 2015, 18:01:11 UTC Merge tag 'rtc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: "Late fixes for the RTC subsystem for 4.4: A fix for a nasty hardware bug in rk808 and an initialization reordering in da9063 to fix a possible crash" * tag 'rtc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: da9063: fix access ordering error during RTC interrupt at system power on rtc: rk808: Compensate for Rockchip calendar deviation on November 31st 20 December 2015, 18:01:11 UTC
77535ac Steve Twiss 08 December 2015, 16:28:39 UTC rtc: da9063: fix access ordering error during RTC interrupt at system power on This fix alters the ordering of the IRQ and device registrations in the RTC driver probe function. This change will apply to the RTC driver that supports both DA9063 and DA9062 PMICs. A problem could occur with the existing RTC driver if: A system is started from a cold boot using the PMIC RTC IRQ to initiate a power on operation. For instance, if an RTC alarm is used to start a platform from power off. The existing driver IRQ is requested before the device has been properly registered. i.e. ret = devm_request_threaded_irq() comes before rtc->rtc_dev = devm_rtc_device_register(); In this case, the interrupt can be called before the device has been registered and the handler can be called immediately. The IRQ handler da9063_alarm_event() contains the function call rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF); which in turn tries to access the unavailable rtc->rtc_dev. The fix is to reorder the functions inside the RTC probe. The IRQ is requested after the RTC device resource has been registered so that get_irq_byname is the last thing to happen. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> 20 December 2015, 12:39:29 UTC
f076ef4 Julius Werner 15 December 2015, 23:02:49 UTC rtc: rk808: Compensate for Rockchip calendar deviation on November 31st In A.D. 1582 Pope Gregory XIII found that the existing Julian calendar insufficiently represented reality, and changed the rules about calculating leap years to account for this. Similarly, in A.D. 2013 Rockchip hardware engineers found that the new Gregorian calendar still contained flaws, and that the month of November should be counted up to 31 days instead. Unfortunately it takes a long time for calendar changes to gain widespread adoption, and just like more than 300 years went by before the last Protestant nation implemented Greg's proposal, we will have to wait a while until all religions and operating system kernels acknowledge the inherent advantages of the Rockchip system. Until then we need to translate dates read from (and written to) Rockchip hardware back to the Gregorian format. This patch works by defining Jan 1st, 2016 as the arbitrary anchor date on which Rockchip and Gregorian calendars are in sync. From that we can translate arbitrary later dates back and forth by counting the number of November/December transitons since the anchor date to determine the offset between the calendars. We choose this method (rather than trying to regularly "correct" the date stored in hardware) since it's the only way to ensure perfect time-keeping even if the system may be shut down for an unknown number of years. The drawback is that other software reading the same hardware (e.g. mainboard firmware) must use the same translation convention (including the same anchor date) to be able to read and write correct timestamps from/to the RTC. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> 20 December 2015, 12:39:00 UTC
69c37a9 Linus Torvalds 20 December 2015, 01:44:19 UTC Merge tag 'tty-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some tty/serial driver fixes for 4.4-rc6 that resolve some reported problems. All of these have been in linux-next. The details are in the shortlog" * tag 'tty-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix GPF in flush_to_ldisc() serial: earlycon: Add missing spinlock initialization serial: sh-sci: Fix length of scatterlist n_tty: Fix poll() after buffer-limited eof push read serial: 8250_uniphier: fix dl_read and dl_write functions 20 December 2015, 01:44:19 UTC
24b0d5e Linus Torvalds 20 December 2015, 01:33:58 UTC Merge tag 'usb-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB and PHY fixes for 4.4-rc6. All of them resolve some reported problems. Full details in the shortlog" * tag 'usb-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: fix invalid memory access in hub_activate() USB: ipaq.c: fix a timeout loop phy: core: Get a refcount to phy in devm_of_phy_get_by_index() phy: cygnus: pcie: add missing of_node_put phy: miphy365x: add missing of_node_put phy: miphy28lp: add missing of_node_put phy: rockchip-usb: add missing of_node_put phy: berlin-sata: add missing of_node_put phy: mt65xx-usb3: add missing of_node_put phy: brcmstb-sata: add missing of_node_put phy: sun9i-usb: add USB dependency 20 December 2015, 01:33:58 UTC
3a87711 Linus Torvalds 20 December 2015, 00:46:46 UTC Merge tag 'md/4.4-rc5-fixes' of git://neil.brown.name/md Pull md fixes from Neil Brown: "Four fixes for md: - two recently introduced regressions fixed. - one older bug in RAID10 - tagged for -stable since 4.2 - one minor sysfs api improvement" * tag 'md/4.4-rc5-fixes' of git://neil.brown.name/md: Fix remove_and_add_spares removes drive added as spare in slot_store md: fix bug due to nested suspend MD: change journal disk role to disk 0 md/raid10: fix data corruption and crash during resync 20 December 2015, 00:46:46 UTC
35b3154 Linus Torvalds 20 December 2015, 00:40:48 UTC Merge tag 'powerpc-4.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Partial revert of "powerpc: Individual System V IPC system calls" - pr_warn_once on unsupported OPAL_MSG type from Stewart - Fix deadlock in opal-irqchip introduced by "Fix double endian conversion" from Alistair * tag 'powerpc-4.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion" powerpc/powernv: pr_warn_once on unsupported OPAL_MSG type Partial revert of "powerpc: Individual System V IPC system calls" 20 December 2015, 00:40:48 UTC
3c73a2d Linus Torvalds 19 December 2015, 18:10:43 UTC Merge tag 'spi-fix-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A couple of reference counting bugs here, one in spidev and one with holding an extra reference in the core that we never freed if we removed a device, plus a driver specific fix. Both of the refcounting bugs are very old but they've only been found by observation so hopefully their impact has been low" * tag 'spi-fix-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fix parent-device reference leak spi: spidev: Hold spi_lock over all defererences of spi in release() spi-fsl-dspi: Fix CTAR Register access 19 December 2015, 18:10:43 UTC
d525c13 Linus Torvalds 19 December 2015, 18:05:00 UTC Merge tag 'gpio-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Some GPIO fixes for the v4.4 series. Most prominent: I revert the error propagation from the .get() function until we can fix up all the drivers properly for v4.5. - Revert the error number propagation from the .get() vtable entry temporarily, until we make the proper fixes to all drivers. - Fix the clamping behaviour in the generic GPIO driver. - Driver fix for the ath79 driver" * tag 'gpio-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: revert get() to non-errorprogating behaviour gpio: generic: clamp values from bgpio_get_set() gpio: ath79: Fix the logic to clear offset bit of AR71XX_GPIO_REG_OE register 19 December 2015, 18:05:00 UTC
38beb96 Linus Torvalds 19 December 2015, 18:01:03 UTC Merge tag 'pinctrl-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Driver fixes for Freescale i.MX7D, Intel, Broadcom 2835 - One MAINTAINERS entry * tag 'pinctrl-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: MAINTAINERS: pinctrl: Add maintainers for pinctrl-single pinctrl: bcm2835: Fix initial value for direction_output pinctrl: intel: fix offset calculation issue of register PAD_OWN pinctrl: intel: fix bug of register offset calculation pinctrl: freescale: add ZERO_OFFSET_VALID flag for vf610 pinctrl 19 December 2015, 18:01:03 UTC
d7d3d84 Linus Torvalds 19 December 2015, 17:52:44 UTC Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "A set of 'usual' driver bugfixes for the I2C subsystem" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: rcar: disable runtime PM correctly in slave mode i2c: designware: Keep pm_runtime_enable/_disable calls in sync i2c: designware: fix IO timeout issue for AMD controller i2c: imx: init bus recovery info before adding i2c adapter i2c: do not use 0x in front of %pa i2c: davinci: Increase module clock frequency i2c: mv64xxx: The n clockdiv factor is 0 based on sunxi SoCs i2c: rk3x: populate correct variable for sda_falling_time 19 December 2015, 17:52:44 UTC
632f857 Linus Torvalds 19 December 2015, 17:51:11 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a few assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elants_i2c - fix wake-on-touch Input: elan_i2c - set input device's vendor and product IDs Input: sun4i-lradc-keys - fix typo in binding documentation Input: atmel_mxt_ts - add maxtouch to I2C table for module autoload Input: arizona-haptic - fix disabling of haptics device Input: aiptek - fix crash on detecting device without endpoints Input: atmel_mxt_ts - add generic platform data for Chromebooks Input: parkbd - clear unused function pointers Input: walkera0701 - clear unused function pointers Input: turbografx - clear unused function pointers Input: gamecon - clear unused function pointers Input: db9 - clear unused function pointers 19 December 2015, 17:51:11 UTC
