https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
858fd16 Linux 6.4-rc6 11 June 2023, 21:35:30 UTC
4c60526 Merge tag 'x86_urgent_for_v6.4_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Borislav Petkov: - Set up the kernel CS earlier in the boot process in case EFI boots the kernel after bypassing the decompressor and the CS descriptor used ends up being the EFI one which is not mapped in the identity page table, leading to early SEV/SNP guest communication exceptions resulting in the guest crashing * tag 'x86_urgent_for_v6.4_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/head/64: Switch to KERNEL_CS as soon as new GDT is installed 11 June 2023, 17:14:02 UTC
65d7ca5 Merge tag '6.4-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd Pull smb server fixes from Steve French: "Five smb3 server fixes, all also for stable: - Fix four slab out of bounds warnings: improve checks for protocol id, and for small packet length, and for create context parsing, and for negotiate context parsing - Fix for incorrect dereferencing POSIX ACLs" * tag '6.4-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd: ksmbd: validate smb request protocol id ksmbd: check the validation of pdu_size in ksmbd_conn_handler_loop ksmbd: fix posix_acls and acls dereferencing possible ERR_PTR() ksmbd: fix out-of-bound read in parse_lease_state() ksmbd: fix out-of-bound read in deassemble_neg_contexts() 11 June 2023, 17:07:35 UTC
022ce88 Merge tag 'i2c-for-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Biggest news is that Andi Shyti steps in for maintaining the controller drivers. Thank you very much! Other than that, one new driver maintainer and the rest is usual driver bugfixes. at24 has a Kconfig dependecy fix" * tag 'i2c-for-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver eeprom: at24: also select REGMAP i2c: sprd: Delete i2c adapter in .remove's error path i2c: mv64xxx: Fix reading invalid status value in atomic mode i2c: designware: fix idx_write_cnt in read loop i2c: mchp-pci1xxxx: Avoid cast to incompatible function type i2c: img-scb: Fix spelling mistake "innacurate" -> "inaccurate" MAINTAINERS: Add myself as I2C host drivers maintainer 10 June 2023, 20:36:07 UTC
6be5e47 Merge tag 'soundwire-6.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire fixes from Vinod Koul: "Core fix for missing flag clear, error patch handling in qcom driver and BIOS quirk for HP Spectre x360: - HP Spectre x360 soundwire DMI quirk - Error path handling for qcom driver - Core fix for missing clear of alloc_slave_rt" * tag 'soundwire-6.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: stream: Add missing clear of alloc_slave_rt soundwire: qcom: add proper error paths in qcom_swrm_startup() soundwire: dmi-quirks: add new mapping for HP Spectre x360 10 June 2023, 20:21:04 UTC
859c745 Merge tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Most of the changes this time are for the Qualcomm Snapdragon platforms. There are bug fixes for error handling in Qualcomm icc-bwmon, rpmh-rsc, ramp_controller and rmtfs driver as well as the AMD tee firmware driver and a missing initialization in the Arm ff-a firmware driver. The Qualcomm RPMh and EDAC drivers need some rework to work correctly on all supported chips. The DT fixes include: - i.MX8 fixes for gpio, pinmux and clock settings - ADS touchscreen gpio polarity settings in several machines - Address dtb warnings for caches, panel and input-enable properties on Qualcomm platforms - Incorrect data on qualcomm platforms fir SA8155P power domains, SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire - Remoteproc firmware paths are corrected for Sony Xperia 10 IV" * tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits) firmware: arm_ffa: Set handle field to zero in memory descriptor ARM: dts: Fix erroneous ADS touchscreen polarities arm64: dts: imx8mn-beacon: Fix SPI CS pinmux arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals EDAC/qcom: Get rid of hardcoded register offsets EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup() arm64: dts: qcom: sm8550: Use the correct LLCC register scheme dt-bindings: cache: qcom,llcc: Fix SM8550 description arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards arm64: dts: qcom: sm8550: use uint16 for Soundwire interval soc: qcom: rpmhpd: Add SA8155P power domains arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains dt-bindings: power: qcom,rpmpd: Add SA8155P soc: qcom: Rename ice to qcom_ice to avoid module name conflict soc: qcom: rmtfs: Fix error code in probe() soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe() ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc ARM: at91: pm: fix imbalanced reference counter for ethernet devices arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths ... 10 June 2023, 20:01:09 UTC
6456952 Merge tag 'block-6.4-2023-06-09' of git://git.kernel.dk/linux Pull block fixes from Jens Axboe: - Fix an issue with the hardware queue nr_active, causing it to become imbalanced (Tian) - Fix an issue with null_blk not releasing pages if configured as memory backed (Nitesh) - Fix a locking issue in dasd (Jan) * tag 'block-6.4-2023-06-09' of git://git.kernel.dk/linux: s390/dasd: Use correct lock while counting channel queue length null_blk: Fix: memory release when memory_backed=1 blk-mq: fix blk_mq_hw_ctx active request accounting 09 June 2023, 21:21:20 UTC
dbfa18c Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio bug fixes from Michael Tsirkin: "A bunch of fixes all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: tools/virtio: use canonical ftrace path vhost_vdpa: support PACKED when setting-getting vring_base vhost: support PACKED when setting-getting vring_base vhost: Fix worker hangs due to missed wake up calls vhost: Fix crash during early vhost_transport_send_pkt calls vhost_net: revert upend_idx only on retriable error vhost_vdpa: tell vqs about the negotiated vdpa/mlx5: Fix hang when cvq commands are triggered during device unregister tools/virtio: Add .gitignore for ringtest tools/virtio: Fix arm64 ringtest compilation error vduse: avoid empty string for dev name vhost: use kzalloc() instead of kmalloc() followed by memset() 09 June 2023, 18:04:08 UTC
7e8c948 Merge tag 'ceph-for-6.4-rc6' of https://github.com/ceph/ceph-client Pull ceph fixes from Ilya Dryomov: "A fix for a potential data corruption in differential backup and snapshot-based mirroring scenarios in RBD and a reference counting fixup to avoid use-after-free in CephFS, all marked for stable" * tag 'ceph-for-6.4-rc6' of https://github.com/ceph/ceph-client: ceph: fix use-after-free bug for inodes when flushing capsnaps rbd: get snapshot context after exclusive lock is ensured to be held rbd: move RBD_OBJ_FLAG_COPYUP_ENABLED flag setting 09 June 2023, 17:53:58 UTC
ccc45cb s390/dasd: Use correct lock while counting channel queue length The lock around counting the channel queue length in the BIODASDINFO ioctl was incorrectly changed to the dasd_block->queue_lock with commit 583d6535cb9d ("dasd: remove dead code"). This can lead to endless list iterations and a subsequent crash. The queue_lock is supposed to be used only for queue lists belonging to dasd_block. For dasd_device related queue lists the ccwdev lock must be used. Fix the mentioned issues by correctly using the ccwdev lock instead of the queue lock. Fixes: 583d6535cb9d ("dasd: remove dead code") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20230609153750.1258763-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 09 June 2023, 17:35:52 UTC
0f506c7 Merge tag 'riscv-for-linus-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A fix to avoid ISA-disallowed privilege mappings that can result from WRITE+EXEC mmap requests from userspace. - A fix for kfence to handle the huge pages. - A fix to avoid converting misaligned VAs to huge pages. - ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE has been selected so kprobe can understand user pointers. * tag 'riscv-for-linus-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: fix kprobe __user string arg print fault issue riscv: Check the virtual alignment before choosing a map size riscv: Fix kfence now that the linear mapping can be backed by PUD/P4D/PGD riscv: mm: Ensure prot of VM_WRITE and VM_EXEC must be readable 09 June 2023, 16:36:17 UTC
87aceaa Merge tag 's390-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Alexander Gordeev: - Avoid linker error for randomly generated config file that has CONFIG_BRANCH_PROFILE_NONE enabled and make it similar to riscv, x86 and also to commit 4bf3ec384edf ("s390: disable branch profiling for vdso"). - Currently, if the device is offline and all the channel paths are either configured or varied offline, the associated subchannel gets unregistered. Don't unregister the subchannel, instead unregister offline device. * tag 's390-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/purgatory: disable branch profiling s390/cio: unregister device when the only path is gone 09 June 2023, 16:29:51 UTC
92d2221 Merge tag 'gpio-fixes-for-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "Two fixes for the GPIO testing module and one commit making Andy a reviewer for the GPIO subsystem: - fix a memory corruption bug in gpio-sim - fix inconsistencies in user-space configuration of gpio-sim - make Andy Shevchenko a reviewer for the GPIO subsystem" * tag 'gpio-fixes-for-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: MAINTAINERS: add Andy Shevchenko as reviewer for the GPIO subsystem gpio: sim: quietly ignore configured lines outside the bank gpio: sim: fix memory corruption when adding named lines and unnamed hogs 09 June 2023, 16:17:25 UTC
