Skip to main content

Browse the archive

https://github.com/torvalds/linux
27 March 2024, 02:37:15 UTC
sort by:
Revision Author Date Message Commit Date
8a749fd Linus Torvalds 01 October 2023, 21:15:13 UTC Linux 6.6-rc4 01 October 2023, 21:15:13 UTC
e81a2da Linus Torvalds 01 October 2023, 20:48:46 UTC Merge tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix the module compression with xz so the in-kernel decompressor works - Document a kconfig idiom to express an optional dependency between modules - Make modpost, when W=1 is given, detect broken drivers that reference .exit.* sections - Remove unused code * tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove stale code for 'source' symlink in packaging scripts modpost: Don't let "driver"s reference .exit.* vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macros modpost: add missing else to the "of" check Documentation: kbuild: explain handling optional dependencies kbuild: Use CRC32 and a 1MiB dictionary for XZ compressed modules 01 October 2023, 20:48:46 UTC
d2c5231 Linus Torvalds 01 October 2023, 20:33:25 UTC Merge tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Fourteen hotfixes, eleven of which are cc:stable. The remainder pertain to issues which were introduced after 6.5" * tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: Crash: add lock to serialize crash hotplug handling selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions() mm, memcg: reconsider kmem.limit_in_bytes deprecation mm: zswap: fix potential memory corruption on duplicate store arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries mm: hugetlb: add huge page size param to set_huge_pte_at() maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states maple_tree: add mas_is_active() to detect in-tree walks nilfs2: fix potential use after free in nilfs_gccache_submit_read_data() mm: abstract moving to the next PFN mm: report success more often from filemap_map_folio_range() fs: binfmt_elf_efpic: fix personality for ELF-FDPIC 01 October 2023, 20:33:25 UTC
8f63336 Linus Torvalds 01 October 2023, 19:50:04 UTC Merge tag 'char-misc-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull misc driver fix from Greg KH: "Here is a single, much requested, fix for a set of misc drivers to resolve a much reported regression in the -rc series that has also propagated back to the stable releases. Sorry for the delay, lots of conference travel for a few weeks put me very far behind in patch wrangling. It has been reported by many to resolve the reported problem, and has been in linux-next with no reported issues" * tag 'char-misc-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: rtsx: Fix some platforms can not boot and move the l1ss judgment to probe 01 October 2023, 19:50:04 UTC
3abd15e Linus Torvalds 01 October 2023, 19:44:45 UTC Merge tag 'tty-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver fixes from Greg KH: "Here are two tty/serial driver fixes for 6.6-rc4 that resolve some reported regressions: - revert a n_gsm change that ended up causing problems - 8250_port fix for irq data both have been in linux-next for over a week with no reported problems" * tag 'tty-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux" serial: 8250_port: Check IRQ data before use 01 October 2023, 19:44:45 UTC
ec8c298 Linus Torvalds 01 October 2023, 16:50:58 UTC Merge tag 'x86-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: a kerneldoc build warning fix, add SRSO mitigation for AMD-derived Hygon processors, and fix a SGX kernel crash in the page fault handler that can trigger when ksgxd races to reclaim the SECS special page, by making the SECS page unswappable" * tag 'x86-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race x86/srso: Add SRSO mitigation for Hygon processors x86/kgdb: Fix a kerneldoc warning when build with W=1 01 October 2023, 16:50:58 UTC
373ceff Linus Torvalds 01 October 2023, 16:41:58 UTC Merge tag 'timers-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "Fix a spurious kernel warning during CPU hotplug events that may trigger when timer/hrtimer softirqs are pending, which are otherwise hotplug-safe and don't merit a warning" * tag 'timers-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Tag (hr)timer softirq as hotplug safe 01 October 2023, 16:41:58 UTC
c5ecffe Linus Torvalds 01 October 2023, 16:38:05 UTC Merge tag 'sched-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "Fix a RT tasks related lockup/live-lock during CPU offlining" * tag 'sched-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt: Fix live lock between select_fallback_rq() and RT push 01 October 2023, 16:38:05 UTC
3a38c57 Linus Torvalds 01 October 2023, 16:34:53 UTC Merge tag 'perf-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fixes from Ingo Molnar: "Misc fixes: work around an AMD microcode bug on certain models, and fix kexec kernel PMI handlers on AMD systems that get loaded on older kernels that have an unexpected register state" * tag 'perf-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd: Do not WARN() on every IRQ perf/x86/amd/core: Fix overflow reset on hotplug 01 October 2023, 16:34:53 UTC
2d7d1bc Masahiro Yamada 01 October 2023, 14:03:39 UTC kbuild: remove stale code for 'source' symlink in packaging scripts Since commit d8131c2965d5 ("kbuild: remove $(MODLIB)/source symlink"), modules_install does not create the 'source' symlink. Remove the stale code from builddeb and kernel.spec. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 01 October 2023, 14:06:06 UTC
f177cd0 Uwe Kleine-König 30 September 2023, 16:52:04 UTC modpost: Don't let "driver"s reference .exit.* Drivers must not reference functions marked with __exit as these likely are not available when the code is built-in. There are few creative offenders uncovered for example in ARCH=amd64 allmodconfig builds. So only trigger the section mismatch warning for W=1 builds. The dual rule that drivers must not reference .init.* is implemented since commit 0db252452378 ("modpost: don't allow *driver to reference .init.*") which however missed that .exit.* should be handled in the same way. Thanks to Masahiro Yamada and Arnd Bergmann who gave valuable hints to find this improvement. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 01 October 2023, 05:55:30 UTC
15e8664 Masahiro Yamada 30 September 2023, 07:13:35 UTC vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macros Remove the left-over of commit e24f6628811e ("modpost: remove all traces of cpuinit/cpuexit sections"). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> 01 October 2023, 05:55:23 UTC
cbc3d00 Mauricio Faria de Oliveira 28 September 2023, 20:28:07 UTC modpost: add missing else to the "of" check Without this 'else' statement, an "usb" name goes into two handlers: the first/previous 'if' statement _AND_ the for-loop over 'devtable', but the latter is useless as it has no 'usb' device_id entry anyway. Tested with allmodconfig before/after patch; no changes to *.mod.c: git checkout v6.6-rc3 make -j$(nproc) allmodconfig make -j$(nproc) olddefconfig make -j$(nproc) find . -name '*.mod.c' | cpio -pd /tmp/before # apply patch make -j$(nproc) find . -name '*.mod.c' | cpio -pd /tmp/after diff -r /tmp/before/ /tmp/after/ # no difference Fixes: acbef7b76629 ("modpost: fix module autoloading for OF devices with generic compatible property") Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 01 October 2023, 05:24:34 UTC
e402b08 Linus Torvalds 01 October 2023, 01:41:37 UTC Merge tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are the latest bug fixes that have come up in the soc tree. Most of these are fairly minor. Most notably, the majority of changes this time are not for dts files as usual. - Updates to the addresses of the broadcom and aspeed entries in the MAINTAINERS file. - Defconfig updates to address a regression on samsung and a build warning from an unknown Kconfig symbol - Build fixes for the StrongARM and Uniphier platforms - Code fixes for SCMI and FF-A firmware drivers, both of which had a simple bug that resulted in invalid data, and a lesser fix for the optee firmware driver - Multiple fixes for the recently added loongson/loongarch "guts" soc driver - Devicetree fixes for RISC-V on the startfive platform, addressing issues with NOR flash, usb and uart. - Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems with clock, gpio, hdmi settings and the Makefile - Bug fixes for i.MX firmware code and the OCOTP soc driver - Multiple fixes for the TI sysc bus driver - Minor dts updates for TI omap dts files, to address boot time warnings and errors" * tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) MAINTAINERS: Fix Florian Fainelli's email address arm64: defconfig: enable syscon-poweroff driver ARM: locomo: fix locomolcd_power declaration soc: loongson: loongson2_guts: Remove unneeded semicolon soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource() soc: loongson: loongson_pm2: Populate children syscon nodes dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as child soc: loongson: loongson_pm2: Drop useless of_device_id compatible dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatible soc: loongson: loongson_pm2: Add dependency for INPUT arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y ARM: uniphier: fix cache kernel-doc warnings MAINTAINERS: aspeed: Update Andrew's email address MAINTAINERS: aspeed: Update git tree URL firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND arm64: dts: imx: Add imx8mm-prt8mm.dtb to build arm64: dts: imx8mm-evk: Fix hdmi@3d node soc: imx8m: Enable OCOTP clock for imx8mm before reading registers arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock arm64: dts: imx8mp: Fix SDMA2/3 clocks ... 01 October 2023, 01:41:37 UTC
3b347e4 Linus Torvalds 01 October 2023, 01:19:02 UTC Merge tag 'trace-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Make sure 32-bit applications using user events have aligned access when running on a 64-bit kernel. - Add cond_resched in the loop that handles converting enums in print_fmt string is trace events. - Fix premature wake ups of polling processes in the tracing ring buffer. When a task polls waiting for a percentage of the ring buffer to be filled, the writer still will wake it up at every event. Add the polling's percentage to the "shortest_full" list to tell the writer when to wake it up. - For eventfs dir lookups on dynamic events, an event system's only event could be removed, leaving its dentry with no children. This is totally legitimate. But in eventfs_release() it must not access the children array, as it is only allocated when the dentry has children. * tag 'trace-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: eventfs: Test for dentries array allocated in eventfs_release() tracing/user_events: Align set_bit() address for all archs tracing: relax trace_event_eval_update() execution with cond_resched() ring-buffer: Update "shortest_full" in polling 01 October 2023, 01:19:02 UTC
2598bd3 Steven Rostedt (Google) 30 September 2023, 13:01:06 UTC eventfs: Test for dentries array allocated in eventfs_release() The dcache_dir_open_wrapper() could be called when a dynamic event is being deleted leaving a dentry with no children. In this case the dlist->dentries array will never be allocated. This needs to be checked for in eventfs_release(), otherwise it will trigger a NULL pointer dereference. Link: https://lore.kernel.org/linux-trace-kernel/20230930090106.1c3164e9@rorschach.local.home Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Fixes: ef36b4f92868 ("eventfs: Remember what dentries were created on dir open") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> 30 September 2023, 20:26:04 UTC