b4cd08a Wolfram Sang 16 December 2015, 19:05:18 UTC i2c: rcar: disable runtime PM correctly in slave mode When we also are I2C slave, we need to disable runtime PM because the address detection mechanism needs to be active all the time. However, we can reenable runtime PM once the slave instance was unregistered. So, use pm_runtime_get_sync/put to achieve this, since it has proper refcounting. pm_runtime_allow/forbid is like a global knob controllable from userspace which is unsuitable here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org 19 December 2015, 11:00:37 UTC
1eab0e4 Linus Torvalds 19 December 2015, 05:01:35 UTC Merge tag 'pm+acpi-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a potential regression introduced during the 4.3 cycle (generic power domains framework), a nasty bug that has been present forever (power capping RAPL driver), a build issue (Tegra cpufreq driver) and a minor ugliness introduced recently (intel_pstate). Specifics: - Fix a potential regression in the generic power domains framework introduced during the 4.3 development cycle that may lead to spurious failures of system suspend in certain situations (Ulf Hansson). - Fix a problem in the power capping RAPL (Running Average Power Limits) driver that causes it to initialize successfully on some systems where it is not supposed to do that which is due to an incorrect check in an initialization routine (Prarit Bhargava). - Fix a build problem in the cpufreq Tegra driver that depends on the regulator framework, but that dependency is not reflected in Kconfig (Arnd Bergmann). - Fix a recent mistake in the intel_pstate driver where a numeric constant is used directly instead of a symbol defined specifically for the case in question (Prarit Bhargava)" * tag 'pm+acpi-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap / RAPL: fix BIOS lock check cpufreq: intel_pstate: Minor cleanup for FRAC_BITS cpufreq: tegra: add regulator dependency for T124 PM / Domains: Allow runtime PM callbacks to be re-used during system PM 19 December 2015, 05:01:35 UTC
4fee35a Linus Torvalds 19 December 2015, 04:35:35 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three fixes this time, two in SES picked up by KASAN for various types of buffer overrun. The first is a USB array which returns page 8 whatever is asked for and causes us to overrun with incorrect data format assumptions and the second is an invalid iteration of page 10 (the additional information page). The final fix is a reversion of a NULL deref fix which caused suspend/resume not to be called in pairs leading to incorrect device operation (Jens has queued a more proper fix for the problem in block)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: ses: fix additional element traversal bug Revert "SCSI: Fix NULL pointer dereference in runtime PM" ses: Fix problems with simple enclosures 19 December 2015, 04:35:35 UTC
478e5ed James Chen 18 December 2015, 23:51:48 UTC Input: elants_i2c - fix wake-on-touch When sending "SLEEP" command to the controller it ceases scanning completely and is unable to wake the system up from sleep, so if it is configured as a wakeup source we should simply configure interrupt for wakeup and rely on idle logic within the controller to reduce power consumption while it is not used. Signed-off-by: James Chen <james.chen@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 19 December 2015, 00:21:43 UTC
76b8ebd Linus Torvalds 18 December 2015, 23:41:35 UTC Merge tag 'media/v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab. * tag 'media/v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] airspy: increase USB control message buffer size [media] hackrf: move RF gain ctrl enable behind module parameter [media] hackrf: fix possible null ptr on debug printing [media] Revert "[media] ivtv: avoid going past input/audio array" 18 December 2015, 23:41:35 UTC
fc315e3 Linus Torvalds 18 December 2015, 23:35:08 UTC Merge branch 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "A couple of small fixes" * 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: check prepare_uptodate_page() error code earlier Btrfs: check for empty bitmap list in setup_cluster_bitmaps btrfs: fix misleading warning when space cache failed to load Btrfs: fix transaction handle leak in balance Btrfs: fix unprotected list move from unused_bgs to deleted_bgs list 18 December 2015, 23:35:08 UTC
8b4414f Linus Torvalds 18 December 2015, 22:25:57 UTC Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "Three patches" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: include/linux/mmdebug.h: should include linux/bug.h mm/zswap: change incorrect strncmp use to strcmp proc: fix -ESRCH error when writing to /proc/$pid/coredump_filter 18 December 2015, 22:25:57 UTC
1d5cda4 James Morse 18 December 2015, 22:22:07 UTC include/linux/mmdebug.h: should include linux/bug.h mmdebug.h uses BUILD_BUG_ON_INVALID(), assuming someone else included linux/bug.h. Include it ourselves. This saves build-failures such as: arch/arm64/include/asm/pgtable.h: In function 'set_pte_at': arch/arm64/include/asm/pgtable.h:281:3: error: implicit declaration of function 'BUILD_BUG_ON_INVALID' [-Werror=implicit-function-declaration] VM_WARN_ONCE(!pte_young(pte), Fixes: 02602a18c32d7 ("bug: completely remove code generated by disabled VM_BUG_ON()") Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 December 2015, 22:25:40 UTC
8bc8b22 Dan Streetman 18 December 2015, 22:22:04 UTC mm/zswap: change incorrect strncmp use to strcmp Change the use of strncmp in zswap_pool_find_get() to strcmp. The use of strncmp is no longer correct, now that zswap_zpool_type is not an array; sizeof() will return the size of a pointer, which isn't the right length to compare. We don't need to use strncmp anyway, because the existing params and the passed in params are all guaranteed to be null terminated, so strcmp should be used. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Reported-by: Weijie Yang <weijie.yang@samsung.com> Cc: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 December 2015, 22:25:40 UTC
41a0c24 Colin Ian King 18 December 2015, 22:22:01 UTC proc: fix -ESRCH error when writing to /proc/$pid/coredump_filter Writing to /proc/$pid/coredump_filter always returns -ESRCH because commit 774636e19ed51 ("proc: convert to kstrto*()/kstrto*_from_user()") removed the setting of ret after the get_proc_task call and incorrectly left it as -ESRCH. Instead, return 0 when successful. Example breakage: echo 0 > /proc/self/coredump_filter bash: echo: write error: No such process Fixes: 774636e19ed51 ("proc: convert to kstrto*()/kstrto*_from_user()") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> [4.3+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 December 2015, 22:25:40 UTC
65d70e7 Linus Torvalds 18 December 2015, 20:51:52 UTC Merge tag 'hwmon-for-linus-v4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Select CONFIG_BITREVERSE for sht15 driver to avoid build failure if it is not configured. - Force wait for conversion time for the first valid data in tmp102 driver to avoid reporting erroneous data to the thermal subsystem. * tag 'hwmon-for-linus-v4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (sht15) Select CONFIG_BITREVERSE hwmon: (tmp102) Force wait for conversion time for the first valid data 18 December 2015, 20:51:52 UTC
ccdd96b Linus Torvalds 18 December 2015, 20:38:35 UTC Merge tag 'iommu-fixes-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "Two similar fixes for the Intel and AMD IOMMU drivers to add proper access checks before calling handle_mm_fault" * tag 'iommu-fixes-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Do access checks before calling handle_mm_fault() iommu/amd: Do proper access checking before calling handle_mm_fault() 18 December 2015, 20:38:35 UTC
3273cba Linus Torvalds 18 December 2015, 20:24:52 UTC Merge tag 'for-linus-4.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel: - XSA-155 security fixes to backend drivers. - XSA-157 security fixes to pciback. * tag 'for-linus-4.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-pciback: fix up cleanup path when alloc fails xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set. xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled. xen/pciback: Do not install an IRQ handler for MSI interrupts. xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled xen/pciback: Save xen_pci_op commands before processing it xen-scsiback: safely copy requests xen-blkback: read from indirect descriptors only once xen-blkback: only read request operation from shared ring once xen-netback: use RING_COPY_REQUEST() throughout xen-netback: don't use last request to determine minimum Tx credit xen: Add RING_COPY_REQUEST() xen/x86/pvh: Use HVM's flush_tlb_others op xen: Resume PMU from non-atomic context xen/events/fifo: Consume unprocessed events when a CPU dies 18 December 2015, 20:24:52 UTC
83ad283 Linus Torvalds 18 December 2015, 20:19:01 UTC Merge tag 'arc-fixes-for-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC architecture fixes from Vineet Gupta: "Fixes for: - perf interrupts on SMP: Not enabled (at boot) and disabled (at runtime) - stack unwinder regression (for modules, ignoring dwarf3) - nsim hosed for non default kernel link base builds" * tag 'arc-fixes-for-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: smp: Rename platform hook @init_cpu_smp -> @init_per_cpu ARC: rename smp operation init_irq_cpu() to init_per_cpu() ARC: dw2 unwind: Ignore CIE version !=1 gracefully instead of bailing ARC: dw2 unwind: Reinstante unwinding out of modules ARC: [plat-sim] unbork non default CONFIG_LINUX_LINK_BASE ARC: intc: Document arc_request_percpu_irq() better ARCv2: perf: Ensure perf intr gets enabled on all cores ARC: intc: No need to clear IRQ_NOAUTOEN ARCv2: intc: Fix random perf irq disabling in SMP setup ARC: [axs10x] cap ethernet phy to 100 Mbit/sec 18 December 2015, 20:19:01 UTC