07496ee tools/virtio: use canonical ftrace path The canonical location for the tracefs filesystem is at /sys/kernel/tracing. But, from Documentation/trace/ftrace.rst: Before 4.1, all ftrace tracing control files were within the debugfs file system, which is typically located at /sys/kernel/debug/tracing. For backward compatibility, when mounting the debugfs file system, the tracefs file system will be automatically mounted at: /sys/kernel/debug/tracing A few spots in tools/virtio still refer to this older debugfs path, so let's update them to avoid confusion. Signed-off-by: Ross Zwisler <zwisler@google.com> Message-Id: <20230215223350.2658616-6-zwisler@google.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> 09 June 2023, 16:08:08 UTC
beee7fd vhost_vdpa: support PACKED when setting-getting vring_base Use the right structs for PACKED or split vqs when setting and getting the vring base. Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Message-Id: <20230424225031.18947-4-shannon.nelson@amd.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> 09 June 2023, 16:08:04 UTC
55d8122 vhost: support PACKED when setting-getting vring_base Use the right structs for PACKED or split vqs when setting and getting the vring base. Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Message-Id: <20230424225031.18947-3-shannon.nelson@amd.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> 09 June 2023, 16:07:52 UTC
333a396 Merge tag 'pinctrl-v6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fix from Linus Walleij: "A single fix for the Meson driver, nothing else has surfaced so far this cycle" * tag 'pinctrl-v6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: meson-axg: add missing GPIOA_18 gpio group 09 June 2023, 16:02:56 UTC
697fa9b Merge tag 'sound-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Lots of small fixes, and almost all are device-specific. A few of them are the fixes for the old regressions by the fast kctl lookups (introduced around 5.19). Others are ASoC simple-card fixes, selftest compile warning fixes, ASoC AMD quirks, various ASoC codec fixes as well as usual HD-audio quirks" * tag 'sound-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits) ALSA: hda/realtek: Enable 4 amplifiers instead of 2 on a HP platform ALSA: hda: Fix kctl->id initialization ALSA: gus: Fix kctl->id initialization ALSA: cmipci: Fix kctl->id initialization ALSA: ymfpci: Fix kctl->id initialization ALSA: ice1712,ice1724: fix the kcontrol->id initialization ALSA: hda/realtek: Add quirk for Clevo NS50AU ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41 ALSA: hda/realtek: Add "Intel Reference board" and "NUC 13" SSID in the ALC256 ALSA: hda/realtek: Add Lenovo P3 Tower platform ALSA: hda/realtek: Add a quirk for HP Slim Desktop S01 selftests: alsa: pcm-test: Fix compiler warnings about the format ASoC: fsl_sai: Enable BCI bit if SAI works on synchronous mode with BYP asserted ASoC: simple-card-utils: fix PCM constraint error check ASoC: cs35l56: Remove NULL check from cs35l56_sdw_dai_set_stream() ASoC: max98363: limit the number of channel to 1 ASoC: max98363: Removed 32bit support ASoC: mediatek: mt8195: fix use-after-free in driver remove path ASoC: mediatek: mt8188: fix use-after-free in driver remove path ASoC: amd: yc: Add Thinkpad Neo14 to quirks list for acp6x ... 09 June 2023, 15:38:22 UTC
8fc1c59 Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fix from Ted Ts'o: "Fix an ext4 regression which breaks remounting r/w file systems that have the quota feature enabled" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: only check dquot_initialize_needed() when debugging Revert "ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled" 09 June 2023, 15:23:01 UTC
33f3614 Merge tag 'at24-fixes-for-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current at24 fixes for v6.4-rc6 - fix a Kconfig issue (we need to select REGMAP, not only REGMAP_I2C) 09 June 2023, 15:14:33 UTC
5cdd5ec Merge tag 'imx-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.4, round 2: - Fix SPI CS pinmux for the final production version of imx8mn-beacon board. - Fix GPIOs for USDHC2 CD and WP signals on imx8qm-mek board. - Assign default clock rate for i.MX8 LPUARTs to fix UART failure. * tag 'imx-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mn-beacon: Fix SPI CS pinmux arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals Link: https://lore.kernel.org/r/20230607141312.GU4199@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de> 09 June 2023, 12:15:27 UTC
33f2b57 Merge tag 'drm-fixes-2023-06-09' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Bit busier and a bit more scattered than usual. amdgpu is the main one, with ivpu and msm having a few fixes, then i915, exynos, ast, lima, radeon with some misc bits, but overall nothing standing out. fb-helper: - Fill in fb-helper vars more correctly amdgpu: - S0ix fixes - GPU reset fixes - SMU13 fixes - SMU11 fixes - Misc Display fixes - Revert RV/RV2/PCO clock counter changes - Fix Stoney xclk value - Fix reserved vram debug info radeon: - Fix a potential use after free i915: - CDCLK voltage fix for ADL-P - eDP wake sync pulse fix - Two error handling fixes to selftests exynos: - Fix wrong return in Exynos vidi driver - Fix use-after-free issue to Exynos g2d driver ast: - resume and modeset fixes for ast ivpu: - Assorted ivpu fixes lima: - lima context destroy fix msm: - Fix max segment size to address splat on newer a6xx - Disable PSR by default w/ modparam to re-enable, since there still seems to be a lingering issue - Fix HPD issue - Fix issue with unitialized GMU mutex" * tag 'drm-fixes-2023-06-09' of git://anongit.freedesktop.org/drm/drm: (32 commits) drm/msm/a6xx: initialize GMU mutex earlier drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable accel/ivpu: Fix sporadic VPU boot failure accel/ivpu: Do not use mutex_lock_interruptible accel/ivpu: Do not trigger extra VPU reset if the VPU is idle drm/amd/display: Reduce sdp bw after urgent to 90% drm/amdgpu: change reserved vram info print drm/amdgpu: fix xclk freq on CHIP_STONEY drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl Revert "drm/amdgpu: switch to golden tsc registers for raven/raven2" Revert "drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to revision id" Revert "drm/amdgpu: change the reference clock for raven/raven2" drm/amd/display: add ODM case when looking for first split pipe drm/amd: Make lack of `ACPI_FADT_LOW_POWER_S0` or `CONFIG_AMD_PMC` louder during suspend path drm/amd/pm: conditionally disable pcie lane switching for some sienna_cichlid SKUs drm/amd/pm: Fix power context allocation in SMU13 drm/amdgpu: fix Null pointer dereference error in amdgpu_device_recover_vram drm/amd: Disallow s0ix without BIOS support again drm/i915/selftests: Add some missing error propagation drm/exynos: fix race condition UAF in exynos_g2d_exec_ioctl ... 09 June 2023, 02:14:10 UTC
9cd6357 Merge tag 'cgroup-for-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: - Fix css_set reference leaks on fork failures - Fix CPU hotplug locking in cgroup_transfer_tasks() which is used by cgroup1 cpuset - Doc update * tag 'cgroup-for-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Documentation: Clarify usage of memory limits cgroup: always put cset in cgroup_css_set_put_fork cgroup: fix missing cpus_read_{lock,unlock}() in cgroup_transfer_tasks() 09 June 2023, 01:52:54 UTC
986c34b Merge tag 'drm-msm-fixes-2023-06-08' of https://gitlab.freedesktop.org/drm/msm into drm-fixes A few more late fixes for v6.4-rc6 + Fix max segment size to address splat on newer a6xx + Disable PSR by default w/ modparam to re-enable, since there still seems to be a lingering issue + Fix HPD issue + Fix issue with unitialized GMU mutex Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGufjVZRNT6YfQ7YUXFC7Cz95wdLF7QHAYkiGfp+3Xc3DQ@mail.gmail.com 09 June 2023, 01:20:23 UTC
12abd73 drm/msm/a6xx: initialize GMU mutex earlier Move GMU mutex initialization earlier to make sure that it is always initialized. a6xx_destroy can be called from ther failure path before GMU initialization. This fixes the following backtrace: ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 0 PID: 58 at kernel/locking/mutex.c:582 __mutex_lock+0x1ec/0x3d0 Modules linked in: CPU: 0 PID: 58 Comm: kworker/u16:1 Not tainted 6.3.0-rc5-00155-g187c06436519 #565 Hardware name: Qualcomm Technologies, Inc. SM8350 HDK (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __mutex_lock+0x1ec/0x3d0 lr : __mutex_lock+0x1ec/0x3d0 sp : ffff800008993620 x29: ffff800008993620 x28: 0000000000000002 x27: ffff47b253c52800 x26: 0000000001000606 x25: ffff47b240bb2810 x24: fffffffffffffff4 x23: 0000000000000000 x22: ffffc38bba15ac14 x21: 0000000000000002 x20: ffff800008993690 x19: ffff47b2430cc668 x18: fffffffffffe98f0 x17: 6f74616c75676572 x16: 20796d6d75642067 x15: 0000000000000038 x14: 0000000000000000 x13: ffffc38bbba050b8 x12: 0000000000000666 x11: 0000000000000222 x10: ffffc38bbba603e8 x9 : ffffc38bbba050b8 x8 : 00000000ffffefff x7 : ffffc38bbba5d0b8 x6 : 0000000000000222 x5 : 000000000000bff4 x4 : 40000000fffff222 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff47b240cb1880 Call trace: __mutex_lock+0x1ec/0x3d0 mutex_lock_nested+0x2c/0x38 a6xx_destroy+0xa0/0x138 a6xx_gpu_init+0x41c/0x618 adreno_bind+0x188/0x290 component_bind_all+0x118/0x248 msm_drm_bind+0x1c0/0x670 try_to_bring_up_aggregate_device+0x164/0x1d0 __component_add+0xa8/0x16c component_add+0x14/0x20 dsi_dev_attach+0x20/0x2c dsi_host_attach+0x9c/0x144 devm_mipi_dsi_attach+0x34/0xac lt9611uxc_attach_dsi.isra.0+0x84/0xfc lt9611uxc_probe+0x5b8/0x67c i2c_device_probe+0x1ac/0x358 really_probe+0x148/0x2ac __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 deferred_probe_work_func+0x8c/0xc8 process_one_work+0x2bc/0x594 worker_thread+0x228/0x438 kthread+0x108/0x10c ret_from_fork+0x10/0x20 irq event stamp: 299345 hardirqs last enabled at (299345): [<ffffc38bb9ba61e4>] put_cpu_partial+0x1c8/0x22c hardirqs last disabled at (299344): [<ffffc38bb9ba61dc>] put_cpu_partial+0x1c0/0x22c softirqs last enabled at (296752): [<ffffc38bb9890434>] _stext+0x434/0x4e8 softirqs last disabled at (296741): [<ffffc38bb989669c>] ____do_softirq+0x10/0x1c ---[ end trace 0000000000000000 ]--- Fixes: 4cd15a3e8b36 ("drm/msm/a6xx: Make GPU destroy a bit safer") Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/531540/ Signed-off-by: Rob Clark <robdclark@chromium.org> 09 June 2023, 01:10:51 UTC