2de9ee9 Beau Belgrave 25 September 2023, 23:08:28 UTC tracing/user_events: Align set_bit() address for all archs All architectures should use a long aligned address passed to set_bit(). User processes can pass either a 32-bit or 64-bit sized value to be updated when tracing is enabled when on a 64-bit kernel. Both cases are ensured to be naturally aligned, however, that is not enough. The address must be long aligned without affecting checks on the value within the user process which require different adjustments for the bit for little and big endian CPUs. Add a compat flag to user_event_enabler that indicates when a 32-bit value is being used on a 64-bit kernel. Long align addresses and correct the bit to be used by set_bit() to account for this alignment. Ensure compat flags are copied during forks and used during deletion clears. Link: https://lore.kernel.org/linux-trace-kernel/20230925230829.341-2-beaub@linux.microsoft.com Link: https://lore.kernel.org/linux-trace-kernel/20230914131102.179100-1-cleger@rivosinc.com/ Cc: stable@vger.kernel.org Fixes: 7235759084a4 ("tracing/user_events: Use remote writes for event enablement") Reported-by: Clément Léger <cleger@rivosinc.com> Suggested-by: Clément Léger <cleger@rivosinc.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> 30 September 2023, 20:25:41 UTC
23cce5f Clément Léger 29 September 2023, 19:16:37 UTC tracing: relax trace_event_eval_update() execution with cond_resched() When kernel is compiled without preemption, the eval_map_work_func() (which calls trace_event_eval_update()) will not be preempted up to its complete execution. This can actually cause a problem since if another CPU call stop_machine(), the call will have to wait for the eval_map_work_func() function to finish executing in the workqueue before being able to be scheduled. This problem was observe on a SMP system at boot time, when the CPU calling the initcalls executed clocksource_done_booting() which in the end calls stop_machine(). We observed a 1 second delay because one CPU was executing eval_map_work_func() and was not preempted by the stop_machine() task. Adding a call to cond_resched() in trace_event_eval_update() allows other tasks to be executed and thus continue working asynchronously like before without blocking any pending task at boot time. Link: https://lore.kernel.org/linux-trace-kernel/20230929191637.416931-1-cleger@rivosinc.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Clément Léger <cleger@rivosinc.com> Tested-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> 30 September 2023, 20:24:55 UTC
1e0cb39 Steven Rostedt (Google) 29 September 2023, 22:01:13 UTC ring-buffer: Update "shortest_full" in polling It was discovered that the ring buffer polling was incorrectly stating that read would not block, but that's because polling did not take into account that reads will block if the "buffer-percent" was set. Instead, the ring buffer polling would say reads would not block if there was any data in the ring buffer. This was incorrect behavior from a user space point of view. This was fixed by commit 42fb0a1e84ff by having the polling code check if the ring buffer had more data than what the user specified "buffer percent" had. The problem now is that the polling code did not register itself to the writer that it wanted to wait for a specific "full" value of the ring buffer. The result was that the writer would wake the polling waiter whenever there was a new event. The polling waiter would then wake up, see that there's not enough data in the ring buffer to notify user space and then go back to sleep. The next event would wake it up again. Before the polling fix was added, the code would wake up around 100 times for a hackbench 30 benchmark. After the "fix", due to the constant waking of the writer, it would wake up over 11,0000 times! It would never leave the kernel, so the user space behavior was still "correct", but this definitely is not the desired effect. To fix this, have the polling code add what it's waiting for to the "shortest_full" variable, to tell the writer not to wake it up if the buffer is not as full as it expects to be. Note, after this fix, it appears that the waiter is now woken up around 2x the times it was before (~200). This is a tremendous improvement from the 11,000 times, but I will need to spend some time to see why polling is more aggressive in its wakeups than the read blocking code. Link: https://lore.kernel.org/linux-trace-kernel/20230929180113.01c2cae3@rorschach.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Fixes: 42fb0a1e84ff ("tracing/ring-buffer: Have polling block on watermark") Reported-by: Julia Lawall <julia.lawall@inria.fr> Tested-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> 30 September 2023, 20:17:34 UTC
3b51796 Linus Torvalds 30 September 2023, 18:07:26 UTC Merge tag 'dma-mapping-6.6-2023-09-30' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - fix the narea calculation in swiotlb initialization (Ross Lagerwall) - fix the check whether a device has used swiotlb (Petr Tesarik) * tag 'dma-mapping-6.6-2023-09-30' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: fix the check whether a device has used software IO TLB swiotlb: use the calculated number of areas 30 September 2023, 18:07:26 UTC
25d48d5 Linus Torvalds 30 September 2023, 18:01:38 UTC Merge tag 'iomap-6.6-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull iomap fixes from Darrick Wong: - Handle a race between writing and shrinking block devices by returning EIO - Fix a typo in a comment * tag 'iomap-6.6-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: Spelling s/preceeding/preceding/g iomap: add a workaround for racy i_size updates on block devices 30 September 2023, 18:01:38 UTC
cefc06e Linus Torvalds 30 September 2023, 17:07:33 UTC Merge tag 'i2c-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Usual business: a driver fix, a DT fix, a minor core fix" * tag 'i2c-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: npcm7xx: Fix callback completion ordering i2c: mux: Avoid potential false error message in i2c_mux_add_adapter dt-bindings: i2c: mxs: Pass ref and 'unevaluatedProperties: false' 30 September 2023, 17:07:33 UTC
830380e Linus Torvalds 30 September 2023, 16:59:37 UTC Merge tag 'acpi-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a possible NULL pointer dereference in the error path of acpi_video_bus_add() resulting from recent changes (Dinghao Liu)" * tag 'acpi-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Fix NULL pointer dereference in acpi_video_bus_add() 30 September 2023, 16:59:37 UTC
1c9d831 Linus Torvalds 30 September 2023, 16:53:09 UTC Merge tag 'powerpc-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix arch_stack_walk_reliable(), used by live patching - Fix powerpc selftests to work with run_kselftest.sh Thanks to Joe Lawrence and Petr Mladek. * tag 'powerpc-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix emit_tests to work with run_kselftest.sh powerpc/stacktrace: Fix arch_stack_walk_reliable() 30 September 2023, 16:53:09 UTC
ae21363 Linus Torvalds 30 September 2023, 16:44:48 UTC Merge tag 'nfsd-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: - Fix NFSv4 READ corner case * tag 'nfsd-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: NFSD: Fix zero NFSv4 READ results when RQ_SPLICE_OK is not set 30 September 2023, 16:44:48 UTC
ba77f7a Linus Torvalds 30 September 2023, 16:39:23 UTC Merge tag '6.6-rc3-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6 Pull smb client fix from Steve French: "Fix for password freeing potential oops (also for stable)" * tag '6.6-rc3-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6: fs/smb/client: Reset password pointer to NULL 30 September 2023, 16:39:23 UTC
e2a8f20 Baoquan He 26 September 2023, 12:09:05 UTC Crash: add lock to serialize crash hotplug handling Eric reported that handling corresponding crash hotplug event can be failed easily when many memory hotplug event are notified in a short period. They failed because failing to take __kexec_lock. ======= [ 78.714569] Fallback order for Node 0: 0 [ 78.714575] Built 1 zonelists, mobility grouping on. Total pages: 1817886 [ 78.717133] Policy zone: Normal [ 78.724423] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate [ 78.727207] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate [ 80.056643] PEFILE: Unsigned PE binary ======= The memory hotplug events are notified very quickly and very many, while the handling of crash hotplug is much slower relatively. So the atomic variable __kexec_lock and kexec_trylock() can't guarantee the serialization of crash hotplug handling. Here, add a new mutex lock __crash_hotplug_lock to serialize crash hotplug handling specifically. This doesn't impact the usage of __kexec_lock. Link: https://lkml.kernel.org/r/20230926120905.392903-1-bhe@redhat.com Fixes: 247262756121 ("crash: add generic infrastructure for crash hotplug support") Signed-off-by: Baoquan He <bhe@redhat.com> Tested-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Valentin Schneider <vschneid@redhat.com> Cc: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 30 September 2023, 00:20:48 UTC
bbe246f Juntong Deng 26 September 2023, 18:19:44 UTC selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error According to the awk manual, the -e option does not need to be specified in front of 'program' (unless you need to mix program-file). The redundant -e option can cause error when users use awk tools other than gawk (for example, mawk does not support the -e option). Error Example: awk: not an option: -e Link: https://lkml.kernel.org/r/VI1P193MB075228810591AF2FDD7D42C599C3A@VI1P193MB0752.EURP193.PROD.OUTLOOK.COM Signed-off-by: Juntong Deng <juntong.deng@outlook.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 30 September 2023, 00:20:48 UTC
2452626 Yang Shi 20 September 2023, 22:32:42 UTC mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified When calling mbind() with MPOL_MF_{MOVE|MOVEALL} | MPOL_MF_STRICT, kernel should attempt to migrate all existing pages, and return -EIO if there is misplaced or unmovable page. Then commit 6f4576e3687b ("mempolicy: apply page table walker on queue_pages_range()") messed up the return value and didn't break VMA scan early ianymore when MPOL_MF_STRICT alone. The return value problem was fixed by commit a7f40cfe3b7a ("mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified"), but it broke the VMA walk early if unmovable page is met, it may cause some pages are not migrated as expected. The code should conceptually do: if (MPOL_MF_MOVE|MOVEALL) scan all vmas try to migrate the existing pages return success else if (MPOL_MF_MOVE* | MPOL_MF_STRICT) scan all vmas try to migrate the existing pages return -EIO if unmovable or migration failed else /* MPOL_MF_STRICT alone */ break early if meets unmovable and don't call mbind_range() at all else /* none of those flags */ check the ranges in test_walk, EFAULT without mbind_range() if discontig. Fixed the behavior. Link: https://lkml.kernel.org/r/20230920223242.3425775-1-yang@os.amperecomputing.com Fixes: a7f40cfe3b7a ("mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified") Signed-off-by: Yang Shi <yang@os.amperecomputing.com> Cc: Hugh Dickins <hughd@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Oscar Salvador <osalvador@suse.de> Cc: Rafael Aquini <aquini@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 30 September 2023, 00:20:48 UTC