7b61225 Linus Torvalds 18 December 2015, 19:47:06 UTC Merge tag 'sound-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "As usual in rc6, this update contains only a few HD-audio and USB-audio device-specific quirks: yet another Thinkpad noise fixes, Dell headphone mic fixes, and AudioQuest DragonFly fixes" * tag 'sound-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add a fixup for Thinkpad X1 Carbon 2nd ALSA: hda - Set codec to D3 at reboot/shutdown on Thinkpads ALSA: hda - Apply click noise workaround for Thinkpads generically ALSA: hda - Fix headphone mic input on a few Dell ALC293 machines ALSA: usb-audio: Add sample rate inquiry quirk for AudioQuest DragonFly ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly 18 December 2015, 19:47:06 UTC
19c5224 Linus Torvalds 18 December 2015, 19:19:16 UTC Merge tag 'for-linus-20151217' of git://git.infradead.org/linux-mtd Pull MTD fixes from Brian Norris: "I was holding out on this pull request for a bit, since there are a few other small issues being discussed that look like 4.4-rc regressions. Hopefully I can get those stabilized soon, but these are ready at any rate: - A little bit of a last-minute change for the device tree "fixed partition" binding. This is needed because we might want to reuse the 'partitions' subnode for other sorts of partitioning descriptions -- e.g., for describing which on-flash partition format(s) might be used on the system. - Also tone down a warning message, since it is probably going to show up on a lot of systems where it should just be ignored" * tag 'for-linus-20151217' of git://git.infradead.org/linux-mtd: doc: dt: mtd: partitions: add compatible property to "partitions" node mtd: ofpart: don't complain about missing 'partitions' node too loudly 18 December 2015, 19:19:16 UTC
e50293e Alan Stern 16 December 2015, 18:32:38 UTC USB: fix invalid memory access in hub_activate() Commit 8520f38099cc ("USB: change hub initialization sleeps to delayed_work") changed the hub_activate() routine to make part of it run in a workqueue. However, the commit failed to take a reference to the usb_hub structure or to lock the hub interface while doing so. As a result, if a hub is plugged in and quickly unplugged before the work routine can run, the routine will try to access memory that has been deallocated. Or, if the hub is unplugged while the routine is running, the memory may be deallocated while it is in active use. This patch fixes the problem by taking a reference to the usb_hub at the start of hub_activate() and releasing it at the end (when the work is finished), and by locking the hub interface while the work routine is running. It also adds a check at the start of the routine to see if the hub has already been disconnected, in which nothing should be done. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Alexandru Cornea <alexandru.cornea@intel.com> Tested-by: Alexandru Cornea <alexandru.cornea@intel.com> Fixes: 8520f38099cc ("USB: change hub initialization sleeps to delayed_work") CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 18 December 2015, 17:30:34 UTC
abdc9a3 Dan Carpenter 16 December 2015, 11:06:37 UTC USB: ipaq.c: fix a timeout loop The code expects the loop to end with "retries" set to zero but, because it is a post-op, it will end set to -1. I have fixed this by moving the decrement inside the loop. Fixes: 014aa2a3c32e ('USB: ipaq: minor ipaq_open() cleanup.') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 18 December 2015, 17:30:34 UTC
aa0850e Antti Palosaari 26 October 2015, 20:58:14 UTC [media] airspy: increase USB control message buffer size Driver requested device firmware version string during probe using only 24 byte long buffer. That buffer is too small for newer firmware versions, which causes device firmware hang - device stops responding to any commands after that. Increase buffer size to 128 which should be enough for any current and future version strings. Link: https://github.com/airspy/host/issues/27 Cc: <stable@vger.kernel.org> # 3.17+ Reported-by: Benjamin Vernoux <bvernoux@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> 18 December 2015, 17:25:29 UTC
d47fa53 Antti Palosaari 23 October 2015, 22:01:31 UTC [media] hackrf: move RF gain ctrl enable behind module parameter Used Avago MGA-81563 RF amplifier could be destroyed pretty easily with too strong signal or transmitting to bad antenna. Add module parameter 'enable_rf_gain_ctrl' which allows enabling RF gain control - otherwise, default without the module parameter, RF gain control is set to 'grabbed' state which prevents setting value to the control. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> 18 December 2015, 17:25:29 UTC
eb35cf4 Antti Palosaari 21 October 2015, 21:02:41 UTC [media] hackrf: fix possible null ptr on debug printing drivers/media/usb/hackrf/hackrf.c:1533 hackrf_probe() error: we previously assumed 'dev' could be null (see line 1366) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> 18 December 2015, 17:25:29 UTC
dfcf36d Mauro Carvalho Chehab 11 November 2015, 11:22:36 UTC [media] Revert "[media] ivtv: avoid going past input/audio array" This patch broke ivtv logic, as reported at https://bugzilla.redhat.com/show_bug.cgi?id=1278942 This reverts commit 09290cc885937cab3b2d60a6d48fe3d2d3e04061. Cc: stable@vger.kernel.org # for v4.1 and upper Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> 18 December 2015, 17:25:29 UTC
fabb1c3 Greg Kroah-Hartman 18 December 2015, 17:24:50 UTC Merge tag 'phy-for-4.4-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 4.4 -rc *) Add missing of_node_put in a bunch of PHY drivers *) Add get_device in devm_of_phy_get_by_index() *) Fix randconfig build error in sun9i usb driver 18 December 2015, 17:24:50 UTC
584a561 Doug Goldstein 26 November 2015, 20:32:39 UTC xen-pciback: fix up cleanup path when alloc fails When allocating a pciback device fails, clear the private field. This could lead to an use-after free, however the 'really_probe' takes care of setting dev_set_drvdata(dev, NULL) in its failure path (which we would exercise if the ->probe function failed), so we we are OK. However lets be defensive as the code can change. Going forward we should clean up the pci_set_drvdata(dev, NULL) in the various code-base. That will be for another day. Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reported-by: Jonathan Creekmore <jonathan.creekmore@gmail.com> Signed-off-by: Doug Goldstein <cardoe@cardoe.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 18 December 2015, 16:38:48 UTC
a3a316c Arnd Bergmann 18 December 2015, 14:52:28 UTC hwmon: (sht15) Select CONFIG_BITREVERSE If CONFIG_BITREVERSE is not built-in, the sht15 driver fails to link: drivers/built-in.o: In function `sht15_crc8': drivers/hwmon/sht15.c:195: undefined reference to `byte_rev_table' This adds a Kconfig 'select' statement, like all other users of bitrev.h have it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 33836ee98533 ("hwmon:change sht15_reverse()") Signed-off-by: Guenter Roeck <linux@roeck-us.net> 18 December 2015, 16:19:52 UTC
408fb0e Konrad Rzeszutek Wilk 02 November 2015, 23:13:27 UTC xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set. commit f598282f51 ("PCI: Fix the NIU MSI-X problem in a better way") teaches us that dealing with MSI-X can be troublesome. Further checks in the MSI-X architecture shows that if the PCI_COMMAND_MEMORY bit is turned of in the PCI_COMMAND we may not be able to access the BAR (since they are memory regions). Since the MSI-X tables are located in there.. that can lead to us causing PCIe errors. Inhibit us performing any operation on the MSI-X unless the MEMORY bit is set. Note that Xen hypervisor with: "x86/MSI-X: access MSI-X table only after having enabled MSI-X" will return: xen_pciback: 0000:0a:00.1: error -6 enabling MSI-X for guest 3! When the generic MSI code tries to setup the PIRQ without MEMORY bit set. Which means with later versions of Xen (4.6) this patch is not neccessary. This is part of XSA-157 CC: stable@vger.kernel.org Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 18 December 2015, 15:48:39 UTC
7cfb905 Konrad Rzeszutek Wilk 01 April 2015, 14:49:47 UTC xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled. Otherwise just continue on, returning the same values as previously (return of 0, and op->result has the PIRQ value). This does not change the behavior of XEN_PCI_OP_disable_msi[|x]. The pci_disable_msi or pci_disable_msix have the checks for msi_enabled or msix_enabled so they will error out immediately. However the guest can still call these operations and cause us to disable the 'ack_intr'. That means the backend IRQ handler for the legacy interrupt will not respond to interrupts anymore. This will lead to (if the device is causing an interrupt storm) for the Linux generic code to disable the interrupt line. Naturally this will only happen if the device in question is plugged in on the motherboard on shared level interrupt GSI. This is part of XSA-157 CC: stable@vger.kernel.org Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 18 December 2015, 15:48:37 UTC