a8e981a drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable The internal_hpd flag is set to true by dp_bridge_hpd_enable() and set to false by dp_bridge_hpd_disable() to handle GPIO pinmuxed into DP controller case. HDP related interrupts can not be enabled until internal_hpd is set to true. At current implementation dp_display_config_hpd() will initialize DP host controller first followed by enabling HDP related interrupts if internal_hpd was true at that time. Enable HDP related interrupts depends on internal_hpd status may leave system with DP driver host is in running state but without HDP related interrupts being enabled. This will prevent external display from being detected. Eliminated this dependency by moving HDP related interrupts enable/disable be done at dp_bridge_hpd_enable/disable() directly regardless of internal_hpd status. Changes in V3: -- dp_catalog_ctrl_hpd_enable() and dp_catalog_ctrl_hpd_disable() -- rewording ocmmit text Changes in V4: -- replace dp_display_config_hpd() with dp_display_host_start() -- move enable_irq() at dp_display_host_start(); Changes in V5: -- replace dp_display_host_start() with dp_display_host_init() Changes in V6: -- squash remove enable_irq() and disable_irq() Fixes: cd198caddea7 ("drm/msm/dp: Rely on hpd_enable/disable callbacks") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Tested-by: Leonard Lausen <leonard@lausen.nl> # on sc7180 lazor Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Tested-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/1684878756-17830-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Rob Clark <robdclark@chromium.org> 09 June 2023, 01:10:44 UTC
bcd8430 Merge tag 'drm-misc-fixes-2023-06-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v6.4-rc6: - resume and modeset fixes for ast. - Fill in fb-helper vars more correctly. - Assorted ivpu fixes. - lima context destroy fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ea6b88ec-b653-3781-0b68-cd0275c27923@linux.intel.com 09 June 2023, 01:10:10 UTC
02b8f0b Merge tag 'exynos-drm-fixes-for-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Two fixups - Fix wrong return in Exynos vidi driver. - Fix use-after-free issue to Exynos g2d driver. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230607043148.43303-1-inki.dae@samsung.com 09 June 2023, 01:09:47 UTC
d6d4f0a Merge tag 'drm-intel-fixes-2023-06-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes CDCLK voltage fix for ADL-P and eDP wake sync pulse fix. Two error handling fixes to selftests (to appease static checkers) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZIGUHBz7+LsqN2nm@jlahtine-mobl.ger.corp.intel.com 09 June 2023, 00:57:27 UTC
b1913ff Merge tag 'amd-drm-fixes-6.4-2023-06-07' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.4-2023-06-07: amdgpu: - S0ix fixes - GPU reset fixes - SMU13 fixes - SMU11 fixes - Misc Display fixes - Revert RV/RV2/PCO clock counter changes - Fix Stoney xclk value - Fix reserved vram debug info radeon: - Fix a potential use after free Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230607213740.7723-1-alexander.deucher@amd.com 08 June 2023, 23:19:57 UTC
8d15d5e Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Two tiny arm64 fixes for -rc6. One fixes a build breakage when MAX_ORDER can be nonsensical if CONFIG_EXPERT=y and the other fixes the address masking for perf's page fault software events so that it is consistent amongst them: - Fix build breakage due to bogus MAX_ORDER definitions on !4k pages - Avoid masking fault address for perf software events" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: pass original fault address to handle_mm_fault() in PER_VMA_LOCK block arm64: Remove the ARCH_FORCE_MAX_ORDER config input prompt 08 June 2023, 20:54:26 UTC
4b13cbe vhost: Fix worker hangs due to missed wake up calls We can race where we have added work to the work_list, but vhost_task_fn has passed that check but not yet set us into TASK_INTERRUPTIBLE. wake_up_process will see us in TASK_RUNNING and just return. This bug was intoduced in commit f9010dbdce91 ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression") when I moved the setting of TASK_INTERRUPTIBLE to simplfy the code and avoid get_signal from logging warnings about being in the wrong state. This moves the setting of TASK_INTERRUPTIBLE back to before we test if we need to stop the task to avoid a possible race there as well. We then have vhost_worker set TASK_RUNNING if it finds work similar to before. Fixes: f9010dbdce91 ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression") Signed-off-by: Mike Christie <michael.christie@oracle.com> Message-Id: <20230607192338.6041-3-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 08 June 2023, 19:43:09 UTC
a284f09 vhost: Fix crash during early vhost_transport_send_pkt calls If userspace does VHOST_VSOCK_SET_GUEST_CID before VHOST_SET_OWNER we can race where: 1. thread0 calls vhost_transport_send_pkt -> vhost_work_queue 2. thread1 does VHOST_SET_OWNER which calls vhost_worker_create. 3. vhost_worker_create will set the dev->worker pointer before setting the worker->vtsk pointer. 4. thread0's vhost_work_queue will see the dev->worker pointer is set and try to call vhost_task_wake using not yet set worker->vtsk pointer. 5. We then crash since vtsk is NULL. Before commit 6e890c5d5021 ("vhost: use vhost_tasks for worker threads"), we only had the worker pointer so we could just check it to see if VHOST_SET_OWNER has been done. After that commit we have the vhost_worker and vhost_task pointer, so we can now hit the bug above. This patch embeds the vhost_worker in the vhost_dev and moves the work list initialization back to vhost_dev_init, so we can just check the worker.vtsk pointer to check if VHOST_SET_OWNER has been done like before. Fixes: 6e890c5d5021 ("vhost: use vhost_tasks for worker threads") Signed-off-by: Mike Christie <michael.christie@oracle.com> Message-Id: <20230607192338.6041-2-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: syzbot+d0d442c22fa8db45ff0e@syzkaller.appspotmail.com Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> 08 June 2023, 19:43:09 UTC
1f5d2e3 vhost_net: revert upend_idx only on retriable error Fix possible virtqueue used buffers leak and corresponding stuck in case of temporary -EIO from sendmsg() which is produced by tun driver while backend device is not up. In case of no-retriable error and zcopy do not revert upend_idx to pass packet data (that is update used_idx in corresponding vhost_zerocopy_signal_used()) as if packet data has been transferred successfully. v2: set vq->heads[ubuf->desc].len equal to VHOST_DMA_DONE_LEN in case of fake successful transmit. Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru> Message-Id: <20230424204411.24888-1-asmetanin@yandex-team.ru> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru> Acked-by: Jason Wang <jasowang@redhat.com> 08 June 2023, 19:43:08 UTC
376daf3 vhost_vdpa: tell vqs about the negotiated As is done in the net, iscsi, and vsock vhost support, let the vdpa vqs know about the features that have been negotiated. This allows vhost to more safely make decisions based on the features, such as when using PACKED vs split queues. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230424225031.18947-2-shannon.nelson@amd.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 08 June 2023, 19:43:08 UTC
73790bd vdpa/mlx5: Fix hang when cvq commands are triggered during device unregister Currently the vdpa device is unregistered after the workqueue that processes vq commands is disabled. However, the device unregister process can still send commands to the cvq (a vlan delete for example) which leads to a hang because the handing workqueue has been disabled and the command never finishes: [ 2263.095764] rcu: INFO: rcu_sched self-detected stall on CPU [ 2263.096307] rcu: 9-....: (5250 ticks this GP) idle=dac4/1/0x4000000000000000 softirq=111009/111009 fqs=2544 [ 2263.097154] rcu: (t=5251 jiffies g=393549 q=347 ncpus=10) [ 2263.097648] CPU: 9 PID: 94300 Comm: kworker/u20:2 Not tainted 6.3.0-rc6_for_upstream_min_debug_2023_04_14_00_02 #1 [ 2263.098535] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2263.099481] Workqueue: mlx5_events mlx5_vhca_state_work_handler [mlx5_core] [ 2263.100143] RIP: 0010:virtnet_send_command+0x109/0x170 [ 2263.100621] Code: 1d df f5 ff 85 c0 78 5c 48 8b 7b 08 e8 d0 c5 f5 ff 84 c0 75 11 eb 22 48 8b 7b 08 e8 01 b7 f5 ff 84 c0 75 15 f3 90 48 8b 7b 08 <48> 8d 74 24 04 e8 8d c5 f5 ff 48 85 c0 74 de 48 8b 83 f8 00 00 00 [ 2263.102148] RSP: 0018:ffff888139cf36e8 EFLAGS: 00000246 [ 2263.102624] RAX: 0000000000000000 RBX: ffff888166bea940 RCX: 0000000000000001 [ 2263.103244] RDX: 0000000000000000 RSI: ffff888139cf36ec RDI: ffff888146763800 [ 2263.103864] RBP: ffff888139cf3710 R08: ffff88810d201000 R09: 0000000000000000 [ 2263.104473] R10: 0000000000000002 R11: 0000000000000003 R12: 0000000000000002 [ 2263.105082] R13: 0000000000000002 R14: ffff888114528400 R15: ffff888166bea000 [ 2263.105689] FS: 0000000000000000(0000) GS:ffff88852cc80000(0000) knlGS:0000000000000000 [ 2263.106404] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2263.106925] CR2: 00007f31f394b000 CR3: 000000010615b006 CR4: 0000000000370ea0 [ 2263.107542] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2263.108163] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2263.108769] Call Trace: [ 2263.109059] <TASK> [ 2263.109320] ? check_preempt_wakeup+0x11f/0x230 [ 2263.109750] virtnet_vlan_rx_kill_vid+0x5a/0xa0 [ 2263.110180] vlan_vid_del+0x9c/0x170 [ 2263.110546] vlan_device_event+0x351/0x760 [8021q] [ 2263.111004] raw_notifier_call_chain+0x41/0x60 [ 2263.111426] dev_close_many+0xcb/0x120 [ 2263.111808] unregister_netdevice_many_notify+0x130/0x770 [ 2263.112297] ? wq_worker_running+0xa/0x30 [ 2263.112688] unregister_netdevice_queue+0x89/0xc0 [ 2263.113128] unregister_netdev+0x18/0x20 [ 2263.113512] virtnet_remove+0x4f/0x230 [ 2263.113885] virtio_dev_remove+0x31/0x70 [ 2263.114273] device_release_driver_internal+0x18f/0x1f0 [ 2263.114746] bus_remove_device+0xc6/0x130 [ 2263.115146] device_del+0x173/0x3c0 [ 2263.115502] ? kernfs_find_ns+0x35/0xd0 [ 2263.115895] device_unregister+0x1a/0x60 [ 2263.116279] unregister_virtio_device+0x11/0x20 [ 2263.116706] device_release_driver_internal+0x18f/0x1f0 [ 2263.117182] bus_remove_device+0xc6/0x130 [ 2263.117576] device_del+0x173/0x3c0 [ 2263.117929] ? vdpa_dev_remove+0x20/0x20 [vdpa] [ 2263.118364] device_unregister+0x1a/0x60 [ 2263.118752] mlx5_vdpa_dev_del+0x4c/0x80 [mlx5_vdpa] [ 2263.119232] vdpa_match_remove+0x21/0x30 [vdpa] [ 2263.119663] bus_for_each_dev+0x71/0xc0 [ 2263.120054] vdpa_mgmtdev_unregister+0x57/0x70 [vdpa] [ 2263.120520] mlx5v_remove+0x12/0x20 [mlx5_vdpa] [ 2263.120953] auxiliary_bus_remove+0x18/0x30 [ 2263.121356] device_release_driver_internal+0x18f/0x1f0 [ 2263.121830] bus_remove_device+0xc6/0x130 [ 2263.122223] device_del+0x173/0x3c0 [ 2263.122581] ? devl_param_driverinit_value_get+0x29/0x90 [ 2263.123070] mlx5_rescan_drivers_locked+0xc4/0x2d0 [mlx5_core] [ 2263.123633] mlx5_unregister_device+0x54/0x80 [mlx5_core] [ 2263.124169] mlx5_uninit_one+0x54/0x150 [mlx5_core] [ 2263.124656] mlx5_sf_dev_remove+0x45/0x90 [mlx5_core] [ 2263.125153] auxiliary_bus_remove+0x18/0x30 [ 2263.125560] device_release_driver_internal+0x18f/0x1f0 [ 2263.126052] bus_remove_device+0xc6/0x130 [ 2263.126451] device_del+0x173/0x3c0 [ 2263.126815] mlx5_sf_dev_remove+0x39/0xf0 [mlx5_core] [ 2263.127318] mlx5_sf_dev_state_change_handler+0x178/0x270 [mlx5_core] [ 2263.127920] blocking_notifier_call_chain+0x5a/0x80 [ 2263.128379] mlx5_vhca_state_work_handler+0x151/0x200 [mlx5_core] [ 2263.128951] process_one_work+0x1bb/0x3c0 [ 2263.129355] ? process_one_work+0x3c0/0x3c0 [ 2263.129766] worker_thread+0x4d/0x3c0 [ 2263.130140] ? process_one_work+0x3c0/0x3c0 [ 2263.130548] kthread+0xb9/0xe0 [ 2263.130895] ? kthread_complete_and_exit+0x20/0x20 [ 2263.131349] ret_from_fork+0x1f/0x30 [ 2263.131717] </TASK> The fix is to disable and destroy the workqueue after the device unregister. It is expected that vhost will not trigger kicks after the unregister. But even if it would, the wq is disabled already by setting the pointer to NULL (done so in the referenced commit). Fixes: ad6dc1daaf29 ("vdpa/mlx5: Avoid processing works if workqueue was destroyed") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Message-Id: <20230516095800.3549932-1-dtatulea@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> 08 June 2023, 19:43:08 UTC
c66dbc3 tools/virtio: Add .gitignore for ringtest Ignore executables for ringtest. Signed-off-by: Rong Tao <rongtao@cestc.cn> Message-Id: <tencent_C121802C93CB4095C6D7D95113442E830A07@qq.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 08 June 2023, 19:43:08 UTC
57380fd tools/virtio: Fix arm64 ringtest compilation error Add cpu_relax() for arm64 instead of directly assert(), and add assert.h header file. Also, add smp_wmb and smp_mb for arm64. Compilation error as follows, avoid __always_inline undefined. $ make cc -Wall -pthread -O2 -ggdb -flto -fwhole-program -c -o ring.o ring.c In file included from ring.c:10: main.h: In function ‘busy_wait’: main.h:99:21: warning: implicit declaration of function ‘assert’ [-Wimplicit-function-declaration] 99 | #define cpu_relax() assert(0) | ^~~~~~ main.h:107:17: note: in expansion of macro ‘cpu_relax’ 107 | cpu_relax(); | ^~~~~~~~~ main.h:12:1: note: ‘assert’ is defined in header ‘<assert.h>’; did you forget to ‘#include <assert.h>’? 11 | #include <stdbool.h> +++ |+#include <assert.h> 12 | main.h: At top level: main.h:143:23: error: expected ‘;’ before ‘void’ 143 | static __always_inline | ^ | ; 144 | void __read_once_size(const volatile void *p, void *res, int size) | ~~~~ main.h:158:23: error: expected ‘;’ before ‘void’ 158 | static __always_inline void __write_once_size(volatile void *p, void *res, int size) | ^~~~~ | ; make: *** [<builtin>: ring.o] Error 1 Signed-off-by: Rong Tao <rongtao@cestc.cn> Message-Id: <tencent_F53E159DD7925174445D830DA19FACF44B07@qq.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 08 June 2023, 19:43:08 UTC
a90e860 vduse: avoid empty string for dev name Syzkaller hits a kernel WARN when the first character of the dev name provided is NULL. Solution is to add a NULL check before calling cdev_device_add() in vduse_create_dev(). kobject: (0000000072042169): attempted to be registered with empty name! WARNING: CPU: 0 PID: 112695 at lib/kobject.c:236 Call Trace: kobject_add_varg linux/src/lib/kobject.c:390 [inline] kobject_add+0xf6/0x150 linux/src/lib/kobject.c:442 device_add+0x28f/0xc20 linux/src/drivers/base/core.c:2167 cdev_device_add+0x83/0xc0 linux/src/fs/char_dev.c:546 vduse_create_dev linux/src/drivers/vdpa/vdpa_user/vduse_dev.c:2254 [inline] vduse_ioctl+0x7b5/0xf30 linux/src/drivers/vdpa/vdpa_user/vduse_dev.c:2316 vfs_ioctl linux/src/fs/ioctl.c:47 [inline] file_ioctl linux/src/fs/ioctl.c:510 [inline] do_vfs_ioctl+0x14b/0xa80 linux/src/fs/ioctl.c:697 ksys_ioctl+0x7c/0xa0 linux/src/fs/ioctl.c:714 __do_sys_ioctl linux/src/fs/ioctl.c:721 [inline] __se_sys_ioctl linux/src/fs/ioctl.c:719 [inline] __x64_sys_ioctl+0x42/0x50 linux/src/fs/ioctl.c:719 do_syscall_64+0x94/0x330 linux/src/arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace") Cc: "Xie Yongji" <xieyongji@bytedance.com> Reported-by: Xianjun Zeng <zengxianjun@bytedance.com> Signed-off-by: Sheng Zhao <sheng.zhao@bytedance.com> Message-Id: <20230530033626.1266794-1-sheng.zhao@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xie Yongji <xieyongji@bytedance.com> Cc: "Michael S. Tsirkin"<mst@redhat.com>, "Jason Wang"<jasowang@redhat.com>, Reviewed-by: Xie Yongji <xieyongji@bytedance.com> 08 June 2023, 19:43:08 UTC
8d38800 MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver Add the MAINTAINERS entries for the Renesas RZ/V2M I2C driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> 08 June 2023, 18:49:59 UTC
99a670b riscv: fix kprobe __user string arg print fault issue On riscv qemu platform, when add kprobe event on do_sys_open() to show filename string arg, it just print fault as follow: echo 'p:myprobe do_sys_open dfd=$arg1 filename=+0($arg2):string flags=$arg3 mode=$arg4' > kprobe_events bash-166 [000] ...1. 360.195367: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6 bash-166 [000] ...1. 360.219369: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6 bash-191 [000] ...1. 360.378827: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename=(fault) flags=0x98800 mode=0x0 As riscv do not select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE, the +0($arg2) addr is processed as a kernel address though it is a userspace address, cause the above filename=(fault) print. So select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE to avoid the issue, after that the kprobe trace is ok as below: bash-166 [000] ...1. 96.767641: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6 bash-166 [000] ...1. 96.793751: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6 bash-177 [000] ...1. 96.962354: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename="/sys/kernel/debug/tracing/events/kprobes/" flags=0x98800 mode=0x0 Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Acked-by: Björn Töpel <bjorn@rivosinc.com> Fixes: 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work") Link: https://lore.kernel.org/r/20230504072910.3742842-1-ruanjinjie@huawei.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 08 June 2023, 17:23:19 UTC
25041a4 Merge tag 'net-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can, wifi, netfilter, bluetooth and ebpf. Current release - regressions: - bpf: sockmap: avoid potential NULL dereference in sk_psock_verdict_data_ready() - wifi: iwlwifi: fix -Warray-bounds bug in iwl_mvm_wait_d3_notif() - phylink: actually fix ksettings_set() ethtool call - eth: dwmac-qcom-ethqos: fix a regression on EMAC < 3 Current release - new code bugs: - wifi: mt76: fix possible NULL pointer dereference in mt7996_mac_write_txwi() Previous releases - regressions: - netfilter: fix NULL pointer dereference in nf_confirm_cthelper - wifi: rtw88/rtw89: correct PS calculation for SUPPORTS_DYNAMIC_PS - openvswitch: fix upcall counter access before allocation - bluetooth: - fix use-after-free in hci_remove_ltk/hci_remove_irk - fix l2cap_disconnect_req deadlock - nic: bnxt_en: prevent kernel panic when receiving unexpected PHC_UPDATE event Previous releases - always broken: - core: annotate rfs lockless accesses - sched: fq_pie: ensure reasonable TCA_FQ_PIE_QUANTUM values - netfilter: add null check for nla_nest_start_noflag() in nft_dump_basechain_hook() - bpf: fix UAF in task local storage - ipv4: ping_group_range: allow GID from 2147483648 to 4294967294 - ipv6: rpl: fix route of death. - tcp: gso: really support BIG TCP - mptcp: fixes for user-space PM address advertisement - smc: avoid to access invalid RMBs' MRs in SMCRv1 ADD LINK CONT - can: avoid possible use-after-free when j1939_can_rx_register fails - batman-adv: fix UaF while rescheduling delayed work - eth: qede: fix scheduling while atomic - eth: ice: make writes to /dev/gnssX synchronous" * tag 'net-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE event bnxt_en: Skip firmware fatal error recovery if chip is not accessible bnxt_en: Query default VLAN before VNIC setup on a VF bnxt_en: Don't issue AP reset during ethtool's reset operation bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg() net: bcmgenet: Fix EEE implementation eth: ixgbe: fix the wake condition eth: bnxt: fix the wake condition lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release() bpf: Add extra path pointer check to d_path helper net: sched: fix possible refcount leak in tc_chain_tmplt_add() net: sched: act_police: fix sparse errors in tcf_police_dump() net: openvswitch: fix upcall counter access before allocation net: sched: move rtm_tca_policy declaration to include file ice: make writes to /dev/gnssX synchronous net: sched: add rcu annotations around qdisc->qdisc_sleeping rfs: annotate lockless accesses to RFS sock flow table rfs: annotate lockless accesses to sk->sk_rxhash virtio_net: use control_buf for coalesce params ... 08 June 2023, 16:27:19 UTC