45120b1 Jinjie Ruan 25 September 2023, 07:20:59 UTC mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions() When CONFIG_DAMON_VADDR_KUNIT_TEST=y and making CONFIG_DEBUG_KMEMLEAK=y and CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y, the below memory leak is detected. Since commit 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary variables"), the damon_destroy_ctx() is removed, but still call damon_new_target() and damon_new_region(), the damon_region which is allocated by kmem_cache_alloc() in damon_new_region() and the damon_target which is allocated by kmalloc in damon_new_target() are not freed. And the damon_region which is allocated in damon_new_region() in damon_set_regions() is also not freed. So use damon_destroy_target to free all the damon_regions and damon_target. unreferenced object 0xffff888107c9a940 (size 64): comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk 60 c7 9c 07 81 88 ff ff f8 cb 9c 07 81 88 ff ff `............... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff8881079cc740 (size 56): comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff888107c9ac40 (size 64): comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk a0 cc 9c 07 81 88 ff ff 78 a1 76 07 81 88 ff ff ........x.v..... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff8881079ccc80 (size 56): comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff888107c9af40 (size 64): comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.011s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk 20 a2 76 07 81 88 ff ff b8 a6 76 07 81 88 ff ff .v.......v..... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff88810776a200 (size 56): comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.011s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff88810776a740 (size 56): comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.025s) hex dump (first 32 bytes): 3d 00 00 00 00 00 00 00 3f 00 00 00 00 00 00 00 =.......?....... 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819bfcc2>] damon_set_regions+0x4c2/0x8e0 [<ffffffff819c7dbb>] damon_do_test_apply_three_regions.constprop.0+0xfb/0x3e0 [<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff888108038240 (size 64): comm "kunit_try_catch", pid 1075, jiffies 4294670600 (age 733.022s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 03 00 00 00 6b 6b 6b 6b ............kkkk 48 ad 76 07 81 88 ff ff 98 ae 76 07 81 88 ff ff H.v.......v..... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c898d>] damon_test_apply_three_regions4+0x1cd/0x210 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff88810776ad28 (size 56): comm "kunit_try_catch", pid 1075, jiffies 4294670600 (age 733.022s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819bfcc2>] damon_set_regions+0x4c2/0x8e0 [<ffffffff819c7dbb>] damon_do_test_apply_three_regions.constprop.0+0xfb/0x3e0 [<ffffffff819c898d>] damon_test_apply_three_regions4+0x1cd/0x210 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 Link: https://lkml.kernel.org/r/20230925072100.3725620-1-ruanjinjie@huawei.com Fixes: 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary variables") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 30 September 2023, 00:20:47 UTC
4597648 Michal Hocko 21 September 2023, 07:38:29 UTC mm, memcg: reconsider kmem.limit_in_bytes deprecation This reverts commits 86327e8eb94c ("memcg: drop kmem.limit_in_bytes") and partially reverts 58056f77502f ("memcg, kmem: further deprecate kmem.limit_in_bytes") which have incrementally removed support for the kernel memory accounting hard limit. Unfortunately it has turned out that there is still userspace depending on the existence of memory.kmem.limit_in_bytes [1]. The underlying functionality is not really required but the non-existent file just confuses the userspace which fails in the result. The patch to fix this on the userspace side has been submitted but it is hard to predict how it will propagate through the maze of 3rd party consumers of the software. Now, reverting alone 86327e8eb94c is not an option because there is another set of userspace which cannot cope with ENOTSUPP returned when writing to the file. Therefore we have to go and revisit 58056f77502f as well. There are two ways to go ahead. Either we give up on the deprecation and fully revert 58056f77502f as well or we can keep kmem.limit_in_bytes but make the write a noop and warn about the fact. This should work for both known breaking workloads which depend on the existence but do not depend on the hard limit enforcement. Note to backporters to stable trees. a8c49af3be5f ("memcg: add per-memcg total kernel memory stat") introduced in 4.18 has added memcg_account_kmem so the accounting is not done by obj_cgroup_charge_pages directly for v1 anymore. Prior kernels need to add it explicitly (thanks to Johannes for pointing this out). [akpm@linux-foundation.org: fix build - remove unused local] Link: http://lkml.kernel.org/r/20230920081101.GA12096@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net [1] Link: https://lkml.kernel.org/r/ZRE5VJozPZt9bRPy@dhcp22.suse.cz Fixes: 86327e8eb94c ("memcg: drop kmem.limit_in_bytes") Fixes: 58056f77502f ("memcg, kmem: further deprecate kmem.limit_in_bytes") Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Tejun heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 30 September 2023, 00:20:47 UTC
ca56489 Domenico Cerasuolo 22 September 2023, 17:22:11 UTC mm: zswap: fix potential memory corruption on duplicate store While stress-testing zswap a memory corruption was happening when writing back pages. __frontswap_store used to check for duplicate entries before attempting to store a page in zswap, this was because if the store fails the old entry isn't removed from the tree. This change removes duplicate entries in zswap_store before the actual attempt. [cerasuolodomenico@gmail.com: add a warning and a comment, per Johannes] Link: https://lkml.kernel.org/r/20230925130002.1929369-1-cerasuolodomenico@gmail.com Link: https://lkml.kernel.org/r/20230922172211.1704917-1-cerasuolodomenico@gmail.com Fixes: 42c06a0e8ebe ("mm: kill frontswap") Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Nhat Pham <nphamcs@gmail.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 30 September 2023, 00:20:47 UTC
6f1bace Ryan Roberts 22 September 2023, 11:58:04 UTC arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries When called with a swap entry that does not embed a PFN (e.g. PTE_MARKER_POISONED or PTE_MARKER_UFFD_WP), the previous implementation of set_huge_pte_at() would either cause a BUG() to fire (if CONFIG_DEBUG_VM is enabled) or cause a dereference of an invalid address and subsequent panic. arm64's huge pte implementation supports multiple huge page sizes, some of which are implemented in the page table with multiple contiguous entries. So set_huge_pte_at() needs to work out how big the logical pte is, so that it can also work out how many physical ptes (or pmds) need to be written. It previously did this by grabbing the folio out of the pte and querying its size. However, there are cases when the pte being set is actually a swap entry. But this also used to work fine, because for huge ptes, we only ever saw migration entries and hwpoison entries. And both of these types of swap entries have a PFN embedded, so the code would grab that and everything still worked out. But over time, more calls to set_huge_pte_at() have been added that set swap entry types that do not embed a PFN. And this causes the code to go bang. The triggering case is for the uffd poison test, commit 99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") - added in v6.5-rc7. Although review shows that there are other call sites that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger on arm64 because arm64 doesn't support UFFD WP. Arguably, the root cause is really due to commit 18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), which aimed to simplify the interface to the core code by removing set_huge_swap_pte_at() (which took a page size parameter) and replacing it with calls to set_huge_pte_at() where the size was inferred from the folio, as descibed above. While that commit didn't break anything at the time, it did break the interface because it couldn't handle swap entries without PFNs. And since then new callers have come along which rely on this working. But given the brokeness is only observable after commit 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs"), that one gets the Fixes tag. Now that we have modified the set_huge_pte_at() interface to pass the huge page size in the previous patch, we can trivially fix this issue. Link: https://lkml.kernel.org/r/20230922115804.2043771-3-ryan.roberts@arm.com Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Axel Rasmussen <axelrasmussen@google.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> [6.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 30 September 2023, 00:20:47 UTC
935d4f0 Ryan Roberts 22 September 2023, 11:58:03 UTC mm: hugetlb: add huge page size param to set_huge_pte_at() Patch series "Fix set_huge_pte_at() panic on arm64", v2. This series fixes a bug in arm64's implementation of set_huge_pte_at(), which can result in an unprivileged user causing a kernel panic. The problem was triggered when running the new uffd poison mm selftest for HUGETLB memory. This test (and the uffd poison feature) was merged for v6.5-rc7. Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable (correctly this time) to get it backported to v6.5, where the issue first showed up. Description of Bug ================== arm64's huge pte implementation supports multiple huge page sizes, some of which are implemented in the page table with multiple contiguous entries. So set_huge_pte_at() needs to work out how big the logical pte is, so that it can also work out how many physical ptes (or pmds) need to be written. It previously did this by grabbing the folio out of the pte and querying its size. However, there are cases when the pte being set is actually a swap entry. But this also used to work fine, because for huge ptes, we only ever saw migration entries and hwpoison entries. And both of these types of swap entries have a PFN embedded, so the code would grab that and everything still worked out. But over time, more calls to set_huge_pte_at() have been added that set swap entry types that do not embed a PFN. And this causes the code to go bang. The triggering case is for the uffd poison test, commit 99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") - added in v6.5-rc7. Although review shows that there are other call sites that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger on arm64 because arm64 doesn't support UFFD WP. If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise, it will dereference a bad pointer in page_folio(): static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry) { VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry)); return page_folio(pfn_to_page(swp_offset_pfn(entry))); } Fix === The simplest fix would have been to revert the dodgy cleanup commit 18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since things have moved on, this would have required an audit of all the new set_huge_pte_at() call sites to see if they should be converted to set_huge_swap_pte_at(). As per the original intent of the change, it would also leave us open to future bugs when people invariably get it wrong and call the wrong helper. So instead, I've added a huge page size parameter to set_huge_pte_at(). This means that the arm64 code has the size in all cases. It's a bigger change, due to needing to touch the arches that implement the function, but it is entirely mechanical, so in my view, low risk. I've compile-tested all touched arches; arm64, parisc, powerpc, riscv, s390, sparc (and additionally x86_64). I've additionally booted and run mm selftests against arm64, where I observe the uffd poison test is fixed, and there are no other regressions. This patch (of 2): In order to fix a bug, arm64 needs to be told the size of the huge page for which the pte is being set in set_huge_pte_at(). Provide for this by adding an `unsigned long sz` parameter to the function. This follows the same pattern as huge_pte_clear(). This commit makes the required interface modifications to the core mm as well as all arches that implement this function (arm64, parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed in a separate commit. No behavioral changes intended. Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx] Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change] Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> [6.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 30 September 2023, 00:20:47 UTC