a396f3a Konrad Rzeszutek Wilk 02 November 2015, 22:24:08 UTC xen/pciback: Do not install an IRQ handler for MSI interrupts. Otherwise an guest can subvert the generic MSI code to trigger an BUG_ON condition during MSI interrupt freeing: for (i = 0; i < entry->nvec_used; i++) BUG_ON(irq_has_action(entry->irq + i)); Xen PCI backed installs an IRQ handler (request_irq) for the dev->irq whenever the guest writes PCI_COMMAND_MEMORY (or PCI_COMMAND_IO) to the PCI_COMMAND register. This is done in case the device has legacy interrupts the GSI line is shared by the backend devices. To subvert the backend the guest needs to make the backend to change the dev->irq from the GSI to the MSI interrupt line, make the backend allocate an interrupt handler, and then command the backend to free the MSI interrupt and hit the BUG_ON. Since the backend only calls 'request_irq' when the guest writes to the PCI_COMMAND register the guest needs to call XEN_PCI_OP_enable_msi before any other operation. This will cause the generic MSI code to setup an MSI entry and populate dev->irq with the new PIRQ value. Then the guest can write to PCI_COMMAND PCI_COMMAND_MEMORY and cause the backend to setup an IRQ handler for dev->irq (which instead of the GSI value has the MSI pirq). See 'xen_pcibk_control_isr'. Then the guest disables the MSI: XEN_PCI_OP_disable_msi which ends up triggering the BUG_ON condition in 'free_msi_irqs' as there is an IRQ handler for the entry->irq (dev->irq). Note that this cannot be done using MSI-X as the generic code does not over-write dev->irq with the MSI-X PIRQ values. The patch inhibits setting up the IRQ handler if MSI or MSI-X (for symmetry reasons) code had been called successfully. P.S. Xen PCIBack when it sets up the device for the guest consumption ends up writting 0 to the PCI_COMMAND (see xen_pcibk_reset_device). XSA-120 addendum patch removed that - however when upstreaming said addendum we found that it caused issues with qemu upstream. That has now been fixed in qemu upstream. This is part of XSA-157 CC: stable@vger.kernel.org Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 18 December 2015, 15:48:34 UTC
5e0ce14 Konrad Rzeszutek Wilk 02 November 2015, 23:07:44 UTC xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled The guest sequence of: a) XEN_PCI_OP_enable_msix b) XEN_PCI_OP_enable_msix results in hitting an NULL pointer due to using freed pointers. The device passed in the guest MUST have MSI-X capability. The a) constructs and SysFS representation of MSI and MSI groups. The b) adds a second set of them but adding in to SysFS fails (duplicate entry). 'populate_msi_sysfs' frees the newly allocated msi_irq_groups (note that in a) pdev->msi_irq_groups is still set) and also free's ALL of the MSI-X entries of the device (the ones allocated in step a) and b)). The unwind code: 'free_msi_irqs' deletes all the entries and tries to delete the pdev->msi_irq_groups (which hasn't been set to NULL). However the pointers in the SysFS are already freed and we hit an NULL pointer further on when 'strlen' is attempted on a freed pointer. The patch adds a simple check in the XEN_PCI_OP_enable_msix to guard against that. The check for msi_enabled is not stricly neccessary. This is part of XSA-157 CC: stable@vger.kernel.org Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 18 December 2015, 15:48:29 UTC
56441f3 Konrad Rzeszutek Wilk 03 April 2015, 15:08:22 UTC xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled The guest sequence of: a) XEN_PCI_OP_enable_msi b) XEN_PCI_OP_enable_msi c) XEN_PCI_OP_disable_msi results in hitting an BUG_ON condition in the msi.c code. The MSI code uses an dev->msi_list to which it adds MSI entries. Under the above conditions an BUG_ON() can be hit. The device passed in the guest MUST have MSI capability. The a) adds the entry to the dev->msi_list and sets msi_enabled. The b) adds a second entry but adding in to SysFS fails (duplicate entry) and deletes all of the entries from msi_list and returns (with msi_enabled is still set). c) pci_disable_msi passes the msi_enabled checks and hits: BUG_ON(list_empty(dev_to_msi_list(&dev->dev))); and blows up. The patch adds a simple check in the XEN_PCI_OP_enable_msi to guard against that. The check for msix_enabled is not stricly neccessary. This is part of XSA-157. CC: stable@vger.kernel.org Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 18 December 2015, 15:48:19 UTC
8135cf8 Konrad Rzeszutek Wilk 16 November 2015, 17:40:48 UTC xen/pciback: Save xen_pci_op commands before processing it Double fetch vulnerabilities that happen when a variable is fetched twice from shared memory but a security check is only performed the first time. The xen_pcibk_do_op function performs a switch statements on the op->cmd value which is stored in shared memory. Interestingly this can result in a double fetch vulnerability depending on the performed compiler optimization. This patch fixes it by saving the xen_pci_op command before processing it. We also use 'barrier' to make sure that the compiler does not perform any optimization. This is part of XSA155. CC: stable@vger.kernel.org Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 18 December 2015, 15:00:47 UTC
be69746 David Vrabel 16 November 2015, 18:02:32 UTC xen-scsiback: safely copy requests The copy of the ring request was lacking a following barrier(), potentially allowing the compiler to optimize the copy away. Use RING_COPY_REQUEST() to ensure the request is copied to local memory. This is part of XSA155. CC: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 18 December 2015, 15:00:41 UTC
1877914 Roger Pau Monné 03 November 2015, 16:40:43 UTC xen-blkback: read from indirect descriptors only once Since indirect descriptors are in memory shared with the frontend, the frontend could alter the first_sect and last_sect values after they have been validated but before they are recorded in the request. This may result in I/O requests that overflow the foreign page, possibly overwriting local pages when the I/O request is executed. When parsing indirect descriptors, only read first_sect and last_sect once. This is part of XSA155. CC: stable@vger.kernel.org Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 18 December 2015, 15:00:37 UTC
1f13d75 Roger Pau Monné 03 November 2015, 16:34:09 UTC xen-blkback: only read request operation from shared ring once A compiler may load a switch statement value multiple times, which could be bad when the value is in memory shared with the frontend. When converting a non-native request to a native one, ensure that src->operation is only loaded once by using READ_ONCE(). This is part of XSA155. CC: stable@vger.kernel.org Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 18 December 2015, 15:00:32 UTC
68a33bf David Vrabel 30 October 2015, 15:17:06 UTC xen-netback: use RING_COPY_REQUEST() throughout Instead of open-coding memcpy()s and directly accessing Tx and Rx requests, use the new RING_COPY_REQUEST() that ensures the local copy is correct. This is more than is strictly necessary for guest Rx requests since only the id and gref fields are used and it is harmless if the frontend modifies these. This is part of XSA155. CC: stable@vger.kernel.org Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 18 December 2015, 15:00:28 UTC
0f58996 David Vrabel 30 October 2015, 15:16:01 UTC xen-netback: don't use last request to determine minimum Tx credit The last from guest transmitted request gives no indication about the minimum amount of credit that the guest might need to send a packet since the last packet might have been a small one. Instead allow for the worst case 128 KiB packet. This is part of XSA155. CC: stable@vger.kernel.org Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 18 December 2015, 15:00:23 UTC
454d5d8 David Vrabel 30 October 2015, 14:58:08 UTC xen: Add RING_COPY_REQUEST() Using RING_GET_REQUEST() on a shared ring is easy to use incorrectly (i.e., by not considering that the other end may alter the data in the shared ring while it is being inspected). Safe usage of a request generally requires taking a local copy. Provide a RING_COPY_REQUEST() macro to use instead of RING_GET_REQUEST() and an open-coded memcpy(). This takes care of ensuring that the copy is done correctly regardless of any possible compiler optimizations. Use a volatile source to prevent the compiler from reordering or omitting the copy. This is part of XSA155. CC: stable@vger.kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 18 December 2015, 15:00:17 UTC
036592f Alistair Popple 18 December 2015, 06:16:17 UTC powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion" Commit 25642e1459ac ("powerpc/opal-irqchip: Fix double endian conversion") fixed an endian bug by calling opal_handle_events() in opal_event_unmask(). However this introduced a deadlock if we find an event is active during unmasking and call opal_handle_events() again. The bad call sequence is: opal_interrupt() -> opal_handle_events() -> generic_handle_irq() -> handle_level_irq() -> raw_spin_lock(&desc->lock) handle_irq_event(desc) unmask_irq(desc) -> opal_event_unmask() -> opal_handle_events() -> generic_handle_irq() -> handle_level_irq() -> raw_spin_lock(&desc->lock) (BOOM) When generating multiple opal events in quick succession this would lead to the following stall warnings: EEH: Fenced PHB#0 detected, location: U78C9.001.WZS09XA-P1-C32 INFO: rcu_sched detected stalls on CPUs/tasks: 12-...: (1 GPs behind) idle=68f/140000000000001/0 softirq=860/861 fqs=2065 15-...: (1 GPs behind) idle=be5/140000000000001/0 softirq=1142/1143 fqs=2065 (detected by 13, t=2102 jiffies, g=1325, c=1324, q=602) NMI watchdog: BUG: soft lockup - CPU#18 stuck for 22s! [irqbalance:2696] INFO: rcu_sched detected stalls on CPUs/tasks: 12-...: (1 GPs behind) idle=68f/140000000000001/0 softirq=860/861 fqs=8371 15-...: (1 GPs behind) idle=be5/140000000000001/0 softirq=1142/1143 fqs=8371 (detected by 20, t=8407 jiffies, g=1325, c=1324, q=1290) This patch corrects the problem by queuing the work if an event is active during unmasking, which is similar to the pre-endian fix behaviour. Fixes: 25642e1459ac ("powerpc/opal-irqchip: Fix double endian conversion") Signed-off-by: Alistair Popple <alistair@popple.id.au> Reported-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 18 December 2015, 11:24:15 UTC