79b6fad Merge tag 'xfs-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs fixes from Dave Chinner: "These are a set of regression fixes discovered on recent kernels. I was hoping to send this to you a week and half ago, but events out of my control delayed finalising the changes until early this week. Whilst the diffstat looks large for this stage of the merge window, a large chunk of it comes from moving the guts of one function from one file to another i.e. it's the same code, it is just run in a different context where it is safe to hold a specific lock. Otherwise the individual changes are relatively small and straigtht forward. Summary: - Propagate unlinked inode list corruption back up to log recovery (regression fix) - improve corruption detection for AGFL entries, AGFL indexes and XEFI extents (syzkaller fuzzer oops report) - Avoid double perag reference release (regression fix) - Improve extent merging detection in scrub (regression fix) - Fix a new undefined high bit shift (regression fix) - Fix for AGF vs inode cluster buffer deadlock (regression fix)" * tag 'xfs-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: collect errors from inodegc for unlinked inode recovery xfs: validate block number being freed before adding to xefi xfs: validity check agbnos on the AGFL xfs: fix agf/agfl verification on v4 filesystems xfs: fix double xfs_perag_rele() in xfs_filestream_pick_ag() xfs: fix broken logic when detecting mergeable bmap records xfs: Fix undefined behavior of shift into sign bit xfs: fix AGF vs inode cluster buffer deadlock xfs: defered work could create precommits xfs: restore allocation trylock iteration xfs: buffer pins need to hold a buffer reference 08 June 2023, 15:46:58 UTC
dea9d8f ext4: only check dquot_initialize_needed() when debugging ext4_xattr_block_set() relies on its caller to call dquot_initialize() on the inode. To assure that this has happened there are WARN_ON checks. Unfortunately, this is subject to false positives if there is an antagonist thread which is flipping the file system at high rates between r/o and rw. So only do the check if EXT4_XATTR_DEBUG is enabled. Link: https://lore.kernel.org/r/20230608044056.GA1418535@mit.edu Signed-off-by: Theodore Ts'o <tytso@mit.edu> 08 June 2023, 14:06:40 UTC
1b29243 Revert "ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled" This reverts commit a44be64bbecb15a452496f60db6eacfee2b59c79. Link: https://lore.kernel.org/r/653b3359-2005-21b1-039d-c55ca4cffdcc@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 08 June 2023, 13:57:04 UTC
58d9588 soundwire: stream: Add missing clear of alloc_slave_rt The current path that skips allocating the slave runtime does not clear the alloc_slave_rt flag, this is clearly incorrect. Add the missing clear, so the runtime won't be erroneously cleaned up. Fixes: f3016b891c8c ("soundwire: stream: sdw_stream_add_ functions can be called multiple times") Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230602101140.2040141-1-ckeepax@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 08 June 2023, 11:38:04 UTC
6c0ec7a Merge branch 'bnxt_en-bug-fixes' Michael Chan says: ==================== bnxt_en: Bug fixes This patchset has the following fixes for bnxt_en: 1. Add missing VNIC ID parameter in the FW message when getting an updated RSS configuration from the FW. 2. Fix a warning when doing ethtool reset on newer chips. 3. Fix VLAN issue on a VF when a default VLAN is assigned. 4. Fix a problem during DPC (Downstream Port containment) scenario. 5. Fix a NULL pointer dereference when receiving a PTP event from FW. 6. Fix VXLAN/Geneve UDP port delete/add with newer FW. ==================== Link: https://lore.kernel.org/r/20230607075409.228450-1-michael.chan@broadcom.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 08 June 2023, 08:52:48 UTC
1eb4ef1 bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks As per the new udp tunnel framework, drivers which need to know the details of a port entry (i.e. port type) when it gets deleted should use the .set_port / .unset_port callbacks. Implementing the current .udp_tunnel_sync callback would mean that the deleted tunnel port entry would be all zeros. This used to work on older firmware because it would not check the input when deleting a tunnel port. With newer firmware, the delete will now fail and subsequent tunnel port allocation will fail as a result. Fixes: 442a35a5a7aa ("bnxt: convert to new udp_tunnel_nic infra") Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 08 June 2023, 08:52:45 UTC
319a782 bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE event The firmware can send PHC_RTC_UPDATE async event on a PF that may not have PTP registered. In such a case, there will be a null pointer deference for bp->ptp_cfg when we try to handle the event. Fix it by not registering for this event with the firmware if !bp->ptp_cfg. Also, check that bp->ptp_cfg is valid before proceeding when we receive the event. Fixes: 8bcf6f04d4a5 ("bnxt_en: Handle async event when the PHC is updated in RTC mode") Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 08 June 2023, 08:52:45 UTC
83474a9 bnxt_en: Skip firmware fatal error recovery if chip is not accessible Driver starts firmware fatal error recovery by detecting heartbeat failure or fw reset count register changing. But these checks are not reliable if the device is not accessible. This can happen while DPC (Downstream Port containment) is in progress. Skip firmware fatal recovery if pci_device_is_present() returns false. Fixes: acfb50e4e773 ("bnxt_en: Add FW fatal devlink_health_reporter.") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 08 June 2023, 08:52:45 UTC
1a9e4f5 bnxt_en: Query default VLAN before VNIC setup on a VF We need to call bnxt_hwrm_func_qcfg() on a VF to query the default VLAN that may be setup by the PF. If a default VLAN is enabled, the VF cannot support VLAN acceleration on the receive side and the VNIC must be setup to strip out the default VLAN tag. If a default VLAN is not enabled, the VF can support VLAN acceleration on the receive side. The VNIC should be set up to strip or not strip the VLAN based on the RX VLAN acceleration setting. Without this call to determine the default VLAN before calling bnxt_setup_vnic(), the VNIC may not be set up correctly. For example, bnxt_setup_vnic() may set up to strip the VLAN tag based on stale default VLAN information. If RX VLAN acceleration is not enabled, the VLAN tag will be incorrectly stripped and the RX data path will not work correctly. Fixes: cf6645f8ebc6 ("bnxt_en: Add function for VF driver to query default VLAN.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 08 June 2023, 08:52:45 UTC
1d99780 bnxt_en: Don't issue AP reset during ethtool's reset operation Only older NIC controller's firmware uses the PROC AP reset type. Firmware on 5731X/5741X and newer chips does not support this reset type. When bnxt_reset() issues a series of resets, this PROC AP reset may actually fail on these newer chips because the firmware is not ready to accept this unsupported command yet. Avoid this unnecessary error by skipping this reset type on chips that don't support it. Fixes: 7a13240e3718 ("bnxt_en: fix ethtool_reset_flags ABI violations") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 08 June 2023, 08:52:45 UTC
095d5dc bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg() We must specify the vnic id of the vnic in the input structure of this firmware message. Otherwise we will get an error from the firmware. Fixes: 98a4322b70e8 ("bnxt_en: update RSS config using difference algorithm") Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 08 June 2023, 08:52:45 UTC
7f3c782 eeprom: at24: also select REGMAP Selecting only REGMAP_I2C can leave REGMAP unset, causing build errors, so also select REGMAP to prevent the build errors. ../drivers/misc/eeprom/at24.c:540:42: warning: 'struct regmap_config' declared inside parameter list will not be visible outside of this definition or declaration 540 | struct regmap_config *regmap_config) ../drivers/misc/eeprom/at24.c: In function 'at24_make_dummy_client': ../drivers/misc/eeprom/at24.c:552:18: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration] 552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config); ../drivers/misc/eeprom/at24.c:552:16: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config); ../drivers/misc/eeprom/at24.c: In function 'at24_probe': ../drivers/misc/eeprom/at24.c:586:16: error: variable 'regmap_config' has initializer but incomplete type 586 | struct regmap_config regmap_config = { }; ../drivers/misc/eeprom/at24.c:586:30: error: storage size of 'regmap_config' isn't known 586 | struct regmap_config regmap_config = { }; ../drivers/misc/eeprom/at24.c:586:30: warning: unused variable 'regmap_config' [-Wunused-variable] Fixes: 5c015258478e ("eeprom: at24: add basic regmap_i2c support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> 08 June 2023, 07:58:57 UTC
409e873 ceph: fix use-after-free bug for inodes when flushing capsnaps There is a race between capsnaps flush and removing the inode from 'mdsc->snap_flush_list' list: == Thread A == == Thread B == ceph_queue_cap_snap() -> allocate 'capsnapA' ->ihold('&ci->vfs_inode') ->add 'capsnapA' to 'ci->i_cap_snaps' ->add 'ci' to 'mdsc->snap_flush_list' ... == Thread C == ceph_flush_snaps() ->__ceph_flush_snaps() ->__send_flush_snap() handle_cap_flushsnap_ack() ->iput('&ci->vfs_inode') this also will release 'ci' ... == Thread D == ceph_handle_snap() ->flush_snaps() ->iterate 'mdsc->snap_flush_list' ->get the stale 'ci' ->remove 'ci' from ->ihold(&ci->vfs_inode) this 'mdsc->snap_flush_list' will WARNING To fix this we will increase the inode's i_count ref when adding 'ci' to the 'mdsc->snap_flush_list' list. [ idryomov: need_put int -> bool ] Cc: stable@vger.kernel.org Link: https://bugzilla.redhat.com/show_bug.cgi?id=2209299 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> 08 June 2023, 06:56:25 UTC