a8091f0 Liam R. Howlett 21 September 2023, 18:12:36 UTC maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states When updating the maple tree iterator to avoid rewalks, an issue was introduced when shifting beyond the limits. This can be seen by trying to go to the previous address of 0, which would set the maple node to MAS_NONE and keep the range as the last entry. Subsequent calls to mas_find() would then search upwards from mas->last and skip the value at mas->index/mas->last. This showed up as a bug in mprotect which skips the actual VMA at the current range after attempting to go to the previous VMA from 0. Since MAS_NONE may already be set when searching for a value that isn't contained within a node, changing the handling of MAS_NONE in mas_find() would make the code more complicated and error prone. Furthermore, there was no way to tell which limit was hit, and thus which action to take (next or the entry at the current range). This solution is to add two states to track what happened with the previous iterator action. This allows for the expected behaviour of the next command to return the correct item (either the item at the range requested, or the next/previous). Tests are also added and updated accordingly. Link: https://lkml.kernel.org/r/20230921181236.509072-3-Liam.Howlett@oracle.com Link: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b Link: https://lore.kernel.org/linux-mm/20230921181236.509072-1-Liam.Howlett@oracle.com/ Fixes: 39193685d585 ("maple_tree: try harder to keep active node with mas_prev()") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Pedro Falcato <pedro.falcato@gmail.com> Closes: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b Closes: https://bugs.archlinux.org/task/79656 Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 30 September 2023, 00:20:46 UTC
5c59080 Liam R. Howlett 21 September 2023, 18:12:35 UTC maple_tree: add mas_is_active() to detect in-tree walks Patch series "maple_tree: Fix mas_prev() state regression". Pedro Falcato retported an mprotect regression [1] which was bisected back to the iterator changes for maple tree. Root cause analysis showed the mas_prev() running off the end of the VMA space (previous from 0) followed by mas_find(), would skip the first value. This patchset introduces maple state underflow/overflow so the sequence of calls on the maple state will return what the user expects. Users who encounter this bug may see mprotect(), userfaultfd_register(), and mlock() fail on VMAs mapped with address 0. This patch (of 2): Instead of constantly checking each possibility of the maple state, create a fast path that will skip over checking unlikely states. Link: https://lkml.kernel.org/r/20230921181236.509072-1-Liam.Howlett@oracle.com Link: https://lkml.kernel.org/r/20230921181236.509072-2-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Pedro Falcato <pedro.falcato@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 30 September 2023, 00:20:46 UTC
7ee29fa Pan Bian 21 September 2023, 14:17:31 UTC nilfs2: fix potential use after free in nilfs_gccache_submit_read_data() In nilfs_gccache_submit_read_data(), brelse(bh) is called to drop the reference count of bh when the call to nilfs_dat_translate() fails. If the reference count hits 0 and its owner page gets unlocked, bh may be freed. However, bh->b_page is dereferenced to put the page after that, which may result in a use-after-free bug. This patch moves the release operation after unlocking and putting the page. NOTE: The function in question is only called in GC, and in combination with current userland tools, address translation using DAT does not occur in that function, so the code path that causes this issue will not be executed. However, it is possible to run that code path by intentionally modifying the userland GC library or by calling the GC ioctl directly. [konishi.ryusuke@gmail.com: NOTE added to the commit log] Link: https://lkml.kernel.org/r/1543201709-53191-1-git-send-email-bianpan2016@163.com Link: https://lkml.kernel.org/r/20230921141731.10073-1-konishi.ryusuke@gmail.com Fixes: a3d93f709e89 ("nilfs2: block cache for garbage collection") Signed-off-by: Pan Bian <bianpan2016@163.com> Reported-by: Ferry Meng <mengferry@linux.alibaba.com> Closes: https://lkml.kernel.org/r/20230818092022.111054-1-mengferry@linux.alibaba.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 30 September 2023, 00:20:46 UTC
ce60f27 Matthew Wilcox (Oracle) 20 September 2023, 04:09:58 UTC mm: abstract moving to the next PFN In order to fix the L1TF vulnerability, x86 can invert the PTE bits for PROT_NONE VMAs, which means we cannot move from one PTE to the next by adding 1 to the PFN field of the PTE. This results in the BUG reported at [1]. Abstract advancing the PTE to the next PFN through a pte_next_pfn() function/macro. Link: https://lkml.kernel.org/r/20230920040958.866520-1-willy@infradead.org Fixes: bcc6cc832573 ("mm: add default definition of set_ptes()") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by: syzbot+55cc72f8cc3a549119df@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/000000000000d099fa0604f03351@google.com [1] Reviewed-by: Yin Fengwei <fengwei.yin@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 30 September 2023, 00:20:46 UTC
a501a07 Matthew Wilcox (Oracle) 20 September 2023, 03:53:35 UTC mm: report success more often from filemap_map_folio_range() Even though we had successfully mapped the relevant page, we would rarely return success from filemap_map_folio_range(). That leads to falling back from the VMA lock path to the mmap_lock path, which is a speed & scalability issue. Found by inspection. Link: https://lkml.kernel.org/r/20230920035336.854212-1-willy@infradead.org Fixes: 617c28ecab22 ("filemap: batch PTE mappings") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Yin Fengwei <fengwei.yin@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 30 September 2023, 00:20:45 UTC
7c31515 Greg Ungerer 07 September 2023, 01:18:08 UTC fs: binfmt_elf_efpic: fix personality for ELF-FDPIC The elf-fdpic loader hard sets the process personality to either PER_LINUX_FDPIC for true elf-fdpic binaries or to PER_LINUX for normal ELF binaries (in this case they would be constant displacement compiled with -pie for example). The problem with that is that it will lose any other bits that may be in the ELF header personality (such as the "bug emulation" bits). On the ARM architecture the ADDR_LIMIT_32BIT flag is used to signify a normal 32bit binary - as opposed to a legacy 26bit address binary. This matters since start_thread() will set the ARM CPSR register as required based on this flag. If the elf-fdpic loader loses this bit the process will be mis-configured and crash out pretty quickly. Modify elf-fdpic loader personality setting so that it preserves the upper three bytes by using the SET_PERSONALITY macro to set it. This macro in the generic case sets PER_LINUX and preserves the upper bytes. Architectures can override this for their specific use case, and ARM does exactly this. The problem shows up quite easily running under qemu using the ARM architecture, but not necessarily on all types of real ARM hardware. If the underlying ARM processor does not support the legacy 26-bit addressing mode then everything will work as expected. Link: https://lkml.kernel.org/r/20230907011808.2985083-1-gerg@kernel.org Fixes: 1bde925d23547 ("fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries") Signed-off-by: Greg Ungerer <gerg@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Ungerer <gerg@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 30 September 2023, 00:20:45 UTC
9f3ebbe Linus Torvalds 29 September 2023, 23:51:38 UTC Merge tag '6.6-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd Pull smb server fixes from Steve French: "Two SMB3 server fixes for null pointer dereferences: - invalid SMB3 request case (fixes issue found in testing the read compound patch) - iovec error case in response processing" * tag '6.6-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: check iov vector index in ksmbd_conn_write() ksmbd: return invalid parameter error response if smb2 request is invalid 29 September 2023, 23:51:38 UTC
14c06b9 Linus Torvalds 29 September 2023, 23:46:24 UTC Merge tag 'ceph-for-6.6-rc4' of https://github.com/ceph/ceph-client Pull ceph fixes from Ilya Dryomov: "A series that fixes an involved 'double watch error' deadlock in RBD marked for stable and two cleanups" * tag 'ceph-for-6.6-rc4' of https://github.com/ceph/ceph-client: rbd: take header_rwsem in rbd_dev_refresh() only when updating rbd: decouple parent info read-in from updating rbd_dev rbd: decouple header read-in from updating rbd_dev->header rbd: move rbd_dev_refresh() definition Revert "ceph: make members in struct ceph_mds_request_args_ext a union" ceph: remove unnecessary check for NULL in parse_longname() 29 September 2023, 23:46:24 UTC
10c0b6b Linus Torvalds 29 September 2023, 23:41:25 UTC Merge tag 'xfs-6.6-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs fix from Chandan Babu: - fix for commit 68b957f64fca ("xfs: load uncached unlinked inodes into memory on demand") which address review comments provided by Dave Chinner * tag 'xfs-6.6-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix reloading entire unlinked bucket lists 29 September 2023, 23:41:25 UTC
b0b88a5 Uwe Kleine-König 28 September 2023, 07:06:52 UTC MAINTAINERS: Fix Florian Fainelli's email address Commit 31345a0f5901 ("MAINTAINERS: Replace my email address") added 13 instances of ...@broadcom.com and one of only ...@broadcom. I didn't double check if Broadcom really owns that TLD, but git send-email doesn't accept it, so add ".com" to that one bogous(?) instance. Fixes: 31345a0f5901 ("MAINTAINERS: Replace my email address") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 29 September 2023, 21:49:18 UTC
95289e4 Linus Torvalds 29 September 2023, 20:38:34 UTC Merge tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA fixes from Damien Le Moal: "A larger than usual set of fixes for 6.6-rc4 due to the unexpected number of fixes needed to address ATA disks suspend/resume issues. In more detail: - Add missing additionalProperties on child nodes to the pata-common DT bindings (Rob) - Fix handling of the REPORT SUPPORTED OPERATION CODES command to ignore reserved bits (Niklas) - Increase port multiplier soft reset timeout to accomodate slow devices and avoid issues on wakeup (Matthias) - A couple of minor code fixes to avoid compilation warnings in libata-core and libata-eh (me) - Many patches from me to address suspend/resume issues, and in particular a potential deadlock on resume due to the SCSI disk driver resume operation not being synchronized with libata EH port resume handling. This is addressed by changing the scsi disk driver disk start/stop control to allow libata to execute disk suspend (spin down) and resume (spin up) on its own during system suspend/resume. Runtime suspend/resume control remains with the SCSI disk driver. Other fixes include: - Fix libata power management request issuing to avoid races - Establish a link between ATA ports and SCSI devices to order PM operations - Fix device removal to avoid issues with driver rmmod removal - Fix synchronization of libata device rescan and SCSI disk resume operation - Remove libsas PM operations as suspend/resume is handled directly by the sas controller resume - Fix the SCSI disk driver to not issue commands to suspended disks, thus avoiding potential system lock-up on resume" * tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-eh: Fix compilation warning in ata_eh_link_report() ata: libata-core: Fix compilation warning in ata_dev_config_ncq() scsi: sd: Do not issue commands to suspended disks on shutdown ata: libata-core: Do not register PM operations for SAS ports ata: libata-scsi: Fix delayed scsi_rescan_device() execution scsi: Do not attempt to rescan suspended devices ata: libata-scsi: Disable scsi device manage_system_start_stop scsi: sd: Differentiate system and runtime start/stop management ata: libata-scsi: link ata port and scsi device ata: libata-core: Fix port and device removal ata: libata-core: Fix ata_port_request_pm() locking ata: libata-sata: increase PMP SRST timeout to 10s ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes 29 September 2023, 20:38:34 UTC
eafdc50 Linus Torvalds 29 September 2023, 20:28:49 UTC Merge tag 'block-6.6-2023-09-28' of git://git.kernel.dk/linux Pull block fixes from Jens Axboe: "Just two minor comment / documentation fixes for the block side" * tag 'block-6.6-2023-09-28' of git://git.kernel.dk/linux: block: fix kernel-doc for disk_force_media_change() block: correct stale comment in rq_qos_wait 29 September 2023, 20:28:49 UTC
a98b959 Linus Torvalds 29 September 2023, 19:56:34 UTC Merge tag 'io_uring-6.6-2023-09-28' of git://git.kernel.dk/linux Pull io_uring fix from Jens Axboe: "A single fix going to stable for the IORING_OP_LINKAT flag handling" * tag 'io_uring-6.6-2023-09-28' of git://git.kernel.dk/linux: io_uring/fs: remove sqe->rw_flags checking from LINKAT 29 September 2023, 19:56:34 UTC