cb01c54 Goldwyn Rodrigues 18 December 2015, 04:19:16 UTC Fix remove_and_add_spares removes drive added as spare in slot_store Commit 2910ff17d154baa5eb50e362a91104e831eb2bb6 introduced a regression which would remove a recently added spare via slot_store. Revert part of the patch which touches slot_store() and add the disk directly using pers->hot_add_disk() Fixes: 2910ff17d154 ("md: remove_and_add_spares() to activate specific rdev") Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com> Signed-off-by: NeilBrown <neilb@suse.com> 18 December 2015, 04:19:16 UTC
0dc10e5 Mikulas Patocka 18 December 2015, 04:19:16 UTC md: fix bug due to nested suspend The patch c7bfced9a6716ff66c9d61f934bb60af08d4688c committed to 4.4-rc causes crash in LVM test shell/lvchange-raid.sh. The kernel crashes with this BUG, the reason is that we attempt to suspend a device that is already suspended. See also https://bugzilla.redhat.com/show_bug.cgi?id=1283491 This patch fixes the bug by changing functions mddev_suspend and mddev_resume to always nest. The number of nested calls to mddev_nested_suspend is kept in the variable mddev->suspended. [neilb: made mddev_suspend() always nest instead of introduce mddev_nested_suspend] kernel BUG at drivers/md/md.c:317! CPU: 3 PID: 32754 Comm: lvm Not tainted 4.4.0-rc2 #1 task: 0000000047076040 ti: 0000000047014000 task.ti: 0000000047014000 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001000000000000001111 Not tainted r00-03 000000000804000f 00000000102c5280 0000000010c7522c 000000007e3d1810 r04-07 0000000010c6f000 000000004ef37f20 000000007e3d1dd0 000000007e3d1810 r08-11 000000007c9f1600 0000000000000000 0000000000000001 ffffffffffffffff r12-15 0000000010c1d000 0000000000000041 00000000f98d63c8 00000000f98e49e4 r16-19 00000000f98e49e4 00000000c138fd06 00000000f98d63c8 0000000000000001 r20-23 0000000000000002 000000004ef37f00 00000000000000b0 00000000000001d1 r24-27 00000000424783a0 000000007e3d1dd0 000000007e3d1810 00000000102b2000 r28-31 0000000000000001 0000000047014840 0000000047014930 0000000000000001 sr00-03 0000000007040800 0000000000000000 0000000000000000 0000000007040800 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000102c538c 00000000102c5390 IIR: 03ffe01f ISR: 0000000000000000 IOR: 00000000102b2748 CPU: 3 CR30: 0000000047014000 CR31: 0000000000000000 ORIG_R28: 00000000000000b0 IAOQ[0]: mddev_suspend+0x10c/0x160 [md_mod] IAOQ[1]: mddev_suspend+0x110/0x160 [md_mod] RP(r2): raid1_add_disk+0xd4/0x2c0 [raid1] Backtrace: [<0000000010c7522c>] raid1_add_disk+0xd4/0x2c0 [raid1] [<0000000010c20078>] raid_resume+0x390/0x418 [dm_raid] [<00000000105833e8>] dm_table_resume_targets+0xc0/0x188 [dm_mod] [<000000001057f784>] dm_resume+0x144/0x1e0 [dm_mod] [<0000000010587dd4>] dev_suspend+0x1e4/0x568 [dm_mod] [<0000000010589278>] ctl_ioctl+0x1e8/0x428 [dm_mod] [<0000000010589518>] dm_compat_ctl_ioctl+0x18/0x68 [dm_mod] [<0000000040377b88>] compat_SyS_ioctl+0xd0/0x1558 Fixes: c7bfced9a671 ("md: suspend i/o during runtime blk_integrity_unregister") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com> 18 December 2015, 04:19:16 UTC
9b15603 Shaohua Li 18 December 2015, 04:19:16 UTC MD: change journal disk role to disk 0 Neil pointed out setting journal disk role to raid_disks will confuse reshape if we support reshape eventually. Switching the role to 0 (we should be fine as long as the value >=0) and skip sysfs file creation to avoid error. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.com> 18 December 2015, 04:19:16 UTC
cc57858 Artur Paszkiewicz 18 December 2015, 04:19:16 UTC md/raid10: fix data corruption and crash during resync The commit c31df25f20e3 ("md/raid10: make sync_request_write() call bio_copy_data()") replaced manual data copying with bio_copy_data() but it doesn't work as intended. The source bio (fbio) is already processed, so its bvec_iter has bi_size == 0 and bi_idx == bi_vcnt. Because of this, bio_copy_data() either does not copy anything, or worse, copies data from the ->bi_next bio if it is set. This causes wrong data to be written to drives during resync and sometimes lockups/crashes in bio_copy_data(): [ 517.338478] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [md126_raid10:3319] [ 517.347324] Modules linked in: raid10 xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter ip_tables x86_pkg_temp_thermal coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul cryptd shpchp pcspkr ipmi_si ipmi_msghandler tpm_crb acpi_power_meter acpi_cpufreq ext4 mbcache jbd2 sr_mod cdrom sd_mod e1000e ax88179_178a usbnet mii ahci ata_generic crc32c_intel libahci ptp pata_acpi libata pps_core wmi sunrpc dm_mirror dm_region_hash dm_log dm_mod [ 517.440555] CPU: 0 PID: 3319 Comm: md126_raid10 Not tainted 4.3.0-rc6+ #1 [ 517.448384] Hardware name: Intel Corporation PURLEY/PURLEY, BIOS PLYDCRB1.86B.0055.D14.1509221924 09/22/2015 [ 517.459768] task: ffff880153773980 ti: ffff880150df8000 task.ti: ffff880150df8000 [ 517.468529] RIP: 0010:[<ffffffff812e1888>] [<ffffffff812e1888>] bio_copy_data+0xc8/0x3c0 [ 517.478164] RSP: 0018:ffff880150dfbc98 EFLAGS: 00000246 [ 517.484341] RAX: ffff880169356688 RBX: 0000000000001000 RCX: 0000000000000000 [ 517.492558] RDX: 0000000000000000 RSI: ffffea0001ac2980 RDI: ffffea0000d835c0 [ 517.500773] RBP: ffff880150dfbd08 R08: 0000000000000001 R09: ffff880153773980 [ 517.508987] R10: ffff880169356600 R11: 0000000000001000 R12: 0000000000010000 [ 517.517199] R13: 000000000000e000 R14: 0000000000000000 R15: 0000000000001000 [ 517.525412] FS: 0000000000000000(0000) GS:ffff880174a00000(0000) knlGS:0000000000000000 [ 517.534844] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 517.541507] CR2: 00007f8a044d5fed CR3: 0000000169504000 CR4: 00000000001406f0 [ 517.549722] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 517.557929] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 517.566144] Stack: [ 517.568626] ffff880174a16bc0 ffff880153773980 ffff880169356600 0000000000000000 [ 517.577659] 0000000000000001 0000000000000001 ffff880153773980 ffff88016a61a800 [ 517.586715] ffff880150dfbcf8 0000000000000001 ffff88016dd209e0 0000000000001000 [ 517.595773] Call Trace: [ 517.598747] [<ffffffffa043ef95>] raid10d+0xfc5/0x1690 [raid10] [ 517.605610] [<ffffffff816697ae>] ? __schedule+0x29e/0x8e2 [ 517.611987] [<ffffffff814ff206>] md_thread+0x106/0x140 [ 517.618072] [<ffffffff810c1d80>] ? wait_woken+0x80/0x80 [ 517.624252] [<ffffffff814ff100>] ? super_1_load+0x520/0x520 [ 517.630817] [<ffffffff8109ef89>] kthread+0xc9/0xe0 [ 517.636506] [<ffffffff8109eec0>] ? flush_kthread_worker+0x70/0x70 [ 517.643653] [<ffffffff8166d99f>] ret_from_fork+0x3f/0x70 [ 517.649929] [<ffffffff8109eec0>] ? flush_kthread_worker+0x70/0x70 Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Reviewed-by: Shaohua Li <shli@kernel.org> Cc: stable@vger.kernel.org (v4.2+) Fixes: c31df25f20e3 ("md/raid10: make sync_request_write() call bio_copy_data()") Signed-off-by: NeilBrown <neilb@suse.com> 18 December 2015, 04:19:16 UTC
73796d8 Linus Torvalds 17 December 2015, 22:05:22 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix uninitialized variable warnings in nfnetlink_queue, a lot of people reported this... From Arnd Bergmann. 2) Don't init mutex twice in i40e driver, from Jesse Brandeburg. 3) Fix spurious EBUSY in rhashtable, from Herbert Xu. 4) Missing DMA unmaps in mvpp2 driver, from Marcin Wojtas. 5) Fix race with work structure access in pppoe driver causing corruptions, from Guillaume Nault. 6) Fix OOPS due to sh_eth_rx() not checking whether netdev_alloc_skb() actually succeeded or not, from Sergei Shtylyov. 7) Don't lose flags when settifn IFA_F_OPTIMISTIC in ipv6 code, from Bjørn Mork. 8) VXLAN_HD_RCO defined incorrectly, fix from Jiri Benc. 9) Fix clock source used for cookies in SCTP, from Marcelo Ricardo Leitner. 10) aurora driver needs HAS_DMA dependency, from Geert Uytterhoeven. 11) ndo_fill_metadata_dst op of vxlan has to handle ipv6 tunneling properly as well, from Jiri Benc. 12) Handle request sockets properly in xfrm layer, from Eric Dumazet. 13) Double stats update in ipv6 geneve transmit path, fix from Pravin B Shelar. 14) sk->sk_policy[] needs RCU protection, and as a result xfrm_policy_destroy() needs to free policies using an RCU grace period, from Eric Dumazet. 15) SCTP needs to clone ipv6 tx options in order to avoid use after free, from Eric Dumazet. 16) Missing kbuild export if ila.h, from Stephen Hemminger. 17) Missing mdiobus_alloc() return value checking in mdio-mux.c, from Tobias Klauser. 18) Validate protocol value range in ->create() methods, from Hannes Frederic Sowa. 19) Fix early socket demux races that result in illegal dst reuse, from Eric Dumazet. 20) Validate socket address length in pptp code, from WANG Cong. 21) skb_reorder_vlan_header() uses incorrect offset and can corrupt packets, from Vlad Yasevich. 22) Fix memory leaks in nl80211 registry code, from Ola Olsson. 23) Timeout loop count handing fixes in mISDN, xgbe, qlge, sfc, and qlcnic. From Dan Carpenter. 24) msg.msg_iocb needs to be cleared in recvfrom() otherwise, for example, AF_ALG will interpret it as an async call. From Tadeusz Struk. 25) inetpeer_set_addr_v4 forgets to initialize the 'vif' field, from Eric Dumazet. 26) rhashtable enforces the minimum table size not early enough, breaking how we calculate the per-cpu lock allocations. From Herbert Xu. 27) Fix FCC port lockup in 82xx driver, from Martin Roth. 28) FOU sockets need to be freed using RCU, from Hannes Frederic Sowa. 29) Fix out-of-bounds access in __skb_complete_tx_timestamp() and sock_setsockopt() wrt. timestamp handling. From WANG Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (117 commits) net: check both type and procotol for tcp sockets drivers: net: xgene: fix Tx flow control tcp: restore fastopen with no data in SYN packet af_unix: Revert 'lock_interruptible' in stream receive code fou: clean up socket with kfree_rcu 82xx: FCC: Fixing a bug causing to FCC port lock-up gianfar: Don't enable RX Filer if not supported net: fix warnings in 'make htmldocs' by moving macro definition out of field declaration rhashtable: Fix walker list corruption rhashtable: Enforce minimum size on initial hash table inet: tcp: fix inetpeer_set_addr_v4() ipv6: automatically enable stable privacy mode if stable_secret set net: fix uninitialized variable issue bluetooth: Validate socket address length in sco_sock_bind(). net_sched: make qdisc_tree_decrease_qlen() work for non mq ser_gigaset: remove unnecessary kfree() calls from release method ser_gigaset: fix deallocation of platform device structure ser_gigaset: turn nonsense checks into WARN_ON ser_gigaset: fix up NULL checks qlcnic: fix a timeout loop ... 17 December 2015, 22:05:22 UTC