a3efabe accel/ivpu: Fix sporadic VPU boot failure Wait for AON bit in HOST_SS_CPR_RST_CLR to return 0 before starting VPUIP power up sequence, otherwise the VPU device may sporadically fail to boot. An error in power up sequence is propagated to the runtime power management - the device will be in an error state until the VPU driver is reloaded. Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU") Cc: stable@vger.kernel.org # 6.3.x Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230607094502.388489-1-stanislaw.gruszka@linux.intel.com 08 June 2023, 06:17:27 UTC
b563e47 accel/ivpu: Do not use mutex_lock_interruptible If we get signal when waiting for the mmu->lock we do not invalidate current MMU configuration that might result in undefined behavior. Additionally there is little or no benefit on break waiting for ipc->lock. In current code base, we keep this lock for short periods. Fixes: 263b2ba5fc93 ("accel/ivpu: Add Intel VPU MMU support") Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230525103818.877590-2-stanislaw.gruszka@linux.intel.com 08 June 2023, 06:15:46 UTC
9f7e361 accel/ivpu: Do not trigger extra VPU reset if the VPU is idle Turning off the PLL and entering D0i3 will reset the VPU so an explicit IP reset is redundant. But if the VPU is active, it may interfere with PLL disabling and to avoid that, we have to issue an additional IP reset to silence the VPU before turning off the PLL. Fixes: a8fed6d1e0b9 ("accel/ivpu: Fix power down sequence") Cc: stable@vger.kernel.org # 6.3.x Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230525103818.877590-1-stanislaw.gruszka@linux.intel.com 08 June 2023, 06:15:30 UTC
182620a Merge tag 'batadv-net-pullrequest-20230607' of git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== Here is a batman-adv bugfix: - fix a broken sync while rescheduling delayed work, by Vladislav Efanov * tag 'batadv-net-pullrequest-20230607' of git://git.open-mesh.org/linux-merge: batman-adv: Broken sync while rescheduling delayed work ==================== Link: https://lore.kernel.org/r/20230607155515.548120-1-sw@simonwunderlich.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 June 2023, 04:56:01 UTC
a9f3104 net: bcmgenet: Fix EEE implementation We had a number of short comings: - EEE must be re-evaluated whenever the state machine detects a link change as wight be switching from a link partner with EEE enabled/disabled - tx_lpi_enabled controls whether EEE should be enabled/disabled for the transmit path, which applies to the TBUF block - We do not need to forcibly enable EEE upon system resume, as the PHY state machine will trigger a link event that will do that, too Fixes: 6ef398ea60d9 ("net: bcmgenet: add EEE support") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20230606214348.2408018-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 June 2023, 04:53:14 UTC
f0d7519 eth: ixgbe: fix the wake condition Flip the netif_carrier_ok() condition in queue wake logic. When I moved it to inside __netif_txq_completed_wake() I missed negating it. This made the condition ineffective and could probably lead to crashes. Fixes: 301f227fc860 ("net: piggy back on the memory barrier in bql when waking queues") Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230607010826.960226-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 June 2023, 04:53:11 UTC
649c3fe eth: bnxt: fix the wake condition The down condition should be the negation of the wake condition, IOW when I moved it from: if (cond && wake()) to if (__netif_txq_completed_wake(cond)) Cond should have been negated. Flip it now. This bug leads to occasional crashes with netconsole. It may also lead to queue never waking up in case BQL is not enabled. Reported-by: David Wei <davidhwei@meta.com> Fixes: 08a096780d92 ("bnxt: use new queue try_stop/try_wake macros") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20230607010826.960226-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 June 2023, 04:53:11 UTC
c9d99cf Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-06-07 We've added 7 non-merge commits during the last 7 day(s) which contain a total of 12 files changed, 112 insertions(+), 7 deletions(-). The main changes are: 1) Fix a use-after-free in BPF's task local storage, from KP Singh. 2) Make struct path handling more robust in bpf_d_path, from Jiri Olsa. 3) Fix a syzbot NULL-pointer dereference in sockmap, from Eric Dumazet. 4) UAPI fix for BPF_NETFILTER before final kernel ships, from Florian Westphal. 5) Fix map-in-map array_map_gen_lookup code generation where elem_size was not being set for inner maps, from Rhys Rustad-Elliott. 6) Fix sockopt_sk selftest's NETLINK_LIST_MEMBERSHIPS assertion, from Yonghong Song. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Add extra path pointer check to d_path helper selftests/bpf: Fix sockopt_sk selftest bpf: netfilter: Add BPF_NETFILTER bpf_attach_type selftests/bpf: Add access_inner_map selftest bpf: Fix elem_size not being set for inner maps bpf: Fix UAF in task local storage bpf, sockmap: Avoid potential NULL dereference in sk_psock_verdict_data_ready() ==================== Link: https://lore.kernel.org/r/20230607220514.29698-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 June 2023, 04:47:11 UTC
7c5d480 lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release() irq_cpu_rmap_release() calls cpu_rmap_put(), which may free the rmap. So we need to clear the pointer to our glue structure in rmap before doing that, not after. Fixes: 4e0473f1060a ("lib: cpu_rmap: Avoid use after free on rmap->obj array entries") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/ZHo0vwquhOy3FaXc@decadent.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> 08 June 2023, 04:25:00 UTC
e1a6002 drm/amd/display: Reduce sdp bw after urgent to 90% [Description] Reduce expected SDP bandwidth due to poor QoS and arbitration issues on high bandwidth configs Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 June 2023, 21:02:25 UTC
dac6522 drm/amdgpu: change reserved vram info print The link object of mgr->reserved_pages is the blocks variable in struct amdgpu_vram_reservation, not the link variable in struct drm_buddy_block. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 07 June 2023, 21:01:17 UTC
b447b07 drm/amdgpu: fix xclk freq on CHIP_STONEY According to Alex, most APUs from that time seem to have the same issue (vbios says 48Mhz, actual is 100Mhz). I only have a CHIP_STONEY so I limit the fixup to CHIP_STONEY Signed-off-by: Chia-I Wu <olvaffe@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 07 June 2023, 21:00:35 UTC
982b173 drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl Userspace can race to free the gobj(robj converted from), robj should not be accessed again after drm_gem_object_put, otherwith it will result in use-after-free. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Min Li <lm0963hack@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 June 2023, 21:00:20 UTC
73c12de Revert "drm/amdgpu: switch to golden tsc registers for raven/raven2" This reverts commit f03eb1d26c2739b75580f58bbab4ab2d5d3eba46. This results in inconsistent timing reported via asynchronous GPU queries. Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html Cc: Jesse.Zhang@amd.com Cc: michel@daenzer.net Reviewed-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 June 2023, 20:59:56 UTC
d511f95 Revert "drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to revision id" This reverts commit 9d2d1827af295fd6971786672c41c4dba3657154. This results in inconsistent timing reported via asynchronous GPU queries. Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html Cc: Jesse.Zhang@amd.com Cc: michel@daenzer.net Reviewed-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 June 2023, 20:59:48 UTC
3b3ffd7 Revert "drm/amdgpu: change the reference clock for raven/raven2" This reverts commit fbc24293ca16b3b9ef891fe32ccd04735a6f8dc1. This results in inconsistent timing reported via asynchronous GPU queries. Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html Cc: Jesse.Zhang@amd.com Cc: michel@daenzer.net Reviewed-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 June 2023, 20:59:41 UTC
59de751 drm/amd/display: add ODM case when looking for first split pipe [Why] When going from ODM 2:1 single display case to max displays, second odm pipe needs to be repurposed for one of the new single displays. However, acquire_first_split_pipe() only handles MPC case and not ODM case [How] Add ODM conditions in acquire_first_split_pipe() Add commit_minimal_transition_state() in commit_streams() to handle odm 2:1 exit first, and then process new streams Handle ODM condition in commit_minimal_transition_state() Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 June 2023, 20:55:39 UTC
99b3886 drm/amd: Make lack of `ACPI_FADT_LOW_POWER_S0` or `CONFIG_AMD_PMC` louder during suspend path Users have reported that s2idle wasn't working on OEM Phoenix systems, but it was root caused to be because `CONFIG_AMD_PMC` wasn't set in the distribution kernel config. To make this more apparent, raise the messaging to err instead of warn. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217497 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 June 2023, 20:54:34 UTC
38e4ced drm/amd/pm: conditionally disable pcie lane switching for some sienna_cichlid SKUs Disable the pcie lane switching for some sienna_cichlid SKUs since it might not work well on some platforms. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 07 June 2023, 20:54:00 UTC
1d13c49 drm/amd/pm: Fix power context allocation in SMU13 Use the right data structure for allocation. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 07 June 2023, 20:53:35 UTC