1c84724 Linus Torvalds 29 September 2023, 19:10:12 UTC Merge tag 'slab-fixes-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab fixes from Vlastimil Babka: - stable fix to prevent list corruption when destroying caches with leftover objects (Rafael Aquini) - fix for a gotcha in kmalloc_size_roundup() when calling it with too high size, discovered when recently a networking call site had to be fixed for a different issue (David Laight) * tag 'slab-fixes-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: slab: kmalloc_size_roundup() must not return 0 for non-zero size mm/slab_common: fix slab_caches list corruption after kmem_cache_destroy() 29 September 2023, 19:10:12 UTC
6edc84b Linus Torvalds 29 September 2023, 17:24:49 UTC Merge tag 'drm-fixes-2023-09-29' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Regular pull, this feel suspiciously light so I expect next week might be a bit heavier? Let's see how we go. This is from a code point of view ivpu and i915 fixes. The only other patch is adding Danilo Krummrich to the nouveau maintainers, he's agreed to take on more of the roll after Ben retired. MAINTAINERS: - add Danilo for nouveau ivpu: - Add PCI ids for Arrow Lake - Fix memory corruption during IPC - Avoid dmesg flooding - 40xx: Wait for clock resource - 40xx: Fix interrupt usage - 40xx: Support caching when loading firmware i915: - Fix a panic regression on gen8_ggtt_insert_entries - Fix load issue due to reservation address in ggtt_reserve_guc_top - Fix a possible deadlock with guc busyness worker" * tag 'drm-fixes-2023-09-29' of git://anongit.freedesktop.org/drm/drm: accel/ivpu: Use cached buffers for FW loading accel/ivpu/40xx: Fix missing VPUIP interrupts accel/ivpu/40xx: Disable frequency change interrupt accel/ivpu/40xx: Ensure clock resource ownership Ack before Power-Up accel/ivpu: Don't flood dmesg with VPU ready message accel/ivpu: Do not use wait event interruptible MAINTAINERS: update nouveau maintainers i915/guc: Get runtime pm in busyness worker only if already active drm/i915/gt: Fix reservation address in ggtt_reserve_guc_top i915: Limit the length of an sg list to the requested length accel/ivpu: Add Arrow Lake pci id 29 September 2023, 17:24:49 UTC
71e5865 Linus Torvalds 29 September 2023, 16:25:23 UTC Merge tag 'gpio-fixes-for-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix a potential spinlock deadlock in gpio-timberdale - mark the gpio-pmic-eic-sprd driver as one that can sleep * tag 'gpio-fixes-for-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: pmic-eic-sprd: Add can_sleep flag for PMIC EIC chip gpio: timberdale: Fix potential deadlock on &tgpio->lock 29 September 2023, 16:25:23 UTC
acfdcae Linus Torvalds 29 September 2023, 15:55:21 UTC Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A bunch of clk driver fixes for issues found recently: - Fix the binding for versaclock3 that was introduced this merge window so we know what the values are for clk consumers - Fix a 64-bit division issue in the versaclock3 driver - Avoid breakage in the versaclock3 driver by rejiggering the enums used to layout clks - Fix the parent name of a clk in the Spreadtrum ums512 clk driver - Fix a suspend/resume issue in Skyworks Si521xx clk driver where regmap restoration fails because writes are wedged - Return zero from Tegra bpmp recalc_rate() implementation when an error occurs so we don't consider an error as a large rate" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: tegra: fix error return case for recalc_rate clk: si521xx: Fix regmap write accessor clk: si521xx: Use REGCACHE_FLAT instead of NONE clk: sprd: Fix thm_parents incorrect configuration clk: vc3: Make vc3_clk_mux enum values based on vc3_clk enum values clk: vc3: Fix output clock mapping clk: vc3: Fix 64 by 64 division dt-bindings: clock: versaclock3: Add description for #clock-cells property 29 September 2023, 15:55:21 UTC
94b7ed3 Linus Torvalds 29 September 2023, 15:51:57 UTC Merge tag 'for-v6.6-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply fixes from Sebastian Reichel: - core: fix use after free during device release - ab8500: avoid reporting multiple batteries to userspace - rk817: fix DT node resource leak - misc. small fixes, mostly for compiler warnings/errors * tag 'for-v6.6-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: rk817: Fix node refcount leak power: supply: core: fix use after free in uevent power: supply: rt9467: Fix rt9467_run_aicl() power: supply: rk817: Add missing module alias power: supply: ucs1002: fix error code in ucs1002_get_property() power: vexpress: fix -Wvoid-pointer-to-enum-cast warning power: reset: use capital "OR" for multiple licenses in SPDX pwr-mlxbf: extend Kconfig to include gpio-mlxbf3 dependency power: supply: rt5033_charger: recognize EXTCON setting power: supply: mt6370: Fix missing error code in mt6370_chg_toggle_cfo() power: supply: ab8500: Set typing and props 29 September 2023, 15:51:57 UTC
b02afe1 Linus Torvalds 29 September 2023, 15:41:56 UTC Merge tag 'xtensa-20230928' of https://github.com/jcmvbkbc/linux-xtensa Pull Xtensa fixes from Max Filippov: - fix build warnings from builds performed with W=1 * tag 'xtensa-20230928' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: boot/lib: fix function prototypes xtensa: umulsidi3: fix conditional expression xtensa: boot: don't add include-dirs xtensa: iss/network: make functions static xtensa: tlb: include <asm/tlb.h> for missing prototype xtensa: hw_breakpoint: include header for missing prototype xtensa: smp: add headers for missing function prototypes irqchip: irq-xtensa-mx: include header for missing prototype xtensa: traps: add <linux/cpu.h> for function prototype xtensa: stacktrace: include <asm/ftrace.h> for prototype xtensa: signal: include headers for function prototypes xtensa: processor.h: add init_arch() prototype xtensa: ptrace: add prototypes to <asm/ptrace.h> xtensa: irq: include <asm/traps.h> xtensa: fault: include <asm/traps.h> xtensa: add default definition for XCHAL_HAVE_DIV32 29 September 2023, 15:41:56 UTC
a52d4f6 Jens Axboe 28 September 2023, 15:23:27 UTC io_uring/fs: remove sqe->rw_flags checking from LINKAT This is unionized with the actual link flags, so they can of course be set and they will be evaluated further down. If not we fail any LINKAT that has to set option flags. Fixes: cf30da90bc3a ("io_uring: add support for IORING_OP_LINKAT") Cc: stable@vger.kernel.org Reported-by: Thomas Leonard <talex5@gmail.com> Link: https://github.com/axboe/liburing/issues/955 Signed-off-by: Jens Axboe <axboe@kernel.dk> 29 September 2023, 09:07:09 UTC
06365a0 Dave Airlie 29 September 2023, 00:28:07 UTC Merge tag 'drm-intel-fixes-2023-09-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix a panic regression on gen8_ggtt_insert_entries (Matthew Wilcox) - Fix load issue due to reservation address in ggtt_reserve_guc_top (Javier Pello) - Fix a possible deadlock with guc busyness worker (Umesh) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZRWMI1HmUYPGGylp@intel.com 29 September 2023, 00:28:21 UTC
c6c2adc Haitao Huang 28 July 2023, 05:10:24 UTC x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race The SGX EPC reclaimer (ksgxd) may reclaim the SECS EPC page for an enclave and set secs.epc_page to NULL. The SECS page is used for EAUG and ELDU in the SGX page fault handler. However, the NULL check for secs.epc_page is only done for ELDU, not EAUG before being used. Fix this by doing the same NULL check and reloading of the SECS page as needed for both EAUG and ELDU. The SECS page holds global enclave metadata. It can only be reclaimed when there are no other enclave pages remaining. At that point, virtually nothing can be done with the enclave until the SECS page is paged back in. An enclave can not run nor generate page faults without a resident SECS page. But it is still possible for a #PF for a non-SECS page to race with paging out the SECS page: when the last resident non-SECS page A triggers a #PF in a non-resident page B, and then page A and the SECS both are paged out before the #PF on B is handled. Hitting this bug requires that race triggered with a #PF for EAUG. Following is a trace when it happens. BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:sgx_encl_eaug_page+0xc7/0x210 Call Trace: ? __kmem_cache_alloc_node+0x16a/0x440 ? xa_load+0x6e/0xa0 sgx_vma_fault+0x119/0x230 __do_fault+0x36/0x140 do_fault+0x12f/0x400 __handle_mm_fault+0x728/0x1110 handle_mm_fault+0x105/0x310 do_user_addr_fault+0x1ee/0x750 ? __this_cpu_preempt_check+0x13/0x20 exc_page_fault+0x76/0x180 asm_exc_page_fault+0x27/0x30 Fixes: 5a90d2c3f5ef ("x86/sgx: Support adding of pages to an initialized enclave") Signed-off-by: Haitao Huang <haitao.huang@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Kai Huang <kai.huang@intel.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20230728051024.33063-1-haitao.huang%40linux.intel.com 28 September 2023, 23:16:40 UTC
8c4a5e8 Dave Airlie 28 September 2023, 21:50:11 UTC Merge tag 'drm-misc-fixes-2023-09-28' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * ivpu: * Add PCI ids for Arrow Lake * Fix memory corruption during IPC * Avoid dmesg flooding * 40xx: Wait for clock resource * 40xx: Fix interrupt usage * 40xx: Support caching when loading firmware Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230928081208.GA7881@linux-uq9g 28 September 2023, 21:50:16 UTC
fc09027 Joel Fernandes (Google) 23 September 2023, 01:14:08 UTC sched/rt: Fix live lock between select_fallback_rq() and RT push During RCU-boost testing with the TREE03 rcutorture config, I found that after a few hours, the machine locks up. On tracing, I found that there is a live lock happening between 2 CPUs. One CPU has an RT task running, while another CPU is being offlined which also has an RT task running. During this offlining, all threads are migrated. The migration thread is repeatedly scheduled to migrate actively running tasks on the CPU being offlined. This results in a live lock because select_fallback_rq() keeps picking the CPU that an RT task is already running on only to get pushed back to the CPU being offlined. It is anyway pointless to pick CPUs for pushing tasks to if they are being offlined only to get migrated away to somewhere else. This could also add unwanted latency to this task. Fix these issues by not selecting CPUs in RT if they are not 'active' for scheduling, using the cpu_active_mask. Other parts in core.c already use cpu_active_mask to prevent tasks from being put on CPUs going offline. With this fix I ran the tests for days and could not reproduce the hang. Without the patch, I hit it in a few hours. Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Paul E. McKenney <paulmck@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230923011409.3522762-1-joel@joelfernandes.org 28 September 2023, 20:58:13 UTC
e6e43b8 Quang Le 28 September 2023, 17:44:13 UTC fs/smb/client: Reset password pointer to NULL Forget to reset ctx->password to NULL will lead to bug like double free Cc: stable@vger.kernel.org Cc: Willy Tarreau <w@1wt.eu> Reviewed-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Quang Le <quanglex97@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com> 28 September 2023, 19:49:51 UTC
9ed22ae Linus Torvalds 28 September 2023, 18:12:42 UTC Merge tag 'spi-fix-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small set of device specific fixes, the most major one is for the GXP driver which would probably have been confusing some callers with returning the length rather than 0 on successful writes" * tag 'spi-fix-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-gxp: BUG: Correct spi write return value dt-bindings: spi: fsl-imx-cspi: Document missing entries spi: cs42l43: Remove spurious pm_runtime_disable 28 September 2023, 18:12:42 UTC
5d95934 Linus Torvalds 28 September 2023, 17:27:45 UTC Merge tag 'loongarch-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix high_memory calculation and module loader errors with latest binutils" * tag 'loongarch-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Add support for 64_PCREL relocation type LoongArch: Add support for 32_PCREL relocation type LoongArch: Define relocation types for ABI v2.10 LoongArch: numa: Fix high_memory calculation 28 September 2023, 17:27:45 UTC