ac5cc97 WANG Cong 17 December 2015, 07:39:04 UTC net: check both type and procotol for tcp sockets Dmitry reported the following out-of-bound access: Call Trace: [<ffffffff816cec2e>] __asan_report_load4_noabort+0x3e/0x40 mm/kasan/report.c:294 [<ffffffff84affb14>] sock_setsockopt+0x1284/0x13d0 net/core/sock.c:880 [< inline >] SYSC_setsockopt net/socket.c:1746 [<ffffffff84aed7ee>] SyS_setsockopt+0x1fe/0x240 net/socket.c:1729 [<ffffffff85c18c76>] entry_SYSCALL_64_fastpath+0x16/0x7a arch/x86/entry/entry_64.S:185 This is because we mistake a raw socket as a tcp socket. We should check both sk->sk_type and sk->sk_protocol to ensure it is a tcp socket. Willem points out __skb_complete_tx_timestamp() needs to fix as well. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 December 2015, 20:46:32 UTC
67894ee Iyappan Subramanian 17 December 2015, 06:26:05 UTC drivers: net: xgene: fix Tx flow control Currently the Tx flow control is based on reading the hardware state, which is not accurate since it may not reflect the descriptors that are not yet reached the memory. To accurately control the Tx flow, changing it to be software based. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 December 2015, 20:45:53 UTC
07e100f Eric Dumazet 16 December 2015, 21:53:10 UTC tcp: restore fastopen with no data in SYN packet Yuchung tracked a regression caused by commit 57be5bdad759 ("ip: convert tcp_sendmsg() to iov_iter primitives") for TCP Fast Open. Some Fast Open users do not actually add any data in the SYN packet. Fixes: 57be5bdad759 ("ip: convert tcp_sendmsg() to iov_iter primitives") Reported-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 December 2015, 20:37:39 UTC
3822b5c Rainer Weikusat 16 December 2015, 20:09:25 UTC af_unix: Revert 'lock_interruptible' in stream receive code With b3ca9b02b00704053a38bfe4c31dbbb9c13595d0, the AF_UNIX SOCK_STREAM receive code was changed from using mutex_lock(&u->readlock) to mutex_lock_interruptible(&u->readlock) to prevent signals from being delayed for an indefinite time if a thread sleeping on the mutex happened to be selected for handling the signal. But this was never a problem with the stream receive code (as opposed to its datagram counterpart) as that never went to sleep waiting for new messages with the mutex held and thus, wouldn't cause secondary readers to block on the mutex waiting for the sleeping primary reader. As the interruptible locking makes the code more complicated in exchange for no benefit, change it back to using mutex_lock. Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 17 December 2015, 20:33:47 UTC
ce42af9 Linus Torvalds 17 December 2015, 19:55:29 UTC Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Some i915 fixes, one omap fix, one core regression fix. Not even enough fixes for a twelve days of xmas song, which seemms good" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Don't overwrite UNVERFIED mode status to OK drm/omap: fix fbdev pix format to support all platforms drm/i915: Do a better job at disabling primary plane in the noatomic case. drm/i915/skl: Double RC6 WRL always on drm/i915/skl: Disable coarse power gating up until F0 drm/i915: Remove incorrect warning in context cleanup 17 December 2015, 19:55:29 UTC
b4b29f9 Will Deacon 11 December 2015, 17:46:41 UTC locking/osq: Fix ordering of node initialisation in osq_lock The Cavium guys reported a soft lockup on their arm64 machine, caused by commit c55a6ffa6285 ("locking/osq: Relax atomic semantics"): mutex_optimistic_spin+0x9c/0x1d0 __mutex_lock_slowpath+0x44/0x158 mutex_lock+0x54/0x58 kernfs_iop_permission+0x38/0x70 __inode_permission+0x88/0xd8 inode_permission+0x30/0x6c link_path_walk+0x68/0x4d4 path_openat+0xb4/0x2bc do_filp_open+0x74/0xd0 do_sys_open+0x14c/0x228 SyS_openat+0x3c/0x48 el0_svc_naked+0x24/0x28 This is because in osq_lock we initialise the node for the current CPU: node->locked = 0; node->next = NULL; node->cpu = curr; and then publish the current CPU in the lock tail: old = atomic_xchg_acquire(&lock->tail, curr); Once the update to lock->tail is visible to another CPU, the node is then live and can be both read and updated by concurrent lockers. Unfortunately, the ACQUIRE semantics of the xchg operation mean that there is no guarantee the contents of the node will be visible before lock tail is updated. This can lead to lock corruption when, for example, a concurrent locker races to set the next field. Fixes: c55a6ffa6285 ("locking/osq: Relax atomic semantics"): Reported-by: David Daney <ddaney@caviumnetworks.com> Reported-by: Andrew Pinski <andrew.pinski@caviumnetworks.com> Tested-by: Andrew Pinski <andrew.pinski@caviumnetworks.com> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1449856001-21177-1-git-send-email-will.deacon@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 17 December 2015, 19:40:29 UTC
d7637d0 Linus Torvalds 17 December 2015, 19:20:13 UTC Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: - Two bug fixes for misuse of PAGE_MASK in scatterlist and dma-debug. These are tagged for -stable. The scatterlist impact is potentially corrupted dma addresses on HIGHMEM enabled platforms. - A minor locking fix for the NFIT hot-add implementation that is new in 4.4-rc. This would only trigger in the case a hot-add raced driver removal. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dma-debug: Fix dma_debug_entry offset calculation Revert "scatterlist: use sg_phys()" nfit: acpi_nfit_notify(): Do not leave device locked 17 December 2015, 19:20:13 UTC
ed94724 James Bottomley 17 December 2015, 15:32:08 UTC Merge remote-tracking branch 'mkp-scsi/4.4/scsi-fixes' into fixes 17 December 2015, 15:32:08 UTC
45ad7db Linus Walleij 17 December 2015, 09:14:24 UTC gpio: revert get() to non-errorprogating behaviour commit e20538b82f1f ("gpio: Propagate errors from chip->get()") started to propagate errors from the .get() functions since we can get errors from the infrastructure of e.g. slowbus GPIO expanders. However it turns out a bunch of drivers relied on the core to clamp the value, so we need to revert to the old behaviour and go over all drivers and fix them to conform to the expectations of the core before we go back to propagating the error code. Cc: stable@vger.kernel.org # 4.3+ Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Fixes: e20538b82f1f ("gpio: Propagate errors from chip->get()") Reported-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 17 December 2015, 14:48:29 UTC
67a76aa Linus Walleij 10 December 2015, 14:55:29 UTC gpio: generic: clamp values from bgpio_get_set() The bgpio_get_set() call should return a value clamped to [0,1], the current code will return a negative value if reading bit 31, which turns the value negative as this is a signed value and thus gets interpreted as an error by the gpiolib core. Found on the gpio-mxc but applies to any MMIO driver. Cc: stable@vger.kernel.org # 4.3+ Cc: kernel@pengutronix.de Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Fixes: e20538b82f1f ("gpio: Propagate errors from chip->get()") Reported-by: Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 17 December 2015, 14:47:38 UTC
98da62b Stewart Smith 11 December 2015, 01:08:23 UTC powerpc/powernv: pr_warn_once on unsupported OPAL_MSG type When running on newer OPAL firmware that supports sending extra OPAL_MSG types, we would print a warning on *every* message received. This could be a problem for kernels that don't support OPAL_MSG_OCC on machines that are running real close to thermal limits and the OCC is throttling the chip. For a kernel that is paying attention to the message queue, we could get these notifications quite often. Conceivably, future message types could also come fairly often, and printing that we didn't understand them 10,000 times provides no further information than printing them once. Cc: stable@vger.kernel.org Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 17 December 2015, 09:42:13 UTC
575a9d4 Vineet Gupta 17 December 2015, 06:52:21 UTC ARC: smp: Rename platform hook @init_cpu_smp -> @init_per_cpu Makes it similar to smp_ops which also has callback with same name Signed-off-by: Vineet Gupta <vgupta@synopsys.com> 17 December 2015, 07:26:56 UTC