2a1eb1a drm/amdgpu: fix Null pointer dereference error in amdgpu_device_recover_vram Use the function of amdgpu_bo_vm_destroy to handle the resource release of shadow bo. During the amdgpu_mes_self_test, shadow bo released, but vmbo->shadow_list was not, which caused a null pointer reference error in amdgpu_device_recover_vram when GPU reset. Fixes: 6c032c37ac3e ("drm/amdgpu: Fix vram recover doesn't work after whole GPU reset (v2)") Signed-off-by: xinhui pan <xinhui.pan@amd.com> Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com> Acked-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 June 2023, 20:53:03 UTC
30c3d3b drm/amd: Disallow s0ix without BIOS support again commit cf488dcd0ab7 ("drm/amd: Allow s0ix without BIOS support") showed improvements to power consumption over suspend when s0ix wasn't enabled in BIOS and the system didn't support S3. This patch however was misguided because the reason the system didn't support S3 was because SMT was disabled in OEM BIOS setup. This prevented the BIOS from allowing S3. Also allowing GPUs to use the s2idle path actually causes problems if they're invoked on systems that may not support s2idle in the platform firmware. `systemd` has a tendency to try to use `s2idle` if `deep` fails for any reason, which could lead to unexpected flows. The original commit also fixed a problem during resume from suspend to idle without hardware support, but this is no longer necessary with commit ca4751866397 ("drm/amd: Don't allow s0ix on APUs older than Raven") Revert commit cf488dcd0ab7 ("drm/amd: Allow s0ix without BIOS support") to make it match the expected behavior again. Cc: Rafael Ávila de Espíndola <rafael@espindo.la> Link: https://github.com/torvalds/linux/blob/v6.1/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c#L1060 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2599 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 07 June 2023, 20:49:56 UTC
5f63595 Merge tag 'input-for-v6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a fix for unbalanced open count for inhibited input devices - fixups in Elantech PS/2 and Cyppress TTSP v5 drivers - a quirk to soc_button_array driver to make it work with Lenovo Yoga Book X90F / X90L - a removal of erroneous entry from xpad driver * tag 'input-for-v6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - delete a Razer DeathAdder mouse VID/PID entry Input: psmouse - fix OOB access in Elantech protocol Input: soc_button_array - add invalid acpi_index DMI quirk handling Input: fix open count when closing inhibited device Input: cyttsp5 - fix array length 07 June 2023, 20:49:42 UTC
4d8df0f vhost: use kzalloc() instead of kmalloc() followed by memset() Use kzalloc() to allocate new zeroed out msg node instead of memsetting a node allocated with kmalloc(). Signed-off-by: Prathu Baronia <prathubaronia2011@gmail.com> Message-Id: <20230522085019.42914-1-prathubaronia2011@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> 07 June 2023, 20:22:30 UTC
25bda38 MAINTAINERS: Add entry for debug objects This is overdue and an oversight. Add myself to this file deespite the fact that I'm trying to reduce the number of entries in this file which have my name attached, but in the hope that patches wont get picked up elsewhere completely unreviewed and unnoticed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 June 2023, 19:21:30 UTC
a27648c afs: Fix setting of mtime when creating a file/dir/symlink kafs incorrectly passes a zero mtime (ie. 1st Jan 1970) to the server when creating a file, dir or symlink because the mtime recorded in the afs_operation struct gets passed to the server by the marshalling routines, but the afs_mkdir(), afs_create() and afs_symlink() functions don't set it. This gets masked if a file or directory is subsequently modified. Fix this by filling in op->mtime before calling the create op. Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 June 2023, 16:03:12 UTC
49a0a37 riscv: Check the virtual alignment before choosing a map size We used to only check the alignment of the physical address to decide which mapping would fit for a certain region of the linear mapping, but it is not enough since the virtual address must also be aligned, so check that too. Fixes: 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") Reported-by: Song Shuai <songshuaishuai@tinylab.org> Link: https://lore.kernel.org/linux-riscv/tencent_7C3B580B47C1B17C16488EC1@qq.com/ Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230607125851.63370-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 07 June 2023, 14:14:00 UTC
25abe0d riscv: Fix kfence now that the linear mapping can be backed by PUD/P4D/PGD RISC-V Kfence implementation used to rely on the fact the linear mapping was backed by at most PMD hugepages, which is not true anymore since commit 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping"). Instead of splitting PUD/P4D/PGD mappings afterwards, directly map the kfence pool region using PTE mappings by allocating this region before setup_vm_final(). Reported-by: syzbot+a74d57bddabbedd75135@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=a74d57bddabbedd75135 Fixes: 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230606130444.25090-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 07 June 2023, 14:13:53 UTC
6569fc1 riscv: mm: Ensure prot of VM_WRITE and VM_EXEC must be readable Commit 8aeb7b17f04e ("RISC-V: Make mmap() with PROT_WRITE imply PROT_READ") allows riscv to use mmap with PROT_WRITE only, and meanwhile mmap with w+x is also permitted. However, when userspace tries to access this page with PROT_WRITE|PROT_EXEC, which causes infinite loop at load page fault as well as it triggers soft lockup. According to riscv privileged spec, "Writable pages must also be marked readable". The fix to drop the `PAGE_COPY_READ_EXEC` and then `PAGE_COPY_EXEC` would be just used instead. This aligns the other arches (i.e arm64) for protection_map. Fixes: 8aeb7b17f04e ("RISC-V: Make mmap() with PROT_WRITE imply PROT_READ") Signed-off-by: Hsieh-Tseng Shen <woodrow.shen@sifive.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230425102828.1616812-1-woodrow.shen@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 07 June 2023, 14:13:25 UTC
f46fab0 bpf: Add extra path pointer check to d_path helper Anastasios reported crash on stable 5.15 kernel with following BPF attached to lsm hook: SEC("lsm.s/bprm_creds_for_exec") int BPF_PROG(bprm_creds_for_exec, struct linux_binprm *bprm) { struct path *path = &bprm->executable->f_path; char p[128] = { 0 }; bpf_d_path(path, p, 128); return 0; } But bprm->executable can be NULL, so bpf_d_path call will crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI ... RIP: 0010:d_path+0x22/0x280 ... Call Trace: <TASK> bpf_d_path+0x21/0x60 bpf_prog_db9cf176e84498d9_bprm_creds_for_exec+0x94/0x99 bpf_trampoline_6442506293_0+0x55/0x1000 bpf_lsm_bprm_creds_for_exec+0x5/0x10 security_bprm_creds_for_exec+0x29/0x40 bprm_execve+0x1c1/0x900 do_execveat_common.isra.0+0x1af/0x260 __x64_sys_execve+0x32/0x40 It's problem for all stable trees with bpf_d_path helper, which was added in 5.9. This issue is fixed in current bpf code, where we identify and mark trusted pointers, so the above code would fail even to load. For the sake of the stable trees and to workaround potentially broken verifier in the future, adding the code that reads the path object from the passed pointer and verifies it's valid in kernel space. Fixes: 6e22ab9da793 ("bpf: Add d_path helper") Reported-by: Anastasios Papagiannis <tasos.papagiannnis@gmail.com> Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20230606181714.532998-1-jolsa@kernel.org 07 June 2023, 13:03:43 UTC
d1f11f4 MAINTAINERS: add Andy Shevchenko as reviewer for the GPIO subsystem Andy has been a de-facto reviewer for all things GPIO for a long time so let's make it official. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> 07 June 2023, 13:03:29 UTC
d7459ef gpio: sim: quietly ignore configured lines outside the bank The user-space policy of the gpio-sim is that configuration for lines with offsets outside the bounds of the corresponding bank is ignored, but gpio-sim is still using that configuration when constructing the sim. In the case of named lines this results in temporarily allocating space for names that are not used, and for hogs results in errors being logged when the gpio-sim attempts to register the out of range hog with gpiolib: gpiochip_machine_hog: unable to get GPIO desc: -22 Add checks to filter out any line configuration outside the bounds of the bank when constructing the sim. Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> 07 June 2023, 12:49:35 UTC
44f8baa net: sched: fix possible refcount leak in tc_chain_tmplt_add() try_module_get will be called in tcf_proto_lookup_ops. So module_put needs to be called to drop the refcount if ops don't implement the required function. Fixes: 9f407f1768d3 ("net: sched: introduce chain templates") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 11:31:41 UTC
682881e net: sched: act_police: fix sparse errors in tcf_police_dump() Fixes following sparse errors: net/sched/act_police.c:360:28: warning: dereference of noderef expression net/sched/act_police.c:362:45: warning: dereference of noderef expression net/sched/act_police.c:362:45: warning: dereference of noderef expression net/sched/act_police.c:368:28: warning: dereference of noderef expression net/sched/act_police.c:370:45: warning: dereference of noderef expression net/sched/act_police.c:370:45: warning: dereference of noderef expression net/sched/act_police.c:376:45: warning: dereference of noderef expression net/sched/act_police.c:376:45: warning: dereference of noderef expression Fixes: d1967e495a8d ("net_sched: act_police: add 2 new attributes to support police 64bit rate and peakrate") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 11:28:04 UTC