52a6d9b Linus Torvalds 28 September 2023, 17:24:26 UTC Merge tag 'mips-fixes_6.6_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fix from Thomas Bogendoerfer: - fix Alchemy build with MMC support disabled * tag 'mips-fixes_6.6_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Alchemy: only build mmc support helpers if au1xmmc is enabled 28 September 2023, 17:24:26 UTC
684f7e6 Geert Uytterhoeven 28 September 2023, 16:26:58 UTC iomap: Spelling s/preceeding/preceding/g Fix a misspelling of "preceding". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Bill O'Donnell <bodonnel@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> 28 September 2023, 16:26:58 UTC
0d32a6b Chuck Lever 27 September 2023, 17:16:48 UTC NFSD: Fix zero NFSv4 READ results when RQ_SPLICE_OK is not set nfsd4_encode_readv() uses xdr->buf->page_len as a starting point for the nfsd_iter_read() sink buffer -- page_len is going to be offset by the parts of the COMPOUND that have already been encoded into xdr->buf->pages. However, that value must be captured /before/ xdr_reserve_space_vec() advances page_len by the expected size of the read payload. Otherwise, the whole front part of the first page of the payload in the reply will be uninitialized. Mantas hit this because sec=krb5i forces RQ_SPLICE_OK off, which invokes the readv part of the nfsd4_encode_read() path. Also, older Linux NFS clients appear to send shorter READ requests for files smaller than a page, whereas newer clients just send page-sized requests and let the server send as many bytes as are in the file. Reported-by: Mantas Mikulėnas <grawity@gmail.com> Closes: https://lore.kernel.org/linux-nfs/f1d0b234-e650-0f6e-0f5d-126b3d51d1eb@gmail.com/ Fixes: 703d75215555 ("NFSD: Hoist rq_vec preparation into nfsd_read() [step two]") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> 28 September 2023, 14:34:28 UTC
49728bd Damien Le Moal 12 September 2023, 00:08:40 UTC ata: libata-eh: Fix compilation warning in ata_eh_link_report() The 6 bytes length of the tries_buf string in ata_eh_link_report() is too short and results in a gcc compilation warning with W-!: drivers/ata/libata-eh.c: In function ‘ata_eh_link_report’: drivers/ata/libata-eh.c:2371:59: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 4 [-Wformat-truncation=] 2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d", | ^~ drivers/ata/libata-eh.c:2371:56: note: directive argument in the range [-2147483648, 4] 2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d", | ^~~~~~ drivers/ata/libata-eh.c:2371:17: note: ‘snprintf’ output between 4 and 14 bytes into a destination of size 6 2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2372 | ap->eh_tries); | ~~~~~~~~~~~~~ Avoid this warning by increasing the string size to 16B. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> 28 September 2023, 12:24:18 UTC
ed518d9 Damien Le Moal 11 September 2023, 23:46:22 UTC ata: libata-core: Fix compilation warning in ata_dev_config_ncq() The 24 bytes length allocated to the ncq_desc string in ata_dev_config_lba() for ata_dev_config_ncq() to use is too short, causing the following gcc compilation warnings when compiling with W=1: drivers/ata/libata-core.c: In function ‘ata_dev_configure’: drivers/ata/libata-core.c:2378:56: warning: ‘%d’ directive output may be truncated writing between 1 and 2 bytes into a region of size between 1 and 11 [-Wformat-truncation=] 2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth, | ^~ In function ‘ata_dev_config_ncq’, inlined from ‘ata_dev_config_lba’ at drivers/ata/libata-core.c:2649:8, inlined from ‘ata_dev_configure’ at drivers/ata/libata-core.c:2952:9: drivers/ata/libata-core.c:2378:41: note: directive argument in the range [1, 32] 2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth, | ^~~~~~~~~~~~~~~~~~~~~ drivers/ata/libata-core.c:2378:17: note: ‘snprintf’ output between 16 and 31 bytes into a destination of size 24 2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2379 | ddepth, aa_desc); | ~~~~~~~~~~~~~~~~ Avoid these warnings and the potential truncation by changing the size of the ncq_desc string to 32 characters. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> 28 September 2023, 12:24:10 UTC
99398d2 Damien Le Moal 08 September 2023, 08:03:15 UTC scsi: sd: Do not issue commands to suspended disks on shutdown If an error occurs when resuming a host adapter before the devices attached to the adapter are resumed, the adapter low level driver may remove the scsi host, resulting in a call to sd_remove() for the disks of the host. This in turn results in a call to sd_shutdown() which will issue a synchronize cache command and a start stop unit command to spindown the disk. sd_shutdown() issues the commands only if the device is not already runtime suspended but does not check the power state for system-wide suspend/resume. That is, the commands may be issued with the device in a suspended state, which causes PM resume to hang, forcing a reset of the machine to recover. Fix this by tracking the suspended state of a disk by introducing the suspended boolean field in the scsi_disk structure. This flag is set to true when the disk is suspended is sd_suspend_common() and resumed with sd_resume(). When suspended is true, sd_shutdown() is not executed from sd_remove(). Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> 28 September 2023, 12:23:18 UTC
75e2bd5 Damien Le Moal 08 September 2023, 11:04:52 UTC ata: libata-core: Do not register PM operations for SAS ports libsas does its own domain based power management of ports. For such ports, libata should not use a device type defining power management operations as executing these operations for suspend/resume in addition to libsas calls to ata_sas_port_suspend() and ata_sas_port_resume() is not necessary (and likely dangerous to do, even though problems are not seen currently). Introduce the new ata_port_sas_type device_type for ports managed by libsas. This new device type is used in ata_tport_add() and is defined without power management operations. Fixes: 2fcbdcb4c802 ("[SCSI] libata: export ata_port suspend/resume infrastructure for sas") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> 28 September 2023, 12:23:14 UTC
8b4d946 Damien Le Moal 05 September 2023, 00:06:23 UTC ata: libata-scsi: Fix delayed scsi_rescan_device() execution Commit 6aa0365a3c85 ("ata: libata-scsi: Avoid deadlock on rescan after device resume") modified ata_scsi_dev_rescan() to check the scsi device "is_suspended" power field to ensure that the scsi device associated with an ATA device is fully resumed when scsi_rescan_device() is executed. However, this fix is problematic as: 1) It relies on a PM internal field that should not be used without PM device locking protection. 2) The check for is_suspended and the call to scsi_rescan_device() are not atomic and a suspend PM event may be triggered between them, casuing scsi_rescan_device() to be called on a suspended device and in that function blocking while holding the scsi device lock. This would deadlock a following resume operation. These problems can trigger PM deadlocks on resume, especially with resume operations triggered quickly after or during suspend operations. E.g., a simple bash script like: for (( i=0; i<10; i++ )); do echo "+2 > /sys/class/rtc/rtc0/wakealarm echo mem > /sys/power/state done that triggers a resume 2 seconds after starting suspending a system can quickly lead to a PM deadlock preventing the system from correctly resuming. Fix this by replacing the check on is_suspended with a check on the return value given by scsi_rescan_device() as that function will fail if called against a suspended device. Also make sure rescan tasks already scheduled are first cancelled before suspending an ata port. Fixes: 6aa0365a3c85 ("ata: libata-scsi: Avoid deadlock on rescan after device resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> 28 September 2023, 12:23:10 UTC
ff48b37 Damien Le Moal 15 September 2023, 06:00:13 UTC scsi: Do not attempt to rescan suspended devices scsi_rescan_device() takes a scsi device lock before executing a device handler and device driver rescan methods. Waiting for the completion of any command issued to the device by these methods will thus be done with the device lock held. As a result, there is a risk of deadlocking within the power management code if scsi_rescan_device() is called to handle a device resume with the associated scsi device not yet resumed. Avoid such situation by checking that the target scsi device is in the running state, that is, fully capable of executing commands, before proceeding with the rescan and bailout returning -EWOULDBLOCK otherwise. With this error return, the caller can retry rescaning the device after a delay. The state check is done with the device lock held and is thus safe against incoming suspend power management operations. Fixes: 6aa0365a3c85 ("ata: libata-scsi: Avoid deadlock on rescan after device resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> 28 September 2023, 12:23:07 UTC
aa3998d Damien Le Moal 26 August 2023, 00:43:39 UTC ata: libata-scsi: Disable scsi device manage_system_start_stop The introduction of a device link to create a consumer/supplier relationship between the scsi device of an ATA device and the ATA port of that ATA device fixes the ordering of system suspend and resume operations. For suspend, the scsi device is suspended first and the ata port after it. This is fine as this allows the synchronize cache and START STOP UNIT commands issued by the scsi disk driver to be executed before the ata port is disabled. For resume operations, the ata port is resumed first, followed by the scsi device. This allows having the request queue of the scsi device to be unfrozen after the ata port resume is scheduled in EH, thus avoiding to see new requests prematurely issued to the ATA device. Since libata sets manage_system_start_stop to 1, the scsi disk resume operation also results in issuing a START STOP UNIT command to the device being resumed so that the device exits standby power mode. However, restoring the ATA device to the active power mode must be synchronized with libata EH processing of the port resume operation to avoid either 1) seeing the start stop unit command being received too early when the port is not yet resumed and ready to accept commands, or after the port resume process issues commands such as IDENTIFY to revalidate the device. In this last case, the risk is that the device revalidation fails with timeout errors as the drive is still spun down. Commit 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") disabled issuing the START STOP UNIT command to avoid issues with it. But this is incorrect as transitioning a device to the active power mode from the standby power mode set on suspend requires a media access command. The IDENTIFY, READ LOG and SET FEATURES commands executed in libata EH context triggered by the ata port resume operation may thus fail. Fix these synchronization issues is by handling a device power mode transitions for system suspend and resume directly in libata EH context, without relying on the scsi disk driver management triggered with the manage_system_start_stop flag. To do this, the following libata helper functions are introduced: 1) ata_dev_power_set_standby(): This function issues a STANDBY IMMEDIATE command to transitiom a device to the standby power mode. For HDDs, this spins down the disks. This function applies only to ATA and ZAC devices and does nothing otherwise. This function also does nothing for devices that have the ATA_FLAG_NO_POWEROFF_SPINDOWN or ATA_FLAG_NO_HIBERNATE_SPINDOWN flag set. For suspend, call ata_dev_power_set_standby() in ata_eh_handle_port_suspend() before the port is disabled and frozen. ata_eh_unload() is also modified to transition all enabled devices to the standby power mode when the system is shutdown or devices removed. 2) ata_dev_power_set_active() and This function applies to ATA or ZAC devices and issues a VERIFY command for 1 sector at LBA 0 to transition the device to the active power mode. For HDDs, since this function will complete only once the disk spin up. Its execution uses the same timeouts as for reset, to give the drive enough time to complete spinup without triggering a command timeout. For resume, call ata_dev_power_set_active() in ata_eh_revalidate_and_attach() after the port has been enabled and before any other command is issued to the device. With these changes, the manage_system_start_stop and no_start_on_resume scsi device flags do not need to be set in ata_scsi_dev_config(). The flag manage_runtime_start_stop is still set to allow the sd driver to spinup/spindown a disk through the sd runtime operations. Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> 28 September 2023, 12:23:03 UTC