b474a02 Noam Camus 16 December 2015, 01:10:27 UTC ARC: rename smp operation init_irq_cpu() to init_per_cpu() This will better reflect its description i.e. "any needed setup..." and not just do an "IPI request". Signed-off-by: Noam Camus <noamc@ezchip.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> 17 December 2015, 07:26:43 UTC
323f41f Vineet Gupta 16 December 2015, 11:47:00 UTC ARC: dw2 unwind: Ignore CIE version !=1 gracefully instead of bailing ARC dwarf unwinder only supports CIE version == 1 The boot time dwarf sanitizer (part of binary lookup table constructor) would simply bail if it saw CIE version == 3, rendering unwinder with a NULL lookup table. It seems libgcc linked with kernel does have such entries. With fallback linear search removed, and a NULL binary lookup table, unwinder fails to generate any stack trace. So allow graceful ignoring of unsupported CIE entries. This problem was initially seen in Alexey's setup (and not mine) as he was using buildroot built toolchain (libgcc) which doesn't get built with CFLAGS_FOR_TARGET="-gdwarf-2 which is my default Fixes STAR 9000985048: "kernel unwinder broken with stock tools" Fixes: 2e22502c080f ARC: dw2 unwind: Remove falllback linear search thru FDE entries Reported-by Alexey Brodkin <abrodkin@synopsys.com> Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> 17 December 2015, 05:40:23 UTC
bc79c9a Vineet Gupta 11 December 2015, 12:34:22 UTC ARC: dw2 unwind: Reinstante unwinding out of modules The fix which removed linear searching of dwarf (because binary lookup data always exists) missed out on the fact that modules don't get the binary lookup tables info. This caused unwinding out of modules to stop working. So add binary lookup header setup (equivalent of eh_frame_hdr setup) to modules as well. While at it, confine the header setup to within unwinder code, reducing one API exposed out of unwinder code. Fixes: 2e22502c080f ARC: dw2 unwind: Remove falllback linear search thru FDE entries Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> 17 December 2015, 05:40:23 UTC
ff1c0b6 Vineet Gupta 15 December 2015, 08:27:16 UTC ARC: [plat-sim] unbork non default CONFIG_LINUX_LINK_BASE HIGHMEM support bumped the default memory size for nsim platform to 1G. Thus total memory ended at the very edge of start of peripherals address space. With linux link base shifted, memory started bleeding into peripheral space which caused early boot bad_page spew ! Fixes: 29e332261d2 ("ARC: mm: HIGHMEM: populate high memory from DT") Reported-by: Anton Kolesov <akolesov@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> 17 December 2015, 05:36:43 UTC
3036fac Hannes Frederic Sowa 15 December 2015, 20:01:53 UTC fou: clean up socket with kfree_rcu fou->udp_offloads is managed by RCU. As it is actually included inside the fou sockets, we cannot let the memory go out of scope before a grace period. We either can synchronize_rcu or switch over to kfree_rcu to manage the sockets. kfree_rcu seems appropriate as it is used by vxlan and geneve. Fixes: 23461551c00628c ("fou: Support for foo-over-udp RX path") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 17 December 2015, 00:03:02 UTC
4d4f379 David S. Miller 16 December 2015, 23:33:38 UTC Merge tag 'mac80211-for-davem-2015-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Another set of fixes: * memory leak fixes (from Ola) * operating mode notification spec compliance fix (from Eyal) * copy rfkill names in case pointer becomes invalid (myself) * two hardware restart fixes (myself) * get rid of "limiting TX power" log spam (myself) ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2015, 23:33:38 UTC
79aa05a Martin Roth 15 December 2015, 02:17:53 UTC 82xx: FCC: Fixing a bug causing to FCC port lock-up The patch fixes FCC port lock-up, which occurs as a result of a bug during underrun/collision handling. Within the tx_startup() function in mac-fcc.c, the address of last BD is not calculated correctly. As a result of wrong calculation of the last BD address, the next transmitted BD may be set to an area out of the transmit BD ring. This actually causes to port lock-up and it is not recoverable. Signed-off-by: Martin Roth <martin.roth@motorolasolutions.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2015, 23:32:35 UTC
7bff47d Hamish Martin 15 December 2015, 01:14:50 UTC gianfar: Don't enable RX Filer if not supported After commit 15bf176db1fb ("gianfar: Don't enable the Filer w/o the Parser"), 'TSEC' model controllers (for example as seen on MPC8541E) always have 8 bytes stripped from the front of received frames. Only 'eTSEC' gianfar controllers have the RX Filer capability (amongst other enhancements). Previously this was treated as always enabled for both 'TSEC' and 'eTSEC' controllers. In commit 15bf176db1fb ("gianfar: Don't enable the Filer w/o the Parser") a subtle change was made to the setting of 'uses_rxfcb' to effectively always set it (since 'rx_filer_enable' was always true). This had the side-effect of always stripping 8 bytes from the front of received frames on 'TSEC' type controllers. We now only enable the RX Filer capability on controller types that support it, thereby avoiding the issue for 'TSEC' type controllers. Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Reviewed-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2015, 23:31:00 UTC
0354aec Daniel Mentz 16 December 2015, 01:38:48 UTC dma-debug: Fix dma_debug_entry offset calculation dma-debug uses struct dma_debug_entry to keep track of dma coherent memory allocation requests. The virtual address is converted into a pfn and an offset. Previously, the offset was calculated using an incorrect bit mask. As a result, we saw incorrect error messages from dma-debug like the following: "DMA-API: exceeded 7 overlapping mappings of cacheline 0x03e00000" Cacheline 0x03e00000 does not exist on our platform. Cc: <stable@vger.kernel.org> Fixes: 0abdd7a81b7e ("dma-debug: introduce debug_dma_assert_idle()") Signed-off-by: Daniel Mentz <danielmentz@google.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 16 December 2015, 19:24:26 UTC
a5e90b1 Linus Torvalds 16 December 2015, 18:57:24 UTC Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: "Further ARM fixes: - Anson Huang noticed that we were corrupting a register we shouldn't be during suspend on some CPUs. - Shengjiu Wang spotted a bug in the 'swp' instruction emulation. - Will Deacon fixed a bug in the ASID allocator. - Laura Abbott fixed the kernel permission protection to apply to all threads running in the system. - I've fixed two bugs with the domain access control register handling, one to do with printing an appropriate value at oops time, and the other to further fix the uaccess_with_memcpy code" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8475/1: SWP emulation: Restore original *data when failed ARM: 8471/1: need to save/restore arm register(r11) when it is corrupted ARM: fix uaccess_with_memcpy() with SW_DOMAIN_PAN ARM: report proper DACR value in oops dumps ARM: 8464/1: Update all mm structures with section adjustments ARM: 8465/1: mm: keep reserved ASIDs in sync with mm after multiple rollovers 16 December 2015, 18:57:24 UTC
7bbadd2 Hannes Frederic Sowa 14 December 2015, 22:30:43 UTC net: fix warnings in 'make htmldocs' by moving macro definition out of field declaration Docbook does not like the definition of macros inside a field declaration and adds a warning. Move the definition out. Fixes: 79462ad02e86180 ("net: add validation for the socket syscall protocol argument") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2015, 16:44:17 UTC
c6ff526 Herbert Xu 16 December 2015, 08:45:54 UTC rhashtable: Fix walker list corruption The commit ba7c95ea3870fe7b847466d39a049ab6f156aa2c ("rhashtable: Fix sleeping inside RCU critical section in walk_stop") introduced a new spinlock for the walker list. However, it did not convert all existing users of the list over to the new spin lock. Some continued to use the old mutext for this purpose. This obviously led to corruption of the list. The fix is to use the spin lock everywhere where we touch the list. This also allows us to do rcu_rad_lock before we take the lock in rhashtable_walk_start. With the old mutex this would've deadlocked but it's safe with the new spin lock. Fixes: ba7c95ea3870 ("rhashtable: Fix sleeping inside RCU...") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2015, 16:13:14 UTC
3a32460 Herbert Xu 16 December 2015, 10:13:14 UTC rhashtable: Enforce minimum size on initial hash table William Hua <william.hua@canonical.com> wrote: > > I wasn't aware there was an enforced minimum size. I simply set the > nelem_hint in the rhastable_params struct to 1, expecting it to grow as > needed. This caused a segfault afterwards when trying to insert an > element. OK we're doing the size computation before we enforce the limit on min_size. ---8<--- We need to do the initial hash table size computation after we have obtained the correct min_size/max_size parameters. Otherwise we may end up with a hash table whose size is outside the allowed envelope. Fixes: a998f712f77e ("rhashtable: Round up/down min/max_size to...") Reported-by: William Hua <william.hua@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2015, 15:44:08 UTC
c1f4a14 Mark Brown 16 December 2015, 13:28:32 UTC Merge remote-tracking branches 'spi/fix/dspi' and 'spi/fix/spidev' into spi-linus 16 December 2015, 13:28:32 UTC
9ce5db2 Mark Brown 16 December 2015, 13:28:31 UTC Merge remote-tracking branch 'spi/fix/core' into spi-linus 16 December 2015, 13:28:31 UTC