de9df6c net: openvswitch: fix upcall counter access before allocation Currently, the per cpu upcall counters are allocated after the vport is created and inserted into the system. This could lead to the datapath accessing the counters before they are allocated resulting in a kernel Oops. Here is an example: PID: 59693 TASK: ffff0005f4f51500 CPU: 0 COMMAND: "ovs-vswitchd" #0 [ffff80000a39b5b0] __switch_to at ffffb70f0629f2f4 #1 [ffff80000a39b5d0] __schedule at ffffb70f0629f5cc #2 [ffff80000a39b650] preempt_schedule_common at ffffb70f0629fa60 #3 [ffff80000a39b670] dynamic_might_resched at ffffb70f0629fb58 #4 [ffff80000a39b680] mutex_lock_killable at ffffb70f062a1388 #5 [ffff80000a39b6a0] pcpu_alloc at ffffb70f0594460c #6 [ffff80000a39b750] __alloc_percpu_gfp at ffffb70f05944e68 #7 [ffff80000a39b760] ovs_vport_cmd_new at ffffb70ee6961b90 [openvswitch] ... PID: 58682 TASK: ffff0005b2f0bf00 CPU: 0 COMMAND: "kworker/0:3" #0 [ffff80000a5d2f40] machine_kexec at ffffb70f056a0758 #1 [ffff80000a5d2f70] __crash_kexec at ffffb70f057e2994 #2 [ffff80000a5d3100] crash_kexec at ffffb70f057e2ad8 #3 [ffff80000a5d3120] die at ffffb70f0628234c #4 [ffff80000a5d31e0] die_kernel_fault at ffffb70f062828a8 #5 [ffff80000a5d3210] __do_kernel_fault at ffffb70f056a31f4 #6 [ffff80000a5d3240] do_bad_area at ffffb70f056a32a4 #7 [ffff80000a5d3260] do_translation_fault at ffffb70f062a9710 #8 [ffff80000a5d3270] do_mem_abort at ffffb70f056a2f74 #9 [ffff80000a5d32a0] el1_abort at ffffb70f06297dac #10 [ffff80000a5d32d0] el1h_64_sync_handler at ffffb70f06299b24 #11 [ffff80000a5d3410] el1h_64_sync at ffffb70f056812dc #12 [ffff80000a5d3430] ovs_dp_upcall at ffffb70ee6963c84 [openvswitch] #13 [ffff80000a5d3470] ovs_dp_process_packet at ffffb70ee6963fdc [openvswitch] #14 [ffff80000a5d34f0] ovs_vport_receive at ffffb70ee6972c78 [openvswitch] #15 [ffff80000a5d36f0] netdev_port_receive at ffffb70ee6973948 [openvswitch] #16 [ffff80000a5d3720] netdev_frame_hook at ffffb70ee6973a28 [openvswitch] #17 [ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at ffffb70f06079f90 We moved the per cpu upcall counter allocation to the existing vport alloc and free functions to solve this. Fixes: 95637d91fefd ("net: openvswitch: release vport resources on failure") Fixes: 1933ea365aa7 ("net: openvswitch: Add support to count upcall packets") Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 11:25:05 UTC
886bc7d net: sched: move rtm_tca_policy declaration to include file rtm_tca_policy is used from net/sched/sch_api.c and net/sched/cls_api.c, thus should be declared in an include file. This fixes the following sparse warning: net/sched/sch_api.c:1434:25: warning: symbol 'rtm_tca_policy' was not declared. Should it be static? Fixes: e331473fee3d ("net/sched: cls_api: add missing validation of netlink attributes") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 11:19:28 UTC
abd649f Merge tag 'amdtee-fix-for-v6.5' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes AMDTEE add return origin to load TA command * tag 'amdtee-fix-for-v6.5' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: amdtee: Add return_origin to 'struct tee_cmd_load_ta' Link: https://lore.kernel.org/r/20230606075843.GA2792442@rayden Signed-off-by: Arnd Bergmann <arnd@arndb.de> 07 June 2023, 10:58:22 UTC
ca0aa17 i2c: sprd: Delete i2c adapter in .remove's error path If pm runtime resume fails the .remove callback used to exit early. This resulted in an error message by the driver core but the device gets removed anyhow. This lets the registered i2c adapter stay around with an unbound parent device. So only skip clk disabling if resume failed, but do delete the adapter. Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> 07 June 2023, 10:29:58 UTC
bf15bb3 ice: make writes to /dev/gnssX synchronous The current ice driver's GNSS write implementation buffers writes and works through them asynchronously in a kthread. That's bad because: - The GNSS write_raw operation is supposed to be synchronous[1][2]. - There is no upper bound on the number of pending writes. Userspace can submit writes much faster than the driver can process, consuming unlimited amounts of kernel memory. A patch that's currently on review[3] ("[v3,net] ice: Write all GNSS buffers instead of first one") would add one more problem: - The possibility of waiting for a very long time to flush the write work when doing rmmod, softlockups. To fix these issues, simplify the implementation: Drop the buffering, the write_work, and make the writes synchronous. I tested this with gpsd and ubxtool. [1] https://events19.linuxfoundation.org/wp-content/uploads/2017/12/The-GNSS-Subsystem-Johan-Hovold-Hovold-Consulting-AB.pdf "User interface" slide. [2] A comment in drivers/gnss/core.c:gnss_write(): /* Ignoring O_NONBLOCK, write_raw() is synchronous. */ [3] https://patchwork.ozlabs.org/project/intel-wired-lan/patch/20230217120541.16745-1-karol.kolacinski@intel.com/ Fixes: d6b98c8d242a ("ice: add write functionality for GNSS TTY") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 09:51:58 UTC
79d0150 drm/i915/selftests: Add some missing error propagation Add some missing error propagation in live_parallel_switch. To avoid needlessly burdening the various backport processes, note I am not marking it as a fix against any patches and not copying stable since it is debug/selftests only code. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Cc: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Fixes: 50d16d44cce4 ("drm/i915/selftests: Exercise context switching in parallel") Fixes: 6407cf533217 ("drm/i915/selftests: Stop using kthread_stop()") Link: https://patchwork.freedesktop.org/patch/msgid/20230605131135.396854-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 412fa1f097f48c8c1321806dd25e46618e0da147) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> 07 June 2023, 09:43:22 UTC
d636fc5 net: sched: add rcu annotations around qdisc->qdisc_sleeping syzbot reported a race around qdisc->qdisc_sleeping [1] It is time we add proper annotations to reads and writes to/from qdisc->qdisc_sleeping. [1] BUG: KCSAN: data-race in dev_graft_qdisc / qdisc_lookup_rcu read to 0xffff8881286fc618 of 8 bytes by task 6928 on cpu 1: qdisc_lookup_rcu+0x192/0x2c0 net/sched/sch_api.c:331 __tcf_qdisc_find+0x74/0x3c0 net/sched/cls_api.c:1174 tc_get_tfilter+0x18f/0x990 net/sched/cls_api.c:2547 rtnetlink_rcv_msg+0x7af/0x8c0 net/core/rtnetlink.c:6386 netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6413 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x375/0x4c0 net/socket.c:2503 ___sys_sendmsg net/socket.c:2557 [inline] __sys_sendmsg+0x1e3/0x270 net/socket.c:2586 __do_sys_sendmsg net/socket.c:2595 [inline] __se_sys_sendmsg net/socket.c:2593 [inline] __x64_sys_sendmsg+0x46/0x50 net/socket.c:2593 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffff8881286fc618 of 8 bytes by task 6912 on cpu 0: dev_graft_qdisc+0x4f/0x80 net/sched/sch_generic.c:1115 qdisc_graft+0x7d0/0xb60 net/sched/sch_api.c:1103 tc_modify_qdisc+0x712/0xf10 net/sched/sch_api.c:1693 rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6395 netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6413 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x375/0x4c0 net/socket.c:2503 ___sys_sendmsg net/socket.c:2557 [inline] __sys_sendmsg+0x1e3/0x270 net/socket.c:2586 __do_sys_sendmsg net/socket.c:2595 [inline] __se_sys_sendmsg net/socket.c:2593 [inline] __x64_sys_sendmsg+0x46/0x50 net/socket.c:2593 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 6912 Comm: syz-executor.5 Not tainted 6.4.0-rc3-syzkaller-00190-g0d85b27b0cc6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/16/2023 Fixes: 3a7d0d07a386 ("net: sched: extend Qdisc with rcu") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Buslov <vladbu@nvidia.com> Acked-by: Jamal Hadi Salim<jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 09:25:39 UTC
e3144ff Merge branch 'rfs-lockless-annotate' Eric Dumazet says: ==================== rfs: annotate lockless accesses rfs runs without locks held, so we should annotate read and writes to shared variables. It should prevent compilers forcing writes in the following situation: if (var != val) var = val; A compiler could indeed simply avoid the conditional: var = val; This matters if var is shared between many cpus. v2: aligns one closing bracket (Simon) adds Fixes: tags (Jakub) ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 09:09:05 UTC
5c3b74a rfs: annotate lockless accesses to RFS sock flow table Add READ_ONCE()/WRITE_ONCE() on accesses to the sock flow table. This also prevents a (smart ?) compiler to remove the condition in: if (table->ents[index] != newval) table->ents[index] = newval; We need the condition to avoid dirtying a shared cache line. Fixes: fec5e652e58f ("rfs: Receive Flow Steering") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 09:08:45 UTC
1e5c647 rfs: annotate lockless accesses to sk->sk_rxhash Add READ_ONCE()/WRITE_ONCE() on accesses to sk->sk_rxhash. This also prevents a (smart ?) compiler to remove the condition in: if (sk->sk_rxhash != newval) sk->sk_rxhash = newval; We need the condition to avoid dirtying a shared cache line. Fixes: fec5e652e58f ("rfs: Receive Flow Steering") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2023, 09:08:45 UTC
ab39b11 Merge tag 'for-net-2023-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fixes to debugfs registration - Fix use-after-free in hci_remove_ltk/hci_remove_irk - Fixes to ISO channel support - Fix missing checks for invalid L2CAP DCID - Fix l2cap_disconnect_req deadlock - Add lock to protect HCI_UNREGISTER * tag 'for-net-2023-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: L2CAP: Add missing checks for invalid DCID Bluetooth: ISO: use correct CIS order in Set CIG Parameters event Bluetooth: ISO: don't try to remove CIG if there are bound CIS left Bluetooth: Fix l2cap_disconnect_req deadlock Bluetooth: hci_qca: fix debugfs registration Bluetooth: fix debugfs registration Bluetooth: hci_sync: add lock to protect HCI_UNREGISTER Bluetooth: Fix use-after-free in hci_remove_ltk/hci_remove_irk Bluetooth: ISO: Fix CIG auto-allocation to select configurable CIG Bluetooth: ISO: consider right CIS when removing CIG at cleanup ==================== Link: https://lore.kernel.org/r/20230606003454.2392552-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 07 June 2023, 04:36:57 UTC
back to top