3cc2ffe Damien Le Moal 15 September 2023, 01:02:41 UTC scsi: sd: Differentiate system and runtime start/stop management The underlying device and driver of a SCSI disk may have different system and runtime power mode control requirements. This is because runtime power management affects only the SCSI disk, while system level power management affects all devices, including the controller for the SCSI disk. For instance, issuing a START STOP UNIT command when a SCSI disk is runtime suspended and resumed is fine: the command is translated to a STANDBY IMMEDIATE command to spin down the ATA disk and to a VERIFY command to wake it up. The SCSI disk runtime operations have no effect on the ata port device used to connect the ATA disk. However, for system suspend/resume operations, the ATA port used to connect the device will also be suspended and resumed, with the resume operation requiring re-validating the device link and the device itself. In this case, issuing a VERIFY command to spinup the disk must be done before starting to revalidate the device, when the ata port is being resumed. In such case, we must not allow the SCSI disk driver to issue START STOP UNIT commands. Allow a low level driver to refine the SCSI disk start/stop management by differentiating system and runtime cases with two new SCSI device flags: manage_system_start_stop and manage_runtime_start_stop. These new flags replace the current manage_start_stop flag. Drivers setting the manage_start_stop are modifed to set both new flags, thus preserving the existing start/stop management behavior. For backward compatibility, the old manage_start_stop sysfs device attribute is kept as a read-only attribute showing a value of 1 for devices enabling both new flags and 0 otherwise. Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> 28 September 2023, 12:23:00 UTC
fb99ef1 Damien Le Moal 25 August 2023, 06:41:14 UTC ata: libata-scsi: link ata port and scsi device There is no direct device ancestry defined between an ata_device and its scsi device which prevents the power management code from correctly ordering suspend and resume operations. Create such ancestry with the ata device as the parent to ensure that the scsi device (child) is suspended before the ata device and that resume handles the ata device before the scsi device. The parent-child (supplier-consumer) relationship is established between the ata_port (parent) and the scsi device (child) with the function device_add_link(). The parent used is not the ata_device as the PM operations are defined per port and the status of all devices connected through that port is controlled from the port operations. The device link is established with the new function ata_scsi_slave_alloc(), and this function is used to define the ->slave_alloc callback of the scsi host template of all ata drivers. Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: John Garry <john.g.garry@oracle.com> 28 September 2023, 12:22:57 UTC
84d7652 Damien Le Moal 26 August 2023, 04:07:36 UTC ata: libata-core: Fix port and device removal Whenever an ATA adapter driver is removed (e.g. rmmod), ata_port_detach() is called repeatedly for all the adapter ports to remove (unload) the devices attached to the port and delete the port device itself. Removing of devices is done using libata EH with the ATA_PFLAG_UNLOADING port flag set. This causes libata EH to execute ata_eh_unload() which disables all devices attached to the port. ata_port_detach() finishes by calling scsi_remove_host() to remove the scsi host associated with the port. This function will trigger the removal of all scsi devices attached to the host and in the case of disks, calls to sd_shutdown() which will flush the device write cache and stop the device. However, given that the devices were already disabled by ata_eh_unload(), the synchronize write cache command and start stop unit commands fail. E.g. running "rmmod ahci" with first removing sd_mod results in error messages like: ata13.00: disable device sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 0:0:0:0: [sda] Stopping disk sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK Fix this by removing all scsi devices of the ata devices connected to the port before scheduling libata EH to disable the ATA devices. Fixes: 720ba12620ee ("[PATCH] libata-hp: update unload-unplug") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> 28 September 2023, 12:22:53 UTC
3b8e0af Damien Le Moal 04 September 2023, 11:38:13 UTC ata: libata-core: Fix ata_port_request_pm() locking The function ata_port_request_pm() checks the port flag ATA_PFLAG_PM_PENDING and calls ata_port_wait_eh() if this flag is set to ensure that power management operations for a port are not scheduled simultaneously. However, this flag check is done without holding the port lock. Fix this by taking the port lock on entry to the function and checking the flag under this lock. The lock is released and re-taken if ata_port_wait_eh() needs to be called. The two WARN_ON() macros checking that the ATA_PFLAG_PM_PENDING flag was cleared are removed as the first call is racy and the second one done without holding the port lock. Fixes: 5ef41082912b ("ata: add ata port system PM callbacks") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> 28 September 2023, 12:22:50 UTC
a5ef7d6 Pu Wen 28 September 2023, 06:59:16 UTC x86/srso: Add SRSO mitigation for Hygon processors Add mitigation for the speculative return stack overflow vulnerability which exists on Hygon processors too. Signed-off-by: Pu Wen <puwen@hygon.cn> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/tencent_4A14812842F104E93AA722EC939483CEFF05@qq.com 28 September 2023, 07:57:07 UTC
d75e870 Krzysztof Kozlowski 01 September 2023, 11:57:32 UTC arm64: defconfig: enable syscon-poweroff driver Enable the generic syscon-poweroff driver used on all Exynos ARM64 SoCs (e.g. Exynos5433) and few APM SoCs. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20230901115732.45854-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> 28 September 2023, 07:17:05 UTC
5e8a380 Arnd Bergmann 27 September 2023, 19:38:10 UTC ARM: locomo: fix locomolcd_power declaration The locomolcd driver has one remaining missing-prototype warning: drivers/video/backlight/locomolcd.c:83:6: error: no previous prototype for 'locomolcd_power' [-Werror=missing-prototypes] There is in fact an unused prototype with a similar name in a global header, so move the actual one there and remove the old one. Link: https://lore.kernel.org/r/20230927194844.680771-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> 28 September 2023, 07:15:51 UTC
5106e65 Arnd Bergmann 28 September 2023, 07:15:12 UTC Merge tag 'scmi-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm SCMI fix for v6.6 A single fix to address scmi_perf_attributes_get() using the protocol version even before it was populated and ending up with unexpected bogowatts power scale. * tag 'scmi-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Fixup perf power-cost/microwatt support Link: https://lore.kernel.org/r/20230927121604.158645-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 28 September 2023, 07:15:12 UTC
79684f2 Arnd Bergmann 28 September 2023, 07:14:24 UTC Merge tag 'ffa-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm FF-A fix for v6.6 It has been reported that the driver sets the memory region attributes for MEM_LEND operation when the specification clearly states not to. The fix here addresses the issue by ensuring the memory region attributes are cleared for the memory lending operation. * tag 'ffa-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND Link: https://lore.kernel.org/r/20230927121555.158619-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 28 September 2023, 07:14:34 UTC
92e73d8 William A. Kennington III 24 September 2023, 01:02:14 UTC i2c: npcm7xx: Fix callback completion ordering Sometimes, our completions race with new master transfers and override the bus->operation and bus->master_or_slave variables. This causes transactions to timeout and kernel crashes less frequently. To remedy this, we re-order all completions to the very end of the function. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: William A. Kennington III <william@wkennington.com> Reviewed-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> 27 September 2023, 19:32:06 UTC
633b47c Linus Torvalds 27 September 2023, 16:58:02 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "A single fix for libata: older devices don't support command duration limits (CDL) and some don't support report opcodes, meaning there's no way to tell if they support the command or not. Reduce the problems of incorrectly using CDL commands on older devices by checking SCSI spec compliance at SPC-5 (the spec which introduced the command) before turning on CDL" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: ata: Do no try to probe for CDL on old drives 27 September 2023, 16:58:02 UTC
b6cd170 Linus Torvalds 27 September 2023, 16:33:55 UTC Merge tag 'vfio-v6.6-rc4' of https://github.com/awilliam/linux-vfio Pull VFIO fixes from Alex Williamson: - The new PDS vfio-pci variant driver only supports SR-IOV VF devices and incorrectly made a direct reference to the physfn field of the pci_dev. Fix this both by making the Kconfig depend on IOV support as well as using the correct wrapper for this access (Shixiong Ou) - Resolve an error path issue where on unwind of the mdev registration the created kset is not unregistered and the wrong error code is returned (Jinjie Ruan) * tag 'vfio-v6.6-rc4' of https://github.com/awilliam/linux-vfio: vfio/mdev: Fix a null-ptr-deref bug for mdev_unregister_parent() vfio/pds: Use proper PF device access helper vfio/pds: Add missing PCI_IOV depends 27 September 2023, 16:33:55 UTC
1a8196a Charles Kearney 20 September 2023, 21:53:39 UTC spi: spi-gxp: BUG: Correct spi write return value Bug fix to correct return value of gxp_spi_write function to zero. Completion of succesful operation should return zero. Fixes: 730bc8ba5e9e spi: spi-gxp: Add support for HPE GXP SoCs Signed-off-by: Charles Kearney <charles.kearney@hpe.com> Link: https://lore.kernel.org/r/20230920215339.4125856-2-charles.kearney@hpe.com Signed-off-by: Mark Brown <broonie@kernel.org> 27 September 2023, 15:06:36 UTC
1a6a464 Frederic Weisbecker 12 September 2023, 10:44:06 UTC timers: Tag (hr)timer softirq as hotplug safe Specific stress involving frequent CPU-hotplug operations, such as running rcutorture for example, may trigger the following message: NOHZ tick-stop error: local softirq work is pending, handler #02!!!" This happens in the CPU-down hotplug process, after CPUHP_AP_SMPBOOT_THREADS whose teardown callback parks ksoftirqd, and before the target CPU shuts down through CPUHP_AP_IDLE_DEAD. In this fragile intermediate state, softirqs waiting for threaded handling may be forever ignored and eventually reported by the idle task as in the above example. However some vectors are known to be safe as long as the corresponding subsystems have teardown callbacks handling the migration of their events. The above error message reports pending timers softirq although this vector can be considered as hotplug safe because the CPUHP_TIMERS_PREPARE teardown callback performs the necessary migration of timers after the death of the CPU. Hrtimers also have a similar hotplug handling. Therefore this error message, as far as (hr-)timers are concerned, can be considered spurious and the relevant softirq vectors can be marked as hotplug safe. Fixes: 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230912104406.312185-6-frederic@kernel.org 27 September 2023, 14:54:03 UTC