157f38f Johan Hovold 14 December 2015, 15:16:19 UTC spi: fix parent-device reference leak Fix parent-device reference leak due to SPI-core taking an unnecessary reference to the parent when allocating the master structure, a reference that was never released. Note that driver core takes its own reference to the parent when the master device is registered. Fixes: 49dce689ad4e ("spi doesn't need class_device") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org 16 December 2015, 12:28:25 UTC
56ea107 Mark Brown 16 November 2015, 13:57:37 UTC spi: spidev: Hold spi_lock over all defererences of spi in release() We use the spi_lock spinlock to protect against races between the device being removed and file operations on the spidev. This means that in the removal path all references to the device need to be done under lock as in removal we dropping references to the device. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org> 16 December 2015, 12:09:35 UTC
2475c36 Michael Ellerman 16 December 2015, 10:26:28 UTC Partial revert of "powerpc: Individual System V IPC system calls" This partially reverts commit a34236155afb1cc41945e58388ac988431bcb0b8. While reviewing the glibc patch to exploit the individual IPC calls, Arnd & Andreas noticed that we were still requiring userspace to pass IPC_64 in order to get the new style IPC API. With a bit of cleanup in the kernel we can drop that requirement, and instead only provide the new style API, which will simplify things for userspace. Rather than try and sneak that patch into 4.4, instead we will drop the individual IPC calls for powerpc, and merge them again in 4.5 once the cleanup patch has gone in. Because we've already added sys_mlock2() as syscall #378, we don't do a full revert of the IPC calls. Instead we drop the __NR #defines, and send those now undefined syscall numbers to sys_ni_syscall(). This leaves a gap in the syscall numbers, but we'll reuse them when we merge the individual IPC calls. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> 16 December 2015, 10:52:32 UTC
887dc9f Eric Dumazet 16 December 2015, 04:56:44 UTC inet: tcp: fix inetpeer_set_addr_v4() David Ahern added a vif field in the a4 part of inetpeer_addr struct. This broke IPv4 TCP fast open client side and more generally tcp metrics cache, because inetpeer_addr_cmp() is now comparing two u32 instead of one. inetpeer_set_addr_v4() needs to properly init vif field, otherwise the comparison result depends on uninitialized data. Fixes: 192132b9a034 ("net: Add support for VRFs to inetpeer cache") Reported-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2015, 05:14:12 UTC
9b29c69 Hannes Frederic Sowa 15 December 2015, 21:59:12 UTC ipv6: automatically enable stable privacy mode if stable_secret set Bjørn reported that while we switch all interfaces to privacy stable mode when setting the secret, we don't set this mode for new interfaces. This does not make sense, so change this behaviour. Fixes: 622c81d57b392cc ("ipv6: generation of stable privacy addresses for link-local and autoconf") Reported-by: Bjørn Mork <bjorn@mork.no> Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2015, 04:37:32 UTC
3e6110f Dan Williams 15 December 2015, 20:54:06 UTC Revert "scatterlist: use sg_phys()" commit db0fa0cb0157 "scatterlist: use sg_phys()" did replacements of the form: phys_addr_t phys = page_to_phys(sg_page(s)); phys_addr_t phys = sg_phys(s) & PAGE_MASK; However, this breaks platforms where sizeof(phys_addr_t) > sizeof(unsigned long). Revert for 4.3 and 4.4 to make room for a combined helper in 4.5. Cc: <stable@vger.kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: db0fa0cb0157 ("scatterlist: use sg_phys()") Suggested-by: Joerg Roedel <joro@8bytes.org> Reported-by: Vitaly Lavrov <vel21ripn@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 15 December 2015, 20:54:06 UTC
130ed5d tadeusz.struk@intel.com 15 December 2015, 18:46:17 UTC net: fix uninitialized variable issue msg_iocb needs to be initialized on the recv/recvfrom path. Otherwise afalg will wrongly interpret it as an async call. Cc: stable@vger.kernel.org Reported-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 20:46:48 UTC
5233252 David S. Miller 15 December 2015, 20:39:08 UTC bluetooth: Validate socket address length in sco_sock_bind(). Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 20:39:08 UTC
3eab458 Charlie Mooney 15 December 2015, 19:32:10 UTC Input: elan_i2c - set input device's vendor and product IDs Previously the "vendor" and "product" IDs for the elan_i2c driver simply reported 0000. This patch modifies the elan_i2c driver to include the Elan vendor ID and the touchpad's product id under input/input*/{vendor,product}. Specifically, this is to allow us to apply a generic Elan gestures config that will apply to all Elan touchpads on ChromeOS. These configs match to input devices in various ways, but one major way is by matching on vendor ID. Adding this patch allows the default Elan touchpad config to be applied to Elan touchpads in this kernel by matching on devices that have vendor ID 04f3. Note that product ID is also available via custom sysfs entry "product_id" as well. Signed-off-by: Charlie Mooney <charliemooney@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 15 December 2015, 19:35:55 UTC
edb42dc Linus Torvalds 15 December 2015, 18:56:39 UTC Merge tag 'dmaengine-fix-4.4-rc6' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "This has fixes spread thru driver, notably among them: - edma fixes for recent edma DT changes which went into 4.4 - odd fixes for at_hdmac - minor fixes on bc dma and mic dma" * tag 'dmaengine-fix-4.4-rc6' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: at_xdmac: fix at_xdmac_prep_dma_memcpy() dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit type dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit type dmaengine: mic_x100: add missing spin_unlock dmaengine: bcm2835-dma: Convert to use DMA pool dmaengine: at_xdmac: fix bad behavior in interleaved mode dmaengine: at_xdmac: fix false condition for memset_sg transfers dmaengine: at_xdmac: fix macro typo 15 December 2015, 18:56:39 UTC
8c2b759 Linus Torvalds 15 December 2015, 18:50:13 UTC Merge tag 'fbdev-fixes-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull two fbdev fixes from Tomi Valkeinen: - OMAP: fix analog tv-out when using omapdrm - fsl: Fix kernel crash when diu_ops is not implemented * tag 'fbdev-fixes-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: OMAPDSS: fix timings for VENC to match what omapdrm expects video: fbdev: fsl: Fix kernel crash when diu_ops is not implemented 15 December 2015, 18:50:13 UTC
5fab517 Linus Torvalds 15 December 2015, 18:45:29 UTC Merge tag 'please-pull-mlock2' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 fix from Tony Luck: "Wire up mlock2() syscall for ia64" * tag 'please-pull-mlock2' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Enable mlock2 syscall for ia64 15 December 2015, 18:45:29 UTC
225734d Eric Dumazet 15 December 2015, 17:43:12 UTC net_sched: make qdisc_tree_decrease_qlen() work for non mq Stas Nichiporovich reported a regression in his HFSC qdisc setup on a non multi queue device. It turns out I mistakenly added a TCQ_F_NOPARENT flag on all qdisc allocated in qdisc_create() for non multi queue devices, which was rather buggy. I was clearly mislead by the TCQ_F_ONETXQUEUE that is also set here for no good reason, since it only matters for the root qdisc. Fixes: 4eaf3b84f288 ("net_sched: fix qdisc_tree_decrease_qlen() races") Reported-by: Stas Nichiporovich <stasn77@gmail.com> Tested-by: Stas Nichiporovich <stasn77@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 18:41:52 UTC
58ab367 David S. Miller 15 December 2015, 18:24:22 UTC Merge branch 'ser_gigaset-platform-device-dealloc' Paul Bolle says: ==================== ser_gigaset: fix deallocation of platform device structure Sascha Levin reported that the syzkaller fuzzer triggered a WARNING in ser_gigaset (see https://lkml.kernel.org/g/56587467.8050102@oracle.com ). It turned out that ser_gigaset has always deallocated its platform device structure incorrectly. Tilman submitted the patch that fixes that (3/4) and a related cleanup (4/4). Tilman also submitted a minor cleanup of some NULL checks (1/4) that prompted Alan to turn those checks into WARN_ONs (2/4). If no one hits these WARN_ONs in the next couple of releases these WARN_ONs should be removed. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 18:24:22 UTC
8aeb3c3 Tilman Schmidt 15 December 2015, 17:11:31 UTC ser_gigaset: remove unnecessary kfree() calls from release method device->platform_data and platform_device->resource are never used and remain NULL through their entire life. Drops the kfree() calls for them from the device release method. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 18:24:21 UTC
4c5e354 Tilman Schmidt 15 December 2015, 17:11:30 UTC ser_gigaset: fix deallocation of platform device structure When shutting down the device, the struct ser_cardstate must not be kfree()d immediately after the call to platform_device_unregister() since the embedded struct platform_device is still in use. Move the kfree() call to the release method instead. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Fixes: 2869b23e4b95 ("drivers/isdn/gigaset: new M101 driver (v2)") Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 18:24:21 UTC
ede03d3 Alan Cox 15 December 2015, 17:11:29 UTC ser_gigaset: turn nonsense checks into WARN_ON These checks do nothing useful to protect the code from races. On the other hand if the old code has been masking a real bug we would like to know about it. The check for tiocmset is kept because it is valid for a tty driver to have a NULL tiocmset method. That in itself is probably a mistake given modern coding practices - but needs fixing in the tty layer. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 18:24:21 UTC
back to top