2d5780b Petr Tesarik 26 September 2023, 18:55:56 UTC swiotlb: fix the check whether a device has used software IO TLB When CONFIG_SWIOTLB_DYNAMIC=y, devices which do not use the software IO TLB can avoid swiotlb lookup. A flag is added by commit 1395706a1490 ("swiotlb: search the software IO TLB only if the device makes use of it"), the flag is correctly set, but it is then never checked. Add the actual check here. Note that this code is an alternative to the default pool check, not an additional check, because: 1. swiotlb_find_pool() also searches the default pool; 2. if dma_uses_io_tlb is false, the default swiotlb pool is not used. Tested in a KVM guest against a QEMU RAM-backed SATA disk over virtio and *not* using software IO TLB, this patch increases IOPS by approx 2% for 4-way parallel I/O. The write memory barrier in swiotlb_dyn_alloc() is not needed, because a newly allocated pool must always be observed by swiotlb_find_slots() before an address from that pool is passed to is_swiotlb_buffer(). Correctness was verified using the following litmus test: C swiotlb-new-pool (* * Result: Never * * Check that a newly allocated pool is always visible when the * corresponding swiotlb buffer is visible. *) { mem_pools = default; } P0(int **mem_pools, int *pool) { /* add_mem_pool() */ WRITE_ONCE(*pool, 999); rcu_assign_pointer(*mem_pools, pool); } P1(int **mem_pools, int *flag, int *buf) { /* swiotlb_find_slots() */ int *r0; int r1; rcu_read_lock(); r0 = READ_ONCE(*mem_pools); r1 = READ_ONCE(*r0); rcu_read_unlock(); if (r1) { WRITE_ONCE(*flag, 1); smp_mb(); } /* device driver (presumed) */ WRITE_ONCE(*buf, r1); } P2(int **mem_pools, int *flag, int *buf) { /* device driver (presumed) */ int r0 = READ_ONCE(*buf); /* is_swiotlb_buffer() */ int r1; int *r2; int r3; smp_rmb(); r1 = READ_ONCE(*flag); if (r1) { /* swiotlb_find_pool() */ rcu_read_lock(); r2 = READ_ONCE(*mem_pools); r3 = READ_ONCE(*r2); rcu_read_unlock(); } } exists (2:r0<>0 /\ 2:r3=0) (* Not found. *) Fixes: 1395706a1490 ("swiotlb: search the software IO TLB only if the device makes use of it") Reported-by: Jonathan Corbet <corbet@lwn.net> Closes: https://lore.kernel.org/linux-iommu/87a5uz3ob8.fsf@meer.lwn.net/ Signed-off-by: Petr Tesarik <petr@tesarici.cz> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> 27 September 2023, 09:19:15 UTC
a16d7a3 Arnd Bergmann 27 September 2023, 09:07:33 UTC Merge tag 'aspeed-6.6-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/fixes ASPEED Maintainers update Andrew has changed addresses and the git tree has long since been at a different location. * tag 'aspeed-6.6-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: MAINTAINERS: aspeed: Update Andrew's email address MAINTAINERS: aspeed: Update git tree URL Link: https://lore.kernel.org/r/CACPK8Xc+D=YBc2Dhk-6-gOuvKN0xGgZYNop6oJVa=VNgaEYOHw@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 27 September 2023, 09:07:33 UTC
a776cc4 Mingtong Bao 01 September 2023, 06:25:49 UTC soc: loongson: loongson2_guts: Remove unneeded semicolon No functional modification involved. ./drivers/soc/loongson/loongson2_guts.c:73:2-3: Unneeded semicolon. Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Mingtong Bao <baomingtong001@208suo.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 27 September 2023, 09:05:47 UTC
daacef8 Dongliang Mu 01 September 2023, 06:25:48 UTC soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource() Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 27 September 2023, 09:05:47 UTC
a2fd542 Binbin Zhou 31 August 2023, 11:43:25 UTC soc: loongson: loongson_pm2: Populate children syscon nodes The syscon poweroff and reboot nodes logically belong to the Power Management Unit so populate possible children. Without it, the reboot/poweroff feature becomes unavailable. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 27 September 2023, 09:05:19 UTC
8c4102f Binbin Zhou 31 August 2023, 11:43:24 UTC dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as child The reboot and poweroff features are actually part of the Power Management Unit system controller, thus allow them as its children, instead of specifying as separate device nodes with syscon phandle. Without it, the reboot/poweroff feature becomes unavailable. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 27 September 2023, 09:05:19 UTC
e26e788 Binbin Zhou 31 August 2023, 11:43:13 UTC soc: loongson: loongson_pm2: Drop useless of_device_id compatible Now, "loongson,ls2k0500-pmc" is used as fallback compatible, so the ls2k1000 compatible in the driver can be dropped directly. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 27 September 2023, 09:05:19 UTC
380054c Binbin Zhou 31 August 2023, 11:43:12 UTC dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatible The Loongson-2K series chips (ls2k0500/ls2k1000/ls2k2000) share the same PM system controller, using ls2k0500 compatible as fallback for the others. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 27 September 2023, 09:05:19 UTC
8e4a28f Binbin Zhou 31 August 2023, 11:43:11 UTC soc: loongson: loongson_pm2: Add dependency for INPUT Since commit 67694c076bd7 ("soc: loongson2_pm: add power management support"), the Loongson-2K PM driver was added, but it didn't update the Kconfig entry for the INPUT dependency, leading to build errors, so update the Kconfig entry to depend on INPUT. /opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: drivers/soc/loongson/loongson2_pm.o: in function `loongson2_power_button_init': /work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:101:(.text+0x350): undefined reference to `input_allocate_device' /opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: /work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:109:(.text+0x3dc): undefined reference to `input_set_capability' /opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: /work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:111:(.text+0x3e4): undefined reference to `input_register_device' /opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: /work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:125:(.text+0x3fc): undefined reference to `input_free_device' /opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: drivers/soc/loongson/loongson2_pm.o: in function `input_report_key': /work/lnx/next/linux-next-20230825/LOONG64/../include/linux/input.h:425:(.text+0x58c): undefined reference to `input_event' Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 27 September 2023, 09:05:19 UTC
68bb0c7 Arnd Bergmann 27 September 2023, 09:04:03 UTC Merge tag 'optee-for-for-v6.6' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Remove a few unused declarations in TEE subsystem * tag 'optee-for-for-v6.6' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: Remove unused declarations Link: https://lore.kernel.org/r/20230913083909.GA473533@rayden Signed-off-by: Arnd Bergmann <arnd@arndb.de> 27 September 2023, 09:04:04 UTC
c374e87 Arnd Bergmann 27 September 2023, 09:03:47 UTC Merge tag 'riscv-dt-fixes-for-v6.6-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes RISC-V Devicetree fixes for v6.6-rc3 Starfive: A fix for the size of the NOR flash that was causing complaints from the MTD subsystem during boot & two issues that a certain someone introduced while resolving merge conflicts. Of the latter, one is a cosmetic ordering change & the other lead to the usb controller being disabled. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-fixes-for-v6.6-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: starfive: visionfive 2: Fix uart0 pins sort order riscv: dts: starfive: visionfive 2: Enable usb0 riscv: dts: starfive: fix NOR flash reserved-data partition size Link: https://lore.kernel.org/r/20230916-previous-oversold-9d30891ac6cf@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de> 27 September 2023, 09:03:47 UTC
7d3e4e9 Mikko Rapeli 21 September 2023, 14:57:22 UTC arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y There is no code for this config option and enabling it in defconfig causes warnings from tools which are detecting unused and obsolete kernel config flags since the flag will be completely missing from effective build config after "make olddefconfig". Fixes yocto kernel recipe build time warning: WARNING: [kernel config]: This BSP contains fragments with warnings: ... [INFO]: the following symbols were not found in the active configuration: - CONFIG_COMMON_CLK_NPCM8XX The flag was added with commit 45472f1e5348c7b755b4912f2f529ec81cea044b v5.19-rc4-15-g45472f1e5348 so 6.1 and 6.4 stable kernel trees are affected. Fixes: 45472f1e5348c7b755b4912f2f529ec81cea044b ("arm64: defconfig: Add Nuvoton NPCM family support") Cc: stable@kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Bjorn Andersson <quic_bjorande@quicinc.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Tomer Maimon <tmaimon77@gmail.com> Cc: Bruce Ashfield <bruce.ashfield@gmail.com> Cc: Jon Mason <jon.mason@arm.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Ross Burton <ross@burtonini.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 27 September 2023, 09:03:25 UTC
48519d6 Arnd Bergmann 27 September 2023, 09:02:51 UTC Merge tag 'imx-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.6: - A couple of i.MX8MP device tree changes from Adam Ford to fix clock configuration regressions caused by 16c984524862 ("arm64: dts: imx8mp: don't initialize audio clocks from CCM node"). - Fix pmic-irq-hog GPIO line in imx93-tqma9352 device tree. - Fix a mmemory leak with error handling path of imx_dsp_setup_channels() in imx-dsp driver. - Fix HDMI node in imx8mm-evk device tree. - Add missing clock enable functionality for imx8mm_soc_uid() function in soc-imx8m driver. - Add missing imx8mm-prt8mm.dtb build target. * tag 'imx-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx: Add imx8mm-prt8mm.dtb to build arm64: dts: imx8mm-evk: Fix hdmi@3d node soc: imx8m: Enable OCOTP clock for imx8mm before reading registers arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock arm64: dts: imx8mp: Fix SDMA2/3 clocks arm64: dts: freescale: tqma9352: Fix gpio hog firmware: imx-dsp: Fix an error handling path in imx_dsp_setup_channels() Link: https://lore.kernel.org/r/20230926123710.GT7231@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de> 27 September 2023, 09:02:51 UTC
3c50ffb Arnd Bergmann 27 September 2023, 09:02:33 UTC Merge tag 'omap-for-v6.6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps and ti-sysc Fixes for several ti-sysc interconnect target module driver issues for external abort on non-linefetch, am35x soc match, and uart module quirks handling needed for devices to work and to allow device wake-up to work. Fixes for droid4 boot time errors and warnings as noticed after boot doing dmesg -lerr,warn. Let's also cut down the debug uart noise by using overrun-throttle-ms, and downgrade the u-boot version warnings to debug statements to further reduce the boot time noise with warnings. * tag 'omap-for-v6.6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix SYSC_QUIRK_SWSUP_SIDLE_ACT handling for uart wake-up ARM: omap2+: Downgrade u-boot version warnings to debug statements ARM: dts: ti: omap: Fix noisy serial with overrun-throttle-ms for mapphone ARM: dts: ti: omap: motorola-mapphone: Fix abe_clkctrl warning on boot ARM: dts: ti: omap: Fix bandgap thermal cells addressing for omap3/4 bus: ti-sysc: Fix missing AM35xx SoC matching bus: ti-sysc: Use fsleep() instead of usleep_range() in sysc_reset() Link: https://lore.kernel.org/r/pull-1695715881-95183@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 27 September 2023, 09:02:33 UTC
59a98f4 Randy Dunlap 26 September 2023, 00:35:48 UTC ARM: uniphier: fix cache kernel-doc warnings Fix kernel-doc warning(s) as reported by lkp: arch/arm/mm/cache-uniphier.c:72: warning: cannot understand function prototype: 'struct uniphier_cache_data ' cache-uniphier.c:82: warning: Function parameter or member 'way_ctrl_base' not described in 'uniphier_cache_data' Fixes: e7ecbc057bc5 ("ARM: uniphier: add outer cache support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: soc@kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Link: lore.kernel.org/r/202309260130.Uvwh8ceE-lkp@intel.com # fixes only one item Link: https://lore.kernel.org/r/20230926003548.22066-1-rdunlap@infradead.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> 27 September 2023, 09:02:14 UTC
back to top